ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Items where Subject is "Materials Engineering (formerly Metallurgy)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: * | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 4832.

*

*, Ramani and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1984) Mossbauer effect studies of the thermal decomposition of iron(II) oxalate in hydrogen. In: Materials Chemistry and Physics, 9 (6). pp. 539-559.

*, Shrihari and Kumar, R and Gandhi, KS and Natarajan, KA (1991) Role of cell attachment in leaching of chalcopyrite mineral by Thiobacillus ferrooxidans. In: Applied Microbiology and Biotechnology, 36 (2). pp. 278-282.

A

Aashia, R and Madhav, KV and Ramamurty, U and Asokan, S (2009) Nanoindentation study on germania-doped silica glass preforms: evidence for the compaction-densification model of photosensitivity. In: Optics Letters, 34 (16). pp. 2414-2416.

Aashranth, B and Shankar, G and Davinci, MA and Samantaray, D and Borah, U and Suwas, S (2021) The effect of crystallographic orientation and interfaces on thermo-mechanical softening of a martensitic steel. In: Journal of Materials Research .

Aashranth, B and Shankar, G and Samantaray, D and Suwas, S (2022) The Role of Hot Deformation Texture on Dynamic Transformation of Austenite to Ferrite in a 9%Cr Alloy Steel. In: JOM .

Abebe, G and Jafo, G and Adhikary, GD and De, GD and Ranjan, R and Mishra, A (2020) Microstructural, structural, dielectric, piezoelectric and energy storage properties of 0.2 wt% MnO2 doped (0.94-x)Na0.5Bi0.5TiO3–0.06BaTiO3-xK0.5Na0.5NbO3 ceramics (0 ≤ x ≤ 0.08). In: SN Applied Sciences, 2 (12).

Abebe, Mulualem and Brajesh, Kumar and Malhotra, Jaskaran Singh and Ranjan, Rajeev (2018) Rayleigh analysis of domain dynamics across temperature induced polymorphic phase transitions in lead-free piezoceramics (1-&ITx&IT)(BaTi0.88Sn0.12)-&ITx&IT(Ba0.7Ca0.3)TiO3. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 51 (18).

Abebe, Mulualem and Brajesh, Kumar and Mishra, Anupam and Senyshyn, Anatoliy and Ranjan, Rajeev (2017) Structural perspective on the anomalous weak-field piezoelectric response at the polymorphic phase boundaries of (Ba, Ca)(Ti, M)O-3 lead-free piezoelectrics (M = Zr, Sn, Hf). In: PHYSICAL REVIEW B, 96 (1).

Abebe, Mulualem and Brajesh, Kumar and Ranjan, Rajeev (2017) Correlation between structure and Rayleigh parameters in the lead-free piezoceramic (1-x)Ba(Ti0.88Sn0.12)O-3-x(Ba0.7Ca0.3)TiO3. In: JOURNAL OF APPLIED PHYSICS, 122 (3).

Abhilash, GP and Sharma, D and Bose, S and Shivakumara, C (2023) PANI-wrapped BaFe12O19 and SrFe12O19 with rGO composite materials for electromagnetic interference shielding applications. In: Heliyon, 9 (3).

Abhilash, GP and Sharma, D and Bose, S and Shivakumara, C (2023) Synthesis of rGO-Fe3O4 and La4BaCu5O13.10 and their polymer composites for electromagnetic interference shielding applications. In: Diamond and Related Materials, 138 .

Abhilash, GP and Sushmita, K and Bose, S and Shivakumara, C (2023) Functionalization of dielectric BaTiO3 and semiconducting ZnO nanoparticles on rGO layers and their polymer composites: Applications in EMI shielding. In: Synthetic Metals, 297 .

Abinandanan, TA (1997) Computer modelling of elastic stress effects during precipitation. In: India-Japan Seminar on New Materials, 21-22 Oct. 1996, Hyderbad, India, pp. 901-908.

Abinandanan, TA and Haider, F and Martin, G (1994) Monte Carlo simulations of precipitation of $L1_2$. In: Proceedings of an International Conference on Solid-Solid Phase Transformations, 17-22 July 1994, Framington, PA, USA, pp. 443-448.

Abinandanan, TA and Haider, F and Martin, G (1995) Phase transformations involving ordering and phase separation: a Monte Carlo study. In: Non Linear Phenomena in Materials Science III. Instabilities and Patterning. Indo-French Workshop on Instabilities and Patterning and of the International Meeting on Non Linear Phenomena in Materials Science, Dec. 1994, Switzerland, pp. 87-95.

Abinandanan, TA and Raju, AP and Rajesh, M (1999) Monte Carlo study of precipitation of two phases in a ternary alloy. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 753-756.

Abinandanan, TA and Sankarasubramanian, R and Jog, CS (1999) Equilibrium shapes of coherent, misfitting precipitate. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 541-544.

Abinandanan, TA (1995) On the spurious increase in particle volume fraction during coarsening simulations. In: Philosophical Magazine Letters, 71 (4). pp. 229-235.

Abinandanan, TA and Haider, F (2001) An extended Cahn-Hilliard model for interfaces with cubic anisotropy. In: Philosophical Magazine A & B, 81 (10). pp. 2457-2479.

Abinandanan, TA and Haider, F and Martin, G (1998) Computer simulations of diffusional phase transformations: Monte Carlo algorithm and application to precipitation of ordered phases. In: Acta Materialia, 46 (12). pp. 4243-4255.

Abinandanan, TA and Johnson, WC (1995) Development of spatial correlations during coarsening. In: of the Indo-US Workshop on Nucleation and Growth in Solids, 14-16 March 1994, Bangalore, India, pp. 169-176.

Abraham, Jiji and Arif, Mohammed and Xavier, Priti and Bose, Suryasarathi and George, Soney C. and Kalarikkal, Nandakumar and Thomas, Sabu (2017) Investigation into dielectric behaviour and electromagnetic interference shielding effectiveness of conducting styrene butadiene rubber composites containing ionic liquid modified MWCNT. In: POLYMER, 112 . pp. 102-115.

Acharya, M and Mondol, S and Mandal, A (2020) Development of high strength suction cast hypereutectic Al�20Si alloy containing gamma alumina and strontium. In: Materials Science and Technology (United Kingdom), 36 (5). pp. 623-630.

Acharya, S and Bahl, S and Chatterjee, K and Suwas, S (2018) Variant selection in metastable β Ti-V-Fe-Al alloy during triaxial and uniaxial compression. In: Materialia, 4 . pp. 20-32.

Acharya, S and Gopal, V and Gupta, SK and Nilawar, S and Manivasagam, G and Suwas, S and Chatterjee, K (2022) Anisotropy of Additively Manufactured Co-28Cr-6Mo Influences Mechanical Properties and Biomedical Performance. In: ACS Applied Materials and Interfaces, 14 . pp. 21906-21915.

Acharya, S and Hajra, JP (2005) Activities of Al in the Al + Ga + Bi + Sb system in the temperature range (1173 to 1323) K. In: The Journal of Chemical Thermodynamics, 37 (2). pp. 169-174.

Acharya, S and Hajra, JP (2004) Applicability of a multiparameter formalism in interpreting the thermodynamic behaviour of ternary systems. In: Transactions of the Indian Institute of Metals, 57 (2). pp. 95-102.

Acharya, S and Hajra, JP (2005) Thermodynamic modelling of phase equilibria in Al-Ga-P-As system. In: Bulletin of Materials Science, 28 (2). pp. 179-185.

Acharya, S and Hajra, JP (2004) Thermodynamics and phase equilibria in the Al–Bi–Sb system. In: The Journal of Chemical Thermodynamics, 36 (7). pp. 583-591.

Acharya, S and Hajra, JP and Aldinger, Fritz (2004) Study of the solid–liquid equilibria in the Ga–In–As–Sb system at 973 and 1073K. In: Materials Chemistry and Physics, 87 (1). pp. 127-133.

Acharya, S and Mishra, S and Yazar, KU and Chatterjee, K and Suwas, S (2020) Evolution of Deformation Texture in Low Modulus β Ti-34Nb-2Ta-(0, 3)Zr-0.5O Alloys. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4045-4058.

Acharya, S and Panicker, AG and Gopal, V and Dabas, SS and Manivasagam, G and Suwas, S and Chatterjee, K (2020) Surface mechanical attrition treatment of low modulus Ti-Nb-Ta-O alloy for orthopedic applications. In: Materials Science and Engineering C, 110 .

Acharya, S and Soni, R and Suwas, S and Chatterjee, K (2021) Additive manufacturing of Co�Cr alloys for biomedical applications: A concise review. In: Journal of Materials Research .

Acharya, S and Suwas, S and Chatterjee, K (2021) Review of recent developments in surface nanocrystallization of metallic biomaterials. In: Nanoscale, 13 (4). pp. 2286-2301.

Acharya, Srijan and Bahl, Sumit and Dabas, Shaurya Singh and Hassan, Suhail and Gopal, Vasanth and Panicker, Arpana Gopi and Manivasagam, Geetha and Suwas, Satyam and Chatterjee, Kaushik (2019) Role of aging induced alpha precipitation on the mechanical and tribocorrosive performance of a beta Ti-Nb-Ta-O orthopedic alloy. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 103 .

Acharya, Srijan and Gupta, Praveen and Chatterjee, Kaushik and Suwas, Satyam (2018) Microstructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta Alloy. In: 10th International Conference on Processing and Manufacturing of Advanced Materials, 2018, 9-13 July, 2018, Paris; France, pp. 2465-2470.

Acharya, Srijan and Panicker, Arpana Gopi and Laxmi, Devara Vijaya and Suwas, Satyam and Chatterjee, Kaushik (2019) Study of the influence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications. In: MATERIALS & DESIGN, 164 .

Adamo, CG and Srivastava, A and Legese, SS and Kumar, D and Kawamura, Y and Serbesa, AT and Punathil Raman, S and Olu, FE and Tiwary, CS and Singh, AK and Chattopadhyay, K (2024) Integrated First Principles and Experimental Investigation of Thermoelectric Transport in Zr/Ti Half-Heusler-Type High Entropy Alloys. In: Energy Technology .

Adamu, M and Jacob, KT and Kale, GM (2020) Assessment of MgZr4P6O24 as a Solid Electrolyte for Sensing Mg in Molten Non-Ferrous Alloys. In: Journal of the Electrochemical Society, 167 (2).

Adhila, TK and Elangovan, H and John, S and Chattopadhyay, K and Barshilia, HC (2020) Engineering the Microstructure of Silicon Nanowires by Controlling the Shape of the Metal Catalyst and Composition of the Etchant in a Two-Step MACE Process: An In-Depth Analysis of the Growth Mechanism. In: Langmuir, 36 (32). pp. 9388-9398.

Adukkadan, A and Ranjan, R and Kumar, V (2024) High pyroelectric performance and its dependence on the field-induced orientation in antiferroelectric PLZST system. In: Journal of the American Ceramic Society .

Advaith, S and Parida, DR and Aswathi, KT and Dani, N and Chetia, UK and Chattopadhyay, K and Basu, S (2021) Experimental investigation on single-medium stratified thermal energy storage system. In: Renewable Energy, 164 . pp. 146-155.

Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.

Agarwal, Vipul and Chatterjee, Kaushik (2018) Recent advances in the field of transition metal dichalcogenides for biomedical applications. In: NANOSCALE, 10 (35). pp. 16365-16397.

Agarwal, Vipul and Panicker, Arpana Gopi and Indrakumar, Sushma and Chatterjee, Kaushik (2019) Comparative study of keratin extraction from human hair. In: INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 133 . pp. 382-390.

Agarwal, Vipul and Panicker, Arpana Gopi and Indrakumar, Sushma and Chatterjee, Kaushik (2019) Comparative study of keratin extraction from human hair. In: INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 133 . pp. 382-390.

Agarwal, Vipul and Varghese, Neethu and Dasgupta, Subho and Sood, A K and Chatterjee, Kaushik (2019) Engineering a 3D MoS2 foam using keratin exfoliated nanosheets. In: CHEMICAL ENGINEERING JOURNAL, 374 . pp. 254-262.

Agepati, S and Ghosh, P and Chokshi, AH (2016) Microstructural evolution and strength variability in microwires. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 652 . pp. 239-249.

Agrawal, P and Karthikeyan, S and Makineni, SK and Gault, B and Banerjee, D (2022) Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling. In: Acta Materialia, 222 .

Agrawal, P and Kumar, H and Kumar, P (2020) Rapid and even spreading of complex fluids over a large area in porous substrates. In: Applied Physics Letters, 117 (7).

Agrawal, Priyanka and Karthikeyan, S (2015) Enhancement in Strain Hardening on Boron Addition in As-Cast Ti-6Al-4V Alloy. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 68 (2, SI). S195-S205.

Agrawalla, RK and Meriga, V and Paul, R and Chakraborty, AK and Mitra, AK (2016) Solvothermal synthesis of a polyaniline nanocomposite - a prospective biosensor electrode material. In: EXPRESS POLYMER LETTERS, 10 (9). pp. 780-787.

Ahamad, Niyaz M and Varma, KBR (2010) Structural and optical properties of (100-x)Li2B4O7 center dot x(Ba5Li2Ti2Nb8O30) glasses and glass nanocrystal composites. In: Dalton Transactions (2003), 39 (19). pp. 4624-4630.

Ahamad, Niyaz M and Varma, KBR (2009) Optical Properties of Nanocrystalline Potassium Lithium Niobate in the Glass System (100-x) TeO2-x(1.5K(2)O-Li2O-2.5Nb(2)O(5)). In: Journal of Nanoscience and Nanotechnology, 9 (8). pp. 4910-4917.

Aher, R and Gaikwad, P and Punde, A and Shinde, P and Waghmare, A and Hase, Y and Shah, S and Bade, B and Rahane, S and Ladhane, S and Doiphode, V and Rondiya, S and Prasad, M and Jadkar, S (2023) An experimental and theoretical approach for temperature-dependent Raman-active optical phonons driven thermal conductivity of layered PbBi2Se4 nano-flowers. In: Journal of Materials Science: Materials in Electronics, 34 (18).

Ahuja, S and Kutty, TRN (1996) Nanoparticles of SrTiO3 prepared by gel to crystallite conversion and their photocatalytic activity in the mineralization of phenol. In: Journal of Photochemistry and Photobiology A: Chemistry, 97 (1-2). 99-107 .

Ajay Kumar, P and Perugu, CS (2018) Synthesis of fecrvnbmn high entropy alloy by mechanical alloying and study of their microstructure and mechanical properties. In: 147th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society, TMS 2018, 11 - 15 March 2018, Phoenix, pp. 669-675.

Ajikumar, PK and Kamruddin, M and Shankar, P and Gouda, Ramakrishna and Balamurugan, AK and Nithya, R and Tyagi, AK and Jayaram, V and Biswas, SK and Raj, Baldev (2009) Internal nitride formation during gas-phase thermal nitridation of titanium. In: Scripta Materialia, 61 (4). pp. 403-406.

Ajisafe, VA and Raichur, AM (2023) Snail Mucus from Achatina fulica as a Biomaterial Exhibits Pro-Survival Effects on Human Chondrocytes. In: ACS Biomaterials Science and Engineering .

Ajisafe, VA and Raichur, AM (2024) Snail Mucus-Enhanced Adhesion of Human Chondrocytes on 3D Porous Agarose Scaffolds. In: ACS Applied Materials and Interfaces, 16 (9). pp. 11324-11335.

Akbarzadeh, Alireza and Brajesh, Kumar and Nahas, Yousra and Kumar, Naveen and Prokhorenko, Sergei and Swain, Diptikanta and Prosandeev, Sergey and Walter, Raymond and Kornev, Igor and Iniguez, Jorge and Dkhil, Brahim and Ranjan, Rajeev and Bellaiche, L (2018) Quantum-fluctuation-stabilized orthorhombic ferroelectric ground state in lead-free piezoelectric (Ba, Ca)(Zr, Ti)O-3. In: PHYSICAL REVIEW B, 98 (10).

Akila, R and Jacob, KT and Shukla, AK (1987) Gibbs energies of formation of rare earth oxysulfides. In: Metallurgical and Materials Transactions B, 18 (1). pp. 163-168.

Akila, R and Jacob, KT (1987) Combined homo-hetero doping for enhancement of ionic conductivity. In: Solid State Ionics, 25 (2-3). pp. 217-221.

Akila, R and Jacob, KT (1988) High temperature stability of oxysulfides containing Ce3+ and Y3+ ions. In: Ceramics International, 14 (3). pp. 147-152.

Akila, R and Jacob, KT (1989) An SOx (x = 2, 3) sensor using ?-alumina/Na2SO4 couple. In: Sensors and Actuators, 16 (4). pp. 311-323.

Akila, R and Jacob, KT (1988) Use of the Nasicon/Na2SO4 couple in a solid state sensor for SOx (x=2,3). In: Journal of Applied Electrochemistry, 18 (2). pp. 245-251.

Akila, R and Jacob, KT (1990) The mobility of oxygen ions in CaF2. In: Journal of Applied Electrochemistry, 20 (2). pp. 294-300.

Akila, R and Jacob, KT and Shukla, AK (1987) Standard free energies of formation of rare earth sesquisulphides. In: Journal of Materials Science, 22 (6). pp. 2087-2093.

Al-Samman, Talal and Molodov, Konstantin D and Molodov, Dmitri A and Gottstein, Guenter and Suwas, Satyam (2012) Softening and dynamic recrystallization in magnesium single crystals during c-axis compression. In: Acta Materialia, 60 (2). pp. 537-545.

Alam, Md Zafir and Chatterjee, D and Kamat, SV and Jayaram, V and Das, DK (2010) Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test method. In: Materials Science and Engineering A, 527 (26). pp. 7147-7150.

Alam, Md Zafir and Kamat, SV and Jayaram, V and Das, DK (2014) Micromechanisms of fracture and strengthening in free-standing Pt-aluminide bond coats under tensile loading. In: ACTA MATERIALIA, 67 . pp. 278-296.

Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Study of Brittle-to-ductile-transition in Pt-aluminide bond coat using micro-tensile testing method. In: Transactions of the Indian Institute of Metals, 64 (1-2). pp. 57-61.

Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Hazari, N and Das, DK (2010) Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature. In: Materials Science and Engineering A, 527 (3). pp. 842-848.

Alam, Zafir Md and Chatterjee, Debarati and Muraleedharan, K and Nandy, TK and Kamat, SV and Jayaram, V and Das, DK (2011) Effect of Strain Rate on Ductile-to-Brittle Transition Temperature of a Free-Standing Pt-Aluminide Bond Coat. In: Metallurgical and Materials Transactions A, 42 (6). pp. 1431-1434.

Alam, Zafir Md and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Microtensile testing of a free-standing Pt-aluminide bond coat. In: Materials & Design, 32 (3). pp. 1242-1252.

Alaneme, KK and Hong, SM and Sen, Indrani and Fleury, E and Ramamurty, U (2010) Effect of copper addition on the fracture and fatigue crack growth behavior of solution heat-treated SUS 304H austenitic steel. In: Materials Science and Engineering: A, 527 (18-19). pp. 4600-4604.

Alaneme, KK and Ramamurty, U and Bello, O (2013) Hardening and corrosion behaviour of copper added SUS 304H austenitic steels subjected to thermal cycling. In: Kovove materialy - Metallic Materials, 51 (1). pp. 25-30.

Alaneme, Kenneth Kanayo (2011) Influence of Tempered Microstructures on the Transformation Behaviour of Cold Deformed and Intercritically Annealed Medium Carbon Low Alloy Steel. In: Materials Research, 13 (2). pp. 203-209.

Alcock, CB and Jacob, KT (1974) Reply to ‘Variation of the excess chemical potential with atom fraction of polyvalent solute in alloys of copper, silver and gold. In: Scripta Metallurgica, 8 . pp. 1389-1394.

Alcock, CB and Jacob, KT (1977) Solubility and activity of oxygen in liquid gallium and gallium copper alloys. In: Journal of the Less Common Metals, 53 (2). pp. 211-222.

Alcock, CB and Jacob, KT (1974) Solute solute and solvent solute interactions in solid solutions of Cu+Sn, Au+Sn and Cu+Au+Sn alloys. In: Acta Metallurgica, 22 (5). pp. 539-544.

Alcock, CB and Jacob, KT and Fitzner, K (1977) An entropy meter based on the thermoelectric potential of a nonisothermal solid electrolyte cell. In: The Journal of Chemical Thermodynamics, 9 (11). pp. 1011-1020.

Alcock, CB and Palamutçu, T and Jacob, KT (1973) Thermodynamics of solid solutions of silver with indium and tin. In: Acta Metallurgica, 21 (7). 1003-1009 .

Alcock, CB and Zador, S and Jacob, KT (1976) Zirconium: Physico chemical properties of its compounds and alloys. In: UNSPECIFIED, 1976, Vienna.

Alex, Sherine and Basu, Bikramjit and Sengupta, Sanchita and Pandey, Upendra K and Chattopadhyay, Kamanio (2016) Electrodeposition of delta-phase based Cu-Sn mirror alloy from sulfate-aqueous electrolyte for solar reflector application. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 1003-1010.

Alex, Sherine and Chattopadhyay, Kamanio and Basu, Bikramjit (2016) Tailored specular reflectance properties of bulk Cu based novel intermetallic alloys. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 149 . pp. 66-74.

Alex, Sherine and Kumar, Ranjith and Chattopadhyay, Kamanio and Barshilia, Harish C and Basu, Bikramjit (2019) Thermally evaporated Cu-Al thin film coated flexible glass mirror for concentrated solar power applications. In: MATERIALS CHEMISTRY AND PHYSICS, 232 . pp. 221-228.

Aliyu, A and Gupta, A and Srivastava, C (2022) Correlation Between Texture, Grain Boundary Constitution, and Corrosion Behavior of Ni-Cu Coatings. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Aliyu, A and Sai Jyotheender, K and Srivastava, C (2021) Texture and grain boundary engineering in nickel coating with tungsten addition and its effect on the coating corrosion behavior. In: Surface and Coatings Technology, 412 .

Aliyu, A and Srivastava, C (2020) Correlation between growth texture, crystallite size, lattice strain and corrosion behavior of copper-carbon nanotube composite coatings. In: Surface and Coatings Technology .

Aliyu, A and Srivastava, C (2021) Corrosion behavior and protective film constitution of AlNiCoFeCu and AlCrNiCoFeCu high entropy alloy coatings. In: Surfaces and Interfaces, 27 .

Aliyu, A and Srivastava, C (2022) Electron Microscopy of Magnetic Nanoparticles: Understanding Synthesis Mechanism and Evoluation of Size-Composition Correlations. [Book Chapter]

Aliyu, A and Srivastava, C (2019) Microstructure and corrosion properties of MnCrFeCoNi high entropy alloy-graphene oxide composite coatings. In: Materialia, 5 .

Aliyu, A and Srivastava, C (2021) Microstructure and electrochemical properties of FeNiCoCu medium entropy alloy-graphene oxide composite coatings. In: Journal of Alloys and Compounds, 864 .

Aliyu, A and Srivastava, C (2020) Morphology and corrosion properties of FeMn-Graphene oxide composite coatings. In: Journal of Alloys and Compounds, 821 .

Aliyu, A and Srivastava, C (2022) Phase constitution, surface chemistry and corrosion behavior of electrodeposited MnFeCoNiCu high entropy alloy-graphene oxide composite coatings. In: Surface and Coatings Technology, 429 .

Aliyu, Ahmed and Rekha, MY and Srivastava, Chandan (2019) Microstructure-electrochemical property correlation in electrodeposited CuFeNiCoCr high-entropy alloy-graphene oxide composite coatings. In: PHILOSOPHICAL MAGAZINE, 99 (6). pp. 718-735.

Aliyu, Ahmed and Srivastava, Chandan (2019) Microstructure-corrosion property correlation in electrodeposited AlCrFeCoNiCu high entropy alloys-graphene oxide composite coatings. In: THIN SOLID FILMS, 686 .

Allen, CM and Kumar, S and Cama, H and O'Reilly, KAQ and Carroll, L (2001) Electron beam surface melting of model 1200 Al alloys. In: Materials Science and Engineering: A, 304-6 . pp. 604-607.

Allibert, M and Lourtau, R and Jacob, KT and Chatillon, C (1981) Mass spectrometric and electrochemical studies of thermodynamic properties of liquid and solid phases in the CaO Al2O3 system. In: Journal of the American Ceramic Society, 64 (5). pp. 307-314.

Alok, Singh and Ranganathan, S (1994) Rational approximants to the decagonal phase in Al-Mn-M (M=Ni,Cu,Zn) systems. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 754-757.

Ambat, R and Dwarakadasa, ES (1994) Studies on the influence of chloride ion and pH on the electrochemical behaviour of aluminium alloys 8090 and 2014. In: Journal of Applied Electrochemistry, 24 (9). pp. 911-916.

Ambat, R and Prasad, Krishna R and Dwarakadasa, ES (1995) The influence of aging at $180^o\hspace{2mm}C$ on the corrosion behaviour of a ternary Al---Li---Zr alloy. In: Corrosion Science, 37 (8). pp. 1253-1265.

Ambat, Rajan and Dwarakadasa, ES (1992) The influence of pH on the corrosion of medium strength aerospace alloys 8090, 2091 and 2014. In: Corrosion Science, 33 (5). pp. 681-690.

Anand, A and Ghosh, SK and Prusty, RK (2020) Effects of seawater absorption and desorption on the long-term creep performance of graphene oxide embedded glass fiber/epoxy composites. In: Polymer Composites .

Anand, G and Barai, K and Madhavan, R and Chattopadhyay, PP (2015) Evolution of annealing texture in cryo-rolled copper. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 638 . pp. 114-120.

Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear., 85 (2). pp. 163-169.

Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear, 85 (2). pp. 163-169.

Anand, K and Varghese, Siby and Kurian, Thomas and Bose, Suryasarathi (2018) Effect of starch nanocrystals on natural rubber latex vulcanizate properties. In: PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 34 (2). pp. 75-87.

Anand, N and Sankaran, S and Madhavan, R and Suwas, Satyam and Venugopal, P (2015) Microstructural Dependence of Work Hardening Behavior in Martensite-Ferrite Microalloyed Steels. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 517-528.

Anand, Phalguni and Modak, Jayant M and Natarajan, KA (1996) Biobeneficiation of bauxite using Bacillus polymyxa: calcium and iron removal. In: International Journal of Minral Processing, 48 (1-2). pp. 51-60.

Anandh, Subramaniam and Ranganathan, S (2001) Modulated structures, nanocrystals and quasicrystals in Mg-Zn-Y alloys. In: Quasicrystals - Preparation, Properties and Applications. Symposium, 27-30 Nov. 2000, Boston, MA, USA, K4.4.1-K4.4.7.

Anandhakumar, S and Debapriya, M and Nagaraja, V and Raichur, Ashok M (2011) Polyelectrolyte microcapsules for sustained delivery of water-soluble drugs. In: Materials Science and Engineering: C, 31 (2). pp. 342-349.

Anandhakumar, S and Gokul, P and Raichur, AM (2016) Stimuli-responsive weak polyelectrolyte multilayer films: A thin film platform for self triggered multi-drug delivery. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 58 . pp. 622-628.

Anandhakumar, S and Krishnamoorthy, G and Ramkumar, KM and Raichur, AM (2017) Preparation of collagen peptide functionalized chitosan nanoparticles by ionic gelation method: An effective carrier system for encapsulation and release of doxorubicin for cancer drug delivery. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 70 (1). pp. 378-385.

Anandhakumar, S and Mahalakshmi, V and Raichur, Ashok M (2012) Silver nanoparticles modified nanocapsules for ultrasonically activated drug delivery. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 32 (8). pp. 2349-2355.

Anandhakumar, S and Nagaraja, V and Raichur, Ashok M (2010) Reversible polyelectrolyte capsules as carriers for protein delivery. In: Colloids and Surfaces B: Biointerfaces, 78 (2). pp. 266-274.

Anandhakumar, S and Raichur, Ashok M (2011) PSS-doped nanostructured polyelectrolyte capsules for delivery of proteins. In: Abstracts of Papers - American Chemical Society, National Meeting, 242 .

Anandhakumar, S and Raichur, Ashok M (2013) Polyelectrolyte/silver nanocomposite multilayer films as multifunctional thin film platforms for remote activated protein and drug delivery. In: ACTA BIOMATERIALIA, 9 (11). pp. 8864-8874.

Anandhakumar, S and Raichur, Ashok M (2011) A facile route to synthesize silver nanoparticles in polyelectrolyte capsules. In: Colloids and Surfaces B: Biointerfaces, 84 (2). pp. 379-383.

Anandhakumar, S and Sasidharan, MS and Tsao, Cheng-Wen and Raichur, Ashok M (2014) Tailor-Made Hollow Silver Nanoparticle Cages Assembled with Silver Nanoparticles: An Efficient Catalyst for Epoxidation. In: ACS APPLIED MATERIALS & INTERFACES, 6 (5). pp. 3275-3281.

Anandhakumar, S and Vijayalakshmi, SP and Jagadeesh, G and Raichur, Ashok M (2011) Silver Nanoparticle Synthesis: Novel Route for Laser Triggering of Polyelectrolyte Capsules. In: ACS Applied Materials & Interfaces, 3 (9). pp. 3419-3424.

Ananthanarayanan, L and Lahiri, AK (1992) An ADI enthalpy method for two dimensional solidification. In: International Communications in Heat and Mass Transfer, 19 (5). pp. 629-637.

Anantharamaiah, P.N and Mondal, Sanjukta and Manasa, K S and Saha, Sujoy and Pai, Maya M (2020) Enhancing the catalytic activity of recyclable nanocrystalline NiFe2O4 by replacing Ni by Cu. In: CERAMICS INTERNATIONAL, 46 (1). pp. 1220-1226.

Anantharamaiah, PN and Mondal, S and Saha, S (2020) Inducing the Catalytic Activity in SrFe12O19 Via Chemical Modification. In: Catalysis Letters .

Anantharamaiah, PN and Shashanka, HM and Saha, S and Chelvane, JA and Sahoo, B (2021) Enabling cobalt ferrite (CoFe2O4) for low magnetic field strain responsivity through Bi3+ substitution: Material for magnetostrictive sensors. In: Journal of Alloys and Compounds, 877 .

Anantharamaiah, PN and Shashanka, HM and Saha, S and Haritha, K and Ramana, CV (2022) Aluminum Doping and Nanostructuring Enabled Designing of Magnetically Recoverable Hexaferrite Catalysts. In: ACS Omega, 7 (8). 6549 -6559.

Ananthasivan, K and Kaliappan, I and Anthonysamy, S and Chandramouli, V and Rao, PRV and Mathews, CK and Jacob, KT (1996) Gibbs energies of formation of UMoC1.7 and UMoC2. In: Journal of Alloys and Compounds, 245 (1-2). pp. 40-46.

Ananthasivan, K and Kaliappan, I and Anthonysamy, S and Rao, PRV and Mathews, CK and Jacob, KT (1997) Stabilities of ternary carbides UWC1.75 and UWC2. In: High Temperature Materials and Processes, 16 (4). 255-260 .

Ananthasivan, K and Rao, Vasudeva PR and Mathews, CK and Jacob, KT and Chandramouli, V and Kaliappan, I and Anthonysamy, S (1994) Carbon potential measurements on some actinide carbides. In: UNSPECIFIED, 1994, The Minerals, Metals & Materials Society.

Ananthraj, S and Varma, KBR and Rao, KJ (1988) Electrical properties of silver pyrophosphate glass. In: Solid State Ionics, 27 (1-2). pp. 5-9.

Anbalagan, R and Rogl, Gerda and Zehetbauer, Michael and Sharma, Amit and Rogl, Peter and Suwas, Satyam and Mallik, Ramesh Chandra (2014) Effect of High-Pressure Torsion on Texture, Microstructure, and Raman Spectroscopy: Case Study of Fe- and Te-Substituted CoSb3. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (10). pp. 3817-3823.

Anbazhagan, P and Sheikh, Neaz M and Parihar, Aditya (2013) Influence of Rock Depth on Seismic Site Classification for Shallow Bedrock Regions. In: NATURAL HAZARDS REVIEW, 14 (2). pp. 108-121.

Andrade, UR and Meyersa, MA and Chokshi, AH (1994) Constitutive description of work- and shock-hardened copper. In: Scripta metallurgica et materialia, 30 (7). pp. 933-938.

Angappan, M and Bora, PJ and Hs, MJ and Kj, V and Kishore, B and Ramamurthy, PC and Vijayaraju, K (2018) PDMS-Ni coated flyash cenosphere composite for broadband microwave absorption. In: 4th Kishore Indian Institute of Science, Department of Materials EngineeringIEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Angappan, M and Bora, PJ and Vinoy, KJ and Kishore, . and Vijayaraju, K and Ramamurthy, PC (2020) Microwave absorption efficiency of poly (vinyl-butyral)/Ultra-thin nickel coated fly ash cenosphere composite. In: Surfaces and Interfaces, 19 .

Angappan, M and Bora, PJ and Vinoy, KJ and Ramamurthy, PC and Vijayaraju, K (2018) Tailorable electromagnetic interference shielding using nickel coated glass fabric-epoxy composite with excellent mechanical property. In: Composites Communications, 10 . pp. 110-115.

Angulakshmi, N and Kar, Goutam Prasanna and Bose, Suryasarathi and Gowd, E Bhoje and Thomas, Sabu and Stephan, A Manuel (2016) A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries. In: Materials Chemistry Frontiers, 1 (2). pp. 269-277. ISSN 2052-1537

Anifowoshe, AT and Mukherjee, A and Ajisafe, VA and Raichur, AM and Nongthomba, U (2024) Synthesis and characterization of micro-sized polyisobutylene and evaluation of its toxicological effects on the development and homeostasis of zebrafish (Danio rerio). In: Scientific Reports, 14 (1).

Anil, AG and Ramachandran, S and Kumar, V and Subramanian, S and Ramamurthy, PC (2022) Chromium (VI) detection by microbial carbon dots: Microwave synthesis and mechanistic study. In: Journal of Basic Microbiology, 62 (3-4). pp. 455-464.

Anil, AG and Ramamurthy, PC and Subramanian, S and Sivry, Y (2018) Hexylthiophene based Conjugated Polymer Metal-ion Sensor. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Anil, AG and Sunil Kumar Naik, TS and Subramanian, S and Ramamurthy, PC (2021) A novel non-enzymatic urea sensor based on the nickel complex of a benzimidazoyl pyridine derivative. In: Journal of Electroanalytical Chemistry, 883 .

Anil, AG and Swaraj, S and Subramanian, S and Ramamurthy, PC (2021) Analysis of Cr(VI) bioremediation by citrobacter freundii using synchrotron soft x-ray scanning transmission x-ray microscopy. In: Quantum Beam Science, 5 (4).

Anilchandra, AR and Surappa, MK (2010) Influence of tool rake angle on the quality of pure magnesium chip-consolidated product. In: Journal of Materials Processing Technology, 210 (3). pp. 423-428.

Anilchandra, AR and Surappa, MK (2012) Microstructure and damping behaviour of consolidated magnesium chips. In: Materials Science and Engineering: A, 542 . pp. 94-103.

Anilchandra, AR and Surappa, MK (2013) Microstructure and tensile properties of consolidated magnesium chips. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . 759-766.

Anilchandra, Adamane R and Basu, Ritwik and Samajdar, Indradev and Surappa, Mirle K (2012) Microstructure and compression behavior of chip consolidated magnesium. In: JOURNAL OF MATERIALS RESEARCH, 27 (4). pp. 709-719.

Anjaneya, KC and Singh, Mahander Pratap (2017) Synthesis and properties of gadolinium doped ceria electrolyte for IT-SOFCs by EDTA-citrate complexing method. In: JOURNAL OF ALLOYS AND COMPOUNDS, 695 . pp. 871-876.

Anthonysamy, S and Ananthasivan, K and Kaliappan, I and Chandramouli, V and Rao, PRV and Mathews, CK and Jacob, KT (1996) Gibbs energies of formation of chromium carbides. In: Metallurgical and Materials Transactions A, 27 (7). pp. 1919-1924.

Anthonysamy, S and Ananthasivan, K and Kaliappan, I and Chandramouli, W and Rao, Vasudeva PR and Mathews, CK and Jacob, KT (1995) Chemical potential of carbon in the system U-Pu-C-O-N: Measurements and calculation. In: Journal of Nuclear Materials, 223 (1). pp. 20-27.

Antony, AJ and Balaraman, AA and Dutta, S (2024) Enhanced piezoelectric properties in europium-doped lead lanthanum zirconate titanate thin films. In: Thin Solid Films, 790 .

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3). 035028.

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3).

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: a finite element analysis. In: SMART MATERIALS AND STRUCTURES, 28 (3).

Anuja, J and Narasimhan, R and Ramamurty, U (2020) An Expanding Cavity Model for Indentation Analysis of Shape Memory Alloys. In: Journal of Applied Mechanics, Transactions ASME, 87 (3).

Anuja, J and Narasimhan, R and Ramamurty, U (2019) A numerical study of the indentation mechanics of shape memory alloys in different temperature regimes. In: MECHANICS OF MATERIALS, 139 .

Anupama, AV and Kumaran, Viswanathan and Sahoo, Balaram (2019) Synthesis of highly magnetic Mn-Zn ferrite (Mn0.7Zn0.3Fe2O4) ceramic powder and its use in smart magnetorheological fluid. In: RHEOLOGICA ACTA, 58 (5). pp. 273-280.

Anuradha, TV (2010) Template-Assisted Sol-Gel Synthesis of Nanocrystalline BaTiO3. In: E-Journal of Chemistry, 7 (3). pp. 894-898.

Anuradha, TV and Ranganathan, S (2007) Nanocrystalline $TiO_2$ by three different synthetic approaches: A comparison. In: Bulletin of Materials Science, 30 (3). pp. 263-269.

Anuradha, TV and Ranganathan, S (1999) Synthesis of mesoporous materials based on titanium(IV)oxide and titanium nitride. In: Nanostructured Materials, 12 (5-8). pp. 1063-1069.

Anuradha, TV and Ranganathan, S and Mimani, T and Patil, KC (2001) Combustion synthesis of nanostructured barium titanate. In: Scripta Materialia, 44 (8-9). pp. 2237-2241.

Aoki, K and Li, XG and Chattopadhyay, K and Masumoto, T (1988) Hydrogen-induced amorphization in intermetallic compound Zr3In. In: Scripta Metallurgica, 22 (7). pp. 991-994.

Aoki, K and Yanagitani, A and Masumoto, T and Chattopadhyay, K (1989) Formation and crystallization of hydrogen-induced amorphous SmFe2H3.6 alloy. In: Journal of the Less Common Metals, 147 (1). pp. 105-111.

Appana Dalavi, P and Prabhu, A and Sajida, M and Chatterjee, K and Venkatesan, J (2022) Casein-Coated Molybdenum Disulfide Nanosheets Augment the Bioactivity of Alginate Microspheres for Orthopedic Applications. In: ACS Omega, 7 (30). pp. 26092-26106.

Apte, Gurunath and Repanas, Alexandros and Willems, Christian and Mujtaba, Anas and Schmelzer, Christian E H and Raichur, Ashok and Syrowatka, Frank and Groth, Thomas (2019) Effect of Different Crosslinking Strategies on Physical Properties and Biocompatibility of Freestanding Multilayer Films Made of Alginate and Chitosan. In: MACROMOLECULAR BIOSCIENCE .

Aradhya, KSS and Surappa, MK (1991) Estimation of mechanical properties of 6061 Al---SiCp composites using finite element method. In: Scripta Metallurgica et Materialia, 25 (4). 817-822 .

Aramanda, SK and Khanna, S and Salapaka, SK and Chattopadhyay, K and Choudhury, A (2020) Crystallographic and Morphological Evidence of Solid�Solid Interfacial Energy Anisotropy in the Sn-Zn Eutectic System. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Arbade, Gajanan Kashinathrao and Kumar, Vikram and Tripathi, Vidisha and Menon, Aishwarya and Bose, Suryasarathi and Patro, T Umasankar (2019) Emblica officinalis-loaded poly(epsilon-caprolactone) electrospun nanofiber scaffold as potential antibacterial and anticancer deployable patch. In: NEW JOURNAL OF CHEMISTRY, 43 (19). pp. 7427-7440.

Arief, I and Biswas, S and Bose, S (2018) Wool-Ball-Type Core-Dual-Shell FeCo@SiO2@MWCNTs Microcubes for Screening Electromagnetic Interference. In: ACS Applied Nano Materials, 1 (5). pp. 2261-2271.

Arief, Injamamul and Bhattacharjee, Yudhajit and Prakash, Om and Sahu, Megha and Suwas, Satyam and Bose, Suryasarathi (2019) Tunable CoNi microstructures in flexible multilayered polymer films can shield electromagnetic radiation. In: COMPOSITES PART B-ENGINEERING, 177 .

Arief, Injamamul and Biswas, Sourav and Bose, Suryasarathi (2017) FeCo-Anchored Reduced Graphene Oxide Framework-Based Soft Composites Containing Carbon Nanotubes as Highly Efficient Microwave Absorbers with Excellent Heat Dissipation Ability. In: ACS Applied Materials & Interfaces, 9 (22). pp. 19202-19214. ISSN 1944-8244

Arief, Injamamul and Biswas, Sourav and Bose, Suryasarathi (2017) Graphene analogues as emerging materials for screening electromagnetic radiations. In: Nano-Structures & Nano-Objects, 11 . pp. 94-101. ISSN 2352507X

Arief, Injamamul and Biswas, Sourav and Bose, Suryasarathi (2016) Tuning the Shape Anisotropy and Electromagnetic Screening Ability of Ultrahigh Magnetic Polymer and Surfactant-Capped FeCo Nanorods and Nanocubes in Soft Conducting Composites. In: ACS APPLIED MATERIALS & INTERFACES, 8 (39). pp. 26285-26297.

Arief, Injamamul and Mukhopadhyay, P K (2017) Magnetorheological Payne effect in bidisperse MR fluids containing Fe nanorods and Fe3O4 nanospheres: A dynamic rheological study. In: JOURNAL OF ALLOYS AND COMPOUNDS, 696 . pp. 1053-1058.

Arief, Injamamul and Mukhopadhyay, P K (2017) Yielding behavior and temperature-induced on-field oscillatory rheological studies in a novel MR suspension containing polymer-capped Fe3Ni alloy microspheres. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 429 . pp. 236-240.

Armstronga, RW and Prasad, YVRK (1974) Polycrystal versus single-crystal strain rate sensitivity of cadmium. In: Philosophical Magazine, 29 (6). pp. 1421-1425.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content. In: Journal of Testing and Evaluation, 16 (3). 298 -304.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions. In: Engineering Fracture Mechanics, 29 (1). 67 -79.

Arora, S and Punith Kumar, MK and Srivastava, C (2020) Graphene�ZnO nanocomposite sensor for lead-ion detection. In: Philosophical Magazine Letters .

Arora, S and Sharma, B and Srivastava, C (2020) ZnCo-carbon nanotube composite coating with enhanced corrosion resistance behavior. In: Surface and Coatings Technology, 398 .

Arora, S and Srivastava, C (2020) Evolution of Phase Constitution, Morphology and Corrosion Behavior of ZnCo Coating Containing Graphene Oxide. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4274-4287.

Arora, S and Srivastava, C (2020) The Interesting Complicacy of the New Age Metallic Coatings with Carbonaceous Additives. In: 237th ECS Meeting with the 18th International Meeting on Chemical Sensors, IMCS 2020, 10-14 May 2020, Montreal; Canada, pp. 473-478.

Arora, S and Srivastava, C (2019) Microstructure and corrosion properties of NiCo-graphene oxide composite coatings. In: Thin Solid Films, 677 . pp. 45-54.

Arora, Sweety and Kumar, M K Punith and Srivastava, Chandan (2019) Electrochemical sensor study of TiO2 nanoparticle-graphene composite produced by mechanical milling and sonication-assisted exfoliation. In: APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 125 (10).

Arora, Sweety and Kumari, Nikita and Srivastava, Chandan (2019) Microstructure and corrosion behaviour of NiCo-Carbon nanotube composite coatings. In: JOURNAL OF ALLOYS AND COMPOUNDS, 801 . pp. 449-459.

Arora, Sweety and Rekha, MY and Gupta, Abhay and Srivastava, Chandan (2018) High Corrosion Resistance Offered by Multi-Walled Carbon Nanotubes Directly Grown Over Mild Steel Substrate. In: JOM, 70 (11). pp. 2590-2595.

Arora, Sweety and Srivastava, Chandan (2017) Synthesis of ZnO Nanocrystal–Graphene Composite by Mechanical Milling and Sonication-Assisted Exfoliation. In: JOM, 69 (6). pp. 1021-1026. ISSN 1047-4838

Arul Selvan, K and Bobji, MS (2012) Extentional characteristics of a liquid filament with dispersed nanoparticles. In: International Conference on Nanoscience and Technology (ICONSAT - 2012), January 20 to 23, 2012, Hyderabad, India.

Arul Varman, K and Mishra, Deepak K and Rajan, Kirtana M and Mallya, Ashwini N and Ramamurthy, Praveen C (2012) Organic device electrode fabricated by aluminum in nanopowder and bulk form and effect on device properties. In: 2012 International Conference on Emerging Electronics (ICEE), 15-17 Dec. 2012, Mumbai.

Aruna, ST and Roy, Shibayan and Sharma, Amit and Savitha, G and Grips, William VK (2014) Cost-effective wear and oxidation resistant electrodeposited Ni-pumice coating. In: SURFACE & COATINGS TECHNOLOGY, 251 . pp. 201-209.

Arunnellaiappan, T and Baskaran, S and Arun, S and Prithivirajan, R (2020) Corrosion behaviour of detonation gun sprayed cermet coatings on AA5083. In: Surface Engineering .

Arya, A (2023) Deformation-induced softening in drawn nickel microwires during torsion. In: Materials Letters, 349 .

Arya, A and Suwas, S and Chokshi, AH (2022) Strengthening in tension and weakening in torsion in drawn nickel microwires. In: Materials Science and Engineering A, 856 .

Arya, KS and Singh, RP and Chakrabarti, T (2024) Novel liquid�phase flash sintering of lead zirconate titanate piezo-ceramics. In: Journal of the American Ceramic Society .

Ashamol, A and Priyambika, VS and Avadhani, GS and Sailaja, RRN (2013) Nanocomposites of crosslinked starch phthalate and silane modified nanoclay: Study of mechanical, thermal, morphological, and biodegradable characteristics. In: Starch - Stärke, 65 (5-6). pp. 443-452.

Ashbaugh, NE and Dattaguru, B and Khobaib, M and Nicholas, T and Prakash, RV and Ramamurthy, TS and Seshadri, BR and Sunder, R (1997) Experimental and analytical estimates of fatigue crack closure in an aluminium-copper alloy 1: Laser interferometry and electron fractography. In: Fatigue & Fracture Of Engineering Materials & Structures, 20 (7). pp. 951-961.

Ashwini, R and Kumar, MKP and Rekha, MY and Santosh, MS and Srivastava, C (2022) High entropy alloy nanoparticle - graphene (HEA:G) composite for non-enzymatic glucose oxidation: optimization for enhanced catalytic performance. In: Carbon Trends, 9 .

Ashwini, R and Kumar, MKP and Rekha, MY and Santosh, MS and Srivastava, C (2022) Optimization of NiFeCrCoCu high entropy alloy nanoparticle � graphene (HEA-G) composite for the enhanced electrochemical sensitivity towards urea oxidation. In: Journal of Alloys and Compounds, 903 .

Ashwini, R and Mohanta, Z and Kumar, MKP and Santosh, MS and Srivastava, C (2021) Enhanced heterogeneous electron transfer kinetics in Graphene Oxide produced from mechanically milled Graphite. In: Carbon Trends, 5 .

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Influence of process variables on microstructure and V-I characteristics of multicomponent zinc oxide-based nonlinear resistors. In: Journal of the American Ceramic Society, 70 (9). pp. 643-650.

Asokan, T (1987) Effects Of Dopants Distribution On The Non-Linear Properties Of A Zno-Based Non-Linear Resistor. In: Transactions and Journal of the British Ceramic Society, 86 (6). pp. 187-189.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Influence of additive oxides on the electrical characteristics of ZnO-based composites. In: Transactions and Journal of the British Ceramic Society, 86 (6). 190 -193.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1988) Inhomogeneity in sintered ZnO based non-linear resistors. In: Ceramics International, 14 (1). 35 -41.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Non-ohmic behaviour of the binary ZnO-Nb2O5 system. In: Journal of Materials Science, 22 (3). pp. 1019-1023.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Studies on microstructure and density of sintered ZnO-based non-linear resistors. In: Journal of Materials Science, 22 (6). pp. 2229-2236.

Asokan, T and Nagabhushana, GR and Iyengar, GNK (1988) Improvement of Non-Linear Characteristics of Multicomponent ZnO-based Ceramics Containing ${Nb}_2O_5$. In: IEEE Transactions on Electrical Insulation, 23 (2). pp. 279-286.

Asuvathraman, R and Rajagopalan, S and Ananthasivan, K and Mathews, CK and Mallya, RM (1995) Surface studies on uranium monocarbide using XPS and SIMS. In: Journal of Nuclear Materials, 224 (1). 25-30 .

Aswathy, B and Avadhani, GS and Sumithra, IS and Suji, S and Sony, G (2011) Microwave assisted synthesis and UV-Vis spectroscopic studies of silver nanoparticles synthesized using vanillin as a reducing agent. In: Journal of Molecular Liquids, 159 (2). pp. 165-169.

Athira, KS and Chokshi, AH (2018) Size Effect in Mechanical Behavior of Nb Microwires. [Book Chapter]

Athira, KS and Ng, KW (2018) Characterization of nanoliposomes and their modification for drug delivery. In: UNSPECIFIED, pp. 351-356.

Athira, KS and Pandey, P and Prabhakar, KVP and Chattopadhyay, K and Chatterjee, S (2022) Laser welding of a W-free precipitation strengthened Co-base superalloy. In: Journal of Materials Science, 57 (13). pp. 7085-7100.

Athreya, C N and Suwas, S and Sarma, V Subramanya (2019) Role of stress state on dynamic recrystallization behaviour of Ni during hot deformation: Analysis of uniaxial compression and plane strain compression. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 763 .

Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, V Subramanya (2017) Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments, theory and phase field model. In: PHILOSOPHICAL MAGAZINE, 97 (34, A). pp. 3211-3228.

Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, V Subramanya (2017) Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments, theory and phase field model. In: PHILOSOPHICAL MAGAZINE, 97 (34, A). pp. 3211-3228.

Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, VSubramanya (2018) Influence of the mode of deformation on recrystallisation behaviour of titanium through experiments, mean field theory and phase field model. In: MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 26 (3).

Athreya, CN and Suwas, S and Sarma, Subramanya V (2015) Influence of mode of deformation on microstructural heterogeneities in Ni subjected to large strain deformation. In: PHILOSOPHICAL MAGAZINE LETTERS, 95 (9). pp. 441-449.

Atul H, Chokshi (2011) To Bt or not? In: pp. 624-626.

Avadhani, GS (2003) Optimization of Process Parameters for the Manufacturing of Rocket Casings: A Study Using Processing Maps. In: Journal of Materials Engineering and Performance, 12 (6). pp. 609-622.

Avinash, MB and Raut, Devaraj and Mishra, Manish Kumar and Ramamurty, Upadrasta and Govindaraju, T (2015) Bioinspired Reductionistic Peptide Engineering for Exceptional Mechanical Properties. In: SCIENTIFIC REPORTS, 5 .

Awasthi, S (2021) A Review on Hydrogels and Ferrogels for Biomedical Applications. In: JOM, 73 (8). pp. 2440-2451.

Awasthi, S (2021) A Review on Hydrogels and Ferrogels for Biomedical Applications. In: JOM, 73 (8). pp. 2440-2451.

Awasthi, S and Gaur, JK and Bobji, MS and Srivastava, C (2022) Nanoparticle-reinforced polyacrylamide hydrogel composites for clinical applications: a review. In: Journal of Materials Science, 57 (17). pp. 8041-8063.

Awasthi, S and Pandey, SK and Arunan, E and Srivastava, C (2021) A review on hydroxyapatite coatings for the biomedical applications: Experimental and theoretical perspectives. In: Journal of Materials Chemistry B, 9 (2). pp. 228-249.

Awasthi, S and Pandey, SK and Gaur, JK and Srivastava, C (2022) Load-bearing study and interfacial interactions of hydroxyapatite composite coatings for bone tissue engineering. In: Materials Chemistry Frontiers, 6 (24). 3731 -3747.

Ayappa, KG and Kamala, CR and Abinandanan, TA (1999) Mean field lattice model for adsorption isotherms in zeolite NaA. In: Journal of Chemical Physics, The, 110 (17). pp. 8714-8721.

Ayiriveetil, Arunbabu and Sabapathy, Tamilarasan and Varma, Sreevidya G and Ramamurty, Upadrasta and Asokan, Sundarrajan (2016) Structural and mechanical characterization on ultrafast laser written chalcogenide glass waveguides. In: OPTICAL MATERIALS EXPRESS, 6 (8). pp. 2530-2536.

Ayiriveetil, Arunbabu and Varma, G Sreevidya and Chaturvedi, Abhishek and Sabapathy, Tamilarasan and Ramamurty, Upadrasta and Asokan, Sundarrajan (2017) Structural, mechanical and optical studies on ultrafast laser inscribed chalcogenide glass waveguide. In: OPTICAL MATERIALS, 66 . pp. 386-391.

Azad, AM and Jacob, KT and Sreedharan, OM (1991) Gibbs’ energy of formation of YBa2Cu3O7-x (tetragonal). In: Bulletin of Materials Science, 14 (4). pp. 983-987.

Azeem, MA and Kumar, AK and Mondal, S (2005) Creep behaviour of short fibre reinforced QE22 magnesium alloy using impression creep test. In: 4th Conference on Creep, Fatique and Creep-Fatique Internation, OCT 08-10, 2003, Kalpakkam, INDIA.

Azeem, MA and Shortall, C and Ramamurty, U (2007) Tensile properties of stainless steel sandwich sheets with fibrous cores. In: Scripta Materialia, 57 (3). pp. 221-224.

Azeem, MA and Tewari, A and Mishra, S and Gollapudi, S and Ramamurty, U (2010) Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy. In: Acta Materialia, 58 (5). pp. 1495-1502.

Azeem, MA and Tewari, A and Ramamurty, U (2010) Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy. In: Materials Science and Engineering A, 527 (4-5). pp. 898-903.

Azhakanantham, D and Raghu, G and Selvamani, M and Ramamurthy, PC and Seikh, AH and Kesavan, AV (2024) Role of proton conducting polyelectrolyte on the organic photovoltaics efficiency. In: Journal of Materials Science: Materials in Electronics, 35 (11).

Azhakanantham, D and Viswanathan, VN and Selvamani, M and Kesavan, AV and Alotaibi, MA and Ramamurthy, PC (2024) Absorption-induced external quantum efficiency modulation in organic nanocrystals incorporated organic solar cells. In: Journal of Materials Science: Materials in Electronics, 35 (27).

B

Babu, Ramesh (1986) Studies on drop formation at conical tips - a theoretical approach. In: Proceedings of International Conference on `Progress in metallurgical research: fundamental and applied aspects, IIT-Kanpur, p. 279-87, pp. 4918-4927.

Babu, Ramesh S (1986) Experimental Studies on Drop Formation at the Tip of Melting Rods. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17 (3). pp. 471-477.

Babu, Ramesh S (1986) An absolute method for the determination of surface tension of liquids using pendent drop profiles. In: Bulletin of Materials Science, 90 (18). 4337 -4340.

Babu, AR and Gundiah, N (2014) Role of Crosslinking and Entanglements in the Mechanics of Silicone Networks. In: EXPERIMENTAL MECHANICS, 54 (7). pp. 1177-1187.

Babu, Arvindha D and Majumdar, Bhaskar and Sarkar, Rajdeep and Murty, BS and Chattopadhyay, K (2016) On the Structural Stability of Melt Spun Ribbons of Fe95-x Zr (x) B4Cu1 (x=7 and 9) Alloys and Correlation with Their Magnetic Properties. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (1). pp. 560-571.

Babu, PJ and Doble, M and Raichur, AM (2018) Silver oxide nanoparticles embedded silk fibroin spuns: Microwave mediated preparation, characterization and their synergistic wound healing and anti-bacterial activity. In: Journal of Colloid and Interface Science, 513 . pp. 62-71.

Babu, PJ and Saranya, S and Raichur, AM and Doble, M (2020) Design of photoluminescence point-of-care membrane strip for the detection of dopamine. In: Materials Letters, 277 .

Babu, PN and Gargeya, BSK and Ray, BC and Pal, S (2020) Atomistic investigation of mechanical behavior for CNT reinforced nanocrystalline aluminum under biaxial tensile loading. In: Materials Today: Proceedings, 15 - 17 December 2020, Indore, pp. 4942-4950.

Babu, Prasath R and Karthikeyan, S (2013) Effect of stress orientation on microstructural evolution during creep of near-lamellar Ti-47Al-2Cr-2Nb. In: Materials Science and Engineering: A, 564 . pp. 218-231.

Babu, Prasath R and Vamsi, RV and Karthikeyan, S (2018) On the formation and stability of precipitate phases in a near lamellar gamma-TiAl based alloy during creep. In: INTERMETALLICS, 98 . pp. 115-125.

Babu, Punuri Jayasekhar and Raichur, Ashok M and Doble, Mukesh (2018) Synthesis and characterization of biocompatible carbon-gold (C-Au) nanocomposites and their biomedical applications as an optical sensor for creatinine detection and cellular imaging. In: SENSORS AND ACTUATORS B-CHEMICAL, 258 . pp. 1267-1278.

Babu, Punuri Jayasekhar and Raichur, Ashok M. and Doble, Mukesh (2018) Synthesis and characterization of biocompatible carbon-gold (C-Au) nanocomposites and their biomedical applications as an optical sensor for creatinine detection and cellular imaging (vol 258, pg 1267, 2018). In: SENSORS AND ACTUATORS B-CHEMICAL, 264 . p. 468.

Babu, Ramesh S (1987) Alternative methods for the determination of surface tension using drop-weight data. In: Journal of Colloid and Interface Science, 115 (2). pp. 551-554.

Babu, Ramesh S (1987) Analysis of drop formation at conical tips : 1. Theory. In: Journal of Colloid and Interface Science, 116 (2). pp. 350-356.

Babu, V and Padaikathan, P (2002) Structure and hard magnetic properties of barium hexaferrite with and without $La_2O_3$ prepared by ball milling. In: Journal of Magnetism and Magnetic Materials, 241 (1). pp. 85-88.

Baby, TT and Marques, GC and Neuper, F and Singaraju, SA and Garlapati, S and von Seggern, F and Kruk, R and Dasgupta, S and Sykora, B and Breitung, B and Sukkurji, PA and Bog, U and Kumar, R and Fuchs, H and Reinheimer, T and Mikolajek, M and Binder, JR and Hirtz, M and Ungerer, M and Koker, L and Gengenbach, U and Mishra, N and Gruber, P and Tahoori, M and Hagmann, JA and von Seggern, H and Hahn, H (2020) Printing Technologies for Integration of Electronic Devices and Sensors. In: NATO Science for Peace and Security Series C: Environmental Security . pp. 1-34.

Baby, Tessy Theres and Rommel, Manuel and von Seggern, Falk and Friederich, Pascal and Reitz, Christian and Dehm, Simone and Kuebel, Christian and Wenzel, Wolfgang and Hahn, Horst and Dasgupta, Subho (2017) Sub-50 nm Channel Vertical Field-Effect Transistors using Conventional Ink-Jet Printing. In: ADVANCED MATERIALS, 29 (4).

Badapanda, T and Chaterjee, S and Mishrac, Anupam and Ranjan, Rajeev and Anward, S (2017) Electric field induced strain, switching and energy storage behaviour of lead free Barium Zirconium Titanate ceramic. In: PHYSICA B-CONDENSED MATTER, 521 . pp. 264-269.

Badapanda, T and Harichandan, R and Kumar, Bheesma T and Parida, S and Rajput, SS and Mohapatra, P and Anwar, S and Ranjan, R (2016) Improvement in dielectric and ferroelectric property of dysprosium doped barium bismuth titanate ceramic. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 27 (7). pp. 7211-7221.

Badapanda, T and Sarangi, S and Behera, B and Anwar, S and Sinha, TP and Ranjan, R and Luz, GE and Longo, E and Cavalcante, LS (2014) Structural refinement, optical and electrical properties of Ba1-x Sm-2x/3](Zr0.05Ti0.95)O-3 ceramics. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 25 (8). pp. 3427-3439.

Badapanda, T and Sarangi, S and Behera, B and Parida, S and Saha, S and Sinha, TP and Ranjan, Rajeev and Sahoo, PK (2015) Optical and dielectric study of strontium modified barium zirconium titanate ceramic prepared by high energy ball milling. In: JOURNAL OF ALLOYS AND COMPOUNDS, 645 . pp. 586-596.

Bag, A and Ray, KK and Dwarakadasa, ES (1999) Influence of Martensite Content and Morphology on Tensile and Impact Properties of High-Martensite Dual-Phase Steels. In: Metallurgical And Materials Transactions A, 30 (5). pp. 1193-1202.

Bag, Asim and Dwarakadasa, ES and Ray, KK (2001) Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels. In: Metallurgical and Materials Transactions A, 32 (9). pp. 2207-2217.

Bagchi, Amrit and Meka, Sai Rama Krishna and Rao, Badari Narayana and Chatterjee, Kaushik (2014) Perovskite ceramic nanoparticles in polymer composites for augmenting bone tissue regeneration. In: NANOTECHNOLOGY, 25 (48).

Baheti, Varun A and Islam, Sarfaraj and Kumar, Praveen and Ravi, Raju and Narayanan, Ramesh and Hongqun, Dong and Vuorinen, Vesa and Laurila, Tomi and Paul, Aloke (2016) Effect of Ni content on the diffusion-controlled growth of the product phases in the Cu(Ni)-Sn system. In: PHILOSOPHICAL MAGAZINE, 96 (1). pp. 15-30.

Baheti, Varun A and Kashyap, Sanjay and Kumar, Praveen and Chattopadhyay, Kamanio and Paul, Aloke (2017) Bifurcation of the Kirkendall marker plane and the role of Ni and other impurities on the growth of Kirkendall voids in the Cu–Sn system. In: Acta Materialia, 131 . pp. 260-270. ISSN 13596454

Baheti, Varun A and Kashyap, Sanjay and Kumar, Praveen and Chattopadhyay, Kamanio and Paul, Aloke (2017) Effect of Ni on growth kinetics, microstructural evolution and crystal structure in the Cu(Ni)–Sn system. In: Philosophical Magazine, 97 (21). pp. 1782-1802. ISSN 1478-6435

Baheti, Varun A and Kashyap, Sanjay and Kumar, Praveen and Chattopadhyay, Kamanio and Paul, Aloke (2017) Solid-state diffusion-controlled growth of the intermediate phases from room temperature to an elevated temperature in the Cu-Sn and the Ni-Sn systems. In: JOURNAL OF ALLOYS AND COMPOUNDS, 727 . pp. 832-840.

Baheti, Varun A and Kashyap, Sanjay and Kumar, Praveen and Chattopadhyay, Kamanio and Paul, Aloke (2018) Solid-state diffusion-controlled growth of the phases in the Au-Sn system. In: PHILOSOPHICAL MAGAZINE, 98 (1, A). pp. 20-36.

Baheti, Varun A and Kumar, Praveen and Paul, Aloke (2017) Effect of Au, Pd and Pt addition in Cu on the growth of intermetallic compounds and the Kirkendall voids in the Cu-Sn system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 28 (22). pp. 17014-17019.

Baheti, Varun A and Kumar, Praveen and Paul, Aloke (2017) Effect of Au, Pd and Pt addition in Cu on the growth of intermetallic compounds and the Kirkendall voids in the Cu-Sn system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 28 (22). pp. 17014-17019.

Baheti, Varun A and Kumar, Praveen and Paul, Aloke (2017) Growth of phases in the solid-state from room temperature to an elevated temperature in the Pd-Sn and the Pt-Sn systems. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 28 (24). pp. 18379-18386.

Baheti, Varun A and Paul, Aloke (2018) Development of different methods and their efficiencies for the estimation of diffusion coefficients following the diffusion couple technique. In: ACTA MATERIALIA, 156 . pp. 420-431.

Baheti, Varun A and Raju, Ravi (2019) Interdiffusion study of the topologically closed packed phase and the phase boundary compositions in the Fe-Mo system. In: INTERMETALLICS, 113 .

Baheti, Varun A and Ravi, Raju and Paul, Aloke (2013) Interdiffusion study in the Pd-Pt system. In: Journal of Materials Science: Materials in Electronics, 24 (8). pp. 2833-2838.

Baheti, Varun A and Roy, Soumitra and Ravi, Raju and Paul, Aloke (2013) Interdiffusion and the phase boundary compositions in the Co-To system. In: INTERMETALLICS, 33 . pp. 87-91.

Baheti, Varun A and Santra, Sangeeta and Roy, Soumitra and Perumalsamy, Kiruthika and Prasad, Soma and Ravi, Raju and Paul, Aloke (2015) Phase evolutions, growth kinetics and diffusion parameters in the Co-Ni-Ta system. In: JOURNAL OF ALLOYS AND COMPOUNDS, 622 . pp. 1033-1040.

Bahl, S and Dryepondt, S and Allard, LF and Suwas, S and Shyam, A (2018) Retardation of Small Creep-Fatigue Crack in Gr. 91 Steel Through the Combined Effects of Stress Relaxation, Microstructural Evolution, and Oxidation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6110-6121.

Bahl, S and Krishnamurthy, AS and Suwas, S and Chatterjee, K (2017) Controlled nanoscale precipitation to enhance the mechanical and biological performances of a metastable β Ti-Nb-Sn alloy for orthopedic applications. In: Materials and Design, 126 . pp. 226-237.

Bahl, S and Raj, S and Vanamali, S and Suwas, S and Chatterjee, K (2014) Effect of boron addition and processing of Ti-6Al-4V on corrosion behaviour and biocompatibility. In: MATERIALS TECHNOLOGY, 29 (B1, SI). B64-B68.

Bahl, S and Suwas, S and Chatterjee, K (2021) Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials. In: International Materials Reviews, 66 (2). pp. 114-139.

Bahl, Sumit and Aleti, Bhavya Tulasi and Suwas, Satyam and Chatterjee, Kaushik (2018) Establishing the microstructure-strengthening correlation in severely deformed surface of titanium. In: PHILOSOPHICAL MAGAZINE, 98 (23). pp. 2095-2119.

Bahl, Sumit and Aleti, Bhavya Tulasi and Suwas, Satyam and Chatterjee, Kaushik (2018) Surface nanostructuring of titanium imparts multifunctional properties for orthopedic and cardiovascular applications. In: MATERIALS & DESIGN, 144 . pp. 169-181.

Bahl, Sumit and Das, Suvam and Suwas, Satyam and Chatterjee, Kaushik (2018) Engineering the next-generation tin containing beta titanium alloys with high strength and low modulus for orthopedic applications. In: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 78 . pp. 124-133.

Bahl, Sumit and Krishnamurthy, Akash S and Suwas, Satyam and Chatterjee, Kaushik (2017) Controlled nanoscale precipitation to enhance the mechanical and biological performances of a metastable beta Ti-Nb-Sn alloy for orthopedic applications. In: MATERIALS & DESIGN, 130 (126). pp. 226-237.

Bahl, Sumit and Meka, Sai Rama Krishna and Suwas, Satyam and Chatterjee, Kaushik (2018) Surface Severe Plastic Deformation of an Orthopedic Ti-Nb-Sn Alloy Induces Unusual Precipitate Remodeling and Supports Stem Cell Osteogenesis through Akt Signaling. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 4 (9). pp. 3132-3142.

Bahl, Sumit and Mishra, Sumeet and Yazar, K U and Kola, Immanuel Raju and Chatterjee, Kaushik and Suwas, Satyam (2019) Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel. In: ADDITIVE MANUFACTURING, 28 . pp. 65-77.

Bahl, Sumit and Mishra, Sumeet and Yazar, KU and Kola, Immanuel Raju and Chatterjee, Kaushik and Suwas, Satyam (2019) Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel. In: ADDITIVE MANUFACTURING, 28 . pp. 65-77.

Bahl, Sumit and Nithilaksh, P L and Suwas, Satyam and Kailas, Satish V and Chatterjee, Kaushik (2017) Processing-Microstructure-Crystallographic Texture-Surface Property Relationships in Friction Stir Processing of Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 26 (9). pp. 4206-4216.

Bahl, Sumit and Shreyas, P and Trishul, MA and Suwas, Satyam and Chatterjee, Kaushik (2015) Enhancing the mechanical and biological performance of a metallic biomaterial for orthopedic applications through changes in the surface oxide layer by nanocrystalline surface modification. In: NANOSCALE, 7 (17). pp. 7704-7716.

Bahl, Sumit and Suwas, Satyam and Chatterjee, Kaushik (2014) The control of crystallographic texture in the use of magnesium as a resorbable biomaterial. In: RSC ADVANCES, 4 (99). pp. 55677-55684.

Bahl, Sumit and Suwas, Satyam and Chatterjee, Kaushik (2014) The importance of crystallographic texture in the use of titanium as an orthopedic biomaterial. In: RSC ADVANCES, 4 (72). pp. 38078-38087.

Bahl, Sumit and Suwas, Satyam and Ungar, Tamas and Chatterjee, Kaushik (2017) Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel. In: ACTA MATERIALIA, 122 . pp. 138-151.

Bai, Pramila BN and Biswas, SK (1987) Characterization of dry sliding wear of Al---Si alloys. In: Wear, 120 (1). pp. 61-74.

Bai, W and Bisht, A and Roy, A and Suwas, S and Sun, R and Silberschmidt, VV (2018) Effect of hybrid machining on structural integrity of aerospace-grade materials. In: 8th CIRP Conference on High Performance Cutting, HPC 2018, 25 - 27 June 2018, Budapest, pp. 163-166.

Bai, Wei and Bisht, Anuj and Roy, Anish and Suwas, Satyam and Sun, Ronglei and Silberschmidt, Vadim V (2019) Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101 (5-8). pp. 1143-1156.

Baia, Pramila BN and Ramasesh, BS and Surappa, MK (1992) Dry sliding wear of A356-Al-SiCp composites. In: Wear, 157 (2). pp. 295-304.

Bajad, Ganesh and Guguloth, Venkanna and Vijayakumar, RP and Bose, Suryasarathi (2016) Conversion of plastic waste into CNTs using Ni/Mo/MgO catalystAn optimization approach by mixture experiment. In: FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, 24 (2). pp. 162-169.

Bajad, Ganesh and Jain, Rajat and Harhare, Warun and Vijayakumar, R P and Bose, Suryasarathi (2017) Synthesis of fuel oil and carbon nanotubes in an autoclave using plastic waste as precursor. In: MATERIALS AND MANUFACTURING PROCESSES, 32 (5). pp. 495-500.

Bajargan, Govind and Singh, Gaurav and Ramamurty, U (2017) Effect of Li Addition on the Optimum Thermo-Mechanical Processing Parameters of the Mg Alloy AZ31. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4262-4274.

Bajargan, Govind and Singh , Gaurav and Sivakumar, D and Ramamurty, U (2013) Effect of temperature and strain rate on the deformation behavior and microstructure of a homogenized AZ31 magnesium alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 579 . pp. 26-34.

Baker, Bryan A and Pine, Scott P and Chatterjee, Kaushik and Kumar, Girish and Lin, Nancy J and McDaniel, Jennifer H and Salit, Marc L and Simon, Carl G (2014) Ontology analysis of global gene expression differences of human bone marrow stromal cells cultured on 3D scaffolds or 2D films. In: BIOMATERIALS, 35 (25). pp. 6716-6726.

Bakshi, S and Chattopadhyay, K and Kumar, S (2006) Novel technique of processing functionally graded material in age-hardenable Al-alloys. In: Transactions of the Indian Institute of Metals, 59 (1). pp. 73-84.

Bakshi, S and Kumar, S (2006) Impact and fatigue crack growth behavior of a yield strength graded Al-Zn-Mg alloy. In: Materials Science Forum, 519-521 (part 1). pp. 1539-1544.

Balachander, GM and Kotcherlakota, R and Nayak, B and Kedaria, D and Rangarajan, A and Chatterjee, K (2021) 3D Tumor Models for Breast Cancer: Whither We Are and What We Need. In: ACS Biomaterials Science and Engineering .

Balachander, Gowri Manohari and Balaji, Sai A and Rangarajan, Annapoorni and Chatterjee, Kaushik (2015) Enhanced Metastatic Potential in a 3D Tissue Scaffold toward a Comprehensive in Vitro Model for Breast Cancer Metastasis. In: ACS APPLIED MATERIALS & INTERFACES, 7 (50). pp. 27810-27822.

Balachander, Gowri Manohari and Talukdar, Pinku Mani and Debnath, Monojit and Rangarajan, Annapoorni and Chatterjee, Kaushik (2018) Inflammatory Role of Cancer-Associated Fibroblasts in Invasive Breast Tumors Revealed Using a Fibrous Polymer Scaffold. In: ACS APPLIED MATERIALS & INTERFACES, 10 (40). pp. 33814-33826.

Balachandran, S and Mishra, RS and Banerjee, D (2020) Friction stir processing of a metastable β titanium alloy in β and α+β phase fields. In: Materials Science and Engineering A, 772 .

Balachandran, Shanoob and Kashiwar, Ankush and Choudhury, Abhik and Banerjee, Dipankar and Shi, Rongpei and Wang, Yunzhi (2016) On variant distribution and coarsening behavior of the a phase in a metastable beta titanium alloy. In: ACTA MATERIALIA, 106 . pp. 374-387.

Balachandran, Shanoob and Kumar, Sharath and Banerjee, Dipankar (2017) On recrystallization of the α and β phases in titanium alloys. In: Acta Materialia, 131 . pp. 423-434. ISSN 13596454

Balam, SSK and Dong, HQ and Laurila, T and Vuorinen, V and Paul, A (2011) Diffusion and Growth of the mu Phase (Ni6Nb7) in the Ni-Nb System. In: Metallurgical and Materials Transactions A, 42A (7). pp. 1727-1731.

Balam, SSK and Paul, A (2011) Study of interdiffusion and growth of topologically closed packed phases in the Co-Nb system. In: Journal of Materials Science (full set), 46 (4). pp. 889-895.

Balam, SSK and Ravi, R and Paul, Aloke (2012) Diffusion mechanism in the mu phase in Nb-X (X = Ni, Co, Fe) systems. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011 , ICB Lab, Dijon, FRANCE, pp. 497-501.

Balam, Somasurendra Kumar and Paul, Aloke (2010) Interdiffusion Study in the Fe-Nb System. In: Metallurgical and Materials Transactions A, 41A (9). pp. 2175-2179.

Balasubrahmanyam, VV and Prasad, YVRK (2002) Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging. In: Materials Science and Engineering A, 336 (1-2). pp. 150-158.

Balasubrahmanyam, VV and Prasad, YVRK (2001) Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al. In: Materials Science and Technology, 17 (10). pp. 1222-1228.

Balasubramaniam, R and Basu, Bikramjit and Ranganathan, S and Suryanarayana, C and Upadhyaya, Anish (2009) Preface and foreword special issue: Prof T R Anantharaman. In: Journal of Materials Science, 44 (9). pp. 2177-2180.

Baler, N and Godha, A and Makineni, SK (2023) On the discontinuous precipitation during recrystallization in a multicomponent alloy. In: Scripta Materialia, 224 .

Baler, N and Pandey, P and Palanisamy, D and Makineni, SK and Phanikumar, G and Chattopadhyay, K (2020) On the effect of W addition on microstructural evolution and γ′ precipitate coarsening in a Co–30Ni–10Al–5Mo–2Ta–2Ti alloy. In: Materialia, 10 .

Baler, N and Pandey, P and Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Effects of Ti and Cr Additions in a Co�Ni�Al�Mo�Nb-Based Superalloy. In: Minerals, Metals and Materials Series, 12-16 September 2021, Seven Springs; United States, pp. 929-936.

Baler, Nithin and MV, Abdulla Samin and Godha, Akshat and Makineni, Surendra Kumar (2022) Microstructural engineering of medium entropy NiCo(CrAl) alloy for enhanced room and high-temperature mechanical properties. In: Materialia, 22 (101424). ISSN 25891529

Bali, Ashoka and Chetty, Raju and Sharma, Amit and Rogl, Gerda and Heinrich, Patrick and Suwas, Satyam and Misra, Dinesh Kumar and Rogl, Peter and Bauer, Ernst and Mallik, Ramesh Chandra (2016) Thermoelectric properties of In and I doped PbTe. In: JOURNAL OF APPLIED PHYSICS, 120 (17).

Balpande, AR and Agrawal, S and Li, X and Suwas, S and Guo, S and Ghosal, P and Nene, SS (2024) Excellent specific strength-ductility synergy in novel complex concentrated alloy after suction casting. In: Materials and Design, 242 .

Bandyopadhyay, A and Ramamurthy, U and Dwarakadasa, ES (1993) Strain localization behaviour of Al-Cu and Al-Li-Cu-Mg-Zr alloys due to cathodic charging. In: Journal of Materials Science Letters, 12 (8). pp. 555-557.

Banerjee, A and Chatterjee, K and Madras, G (2014) Enzymatic degradation of polymers: a brief review. In: MATERIALS SCIENCE AND TECHNOLOGY, 30 (5). pp. 567-573.

Banerjee, Aditi and Chatterjee, Kaushik and Madras, Giridhar (2015) Effect of solvents on the enzyme mediated degradation of copolymers. In: MATERIALS RESEARCH EXPRESS, 2 (9).

Banerjee, Aditi and Chatterjee, Kaushik and Madras, Giridhar (2015) Effect of solvents on the enzyme mediated degradation of copolymers. In: MATERIALS RESEARCH EXPRESS, 2 (9).

Banerjee, Aditi and Chatterjee, Kaushik and Madras, Giridhar (2016) Enzymatic degradation of polycaprolactone-gelatin blend. In: MATERIALS RESEARCH EXPRESS, 2 (4).

Banerjee, Aditi and Chatterjee, Kaushik and Madras, Giridhar (2015) Enzymatic degradation of polycaprolactone-gelatin blend. In: MATERIALS RESEARCH EXPRESS, 2 (4).

Banerjee, Aditi and Chatterjee, Kaushik and Madras, Giridhar (2014) Lipase mediated enzymatic degradation of polydioxanone in solution. In: POLYMER DEGRADATION AND STABILITY, 110 . pp. 284-289.

Banerjee, D (2022) Towards a Sustainable Future with Materials. In: Journal of the Indian Institute of Science, 102 (1). pp. 5-9.

Banerjee, D and Krishnan, RV and Vasu, KI (1978) Transformation microstructures in a Ti-31A1-13Mo alloy. In: Scripta Metallurgica, 12 (1). pp. 27-30.

Banerjee, D and Krishnan, RV and Vasu, KI (1980) A reconsideration of phase relations in the Ti-Al-Mo and Ti-Al systems. In: Metallurgical and Materials Transactions A, 11 (7). pp. 1095-1105.

Banerjee, DK and Krishnan, RV and Vasu, KI (1978) Microstructure and Phase-Relations In the Ti-mo-al System. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 299.

Banerjee, Dipankar (2017) Comments on `Composite structure of a phase in metastable beta Ti alloys induced by lattice strain during beta to alpha phase transformation'. In: SCRIPTA MATERIALIA, 141 . pp. 146-147.

Banerjee, Dipankar (2011) On substructure in titanium alloy martensites: comment on `Antiphase boundary-like stacking fault in alpha `'-martensite of disordered crystal structure in beta-titanium shape memory alloy'. In: Philosophical Magazine, 91 (16). p. 2078.

Banerjee, Dipankar (2011) On substructure in titanium alloy martensites: comment on ‘Antiphase boundary-like stacking fault in α″-martensite of disordered crystal structure in β-titanium shape memory alloy’. In: Philosophical Magazine, 91 (16). p. 2078.

Banerjee, Dipankar and Williams, JC (2013) Perspectives on Titanium Science and Technology. In: ACTA MATERIALIA, 61 (3). pp. 844-879.

Banerjee, Gayathri N and Banerjee, S and Goswami, R (2004) Observation of pseudo-gap and Kondo behaviour in $Al_{70}Pd_{30-x}Mn_x$ quasicrystals. In: Journal of Non-Crystalline Solids, 334-33 . pp. 388-392.

Banerjee, Gayathri N and Banerjee, S and Goswami, R (2004) Observation of pseudo-gap and Kondo behaviour in Al70Pd30−xMnx quasicrystals. In: 8th International Conference on Quasicrystals, SEP 08-13, 2002, Bangalore, INDIA.

Banerjee, P and Kumar, S and Bose, S (2021) Thermoreversible Bonds and Graphene Oxide Additives Enhance the Flexural and Interlaminar Shear Strength of Self-Healing Epoxy/Carbon Fiber Laminates. In: ACS Applied Nano Materials, 4 (7). pp. 6821-6831.

Banerjee, P and Parasuram, S and Kumar, S and Bose, S (2023) Enhanced Mechanical and Self-Healing Properties of Carbon Fiber-Reinforced Epoxy Laminates Using In Situ-Grown ZnO Nanorods and Thermo-Reversible Bonds. In: ACS Omega, 8 (44). pp. 41282-41294.

Banerjee, P and Parasuram, S and Kumar, S and Bose, S (2022) Graphene oxide-mediated thermo-reversible bonds and in situ grown nano-rods trigger ‘self-healable’ interfaces in carbon fiber laminates. In: Nanoscale, 14 (25). pp. 9004-9020.

Banerjee, Poulami and Bhattacharjee, Yudhajit and Bose, Suryasarathi (2019) Lightweight Epoxy-Based Composites for EMI Shielding Applications. In: JOURNAL OF ELECTRONIC MATERIALS . pp. 1-19.

Banerjee, S and Dey, GK and Srivastava, D and Ranganathan, S (1997) Plate-shaped transformation products in zirconium-base alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2201-2216.

Banerjee, S and Goswami, R and Chattopadhyay, K and Raychaudhuri, AK (1995) Structural and electrical transport properties of Al-Cu-Cr quasicrystals. In: Physical Review B: Condensed Matter, 52 (5). 3220-3233 .

Banerjee, S and Raychaudhuri, AK and Goswami, R and Chattopadhyay, K (1997) The low-temperature resistivity and magnetoresistance of icosahedral quasicrystalline Al–Cu–Cr. In: Journal of Physics: Condensed Matter, 9 (31). pp. 6643-6650.

Banerjee, S and Singh, AP and Lala, SRF and Srivastava, C (2024) Engineering Grain Boundary Constitution in Pulse Electrodeposited Nickel Coatings for Enhanced Resistance to Electrochemical Degradation. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 55 (8). pp. 2977-2989.

Banerjee, Sauradipta (2017) Formation of Pentosidine Cross-Linking in Myoglobin by Glyoxal: Detection of Fluorescent Advanced Glycation End Product. In: JOURNAL OF FLUORESCENCE, 27 (4). pp. 1213-1219.

Bankarusamy, V and Kishore, * (1983) Wear of gray cast iron. In: Wear, 86 (1). 173 -175.

Bankoti, AKS and Mondal, AK and Dieringa, Hajo and Ray, BC and Kumar, S (2016) Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 673 . pp. 332-345.

Bankoti, AKS and Mondal, AK and Kumar, Subodh and Ray, BC (2015) Individual and combined additions of calcium and antimony on microstructure and mechanical properties of squeeze-cast AZ91D magnesium alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626 . pp. 186-194.

Bankoti, AKS and Mondal, AK and Perugu, Chandra S and Ray, BC and Kumar, S (2017) Correlation of Microstructure and Electrochemical Corrosion Behavior of Squeeze-Cast Ca and Sb Added AZ91 Mg Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 5106-5121.

Bansal, M and Santhiya, D and Subramanian, S (2023) Role of Surface-Chemistry in Colloidal Processing of Ceramics: A Review. In: Transactions of the Indian Institute of Metals .

Bansal, U and Chattopadhyay, K (2022) Newer Developments in Aluminium Alloys Through Ordered Precipitates and Segregation of Transition Elements. In: Transactions of the Indian Institute of Metals, 75 (4). pp. 1015-1030.

Bansal, U and Esakkiraja, N and Baskaran, T and Paul, T and Ravi, R and Kumar, P and Jayaram, V and Paul, A (2024) Synergistic effects of Pt and Y addition in (Ni, Pt)CrAlY bond coat on oxide spallation resistance and growth of interdiffusion zone between bond coat and Ni-based single crystal superalloy. In: Corrosion Science, 240 .

Bansal, U and Srivastava, A and Esakkiraja, N and Tamilselvi, M and Paul, A (2023) Effect of Pt on diffusion-controlled growth characteristics of interdiffusion zone between CM247LC superalloy and Ni(Pt)Al bond coat. In: Journal of Materials Science, 58 (3). pp. 1305-1314.

Bansal, U and Thakur, AK and Baheti, VA and Singh, SB and Mondal, A and Halder, AK and Chakraborty, A and Chattopadhyay, K and Paul, A (2023) Diffusion-controlled growth mechanism of phases and the microstructural evolution in the Ni-Zn system. In: Materials Characterization, 202 .

Bapari, S and Ghosh, P and Lienert, U and Chokshi, AH (2020) A multi-scale deformation analysis for a particulate composite at the rigidity threshold. In: Composites Science and Technology, 191 .

Bapari, Sambit and Chokshi, Atul H (2019) The role of the soft phase in rigidity enhancements in a particulate composite. In: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 123 . pp. 114-122.

Barai, K and Tiwary, CS and Chattopadhyay, PP and Chattopadhyay, K (2012) Synthesis of free standing nanocrystalline Cu by ball milling at cryogenic temperature. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 52-58.

Barbiéro, Laurent and Neto, José Queiroz Pde and Ciornei, Gilles and Sakamoto, Arnaldo Y and Capellari, Benjamin and Fernandes, Erminio and Valles, Vincent (2002) Geochemistry of water and ground water in the Nhecolandia, Pantanal of Mato Grosso, Brazil: Variability and associated processes. In: Wetlands, 22 (3). 528-540 .

Barik, RK and Mishra, S and Khazaei, M and Wang, S and Liang, Y and Sun, Y and Ranjbar, A and Tan, TL and Wang, J and Yunoki, S and Ohno, K and Kawazoe, Y and Singh, AK (2024) Valley-Polarized Topological Phases with In-Plane Magnetization. In: Nano Letters .

Barma, SV and Jathar, SB and Huang, Y-T and Jadhav, YA and Rahane, GK and Rokade, AV and Nasane, MP and Rahane, SN and Cross, RW and Suryawanshi, MP and Jo, SB and Hoye, RLZ and Jadkar, SR and Dzade, NY and Rondiya, SR (2023) Synthesis and Interface Engineering in Heterojunctions of Tin-Selenide-Based Nanostructures for Photoelectrochemical Water Splitting. In: ACS Applied Nano Materials .

Barman, Binay Kumar Deb and Singh, Shobhit Pratap and Kumar, Praveen (2016) Processing and mechanical behavior of Cu-Bi alloys with high volume fraction of Bi: Suitability for high temperature soldering application. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 666 . pp. 339-349.

Barua, R and Datta, S (2023) Artificial intelligence in modern medical science: A promising practice. [Book Chapter]

Barua, R and Datta, S (2024) Beyond boundaries: Navigating future horizons with augmented and virtual reality in healthcare and biomedical engg. [Book Chapter]

Barua, R and Datta, S (2023) Emerging surgical robotic applications for modern Minimally Invasive Surgery (MIS). [Book Chapter]

Barua, R and Datta, S (2024) The emerging next-generation materials for biomedical applications. [Book Chapter]

Barua, R and Datta, S (2024) The future of ChatGPT: Exploring features, capabilities, and challenges as a leading support tool. [Book Chapter]

Barua, R and Datta, S and Sarkar, A (2023) Artificial intelligence and robotics-based minimally invasive surgery: Innovations and future perceptions. [Book Chapter]

Baruah, D and Vaishakh, KV and Sreedhar, SA and Gupta, SK and Suwas, S and Narasimhan, R (2023) Notch sensitivity of combined mode I–II fracture behaviour of a rolled magnesium alloy. In: Philosophical Magazine Letters, 103 (1).

Basavaraj, MG and Gupta, GS (2002) Measurement of axial dispersion coefficient in a packed bed using X-ray. In: Materials and Manufacturing Processes, 17 (5). pp. 683-692.

Basavaraj, MG and Gupta, GS and Naveen, K and Rudolph, V and Bali, R (2005) Local Liquid Holdups and Hysteresis in a 2-D Packed Bed Using X-ray Radiography. In: AIChE Journal, 51 (8). pp. 2178-2189.

Basavaraju, U and Bajpai, Y and Nagahanumaiah, . and Ramamurthy, PC (2024) A comparative study of two-step and three-step annealing processes for PVDF added FASnI3 film quality and solar cell. In: UNSPECIFIED.

Basavaraju, U and Nath, B and Nagahanumaiah, N and Ramamurthy, PC (2022) Comparison of polymeric and metal oxide hole transport material on the stability of FASnI3 perovskite solar cell. In: 2022 IEEE International Conference on Emerging Electronics, ICEE 2022, 11- 14 Dec 2022, Bangalore, India.

Basha, Dudekula Althaf and Ravishankar, N and Chattopadhyay, K (2017) Size-dependent solubility and phase transformation behavior of Sn-Cd nanoparticles in an Al matrix. In: JOURNAL OF MATERIALS SCIENCE, 52 (9). pp. 5194-5207.

Basu, S and Lahiri, AK and Seetharaman, S (2009) Distribution of phosphorus and oxygen between liquid steel and basic oxygen steelmaking slag. In: Revue de Metallurgie, 106 (1). 21+.

Basu, Abhisek and Jana, Rajesh and Ranjan, Rajeev and Mukherjee, Goutam Dev (2016) Pressure effects on model ferroelectric BiFeO3-PbTiO3: Multiple phase transitions. In: PHYSICAL REVIEW B, 93 (21).

Basu, J and Nagendra, N and Li, Y and Ramamurty, U (2003) Microstructure and mechanical properties of a partially crystallized La-based bulk metallic glass. In: Philosophical Magazine, 83 (15). pp. 1747-1760.

Basu, Joysurya and Louzguine, DV and Inoue, A and Ranganathan, S (2002) Nanocrystallisation and Nanoquasicrystallisation in (Ti/Hf)-Zr-(Ni/Cu) Ternary Alloys. In: MRS Proceedings, 754 .

Basu, Joysurya and Louzguine, DV and Inoue, A and Ranganathan, S (2004) Synthesis and devitrification of glassy Zr–Ti–Ni and Zr–Hf–Ni ternary alloys. In: Journal of Non-Crystalline Solids, 334-33 . pp. 270-275.

Basu, Joysurya and Murty, BS and Ranganathan, S (2008) Glass forming ability: Miedema approach to (Zr, Ti, Hf)–(Cu, Ni) binary and ternary alloys. In: Journal of Alloys and Compounds, 465 (1-2). pp. 163-172.

Basu, Joysurya and Ranganathan, S (2003) Bulk metallic glasses: A new class of engineering materials. In: Sadhana-Academy Proceedings in Engineering Sciences, 28 (3-4). pp. 783-798.

Basu, Joysurya and Ranganathan, S (2004) Crystallisation in Al-ETM-LTM-La metallic glasses. In: Intermetallics, 12 (10-11). pp. 1045-1050.

Basu, Joysurya and Ranganathan, S (2004) Crystallisation in Al–ETM–LTM–La metallic glasses. In: Intermetallics, 12 (10-11). pp. 1045-1050.

Basu, Joysurya and Ranganathan, S (2009) Glass forming ability and stability: Ternary Cu bearing Ti, Zr, Hf alloys. In: Intermetallics, 17 (3). pp. 128-135.

Basu, Joysurya and Ranganathan, S (2006) Glass-forming ability and stability of ternary Ni-early transition metal (Ti/Zr/Hf) alloys. In: Acta Materialia, 54 (14). pp. 3637-3646.

Basu, S and Seetharaman, S and Lahiri, AK (2010) Thermodynamics of Phosphorus and Sulphur Removal during Basic Oxygen Steelmaking. In: International Conference on Advances in the Theory of Ironmaking and Steelmaking, DEC 09-11, 2009, Bangalore, INDIA,, pp. 932-939.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadr (2007) Phosphorus Partition between Liquid Steel and CaO-SiO2-P2O5-MgO Slag Containing Low FeO. In: Metallurgical and Materials Transactions B, 38 (3). pp. 357-366.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2010) Activity of Ferric Oxide in Steelmaking Slag. In: Metallurgical and Materials Transactions B, 41 (2). pp. 414-419.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2008) Activity of Iron Oxide in Steelmaking Slag. In: Metallurgical and Materials Transactions B, 39 (3). pp. 447-456.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2007) A Model for Activity Coefficient of P2O5 in BOF Slag and Phosphorus Distribution between Liquid Steel and Slag. In: ISIJ International, 47 (8). pp. 1236-1238.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2007) Phosphorus Partition between Liquid Steel and $CaO-SiO_2-FeO_x -P_2O_5-MgO$ Slag Containing 15 to 25 Pct FeO. In: Metallurgical and Materials Transactions B, 38 (4). pp. 623-630.

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri and Halder, Jayanta (2007) Change in Phosphorus Partition during Blowing in a Commercial BOF. In: ISIJ International, 47 (5). pp. 766-768.

Basumatary, H and Arout Chelvane, J and Singh, V and Ranjan, R (2021) Microscopic and Magnetic Investigations in Sputtered Sm-Fe Thin Films. [Book Chapter]

Basumatary, Himalay and Chelvane, Arout J and Rao, Sridhara DV and Kamat, SV and Ranjan, Rajeev (2015) Effect of sputtering parameters on the structure, microstructure and magnetic properties of Tb-Fe films. In: THIN SOLID FILMS, 583 . pp. 1-6.

Basumatary, Himalay and Chelyane, Arout J and Rao, Sridhara DV and Kamat, SV and Ranjan, R (2015) Influence of substrate temperature on structure, microstructure and magnetic properties of sputtered Fe-Ga thin films. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 384 . pp. 58-63.

Basumatary, Himalay and Jeyaramane, Arout Chelvane and Kamat, SV and Ranjan, Rajeev (2016) Structural and Magnetic Properties of Amorphous Tb-Dy-Fe-Co Thin Films. In: JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM, 29 (3). pp. 863-867.

Bauri, R and Pancholi, V and Samajdar, I and Surappa, MK (2005) Relating microtexture and dynamic micro hardness in an extruded AA8090 alloy and AA8090-8 vol% $SiC_{p}$ composite. In: Science and Technology of Advanced Materials, 6 (8). pp. 933-938.

Bauri, Ranjit and Surappa, MK (2005) Damping Behavior of $Al-Li-SiC_p$ Composites Processed by Stir Casting Technique. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (3). pp. 667-673.

Bauri, Ranjit and Surappa, MK (2005) Investigations on serrated flow in 8090 Al alloy and 8090 Al-SiCp composites occurring during dynamic ultra low load micro hardness (DUH) indentation. In: Materials Science & Engineering, A, 393 (1-2). pp. 22-26.

Bauri, Ranjit and Surappa, MK (2009) Processing and compressive strength of Al-Li-SiCp composites fabricated by a compound billet technique. In: Journal of Materials Processing Technology, 209 (4). pp. 2077-2084.

Bauri, Ranjit and Surappa, MK (2007) Processing and properties of $Al-Li-SiC_p$ composites. In: Science and Technology of Advanced Materials, 8 (6). pp. 494-502.

Bauri, Ranjit and Surappa, MK (2008) Sliding wear behavior of Al-Li-SiCp composites. In: Wear, 265 (11-12). pp. 1756-1766.

Bawane, Kaustubh Krishna and Srinivasan, Dheepa and Banerjee, Dipankar (2018) Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (9, SI). pp. 3793-3811.

Beausir, Benoit and Biswas, Somjeet and Kim, Dong Ik and Toth, Laszlo S and Suwas, Satyam (2009) Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. In: Acta Materialia, 57 (17). pp. 5061-5077.

Beausir, Benoit and Fressengeas, Claude and Gurao, Nilesh P and Toth, Laszlo S and Suwas, Satyam (2009) Spatial correlation in grain misorientation distribution. In: Acta Materialia, 57 (18). pp. 5382-5395.

Beere, HK and Kulkarni, P and Maiti, UN and Balakrishna, RG and Mukherjee, P and Jung, HY and Samanta, K and Ghosh, D (2023) Achieving favourable oxygen electrocatalytic activity with compositionally complex metal molybdates. In: Sustainable Energy and Fuels, 7 (17). 4303 -4316.

Beere, HK and Reddy, NS and Kulkarni, P and Samanta, K and Jung, HY and Ghosh, D (2024) Compositionally complex ball-in-ball type metal oxide anode via laser-induced fast fabrication for binder-free high-capacity Li-ion batteries. In: Journal of Energy Storage, 80 .

Behera, AN and Chaudhuri, A and Kapoor, R and Chakravartty, JK and Suwas, S (2016) High temperature deformation behavior of Nb-1 wt.%Zr alloy. In: MATERIALS & DESIGN, 92 . pp. 750-759.

Behera, M and Panigrahi, A and Bönisch, M and Shankar, G and Mishra, PK (2022) Structural stability and thermal expansion of TiTaNbMoZr refractory high entropy alloy. In: Journal of Alloys and Compounds, 892 .

Behera, M and Rajput, M and Acharya, S and Nadammal, N and Suwas, S and Chatterjee, K (2021) Zinc and cerium synergistically enhance the mechanical properties, corrosion resistance, and osteogenic activity of magnesium as resorbable biomaterials. In: Biomedical Materials (Bristol), 16 (4).

Behera, SK and Ramamurthy, PC (2024) Structural characterization and functional assessment of exchange-correlation functionals in van der Waals TMDs AB2 (A = Mo, W; B = S, Se, Te). In: New Journal of Chemistry .

Behera, Sunil Kumar and Devabharathi, Nehru and Pradhan, Jyoti Ranjan and Mondal, Sandeep Kumar and Dasgupta, Subho (2019) Concurrent Subthermionic and Strong Thermionic Transport in Inkjet-Printed Indium Zinc Oxide/Silver Hybrid-Channel Field-Effect Transistors. In: ADVANCED ELECTRONIC MATERIALS, 5 (10).

Ben Thomas, Midhun and Vaidyanathan, Mahalakshmi and Radhakrishnan, Krishna and Raichur, Ashok M (2014) Enhanced viability of probiotic Saccharomyces boulardii encapsulated by layer-by-layer approach in pH responsive chitosan-dextran sulfate polyelectrolytes. In: JOURNAL OF FOOD ENGINEERING, 136 . pp. 1-8.

Benjamin, A and Singh, NP and Singh, M (2024) Advanced nanomaterials for water oxidation and hydrogen generation. [Book Chapter]

Bera, G and Surampalli, A and Riddick, ML and Reddy, VR and Sathe, VG and Turpu, GR and Welter, E and Sagdeo, A and Meneghini, C (2024) Local structural investigation across the magnetic transition in the type-II multiferroic material FeVO4. In: Physical Review B, 109 (7).

Berlia, Rohit and Kumar, Punith MK and Srivastava, Chandan (2015) Electrochemical behavior of Sn-graphene composite coating. In: RSC ADVANCES, 5 (87). pp. 71413-71418.

Berlia, Rohit and Kumar, Punith MK and Srivastava, Chandan (2015) Synthesis and electrochemical behaviour of NiFeCr nanoparticle coatings. In: RSC ADVANCES, 5 (39). pp. 30877-30881.

Berlia, Rohit and Singh, Mahander Pratap and Kumar, Punith MK and Srivastava, Chandan (2015) Synthesis and Electron Microscopy of Superalloy Nanowires. In: ECS ELECTROCHEMISTRY LETTERS, 4 (2). D1-D3.

Beyerlein, IJ and Toth, LS and Tome, CN and Suwas, S (2007) Role of twinning on texture evolution of silver during equal channel angular extrusion. In: Philosophical Magazine, 87 (6). pp. 885-906.

Bhadak, B and Singh, RK and Choudhury, A (2020) Equilibrium Multi-precipitate Configurations. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Bhadak, Bhalchandra and Sankarasubramanian, R and Choudhury, Abhik (2018) Phase-Field Modeling of Equilibrium Precipitate Shapes Under the Influence of Coherency Stresses. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (11). pp. 5705-5726.

Bhadra, A and Swathilakshmi, S and Mittal, U and Sharma, N and Sai Gautam, G and Kundu, D (2024) Averting H+-Mediated Charge Storage Chemistry Stabilizes the High Output Voltage of LiMn2O4-Based Aqueous Battery. In: Small Methods .

Bhale, Pranav and Shastri, H and Mondal, AK and Masanta, M and Kumar, S (2016) Effect of Deep Cryogenic Treatment on Microstructure and Properties of AE42 Mg Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 25 (9). pp. 3590-3598.

Bhandary, Subhrajyoti and Mangalampalli, Kiran SRN and Ramamurty, Upadrasta and Chopra, Deepak (2018) Crystal Structure-Mechanical Property Correlations in N-(3-Ethynylphenyl)-3-fluorobenzamide Polymorphs. In: CRYSTAL GROWTH & DESIGN, 18 (1). pp. 47-51.

Bharathy, Vijai P and Yang, Q and Kiran, MSRN and Rha, JongJoo and Nataraj, D and Mangalaraj, D (2012) Reactive biased target ion beam deposited W-DLC nanocomposite thin films - Microstructure and its mechanical properties. In: DIAMOND AND RELATED MATERIALS, 23 . pp. 34-43.

Bharati, Avanish and Xavier, Priti and Kar, Goutam Prasanna and Madras, Giridhar and Bose, Suryasarathi (2014) Nanoparticle-Driven Intermolecular Cooperativity and Miscibility in Polystyrene/Poly(vinyl methyl ether) Blends. In: JOURNAL OF PHYSICAL CHEMISTRY B, 118 (8). pp. 2214-2225.

Bhargava, NRMR and Samajdar, I and Ranganathan, S and Surappa, MK (1998) Role of cold work and SiC reinforcements on the beta '/beta precipitation in Al-10 pct Mg alloy. In: Metallurgical and Materials Transactions A, 29 (11). pp. 2835-2842.

Bhaskar, MS (2017) Effect of differential diffusivity on precipitate growth in ternary two-phase alloys: a phase field study. In: PHILOSOPHICAL MAGAZINE, 97 (19, A). pp. 1610-1627.

Bhaskar, MS and Abinandanan, TA (2018) Effect of different solute diffusivities on precipitate coarsening in ternary alloys. In: COMPUTATIONAL MATERIALS SCIENCE, 146 . pp. 73-83.

Bhaskar, MS and Surappa, MK (2019) Effect of Recovery and Recrystallization on the Damping Behaviour of A356/SiC p Composites. In: Transactions of the Indian Institute of Metals, 72 (4). pp. 849-857.

Bhaskar, Nitu and Padmavathy, Nagarajan and Jain, Shubham and Bose, Suryasarathi and Basu, Bikramjit (2016) Modulated in Vitro Biocompatibility of a Unique Cross-Linked Salicylic Acid-Poly(epsilon-caprolactone)-Based Biodegradable Polymer. In: ACS APPLIED MATERIALS & INTERFACES, 8 (43). pp. 29721-29733.

Bhaskaran, TA and Krishnan, RV and Ranganathan, S (1994) An electron diffraction study of quasicrystals in Ti-37 at% Mn and Ti-24 at% Mn-13 at% Fe alloys. In: Bulletin of Materials Science, 17 (6). 795 -810.

Bhaskaran, TA and Krishnan, RV and Ranganathan, S (1995) On the decomposition of ? phase in some rapidly quenched titanium-eutectoid alloys. In: Metallurgical and Materials Transactions A, 26 (6). 1367-1377 .

Bhaskaran, TA and Seshadri, R and Krishnan, RV and Ranganathan, S (1988) Microstructural study of rapidly solidified titanium eutectoid alloysstar, open. In: Materials Science and Engineering, 98 . pp. 251-255.

Bhat, MV and Vasu, KI (1983) Relevance of microstructure to stress corrosion cracking in aluminum-5% zinc and aluminum-5% copper alloys containing titanium. In: Praktische Metallographie/Practical Metallography, 20 (3). pp. 130-137.

Bhat, MV and Vasu, KI (1983) Strain rate sensitivity of stress corrosion cracking in aluminum-5% copper and aluminum-5% zinc alloys containing titanium. In: Transactions of the Indian Institute of Metals, 36 (2). pp. 101-105.

Bhat, KL and Natarajan, KA and Ramachandran, T (1987) Electroleaching of Zinc leach residues. In: Hydrometallurgy, 18 (3). pp. 287-303.

Bhat, MSN and Surappa, MK and Nayak, Sudhaker HV (1991) Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites. In: Journal of Materials Science, 26 (18). pp. 4991-96.

Bhat, Pushpalatha C and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mössbauer studies of the corrosion products of iron formed in aqueous ammonium nitrate solution. In: Corrosion Science, 23 (7). pp. 733-752.

Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1992) Processing map for hot working of powder. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (8). pp. 2223-2230.

Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1993) Processing maps for hot-working of powder metallurgy 1100 Al-10 vol % SiC-particulate metal-matrix composite. In: Journal of Materials Science (full set), 28 (8). pp. 2141-2147.

Bhat, Soumya S and Li, Wei and Cheetham, Anthony K and Waghmare, Umesh V and Ramamurty, Upadrasta (2016) A first-principles study of pressure-induced phase transformation in a rare-earth formate framework. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (28). pp. 19032-19036.

Bhat, Soumya S and Waghmare, Umesh V and Ramamurty, U (2013) Pressure induced structural phase transformation in TiN: a first-principles study. In: Journal of Applied Physics, 113 (13). 133507_1-133507_7.

Bhat, Soumya S and Waghmare, Umesh V and Ramamurty, Upadrasta (2015) Effect of oxygen vacancies on the elastic properties of zinc oxide: A first-principles investigation. In: COMPUTATIONAL MATERIALS SCIENCE, 99 . pp. 133-137.

Bhat, Soumya S and Waghmare, Umesh V and Ramamurty, Upadrasta (2014) First-Principles Study of Structure, Vibrational, and Elastic Properties of Stoichiometric and Calcium-Deficient Hydroxyapatite. In: CRYSTAL GROWTH & DESIGN, 14 (6). pp. 3131-3141.

Bhatia, Tania and Chattopadhyay, Kamanio and Jayaram, Vikram (2001) Effect of Rapid Solidification on Microstructural Evolution in $MgO-MgAl_2O_4$. In: Journal of the American Ceramic Society, 84 (8). pp. 1873-1880.

Bhatia, T and Chattopadhyay, K and Jayaram, V (1997) Effect of liquid precursor pyrolysis on phase selection in the $MgO-MgAl_2$$O_4$ system. In: 9th International Conference on Rapidly Quenched and Metastable Materials, AUG 25-30, 1996, BRATISLAVA, SLOVAKIA, pp. 930-937.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1997) Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl2O4 system. In: Ninth International Conference on Rapidly Quenched and Metastable Materials, Aug 25-30, 1996, Bratislava, Slovakia.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the $MgO-MgAl_{2}O_{4}$ system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the MgO–MgAl2O4 system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.

Bhattacharjee, Y and Bapari, S and Bose, S (2020) Mechanically robust, UV screener core-double-shell nanostructures provide enhanced shielding for em radiations over wide angle of incidence. In: Nanoscale, 12 (29). pp. 15775-15790.

Bhattacharjee, Y and Biswas, S and Bose, S (2019) Thermoplastic polymer composites for EMI shielding applications. [Book Chapter]

Bhattacharjee, Y and Bose, S (2021) Core-Shell Nanomaterials for Microwave Absorption and Electromagnetic Interference Shielding: A Review. In: ACS Applied Nano Materials, 4 (2). pp. 949-972.

Bhattacharjee, Y and Chatterjee, D and Bose, S (2018) Core-Multishell Heterostructure with Excellent Heat Dissipation for Electromagnetic Interference Shielding. In: ACS Applied Materials and Interfaces, 10 (36). pp. 30762-30773.

Bhattacharjee, Yudhajit and Arief, Injamamul and Bose, Suryasarathi (2017) Recent trends in multi-layered architectures towards screening electromagnetic radiation: challenges and perspectives. In: JOURNAL OF MATERIALS CHEMISTRY C, 5 (30). pp. 7390-7403.

Bhattacharjee, Yudhajit and Bhingardive, Viraj and Biswas, Sourav and Bose, Suryasarathi (2016) Construction of a carbon fiber based layer-by-layer (LbL) assembly - a smart approach towards effective EMI shielding. In: RSC Advances, 6 (113). pp. 112614-112619.

Bhattacharjee, Yudhajit and Chatterjee, Dipanwita (2017) Mercaptobenzoheterocyclic compounds functionalized silver nanoparticle, an ultrasensitive colorimetric probe for Hg(II) detection in water with picomolar precision: A correlation between sensitivity and binding affinity. In: SENSORS AND ACTUATORS B-CHEMICAL, 255 (1). pp. 210-216.

Bhattacharya, P and Chattopadhyay, K (1998) Nucleation behaviour of nanodispersed Pb in SiO2 matrix produced by sol-gel route. In: Material TransactionsJIM, 39 (01). pp. 75-79.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2007) Phase transformation in nanoscale indium-tin alloy particles embedded in metallic matrices. In: Journal of Nanoscience and Nanotechnology, 7 (6). pp. 1736-1743.

Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb-Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.

Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb–Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.

Bhattacharya, P and Bysakh, S and Ishihara, KN and Chattopadhyay, K (2001) New observation on heating Ni-Al multilayers of 10 nm periodicity. In: Scripta Materialia, 44 (8-9). pp. 1831-1835.

Bhattacharya, P and Chattopadhyay, K (1999) Nano $Al_2O_3-Pb$ and $SiO_2-Pb$ cermets by sol-gel technique and the phase transformation study of the embedded Pb particles. In: Nanostructured Materials, 12 (5-8). pp. 1077-1080.

Bhattacharya, P and Chattopadhyay, K (1999) Nano Al2O3-Pb AND SiO2-Pb cermets by sol-gel technique and the phase transformation study of the embedded Pb particles. In: The Fourth International Conference on Nanostructured Materials (NANO '98), JUN 14-19, 1998, Stockholm, Sweden.

Bhattacharya, P and Chattopadhyay, K and Bellon, P and Ishihara, KN (2004) Phase evolution and microtwins in the Ni–Al multilayers upon annealing and laser mixing. In: Materials Science and Engineering A, 375-37 . 1277–1284.

Bhattacharya, P and Ishihara, KN and Chattopadhyay, K (2001) FeAl multilayers by sputtering: heat treatment and the phase evolution. In: Materials Science & Engineering A, 304-30 . pp. 250-254.

Bhattacharya, P and Majumdar, B and Chattopadhyay, K (1999) Nanoscale embedded alloy particles through rapid solidification: the case of Al-Pb-In and Cu-Fe-Si. In: Journal of Electron Microscopy, 48 . pp. 1047-1053.

Bhattacharya, V and Chattopadhyay, K and Ayyub, P (2005) Synthesis, transformation and superconductivity of dual phase In-Sn alloy nanoparticles embedded in an Al matrix. In: Philosophical Magazine Letters, 85 (11). pp. 577-585.

Bhattacharya, Victoria and Bhattacharya, P and Chattopadhyay, K (2002) Study of embedded lead-tin nanoparticles in aluminum matrix. In: Materials Science Forum, 386-3 . pp. 427-432.

Bhattacharya, Victoria and Chattopadhyay, K (2004) Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids. In: Acta Materialia, 52 (8). pp. 2293-2304.

Bhattacharya, Victoria and Chattopadhyay, K (2004) Morphology and phase transformation of nanoscaled indium–tin alloys in aluminium. In: Materials Science and Engineering A, 375-37 . pp. 932-935.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2007) Melting of multiphase nano-scaled particles embedded in Al matrix: Case of Pb–Sn and Bi–Sn alloys. In: Materials Science and Engineering A, 449-45 . pp. 1003-1008.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2001) Microstructure and Tribological Behaviour of Nano-Embedded AI-Alloys. In: Scripta Materialia, 44 (8-9). pp. 1677-1682.

Bhattacharya, Victoria and Yamasue, E and Ishihara, KN and Chattopadhyay, K (2005) On the origin and stability of the metastable phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix. In: Acta Materialia, 53 (17). pp. 4593-4603.

Bhattacharyya, Abir and Singh, Gaurav and Prasad, Eswar K and Narasimhan, R and Ramamurty, U (2015) On the strain rate sensitivity of plastic flow in metallic glasses. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 625 . pp. 245-251.

Bhattacharyya, Saswata and Abinandanan, TA (2009) Evolution of multivariant microstructures with anisotropic misfit: A phase field study. In: Acta Materialia, 57 (3). pp. 646-656.

Bhattacharyya, Saswata and Abinandanan, TA (2003) A study of phase separation in ternary alloys. In: Bulletin of Materials Science, 26 (1). pp. 193-197.

Bhattacharyya, Saswata and Bandyopadhyay, Soumya and Choudhury, Abhik (2016) Phase-Field Modeling of Electrochemical Phenomena. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 96 (3). pp. 257-268.

Bhingardive, Viraj and Kar, Goutam Prasanna and Bose, Suryasarathi (2016) Lightweight, flexible and ultra-thin sandwich architectures for screening electromagnetic radiation. In: RSC ADVANCES, 6 (74). pp. 70018-70024.

Bhingardive, Viraj and Sharma, Maya and Suwas, Satyam and Madras, Giridhar and Bose, Suryasarathi (2015) Polyvinylidene fluoride based lightweight and corrosion resistant electromagnetic shielding materials. In: RSC ADVANCES, 5 (45). pp. 35909-35916.

Bhingardive, Viraj and Suwas, Satyam and Bose, Suryasarathi (2015) New physical insights into the electromagnetic shielding efficiency in PVDF nanocomposites containing multiwall carbon nanotubes and magnetic nanoparticles. In: RSC ADVANCES, 5 (97). pp. 79463-79472.

Bhingardive, Viraj and Woldu, Tesfakiros and Biswas, Sourav and Kar, Goutam Prasanna and Thomas, Sabu and Kalarikkal, Nandakumar and Bose, Suryasarathi (2016) Microwave Absorption in MWNTs-Based Soft Composites Containing Nanocrystalline Particles as Magnetic Core and Intrinsically Conducting Polymer as a Conductive Layer. In: CHEMISTRYSELECT, 1 (15). pp. 4747-4752.

Bhogra, Meha and Ramamurty, U and Waghmare, Umesh V (2015) Smaller is Plastic: Polymorphic Structures and Mechanism of Deformation in Nanoscale hcp Metals. In: NANO LETTERS, 15 (6). pp. 3697-3702.

Bhogra, Meha and Ramamurty, U and Waghmare, Umesh V (2014) Temperature-dependent stability of stacking faults in Al, Cu and Ni: first-principles analysis. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 26 (38).

Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a $Zr_{41}Ti_{14}Cu_{12}Ni_{10}Be_{23}$ bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2). pp. 437-444.

Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a Zr41Ti14Cu12Ni10Be23 bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2).

Bhowmick, R and Raghavan, R and Chattopadhyay, K and Ramamurty, U (2006) Plastic flow softening in a bulk metallic glass. In: Acta Materialia, 54 (16). pp. 4221-4228.

Bhowmick, Ranadeep and Majumdar, Bhaskar and Misra, Dinesh K and Ramamurty, Upadrasta and Chattopadhyay, K (2007) Synthesis of bulk metallic glass composites using high oxygen containing Zr sponge. In: Journal of Materials Science, 42 (22). pp. 9359-9365.

Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.

Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.

Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.

Bhowmick, S and Waghmare, UV (2010) Anisotropy of the Stone-Wales defect and warping of graphene nanoribbons: A first-principles analysis. In: Physical Review B: Condensed Matter and Materials Physics, 81 (15).

Bhowmick, S and Xie, ZH and Hoffman, M and Jayaram, V and Biswas, SK (2004) Nature of contact deformation of TiN films on steel. In: Journal Of Materials Research, 19 (9). pp. 2616-2624.

Bhowmik, Ayan and Biswas, Somjeet and Dhinwal, Satyaveer Singh and Sarkar, Apu and Ray, Ranjit Kumar and Bhattacharjee, Debashish and Suwas, Satyam (2012) Microstructure and Texture Evolution in Interstitial-free (IF) Steel processed by Multi-Axial Forging. In: 16th International Conference on the Textures of Materials (ICOTOM 16, DEC 12-17, 2011 , Indian Inst Technol Bombay, Mumbai, INDIA, pp. 774-777.

Bhowmik, Ayan and Biswas, Somjeet and Suwas, Satyam and Ray, RK and Bhattacharjee, D (2009) Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion. In: Metallurgical and Materials Transactions A, 40A (11). pp. 2729-2742.

Bhure, S and Nalajala, D and Choudhury, A (2024) Near Single-Crystalline CMSX-4 Superalloy Builds with Laser-Directed Energy Deposition (L-DED) Using Model-Informed Experiments. In: 15th International Symposium on Superalloys, 8 August 2024 through 12 August 2024, Pennsylvania, pp. 849-859.

Bhure, S and Nalajala, D and Choudhury, A (2023) Toward DS/SX Ni-Based Superalloy Components Using L-DED: A Multi-scale Modeling and Experimental Approach. In: Transactions of the Indian Institute of Metals .

Bhusari, Shardul Atul and Sharma, Vidushi and Bose, Suryasarathi and Basu, Bikramjit (2019) HDPE/UHMWPE hybrid nanocomposites with surface functionalized graphene oxide towards improved strength and cytocompatibility. In: JOURNAL OF THE ROYAL SOCIETY INTERFACE, 16 (150).

Bian, B and Taheriniya, S and Muralikrishna, GM and Godha, A and Makineni, SK and Sankaran, S and Straumal, BB and Du, Y and Wilde, G and Divinski, SV (2023) Kinetic and structural insights into the grain boundary phase transitions in Ni-Bi alloys. In: Acta Materialia, 245 .

Bibhanshu, N and Bhattacharjee, A and Suwas, S (2020) Hot deformation response of titanium aluminides Ti�45Al-(5, 10)Nb-0.2B-0.2C with pre-conditioned microstructures. In: Journal of Alloys and Compounds, 832 .

Bibhanshu, N and Prasad, N and Nayan, N and Avadhani, GS and Ray, RK and Suwas, S (2022) Mechanical response of as-cast equiatomic high entropy alloy CuFeCoNiMn. In: Intermetallics, 143 .

Bibhanshu, N and Shankar, G and Suwas, S (2020) Hot deformation and softening response in boron-modified two-phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .

Bibhanshu, N and Shankar, G and Suwas, S (2021) Hot deformation and softening response in boronmodified two�phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .

Bibhanshu, N and Suwas, S (2020) Mechanism of shear band formation and dynamic softening in a two-phase (α2 + γ) titanium aluminide. In: Journal of Materials Research, 35 (13). pp. 1635-1646.

Bibhanshu, Nitish and Bhattacharjee, Amit and Suwas, Satyam (2019) Influence of Temperature and Strain Rate on Microstructural Evolution During Hot Compression of Ti-45Al-xNb-0.2C-0.2B Titanium Aluminide Alloys. In: JOM, 71 (10). pp. 3552-3564.

Bibhanshu, Nitish and Suwas, Satyam (2018) Hot Deformation and Dynamic Recrystallization in Titanium Aluminide. In: 10th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC), JUL 09-13, 2018, Cite Sci Paris, Paris, FRANCE, pp. 1391-1396.

Bijapur, K and Mandal, S and Siddheshwar, PG and Bose, S and Hegde, G (2024) Experimental investigation of a biomass-derived nanofluid with enhanced thermal conductivity as a green, sustainable heat-transfer medium and qualitative comparison via mathematical modelling. In: Nanoscale Advances .

Bindu, R and Singh, Sanjay and Singh, Navneet and Ranjan, Rajeev and Maiti, Kalobaran and Hill, AH and Barman, SR (2012) Evidence of nanoscale structural phase separation in large bandwidth La0.2Sr0.8MnO3. In: Physical Review B, 86 (14). pp. 140104-1.

Bishnoi, M and Deepika, A and Mody, N and Jain, A (2022) Biomedical Applications of Nano-Biosensor. [Book Chapter]

Bishnoi, M and Jain, A and Singla, Y and Shrivastava, B (2020) Sublingual delivery of chondroitin sulfate conjugated tapentadol loaded nanovesicles for the treatment of osteoarthritis. In: Journal of Liposome Research, 31 (1). pp. 30-44.

Bisht, A and Kamble, N and Kumar, L and Avadhani, GS and Roy, A and Silberschmidt, V and Suwas, S (2019) Deformation response and microstructural evolution of as-cast Mg alloys AM30 and AM50 during hot compression. In: International Journal of Materials Research, 110 (6). pp. 524-533.

Bisht, A and Kumar, S and Pang, KH and Zhou, A and Roy, A and Silberschmidt, VV and Suwas, S (2020) Shear band widening mechanism in Ti-6Al-4V under high strain rate deformation. In: Journal of Materials Research, 35 (13). pp. 1623-1634.

Bisht, A and Neogi, A and Mitra, N and Jagadeesh, G and Suwas, S (2019) Investigation of the elastically shock-compressed region and elastic-plastic shock transition in single-crystalline copper to understand the dislocation nucleation mechanism under shock compression. In: SHOCK WAVES, 29 (7). pp. 913-927.

Bisht, A and Roy, A and Dixit, US and Suwas, S and Silberschmidt, VV (2019) Small-Scale Machining Simulations. [Book Chapter]

Bisht, A and Yadav, V and Suwas, S and Dixit, U S (2018) Deformation Behavior of AM30 Magnesium Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (9). pp. 4900-4910.

Bisht, Anuj and Gaddam, Supreeth and Kumar, Lailesh and Dileep, BP and Suwas, Satyam (2018) Precipitation Behavior of IN718 After Surface Mechanical Attrition Treatment (SMAT) and Its Effect on Wear Properties. In: Journal of The Minerals, Metals & Materials Society, The, 70 (11). pp. 2667-2676.

Bisht, Anuj and Kalsar, Rajib and Adak, Amitava and Dey, Indranuj and Jana, Kamalesh and Lad, Amit and Kumar, G Ravindra and Jagadeesh, Gopalan and Suwas, Satyam (2018) Observation of ex-situ microstructure relaxation of non-conventional misorientations post femtosecond laser shock exposure in cp-Ti. In: ACTA MATERIALIA, 150 . pp. 161-172.

Bisht, Anuj and Kumar, Lailesh and Subburaj, Janardhanraj and Jagadeesh, Gopalan and Suwas, Satyam (2019) Effect of stacking fault energy on the evolution of microstructure and texture during blast assisted deformation of FCC materials. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271 . pp. 568-583.

Bisht, Anuj and Ray, Nachiketa and Jagadeesh, Gopalan and Suwas, Satyam (2017) Microstructural and crystallographic response of shock-loaded pure copper. In: JOURNAL OF MATERIALS RESEARCH, 32 (8). pp. 1484-1498.

Biswas, K and Chattopadhyay, K (2008) Formation of ω-Al7Cu2Fe phase during laser processing of quasicrystal-forming Al-Cu-Fe alloy. In: Philosophical Magazine Letters, 88 (3). 219 -230.

Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe-25 at.% Ge thin film. In: Journal of Materials Research, 219 (1). pp. 174-184.

Biswas, Modhura and Raichur, Ashok M (2010) Dispersion of Zirconia in the Presence of Dolapix PC75. In: Journal of Dispersion Science and Technology, 31 (9). pp. 1173-1177.

Biswas, Aniruddha and Singh, Gaurav and Sarkar, Sudip Kumar and Krishnan, Madangopal and Ramamurty, Upadrasta (2014) Hot deformation behavior of Ni-Fe-Ga-based ferromagnetic shape memory alloy - A study using processing map. In: INTERMETALLICS, 54 . pp. 69-78.

Biswas, K and Das, Kumar P and Chattopadhyay, K (2007) Microstructural evolution and metastable phase formation in laser ablation-deposited films of Fe-rich Fe–Ge intermetallic compounds. In: Philosophical Magazine, 87 (2). pp. 307-323.

Biswas, K and Mordike, BL and Galun, R and Chattopadhyay, K (2004) The omega phase formation during laser cladding and remelting of quasicrystal forming AlCuFe on pure aluminum. In: Symposium on Quasicrystals 2003 - Preparation, Properties and Applications held at the 2003 MRS Fall Meeting, DEC 01-03, 2003, Boston, MA.

Biswas, K and Phanikumar, G and Chattopadhyay, K and Volkmann, T and Funke, O and Holland-Moritz, D and Herlach, DM (2004) Rapid solidification behaviour of undercooled levitated Fe–Ge alloy droplets. In: Materials Science and Engineering A, 375-37 . pp. 464-467.

Biswas, K and Phanikumar, G and Holland, Moritz D and Herlach, Dieter M and Chattopadhyay, K (2007) Disorder trapping and grain refinement during solidification of undercooled Fe–18 at% Ge melts. In: Philosophical Magazine, 87 (25). pp. 3817-3837.

Biswas, Krishanu and Basu, B and Suri, AK and Chattopadhyay, K (2006) A TEM study on TiB2-20%MoSi2 composite: Microstructure development and densification mechanism. In: Scripta Materialia, 54 (7). pp. 1363-1368.

Biswas, Krishanu and Chattopadhyay, K (2010) Microstructural Evolution during Laser Resolidification of Fe-18 At. Pct Ge Alloy. In: Mallurgical materials Transactions A, 41A (3). pp. 574-582.

Biswas, Krishanu and Chattopadhyay, Kamanio and Galun, Rolf and Mordike, Barry L (2003) The ω Phase Formation during Laser Cladding and Remelting of Quasicrystal Forming AlCuFe on Pure Aluminum. In: MRS Proceedings, 805 .

Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe–25 at.% Ge thin film. In: Journal of Materials Research, 21 (1). pp. 174-184.

Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2005) Laser Cladding of Quasi-Crystal-Forming Al-Cu-Fe-Bi on an Al-Si Alloy Substrate. In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 36A (7). pp. 1947-1964.

Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2004) Laser cladding of quasicrystal forming Al–Cu–Fe on aluminum. In: Journal of Non-Crystalline Solids, 334-33 . pp. 517-523.

Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% $ZrO_2$ nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.

Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% ZrO2 nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.

Biswas, Krishanu and Phanikumar, Gandham and Herlach, Dieter M and Chattopadhyay, Kamanio (2007) Non-equilibrium solidification of concentrated Fe–Ge alloys. In: Materials Science and Engineering A, 449-45 . pp. 12-17.

Biswas, Modhura and Raichur, Ashok M (2008) Electrokinetic and Rheological Properties of Nano Zirconia in the Presence of Rhamnolipid Biosurfactant. In: Journal of the American Ceramic Society, 91 (10). pp. 3197-3201.

Biswas, S and Kole, AK and Tiwary, CS and Kumbhakar, P (2016) Enhanced nonlinear optical properties of graphene oxide-silver nanocomposites measured by Z-scan technique. In: RSC ADVANCES, 6 (13). pp. 10319-10325.

Biswas, S and Kole, AK and Tiwary, CS and Kumbhakar, P (2016) Observation of Size-Dependent Electron-Phonon Scattering and Temperature-Dependent Photoluminescence Quenching in Triangular-Shaped Silver Nanoparticles. In: PLASMONICS, 11 (2). pp. 593-600.

Biswas, S and Muzata, TS and Krause, B and Rzeczkowski, P and Pötschke, P and Bose, S (2020) Does the type of polymer and carbon nanotube structure control the electromagnetic shielding in melt-mixed polymer nanocomposites? In: Journal of Composites Science, 4 (1).

Biswas, S and Panja, SS and Bose, S (2018) Tailored distribution of nanoparticles in bi-phasic polymeric blends as emerging materials for suppressing electromagnetic radiation: Challenges and prospects. In: Journal of Materials Chemistry C, 6 (13). pp. 3120-3142.

Biswas, S and Panja, SS and Bose, S (2020) The long-range π-conjugation between electron-rich species and multiwall carbon nanotubes influences the fluorescence lifetime and electromagnetic shielding. In: Nanoscale Advances, 2 (10). pp. 4464-4472.

Biswas, Somjeet and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2013) Evolution of texture and microstructure during hot torsion of a magnesium alloy. In: ACTA MATERIALIA, 61 (14). pp. 5263-5277.

Biswas, Somjeet and Brokmeier, HG and Fundenberger, JJ and Suwas, Satyam (2015) Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium. In: MATERIALS CHARACTERIZATION, 102 . pp. 98-102.

Biswas, Somjeet and Dhinwal, Satyaveer Singh and Suwas, Satyam (2010) Room-temperature equal channel angular extrusion of pure magnesium. In: Acta Materialia, 58 (9). pp. 3247-3261.

Biswas, Somjeet and Kim, Dong-Ik and Suwas, Satyam (2012) Asymmetric and symmetric rolling of magnesium: Evolution of microstructure, texture and mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 550 . pp. 19-30.

Biswas, Somjeet and Singh, Satyaveer D and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2015) Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (6). pp. 2598-2613.

Biswas, Somjeet and Singh, Satyaveer D and Bhowmik, Ayan and Suwas, Satyam (2008) Study of texture evolution of Pure Magnesium during ECAE using EBSD. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.

Biswas, Somjeet and Suwas, Satyam (2012) Evolution of sub-micron grain size and weak texture in magnesium alloy Mg-3Al-0.4Mn by a modified multi-axial forging process. In: Scripta Materialia, 66 (2). pp. 89-92.

Biswas, Somjeet and Suwas, Satyam and Sikand, R and Gupta, Anil K (2011) Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion. In: Materials Science and Engineering A, 528 (10-11). pp. 3722-3729.

Biswas, Sourav and Arief, Injamamul and Panja, Sujit S and Bose, Suryasarathi (2017) Electromagnetic screening in soft conducting composite-containing ferrites: the key role of size and shape anisotropy. In: Materials Chemistry Frontiers, 1 (12). pp. 2574-2589. ISSN 2052-1537

Biswas, Sourav and Arief, Injamamul and Panja, Sujit Sankar and Bose, Suryasarathi (2017) Absorption-Dominated Electromagnetic Wave Suppressor Derived from Ferrite-Doped Cross-Linked Graphene Framework and Conducting Carbon. In: ACS APPLIED MATERIALS & INTERFACES, 9 (3). pp. 3030-3039.

Biswas, Sourav and Bhattacharjee, Yudhajit and Panja, Sujit Sankar and Bose, Suryasarathi (2017) Graphene oxide co-doped with dielectric and magnetic phases as an electromagnetic wave suppressor. In: Materials Chemistry Frontiers, 1 (6). pp. 1229-1244. ISSN 2052-1537

Biswas, Sourav and Bhattacharjee, Yudhajit and Panja, Sujit Sankar and Bose, Suryasarathi (2017) Rational Design of Multilayer Ultrathin Nano-Architecture by Coupling of Soft Conducting Nanocomposite with Ferrites and Porous Structures for Screening Electromagnetic Radiation. In: CHEMISTRYSELECT, 2 (3). pp. 1094-1101.

Biswas, Sourav and Dutta, Suvanka and Panja, Sujit S and Bose, Suryasarathi (2017) Hollow Semiconductor Nanospheres-Anchored Graphene Oxide Sheets for Effective Microwave Absorption. In: CHEMISTRYSELECT, 2 (33). pp. 10840-10847.

Biswas, Sourav and Dutta, Suvanka and Panja, Sujit S and Bose, Suryasarathi (2019) Template-Free Synthesis of ``Wool-Ball''-Like Hollow CuS Structures Can Effectively Suppress Electromagnetic Radiation: A Mechanistic Insight. In: JOURNAL OF PHYSICAL CHEMISTRY C, 123 (28). pp. 17136-17147.

Biswas, Sourav and Kar, Goutam Prasanna and Arora, Deepshikha and Bose, Suryasarathi (2015) A unique strategy towards high dielectric constant and low loss with multiwall carbon nanotubes anchored onto graphene oxide sheets. In: RSC ADVANCES, 5 (31). pp. 24132-24138.

Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2015) Attenuating microwave radiation by absorption through controlled nanoparticle localization in PC/PVDF blends. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (41). pp. 27698-27712.

Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2015) Engineering nanostructured polymer blends with controlled nanoparticle location for excellent microwave absorption: a compartmentalized approach. In: NANOSCALE, 7 (26). pp. 11334-11351.

Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2015) Microwave absorbers designed from PVDF/SAN blends containing multiwall carbon nanotubes anchored cobalt ferrite via a pyrene derivative. In: JOURNAL OF MATERIALS CHEMISTRY A, 3 (23). pp. 12413-12426.

Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2016) Simultaneous Improvement in Structural Properties and Microwave Shielding of Polymer Blends with Carbon Nanotubes. In: CHEMNANOMAT, 2 (2). pp. 140-148.

Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2015) Tailor-Made Distribution of Nanoparticles in Blend Structure toward Outstanding Electromagnetic Interference Shielding. In: ACS APPLIED MATERIALS & INTERFACES, 7 (45). pp. 25448-25463.

Biswas, Sourav and Panja, Sujit S and Bose, Suryasarathi (2018) Physical Insight into the Mechanism of Electromagnetic Shielding in Polymer Nanocomposites Containing Multiwalled Carbon Nanotubes and Inverse-Spinel Ferrites. In: JOURNAL OF PHYSICAL CHEMISTRY C, 122 (34). pp. 19425-19437.

Biswas, Sourav and Panja, Sujit S and Bose, Suryasarathi (2017) Unique Multilayered Assembly Consisting of ``Flower-Like'' Ferrite Nanoclusters Conjugated with MWCNT as Millimeter Wave Absorbers. In: JOURNAL OF PHYSICAL CHEMISTRY C, 121 (26). pp. 13998-14009.

Biswas, Sourav and Panja, Sujit Sankar and Bose, Suryasarathi (2016) A novel fluorophore–spacer–receptor to conjugate MWNTs and ferrite nanoparticles to design an ultra-thin shield to screen electromagnetic radiation. In: Materials Chemistry Frontiers, 1 (1). pp. 132-145. ISSN 2052-1537

Biswas, Tathagata and Ranganathan, S (2006) Multicomponent alloys visualized as lower order alloys: Examples of quasicrystals and metallic glasses. In: Annales de chimie, 31 (6). pp. 649-656.

Boda, Sunil Kumar and Thrivikraman, Greeshma and Panigrahy, Bharati and Sarma, D D and Basu, Bikramjit (2017) Competing Roles of Substrate Composition, Microstructure, and Sustained Strontium Release in Directing Osteogenic Differentiation of hMSCs. In: ACS APPLIED MATERIALS & INTERFACES, 9 (23). pp. 19389-19408.

Boddapati, Srinivasa Rao and Rodel, Jurgen and Jayaram, Vikram (2007) Crack growth resistance (R-curve) behaviour and thermo-physical properties of $Al_2O_3$ particle-reinforced AlN/Al matrix composites. In: Composites Part A: Applied Science and Manufacturing, 38 (3). pp. 1038-1050.

Boenisch, Matthias and Panigrahi, Ajit and Calin, Mariana and Waitz, Thomas and Zehetbauer, Michael and Skrotzki, Werner and Eckert, Juergen (2017) Thermal stability and latent heat of Nb-rich martensitic Ti-Nb alloys. In: JOURNAL OF ALLOYS AND COMPOUNDS, 697 . pp. 300-309.

Bojjawar, G and Suwas, S and Chokshi, AH (2023) The Effect of Texture on the Hall-Petch Relationship in Severely Drawn Ni-Co Microwires. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Bojjawar, G and Suwas, S and Chokshi, AH (2022) Influence of Co content on the simultaneous enhancement of strength and ductility in severely drawn textured Ni-Co microwires. In: Philosophical Magazine Letters .

Bolanos-Benitez, Viviana and van Hullebusch, Eric D and Lens, Piet N L and Quantin, Cecile and van de Vossenberg, Jack and Subramanian, Sankaran and Sivry, Yann (2018) (Bio)leaching Behavior of Chromite Tailings. In: MINERALS, 8 (6).

Bommakanti, Aashranth and Roy, Shibayan and Suwas, Satyam (2016) Effect of hypoeutectic boron modification on the dynamic properties of Ti-6Al-4V alloy. In: JOURNAL OF MATERIALS RESEARCH, 31 (18). pp. 2804-2816.

Boopathy, Kombaiah and Hofmann, Douglas C and Johnson, William L and Ramamurty, Upadrasta (2009) Near-threshold fatigue crack growth in bulk metallic glass composites. In: Journal of Materials Research, 24 (12). pp. 3611-3619.

Bora, PJ and Anil, AG and Ramamurthy, PC and Lee, YH (2021) Chemically Room Temperature Crosslinked Polyvinyl Alcohol (PVA) with Anomalous Microwave Absorption Characteristics. In: Macromolecular Rapid Communications .

Bora, PJ and Anil, AG and Ramamurthy, PC and Tan, DQ (2020) MXene interlayered crosslinked conducting polymer film for highly specific absorption and electromagnetic interference shielding. In: Materials Advances, 1 (2). pp. 177-183.

Bora, PJ and Chandana, G and Mahanta, B and Doh, J and Ramamurthy, PC and Raghavan, N (2023) Optimization of PDMS -MWCNT nanocomposites for strong Ku-band absorption by integrating microwave simulations and genetic algorithm. In: Composites Communications, 39 .

Bora, PJ and Khanum, KK and Ramesh, RK and Vinoy, KJ and Ramamurthy, PC (2021) Porous fibres of a polymer blend for broadband microwave absorption. In: Materials Advances, 2 (11). pp. 3613-3619.

Bora, PJ and Kishore, Kishore and Ramamurthy, PC (2021) Polymer-metal/metal oxide-coated fly ash cenosphere composite film for electromagnetic interference shielding. [Book Chapter]

Bora, PJ and Mahanta, B and Anil, AG and Tan, DQ and Ramamurthy, PC (2021) Electromagnetic Data-Driven Approach to Realize the Best Microwave Absorption Characteristics of MXene-Based Nanocomposites. In: ACS Applied Electronic Materials, 3 (10). pp. 4558-4567.

Bora, PJ and Mahanta, B and Kishore, K and Ramamurthy, PC (2022) Design of Bi-Layered Strong Microwave Absorber Based on PolymerFly Ash Cenosphere Composite With A Data-Driven Approach. In: 2022 IEEE International Conference on Emerging Electronics, 11 -14 Dec 2022, Bangalore.

Bora, PJ and Mahanta, B and Kishore, Kishore and Ramamurthy, PC (2022) Data-driven methodology to realize strong and broadband microwave absorption properties of polymer-fly ash cenosphere composite. In: Journal of Applied Polymer Science, 139 (16).

Bora, PJ and Mahanta, B and Ramamurthy, PC (2022) Optimization of polyaniline nanofiber loading in polymer matrix for strong microwave absorption using materials data-driven discovery. In: Composites Communications, 35 .

Bora, PJ and Meghana Jois, HS and Kumar, TRS and Khasnabis, S and Ramamurthy, PC (2021) Tailorable microwave absorption characteristics of bio waste-based composites through a macroscopic design. In: Materials Advances, 2 (11). pp. 3715-3725.

Bora, Pritom J and Anil, Amith G and Vinoy, Kalarickaparambil J and Ramamurthy, Praveen C (2019) Outstanding Absolute Electromagnetic Interference Shielding Effectiveness of Cross-Linked PEDOT:PSS Film. In: ADVANCED MATERIALS INTERFACES, 6 (22).

Bora, Pritom J and Azeem, Irthasa and Vinoy, K J and Ramamurthy, Praveen C and Madras, Giridhar (2017) Microwave Absorption Property of PVBpolyaniline Nanocomposite. In: 2017 IEEE Asia Pacific Microwave Conference (APMC), NOV 13-16, 2017, Kuala Lumpur, MALAYSIA, pp. 674-677.

Bora, Pritom J and Azeem, Irthasa and Vinoy, KJ and Ramamurthy, Praveen C and Madras, Giridhar (2018) Polyvinylbutyral-Polyaniline Nanocomposite for High Microwave Absorption Efficiency. In: ACS OMEGA, 3 (12). pp. 16542-16548.

Bora, Pritom J and Gupta, Shalabh and Pecharsky, Vitalij K and Vinoy, K J and Ramamurthy, Praveen C and Hadimani, Ravi L (2019) Enhancement of microwave absorption bandwidth of polymer blend using ferromagnetic gadolinium silicide nanoparticles. In: MATERIALS LETTERS, 252 . pp. 178-181.

Bora, Pritom J and Lakhani, Gaurav and Ramamurthy, Praveen C and Madras, Giridhar (2016) Outstanding electromagnetic interference shielding effectiveness of polyvinylbutyral-polyaniline nanocomposite film. In: RSC ADVANCES, 6 (82). pp. 79058-79065.

Bora, Pritom J and Mallik, Nitin and Ramamurthy, Praveen C and Kishore, S and Madras, Giridhar (2016) Poly(vinyl butyral) -polyaniline-magnetically functionalized fly ash cenosphere composite film for electromagnetic interference shielding. In: COMPOSITES PART B-ENGINEERING, 106 . pp. 224-233.

Bora, Pritom J and Porwal, Mayuri and Vinoy, K J and Kishore, and Ramamurthy, Praveen C and Madras, Giridhar (2018) Industrial waste fly ash cenosphere composites based broad band microwave absorber. In: COMPOSITES PART B-ENGINEERING, 134 . pp. 151-163.

Bora, Pritom J and Porwal, Mayuri and Vinoy, KJ and Ramamurthy, Praveen C and Madras, Giridhar (2016) Influence of MnO2 decorated Fe nano cauliflowers on microwave absorption and impedance matching of polyvinylbutyral (PVB) matrix. In: MATERIALS RESEARCH EXPRESS, 3 (9).

Bora, Pritom J and Shahidsha, N and Madras, Giridhar and Kishore, * and Ramamurthy, Praveen C (2016) Novel poly (vinyl butyral) (PVB) /polyaniline-cenosphere composite film for EMI shielding. In: International Conference on Condensed Matter and Applied Physics (ICC), OCT 30-31, 2015, Bikaner, INDIA.

Bora, Pritom J and Vinoy, K J and Kishore, Kishore and Ramamurthy, Praveen C and Madras, Giridhar (2016) Lightweight Microwave Absorber from Industrial Waste Fly Ash Cenosphere. In: International Conference on Emerging Trends and Advances in Electrical Engineering and Renewable Energy (ETAEERE), DEC 17-18, 2016, INDIA, pp. 459-466. (Unpublished)

Bora, Pritom J and Vinoy, KJ and Ramamurthy, Praveen C and Kishore, Kishore and Madras, Giridhar (2017) Electromagnetic interference shielding effectiveness of polyaniline-nickel oxide coated cenosphere composite film. In: Composites Communications, 4 . pp. 37-42. ISSN 24522139

Bora, Pritom J and Vinoy, KJ and Ramamurthy, Praveen C and Kishore, Kishore and Madras, Giridhar (2016) Lightweight Polyaniline-Cobalt Coated Fly Ash Cenosphere Composite Film for Electromagnetic Interference Shielding. In: ELECTRONIC MATERIALS LETTERS, 12 (5). pp. 603-609.

Boruah, B and Samantaray, PK and Madras, G and Modak, J M and Bose, S (2020) Sustainable photocatalytic water remediation via dual active strongly coupled AgBiO3 on PVDF/PBSA membranes. In: Chemical Engineering Journal, 394 .

Bose, S and Pötschke, P and Bhattacharyya, AR (2016) Influence of Organic Modifier on Miscibility and Chain Scission of the PA6 Phase and the Extent of Multiwalled Carbon Nanotubes Dispersion in Co-Continuous PA6/ABS Blends. [Book Chapter]

Bose, Sangita and Bhattacharya, Victoria and Chattopadhyay, Kamanio and Ayyub, Pushan (2008) Proximity effect controlled superconducting behavior of novel biphasic Pb-Sn nanoparticles embedded in an Al matrix. In: Acta Materialia, 56 (16). pp. 4522-4528.

Bose, Suryasarathi and Sharma, Maya and Bharati, Avanish and Moldenaers, Paula and Cardinaels, Ruth (2016) A strategy to achieve enhanced electromagnetic interference shielding at ultra-low concentration of multiwall carbon nanotubes in P alpha MSAN/PMMA blends in the presence of a random copolymer PS-r-PMMA. In: RSC ADVANCES, 6 (32). pp. 26959-26966.

Brahma, Sanjaya and Jaiswal, P and Suresh, KS and Lo, Kuang-Yao and Suwas, Satyam and Shivashankar, SA (2015) Effect of substrates and surfactants over the evolution of crystallographic texture of nanostructured ZnO thin films deposited through microwave irradiation. In: THIN SOLID FILMS, 593 . pp. 81-90.

Brahma, Sanjaya and Rao, Kalya Jagannatha and Shivashankar, Srinivasarao (2010) Rapid growth of nanotubes and nanorods of wurtzite ZnO through microwave-irradiation of a metalorganic complex of zinc and a surfactant in solution. In: Bulletin of Materials Science, 33 (2). pp. 89-95.

Brahmaprakash, GP and Devasia, Preston and Jagadish, KS and Natarajan, KA and Rao, Ramananda G (1988) Development of Thiobacillus ferrooxidans ATCC 19859 strains tolerant to copper and zinc. In: Bulletin of Materials Science, 10 (5). pp. 461-465.

Brajesh, Kumar and Abebe, Mulualem and Ranjan, Rajeev (2016) Structural transformations in morphotropic-phase-boundary composition of the lead-free piezoelectric system Ba(Ti0.8Zr0.2)O-3 - (Ba0.7Ca0.3) TiO3. In: PHYSICAL REVIEW B, 94 (10).

Brajesh, Kumar and Himanshu, AK and Sharma, Himanshu and Kumari, Kiran and Ranjan, Rajeev and Bandhopadhyay, SK and Sinha, TP (2012) Structural, dielectric relaxation and piezoelectric characterization of Sr2+ substituted modified PMS-PZT ceramic. In: Physica B: Condensed Matter, 407 (4). pp. 635-641.

Brajesh, Kumar and Kalyani, Ajay Kumar and Ranjan, Rajeev (2015) Ferroelectric instabilities and enhanced piezoelectric response in Ce modified BaTiO3 lead-free ceramics. In: APPLIED PHYSICS LETTERS, 106 (1).

Brajesh, Kumar and Tanwar, Khagesh and Abebe, Mulualem and Ranjan, Rajeev (2016) Relaxor ferroelectricity and electric-field-driven structural transformation in the giant lead-free piezoelectric (Ba,Ca)(Ti, Zr)O-3. In: PHYSICAL REVIEW B, 92 (22).

Braun, Jean-Jacques and Descloitres, Marc and Riotte, Jean and Fleury, Simon and Barbiero, Laurent and Boeglin, Jean-Loup and Violette, Aurelie and Lacarce, Eva and Ruiz, Laurent and Sekhar, M and Kumar, MS Mohan and Subramanian, S and Dupre, Bernard (2009) Regolith mass balance inferred from combined mineralogical, geochemical and geophysical studies: Mule Hole gneissic watershed, South India. In: Geochimica et Cosmochimica Acta, 73 (4). pp. 935-961.

Bravo-León, A and Jiménez-Melendo, M and Rodriǵuez, Domínguez A and Chokshi, AH (1994) The influence of oxygen partial pressure on the creep characteristics of a superplastic 4 mol % yttria partially-stabilized zirconia. In: Journal of Materials Science Letters, 13 (16). pp. 1169-1170.

Bravo-León, Alfonso and Jiménez-Melendo, Manuel and Domínguez-Rodríguez, Arturo and Chokshi, Atul H (1996) The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals. In: Scripta Materialia, 34 (7). pp. 1155-1160.

Brook, CP and Paul, G and Viswanathan, VN and Satyanarayana, S and Panidhara, KM and Larson, BW and Ferguson, AJ and Pal, AJ and Ramamurthy, PC and Strauss, SH and Boltalina, OV and Braunecker, WA (2020) Molecular insights into photostability of fluorinated organic photovoltaic blends: role of fullerene electron affinity and donor-acceptor miscibility. In: Sustainable Energy and Fuels, 4 (11). pp. 5721-5731.

Brook, Colin and Larson, Bryon and Vinila, V and Ramamurthy, Praveen and Paul, Gautam and Boltalina, Olga and Strauss, Steven and Pal, Amlan and Braunecker, Wade (2017) Influence of perfluoroalkylated fullerene acceptors on morphology and photodegradation of organic photovoltaic active layers. In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 254 .

Brown, CA and Surappa, MK (1988) The machinability of a cast aluminium alloy-graphite particle composite. In: Materials Science and Engineering: A, 102 (1). pp. 31-37.

Burley, LG and Beecham-Lonsdale, JH and Srivastava, AK and Collings, IE and Saines, PJ (2021) Enhancing the chemical flexibility of hybrid perovskites by introducing divalent ligands. In: Dalton Transactions, 50 (16). pp. 5437-5441.

Bysakh, S and Mitsuishi, K and Song, M and Furuya, K and Chattopadhyay, K (2004) Transmission electron microscopy and high-resolution transmission electron microscopy study of nanostructure and metastable phase evolution in pulsed-laser-ablation-deposited Ti-Si thin film. In: Journal Of Materials Research, 19 (4). pp. 1118-1125.

Bysakh, Sandip and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2002) Microstructure evolution and metastable phase formation in laser-ablation-deposited films of $Ti_5Si_3$ intermetallic compound. In: Philosophical Magazine A, 82 (6). pp. 1235-1248.

Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) A Study of Nanostructures of Thin Films in B–C–N System Produced by Pulsed Laser Deposition and Nitrogen Ion-Beam-Assisted Pulsed Laser Deposition. In: Journal of Materials Research, 19 (3). pp. 759-767.

Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) The effect of boundaries on the plane Couette flow of granular materials: a bifurcation analysis. In: Journal of Materials Research, 19 (3). pp. 759-767.

Bysakh, S and Das, PK and Chattopadhyay, K (2001) Metastable microstructures in laser ablation deposited aluminium-50 at.% nickel thin films. In: Materials Science and Engineering A, 304-30 . pp. 608-611.

Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.

Bysakh, Sandip and Chattopadhyay, Kamanio and Maiwald, Thorsten and Galun, Rolf and Mordike, Barry L (2004) Microstructure evolution in laser alloyed layer of Cu–Fe–Al–Si on Cu substrate. In: Materials Science and Engineering A, 375-37 . pp. 661-665.

Bysakh, Sandip and Das, PK and Chattopadhyay, K (2001) Evolution of Metastable Microstructures in Laser Ablation Deposited $Ni_{75}Al_{25}$ Thin Films. In: Scripta Materialia, 44 (8-9). pp. 1847-1851.

Bysakh, Sandip and Das, Pushpendu Kumar and Chattopadhyay, Kamanio (2001) Metastable microstructures in laser-ablation-deposited Al–Fe thin films. In: Philosophical Magazine A, 81 (11). pp. 2689-2704.

Bysakh, Sandip and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2003) Evolution of metastable phases during crystallization of pulsed laser deposited amorphous Al–Fe films. In: Journal of Materials Research, 18 (2). pp. 284-295.

Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti(62.5)Si(37.5) thin films during Xe ion irradiation. In: Journal of Materials Research, 26 (1). pp. 62-69.

Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti62.5Si37.5 thin films during Xe ion irradiation. In: Journal of Materials Research, 26 . 62-69 .

C

Cadambi, Sumanth Govindarajan and Jayaram, Vikram (2018) Effect of Humidity on Wear of TiN Coatings: Role of Capillary Condensation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6084-6092.

Cary, Lise and Alexandre, Anne and Meunier, Jean-Dominique and Boeglin, Jean-Loup and Braun, Jean-Jacques (2005) Contribution of phytoliths to the suspended load of biogenic silica in the Nyong basin rivers (Cameroon). In: Biogeochemistry, 74 (1). pp. 101-114.

Castellan, Enzo and Kailas, Satish V and Madayi, Shimjith and Raj, Rishi (2015) Low-Wear High-Friction Behavior of Copper Matrix Composites Dispersed With an In Situ Polymer Derived Ceramic. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 137 (2).

Chaitanya, GVA and Gupta, GS (2023) Gas–Liquid-Particle Interaction in the Lower Part of the Blast Furnace. In: Transactions of the Indian Institute of Metals .

Chaitanya, GVA and Gupta, GS (2023) Liquid flow in heap leaching using the discrete liquid flow model and graph-based void search algorithm. In: Hydrometallurgy, 221 .

Chaitanya, GVA and Gupta, GS (2023) Liquid flow in heap leaching using the discrete liquid flow model and graph-based void search algorithm. In: Hydrometallurgy, 221 .

Chaitanya, GVA and Kamble, S and Lollchund, RM and Gupta, GS and Chen, Z (2020) Modelling of shaft based processes. In: Mineral Processing and Extractive Metallurgy: Transactions of the Institute of Mining and Metallurgy .

Chaitanya, P and Goud, R and Raghavan, R and Ramakrishna, M and Prashanth, KG and Gollapudi, S (2022) Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel. In: Corrosion, 78 (6). pp. 465-472.

Chaitra, K and Thomas, VR and Santosh, MS and Srivastava, C and Nagaraju, N and Kathyayini, H (2015) A Comparative Study on Electrochemical Behaviour of Co3O4 and Co3O4-MWCNTs for Supercapacitors. In: JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 74 (4). pp. 202-208.

Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2015) Computational modeling of reactive hot pressing of zirconium carbide. In: JOURNAL OF MATERIALS RESEARCH, 30 (12). pp. 1876-1886.

Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2014) Effect of Zirconium on the Densification of Reactively Hot-Pressed Zirconium Carbide. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97 (10). pp. 3092-3102.

Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2016) On the Low Temperature Densification of Reactively Hot Pressed Non-Stoichiometric ZrC and (Zr,Ti)C. In: Conference on Advances in Refractory and Reactive Metals and Alloys (ARRMA), JAN 27-29, 2016, Mumbai, INDIA, pp. 3077-3085.

Chakrabarti, Tamoghna and Verma, Nisha and Manna, Sukriti (2017) Grain boundary driven Plateau-Rayleigh instability in multilayer nanocrystalline thin film: A phase-field study. In: MATERIALS & DESIGN, 119 . pp. 425-436.

Chakrabarty, AK and Jacob, KT (2013) Experimental study of phase equilibria in the system Cu-Al-Sn. In: Journal of Phase Equilibria and Diffusion, 34 (4). pp. 267-276.

Chakrabarty, AK and Jacob, KT (2013) Isothermal transformation of beta-phase in Cu-rich Cu-Al-Sn alloys. In: International Journal of Materials Research, 104 (5). pp. 430-441.

Chakraborty, D and Shankar, G and Prajapati, A and Chandra Obul Reddy, BR and Kumar, A (2024) Hot deformation characteristics and microstructural evolution of Ti-900 alloy. In: Materials Letters, 355 .

Chakraborty, J and Ghosh, M and Ranjan, Rajeev and Das, G and Das, D and Chandra, S (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. In: PHILOSOPHICAL MAGAZINE, 93 (36). pp. 4598-4616.

Chakraborty, J and Kumar, Kishor and Ranjan, Rajeev and Chowdhury, Ghosh S and Singh, SR (2011) Thickness-dependent fcc-hcp phase transformation in polycrystalline titanium thin films. In: Acta Materialia, 59 (7). pp. 2615-2623.

Chakraborty, J and Oellers, T and Raghavan, R and Ludwig, A and Dehm, G (2022) Microstructure and residual stress evolution in nanocrystalline Cu-Zr thin films. In: Journal of Alloys and Compounds, 896 .

Chakraborty, S and Patra, N and Mishra, A and Chaterjee, S (2019) Development and characterization of novel piezoceramic material based stack actuator. In: nternational Conference on Advances in Materials and Manufacturing Applications, 29-31 Aug 2019, Bengaluru, pp. 4515-4519.

Chakraborty, S and Tiwary, CS and Kole, AK and Kumbhakar, P and Chattopadhyay, K (2013) A simple method of synthesis and optical properties of Mn doped ZnO nanocups. In: MATERIALS LETTERS, 91 . pp. 379-382.

Chakraborty, S and Tiwary, CS and Kumbhakar, P (2015) Simple chemical aqueous synthesis of dahlia nanoflower consisting of finger-like ZnO nanorods and observation of stable ultraviolet photoluminescence emission. In: JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 78 . pp. 84-89.

Chakraborty, Supriyo and Kumar, Praveen and Choudhury, Abhik (2018) Phase-field modeling of grain-boundary grooving and migration under electric current and thermal gradient. In: ACTA MATERIALIA, 153 . pp. 377-390.

Chakravartty, JK and Banerjee, S and Prasad, YVRK (1992) Superplasticity in ?-zirconium: A study using a processing map. In: Scripta Metallurgica et Materialia, 26 (1). pp. 75-78.

Chakravartty, JK and Banerjee, S and Prasad, YVRK and Asundi, MK (1992) Hot-working characteristics of Zircaloy-2 in the temperature range of 650–950°C. In: Journal of Nuclear Materials, 187 (3). pp. 260-271.

Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1995) Characterization of hot deformation behaviour of Zr---2.5Nb---0.5Cu using processing maps. In: Journal of Nuclear Materials, 218 (2). pp. 247-255.

Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1996) Dynamic recrystallisation during hot working of Zr-2 center dot 5Nb: Characterisation using processing maps. In: Materials Science and Technology, 12 (9). pp. 705-716.

Chakravartty, JK and Kapoor, R and Banerjee, S and Prasad, YVRK (2007) Characterization of hot deformation behavior of Zr-1Nb-1Sn alloy. In: Journal of Nuclear Materials, 362 (1). pp. 75-86.

Chakravartty, JK and Prasad , YVRK and Asundi, MK (1991) Processing map for hot working of alpha-zirconium. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (4). pp. 829-836.

Chakravarty, Dibyendu and Chokshi, Atul H (2014) Direct Characterizing of Densification Mechanisms during Spark Plasma Sintering. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97 (3). pp. 765-771.

Chakravarty, Dibyendu and Chokshi, Atul H (2015) Influence of yttria and zirconia additions on spark plasma sintering of alumina composites. In: JOURNAL OF MATERIALS RESEARCH, 30 (8). pp. 1148-1156.

Chan, JC and Alcock, CB and Jacob, KT (1973) Electrochemical measurement of the oxygen potential of the system iron+alumina+ hercynite in the temperature range 750 to 1600oC. In: Canadian Metallurgical Quarterly, 12 (4). pp. 439-443.

Chanda, S and Maity, R and Saha, S and Dutta, A and Sinha, TP (2021) Double perovskite nanostructured Dy2CoMnO6 an efficient visible-light photocatalysts: synthesis and characterization. In: Journal of Sol-Gel Science and Technology .

Chandra, Sarath D and Avadhani, GS and Kishore, * (1991) Effect of SiC particles on the mechanical properties of glass-phenolic composites. In: Materials Science and Engineering A, 136 (30). pp. 179-182.

Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of SiC particles on compressive strength and fracture features of glass/phenolic composites. In: Scripta Metallurgica et Materialia, 25 (7). pp. 1641-1646.

Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of post-curing on the mechanical properties and fracture features of some glass-phenolic composites. In: Journal of Materials Science Letters, 10 (21). pp. 1263-1266.

Chandrappa, Anjaneya K and Potnuru, Lokeswara R and Ramamurthy, Praveen C (2018) Correlation between structural and electrochemical properties of potassium doped strontium silicates for electrolyte application in intermediate temperature solid oxide fuel cells. In: JOURNAL OF ALLOYS AND COMPOUNDS, 745 . pp. 555-561.

Chandraprabha, MN and Natarajan, KA (2010) Microbially Induced Mineral Beneficiation. In: Mineral Processing and Extractive Metallurgy Review, 31 (1). pp. 1-29.

Chandraprabha, MN and Natarajan, KA (2009) Microbially induced separation of arsenopyrite and bioremediation of arsenic. In: Minerals and Metallurgical Processing, 26 (4). pp. 217-221.

Chandraprabha, MN and Modak, JM and Natarajan, KA (2009) Soft-particle model analysis of effect of LPS on electrophoretic softness of Acidithiobacillus ferrooxidans grown in presence of different metal ions. In: Colloids and Surfaces B: Biointerfaces, 69 (1). pp. 1-7.

Chandraprabha, MN and Modak, JM and Natarajan, KA and Raichur, AM (2002) Strategies for efficient start-up of continuous biooxidation process for refractory gold ores. In: Minerals Engineering, 15 (10). 751-753 .

Chandraprabha, MN and Natarajan, KA (2008) Biomudulation of Sulfide Minerals for Environment-friendly Beneficiation. In: Proceedings of XXIV International Mineral Processing Congress, Beijing (IMPC-2008).

Chandraprabha, MN and Natarajan, KA (2010) Bioremoval of arsenate ions by acidithiobacillus ferrooxidans. In: Journal of Biotechnology, 150 (Suppl.). S220.

Chandraprabha, MN and Natarajan, KA (2013) Role of outer membrane exopolymers of Acidithiobacillus ferrooxidans in adsorption of cells onto pyrite and chalcopyrite. In: INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 123 . pp. 152-157.

Chandraprabha, MN and Natarajan, KA (2006) Surface chemical and flotation behaviour of chalcopyrite and pyrite in the presence of Acidithiobacillus thiooxidans. In: Hydrometallurgy, 83 (1-4). pp. 146-152.

Chandraprabha, MN and Natarajan, KA (2005) Surface chemical characterization of acidithiobacillus ferrooxidans grown in presence of different metal ions. In: Proc. XXIII Int. Mineral Processing Congress, SEP 2006, Istanbul, Turkey.

Chandraprabha, MN and Natarajan, KA and Modak, Jayant M (2004) Selective separation of pyrite and chalcopyrite by biomodulation. In: Colloids and Surfaces B: Biointerfaces, 37 (3-4). pp. 93-100.

Chandraprabha, MN and Natarajan, KA and Somasundaran, P (2004) Selective separation of arsenopyrite from pyrite by biomodulation in the presence of Acidithiobacillus ferrooxidans. In: Journal of Colloid and Interface Science, 276 (2). pp. 323-332.

Chandraprabha, MN and Natarajan, KA and Somasundaran, P (2005) Selective separation of pyrite from chalcopyrite and arsenopyrite by biomodulation using Acidithiobacillus ferrooxidans. In: International Journal of Mineral Processing, 75 (1-2). pp. 113-122.

Chandrasekaran, T (1992) A new approach to the kinetics of size reduction in ball milling. In: Minerals Engineering, 5 (8). 931 -938.

Chandrasekaran, T and Kishore, * (1993) Development of a new wear index in slurry erosion tests on steels. In: Journal of Materials Science Letters, 12 (2). pp. 96-98.

Chandrasekaran, T and Kishore, * (1993) Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel. In: Wear, 161 (1-2). pp. 105-109.

Chandrasekaran, T and Kishore, * (1993) On the roughness dependence of wear of steels: a new approach. In: Journal of Materials Science Letters, 12 (12). pp. 952-954.

Chandrasekaran, T and Natarajan, KA and Kishore, * (1991) Influence of microstructure on the wear of grinding media. In: Wear, 147 (2). 267 -274.

Chandrasekhar, M and Choudhary, A and Khatua, DK and Kumar, P (2021) Enhanced energy storage performance of SrTiO 3 modified Bi0.5Na0.5TiO3â-BaTiO3â-Bi0.5K0.5TiO3 ceramics. In: Journal of Materials Science: Materials in Electronics, 32 (05). pp. 5316-5324.

Chandrasekhar, M and Jayarao, G and Khatua, Dipak Kumar and Kumar, P (2019) Effect of NaNbO3 addition on structure, dielectric and energy storage properties of lead free piezoelectric Bi0.5Na0.5TiO3-K0.5Na0.5NbO3 ceramics. In: CERAMICS INTERNATIONAL, 45 (2, A). pp. 1969-1976.

Chandrasekhar, M and Khatua, Dipak Kumar and Pattanayak, Ranjit and Kumar, P (2017) Dielectric relaxation and conduction mechanism studies of BNT-BT-BKT ceramics. In: JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 111 . pp. 160-166.

Chandrashekara, GK and Murali, MG and Rao, Arun D and Ramamurthy, Praveen C (2017) Influence of thiophene spacer on conjugated polymer for organic photovoltaics. In: 43rd IEEE Photovoltaic Specialists Conference (PVSC), JUN 05-10, 2016, Portland, OR, pp. 1642-1644.

Chandrashekara, GK and Reddy, S and Ramamurthy, PC (2018) Effect of Fluorination on the D-A-D type Hole Transporting Materials for Perovskite Solar Cells. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Chandravanshi, D and Gope, S and Hemaprabha, E and Chattopadhyay, K (2023) Carbon nanofibers with hybrid crystalline-amorphous silicon nanoparticles: high-rate capable lithium-ion battery. In: Journal of Materials Science: Materials in Electronics, 34 (5).

Chaterjee, S and Agrawal, G and Mishra, A and Anwar, S (2018) Electromechanical Properties and Electric Field Induced Strain of BNT-BT Piezoceramic Material at the MPB Region. In: MATERIALS TODAY-PROCEEDINGS, 5 (11, 3). pp. 24880-24886.

Chatterjee, A and Ghosh, A and Mitra, R and Chakrabarti, D (2017) Effect of microstructural boundaries of low-carbon lath martensitic steel in cleavage fracture resistance. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 483-484.

Chatterjee, Dipanwita and Akash, R and Kamalnath, K and Ahmad, Rafia and Singh, Abhishek Kumar and Ravishankar, N (2017) Orientation Selection during Heterogeneous Nucleation: Implications for Heterogeneous Catalysis. In: JOURNAL OF PHYSICAL CHEMISTRY C, 121 (18). pp. 10027-10037.

Chatterjee, Kaushik and Suwas, Satyam and Abinandanan, TA (2022) Guest Editorial: Materials for a Sustainable Future. In: Journal of the Indian Institute of Science . ISSN 0970-4140

Chatterjee, S and Abinandanan, TA and Chattopadhyay, K (2006) Microstructure development during dissimilar welding: Case of laser welding of Ti with Ni involving intermetallic phase formation. In: Journal of Material Science, 41 (3). pp. 643-652.

Chatterjee, S and Abinandanan, TA and Chattopadhyay, K (2008) Phase formation in Ti/Ni dissimilar welds. In: Materials Science and Engineering A, 490 (1-2). pp. 7-15.

Chatterjee, Subhradeep and Abinandanan, TA and Chattopadhyay, Kamanio (2008) Phase-Field Simulation of Fusion Interface Events during Solidification of Dissimilar Welds: Effect of Composition Inhomogeneity. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Chatterjee, Subhradeep and Abinandanan, TA and Reddy, Madhusudhan G and Chattopadhyay, Kamanio (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (2). pp. 769-776.

Chattopadhyay, K (2004) Phases and microstructure evolution through nonequilibrium processing - (The surprises and joys of meandering through the nonequilibrium landscape). In: Transactions Of The Indian Institute of Metals, 57 (1). pp. 1-11.

Chattopadhyay, K and Biswas, K and Bysakh, S and Phanikumar, G and Weisheit, A and Galun, R and Mordike, B (2001) Quasicrystalline coatings through laser processing: a study on process optimisation and microstructure evolution. In: Quasicrystals - Preparation, Properties and Applications. Symposium, 27-30 Nov. 2000, Boston, MA, USA, K15.3.1-K15.3.12.

Chattopadhyay, K (2005) Behaviour of Embedded Metals and Alloys at Small Sizes. In: Transactions of the Indian Institute of Metals, 58 (6). pp. 1057-1067.

Chattopadhyay, K (1992) Nanocomposites by rapid solidification route. In: Bulletin of Materials Science, 15 (6). pp. 515-525.

Chattopadhyay, K (1997) Synthesis and properties of nanodispersed granular materials. In: Materials Science and Engineering A, 226 . pp. 1012-1018.

Chattopadhyay, K (2000) Trends and opportunities in basic research in microgravity materials processing. In: Current Science, 79 (3). pp. 328-334.

Chattopadhyay, K and Aaronson, HI (1986) Interfacial structure and crystallographic studies of transformations in betat' and beta Cu---Zn alloys-II. martensitic formation of alpha1' plates in beta'. In: Acta Metallurgica, 34 (4). pp. 713-720.

Chattopadhyay, K and Bhattacharya, V (2009) Microstructure, shape, stability and melting inembeddednanoparticles. In: Journal of the Indian Institute of Science, 89 (1).

Chattopadhyay, K and Bhattacharya, V and Tsai, AP (2001) Superconductivity of embedded lead nano particles in metallic and amorphous matrices. In: MRS Proceedings, 703 . V13.22.

Chattopadhyay, K and Biswas, K and Bysakh, S and Phanikumar, G and Weisheit, A and Galun, R and Mordike, B (2000) Quasicrystalline Coatings Through Laser Processing: A Study on Process Optimisation and Microstructure Evolution. In: MRS Proceedings, 643 .

Chattopadhyay, K and Goswami, R (1997) Melting and superheating of metals and alloys. In: Progress in Materials Science, 42 (1-4). pp. 287-300.

Chattopadhyay, K and Goswami, R and Nagarajan, R and Bhatia, T and Majumdar, B (1994) Synthesis and properties of nanodispersed alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Chattopadhyay, K and Lele, S and Prasad, R and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) On the variety of electron diffraction patterns from quasicrystals. In: Scripta Metallurgica, 19 (11). pp. 1331-1334.

Chattopadhyay, K and Lele, S and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) Electron Microscopy of Quasi-Crystals and Related Structures. In: Current Science, 54 (18). pp. 895-903.

Chattopadhyay, K and Lele, S and Thangaraj, N and Ranganathan, S (1987) Vacancy ordered phases and one-dimensional quasiperiodicity. In: Acta Metallurgica, 35 (3). pp. 727-733.

Chattopadhyay, K and Mukhopadhyay, NK (1987) The Nature of the Early Stages of Decomposition of Icosahedral Quasicrystals. In: Materials Science Forum, 22-24 . pp. 639-651.

Chattopadhyay, K and Mukhopadhyay, NK (1990) On the origin of banded microstructure in rapidly solidified alloys: The case of Al-10%Mn quasicrystalline system. In: Journal of Crystal Growth, 106 (2-3). pp. 387-392.

Chattopadhyay, K and Nagarajan, R (2023) SYNTHESIS OF NANOCOMPOSITES: SYNTHESIS OF NANOCOMPOSITES BY NONEQUILIBRIUM PROCESSING. [Book Chapter]

Chattopadhyay, K and Ojha, SN and Rao, P. Ramachandra (1985) Phase transformations and metastable phase equilibria in Al-Ge alloy. In: Materials Science and Engineering, 73 (1-2). pp. 177-185.

Chattopadhyay, K and Ranganathan, S (1990) Quasi-Crystals. In: Indian Journal of Technology, 28 (6-8). pp. 394-403.

Chattopadhyay, K and Ranganathan, S and Subbanna, GN and Thangaraj, N (1985) Electron microscopy of quasi-crystals in rapidly solidified Al-14% Mn alloys. In: Scripta Metallurgica, 19 (6). pp. 767-771.

Chattopadhyay, K and Ravi, VA and Ranganathan, S (1986) Non-equilibrium trapping in Al---In system. In: Acta Metallurgica, 34 (4). 691 -693.

Chattopadhyay, K and Ravishankar, N and Abinandanan, TA and Varghese, Viji (2003) Understanding milling induced changes: Some results. In: Journal of Chemical Sciences, 115 (5-6). pp. 727-740.

Chattopadhyay, K and Ravishankar, N and Goswami, R (1997) Shapes of quasicrystals. In: Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 237-249.

Chattopadhyay, K and Sreekumar, K and Sarma, AK and Raviprasad, K (1990) A study of the early stage decomposition behaviour of $Al-Li$ alloys at room temperature. In: Scripta Metallurgica et Materialia, 24 (8). pp. 1495-1500.

Chattopadhyay, K and Swamy, VT and Agarwala, SL (1990) The Solidification Behaviour of Undercooled Al-Cu Alloys in Contact with the Primary Phases. In: Acta Metallurgica et Materialia, 38 (3). pp. 521-531.

Chattopadhyay, K and Swarnamba, PR and Srivastava, JPN (1989) The evolution of microstructure in the undercooled Zn-Sn entrained droplets. In: Metallurgical Transactions A, 20 (10). pp. 2109-2115.

Chattopadhyay, K and Tiwari, MK (1992) Materials processing under microgravity conditions using drop tubes. In: Bulletin of Materials Science, 15 (2). pp. 91-110.

Chattopadhyay, K and Varghese, V (2004) Understanding mechanical energy driven nonequilibrium processing: some results. In: Materials Science and Engineering A, 375-37 . pp. 72-77.

Chattopadhyay, K and Wang, XM and Aoki, K and Masumoto, T (1996) Metastable phase formation during mechanical alloying of Al-Ge and Al-Si alloys. In: Journal of Alloys and Compounds, 232 (1-2). pp. 224-231.

Chattopadhyay, Kamanio (2006) Training Young Minds for Nanoscience and Technology: Issues and Challenges. In: MRS Proceedings, 931 .

Chattopadhyay, Kamanio and Das, Puspendu kumar and Bysakh, Sandip (2002) Microstructure evolution and metastable phase formation in laser-ablation-deposited films of Ti5Si3 intermetallic compound. In: Philosophical Magazine A, 82 (6). pp. 1235-1248.

Chattopadhyay, Soham and Anand, G and Chowdhury, Sandip Ghosh and Manna, Indranil (2018) Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 734 . pp. 139-148.

Chattopadyhay, K and Aoki, K and Masumoto, T (1987) The nature of hydrogen induced amorphization of SmNi2 laves compound. In: Scripta Metallurgica, 21 (3). pp. 365-369.

Chaturvedi, A and Varma, GS and Asokan, S and Ramamurty, U (2020) Physical and mechanical properties of intermediate phase chalcogenide glasses with centroid compositions in the Ge-Te-In-Ag system. In: Journal of Non-Crystalline Solids, 543 (1).

Chaturvedi, A and Varma, GS and Sundararajan, A and Ramamurty, U (2022) Rigidity Transition in Chalcogenide Glasses: Dynamic Nano-Indentation and Diffuse Reflectance Spectroscopic Studies. In: 2022 IEEE International Conference on Emerging Electronics, 11-14 Dec 2022.

Chaudhary, Aakanksha and Nag, Poshit M and Ravishankar, N and Thomas, Tiju and Jain, Manish and Raghavan, Srinivasan (2014) Synergistic Effect of Mo plus Cu Codoping on the Photocatalytic Behavior of Metastable TiO2 Solid Solutions. In: JOURNAL OF PHYSICAL CHEMISTRY C, 118 (51). pp. 29788-29795.

Chaudhary, K and Singh, G and Ramkumar, J and Anantha Ramakrishna, S and Srivastava, KV and Ramamurthy, PC (2020) Optically Transparent Protective Coating for ITO-Coated PET-Based Microwave Metamaterial Absorbers. In: IEEE Transactions on Components, Packaging and Manufacturing Technology, 10 (3). pp. 378-388.

Chaudhuri, A and Behera, AN and Kapoor, R and Sarkar, A and Chakravartty, JK and Suwas, S (2015) Texture evolution during hot deformation of Moly-TZM. In: 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (I, AUG 24-29, 2014, Dresden, GERMANY.

Chaudhuri, Atanu and Behera, Ananta N and Sarkar, Apu and Kapoor, Rajeev and Ray, Ranjit K and Suwas, Satyam (2019) Hot deformation behaviour of Mo-TZM and understanding the restoration processes involved. In: ACTA MATERIALIA, 164 . pp. 153-164.

Chaudhuri, Atanu and Raghupathy, Y and Srinivasan, Dheepa and Suwas, Satyam and Srivastava, Chandan (2017) Microstructural evolution of cold-sprayed Inconel 625 superalloy coatings on low alloy steel substrate. In: ACTA MATERIALIA, 129 . pp. 11-25.

Chaudhuri, Atanu and Sarkar, Apu and Kapoor, Rajeev and Chakravartty, JK and Ray, RK and Suwas, Satyam (2019) Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 28 (1). pp. 448-462.

Chaudhuri, Atanu and Sarkar, Apu and Kapoor, Rajeev and Singh, Ram N and Chakravartty, Jayanta K and Suwas, Satyam (2014) Microstructural Features of Hot Deformed Nb-1Zr-0.1C Alloy. In: JOM, 66 (9). pp. 1923-1929.

Chaudhuri, Atanu and Sarkar, Apu and Suwas, Satyam (2018) Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum. In: INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 73 . pp. 168-182.

Chauhan, A and Yuan, Q and Litvinov, D and Gaganidze, E and Schneider, H-C and Terentyev, D and Aktaa, J (2022) Effect of temperature on the neutron irradiation-induced cavities in tungsten. In: Philosophical Magazine .

Chauhan, PS and Sengupta, R and Kumar, S and Panwar, V and Sahoo, S and Bose, S and Misra, A (2023) Role of graded microstructure and electrolyte distribution in electrochemical capacitance of compressible three-dimensional carbon nanotubes-polymer foam based supercapacitor. In: Electrochimica Acta, 461 .

Chawake, Niraj and Koundinya, NTSN and Kashyap, Sanjay and Srivastav, Ajeet K and Yadav, Devinder and Mondal, RA and Kottada, Ravi Sankar (2016) Formation of amorphous alumina during sintering of nanocrystalline B2 aluminides. In: MATERIALS CHARACTERIZATION, 119 . pp. 186-194.

Chawake, Niraj and Varanasi, Rama Srinivas and Jaswanth, B and Pinto, Linford and Kashyap, Sanjay and Koundinya, NTBN and Srivastav, Ajeet K and Jain, Anshul and Sundararaman, M and Kottada, Ravi Sankar (2016) Evolution of morphology and texture during high energy ball milling of Ni and Ni-5 wt%Cu powders. In: MATERIALS CHARACTERIZATION, 120 . pp. 90-96.

Cheirmadurai, K and Praveenkumar, K and Uvanarayanan, C and Anand, PSP and Manivasagam, G (2024) On the selection and use of biomaterials and implants in orthopedics: A study and evaluation into the future. [Book Chapter]

Chelliah, NM and Singh, H and Surappa, MK (2017) Processing and mechanical properties of in-situ magnesium matrix composites containing nano-sized polymer derived sicno particles. In: 21st International Conference on Composite Materials, ICCM 2017, 20 - 25 August 2017, Xi'an.

Chelliah, Nagaraj M and Kumar, Ram and Singh, Harpreet and Surappa, MK (2017) Microstructural evolution of die-cast and homogenized AZ91 Mg-alloys during dry sliding condition. In: Journal of Magnesium and Alloys, 5 (1). pp. 35-40. ISSN 22139567

Chelliah, Nagaraj M and Padaikathan, Pambannan and Kumar, Ram (2019) Evaluation of electrochemical impedance and biocorrosion characteristics of as-cast and T4 heat treated AZ91 Mg-alloys in Ringer's solution. In: Journal of Magnesium and Alloys, 7 (1). pp. 134-143.

Chelliah, Nagaraj M and Padaikathan, Pambannan and Surappa, M K (2018) Deformation mechanisms and texture evolution of in-situ magnesium matrix composites containing polymer derived SiCNO dispersoids during hot compression. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 720 . pp. 49-59.

Chelliah, Nagaraj M and Saxena, Alaukik and Sharma, Khushdeep and Singh, Harpreet and Surappa, MK (2017) Surface characterization of nanoporous aluminium oxide films synthesized by single-step DC and AC anodization. In: Surfaces and Interfaces, 7 . pp. 139-145. ISSN 24680230

Chelliah, Nagaraj M and Singh, Harpreet and Raj, Rishi and Surappa, M K (2017) Processing, microstructural evolution and strength properties of in-situ magnesium matrix composites containing nano-sized polymer derived SiCNO particles. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 685 . pp. 429-438.

Chelliah, Nagaraj M and Singh, Harpreet and Surappa, MK (2017) Microstructural evolution and strengthening behavior in in-situ magnesium matrix composites fabricated by solidification processing. In: Materials Chemistry and Physics, 194 . pp. 65-76. ISSN 02540584

Chelliah, Nagaraj M and Sudarshan, Sudarshan and Kraemer, Lisa and Singh, Harpreet and Surappa, MK and Raj, Rishi (2017) Stress–rupture measurements of cast magnesium strengthened by in-situ production of ceramic particles. In: Journal of Magnesium and Alloys, 5 (2). pp. 225-230. ISSN 22139567

Chen, N and Louzguine, DV and Ranganathan, S and Inoue, A (2005) Formation ranges of icosahedral, amorphous and crystalline phases in rapidly solidified Ti-Zr-Hf-Ni alloys. In: Acta Materialia, 53 (3). pp. 759-764.

Chen, N and Louzguine-Luzgin, DV and Kubota, T and Ranganathan, S and Inoue, A (2005) Formation of amorphous and icosahedral phases in Ti-Zr-Hf-LTM (LTM =Ni, Pd or Pt) alloys. In: Scripta Materialia, 53 (2). pp. 213-216.

Chen, N and Louzguine-Luzgin, DV and Ranganathan, S and Inoue, A (2005) Glassy and icosahedral phases in rapidly solidified Ti-Zr-Hf-(Fe, Co orNi) alloys. In: Journal of Non-crystalline Solids, 351 (30-32). pp. 2547-2551.

Chen, N and Yao, Kefu and Louzguine-Luzgin, DV and Qiu, Shengbao and Ranganathan, S and Inoue, A (2007) Phase transformations in the rapidly solidified Ti40Zr20Hf20Pd20 alloy. In: Scripta Materialia, 57 (7). pp. 631-634.

Cherukupally, N and Divya, M and Dasgupta, S (2020) A Comparative Study on Printable Solid Electrolytes toward Ultrahigh Current and Environmentally Stable Thin Film Transistors. In: Advanced Electronic Materials . (In Press)

Chetankumar, K and Swamy, BEK and Naik, TSSK (2020) Electrochemical sensing of catechol in presence of hydroquinone using a carbon paste electrode amplified with poly (vanillin). In: Chemical Data Collections, 28 .

Chetankumar, K and Swamy, BEK and Naik, TSSK (2020) A reliable electrochemical sensor for detection of catechol and hydroquinone at MgO/GO modified carbon paste electrode. In: Journal of Materials Science: Materials in Electronics . (In Press)

Chethan, B and Prasad, V and Sunil Kumar, A and Thomas, S and Rupashree, MP (2024) Fabrication of surfactant-based electrochemical sensors and biosensors for analysis of textile dyes. [Book Chapter]

Chetty, R and Bali, A and Femi, OE and Chattopadhyay, K and Mallik, RC (2016) Thermoelectric Properties of In-Doped Cu2ZnGeSe4. In: JOURNAL OF ELECTRONIC MATERIALS, 45 (3). pp. 1625-1632.

Chetty, R and Bali, A and Naik, MH and Rogl, G and Rogl, P and Jain, M and Suwas, S and Mallik, RC (2015) Thermoelectric properties of Co substituted synthetic tetrahedrite. In: ACTA MATERIALIA, 100 . pp. 266-274.

Chinnasamy, CN and Narayanasamy, A and Chattopadhyay, K and Ponpandian, N (1999) Magnetic properties of mechanically alloyed nanocrystalline Ni3Fe. In: Nanostructured Materials, 12 (5-8). pp. 951-954.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K (2001) The influence of Fe3+ ions at tetrahedral sites on the magnetic properties of nanocrystalline ZnFe2O4. In: Materials Science and Engineering: A, 304-6 . pp. 983-987.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Guerault, H and Greneche, JM (2001) Ferrimagnetic Ordering In Nanostructured Zinc Ferrite. In: Scripta Materialia, 44 (8-9). pp. 1407-1410.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Guerault, H and Greneche, JM (2000) Magnetic properties of nanostructured ferrimagnetic zinc ferrite. In: Journal of Physics: Condensed Matter, 12 (35). pp. 7795-7805.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Saravanakumar, M (2001) Order–disorder studies and magnetic properties of mechanically alloyed nanocrystalline Ni3Fe alloy. In: Materials Science and Engineering A, 304 (Sp. Is). pp. 408-412.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Joseyphus, Justin R and Chattopadhyay, K and Shinoda, B and Jeyadevan, B and Tohji, K and Nakatsuka, K and Greneche, JM (2001) Ferrimagnetic ordering in nanostructured CdFe2O4 spinel. In: Journal Of Applied Physics, 90 (1). pp. 527-529.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Joseyphus, RJ and Jeyadevan, B and Tohji, K and Chattopadhyay, K (2002) Grain size effect on the Neel temperature and magnetic properties of nanocrystalline $NiFe{_2}O{_4}$ spinel. In: Journal of Magnetism and Magnetic Materials, 238 (2-3). pp. 281-287.

Chirranjeevi, BG and Abinandanan, TA and Gururajan, MP (2009) A phase field study of morphological instabilities in multilayer thin films. In: Acta Materialia, 57 (4). pp. 1060-1067.

Chitara, Basant and Jebakumar, DS Ivan and Rao, CNR and Krupanidhi, SB (2009) Negative differential resistance in GaN nanocrystals above room temperature. In: Nanotechnology, 20 (40). pp. 1-4.

Chithra, S and Lele, S and Chattopadhyay, K (2011) Structure evolution and phase change in Ag-5.1 at.% Bi alloy during mechanical alloying. In: Acta Materialia, 59 (5). pp. 2009-2019.

Chithra, S and Malviya, KD and Chattopadhyay, K (2014) Structural Evolution and Phase Stability of Hume-Rothery Phase in a Mechanically Driven Nanostructured Ag-15 at. pct Sn Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (3). pp. 1148-1160.

Chitralekha, J and Raviprasad, K and Gopal, ESR and Chattopadhyay, K (1995) Formation of metastable p phase in mechanically alloyed tellurium-rich Ag–Te alloys. In: Journal of Materials Research, 10 (8). pp. 1897-1904.

Chitralekha, J and Gopal, ESR and Chattopadhyay, K (1997) Studies on elemental tellurium under high pressure. In: Journal of Materials Science, 32 (8). pp. 2177-2180.

Chitralekha, J and Srinivasan, A and Chattopadhyay, K and Gopal, ESR (1996) Influence of the Mechanical and Chemical Thresholds on the Microhardness of Ternary Chalcogenide Glasses. In: Physica Status Solidi B, 197 (2). pp. 343-348.

Chockalingam, E and Subramanian, S and Braun, JJ (2008) Bioremediation of acid mine water using rice husk and tree bark. In: Proceedings of the XXIV International Mineral Processing Congress, 2008, Beijing, China.

Chockalingam, Evvie and Sivapriya, K and Subramanian, S and Chandrasekaran, S (2005) Rice husk filtrate as a nutrient medium for the growth of Desulfotomaculum nigrificans: characterisation and sulfate reduction studies. In: Bioresource Technology, 96 (17). pp. 1880-1888.

Chockalingam, Evvie and Sivapriya, K and Subramanian, S and Chandrasekaran, Srinivasan (2005) Rice husk filtrate as a nutrient medium for the growth of Desulfotomaculum nigrificans: characterisation and sulfate reduction studies. In: Bioresource Technology, 96 (17). pp. 1880-1888.

Chockalingam, Evvie and Subramanian, S (2006) Studies on removal of metal ions and sulphate reduction using rice husk and Desulfotomaculum nigrificans with reference to remediation of acid mine drainage. In: Chemosphere, 62 (5). pp. 699-708.

Chockalingam, Evvie and Subramanian, S (2009) Utility of Eucalyptus tereticornis (Smith) bark and Desulfotomaculum nigrificans for the remediation of acid mine drainage. In: Bioresource Technology, 100 (2). pp. 615-621.

Chockalingam, Evvie and Subramanian, S and Natarajan, KA (2003) Studies on biodegradation of organic flotation collectors using Bacillus polymyxa. In: Hydrometallurgy, 71 (1-2). pp. 249-256.

Choi, In-Chul and Kim, Yong-Jae and Wang, Morris Y and Ramamurty, Upadrasta and Jang, Jae-il (2013) Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume. In: Acta Materialia, 61 (19). pp. 7313-7323.

Choi, In-Chul and Zhao, Yakai and Kim, Yong-Jae and Yoo, Byung-Gil and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Indentation size effect and shear transformation zone size in a bulk metallic glass in two different structural states. In: ACTA MATERIALIA, 60 (19). pp. 6862-6868.

Choi, In-Chul and Zhao, Yakai and Yoo, Byung-Gil and Kim, Yong-Jae and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Estimation of the shear transformation zone size fin a bulk metallic glass through statistical a analysis of the first pop-in stresses during spherical nanoindentation. In: SCRIPTA MATERIALIA, 66 (11). pp. 923-926.

Chokshi, AH (2000) Superplastic ceramics. In: Creep, Fatigue and Creep-Fatigue Interaction, 20-22 Jan. 1999, Kalpakkam, India, pp. 129-134.

Chokshi, AH (1999) The role of interfaces in the high temperature deformation and failure of polycrystalline alumina. In: Towards Innovation in Superplasticity II. 2nd International Conference, 21-24 Sept. 1998, Kobe City, Japan, pp. 387-394.

Chokshi, AH and Kottada, RS (2005) The deformation characteristics of nanocrystalline metals. In: Transactions of the Indian Institute of Metals, 58 (6). pp. 939-950.

Chokshi, Atul H (2008) Microstructural stability and creep in nanocrystals. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation, AUG 18-22, 2008, Goslar.

Chokshi, Atul H (1998) Superplasticity in zirconia-based ceramics. In: TMS Annual Meeting on Superplasticity and Superplastic Forming, 16-19 Feb. 1998, San Antonio, TX, USA, pp. 257-265.

Chokshi, Atul H (1996) The influence of grain size on cavitation in superplasticity. In: International Symposium Towards Innovation in Superplasticity, 23-24 July, Kyoto, Japan, Vol.233-234, 89-108.

Chokshi, AH (1999) Diffusion creep in ceramics. In: Proceedings of Creep Behavior of Advanced Materials for the 21st Century. TMS Annual Meeting, 28 Feb.-4 March 1999, San Deigo, CA, USA, pp. 461-470.

Chokshi, AH (2003) The influence of grain size on deformation of copper. In: Materials Science Forum, 426-4 . 4393-4398 .

Chokshi, AH and Yoshida, H and Ikuhara, Y and Sakuma, T (2003) The influence of trace elements on grain boundary processes in yttria-stabilized tetragonal zirconia. In: Materials Letters, 57 (26-27). pp. 4196-4201.

Chokshi, Atul H (1996) An Analysis of Creep Deformation in Nanocrystalline Materials. In: Scripta Materialia, 34 (12). pp. 1905-1910.

Chokshi, Atul H (2010) Bt brinjal: premature approval for cultivation. In: Current Science, 98 (6). p. 734.

Chokshi, Atul H (2005) Cavity nucleation and growth in superplasticity. In: Materials Science and Engineering: A, 410 . pp. 95-99.

Chokshi, Atul H (2008) Diffusion creep in metals and ceramics: Extension to nanocrystals. In: Materials Science and Engineering: A, 483-48 . pp. 485-491.

Chokshi, Atul H (2002) Diffusion creep in oxide ceramics. In: Journal of the European Ceramic Society, 22 (14-15). pp. 2469-2478.

Chokshi, Atul H (2003) Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia. In: Scripta Materialia, 48 (6). pp. 791-796.

Chokshi, Atul H (2019) Grain Boundary Processes in Strengthening, Weakening, and Superplasticity. In: ADVANCED ENGINEERING MATERIALS .

Chokshi, Atul H (2018) High temperature deformation in fine grained high entropy alloys. In: MATERIALS CHEMISTRY AND PHYSICS, 210 (SI). pp. 152-161.

Chokshi, Atul H (2001) On the emergence of new surface grains during superplastic deformation. In: Scripta Materialia, 44 (11). pp. 2611-2615.

Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 Mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.

Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.

Chokshi, Atul H (2008) Triple junction limited grain growth in nanomaterials. In: Scripta Materialia, 59 (7). pp. 726-729.

Chokshi, Atul H (2009) Unusual stress and grain size dependence for creep in nanocrystalline materials. In: Scripta Materialia, 61 (1). pp. 96-99.

Chokshi, Atul H (2012) What is really real? In: Current Science, 102 (3). pp. 389-393.

Chokshi, Atul H (1997) A comparative examination of superplastic flow and fracture in metals and ceramics. In: Materials Science and Engineering A, 234-23 . pp. 986-990.

Chokshi, Atul H and Langdon, Terence G (1996) A Model Study of Cavity Growth in Superplasticity Using Single Premachined Holes. In: Metallurgical and Materials Transactions A, 27A (9). pp. 2532-2539.

Chollacoop, N and Ramamurty, U (2010) Three-Dimensional simulation of deformation fields underneath vickers indenter:Effects of power-law Plasticity. In: Symposium on Mechanical Behavior of Micro- and Nano-Scale System held at the ICMAT 2009, JUN 28-JUL 03, 2009, Singapore.

Chollacoop, N and Ramamurty, U (2005) Experimental assessment of the representative strains in instrumented sharp indentation. In: Scripta Materialia, 53 (2). pp. 247-251.

Choudhary, HK and Kumar, R and Pawar, SP and Bose, S and Sahoo, B (2020) Effect of Microstructure and Magnetic Properties of Ba-Pb-Hexaferrite Particles on EMI Shielding Behavior of Ba-Pb-Hexaferrite-Polyaniline-Wax Nanocomposites. In: Journal of Electronic Materials, 49 (3). pp. 1618-1629.

Choudhary, Harish K and Pawar, Shital P and Kumar, Rajeev and Anupama, AV and Bose, Suryasarathi and Sahoo, Balaram (2017) Mechanistic Insight into the Critical Concentration of Barium Hexaferrite and the Conductive Polymeric Phase with Respect to Synergistically Electromagnetic Interference (EMI) Shielding. In: ChemistrySelect, 2 (2). pp. 830-841. ISSN 23656549

Choudhary, Harish Kumar and Kumar, Rajeev and Pawar, Shital Patangrao and Anupama, AV and Bose, Suryasarathi and Sahoo, Balaram (2018) Effect of Coral-Shaped Yttrium Iron Garnet Particles on the EMI Shielding Behaviour of Yttrium Iron Garnet-Polyaniline-Wax Composites. In: CHEMISTRYSELECT, 3 (7). pp. 2120-2130.

Choudhary, Harish Kumar and Pawar, Shital Patangrao and Bose, Suryasarathi and Sahoo, Balaram (2018) EMI Shielding performance of Lead Hexaferrite/Polyaniline Composite in 8-18 GHz Frequency Range. In: 2nd International Conference on Condensed Matter and Applied Physics (ICC), NOV 24-25, 2017, Bikaner, INDIA.

Choudhury, Samrat and Gandhi, Ashutosh S and Jayaram, Vikram (2003) Bulk, Dense, Nanocrystalline Yttrium Aluminum Garnet by Consolidation of Amorphous Powders at Low Temperatures and High Pressures. In: Journal of the American Ceramic Society, 86 (2). pp. 247-251.

Choudhury, A (2017) Phase-Field Modeling as a Method Relevant for Modeling Phase Transformation During Interdiffusion. [Book Chapter]

Choudhury, Abhik (2015) Pattern-Formation During Self-organization in Three-Phase Eutectic Solidification. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 68 (6). pp. 1137-1143.

Choudhury, Abhik (2017) Phase-Field Modeling as a Method Relevant for Modeling Phase Transformation During Interdiffusion. [Book Chapter]

Choudhury, Abhik and Kellner, Michael and Nestler, Britta (2015) A method for coupling the phase-field model based on a grand-potential formalism to thermodynamic databases. In: CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 19 (5). pp. 287-300.

Choudhury, Abhik and Mukherjee, Rajdip and Bhattacharyya, Saswata (2016) Phase-Field Methods for Pattern-Formation. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 96 (3). II.

Choudhury, Abhik and Yabansu, Yuksel C and Kalidindi, Surya R and Dennstedt, Anne (2016) Quantification and classification of microstructures in ternary eutectic alloys using 2-point spatial correlations and principal component analyses. In: ACTA MATERIALIA, 110 . pp. 131-141.

Choudhury, S and Asthana, S and Homer-Vanniasinkam, S and Chatterjee, K (2022) Emerging trends in biliary stents: a materials and manufacturing perspective. In: Biomaterials Science, 10 (14). pp. 3716-3729.

Choudhury, S and Joshi, A and Agrawal, A and Nain, A and Bagde, A and Patel, A and Syed, ZQ and Asthana, S and Chatterjee, K (2024) NIR-Responsive Deployable and Self-Fitting 4D-Printed Bone Tissue Scaffold. In: ACS Applied Materials and Interfaces .

Choudhury, S and Joshi, A and Baghel, VS and Ananthasuresh, GK and Asthana, S and Homer-Vanniasinkam, S and Chatterjee, K (2024) Design-encoded dual shape-morphing and shape-memory in 4D printed polymer parts toward cellularized vascular grafts. In: Journal of Materials Chemistry B .

Chourasia, NK and Singh, AK and Rai, S and Sharma, A and Chakrabarti, P and Srivastava, A and Pal, BN (2020) A Lithography-Free Fabrication of Low-Operating Voltage-Driven, Very Large Channel Length Graphene Field-Effect Transistor with NH3Sensing Application. In: IEEE Transactions on Electron Devices, 67 (10). pp. 4385-4391.

Chowde Gowda, C and Chandravanshi, D and Tromer, RM and Malya, A and Chattopadhyay, K and Galvão, DS and Tiwary, CS (2024) Tuning the band gap of manganese telluride quantum dots (MnTe QDs) for photocatalysis. In: Applied Physics A: Materials Science and Processing, 130 (5).

Chowde Gowda, C and Mathur, A and Parui, A and Kumbhakar, P and Pandey, P and Sharma, S and Chandra, A and Singh, AK and Halder, A and Tiwary, CS (2022) Understanding the electrocatalysis OER and ORR activity of ultrathin spinel Mn3O4. In: Journal of Industrial and Engineering Chemistry, 113 . pp. 153-160.

Chowdhury, S and Jain, N and Waidi, YO and Barua, R and Das, S and Prasad, A and Datta, S (2024) Biological Smart Biomaterials: Materials for Biomedical Applications. [Book Chapter]

Chowdhury, S and Jana, A and Rawat, R and Yadav, P and Islam, R and Xue, F and Mandal, AK and Sarkar, S and Mishra, R and Venkatesh, R and Phase, DM and Choudhary, RJ (2024) High-temperature insulating ferromagnetic state in charge-disproportionated and spin-state-disproportionated strained SrCoO2.5 thin film. In: APL Materials, 12 (5).

Choyal, V and Sagar, N and Sai Gautam, G (2024) Constructing and Evaluating Machine-Learned Interatomic Potentials for Li-Based Disordered Rocksalts. In: Journal of Chemical Theory and Computation, 20 (11). 4844 - 4856.

Ciobanu, RC and Damian, RF and Schreiner, CM and Aradoaei, M and Sover, A and Raichur, AM (2023) Simulation of Dielectric Properties of Nanocomposites with Non-Uniform Filler Distribution. In: Polymers, 15 (7).

D

Dahilstedt, A and Ramanachalam, MS and Jacob, KT and Seetaraman, S (1993) Matched thermochemical diagram for vacuum decarburization of ferroalloys. In: Scandinavian Journal of Metallurgy, 22 (1). pp. 17-23.

Dahlstedt, A and Seetharaman, S and Jacob, KT (1992) Thermodynamics of salt roasting of sulphide ores. In: Scandinavian Journal of Metallurgy, 21 (6). pp. 242-245.

Dammu, S and Singh, AP and Lala, SRF and Srivastava, C (2023) Grain Boundary Engineering in Electrodeposited Tin-Carbon Nanotube Composite Coatings for Enhanced Corrosion Resistance Performance. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Dan, A and Soum-Glaude, A and Carling-Plaza, A and Ho, CK and Chattopadhyay, K and Barshilia, HC and Basu, B (2019) Temperature- And Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber. In: ACS Applied Energy Materials, 2 (8). pp. 5557-5567.

Dan, Atasi and Barshilia, Harish C and Chattopadhyay, Kamanio and Basu, Bikramjit (2017) Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: A critical. In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 79 . pp. 1050-1077.

Dan, Atasi and Barshilia, Harish C and Chattopadhyay, Kamanio and Basu, Bikramjit (2017) Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: A critical review. In: Renewable and Sustainable Energy Reviews, 79 . pp. 1050-1077. ISSN 13640321

Dan, Atasi and Biswas, Arup and Sarkar, Piyali and Kashyap, Sanjay and Chattopadhyay, Kamanio and Barshilia, Harish C and Basu, Bikramjit (2018) Enhancing spectrally selective response of W/WAl/WAlON/Al2O3 - Based nanostructured multilayer absorber coating through graded optical constants. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 176 . pp. 157-166.

Dan, Atasi and Chattopadhyay, Kamanio and Barshilia, Harish C and Basu, Bikramjit (2016) Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 997-1002.

Dan, Atasi and Chattopadhyay, Kamanio and Barshilia, Harish C and Basu, Bikramjit (2016) Colored selective absorber coating with excellent durability. In: THIN SOLID FILMS, 620 . pp. 17-22.

Dan, Atasi and Jyothi, J and Chattopadhyay, Kamanio and Barshilia, Harish C and Basu, Bikramjit (2016) Spectrally selective absorber coating of WAlN/WAlON/Al2O3 for solar thermal applications. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 157 . pp. 716-726.

Dandekar, TR and Khatirkar, RK and Gupta, A and Bibhanshu, N and Bhadauria, A and Suwas, S (2021) Strain rate sensitivity behaviour of Fe�21Cr-1.5Ni�5Mn alloy and its constitutive modelling. In: Materials Chemistry and Physics, 271 .

Dandekar, TR and Khatirkar, RK and Mahadule, D and Chavhan, J and Kumar, D (2022) Aging phenomenon in low molybdenum Fe-21Cr-5Mn-1.5Ni alloy: Microstructure evolution, texture development and corrosion behavior. In: Materials Today Communications, 33 .

Dandekar, TR and Kumar, A and Khatirkar, RK and Kumar, D and Suwas, S (2023) Effect of microstructure and texture on the evolution of mechanical properties in a cold rolled and annealed UNS S32101 lean duplex stainless steel sheet. In: Materials Chemistry and Physics, 299 .

Dandekar, TR and Kumar, A and Khatirkar, RK and Singh, J and Kumar, D (2021) Effect of isothermal aging at 750 °C on microstructure and mechanical properties of UNS S32101 lean duplex stainless steel. In: Materials Today Communications, 29 .

Darshan, GH and Shyamkumar, V (2023) Regenerated silk sericin from Antheraea mylitta and Bombyx mori, the potential biomaterial. [Book Chapter]

Das, A and Mishra, AK (1996) Role of Thiobacillus ferrooxidans and sulphur (sulphide)-dependent ferric-ion-reducing activity in the oxidation of sulphide minerals. In: Applied Microbiology and Biotechnology, 45 (3). pp. 377-382.

Das, A and Rao, Hanumantha K and Sharma, P and Natarajan, KA and Forssberg, KSE (1999) Surface chemical and adsorption studies using Thiobacillus ferrooxidans with reference to bacterial adhesion to sulfide minerals. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Das, Amitabha and Modak, Jayant M and Natarajan, KA (1998) Surface chemical studies of Thiobacillus ferrooxidans with reference to copper tolerance. In: Antonie van Leeuwenhoek, 73 (03). pp. 215-222.

Das, Barun and Prasad, K Eswar and Ramamurty, U and Rao, CNR (2009) Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene. In: Nanotechnology, 20 (12). pp. 125705-125710.

Das, Chandasree and Kiran, MSRN and Ramamurty, U and Asokan, S (2012) Manifestation of intermediate phase in mechanical properties: Nano-indentation studies on Ge-Te-Si bulk chalcogenide glasses. In: SOLID STATE COMMUNICATIONS, 152 (24). pp. 2181-2184.

Das, Debanjan and Das, Abhinaba and Reghunath, Meera and Nanda, Karuna Kar (2017) Phosphine-free avenue to Co2P nanoparticle encapsulated N,P co-doped CNTs: a novel non-enzymatic glucose sensor and an efficient electrocatalyst for oxygen evolution reaction. In: GREEN CHEMISTRY, 19 (5). pp. 1327-1335.

Das, Debanjan and Nanda, Karuna Kar (2016) One-step, integrated fabrication of Co2P nanoparticles encapsulated N, P dual-doped CNTs for highly advanced total water splitting. In: NANO ENERGY, 30 . pp. 303-311.

Das, KK and Pradip, * and Natarajan, KA (1997) The effect of constituent metal ions on the electrokinetics of chalcopyrite. In: Journal of Colloid and Interface Science, 196 (1). pp. 1-11.

Das, Kaushik and Karthik, C and Varma, KBR and Ramamurty, U (2008) Nano- and micro-indentation studies on lithium borate-barium bismuth niobate glasses. In: Journal of Non-Crystalline Solids, 354 (32). pp. 3793-3798.

Das, Lopamudra and Naskar, Sukla and Sarkar, Tandra and Maiti, Ashok Kumar and Das, Soumen and Chatterjee, Jyotirmoy (2018) Immunohistochemical evaluation of prime molecules in cervical lesions towards assessment of malignant potentiality. In: JOURNAL OF CANCER RESEARCH AND THERAPEUTICS, 14 (2). pp. 377-381.

Das, Manasmita and Dhak, Prasanta and Gupta, Satyajit and Mishra, Debasish and Maiti, Tapas K and Basak, Amit and Pramanik, Panchanan (2010) Highly biocompatible and water-dispersible, amine functionalized magnetite nanoparticles, prepared by a low temperature, air-assisted polyol process: a new platform for bio-separation and diagnostics. In: Nanotechnology, 21 (12).

Das, NK and Mishra, DK and Naik, PK and Dehury, P and Bose, S and Banerjee, T (2023) Dihydrolevoglycosenone as a novel bio-based nanofluid for thermal energy storage: Physiochemical and quantum chemical insights. In: Journal of Energy Storage, 59 .

Das, NK and Santra, S and Naik, PK and Vasa, MS and Raj, R and Bose, S and Banerjee, T (2022) Evaluation of Thermophysical Properties and Thermal Performance of Amine-Functionalized Graphene Oxide/Deep Eutectic Solvent Nanofluids as Heat-Transfer Media for Desalination Systems. In: ACS Sustainable Chemistry and Engineering, 11 (14). pp. 5376-5389.

Das, P (2023) Effect of Melt Treatment on Microstructure Evolution and Coarsening Mechanism of A356 Al Alloy During Cooling Slope Rheoprocessing. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .

Das, P (2022) Effect of process variables and melt treatment conditions during cooling slope semi solid slurry generation process of Al-7Si-0.3 Mg alloy. In: Materials Today Communications, 33 .

Das, P (2023) Isothermal coarsening of cooling slope processed semi-solid A380 Al alloy slurry. In: International Journal of Cast Metals Research, 36 (4-6). 162 -184.

Das, P (2022) Microstructural Morphology and Mechanical Properties of Cooling Slope Rheocast A380 Al Alloy. In: Journal of Materials Engineering and Performance .

Das, P (2022) Microstructure Evolution During Rheoprocessing of A356 Al Alloy Using Cooling Slope. In: International Journal of Metalcasting .

Das, P (2023) Microstructure Evolution during Cooling Slope Rheoprocessing of Novel Al-15Mg2Si-4.5Si Composite. In: Solid State Phenomena, 347 . pp. 121-126.

Das, P (2022) Microstructure and Mechanical Properties of Cooling Slope Rheocast Al-7Si-0.3Mg Alloy and Development of a Rheo Pressure Die Cast Knuckle Housing. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 54 (1). 395- 424.

Das, P (2023) Multiphase Flow Simulation and Experimental Validation of Cooling Slope Rheoprocessing of A380 Alloy. In: International Journal of Metalcasting .

Das, P (2023) Optimisation of melt pouring temperature and low superheat casting of Al-15Mg2Si-4.5Si composite. In: International Journal of Cast Metals Research, 36 (1-3). pp. 76-89.

Das, P (2022) Primary Phase Morphology of Cooling Slope-Processed A356 Al Alloy and Its Effect on Rheological Properties. In: International Journal of Metalcasting .

Das, P and Sultan, MA (2023) Effect of Strontium Addition on Semi-Solid Slurry Generation of Novel Al�15Mg2Si�4.5Si Composite During Cooling Slope Rheoprocessing. In: Transactions of the Indian Institute of Metals .

Das, S and Roy, D (2021) A poroviscoelasticity model based on effective temperature for water and temperature driven phase transition in hydrogels. In: International Journal of Mechanical Sciences, 196 .

Das, SM and Singh, MP and Chattopadhyay, K (2020) Effect of Cr addition on the evolution of protective alumina scales and the oxidation properties of a Ta stabilized γ'-strengthened Co-Ni-Al-Mo-Ta-Ti alloy. In: Corrosion Science, 172 .

Das, Sarmistha and Varalakshmi, K and Jayaram, V. and Biswas, SK (2007) Ultra Mild Wear in Lubricated Tribology of an Aluminium Alloy. In: Journal of Tribology, 129 (4). pp. 942-951.

Das, Saurabh Mohan and Singh, Mahander Pratap and Chattopadhyay, Kamanio (2019) Evolution of oxides and their microstructures at 800 degrees C in a gamma-gamma ` stabilised Co-Ni-Al-Mo-Ta superalloy. In: CORROSION SCIENCE, 155 . pp. 46-54.

Das, Sayan and Chetty, Raju and Wojciechowski, Krzysztof and Suwas, Satyam and Mallik, Ramesh Chandra (2017) Thermoelectric properties of Sn doped BiCuSeO. In: APPLIED SURFACE SCIENCE, 418 (A). pp. 238-245.

Das, Sayan and Valiyaveettil, Suneesh Meledath and Chen, Kuei-Hsien and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Thermoelectric properties of Mn doped BiCuSeO. In: MATERIALS RESEARCH EXPRESS, 6 (8).

Das, Sayan and Valiyaveettil, Suneesh Meledath and Chen, Kuei-Hsien and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Thermoelectric properties of Pb and Na dual doped BiCuSeO. In: AIP ADVANCES, 9 (1).

Das Adhikary, G and Dwij, V and Senyshyn, A and Sathe, V and Ranjan, R (2021) Large nonlinear electrostrain and piezoelectric response in nonergodic (Na, K)0.5Bi0.5Ti O3: Synergy of structural disorder and tetragonal phase in proximity to a morphotropic phase boundary. In: Physical Review Materials, 5 (6).

Das Adhikary, G and Jafo Muleta, G and Abebe Tina, G and Sharma, D and Mahale, B and Da Silva, LL and Hinterstein, M and Senyshyn, A and Ranjan, R (2023) Structural insights into electric field induced polarization and strain responses in K0.5Na0.5Nb O3 modified morphotropic phase boundary compositions of Na0.5Bi0.5Ti O3 -based lead-free piezoelectrics. In: Physical Review B, 107 (13).

Das Adhikary, G and Mahale, B and Rao, BN and Senyshyn, A and Ranjan, R (2021) Depoling phenomena in Na0.5Bi0.5TiO3-BaTiO3: A structural perspective. In: Physical Review B, 103 (18).

Das Adhikary, G and Sharma, D and Punetha, P and Jafo, G and Abebe, G and Mishra, A and Senyshyn, A and Ranjan, R (2021) Preponderant influence of disordered P4bm phase on the piezoelectricity of critical compositions of Na0.5Bi0.5TiO3 -based ferroelectrics. In: Physical Review B, 104 (18).

Das Adhikary, Gobinda and Khatua, Dipak Kumar and Mishra, Anupam and De, Arnab and Kumar, Naveen and Saha, Sujoy and Shankar, Uma and Senyshyn, Anatoliy and Rao, Badari Narayana and Ranjan, Rajeev (2019) Increasing intervention of nonferroelectric distortion and weakening of ferroelectricity at the morphotropic phase boundary in Na0.5Bi0.5TiO3-BaTiO3. In: PHYSICAL REVIEW B, 100 (13).

Das Adhikary, Gobinda and Khatua, Dipak Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2019) Long-period structural modulation on the global length scale as the characteristic feature of the morphotropic phase boundaries in the Na0.5Bi0.5TiO3 based lead-free piezoelectrics. In: ACTA MATERIALIA, 164 . pp. 749-760.

Das Adhikary, Gobinda and Khatua, Dipak Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2019) Random lattice strain and its relaxation towards the morphotropic phase boundary of Na0.5Bi0.5TiO3-based piezoelectrics: Impact on the structural and ferroelectric properties. In: PHYSICAL REVIEW B, 99 (17).

Das Adhikary, Gobinda and Khatua, Dipak Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2019) Random lattice strain and its relaxation towards the morphotropic phase boundary of Na0.5Bi0.5TiO3-based piezoelectrics: Impact on the structural and ferroelectric properties. In: PHYSICAL REVIEW B, 99 (17).

Das Ghosh, Lopamudra and Hasan, Jafar and Jain, Aditi and Sundaresan, Nagalingam R and Chatterjee, Kaushik (2019) A nanopillar array on black titanium prepared by reactive ion etching augments cardiomyogenic commitment of stem cells. In: NANOSCALE, 11 (43). pp. 20766-20776.

Das Ghosh, Lopamudra and Ravi, Venkatraman and Sanpui, Pallab and Sundaresan, Nagalingam R and Chatterjee, Kaushik (2017) Keratin mediated attachment of stem cells to augment cardiomyogenic lineage commitment. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 151 . pp. 178-188.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, KT (2001) Crystal structure, thermal expansion and electrical conductivity of $Nd_{0.7} Sr_{0.3} Fe_{1-x}Co_xO_3$ (0 \leq x \leq 0.8). In: High Temperature Materials and Processes, 20 (5-6). pp. 367-376.

Dasgupta, Nandita and Ranjan, Shivendu and Rajendran, Bhavapriya and Manickam, Venkatraman and Ramalingam, Chidambaram and Avadhani, GS and Kumar, Ashutosh (2016) Thermal co-reduction approach to vary size of silver nanoparticle: its microbial and cellular toxicology. In: ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 23 (5). pp. 4149-4163.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2001) Crystal Structure, Thermal Expansion and ElectricaH Conductivity of Yo.sCao.2Fel-x Mnx03+o (0 < x < 1.0). In: High Temperature Materials and Processes, 20 (5-6). pp. 367-376.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2002) Crystal structure and thermal and electrical properties of the perovskite solid solution Nd1-xSrxFeO3-delta (0 <= x <= 0.4). In: Solid State Ionics, 149 (3-4). pp. 227-236.

Dasgupta, Niladri and Krishnamoorthy, R and Jacob, Thomas K (2002) Crystal structure, thermal expansion and electrical conductivity of Nd0.7Sr0.3Fe1-xCoxO3 (0 <= x <= 0.8). In: Materials Science and Engineering B, 90 (3). pp. 278-286.

Dasgupta, Queeny and Chatterjee, Kaushik and Madras, Giridhar (2014) Combinatorial Approach to Develop Tailored Biodegradable Poly(xylitol dicarboxylate) Polyesters. In: BIOMACROMOLECULES, 15 (11). pp. 4302-4313.

Dasgupta, Queeny and Chatterjee, Kaushik and Madras, Giridhar (2015) Controlled Release of Salicylic Acid from Biodegradable Cross-Linked Polyesters. In: MOLECULAR PHARMACEUTICS, 12 (9). pp. 3479-3489.

Dasgupta, Queeny and Chatterjee, Kaushik and Madras, Giridhar (2016) Physical insights into salicylic acid release from poly(anhydrides). In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (3). pp. 2112-2119.

Dasgupta, Queeny and Madras, Giridhar and Chatterjee, Kaushik (2019) Biodegradable polyol-based polymers for biomedical applications. In: INTERNATIONAL MATERIALS REVIEWS, 64 (5). pp. 288-309.

Dasgupta, Queeny and Madras, Giridhar and Chatterjee, Kaushik (2016) Controlled release kinetics of p-aminosalicylic acid from biodegradable crosslinked polyesters for enhanced anti-mycobacterial activity. In: ACTA BIOMATERIALIA, 30 . pp. 168-176.

Dasgupta, Queeny and Madras, Giridhar and Chatterjee, Kaushik (2019) Gradient platform for combinatorial screening of thermoset polymers for biomedical applications. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 94 . pp. 766-777.

Dasgupta, Queeny and Movva, Sahitya and Chatterjee, Kaushik and Madras, Giridhar (2017) Controlled release from aspirin based linear biodegradable poly (anhydride esters) for anti-inflammatory activity. In: INTERNATIONAL JOURNAL OF PHARMACEUTICS, 528 (1-2). pp. 732-740.

Dasgupta, Ratul and Tomar, Gaurav and Govindarajan, Rama (2015) Numerical study of laminar, standing hydraulic jumps in a planar geometry. In: EUROPEAN PHYSICAL JOURNAL E, 38 (5).

Dasgupta, Subho and Das, Bijoy and Li, Qiang and Wang, Di and Baby, Tessy Theres and Indris, Sylvio and Knapp, Michael and Ehrenberg, Helmut and Fink, Karin and Kruk, Robert and Hahn, Horst (2016) Toward On-and-Off Magnetism: Reversible Electrochemistry to Control Magnetic Phase Transitions in Spinel Ferrites. In: ADVANCED FUNCTIONAL MATERIALS, 26 (41). pp. 7507-7515.

Dash, A and Bhattacharyya, S and Paul, A (2023) Concepts for estimating all types of diffusion coefficients of NiCoFeCr multi-principal element alloys using two dissimilar or a combination of ideal and non-ideal pseudo-ternary diffusion couples. In: Scripta Materialia, 237 .

Dash, A and Bhattacharyya, S and Paul, A (2023) Estimation of diffusion coefficients in NiCoFeCrAl multi-principal element alloy following an inventive design strategy of diffusion couples. In: Acta Materialia, 260 .

Dash, A and Esakkiraja, N and Paul, A (2020) Solving the issues of multicomponent diffusion in an equiatomic NiCoFeCr medium entropy alloy. In: Acta Materialia, 193 . pp. 163-171.

Dash, A and Paul, A (2022) Estimation of Tracer and Intrinsic Diffusion Coefficients from Body Diagonal Diffusion Couples in a Multi-Principal Element Alloy. In: Journal of Phase Equilibria and Diffusion .

Dash, A and Paul, A (2023) Estimation of diffusion coefficients by intersecting different types of diffusion paths in a multi-principal element alloy. In: Acta Materialia, 244 .

Dash, A and Paul, A and Sen, S and Divinski, S and Kundin, J and Steinbach, I and Grabowski, B and Zhang, X (2022) Recent Advances in Understanding Diffusion in Multiprincipal Element Systems. In: Annual Review of Materials Research, 52 . pp. 383-409.

Dash, Biswaranjan and Jangid, Rahul and Koneru, Shalini Roy and Pilchak, Adam and Banerjee, Dipankar (2019) The formation of alpha at triple junctions of parent beta phase in titanium alloys. In: PHILOSOPHICAL MAGAZINE, 99 (8). pp. 956-970.

Dash, K and Ray, B C (2018) Response of Al-Based Micro- and Nanocomposites to Rapid Fluctuations in Thermal Environments. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (7). pp. 3678-3687.

Dash, K and Yazar, KU and Chattopadhyay, K and Suwas, S (2020) Graded microstructure and texture in ultrafine grained multi-layered immiscible bimetallic system. In: Materialia, 13 .

Dash, S and Mohanty, HS and Sahoo, B and Pradhan, DK (2023) Tuning of physical and chemical properties of perovskite ceramic materials through surface modifications. [Book Chapter]

Datta, A and Srirangarajan, A and Waghmare, UV and Ramamurty, U and To, AC (2011) Surface effects on stacking fault and twin formation in fcc nanofilms: A first-principles study. In: Computational Materials Science, 50 (12). pp. 3342-3345.

Datta, Aditi and Waghmare, UV and Ramamurty, U (2008) Structure and stacking faults in layered Mg–Zn–Y alloys:A first-principles study. In: Acta Materialia, 56 (11). pp. 2531-2539.

Datta, K and Brajesh, K and Ranjan, R and Mihailova, B (2020) Adaptive dipolar correlation in ferroelectric x(Ba0.7Ca0.3)TiO3-(1-x)Ba(Zr0.2Ti0.8) O3. In: Physical Review B, 102 (6).

Datta, K and Kumar, N and Upadhyay, A and Mihailova, B and Ranjan, R (2021) Microscopic origin of giant piezoelectricity in ferroelectric xBi(Ni0.5Hf0.5) O3-(1-x)PbTiO3 beyond the morphotropic phase boundary. In: Physical Review B, 104 (14).

Datta, S and Barua, Ranjit and Das, Samir (2023) Role and challenges of bioprinting in bone tissue engineering. [Book Chapter]

Datta, S and Jain, N and Waidi, YO and Barua, R (2024) Processing and applications of shape memory alloys. [Book Chapter]

De, A and Dwij, V and Sathe, V and Hernández-Rodríguez, MA and Carlos, LD and Ranjan, R (2022) Synergistic use of Raman and photoluminescence signals for optical thermometry with large temperature sensitivity. In: Physica B: Condensed Matter, 626 .

De, A and Mishra, A and Khatua, DK and Dwij, V and Sathe, V and Jena, S and Ranjan, R (2022) Optical temperature sensing by tuning photoluminescence in a wide (visible to near infrared) wavelength range in a Eu3+-doped Bi-based relaxor ferroelectric. In: Optics Letters, 47 (3). pp. 489-492.

De, A and Ranjan, R (2020) Large structural heterogeneity in submicrometer BaTiO3revealed via Eu+3photoluminescence study. In: Journal of Applied Physics, 128 (12).

De, A and Ranjan, R (2020) Large temperature tuning of the emission color of a phosphor by dual use of Raman and photoluminescence signals. In: Materials Horizons, 7 (4). pp. 1101-1105.

De, Arnab and Ranjan, Rajeev (2018) Synergistic role of poling in enhancing structural heterogeneity in perovskite piezoelectrics. In: PHYSICAL REVIEW B, 98 (9).

De, Joyita and Umarji, AM and Chattopadhyay, K (2007) Origin of contamination and role of mechanochemistry during mechanical alloying: the case of Ag–Te alloys. In: Materials Science and Engineering A, 449-45 . pp. 1062-1066.

De, Tamasa and Goyal, Shina and Balachander, Gowri and Chatterjee, Kaushik and Kumar, Prashant and Babu, Govind K and Rangarajan, Annapoorni (2019) A Novel Ex Vivo System Using 3D Polymer Scaffold to Culture Circulating Tumor Cells from Breast Cancer Patients Exhibits Dynamic E-M Phenotypes. In: JOURNAL OF CLINICAL MEDICINE, 8 (9).

Deb, D and Sai Gautam, G (2022) Critical overview of polyanionic frameworks as positive electrodes for Na-ion batteries. In: Journal of Materials Research .

Debdutt, Patro and Bhattacharyya, Saswata and Vikram, Jayaram (2007) Flow Kinetics in Porous Ceramics: Understanding with Non-Uniform Capillary Models. In: Journal of the American Ceramic Society, 90 (10). pp. 340-346.

Deepthi, MV and Sailaja, RRN and Ananthapadmanabha, GS and Avadhani, GS (2014) Cross-linked Chitosan/Thermoplastic Starch Reinforced with Multiwalled Carbon Nanotubes Using Maleate Esters as Coupling Agent: Mechanical, Tribological and Thermal Characteristics. In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 53 (14). pp. 1476-1486.

Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2014) Multimodal shape oscillations of droplets excited by an air stream. In: CHEMICAL ENGINEERING SCIENCE, 114 . pp. 85-93.

Deeraj, BDS and Shebin, KJ and Bose, S and Sampath, S and Joseph, K (2022) Electrospun carbon fibers embedded with core–shell TiC@TiO nanostructures and their epoxy composites for potential EMI shielding in the Ku band. In: Nano-Structures and Nano-Objects, 32 .

Deevi, SC (1988) Importance of local heating in the compaction of thermally sensitive solids. In: Journal of Physics and Chemistry of Solids, 49 (3). 323 -325.

Deevi, Seetharama C (1988) Effect of mechanical treatment on the reactivity of ammonium perchlorate. In: Journal of Materials Science (full set), 23 (1). 201 -207.

Deka, Angshuman and Nanda, Karuna Kar (2013) Comparison of ZnO films deposited on indium tin oxide and soda lime glass under identical conditions. In: AIP Advances, 3 (6). 062104_1-062104_6.

Deng, Z and Mishra, TP and Mahayoni, E and Ma, Q and Tieu, AJK and Guillon, O and Chotard, J-N and Seznec, V and Cheetham, AK and Masquelier, C and Gautam, GS and Canepa, P (2022) Fundamental investigations on the sodium-ion transport properties of mixed polyanion solid-state battery electrolytes. In: Nature Communications, 13 (1).

Deng, Z and Sai Gautam, G and Kolli, SK and Chotard, J-N and Cheetham, AK and Masquelier, C and Canepa, P (2020) Phase Behavior in Rhombohedral NaSiCON Electrolytes and Electrodes. In: Chemistry of Materials, 32 (18). pp. 7908-7920.

Deo, N and Natarajan, KA (1998) Biological removal of some flotation collector reagents from aqueous solutions and mineral surfaces. In: Minerals Engineering, 11 (8). pp. 717-738.

Deo, N and Natarajan, KA (1997) Surface modification and biobeneficiation of some oxide minerals using Bacillus polymyxa. In: Minerals and Metallurgical Processing, 14 (3). pp. 32-39.

Deo, Namita and Natarajan, KA (1997) Interaction of Bacillus polymyxa with some oxide minerals with reference to mineral beneficiation and environmental control. In: Minerals Engineering, 10 (12). 1339-1354 .

Deo, Namita and Natarajan, KA (1998) Studies on interaction of Paenibacillus polymyxa with iron ore minerals in relation to beneficiation. In: International Journal of Mineral Processing, 55 (01). pp. 41-60.

Deo, Namita and Natarajan, KA and Rao, Hanumantha K and Forssberg, KSE (1999) Biodegradation of some organic reagents from mineral process effluents. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Deo, Namita and Natarajan, KA and Somasundaran, P (2001) Mechanisms of adhesion of Paenibacillus polymyxa onto hematite, corundum and quartz. In: International Journal of Mineral Processing, 62 (1-4). pp. 27-39.

Deo, Namita and Vasan, SS and Modak, Jayant M and Natarajan, KA (1999) Selective biodissolution of calcium and iron from bauxite in the presence of Bacillus polymyxa. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Deo , N and Natarajan, KA (1999) Role of corundum-adapted strains of Bacillus polymyxa in the separation of hematite and alumina. In: Minerals and Metallurgical Processing, 16 (4). pp. 29-34.

Deogade, BK and Bibhanshu, N and Kalsar, R and Acharyya, SG and Suresh, KS (2023) Constitutive Modelling of Hot Deformation Behaviour of Mg-0.5wt% Ce Alloy. In: Transactions of the Indian Institute of Metals .

Deonath, Bhat RT and Rohatgi, PK (1980) Fluidity of mica particle dispersed aluminium alloy. In: Journal of Materials Science, 15 (11). pp. 2777-2784.

Deore, KB and Narwade, VN and Patil, SS and Rondiya, SR and Bogle, KA and Tsai, M-L and Hianik, T and Shirsat, MD (2023) Fabrication of 3D bi-functional binder-free electrode by hydrothermal growth of MIL-101(Fe) framework on nickel foam: A supersensitive electrochemical sensor and highly stable supercapacitor. In: Journal of Alloys and Compounds, 958 .

Descloitres, Marc and Ruiz, Laurent and Sekhar, M and Legchenko, Anatoly and Braun, Jean-Jacques and Mohan Kumar, MS and Subramanian, S (2008) Characterization of seasonal local recharge using electrical resistivity tomography and magnetic resonance sounding. In: Hydorlogical Processes, 22 (3). pp. 384-394.

Deshpande, RJ and Nayak, UB (1988) The Amenability Studies on Beneficiation of Low Grade Phyllite Deposits of Tungsten From Degana, Rajasthan. In: Current Science, 41 (4). pp. 307-314.

Deshpande, RJ and Nayak, UB (1989) Flotation of low-grade phyllite deposits of tungsten from Degana, Rajasthan. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 109-114.

Deshpande, RJ and Natarajan, KA (1999) Studies on grinding media wear and its effect on flotation of ferrugenous phosphate ore. In: Minerals Engineering, 12 (9). pp. 1119-1125.

Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .1. Selection of cationic reagents. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 391-396.

Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .2. Optimization of flotation process. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 397-402.

Deshpande, SS and Saykar, NG and Mandal, A and Rahane, S and Jadhav, YA and Upadhyay Kahaly, M and Nagy, GN and Shinde, A and Suresh, S and Rondiya, SR (2024) Unravelling Structural, Optical, and Band Alignment Properties of Mixed Pb-Sn Metal-Halide Quasi-2D Ruddlesden-Popper Perovskites. In: Langmuir, 40 . 16180 - 16189.

Devabharathi, N and Mondal, SK and Pradhan, JR and Dasgupta, S (2020) Fully Printed Vertical Transport Edge FETs for High Power Oxide Electronics. In: 4th Electron Devices Technology and Manufacturing Conference, EDTM 2020 - Proceedings, 6-21 April 2020, Penang, Malaysia, Malaysia.

Devabharathi, N and Parasuraman, R and Umarji, AM and Dasgupta, S (2021) Ultra-high response ethanol sensors from fully-printed co-continuous and mesoporous tin oxide thin films. In: Journal of Alloys and Compounds, 865 .

Devabharathi, N and Pradhan, JR and Dasgupta, S (2022) Inkjet-printed mesoporous indium oxide-based near-vertical transport thin film transistors and pseudo-CMOS inverters. In: 2022 IEEE International Conference on Emerging Electronics, 11 - 14 Dec 2022, Bangalore.

Devabharathi, N and Pradhan, JR and Priyadarsini, SS and Brezesinski, T and Dasgupta, S (2022) Inkjet-Printed Narrow-Channel Mesoporous Oxide-Based n-Type TFTs and All-Oxide CMOS Electronics. In: Advanced Materials Interfaces .

Devabharathi, Nehru and Mondal, Sandeep Kumar and Dasgupta, Subho (2019) Inkjet-printed co-continuous mesoporous oxides for high-current power transistors. In: NANOSCALE, 11 (29). pp. 13731-13740.

Devarajan, A and Khadar, Abdul M and Chattopadhyay, K (2007) Effect of ball milling on chemically synthesized nanoparticles of $CaCO_3$. In: Materials Science and Engineering: A, 452-45 . pp. 395-400.

Devarapalli, R and Kadambi, SB and Chen, C-T and Krishna, GR and Kammari, BR and Buehler, MJ and Ramamurty, U and Malla Reddy, C (2019) Remarkably Distinct Mechanical Flexibility in Three Structurally Similar Semiconducting Organic Crystals Studied by Nanoindentation and Molecular Dynamics. In: Chemistry of Materials, 31 (4). pp. 1391-1402.

Devasia, P and Natarajan, KA and Rao, GR (1996) Role of bacterial growth conditions and adhesion in the bioleaching of chalcopyrite by Thiobacillus ferrooxidans. In: Minerals and Metallurgical Processing, 13 (2). 82-86 .

Devasia, Preston and Natarajan, KA (2010) Adhesion of Acidithiobacillus ferrooxidans to mineral surfaces. In: International Journal of Mineral Processing, 94 (3-4). pp. 135-139.

Devasia, Preston and Natarajan, KA and Sathyanarayana, DN and Rao, Ramananda G (1993) Surface Chemistry of Thiobacillus ferrooxidans Relevant to Adhesion on Mineral Surfaces. In: Applied and Environmental Microbiology, 59 (12). 4051-4055 .

Devi, Karthiga K and Natarajan, KA (2015) Isolation and characterization of a bioflocculant from Bacillus megaterium for turbidity and arsenic removal. In: MINERALS & METALLURGICAL PROCESSING, 32 (4). pp. 222-229.

Devi, Karthiga K and Natarajan, KA (2015) Production and characterization of bioflocculants for mineral processing applications. In: INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 137 . pp. 15-25.

Devi, R and Singh, B and Canepa, P and Sai Gautam, G (2022) Effect of exchange-correlation functionals on the estimation of migration barriers in battery materials. In: npj Computational Materials, 8 (1).

Devi G V, Y and Nagendra, AH and Shenoy  P, S and Chatterjee, K and Venkatesan, J (2022) Isolation and purification of fucoidan from Sargassum ilicifolium: Osteogenic differentiation potential in mesenchymal stem cells for bone tissue engineering. In: Journal of the Taiwan Institute of Chemical Engineers, 136 .

Devi GV, Y and Nagendra, AH and Shenoy P, S and Chatterjee, K and Venkatesan, J (2022) Fucoidan-Incorporated Composite Scaffold Stimulates Osteogenic Differentiation of Mesenchymal Stem Cells for Bone Tissue Engineering. In: Marine Drugs, 20 (10).

Dey, I and Muhammed Ajnas, N and Rege, SS and Islam, SS and Misra, A and Samanta, K and Manna, K and Bose, S (2023) Does the Varying Reactivity in the Transient Polymer Network through Dynamic Exchange Regulate the Closed-Loop Circularity in Polyolefin Vitrimers? In: ACS Applied Materials and Interfaces .

Dey, SR and Roy, Shibayan and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2010) Annealing response of the intermetallic alloy Ti-22Al-25Nb. In: Intermetallics, 18 (6). pp. 1122-1131.

Dey, SR and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2009) Evolution of crystallographic texture and microstructure in the orthorhombic phase of a two-phase alloy Ti-22Al-25Nb. In: Intermetallics, 17 (8). pp. 622-633.

Dey, SR and Suwas, Satyam and Fundenberger, JJ and Zou, JX and Grosdidier, T and Ray, RK (2008) Evolution of hot rolling texture in \beta (B2)-phase of a two-phase (O+B2) titanium–aluminide alloy. In: Materials Science and Engineering: A, 483-48 . pp. 551-554.

Dhaka, V and Singh, S and Anil, AG and Sunil Kumar Naik, TS and Garg, S and Samuel, J and Kumar, M and Ramamurthy, PC and Singh, J (2022) Occurrence, toxicity and remediation of polyethylene terephthalate plastics. A review. In: Environmental Chemistry Letters .

Dhandapani, SP and Jayaram, V and Surappa, MK (1994) Growth and microstructure of $Al_2O_3-SiC-Si(Al)$ composites prepared by reactive infiltration of silicon carbide preforms. In: Acta Metallurgica et Materialia, 42 (3). pp. 649-656.

Dhas, B and Roy, D (2021) A Geometrically Inspired Model for Kirchhoff Shells with Cartan’s Moving Frames. In: 7th International Congress on Computational Mechanics and Simulation, 2019, 11-13 December 2019, Mandi, pp. 163-176.

Dhineshbabu, N R and Bose, Suryasarathi (2019) UV resistant and fire retardant properties in fabrics coated with polymer based nanocomposites derived from sustainable and natural resources for protective clothing application. In: COMPOSITES PART B-ENGINEERING, 172 . pp. 555-563.

Dhineshbabu, NR and Behera, Shasanka Sekhar and Bose, Suryasarathi (2018) Smart Textile Fabrics for Screening Millimeter Wavelength Radiations: Challenges and Future Perspectives. In: CHEMISTRYSELECT, 3 (22). pp. 6087-6101.

Dhineshbabu, NR and Bose, Suryasarathi (2018) Smart Textiles Coated with Eco-Friendly UV-Blocking Nanoparticles Derived from Natural Resources. In: ACS OMEGA, 3 (7). pp. 7454-7465.

Dhua, SK and Raju, S and Chattopadhyay, K (1991) The liquid immiscibility and associated monotectic reaction in Zn-ln system. In: Metallurgical and Materials Transactions A, 22 (1). pp. 1131-1136.

Dias, ET and Priolkar, KR and Ranjan, Rajeev and Nigam, AK and Emura, S (2017) Mechanism of magnetostructural transformation in multifunctional Mn3GaC. In: JOURNAL OF APPLIED PHYSICS, 122 (10).

Dinh, LNM and Ramana, LN and Agarwal, V and Zetterlund, PB (2020) Miniemulsion polymerization of styrene using carboxylated graphene quantum dots as surfactant. In: Polymer Chemistry, 11 (18). pp. 3217-3224.

Dinh, LNM and Ramana, LN and Kuchel, RP and Agarwal, V and Zetterlund, PB (2020) Miniemulsion polymerization using carboxylated graphene quantum dots as surfactants: Effects of monomer and initiator type. In: Polymer Chemistry, 11 (36). pp. 5790-5799.

Dishwar, RK and Agrawal, S and Mandal, AK and Sinha, OP (2020) Smelting Process of Chromite Ore Fines to Produce Crude Fe–Cr–Ni–N Alloy. In: Transactions of the Indian Institute of Metals, 73 (3). pp. 537-542.

Dishwar, RK and Agrawal, S and Singh, AK and Sinha, OP (2022) Effect of Bath Environment and Charge Material on the Removal of Impurities from the Pig Iron Melt Using Laboratory Scale (2Â kg) Electric Arc Furnace. In: Transactions of the Indian Institute of Metals .

Dishwar, RK and Agrawal, S and Sinha, OP (2021) Weathering Behavior of Newly Developed Highly Fluxed DRI. In: Journal of Sustainable Metallurgy .

Divakar, M and Gornerup, M and Lahiri, AK (2001) Dissolution of alumina in stainless steelmaking slags. In: Steel Research, 72 (2). pp. 44-48.

Divakar, M and Gornerup, M and Lahiri, AK (2001) Reduction of iron oxide by carbon in stainless steelmaking slags. In: High Temperature Materials and Processes, 20 (5-6). pp. 393-401.

Divakar, M and Hajra, JP and Jakobsson, A and Seetharaman, S (2000) Thermodynamics of surfaces and adsorption in the Fe-C-S-O system. In: Metallurgical and Materials Transactions B, 31 (2). pp. 267-276.

Divakar, M and Gornerup, M and Lahiri, AK (2002) Simultaneous reduction of oxides and dissolution of alumina in stainless steelmaking slag. In: Ironmaking and Steelmaking, 29 (4). pp. 297-302.

Divakar, M and Hajra, JP (1997) The effect of temperature on the surface tension and adsorption functions of the Fe-S-O melts - an analysis based on interaction parameters. In: Steel Research, 68 (10). pp. 417-423.

Divakar, R and Sundararaman, D and Ranganathan, S (1998) Interfaces In Quasicrystalline Systems. In: MRS Proceedings, 553 . p. 209.

Divakar, R and Sundararaman, D and Ranganathan, S (1998) Interfaces In Quasicrystalline Systems. In: MRS Proceedings, 553 .

Divakar, R and Sundararaman, D and Ranganathan, S (1997) Studies of interfaces in Al-65 Cu20Fe15. In: Bulletin of Materials Science, 20 (4). pp. 519-523.

Divinski, SV and Lukianova, OA and Wilde, G and Dash, A and Esakkiraja, N and Paul, A (2021) High-Entropy Alloys: Diffusion. [Book Chapter]

Divya, M and Cherukupally, N and Gogoi, SK and Pradhan, JR and Mondal, SK and Jain, M and Senyshyn, A and Dasgupta, S (2023) Super Flexible and High Mobility Inorganic/Organic Composite Semiconductors for Printed Electronics on Polymer Substrates. In: Advanced Materials Technologies .

Divya, M and Dasgupta, S (2022) Inkjet-printable and low-temperature curable Ag–Ag2O mixed-phase conductive nanoink for flexible electronic applications. In: Applied Nanoscience (Switzerland) .

Divya, M and Pradhan, JR and Priyadarsini, SS and Dasgupta, S (2022) High Operation Frequency and Strain Tolerance of Fully Printed Oxide Thin Film Transistors and Circuits on PET Substrates. In: Small .

Divya, Mitta and Sethuraman, Sivaramakrishnan and Devabharathi, Nehru and Mondal, Sandeep Kumar and Dasgupta, Subho (2019) Low-Temperature Processing of Printed Field-Effect Transistors from Sublimating-Stabilizer Derived Oxide Nanodispersions. In: ADVANCED ELECTRONIC MATERIALS, 5 (7).

Divya, VD and Balam, SSK and Ramamurty, U and Paul, A (2010) Interdiffusion in the Ni-Mo system. In: Scripta Materialia, 62 (8). pp. 621-624.

Divya, VD and Ramamurty, U (2010) Interdiffusion Studies in the Co- Mo System. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Divya, VD and Ramamurty, U and Paul, A (2011) Interdiffusion and Growth of the Phases in CoNi/Mo and CoNi/W Systems. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A (5). pp. 1564-1577.

Divya, VD and Ramamurty, U and Paul, A (2013) Interdiffusion and solid solution strengthening in Ni-Co-Pt and Ni-Co-Fe ternary systems. In: Philosophical Magazine, 93 (17). pp. 2190-2206.

Divya, VD and Ramamurty, U and Paul, A (2013) Interdiffusion and solid solution strengthening in Ni-Co-Pt and Ni-Co-Fe ternary systems. In: PHILOSOPHICAL MAGAZINE, 93 (17). pp. 2190-2206.

Divya, VD and Ramamurty, U and Paul, A (2010) Topological close packed mu phase formation and the determination of diffusion parameters in the Co-Mo system. In: Intermetallics, 18 (2). pp. 259-266.

Divya, VD and Ramamurty, Upadrasta and Paul, A (2012) Effect of Pt on interdiffusion and mechanical properties of the gamma and gamma ` phases in the Ni-Pt-Al system. In: PHILOSOPHICAL MAGAZINE, 92 (17). pp. 2187-2214.

Divya, VD and Ramamurty, Upadrasta and Paula, Aloke (2011) Interdiffusion and the vacancy wind effect in Ni-Pt and Co-Pt systems. In: Journal of Materials Research, 26 (18). pp. 2384-2393.

Divyasree, P and Braun, JJ and Subramanian, S (2014) Comparative Studies on the Bioremediation of Hexavalent and Trivalent Chromium using Citrobacter freundii: Part I-Effect of parameters controlling Biosorption. In: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH, 8 (4). pp. 1127-1134.

Dixit, S and Dash, BB and Kumar, D and Bhattacharjee, A and Sankaran, S (2023) Influence of phase morphology, static recrystallization, and crystallographic texture on room temperature tensile properties of Ti–6Al–4V alloy: Comparison between post-tested equiaxed, bimodal, and lamellar microstructures. In: Materials Science and Engineering A, 873 .

Dixit, S and Kumar, D and Dash, BB and Suwas, S and Bhattacharjee, A and Sankaran, S (2022) Effect of solutionizing temperature and cooling rate on phase morphology, recrystallization and texture evolution in a heat treated Ti‐6Al‐4Valloy having different types of microstructure. In: Journal of Alloys and Compounds, 927 .

Dixit, Saurabh and Kashyap, Sanjay and Kailas, Satish V and Chattopadhyay, K (2018) Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 767 . pp. 1072-1082.

Dixit, Saurabh and Madhu, H C and Kailas, S V and Chattopadhyay, K (2017) Role of insert material on process loads during FSW. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 91 (9-12). pp. 3427-3435.

Dixit, Saurabh and Mahata, Avik and Mahapatra, D Roy and Kailas, Satish V and Chattopadhyaya, K (2018) Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying. In: COMPOSITES PART B-ENGINEERING, 136 . pp. 63-71.

Doddamani, MR and Kulkarni, SM and Kishore, * (2011) Behavior of Sandwich Beams With Functionally Graded Rubber Core in Three Point Bending. In: Polymer Composites, 32 (10). pp. 1541-1551.

Doddamani, Mrityunjay and Kishore, . and Shunmugasamy, Vasanth Chakravarthy and Gupta, Nikhil and Vijayakumar, HB (2015) Compressive and Flexural Properties of Functionally Graded Fly Ash Cenosphere-Epoxy Resin Syntactic Foams. In: POLYMER COMPOSITES, 36 (4). pp. 685-693.

Dolai, S and Maiti, P and Ghorai, A and Bhunia, R and Paul, PK and Ghosh, D (2021) Exfoliated Molybdenum Disulfide-Wrapped CdS Nanoparticles as a Nano-Heterojunction for Photo-Electrochemical Water Splitting. In: ACS Applied Materials and Interfaces, 13 (1). pp. 438-448.

Dong, Liyuan and Sun, Shijing and Deng, Zeyu and Li, Wei and Wei, Fengxia and Qi, Yajun and Li, Yanchun and Li, Xiaodong and Lu, Peixiang and Ramamurty, U (2017) Elastic properties and thermal expansion of lead-free halide double perovskite Cs2AgBiBr6. In: COMPUTATIONAL MATERIALS SCIENCE, 141 . pp. 49-58.

Drakshayani, DN and Mallya, RM (1991) Reactivity with hydrogen of pure iron oxide and of iron oxides doped with oxides of Mn, Co, Ni and Cu. In: Journal of Thermal Analysis, 37 (5). 891 -906.

Drakshayani, DN and Sankar, Chitra and Mallya, RM (1989) The reduction of manganese nodules by hydrogen. In: Thermochimica Acta, 144 (2). 313-328..

Drozd, Z and Trojanova, Z and Arlic, U and Kasakewitsch, A and Dash, K (2017) Effect of hexagonal boron nitride and graphite nanoparticles on the mechanical and physical properties of magnesium. In: 38TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, SEP 04-08, 2017, Riso, DENMARK.

Duan, K and Que, T and Koppala, S and Balan, R and Lokesh, B and Pillai, R and David, S and Karthikeyan, P and Ramamoorthy, S and Lekshmi, IC and Kemacheevakul, P and Padmavathy, N and Munusamy, S (2022) A facile route to synthesize n-SnO2/p-CuFe2O4 to rapidly degrade toxic methylene blue dye under natural sunlight. In: RSC Advances, 12 (26). pp. 16544-16553.

Dubach, A and Raghavan, R and Loeffler, JF and Michler, J and Ramamurty, U (2009) Micropillar compression studies on a bulk metallic glass in different structural states. In: Scripta Materialia, 60 (7). pp. 567-570.

Dubach, Alban and Prasad, K Eswar and Raghavan, Rejin and Loeffler, Joerg F (2009) Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass. In: Journal of Materials Research, 24 (8). pp. 2697-2704.

Durga, S and Nayak, UB (1987) Optimization on molybdenite flotation. In: Transactions of Indian Institute of Metals, 40 (5). pp. 395-406.

Durga, S and Nayak, UB (1990) Selective Flotation of Molybdenite and Chalcopyrite. In: Indian Journal of Technology, 28 (2). 45-48 .

Dutta, B and Samajdar, I and Surappa, MK (1998) Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites. In: Materials Science and Technology, 14 (1). pp. 36-46.

Dutta, A and Gupta, SK and Gumaste, A and Haridas, RS and Suwas, S and Mishra, RS and Nene, SS (2024) Excellent work hardening ability in a novel compositionally complex alloy by hierarchical microstructuring. In: Applied Materials Today, 39 (102300).

Dutta, A and Tung, S-Y and Gupta, SK and Tsai, M-H and Nene, SS (2022) Room-Temperature Superformability in Novel As-Cast High-Entropy Alloy During Compressive Loading. In: Advanced Engineering Materials .

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part I. Dendrite morphology. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1319-1327.

Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part II. Particle distribution. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1329-1339.

Dutta, B and Surappa, MK (1998) Microstructure evolution during multidirectional solidification of Al-Cu-SiC composites. In: Composites Part A, 29A (5-6). pp. 565-573.

Dutta, B and Surappa, MK (1997) Studies on age-hardening characteristics of ceramic particle/matrix interfaces in Al-Cu-SiCp composites using ultra low-load-dynamic microhardness measurements. In: Journal of Materials Research, 12 (10). pp. 2773-2778.

Dutta, S and Misra, A and Bose, S (2024) Polyoxometalate nanocluster-infused triple IPN hydrogels for excellent microplastic removal from contaminated water: detection, photodegradation, and upcycling. In: Nanoscale, 16 (10). pp. 5188-5205.

Dutta, S and Patel, BGM and Singh, Y and Hegde, G and Bose, S (2024) Photocatalytic driven �self-cleaning� IPN membranes infused with a �host-guest� pair consisting of metal-organic framework encapsulated anionic �nano-clusters� for water remediation. In: Journal of Membrane Science, 694 .

Dutta, S and Sen Gupta, R and Manna, K and Safikul Islam, S and Bose, S (2023) ‘Green-tea’ extract soldered triple interpenetrating polymer network membranes for water remediation. In: Chemical Engineering Journal, 472 .

Dutta, T and Mohan, D and Shenoy, S and Attar, N and Kalokhe, A and Sagar, A and Bhure, S and Pradhan, SS and Praharaj, J and Mridha, S and Kushwaha, A and Shah, V and Gururajan, MP and Shenoi, VV and Phanikumar, G and Bhattacharyya, S and Choudhury, A (2025) MicroSim: A high-performance phase-field solver based on CPU and GPU implementations. In: Computational Materials Science, 246 .

Dutta, Tanmay and Chauniyal, Ashish and Singh, I and Narasimhan, R and Thamburaja, P and Ramamurty, U (2018) Plastic deformation and failure mechanisms in nano-scale notched metallic glass specimens under tensile loading. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 111 . pp. 393-413.

Dwarakadasa, ES (1993) Low Temperature Microscopy and Analysis by Patric Echlin. In: Journal of the Electrochemical Society of India, 42 (4). p. 263.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1968) Beryllium-vacancy interaction in an Al-4.4%Zn-0.3%Be alloy. In: Scripta Metallurgica, 2 (11). pp. 639-642.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) Comments on ‘beryllium-vacancy interaction in Al-based alloys. In: Scripta Metallurgica, 3 (5). pp. 291-292.

Dwarakadasa, ES and Raman, KS and Vasu, KI (1969) On the influence of beryllium atoms on the resistivity changes due to clustering in Al--4.4%Zn alloy at 0°C. In: Scripta Metallurgica, 3 (5). pp. 327-331.

Dyawanapelly, Sathish and Jain, Nishant Kumar and KR, Sindhu and Prasanna, Maruthi and Singh, Akhilesh Vikram (2017) Biodegradable Polymers for Protein and Peptide Therapeutics: Next Generation Delivery Systems. [Book Chapter]

Dyawanapelly, Sathish and Junnuthula, Vijayabhaskar Reddy and Singh, AkhileshVikram (2015) The Holy Grail of Polymer Therapeutics for Cancer Therapy: An Overview on the Pharmacokinetics and Bio Distribution. In: CURRENT DRUG METABOLISM, 16 (7). pp. 522-537.

Dzwonczyk, Joanna and Prasad, Yellapregada Venkata Rama Krishna and Hort, Norbert and Kainer, Karl Ulrich (2006) Enhancement of workability in AZ31 alloy-processing maps: Part I,castmaterial. In: Advanced Engineering Materials, 8 (10). pp. 966-973.

E

Edalati, K and Bachmaier, A and Beloshenko, VA and Beygelzimer, Y and Blank, VD and Botta, WJ and Bry�a, K and �ížek, J and Divinski, S and Enikeev, NA and Estrin, Y and Faraji, G and Figueiredo, RB and Fuji, M and Furuta, T and Grosdidier, T and Gubicza, J and Hohenwarter, A and Horita, Z and Huot, J and Ikoma, Y and Jane�ek, M and Kawasaki, M and Král, P and Kuramoto, S and Langdon, TG and Leiva, DR and Levitas, VI and Mazilkin, A and Mito, M and Miyamoto, H and Nishizaki, T and Pippan, R and Popov, VV and Popova, EN and Purcek, G and Renk, O and Révész, � and Sauvage, X and Sklenicka, V and Skrotzki, W and Straumal, BB and Suwas, S and Toth, LS and Tsuji, N and Valiev, RZ and Wilde, G and Zehetbauer, MJ and Zhu, X (2022) Nanomaterials by severe plastic deformation: review of historical developments and recent advances. In: Materials Research Letters, 10 (4). pp. 163-256.

Elango, I and Selvamani, M and Ramamurthy, PC and Kesavan, AV (2022) Studying VOC in lead free inorganic perovskite photovoltaics by tuning energy bandgap and defect density. In: Ceramics International .

Elangovan, H and Maske, A and Narayanan, R and Ramamurthy, PC and Chattopadhyay, K (2020) Green synthesis of germanium nano ink and inkjet printing of Si/Ge heterostructure. In: Materials Research Bulletin, 132 .

Elangovan, H and Sengupta, S and Narayanan, R and Chattopadhyay, K (2021) Silicon nanoparticles with UV range photoluminescence synthesized through cryomilling induced phase transformation and etching. In: Journal of Materials Science, 56 (2). pp. 1515-1526.

Elangovan, Hemaprabha and Kesavan, Arul Varman and Chattopadhyay, Kamanio and Ramamurthy, Praveen C (2019) 2D layering of silicon nanocrystals at TiO2/CuI heterojunction for enhanced charge transport. In: JOURNAL OF APPLIED PHYSICS, 125 (24).

Elias, Eldho and Chandran, Sarath C and Zachariah, Ajesh K and Kumar, Vineesh V and Sunil, MA and Bose, Suryasarathi and Souza, Fernando G and Thomas, Sabu (2016) Percolated network formation in biocidal 3D porous PCL/clay nanocomposite scaffolds: effect of organic modifier on interfacial and water sorption properties. In: RSC ADVANCES, 6 (88). pp. 85107-85116.

Elumalai, Rajasegaran and Patil, Shilpa and Maliyakkal, Naseer and Rangarajan, Annapoorni and Kondaiah, Paturu and Raichur, Ashok M (2015) Protamine-carboxymethyl cellulose magnetic nanocapsules for enhanced delivery of anticancer drugs against drug resistant cancers. In: NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE, 11 (4). pp. 969-981.

Emge, A and Karthikeyan, S and Rigney, DA (2009) The effects of sliding velocity and sliding time on nanocrystalline tribolayer development and properties in copper. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 562-567.

Emge, Andrew and Karthikeyan, S and Kim, HJ and Rigney, DA (2007) The effect of sliding velocity on the tribological behavior of copper. In: Wear, 263 (1-6). pp. 614-618.

Enale, H and Surendran, A and Thottungal, A and Sarapulova, A and Punetha, P and Thankappakurup, S and Dixon, D and Nukala, P and Nishanthi, ST and Knapp, M and Bhaskar, A (2024) Cobalt-free spinel�layered structurally integrated Li0.8Mn0.64Ni0.183Fe0.091O2 cathodes for lithium-ion batteries. In: Journal of Energy Storage, 100 .

Eric A, Lord and Alan L, Mackay (2003) Periodic minimal surfaces of cubic symmetry. In: Current Science, 85 (3). pp. 346-362.

Esakkiraja, N and Dash, A and Mondal, A and Kumar, KCH and Paul, A (2021) Correlation between estimated diffusion coefficients from different types of diffusion couples in multicomponent system. In: Materialia, 16 .

Esakkiraja, N and Gupta, A and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2020) Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy. In: Acta Materialia, 195 (15). pp. 35-49.

Esakkiraja, N and Pandey, K and Dash, A and Paul, A (2019) Pseudo-binary and pseudo-ternary diffusion couple methods for estimation of the diffusion coefficients in multicomponent systems and high entropy alloys. In: Philosophical Magazine, 99 (18). pp. 2236-2264.

Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Corrigendum to �Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bond coats and Ni-based single crystal superalloy� Acta Mater. 266 (2024) 119687 (Acta Materialia (2024) 266, (S1359645424000405), (10.1016/j.actamat.2024.119687)). In: Acta Materialia, 277 .

Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy. In: Acta Materialia, 266 .

Esakkiraja, Neelamegan and Paul, Aloke (2018) A novel concept of pseudo ternary diffusion couple for the estimation of diffusion coefficients in multicomponent systems. In: SCRIPTA MATERIALIA, 147 . pp. 79-82.

Esther Rubavathi, P and Rahul, MT and Kalarikkal, N and Das Adhikary, G and Sundarakannan, B (2021) Enrichment of magnetoelectric effect in the hexagonal BaTi1-xCoxO3 artificial type-II multiferroics by defects. In: Journal of Magnetism and Magnetic Materials, 529 .

Eswar, Neerugatti KrishnaRao and Ramamurthy, Praveen C and Madras, Giridhar (2016) Novel synergistic photocatalytic degradation of antibiotics and bacteria using V-N doped TiO2 under visible light: the state of nitrogen in V-doped TiO2. In: NEW JOURNAL OF CHEMISTRY, 40 (4). pp. 3464-3475.

Eswar, Neerugatti KrishnaRao and Ramamurthy, Praveen Chandrashekarapura and Madras, Giridhar (2015) Enhanced sunlight photocatalytic activity of Ag3PO4 decorated novel combustion synthesis derived TiO2 nanobelts for dye and bacterial degradation. In: PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES, 14 (7). pp. 1227-1237.

Eswar, Neerugatti KrishnaRao and Ramamurthy, Praveen Chandrashekarapura and Madras, Giridhar (2015) High photoconductive combustion synthesized TiO2 derived nanobelts for photocatalytic water purification under solar irradiation. In: NEW JOURNAL OF CHEMISTRY, 39 (8). pp. 6040-6051.

Etana, BB and Ramakrishnan, S and Dhakshnamoorthy, Dhakshnamoorthymani@jueduet and Saravanan, S and C Ramamurthy, P and Demissie, TA (2019) Functionalization of textile cotton fabric with reduced graphene oxide/MnO2/polyaniline based electrode for supercapacitor. In: Materials Research Express, 6 (12).

Ettrich, J and Choudhury, A and Tschukin, O and Schoof, E and August, A and Nestler, B (2014) Modelling of transient heat conduction with diffuse interface methods. In: MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 22 (8).

Ezhilselvi, V and Balaraju, JN and Subramanian, S (2017) Chromate and HF free pretreatment for MAO/electroless nickel coating on AZ31B magnesium alloy. In: SURFACE & COATINGS TECHNOLOGY, 325 . pp. 270-276.

Ezhilselvi, V and Nithin, J and Balaraju, JN and Subramanian, S (2016) The influence of current density on the morphology and corrosion properties of MAO coatings on AZ31B magnesium alloy. In: SURFACE & COATINGS TECHNOLOGY, 288 . pp. 221-229.

F

Fatma, B and Gupta, S and Chatterjee, C and Bhunia, R and Verma, V and Garg, A (2020) Triboelectric generators made of mechanically robust PVDF films as self-powered autonomous sensors for wireless transmission based remote security systems. In: Journal of Materials Chemistry A, 8 (30). pp. 15023-15033.

Fechner, D and Dieringa, H and Maier, P and Kainer, KU and Mondal, AK and Kumar, S (2007) Interrupted creep of newly developed high pressure die cast Magnesium Alloys. In: Procs, Of Processing And Fabrication Of Advanced Materials Xvi, , Dec 2007 , Singapore.

Fegredo, DM and Balachandra, J (2008) Studies in the Electro-deposition of cobalt from fluoborate baths. In: Journal of Indian Institute of Science, 88 (3). pp. 782-792.

Femi, Olu Emmanuel and Akkiraju, Karthik and Murthy, BS and Ravishankar, N and Chattopadhyay, K (2016) Effect of processing route on the bipolar contribution to the thermoelectric properties of n-type eutectic Bi22.5Sb7.5Te70 alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, 682 . pp. 791-798.

Femi, Olu Emmanuel and Ravishankar, N and Chattopadhyay, K (2016) Microstructure evolution and thermoelectric properties of Te-poor and Te-rich (Bi,Sb)(2)Te-3 prepared via solidification. In: JOURNAL OF MATERIALS SCIENCE, 51 (15). pp. 7254-7265.

Fielitz, Peter and Kelm, Klemens and Bertram, Rainer and Chokshi, Atul H and Borchardt, Guenter (2017) Aluminium-26 grain boundary diffusion in pure and Y-doped polycrystalline alpha-alumina. In: ACTA MATERIALIA, 127 . pp. 302-311.

Fitzner, K and Alcock, CB and Jacob, KT (1977) Solubility and activity of oxygen in liquid germanium and germanium copper alloys. In: Metallurgical and Materials Transactions B, 8 (4). pp. 669-674.

Fitzner, K and Jacob, KT (1977) Solubility and activity of oxygen in liquid indium and copper indium alloys. In: Journal of the Less Common Metals, 52 (2). pp. 279-291.

Foryst, Pawlas E and Jacob, Thomas K and Fitzner, K (2006) Thermodynamics of $GdMnO_3$ and $GdMn_2O_5$ Phases Determined by the E.M.F Method. In: Archives of Metallurgy and Materials, 51 (3). pp. 481-488.

Frazier, WG and Seshacharyulu, T and Medeiros, SC and Prasad, YVRK (2002) Control of transient thermal response during sequential open-die forging: A trajectory optimization approach. In: Journal of Manufacturing Science and Engineering, 124 (3). pp. 502-508.

Fuxiao, YU and Dwarakadasa, ES and Ranganathan, S (1999) Distribution of lead in lead-containing aluminium alloys obtained by liquid phase co-spray forming technique. In: Bulletin of Materials Science, 22 (6). pp. 959-963.

Fuxiao, Yu and Jianzhong, Cui and Ranganathan, S and Dwarakadasa, ES (2001) Fundamental differences between spray forming and other semisolid processes. In: Materials Science and Engineering A, 304-30 . pp. 621-626.

G

G, V and Singh, S and Kaul, N and Ramamurthy, PC and Naik, TSSK and Viswanath, R and Kumar, V and Bhojya Naik, HS and A, P and H A, AK and Singh, J and Khan, NA (2023) Green synthesis of nickel-doped magnesium ferrite nanoparticles via combustion for facile microwave-assisted optical and photocatalytic applications. In: Environmental Research, 235 .

Gadadasu, C and Bora, PJ and Ramamurthy, PC (2022) Optimization of carbon fiber loading in PDMS for strong microwave absorption. In: 2022 IEEE International Conference on Emerging Electronics, ICEE 2022, 11- 14 Dec 2022, Bangalore, India.

Gaddam, Venkateswarlu and Kumar, Rakesh R and Parmar, Mitesh and Yaddanapudi, Krishna GR and Nayak, MM and Rajanna, K (2015) Morphology controlled synthesis of Al doped ZnO nanosheets on Al alloy substrate by low-temperature solution growth method. In: RSC ADVANCES, 5 (18). pp. 13519-13524.

Gadgil, Sulochana and Joseph, PV and Joshi, NV (1984) Ocean atmosphere coupling over monsoon regions. In: Nature, 312 (5990). pp. 141-143.

Gadi, VA and Gupta, GS (2023) Discrete Liquid Flow Behavior in a 2D Random Packed Bed. In: ISIJ International, 63 (5). pp. 810-821.

Gaertner, D and Kundin, J and Esakkiraja, N and Berndt, J and Durand, A and Kottke, J and Klemme, S and Laplanche, G and Eggeler, G and Wilde, G and Paul, A and Steinbach, I and Divinski, SV (2023) Tracer diffusion under a concentration gradient: A pathway for a consistent development of mobility databases in multicomponent alloys. In: Journal of Alloys and Compounds, 930 .

Gamini, Suresh and Vasu, V and Bose, Suryasarathi (2017) Tube-like natural halloysite/poly(tetrafluoroethylene) nanocomposites: simultaneous enhancement in thermal and mechanical properties. In: MATERIALS RESEARCH EXPRESS, 4 (4).

Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous $ZrO_2-Al_2O_3$ powders. In: Proceedings of Creep Behavior of Advanced Materials for the 21st Century. TMS Annual Meeting, 28 Feb.-4 March 1999, San Deigo, CA, USA, pp. 369-378.

Gandhi, AS and Jayaram, V (2003) Plastically deforming amorphous $ZrO_2-Al_2O_3$. In: Acta Materialia, 51 (6). pp. 1641-1649.

Gandhi, AS and Jayaram, V (1999) Pressure Consolidation of Amorphous ZrO2-Al2O3 by Plastic Deformation of Powder Particles. [Preprint]

Gandhi, AS and Jayaram, V (2002) Pressure consolidation of amorphous $ZrO_2–Al_2O_3$ by plastic deformation of powder particles. In: Acta Materialia, 50 (8). pp. 2137-2149.

Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous ZrO2-Al2O3 powders. In: Symposium on Creep Behavior of Advanced Materials for the 21st-Century, at the 1999 TMS Annual Meeting, FEB 28-MAR 04, 1999, San Diego, California.

Gandhi, AS and Jayaram, V and Chokshi, AH (2001) Low temperature densification behaviour of metastable phases in $ZrO_2–Al_2O_3$ powders produced by spray pyrolysis. In: Materials Science and Engineering A, 304-30 . pp. 785-789.

Gandhi, AS and Jayaram, V and Chokshi, AH (1997) Phase evolution and densification of spray pyrolysed ZrO2-Al2O3 powders. In: Materials Science Forum, 243 . 227-232 .

Gandhi, AS and Saravanan, A and Jayaram, V (1996) Containerless processing of ceramics by aerodynamic levitation. In: Materials Science & Engineering A, 221 (1-2). pp. 68-75.

Gandhi, Ashutosh S and Vikram, Jayaram and Chokshi, Atul H (1999) Dense Amorphous Zirconia-Alumina by Low Temperature Consolidation of Spray Pyrolyzed Powders. [Preprint]

Ganesh, P and Dishwar, RK and Agrawal, S and Mandal, AK and Sahu, N and Sinha, OP (2020) Feasibility of nickel extraction from Indian chromite overburden by solid state reduction and smelting route. In: Journal of Mining and Metallurgy, Section B: Metallurgy, 56 (2). pp. 229-235.

Ganganagappa, Nagaraju and Siddaramanna, Ashoka (2012) One step synthesis of monoclinic VO2 (B) bundles of nanorods: Cathode for Li ion battery. In: MATERIALS CHARACTERIZATION, 68 . pp. 58-62.

Ganguly, S and Mondal, AK and Sarkar, S and Basu, A and Kumar, S and Blawert, C (2020) Improved corrosion response of squeeze-cast SiC nanoparticles reinforced AZ91-2.0Ca-0.3Sb alloy. In: Corrosion Science .

Gangwar, J and Balasubramanian, B and Pratap Singh, A and Meyyazhagan, A and Pappuswamy, M and Alanazi, AM and Rengasamy, KRR and Kadanthottu Sebastian, J (2023) Biosynthesis of zinc oxide nanoparticles mediated by Strobilanthes hamiltoniana: Characterizations, and its biological applications. In: Kuwait Journal of Science .

Gao, Y and Mishra, TP and Bo, SH and Sai Gautam, G and Canepa, P (2022) Design and Characterization of Host Frameworks for Facile Magnesium Transport. In: Annual Review of Materials Research, 52 . pp. 129-158.

Garg, Kavita and Shanmugam, Ramakrishanan and Ramamurthy, Praveen C (2018) Synthesis, characterisation and optical studies of new tetraethyl-rubyrin-graphene oxide covalent adducts. In: OPTICAL MATERIALS, 76 . pp. 42-47.

Garg, Kavita and Shanmugam, Ramakrishnan and Ramamurthy, Praveen C (2017) New covalent hybrids of graphene oxide with core modified and -expanded porphyrins: Synthesis, characterisation and their non linear optical properties. In: CARBON, 122 . pp. 307-318.

Garg, Rohini and Ranganathan, S and Suwas, Satyam (2010) Effect of mode of rolling on development of texture and microstructure in two-phase (alpha plus beta) brass. In: Materials Science and Engineering A, 527 (18-19). pp. 4582-4592.

Garg, Rohini and Rao, Badari Narayana and Senyshyn, Anatoliy and Krishna, PSR. and Ranjan, Rajeev (2013) Lead-free piezoelectric system (Na0.5Bi0.5)TiO3-BaTiO3: Equilibrium structures and irreversible structural transformations driven by electric field and mechanical impact. In: PHYSICAL REVIEW B, 88 (1).

Garg, Rohini and Rao, Badari Narayana and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Long ranged structural modulation in the pre-morphotropic phase boundary cubic-like state of the lead-free piezoelectric Na1/2Bi1/2TiO3-BaTiO3. In: JOURNAL OF APPLIED PHYSICS, 114 (23).

Garg, Rohini and Senyshyn, Anatoliy and Boysen, Hans and Ranjan, Rajeev (2008) Structure and phase transition of Na0.5La0.5TiO3. In: Journal of Physics:Condensed Matter, 20 (50). pp. 505215-1.

Garg, Rohini and Senyshyn, Anatoliy and Boysen, Hans and Ranjan, Rajeev (2009) Structure of the noncubic phase in the ferroelectric state of Pr-substituted SrTiO3. In: Physical Review B, 79 (14).

Garg, Rohini and Senyshyn, Anatoliy and Ranjan, Rajeev (2012) Complex structural phase transitions in slightly Ca modified Na0.5Bi0.5TiO3. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 24 (45).

Gargeya, BSK and Kumar, S and Ray, BC and Pal, S (2020) Study of debonding phenomena at interface and its implication on mechanical behaviour of epoxy-CNT nano-composite using molecular dynamics simulation. In: 6th International Conference on Recent Advances in Composite Materials, ICRACM 2019, 25-28 February 2019, Varanasi, pp. 1111-1115.

Garlapati, Suresh Kumar and Divya, Mitta and Breitung, Ben and Kruk, Robert and Hahn, Horst and Dasgupta, Subho (2018) Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices. In: ADVANCED MATERIALS, 30 (40).

Garlapati, Suresh Kumar and Gebauer, Julia Susanne and Dehm, Simone and Bruns, Michael and Winterer, Markus and Hahn, Horst and Dasgupta, Subho (2017) Room-Temperature Processing of Printed Oxide FETs Using Ultraviolet Photonic Curing. In: ADVANCED ELECTRONIC MATERIALS, 3 (9).

Garlapati, Suresh Kumar and Marques, Gabriel Cadilha and Gebauer, Julia Susanne and Dehm, Simone and Bruns, Michael and Winterer, Markus and Tahoori, Mehdi Baradaran and Aghassi-Hagmann, Jasmin and Hahn, Horst and Dasgupta, Subho (2018) High performance printed oxide field-effect transistors processed using photonic curing. In: NANOTECHNOLOGY, 29 (23).

Garner, LE and Nellissery Viswanathan, V and Arias, DH and Brook, CP and Christensen, ST and Ferguson, AJ and Kopidakis, N and Larson, BW and Owczarczyk, ZR and Pfeilsticker, JR and Ramamurthy, PC and Strauss, SH and Boltalina, OV and Braunecker, WA (2018) Photobleaching dynamics in small molecule: Vs. polymer organic photovoltaic blends with 1,7-bis-trifluoromethylfullerene. In: Journal of Materials Chemistry A, 6 (11). pp. 4623-4628.

Gault, B and Chiaramonti, A and Cojocaru-MirÃdin, O and Stender, P and Dubosq, R and Freysoldt, C and Makineni, SK and Li, T and Moody, M and Cairney, JM (2021) Atom probe tomography. In: Nature Reviews Methods Primers, 1 (1).

Gaur, Anupama and Shukla, Rahul and Brajesh, Kumar and Pal, Arkadeb and Chatterji, Sandeep and Ranjan, Rajeev and Maiti, Pralay (2016) Processing and nanoclay induced piezoelectricity in poly(vinylidene fluoride-co-hexafluoro propylene) nanohybrid for device application. In: POLYMER, 97 . pp. 362-369.

Gayathri, N and Goswami, R and Banerjee, S (1997) Electrical resistivity and point contact studies on Al-Pd-Mn icosahedral quasicrystals. In: Bulletin of Material Science, 20 (4). pp. 531-534.

Gayen, Arup and Baidya, Tinku and Biswas, Krishanu and Roy, Sounak and Hegde, MS (2006) Synthesis, structure and three way catalytic activity of $Ce_{1-x}Pt_{x/2}Rh_{x/2}O_{2-\delta}$ (x = 0.01 and 0.02) nano-crystallites: Synergistic effect in bimetal ionic catalysts. In: Applied Catalysis A: General, 315 . pp. 135-146.

Gebrekrstos, A and Biswas, S and Menon, AV and Madras, G and Pötschke, P and Bose, S (2019) Multi-layered stack consisting of PVDF nanocomposites with flow-induced oriented MWCNT structure can supress electromagnetic radiation. In: Composites Part B: Engineering, 166 . pp. 749-757.

Gebrekrstos, A and Biswas, S and Menon, AV and Madras, G and Pötschke, P and Bose, S (2019) Multi-layered stack consisting of PVDF nanocomposites with flow-induced oriented MWCNT structure can supress electromagnetic radiation. In: Composites Part B: Engineering, 166 . pp. 749-757.

Gebrekrstos, Amanuel and Biswas, Sourav and Menon, Aishwarya V and Madras, Giridhar and Poetschke, Petra and Bose, Suryasarathi (2019) Multi-layered stack consisting of PVDF nanocomposites with flow-induced oriented MWCNT structure can supress electromagnetic radiation. In: COMPOSITES PART B-ENGINEERING, 166 . pp. 749-757.

Gebrekrstos, Amanuel and Madras, Giridhar and Bose, Suryasarathi (2019) Journey of Electroactive beta-Polymorph of Poly(vinylidenefluoride) from Crystal Growth to Design to Applications. In: CRYSTAL GROWTH & DESIGN, 19 (9). pp. 5441-5456.

Gebrekrstos, Amanuel and Sharma, Maya and Bahl, Sumit and Madras, Giridhar and Suwas, Satyam and Bose, Suryasarathi (2018) Process mediated polymorphism, crystallographic texture and structure-property correlation in crystalline/amorphous blends. In: POLYMER, 138 . pp. 307-319.

Gebrekrstos, Amanuel and Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2016) New Physical Insights into Shear History Dependent Polymorphism in Poly(vinylidene fluoride). In: CRYSTAL GROWTH & DESIGN, 16 (5). pp. 2937-2944.

Gebrekrstos, Arnanuel and Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2017) Critical Insights into the Effect of Shear, Shear History, and the Concentration of a Diluent on the Polymorphism in Poly(vinylidene fluoride). In: CRYSTAL GROWTH & DESIGN, 17 (4). pp. 1957-1965.

George, J and Philip, JT and Mathew, J and Manu, R (2022) Prediction and analysis of material removal rate and white layer thickness during wire electrical discharge turning (WEDT) process. In: CIRP Journal of Manufacturing Science and Technology, 39 . pp. 210-222.

Ghosal, K and Mondal, P and Bera, S and Ghosh, S (2021) Graphene family nanomaterials- opportunities and challenges in tissue engineering applications. In: FlatChem, 30 .

Ghosh, A and Gautam, K and Gupta, C and Hazra, C and Das, L and Chakravorty, N and Mishra, MM and Nain, A and Anbumani, S and Lin, C-J and Sen, R and Dasgupta, N and Ranjan, S (2024) Single-Step Low-Temperature Synthesis of Carbon Dots for Advanced Multiparametric Bioimaging Probe Applications. In: ACS Applied Bio Materials .

Ghosh, A and Ghosh, M and Gudimetla, K and Kalsar, R and Kestens, LAI and Kondaveeti, CS and Singh Pugazhendhi, B and Ravisankar, B (2020) Development of ultrafine grained Al�Zn�Mg�Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties. In: Archives of Civil and Mechanical Engineering, 20 (1).

Ghosh, A and Reddy, ST and Gawande, A (2024) A nanoindentation-based investigation of the local deformation mechanism of additively manufactured Ti6242 alloy. In: MRS Communications, 14 . pp. 419-426.

Ghosh, Abhishek and Ghosh, Manojit and Kalsar, Rajib (2019) Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al-Zn-Mg-Cu-Ag alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, 802 . pp. 276-289.

Ghosh, Abhishek and Ghosh, Manojit and Shankar, Gyan (2018) On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 738 . pp. 399-411.

Ghosh, Anirban and Sahu, Jyoti Ranjan and Bhat, S Venkataprasad and Rao, CNR (2009) A Raman study of multiferroic LuMnO3. In: Solid State Sciences, 11 (9). pp. 1639-1642.

Ghosh, C (2011) Flux Partitioning of Species Approach in Binary Interdiffusion Process. In: Journal of Phase Equilibria and Diffusion, 32 (5). pp. 418-421.

Ghosh, C (2010) Interdiffusion study in binary gold-tin system. In: Intermetallics, 18 (11). pp. 2178-2182.

Ghosh, C (2013) Study on important diffusion parameters of binary Ni3Sn4 phase. In: Journal of Materials Science: Materials in Electronics, 24 (7). pp. 2558-2561.

Ghosh, C and Paul, A (2009) Different phenomenological theories and their abilities to describe the interdiffusion process in a binary system during multiphase growth. In: Acta Materialia, 57 (2). pp. 493-502.

Ghosh, C and Paul, A (2008) Elucidation of bifurcation of the Kirkendall marker plane in a single phase using physico-chemical approach. In: Intermetallics, 16 (8). pp. 955-961.

Ghosh, C and Paul, A (2007) A physico-chemical approach in binary solid-state interdiffusion. In: Acta Materialia, 55 (6). pp. 1927-1939.

Ghosh, Lopamudra Das and Jain, Aditi and Sundaresan, Nagalingam Ravi and Chatterjee, Kaushik (2018) Elucidating molecular events underlying topography mediated cardiomyogenesis of stem cells on 3D nanofibrous scaffolds. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 88 . pp. 104-114.

Ghosh, Lopamudra Das and Ravi, Venkatraman and Jain, Aditi and Panicker, Arpana G and Sundaresan, Nagalingam R and Chatterjee, Kaushik (2019) Sirtuin 6 mediated stem cell cardiomyogenesis on protein coated nanofibrous scaffolds. In: NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE, 19 . pp. 145-155.

Ghosh, P and Paria, D and Balasubramanian, K and Ghosh, A and Narayanan, R and Raghavan, S (2019) Directed Microwave-Assisted Self-Assembly of Au–Graphene–Au Plasmonic Dimers for SERS Applications. In: Advanced Materials Interfaces, 6 (18).

Ghosh, Pradipta and Chokshi, Atul H (2015) Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (12). pp. 5671-5684.

Ghosh, Pradipta and Van Petegem, Steven and Van Swygenhoven, Helena and Chokshi, Atul H (2017) An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 701 . pp. 101-110.

Ghosh, Priyadarshini and Kumar, Shishir and Ramalingam, Gopalakrishnan and Kochat, Vidya and Radhakrishnan, Madhavan and Dhar, Sukanya and Suwas, Satyam and Ghosh, Arindam and Ravishankar, N and Raghavan, Srinivasan (2015) Insights on Defect-Mediated Heterogeneous Nucleation of Graphene on Copper. In: JOURNAL OF PHYSICAL CHEMISTRY C, 119 (5). pp. 2513-2522.

Ghosh, Prosenjit and Prasanna, K and Banerjee, Yogaraj and Williams, Ian and Gagan, Michael K and Chaudhuri, Atanu and Suwas, Satyam (2018) Rainfall seasonality on the Indian subcontinent during the Cretaceous greenhouse (vol 8, 8482, 2018). In: SCIENTIFIC REPORTS, 8 .

Ghosh, R and Telpande, S and Gowda, P and Reddy, SK and Kumar, P and Misra, A (2020) Deterministic Role of Carbon Nanotube-Substrate Coupling for Ultrahigh Actuation in Bilayer Electrothermal Actuators. In: ACS Applied Materials and Interfaces, 12 (26). pp. 29959-29970.

Ghosh, Rituparna and Kanjilal, Anwesha and Kumar, Praveen (2017) Effect of type of thermo-mechanical excursion on growth of interfacial intermetallic compounds in Cu/Sn-Ag-Cu solder joints. In: MICROELECTRONICS RELIABILITY, 74 . pp. 44-51.

Ghosh, S and Behera, SK and Mishra, A and Casari, CS and Ostrikov, KK (2023) Quantum Capacitance of Two-Dimensional-Material-Based Supercapacitor Electrodes. In: Energy and Fuels, 37 (23). pp. 17836-17862.

Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2023) Micro-mechanisms underlying enhanced fatigue life of additively manufactured 316L stainless steel with a gradient heterogeneous microstructure. In: Materials Science and Engineering: A, 886 .

Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2021) Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. In: Materials Science and Engineering A, 820 .

Ghosh, S and Chatterjee, K (2020) Poly(Ethylene glycol) functionalized graphene oxide in tissue engineering: A review on recent advances. In: International Journal of Nanomedicine, 15 . pp. 5991-6006.

Ghosh, S and Chokshi, AH (2007) Microstructural Design for Superplasticity in Ceramics. In: Procs. Of Frontiers In The Design Of Materials, , 2007, Chennai, India.

Ghosh, S and Erram, A and Namadi, M and Ballal, NB and Viswanathan, NN (2021) The Efficacy of a Three-Dimensional Static Liquid–Vapor Interface Model to Calculate the Static Liquid Holdup of a Packed Bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 52 (4). pp. 2072-2086.

Ghosh, S and Kumar, H and Brandl, C and Choudhury, AN and Bhattacharyya, S and Mukherjee, R (2024) Effect of molybdenum addition on precipitate coarsening kinetics in Inconel 740H: A phase-field study. In: Intermetallics, 175 .

Ghosh, S and Nitin, B and Remanan, S and Bhattacharjee, Y and Ghorai, A and Dey, T and Das, TK and Das, NC (2020) A Multifunctional Smart Textile Derived from Merino Wool/Nylon Polymer Nanocomposites as Next Generation Microwave Absorber and Soft Touch Sensor. In: ACS Applied Materials and Interfaces, 12 (15). pp. 17988-18001.

Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Chandra Mallik, R (2021) Thermoelectric properties enhancement of Ba0·2Co4Sb12 through dispersion of GaSb inclusions. In: Physica B: Condensed Matter .

Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Preferential phonon scattering and low energy carrier filtering by interfaces of: In situ formed InSb nanoprecipitates and GaSb nanoinclusions for enhanced thermoelectric performance of In0.2Co4Sb12. In: Dalton Transactions, 49 (44). pp. 15883-15894.

Ghosh, S and Shankar, G and Karati, A and Werbach, K and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Enhanced Thermoelectric Performance in the Ba0.3Co4Sb12/InSb Nanocomposite Originating from the Minimum Possible Lattice Thermal Conductivity. In: ACS Applied Materials and Interfaces, 12 (43). pp. 48729-48740.

Ghosh, S and Tippireddy, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Malladi, SRK and Murty, BS and Suwas, S and Mallik, RC (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. In: Journal of Alloys and Compounds, 880 .

Ghosh, S and Valiyaveettil, SM and Shankar, G and Maity, T and Chen, K-H and Biswas, K and Suwas, S and Mallik, RC (2020) Enhanced Thermoelectric Properties of In-Filled Co4Sb12 with InSb Nanoinclusions. In: ACS Applied Energy Materials, 3 (1). pp. 635-646.

Ghosh, SK and Yadav, M (2024) Effects of Intercritical Annealing on Microstructure and Mechanical Properties of Low C-Mn Steels. In: Metallography, Microstructure, and Analysis .

Ghosh, Santonu and Chokshi, Atul H (2014) Creep in nanocrystalline zirconia. In: SCRIPTA MATERIALIA, 86 . pp. 13-16.

Ghosh, Santonu and Chokshi, Atul H and Lee, Pilhwa and Raj, Rishi (2009) A Huge Effect of Weak dc Electrical Fields on Grain Growth in Zirconia. In: Journal of the American Ceramic Society, 92 (8). pp. 1856-1859.

Ghosh, Santonu and Kilo, Martin and Borchardt, Guenter and Chokshi, Atul H (2009) Diffusion and Creep in Silica-Doped Tetragonal Zirconia. In: Journal of the American Ceramic Society, 92 (12). pp. 3004-3013.

Ghosh, Santonu and Swaroop, Sathya and Fielitz, Peter and Borchardt, Guenter and Chokshi, Atul H (2011) Influence of grain boundary sliding on diffusion in yttria doped zirconia. In: Journal of the European Ceramic Society, 31 (6). pp. 1027-1032.

Ghosh, Sanyukta and Bisht, Anuj and Karati, Anirudha and Rogl, Gerda and Rogl, Peter and Murty, B S and Suwas, Satyam and Mallik, Ramesh Chandra (2018) Thermoelectric properties of Co4Sb12 with Bi2Te3 nanoinclusions. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 30 (9).

Ghosh, Soumyajit and Mishra, Manish Kumar and Kadambi, Sourabh B and Ramamurty, Upadrasta and Desiraju, Gautam R (2015) Designing Elastic Organic Crystals: Highly Flexible Polyhalogenated N-Benzylideneanilines. In: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 54 (9). pp. 2674-2678.

Ghosh, Supriyo and Choudhury, Abhik and Plapp, Mathis and Bottin-Rousseau, Sabine and Faivre, Gabriel and Akamatsu, Silvere (2015) Interphase anisotropy effects on lamellar eutectics: A numerical study. In: PHYSICAL REVIEW E, 91 (2).

Ghosh, Supriyo and Mukherjee, Arnab and Abinandanan, TA and Bose, Suryasarathi (2017) Particles with selective wetting affect spinodal decomposition microstructures. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 19 (23). pp. 15424-15432.

Gibbons, PC and Kelton, KF and Ranganathan, S and Daulton, TL (2000) Kikuchi bands in quasicrystals and their approximants. In: Philosophical Magazine A, 80 (4). pp. 843-852.

Giri, Sushi K and Krishnan, Madangopal and Ramamurty, U (2010) Enhancement of fatigue life of Ni-Ti-Fe shape memory alloys by thermal cycling. In: Materials Science and Engineering A, 528 (1). pp. 363-370.

Giridhar, R and Surappa, MK (1993) Effect of Aging on Impact Fracture Behavior of 2024Al-$Al_2O_3P$ Composites Made by Casting Route. In: The Ninth International Conference on Composite Materials, 1993, pp. 219-226.

Girija, K and Thirumalairajan, S and Avadhani, GS and Mahgalaraj, D and Ponpandian, N and Viswanathan, C (2013) Synthesis, morphology, optical and photocatalytic performance of nanostructured beta-Ga2O3. In: Materials Research Bulletin, 48 (6). pp. 2296-2303.

Gnanadhas, Divya Prakash and Ben Thomas, Midhun and Elango, Monalisha and Raichur, Ashok M and Chakravortty, Dipshikha (2013) Chitosan-dextran sulphate nanocapsule drug delivery system as an effective therapeutic against intraphagosomal pathogen Salmonella. In: Journal of Antimicrobial Chemotherapy, 68 (11). pp. 2576-2586.

Gnanadhas, Divya Prakash and Ben Thomas, Midhun and Elango, Monalisha and Raichur, Ashok M and Chakravortty, Dipshikha (2013) Chitosan-dextran sulphate nanocapsule drug delivery system as an effective therapeutic against intraphagosomal pathogen Salmonella. In: JOURNAL OF ANTIMICROBIAL CHEMOTHERAPY, 68 (11). pp. 2576-2586.

Gnanadhas, Divya Prakash and Ben Thomas, Midhun and Thomas, Rony and Raichur, Ashok M and Chakravortty, Dipshikha (2013) Interaction of Silver Nanoparticles with Serum Proteins Affects Their Antimicrobial Activity In Vivo. In: ANTIMICROBIAL AGENTS AND CHEMOTHERAPY, 57 (10). pp. 4945-4955.

Gnanadhas, Divya Prakash and Elango, Monalisha and Ben Thomas, Midhun and Gopalan, Jagadeesh and Chakravortty, Dipshikha (2015) Remotely triggered micro-shock wave responsive drug delivery system for resolving diabetic wound infection and controlling blood sugar levels. In: RSC ADVANCES, 5 (17). pp. 13234-13238.

Godthi, Vamsy and Pratap, Rudra (2015) Dynamics of Cricket Sound Production. In: JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 137 (4).

Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.

Gokhale, AA and Ramamurty, U (2007) Production, Properties and Applications of Aluminium Foams. In: Procs. International Conference On Aluminium, INCAL 2007, , Nov. 2007, Hyderabad.

Gollapudi, S and Azeem, MA and Tewari, A and Ramamurty, U (2011) Orientation dependence of the indentation impression morphology in a Mg alloy. In: Scripta Materialia, 64 (2). pp. 189-192.

Gollerthan, S and Young, ML and Neuking, K and Ramamurty, U and Eggeler, G (2009) Direct physical evidence for the back-transformation of stress-induced martensite in the vicinity of cracks in pseudoelastic NiTi shape memory alloys. In: Acta Materialia, 57 (19). pp. 5892-5897.

Gond, R (2019) Metaphosphate Class of Redox-Active Materials for Oxygen Evolution Reaction. In: Electrochemical Society Interface, 28 (4). pp. 84-85.

Gopal, Judy and Muraleedharan, P and George, RP and Sarvamangala, H and Kalaichelvan, PT and Khatak, HS and Natarajan, KA (2007) Morphological differentiation observed in manganese oxidizing bacterial colonies. In: National Academy Science Letters (India), 30 (11-12). pp. 371-375.

Gopalan, H and Chokshi, AH (2019) On the limiting grain sizes in carbon nanotube nanocomposites. In: Materialia, 5 .

Gopalan, Hariprasad and Chokshi, Atul H (2018) Creep in alumina and carbon nanotube reinforced alumina composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 731 . pp. 561-568.

Gopalan, Hariprasad and Chokshi, Atul H (2018) The mechanical behavior of nacre across length scales. In: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 78 . pp. 96-107.

Gopalan, Veena E and Malini, KA and Saravanan, S and Kumar, Sakthi D and Yoshida, Yasuhiko and Anantharaman, MR (2008) Evidence for polaron conduction in nanostructured manganese ferrite. In: Journal of Physics D-Applied Physics, 41 (18). pp. 185005-1.

Gopi, Vidya and Subbiahraj, Saravanan and Chemmanghattu, Karthika and Ramamurthy, Praveen C (2020) 2,3-di(2-furyl) quinoxaline bearing 3-ethyl rhodanine and 1,3 indandione based heteroaromatic conjugated T-shaped push -pull chromophores: Design, synthesis, photophysical and non-linear optical investigations. In: DYES AND PIGMENTS, 173 .

Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2009) Low cycle fatigue behaviour of a low interstitial Ni-base superalloy. In: Acta Materialia, 57 (12). pp. 3450-3459.

Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2008) Tensile Properties of Ni-Based Superalloy 720Li: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2340-2350.

Gopinath, K and Gogia, AK and Kamat, SV and Ramamurty, U (2009) Dynamic strain ageing in Ni-base superalloy 720Li. In: Acta Materialia, 57 (4). pp. 1243-1253.

Goran, D and Fundenberger, JJ and Bouzy, E and Skrotzki, W and Suwas, S and Grosdidier, T and Toth, LS (2011) Local texture and microstructure in cube-oriented nickel single crystal deformed by equal channel angular extrusion. In: Philosophical Magazine, 91 (2). pp. 291-309.

Goran, D and Fundenberger, JJ and Toth, LS and Grosdidier, T (2012) Equal channel angular pressing processing routes and associated structure modification: a differential scanning calorimetry and X-ray line profile analysis. In: Powder Diffraction, 27 (3). pp. 194-199.

Gore, P and Gosain, OP and Singh, MP and Basu, B and Chattopadhyay, K (2022) Towards Understanding the Oxide Evolution in Inconel 740H and Haynes 282 in Ambient Pressure Steam Oxidation. In: Oxidation of Metals .

Gore, P and Singh, MP and Suryateja, D and Basu, B and Chattopadhyay, K (2023) Early-stage corrosion of IN 740H alloy in eutectic NaCl-KCl molten salt at high temperatures. In: Solar Energy, 252 . pp. 330-341.

Gornerup, M and Lahiri, AK (1998) Reduction of electric are furnace slags in stainless steelmaking - Part 1 Observations. In: Ironmaking and Steelmaking, 25 (4). pp. 317-322.

Gornerup, M and Lahiri, AK (1998) Reduction of electric arc furnace slags in stainless steelmaking - Part 2 Mechanism of CrOx reduction. In: Ironmaking and Steelmaking, 25 (5). pp. 382-386.

Goswami, A and Kumar, S (2014) Failure of pyrolysis coils coated with anit-coking film in an ethylene cracking plant. In: ENGINEERING FAILURE ANALYSIS, 39 . pp. 181-187.

Goswami, Ankur and Umarji, AM and Madras, Giridhar (2010) Degradation Kinetics of Poly(HDDA-co-MMA). In: Journal of Applied Polymer Science, 117 (4). pp. 2444-2453.

Goswami, R and Banerjee, S and Chattopadhyay, K and Raychaudhuri, AK (1993) Superconductivity in rapidly quenched metallic systems with nanoscale structure. In: Journal of Applied Physics, 73 (6). pp. 2934-2940.

Goswami, R and Chattopadhyay, K (1996) Depression of melting point of multidomained bismuth in aluminum based metallic glass nanocomposites. In: Applied Physics Letters, 69 (7). pp. 910-912.

Goswami, R and Chattopadhyay, K (1995) Heterogeneous nucleation of nanometre-sized Bi particles embedded in a Zn matrix. In: Philosophical Magazine Letters, 72 (6). pp. 411-416.

Goswami, R and Chattopadhyay, K (1994) Microstructural developments in rapidly solidified monotectic alloys. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 163-167.

Goswami, R and Chattopadhyay, K (1994) Microstructural evolution and transformation pathways in the near monotectic Zn rich Zn-Bi alloys during rapid solidification. In: Acta Metallurgica et Materialia, 42 (2). pp. 383-393.

Goswami, R and Chattopadhyay, K (1996) The Solidification Behaviour of Bi Particles Embedded in an Al Matrix. In: Acta Materialia, 44 (6). pp. 2421-2429.

Goswami, R and Chattopadhyay, K (1995) The superheating and the crystallography of embedded Pb particles in f.c.c. Al, Cu and Ni matrices. In: Acta Metallurgica et Materialia, 43 (7). pp. 2837-2847.

Goswami, R and Chattopadhyay, K and Kim, WT and Cantor, B (1992) Heterogeneous nucleation of pb particles embedded in a Zn matrix. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (12). pp. 3207-3218.

Goswami, R and Chattopadhyay, K and Ryder, PL (1998) Melting of Pb particles embedded in Cu-Zn matrices. In: Acta Materialia, 46 (12). pp. 4257-4271.

Goswami, R and Ryder, P and Chattopadhyay, K (1999) The melting and solidification of nanoscale Bi particles embedded in a glassy and crystalline matrix. In: Philosophical Magazine Letters, 79 (7). 481-489 .

Goswami, Srubabati and Vishnudath, K N and Khan, Najimuddin (2019) Constraining the minimal type-III seesaw model with naturalness, lepton flavor violation, and electroweak vacuum stability. In: PHYSICAL REVIEW D, 99 (7). 075012-1.

Gowda, CC and Tromer, R and Chandravanshi, D and Pandey, P and Chattopadhyay, K and Galvao, DS and Tiwary, CS (2023) Two-dimensional manganese di-telluride based triboelectric nanogenerator. In: Nano Energy, 117 .

Gowda, CC and Tromer, R and Pandey, P and Chandravanshi, D and Chandra, A and Chattopadhyay, K and Galvao, DS and Tiwary, CS (2023) Magnetic behavior of two-dimensional manganese telluride. In: 2D Materials, 10 (4).

Gowda, Prarthana and Kumar, Praveen and Tripathi, Rahul and Misra, Abha (2014) Electric field induced ultra-high actuation in a bulk carbon nanotube structure. In: CARBON, 67 . pp. 546-553.

Gowda, Prarthana and Ramamurty, Upadrasta and Misra, Abha (2014) Tuning of the electro-mechanical behavior of the cellular carbon nanotube structures with nanoparticle dispersions. In: APPLIED PHYSICS LETTERS, 104 (10).

Goyal, A and Murty, BS and Ranganathan, S (1993) Crystallization studies on amorphous AI-Y-Ni and AI-Y-Cu alloys. In: Journal of Materials Science (full set), 28 (22). pp. 6091-6095.

Goyal, GK and Mukherjee, S and Mallik, RC and Vitta, S and Samajdar, I and Dasgupta, T (2019) High Thermoelectric Performance in Mg2(Si0.3Sn0.7) by Enhanced Phonon Scattering. In: ACS Applied Energy Materials, 2 (3). pp. 2129-2137.

Greve, MM and Das, B and Issac, I and Witte, R and Wang, D and Kruk, R and Hahn, H and Dasgupta, S (2021) Electric-Potential-Induced Complete Control of Magnetization in MnZnSb Metallic Ferromagnets. In: Advanced Electronic Materials, 7 (1).

Gugulothu, SB and Asthana, S and Homer-Vanniasinkam, S and Chatterjee, K (2023) Trends in Photopolymerizable Bioinks for 3D Bioprinting of Tumor Models. In: JACS Au, 3 (8). 2086 -2106.

Gugulothu, SB and Chatterjee, K (2023) Visible Light-Based 4D-Bioprinted Tissue Scaffold. In: ACS Macro Letters, 12 (4). pp. 494-502.

Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.

Gundewar, CS and Natarajan, KA and Nayak, UB and Satyanarayana, K (1990) Laboratory studies on ball wear in the grinding of a hematite-magnetite ore. In: International Journal of Mineral Processing, 29 (1-2). pp. 121-139.

Gunjal, V and Tiwary, CS and Chattopadhyay, K and Banerjee, D (2024) Intermetallic eutectics with gigapascal strength and enhanced ductility. In: Intermetallics, 168 .

Gupta, GS and Hind, G (2004) An Object-Oriented Modeling Approach in Materials Processing: Case Study of the Acheson and Carburizing Processes. In: Materials and Manufacturing Processes, 19 (2). pp. 221-242.

Gupta, GS and Litster, JD and White, ET and Rudolph, VR (1997) Nonwetting flow of a liquid through a packed bed with gas cross-flow. In: Metallurgical and Materials Transactions B, 28 (4). pp. 597-604.

Gupta, GS and Naveen, K (2007) Quantification of Liquid Holdup in the Dropping Zone of a Blast Furnace- A Cold Model Study. In: Metallurgical and Materials Transactions B, 38 (2). pp. 203-213.

Gupta, GS and Rajneesh, S and Rudolph, V and Singh, V and Sarkar, S and Litster, JD (2005) Mechanics of raceway hysteresis in a packed bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 36 (6). pp. 755-764.

Gupta, A and Khatirkar, RK and Kumar, A and Thool, KS and Bhibhanshu, N and Suwas, S (2021) Texture Development During Cold Rolling of a β-Ti Alloy: Experiments and Simulations. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Gupta, A and Shankar, G and Mahadule, D and Khatirkar, RK (2023) Correlation of Alpha Phase and Its Texture Stability in Heat-Treated Ti-6.5Al-4.4V-0.15Fe Alloy. In: Journal of Materials Engineering and Performance .

Gupta, A and Srivastava, C (2021) Assessment of the Nucleation and Growth Mechanism of Copper Electrodeposition Over Graphene Oxide. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (6). pp. 2522-2533.

Gupta, A and Srivastava, C (2022) Electrodeposition current density induced texture and grain boundary engineering in Sn coatings for enhanced corrosion resistance. In: Corrosion Science, 194 .

Gupta, A and Srivastava, C (2021) Kinetics and Thermodynamics of Metal Cluster Nucleation Over Graphene Oxide. [Book Chapter]

Gupta, A and Srivastava, C (2020) Microstructural, Morphological and Electrochemical Effects of Graphene Oxide Incorporation in Tin-Cobalt Composite Coatings. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4257-4273.

Gupta, A and Srivastava, C (2020) Nucleation and growth mechanism of tin electrodeposition on graphene oxide: A kinetic, thermodynamic and microscopic study. In: Journal of Electroanalytical Chemistry, 861 .

Gupta, A and Srivastava, C (2020) Single Atom Nucleation of Cobalt over Graphene Oxide: Theory and Experimental Study. In: Langmuir, 36 (27). pp. 7824-7834.

Gupta, A and Srivastava, C (2021) Temperature driven texture and grain boundary engineering of electrodeposited β-Sn coatings and its effect on the coating corrosion behaviour: Five-parameter grain boundary character distribution analysis study. In: Scripta Materialia, 196 .

Gupta, A and Srivastava, C (2021) Texture and grain boundary engineering in electrodeposited SnCu coatings and its effect on coating corrosion behaviour. In: Philosophical Magazine .

Gupta, A and Srivastava, C (2021) Texture and grain boundary engineering in electrodeposited SnCu coatings and its effect on coating corrosion behaviour. In: Philosophical Magazine, 101 . pp. 2036-2053.

Gupta, A and Verma, KK and Kumar, R and Perugu, CS and Prasad, M and Agrawal, S and Khatirkar, R (2022) Electron Backscattered Diffraction Analysis Across the Welded Interface of Post Weld Heat Treated 2205 Duplex Stainless-Steel and 316L Austenitic Stainless-Steel Dissimilar Weldment. In: Journal of Materials Engineering and Performance .

Gupta, Abhay and Srivastava, Chandan (2019) Enhanced corrosion resistance by SnCu-graphene oxide composite coatings. In: THIN SOLID FILMS, 669 . pp. 85-95.

Gupta, Abhay and Srivastava, Chandan (2018) Optimum amount of graphene oxide for enhanced corrosion resistance by tin-graphene oxide composite coatings. In: THIN SOLID FILMS, 661 . pp. 98-107.

Gupta, Aman and Khatirkar, Rajesh Kisni and Kumar, Amit and Thool, Khushahal and Bibhanshu, Nitish and Suwas, Satyam (2019) Microstructure and texture development in Ti-15V-3Cr-3Sn-3A1 alloy-Possible role of strain path. In: MATERIALS CHARACTERIZATION, 156 .

Gupta, Ankur and Tripathi, Garima and Basu, Bikramjit and Balani, Kantesh (2012) Dependence of Protein Adsorption on Wetting Behavior of UHMWPE-HA-Al2O3-CNT Hybrid Biocomposites. In: Journal of Minerals, 64 (4). pp. 506-513.

Gupta, D and Lahir, AK (1996) A water model study of the flow asymmetry inside a continuous slab casting mold. In: Metallurgical and Materials Transactions B, 27 (05). pp. 757-764.

Gupta, D and Lahiri, AK (1996) Cold model study of slag entrainment into liquid steel in continuous slab caster. In: Ironmaking and Steelmaking, 23 (4). 361-363 .

Gupta, D and Lahiri, AK (1992) Water Modeling Study Of The Jet Characteristics In A Continuous-Casting Mold. In: Steel Research, 63 (5). pp. 201-204.

Gupta, D and Subramaniam, S and Lahiri, AK (1991) Study Of Fluid-Flow And Residence-Time Distribution In A Continuous Slab Casting Mold. In: Steel Research, 62 (11). pp. 496-500.

Gupta, Dharmendr and Chakraborty, Snehasis and Lahiri, AK (1997) Asymmetry and oscillation of the fluid flow pattern in a continuous casting mould: A water model study. In: ISIJ International, 37 (7). pp. 654-658.

Gupta, Dharmendra and Lahir, AK (1996) Cold model study of the surface profile in a continuous slab casting mold: Effect of second phase. In: Metallurgical and Materials Transactions A, 27 (4). pp. 695-697.

Gupta, Dharmendra and Lahiri, AK (1994) Water-modeling study of the surface disturbances in continuous slab caster. In: Metallurgical and Materials Transactions A, 25 (2). pp. 227-233.

Gupta, GS and Ajmani, SK and Gordon, Y (2024) Process Concept for Scaling-Up and Plant Studies. [Book Chapter]

Gupta, GS and Bhattacharyya, S (2003) Liquid Holdup in Non-wetting Packing with Lateral Gas Injection. In: ISIJ International, 43 (12). pp. 1927-1935.

Gupta, GS and Chaudhuri, A and Kumar, PV (2002) Modelling, simulation, and graphical user interface for industrial gas carburising process. In: Materials Science and Technology, 18 (10). pp. 1188-1194.

Gupta, GS and Kitamura, S and Ariyama, T (2007) Recent advances in blast furnace modeling in India. In: Procs. Of 54th JSPS Meeting On Iron Making Practices,, June 2007 , New Haven, Connecticut.

Gupta, GS and Kumar, PV and Rudolph, VR and Gupta, M (2001) Heat-transfer model for the Acheson process. In: Metallurgical And Materials Transactions A, 32 (6). pp. 1301-1308.

Gupta, GS and Lakshminarasimha, S and Shrenik, M (2022) Quantitative Measurement of Powder Holdups in the Packed Beds. In: Transactions of the Indian Institute of Metals, 75 (2). pp. 381-395.

Gupta, Govind S and Naveen, K (2006) Cold model study of local liquid holdup in the dropping zone using x-ray. In: International Conference on Advances in Materials and Materials Processing ICAMMP 2006, 2006, India.

Gupta, Govind Sharan (2005) Prediction of cavity size in the packed bed systems using new correlations and mathematical model. Patent Number(s) WO 2005010218 A1. Patent Assignee(s) Council of Scientific and Industrial Research.

Gupta, H and Kapoor, R and Shinde, D and Makineni, SK (2024) Achieving ultra-high flow stress and hardness in a medium Mn stainless steel by the formation of strain-induced martensite and G-phase precipitates. In: Scripta Materialia, 241 .

Gupta, M and Surappa, MK (1995) Effect of Increase in Heterogeneous Nucleation Sites on the Aging Behavior of 6061/SiC Metal Matrix Composites. In: Materials Research Bulletin, 30 (8). pp. 1023-1030.

Gupta, M and Surappa, MK (1995) Effect of weight percentage of SiC particulates on the ageing behaviour of 6061/SiC metal matrix composites. In: Journal of Materials Science Letters, 14 (18). pp. 1283-1285.

Gupta, M and Surappa, MK and Qin, S (1997) Effect of interfacial characteristics on the failure-mechanism mode of a SiC reinforced Al based metal-matrix composite. In: Journal of Materials Processing Technology, 67 (1-3). pp. 94-99.

Gupta, M and Surappa, MK and Qin, S and Tham, LM (1998) Regarding the effect of aging heat treatment on the failure behaviour of a SiC reinforced Al based metal matrix composite. In: Indian Journal of Engineering and Materials Sciences, 5 (1). pp. 1-8.

Gupta, N and Sankaran, S and Woldesenbet, E and Kishore, * (2001) Studies on compressive failure features in syntactic foam material. In: Journal of Materials Science, 36 (18). pp. 4485-4491.

Gupta, N and Woldesenbet, E and Kishore, * (2002) Compressive fracture features of syntactic foams-microscopic examination. In: Journal of Materials Science (full set), 37 (15). pp. 3199-3209.

Gupta, Neha and Mukhopadhyay, Amartya and Pavani, K and Basu, Bikramjit (2012) Spark plasma sintering of novel ZrB2-SiC-TiSi2 composites with better mechanical properties. In: Materials Science and Engineering: A, 534 . pp. 111-118.

Gupta, Nikhil and Karthikeyan, CS and Sankaran, S and Kishore, * (1999) Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without Fibers. In: Materials Characterization, 43 (4). pp. 271-277.

Gupta, S and Hazra, R and Dukkipati, A (2020) Networked multi-agent reinforcement learning with emergent communication. In: Proceedings of the International Joint Conference on Autonomous Agents and Multiagent Systems, AAMAS, 19-13 May 2020, Virtual, Auckland, pp. 1858-1860.

Gupta, S and Samanta, MK and Raichur, AM (2010) Dual-Drug Delivery System Based on In Situ Gel-Forming Nanosuspension of Forskolin to Enhance Antiglaucoma Efficacy. In: AAPS PharmSciTech, 11 (1). pp. 322-335.

Gupta, S and Sindhu, S and Saravanan, S and Ramamurthy, PC and Madras, G (2016) Application of Polymer/Nanocomposites for Sensitive Electronic Device Packaging: Issues and Challenges Involved in Achieving Ultralow Barrier Property. [Book Chapter]

Gupta, SC and Lahiri, AK (1979) Heat conduction with a phase change in a cylindrical mould. In: International Journal of Engineering Science, 17 (4). pp. 401-407.

Gupta, SK and Gugulothu, SB and Ivanov, E and Suwas, S and Chatterjee, K (2024) Additive manufacturing of a low modulus biomedical Ti�Nb�Ta�Zr alloy by directed energy deposition. In: Bioprinting, 41 .

Gupta, SK and Patil, AP and Rathod, RC and Tandon, V and Gupta, A and Chavhan, J (2023) Influence of filler variation on microstructural evolution, mechanical and corrosion performance of Ti-stabilized 439 ferritic stainless steel. In: Materials Today Communications, 34 .

Gupta, SK and Shahidsha, N and Bahl, S and Kedaria, D and Singamneni, S and Yarlagadda, PKDV and Suwas, S and Chatterjee, K (2021) Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates. In: Journal of the Mechanical Behavior of Biomedical Materials, 119 .

Gupta, Sapna and Jacob, KT and Mahapatra, Manoj K and Lane, Jonathan and Pathak, Alok (2014) deciphering the discipline. In: AMERICAN CERAMIC SOCIETY BULLETIN, 93 (4). p. 56.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Covalent Grafting of Polydimethylsiloxane over Surface-Modified Alumina Nanoparticles. In: Industrial & Engineering Chemistry Research, 50 (11). pp. 6585-6593.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Mechanistic overview of the curing behavior of hydride terminated polydimethylsiloxane with allyl functionalized alumina by calorimetry and rheometry. In: Thermochimica Acta, 524 (1-2). pp. 74-79.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Synthesis and characterization of flexible epoxy nanocomposites reinforced with amine functionalized alumina nanoparticles: a potential encapsulant for organic devices. In: Polymer Chemistry , 2 (1). pp. 221-228.

Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2011) Synthesis and characterization of silicone polymer/functionalized mesostructured silica composites. In: Polymer Chemistry, 2 (11). pp. 2643-2650.

Gupta, Satyajit and Seethamraju, Sindhu and Ramamurthy, Praveen Chandrashekarapura and Madras, Giridhar (2013) Polyvinylbutyral based hybrid organic/inorganic films as a moisture barrier material. In: Industrial and Engineering Chemistry Research, 52 (12). pp. 4383-4394.

Gurao, N P and Suwas, Satyam (2017) Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (2). pp. 809-827.

Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2011) Deformation behaviour of commercially pure titanium at extreme strain rates. In: Acta Materialia, 59 (9). pp. 3431-3446.

Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2012) Texture evolution in high strain rate deformed Cu-10Zn alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 761-765.

Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.

Gurao, NP and Manivasagam, Geetha and Govindaraj, P and Asokamani, R and Suwas, Satyam (2013) Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (12). pp. 5602-5610.

Gurao, NP and Sethuraman, S and Suwas, Satyam (2011) Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel. In: Materials Science and Engineering A, 528 (25-26). pp. 7739-7750.

Gurao, NP and Sethuraman, S and Suwas, Satyam (2013) Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (3). pp. 1497-1507.

Gurao, NP and Suwas, Satyam (2013) Deformation behaviour at macro- and nano-length scales: The development of orientation gradients. In: Materials Letters, 99 . pp. 81-85.

Gurao, NP and Suwas, Satyam (2009) Deformation mechanisms during large strain deformation of nanocrystalline nickel. In: Applied Physics Letters, 94 (19). 191902-1-191902-3.

Gurao, NP and Suwas, Satyam (2011) Evolution of crystallographic texture during deformation of submicron grain size titanium. In: Journal of Materials Research, 26 (4). pp. 523-532.

Gurao, NP and Suwas, Satyam (2014) Generalized scaling of misorientation angle distributions at meso-scale in deformed materials. In: SCIENTIFIC REPORTS, 4 (5641).

Gurao, NP and Suwas, Satyam (2011) Texture evolution and operative mechanisms during large-strain deformation of nanocrystalline nickel. In: Philosophical Magazine, 91 (5). pp. 798-817.

Gurao, Nilesh and Suwas, Satyam and Kapoor, Rajeev (2009) Study of Texture Evolution at High Strain Rates in FCC Materials. In: 15th International Conference on Textures of Materials, 15th International Conference on Textures of Materials, Pittsburgh, PA, pp. 73-81.

Gurao, Nilesh P and Ashkar, Ali A and Suwas, Satyam (2009) Study of texture evolution in metastable beta-Ti alloy as a function of strain path and its effect on alpha transformation texture. In: Materials Science and Engineering: A, 504 (1-2). pp. 24-35.

Gurao, Nilesh P and Kapoor, Rajeev and Suwas, Satyam (2010) Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2794-2804.

Gururajan, MP and Abinandanan, TA (2001) Correlation between bond energies and point-defect behaviour in B2 intermetallics. In: Philosophicul Muguzine A, 81 (12). pp. 2785-2795.

Gururajan, MP and Abinandanan, TA (2000) Mean field theory of point defects in $\beta -NiAl$. In: Intermetallics, 8 (7). pp. 759-767.

Gururajan, MP and Abinandanan, TA (2006) Microstructural evolution in elastically inhomogeneous systems: I. A phase field formulation. [Preprint]

Gururajan, MP and Abinandanan, TA (2006) Microstructural evolution in elastically inhomogeneous systems: II. Application to rafting. [Preprint]

Gururajan, MP and Abinandanan, TA (2007) Phase inversion in two-phase solid systems driven by an elastic modulus mismatch. In: Philosophical Magazine, 87 (33). pp. 5279-5288.

Gururajana, MP and Abinandanan, TA (2007) Phase field study of precipitate rafting under a uniaxial stress. In: Acta Materialia, 55 (15). pp. 5015-5026.

Guruvenket, S and Komath, Manoj and Vijayalakshmi, SP and Raichur, AM and Rao, Mohan G (2003) Wettability enhancement of polystyrene with electron cyclotron resonance plasma with argon. In: Journal of Applied Polymer Science, 90 (6). pp. 1618-1623.

Guruvenket, S and Rao, Mohan G and Komath, Manoj and Raichur, Ashok M (2004) Plasma surface modification of polystyrene and polyethylene. In: Applied Surface Science, 236 (1-4). pp. 278-284.

Gutta, B and Huilgol, P and Perugu, CS and Kumar, G and Reddy, ST and Toth, LS and Bouaziz, O and Kailas, SV (2024) A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility. In: Materials, 17 (1).

H

Hadagalli, K and Panda, AK and Mandal, S and Basu, B (2019) Faster Biomineralization and Tailored Mechanical Properties of Marine-Resource-Derived Hydroxyapatite Scaffolds with Tunable Interconnected Porous Architecture. In: ACS Applied Bio Materials, 2 (5). pp. 2171-2184.

Haeming, M and Baby, Tessy Theres and Garlapati, SK and Krause, B and Hahn, H and Dasgupta, S and Weinhardt, L and Heske, C (2017) The effect of NaCl on room-temperature-processed indium oxide nanoparticle thin films for printed electronics. In: APPLIED SURFACE SCIENCE, 396 . pp. 912-919.

Hajra, JP (1987) A new formalism for representation of heat capacities of metals. In: Bulletin of Materials Science, 9 (3). pp. 241-247.

Hajra, JP and Ray, T and Acharya, S (2005) Thermodynamics and adsorption behaviour of the nano phases in the bi-sn system. In: Journal of Computational and Theoretical Nanoscience, 2 (2). pp. 319-327.

Hajra, JP and Venkatraman, M and Ranganathan, S (1986) Thermodynamics and phase equilibria in the Co-Ni-Mn system. In: Transactions of the Indian Institute of Metals, 39 (3). pp. 211-218.

Hajra, Jnan P and Aldinger, Fritz and Seifert, Hans J (2003) Derivation and applicability of the partial functions of the ternary system using interaction coefficients. In: Steel GRIPS, 1 (5). pp. 353-360.

Hajra, JP (1991) Representation of Excess Thermodynamic Properties of Ternary Systems Using Interaction Parameters. In: Metallurgical and Materials Transactions B, 22 (5). pp. 583-591.

Hajra, JP (1989) Thermodynamic consistency of the ternary functions. In: Metallurgical and Materials Transactions A, 20 (10). pp. 2047-2055.

Hajra, JP (1979) Thermodynamics of Cu---Mn alloys. In: Scripta Metallurgica, 13 (3). pp. 173-175.

Hajra, JP (1980) A new formalism for representation of binary thermodynamic data. In: Metallurgical and Materials Transactions B, 11 (2). pp. 215-219.

Hajra, JP and Divakar, M (1996) Applicability of Butler's equation in interpreting the thermodynamic behavior of surfaces and adsorption in Fe-S-O melts. In: Metallurgical and Materials Transactions A, 27 (2). pp. 241-253.

Hajra, JP and Divakar, M (1999) Thermodynamics of surfaces and adsorption in the Fe-S, Fe-N, and Fe-S-N systems at 1823 K. In: Metallurgical and Materials Transactions A, 30 (3). pp. 429-433.

Hajra, JP and Jayaganthan, R and Divakar, M (1997) Representation of thermodynamic properties of quaternary systems using interaction parameters. In: Steel Research, 68 (9). pp. 375-382.

Hajra, JP and Lee, Hong-Kee and Frohberg, Martin G (1992) Representation of thermodynamic properties of ternary systems and its application to the system silver-gold-copper at 1350 K. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (6). pp. 747-752.

Hajra, JP and Mazumdar, B (1991) Thermodynamics of Binary Systems using Interaction Parameters. In: Metallurgical and Materials Transactions B, 22 (5). pp. 593-605.

Hajra, JP and Rajasekharam, P (1993) Thermodynamics of surfaces and adsorption in binary metallic systems. In: Scripta Metallurgica et Materialia, 29 (10). pp. 1297-1302.

Hajra, JP and Reddy, Ravindra S and Frohberg, MG (1995) Derivation and consistency of the partial functions of the ternary system involving interaction coefficients. In: Metallurgical and Materials Transactions B, 26 (3). pp. 495-502.

Hajra, JP and Sinha, AK (1987) Applicability of various formalisms in interpretation of thermodynamic properties and phase equilibria in Zn-based systems. In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 11 (3). pp. 247-252.

Hajra, Jnan P and Frohberg, Martin G (1992) Integral treatment for the representation of thermodynamic properties in multicomponent systems using interaction parameters. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 23-28.

Hanabe, Murali and Jayaram, Vikram and Bhaskaran, TA (1996) Growth of $Al_2O_3/Al$ Composites from Al-Zn Alloys. In: Acta Materialia, 44 (2). pp. 819-829.

Hareesh, K and Rondiya, SR and Dhole, SD and More, MA and Phase, DM (2022) Development of CoFe2O4 scaffolded reduced graphene oxide/carbon nanotube emitter for field emission application. In: Optical Materials, 134 .

Hariharan, VS and Nithin, B and Ruban Raj, L and Makineni, SK and Murty, BS and Phanikumar, G (2023) Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion. In: Crystals, 13 (5).

Harshavardhan, Solomon K and Yalamanchi, RS and Rao, Kameswara L (1989) Formation of crystalline diamond from amorphous diamond-like carbon films by pulsed laser irradiation. In: Applied Physics Letters, 55 (4). pp. 351-353.

Hasan, J and Roy, A and Chatterjee, K and Yarlagadda, PKDV (2019) Mimicking Insect Wings: The Roadmap to Bioinspiration. In: ACS Biomaterials Science and Engineering, 5 (7). pp. 3139-3160.

Hasan, Jafar and Chatterjee, Kaushik (2015) Recent advances in engineering topography mediated antibacterial surfaces. In: NANOSCALE, 7 (38). pp. 15568-15575.

Hasan, Jafar and Jain, Shubham and Chatterjee, Kaushik (2017) Nanoscale Topography on Black Titanium Imparts Multi-biofunctional Properties for Orthopedic Applications. In: SCIENTIFIC REPORTS, 7 .

Hasan, Jafar and Jain, Shubham and Padmarajan, Rinsha and Purighalla, Swathi and Sambandamurthy, Vasan K and Chatterjee, Kaushik (2018) Multi-scale surface topography to minimize adherence and viability of nosocomial drug-resistant bacteria. In: MATERIALS & DESIGN, 140 . pp. 332-344.

Hasan, Jafar and Raj, Shammy and Yadav, Lavendra and Chatterjee, Kaushik (2015) Engineering a nanostructured ``super surface'' with superhydrophobic and superkilling properties. In: RSC ADVANCES, 5 (56). pp. 44953-44959.

Hashim, Mohd and Alimuddin, * and Shirsath, Sagar E and Kumar, Shalendra and Kumar, Ravi and Roy, Aashis S and Shah, Jyoti and Kotnala, RK (2013) Preparation and characterization chemistry of nano-crystalline Ni-Cu-Zn ferrite. In: JOURNAL OF ALLOYS AND COMPOUNDS, 549 . pp. 348-357.

Hazra, M and Mondal, AK and Kumar, S and Blawert, C and Dahotre, Narendra B (2009) Laser surface cladding of MRI 153M magnesium alloy with (Al+Al2O3). In: Surface and Coatings Technology, 203 (16). pp. 2292-2299.

He, J and Li, N and Makineni, SK and Zhao, Y and Liu, W and Wang, L and Wang, Z and Song, M (2022) Effects of minor Nb alloying on the thermal stability and mechanical responses of a γ/γ′ type high-entropy alloy with high Fe content. In: Materials Science and Engineering A, 851 .

He, J and Wu, X and Guo, Y and Makineni, SK (2021) On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy. In: Scripta Materialia, 194 .

Hebsur, MG and Abraham, KP and Prasad, YVRK (1980) Hot-Working Characteristics of Electroslag-Refined En52 Steel: A Hot-Torsion Study. In: Metals Technology, 7 (DEC). pp. 483-487.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel. In: Engineering Fracture Mechanics, 13 (4). pp. 851-864.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel. In: International Journal of Fatigue, 2 (4). pp. 147-152.

Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1981) Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion. In: Journal of Mechanical Working Technology, 4 (4). pp. 341-349.

Hegde, MS and Kumar, Sampath TS and Mallya, RM (1983) A Study Of Surface Segregation And Oxidation Of Cu-Mn Alloys By X-Ray Photoelectron And Auger Spectroscopy. In: Applications of Surface Science, 17 (1). pp. 97-106.

Hegde, MS and Kumar, Sampath TS and Mallya, RM (1987) XPS, UPS and AES study of surface segregation and oxidation of nickel-ruthenium alloy: evidence for decrease in dissociation temperature of nickel oxide in the presence of ruthenium. In: Surface Science, 188 (1-2). pp. 255-66.

Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial $LaNiO_3$ thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.

Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial LaNiO3 thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.

Hegde, MS and Satyalakshmi, KM and Ramesh, S and Vasanthacharya, NY and Gopalakrishnan, J (1992) New defect-perovskite oxides related to the yttrium-barium-copper oxide superconductor. In: Materials Research Bulletin, 27 (9). pp. 1099-1106.

Hemam, R and Solanki, V and Nanda, KK (2019) ZnO hybrid microstructures as dark catalyst. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.

Hemambar, C and Rao, Srinivasa B and Jayaram, V (2001) Al-SiC electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration. In: Materials and Manufacturing Processes, 16 (6). pp. 779-788.

Hemaprabha, Elangovan and Pandey, Upendra K and Chattopadhyay, Kamanio and Ramamurthy, Praveen C (2018) Doped silicon nanoparticles for enhanced charge transportation in organic-inorganic hybrid solar cells. In: SOLAR ENERGY, 173 . pp. 744-751.

Hemavathi, B and Jayadev, V and Pradhan, Sourava C. and Gokul, G and Jagadish, Kusuma and Chandrashekara, GK and Ramamurthy, Praveen C and Pai, Ranjith Krishna and Unni, Narayanan KN and Ahipa, TN and Soman, Suraj and Balakrishna, Geetha R (2018) Aggregation induced light harvesting of molecularly engineered D-A-pi-A carbazole dyes for dye-sensitized solar cells. In: SOLAR ENERGY, 174 . pp. 1085-1096.

Hemavathi, B and Jayadev, V and Ramamurthy, Praveen C and Pai, Ranjith Krishna and Unni, Narayanan K N and Ahipa, T N and Soman, Suraj and Balakrishna, R Geetha (2019) Variation of the donor and acceptor in D-A-pi-A based cyanopyridine dyes and its effect on dye sensitized solar cells. In: NEW JOURNAL OF CHEMISTRY, 43 (39). pp. 15673-15680.

Hemavathi, B and Kesavan, Arul Varman and Chandrashekara, GK and Ramamurthy, Praveen C and Pai, Ranjith Krishna and Ahipa, TN and Balakrishna, Geetha R (2018) Polycondensation of thiophene-flanked cyanopyridine and carbazole via direct arylation polymerization for solar cell application. In: REACTIVE & FUNCTIONAL POLYMERS, 133 . pp. 1-8.

Herath, I and Davies, J and Will, G and Tran, PA and Velic, A and Sarvghad, M and Islam, M and Paritala, PK and Jaggessar, A and Schuetz, M and Chatterjee, K and Yarlagadda, PKDV (2022) Anodization of medical grade stainless steel for improved corrosion resistance and nanostructure formation targeting biomedical applications. In: Electrochimica Acta, 416 .

Herlekar, Ipsita and Prakash, Megha (2014) Android apps to aid wildlife research. UNSPECIFIED.

Hijazi, F and Pavan, AHV and Jayaram, V and Kumar, P (2024) Material volume reduction for creep testing using composite cantilevers and its application for residual life assessment. In: Materials Science and Engineering: A, 918 .

Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .

Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .

Hijazi, Faizan and Kar, Jyotirmaya and Pavan, A H V and Singh, Kulvir and Kumar, Praveen and Jayaram, Vikram (2019) Application of bending creep for examining effect of service conditions on creep response of steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 766 .

Hines, JA and Ikuhara, Y and Chokshi, AH and Sakuma, T (1998) The influence of trace impurities on the mechanical characteristics of a superplastic 2 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (15). pp. 5557-5568.

Hirota, K and Saito, F and Jacob, KT and Waseda, Y and Okabe, TH (1999) Electrochemical deoxidation of RE–O (RE=Gd, Tb, Dy, Er) solid solutions. In: Journal of Alloys and Compounds, 282 (1-2). pp. 101-108.

Honnappa, N and Anil, AG and Shekar, S and Behera, SK and Ramamurthy, PC (2022) Design of a Highly Selective Benzimidazole-Based Derivative for Optical and Solid-State Detection of Zinc Ion. In: Inorganic Chemistry .

Hoque, Manjura S and Makineni, SK and Pal, A and Ayyub, P and Chattopadhyay, K (2014) Structural and magnetic properties of ultra-small scale eutectic CoFeZr alloys. In: JOURNAL OF ALLOYS AND COMPOUNDS, 620 . pp. 442-450.

Hoque, Manjura S and Srivastava, C and Kumar, V and Venkatesh, N and Das, HN and Saha, DK and Chattopadhyay, K (2013) Exchange-spring mechanism of soft and hard ferrite nanocomposites. In: Materials Research Bulletin, 48 (8). pp. 2871-2877.

Hoque, Manjura S and Srivastava, C and Srivastava, N and Venkateshan, N and Chattopadhyay, K (2013) Synthesis and characterization of Fe- and Co-based ferrite nanoparticles and study of the T-1 and T-2 relaxivity of chitosan-coated particles. In: JOURNAL OF MATERIALS SCIENCE, 48 (2). pp. 812-818.

Hoque, Manjura S and Srivastava, C and Venkatesha, N and Anil Kumar, PS and Chattopadhyay, K (2013) Superparamagnetic behaviour and T-1, T-2 relaxivity of ZnFe2O4 nanoparticles for magnetic resonance imaging. In: Philosophical Magazine, 93 (14). pp. 1771-1783.

Hoque, Manjura S and Srivastava, C and Venkatesha, N and Chattopadhyay, K (2013) Synthesis, Characterization, and Nuclear Magnetic Resonance Study of Chitosan-Coated Mn1-xZnxFe2O4 Nanocrystals. In: IEEE TRANSACTIONS ON NANOBIOSCIENCE, 12 (4). pp. 298-303.

Hoque, S Manjura and Kader, SS and Paul, DP and Saha, DK and Das, HN and Rana, MS and Chattopadhyay, K and Hakim, MA (2012) Effect of Grain Size on Structural and Magnetic Properties of CuFe2O4 Nanograins Synthesized by Chemical Co-Precipitation. In: IEEE TRANSACTIONS ON MAGNETICS, 48 (5, Par). pp. 1839-1843.

Hoque, S Manjura and Makineni, SK and Pal, A and Rahman, SA and Hossain, S and Islam, R and Ayyub, P and Chattopadhyay, K (2018) Two phase ferromagnetic composites in Co-Zr and Co-Zr-Fe systems containing anti-phase domain imparting very high strength. In: MATERIALS RESEARCH BULLETIN, 97 . pp. 61-70.

Horita, S and Patidar, J and Yagyu, H and Nogi, M (2017) Room-temperature deposition of a crystallized dielectric YSZ film on glass substrate covered with cellulose nanopaper. In: 24th International Display Workshops, IDW 2017, 6 - 8 December 2017, Sendai, pp. 1529-1530.

Hou, JG and Qu, YF and Vaish, R and Varma, KBR and Krsmanovic, D and Kumar, RV (2010) Crystallographic Evolution, Dielectric, and Piezoelectric Properties of Bi4Ti3O12:W/Cr Ceramics. In: Journal of the American Ceramic Society, 93 (5). pp. 1414-1421.

Hsieh, K and Kochat, V and Biswas, T and Tiwary, CS and Mishra, A and Ramalingam, G and Jayaraman, A and Chattopadhyay, K and Raghavan, S and Jain, M and Ghosh, A (2021) Spontaneous Time-Reversal Symmetry Breaking at Individual Grain Boundaries in Graphene. In: Physical Review Letters, 126 (20).

Huang, P-H and Rana, N and Gupta, A and Enjeti, P and Basu, K (2024) A New Integrated Onboard Battery Charger For Electric Scooters. In: 2024 IEEE International Communications Energy Conference, INTELEC 2024, 4 August 2024through 7 August 2024, Bengaluru.

Huang, Z and Kumar, P and Dutta, I and Pang, JHL and Sidhu, R (2014) A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks. In: ENGINEERING FRACTURE MECHANICS, 131 . pp. 9-25.

Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Effects of Microstructure and Loading on Fracture of Sn-3.8Ag-0.7Cu Joints on Cu Substrates with ENIG Surface Finish. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (12). pp. 4485-4496.

Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (1). pp. 88-95.

Huszar, E and Sharma, A and Székely, L and Raghavan, R and Putz, B and Edwards, TEJ and Spolenak, R and Michler, J and Pethö, L (2023) Synthesis and mechanical properties of co-deposited W nanoparticle and ZrCuAg metallic glass thin film composites. In: Thin Solid Films, 773 .

Hémery, S and Villechaise, P and Banerjee, D (2020) Microplasticity at Room Temperature in α/β Titanium Alloys. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (10). pp. 4931-4969.

I

Ilangovan, S and Vasu, KI (1986) Electro-hydrometallurgy of chalcopyrites - VII. An appraisal of ferric chloride leaching process. In: Bulletin of Electrochemistry, 2 (6). pp. 611-613.

Illarionov, AG and Karabanalov, MS and Shabanov, MA and Stepanov, SI and Soundappan, P and Raman, KHT and Suwas, S (2024) Structure and Properties of the Powder for Additive Synthesis of Alloys Based on Titanium Aluminide TiAl. In: Metal Science and Heat Treatment .

Illarionov, AG and Stepanov, SI and Naschetnikova, IA and Popov, AA and Soundappan, P and Thulasi Raman, KH and Suwas, S (2023) A Review—Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb. In: Materials, 16 (3).

Im, HJ and Makineni, SK and Oh, CS and Gault, B and Choi, P-P (2021) Elemental Sub-Lattice Occupation and Microstructural Evolution in γ / γ � Co-12Ti-4Mo-Cr Alloys. In: Microscopy and Microanalysis .

Indrajith Naik, E and Sunil Kumar Naik, TS and Pradeepa, E and Singh, S and Naik, HSB (2022) Design and fabrication of an innovative electrochemical sensor based on Mg-doped ZnO nanoparticles for the detection of toxic catechol. In: Materials Chemistry and Physics, 281 .

Indrakumar, S and Dash, TK and Mishra, V and Tandon, B and Chatterjee, K (2023) Silk Fibroin and Its Nanocomposites for Wound Care: A Comprehensive Review. In: ACS Polymers Au .

Indrakumar, S and Ghosh, S and Dash, TK and Mishra, V and Tandon, B and Chatterjee, K (2023) Silk composite interfacial layer eliminates rebleeding with chitosan-based hemostats. In: Carbohydrate Polymers, 304 .

Indrakumar, S and Gugulothu, SB and Joshi, A and Dash, TK and Mishra, V and Tandon, B and Chatterjee, K (2024) Silk Composite-Based Multifunctional Pellets for Controlled Release. In: Macromolecular Bioscience .

Indrakumar, S and Joshi, A and Dash, TK and Mishra, V and Tandon, B and Chatterjee, K (2023) Photopolymerized silk fibroin gel for advanced burn wound care. In: International Journal of Biological Macromolecules, 233 .

Indrakumar, S and Panicker, AT and Parasuram, S and Joshi, A and Kumar Dash, T and Mishra, V and Tandon, B and Chatterjee, K (2023) 3D-printed ultra-stretchable silk fibroin-based biocompatible hydrogels. In: Bioprinting, 36 .

Ingale, T and Sen, M and Verma, KK and Godha, A and Reddy, ST and Balachandran, S and Suwas, S and Venkatesh, V and Banerjee, D (2024) Exploring microcrack formation in cyclic and dwell fatigue in MTR-lean Ti 6242 alloy. In: Acta Materialia, 281 .

Irzhak, A and Koledov, V and Zhuravleva, T and Kumar, P (2019) Melting of metall nano particles for nanoassembling. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8, August 2019, Zhenjiang; China, pp. 78-81.

Islam, SS and Jose, T and Seikh, AH and Karim, MR and Alnaser, IA and Bose, S (2024) Shear-aligned graphene oxide nanosheets incorporated PVDF composite membranes for selective dye rejection with high water flux. In: RSC Advances, 14 (38). pp. 27852-27861.

Iswarya, V and Bhuvaneshwari, M and Alex, Sruthi Ann and Iyer, Siddharth and Chaudhuri, Gouri and Chandrasekaran, Prathna Thanjavur and Bhalerao, Gopalkrishna M. and Chakravarty, Sujoy and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2015) Combined toxicity of two crystalline phases (anatase and rutile) of Titania nanoparticles towards freshwater microalgae: Chlorella sp. In: AQUATIC TOXICOLOGY, 161 . pp. 154-169.

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of Al2O3 fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (9). pp. 1781-1789.

Iwasaki, I and Pozzo, RL and Natarajan, KA and Adam, K and Orlich, JN (1988) Nature of corrosive and abrasive wear in ball mill grinding. In: International Journal of Mineral Processing, 22 (1-4). pp. 345-360.

Iwase, M and Ichise, E and Jacob, KT (1984) Mixed ionic and electronic conduction in zirconia and its applications in metallurgy. In: Proc. Zirconia 83, Advances in Ceramics Series, 1984, pp. 646-659.

Iwase, M and Ichise, E and Jacob, KT (1986) Physical chemistry of mixed conducting zirconia ceramics. In: Sprechsaal, 119 (4). 280 -283.

Iwase, M and Jacob, KT (1982) Some recent developments in solid state galvanic sensors. In: Proceedings of the Symposium on High Temperature Materials Chemistry, 1982, Pennington, N.J., U.S.A.

Iyengar, GNK and Balasubramanya, R and Jacob, KT (1997) A phenomenological treatment of cation distribution in spinels: System (Ni(1-x)Alx)(t)[NixAl2-x](0) O-4. In: High Temperature Materials And Processes, 16 (1). pp. 39-48.

Iyengar, GNK and Abraham, KP and Raghavan, S (1985) Determination of the thermodynamic properties of xMgO + (1 x)MnO (s, sln) from a solid-electrolyte galvanic cell in the temperature range 1163 to 1318 K. In: The Journal of Chemical Thermodynamics, 17 (6). pp. 585-591.

Iyer, Anantha GV and Vasudev, VN (1985) Copper metallogeny in the Jogimardi volcanics, Chitradurga greenstone belt. In: Journal of the Geological Society of India, 26 (8). pp. 580-598.

Izza Taib, Nurul and Agarwal, Vipul and Smith, Nicole M and Woodward, Robert C and St. Pierre, Timothy G and Iyer, K. Swaminathan (2017) Direct correlation of PNIPAM thermal transition and magnetic resonance relaxation of iron oxide nanoparticles. In: Materials Chemistry Frontiers, 1 (11). pp. 2335-2340. ISSN 2052-1537

J

Jacob, KT (1986) Solubility and activity of oxygen in liquid nickel in equilibrium with $\alpha -Al_2o_3$Nio.(1 + x)$Al_2o_3$. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17B (4). pp. 763-70.

Jacob, KT and Behera, CK (2000) Equilibria involving the reciprocal spinel solid solution (MgxFe1-x)(AlyCr1-Y)(2)O-4: Modeling and experiment. In: Metallurgical and Materials Transactions B, 31 (06). pp. 1247-1259.

Jacob, KT and Hajra, JP (1986) Electromagnetic levitation study of sulfur in liquid iron, nickel, and iron-nickel alloys. In: Transactions of the Indian Institute of Metals, 39 (1). pp. 62-69.

Jacob, KT and Hajra, JP (1987) Measurement of Gibbs energies of formation of $CoF_2$, and $MnF_2$, using a new composite dispersed solid electrolyte. In: Bulletin of Materials Science, 9 (1). pp. 37-46.

Jacob, KT and Hajra, JP and Iwase, M (1984) Activities Of Mn In Solid And Liquid Fe-Mn Alloys. In: Archiv Fur Das Eisenhuttenwesen, 55 (9). pp. 421-426.

Jacob, KT and Hoque, SM and Waseda, Y (2000) Solute-solute and solute-solvent interactions in transition metal alloys : Pt-Ti system. In: Materials science and technology, 16 (4). pp. 364-371.

Jacob, KT and Hoque, SM and Waseda, Y (1998) Strong solute-solvent interactions in the systems Mg-Pd and Al-Pd: manifestation of charge transfer and s-p-d hybridization. In: Zeitschrift fur Metallkunde, 89 (7). pp. 487-493.

Jacob, KT and Iwase, M (1983) Effect of pressure on the emf of solid-state cells. In: High Temperature Science, 16 (2). pp. 123-129.

Jacob, KT and Iyengar, GNK and Kim, WK (1986) Spinel-Corundum Phase Equilibria in the Systems Mn-Cr-Al-O and Co-Cr-Al-O at 1373 K. In: Journal of the American Ceramic Society, 69 (6). pp. 487-492.

Jacob, KT and Lwin, KT and Waseda, Y (2001) System Pr-Pd-O: Phase diagram and thermodynamic properties of ternary oxides using solid-state cells with special features. In: Zeitschrift Fur Metallkunde, 92 (7). pp. 731-739.

Jacob, KT and Okabe, TH and Uda, T and Waseda, Y (1999) Determination of thermodynamic properties of $Ca_{4}PtO_{6}$ and $CaPtO_{3}$ using solid state cells with buffer electrodes. In: Zeitschrift Fur Metallkunde, 90 (7). pp. 491-498.

Jacob, KT and Priya, S and Waseda, Y (2000) Measurement of the Activity of Boron in Liquid Copper using a Four-Phase Equilibrium Technique. In: Metallurgical and Materials Transactions A, 31 (10). pp. 2674-2678.

Jacob, KT and Priya, S and Waseda, Y (1998) Thermodynamic Mixing Properties and Solid-State Immiscibility in the Systems Pd-Rh and Pd-Rh-O. In: Journal of Phase Equilibria, 19 (4). pp. 340-350.

Jacob, KT and Saji, VS (2006) Interaction between $Ni/NiO$ and $PbTiO_3$: Phase Reversal with Redox Switching. In: Journal of Phase Equilibria & Diffusion, 27 (5). pp. 456-461.

Jacob, KT and Saji, VS and Waseda, Y (2006) Activity of $TiO_2$ in the system $ZrO_2-TiO_2$ and Gibbs energy of formation of $ZrTiO_4$. In: High Temperature Materials and Processes, 25 (4). pp. 203-208.

Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of $Pb_2Ru_2O_{6.5}$. In: Journal of Materials Research, 22 (5). pp. 1174-1181.

Jacob, KT and Shukla, AK and Akila, Ramachandran and Kale, GM (1986) Gibbs' energy of formation of nickel orthosilicate $(Ni_2SiO_4)$. In: High Temperature Materials and Processes, 7 (2-3). pp. 141-148.

Jacob, Thomas K and Seetharaman, Seshadri (1996) Phase Equilibria, Oxygen Potentials, and Activities in the System Ni-Co-Si-O at 1373 K. In: Journal of the American Ceramic Society, 79 (11). pp. 2815-2820.

Jacob, Thomas K and Hoque, Manjura S and Waseda, Yoshio (2000) Synergistic Use of Thermogravimetric and Electrochemical Techniques for Thermodynamic Study of $TiO_x$ (1.67≤ x≤ 2.0) at 1573 K. In: Materials Transactions, JIM, 41 (6). pp. 681-689.

Jacob, Thomas K and Pandit, Shashidhara S (1988) Characterization of Alloy-Spinel-Corundum Equilibrium in the System Fe-Ni-Al-O. In: Transactions of the Iron and Steel Institute of Japan, 28 (2). pp. 91-96.

Jacob, Thomas K and Pandit, Shashidhara S (1987) Spinel deoxidation equilibrium in the cobalt-manganese-aluminum-oxygen system: Experiment and modeling. In: International Journal for Materials Research/Zeitschrift für Metallkunde, 78 (9). pp. 652-656.

Jacob, Thomas K and Waseda, Yoshio (1998) Solid-State Immiscibility and Thermodynamics of the Calcium Oxide-Strontium Oxide System. In: Journal of the American Ceramic Society, 81 (4). pp. 1065-1068.

Jacob, K T and Kothawade, Prajakta (2019) Thermodynamic properties of YRhO3 and phase relations of the system Y-Rh-O. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 245 . pp. 47-54.

Jacob, K T and Ramesh, Sankaran (2017) Thermodynamic stability of LuRhO3 in a photoelectrochemical cell. In: JOURNAL OF ALLOYS AND COMPOUNDS, 695 . pp. 1891-1899.

Jacob, K Thomas and Shekhar, Chander and Waseda, Yoshio (2008) Thermodynamic Properties and Phase Diagram for the System MoO2–TiO2. In: Journal of the American Ceramic Society, 91 (2). pp. 563-568.

Jacob, KT (1982) Activity of manganese in liquid Ni Mn alloys. In: Metallurgical and Materials Transactions B, 13 (2). pp. 283-285.

Jacob, KT (1985) Application of solid state cells to alloy thermodynamics - critical factors and emerging frontiers. In: Thermodynamics and Kinetics of Metallurgical Processes, 1985, Calcutta.

Jacob, KT (1986) Casting of titanium and titanium alloys. In: Defence Science Journal, 36 (2). pp. 121-141.

Jacob, KT (1979) Correlations between structure and thermodynamic properties of spinels and their applications in technology. In: Transactions of the Indian Institute of Metals, 32 . pp. 470-484.

Jacob, KT (1995) Determination of the Gibbs energy of diamond using a solid state cell. In: Solid State Communications, 94 (9). pp. 763-765.

Jacob, KT (1997) Discussion of "use of solid electrolyte galvanic cells to determine the activity of CaO in the $CaO-ZrO_2$ system and standard Gibbs free energies of formation of $CaZrO_3$ from CaO and $ZrO_2$". In: Metallurgical And Materials Transactions B, 28 (4). pp. 723-725.

Jacob, KT (2016) Discussion of ``Determination of Activities of Niobium in Cu-Nb Melts Containing Dilute Nb''. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 47 (2). pp. 834-835.

Jacob, KT (1978) Electrochemical determination of activities in Cr2O3 Al2O3 solid solutions. In: Journal of the Electrochemical Society, 125 . pp. 175-179.

Jacob, KT (1976) Gibbs free energies of formation of ZnAl2O4 and ZnCr2O4. In: Thermochimica Acta, 15 (1). pp. 79-87.

Jacob, KT (1978) Gibbs free energies of formation of indium (III) oxide and sulphate. In: Transactions of the Institution of Mining and Metallurgy, 87 . C165-C169.

Jacob, KT (1995) Gibbs free energy of Ca3Si2O7—a reassessment of electromotive force measurements. In: Metallurgical and Materials Transactions B, 26 (3). pp. 658-660.

Jacob, KT (1980) Isothermal section of the Ni Co S phase diagram at 1273 K. In: Metallurgical and Materials Transactions B, 11 (4). pp. 640-643.

Jacob, KT (1987) Kinetics of Sulphation of Nickel and Cobalt Ferrites with Na$O, Melt Containing F'e3+ Ions. In: Transactions of the Indian Institute of Metals, 40 (5). pp. 383-388.

Jacob, KT (1987) Kinetics of sulfation of nickel and cobalt ferrites with sodium sulfate melt containing iron(3+) ions. In: Transactions of Indian Institute of Metals, 40 (2). pp. 383-388.

Jacob, KT (1987) Mechanism of enhanced corrosion of alumina graphite refractories near slag/metal interface. In: Tool and Alloy Steels, 21 (12). pp. 477-480.

Jacob, KT (1980) Phase relationships in the system Cr W O and thermodynamic properties of CrWO4 and Cr2WO6. In: Journal of Materials Science, 15 (9). pp. 2167-2174.

Jacob, KT (1977) Phase relationships in the system Ni-W-O and thermodynamic properties of NiWO,. In: Journal of Meterials Science, 12 (8). pp. 1647-1652.

Jacob, KT (1977) Potentiometric determination of the Gibbs free energy of formation of cadmium and magnesium chromites. In: Journal of the electrochemical society, 124 (12). pp. 1827-1831.

Jacob, KT (1981) Revision of thermodynamic data on MnO Al2O3 melts. In: Canadian Metallurgical Quarterly, 20 (1). pp. 89-92.

Jacob, KT (1981) Solubility and activity of oxygen in liquid manganese. In: Journal of the Minerals Metals & Materials Society, 12 (4). pp. 675-678.

Jacob, KT (1986) Solubility and activity of oxygen in liquid nickel in equilibrium with -Al2O3 and NiO.(1+x)Al2O3. In: Metallurgical and Materials Transactions B, 17 (4). pp. 763-770.

Jacob, KT (1975) The electronic structure of the alloying element and the stability of the gamma phase in iron alloys. In: Journal of Materials Science, 10 (6). pp. 1090-1092.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system $PbO-RuO_2-TiO_2$. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Jacob, KT and Abraham, KP (2009) Thermodynamic properties of calcium titanates: CaTiO3, Ca4Ti3O10, and Ca3Ti2O7. In: The Journal of Chemical Thermodynamics, 41 (6). pp. 816-820.

Jacob, KT and Abraham, KP and Ramachandran, S (1990) Gibbs energies of formation of intermetallic phases in the systems Pt Mg, Pt Ca and Pt Ba and some applications. In: Metallurgical and Materials Transactions B, 21B (3). pp. 521-527.

Jacob, KT and Adharsh, R (2012) Thermodynamics of Congruent Oxidation. In: HIGH TEMPERATURE MATERIALS AND PROCESSES, 31 (4-5). pp. 395-403.

Jacob, KT and Adharsh, R (2011) A critique of the green house gas converter proposed by Azad. American Ceramics Society, 600 N CLEVELAND AVE, WESTERVILLE, OH 43082 USA, pp. 40-44.

Jacob, KT and Akila, R and Shukla, AK (1987) Oxygen Potentials for the Oxidation of Rare Earth Oxysulfides to Oxysulfates. In: Journal of Solid State Chemistry, 69 (1). pp. 109-115.

Jacob, KT and Alcock, CB (1977) Activities and their relation to cation distribution in NiAl2O4 MgAl2O4 spinel solid solutions. In: Journal of Solid State Chemistry, 20 (1). pp. 79-88.

Jacob, KT and Alcock, CB (1973) Activities of indium in solid solutions of Cu+In, Au+In and Cu+Au+In alloys. In: Acta Metallurgica, 21 (7). 1011-1016 .

Jacob, KT and Alcock, CB (1973) Discussion of "Measurement of vapor pressure of indium over Ag In using atomic absorption. In: Metallurgical and Materials Transactions B, 4 (10). pp. 2483-2484.

Jacob, KT and Alcock, CB (1975) Evidence of residual entropy in the cubic spinel Zn2TiO4. In: High Temperatures -High Pressures, 7 . pp. 433-439.

Jacob, KT and Alcock, CB (1972) Prediction of activities of oxygen in dilute quaternary solutions using binary data. In: Metallurgical and Materials Transactions B, 3 (7). pp. 1913-1918.

Jacob, KT and Alcock, CB (1972) Quasichemical equations for oxygen and sulphur in liquid binary alloys. In: Acta Metallurgica, 20 (2). pp. 221-232.

Jacob, KT and Alcock, CB (1976) Thermodynamics and phase equilibria in the system Cu2O CuO ()Ga2O3. In: Rev. Int. Hautes. Temper. Refract, 13 . pp. 37-42.

Jacob, KT and Alcock, CB (1975) Thermodynamics of CuAlO2 and CuAl2O4 and phase equilibria in the system Cu2O CuO-Al2O3. In: Journal of the American Ceramic Society, 58 (5-6). pp. 192-195.

Jacob, KT and Alcock, CB (1975) The oxygen potential of the systems Fe+FeCr2O4+ Cr2O3 and Fe+FeV2O4+ V2O3 in the temperature range 750 1600o C. In: Metallurgical and Materials Transactions B, 6B . pp. 215-221.

Jacob, KT and Alcock, CB and Fitzner, K (1977) Activities in the spinel solid solution, phase equilibria and thermodynamic properties of ternary phases in the system Cu Fe O. In: Metallurgical and Materials Transactions B, 8 (2). pp. 451-460.

Jacob, KT and Attaluri, Mrinalini (2003) Refinement of thermodynamic data for LaMnO3. In: Journal Of Materials Chemistry, 13 (4). pp. 934-942.

Jacob, KT and Attaluri, Mrinalini and Fitzner, K (2002) Phase diagram for the system Nd-Mn-O and thermodynamic properties of NdMnO3 and NdMn2O5. In: Calphad, 26 (3). pp. 313-325.

Jacob, KT and Behera, CK (2000) Spinel-corundum equilibria and activities in the system MgO-Al2O3-Cr2O3 at 1473 K. In: Metallurgical and Materials Transactions B, 31 (06). pp. 1323-1332.

Jacob, KT and Chan, JC (1974) Electrochemical Determination of the Stability of Mono- and Dicalcium Stannates. In: Journal of the Electrochemical Society, 121 (4). pp. 534-537.

Jacob, KT and Chan, JC and Alcock, CB (1974) Chemical potential of germanium in its solid solutions with Cu, Ag and Au. In: Acta Metallurgica, 22 (5). pp. 545-551.

Jacob, KT and Chandrasekharaiah, MS (1990) Measurement of the Gibbs Energy of Formation of URH3 Using an Solid Electrolyte. In: Zeitschrift für Metallkunde, 81 (7). pp. 509-512.

Jacob, KT and Dasgupta, N and Vineeth, PR (2010) Phase Relations in the System CaO-Fe2O3-Y2O3 at 1273 K and Compatibility Between Y1-xCaxFeO3-0.5x and Stabilized Zirconia. In: Journal of Phase Equilibria and Diffusion, 31 (6). pp. 518-522.

Jacob, KT and Dasgupta, N and Waseda, Y (1999) Thermodynamic properties of the calcium ferrites CaFe2O4 and Ca2Fe2O5. In: Zeitschrift für Metallkunde, 90 (7). pp. 486-490.

Jacob, KT and Dhiman, AK and Gupta, Preeti (2013) System Gd-Rh-O: Thermodynamics and phase relations. In: JOURNAL OF ALLOYS AND COMPOUNDS, 546 . pp. 185-191.

Jacob, KT and Dixit, Apoorva and Rajput, Arneet (2016) Stability field diagrams for Ln-O-Cl systems. In: BULLETIN OF MATERIALS SCIENCE, 39 (3). pp. 603-611.

Jacob, KT and Fitzner, K (1977) Ion exchange equilibria between (Mn,Co)O solid solution and (Mn,Co)Cr2O4 and (Mn,Co)Al2O4 spinel solid solutions at 1100oC. In: Journal of Materials Science, 12 (3). pp. 481-488.

Jacob, KT and Fitzner, K (1977) The estimation of the thermodynamic properties of ternary alloys from binary data using the shortest distance composition path. In: Thermochimica Acta, 18 (2). pp. 197-206.

Jacob, KT and Gupta, Preeti (2013) Gibbs energy of formation of Ca7V4O17. In: Journal of Chemical Thermodynamics, 63 . pp. 7-10.

Jacob, KT and Gupta, Preeti (2014) Gibbs free energy of formation of rhodium sulfides. In: JOURNAL OF CHEMICAL THERMODYNAMICS, 70 . pp. 39-45.

Jacob, KT and Gupta, Preeti (2015) Oxygen potentials and phase equilibria in the system Ca-Co-O and thermodynamic properties of Ca3Co2O6 and Ca3Co4O9.163. In: JOURNAL OF SOLID STATE CHEMISTRY, 221 . pp. 57-65.

Jacob, KT and Gupta, Preeti (2013) Refining sub-solidus phase relations in the systems CaO-RuO2-SiO2 and CaO-RuO2-V2O5. In: MATERIALS RESEARCH BULLETIN, 48 (9). pp. 3082-3087.

Jacob, KT and Gupta, Preeti and Han, Donglin and Uda, Tetsuya (2014) Phase equilibria in the system Sm-Rh-O and thermodynamic and thermal studies on SmRhO3. In: JOURNAL OF MATERIALS SCIENCE, 49 (8). pp. 3135-3145.

Jacob, KT and Gupta, Preeti and Han, Donglin and Uda, Tetsuya (2016) Thermodynamic Properties of YbRhO3 and Phase Relations in the System Yb-Rh-O. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 37 (4, SI). pp. 503-509.

Jacob, KT and Gupta, Preeti and Han, Donglin and Uda, Tetsuya (2013) Thermodynamics of NdRhO3 and phase relations in the system Nd-Rh-O. In: CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 43 . pp. 71-79.

Jacob, KT and Gupta, Preeti and Vinay, M and Waseda, Y (2013) Phase chemistry of the system Nb-Rh-O. In: Journal of Solid State Chemistry, 202 . pp. 234-240.

Jacob, KT and Gupta, Sapna (2009) Calciothermic reduction of TiO2: A diagrammatic assessment of the thermodynamic limit of deoxidation. In: Journal of the Minerals Metals & Materials Society, 61 (5). pp. 56-59.

Jacob, KT and Gupta, Sapna (2009) Phase diagram of the system Ca-Ti-O at 1200 K. In: Bulletin of Materials Science, 32 (6). pp. 611-616.

Jacob, KT and Hajra, JP (1987) Measurement of Gibbs energies of formation of CoF2 and MnF2 using a new composite dispersed solid electrolyte. In: Bulletin of Materials Science, 9 (1). pp. 37-46.

Jacob, KT and Hajra, JP (1986) Oxygen content of liquid cobalt in equilibrium with CoO.(1+x)Al2O3 and -Al2O3. In: Zeitschrift für Metallkunde, 77 . pp. 673-677.

Jacob, KT and Hajra, JP (1985) Thermodynamic properties and phase boundaries of Co O solutions. In: Zeitschrift für Metallkunde, 76 (10). pp. 709-713.

Jacob, KT and Hajra, JP and Mathews, T (1993) Gibbs’ free energies of formation of Cu2Ln2O5 (Ln = Tb, Dy, Er, Yb) compounds. In: High-temperature materials and processes, 12 (4). pp. 251-258.

Jacob, KT and Hajra, JP and Mathews, T (1992) Potentiometric determination of the stability of BaCu2O2. In: Materials Science and Engineering: B, 15 (1). pp. 63-66.

Jacob, KT and Hoque, Manjura S and Waseda, Y (2000) Synergistic use of thermogravimetric and electrochemical techniques for thermodynamic study of TiOx (1.67 <= x <= 2.0) at 1573 K. In: Materials Transactions, JIM, 41 (6). pp. 681-689.

Jacob, KT and Iwase, M (1982) Three phase equilibria for activity determinations: system Co Mn. In: Zeitschrift fur Metallkunde, 73 (5). pp. 316-320.

Jacob, KT and Iwase, M and Waseda, Y (1987) A galvanic sensor for {SO_3 / SO_2} based on the {CaF_2 / CaSO_4} couple. In: Solid State Ionics, 23 (4). pp. 245-252.

Jacob, KT and Iyengar, GNK (1982) Oxidation of alkaline earth sulfides to sulfates: Thermodynamic aspects. In: Metallurgical and Materials Transactions B, 13 (3). pp. 387-390.

Jacob, KT and Iyengar, GNK (1986) Thermodynamic study of Fe2O3 Fe2(SO4)3 equilibrium using an oxyanionic electrolyte (Na2SO4 I). In: Metallurgical and Materials Transactions B, 17 (2). pp. 323-329.

Jacob, KT and Iyengar, GNK (1999) Thermodynamics and phase equilibria involving the spinel solid solution FexMg1-xCr2O4. In: Metallurgical and Materials Transactions B, 30 (5). pp. 865-871.

Jacob, KT and Iyengar, GNK and Srikanth, S (1986) Phase relations and activities in the Co Ni O system at 1373 K. In: Bulletin of Materials Science, 8 (1). pp. 71-79.

Jacob, KT and Jain, S and Saji, VS and Srikanth, PVK (2010) Thermal expansion of doped lanthanum gallates. In: Bulletin of Materials Science, 33 (4). pp. 407-411.

Jacob, KT and Jayadevan, K (2000) Tie-Lines and Mixing Properties of Solid Solutions in the System CaO-SrO-PbO-O at 1100 K. In: Journal of Phase Equilibria and Diffusion, 21 (04). pp. 350-356.

Jacob, KT and Jayadevan, KP (1997) Combined use of oxide and fluoride solid electrolytes for the measurement of Gibbs energy of formation of ternary oxides:System Bi-Ca-O. In: Materials Transactions, JIM, 38 (5). pp. 427-436.

Jacob, KT and Jayadevan, KP (1997) Measurement of Gibbs energy of formation of Ca2PbO4 using a solid-state cell with three electrodes. In: Journal of Materials Chemistry, 7 (12). pp. 2407-2413.

Jacob, KT and Jayadevan, KP (2004) Phase relations in the system Cu-Eu-O and thermodynamic properties of CuEu2O4 and CuEuO2. In: Journal of Phase Equilibria and Diffusion, 25 (2). pp. 125-133.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of $CuLaO_2$ and $CuLa_2O_4$. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Jacob, KT and Jayadevan, KP (1998) Phase relations, chemical potentials and thermodynamic properties of interoxide compounds in the system Ba-Pb-O. In: Materials Science and Engineering B, 52 (2-3). pp. 134-144.

Jacob, KT and Jayadevan, KP (1998) System Bi–Sr–O: Synergistic measurements of thermodynamic properties using oxide and fluoride solid electrolytes. In: Journal of Materials Research, 13 (7). pp. 1905-1918.

Jacob, KT and Jayadevan, KP (2000) System Sr-Pb-O: Phase Equilibria and Thermodynamics Using Solid-State Cells with Buffer Electrodes. In: Chemistry of Materials, 12 (6). 1779 -1786.

Jacob, KT and Jeffes, JHE (1971) Activities of oxygen and lead in Pb-Ag O solutions. In: The Journal of Chemical Thermodynamics, 3 (4). pp. 433-443.

Jacob, KT and Jeffes, JHE (1971) Deoxidation of liquid copper: effect of phosphorus on oxygen activity. In: Transactions of the Institution of Mining and Metallurgy, 80 . C181-189.

Jacob, KT and Jeffes, JHE (1971) Thermodynamic study of oxygen in liquid lead tin alloys. In: Transactions of the Institution of Mining and Metallurgy, 80 . C79-86.

Jacob, KT and Jeffes, JHE (1972) An improved method for calculating activities from distribution equilibria. In: High Temperatures -High Pressures, 4 . pp. 177-182.

Jacob, KT and Jeffes, JHF (1971) Thermodynamics of oxygen in liquid copper, lead and copper lead alloys. In: Transactions of the Institution of Mining and Metallurgy, 80 . C32-41.

Jacob, KT and Kale, GM and Abraham, KP (1992) Electrochemical Determination of Gibbs Energies of Formation of Calcium Chromite and Chromate. In: Journal of the Electrochemical Society, 139 (2). pp. 517-520.

Jacob, KT and Kale, GM and Iyengar, GNK (1989) Chemical potentials of oxygen for fayalite-quartz-lron and fayalite-quartz-magnetite equilibria. In: Metallurgical and Materials Transactions B, 20 (5). pp. 679-685.

Jacob, KT and Kale, GM and Iyengar, GNK (1986) Oxygen potentials, Gibbs' energies and phase relations in the Cu-Cr-o system. In: Journal of Materials Science, 21 (8). pp. 2753-2758.

Jacob, KT and Kale, GM and Iyengar, GNK (1987) Phase equilibria and thermodynamic properties in the system $Ni-Mo-O$. In: Journal of Materials Science, 22 (12). pp. 4274-4280.

Jacob, KT and Kale, GM and Shekhar, Chander (2009) Phase Equilibria in the System Al2O3-CaO-CoO and Gibbs Energy of Formation of Ca3CoAl4O10. In: Journal of Phase Equilibria and Diffusion, 30 (1). pp. 2-11.

Jacob, KT and Kale, GM and Waseda, Y (1992) Gibbs energy of formation of $CuCrO_4$ and phase relations in the system Cu-Cr-O below 735 K. In: Thermochimica Acta, 208 . pp. 341-348.

Jacob, KT and Kale, GM and Waseda, Y (1992) Gibbs energy of formation of CuCrO4 and phase relations in the system Cu-Cr-O below 735 K. In: Thermochimica Acta, 208 (28). pp. 341-348.

Jacob, KT and Kumar, A and Rajitha, G and Waseda, Y (2011) Thermodynamic Data for Mn3O4, Mn2O3 and MnO2. In: High Temperature Materials and Processes, 30 (4-5). pp. 459-472.

Jacob, KT and Kumar, A and Waseda, Y (2008) Gibbs Energy of Formation of MnO: Measurement and Assessment. In: Journal of Phase Equilibria and Diffusion, 29 (3). pp. 222-230.

Jacob, KT and Kumar, BV (1987) Alloy/Oxide Equilibria in Iron--Vanadium--Oxygen and Iron--Niobium--Oxygen Systems. In: Steel Research, 58 (2). pp. 71-76.

Jacob, KT and Kumar, BV (1986) Thermodynamic properties of Cr Mo solid alloys. In: Zeitschrift für Metallkunde, 77 . pp. 207-212.

Jacob, KT and Lwin, Kay Thi and Waseda, Y (2002) Systematic trends in structural and thermodynamic properties of ternary oxides in the systems Ln-Pd-O (Ln = lanthanide element). In: Calphad, 26 (3). pp. 385-401.

Jacob, KT and Mallya, RM and Waseda, Y and Jayadevan, KP (2000) Nanocrystalline MgAl2O4: Measurement of Thermodynamic Properties Using a Solid State Cell. In: Advanced Materials, 12 (6). pp. 440-444.

Jacob, KT and Mansoor, AK (2016) Solubility and activity of oxygen in liquid bismuth. In: CANADIAN METALLURGICAL QUARTERLY, 55 (2). pp. 202-209.

Jacob, KT and Mansoor, Amal K (2016) Gibbs energy of formation of bismuth(III) oxide. In: THERMOCHIMICA ACTA, 630 . pp. 90-96.

Jacob, KT and Mathew, PM (1979) Solubility and activity of oxygen in liquid antimony. In: Zeitschrift fur Metallkunde, 70 (6). pp. 366-371.

Jacob, KT and Mathews, T (1989) Applications of solid electrolytes in galvanic sensors. In: High conductivity solid ionic conductors: recent trends and applications, 1989, Singapore.

Jacob, KT and Mathews, T (1991) Phase relations in the system BiO1.5–SrO–CuO at 1123 K. In: Journal of Materials Chemistry, 1 (4). pp. 545-549.

Jacob, KT and Mathews, T (1990) Solid State Electrochemical Sensors in Process Control. In: Indian Journal of Technology, 28 (6-8). pp. 413-427.

Jacob, KT and Mathews, Tom and Hajra, JP (1993) Gibbs' free energies of formation of $Cu_2Ln_2O_5$ (Ln = Tb, Dy, Er, Yb) compounds. In: High Temperature Materials and Processes, 12 (4). pp. 251-258.

Jacob, KT and Mathews, Tom and Hajra, JP (1993) Phase Relations in the System Cu-Gd-O and Gibbs Energy of Formation of CuGd204. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (7). pp. 1655-1660.

Jacob, KT and Mathews, Tom and Hajra, JP (1992) Potentiometric determination of the stability of $BaCu_2O_2$. In: Materials Science and Engineering B, 15 (1). pp. 63-66.

Jacob, KT and Matthews, T and Hajra, JP (1990) Low oxygen potential boundary for the stability of $YBA_2Cu_3O_{7−\delta}$. In: Materials Science and Engineering B, 7 (1-2). pp. 25-29.

Jacob, KT and Matthews, Tom and Hajra, JP (1990) Low oxygen potential boundary for the stability of YBA2Cu3O7−δ. In: Materials Science and Engineering: B, 7 (1-2). pp. 25-29.

Jacob, KT and Mukhopadhyay, Sukanya and Shukla, AK (1993) Gradient solid-electrolyte for use with dissimilar gas electrodes. In: Solid State Ionics, 62 (1-2). pp. 27-37.

Jacob, KT and Mukhopadhyay, Sukanya and Shukla, AK (1992) Tie lines and activities in the system CoO MgO SiO2 at 1373 K. In: Journal of the American Ceramic Society, 75 (11). pp. 3081-3086.

Jacob, KT and Mukhopadhyay, Sukauya (1994) Application of composition gradient solid electrolytes in sensors and thermodynamic measurements. In: Proc. Second International Symposium on Ionic and Mixed Conducting Ceramics, 1994, Pennington, U.S.A.

Jacob, KT and Muraleedharan, S (2019) Phase diagram of the system Ce-Rh-O. In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 65 . pp. 171-176.

Jacob, KT and Muraleedharan, Srilekshmi (2019) Phase diagram of the system Ce-Rh-O. In: CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 65 . pp. 171-176.

Jacob, KT and Muraleedharan, Srilekshmi (2019) Thermodynamic properties of Pr7O12. In: JOURNAL OF CHEMICAL THERMODYNAMICS, 136 . pp. 54-58.

Jacob, KT and Nelson, Howard G and Rao, Bhogeswara D (1979) Phase relations in the Fe Ni Cr S system and the sulfidation of an austenitic stainless steel. In: Oxidation of Metals, 13 (1). pp. 25-55.

Jacob, KT and Okabe, TH and Waseda, Y and Uda, T (2000) Solute-solute and solute-solvent interactions in transition metal alloys: Pt-Ti system. In: Journal of chemical thermodynamics, 32 (10). 1399 -1408.

Jacob, KT and Okabe, TH and Waseda, Y and Uda, T (1999) An advanced design of the solid-state cell for accurate thermodynamic measurements on ternary oxides: system Sm–Pd–O. In: Materials Science and Engineering: B, 64 (1). pp. 44-53.

Jacob, KT and Pandit, SS (1985) Gibbs Energy of Formation of Cobalt Divanadium Tetroxide. In: Journal of Solid State Chemistry, 60 (2). pp. 237-243.

Jacob, KT and Pandit, SS (1990) A critique of the Gschneidner correlation between stability and normalized unit cell volume of lanthanide intermetallics. In: Journal of Phase Equilibria, 11 (6). pp. 523-525.

Jacob, KT and Panwar, Priyanka and Gupta, Preeti and Singh, Prabhakar (2014) Use of Composition-Graded Bi-Electrolyte Cells for Thermodynamic Studies on Lanthanum Aluminates. In: JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 161 (6). H343-H349.

Jacob, KT and Patil, Rashmi (1998) Activities in the spinel solid solution FeXMg1−XAl2O4. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1241-1248.

Jacob, KT and Petric, A and Kale, GM and Iyengar, GNK (1987) Phase relations between Al2O3---Cr2O3 and FeAl2O4---FeCr2O4 solid solutions at 1823 K. In: Ceramics International, 13 (2). pp. 123-129.

Jacob, KT and Prabhudev, Sagar and Mallya, RM (2010) Resolution of conflicting views on thermodynamics of glass transition: A unified model. In: Bulletin of Materials Science, 33 (5). pp. 603-609.

Jacob, KT and Priya, S and Waseda, Y (1998) Thermodynamic properties and phase equilibria for Pt-Rh alloys. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1545-1550.

Jacob, KT and Priya, S and Waseda, Y (2000) A thermodynamic study of liquid Cu-Cr alloys and metastable liquid immiscibility. In: Zeitschrift für Metallkunde, 91 (7). pp. 594-600.

Jacob, KT and Priya, Shashank and Waseda, Yoshio (1998) Alloy-oxide equilibria in the system Pt-Rh-O. In: Bulletin of Materials Science, 21 (1). pp. 99-103.

Jacob, KT and Prusty, Debadutta (2010) Thermodynamic properties of RhO2. In: Journal of Alloys and Compounds, 507 (1). L17-L20.

Jacob, KT and Prusty, Debadutta and Kale, GM (2012) Phase relations and Gibbs energies of spinel phases and solid solutions in the system Mg-Rh-O. In: Journal of Alloys and Compounds, 513 . pp. 365-372.

Jacob, KT and Raj, Markondeya P and Waseda, Y (1995) The CaO-SrO-CuO-O-2 system: Phase equilibria and thermodynamic properties at 1123 K. In: Journal of Phase Equilibria, 16 (2). pp. 113-120.

Jacob, KT and Raj, Shubhra and Rannesh, L (2007) Vegard's law: a fundamental relation or an approximation? In: International Journal of Materials Research, 2007 (9). pp. 776-779.

Jacob, KT and Raj, Shubhra and Reddy, SNS (2009) Activities in the $FeTiO_{3}-NiTiO_{3}$ Solid Solution from Alloy-Oxide Equilibria at 1273 K. In: Journal of Phase Equilibria and Diffusion, 30 (2). pp. 127-135.

Jacob, KT and Rajitha, G (2009) Discussion of enthalpy, entropy and free energy of formation of GaN. In: Journal Of Crystal Growth, 311 (14). pp. 3806-3810.

Jacob, KT and Rajitha, G (2012) Gibbs Energy of Formation of Ca3Ti8Al12O37 and Phase Relations and Chemical Potentials in the System Al2O3-TiO2-CaO. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 33 (4). pp. 293-302.

Jacob, KT and Rajitha, G (2012) Nonstoichiometry, defects and thermodynamic properties of YFeO3, YFe2O4 and Y3Fe5O12. In: SOLID STATE IONICS, 224 . pp. 32-40.

Jacob, KT and Rajitha, G (2010) Role of entropy in the stability of cobalt titanates. In: Journal of Chemical Thermodynamics, 42 (7). pp. 879-885.

Jacob, KT and Rajitha, G (2011) Thermodynamic properties of strontium titanates Sr2TiO4, Sr3Ti2O7, Sr4Ti3O10, and SrTiO3. In: Journal of Chemical Thermodynamics, The, 43 (1). pp. 51-57.

Jacob, KT and Rajitha, G and Dasgupta, N (2012) Electrical conductivity of Ca-doped YFeO3. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 19 (1). pp. 47-53.

Jacob, KT and Rajitha, G and Kale, GM (2009) Thermodynamic properties of Pb2PtO4 and PbPt2O4 and phase equilibria in the system Pb–Pt–O. In: Journal Of Alloys And Compounds, 481 (1-2). pp. 228-232.

Jacob, KT and Rajitha, G and Kale, GM and Watson, A and Wang, Z (2009) High-temperature heat capacity and heat content of CaCu3Ti4O12 (CCTO). In: Journal of Alloys and Compounds, 488 (1). pp. 35-38.

Jacob, KT and Rajitha, G and Rannesh, L and Fukuyama, H and Waseda, Y (2012) Thermodynamics of Al(1-x)Ga(x)N solid solution: Inclination for phase separation and ordering. In: Acta Materialia, 60 (1). pp. 59-66.

Jacob, KT and Rajitha, G and Saji, VS (2009) Compatibility of RuO2 electrodes with PZT ceramics. In: Bulletin of Materials Science, 32 (3). pp. 313-319.

Jacob, KT and Rajithaa, G and Reddy, SNS (2010) Reactive interdiffusion: deviation from local equilibrium in the Fe-NiTiO3 couple. In: Scripta Materialia, 63 (2). pp. 204-206.

Jacob, KT and Rajput, Arneet (2014) Phase relations in the system Ca-Ta-O and thermodynamics of calcium tantalates in relation to calciothermic reduction of Ta2O5. In: JOURNAL OF ALLOYS AND COMPOUNDS, 620 . pp. 256-262.

Jacob, KT and Ranjani, R (2011) Thermodynamic properties of LaFeO3-delta and LaFe12O19. In: Materials Science and Engineering B, 176 (7). pp. 559-566.

Jacob, KT and Rannesh, L (2007) Thermodynamic activities in the Pb(Zr1−XTiX)O3 solid solution at 1373K. In: Materials Science and Engineering: B, 140 (1-2). pp. 53-58.

Jacob, KT and Rannesh, L. (2007) Thermodynamic activities in the Pb(Zr1-XTiX)O-3 solid solution at 1373 K. In: Materials Science and Engineering B, 140 (1-2). pp. 53-58.

Jacob, KT and Rao, Bhogeswara D (1979) A solid-state probe for SO2/SO3 based on Na2SO4 I electrolyte. In: Journal of the Electrochemical Society, 126 . pp. 1842-1847.

Jacob, KT and Rao, DB and Nelson, HG (1978) Some studies on a solid state sulphur probe for coal gasification system. In: Journal of the Electrochemical Society, 125 (5). pp. 758-762.

Jacob, KT and Richardson, FD and Seshadri, SK (1970) Thermodynamics of oxygen in liquid copper-tin alloys. In: Transactions of the Institution of Mining and Metallurgy, 79 . pp. 274-280.

Jacob, KT and Saji, VS and Reddy, SNS (2007) Thermodynamic evidence for order-disorder transition in $NiTiO_3$. In: Journal of Chemical Thermodynamics, 39 (2). pp. 230-235.

Jacob, KT and Saji, VS and Waseda, Y (2006) Activity of TiO2 in the System ZrO2-TiO2 and Gibbs Energy of Formation of ZrTiO4. In: High Temperature Materials and Processes, 25 (4). pp. 203-208.

Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of Pb2Ru2O6.5. In: Journal of Materials Research, 22 (5).

Jacob, KT and Seetharaman, S (1995) Discussion of thermodynamic stability of metallurgical coke relative to graphite. In: Metallurgical and Materials Transactions B, 26B (3). pp. 655-656.

Jacob, KT and Seetharaman, S (1994) Thermodynamic stability of metallurgical coke relative to graphite. In: Metallurgical and Materials Transactions A, 25 (1). 149-154 .

Jacob, KT and Sharma, Juhi and Gupta, Preeti (2012) System Ho-Rh-O: Phase Equilibria, Chemical Potentials and Gibbs Energy of Formation of HoRhO3. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 33 (6). pp. 429-436.

Jacob, KT and Sheela, Ramasesha K (1989) Design of temperature-compensated reference electrodes for non-isothermal galvanic sensors. In: Solid State Ionics, 34 (3). pp. 161-166.

Jacob, KT and Shekhar, C and Waseda, Y (2009) An update on the thermodynamics of Ta2O5. In: Journal of Chemical Thermodynamics, 41 (6). pp. 748-753.

Jacob, KT and Shekhar, Chander and Kale, GM (2009) Phase Equilibria in the System $Al_{2}O_{3}-CaO-CoO$ and Gibbs Energy of Formation of $Ca_{3}CoAl_{4}O_{10}$. In: Journal of Phase Equilibria and Diffusion, 30 (1). pp. 2-11.

Jacob, KT and Shekhar, Chander and Vinay, M and Waseda, Yoshio (2010) Thermodynamic Properties of Niobium Oxides. In: Journal of Chemical & Engineering Data, 55 (11). pp. 4854-4863.

Jacob, KT and Shekhar, Chander and Waseda, Y (2009) Phase relations in the system (chromium + rhodium + oxygen) and thermodynamic properties of CrRhO3. In: Journal of Chemical Thermodynamics, 41 (01). pp. 56-61.

Jacob, KT and Shekhar, Chander and Waseda, Y (2009) Phase relations in the system Ta-Rh-O and thermodynamic properties of TaRhO4. In: Materials Chemistry and Physics, 116 (1). pp. 289-293.

Jacob, KT and Shim, WW (1981) Gibbs energy of formation of lead zirconate. In: Journal of the American Ceramic Society, 64 (10). pp. 573-578.

Jacob, KT and Shreyas, V (2018) Thermodynamic properties of SrAl12O19 and SrAl4O7. In: JOURNAL OF MATERIALS SCIENCE, 53 (3). pp. 1723-1730.

Jacob, KT and Shreyas, Varun (2017) Conversion of Rare-Earth Oxides to Halides: How to Prevent Formation of Oxyhalides? In: Journal of Sustainable Metallurgy, 3 (4). pp. 793-796. ISSN 2199-3823

Jacob, KT and Shukla, AK (1987) Kinetic decomposition of Ni2SiO4 in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.

Jacob, KT and Shukla, AK (1987) Kinetic decomposition of {Ni_2SiO_4} in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.

Jacob, KT and Shukla, AK and Ramachandran, A and Kale, GM (1986) Gibbs energy of formation of nickel orthosilicate (Ni2SiO4). In: High Temperature Materials and Processes, 7 (2-3). pp. 141-148.

Jacob, KT and Sivakumar, Shivesh (2019) Thermodynamic properties of MgGa2O4 and phase relations in the system Mg-Ga-O. In: JOURNAL OF ALLOYS AND COMPOUNDS, 775 . pp. 1357-1364.

Jacob, KT and Sreedharan, OM and Azad, AM (1991) Standard Gibbs' energies of formation of BaCuO2, Y2Cu2O5 and Y2BaCuO5. In: Journal of Materials Science , 26 (12). pp. 3374-3379.

Jacob, KT and Srikanth, S (1987) Gibbs energy of formation of $Au_2Na$. In: Scripta Metallurgica, 21 (12). pp. 1649-1654.

Jacob, KT and Srikanth, S (1987) Gibbs energy of formation of Au2Na. In: Scripta metallurgica, 21 (12). pp. 1649-1654.

Jacob, KT and Srikanth, S (1990) Physical chemistry of the reduction of calcium oxide with aluminium in vacuum. In: High Temperature Materials and Processes, 9 (2-4). pp. 77-92.

Jacob, KT and Srikanth, S and Waseda, Y (1988) Activities, concentration fluctuations and complexing in liquid Ca-Al alloys. In: Transactions of the Japan institute of metals, 29 (1). pp. 50-59.

Jacob, KT and Srikanth, S and Waseda, Y (1988) Vapour composition and activities in Mg-Zn liquid alloy at 923 K. In: Thermochimica Acta, 130 . pp. 193-203.

Jacob, KT and Srikanth , S (1988) Use of metastable equilibria for determination of Gibbs energy of solids. In: Journal of Materials Research, 3 (4). 687 -693.

Jacob, KT and Sriram, MV (1994) Phase relations and gibbs energies in the system Mn-Rh-O. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1347-1357.

Jacob, KT and Subramanian, R (2008) Phase Diagram for the System RuO2-TiO2 in Air. In: Journal of Phase Equilibria and Diffusion, 29 (2). pp. 136-140.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system PbO-RuO2-TiO2. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Jacob, KT and Swaminathan, K and Sreedharan, OM (1991) Potentiometric determination of activities in the two-phase fields of the system Na2O---(α)Al2O3. In: Electrochimica Acta, 36 (5-6). pp. 791-798.

Jacob, KT and Swaminathan, K and Sreedharan, OM (1989) Stability constraints in the design of galvanic cells using composite electrolytes and auxiliary electrodes. In: Solid State Ionics, 34 (3). pp. 167-173.

Jacob, KT and Toguri, JM (1979) Authors reply to the discussion of Thermodynamics of oxide sulfate melts: The system PbO PbSO4. In: Metallurgical and Materials Transactions B, 10 (2). pp. 297-298.

Jacob, KT and Toguri, JM (1978) Thermodynamics of oxide sulfate melts: The system PbO PbSO4. In: Metallurgical and Materials Transactions B, 9 (3). pp. 301-306.

Jacob, KT and Uda, T and Okabe, TH and Waseda, Y (2000) The standard enthalpy and entropy of formation of Rh2O3 - A third-law optimization. In: High Temperature Materials and Processes, 19 (1). pp. 11-16.

Jacob, KT and Uda, T and Waseda, Y and Okabe, TH (1999) Phase relations in the system Sr–Ir–O and thermodynamic measurements on SrIrO3, Sr2IrO4 and Sr4IrO6 using solid-state cells with buffer electrodes. In: Journal of Alloys and Compounds, 288 (1-2). pp. 188-196.

Jacob, KT and Uda, T and Waseda, Y and Okabe, TH (1999) System Cu-Rh-O: Phase diagram and thermodynamic properties of ternary oxides CuRhO2 and CuRh204. In: Bulletin of Materials Science, 22 (4). pp. 741-749.

Jacob, KT and Valderrama, JN (1977) Gibbs free energy of formation of magnesium stannate. In: Journal of Solid State Chemistry, 22 (3). 291-295 .

Jacob, KT and Varamban, S Vana (1998) Phase equilibria and thermodynamic properties of ternary oxides in the system Co-Mo-O. In: Journal of Alloys and Compounds, 280 (1-2). pp. 138-146.

Jacob, KT and Varghese, Viji (1995) Solid-state miscibility gap and thermodynamics of the system BaO–SrO. In: Journal of Materials Chemistry, 5 (7). pp. 1059-1062.

Jacob, KT and Verman, R and Mallya, RM (2002) Nitride synthesis using ammonia and hydrazine - a thermodynamic panorama. In: Journal of Materials Science (full set), 37 (20). pp. 4465-4472.

Jacob, KT and Waseda, Y (1990) Gibbs energies of formation of rare earth $MPt_5$ compounds. In: Thermochimica Acta, 165 (2). pp. 223-233.

Jacob, KT and Waseda, Y (1990) Gibbs energies of formation of rare earth MPt5 compounds. In: Thermochimica Acta, 165 (2). 223-233 .

Jacob, KT and Waseda, Y (1994) Phase relations in the system SrO-Y2O3-CuO-O2 and CaO-Y2O3-CuO-O2 at 1173 K. In: Journal of Phase Equilibria, 15 (4). pp. 401-405.

Jacob, KT and Waseda, Y (1995) Potentiometric determination of the gibbs energies of formation of SrZrO3 and BaZrO3. In: Metallurgical and Materials Transactions B, 26 (4). pp. 775-781.

Jacob, KT and Waseda, Y (2000) Solid State Cells with Buffer Electrodes for Measurement of Chemical Potentials and Gibbs Energies of Formation: System Ca-Rh-O. In: Journal of Solid State Chemistry, 150 (1). pp. 213-220.

Jacob, KT and Waseda, Y (1990) Thermodynamic Properties of Platinum-rich Intermetallics in the Pt-Gd System. In: Materials Transactions, JIM, 31 (2). pp. 135-140.

Jacob, KT and Waseda, Y (1990) Thermodynamic properties of $Pt_5La, Pt_5Ce, Pt_5Pr, Pt_5Tb$ and $Pt_5Tm$ intermetallics. In: Bulletin of Materials Science, 13 (4). pp. 235-244.

Jacob, KT and Waseda, Y (1990) Thermodynamic properties of Pt5La, Pt5Ce, Pt5Pr, Pt5Tb and Pt5Tm intermetallics. In: Bulletin of Materials Science, 13 (4). pp. 235-244.

Jacob, KT and Waseda, Y (1990) The standard molar Gibbs energy of formation of $YbPt_3$ and $LuPt_3$ intermetallics. In: Journal of Chemical Thermodynamics, 22 (10). pp. 929-936.

Jacob, KT and Waseda, Y (1990) The standard molar Gibbs energy of formation of YbPt3 and LuPt3 intermetallics. In: The Journal of Chemical Thermodynamics, 22 (10). pp. 929-936.

Jacob, KT and Waseda, Y (1988) The vapour pressures of barium and strontium. In: Journal of the Less Common Metals, 139 (2). pp. 249-259.

Jacob, KT and Waseda, Y and Iwase, M (1986) Sensor for H2S or S2 based on alumina. In: Journal of the American Ceramic Society, 1 (3). pp. 264-270.

Jacob, KT and Waseda, Y and Iwase, M (1982) Sulphur potential measurements with a two phase sulphide oxide electrolyte. In: Journal of Applied Electrochemistry, 13 (1). pp. 55-67.

Jacob, KT and Waseda, Y and Iwase, M (1987) A galvanic sensor for SO3/SO2 based on CaF2/CaSO4 couple. In: Solid State Ionics, 23 (4). pp. 245-252.

Jacob, KT and Waseda, Y and Uda, T and Okabe, TH (2000) Solid-state cells with buffer electrodes for accurate thermodynamic measurements: system Nd-Ir-O. In: Electrochimica Acta, 45 (12). pp. 1963-1971.

Jacob, KT and Waseda, Y and Uda, T and Okabe, TH (1999) System Nd-Pd-O: Phase diagram and thermodynamic properties of oxides using a solid-state cell with advanced features. In: Journal of Phase Equilibria, 20 (6). pp. 553-564.

Jacob, Kallarackel T and Agarwal, Karuna and Gupta, Preeti (2012) Thermodynamics of TmRhO3, Phase Equilibria, and Chemical Potentials in the System Tm-Rh-O. In: JOURNAL OF CHEMICAL AND ENGINEERING DATA, 57 (12). pp. 3677-3684.

Jacob, Kallarackel T and Gupta, Preeti (2013) Electrochemical determination of thermodynamic properties of DyRhO3 and phase relations in the system Dy-Rh-O. In: JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 17 (3). pp. 607-615.

Jacob, Kallarackel T and Jain, Saurabh (2005) Fuel Cell Efficiency Redefined; Carnot Limit Reassessed. In: Q1 - Ninth International Symposium on Solid Oxide Fuel Cells (SOFC IX), 2005-07, USA.

Jacob, Kallarackel T and Muraleedharan, Srilekshmi (2019) Thermodynamic properties of PrRhO3 and phase diagrams of the system Pr-Rh-O. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 102 (12). pp. 7617-7627.

Jacob, Kallarackel T and Rajput, Arneet (2016) Gibbs Energy of Formation of Eu3O4 and EuO. In: JOURNAL OF CHEMICAL AND ENGINEERING DATA, 61 (5). pp. 1710-1717.

Jacob, Kallarackel T and Saji, Viswanathan S and Waseda, Yoshio (2006) Internal displacement reactions in multicomponent oxides: Part I. Line compounds with narrow homogeneity range. In: International Journal of Applied Ceramic Technology, 3 (4). pp. 312-321.

Jacob, Kallarackel Thomas and Gupta, Sapna and Singh, Prabhakar (2013) Electrochemical Determination of Gibbs Energy of Formation of LaCrO3 Using a Composition-Graded Bielectrolyte. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 96 (10). pp. 3272-3278.

Jacob, L and Kumar, A (2001) Establishing the region of stability for an input queueing cell switch. In: IEEE Proceedings- Communications, 148 (6). pp. 343-347.

Jacob, TK and Lwin, KT and Waseda, Y (2003) Calcium ruthenates: Determination of Gibbs energies of formation using electrochemical cells. In: Journal of the Electrochemical Society, 150 (4). E227-E232 .

Jacob, Thomas K (1985) Knudsen effusion measurements on Cr Mn alloys. In: Zeitschrift für Metallkunde, 76 (6). pp. 415-419.

Jacob, Thomas K and Chandrasekharaiah, Mallasetty S (1990) Measurement of the Gibbs energy of formation of URh3 using an oxide solid electrolyte. In: Zeitschrift für Metallkunde, 81 (7). pp. 509-512.

Jacob, Thomas K and Dasgupta, Niladri and Nafe, Helfried and Aldinger, Fritz (2000) Measurement of Gibbs energy of formation of LaGaO3 using a composition-graded solid electrolyte. In: Journal of Materials Research, 15 (12). pp. 2836-2843.

Jacob, Thomas K and Dasgupta, Niladri and Waseda, Yoshio (1998) Composition-graded solid electrolyte for determination of the Gibbs energy of formation of lanthanum zirconate. In: Journal of the American Ceramic Society, 81 (7). pp. 1926-1930.

Jacob, Thomas K and Jayadevan, Kampurath P and Mallya, Ram M and Waseda, Yoshio (2000) Nanocrystalline $Mg{Al}_2{O}_4$:Measurement of Thermodynamic Properties Using a Solid State Cell. In: Advance Materials, 12 (6). pp. 440-444.

Jacob, Thomas K and Jayadevan, Kampurath P and Waseda, Yoshio (1998) Electrochemical determination of the Gibbs energy of formation of MgAl2O4. In: Journal of the American Ceramic Society, 81 (1). pp. 209-212.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yahio (2002) High-temperature phase chemistry of the system Gd-Pd-O. In: Science and Technology of Advanced Materials, 3 (2). pp. 75-84.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yashio (2002) System La-Pd-O: phase diagram and thermodynamic properties of ternary oxides. In: Solid State Sciences, 4 (2). pp. 205-215.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2002) High temperature phase chemistry of system Eu-Pd-O. In: Materials Science and Technology, 18 (10). pp. 1063-1071.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2003) Phase equilibria in the systems Ln–Pd–O and thermodynamic properties of $Ln_2Pd_2O_5$ (Ln=Dy, Ho). In: Materials Chemistry and Physics, 77 (2). pp. 331-340.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2003) Strontium ruthenates: determination of Gibbs energies of formation using electrochemical cells. In: Materials Science and Engineering B, 103 (2). pp. 152-161.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2002) The thermodynamics and phase behaviour of Tb2Pd2O5 and Er2Pd2O5. In: Journal of Chemical Thermodynamics, The, 34 (10). pp. 1509-1529.

Jacob, Thomas K and Mathews, Tom (1992) Phase Relations and Thermodynamic Properties of Condensed Phases in the System Sr–Cu–O. In: Journal of the American Ceramic Society, 75 (12). pp. 3225-3232.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of the thermodynamic properties of ruthenium dioxide and osmium dioxide. In: Journal of the American Chemical Society, 83 (7). pp. 1745-1752.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of thermodynamic properties of $ReO_2$. In: Thermochimica Acta, 348 (1-2). pp. 61-68.

Jacob, Thomas K and Mishra, Saurabh and Waseda, Yoshio (2000) Refinement of thermodynamic properties of ReO2. In: Thermochimica Acta, 348 (1-2). pp. 61-68.

Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of $CaCu_3Ti_4O_{12}$ and phase relations in the system $CaO-CuO/Cu_2O-TiO_2$. In: Acta Materialia, 56 (17). pp. 4798-4803.

Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of CaCu3Ti4O12 and phase relations in the system CaO-CUO/CU2O-TiO2. In: Acta Materialia, 56 (17). pp. 4798-4803.

Jacob, Thomas K and Waseda, Y (1994) High-temperature stability of Ca2ZrSi4O12. In: Journal of the american ceramic society, 77 (11). 3033 -3035 .

Jacob , KT and Chandran , A and Mallya , RM (2000) An assessment of the reduction potential of hydrogen plasma. In: Zeitschrift für Metallkunde, 91 (5). 401-405 .

Jacoba, KT and Jeffes, JHE (1973) Interaction between oxygen and silver dissolved in liquid copper. In: The Journal of Chemical Thermodynamics, 5 (3). 365-369 .

Jadhav, YA and Rahane, GK and Goswami, T and Jagadish, K and Chordiya, K and Roy, A and Debnath, T and Jathar, SB and Devan, R and Upadhyay Kahaly, M and Rondiya, SR and Ghosh, HN and Dzade, NY (2023) Novel Au/Cu2NiSnS4 Nano-Heterostructure: Synthesis, Structure, Heterojunction Band Offset and Alignment, and Interfacial Charge Transfer Dynamics. In: ACS Applied Materials and Interfaces, 16 . 21746 - 21756.

Jagadeeshanayaka, N and Awasthi, Shikha and Jambagi, Sudhakar C and Srivastava, Chandan (2022) Bioactive surface modifications through thermally sprayed hydroxyapatite composite coatings: a review of selective reinforcements. In: Biomaterials Science, 10 . pp. 2484-2523. ISSN 2047-4830

Jagadeshavaran, PL and Nallabothula, H and Menon, AV and Bose, S (2020) Nanoinfiltration for Enhancing Microwave Attenuation in Polystyrene-Nanoparticle Composites. In: ACS Applied Nano Materials, 3 (2). pp. 1872-1880.

Jagadeshvaran, PL and Bose, S (2022) Evolution of Surface Engineering in the Development of Textile-Based EMI Shields─A Review. In: ACS Applied Electronic Materials .

Jagadeshvaran, PL and Bose, S (2023) Nano silver-deposited cotton textile core with carbon nanostructure-filled shell for suppression of electromagnetic radiation via absorption-reflection-absorption. In: Materials Chemistry and Physics, 293 .

Jagadeshvaran, PL and Menon, AV and Bose, S (2021) Evolution of personal protective equipment from its inception to COVID-19. In: Current Science, 120 (7). pp. 1169-1183.

Jagadeshvaran, PL and Panwar, K and Ramakrishnan, I and Bose, S (2021) Solvent-Free Conductive Coatings Containing Chemically Coupled Particles for Functional Textiles. In: ACS Applied Electronic Materials .

Jagadeshvaran, PL and Parasuram, S and Bose, S (2023) Polymer-based nanocomposites for smart and functional textiles. [Book Chapter]

Jagdish, AK and Garg, K and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2018) Moldable biomimetic nanoscale optoelectronic platforms for simultaneous enhancement in optical absorption and charge transport. In: Nanoscale, 10 (8). pp. 3730-3737.

Jagdish, AK and Kumar, MP and Sandeep, BS and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2018) Hierarchical structures and multiscale optical coupling for improved photodetectors. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Jagdish, AK and Luke, S and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2016) Design of nanostructures for light management in organic photovoltaic devices. In: 44th IEEE Photovoltaic Specialist Conference, PVSC 2017, 5-10 June 2016, Portland, pp. 2285-2290.

Jagdish, AK and Luke, Sibimol and Garg, Kavita and Ramamurthy, Praveen C and Mahapatra, D Roy and Hegde, Gopalkrishna (2019) Light trapping in photovoltaic devices with weak dielectric absorbers: Nanostructured dielectric and metal interfaces. In: OPTICAL MATERIALS, 89 . pp. 288-294.

Jagdish, AK and Luke, Sibimol and Ramamurthy, Praveen C and Mahapatra, Roy D and Hegde, Gopalkrishna (2016) Nanostructure-based enhancement of performance in thin-film photovoltaic devices. In: Conference on Physics, Simulation, and Photonic Engineering of Photovoltaic Devices V, FEB 15-17, 2016, San Francisco, CA.

Jagdish, AK and Ramamurthy, Praveen C and Mahapatra, Roy D and Hegde, Gopalkrishna (2014) Modelling of optical transport behavior of organic photovoltaic devices with nano-pillar transparent conducting electrodes. In: JOURNAL OF APPLIED PHYSICS, 116 (7).

Jagdish, Anakkavoor Krishnaswamy and Kumar, Gangineni Pavan and Ramamurthy, Praveen C and Mahapatra, Debiprosad Roy and Hegde, Gopalkrishna (2016) Understanding coupled electro-thermal processes in the catastrophic failure of organic electronic devices. In: ORGANIC ELECTRONICS, 39 . pp. 354-360.

Jagtap, P and Kumar, P (2023) Effect of electric field on mechanical behavior of vertically-aligned carbon nanotube structures. In: Proceedings of the Indian National Science Academy .

Jagtap, P and Kumar, P (2020) Whisker Growth in Sn Coatings: A Review of Current Status and Future Prospects. In: Journal of Electronic Materials . (In Press)

Jagtap, Piyush and Chakraborty, Aritra and Eisenlohr, Philip and Kumar, Praveen (2017) Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction. In: ACTA MATERIALIA, 134 . pp. 346-359.

Jagtap, Piyush and Gowda, Prarthana and Das, Bikramjit and Kumar, Praveen (2013) Effect of electro-mechanical coupling on actuation behavior of a carbon nanotube cellular structure. In: CARBON, 60 . pp. 169-174.

Jagtap, Piyush and Kumar, Amit and Kumar, Praveen (2016) Effect of electric field on creep and stress-relaxation behavior of carbon nanotube forests. In: RSC ADVANCES, 6 (72). pp. 67685-67692.

Jagtap, Piyush and Kumar, Praveen (2014) Evaluating shock absorption behavior of small-sized systems under programmable electric field. In: REVIEW OF SCIENTIFIC INSTRUMENTS, 85 (11).

Jagtap, Piyush and Kumar, Praveen (2016) Macro and Micro-Texture Study for Understanding Whisker Growth in Sn Coatings. In: 18th IEEE Electronics Packaging Technology Conference (EPTC), NOV 30-DEC 03, 2016, Singapore, SINGAPORE, pp. 165-170.

Jagtap, Piyush and Kumar, Praveen (2015) Manipulating Crystallographic Texture of Sn Coatings by Optimization of Electrodeposition Process Conditions to Suppress Growth of Whiskers. In: JOURNAL OF ELECTRONIC MATERIALS, 44 (4). pp. 1206-1219.

Jagtap, Piyush and Narayan, P Ramesh and Kumar, Praveen (2018) Effect of Substrate Composition on Whisker Growth in Sn Coatings. In: JOURNAL OF ELECTRONIC MATERIALS, 47 (7). pp. 4177-4189.

Jagtap, Piyush and Reddy, Siva Kumar and Sharma, Deepak and Kumar, Praveen (2015) Tailoring energy absorption capacity of CNT forests through application of electric field. In: CARBON, 95 . pp. 126-136.

Jagtap, Piyush and Sethuraman, Vijay A and Kumar, Praveen (2018) Critical Evaluation of Relative Importance of Stress and Stress Gradient in Whisker Growth in Sn Coatings. In: JOURNAL OF ELECTRONIC MATERIALS, 47 (9). pp. 5229-5242.

Jaidev, LR and Chatterjee, Kaushik (2019) Surface functionalization of 3D printed polymer scaffolds to augment stem cell response. In: MATERIALS & DESIGN, 161 . pp. 44-54.

Jaidev, LR and Kumar, Sachin and Chatterjee, Kaushik (2017) Multi-biofunctional polymer graphene composite for bone tissue regeneration that elutes copper ions to impart angiogenic, osteogenic and bactericidal properties. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 159 . pp. 293-302.

Jain, NK and Nair, Krishnadas CG and Abraham, KP and Prasad, YVRK (1984) Hot torsional study of electroslag refined RR 58. In: Transactions of the Indian Institute of Metals, 37 (5). pp. 493-497.

Jain, A and Behera, M and Mahapatra, C and Sundaresan, NR and Chatterjee, K (2021) Nanostructured polymer scaffold decorated with cerium oxide nanoparticles toward engineering an antioxidant and anti-hypertrophic cardiac patch. In: Materials Science and Engineering C, 118 .

Jain, A and Behera, M and Ravi, V and Mishra, S and Sundaresan, NR and Chatterjee, K (2021) Recapitulating pathophysiology of skeletal muscle diseases in vitro using primary mouse myoblasts on a nanofibrous platform. In: Nanomedicine: Nanotechnology, Biology, and Medicine, 32 .

Jain, A and Hasan, J and Ravi, V and Muhamed, J and Chatterjee, K and Sundaresan, NR (2018) Engineered biomaterial surfaces for neonatal murine cardiomyocyte culture toward understanding cardiac hypertrophy. In: Trends in Biomaterials and Artificial Organs, 32 (1). pp. 36-39.

Jain, A and Prajapati, SK and Kumari, A and Mody, N and Bajpai, M (2020) Engineered nanosponges as versatile biodegradable carriers: An insight. In: Journal of Drug Delivery Science and Technology, 57 .

Jain, A and Prajapati, SK and Tripathi, M and Raichur, AM and Kanwar, JR (2021) Exploring the room for repurposed hydroxychloroquine to impede COVID-19: toxicities and multipronged combination approaches with pharmaceutical insights. In: Expert Review of Clinical Pharmacology, 14 (6). pp. 715-734.

Jain, Aditi and Hasan, Jafar and Desingu, Perumal Arumugam and Sundaresan, Nagalingam R and Chatterjee, Kaushik (2018) Engineering an in vitro organotypic model for studying cardiac hypertrophy. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 165 . pp. 355-362.

Jain, Aditi and Ravi, Venkatraman and Muhamed, Jaseer and Chatterjee, Kaushik and Sundaresan, Nagalingam R. (2017) A simplified protocol for culture of murine neonatal cardiomyocytes on nanoscale keratin coated surfaces. In: International Journal of Cardiology, 232 . pp. 160-170. ISSN 01675273

Jain, Ashish and Anthonysamy, S and Ananthasivan, K and Gupta, GS (2010) Studies on the ignition behaviour of boron powder. In: Thermochimica Acta, 500 (1-2). pp. 63-68.

Jain, Ashish and Anthonysamy, S and Gupta, GS and Ganesan, V (2013) Processing of enriched elemental boron (B-10 similar to 65 at. %). In: Materials Chemistry and Physics, 140 (1). pp. 335-342.

Jain, Ashish and Ghosh, C and Ravindran, TR and Anthonysamy, S and Divakar, R and Mohandas, E and Gupta, GS (2013) Structural characterization of electrodeposited boron. In: BULLETIN OF MATERIALS SCIENCE, 36 (7). pp. 1323-1329.

Jain, Ashish and Joseph, Kitheri and Anthonysamy, S and Gupta, GS (2011) Kinetics of oxidation of boron powder. In: Thermochimica Acta, 514 (1-2). pp. 67-73.

Jain, Ashish and Pankajavalli, R and Anthonysamy, S and Ananthasivan, K and Babu, R and Ganesan, V and Gupta, GS (2010) Determination of the thermodynamic stability of TiB2. In: Journal of Alloys and Compounds, 491 (1-2). pp. 747-752.

Jain, Mohit and Prakash, Surya R and Tomar, Gaurav and Ravikrishna, RV (2015) Secondary breakup of a drop at moderate Weber numbers. In: PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, MAY 8 2015.

Jain, N and Roy, A and De, A (2019) Ba-addition induced enhanced surface reducibility of SrTiO3: implications on catalytic aspects. In: Nanoscale Advances, 1 (12). pp. 4938-4946.

Jain, N and Shashi Bhushan, BL and Natarajan, M and Mehta, R and Saini, DK and Chatterjee, K (2024) Advanced 3D In Vitro Lung Fibrosis Models: Contemporary Status, Clinical Uptake, and Prospective Outlooks. In: ACS Biomaterials Science and Engineering, 10 (3). pp. 1235-1261.

Jain, N and Waidi, YO and Barua, R and Vannaladsaysy, V and Prasad, A and Datta, S (2024) Plastic recycling for energy production. [Book Chapter]

Jain, Narendra K and Nair, Chandrathil GK and Abraham, KP and Prasad, Yellapregada VRK (1983) Hot workability and kinetics of hot deformation in electroslag-refined heat-resistant aluminum alloy. In: Zeitschrift fuer Metallkunde, 74 (10). pp. 633-638.

Jain, Shubham and Meka, Sai Rama Krishna and Chatterjee, Kaushik (2016) Curcumin eluting nanofibers augment osteogenesis toward phytochemical based bone tissue engineering. In: BIOMEDICAL MATERIALS, 11 (5).

Jain, Shubham and Meka, Sai Rama Krishna and Chatterjee, Kaushik (2016) Engineering a Piperine Eluting Nanofibrous Patch for Cancer Treatment. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 2 (8). pp. 1376-1385.

Jain, Vikram Kumar S and Yazar, K U and Muthukumaran, S (2019) Development and characterization of Al5083-CNTs/SiC composites via friction stir processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 798 . pp. 82-92.

Jaiswal, SK and Ranjan, R and Kumar, J (2020) Structural, Mössbauer studies and oxygen permeation characteristics of Sr1-xBaxFe1-yLiyO3-ξ (x = 0, 0.5; y = 0 � 0.10) system. In: Journal of Alloys and Compounds, 844 .

Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.

Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.

Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.

Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.

Jalali, SIA and Sen, M and Banerjee, D (2022) Strain mapping in fine scale multivariant α structures in titanium alloys. In: Materials Characterization, 193 .

Jalali, Syed Idrees Afzal and Kumar, Praveen and Jayaram, Vikram (2019) Creep of Metallic Materials in Bending. In: JOM, 71 (10). pp. 3565-3583.

Jana, A and Ray, D (2020) Synthesis and characterization of sol-gel derived monophasic mullite powder Síntese e caracterização de pó de mulita monofásico derivado de sol-gel. In: Ceramica, 66 (379). pp. 307-313.

Jana, Dulal Chandra and Sundararajan, G and Chattopadhyay, K (2017) Effect of monomers content in enhancing solid-state densification of silicon carbide ceramics by aqueous gelcasting and pressureless sintering. In: CERAMICS INTERNATIONAL, 43 (6). pp. 4852-4857.

Jana, Dulal Chandra and Sundararajan, G and Chattopadhyay, K (2018) Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (11). pp. 5599-5606.

Jana, Dulal Chandra and Sundararajan, Govindan and Chattopadhyay, Kamanio (2016) Effect of Porosity on Structure, Young's Modulus, and Thermal Conductivity of SiC Foams by Direct Foaming and Gelcasting. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 100 (1). pp. 312-322.

Jana, S and Bhowmick, R and Kawamura, Y and Chattopadhyay, K and Ramamurty, U (2004) Deformation morphology underneath the Vickers indent in a Zr-based bulk metallic glass. In: Intermetallics, 12 (10-11). pp. 1097-1102.

Jana, S and Ramamurty, U and Chattopadhyay, K and Kawamura, Y (2004) Subsurface deformation during Vickers indentation of bulk metallic glasses. In: Materials Science and Engineering A, 375-37 . pp. 1191-1195.

Jangde, A and Kumar, S and Blawert, C (2024) Correlative study of Mott�Schottky analysis and corrosion behaviour of plasma electrolytic oxidation treated magnesium alloy: Effect of Cl� concentrations. In: Corrosion Science, 240 .

Jangde, A and Kumar, S and Blawert, C (2020) Evolution of PEO coatings on AM50 magnesium alloy using phosphate-based electrolyte with and without glycerol and its electrochemical characterization. In: Journal of Magnesium and Alloys, 8 (3). pp. 692-715.

Jangde, A and Kumar, S and Blawert, C (2022) Role of glycerine on formation & corrosion characteristic of PEO layer formed over Mg alloy in a high-concentrated mixed silicate-phosphate-based electrolyte. In: Surface and Coatings Technology, 450 .

Jangde, Ashutosh and Kumar, S and Blawert, C (2019) Influence of glycerol on plasma electrolytic oxidation coatings evolution and on corrosion behaviour of coated AM50 magnesium alloy. In: CORROSION SCIENCE, 157 . pp. 220-246.

Jarugula, R and Channagiri, S and Raman, SGS and Sundararajan, G (2021) Strengthening Mechanisms in Nano Oxide Dispersion-Strengthened Fe-18Cr Ferritic Steel at Different Temperatures. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (5). pp. 1901-1912.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Dry sliding wear in binary Al-Si alloys at low bearing pressures. In: Journal of Materials Science Letters, 11 (7). pp. 421-423.

Jasim, Mohammed K and Dwarakadasa, ES (1992) Effect of mechanical properties on the adhesive wear of metals. In: Journal of Materials Science Letters, 11 (19). pp. 1309-1311.

Jasim, Mohammed K and Dwarakadasa, ES (1993) Effect of sliding speed on adhesive wear of binary Al-Si alloys. In: Journal of Materials Science Letters, 12 (9). pp. 650-653.

Jaya, BN and Jayaram, V (2017) The edge-notched clamped beam as a fracture toughness test geometry: Crack stability and analytical expressions for the stress intensity factor. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 83-84.

Jaya, Balila Nagamani and Bhowmick, Sanjit and Asif, Syed SA and Jayaram, Vikram (2015) In-situ study of microscale fracture of diffusion aluminide bond coats: Effect of platinum. In: JOURNAL OF MATERIALS RESEARCH, 30 (21). pp. 3343-3353.

Jaya, Nagamani and Jayaram, Vikram (2016) Fracture Testing at Small-Length Scales: From Plasticity in Si to Brittleness in Pt. In: JOM, 68 (1). pp. 94-108.

Jaya, Nagamani B and Alam, Md Zafir (2013) Small-scale mechanical testing of materials. In: CURRENT SCIENCE, 105 (8). pp. 1073-1099.

Jaya, Nagamani B and Bhowmick, Sanjit and Asif, Syed SA and Warren, Oden L and Jayaram, Vikram (2015) Optimization of clamped beam geometry for fracture toughness testing of micron-scale samples. In: PHILOSOPHICAL MAGAZINE, 95 (16-18). pp. 1945-1966.

Jaya, Nagamani B and Jayaram, Vikram (2014) Crack stability in edge-notched clamped beam specimens: modeling and experiments. In: INTERNATIONAL JOURNAL OF FRACTURE, 188 (2). pp. 213-228.

Jaya, Nagamani B and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. In: PHILOSOPHICAL MAGAZINE, 92 (25-27,). pp. 3326-3345.

Jayadevan, KP and Jacob, KT (2000) Stability of CU(2)Ln(2)O(5) compounds - Comparison, assessment and systematics. In: High Temperature Materials and Processes, 19 (6). pp. 389-397.

Jayadevan, KP and Jacob, KT (2000) Trends in the stability of ternary oxides: Systems M-Pb-O (M = Ca, Sr, Ba). In: High Temperature Materials and Processes, 19 (6). pp. 399-407.

Jayadevan, KP and Kumar, NV and Mallya, RM and Jacob, KT (2000) Use of metastable, dissociated and charged gas species in synthesis: a low pressure analogue of the high pressure technique. In: Journal Of Materials Science, 35 (10). pp. 2429-2434.

Jayaganthan, R and Hajra, JP (1998) Activities of Al in the Al-Ga-In-Sb system in the temperature range of 1073-1273 K. In: Scripta Materialia, 39 (1). pp. 1-5.

Jayaganthan, R and Hajra, JP (1997) Applicability of a dilute quaternary model in interpreting the thermodynamic properties of the Fe-Ni-Ta-N system. In: Scripta Materialia, 37 (10). pp. 1539-1544.

Jayaganthan, R and Hajra, JP (1996) Thermodynamics and phase equilibria in the A1-Ga system. In: Materials Science & Engineering B, 38 (1-2). pp. 96-102.

Jayaganthan, R and Hajra, JP (1998) Thermodynamics and phase equilibria in the Al-In-Sb system. In: Metallurgical and Materials Transactions A, 29 (2). pp. 611-616.

Jayanthi, Swetha and Eswar, Neerugatti KrishnaRao and Singh, Satyapaul A and Chatterjee, Kaushik and Madras, Giridhar and Sood, AK (2016) Macroporous three-dimensional graphene oxide foams for dye adsorption and antibacterial applications. In: RSC ADVANCES, 6 (2). pp. 1231-1242.

Jayanthi, Swetha and Jayaraman, N and Chatterjee, Kaushik and Sampath, S and Sood, A K (2019) Giant dielectric macroporous graphene oxide foams with aqueous salt solutions: Impedance spectroscopy. In: CARBON, 155 . pp. 44-49.

Jayanthi, Swetha and Mukherjee, Anwesha and Chatterjee, Kaushik and Sood, AK and Misra, Abha (2016) Tailored nitrogen dioxide sensing response of three-dimensional graphene foam. In: SENSORS AND ACTUATORS B-CHEMICAL, 222 . pp. 21-27.

Jayanthi, VE and Rajamani, V and Karthikayen, P (2011) Performance analysis for geometrical attack on digital image watermarking. In: International Journal of Electronics, 98 (11). pp. 1565-1580.

Jayaram, M (1981) Grammatical Factors In Stuttering. In: Journal of the Indian Institute of Science, 63 (6). pp. 141-147.

Jayaram, V (1998) Low temperature consolidation of metastable phases in the Al2O3-ZrO2 binary system. In: 6th Meeting of the International Conference on Ceramic Processing Science, SEP 07-10, 1997, Santa Barbara, California.

Jayaram, V (2023) METASTABLE CERAMIC OXIDES: SYNTHESIS AND CHARACTERISATION OF METASTABLE CERAMIC OXIDES. [Book Chapter]

Jayaram, V (2022) Small-Scale Mechanical Testing. In: Annual Review of Materials Research, 52 . pp. 473-523.

Jayaram, V (1996) The role of volatile solute elements in directed melt oxidation of aluminium alloys. In: Journal of Materials Science, 31 (17). pp. 4591-4598.

Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.

Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.

Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.

Jayaram, V and Daniel, BS and Nagendra, N and Muralidhar, HR (1994) MMC, CMC And Microstructural Gradients by Nitridation of al Alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Jayaram, V and Daniel, BSS and Nagendra, N (1994) MMC, CMC AND Microstructural gradients by nitridation of al alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.

Jayaram, V and De Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). pp. 1829-1846.

Jayaram, V and Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). 1829 -1846 .

Jayaram, V and Kumar, S and Mani, TV and Saifullah, MSM and Sarkar, J and Warrier, KGK (1996) Infiltration of Al2O3-Al composites into coated silicon carbide. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, INDIAN INST SCI, BANGALORE, INDIA.

Jayaram, V and Mishra, RS and Majumdar, B and Lesher, C and Mukherjee, A (1998) Dense nanometric ZrO2---Al2O3 from spray-pyrolysed powders. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 25-31.

Jayaram, V and Viswanathan, NN and Abinandanan, TA (1999) A dislocation pile-up model for the yield stress of a composite. In: Acta Materialia, 47 (5). pp. 1635-1643.

Jayaram, Vikram and Rajkumar, J and Rani, Sirisha B (1999) Synthesis of metastable, wurzite-based zinc oxide-cobalt(II) oxide solid solutions by spray pyrolysis. In: Journal of the American Ceramic Society, 82 (2). pp. 473-476.

Jayaram, Vikram and Rani, Sirisha B (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO–MO (M=Mg,Co,Ni). In: Materials Science and Engineering A, 304-30 . pp. 800-804.

Jayaraman, Ashwin and Kiran, M S R N and Ramamurty, Upadrasta (2017) Mechanical Anisotropy in Austenitic NiMnGa Alloy: Nanoindentation Studies. In: CRYSTALS, 7 (8).

Jayaraman, N and Rao, MM (1980) Kinetics of austenite reversion in fe-ni-mn alloys I-Studies in ternary fe--12ni-4mn alloy by dilatometry. In: Journal of Metals, 32 (8). pp. 48-49.

Jayaraman, V and Periaswami, G and Kutty, TRN (2000) Extended stability ranges of \beta-aluminas with increasing ionic radii of metal alkali ions. In: Materials Letters, 45 (02). pp. 71-78.

Jayasekhar Babu, P and Saranya, S and Singh, YD and Venkataswamy, M and Raichur, AM and Doble, M (2021) Photoluminescence carbon nano dots for the conductivity based optical sensing of dopamine and bioimaging applications. In: Optical Materials, 117 .

Jayasree, R and Indrakumar, S and Rana, D and Ramalingam, M and Kumar, TS (2017) Bone mineral-like nanoscale amorphous calcium phosphate derived from egg shells. In: Journal of Bionanoscience, 11 (4). pp. 297-300.

Jedelský, J and Malý, M and Vankeswaram, SK and Zaremba, M and Kardos, R and Csemány, D and �ervenec, A and Józsa, V (2024) Effects of secondary breakup, collision dynamics, gravity and evaporation on droplet size distribution in a pressure-swirl JET A-1 spray. In: Fuel, 359 .

Jeevan, HS and Ranganathan, S (2004) A new basis for the classification of quasicrystals. In: Journal of Non-Crystalline Solids, 334-33 . pp. 184-189.

Jeffes, JHE and Jacob, KT (1972) Physical chemistry of fire refining of copper. In: Metallurgical Chemistry Symposium . pp. 513-525.

Jeyakumar, M and Kumar, S (2005) Microstructural evolution of spray formed 7075 Al alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 617-623.

Jeyakumar, M and Kumar, S and Gupta, GS (2009) The Influence of Processing Parameters on Characteristics of an Aluminum Alloy Spray Deposition. In: Materials and Manufacturing Processes, 24 (6). pp. 693-699.

Jeyakumar, M and Gupta, GS and Kumar, Subodh (2008) Modeling of gas flow inside and outside the nozzle used in spray deposition. In: Journal of Materials Processing Technology, 203 (1-3). pp. 471-479.

Jeyakumar, M and Kumar, S and Gupta, GS (2010) Microstructure and Properties of the Spray-Formed and Extruded 7075 Al Alloy. In: Materials and Manufacturing Processes, 25 (8). pp. 777-785.

Jeykishan Kumar, K and Nath, B and Bhattacharjee, T and Ramamurthy, PC (2022) Steady State Electroluminescence Imaging of Perovskite Solar Cells. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore.

Jha, Animesh and Abraham, KP (1989) Dephosphorisation of Iron–Chrome Alloy with Ca–CaF2 Melt during Electro Slag Refining. In: ISIJ International, 29 (4). pp. 300-308.

Jha, PK and Golubnichiy, A and Sachdeva, D and Banerjee, A and Sai Gautam, G and Fichtner, M and Abakumov, AM and Barpanda, P (2024) Chimie Douce Derived Novel P2-Type Layered Oxide for Potassium-Ion Batteries. In: Advanced Functional Materials .

Jha, PK and Parate, SK and Sada, K and Yoshii, K and Masese, T and Nukala, P and Sai Gautam, G and Pralong, V and Fichtner, M and Barpanda, P (2024) A 3.2Â V Binary Layered Oxide Cathode for Potassium-Ion Batteries. In: Small .

Jha, PK and Totade, SN and Barpanda, P and Sai Gautam, G (2023) Evaluation of P3-Type Layered Oxides as K-Ion Battery Cathodes. In: Inorganic chemistry, 62 (37). pp. 14971-14979.

Jha, Pardeep K and Jha, Priyanka A and Singh, Prabhakar and Ranjan, Rajeev and Dwivedi, R K (2017) Sm/Ti co-substituted bismuth ferrite multiferroics: reciprocity between tetragonality and piezoelectricity. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 19 (38). pp. 26285-26295.

Jin, HW and Ayer, R and Koo, JY (2007) Reciprocating wear mechanisms in a Zr-based bulk metallic glass. In: Journal of Materials Research, 22 (2). pp. 264-273.

Jiran, E and Jacob, KT (1986) Computation of thermodynamic properties of multicomponent solutions: extension of Toop model. In: Metallurgical and Materials Transactions A, 17 (6). pp. 1102-1104.

Jiran, E and Jacob, KT (1983) Computation of thermodynamic properties of quaternary and higher order systems from binary data using shortest distance composition paths. In: Calphad, 7 (1). pp. 41-50.

Jithunlal, S and Joji, J and Arendra, S and Ramamurthy, PC (2024) Mechanically Robust Cellulose Film for Electronics Applications. In: UNSPECIFIED.

Jog, CS and Sankarasubramanian, R and Abinandanan, TA (2000) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates. In: Journal of the Mechanics and Physics of Solids, 48 (11). pp. 2363-2389.

Johannesson, B and Ogin, SL and Surappa, MK and Tsakiropoulos, P and Brynjolfsson, S and Thorbjornsson, IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. In: Scripta Materialia, 45 (8). pp. 993-1000.

Joji, J and Adiga, V and Nath, B and Ramamurthy, PC (2023) A step towards RoHS compliance for perovskite devices by using a novel lead-capturing encapsulant. In: Materials Today Sustainability, 23 .

Joji, J and Adiga, V and Ramamurthy, PC and Sutherland, L and Weerasinghe, H (2022) Development of roll- to-roll coated ZIF-67-Modified on PET as an emerging encapsulant for photovoltaics. In: 2022 IEEE International Conference on Emerging Electronics, 11-14 December 2022, Bangalore, India.

Jose, Feby and Ramaseshan, R and Sundari, Tripura S and Dash, S and Tyagi, AK and Kiran, MSRN and Ramamurty, U (2012) Nanomechanical and optical properties of highly a-axis oriented AlN films. In: APPLIED PHYSICS LETTERS, 101 (25).

Jose, Feby and Ramaseshan, R and Sundari, Tripura S and Dash, S and Tyagi, AK and Kiran, MSRN and Ramamurty, U (2014) Nanomechanical and optical properties of highly a-axis oriented AlN films (vol 101, 254102, 2012). In: APPLIED PHYSICS LETTERS, 105 (7).

Joseph, A and Mathai, G and Schwandt, C and Ramamurthy, PC and Subramanian, S (2023) A Fluorescence Probe for “Turn-Off” Heavy-Metal-Ion Sensing – Synthesis and Characterization of a Dipyrromethene p-Phenylenevinylene Conjugated Copolymer and Its Electronic and Optical Properties. In: ChemistrySelect, 8 (13).

Joseph, Alex and Ramamurthy, Praveen C and Subramanian, Sankaran (2011) Imidazole Functionalized Polyaniline: Synthesis, Characterization, and Cu (II) Coordination Studies. In: Journal of Applied Polymer Science, 123 (1). pp. 526-534.

Joseph, Alex and Subramanian, Sankaran and Ramamurthy, Praveen C and Sampath, Srinivasan and Kumar, Vasant R and Schwandt, Carsten (2015) Amine Functionalized polyaniline grafted to exfoliated graphite oxide: Synthesis, characterization and multi-element sensor studies. In: JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 757 . pp. 137-143.

Joseph, Alex and Subramanian, Sankaran and Ramamurthy, Praveen C and Sampath, Srinivasan and Kumar, Vasant R and Schwandt, Carsten (2014) Iminodiacetic acid functionalized polypyrrole modified electrode as Pb(II) sensor: Synthesis and DPASV studies. In: ELECTROCHIMICA ACTA, 137 . pp. 557-563.

Joseph, Sudha and Kumar, S (2015) Finite Element Analysis of Stress Evolution in Al-Si Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 253-260.

Joseph, Sudha and Kumar, S (2015) Role of Si modification on the compressive flow behavior of Al-Si based alloy. In: MATERIALS CHARACTERIZATION, 110 . pp. 272-281.

Joseph, Sudha and Kumar, S (2013) A systematic investigation of fracture mechanisms in Al-Si based eutectic alloy-Effect of Si modification. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 588 . pp. 111-124.

Joseph, Sudha and Kumar, S and Babu, Prasath R (2015) Compressive flow behavior of Al-Si based alloy: Role of heat treatment. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 629 . pp. 41-53.

Joseph, Sudha and Kumar, S and Bhadram, Venkata Srinu and Narayana, Chandrabhas (2015) Stress states in individual Si particles of a cast Al-Si alloy: Micro-Raman analysis and microstructure based modeling. In: JOURNAL OF ALLOYS AND COMPOUNDS, 625 . pp. 296-308.

Joseph, Sudha and Tewari, Asim and Kumar, S (2013) The Fracture Characteristics of a Near Eutectic Al-Si Based Alloy Under Compression. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (5). pp. 2358-2368.

Joseyphus, Justin R and Narayanasamy, A and Sivakumar, N and Guyot, M and Krishnan, R and Ponpandian, N and Chattopadhyay, K (2004) Mechanochemical decomposition of Gd3Fe5O12 garnet phase. In: Proceedings of the International Conference on Magnetism (ICM 2003), JUL 27-AUG 01, 2003, Rome, ITALY.

Joseyphus, RJ and Narayanasamy, A and Sivakumar, N and Guyot, M and Krishnan, R and Ponpandian, N and Chattopadhyay, K (2004) Mechanochemical decomposition of $Gd_{3}Fe_{5}O_{12}$ garnet phase. In: Journal of Magnetism and Magnetic Materials, 272 (3). pp. 2257-2259.

Joshi, A and Choudhury, S and Asthana, S and Homer-Vanniasinkam, S and Nambiar, U and Chatterjee, K (2023) Emerging 4D fabrication of next-generation nerve guiding conduits: a critical perspective. In: Biomaterials Science, 11 (24). pp. 7703-7708.

Joshi, A and Choudhury, S and Baghel, VS and Ghosh, S and Gupta, S and Lahiri, D and Ananthasuresh, GK and Chatterjee, K (2023) 4D Printed Programmable Shape-Morphing Hydrogels as Intraoperative Self-Folding Nerve Conduits for Sutureless Neurorrhaphy. In: Advanced Healthcare Materials .

Joshi, A and Choudhury, S and Gugulothu, SB and Visweswariah, SS and Chatterjee, K (2022) Strategies to Promote Vascularization in 3D Printed Tissue Scaffolds: Trends and Challenges. In: Biomacromolecules, 23 (7). pp. 2730-2751.

Joshi, A and Kaur, T and Joshi, A and Gugulothu, SB and Choudhury, S and Singh, N (2022) Light-Mediated 3D Printing of Micro-Pyramid-Decorated Tailorable Wound Dressings with Endogenous Growth Factor Sequestration for Improved Wound Healing. In: ACS Applied Materials and Interfaces .

Joshi, Chaitanya and Abinandanan, TA and Choudhury, Abhik (2016) Phase field modelling of rayleigh instabilities in the solid-state. In: ACTA MATERIALIA, 109 . pp. 286-291.

Joshi, Chaitanya and Abinandanan, TA and Mukherjee, Rajdip and Choudhury, Abhik (2017) Destabilisation of nanoporous membranes through GB grooving and grain growth. In: COMPUTATIONAL MATERIALS SCIENCE, 139 . pp. 75-83.

Joshi, N and Jagadeshvaran, PL and Menon, AV and Bose, S (2022) Neutron scattering investigation of carbon nanotube-polymer composites. [Book Chapter]

Joshi, Sri Raghunath and Vamsi, KV and Karthikeyan, S (2014) First principles study of structural stability and site preference in Co-3 (W,X). In: 2nd European Symposium on Superalloys and their Applications, MAY 12-16, 2014, Giens, FRANCE.

Jothiramalingam, K and Dhineshbabu, NR and Srither, SR (2018) Study the Complex Dielectric and Energy loss function of Graphene oxide nanostructures using linear optical constant. In: IEEE Conference on Emerging Devices and Smart Systems, ICEDSS 2018, 2 - 3 March 2018, Tamilnadu, pp. 209-212.

Jouquet, Pascal and Guilleux, Nabila and Chintakunta, Sreenivasulu and Mendez, Mercedes and Subramanian, Sankaran and Shanbhag, Rashmi Ramesh (2015) The influence of termites on soil sheeting properties varies depending on the materials on which they feed. In: EUROPEAN JOURNAL OF SOIL BIOLOGY, 69 . pp. 74-78.

Jouquet, Pascal and Guilleux, Nabila and Shanbhag, Rashmi Ramesh and Subramanian, Sankaran (2015) Influence of soil type on the properties of termite mound nests in Southern India. In: APPLIED SOIL ECOLOGY, 96 . pp. 282-287.

Juneja, JM and Abraham, KP and Iyengar, GNK (1986) Thermodynamic study of liquid magnesium-aluminium alloys by vapour pressure measurement using the boiling point method. In: Scripta Metallurgica, 20 (2). pp. 177-180.

Jyotheender, K S and Srivastava, C (2021) Correlating the Five-Parameter Grain Boundary Character Distribution and Corrosion Behavior of Zinc-Carbon Nanotube Composite Coatings. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (1). pp. 364-377.

Jyotheender, K Sai and Srivastava, Chandan (2022) Effect of geometrically necessary dislocations induced strain on the corrosion behavior of Ni coatings with different surfactants. In: Materialia, 22 . ISSN 25891529

Jyotheender, KS and Arora, S and Srivastava, C (2021) Effect of carbon nanotube incorporation on texture evolution and grain boundary constitution in NiCo coatings. In: Journal of Alloys and Compounds, 854 .

Jyotheender, KS and Mathai, M and Makineni, SK and Srivastava, C (2023) Nickel partitioning in ZnNi coatings (Ni less than 4 wt.%) and its effect on the coating corrosion behaviour. In: Philosophical Magazine .

Jyotheender, KS and Srivastava, C (2023) Deposition Current Density Induced Alterations in Texture and Grain Boundary Constitution of Electrodeposited Zinc Coatings for Enhanced Corrosion Resistance Performance. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Jyothi, N and Sudha, KN and Natarajan, KA (1989) Electrochemical Aspects of Selective Bioleaching of Sphalerite and Chalcopyrite from Mixed Sulfides. In: International Journal of Mineral Processing, 27 (3-4). pp. 189-203.

K

K, Padmanabhan and *, Kishore (1992) Influence of Circular Defects on the Flexural Strength of Kevlar/Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 11 (2). pp. 211-219.

Kadambi, Sourabh B and Divya, VD and Ramamurty, U (2017) Evaluation of Solid-Solution Hardening in Several Binary Alloy Systems Using Diffusion Couples Combined with Nanoindentation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 4574-4582.

Kadambi, Sourabh B and Pramoda, K and Ramamurty, U and Rao, CNR (2015) Carbon-Nanohorn-Reinforced Polymer Matrix Composites: Synergetic Benefits in Mechanical Properties. In: ACS APPLIED MATERIALS & INTERFACES, 7 (31). pp. 17016-17022.

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.

Kaippamangalath, N and Rajan, AC and Ramamurthy, PC (2023) Engineering conjugated porous polymers for nitroaromatic sensing. In: Chemical Papers .

Kaka, F and Keshav, M and Ramamurthy, PC (2022) Optimising the photovoltaic parameters in donor�acceptor�acceptor ternary polymer solar cells using Machine Learning framework. In: Solar Energy, 231 . pp. 447-457.

Kaka, F and Khanna, S and Ramamurthy, PC and Choudhury, A (2020) Investigation of process-structure-property relationship in ternary organic photovoltaics. In: Journal of Applied Physics, 128 (14).

Kalasad, MN and Rabinal, MK and Mulimani, BG and Avadhani, GS (2008) Temporal evolution of capped cadmium sulfide nanoparticles. In: Semiconductor Science and Technology, 23 . 045009: 1-5.

Kalaskar, Abhijeet and Rao, Badari Narayana and Thomas, Tiju and Ranjan, Rajeev (2015) Electric field induced short range to long range structural ordering and its influence on the Eu+3 photoluminescence in the lead-free ferroelectric Na1/2Bi1/2TiO3. In: JOURNAL OF APPLIED PHYSICS, 117 (24).

Kale, GM and Jacob, KT (1989) Gibbs energy of formation of co2sio4 and phase-relations in the system co-si-o. In: Mineral Processing and Extractive Metallurgy (IMM Transactions Section C), 98 . C117 -C122.

Kale, GM (1992) Discussion of ``phase diagram of Cu2O-CuO-Y2O3 system in air''. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (1). p. 382.

Kale, GM and Asokan, T (1993) Electrical properties of cobalt‐zinc ferrites. In: Applied Physics Letters, 62 (19). pp. 2324-2325.

Kale, GM and Jacob, KT (1992) Chemical potential of oxygen for iron-rutile-ilmenite and iron-ilmenite-ulvospinel equilibria. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 57-64.

Kale, GM and Jacob, KT (1989) Gibbs Energies of Formation of $CuYO_2$ and $Cu_2Y_2O_5$ and Phase Relations in the System Cu-Y-O. In: Chemistry of Materials, 1 (5). pp. 515-519.

Kale, GM and Jacob, KT (1989) Phase relations and thermodynamic properties of compounds in the pseudobinary system BaO-Y2O3. In: Solid State Ionics, 34 (4). pp. 247-252.

Kale, GM and Jacob, KT (1989) Thermodynamic Stability of Potassium-beta-Alumina. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 20 (5). pp. 687-691.

Kale, GM and Jacob, KT (1989) Thermodynamic partial properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.

Kale, GM and Jacob, KT (1989) properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.

Kale, GM and Pandit, SS and Jacob, KT (1988) Thermodynamics of Cobalt (II, III) Oxide (Co3O4): Evidence of Phase Transition. In: Nippon Kinzoku Gakkai Kaiho (alternate title), 29 (2). pp. 125-132.

Kale, Girish M (1991) Activity–Composition Relations in the Nickel Oxide–Magnesium Oxide System at 1300 K by the Solid-State Galvanic Cell Technique. In: Journal of the American Ceramic Society, 74 (9). 2209 -2213.

Kale, Girish M and Jacob, KT and Wang, Ling and Hong, Yanruo (2006) Solid state electrochemical sensor for monitoring Mg in Al refining process. In: Electrochemical Society Transactions, 1 (13). pp. 1-11.

Kallarackel, Thomas Jacob and Gupta, Sapna and Singh, Prabhakar (2013) Thermodynamic Properties of LaCrO4, La2CrO6, and La2Cr3O12, and Subsolidus Phase Relations in the System Lanthanum-Chromium-Oxygen. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 96 (12). pp. 3933-3938.

Kalsar, R and Madhavan, R and Ray, RK and Suwas, S (2020) Texture transition in Al�Mg alloys: effect of magnesium. In: Philosophical Magazine, 100 (16). pp. 2143-2164.

Kalsar, R and Madhavan, R and Suwas, S (2021) Texture evolution in platinum: the role of non-octahedral slip. In: Philosophical Magazine Letters .

Kalsar, R and Sanamar, S and Schell, N and Brokmeier, H G and Saha, R and Ghosh, P and Bhagat, A N and Suwas, S (2020) Elemental partitioning in medium Mn steel during short-time annealing: An in-situ study using synchrotron x-rays. In: Materialia, 9 .

Kalsar, R and Sanamar, S and Schell, N and Brokmeier, H-G and Saha, R and Ghosh, P and Suwas, S (2022) In-situ study of tensile deformation behaviour of medium Mn TWIP/TRIP steel using synchrotron radiation. In: Materials Science and Engineering A, 857 .

Kalsar, R and Suwas, S (2018) Evolution of texture in some Mn steel. [Book Chapter]

Kalsar, R and Yadav, D and Sharma, A and Brokmeier, HG and May, J and Höppel, HW and Skrotzki, W and Suwas, S (2020) Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys. In: Materials Science and Engineering A, 797 .

Kalsar, Rajib and Khandal, Priyanka and Suwas, Satyam (2019) Effects of Stacking Fault Energy on Deformation Mechanisms in Al-Added Medium Mn TWIP Steel. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (8). pp. 3683-3696.

Kalsar, Rajib and Kumar, Lailesh and Suwas, Satyam (2018) Grain Boundary Engineering of Medium Mn TWIP Steels: A Novel Method to Enhance the Mechanical Properties. In: ISIJ INTERNATIONAL, 58 (7). pp. 1324-1331.

Kalsar, Rajib and Ray, Ranjit Kumar and Suwas, Satyam (2018) Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 729 . pp. 385-397.

Kalsar, Rajib and Suwas, Satyam (2017) Deformation mechanisms during large strain deformation of high Mn TWIP steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 700 . pp. 209-219.

Kalsar, Rajib and Suwas, Satyam (2018) Texture evolution in medium Mn containing TWIP steel: Experiments and Simulation. In: 18th International Conference on Textures of Materials (ICOTOM), NOV 06-10, 2017, St George, UT.

Kalsar, Rajib and Suwas, Satyam (2018) A novel way to enhance the strength of twinning induced plasticity (TWIP) steels. In: SCRIPTA MATERIALIA, 154 . pp. 207-211.

Kalyani, Ajay Kumar and Brajesh, Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2014) Orthorhombic-tetragonal phase coexistence and enhanced piezo-response at room temperature in Zr, Sn, and Hf modified BaTiO3. In: APPLIED PHYSICS LETTERS, 104 (25).

Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2009) Competing A-site and B-site driven ferroelectric instabilities in the (1-x)PbTiO3-(x)BiAlO3 system. In: Applied physics letters, 94 (20). 202903-1-202903-3.

Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2009) Tendency to promote ferroelectric distortion in Pr-modified PbTiO3. In: Applied physics letters, 95 (22).

Kalyani, Ajay Kumar and Khatua, Dipak Kumar and Loukya, B and Datta, Ranjan and Fitch, Andy N and Senyshyn, Anatoliy and Ranjan, Rajeev (2015) Metastable monoclinic and orthorhombic phases and electric field induced irreversible phase transformation at room temperature in the lead-free classical ferroelectric BaTiO3. In: PHYSICAL REVIEW B, 91 (10).

Kalyani, Ajay Kumar and Krishnan, Hari and Sen, Arijit and Senyshyn, Anatoliy and Ranjan, Rajeev (2015) Polarization switching and high piezoelectric response in Sn-modified BaTiO3. In: PHYSICAL REVIEW B, 91 (2).

Kalyani, Ajay Kumar and Lalitha, K and James, Ajit R and Fitch, Andy and Ranjan, Rajeev (2015) Unraveling the nature of electric field- and stress- induced structural transformations in soft PZT by a new powder poling technique. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 27 (7).

Kalyani, Ajay Kumar and Ranjan, Rajeev (2013) Anomalous piezoelectric response due to stabilization of two ferroelectric phases in Zr-modified BaTiO3. In: Journal of Physics: Condensed Matter, 25 (36). 362203_1-362203_6.

Kalyani, Ajay Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Polymorphic phase boundaries and enhanced piezoelectric response in extended composition range in the lead free ferroelectric BaTi1-xZrxO3. In: JOURNAL OF APPLIED PHYSICS, 114 (1).

Kamble, SN and Kubair, DV and Ramamurthy, U (2009) Indentation strength of a piezoelectric ceramic: Experiments and simulations. In: International Symposium on Indentation Behavior of Materials, MAR 2009, Hyderabad, pp. 926-935.

Kamble, S and Bosco, FSD and Gupta, GS (2022) Effect of Raceway Shape and Size on Gas and Fines Flow Behavior in a Packed Bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .

Kamble, S and Lakshminarasimha, S and Maurya, A and Gupta, GS (2020) Validation of Pressure Drop in Gas–Fine Flow in a Packed Bed with Various Types of Injection System (Lateral and Bottom). In: Transactions of the Indian Institute of Metals, 73 (8). pp. 2081-2087.

Kamble, Smita and Song, Duk-Yong and Dhavamani, Abitha and Gupta, Govind Sharan and Maruoka, Nobuhiro and Kitamura, Shin-ya and Shibata, Hiroyuki (2012) Modelling of metal-slag emulsion. In: 5th International Congress on the Science and Technology of Steel-making, OCT 01-03, 2012, Dresden, GERMANY, pp. 227-236.

Kamble, Vinayak B and Umarji, Arun M (2014) Correlating defect induced ferromagnetism and gas sensing properties of undoped tin oxide sensors. In: APPLIED PHYSICS LETTERS, 104 (25).

Kandalam, Sahithya and Agrawal, Priyanka and Avadhani, GS and Kumar, S and Suwas, Satyam (2014) Precipitation response of the magnesium alloy WE43 in strained and unstrained conditions. In: JOURNAL OF ALLOYS AND COMPOUNDS, 623 . pp. 317-323.

Kandalam, Sahithya and Sabat, RK and Bibhanshu, N and Avadhani, GS and Kumar, S and Suwas, Satyam (2017) Superplasticity in high temperature magnesium alloy WE43. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 687 . pp. 85-92.

Kandasamy, Ganeshlenin and Khan, Shaheen and Giri, Jyotsnendu and Bose, Suryasarathi and Veerapu, Naga Suresh and Maity, Dipak (2019) One-pot synthesis of hydrophilic flower-shaped iron oxide nanoclusters (IONCs) based ferrofluids for magnetic fluid hyperthermia applications. In: JOURNAL OF MOLECULAR LIQUIDS, 275 . pp. 699-712.

Kandasamy, Ganeshlenin and Soni, Shalini and Sushmita, Kumari and Veerapu, Naga Suresh and Bose, Suryasarathi and Maity, Dipak (2019) One-step synthesis of hydrophilic functionalized and cytocompatible superparamagnetic iron oxide nanoparticles (SPIONs) based aqueous ferrofluids for biomedical applications. In: JOURNAL OF MOLECULAR LIQUIDS, 274 . pp. 653-663.

Kandasamy, Ganeshlenin and Sudame, Atul and Maity, Dipak and Soni, Shalini and Sushmita, Kumari and Veerapu, Naga Suresh and Bose, Suryasarathi and Tomy, C (2019) Multifunctional magnetic-polymeric nanoparticles based ferrofluids for multi-modal in vitro cancer treatment using thermotherapy and chemotherapy. In: JOURNAL OF MOLECULAR LIQUIDS, 293 .

Kandpal, M and Shirhatti, V and Singh, J and Sontakke, BA and Jejusaria, A and Arora, SPS and Singh, S (2022) Experimental study of chromium oxide thin films as an intermediate layer for Pt-based temperature sensor applications. In: Journal of Materials Science: Materials in Electronics, 33 (27). 21287- 21296.

Kang, SC and Saito, M and Suzuki, S and Jacob, KT and Waseda, Y (2001) XPS study of surface properties in the superionic conducting glass of (AgI)(0.4)(Ag2O)(0.3)(MoO3)(0.3) bombarded by ion and electron beams. In: High Temperature Materials And Processes, 20 (1). pp. 51-56.

Kang, S and Waseda, Y and Jacob, KT and Saito, M (2000) Anomalous X-ray scattering study of local structures in the superionic conducting glass (AgBr)0.4 (Ag2O)0.3 (GeO2)0.3. In: Science and Technology of Advanced Materials, 1 (1). pp. 37-42.

Kang, S and Waseda, Y and Jacob, KT and Saito, M (2000) Transport properties of superionic conducting glasses (AgX)0.4(Ag2O)0.3(GeO2)0.3 (X = I, Br, Cl). In: Materials transactions - JIM, 41 (12). pp. 1670-1674.

Kanjilal, A and Kumar, P (2020) Insights into growth behavior of intermetallic compounds in Sn-Ag-Cu solder joints during mechanical and thermo-mechanical deformation processes. In: 2019 IEEE 21st Electronics Packaging Technology Conference, EPTC 2019, 4-6 Dec. 2019, Marina Bay Sands Convention Centre, Singapore, pp. 48-52.

Kanjilal, A and Narayanan, PR and Agilan, M and Kumar, P (2022) Effect of Joint Size on Creep Behavior of Sn-Ag-Cu Solder-Cu Joints. In: Journal of Electronic Materials .

Kanjilal, A and P, RN and Kumar, P (2022) Size dependent creep deformation of elastically constrained compliant metallic joints. In: Materialia, 21 .

Kanjilal, Anwesha and Jangid, Vikas and Kumar, Praveen (2017) Critical evaluation of creep behavior of Sn-Ag-Cu solder alloys over wide range of temperatures. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 703 . pp. 144-153.

Kanjilal, Anwesha and Kumar, Praveen (2018) Growth of Interfacial Intermetallic Compound Layer in Diffusion-Bonded SAC-Cu Solder Joints During Different Types of Thermomechanical Excursion. In: JOURNAL OF ELECTRONIC MATERIALS, 47 (1). pp. 457-469.

Kanjilal, Anwesha and Narayanan P, Ramesh and Kumar, Praveen (2022) Transition from necking to cavitation driven tertiary creep with length scale in constrained ductile metal joints. In: Materials Science and Engineering: A, 845 . ISSN 09215093

Kannan, C and Subramanian, S and Lahiri, AK (1989) Studies on slag-metal interface in electroslag casting using thermocouples. In: Transactions of the Indian Institute of Metals, 42 (5). pp. 499-502. (Unpublished)

Kannan, R and Rangaraj, L and Jayaram, V (2021) Reactive hot pressing of TiC0.5 ceramic at low applied pressure with 1 wt Ni additive. In: Journal of the American Ceramic Society .

Kannan, YB and Saravanan, R and Srinivasan, N and Praveena, K and Sadhana, K (2016) Synthesis and characterization of some ferrite nanoparticles prepared by co-precipitation method. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 27 (11). pp. 12000-12008.

Kano, S and Waseda, Y and Iwase, M and Jacob, KT (1992) A Sensor for Sulfur Gas Based on Silver β-Alumina. In: High Temperature Materials and Processes, 10 (2). pp. 101-105.

Kano, S and Waseda, Y and Jacob, KT (1992) A thermodynamic interpretation of the zonal arrangement of minerals in the bedded manganese deposits of the Noda tamagawa mine, Japan. In: High Temperature Materials and Processes, 10 (2). pp. 107-118.

Kapelko-Żeberska, M and Gryszkin, A and Zięba, T and Singh, Akhilesh Vikram (2017) Natural and Artificial Diversification of Starch. [Book Chapter]

Kapilashrami, A and Lahiri, AK and Seetharaman, S (2005) Bubble formation through reaction at liquid-liquid interfaces. In: Steel Research International, 76 (9). pp. 616-623.

Kapilashrami, A and Gornerup, M and Lahiri, AK and Seetharaman, S (2006) Foaming of slags under dynamic conditions. In: Metallurgical and Materials Transactions B, 37 (1). pp. 109-117.

Kapilashrami, A and Lahiri, Ashok Kumar and Gornerup, M and Seetharaman, S (2006) The fluctuations in slag foam under dynamic conditions. In: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 37 (1). pp. 145-148.

Kapilashrami, E and Jakobsson, A and Seetharaman, S and Lahiri, AK (2003) Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique. In: Metallurgical and Materials Transactions B, 34 (2). pp. 193-199.

Kapilashrami, E and Seetharaman, S and Lahiri, AK and Cramb, AW (2003) Investigation of the reactions between oxygen-containing iron and SiO2 substrate by X-ray sessile-drop technique. In: Metallurgical and Materials Transactions B, 34 (5). pp. 647-652.

Kapoor, V and Singh, B and Sai Gautam, G and Cheetham, AK and Canepa, P (2022) Rational Design of Mixed Polyanion Electrodes NaxV2P3- i(Si/S)iO12for Sodium Batteries. In: Chemistry of Materials, 34 (7). pp. 3373-3382.

Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .

Kar, A and Kailas, SV and Suwas, S (2020) Formation sequence of intermetallics and kinetics of reaction layer growth during solid state reaction between titanium and aluminum. In: Materialia, 11 (100702).

Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1533-1536.

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2018) Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (11). pp. 6016-6026.

Kar, Amlan and Suwas, Satyam and Kailas, Satish (2018) Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 733 . pp. 199-210.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100 (1-4). pp. 435-443.

Kar, Goutam Prasanna and Begam, Nafisa and Basu, JK and Bose, Suryasarathi (2014) Thermally Induced Demixing in an LCST Mixture in the Presence of Densely Grafted Nanoparticles: Tuning the Graft Chain Length To Induce Thermodynamic Miscibility. In: MACROMOLECULES, 47 (21). pp. 7525-7532.

Kar, Goutam Prasanna and Bharati, Avanish and Xavier, Priti and Madras, Giridhar and Bose, Suryasarathi (2015) The key role of polymer grafted nanoparticles in the phase miscibility of an LCST mixture. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (2). pp. 868-877.

Kar, Goutam Prasanna and Biswas, Sourav and Bose, Suryasarathi (2015) Simultaneous enhancement in mechanical strength, electrical conductivity, and electromagnetic shielding properties in PVDF-ABS blends containing PMMA wrapped multiwall carbon nanotubes. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (22). pp. 14856-14865.

Kar, Goutam Prasanna and Biswas, Sourav and Bose, Suryasarathi (2015) Tailoring the interface of an immiscible polymer blend by a mutually miscible homopolymer grafted onto graphene oxide: outstanding mechanical properties. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (3). pp. 1811-1821.

Kar, Goutam Prasanna and Biswas, Sourav and Bose, Suryasarathi (2016) Tuning the microwave absorption through engineered nanostructures in co-continuous polymer blends. In: MATERIALS RESEARCH EXPRESS, 3 (6).

Kar, Goutam Prasanna and Biswas, Sourav and Bose, Suryasarathi (2016) X-ray micro computed tomography, segmental relaxation and crystallization kinetics in interfacial stabilized co-continuous immiscible PVDF/ABS blends. In: POLYMER, 101 . pp. 291-304.

Kar, Goutam Prasanna and Biswas, Sourav and Rohini, Rani and Bose, Suryasarathi (2015) Tailoring the dispersion of multiwall carbon nanotubes in co-continuous PVDF/ABS blends to design materials with enhanced electromagnetic interference shielding. In: JOURNAL OF MATERIALS CHEMISTRY A, 3 (15). pp. 7974-7985.

Kar, Goutam Prasanna and Bose, Suryasarathi (2017) Nucleation barrier, growth kinetics in ternary polymer blend filled with preferentially distributed carbon nanotubes. In: POLYMER, 128 (SI). pp. 229-241.

Kar, Goutam Prasanna and Xavier, Priti and Bose, Suryasarathi (2014) Polymer-grafted multiwall carbon nanotubes functionalized by nitrene chemistry: effect on cooperativity and phase miscibility. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (33). pp. 17811-17821.

Karan, Goutam and Natarajan, KA and Modak, JM (1996) Estimation of mineral-adhered biomass of Thiobacillusferrooxidans by protein assay-some problems and remedies. In: Hydrometallurgy, 42 (02). pp. 169-175.

Karbowniczek, M and Migas, P and Mondal, MK and Banasik, L and Suwara, E and Gupta, GS (2018) The solid fine precipitates behaviour in fesicr solution during ladle rafination. In: 27th International Conference on Metallurgy and Materials, METAL 2018, 23 - 25 May 2018, Brno, pp. 615-621.

Karbowniczek, Miroslaw and Migas, Piotr and Mondal, Manas Kumar and Banasik, Lukasz and Suwara, Estera and Gupta, Govind Sharan (2018) THE SOLID FINE PRECIPITATES BEHAVIOUR IN FESICR SOLUTION DURING LADLE RAFINATION. In: UNSPECIFIED, MAY 23-25, 2018, Brno, CZECH REPUBLIC, pp. 615-621.

Karmakar, G and Sen, R and Meikap, AK and Chattopadhyay, SK and Chatterjee, SK and Surappa, MK (1999) The studies on micro-structural defects in deformed composite matrix of Al-Si-Mg and SiC. In: Japanese Journal of Applied Physics, 38 (11). pp. 6450-6453.

Karmakar, S and Deepak, MS and Nanda, OP and Sett, A and Maity, PC and Karmakar, G and Sha, R and Badhulika, S and Bhattacharyya, TK (2024) 2D V2C MXene Based Flexible Gas Sensor for Highly Selective and Sensitive Toluene Detection at Room Temperature. In: ACS Applied Electronic Materials .

Karthik, D and Deshmukh, K and Praveenkumar, K and Swaroop, S (2024) Laser peening induced mitigation of severe pitting corrosion in titanium stabilized 321 steel. In: Optics and Laser Technology, 172 .

Karthik, D and Yazar, K U and Bisht, Anuj and Swaroop, S and Srivastava, Chandan and Suwas, Satyam (2019) Gradient plastic strain accommodation and nanotwinning in multi-pass laser shock peened 321 steel. In: APPLIED SURFACE SCIENCE, 487 . pp. 426-432.

Karthikeyan, CS and Kishore, * and Sankaran, S (2000) Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams. In: Journal of Reinforced Plastics and Composites, 19 (9). pp. 732-742.

Karthikeyan, CS and Sankaran, S and Kishore, * (2007) Investigation of bending modulus of fiber-reinforced syntactic foams for sandwich and structural applications. In: Polymers for Advanced Technologies, 18 (3). pp. 254-256.

Karthikeyan, Chedarampet S and Sankaran, Sundaram and Kishore, * (2005) Flexural Behaviour of Fibre-Reinforced Syntactic Foams. In: Macromolecular Materials and Engineering, 290 (1). pp. 60-65.

Karthikeyan, S and Kolluri, M and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: Part II. Strain-Hardening Models. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2014-2023.

Karthikeyan, B and Sandeep, CS Suchand and Pandiyarajan, T and Venkatesan, P and Philip, Reji (2009) Optical and nonlinear absorption properties of Na doped ZnO nanoparticle dispersions. In: Applied Physics Letters, 95 (2).

Karthikeyan, CS and Kishore, * and Sankaran, S (2001) Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam. In: Journal of Reinforced Plastics and Composites, 20 (11). pp. 982-993.

Karthikeyan, CS and Sankaran, S and Kishore, * (2004) Elastic behaviour of plain and fibre-reinforced syntactic foams under compression. In: Materials Letters, 58 (6). pp. 995-999.

Karthikeyan, CS and Sankaran, S and Kishore, * (2000) Influence of chopped strand fibres on the flexural behaviour of a syntactic foam core system. In: Polymer International, 49 (2). pp. 158-162.

Karthikeyan, CS and Sankaran, S and Kumar, Jagdish MN and Kishore, * (2001) Processing and compressive strengths of syntactic foams with and without fibrous reinforcements. In: Journal of Applied Polymer Science, 81 (2). 405 -411.

Karthikeyan, S and Agrawal, A and Rigney, DA (2009) Molecular dynamics simulations of sliding in an Fe-Cu tribopair system. In: 17th International Conference on Wear of Materials, APR 19-23, Las Vegas, NV, pp. 1166-1176.

Karthikeyan, S and Unocic, RR and Sarosi, PM and Viswanathan, GB and Whitis, DD and Mills, MJ (2006) Modeling microtwinning during creep in Ni-based superalloys. In: Scripta Materialia, 54 (6). pp. 1157-1162.

Karthikeyan, Subramanian and Moon, Junho and Viswanathan, Gopal B and Mills, Michael J (2003) Application of a modified jogged-screw model for creep of titanium aluminides: evaluation of the key substructural parameters. In: MRS Proceedings in Multiscale Modeling of Materials, 2003.

Karthiselva, N S and Kashyap, Sanjay and Yadav, Devinder and Murty, B S and Bakshi, Srinivasa R (2017) Densification mechanisms during reactive spark plasma sintering of Titanium diboride and Zirconium diboride. In: PHILOSOPHICAL MAGAZINE, 97 (19, A). pp. 1588-1609.

Karuppaiah, C and Selvamani, M and Kesavan, AV and Ramamurthy, PC (2023) Modified anode/semiconductor interface by multiple plasmonic resonance bands:Experimental and simulation study. In: Surfaces and Interfaces, 40 .

Kasai, E and Saito, F and Waseda, Y and Jacob, KT and Hirota, K and Okabe, TH (1998) Thermodynamic properties of oxygen in RE-O (RE = Gd, Tb, Dy, Er) solid solutions. In: Journal of Alloys and Compounds, 279 (2). pp. 184-191.

Kashyap, A and Vishwanadh, B and Chauhan, A and Meka, SR (2024) Unusual plate-type iron-carbonitrides development in nitrocarburized Fe-4 at. V alloy. In: Acta Materialia, 263 .

Kashyap, KT and Murali, S and Raman, KS and Murthy, KSS (1993) Casting and heat treatment variables of Al–7Si–Mg alloy. In: Materials Science and Technology, 9 (3). pp. 189-203.

Kashyap, S and Chattopadhyay, K (2013) Synthesis and phase evolution in Nb/Si multilayers obtained by sequential laser ablation. In: THIN SOLID FILMS, 531 . pp. 312-319.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2011) Effect of Gallium on microstructure and mechanical properties of Nb-Si eutectic alloy. In: Intermetallics, 19 (12). pp. 1943-1952.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructural and mechanical behavior study of suction cast Nb-Si binary alloys. In: Materials Science and Engineering: A, 583 . pp. 188-198.

Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructure and mechanical properties of oxidation resistant suction cast Nb-Si-Al alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559 . pp. 74-85.

Kassner, ME and Oros, T and Kumar, P (2022) Comments on the Mechanism of Detachment in Creep of Dispersion Strengthened Alloys at High Temperatures. In: Metals, 12 (7).

Kasturi, TR and Ganesha Prasad, KB and Raju, GJ and Ramamurthy, V (1984) Novel photoisomerization of spirodienones. In: Tetrahedron Letters, 25 (21). pp. 2253-2254.

Katiyar, NK and Nellaiappan, S and Kumar, R and Malviya, KD and Pradeep, KG and Singh, AK and Sharma, SM and Tiwary, CS and Biswas, K (2020) Formic acid and methanol electro-oxidation and counter hydrogen production using nano high entropy catalyst. In: Materials Today Energy, 16 .

Katti, P and Verma, KK and Kumar, S and Bose, S (2021) Tuning the interface in epoxy-based composites and laminates through epoxy grafted graphene oxide enhances mechanical properties. In: Nanoscale Advances, 3 (23). pp. 6739-6749.

Katti, Prajakta and Bose, Suryasarathi and Kumar, S (2016) Tailored interface resulting in improvement in mechanical properties of epoxy composites containing poly (ether ether ketone) grafted multiwall carbon nanotubes. In: POLYMER, 102 . pp. 43-53.

Katti, Prajakta and Kundan, K V and Kumar, S and Bose, Suryasarathi (2017) Improved mechanical properties through engineering the interface by poly (ether ether ketone) grafted graphene oxide in epoxy based nanocomposites. In: POLYMER, 122 . pp. 184-193.

Katti, Prajakta and Kundan, KV and Kumar, S and Bose, Suryasarathi (2018) Poly(ether ether ketone)-Grafted Graphene Oxide ``Interconnects'' Enhance Mechanical, Dynamic Mechanical, and Flame-Retardant Properties in Epoxy Laminates. In: ACS OMEGA, 3 (12). pp. 17487-17495.

Kaur, Palvinder and Kumar, Sanjeev and Chen, Chi Liang and Hsu, Ying-Ya and Chan, Ting-Shan and Dong, Chung-Li and Srivastava, C and Singh, Anupinder and Rao, SM (2016) Investigations on structural, magnetic and electronic structure of Gd-doped ZnO nanostructures synthesized using sol-gel technique. In: APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 122 (3).

Kaur, Palvinder and Kumar, Sanjeev and Chen, Chi-Liang and Yang, Kai-Siang and Wei, Da-Hua and Dong, Chung-Li and Srivastava, C and Rao, S M (2017) Gd doping induced weak ferromagnetic ordering in ZnS nanoparticles synthesized by low temperature co-precipitation technique. In: MATERIALS CHEMISTRY AND PHYSICS, 186 . pp. 124-130.

Kaur, Palvinder and Kumar, Sanjeev and Singh, Anupinder and Chen, CL and Dong, CL and Chang, TS and Lee, KP and Srivastava, C and Rao, SM and Wu, MK (2015) Investigations on doping induced changes in structural, electronic structure and magnetic behavior of spintronic Cr-ZnS nanoparticles. In: SUPERLATTICES AND MICROSTRUCTURES, 83 . pp. 785-795.

Kaushal, S and Kishore, * (1992) Analysis of deformation behaviour and fracture features in glass-epoxy composites toughened by rubber and carbon additions. In: Journal of Materials Science Letters, 11 (2). pp. 86-88.

Kaushal, S and Tankala, T and Rao, RMVGK and Kishore, * (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. In: Journal of Materials Science, 26 (23). pp. 6293-6299.

Kaushik, D and Thomas, MJ (2023) Design of Multi-Layer and Multi-Turn Tooling Coils for Electromagnetic Pulse Forming Applications. In: UNSPECIFIED.

Kavitha, N and Chandramohan, A and Sharma, D and Dinakaran, K (2022) Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites. In: High Performance Polymers .

Kavitha, R and Hegde, SR and Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors. In: Materials Science and Engineering A, 359 (1-2). pp. 18-23.

Kavitha, R and Jayaram, V (2007) Band-Gap Engineering in ZnO-MgO Films Prepared by Combustion Flame Pyrolysis of Solution Precursors. In: Journal of Electronic Materials, 36 (10). pp. 1326-1332.

Kavitha, R and Jayaram, V (2007) Deposition and characterization of alumina films produced by combustion flame pyrolysis. In: Surface and Coatings Technology, 201 (6). pp. 2491-2499.

Kavitha, R and Meghani, S and Jayaram, V (2007) Synthesis of titania films by combustion flame spray pyrolysis technique and its characterization for photocatalysis. In: Materials Science and Engineering:B, 139 (2-3). pp. 134-140.

Kavitha, Ranganathan and Jayaram, Vikram (2010) Deposition of ZnO Films by Combustion Flame Pyrolysis of Solution Precursors. In: International Journal of Applied Ceramic Technology, 7 (4). pp. 482-492.

Kawasaki, Megumi and Ahn, Byungmin and Kumar, Praveen and Jang, Jae-il and Langdon, Terence G (2017) Nano-and Micro-Mechanical Properties of Ultrafine-Grained Materials Processed by Severe Plastic Deformation Techniques. In: ADVANCED ENGINEERING MATERIALS, 19 (1).

Keryvin, V and Prasad, Eswar K and Gueguen, Y and Sangleboeuf, JC and Ramamurty, U (2008) Temperature dependence of mechanical properties and pressure sensitivity in metallic glasses below glass transition. In: Philosophical Magazine, 88 (12). pp. 1773-1790.

Kesavan, AV and Adiga, V and Chandrasekar, GK and Panidhara, KM and Ramamurthy, PC (2022) Nanoscale small molecule self-assembled ITO for photon harvesting in polymer and perovskite solar cells. In: Solar Energy, 240 . pp. 201-210.

Kesavan, AV and Khot, AC and Dongale, TD and Son, KR and Ramamurthy, PC and Kim, TG (2022) Graphite-metal composite electrodes with a tunable work function for use in optoelectronic devices. In: Journal of Materials Chemistry C .

Kesavan, AV and Lee, BR and Son, KR and Khot, AC and Dongale, TD and Murugadoss, V and Ramamurthy, PC and Kim, TG (2021) Work Function-Tunable Amorphous Carbon-Silver Nanocomposite Hybrid Electrode for Optoelectronic Applications. In: ACS Applied Materials and Interfaces .

Kesavan, AV and Rao, AD and Ramamurthy, PC (2018) Polydispersed Metal Nanoparticles at the Interface for Improved Optoelectronic Properties in Perovskite Photovoltaics. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Kesavan, AV and Rao, AD and Ramamurthy, PC (2020) Tailoring optoelectronic properties of CH3NH3PbI3 perovskite photovoltaics using al nanoparticle modified PC61BM layer. In: Solar Energy, 201 . pp. 621-627.

Kesavan, AV and Selvamani, M and Ramamurthy, PC (2023) Enhancing optical absorption by reducing the trap states in polymer semiconductor processed for solar cell. In: Results in Optics, 10 .

Kesavan, Arul Varman and Jagdish, A K and Ramamurthy, Praveen C (2017) Light trapping and management in inverted organic solar cells employing metal nanoparticles. In: 43rd IEEE Photovoltaic Specialists Conference (PVSC), JUN 05-10, 2016, Portland, OR, pp. 328-333.

Kesavan, Arul Varman and Jagdish, A K and Ramamurthy, Praveen C (2017) Organic Inorganic Hybrid Hole Transport Layer for Light Management in Inverted Organic Photovoltaic. In: IEEE JOURNAL OF PHOTOVOLTAICS, 7 (3). pp. 787-791.

Kesavan, Arul Varman and Khanum, Khadija Kanwal and Subbiahraj, Saravanan and Ramamurthy, Praveen C (2019) Evaluation of Polymer Solar Cell Efficiency To Understand the Burn-in Loss. In: JOURNAL OF PHYSICAL CHEMISTRY C, 123 (37). pp. 22699-22705.

Kesavan, Arul Varman and Kumar, M P and Rao, Arun D and Ramamurthy, Praveen C (2019) Light management through up-conversion and scattering mechanism of rare earth nanoparticle in polymer photovoltaics. In: OPTICAL MATERIALS, 94 . pp. 286-293.

Kesavan, Arul Varman and Ramamurthy, Praveen C (2015) Effect of Micro-Structured Copper as Cathode Material for P3HT-Based Diode. In: IEEE TRANSACTIONS ON NANOTECHNOLOGY , MAR 2015, pp. 218-223.

Kesavan, Arul Varman and Ramamurthy, Praveen C (2017) Source materials grain size effect on electrode microstructure and its effect on conventional bulk hetero-junction photovoltaics. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 172 . pp. 244-251.

Kesavan, Arul Varman and Ramamurthy, Praveen Chandrashekarapura (2016) Nickel Electrode for Improving Current Density in Organic Electronic Device. In: IETE TECHNICAL REVIEW, 33 (1, SI). pp. 29-33.

Kesavan, Arul Varman and Rao, Arun D and Ramamurthy, Praveen C (2017) Interface Electrode Morphology Effect on Carrier Concentration and Trap Defect Density in an Organic Photovoltaic Device. In: ACS APPLIED MATERIALS & INTERFACES, 9 (34). pp. 28774-28784.

Kesavan, Arul Varman and Rao, Arun D and Ramamurthy, Praveen C (2017) Optical and electronic property tailoring by MoS2-polymer hybrid solar cell. In: ORGANIC ELECTRONICS, 48 . pp. 138-146.

Kesharwani, P and Deepika, D and Bharti, K and Jain, A and Sharma, S and Mishra, B and Kumar, V (2023) Pharmacotherapeutic and Computational Approaches for Biopharmaceutical Considerations towards Drug Development and Delivery against COVID-19. In: Letters in Applied NanoBioScience, 12 (4).

Kesharwani, P and Jain, A and Srivastava, AK and Keshari, MK (2020) Systematic development and characterization of curcumin-loaded nanogel for topical application. In: Drug Development and Industrial Pharmacy, 46 (9). pp. 1443-1457.

Kesharwani, P and Prajapati, SK and Jain, A and Sharma, S and Mody, N and Jain, A (2023) Biodegradable Nanogels for Dermal Applications: An Insight. In: Current Nanoscience, 19 (4). 509 -524.

Kesharwani, P and Prajapati, SK and Sharma, S and Jain, A and Mody, N (2022) A glimpse of biomedical application potential of biodegradable polymers for anticancer drug delivery. [Book Chapter]

Khaderi, SN and Scherer, MRJ and Hall, CE and Steiner, U and Ramamurty, U and Fleck, NA and Deshpande, VS (2017) The indentation response of Nickel nano double gyroid lattices. In: Extreme Mechanics Letters, 10 . pp. 15-23. ISSN 23524316

Khan, Bijoysri and Viswanath, B (2001) Effect of Water Absorption on the Impact Response of Carbon-Epoxy System Containing Buffer Strips. In: Journal of Reinforced Plastics and Composites, 20 (16). pp. 1430-1443.

Khan, Patan Yousaf and Bhattacharya, Victoria and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Melting and solidification behavior of Pb-Sn embedded alloy nano-particles. In: JOURNAL OF NANOPARTICLE RESEARCH, 15 (11).

Khana, Kirity Bhusan and Kutty, TRG and Surappa, MK (2006) Hot hardness and indentation creep study on Al5% Mg alloy matrixB4C particle reinforced composites. In: Materials Science And Engineering A, 427 (1-2). pp. 76-82.

Khandelwal, A and Chopdekar, R and Surampalli, A and Tiwari, K and Negi, N and Kalitsov, A and Wan, L and Katine, J and Stewart, D and Santos, T and Huang, Y-L and Ramesh, R and Prasad, B (2023) Voltage Control of Magnetism: Low-Power Spintronics. In: 2023 IEEE International Memory Workshop, IMW 2023, 21 - 24 May 2023, Monterey.

Khanna, S and Aramanda, SK and Choudhury, A (2020) Role of Solid�Solid Interfacial Energy Anisotropy in the Formation of Broken Lamellar Structures in Eutectic Systems. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (12). pp. 6327-6345.

Khanna, S and Choudhury, A (2021) Role of interfacial energy and liquid diffusivities on pattern formation during thin-film three-phase eutectic growth. In: Journal of Materials Science .

Khanna, S and Choudhury, A (2021) Three-Phase Eutectic Microstructures: Influence of Interfacial Energy Anisotropy and Solute Diffusivities. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 . pp. 4246-4263.

Khanum, KK and Akshay, GK and Biswas, S and Ramamurthy, PC (2022) Study of Various Electrospinning Parameters on Nanofibers Morphology for Flexible Devices. In: 5th IEEE International Conference on Emerging Electronics, ICEE 2020, 26 - 28 November 2020, New Delhi.

Khanum, KK and Kumar, MP and Ramamurthy, PC (2018) Optically Assorted Electrospun Nanofiber Mats of Electroactive Blends for Flexible Electronics. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Khanum, Khadija K and Ramamurthy, Praveen C (2017) Effect of molecular architecture on morphology in the nanostructures and its applications in superhydrophobicity and organic photovoltaics. In: JOURNAL OF MATERIALS SCIENCE, 53 (2). pp. 1264-1278.

Khanum, Khadija K and Ramamurthy, Praveen C (2016) Instigating network structure in bulk heterojunction organic solar cells creating a unique approach in augmenting the optical absorption. In: POLYMER, 91 . pp. 146-155.

Khanum, Khadija K and Rao, Abhishek and Balaji, NC and Mani, Monto and Ramamurthy, Praveen C (2017) Performance evaluation for PV systems to synergistic influences of dust, wind and panel temperatures: spectral insight. In: 43rd IEEE Photovoltaic Specialists Conference (PVSC), JUN 05-10, 2016, Portland, OR, pp. 1715-1718.

Khanum, Khadija K and Sandeep, BS and Ramamurthy, Praveen C (2015) Design and morphology control of a thiophene derivative through electrospraying using various solvents. In: RSC ADVANCES, 5 (74). pp. 60419-60425.

Khanum, Khadija Kanwal and Bora, Pritom J and Vinoy, KJ and Ramamurthy, Praveen C (2017) Evaluation of electromagnetic interference shielding using Poly(3,4-ethylenedioxythiophene) Polystyrene sulfonate blend. In: 3rd International Conference on Emerging Electronics, ICEE 2016, 27-30 December 2016, Mumbai, pp. 1-4.

Khanum, Khadija Kanwal and Krishnaswamy, Jagdish Anakkavoor and Ramamurthy, Praveen C (2017) Design and Fabrication of Photonic Structured Organic Solar Cells by Electrospraying. In: JOURNAL OF PHYSICAL CHEMISTRY C, 121 (15). pp. 8531-8540.

Khasnabis, S and Hs, MJ and Bora, PJ and Ramamurthy, PC (2022) Comparative studies on physical and chemical routes for animal waste-derived activated carbon for microwave absorption in the X-band. In: Journal of Materials Science: Materials in Electronics, 33 (7). pp. 3425-3437.

Khatua, DK and Kim, S-J (2022) A high performance piezoelectric-triboelectric hybrid energy harvester by synergistic design. In: Energy Advances (9). pp. 613-622.

Khatua, Dipak Kumar and Agarwal, Abhishek and Kumar, Naveen and Ranjan, Rajeev (2018) Probing local structure of the morphotropic phase boundary composition of Na0.5Bi0.5TiO3-BaTiO3 using rare-earth photoluminescence as a technique. In: ACTA MATERIALIA, 145 . pp. 429-436.

Khatua, Dipak Kumar and Agarwal, Abhishek and Mishra, Anupam and Das Adhikary, Gobinda and Senyshyn, Anatoliy and Ranjan, Rajeev (2018) Enhanced thermal stability of dielectric, energy storage, and discharge efficiency in a structurally frustrated piezoelectric system: Erbium modified Na0.5Bi0.5TiO3-BaTiO3. In: JOURNAL OF APPLIED PHYSICS, 124 (10).

Khatua, Dipak Kumar and Agarwal, Abhishek and Ranjan, Rajeev (2018) Investigating the electrical conduction and relaxation phenomena in rare earth erbium doped lead free 0.94Na(0.5)Bi(0.5)TiO(3)-0.06BaTiO(3) by impedance spectroscopy. In: JOURNAL OF APPLIED PHYSICS, 123 (7).

Khatua, Dipak Kumar and Kalaskar, Abhijeet and Ranjan, Rajeev (2016) Tuning Photoluminescence Response by Electric Field in Electrically Soft Ferroelectrics. In: PHYSICAL REVIEW LETTERS, 116 (11).

Khatua, Dipak Kumar and Lalitha, K and Fancher, Chris M and Jones, Jacob L and Ranjan, Rajeev (2016) Anomalous reduction in domain wall displacement at the morphotropic phase boundary of the piezoelectric alloy system PbTiO3-BiScO3. In: PHYSICAL REVIEW B, 93 (10).

Khatua, Dipak Kumar and Lalitha, K and Fancher, Chris M and Jones, Jacob L and Ranjan, Rajeev (2016) Coupled domain wall motion, lattice strain and phase transformation in morphotropic phase boundary composition of PbTiO3-BiScO3 piezoelectric ceramic. In: JOURNAL OF APPLIED PHYSICS, 120 (15).

Khatua, Dipak Kumar and Mehrotra, Tarang and Mishra, Anupam and Majumdar, Bhaskar and Senyshyn, Anatoliy and Ranjan, Rajeev (2017) Anomalous influence of grain size on the global structure, ferroelectric and piezoelectric response of Na0.5Bi0.5TiO3. In: ACTA MATERIALIA, 134 . pp. 177-187.

Khatua, Dipak Kumar and Senyshyn, Anatoliy and Ranjan, Rajeev (2015) Long-period modulated structure and electric-field-induced structural transformation in Na0.5Bi0.5TiO3-based lead-free piezoelectrics. In: PHYSICAL REVIEW B, 93 (13).

Kilo, Martin and Argirusis, Christos and Borchardt, Guenter and Ghosh, Santonu and Chokshi, Atul H (2008) Creep in scandia stabilized zirconia. In: Solid State Ionics, 179 (21-26). pp. 804-806.

Kim, DH and Chattopadhyay, K and Cantor, B (1990) An in situ electron microscope investigation of the icosahedral-to-decagonal quasicrystalline transformation in Al-20 at.% Mn. In: Philosophical Magazine A & B, 62 (2). pp. 157-171.

Kim, HJ and Karthikeyan, S and Rigney, D (2009) A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding. In: 17th International Conference on Wear of Materials, 19-23, Las Vegas, NV, pp. 1130-1136.

Kim, J-S and Maity, N and Kim, M and Fu, S and Juneja, R and Singh, A and Akinwande, D and Lin, J-F (2022) Strain-Modulated Interlayer Charge and Energy Transfers in MoS2/WS2Heterobilayer. In: ACS Applied Materials and Interfaces, 14 (41). pp. 46841-46849.

Kim, Ju-Heon and Kim, Dong-Ik and Suwas, Satyam and Fleury, Eric and Yi, Kyung-Woo (2013) Grain-Size Effects on the High-Temperature Oxidation of Modified 304 Austenitic Stainless Steel. In: OXIDATION OF METALS, 79 (3-4, S). pp. 239-247.

Kim, M and Upadhyay, A and Lim, K W and Zate, T T and Jeon, J H (2021) Optimisation of matrix composition for texturing of morphotropic phase boundary Pb(Mg1/3Nb2/3)O3�PbZrO3�PbTiO3 piezoelectric ceramics using BaTiO3 template. In: Journal of the European Ceramic Society .

Kim, SH and Chattopadhyay, K and Inkson, BJ and Möbus, G and Kim, WT and Kim, DH (2006) Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint. In: Journal of Materials Science, 41 (18). pp. 6081-6086.

Kim, SH and Chattopadhyay, K and Kim, KB and Kim, WT and Kim, DH (2006) Orthorhombic approximant phases and their relation to quasicrystals in mechanically alloyed Al–Cu–Fe–Si alloys. In: Philosophical Magazine Letters, 86 (7). pp. 425-433.

Kim, SH and Song, GS and Fleury, E and Chattopadhyay, K and Kim, WT and Kim, DH (2002) Icosahedral quasicrystalline and hexagonal approximant phases in the Al-Mn-Be alloy system. In: Philosophical Magazine A & B, 82 (8). pp. 1495-1508.

Kim , DH and Chattopadhyay, K and Cantor, B (1991) Quasicrystalline and related crystalline phases in a rapidly solidified 2024-2Li aluminium alloy. In: Acta Metallurgica et Materialia, 39 (5). pp. 859-875.

Kima, Hong Jin and Karthikeyan, S and David, Rigneya (2007) The structure and composition of aluminum wear debris generated by unlubricated sliding in different environments. In: Wear, 263 (1-6). pp. 849-857.

Kini, MK and Chokshi, AH (2020) Initial stage sintering of polycrystalline spheres: A model and experiments. In: Materialia, 10 (100665).

Kini, Maya and Chokshi, Atul H (2010) Creep in TiO2 doped Zirconia: Implications for high strain rate superplasticity. In: 15th International Conference on the Strength of Materials (ICSMA 15), AUG 16-21, 2009 , Dresden, GERMANY.

Kini, Maya and Chokshi, Atul H (2010) The Influence of Titania on Creep in Superplastic Zirconia. In: Journal of the American Ceramic Society, 93 (6). pp. 1725-1731.

Kini, Maya K (2018) Grain boundary crystallography in polycrystalline yttria-stabilised cubic zirconia. In: PHILOSOPHICAL MAGAZINE, 98 (20). pp. 1865-1883.

Kiran, MSRN and Krishna, Ghanashyam M and Padmanabhan, KA (2011) Substrate-dependent structure, microstructure, composition and properties of nanostructured TiN films. In: Solid State Communications, 151 (7). pp. 561-563.

Kiran, MSRN and Kshirsagar, S and Krishna, MG and Surya, Tewari P (2010) Structural, optical and nanomechanical properties of (1 1 1) oriented nanocrystalline ZnTe thin films. In: The European Physical Journal Applied Physics, 51 (1). 10502 .

Kiran, MSRN and Kshirsagar, S and Krishna, MG and Tewari, Surya P (2010) Structural, optical and nanomechanical properties of (1 1 1) oriented nanocrystalline ZnTe thin films. In: The European Physical Journal Applied Physics, 51 (1).

Kiran, MSRN and Raidongia, Kalyan and Ramamurty, U and Rao, CNR (2011) Improved mechanical properties of polymer nanocomposites incorporating graphene-like BN: Dependence on the number of BN layers. In: Scripta Materialia, 64 (6). pp. 592-595.

Kiran, MSRN and Ramamurty, U and Misra, Abha (2012) Mechanical and electrical contact resistance characteristics of a cellular assembly of carbon nanotubes. In: NANOTECHNOLOGY, 24 (1).

Kiran, MSRN and Varughese, Sunil and Ramamurty, U and Desiraju, Gautam R (2012) Effect of dehydration on the mechanical properties of sodium saccharin dihydrate probed with nanoindentation. In: CrystEngComm, 14 (7). pp. 2489-2493.

Kiran, MSRN and Varughese, Sunil and Reddy, Malla C and Ramamurty, U and Desiraju, Gautam R (2010) Mechanical Anisotropy in Crystalline Saccharin: Nanoindentation Studies. In: Crystal Growth & Design, 10 (10). pp. 4650-4655.

Kirchner, Michael T and Blaeser, Dieter and Boese, Roland and Thakur, Tejender S and Desiraju, Gautam R (2009) 1,2,3-Trifluorobenzene. In: Acta Crystallographica Section E, 65 (Part 1). O2670-U2920.

Kiruthika, P and Makineni, S K and Srivastava, C and Chattopadhyay, K and Paul, A (2017) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys (vol 105, pg 438, 2016). In: ACTA MATERIALIA, 122 . p. 512.

Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.

Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.

Kiruthika, Perumalsamy and Paul, Aloke (2015) A pseudo-binary interdiffusion study in the beta-Ni(Pt)Al phase. In: PHILOSOPHICAL MAGAZINE LETTERS, 95 (3). pp. 138-144.

Kishore, and Vasu, KI (1978) A study of the deformation slip lines in quenched and aged Al-2% Ge alloy. In: Metallography, 11 (1). pp. 51-59.

Kishore, * (1984) Some aspects of dislocation-precipitate interaction in under-aged aluminium-germanium alloy. In: Bulletin of Materials Science, 6 (6). pp. 1041-1046.

Kishore, * and Barpanda, P and Kulkarni, SM (2005) Compression Strength of Saline Water-exposed Epoxy System Containing Fly Ash Particles. In: Journal pf Reinforced Plastics and Composites, 24 (15). 1567-1576.

Kishore, * and Harimkar, SP and Desai, DS (2004) Impact response of epoxy systems containing short fibres and/or oxide particles as reinforcements. In: Polymer International, 53 (9). pp. 1274-1281.

Kishore, * and Khan, B (1998) Comparative evaluation of impact performance of laminate composites containing impact induced/mechanically inserted defects. In: Journal of Reinforced Plastics and Composites, 17 (16). pp. 1463-1471.

Kishore, * and Khan, Bijoysri and Viswanath, B (2000) Effect of insertion of buffer-strip on the response of carbon-epoxy system in short beam tests. In: Advanced Composites Letters, 9 (5). pp. 329-333.

Kishore, * and Kiran, Raghu TR (2006) Impact response in glass-epoxy system with and without perforated PTFE-bearing material at the mid-thickness. In: Composite Interfaces, 13 (7). pp. 633-646.

Kishore, * and Kumar, Kiran B (2004) The influence of the type and positioning of the interface material on the impact behaviour in two-layered epoxy pieces. In: Composite Interfaces, 11 (1). pp. 83-93.

Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Fractographic features of dry and water absorbed epoxy based ash filled particulate composites with and without surface treatments for fillers following short beam test. In: Practical Metallography, 40 (1). pp. 34-48.

Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Water Ingression and Compression Properties of Epoxy Containing Ash Particles with their Surfaces Containing Paraffin Oil Film. In: Journal of Reinforced Plastics and Composites, 22 (16). pp. 1467-1476.

Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Compression Strength of Aqueous Media Exposed Epoxy System Containing Silane Surface Bearing Fly Ash Particles. In: Journal of Reinforced Plastics and Composites, 23 (9). pp. 959-968.

Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Correlating failure features to impact data in epoxy systems without and with silane surface bearing fly ash filler particles in varying amounts. In: Praktische Metallographie-Practical Metallography, 41 (1). pp. 22-36.

Kishore, * and Venkatraman, S (1998) Failure features of foam bearing glass-epoxy composites subjected to compressive loading. In: Praktische Metallographie: Archives of Practical Metallography, 35 (1). pp. 31-39.

Kishore, * and Khan, B (1999) Micro and macroscopic features of impact failed defect induced carbon-epoxy composites. In: Praktische Metallographie / Practical Metallography, 36 (9). pp. 487-494.

Kishore, * and Khan, Bijoysri and Viswanath, B (2002) Impact Response of Carbon-Epoxy Laminates Containing Buffer-Strip Layers. In: Journal of Applied Polymer Science, 85 (4). pp. 752-761.

Kishore, * and Khan, Bijoysri and Viswanath, B (2001) On the utility of an instrumented impact set-up to characterise the response of discontinuous buffer strips in carbon–epoxy systems in dry and wet conditions. In: Polymer Testing, 20 (4). pp. 453-457.

Kishore, * and Kulkarni, SM and Sharathchandra, S and Sunil, D (2002) On the use of an instrumented set-up to characterize the impact behaviour of an epoxy system containing varying fly ash content. In: Polymer Testing, 21 (7). pp. 763-771.

Kishore, * and Kulkarni, SM and Sunil, D and Sharathchandra, S (2002) Effect of surface treatment on the impact behaviour of fly-ash filled polymer composites. In: Polymer International, 51 (12). pp. 1378-1384.

Kishore, * and Kumar, Keshav (1998) Sliding wear studies in epoxy containing alumina powders. In: High Temperature Materials and Processes, 17 (4). pp. 271-274.

Kishore, * and Maiti, A (2001) Compressive behavior and fracture features of rubber bearing glass-epoxy composites exposed to aqueous media. In: Journal of Reinforced Plastics and Composites, 20 (17). pp. 1546-1554.

Kishore, * and Ramanathan, S and Rao, RMVGK (1996) Repeated drop weight impacts and post-impact ILSS tests on glass-epoxy composite. In: Bulletin of Materials Science, 19 (6). pp. 1133-1141.

Kishore, * and Ravikumar, NL and Sunil, D (2003) The effect of a starch envelope on fly ash particles on the impact properties of filled epoxy composites. In: Advanced Composites Letters, 12 (2). pp. 45-54.

Kishore, * and Sampathkumaran, P and Seetharamu, S (2005) Erosion and abrasion characteristics of high manganese chromium irons. In: Wear, 259 (1-6). pp. 70-77.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (2001) On the SEM features of glass–epoxy composite system subjected to dry sliding wear. In: Wear, 247 (2). pp. 208-213.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Thomas, P and Janardhana, M (2005) A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and slide wear characteristics. In: Wear, 259 (1-6). pp. 634-641.

Kishore, * and Sampathkumaran, P and Seetharamu, S and Vynatheya, S and Murali, A and Kumar, RK (2000) SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. In: Wear, 237 (1). pp. 20-27.

Kishore, * and Santra, S (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part I - Room Temperature Curing. In: Journal of Reinforced Plastics and Composites, 24 (9). pp. 903-922.

Kishore, * and Santra, Sanjitarani (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part II -Comparison of Data and Fracture Features of the Samples Cured via a Single Room Temperature and Multiple High Temperatures. In: Journal of Reinforced Plastics and Composites, 24 (10). pp. 1013-1024.

Kishore, * and Santra, Sanjitarani (2005) Individual and Combined Roles of CTBN and Fly Ash in Epoxy System Under Compression: Correlation between Microscopic Features and Mechanical Behavior. In: Journal of Reinforced Plastics and Composites, 24 (3). pp. 299-313.

Kishore, * and Shankar, Ravi and Sankaran, S (2006) Effects of microballoons’ size and content in epoxy on compressive strength and modulus. In: Journal of Materials Science, 41 (22). pp. 7459-7465.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Gradient syntactic foams: Tensile strength, modulus and fractographic features. In: Materials Science and Engineering: A, 412 (1&2). pp. 153-158.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short Beam Three Point Bend Tests in Syntactic Foams. Part I: Microscopic Characterization of the Failure Zones. In: Journal of Applied Polymer Science, 98 (2). pp. 673-679.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Test Study in Syntactic Foam. Part III: Effects of Interface Modification on Strength and Fractographic Features. In: Journal of Applied Polymer Science, 98 . pp. 687-693.

Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Tests in Syntactic Foams. Part II: Effect of Microballoons Content on Shear Strength. In: Journal of Applied Polymer Science, 98 . pp. 680-686.

Kishore, * and Singh, VK (1999) Studies on the variations in compression strengths of graphite powders bearing glass-epoxy composites exposed to humid conditions. In: Journal of Reinforced Plastics and Composites, 18 (3). pp. 224-232.

Kishore, * and Sridhar, GB (2002) On evaluating erosion by sand particles in polythene system without and with ceramic particles. In: Polymer Testing, 21 (4). pp. 473-477.

Kishore, * and Vasu, KI (1972) Reply to comments on vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 6 (8). pp. 727-729.

Kishore, * and Vasu, KI (1971) Vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 5 (11). pp. 997-1000.

Kishore, * and Venkatraman, S (1998) Impact behavior of glass-epoxy composites containing foam material. In: Journal of Applied Polymer Science, 67 (09). pp. 1565-1571.

Kishore, * and Venkatraman, S (1999) Influence of foam/glass-epoxy interface on the macroscopic compressive failure features. In: Composite Interfaces, 6 (6). pp. 557-564.

Kishore, U Sudarsan (1986) Effect of load changes on dynamic coefficient of friction of crystalline and amorphous materials. In: Journal of Materials Science Letters, 5 (2). pp. 198-200.

Kishore, U Sudarsan and Chandran, N and Chattopadhyay, K (1987) On the wear mechanism of iron and nickel based transition metal-metalloid metallic glasses. In: Acta Metallurgica, 35 (7). pp. 1463-1473.

Kitchamsetti, N and Samtham, M and Singh, D and Choudhary, E and Rondiya, SR and Ma, Y-R and Cross, RW and Dzade, NY and Devan, RS (2023) Hierarchical 2D MnO2@1D mesoporous NiTiO3 core-shell hybrid structures for high-performance supercapattery electrodes: Theoretical and experimental investigations. In: Journal of Electroanalytical Chemistry, 936 .

Kobler, Aaron and Lohmiller, Jochen and Schaefer, Jonathan and Kerber, Michael and Castrup, Anna and Kashiwar, Ankush and Gruber, Patric A. and Albe, Karsten and Hahn, Horst and Kuebel, Christian (2013) Deformation-induced grain growth and twinning in nanocrystalline palladium thin films. In: BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 4 . pp. 554-566.

Kochat, Vidya and Sahoo, Anindita and Pal, Atindra Nath and Eashwer, Sneha and Ramalingam, Gopalakrishnan and Sampathkumar, Arjun and Tero, Ryugu and Thu, Tran Viet and Kaushal, Sanjeev and Okada, Hiroshi and Sandhu, Adarsh and Raghavan, Srinivasan and Ghosh, Arindam (2015) Origin of 1/f noise in graphene produced for large-scale applications in electronics. In: IET CIRCUITS DEVICES & SYSTEMS, 9 (1, SI). pp. 52-58.

Kochat, Vidya and Tiwary, Chandra Sekhar and Biswas, Tathagata and Ramalingam, Gopalakrishnan and Hsieh, Kimberly and Chattopadhyay, Kamanio and Raghavan, Srinivasan and Jain, Manish and Ghosh, Arindam (2016) Magnitude and Origin of Electrical Noise at Individual Grain Boundaries in Graphene. In: NANO LETTERS, 16 (1). pp. 562-567.

Kodentsov, Alexander and Paul, Aloke (2017) Diffusion Couple Technique: A Research Tool in Materials Science. [Book Chapter]

Kohli, R and Vasu, KI (1978) Oxidation-Kinetics of some Zirconium alloys at high-Temperatures. In: Indian Journal of Technology, 16 (3). 105-111 .

Kolanthai, Elayaraja and Bose, Suryasarathi and Bhagyashree, KS and Bhat, SV and Asokan, K and Kanjilal, D and Chatterjee, Kaushik (2015) Graphene scavenges free radicals to synergistically enhance structural properties in a gamma-irradiated polyethylene composite through enhanced interfacial interactions. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (35). pp. 22900-22910.

Kolanthai, Elayaraja and Colon, Sivaraj Dikeshwar V and Sindu, Abinaya P and Chandra, Sarath V and Karthikeyan, KR and Babu, Surendar M and Sundaram, Meenakshi S and Palanichamy, M and Kalkura, Narayana S (2015) Effect of solvent; enhancing the wettability and engineering the porous structure of a calcium phosphate/agarose composite for drug delivery. In: RSC ADVANCES, 5 (24). pp. 18301-18311.

Kolanthai, Elayaraja and Kalsar, Rajib and Bose, Suryasarathi and Suwas, Satyam and Chatterjee, Kaushik (2014) Combinatorial effect of rolling and carbonaceous nanoparticles on the evolution of crystallographic texture and structural properties of ultra high molecular weight polyethylene. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (42). pp. 23108-23117.

Kolanthai, Elayaraja and Sarkar, Kishor and Meka, Sai Rama Krishna and Madras, Giridhar and Chatterjee, Kaushik (2015) Copolyesters from Soybean Oil for Use as Resorbable Biomaterials. In: ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 3 (5). pp. 880-891.

Kole, AK and Biswas, S and Tiwary, CS and Kumbhakar, P (2016) A facile synthesis of graphene oxide-ZnS/ZnO nanocomposites and observations of thermal quenching of visible photoluminescence emission and nonlinear optical properties. In: JOURNAL OF LUMINESCENCE, 179 . pp. 211-221.

Kole, AK and Biswas, S and Tiwary, CS and Kumbhakar, P (2016) A facile synthesis of graphene oxide-ZnS/ZnO nanocomposites and observations of thermal quenching of visible photoluminescence emission and nonlinear optical properties. In: JOURNAL OF LUMINESCENCE, 179 . pp. 211-221.

Kole, AK and Gupta, S and Kumbhakar, P and Ramamurthy, PC (2014) Nonlinear optical second harmonic generation in ZnS quantum dots and observation on optical properties of ZnS/PMMA nanocomposites. In: OPTICS COMMUNICATIONS, 313 . pp. 231-237.

Kole, AK and Tiwary, CS and Kumbhakar, P (2013) Room temperature synthesis of Mn2+ doped ZnS d-dots and observation of tunable dual emission: Effects of doping concentration, temperature, and ultraviolet light illumination. In: JOURNAL OF APPLIED PHYSICS, 113 (11).

Kole, Arup Kanti and Tiwary, Chandra Sekhar and Kumbhakar, Pathik (2014) Effect of thermal annealing on dual photoluminescence emission characteristics of chemically synthesized uncapped Mn2+ doped ZnS quantum dots. In: JOURNAL OF LUMINESCENCE, 155 . pp. 359-367.

Kole, Arup Kanti and Tiwary, Chandra Sekhar and Kumbhakar, Pathik (2014) Morphology controlled synthesis of wurtzite ZnS nanostructures through simple hydrothermal method and observation of white light emission from ZnO obtained by annealing the synthesized ZnS nanostructures. In: JOURNAL OF MATERIALS CHEMISTRY C, 2 (21). pp. 4338-4346.

Kole, Arup Kanti and Tiwary, Chandra Sekhar and Kumbhak, Pathik (2013) Ethylenediamine assisted synthesis of wurtzite zinc sulphide nanosheets and porous zinc oxide nanostructures: near white light photoluminescence emission and photocatalytic activity under visible light irradiation. In: CRYSTENGCOMM, 15 (27). pp. 5515-5525.

Kolluri, M and Karthikeyan, S and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: I. Experiments. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2006-2013.

Kolluri, M and Mukherjee, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2008) Fatigue of a laterally constrained closed cell aluminum foam. In: Acta Materialia, 56 (5). 1114 - 1125.

Konganapuram Narasimma Bharathi, SS and Adiga, V and Khasnabis, S and Nath, B and Khan, NA and Ramamurthy, PC (2022) Study of nano cellulose-based membrane tailorable biodegradability for use in the packaging application of electronic devices. In: Chemosphere, 309 .

Kopanati, Gayathri N and Ramamurthy, Praveen C and Madras, Giridhar (2016) TiO2/EVOH based reactive interlayer in Surlyn for organic device encapsulation. In: MATERIALS RESEARCH EXPRESS, 3 (2).

Kopanati, Gayathri N and Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2015) A Surlyn/magnesium oxide nanocomposite as an effective water vapor barrier for organic device encapsulation. In: RSC ADVANCES, 5 (41). pp. 32580-32587.

Kopanati, Gayathri N and Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2014) Water Vapor Barrier Material by Covalent Self-Assembly for Organic Device Encapsulation. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 53 (46). pp. 17894-17900.

Korla, Rajesh and Chokshi, Atul H (2010) Strain-rate sensitivity and microstructural evolution in a Mg-Al-Zn alloy. In: Scripta Materialia, 63 (9). pp. 913-916.

Kothai, V and Babu, Prasath R and Ranjan, Rajeev (2013) Metastable morphotropic phase boundary state in the multiferroic BiFeO3-PbTiO3. In: JOURNAL OF APPLIED PHYSICS, 114 (11).

Kothai, V and Narayan, Bastola and Brajesh, Kumar and Kaushik, SD and Siruguri, V and Ranjan, Rajeev (2014) Ferroelectric phase coexistence by crystallite size reduction in BiFeO3-PbTiO3. In: PHYSICAL REVIEW B, 90 (15).

Kothai, V and Ranjan, Rajeev (2012) Synthesis of BiFeO by carbonate precipitation. In: BULLETIN OF MATERIALS SCIENCE, 35 (2). pp. 157-161.

Kothai, V and Senyshyn, A and Ranjan, R (2014) Equilibrium phases in the multiferroic BiFeO3-PbTiO3 system - a revisit. In: 7th Joint European Magnetic Symposia (JEMS), AUG 24-30, 2013, Rhodes, GREECE.

Kothai, V and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Competing structural phase transition scenarios in the giant tetragonality ferroelectric BiFeO3-PbTiO3: Isostructural vs multiphase transition. In: JOURNAL OF APPLIED PHYSICS, 113 (8).

Kothale, D and Verma, U and Dewangan, N and Jana, P and Jain, A and Jain, D (2020) Alginate as promising natural polymer for pharmaceutical, food, and biomedical applications. In: Current Drug Delivery, 17 (9). pp. 755-775.

Kotharu, Venkateswarlu and Nagumothu, Rameshbabu and Arumugam, Chandra Bose and Veerappan, Muthupandi and Sankaran, Subramanian and Davoodbasha, MubarakAli and Nooruddin, Thajuddin (2012) Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti. In: Ceramics International, 38 (1). pp. 731-740.

Kottada, RS and Chokshi, AH (2000) Is there diffusion creep in alumina? In: Creep and Fracture of Engineering Materials and Structures - CFEMS-8, 1-5 Nov. 1999, Tsukuba, Japan, pp. 779-786.

Kottada, Ravi S and Chokshi, Atul H (2003) Hot working of an as-Cast Mg-2%Al alloy. In: 4th International Conference on Processing and Manufacturing of Advanced Materials, JUL 07-11, 2003, Univ Carlos III Madrid, Madrid, Spain, pp. 4417-4422.

Kottada, RS and Chokshi, AH (2007) Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7 pct Al alloy. In: Metallurgical and Materials Transactions A, 38A (8). pp. 1743-1749.

Kottada, RS and Chokshi, AH (2000) The High Temperature Tensile and Compressive Deformation Characteristics of Magnesia Doped Alumina. In: Acta Materialia, 48 (15). pp. 3905-3915.

Kottada, RS and Chokshi, AH (2003) Temperature deformation behaviour of a Mg-0.8Al alloy. In: Materials Science Forum, 447-4 . pp. 227-232.

Kottada, Ravi S and Chokshi, Atul H (2005) Low temperature compressive creep in electrodeposited nanocrystalline nickel. In: Scripta Materialia, 53 (8). pp. 887-892.

Kottokkaran, Ranjith and A, Vishnumurthy and Kesavan, Arul Varman and NV, Vinila and Ramamurthy, Praveen C (2017) Thienothiophene-benzoxadiazole based conjugated copolymer for organic photovoltaic application. In: Materials Today Communications, 11 . pp. 132-138. ISSN 23524928

Kottokkaran, Ranjith and Rao, Arun D and Ramamurthy, Praveen C (2012) A promising ketone containing alternating copolymer for organic photovoltaics. In: MRS Fall meeting, 2012, Boston USA.

Kotturappa, CG and Gopikrishna, MM and Rao, AD and Ramamurthy, PC (2017) Design and synthesis of thieno3,4-cpyrrole-4,6-dione based conjugated copolymers for organic solar cells. In: Polymer International, 66 (8). pp. 1206-1213.

Koundinya, NTBN and Kumar, Nandha E and Chawake, Niraj and Korla, Rajesh and Kottada, Ravi Sankar (2018) A simple and versatile machine for creep testing at low loads (6-300 N) and on miniaturized specimens: Application to a Mg-base alloy. In: REVIEW OF SCIENTIFIC INSTRUMENTS, 89 (10).

Kour, R and Singh, S and Sharma, HB and Naik, TSSK and Shehata, N and N, P and Ali, W and Kapoor, D and Dhanjal, DS and Singh, J and Khan, AH and Khan, NA and Yousefi, M and Ramamurthy, PC (2023) Persistence and remote sensing of agri-food wastes in the environment: Current state and perspectives. In: Chemosphere, 317 .

Krishna, B and Chaturvedi, A and Mishra, N and Das, K (2018) Nanomechanical characterization of SU8/ZnO nanocomposite films for applications in energy-harvesting microsystems. In: JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 28 (11).

Krishna, Gamidi Rama and Devarapalli, Ramesh and Prusty, Rajesh and Liu, Tiandong and Fraser, Cassandra L and Ramamurty, Upadrasta and Reddy, Chilla Malla (2015) Structure-mechanical property correlations in mechanochromic luminescent crystals of boron difluoride dibenzoylmethane derivatives. In: IUCrJ, 2 (6). pp. 611-619.

Krishna, Gamidi Rama and Kiran, Mangalampalli SRN and Fraser, Cassandra L and Ramamurty, Upadrasta and Reddy, Chilla Malla (2013) The Relationship of Solid-State Plasticity to Mechanochromic Luminescence in Difluoroboron Avobenzone Polymorphs. In: ADVANCED FUNCTIONAL MATERIALS, 23 (11). pp. 1422-1430.

Krishna, L and Nilawar, S and Ponnalagu, M and Subramani, M and Jayadev, C and Shetty, R and Chatterjee, K and Das, D (2020) Fiber Diameter Differentially Regulates Function of Retinal Pigment and Corneal Epithelial Cells on Nanofibrous Tissue Scaffolds. In: ACS Applied Bio Materials, 3 (2). pp. 823-837.

Krishna, Lekshmi and Dhamodaran, Kamesh and Jayadev, Chaitra and Chatterjee, Kaushik and Shetty, Rohit and Khora, S S and Das, Debashish (2016) Nanostructured scaffold as a determinant of stem cell fate. In: STEM CELL RESEARCH & THERAPY, 7 .

Krishna, Lekshmi and Dhamodaran, Kamesh and Subramani, Murali and Ponnulagu, Murugeswari and Jeyabalan, Nallathambi and Meka, Sai Rama Krishna and Jayadev, Chaitra and Shetty, Rohit and Chatterjee, Kaushik and Khora, Samanta Sekhar and Das, Debashish (2019) Protective Role of Decellularized Human Amniotic Membrane from Oxidative Stress-Induced Damage on Retinal Pigment Epithelial Cells. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 5 (1, SI). pp. 357-372.

Krishna, M. Bala Murali and Man, Michael KL and Vinod, Soumya and Chin, Catherine and Harada, Takaaki and Taha-Tijerina, Jaime and Tiwary, Chandra Sekhar and Nguyen, Patrick and Chang, Patricia and Narayanan, Tharangattu N and Rubio, Angel and Ajayan, Pulickel M and Talapatra, Saikat and Dani, Keshav M (2015) Emergent photophenomena in three dimensional van der Waals heterostructures. In: Conference on Lasers and Electro-Optics (CLEO), MAY 10-15, 2015, San Jose, CA.

Krishna, M. Bala Murali and Man, Michael KL and Vinod, Soumya and Chin, Catherine and Harada, Takaaki and Taha-Tijerina, Jaime and Tiwary, Chandra Sekhar and Nguyen, Patrick and Chang, Patricia and Narayanan, Tharangattu N and Rubio, Angel and Ajayan, Pulickel M and Talapatra, Saikat and Dani, Keshav M (2015) Engineering Photophenomena in Large, 3D Structures Composed of Self-Assembled van der Waals Heterostructure Flakes. In: ADVANCED OPTICAL MATERIALS, 3 (11). pp. 1551-1556.

Krishna, SV and Gupta, SK and Holla, N and Chatterjee, K (2022) Resection of Osteoid Osteoma Using Three-Dimensional (3D) Printing. In: Indian Journal of Orthopaedics .

Krishnakumar, VP and Das Mahapatra, A and Panwar, V and Mondal, A and Kumar, C and Kumar, P and Misra, A (2024) Semiconductor Nanoparticle Anchored Single-Walled Carbon Nanotubes for a Bolometer. In: Langmuir .

Krishnamurthy, S and Chokshi, AH (1997) High temperature deformation and densification in alumina-yttria composites. In: 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), JAN 29-31, 1997, Indian Institute of Science, Bangalore, India, pp. 369-374.

Krishnan, R and Amirthapandian, S and Mangamma, G and Ramaseshan, R and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2009) Implantation Induced Hardening of Nanocrystalline Titanium Thin Films. In: International Conference on Nanoscience and Technology, FEB 27-29, 2008, Chennai.

Krishnan, R and David, C and Ajikumar, PK and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2011) Reactive pulsed laser deposition and characterization of niobium nitride thin films. In: Surface and Coatings Technology, 206 (6). pp. 1196-1202.

Krishnan, R and Mathews, Tom and Balamurugan, AK and Dash, S and Tyagi, AK and Raj, Baldev and Jayaram, Vikram (2010) Reactive Pulsed Laser Deposition of titanium nitride thin film: Optimization of process parameters using Secondary Ion Mass Spectrometry. In: Applied Surface Science, 256 (10). pp. 3077-3080.

Krishnan, RS (1980) Porto,Sergio Memorial Symposium on Lasers and Applications. In: Journal of Scientific and Industrial Research, 39 (11). pp. 608-609.

Krishnan, Vinoadh Kumar and Sinnaeruvadi, Kumaran and Verma, Shailendra Kumar and Dash, Biswaranjan and Agrawal, Priyanka and Subramanian, Karthikeyan (2017) Yttria catalyzed microstructural modifications in oxide dispersion strengthened V-4Cr-4Ti alloys synthesized by field assisted sintering technique. In: PHILOSOPHICAL MAGAZINE, 97 (22, A). pp. 1847-1865.

Krishnan, Vinoadh Kumar and Sinnaeruvadi, Kumaran and Verma, Shailendra Kumar and Subramanian, Karthikeyan (2018) Microstructural characterization of field assisted sintered bulk nanostructured V-4Cr-4Ti alloys. In: PARTICULATE SCIENCE AND TECHNOLOGY, 36 (7). pp. 891-898.

Krishnaswamy, JA and Ramamurthy, PC and Hegde, G and Mahapatra, DR Krishnaswamy, JA and Ramamurthy, PC and Hegde, G and Mahapatra, DR, eds (2022) Hierarchical Structures and Multiscale Optical Design: Unconventional Modes of Confined Optical Transport for Better Photodetectors. Springer, pp. 219-248.

Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.

Kulkarni, A and Srinivasan, D and Ravanappa, P and Jayaram, V and Kumar, P (2023) Creep behavior of additively manufactured high strength A205 aluminum alloy. In: Additive Manufacturing Letters, 6 .

Kulkarni, Ankur H and Chatterjee, Aritra and Kondaiah, Aritra and Kondaiah, Namrata (2018) TGF-beta induces changes in breast cancer cell deformability. In: PHYSICAL BIOLOGY, 15 (6).

Kulkarni, SM and Anuradha, D and Murthy, CRL and Kishore, * (2002) Analysis of filler-fibre interaction in fly ash filled short fibre-epoxy composites using ultrasonic NDE. In: Bulletin of Materials Science, 25 (2). pp. 137-140.

Kulkarni, SM and Kishore, * (2002) Compressive strength of epoxy with bimodal filling of flyash. In: Journal of Reinforced Plastics and Composites, 21 (9). pp. 857-865.

Kulkarni, SM and Kishore, * (2003) Effect of Filler–Fiber Interactions on Compressive Strength of Fly Ash and Short-Fiber Epoxy Composites. In: Journal of Applied Polymer Science, 87 (5). pp. 836-841.

Kulkarni, SM and Kishore, * (2003) Effects of Filler Content and Hygrothermal Ageing on Compressive Properties of Fly Ash-Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 22 (11). pp. 973-982.

Kulkarni, SM and Kishore, * (2002) Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites. In: Journal of Materials Science (full set), 37 (20). pp. 4321-4326.

Kulkarni, SM and Kishore, * (2002) Studies on Fly Ash–Filled Epoxy-Cast Slabs Under Compression. In: Journal of Applied Polymer Science, 84 (13). pp. 2404-2410.

Kulkarni, SM and Mahajan, SS and Ravikumar, NL and Kishore, * (2002) Water ingression and the role of interface on the compressive properties of epoxy filled with treated fly ash. In: Composite Interfaces, 9 (5). 459-466 .

Kulkarni, UD and Banerjee, S and Ranganathan, S (1991) From periodicity to quasiperiodicity Part I: Octagonal quasicrystals and the 45° twins of the β-Mn structure. In: Scripta Metallurgica et Materialia, 25 (3). pp. 529-532.

Kumar, AK and Laurila, T and Vuorinen, V and Paul, A (2010) Study on the Growth of Nb3Sn Superconductor in Cu(Sn)/Nb Diffusion Couple. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Kumar, A and Gupta, A and Khatirkar, RK and Bibhanshu, N and Suwas, S (2018) Strain rate sensitivity behaviour of a chrome-nickel austentic-ferritic stainless steel and its constitutive modelling. In: ISIJ International, 58 (10). pp. 1840-1849.

Kumar, A and Gupta, A and Khatirkar, RK and Suwas, S (2018) Texture development during cross rolling of a dual-phase Fe–Cr–Ni alloy: experiments and simulations. In: Philosophical Magazine Letters, 98 (1). pp. 17-26.

Kumar, A and Kalyani, AK and Ranjan, R and Raju, KCJ and Ryu, J and Park, N and James, AR (2020) Evidence of monoclinic phase and its variation with temperature at morphotropic phase boundary of PLZT ceramics. In: Journal of Alloys and Compounds, 816 .

Kumar, A and Palani, IA and Yadav, M (2024) Comprehensive study of microstructure, phase transformations, and mechanical properties of nitinol alloys made of shape memory and superelastic wires and a novel approach to manufacture Belleville spring using wire arc additive manufacturing. In: Materials Today Communications, 38 .

Kumar, A and Pandey, PM (2022) Investigations into Mechanical and Corrosion Properties of Mg-Based Biomaterial Sintered Using a Customized Die Setup Coupled with a Tube Furnace. In: Journal of Materials Engineering and Performance .

Kumar, A and Saha, S and Prakash, H and Mahale, B and Singh, RP and Adukkadan, A and Ranjan, R and Kumar, N (2023) Role of sintering conditions in tuning the defect chemistry and influencing the electromechanical properties of a Pb-based piezoceramic. In: Journal of Materials Science: Materials in Electronics, 34 (8).

Kumar, AK and Laurila, T and Vuorinen, V and Paul, A (2009) Determination of diffusion parameters and activation energy of diffusion in V3Si phase with A15 crystal structure. In: Scripta Materialia, 60 (6). pp. 377-380.

Kumar, AK and Paul, A (2009) Interdiffusion and Growth of the Superconductor Nb3Sn in Nb/Cu(Sn) Diffusion Couples. In: Journal of Electronic Materials, 38 (5). pp. 700-705.

Kumar, AK and Paul, A (2009) Interdiffusion and activation energy in Ti3Au phase with A15 crystal structure. In: Intermetallics, 17 (11). pp. 962-964.

Kumar, AK and Paul, A (2010) Interdiffusion studies in bulk Au-Ti system. In: Journal of Materials Science: Materials in Electronics, 21 (11). pp. 1202-1206.

Kumar, Ajay P and Madhu, H C and Pariyar, Abhishek and Perugu, Chandra S and Kailas, Satish V and Garg, Uma and Rohatgi, Pradeep (2020) Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 769 .

Kumar, Ajay P and Yadav, Devinder and Perugu, Chandra S and Kailas, Satish V (2017) Influence of particulate reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. In: MATERIALS & DESIGN, 113 . pp. 99-108.

Kumar, Amit and Khatirkar, Rajesh Kisni and Chalapathi, Darshan and Bibhanshu, Nitish and Suwas, Satyam (2017) Texture development during cold rolling of Fe-Cr-Ni alloy-experiments and simulations. In: PHILOSOPHICAL MAGAZINE, 97 (23, A). pp. 1939-1962.

Kumar, Amit and Khatirkar, Rajesh Kisni and Chalapathi, Darshan and Kumar, Gulshan and Suwas, Satyam (2017) Microstructure and Texture Development during Cold Rolling in UNS S32205 and UNS S32760 Duplex Stainless Steels. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (5). pp. 2349-2362.

Kumar, Amit and Khatirkar, Rajesh Kisni and Gupta, Aman and Shekhawat, Satish K and Suwas, Satyam (2018) Deciphering the Possible Role of Strain Path on the Evolution of Microstructure, Texture, and Magnetic Properties in a Fe-Cr-Ni Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3402-3418.

Kumar, Amit and Kumar, Avinash and Saha, Sujoy and Basumatary, Himalay and Ranjan, Rajeev (2019) Ferromagnetism in the multiferroic alloy systems BiFeO3-BaTiO3 and BiFeO3-SrTiO3: Intrinsic or extrinsic? In: APPLIED PHYSICS LETTERS, 114 (2).

Kumar, Amit and Narayan, Bastola and Pachat, Rohit and Ranjan, Rajeev (2018) Magnetic enhancement of ferroelectric polarization in a self-grown ferroelectric-ferromagnetic composite. In: PHYSICAL REVIEW B, 97 (6).

Kumar, Amit and Yadav, KL and Kumar, Sonu and Kumar, Naveen and Mishra, Anupam and Shankar, Uma and Mehrotra, Tarang and Sharma, Gyaneshwar and Kumar, Rajendra and Das Adhikary, Gobinda (2019) Magnetic, ferroelectric, and magnetodielectric properties of BiFeO3 ceramic co-doped with Eu and Gd. In: JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 124 . pp. 19-23.

Kumar, Anil KN and Ray, Basu S and Nagaraja, Valakunja and Raichur, Ashok M (2009) Encapsulation and release of rifampicin using poly(vinyl pyrrolidone)-poly (methacrylic acid) polyelectrolyte capsules. In: Materials Science and Engineering: C, 29 (8). pp. 2508-2513.

Kumar, Anil R and Suresh, MS and Nagaraju, J (2006) Effect of Solar Array Capacitance on the Performance of Switching Shunt Voltage Regulator. In: IEEE Transactions on Power Electronics, 21 (2). pp. 543-548.

Kumar, B and Priyadarshi, R and Sauraj, . and Deeba, F and Kulshreshtha, A and Gaikwad, KK and Kim, J and Kumar, A and Negi, YS (2020) Nanoporous sodium carboxymethyl cellulose-g-poly (Sodium acrylate)/fecl3 hydrogel beads: Synthesis and characterization. In: Gels, 6 (4). pp. 1-11.

Kumar, C and Kumar, P (2024) Analyzing dynamic strain aging and yield strength anomaly in IN740H, a nickel-based superalloy comprising low volume fraction of γ�. In: Materialia, 33 .

Kumar, C and Pavan, AHV and Makineni, SK and Kumar, P (2024) Role of threshold stress in creep of IN740H, a γ�-lean Ni-based superalloy. In: Materials Science and Engineering: A, 903 .

Kumar, D and Jhavar, S and Arya, A and Prashanth, KG and Suwas, S (2021) Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L. In: International Journal of Fracture .

Kumar, D and Muse, CA and Femi, OE and Ravishankar, N and Chattopadhyay, K (2023) The beneficial effect of Fe addition in PbTe-Ni diffusion bonded thermoelectric contact interfaces – A comprehensive phase evolution study. In: Acta Materialia, 261 .

Kumar, D and Shankar, G and Prashanth, KG and Suwas, S (2024) Control of texture and microstructure in additive manufacturing of stainless steel 316 L. In: Journal of Alloys and Compounds, 976 (976).

Kumar, D and Shankar, G and Prashanth, KG and Suwas, S (2021) Texture dependent strain hardening in additively manufactured stainless steel 316L. In: Materials Science and Engineering A, 820 .

Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2024) Examination of NCSL (near-coincidence site lattice) structures formed during β2 (Ni3-xTe2) precipitation in diffusion-bonded PbTe-Ni interfaces � A TEM study. In: Acta Materialia, 263 .

Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2022) Phase decomposition of Ni5Pb2Te3 in diffusion bonded PbTe-Ni interfaces – A TEM and thermodynamic study. In: Acta Materialia, 241 .

Kumar, D S Prem and Chetty, R and Femi, O E and Chattopadhyay, K and Malar, P and Mallik, R C (2017) Thermoelectric Properties of Bi Doped Tetrahedrite. In: 35th International Conference on Thermoelectrics (ICT), 2016, Wuhan, PEOPLES R CHINA, pp. 2616-2622.

Kumar, Deepak and Kumari, Jyoti and Pakrashi, Sunandan and Dalai, Swayamprava and Raichur, Ashok M and Sastry, TP and Mandal, AB and Chandrasekaran, N and Mukherjee, Amitava (2014) Qualitative toxicity assessment of silver nanoparticles on the fresh water bacterial isolates and consortium at low level of exposure concentration. In: ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY, 108 . pp. 152-160.

Kumar, Deepak and Roy, Rajdeep and Parashar, Abhinav and Raichur, Ashok M and Chandrasekaran, Natarajan and Mukherjee, Anita and Mukherjee, Amitava (2017) Toxicity assessment of zero valent iron nanoparticles on Artemia salina. In: ENVIRONMENTAL TOXICOLOGY, 32 (5). pp. 1617-1627.

Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.

Kumar, EN and Athira, KS and Chatterjee, S and Srinivasan, D (2022) EFFECT OF HEAT TREATMENT ON STRUCTURE AND PROPERTIES OF LASER POWDER BED FUSION INCONEL 939. In: UNSPECIFIED.

Kumar, GM and Jyotheender, KS and Srivastava, C (2022) Effect of grain boundary constitution on corrosion behaviour in cobalt-carbon nanotube composite coatings. In: Materialia, 24 .

Kumar, GM and Phukon, M and Srivastava, C (2023) Deposition current density-induced grain boundary engineering of electrodeposited cobalt coatings for enhanced electrochemical stability. In: Philosophical Magazine .

Kumar, GM and Singh, AP and Godha, A and Yadav, A and Srivastava, C (2024) Enhanced resistance to corrosion and hydrogen permeation due to tungsten partitioning induced phase and strain evolution in electrodeposited cobalt-tungsten coatings. In: Materialia, 33 .

Kumar, Girish and Tison, Christopher K and Chatterjee, Kaushik and Pine, Scott P and McDaniel, Jennifer H and Salit, Marc and Young, Marian F and Simon, Carl G (2011) The determination of stem cell fate by 3D scaffold structures through the control of cell shape. In: Biomaterials, 32 (35). pp. 9188-9196.

Kumar, H and Dash, A and Paul, A and Bhattacharyya, S (2022) A physics-informed neural network-based numerical inverse method for optimization of diffusion coefficients in NiCoFeCr multi principal element alloy. In: Scripta Materialia, 214 .

Kumar, H and Perugu, CS and Makineni, SK (2024) Alloy Development, Microstructural, and Mechanical Behaviour of Mg�Ce Based Alloys. In: Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 2024, 3 March 2024 through 7 March 2024, Orlando, pp. 55-56.

Kumar, J and Sai Gautam, G (2023) Study of pnictides for photovoltaic applications. In: Physical chemistry chemical physics : PCCP, 25 (13). pp. 9626-9635.

Kumar, KG and Pavithran, C and Rohatgi, PK (1981) Recovery of Tartrate from Electroless Copper Baths. In: Plating and Surface Finishing, 68 (7). pp. 70-71.

Kumar, Kaushlendra and Sankarasubramanian, R and Waghmare, Umesh V (2015) The effect of gamma-gamma ` interface on the tensile and shear strengths of nickel-based superalloys: A first-principles study. In: COMPUTATIONAL MATERIALS SCIENCE, 97 . pp. 26-31.

Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Modelling of the Cooling Process on the Runout Table of a Hot Strip Mill-A Parallel Approach. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2563 -2571.

Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Real Time Simulator for the Runout Table of Hot Strip Mills. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2547-2554.

Kumar, L and Sahoo, S.K. and Alam, S.N. (2020) Influence of nanostructured Cu on the mechanical properties of Cu–MWCNTs composites. In: International Journal of Materials Research, 111 (6). pp. 469-478.

Kumar, Lailesh and Alam, Syed N and Sahoo, Santosh K (2019) Effect of nanostructured Al on microstructure, microhardness and sliding wear behavior of Al-xGnP composites by powder metallurgy (PM) route. In: INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 110 (10). pp. 954-962.

Kumar, Lailesh and Yazar, KU and Pramanik, Sudipta (2019) Effect of fusion and friction stir welding techniques on the microstructure, crystallographic texture and mechanical properties of mild steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 754 . pp. 400-410.

Kumar, Lawrence and Kumar, Pawan and Kuncser, Victor and Greculeasa, Simona and Sahoo, Balaram and Kar, Manoranjan (2018) Strain induced magnetism and superexchange interaction in Cr substituted nanocrystalline cobalt ferrite. In: MATERIALS CHEMISTRY AND PHYSICS, 211 . pp. 54-64.

Kumar, M and Saravanan, A and Joshi, SA and Chen, S-C and Huang, B-R and Sun, H (2024) High-performance self-powered UV photodetectors using SnO2 thin film by reactive magnetron sputtering. In: Sensors and Actuators A: Physical, 373 .

Kumar, MP and Ramamnurthy, PC (2018) Alternative transparent conducting electrode for flexible optoelectronics. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Kumar, Manoj and Kumar, Amit and Kumar, Yogesh and Dhiman, Shobhna and Shankar, Uma and Yadav, KL and Sharma, G (2019) Strongly enhanced electrocaloric effects in doped BaTiO3 with reduced grain size. In: SMART MATERIALS AND STRUCTURES, 28 (1).

Kumar, N and Bastola, N and Jain, P and Kumar, S and Singh, AK and Ranjan, R (2018) Investigation on structural, ferroelectric and magnetic properties of BiFeO3-PbTiO3 multiferroic system. In: Progress In Electromagnetics Research Symposium - Spring, PIERS 2017, 22-25 May 2017, St. Petersburg, Russia, pp. 2603-2605.

Kumar, N and Bastola, N and Singh, AK and Kumar, S (2020) Effect of Mn addition on magnetoelectric coupling behavior of BiFeO3-Pb/BaTiO3 multiferroics. In: Materials Research Express, 7 (1).

Kumar, N and Mahale, B and Muzata, TS and Ranjan, R (2021) Energy harvesting with flexible piezocomposite fabricated from a biodegradable polymer. In: International Journal of Energy Research .

Kumar, N and Narayan, B and Kumar, M and Singh, AK and Dhiman, S and Kumar, S (2019) Effect of Nd3+ substitution on structural, ferroelectric, magnetic and electrical properties of BiFeO3–PbTiO3 binary system. In: SN Applied Sciences, 1 (8).

Kumar, N and Narayan, B and Singh, A and Kumar, S (2020) Enhanced magneto-capacitance in Sr2+ modified BiFeO3�PbTiO3 solid solutions. In: Materials Chemistry and Physics, 252 .

Kumar, N and Raman, KS and Sastry, DH and Little, EA (1990) Investigation of superplasticity by the impression creep technique. In: Journal of Materials Science, 25 (1). pp. 753-755.

Kumar, NVR and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Kumar, NVR and Pai, BC and Dwarakadasa, ES (2003) Microstructural evolution in liquid metal processed Al-alloy/SiCp composites. In: International Journal of Cast Metals Research, 15 (6). pp. 573-579.

Kumar, Nanda D and Rajeshwari, A and Alex, SA and Sahu, M and Raichur, AM and Chandrasekaran, N and Mukherjee, A (2015) Developing acetylcholinesterase-based inhibition assay by modulated synthesis of silver nanoparticles: applications for sensing of organophosphorus pesticides. In: RSC ADVANCES, 5 (76). pp. 61998-62006.

Kumar, Naveen and Bastola, Narayan and Kumar, Sanjeev and Ranjan, Rajeev (2017) Relaxor dielectric behavior in BaTiO3 substituted BiFeO3-PbTiO3 multiferroic system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 28 (14). pp. 10420-10426.

Kumar, Naveen and Khatua, Dipak Kumar and Mahale, Bhoopesh and Ranjan, Rajeev (2018) Factors influencing the coupling between non-180 degrees domain switching and lattice strain in perovskite piezoceramics. In: PHYSICAL REVIEW B, 97 (13).

Kumar, Naveen and Kumar, Sanjeev and Narayan, Bastola and Bansal, Shonak and Singh, Arun K (2019) Effect of Dy3+ substitution on structural, magnetic and dielectric properties of BiFeO3-PbTiO3 multiferroics. In: 2018 IEEE 13TH NANOTECHNOLOGY MATERIALS AND DEVICES CONFERENCE (NMDC), OCT 14-17, 2018, Portland, USA, pp. 17-20.

Kumar, Naveen and Narayan, Bastola and Kumar, Sanjeev and Verma, K C and Ranjan, Rajeev and Shah, Jyoti and Kotnala, R K (2017) Magnetic controlled voltage in the pseudo-ternary multiferroic BiFeO3-PbTiO3-BaTiO3. In: MATERIALS RESEARCH EXPRESS, 4 (9).

Kumar, Naveen and Narayan, Bastola and Mehrotra, Tarang and Kumar, Amit and Kumar, Manoj and Ranjan, Rajeev and Kumar, Sanjeev and Shah, Jyoti and Kotnala, R K (2019) Influence of Cr3+ doping on multiferroic properties in the morphotropic phase boundary compositions of BiFeO3-PbTiO3 system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 30 (17). pp. 16539-16547.

Kumar, P and Dutta, I (2017) Response to ``Comment on `Electric current induced flow of liquid metals: Mechanisms and substrate-surface effects''' J. Appl. Phys. 121, 136102 (2017)]. In: JOURNAL OF APPLIED PHYSICS, 121 (13).

Kumar, P and Dutta, I and Huang, Z and Conway, P (2021) Materials and Processing of TSV. [Book Chapter]

Kumar, P and Kawasaki, M and Langdon, TG (2017) Resolving the strength-ductility paradox through severe plastic deformation of a cast Al-7 Si alloy. In: 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, 29 - 3 June 2016, Graz, pp. 1043-1048.

Kumar, P and Kedaria, D and Mahapatra, C and Mohandas, M and Chatterjee, K (2021) A designer cell culture insert with a nanofibrous membrane toward engineering an epithelial tissue model validated by cellular nanomechanics. In: Nanoscale Advances, 3 (16). pp. 4714-4725.

Kumar, P and Lee, T-K and Dutta, I and Huang, Z and Conway, P (2021) Microstructure and Mechanical Reliability Issues of TSV. [Book Chapter]

Kumar, P and Mishra, A and Watt, T and Watt, I and Bourell, DL and Sahaym, U (2013) Electromagnetic jigsaw: metal-cutting by combining electromagnetic and mechanical Forces. In: PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 6 . pp. 600-604.

Kumar, P and Talenbanpour, B and Sahaym, U and Wen, CH and Dutta, I (2012) Microstructural Evolution and Some Unusual Effects During Thermo-Mechanical Cycling of Sn-Ag-Cu Alloys. In: 13th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) , MAY 30-JUN 01, 2012 , San Diego, CA , pp. 880-887.

Kumar, PV and Gupta, GS (2002) Study of formation of silicon carbide in the Acheson process. In: Steel Research, 73 (2). pp. 31-38.

Kumar, Pankaj and Gurao, Nilesh P and Haldar, Arunansu and Suwas, Satyam (2012) Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression. In: Metallurgical and Materials Transactions A, 43A (6). pp. 2043-2055.

Kumar, Prajwal and Joseph, Alex and Ramamurthy, Praveen C and Subramanian, Sankaran (2012) Lead ion sensor with electrodes modified by imidazole-functionalized polyaniline. In: MICROCHIMICA ACTA, 177 (3-4). pp. 317-323.

Kumar, Prajwal and Ranjith, K and Gupta, Satyajit and Ramamurthy, Praveen C (2011) Electrochemical copolymerization of thiophene derivatives; a precursor to photovoltaic devices. In: Electrochimica Acta, 56 (24). pp. 8184-8191.

Kumar, Prajwal and Roy, Aashis S and Ramamurthy, Praveen C (2014) The design of polyaniline based sensor for the qualitative estimation of malonaldehyde. In: MEASUREMENT, 47 . pp. 1-4.

Kumar, Prajwal and Saravanan, S and Ranjith, K and Ramamurthy, Praveen C (2014) D-A-D-structured conducting polymer-modified electrodes for detection of lead(II) ions in water. In: JOURNAL OF APPLIED ELECTROCHEMISTRY, 44 (1). pp. 133-139.

Kumar, Prashant and Kiran, MSRN (2010) Nanomechanical Characterization of Indium Nano/Microwires. In: Nanoscale Res Lett, 5 (7). pp. 1085-1092.

Kumar, Prashant and Kiran, MSRN (2010) Nanomechanical properties of silicon surfaces nanostructured by excimer laser. In: Science and Technology of Advanced Materials, 11 (2).

Kumar, Prasoon and Agrawal, Prashant and Chatterjee, Kaushik (2019) Challenges and opportunities in blood flow through porous substrate: A design and interface perspective of dried blood spot. In: JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS, 175 .

Kumar, Praveen and Awasthi, Sandeep (2014) Mechanical and thermal modeling of In-Cu composites for thermal interface materials applications. In: JOURNAL OF COMPOSITE MATERIALS, 48 (11). pp. 1391-1398.

Kumar, Praveen and Dutta, Indranath (2013) Effect of substrate surface on electromigration-induced sliding at hetero-interfaces. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 46 (15).

Kumar, Praveen and Dutta, Indranath and Huang, Zhiheng and Conway, Paul (2017) Microstructural and Reliability Issues of TSV. [Book Chapter]

Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2016) Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures. In: JOURNAL OF MATERIALS SCIENCE, 51 (1). pp. 7-18.

Kumar, Praveen and Koledov, Victor and von Gratowski, Svetlana and Pratap, Rudra and Irzhak, Artemy and Zhikharev, Alexey and Orlov, Andrey and Lega, Peter and Talukder, Santanu and Kumar, Sumit and Shashtri, Vijayendra (2018) Electrical Jointing at Micro- and Nanoscale by Electromigration and Mechanical Nano-Manipulation for Bottom-Up Nano-Assembling. In: IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), AUG 13-17, 2018, Hangzhou, PEOPLES R CHINA, pp. 167-170.

Kumar, Praveen and Pratap, Rudra and Talukder, Santanu and Kumar, Sumit and Shastri, Vijayendra and Maurya, Raman and Swamy, Mruthyunjaya KB (2018) Patterning Cr Film by Passing Electric Current through a Traversing Pointy Stylus: Introduction to Electrolithography and Its Prospects. In: 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), AUG 13-17, 2018, Hangzhou, PEOPLES R CHINA, pp. 181-185.

Kumar, Punit and Prakash, Om and Ramamurty, Upadrasta (2018) Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V. In: ACTA MATERIALIA, 154 . pp. 246-260.

Kumar, Punith MK and Nidhi, Monika and Srivastava, Chandan (2015) Electrochemical exfoliation of graphite to produce graphene using tetrasodium pyrophosphate. In: RSC ADVANCES, 5 (32). pp. 24846-24852.

Kumar, Punith MK and Rekha, MY and Agrawal, Juhi and Agarwal, Tushar Mani and Srivastava, Chandan (2019) Microstructure, morphology and electrochemical properties of ZnFe-Graphene composite coatings. In: JOURNAL OF ALLOYS AND COMPOUNDS, 783 . pp. 820-827.

Kumar, Punith MK and Shanthini, S and Srivastava, Chandan (2015) Electrochemical exfoliation of graphite for producing graphene using saccharin. In: RSC ADVANCES, 5 (66). pp. 53865-53869.

Kumar, Punith MK and Singh, Mahander Pratap and Srivastava, Chandan (2015) Electrochemical behavior of Zn-graphene composite coatings. In: RSC ADVANCES, 5 (32). pp. 25603-25608.

Kumar, Punith MK and Srivastava, Chandan (2013) Morphological and electrochemical characterization of electrodeposited Zn-Ag nanoparticle composite coatings. In: MATERIALS CHARACTERIZATION, 85 . pp. 82-91.

Kumar, Punith MK and Srivastava, Chandan (2016) Synthesis of Graphene from a Used Battery Electrode. In: JOM, 68 (1). pp. 374-383. (In Press)

Kumar, Punith MK and Srivastava, Chandan (2014) Enhancement of Corrosion Resistance of Zinc Coatings Using Green Additives. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23 (10). pp. 3418-3424.

Kumar, RK and Sinha, SK and Lahiri, AK (1997) Modeling of the cooling process on the runout table of a hot strip mill - A parallel approach. In: IEEE Transactions on Industry Applications, 33 (3). pp. 807-814.

Kumar, RV and Keshavamurthy, R and Perugu, CS and Siddaraju, C (2020) Influence of heat treatment on microstructure and mechanical behaviour of hot-rolled Al-Mg-Si alloy. In: Advances in Materials and Processing Technologies .

Kumar, Rajeev and Choudhary, Harish Kumar and Anupama, AV and Menon, Aishwarya V and Pawar, Shital P and Bose, Suryasarathi and Sahoo, Balaram (2019) Nitrogen doping as a fundamental way to enhance the EMI shielding behavior of cobalt particle-embedded carbonaceous nanostructures. In: NEW JOURNAL OF CHEMISTRY, 43 (14). pp. 5568-5580.

Kumar, Ram and Raut, Devaraj and Ramamurty, Upadrasta and Rao, CNR (2016) Remarkable Improvement in the Mechanical Properties and CO2 Uptake of MOFs Brought About by Covalent Linking to Graphene. In: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 55 (27). pp. 7857-7861.

Kumar, Ram and Raut, Devraj and Ahmad, Irshad and Ramamurty, Upadrasta and Maji, Tapas Kumar and Rao, CNR. (2014) Functionality preservation with enhanced mechanical integrity in the nanocomposites of the metal-organic framework, ZIF-8, with BN nanosheets. In: MATERIALS HORIZONS, 1 (5). pp. 513-517.

Kumar, Ramesh D and Elumalai, Rajasegaran and Raichur, Ashok M and Sanjuktha, M and Rajan, JJ and Alavandi, SV and Vijayan, KK and Poornima, M and Santiago, TC (2016) Development of antiviral gene therapy for Monodon baculovirus using dsRNA loaded chitosan-dextran sulfate nanocapsule delivery system in Penaeus monodon post-larvae. In: ANTIVIRAL RESEARCH, 131 . pp. 124-130.

Kumar, Ravi NV and Dwarakadasa, ES (2000) Effect of matrix strength on the mechanical properties of Al–Zn–Mg/SiCP composites. In: Composites Part A: Applied Science and Manufacturing, 31 (10). pp. 1139-1145.

Kumar, Ravi NV and Dwarakadasa, ES (1994) Fracture behaviour of $Al-Zn-Mg/SiC_p$ composites. In: Journal of Materials Science, 29 (6). pp. 1533-1539.

Kumar, S (2024) Modelling coupled electro-mechanical phenomena in elastic dielectrics using local conformal symmetry. In: Applied Mathematical Modelling, 126 . pp. 568-583.

Kumar, S (2024) Modelling ductile damage in metals and alloys through Weyl condition exploiting local gauge symmetries. In: International Journal of Solids and Structures, 296 .

Kumar, S (2024) A space�time gauge theory for dynamic plasticity: Non-linear micro-inertia and its consequences. In: European Journal of Mechanics, A/Solids, 105 .

Kumar, S (2024) A space�time gauge theory for dynamic plasticity: Non-linear micro-inertia and its consequences. In: European Journal of Mechanics, A/Solids, 105 .

Kumar, S and Abraham, E and Kumar, P and Pratap, R (2021) Introducing Water Electrolithography. In: ACS Omega, 6 (39). pp. 25692-25701.

Kumar, S and Abraham, E and Talukder, S and Kumar, P and Pratap, R (2018) Micro Electrolithography System Development. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.

Kumar, S and Agrawal, S and Rokkam, KK and Yadav, S and Dishwar, RK (2024) Recovery of high-grade cobalt oxide from zinc plant residue (ZPR) generated at zinc processing plants. In: Hydrometallurgy, 226 .

Kumar, S and Ingole, S and Dieringa, H and Kainer, KU (2003) Thermal cycling of Mg-MMCs. In: Materials Science Forum, 426-4 . pp. 2119-2124.

Kumar, S and Mukherjee, A and Telpande, S and Mahapatra, AD and Kumar, P and Misra, A (2023) Role of the electrode-edge in optically sensitive three-dimensional carbon foam-MoS2 based high-performance micro-supercapacitors. In: Journal of Materials Chemistry A .

Kumar, S and Pawar, SP and Chatterjee, K and Bose, S (2014) Antimicrobial and conducting polymer substrate derived from hybrid structures of silver nanoparticles and multiwall carbon nanotubes. In: MATERIALS TECHNOLOGY, 29 (B1, SI). B59-B63.

Kumar, S and Shabadi, R and Patel, MM (2003) Influence of precipitation on serrated flow in Al – 5Zn–1Mg alloy. In: Materials Science and Technology, 19 (10). pp. 1344-1348.

Kumar, S and Singh, DN and James, AR and Mahato, DK (2023) Probing of the physical characteristics of antiferroelectric Pb(Zr0.6Ti0.4)O3; PZT (60/40) ceramics. In: Journal of Materials Science: Materials in Electronics, 34 (10).

Kumar, S and Suresh, H and Sethuraman, VA and Kumar, P and Pratap, R (2020) Electric field induced patterning in Cr film under ambient conditions: AÂ chemical reaction based perspective. In: SN Applied Sciences, 2 (12).

Kumar, S and Telpande, S and Manikandan, V and Kumar, P and Misra, A (2020) Novel electrode geometry for high performance CF/Fe2O3based planar solid state micro-electrochemical capacitors. In: Nanoscale, 12 (37). pp. 19438-19449.

Kumar, SS and Jayaram, V and Ojha, PK and Badi, SP and Aruna, ST (2018) Co-Cu-YSZ-GDC as an anode material for internal reforming SOFC? In: Nanomaterials and Energy, 7 (2). pp. 44-51.

Kumar, Sachin and Azam, Dilkash and Raj, Shammy and Kolanthai, Elayaraja and Vasu, KS and Sood, AK and Chatterjee, Kaushik (2016) 3D scaffold alters cellular response to graphene in a polymer composite for orthopedic applications. In: JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 104 (4, SI). pp. 732-749.

Kumar, Sachin and Bose, Suryasarathi and Chatterjee, Kaushik (2014) Amine-functionalized multiwall carbon nanotubes impart osteoinductive and bactericidal properties in poly(epsilon-caprolactone) composites. In: RSC ADVANCES, 4 (37). pp. 19086-19098.

Kumar, Sachin and Raj, Shammy and Jain, Shubham and Chatterjee, Kaushik (2016) Multifunctional biodegradable polymer nanocomposite incorporating graphene-silver hybrid for biomedical applications. In: MATERIALS & DESIGN, 108 . pp. 319-332.

Kumar, Sachin and Raj, Shammy and Kolanthai, Elayaraja and Sood, AK and Sampath, S and Chatterjee, Kaushik (2015) Chemical Functionalization of Graphene To Augment Stem Cell Osteogenesis and Inhibit Biofilm Formation on Polymer Composites for Orthopedic Applications. In: ACS APPLIED MATERIALS & INTERFACES, 7 (5). pp. 3237-3252.

Kumar, Sampath TS and Hegde, MS (1986) Electron Spectroscopic Study of Surface Segregation and Oxidation of Cu-In and Cu-Au Alloys. In: Applied Surface Science, 26 (2). pp. 219-229.

Kumar, Sampath TS and Mallya, RM and Hegde, MS (1988) Surface segregation and oxidation studies on Cu-Ni-Sn and Ag-Cu-Ge ternary alloys. In: Applied Surface Science, 35 (1). pp. 63-75.

Kumar, Sandeep and Jayaram, Vikram and Mani, TV and Warrier, KGK (1997) Degradation of Al2O3-�SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate. In: Journal of Materials Science, 32 (17). pp. 4719-4722.

Kumar, Subodh and Dieringa, Hajo and Kainer, Karl-Ulrich (2005) Effect of particulate content on the thermal cycling behavior of the magnesium alloy based hybrid composites. In: Composites, Part A: Applied Science and Manufacturing, 36 (3). pp. 321-325.

Kumar, Subodh and Ingole, Sudeep and Dieringa, Hajo and Kainer, Karl U (2003) Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 63 (12). pp. 1805-1814.

Kumar, Subodh and Mondal, Ashok Kumar and Dieringa, Hajo and Kainer, Karl-Ulrich (2004) Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCs. In: Composites Science and Technology, 64 (9). pp. 1179-1189.

Kumar, Sudheer P and Ramachandra, S and Ramamurty, U (2003) Effect of displacement-rate on the indentation behavior of an aluminum foam. In: Materials Science and Engineering A, 347 (1-2). pp. 330-337.

Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.

Kumar, Suresh M and Ambresha, A and Ranganath, VR and Kishore, K (2014) On the Utility of Microscopy and C-Scan Techniques in the Study of Defects Arising From Resin Infusion Process and a Study on the Influence of Voids on the Impact Behavior of CFRP Composites. In: PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 51 (5). pp. 353-366.

Kumar, Suresh M and Ambresha, M and Panbarasu, K and Kishore, I and Ranganath, VR (2015) A comparative study of failure features in aerospace grade unidirectional and bidirectional woven CFRP composite laminates under four-point bend fatigue loads. In: MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 46 (6). pp. 644-651.

Kumar, T and Rao, RR and Ramamurthy, PC and Mani, M (2020) Safety of Light Emitting Diode (LED) Based Domestic Lighting in Rural Context. In: INDICON 2018 - 15th IEEE India Council International Conference, 16-18 Dec. 2018, Coimbatore, India,.

Kumar, TS Sampath and Hegde, MS (1985) Surface segregation and oxidation studies of Cu-Sn and Cu-Pd alloys by x-ray photoelectron and auger spectroscopy. In: Applications of Surface Science, 20 (3). pp. 290-306.

Kumar, TS Sampath and Hegde, MS (1985) XPS and XAES studies of surface segregation and oxidation of Cu-Ge alloy. In: Surface Science Letters, 150 (2). L123-L129.

Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.

Kumar, V and Dash, S (2022) Patterns during Evaporative Crystallization of a Saline Droplet. In: Langmuir, 38 (333). pp. 10265-10273.

Kumar, VV and Thomas, JM and Naidu, MS (2001) Influence of Switching Conditions on the VETO Magnitudes in a GIS. In: IEEE Power Engineering Review, 21 (6). p. 72.

Kumar, Vasanth R and Keshavamurthy, R and Perugu, Chandra S and Koppad, Praveennath G and Alipour, Mohammad (2018) Influence of hot rolling on microstructure and mechanical behaviour of A16061-ZrB2 in-situ metal matrix composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 738 . pp. 344-352.

Kumar Das, N and Kumar Naik, P and Reddy, DN and Mallik, BS and Bose, S and Banerjee, T (2022) Experimental and molecular dynamic insights on the thermophysical properties for MWCNT-Phosphonium based eutectic thermal media. In: Journal of Molecular Liquids, 354 .

Kumar Naik, TSS and Kesavan, AV and Swamy, BEK and Singh, S and Anil, AG and Madhavi, V and Ramamurthy, PC (2022) Low cost, trouble-free disposable pencil graphite electrode sensor for the simultaneous detection of hydroquinone and catechol. In: Materials Chemistry and Physics, 278 .

Kumar Poobalan, R and Pratap Singh, M and Basavaraju, U and Barshilia, HC and Basu, B (2022) Optical properties and thermal degradation of NbB2/Nb(BNO)/Al2O3 spectrally selective tandem absorber. In: Solar Energy, 247 . pp. 510-519.

Kumar Samantaray, P and Bose, S (2018) Cationic biocide anchored graphene oxide-based membranes for water purification. In: Proceedings of the Indian National Science Academy, 84 (3). pp. 669-679.

Kumar Singh, S and Raj, R and Salvi, AS and Parasuram, S and Kumar, S and Bose, S (2024) Microwave-assisted ZnO-decorated carbon urchin resembling �shish-kebab� morphology with self-healing and enhanced electromagnetic shielding properties. In: Nanoscale .

Kumari, A and Natarajan, KA (2002) Cathodic reductive dissolution and surface adsorption behavior of ocean manganese nodules. In: Hydrometallurgy, 64 (3). pp. 247-255.

Kumari, A and Natarajan, KA (2002) Electrochemical aspects of leaching of ocean nodules in the presence and absence of microorganisms. In: International Journal of Mineral Processing, 66 (1-4). pp. 29-47.

Kumari, A and Natarajan, KA (2002) Electrochemical processing of ocean manganese nodules with microbial enhancement to recover valuable metals. In: Minerals and Metallurgical Processing, 19 (3). pp. 137-147.

Kumari, A and Natarajan, KA (2001) Electroleaching of polymetallic ocean nodules to recover copper, nickel and cobalt. In: Minerals Engineering, 14 (18). pp. 877-886.

Kumari, Abha and Natarajan, KA (2002) Development of a clean bioelectrochemical process for leaching of ocean manganese nodules. In: Minerals Engineering, 15 (1-2). pp. 103-106.

Kumari, Abha and Natarajan, KA (2001) Electrobioleaching of polymetallic ocean nodules. In: Hydrometallurgy, 62 (2). pp. 125-134.

Kumari, Jyoti and Kumar, Deepak and Mathur, Ankita and Naseer, Arif and Kumar, Ravi Ranjan and Chandrasekaran, Prathna Thanjavur and Chaudhuri, Gouri and Pulimi, Mrudula and Raichur, Ashok M and Babu, S and Chandrasekaran, Natarajan and Nagarajan, R and Mukherjee, Amitava (2014) Cytotoxicity of TiO2 nanoparticles towards freshwater sediment microorganisms at low exposure concentrations. In: ENVIRONMENTAL RESEARCH, 135 . pp. 333-345.

Kumari, Kiran and Brajesh, Kumar and Kumar, Amit and Sharma, Seema and Shamim, Md Kashif (2017) Study on Multiferroic Properties of Lead Titanate Based Ceramic. In: International Conference on Multifunctional Materials for Device Applications (ICMDA), OCT 26-28, 2016, Patna, INDIA, pp. 5625-5630.

Kumari, S and Chatterjee, K (2021) Biomaterials-based formulations and surfaces to combat viral infectious diseases. In: APL Bioengineering, 5 (1).

Kumari, S and Mondal, P and Tyeb, S and Chatterjee, K (2024) Visible light-based 3D bioprinted composite scaffolds of κ-carrageenan for bone tissue engineering applications. In: Journal of Materials Chemistry B .

Kumari, Sushma and Mondal, Pritiranjan and Chatterjee, Kaushik (2022) Digital light processing-based 3D bioprinting of κ-carrageenan hydrogels for engineering cell-loaded tissue scaffolds. In: Carbohydrate Polymers, 290 . ISSN 01448617

Kumawat, MK and Sarkar, R and Jayaram, V and Alam, MZ (2021) Fatigue behavior of a freestanding Pt-aluminide (PtAl) bond coat at ambient temperature. In: Surface and Coatings Technology, 427 .

Kumbhakar, P and Ambekar, RS and Parui, A and Roy, AK and Roy, D and Singh, Singh and Tiwary, CS (2023) Energy Harvesting Using ZnO Nanosheet-Decorated 3D-Printed Fabrics. In: ACS Applied Materials and Interfaces .

Kumbhakar, P and Biswas, S and Pandey, P and Tiwary, CS and Kumbhakar, P (2019) Tailoring of structural and photoluminescence emissions by Mn and Cu co-doping in 2D nanostructures of ZnS for the visualization of latent fingerprints and generation of white light. In: Nanoscale, 11 (4). pp. 2017-2026.

Kumbhakar, Partha and Biswas, Subrata and Tiwary, S Chandra and Kumbhakar, Pathik (2017) Near white light emission and enhanced photocatalytic activity by tweaking surface defects of coaxial ZnO@ZnS core-shell nanorods. In: JOURNAL OF APPLIED PHYSICS, 121 (14).

Kumbhakar, Pathik and Kole, Arup Kanti and Tiwary, Chandra Sekhar and Biswas, Subrata and Vinod, Soumya and Taha-Tijerina, Jaime and Chatterjee, Udit and Ajayan, Pulickel M (2015) Nonlinear Optical Properties and Temperature-Dependent UV-Vis Absorption and Photoluminescence Emission in 2D Hexagonal Boron Nitride Nanosheets. In: ADVANCED OPTICAL MATERIALS, 3 (6). pp. 828-835.

Kundur, A C and Singh, M P and Sethuraman, V A (2017) Sodium Doped Strontium Silicates as Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells. In: 15th International Symposium on Solid Oxide Fuel Cells (SOFC), JUL 23-28, 2017, Hollywood, FL, pp. 467-475.

Kundur, A C and Singh, M P and Sethuraman, V A (2017) Sodium Doped Strontium Silicates as Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells. In: 15th International Symposium on Solid Oxide Fuel Cells (SOFC), JUL 23-28, 2017, Hollywood, FL, pp. 467-475.

Kurapati, Rajendra and Raichur, Ashok M (2013) Composite cyclodextrin-calcium carbonate porous microparticles and modified multilayer capsules: novel carriers for encapsulation of hydrophobic drugs. In: Journal of Materials Chemistry B , 1 (25). pp. 3175-3184.

Kurapati, Rajendra and Raichur, Ashok M (2012) Graphene oxide based multilayer capsules with unique permeability properties: facile encapsulation of multiple drugs. In: CHEMICAL COMMUNICATIONS, 48 (48). pp. 6013-6015.

Kurapati, Rajendra and Raichur, Ashok M (2013) Near-infrared light-responsive graphene oxide composite multilayer capsules: a novel route for remote controlled drug delivery. In: CHEMICAL COMMUNICATIONS, 49 (7). pp. 734-736.

Kurapati, Rajendra and Reddy, Venkateswara U and Raichur, Ashok M and Suryaprakash, N (2016) Facile synthesis of Graphene Oxide/Double-stranded DNA composite liquid crystals and Hydrogels. In: JOURNAL OF CHEMICAL SCIENCES, 128 (3). pp. 325-330.

Kurapati, Rajendra and Vaidyanathan, Mahalakshmi and Raichur, Ashok M (2016) Synergistic photothermal antimicrobial therapy using graphene oxide/polymer composite layer-by-layer thin films. In: RSC ADVANCES, 6 (46). pp. 39852-39860.

Kurny, ASW and Rao, Mohan M and Mallya, RM (1986) Design and construction of a laboratory model ion-nitriding unit. In: Indian Journal of Technology, 24 (10). pp. 671-675.

Kurny, ASW and Mallya, RM and Rao, M Mohan (1986) A study on the nature of the compound layer formed during the ion nitriding of En40B steel. In: Materials Science and Engineering, 78 (1). pp. 95-100.

Kurny, ASW and Mallya, RM and Rao, Mohan M (1988) On the Formation of Austenite during Ion Nitriding of Armco Iron. In: Journal of the Less Common Metals, 144 (2). pp. 201-207.

Kurungottu, P and Thomas, MB and Lalitha, MM and Ganesh, P and Gnanadhas, DP and Chakravortty, D and Raichur, AM and Kurapati, R (2024) Biodegradable Nanocomposite of ZnS(Mn) Quantum Dots Immobilized Graphene Oxide for Bioimaging Applications. In: Nanotheranostics, 8 (2). pp. 150-162.

Kutty, TRG and Ganguly, C and Jayadevan, NC and Sastry, DH (1996) Role of zirconium addition on stability of UAl3 phase in Al-U system. In: Journal of Nuclear Materials, 230 (3). pp. 295-301.

Kutty, TRG and Ganguly, C and Sastry, DH (1996) Development of creep curves from hot indentation hardness data. In: Scripta Materialia, 34 (12). pp. 1833-1838.

Kutty, TRG and Ganguly, C and Sastry, DH (1995) Thermal expansion of A1-U and A1-U-Zr alloys. In: Journal of Nuclear Materials, 226 (1-2). pp. 197-205.

Kutty, TRN and Philip, Sam (1995) Low voltage varistors based on $SrTiO_3$ ceramics. In: Materials Science and Engineering B, 33 (2-3). pp. 58-66.

Kutty, TRN and Vivekanandan, R and Murugaraj, P (1988) Precipitation of rutile and anatase (Tio12) fine powders and their conversion to MTiO3 (M = Ba, Sr, Ca) by the hydrothermal method. In: Materials Chemistry and Physics, 19 (6). pp. 533-546.

kumar, D and Legese, SS and Mukherjee, S and Femi, OE and Narayanan, R and Chattopadhyay, K (2022) Zr-based quaternary half-Heusler alloy systems ZrNimX0.5Sb1.5−m (X[dbnd]Fe/In): Studies on phase evolution, crystal structures and electronic properties. In: Journal of Alloys and Compounds, 908 .

L

Ladhane, S and Shah, S and Shinde, P and Punde, A and Waghmare, A and Hase, Y and Bade, BR and Doiphode, V and Rahane, SN and Kale, D and Rondiya, SR and Prasad, M and Patole, SP and Jadkar, SR (2024) Enhanced Photoelectrochemical Activity Realized from WS2 Thin Films Prepared by RF-Magnetron Sputtering for Water Splitting. In: ChemElectroChem .

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2000) Microstructural evaluation and creep deformation and rupture behavior of 9Cr-1Mo steel base metal, weld metal and weld joint. In: Workshop on Creep, Fatigue and Creep-Fatigue Interaction, JAN 20-22, 1999, Indira Gandhi Centre Atomic Research, Kalpakkam, India, pp. 217-221.

Laha, K and Chandravathi, KS and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (1999) Tensile flow behaviour of 2.25Cr-1Mo ferritic steel base metal and simulated heat affected zone structures of 2.25Cr-1Mo weld joint. In: Zeitschrift für Metallkunde, 90 (6). 449-455 .

Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.

Laha, K and Latha, S and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) Comparison of creep behaviour of 2.25Cr-1Mo/9Cr - 1Mo dissimilar weld joint with its base and weld metals. In: Materials Science and Technology, 17 (10). pp. 1265-1272.

Lahiri, AK and Yogambha, R and Dayal, Pranesh and Seetharaman, S (2003) Foam in iron and steelmaking. In: High Temperature Materials and Processes, 22 (5-6). pp. 345-351.

Lahiri, AK (1971) Free energy of mixing of divalent basic oxides with silica. In: Transactions of the Faraday Society, 67 (586). pp. 2952-2960.

Lahiri, AK (1979) Multicomponent multiphase equilibria. In: Fluid Phase Equilibria, 3 (2-3). pp. 113-121.

Lahiri, AK (1980) The effect of particle size distribution on TG. In: Thermochimica Acta, 40 (2). pp. 289-295.

Lahiri, AK and Ray, HS (1982) Effect of experimental parameters on non-isothermal TG. In: Thermochimica Acta, 55 (1). pp. 97-111.

Lahiri, AK and Seetharaman, S (2002) Foaming behavior of slags. In: Metallurgical and Materials Transactions B, 33 (3). pp. 499-502.

Lahiri, Arka and Abinandanan, TA and Choudhury, Abhik (2017) Theoretical and Numerical Study of Growth in Multi-Component Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 4463-4476.

Lahiri, Arka and Abinandanan, TA and Gururajan, MP and Bhattacharyya, Saswata (2014) Effect of epitaxial strain on phase separation in thin films. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (11). pp. 702-707.

Lahiri, Arka and Choudhury, Abhik (2019) Dendrite tip selection during isothermal free growth in multi-component alloys: Marginal stability theories and insights from phase-field simulations. In: COMPUTATIONAL MATERIALS SCIENCE, 158 . pp. 209-218.

Lahiri, Arka and Choudhury, Abhik (2015) Effect of Surface Energy Anisotropy on the Stability of Growth Fronts in Multiphase Alloys. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 68 (6). pp. 1053-1057.

Lahiri, Arka and Choudhury, Abhik (2017) Revisiting Jackson-Hunt calculations: Unified theoretical analysis for generic multi-phase growth in a multi-component system. In: ACTA MATERIALIA, 133 . pp. 316-332.

Lahiri, Arka and Choudhury, Abhik (2017) Theoretical and numerical investigation of diffusive instabilities in multi-component alloys. In: JOURNAL OF CRYSTAL GROWTH, 459 . pp. 1-12.

Lahiri, Arka and Tiwary, Chandrashekhar and Chattopadhyay, Kamanio and Choudhury, Abhik (2017) Eutectic colony formation in systems with interfacial energy anisotropy: A phase field study. In: COMPUTATIONAL MATERIALS SCIENCE, 130 . pp. 109-120.

Lakkakula, Jaya and Krause, Rui Werner Macedo and Ndinteh, Derek Tantoh and Vijaylakshmi, SP and Raichur, Ashok M (2012) Detailed investigation of a gamma-cyclodextrin inclusion complex with L-thyroxine for improved pharmaceutical formulations. In: JOURNAL OF INCLUSION PHENOMENA AND MACROCYCLIC CHEMISTRY, 74 (1-4). pp. 397-405.

Lakkakula, Jaya R and Kurapati, Rajendra and Tynga, Ivan and Abrahamse, Heidi and Raichur, Ashok M and Krause, Rui Werner Macedo (2016) Cyclodextrin grafted calcium carbonate vaterite particles: efficient system for tailored release of hydrophobic anticancer or hormone drugs. In: RSC ADVANCES, 6 (106). pp. 104537-104548.

Lakshmi, RV and Bera, P and Chakradhar, RPS and Choudhury, B and Pawar, SP and Bose, S and Nair, RU and Barshilia, HC (2019) Enhanced microwave absorption properties of PMMA modified MnFe 2 O 4 -polyaniline nanocomposites. In: Physical Chemistry Chemical Physics, 21 (9). pp. 5068-5077.

Lakshmikanthan, A and Prabhu, TR and Babu, US and Koppad, PG and Gupta, M and Krishna, M and Bontha, S (2020) The effect of heat treatment on the mechanical and tribological properties of dual size SiC reinforced A357 matrix composites. In: Journal of Materials Research and Technology, 9 (3). pp. 6434-6452.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Lakshminarasimha, S and Bosco, FSD and Gupta, GS (2024) Quantification of powder phase transient accumulation behaviour in gas�powder�liquid flow through a packed bed with the cohesive zone of a blast furnace. In: Chemical Engineering Research and Design, 202 . pp. 49-59.

Lakshminarasimha, S and Maurya, A and Gupta, GS and Arun Chaitanya, GV (2022) Quantification of powder holdups in the presence of a cavity with lateral gas–powder injection in a packed bed. In: Canadian Journal of Chemical Engineering .

Lal, D and Kumar, P and Bathe, R and Sampath, S and Jayaram, V (2021) Effect of microstructure on fracture behavior of freestanding plasma sprayed 7 wt.% Y2O3 stabilized ZrO2. In: Journal of the European Ceramic Society, 41 (7). pp. 4294-4301.

Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.

Lala, SRF and Gupta, A and Srivastava, C (2022) Effect of Deposition Temperature on the Evolution of Texture, Grain Boundary Constitution and Corrosion Behaviour of Sn–Cr Coatings. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Lala, SRF and Gupta, A and Srivastava, C (2021) Evolution of Texture, Strain, and Grain Boundary Constitution in Copper�Chromium Coatings and its Effect on Coating Corrosion Behavior. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Lala, SRF and Gupta, A and Srivastava, C (2022) Texture evolution and corrosion behaviour of Sn–1.5 wt% Cr coatings containing Graphene oxide. In: Philosophical Magazine, 102 (6). 522 -541.

Lala, SRF and Singh, AP and Gireesh, KV and Srivastava, C (2024) Chromium partitioning induced evolution of texture, grain boundary constitution, and corrosion behavior of CusbndCr coatings electrodeposited at different temperatures. In: Materials Characterization, 210 .

Lala, SRF and Singh, AP and Singh, S and Tiwari, SC and Srivastava, C (2023) Effect of molybdenum partitioning on the evolution of microstructure, grain boundary constitution and corrosion behaviour of electrodeposited zinc-molybdenum coatings. In: Materialia, 27 .

Lala, SRF and Srivastava, C (2022) Correlation Between Texture, Grain Boundary Constitution and Corrosion Behaviour of Copper–Chromium Coatings Containing Graphene Oxide. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Lalitha, K and Das, Shamiparna and Kalyani, Ajay Kumar and Garg, Rohini and Ranjan, Rajeev (2012) Nucleation-Growth Mode of Cubic-Tetragonal Transition with Coexistence of Phases over a Wide Temperature Interval in the High Temperature Ferroelectric Systems PbTiO3-BiMeO3:Me = Sc , and Zn1/2Ti1/2. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95 (8, SI). pp. 2635-2639.

Lalitha, K and Fancher, Chris M and Jones, Jacob L and Ranjan, Rajeev (2015) Field induced domain switching as the origin of anomalous lattice strain along non-polar direction in rhombohedral BiScO3-PbTiO3 close to the morphotropic phase boundary. In: APPLIED PHYSICS LETTERS, 107 (5).

Lalitha, K and Kalyani, Ajay Kumar and Ranjan, Rajeev (2014) Analogous stress and electric field driven structural transformation and decrease in polarization coherence on poling around the morphotropic phase boundary in BiScO3-PbTiO3. In: PHYSICAL REVIEW B, 90 (22).

Lalitha, KV and Fitch, Andy N and Ranjan, Rajeev (2013) Correlation between enhanced lattice polarizability and high piezoelectric response in BiScO3-PbTiO3. In: PHYSICAL REVIEW B, 87 (6).

Landi, Giovanni and Subbiah, Vijaya and Reddy, K Srinivas and Sorrentino, Andrea and Sambandam, Anandan and Ramamurthy, Praveen C and Neitzert, Heinz-Christoph (2018) Evidence of Bipolar Resistive Switching Memory in Perovskite Solar Cell. In: IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 6 (1). pp. 454-463.

Laurila, T and Karppinen, J and Vuorinen, V and Li, J and Paul, A and Paulasto-Krockel, M (2012) Effect of isothermal aging and electromigration on the microstructural evolution of solder interconnections during thermomechanical loading. In: Journal of Electronic Materials, 41 (11). pp. 3179-3195.

Laurila, T and Karppinen, J and Vuorinen, V and Paul, A and Paulasto-Krockel, M (2011) Effect of Constant and Cyclic Current Stressing on the Evolution of Intermetallic Compound Layers. In: Journal of Electronic Materials, 40 (7). pp. 1517-1526.

Laurila, Tomi and Paul, Aloke (2016) Understanding the Growth of Interfacial Reaction Product Layers between Dissimilar Materials. In: CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 41 (2). pp. 73-105.

Laurila, Tomi and Paul, Aloke and Dong, Hongqun and Vuorinen, Vesa (2017) Thermodynamic-Kinetic Method on Microstructural Evolutions in Electronics. [Book Chapter]

Lavakumar, A and Hwang, S and Okada, K and Park, M-H and Chokshi, AH and Tsuji, N (2024) Real-time Observation of Stress-strain Behavior beyond Necking in Martensitic Steel by in-situ Synchrotron X-ray Diffraction. In: ISIJ International, 64 (12). pp. 1847-1852.

Lee, Dong-Hyun and Lee, Jung-A and Zhao, Yakai and Lu, Zhaoping and Suh, Jin-Yoo and Kim, Ju-Young and Ramamurty, Upadrasta and Kawasaki, Megumi and Langdon, Terence G and Jang, Jae-il (2017) Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis. In: ACTA MATERIALIA, 140 . pp. 443-451.

Lee, Dong-Hyun and Seok, Moo-Young and Zhao, Yakai and Choi, In-Chul and He, Junyang and Lu, Zhaoping and Suh, Jin-Yoo and Ramamurty, Upadrasta and Kawasaki, Megumi and Langdon, Terence G and Jang, Jae-il (2016) Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys. In: ACTA MATERIALIA, 109 . pp. 314-322.

Lee, JY and Han, KH and Park, JM and Chattopadhyay, K and Kim, WT and Kim, DH (2006) Deformation and evolution of shear bands under compressive loading in bulk metallic glasses. In: Acta Materialia, 54 (19). pp. 5271-5279.

Lee, Jung-A and Lee, Dong-Hyun and Seok, Moo-Young and Choi, In-Chul and Han, Heung Nam and Tsui, Ting Y and Ramamurty, Upadrasta and Jang, Jae-il (2017) Significant strengthening of nanocrystalline Ni sub-micron pillar by cyclic loading in elastic regime. In: SCRIPTA MATERIALIA, 140 . pp. 31-34.

Lee, Jung-A and Seo, Brandon B and Choi, In-Chul and Seok, Moo-Young and Zhao, Yakai and Jahed, Zeinab and Ramamurty, Upadrasta and Tsui, Ting Y and Jang, Jae-il (2016) Time-dependent nanoscale plasticity in nanocrystalline nickel rods and tubes. In: SCRIPTA MATERIALIA, 112 . pp. 79-82.

Lee, Jung-A and Seok, Moo-Young and Zhao, Yakai and Choi, In-Chul and Lee, Dong-Hyun and Seo, Brandon B and Ramamurty, Upadrasta and Tsui, Ting Y and Jang, Jae-Il (2017) Statistical analysis of the size- and rate-dependence of yield and plastic flow in nanocrystalline copper pillars. In: ACTA MATERIALIA, 127 . pp. 332-340.

Leelavathi, A and Madras, Giridhar and Ravishankar, N (2015) Ultrathin Au nanowires supported on rGO/TiO2 as an efficient photoelectrocatalyst. In: JOURNAL OF MATERIALS CHEMISTRY A, 3 (33). pp. 17459-17468.

Legese, SS and Chandravanshi, D and Gadhavajhala, SSS and Pal, V and Serbesa, AT and Srinivasan, B and Olu, FE and Tiwary, CS (2024) Effect of cooling rate on the microstructure and thermal conductivity of 5 at Cu�Bi2Te3. In: Journal of Materials Science .

Lera, IL and Khasnabis, S and Wangatia, LM and Femi, OE and Ramamurthy, PC (2022) Insights into electrochemical behavior and kinetics of NiP on PEDOT:PSS/reduced graphene oxide as high-performance electrodes for alkaline urea oxidation. In: Journal of Solid State Electrochemistry, 26 (1). 195 -209.

Lera, IL and Khasnabis, S and Wangatia, LM and Femi, OE and Ramamurthy, PC (2021) Polypyrrole@polyaniline-reduced graphene oxide nanocomposite support material and Cobalt for the enhanced electrocatalytic activity of nickel phosphide microsphere towards alkaline urea oxidation. In: Materials Research Express, 8 (9).

Lera, IL and Khasnabis, S and Wangatia, LM and Femi, OE and Ramamurthy, PC (2022) An innovative catalyst of PdNiP nanosphere deposited PEDOT:PSS/rGO hybrid material as an efficient electrocatalyst for alkaline urea oxidation. In: Polymer Bulletin .

Lera, IL and Khasnabis, S and Wangatia, LM and Olu, FE and Ramamurthy, PC (2022) Insights into the Electrochemical Behavior and Kinetics of NiP@PANI/rGO as a High-Performance Electrode for Alkaline Urea Oxidation. In: Electrocatalysis .

Li, Binbin and Agarwal, Vipul and Ho, Dominic and Vede, Jean-Pierre and Iyer, K Swaminathan (2018) Systematic assessment of surface functionality on nanoscale patterns for topographic contact guidance of cells. In: NEW JOURNAL OF CHEMISTRY, 42 (9). pp. 7237-7240.

Li, K and Jacob, KT and Kale, GM (2010) La-Doped Ba2In2O5 Electrolyte: Pechini Synthesis, Microstructure, Electrical Conductivity, and Application for CO Gas Sensing. In: Journal of the Electrochemical Society, 157 (8). J285-J292.

Li, Wei and Barton, Phillip T and Kiran, MSRN and Burwood, Ryan P and Ramamurty, U and Cheetham, Anthony K (2011) Magnetic and Mechanical Anisotropy in a Manganese 2-Methylsuccinate Framework Structure. In: Chemistry - A European Journal, 17 (44). pp. 12429-12436.

Li, Xs and Dafalias, YF (2001) Dilatancy for cohesionless soils - Discussion. In: Geotechnique, 51 (8). pp. 729-730.

Liang, Q and Wang, D and Zheng, Y and Zhao, S and Gao, Y and Hao, Y and Yang, R and Banerjee, D and Fraser, HL and Wang, Y (2020) Shuffle-nanodomain regulated strain glass transition in Ti-24Nb-4Zr-8Sn alloy. In: Acta Materialia, 186 . pp. 415-424.

Lin, C-J and Hwang, T-L and Wang, RYL and Nain, A and Shih, R-H and Chang, L and Lin, H-J and Harroun, SG and Chang, H-T and Huang, C-C (2024) Augmenting Neutrophil Extracellular Traps with Carbonized Polymer Dots: A Potential Treatment for Bacterial Sepsis. In: Small .

Lin, C-J and Hwang, T-L and Wang, RYL and Nain, A and Shih, R-H and Chang, L and Lin, H-J and Harroun, SG and Chang, H-T and Huang, C-C (2024) Augmenting Neutrophil Extracellular Traps with Carbonized Polymer Dots: A Potential Treatment for Bacterial Sepsis. In: Small .

Lin, S-C and Joshi, R and Ganguly, A and Barman, SR and Pal, A and Kaswan, K and Liu, K-L and Nain, A and Kao, F-C and Lin, Z-H (2024) Ultrasound-guided drug delivery system utilizing piezocatalytic MoS2 nanomaterials for anti-inflammatory therapy. In: Nano Energy, 127 .

Little, EA and Sastrya, DH and Vasu, KI (1973) Thermal activation parameters for low temperature deformation of alpha-hafnium. In: Scripta Metallurgica, 7 (2). 131 -135.

Liu, Jinxuan and Zhou, Wencai and Liu, Jianxi and Fujimori, Yamato and Higashino, Tomohiro and Imahori, Hiroshi and Jiang, Xue and Zhao, Jijun and Sakurai, Tsuneaki and Hattori, Yusuke and Matsuda, Wakana and Seki, Shu and Garlapati, Suresh Kumar and Dasgupta, Subho and Redel, Engelbert and Sunag, Licheng and Woll, Christof (2016) A new class of epitaxial porphyrin metal-organic framework thin films with extremely high photocarrier generation efficiency: promising materials for all-solid-state solar cells. In: JOURNAL OF MATERIALS CHEMISTRY A, 4 (33). pp. 12739-12747.

Loganathan, Archana and Sharma, Amit and Rudolf, Chris and Zhang, Cheng and Nautiyal, Pranjal and Suwas, Satyam and Boesl, Benjamin and Agarwal, Arvind (2017) In-situ deformation mechanism and orientation effects in sintered 2D boron nitride nanosheets. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 708 . pp. 440-450.

Loganathan, S and Sankaran, S (2021) Surface chemical and selective flocculation studies on iron oxide and silica suspensions in the presence of xanthan gum. In: Minerals Engineering, 160 .

Lollchund, MR and Gupta, GS and Mulley, NK (2009) Study of gas-fines in decreasing gas velocity in a packed bed. In: In: Engineering Our Future: Are We up to the Challenge, 27-30 September 2009, Perth, Australia.

Long, OY and Sai Gautam, G and Carter, EA (2021) Assessing cathode property prediction: Via exchange-correlation functionals with and without long-range dispersion corrections. In: Physical Chemistry Chemical Physics, 23 (43). pp. 24726-24737.

Lord, Eric A and Ranganathan, S and Subramaniam, Anandh (2002) Stacking Sequences and Symmetry Properties of Trigonal Vacancy-ordered Phases ($\tau$ phases). In: Philosophical Magazine A, 82 (2). pp. 255-268.

Lord, EA and Ramakrishnan, K and Ranganathan, S (2000) An algorithm for generating quasiperiodic patterns and their approximants. In: Bulletin of Materials Science, 23 (2). pp. 119-123.

Lord, EA and Ranganathan, S (2001) Sphere packing, helices and the polytope {3,3,5}. In: European Physical Journal D, 15 (3). pp. 335-343.

Lord, EA and Ranganathan, S (2004) The γ-brass structure and the Boerdijk–Coxeter helix. In: 8th International Conference on Quasicrystals, SEP 08-13, 2002, Bangalore, INDIA.

Lord, EA and Ranganathan, S (2004) The \gamma-brass structure and the Boerdijk–Coxeter helix. In: Journal of Non-Crystalline Solids, 334-33 . pp. 121-125.

Lord, EA and Ranganathan, S and Kulkarni, UD (2001) Quasicrystals: tiling versus clustering. In: Philosophical Magazine A-Physics Of Condensed Matter Structure Defects And Mechanical Properties, 81 (11). pp. 2645-2651.

Lord, EA and Ranganathan, S and Kulkarni, UD (2000) Tilings, coverings, clusters and quasicrystals. In: Current Science, 78 (1). pp. 64-72.

Lord, Eric A (2002) Helical structures: The geometry of protein helices and nanotubes. In: Structural Chemistry, 13 (3-4). pp. 305-314.

Lord, Eric A (2003) Indexing schemes for quasilattices. In: Philosophical Magazine, 83 (29). pp. 3283-3307.

Lord, Eric A (1997) Triply-periodic balance surfaces. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 130 . pp. 279-295.

Louzguine, DV and Ko, MS and Ranganathan, S and Inoue, A (2001) Nanocrystallization of the $Fd_3m$ $Ti_2Ni$-Type Phase in Hf-Based Metallic Glasses. In: Journal of Nanoscience and Nanotechnology, 1 (2). pp. 185-190.

Lu, K and Chauhan, A and Knöpfle, F and Aktaa, J (2022) Effective and back stresses evolution upon cycling a high-entropy alloy. In: Materials Research Letters, 10 (6). pp. 369-376.

Lu, K and Chauhan, A and Litvinov, D and Aktaa, J (2022) Temperature-dependent cyclic deformation behavior of CoCrFeMnNi high-entropy alloy. In: International Journal of Fatigue, 160 .

Lu, K and Chauhan, A and Litvinov, D and Schneider, M and Laplanche, G and Aktaa, J (2023) Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy. In: Journal of the Mechanics and Physics of Solids, 180 .

Lu, K and Knöpfle, F and Chauhan, A and Jeong, HT and Litvinov, D and Walter, M and Kim, WJ and Aktaa, J (2022) Low-cycle fatigue behavior and deformation mechanisms of a dual-phase Al0.5CoCrFeMnNi high-entropy alloy. In: International Journal of Fatigue, 163 .

Lu, K and Knöpfle, F and Chauhan, A and Litvinov, D and Schneider, M and Laplanche, G and Aktaa, J (2022) Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi. In: Scripta Materialia, 220 .

Lu, W and Wang, J and Sai Gautam, G and Canepa, P (2021) Searching Ternary Oxides and Chalcogenides as Positive Electrodes for Calcium Batteries. In: Chemistry of Materials, 33 (14). pp. 5809-5821.

Luhadiya, N and Choyal, V and Kundalwal, SI and Sahu, SK (2023) Investigation of unified impact of Ti adatom and N doping on hydrogen gas adsorption capabilities of defected graphene sheets. In: Journal of Molecular Graphics and Modelling, 119 .

Lyman, Charles E and Newbury, Dale E and Goldstein, Joseph I and Williams, David B and Romig, Alton D and Armstrong, John T and Echlin, Patrick and Fiori, Charles E and Joy, David C and Lifshin, Eric and Peters, Klaus-Ruediger (1993) Scanning Electron Microscopy, X-Ray Microanalysis and Analytical Electron Microscopy. In: Journal of the Electrochemical Society of India, 42 (4). pp. 262-263.

M

Madhavan, R and Gurao, NP and Suwas, Satyam (2012) Deformation and Recrystallization texture evolution in Nano-crystalline Nickel. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, pp. 508-517.

Madhavan, R and Gurao, NP and Suwas, Satyam (2014) Texture evolution during annealing of large-strain deformed nanocrystalline nickel. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (3). pp. 141-149.

Madhavan, R and Kalsar, R and Ray, RK and Suwas, S (2015) Role of stacking fault energy on texture evolution revisited. In: 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM 17), AUG 24-29, 2014, Dresden, GERMANY.

Madhavan, R and Nagaraju, S and Suwas, Satyam (2015) Texture Evolution in Nanocrystalline Nickel: Critical Role of Strain Path. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (2). pp. 915-925.

Madhavan, R and Ray, RK and Suwas, S (2016) Micro-mechanical aspects of texture evolution in nickel and nickel-cobalt alloys: role of stacking fault energy. In: PHILOSOPHICAL MAGAZINE, 96 (30, A). pp. 3177-3199.

Madhavan, R and Ray, RK and Suwas, S (2014) New insights into the development of microstructure and deformation texture in nickel-60 wt.% cobalt alloy. In: ACTA MATERIALIA, 78 . pp. 222-235.

Madhavan, R and Ray, RK and Suwas, S (2014) Texture transition in cold-rolled nickel-40 wt.% cobalt alloy. In: ACTA MATERIALIA, 74 . pp. 151-164.

Madhavan, R and Suwas, S (2015) Evolution of deformation texture and magnetic properties in a nanocrystalline nickel-20 wt% cobalt alloy. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 378 . pp. 239-245.

Madhavan, R and Suwas, S (2016) Micro-mechanisms of deformation texture evolution in nanocrystalline nickel-cobalt alloys. In: ACTA MATERIALIA, 121 . pp. 46-58.

Madhavan, R and Suwas, Satyam (2014) Deformation of nanograined Ni-60Co alloy with low stacking fault energy. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (9). pp. 548-555.

Madhavi, V and Kondaiah, P and Shaik, H and Kumar, KN and Kumar Naik, TSS and Rao, GM and Ramamurthy, PC (2021) Fabrication of porous 1D WO3 NRs and WO3/BiVO4 hetero junction photoanode for efficient photoelectrochemical water splitting. In: Materials Chemistry and Physics, 274 .

Madhu, H C and Kumar, P Ajay and Perugu, Chandra S and Kailas, Satish V (2018) Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (3). pp. 1318-1326.

Madhu, HC and Edachery, V and Lijesh, KP and Perugu, CS and Kailas, SV (2020) Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4086-4099.

Mahadule, D and Kumar, D and Dandekar, TR and Khatirkar, RK and Suwas, S (2023) Modelling of flow stresses during hot deformation of Ti–6Al–4Mo–1V–0.1Si alloy. In: Journal of Materials Research .

Mahadule, Diksha and Khatirkar, Rajesh K and Gupta, Saurabh K and Gupta, Aman and Dandekar, Tushar R (2022) Microstructure evolution and corrosion behaviour of a high Mo containing α + β titanium alloy for biomedical applications. In: Journal of Alloys and Compounds, 912 . ISSN 09258388

Mahakal, S and Pathan, HM and Prasad, M and Rondiya, S and Patole, SP and Jadkar, SR (2023) Modification in Toxicity of l-Histidine-Incorporated ZnO Nanoparticles toward Escherichia coli. In: ACS Omega, 8 (39). 34354 -34363.

Mahale, B and Kumar, N and De, A and Pandey, R and Ranjan, R (2020) A comparative study of energy harvesting performance of polymer-piezoceramic composites fabricated with different piezoceramic constituents. In: International Journal of Energy Research .

Mahale, Bhoopesh and Kumar, Naveen and Pandey, Rishikesh and Ranjan, Rajeev (2019) High Power Density Low-Lead-Piezoceramic-Polymer Composite Energy Harvester. In: IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 66 (4). pp. 789-796.

Mahale, Bhoopesh and Pandey, Rishikesh and Kumar, Naveen and Ranjan, Rajeev (2017) Grain-size dependent electric-field induced structural changes and its role in determining the piezoelectric response of 0-3 piezoceramic-polymer composite. In: JOURNAL OF APPLIED PHYSICS, 122 (15).

Mahapatra, PL and Kumbhakar, P and Lahiri, B and Sinha, SK and Tiwary, CS (2022) Real-time quality monitoring and organic pollutants degradation of water using atomically thin Magnesiochromite. In: Materials Research Bulletin, 146 .

Mahapatra, PL and Singh, AK and Tromer, R and Karthik, R and Ambresha, M and Costin, G and Lahiri, B and Kundu, TK and Ajayan, PM and Altman, EI and Galvao, DS and Tiwary, CS (2023) Energy harvesting using two-dimensional (2D) d-silicates from abundant natural minerals. In: Journal of Materials Chemistry C (6).

Mahapatra, PL and Singh, AK and Tromer, R and Kumbhakar, P and Sinha, SK and Lahiri, B and Kundu, TK and Galvao, DS and Tiwary, CS (2023) Energy harvesting using two-dimensional magnesiochromite (MgCr2O4). In: Materials Today Nano, 23 .

Mahapatra, PL and Tromer, R and Jayakumar, A and Costin, G and Lahiri, B and Nair, RR and Roy, D and Roy, AK and Pandey, P and Galvao, DS and Tiwary, CS (2024) 3D-printed flexible energy harvesting devices designed using non-layered two-dimensional natural tourmaline silicates. In: Journal of Materials Chemistry C, 12 (10). pp. 3418-3429.

Mahapatra, PL and Tromer, R and Pandey, P and Costin, G and Lahiri, B and Chattopadhyay, K and Ajayan, PM and Roy, AK and Galvao, DS and Kumbhakar, P and Tiwary, CS (2022) Synthesis and Characterization of Biotene: A New 2DÂ Natural Oxide From Biotite. In: Small .

Mahapatra, SK and Ashwin, KP and Ghosal, A (2022) Modelling of Cable-Driven Continuum Robots with General Cable Routing: a Comparison. In: 6th IFToMM Asian Mechanisms and Machine Science Conference, Asian MMS 2021, 15-18 Dec 2021, Virtual, Online, pp. 345-353.

Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.

Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.

Maheshwari, Ramesh and Raman, Anantanarayanan (2014) The knight of sugar industry: T. S. Venkatraman (1884-1963). In: CURRENT SCIENCE, 106 (8). pp. 1146-1149.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2012) Comparison of rhodamine B degradation under UV irradiation by two phases of titania nano-photocatalyst. In: JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 110 (2). pp. 847-855.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2013) Effect of Metal Ions (Ag, Co, Ni, and Pd) on the Visible Light Degradation of Rhodamine B by Carbon-Covered Alumina-Supported TiO2 in Aqueous Solutions. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 52 (5). pp. 1783-1794.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2013) Metal doped nanosized titania used for the photocatalytic degradation of rhodamine B dye under visible-light. In: Journal of Nanoscience and Nanotechnology, 13 (7). pp. 4934-4942.

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Krause, Rui W and Mamba, Bhekie B and Raichur, Ashok M (2012) Synthesis and characterization of carbon-covered alumina (CCA) supported TiO2 nanocatalysts with enhanced visible light photodegradation of Rhodamine B. In: Journal of Nanoparticle Research, 14 (4).

Mahlambi, Mphilisi M and Mishra, Ajay K and Mishra, Shivani B and Raichur, Ashok M and Mamba, Bhekie B and Krause, Rui W (2012) Layer-by-Layer Self-Assembled Metal-Ion- (Ag-, Co-, Ni-, and Pd-) Doped TiO2 Nanoparticles: Synthesis, Characterisation, and Visible Light Degradation of Rhodamine B. In: JOURNAL OF NANOMATERIALS, 2012 .

Maiti, S and Bose, S (2022) Free-standing graphene oxide membrane works in tandem with confined interfacial polymerization of polyamides towards excellent desalination and chlorine tolerance performance. In: Nanoscale Advances, 4 (2). pp. 467-478.

Maiti, S and Islam, SS and Bose, S (2022) Covalent organic framework assisted interlocked graphene oxide based thin-film composite membrane for effective water remediation. In: Environmental Science: Water Research and Technology, 9 (1). pp. 249-264.

Maitra, Urmimala and Prasad, K Eswar and Ramamurty, U and Rao, CNR (2009) Mechanical properties of nanodiamond-reinforced polymer-matrix composites. In: Solid State Communications, 149 (39-40). pp. 1693-1697.

Maity, D and Pal, D and Saha, S and Punetha, P and Sarkar, D and De, D and Khan, GG and Mandal, K (2022) CeOx as Surface Passivation and Hole Transfer Catalyst Layer Boosting Solar Water Oxidation of ZnFe2O4 Nanorods Photoanode. In: Advanced Materials Interfaces .

Majhi, J and Mondal, AK and Basu, A and Dieringa, H and Kumar, S (2022) Influence of Ca+Bi on tensile and strain hardening behaviour of AZ91 alloy. In: Materials Science and Technology (United Kingdom), 38 (6). pp. 377-389.

Majumdar, B and Chattopadhyay, K (2000) Aligned Monotectic Growth in Unidirectionally Solidified Zn-Bi Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A, 31 (7). pp. 1833-1842.

Majumdar, B and Chattopadhyay, K (1996) The rayleigh instability and the origin of rows of droplets in the monotectic microstructure of zinc-bismuth alloys. In: Metallurgical and Materials Transactions A, 27 (7). pp. 2053-2057.

Majumdar, B and Goswami, R and Chattopadhyay, K (1995) Monotectic microstructure in a Zn-0.6at% Bi alloy at near equilibrium and nonequilibrium situation. In: Non Linear Phenomena in Materials Science III. Instabilities and Patterning. Indo-French Workshop on Instabilities and Patterning and of the International Meeting on Non Linear Phenomena in Materials Science, Dec. 1994, Switzerland, pp. 11-18.

Majumdar, B and Raja, Manivel M and Narayanasamy, A and Chattopadhyay, K (1997) Structural and magnetic investigations on the metastable phases of the mechanically alloyed Fe-Cu system. In: Journal of Alloys and Compounds, 248 (1-2). pp. 192-200.

Makineni, SK and Nithin, B and Chattopadhyay, K (2015) Synthesis of a new tungsten-free gamma-gamma ` cobalt-based superalloy by tuning alloying additions. In: ACTA MATERIALIA, 85 . pp. 85-94.

Makineni, SK and Nithin, B and Chattopadhyay, K (2015) A new tungsten-free gamma-gamma ` Co-Al-Mo-Nb-based superalloy. In: SCRIPTA MATERIALIA, 98 . pp. 36-39.

Makineni, SK and Nithin, B and Palanisamy, D and Chattopadhyay, K (2016) Phase evolution and crystallography of precipitates during decomposition of new ``tungsten-free'' Co(Ni)-Mo-Al-Nb gamma-gamma ` superalloys at elevated temperatures. In: JOURNAL OF MATERIALS SCIENCE, 51 (17). pp. 7843-7860.

Makineni, SK and Samanta, A and Rojhirunsakool, T and Alam, T and Nithin, B and Singh, AK and Banerjee, R and Chattopadhyay, K (2015) A new class of high strength high temperature Cobalt based gamma-gamma ` Co-Mo-Al alloys stabilized with Ta addition. In: ACTA MATERIALIA, 97 . pp. 29-40.

Makineni, SK and Sharma, A and Pandey, A and Chattopadhyay, K (2021) An Overview on Co-Base Alloys for High Temperature Applications. [Book Chapter]

Makineni, SK and Singh, MP and Chattopadhyay, K (2021) Low-Density, High-Temperature Co Base Superalloys. In: Annual Review of Materials Research, 51 . pp. 187-208.

Makineni, Surendra Kumar and Sugathan, Sandeep and Meher, Subhashish and Banerjee, Rajarshi and Bhattacharya, Saswata and Kumar, Subodh and Chattopadhyay, Kamanio (2017) Enhancing elevated temperature strength of copper containing aluminium alloys by forming L1(2) Al3Zr precipitates and nucleating theta `' precipitates on them. In: SCIENTIFIC REPORTS, 7 .

Malakar, A and Mandal, S and Sen Gupta, R and Islam, SS and Manna, K and Bose, S (2023) Polyoxometalate-immobilized carbon nanotube constructs triggered by host-guest assembly result in excellent electromagnetic interference shielding. In: Nanoscale (8).

Malakar, A and Mandal, S and Sen Gupta, R and Kashyap, V and Raj, R and Manna, K and Bose, S (2024) �Donor-acceptor�, �interpenetrating polymer network� and �electrostatic self-assembly� work in tandem to achieve extraordinary specific shielding effectiveness. In: Nanoscale, 16 (32). pp. 15343-15357.

Malakar, A and Mandal, S and Sen Gupta, R and Manna, K and Parasuram, S and Misra, A and Bose, S (2023) Mussel-inspired double cross-linked interpenetrating network with unique mechanical properties using di-diol complexation. In: SPE Polymers, 4 (3). pp. 83-92.

Malik, A and Magisetty, R and Kumar, V and Shukla, A and Kandasubramanian, B (2020) Dielectric and conductivity investigation of polycarbonate-copper phthalocyanine electrospun nonwoven fibres for electrical and electronic application. In: Polymer-Plastics Technology and Materials, 59 (2). pp. 154-168.

Malik, A and Nath, B and Ramamurthy, PC and Panchal, A and Shrivastava, M (2022) Influence of Graphene Dispersion in P3HT-Based Thin Film Organic Field Effect Transistors. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore, India.

Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.

Mallik, RC and Anbalagan, R and Rogl, G and Royanian, E and Heinrich, P and Bauer, E and Rogl, P and Suwas, S (2013) Thermoelectric properties of Fe(0.2)Co(3.8)Sbi(12-x)Te(x) skutterudites. In: ACTA MATERIALIA, 61 (18). pp. 6698-6711.

Mallya, Ashwini N and Kottokkaran, Ranjith and Ramamurthy, Praveen C (2014) Conducting polymer-carbon black nanocomposite sensor for volatile organic compounds and correlating sensor response by molecular dynamics. In: SENSORS AND ACTUATORS B-CHEMICAL, 201 . pp. 308-320.

Mallya, Ashwini N and Kumar, Yashavanth GS and Ranjan, Rajeev and Ramamurthy, Praveen C (2012) Dielectric relaxations above room temperature in DMPU derived polyaniline film. In: PHYSICA B-CONDENSED MATTER, 407 (18). pp. 3828-3832.

Mallya, Ashwini N and Poduval, Mithrabinda K and Ramamurthy, Praveen C (2019) Design, synthesis, fabrication and simulation of conjugated molecule for detection of lithium ions. In: MATERIALS RESEARCH EXPRESS, 6 (4).

Mallya, Ashwini N and Ramamurthy, Praveen C (2018) Conjugated Molecule Based Sensor for Microbial Detection in Water with E-coli as a Case Study and Elucidation of Interaction Mechanism. In: ELECTROANALYSIS, 30 (6). pp. 1172-1183.

Mallya, Ashwini N and Ramamurthy, Praveen C (2018) Design and Fabrication of a Highly Stable Polymer Carbon Nanotube Nanocomposite Chemiresistive Sensor for Nitrate Ion Detection in Water. In: ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 7 (7). Q3054-Q3064.

Mallya, Ashwini N and Ramamurthy, Praveen C (2014) Investigation of selective sensing of a diamine for aldehyde by experimental and simulation studies. In: ANALYST, 139 (24). pp. 6456-6466.

Mallya, Ashwini N and Ramamurthy, Praveen C (2017) Mechanical Actuation of Conducting Polymer in the Presence of Organic Vapor Stimulus. In: IEEE SENSORS JOURNAL, 17 (11). pp. 3391-3397.

Malviya, Kirtiman D and Oliveira, Eliezer F and Autreto, Pedro A S and Ajayan, Pulickel M and Galvao, Douglas S and Tiwary, Chandra S and Chattopadhyay, Kamanio (2019) Mixing the immiscible through high-velocity mechanical impacts: an experimental and theoretical study. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 52 (44).

Malviya, Kirtiman Deo and Chattopadhyay, K (2016) Temperature- and Size-Dependent Compositionally Tuned Microstructural Landscape for Ag-46 Atom % Cu Nanoalloy Prepared by Laser Ablation in Liquid. In: JOURNAL OF PHYSICAL CHEMISTRY C, 120 (48). pp. 27699-27706.

Malviya, Kirtiman Deo and Chattopadhyay, Kamanio (2015) High quality oxide-free metallic nanoparticles: a strategy for synthesis through laser ablation in aqueous medium. In: JOURNAL OF MATERIALS SCIENCE, 50 (2). pp. 980-989.

Malviya, Kirtiman Deo and Chattopadhyay, Kamanio (2014) Synthesis and Mechanism of Composition and Size Dependent Morphology Selection in Nanoparticles of Ag-Cu Alloys Processed by Laser Ablation Under Liquid Medium. In: JOURNAL OF PHYSICAL CHEMISTRY C, 118 (24). pp. 13228-13237.

Malviya, Kirtiman Deo and Srivastava, Chandan and Chattopadhyay, K (2015) Phase formation and stability of alloy phases in free nanoparticles: some insights. In: RSC ADVANCES, 5 (45). pp. 35541-35550.

Malviya, Kirtiman Deo and Srivastava, Chandan and Chattopadhyay, Kamanio (2017) Phase formation and stability of Ag-60 at%Cu alloy nanoparticles synthesized by chemical routes in aqueous media. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 19 (41). pp. 28006-28013.

Manakari, Vyasaraj and Parande, Gururaj and Doddamani, Mrityunjay and Gaitonde, VN and Siddhalingeshwar, IG and Kishore, * and Shunmugasamy, Vasanth Chakravarthy and Gupta, Nikhil (2015) Dry sliding wear of epoxy/cenosphere syntactic foams. In: TRIBOLOGY INTERNATIONAL, 92 . pp. 425-438.

Manchineella, Shivaprasad and Thrivikraman, Greeshma and Khanum, Khadija K and Ramamurthy, Praveen C and Basu, Bikramjit and Govindaraju, T (2016) Pigmented Silk Nanofibrous Composite for Skeletal Muscle Tissue Engineering. In: ADVANCED HEALTHCARE MATERIALS, 5 (10). pp. 1222-1232.

Mandal, A and Chatterjee, K (2024) The 3 D/4D Printing of Polymeric Scaffolds for Bone Tissue Engineering. [Book Chapter]

Mandal, A and Chatterjee, K (2024) 4D printing for biomedical applications. In: Journal of Materials Chemistry B .

Mandal, A and Chatterjee, K (2022) Emerging trends in humidity-responsive 4D bioprinting. In: Chemical Engineering Journal .

Mandal, RK and Sastry, GVS and Lele, S and Ranganathan, S (1991) Irrational twins in melt spun Al-Mn-Fe-Si alloy. In: Scripta Metallurgica et Materialia, 25 (6). pp. 1477-1482.

Mandal, S and Raj, R and Samanta, K and Kumar, S and Bose, S (2024) Self-Healable Interfaces with Improved Mechanical Properties Induced by Dynamic Network Reconfiguration in Carbon Fiber-Reinforced Epoxy Laminates. In: ACS Applied Materials and Interfaces .

Mandal, Sudipto and Gockel, Brian T and Balachandran, Shanoob and Banerjee, Dipankar and Rollett, Anthony D (2017) Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model. In: INTERNATIONAL JOURNAL OF PLASTICITY, 94 (SI). pp. 57-73.

Mandre, NR and Natarajan, KA (1987) Environmental aspects of bacterial oxidation with respect to the mining and processing of some sulfide minerals. In: Transactions of the Indian Institute of Metals, 40 (2). pp. 128-136.

Mandre, NR and Natarajan, KA (1987) Selective flocculation of sulfides with reference to environmental control. In: Transactions of Indian Institute of Metals, 40 (5). pp. 373-381.

Mangal, M and Rao, CV and Das, NK and Bose, S and Banerjee, T (2024) Impact of cellulose enrichment on castor oil polyurethane sheets: A path to greener materials. In: Journal of Applied Polymer Science .

Mangal, M and Supriya, H and Bose, S and Banerjee, T (2023) Innovations in applications and prospects of non-isocyanate polyurethane bioplastics. In: Biopolymers, 114 (12).

Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.

Manivasagam, G and Suwas, S (2014) Biodegradable Mg and Mg based alloys for biomedical implants. In: MATERIALS SCIENCE AND TECHNOLOGY, 30 (5). pp. 515-520.

Manivel, Raja M and Chattopadhyay, K and Majumdar, B and Narayanasamy, A (2000) Structure and soft magnetic properties of Finemet alloys. In: Journal of Alloys and Compounds, 297 (1-2). pp. 199-205.

Manjumeena, R and Duraibabu, D and Sudha, J and Kalaichelvan, PT (2014) Biogenic nanosilver incorporated reverse osmosis membrane for antibacterial and antifungal activities against selected pathogenic strains: An enhanced eco-friendly water disinfection approach. In: JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, 49 (10). pp. 1125-1133.

Manjumeena, R and Venkatesan, R and Duraibabu, D and Sudha, J and Rajendran, N and Kalaichelvan, PT (2016) Green Nanosilver as Reinforcing Eco-Friendly Additive to Epoxy Coating for Augmented Anticorrosive and Antimicrobial Behavior. In: SILICON, 8 (2). pp. 277-298.

Manjunatha, C and Sunitha, DV and Nagabhushana, H and Sharma, SC and Ashoka, S and Rao, JL and Nagabhushana, BM and Chakradhar, RPS (2012) Structural characterization, EPR and thermoluminescence properties of Cd-1 (-) xNixSiO3 nanocrystalline phosphors. In: MATERIALS RESEARCH BULLETIN, 47 (9). pp. 2306-2314.

Manna, K and Sen Gupta, R and Bose, S (2022) A universal approach to ‘host’ carbon nanotubes on a charge triggered ‘guest’ interpenetrating polymer network for excellent ‘green’ electromagnetic interference shielding. In: Nanoscale .

Manna, R and Sarkar, J and Surappa, MK (1996) Effect of second phase precipitates on recovery and recrystallization behaviour of cold-worked AI2024-SiCp composites. In: Journal of Materials Science, 31 (6). pp. 1625-1631.

Manobalan, S and Bose, S and Sumangala, TP (2024) Effect of cobalt ferrite concentration on the EMI shielding effectiveness of cobalt ferrite/graphene based epoxy composites. In: Polymer Composites .

Manobalan, S and Bose, S and Sumangala, TP (2023) Effect of thickness on the EMI shielding effectiveness of epoxy composites with cobalt ferrite and graphene. In: 2nd International Conference on Future Technologies in Manufacturing, Automation, Design and Energy, 14-16 December 2022, Thiruvettakudy, pp. 128-132.

Manobalan, S and Mahender, C and Rajan Babu, D and Rahaman, A and Sreekanth, MS and Sharma, D and Bose, S and Sumangala, TP (2022) The Mechanical, Dielectric, and EMI Shielding Properties of Nickel Ferrite (NiF)/Graphene (Gr)-Doped Epoxy Composites. In: Journal of Inorganic and Organometallic Polymers and Materials .

Manoharan, SS and Vasanthacharya, NY and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1994) Ferromagnetic La0.6Pb0.4MnO3 thin films with giant magnetoresistance at 300 K. In: Journal of applied physics, 76 (6). 3923-3925 .

Manoharan, Sundar S and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1996) Metal-insulator transition and giant magnetoresistance in La1-xMnO3-delta thin films and superlattices. In: Symposium E on Structure and Properties of Metallic Thin Films and Multilayers, at the Spring Meeting of the European-Materials-Research-Society, MAY 22-26, 1995, STRASBOURG, FRANCE.

Manoharan, Sundar S and Kumar, Dhananjay and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1995) Giant Magnetoresistance in Self-Doped $La{1_x}MnO_{3-\delta}$ Thin Films. In: Journal of Solid State Chemistry, 117 (2). pp. 420-423.

Manoharan, Sundar S and Satyalakshmi, KM and Prasad, V and Suibramanyam, SV and Hegde, MS (1995) Enhanced giant magnetoresistance in magnetic/nonmagnetic LaMno3 oxide multilayers. In: Current Science (Bangalore), 69 (4). 356-358 .

Manoharan, Sundar S and Vasanthacharya, NY and Hegde, MS and Satyalakshmi, KM and Prasad, V and Subramanyam, SV (1994) Ferromagnetic $La_{0.6}Pb_{0.4}Mn0_3$ thin films with giant magnetoresistance at 300 K. In: Journal of Applied Physics, 76 (6). pp. 3923-3925.

Mantha, D and Hajrad, JP (2001) Thermodynamics of surfaces and adsorption in the Fe-O and Fe-O-N systems at 1823 K. In: Metallurgical and Materials Transactions B, 32 (3). pp. 423-427.

Mariappan, VK and Krishnamoorthy, K and Pazhamalai, P and Swaminathan, R and Kim, S-J (2024) Stimulus of Work Function on Electron Transfer Process of Intermetallic Nickel�Antimonide Toward Bifunctional Electrocatalyst for Overall Water Splitting. In: Small .

Marikar, YMF and Vasu, KI (1970) Fluoroborate bath for the plating of iron, cobalt, and nickel. In: Metals and Minerals Review, 9 (2). pp. 5-16.

Marques, Gabriel Cadilha and Garlapati, Suresh Kumar and Chatterjee, Debaditya and Dehm, Simone and Dasgupta, Subho and Aghassi, Jasmin and Tahoori, Mehdi B (2017) Electrolyte-Gated FETs Based on Oxide Semiconductors: Fabrication and Modeling. In: IEEE Transactions on Electron Devices, 64 (1). pp. 279-285. ISSN 0018-9383

Marques, Gabriel Cadilha and Garlapati, Suresh Kumar and Dehm, Simone and Dasgupta, Subho and Hahn, Horst and Tahoori, Mehdi and Aghassi-Hagmann, Jasmin (2017) Digital power and performance analysis of inkjet printed ring oscillators based on electrolyte-gated oxide electronics. In: APPLIED PHYSICS LETTERS, 111 (10).

Marques, Gabriel Cadilha and von Seggern, Falk and Dehm, Simone and Breitung, Ben and Hahn, Horst and Dasgupta, Subho and Tahoori, Mehdi B and Aghassi-Hagmann, Jasmin (2019) Influence of Humidity on the Performance of Composite Polymer Electrolyte-Gated Field-Effect Transistors and Circuits. In: IEEE TRANSACTIONS ON ELECTRON DEVICES, 66 (5). pp. 2202-2207.

Maruoka, N and Lazuardi, F and Maeyama, T and Nogami, Hiroshi and Kitamura, S and Gupta, GS (2008) Influence of bottom stirring conditions on surface reaction rate. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p449-458, 8-11 June, 2008, Sweden Lulea.

Maruoka, Nobuhiro and Lazuardi, Felicia and Nogami, Hiroshi and Gupta, Govind Sharan and Kitamura, Shin-ya (2010) Effect of Bottom Bubbling Conditions on Surface Reaction Rate in Oxygen-Water System. In: ISIJ International, 50 (1). pp. 89-94.

Masa, Suresh Kumar and Mallya, Ambresha Basappa and Dhanapal, Karuppanan and Ramachandra, Ranganath Vemulapad and Kishore, K (2015) Post-failure Analysis and Fractography of In-plane Tension-Tested Tufted Carbon Fabric-Reinforced Epoxy Composite Laminates. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (4). pp. 1581-1586.

Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.

Math, Souvik and Horn, Roger and Jayaram, Vikram and Biswas, Sanjay K (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus. In: Journal of Colloid and Interface Science, 308 (2). pp. 551-561.

Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.

Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.

Matheswaran, M and Padmanabhan, K and Kishore, * (1995) Static and impact behaviour of thermoplastic modified glass fabric/epoxy composites. In: Journal of Materials Science Letters, 14 (13). pp. 951-954.

Mathew, Mary (2011) From polarization to convergence: need to mend the broken patent system. In: Current Science (Bangalore), 101 (3). pp. 279-285.

Mathews, T and Jacob, KT (1994) Phase relations in the system Cu─Ho─O and stability of Cu2Ho2O5. In: Journal of the American Ceramic Society, 77 (1). 133-136 .

Mathews, Tom and Hajra, JP and Jacob, KT (1993) Phase relations and thermodynamic properties of condensed phases in the system calcium-copper-oxygen. In: Chemistry of Materials, 5 (11). 1669-1675 .

Mathews, Tom and Jacob, KT (1993) Decomposition Temperatures of $Cu_2Ln_2O_5$ (Ln=Tb, Dy, Ho, Er, Tm, Yb, and Lu) Compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.

Mathews, Tom and Jacob, KT (1993) Decomposition temperatures of Cu2Ln2O5 (Ln = Tb, Dy, Ho, Er, Tm, Yb, and Lu) compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.

Mathews, Tom and Jacob, KT (1990) Equilibrium oxygen potential for the decomposition of $YBa_2Cu_4O_8$. In: Applied Physics Letters, 57 (5). pp. 511-513.

Mathews, Tom and Jacob, KT (1992) Seebeck Coefficient of Magnetite: A Reinterpretation Invoking Jahn-Teller Entropy. In: Solid State Communications, 84 (10). pp. 975-978.

Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in $YBa_2Cu_3O_{7-\delta}$. In: Metallurgical and Materials Transactions A, 23 (12). pp. 3325-3335.

Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in YBa2Cu3O7−δ. In: Metallurgical and Materials Transactions A, 23A (12). pp. 3325-3335.

Mathews, Tom and Jacob, KT and Hajra, JP (1990) Electrical transport in magnesium aluminate. In: Bulletin of Materials Science, 13 (4). pp. 293-300.

Mathews , Tom and Jacob, Thomas K (1993) Phase relations in the systems Cu–O–R2O3(R = Tm, Lu) and Gibbs energies of formation of Cu2R2O5 compounds. In: Journal of Materials Chemistry, 3 (10). pp. 1025-1029.

Matlapudi, Megha Shyam and Moin, Afrasim and Medishetti, Raghavender and Rajendra, K and Raichur, Ashok M and Kumar, Prashantha BR (2016) Dual Drug Conjugate Loaded Nanoparticles for the Treatment of Cancer. In: CURRENT DRUG DELIVERY, 12 (6). pp. 782-794.

Matsubara, E and Waseda, Y and Jacob, KT (1991) Structural study of YBa2Cu3O7 x thin films using the grazing incidence X ray scattering method. In: Journal of Materials Science Letters, 10 (12). pp. 677-681.

Matsubara, E and Waseda, Y and Jacob, KT (1991) Structural study of YBa2Cu3O7?x thin filsm using the grazing incidence X-ray scattering method. In: Journal of Materials Science Letters, 10 (12). pp. 677-681.

Maurya, HS and Jayaraj, J and Vikram, RJ and Juhani, K and Sergejev, F and Prashanth, KG (2023) Additive manufacturing of TiC-based cermets: A detailed comparison with spark plasma sintered samples. In: Journal of Alloys and Compounds, 960 .

Maurya, HS and Vikram, RJ and Kosiba, K and Juhani, K and Sergejev, F and Suwas, S and Prashanth, KG (2023) Additive manufacturing of CMCs with bimodal microstructure. In: Journal of Alloys and Compounds, 938 .

Maurya, HS and Vikram, RJ and Kumar, R and Rahmani, R and Juhani, K and Sergejev, F and Prashanth, KG (2024) EBSD investigation of microstructure and microtexture evolution on additively manufactured TiC-Fe based cermets�Influence of multiple laser scanning. In: Micron, 180 .

Maurya, S K and Ray, Saibal and Ghosh, Shounak and Manna, Sarbajit and Smitha, T T (2018) A generalized family of anisotropic compact object in general relativity. In: ANNALS OF PHYSICS, 395 . pp. 152-169.

Mazumder, N and Kumar, D and Singh, MP and Makineni, SK and Mukhopadhyay, NK and Chattopadhyay, K (2023) Synergistic effect of multimodal γ’ precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy. In: Scripta Materialia, 223 .

Mehrotra, S and Kalyan, D and Makineni, SK and Santra, S (2024) Oxide growth characteristics, kinetics and mechanism of rutile formation on pure titanium. In: Vacuum, 219 .

Meka, Sai Rama Krishna and Agarwal, Vipul and Chatterjee, Kaushik (2019) In situ preparation of multicomponent polymer composite nanofibrous scaffolds with enhanced osteogenic and angiogenic activities. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 94 . pp. 565-579.

Meka, Sai Rama Krishna and Chacko, Leeba Ann and Ravi, Ashwini and Chatterjee, Kaushik and Ananthanarayanan, Vaishnavi (2017) Role of Microtubules in Osteogenic Differentiation of Mesenchymal Stem Cells on 3D Nanofibrous Scaffolds. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 3 (4). pp. 551-559.

Meka, Sai Rama Krishna and Jain, Shubham and Chatterjee, Kaushik (2016) Strontium eluting nanofibers augment stem cell osteogenesis for bone tissue regeneration. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 146 . pp. 649-656.

Meka, Sai Rama Krishna and Verma, Shailendra Kumar and Agarwal, Vipul and Chatterjee, Kaushik (2018) In Situ Silication of Polymer Nanofibers to Engineer Multi-Biofunctional Composites. In: CHEMISTRYSELECT, 3 (13). pp. 3762-3773.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Effect Of Directionality Of Grinding Marks On Friction And Formation Of Transfer Layer. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel., pp. 307-314.

Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Role of surface texture of harder surface on subsurface deformation. In: Wear, 266 (1-2). pp. 103-109.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.

Menezes, Pradeep L and Kailas, Satish V (2009) Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. In: Tribology Transactions, 52 (5). pp. 611-622.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2007) Response of Materials during sliding on various surface textures. In: ASME/STLE 2007 International Joint Tribology Conference (IJTC2007) , October 22–24, 2007, San Diego, California.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture. In: ASME/STLE International Joint Tribology Conference, OCT 24-26, 2011, Los Angeles, CA, USA, pp. 71-73.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation. In: Journal of Tribology, 133 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) SELF-ORGANIZATION AND FRICTION DURING SLIDING. In: PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE . pp. 273-275.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.

Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.

Menezes, Pradeep L and Kishore, Kishore and Kailas, Satish V and Lovell, Michael R (2015) Influence of Surface Texture and Roughness of Softer and Harder Counter Materials on Friction During Sliding. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 393-403.

Menezes, Pradeep L and Kishorea, * and Kailas, Satish V (2009) Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. In: Wear, 267 (9-10). pp. 1534-1549.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Menon, AV and Choudhury, B and Madras, G and Bose, S (2020) ‘Trigger-free’ self-healable electromagnetic shielding material assisted by co-doped graphene nanostructures. In: Chemical Engineering Journal, 382 .

Menon, AV and Jagadeshvaran, PL and Bose, S (2023) Geometry and mesh size control the EMI shielding in 3D printed conducting shape memory PU structures. In: Journal of Materials Chemistry C .

Menon, AV and Madras, G and Bose, S (2019) Light weight, ultrathin, and “thermally-clickable” self-healing MWNT patch as electromagnetic interference suppressor. In: Chemical Engineering Journal, 366 . pp. 72-82.

Menon, AV and Madras, G and Bose, S (2019) Mussel-Inspired Self-Healing Polyurethane with "Flower-like" Magnetic MoS2as Efficient Microwave Absorbers. In: ACS Applied Polymer Materials, 1 (9). pp. 2417-2429.

Menon, AV and Madras, G and Bose, S (2018) Ultrafast Self-Healable Interfaces in Polyurethane Nanocomposites Designed Using Diels-Alder "click" as an Efficient Microwave Absorber. In: ACS Omega, 3 (1). pp. 1137-1146.

Menon, AV and Sharma, D and Bose, S (2023) Nanoferrites for electromagnetic interference shielding application. [Book Chapter]

Menon, Aishwarya V and Madras, Giridhar and Bose, Suryasarathi (2017) Phase specific dispersion of functional nanoparticles in soft nanocomposites resulting in enhanced electromagnetic screening ability dominated by absorption. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 19 (1). pp. 467-479.

Menon, Aishwarya V and Madras, Giridhar and Bose, Suryasarathi (2018) Shape memory polyurethane nanocomposites with porous architectures for enhanced microwave shielding. In: CHEMICAL ENGINEERING JOURNAL, 352 . pp. 590-600.

Menon, Aishwarya V and Madras, Giridhar and Bose, Suryasarathi (2019) The journey of self-healing and shape memory polyurethanes from bench to translational research. In: POLYMER CHEMISTRY, 10 (32). pp. 4370-4388.

Meshram, A P and Punith Kumar, M K and Srivastava, C (2020) Enhancement in the corrosion resistance behaviour of amorphous Ni�P coatings by incorporation of graphene. In: Diamond and Related Materials, 105 .

Meshram, AP and Gupta, A and Srivastava, C (2022) Effect of electrodeposition temperature on texture, strain, grain boundary constitution and corrosion behavior of Ni-P coatings with low phosphorous content. In: Materialia, 22 .

Meshram, AP and Gupta, A and Srivastava, C (2022) Evolution of Texture, Grain Boundary Constitution, Strain, and Corrosion Behavior of Electrodeposited Ni–P Coatings as a Function of Deposition Current Density. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53 (4). pp. 1430-1439.

Meshram, AP and Kumar, MKP and Srivastava, C (2021) Enhancement in Anti-Corrosive Behavior of Ni-P Coatings by Incorporation of Carbon Nanotubes. In: Journal of Materials Engineering and Performance, 31 (2). pp. 1573-1584.

Meyers, Marc A and Andrade, Umberto R and Chokshi, Atul H (1995) The effect of grain size on the high-strain, high-strain-rate behavior of copper. In: Metallurgical and Materials Transactions A, 26 (11). pp. 2881-2893.

Miracle, DB and Ranganathan, S and Lord, EA (2007) Atomic size factor criterion in designing Bulk Metallic Glasses. In: Procs. Of Frontiers In The Design Of Materials, , 2007, Chennai, India.

Miracle, Daniel B and Lord, Eric A and Ranganathan, Srinivasa (2006) Candidate Atomic Cluster Configurations in Metallic Glass Structures. In: Materials Transactions, 47 (7). pp. 1737-1742.

Mirajkar, YRK and Natarajan, KA and Somasundaran, P (1997) Growth and attachment of Thiobacillus ferrooxidans during sulfide mineral leaching. In: International Journal Of Mineral Processing, 50 (3). pp. 203-210.

Mishra, A and Abebe, G and Jafo, G and Das Adhikary, G and De, A (2021) Effect of A-site off-stoichiometry on the microstructural, structural, and electromechanical properties of lead-free tetragonal 0.80Na0.5Bi0.5TiO3�0.20BaTiO3 (NBT�20BT) piezoceramic. In: Journal of Materials Science: Materials in Electronics, 32 (9). pp. 12578-12593.

Mishra, A and Khatua, DK and Das Adhikary, G and Kumar, N and Upadhyay, A and Mahale, B and Saha, S and Majumdar, B and Senyshyn, A and Ranjan, R (2021) Effect of sintering temperature on the structural disorder and its influence on electromechanical properties of the morphotropic phase boundary composition 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 (NBT-6BT). In: Journal of Materials Science: Materials in Electronics, 32 (12). pp. 16088-16103.

Mishra, AK and Lambai, A and Jayaram, V and Jaya, BN (2020) The edge-notched clamped beam bend specimen as a fracture toughness test geometry. In: Theoretical and Applied Fracture Mechanics, 105 .

Mishra, Anupam and Khatua, Dipak Kumar and De, Arnab and Majumdar, Bhaskar and Froemling, Till and Ranjan, Rajeev (2019) Structural mechanism behind piezoelectric enhancement in off-stoichiometric Na0.5Bi0.5TiO3 based lead-free piezoceramics. In: ACTA MATERIALIA, 164 . pp. 761-775.

Mishra, Anupam and Khatua, Dipak Kumar and De, Arnab and Ranjan, Rajeev (2019) Off-stoichiometry, structural-polar disorder and piezoelectricity enhancement in pre-MPB lead-free Na0.5Bi0.5TiO3-BaTiO3 piezoceramic. In: JOURNAL OF APPLIED PHYSICS, 125 (21).

Mishra, Anupam and Majumdar, Bhaskar and Ranjan, Rajeev (2017) A complex lead-free (Na, Bi, Ba)(Ti, Fe)O-3 single phase perovskite ceramic with a high energy-density and high discharge-efficiency for solid state capacitor applications. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 37 (6). pp. 2379-2384.

Mishra, Jitendra and Sahni, Sandeep and Sabat, Ramakrushna and Hiwarkar, Vijay Devidas and Sahoo, Santosh Kumar (2017) Effect of Cross-Rolling on Microstructure, Texture and Magnetic Properties of Non-Oriented Electrical Steels. In: MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 20 (1). pp. 218-224.

Mishra, Manish Kumar and Desiraju, Gautam R and Ramamurty, Upadrasta and Bond, Andrew D (2014) Studying Microstructure in Molecular Crystals With Nanoindentation: Intergrowth Polymorphism in Felodipine. In: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 53 (48). pp. 13102-13105.

Mishra, Manish Kumar and Mukherjee, Arijit and Ramamurty, Upadrasta and Desiraju, Gautam R (2015) Crystal chemistry and photomechanical behavior of 3,4-dimethoxycinnamic acid: correlation between maximum yield in the solid-state topochemical reaction and cooperative molecular motion. In: IUCrJ, 2 (6). pp. 653-660.

Mishra, Manish Kumar and Ramamurty, Upadrasta and Desiraju, Gautam R (2015) BIMODAL NANOINDENTATION RESPONSE OF THE (001) FACE IN CRYSTALLINE SODIUM SACCHARIN DIHYDRATE. In: MACEDONIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING, 34 (1). pp. 51-55.

Mishra, Manish Kumar and Ramamurty, Upadrasta and Desiraju, Gautam R (2015) Hardness Alternation in alpha,omega-Alkanedicarboxylic Acids. In: CHEMISTRY-AN ASIAN JOURNAL, 10 (10, SI). pp. 2176-2181.

Mishra, Manish Kumar and Ramamurty, Upadrasta and Desiraju, Gautam R (2016) Mechanical property design of molecular solids. In: CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 20 (6, SI). pp. 361-370.

Mishra, Manish Kumar and Sanphui, Palash and Ramamurty, Upadrasta and Desiraju, Gautam R (2014) Solubility-Hardness Correlation in Molecular Crystals: Curcumin and Sulfathiazole Polymorphs. In: CRYSTAL GROWTH & DESIGN, 14 (6). pp. 3054-3061.

Mishra, Manish Kumar and Varughese, Sunil and Ramamurty, Upadrasta and Desiraju, Gautam R (2013) Odd-even effect in the elastic modulii of alpha,omega-Alkanedicarboxylic acids. In: Journal of the American Chemical Society, 135 (22). pp. 8121-8124.

Mishra, NS and Ranganathan, S (1995) Electron microscopy and diffraction of ordering in Ni---W alloys. In: Acta Metallurgica et Materialia, 43 (6). pp. 2287-2302.

Mishra, NS and Ranganathan, S (1992) Electron microscopy and diffraction of ordering in an off-stoichiometric Ni---W alloy. In: Scripta Metallurgica et Materialia, 27 (10). pp. 1337-1342.

Mishra, R K and Prajapati, C S and Shahi, R R and Kushwaha, A K and Sahay, P P (2018) Influence of electrodeposition modes on the electrochemical performance of MnO2 films prepared using anionic MnO4- (Mn7+) precursor. In: CERAMICS INTERNATIONAL, 44 (5). pp. 5710-5718.

Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a $ZrO_{2}-Al_{2}O_{3}$ nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.

Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a ZrO2–Al2O3 nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.

Mishra, S and Maware, PP and Choyal, V and Kundalwal, SI (2023) Atomistic insights into the fracture mechanisms of Stone–Wales-defected CNTs under transversely isotropic loading. In: European Physical Journal Plus, 138 (5).

Mishra, S and Suresh, M and More, AM and Bisht, A and Nayan, N and Suwas, S (2021) Texture control to reduce yield strength anisotropy in the third generation aluminum-copper-lithium alloy: Experiments and modeling. In: Materials Science and Engineering A, 799 .

Mishra, S and Yazar, KU and Kar, A and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (1). pp. 151-166.

Mishra, Saswat and Katti, Prajakta and Kumar, S and Bose, Suryasarathi (2019) Macroporous epoxy-carbon fiber structures with a sacrificial 3D printed polymeric mesh suppresses electromagnetic radiation. In: CHEMICAL ENGINEERING JOURNAL, 357 . pp. 384-394.

Mishra, Sumeet and Beura, Vikrant Kumar and Singh, Amit and Yadava, Manasij and Nayan, Niraj (2018) Effect of Temper Condition on Stress Relaxation Behavior of an Aluminum Copper Lithium Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 2631-2643.

Mishra, Sumeet R and Ranjith, K and Swathi, SK and Ramamurthy, Praveen C (2012) Nanostructured barbed wire architecturing of organic conducting material blends by electrospinning. In: Applied Physics Letters, 100 (1). 013302-1-013302-4.

Mishra, Tara Prasad and Koyano, Mikio and Oshima, Yoshifumi (2017) Detection of large thermal vibration for Cu atoms in tetrahedrite by high-angle annular dark-field imaging. In: APPLIED PHYSICS EXPRESS, 10 (4).

Misra, Abha and Kumar, Praveen (2013) Periodic architecture for high performance shock absorbing composites. In: Scientific Reports, 3 . 2056_1-2056_.

Misra, Abha and Kumar, Praveen (2014) Tailoring viscoelastic response of carbon nanotubes cellular structure using electric field. In: NANOSCALE, 6 (22). pp. 13668-13677.

Misra, RDK and Jacob, KT and Nandy, TK and Saha, RL (1989) Evaluation of the reactivity of titanium with mould materials during casting. In: Bulletin of Materials Science, 12 (5). pp. 481-493.

Mittal, Ayush and Albertsson, Galina Jelkina and Gupta, Govind Sharan and Seetharaman, Seshadri and Subramanian, Sankaran (2014) Some Thermodynamic Aspects of the Oxides of Chromium. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 45 (2). pp. 338-344.

Modak, JM and Vasan, SS and Natarajan, KA (1999) Calcium removal from bauxite using Paenibacillus polymyxa. In: Minerals & Metallurgical Processing, 16 (4). pp. 6-12.

Modak, JM and Natarajan, KA and Saha, B (1996) Biosorption of copper and zinc using waste Aspergillus niger biomass. In: Minerals and Metallurgical Processing, 13 (2). pp. 52-57.

Modak, Jayant M and Natarajan, KA and Mukhopadhyay, Sanghamitra (1996) Development of temperature-tolerant strains of Thiobacillus ferrooxidans to improve bioleaching kinetics. In: Hydrometallurgy, 42 (01). pp. 51-61.

Mohamed, Reda M and Mishra, Manish Kumar and Al-Harbi, Laila M and Al-Ghamdi, Mohammed S and Asiri, Abdullah M and Reddy, Chilla Malla and Ramamurty, Upadrasta (2015) Temperature Dependence of Mechanical Properties in Molecular Crystals. In: CRYSTAL GROWTH & DESIGN, 15 (5). pp. 2474-2479.

Mohamed, Reda M and Mishra, Manish Kumar and Al-Harbi, Laila M and Al-Ghamdi, Mohammed S and Ramamurty, Upadrasta (2015) Anisotropy in the mechanical properties of organic crystals: temperature dependence. In: RSC ADVANCES, 5 (79). pp. 64156-64162.

Mohammad, Ashfaq and Al-Ahmari, Abdulrahman M and Balla, Vamsi Krishna and Das, Mitun and Datta, Susmit and Yadav, Devinder and Ram, G D Janaki (2017) In vitro wear, corrosion and biocompatibility of electron beam melted gamma-TiAl. In: MATERIALS & DESIGN, 133 . pp. 186-194.

Mohan, Rengarajan and Kishore, * (1985) Jute-Glass Sandwich Composites. In: Journal of Reinforced Plastics and Composites, 4 (2). pp. 186-194.

Mohan, A and Anil, AG and Ramamurthy, PC and Menon, R (2022) Charge transport in cross-linked PEDOT:PSS near metal-insulator transition. In: Journal of Applied Physics, 131 (15).

Mohan, M and Singh, S and Kumar, K and Pandel, U (2024) Influence of Heat Treatment on Microstructural, Corrosion and Tribological Behaviour of Electrodeposited AlCoFeMnNiCu High Entropy Alloy Coatings. In: Journal of The Institution of Engineers (India): Series D .

Mohan, M and Singh, S and Pandel, U and Kumar, K (2024) Effect on Morphology and Corrosion Behavior of AlCrFeCoNi High-Entropy Alloy Coatings Prepared by Electroless Process on Mild Steel Substrate. [Book Chapter]

Mohan, M and Singh, S and Pandel, U and Kumar, K (2024) Microstructural Features, Corrosion and Wear Behavior of the AlCrFeCoNiCu High-Entropy Alloy, Electrodeposited Coatings, and Subsequent Heat Treatment. In: Journal of Materials Engineering and Performance .

Mohan, M and Singh, S and Pandel, U and Kumar, K and Srivastava, C (2024) Optimization of surface oxide chemistry for enhanced corrosion resistance of AlMnFeCoNi � Carbon nanotube composite coatings. In: Journal of Alloys and Compounds, 1003 .

Mohan, R and Kishore, * and Shridhar, MK and Rao, RMVGK (1982) Compressive strength of jute-glass hybrid fibre composites. In: Journal of Materials Science Letters, 2 (3). pp. 99-102.

Mohan Kumar, G and Srivastava, C (2023) On the Use of Surfactant Polarity for Grain Boundary Engineering in Electrodeposited Cobalt Coatings and Its Direct Effect on the Coating Corrosion Behavior. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Mohanta, Z and Gaonkar, SK and Kumar, M and Saini, J and Tiwari, V and Srivastava, C and Atreya, HS (2020) Influence of Oxidation Degree of Graphene Oxide on Its Nuclear Relaxivity and Contrast in MRI. In: ACS Omega . (In Press)

Mohanta, Zinia and Atreya, Hanudatta S and Srivastava, Chandan (2018) Correlation between defect density in mechanically milled graphite and total oxygen content of graphene oxide produced from oxidizing the milled graphite. In: SCIENTIFIC REPORTS, 8 .

Mohanty, Bani P and Subramanian, S and Hajra, JP (1986) Electro slag refining of commercial aluminum. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 646-647.

Mohanty, S and Gurao, N P and Padaikathan, P and Biswas, Krishanu (2017) Ageing behaviour of equiatomic consolidated Al20Co20Cu20Ni20Zn20 high entropy alloy. In: MATERIALS CHARACTERIZATION, 129 . pp. 127-134.

Mohanty, S and Kothari, A and Raghavan, R and Sahu, VK and Gurao, NP and Sahu, KK and Dhindaw, BK and Zeng, L and Xia, M and Gollapudi, S (2022) Microstructure and Mechanical Properties of High-Carbon-Containing Fe-Ni-Mn-Al-Cr High-Entropy Alloy: Effect of Thermomechanical Treatment. In: Frontiers in Materials, 9 .

Mohanty, S and Maity, TN and Mukhopadhyay, S and Sarkar, S and Gurao, NP and Bhowmick, S and Biswas, Krishanu (2017) Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: Microstructure and mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 679 . pp. 299-313.

Mohanty, S and Samal, S and Tazuddin, A and Tiwary, CS and Gurao, NP and Biswas, K (2015) Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20 high entropy alloy. In: MATERIALS SCIENCE AND TECHNOLOGY, 31 (10). pp. 1214-1222.

Mohapatra, OP and Jacob, KT and Alcock, CB (1973) Solubilities of Pb+2, Bi+3, Sb+3 and Cu+1 sulphides in (NaCl KCl Na2S) melts. In: Metallurgical and Materials Transactions B, 4 (7). pp. 1755-1762.

Mojamdar, Vinci and Gupta, Govind Sharan and Puthukkudi, Agin (2018) Raceway Formation in a Moving Bed. In: ISIJ INTERNATIONAL, 58 (8). pp. 1396-1401.

Molinari, Alan and Leufke, Philipp M and Reitz, Christian and Dasgupta, Subho and Witte, Ralf and Kruk, Robert and Hahn, Horst (2017) Hybrid supercapacitors for reversible control of magnetism. In: NATURE COMMUNICATIONS, 8 .

Mondal, AK and Kumar, Sanjeev (2010) Creep Behaviour of AE42 Magnesium Alloy and Its Composites Using Impression Creep Technique. In: 6th International Conference on Processing and Manufacturing of Advanced Materials, AUG 25-29, 2009, Berlin, pp. 1552-1557.

Mondal, A and Fechner, D and Kumar, S and Dieringa, H and Maier, P and Kainer, KU (2010) Interrupted creep behaviour of Mg alloys developed for powertrain applications. In: Materials Science and Engineering A, 527 (9). pp. 2289-2296.

Mondal, A and Prashanth, LA and Bhatnagar, S (2024) Truncated Cauchy random perturbations for smoothed functional-based stochastic optimization. In: Automatica, 162 .

Mondal, A and Saha, P and Ghosh, B and Sahu, M and Mukherjee, GD and Ranjan, R and Brajesh, K (2020) High-pressure structural investigation on lead-free piezoelectric 0.5Ba(Ti0.8Zr0.2)O3Â -Â 0.5(Ba0.7Ca0.3)TiO3. In: Journal of the American Ceramic Society, 103 (9). pp. 5259-5269.

Mondal, AK and Blawert, C and Kumar, S (2015) Corrosion behaviour of creep-resistant AE42 magnesium alloy-based hybrid composites developed for powertrain applications. In: MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 66 (10). pp. 1150-1158.

Mondal, AK and Kesavan, Arjun Rajiv and Reddy, Ravi Kiran B and Dieringa, Hajo and Kumar, S (2015) Correlation of microstructure and creep behaviour of MRI230D Mg alloy developed by two different casting technologies. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631 . pp. 45-51.

Mondal, AK and Kumar, S (2009) Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction. In: 17th International Conference on Wear of Materials, JUN 15 2009, Las Vegas, pp. 458-466.

Mondal, AK and Kumar, S (2009) Impression creep behaviour of magnesium alloy-based hybrid composites in the transverse direction. In: Composites Science and Technology, 69 (10, Sp). pp. 1592-1598.

Mondal, Ashok Kumar and Rao, Chandra BSS and Kumar, Subodh (2007) Wear behaviour of AE42+20% saffil Mg-MMC. In: Tribology International, 40 (2). pp. 290-296.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part I. evolution of microstructure and texture. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2746-2763.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part II. mechanical properties anisotropy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2764-2777.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2011) Formation of a single, rotated-Brass (1 1 0)< 5 5 6 > texture by hot cross-rolling of an Al-Zn-Mg-Cu-Zr alloy. In: Scripta Materialia, 64 (5). pp. 446-449.

Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets. In: Materials Science and Engineering: A, 577 . pp. 87-100.

Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS (2010) Enhancement in Bath Mixing and Plume area in a New Degassing Process - A Computational Fluid Dynamic Study. In: Archives of Metallurgy and Materials, 55 (4). pp. 1131-1135.

Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS and Nogami, H and Shibata, H (2012) Study of Fluid Flow and Mixing Behaviour of a Vacuum Degasser. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (3). pp. 321-331.

Mondal, Manisha and Rai, Vineet Kumar and Srivastava, Chandan (2017) Influence of silica surface coating on optical properties of Er3+-Yb3+: YMoO4 upconverting nanoparticles. In: CHEMICAL ENGINEERING JOURNAL, 327 . pp. 838-848.

Mondal, Manisha and Rai, Vineet Kumar and Srivastava, Chandan and Sarkar, Suman and Akash, R (2016) Enhanced frequency upconversion in Ho3+/Yb3+/Li+:YMoO4 nanophosphors for photonic and security ink applications. In: JOURNAL OF APPLIED PHYSICS, 120 (23).

Mondal, P and Chakraborty, I and Chatterjee, K (2022) Injectable Adhesive Hydrogels for Soft tissue Reconstruction: A Materials Chemistry Perspective. In: Chemical Record .

Mondal, P and Chatterjee, K (2022) Injectable and self-healing double network polysaccharide hydrogel as a minimally-invasive delivery platform. In: Carbohydrate Polymers, 291 .

Mondal, Pradip Kumar and Kiran, M S R N and Ramamurty, U and Chopra, Deepak (2017) Quantitative Investigation of the Structural, Thermal, and Mechanical Properties of Polymorphs of a Fluorinated Amide. In: CHEMISTRY-A EUROPEAN JOURNAL, 23 (5). pp. 1023-1027.

Mondal, S and Bansal, U and Makineni, SK (2022) On the fabrication of atom probe tomography specimens of Al alloys at room temperature using focused ion beam milling with liquid Ga ion source. In: Microscopy Research and Technique .

Mondal, S and Gupta, GS (2008) Fluid dynamics study of a new vacuum degassing process. In: CHEMECA-08, Sept. 27-30, New Castle, Australia.

Mondal, S and Punetha, P and De, BK and Adhikary, GD and Ranjan, R and Nukala, P (2024) Giant electrostriction in bulk RE (III) substituted CeO2: Effect of RE-VO�� interaction and RE concentration. In: Scripta Materialia, 248 .

Mondal, S and Raghavendra, KG and Panigrahi, A and Nayan, N and Makineni, SK and Suwas, S (2024) Effect of Sc addition on evolution of microstructure, texture and strength of high-pressure torsion-processed AA2195 Al�Li alloy. In: Journal of Materials Science, 59 (14). pp. 5717-5735.

Mondal, SK and Biswas, A and Pradhan, JR and Dasgupta, S (2021) Inkjet-Printed MoS2 Transistors with Predominantly Intraflake Transport. In: Small Methods, 5 (12).

Mondal, SK and Dasgupta, S (2022) Inkjet-printed WS2 and MoSe2 transistors with edge-FET architecture and near-vertical electronic transport. In: 2022 IEEE International Conference on Emerging Electronics, 11 -14 Dec 2022, Bangalore, India.

Mondal, SK and Devabharathi, N and Dasgupta, S (2019) Effect of semiconductor surface homogeneity and interface quality on electrical performance of inkjet-printed oxide field-effect transistors. In: Nanotechnology, 30 (43).

Mondal, SK and Prakasan, L and Kolluru, N and Pradhan, JR and Dasgupta, S (2024) Inkjet-Printed, High-Performance MoS2 Transistors and Unipolar Logic Electronics. In: ACS Applied Materials and Interfaces, 16 . 42392 -42405.

Mondol, S and Alam, T and Banerjee, R and Kumar, S and Chattopadhyay, K (2017) Development of a high temperature high strength Al alloy by addition of small amounts of Sc and Mg to 2219 alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 687 . pp. 221-231.

Mondol, S and Bansal, U and Dhanalakshmi, P and Makineni, SK and Mandal, A and Chattopadhyay, K (2022) Enhancement of high temperature strength of Al-Cu alloys by minor alloying and hot working process. In: Journal of Alloys and Compounds, 921 .

Mondol, S and Bansal, U and Singh, MP and Dixit, S and Mandal, A and Paul, A and Chattopadhyay, K (2022) Microstructure-strength correlations in Al-Si-Cu alloys micro-alloyed with Zr. In: Materialia, 23 .

Mondol, S and Kashyap, S and Kumar, S and Chattopadhyay, K (2018) Improvement of high temperature strength of 2219 alloy by Sc and Zr addition through a novel three-stage heat treatment route. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 732 . pp. 157-166.

Mondol, S and Kumar, S and Chattopadhyay, K (2019) Effect of thermo-mechanical treatment on microstructure and tensile properties of 2219ScMg alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 759 . pp. 583-593.

Mondol, S and Makineni, S K and Kumar, S and Chattopadhyay, K (2018) Enhancement of High Temperature Strength of 2219 Alloys Through Small Additions of Nb and Zr and a Novel Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 3047-3057.

Monisha, K and Shariff, SM and Raju, R and Manonmani, J and Jayaraman, S (2022) Titanium boride and titanium silicide phase formation by high power diode laser alloying of B4C and SiC particles with Ti: Microstructure, hardness and wear studies. In: Materials Today Communications, 31 .

Monisha, K and Shariff, SM and Sekar, A and Raju, R and Manonmani, J and Senthilselvan, J (2024) Titanium boride coating by high power diode laser alloying of amorphous boron with titanium and its surface property investigations. In: Optics and Laser Technology, 170 .

More, AM and Kalsar, R and Shivashankar, P and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Incremental Forming of the Al-Li Alloy AA2195: Role of Texture and Microstructure. In: JOM, 72 (4). pp. 1647-1655.

Mridha, S and Choudhury, A and Subramanian, K (2023) Effect of grain-boundary character on segregation of vacancies: Thermodynamic aspects. In: Physical Review Materials, 7 (11).

Mudakavi, Rajeev J and Raichur, Ashok M and Chakravortty, Dipshikha (2014) Lipid coated mesoporous silica nanoparticles as an oral delivery system for targeting and treatment of intravacuolar Salmonella infections. In: RSC ADVANCES, 4 (105). pp. 61160-61166.

Mudakavi, Rajeev J and Vanamali, Surya and Chakravortty, Dipshikha and Raichur, Ashok M (2017) Development of arginine based nanocarriers for targeting and treatment of intracellular Salmonella. In: RSC ADVANCES, 7 (12). pp. 7022-7032.

Mukherjee, A and Debnath, S and Bhowmik, A and Biswas, S (2023) DNA interactive property of poly-L-lysine induces apoptosis in MCF-7 cells through DNA interaction. In: Journal of Biochemical and Molecular Toxicology .

Mukherjee, A and Raichur, AM and Modak, JM and Natarajan, KA (2003) Bio-processing of Indian Ocean nodules using a marine isolate-effect of organics. In: Minerals Engineering, 16 (7). pp. 651-657.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M (2005) Dissolution studies on $TiO_{2}$ with organics. In: Chemosphere, 61 (4). pp. 585-588.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Bioprocessing of polymetallic Indian Ocean nodules lusing a marine isolate. In: Hydrometallurgy, 73 (3-4). pp. 205-213.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Bioprocessing of polymetallic Indian Ocean nodules using a marine isolate. In: Hydrometallurgy, 73 (3-4). pp. 205-213.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Exploring process options to enhance metal dissolution in bioleaching of Indian Ocean nodules. In: Journal of Chemical Technology & Biotechnology, 79 (5). pp. 512-517.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Mechanisms for solubilization of cobalt, copper and nickel from Indian Ocean nodules at near neutral pH by a marine isolate. In: Journal of Industrial Microbiology and Biotechnology, 31 (10). pp. 462-468.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2004) Mechanisms for solubilization of cobalt,copper and nickel from Indian Ocean nodules at near neutral pH by a marine isolate. In: Journal of Industrial Microbiology and Biotechnology, 31 (10). pp. 462-468.

Mukherjee, Amitava and Raichur, Ashok M and Modak, Jayant M and Natarajan, KA (2003) Solubilization of cobalt from ocean nodules at neutral pH—a novel bioprocess. In: Journal of Industrial Microbiology and Biotechnology, 30 (10). pp. 606-612.

Mukherjee, Amitava and Raichur, Ashok M and Natarajan, KA and Modak, Jayant M (2004) Recent Developments in Processing Ocean Manganese Nodules-A Critical Review. In: Mineral Processing and Extractive Metallurgy Review, 25 (2). pp. 91-127.

Mukherjee, Amitava and Raichura, Ashok M and Modak, Jayant M and Natarajan, KA (2005) Dissolution of Cu, Co and Ni from ocean nodules by L-ascorbic acid. In: Chemical Engineering and Processing, 44 (7). pp. 754-759.

Mukherjee, Anwesha and Jaidev, Leela R and Chatterjee, Kaushik and Misra, Abha (2019) Modified fermi level in strontium nanoparticles decorated reduced graphene oxide for wide concentration detection of nitrogen dioxide at room temperature. In: MATERIALS RESEARCH EXPRESS, 6 (6).

Mukherjee, I and Das, P (2023) A Molecular Dynamics Study of Nucleation and Grain Growth of Novel Al-15Mg2Si-4.5Si Composite During Rapid Cooling Based Semi Solid Slurry Preparation. [Book Chapter]

Mukherjee, I and Das, P (2023) A molecular dynamics study of sintering of micro injection moulded alumina nano particles. In: Philosophical Magazine .

Mukherjee, M and Kolluri, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2009) Strain hardening during constrained deformation of metal foams - Effect of shear displacement. In: Scripta Materialia, 61 (7). pp. 752-755.

Mukherjee, M and Lahiri, AK (2005) Three-phase contact line profile between a large air bubble and a flat solid surface. In: Journal of Colloid and Interface Science, 291 (2). pp. 593-596.

Mukherjee, M and Ramamurty, U and Garcia-Moreno, F and Banhart, J (2010) The effect of cooling rate on the structure and properties of closed-cell aluminium foams. In: Acta Materialia, 58 (15). pp. 5031-5042.

Mukherjee, R and Abinandanan, TA (2022) Grain boundary grooving in a polycrystalline thin film: A phase-field study. In: Computational Materials Science, 203 .

Mukherjee, R and Abinandanan, TA and Gururajan, MP (2009) Phase field study of precipitate growth: Effect of misfit strain and interface curvature. In: ACTA Materialia, 57 (13). pp. 3947-3954.

Mukherjee, R and Abinandanan, TA and Gururajan, MP (2010) Precipitate growth with composition-dependent diffusivity: Comparison between theory and phase field simulations. In: Scripta Materialia, 62 (2). pp. 85-88.

Mukherjee, R and Srivastava, P and Singh, P and Bhardwaj, S and Saha, A and Viswanathan, VN and Ramamurthy, PC and Avasthi, S (2022) D-A-D Structured Polymer Interlayer for Higher Open-Circuit Voltage and Stability in MAPbI3 Perovskite Solar Cells. In: Journal of Electronic Materials .

Mukherjee, Rajdip and Bhowmick, Somnath (2011) Edge Stabilities of Hexagonal Boron Nitride Nanoribbons: A First-Principles Study. In: Journal of Chemical Theory and Computation, 7 (3). pp. 720-724.

Mukherjee, S and Chetty, R and Madduri, PVP and Nayak, AK and Wojciechowski, K and Ghosh, T and Chattopadhyay, K and Suwas, S and Mallik, RC (2020) Reply to the ‘Comment on “Investigation on the structure and thermoelectric properties of CuxTe binary compounds”’ by A. H. Barajas-Aguilar, A. M. Garay-Tapia, and S. J. Jiménez-Sandoval,Dalton Trans., 2020, 49, DOI: 10.1039/C9DT03607E. In: Dalton Transactions, 49 (17). pp. 5738-5740.

Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.

Mukherjee, S and Parasuraman, R and Umarji, AM and Rogl, G and Rogl, P and Chattopadhyay, K (2020) Effect of Fe alloying on the thermoelectric performance of Cu2Te. In: Journal of Alloys and Compounds, 817 .

Mukherjee, S and Ramakrishnan, A and Chen, K-H and Chattopadhyay, K and Suwas, S and Mallik, RC (2018) Tuning the thermoelectric properties of chalcopyrite by Co and Se double substitution. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.

Mukherjee, Shriparna and Chetty, Raju and Madduri, Prakash PV and Nayak, Ajaya K and Wojciechowski, Krzysztof and Ghosh, Tanmoy and Chattopadhyay, Kamanio and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Investigation on the structure and thermoelectric properties of CuxTe binary compounds. In: DALTON TRANSACTIONS, 48 (3). pp. 1040-1050.

Mukhokosi, Emma P and Roul, Basanta and Krupanidhi, Saluru B and Nanda, Karuna K (2019) Toward a Fast and Highly Responsive SnSe2-Based Photodiode by Exploiting the Mobility of the Counter Semiconductor. In: ACS APPLIED MATERIALS & INTERFACES, 11 (6). pp. 6184-6194.

Mukhopadhyay, NK and Ranganathan, S and Chattopadhyay, K (1989) Evolution of superlattice order in Al-Mn quasicrystals and its relation to face-centred icosahedral quasicrystals. In: Philosophical Magazine Letters, 60 (5). pp. 207-211.

Mukhopadhyay, NK and Ranganathan, S and Chattopadhyay, K (1987) On the short-range order in Al-Mn quasicrystals during low-temperature ageing. In: Philosophical Magazine Letters, 56 (4). pp. 121-127.

Mukhopadhyay, NK and Thangaraj, N and Chattopadhyay, K and Ranganathan, S (1987) A comparative electron microscopic study of Al-based and Mg-based quasicrystals. In: Journal of Materials Research, 2 (3). pp. 299-304.

Mukhopadhyay, A and Rajput, M and Barui, A and Chatterjee, SS and Pal, NK and Chatterjee, J and Mukherjee, R (2020) Dual cross-linked honey coupled 3D antimicrobial alginate hydrogels for cutaneous wound healing. In: Materials Science and Engineering C, 116 .

Mukhopadhyay, NK and Chattopadhay, K and Ranganathan, S (1996) Ordering transformation in icosahedral quasicrystals and related crystalline phases. In: Bulletin of Materials Science, 19 (05). pp. 717-723.

Mukhopadhyay, NK and Chattopadhyay, K and Ranganathan, S (1989) Synthesis and structural aspects of quasicrystals in Mg-Al-Ag system: Mg4Al6Ag. In: Metallurgical Transactions. Physical Metallurgy and Material, 20 (5). pp. 805-812.

Mukhopadhyay, NK and Ishihara, KN and Ranganathan, S and Chattopadhyay, K (1991) Rational Approximant Structures and Phason Strain in Icosahedral Quasicrystalline Phases. In: Acta Metallurgica et Materialia, 39 (6). pp. 1151-1159.

Mukhopadhyay, NK and Lord, EA (2002) Least path criterion (LPC) for unique indexing in a two-dimensional decagonal quasilattice. In: Acta Crystallographica Section A, 58 (part 5). pp. 424-428.

Mukhopadhyay, NK and Subbanna, GN and Ranganathan, S and Chattopadhyay, K (1986) An electron microscopic study of quasicrystals in a quaternary alloy : Mg32(Al, Zn, Cu)49. In: Scripta Metallurgica, 20 (4). pp. 525-528.

Mukhopadhyay, P and Biswas, S and Chokshi, AH (2009) Deformation characterization of superplastic AA7475 alloy. In: Transactions of the Indian Institute of Metals, 62 (2). pp. 149-152.

Mukhopadhyay, S and Jacob, KT (1995) Tie lines and activities in the system NiO-MgO-SiO2 at 1373 K. In: Journal of Phase Equilibria, 16 (3). 243-253 .

Mukhopadhyay, S and Pandey, P and Baler, N and Biswas, K and Makineni, SK and Chattopadhyay, K (2021) The role of Ti addition on the evolution and stability of γ/γ� microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy. In: Acta Materialia, 208 .

Mukhopadhyay, Sanghamitra and Natarajan, KA (1995) Growth and development of Thiobacillus ferrooxidans for engineering applications. In: Sadhana : Academy Proceedings in Engineering Sciences, 20 (part 5). 851-869 .

Mukhopadhyay, Sukanya and Jacob, KT (1995) Design of solid electrolytes for use with dissimilar gas electrodes. In: Journal of Electroanalytical Chemistry, 395 (1-2). pp. 107-115.

Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the System $NiO-CaO-SiO_2$ and Gibbs Energy of Formation of $CaNiSi_2O_6$. In: Metallurgical and Materials Transactions A, 26A (9). pp. 2311-2315.

Mukhopadhyay, Sukanya and Jacob, KT (1996) Phase equilibria in the system CaO-CoO-SiO2 and Gibbs energies of formation of the quaternary oxides CaCoSi2O6, Ca2CoSi2O7, and CaCoSiO4. In: American Mineralogist, 81 (7-8). 963-972 .

Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the system NiO-CaO-SiO2 and Gibbs energy of formation of CaNiSi2O6. In: Metallurgical and Materials Transactions A, 26 (9). pp. 2311-2315.

Mukhopadhyay, Sukanya and Jacob, KT (1995) Theoretical Analysis of the Electromotive Force of a Cell Incorporating a Composition Gradient Solid Electrolyte. In: Journal of the Electrochemical Society, 142 (1). pp. 161-165.

Mukhopadhyay, Sukanya and Jacob, KT (1993) Thermodynamic Study of Mixed Anionic Solid Solutions Using Gradient Solid Electrolytes System K2CO3 - K2SO4. In: Journal of the Electrochemical Society, 140 (9). pp. 2629-2635.

Mulley, NK and Gupta, GS (2008) Study of fluid dynamics in a packed bed in the presence of fines and liquid flow. In: Int. Conf. on Recent Progress on Mathematical Modelling in Ironmaking-2008, Tokyo, Japan, Oct. 16-17, 2008, p50-55, Oct. 16-17, 2008, Tokyo, Japan.

Mundotiya, Brij Mohan and Srivastavaz, Chandan (2012) Ag-Ni Nanoparticles: Synthesis and Phase Stability. In: Electrochemical and Solid-State Letters, 15 (5). K41-K44.

Munganyinka, JP and Habinshuti, JB and Ndayishimiye, JC and Mweene, L and Ofori-Sarpong, G and Mishra, B and Adetunji, AR and Tanvar, H (2022) Potential Uses of Artisanal Gold Mine Tailings, with an Emphasis on the Role of Centrifugal Separation Technique. In: Sustainability (Switzerland), 14 (13).

Mungole, Tarang and Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2015) The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility. In: JOURNAL OF MATERIALS SCIENCE, 50 (10). pp. 3549-3561.

Mungole, Tarang and Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2014) A critical examination of the paradox of strength and ductility in ultrafine-grained metals. In: JOURNAL OF MATERIALS RESEARCH, 29 (21). pp. 2534-2546.

Mungole, Tarang and Nadammal, Naresh and Dawra, Kunal and Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2013) Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion. In: Journal of Materials Science, 48 (13). pp. 4671-4680.

Munjal, ML (2015) Environmental noise control. In: CURRENT SCIENCE, 109 (1). pp. 7-8.

Mural, PKS and Madras, G and Bose, S (2018) Polymeric membranes derived from immiscible blends with hierarchical porous structures, tailored bio-interfaces and enhanced flux: Potential and key challenges. In: Nano-Structures and Nano-Objects, 14 . pp. 149-165.

Mural, Prasanna Kumar S and Banerjee, Aditi and Rana, Manish Singh and Shukla, Abhinaya and Padmanabhan, Babu and Bhadra, Sambhu and Madras, Giridhar and Bose, Suryasarathi (2014) Polyolefin based antibacterial membranes derived from PE/PEO blends compatibilized with amine terminated graphene oxide and maleated PE. In: JOURNAL OF MATERIALS CHEMISTRY A, 2 (41). pp. 17635-17648.

Mural, Prasanna Kumar S and Banerjee, Aditi and Rana, Manish Singh and Shukla, Abhinaya and Padmanabhan, Babu and Bhadra, Sambhu and Madras, Giridhar and Bose, Suryasarathi (2014) Polyolefin based antibacterial membranes derived from PE/PEO blends compatibilized with amine terminated graphene oxide and maleated PE. In: JOURNAL OF MATERIALS CHEMISTRY A, 2 (41). pp. 17635-17648.

Mural, Prasanna Kumar S and Jain, Shubham and Kumar, Sachin and Madras, Giridhar and Bose, Suryasarathi (2016) Unimpeded permeation of water through biocidal graphene oxide sheets anchored on to 3D porous polyolefinic membranes. In: NANOSCALE, 8 (15). pp. 8048-8057.

Mural, Prasanna Kumar S and Jain, Shubham and Madras, Giridhar and Bose, Suryasarathi (2017) Antibacterial Membranes for Water Remediation with Controlled Leaching of Biocidal Silver Aided by Prior Grafting of Poly(ethylene imine) on to Ozone-Treated Polyethylene. In: CHEMISTRYSELECT, 2 (2). pp. 624-631.

Mural, Prasanna Kumar S and Jain, Shubham and Madras, Giridhar and Bose, Suryasarathi (2016) Improving antifouling ability by site-specific silver decoration on polyethylene ionomer membranes for water remediation: assessed using 3D micro computed tomography, water flux and antibacterial studies. In: RSC ADVANCES, 6 (91). pp. 88057-88065.

Mural, Prasanna Kumar S and Kumar, Banothu and Madras, Giridhar and Bose, Suryasarathi (2016) Chitosan Immobilized Porous Polyolefin As Sustainable and Efficient Antibacterial Membranes. In: ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 4 (3). pp. 862-870.

Mural, Prasanna Kumar S and Madras, Giridhar and Bose, Suryasarathi (2014) Positive temperature coefficient and structural relaxations in selectively localized MWNTs in PE/PEO blends. In: RSC ADVANCES, 4 (10). pp. 4943-4954.

Mural, Prasanna Kumar S and Pawar, Shital Patangrao and Jayanthi, Swetha and Madras, Giridhar and Sood, Ajay K and Bose, Suryasarathi (2015) Engineering Nanostructures by Decorating Magnetic Nanoparticles onto Graphene Oxide Sheets to Shield Electromagnetic Radiations. In: ACS APPLIED MATERIALS & INTERFACES, 7 (30). pp. 16266-16278.

Mural, Prasanna Kumar S and Rana, Manish Singh and Madras, Giridhar and Bose, Suryasarathi (2014) PE/PEO blends compatibilized by PE brush immobilized on MWNTs: improved interfacial and structural properties. In: RSC ADVANCES, 4 (31). pp. 16250-16259.

Mural, Prasanna Kumar S and Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2015) A critical review on in situ reduction of graphene oxide during preparation of conducting polymeric nanocomposites. In: RSC ADVANCES, 5 (41). pp. 32078-32087.

Mural, Prasanna Kumar S and Sharma, Maya and Shukla, Abhinaya and Bhadra, Sambhu and Padmanabhan, Babu and Madras, Giridhar and Bose, Suryasarathi (2015) Porous membranes designed from bi-phasic polymeric blends containing silver decorated reduced graphene oxide synthesized via a facile one-pot approach. In: RSC ADVANCES, 5 (41). pp. 32441-32451.

Murali, Banavoth and Parui, Jayanta and Madhuri, M and Krupanidhi, SB (2015) An insight to the low temperature conduction mechanism of c-axis grown Al-doped ZnO, a widely used transparent conducting oxide. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 48 (1).

Murali, MG and Dalimba, Udaya Kumar (2014) Design and synthesis of new low band gap organic semiconductors for photovoltaic applications. In: Annual Conference on Oxide-Based Materials and Devices V held at SPIE Photonics West, FEB 02-05, 2014, San Francisco, CA.

Murali, MG and Rao, Arun D and Ramamurthy, Praveen C (2014) New low band gap 2-(4-(trifluoromethyl)phenyl)-1H-benzod]imidazole and benzo1,2-c; 4,5-c `]bis1,2,5]thiadiazole based conjugated polymers for organic photovoltaics. In: RSC ADVANCES, 4 (85). pp. 44902-44910.

Murali, MG and Vishnumurthy, KA and Seethamraju, Sindhu and Ramamurthy, Praveen C (2014) Colorimetric anion sensor based on receptor having indole- and thiourea-binding sites. In: RSC ADVANCES, 4 (39). pp. 20592-20598.

Murali, P and Ramamurty, U (2005) Embrittlement of a bulk metallic glass due to $sub- T_g$ annealing. In: Acta Materialia, 53 (5). pp. 1467-1478.

Murali, P and Ramamurty, U and Shenoy, Vijay B (2008) Factors influencing deformation stability of binary glasses. In: Journal of Chemical Physics, 128 (10). 104508-1-104508-6.

Murali, Pramod and Ranjit, K and Bhat, Navakanta and Banerjee, Gaurab and Amrutur, Bharadwaj and Bhat, KN and Ramamurthy, Praveen C (2012) A CMOS Gas Sensor Array Platform With Fourier Transform Based Impedance Spectroscopy. In: IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 59 (11). pp. 2507-2517.

Murali, S and Kashyap, KT and Raman, KS and Murthy, KSS (1993) Inhibition of delayed ageing by trace additions in Al---7Si---0.3Mg cast alloy. In: Scripta Metallurgica et Materialia, 29 (11). 1421-1426 .

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1997) Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchloric and Nitric Acid Electrolytes. In: Materials Characterization, 38 (4-5). pp. 273-286.

Murali, S and Raman, KS and Murthy, KSS (1996) A1-7Si-0.3Mg cast alloy: Formation and crystal structure of beta-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 phases. In: 5th International Conference on Aluminium Alloys - Their Physical and Mechanical Properties (ICAA5), JUL 01-05, 1996, GRENOBLE, FRANCE.

Murali, S and Raman, KS and Murthy, KSS (1992) Effect of magnesium, iron (impurity) and solidification rates on the fracture toughness of Al-7Si-0.3Mg casting alloy. In: Materials Science and Engineering A, 151 (1). pp. 1-10.

Murali, S and Raman, KS and Murthy, KSS (1994) Morphological studies on $\beta-FeSiAI_5$ phase in AI-7Si-0.3Mg alloy with trace sdditions of Be, Mn, Cr, and Co. In: Materials Characterization, 33 (2). pp. 99-112.

Murali, S and Row, Guru TN and Sastry, DH and Raman, KS and Murthy, KSS (1994) Crystal structure of $\beta-FeSiAl_5$ and (Be-Fe)-$BeSiFe_2Al_8$ phases. In: Scripta Metallurgica et Materialia, 31 (3). pp. 267-271.

Muralikrishna, GM and Tas, B and Esakkiraja, N and Esin, VA and Kumar, KCH and Golovin, IS and Belova, IV and Murch, GE and Paul, A and Divinski, SV (2021) Composition dependence of tracer diffusion coefficients in Fe–Ga alloys: A case study by a tracer-diffusion couple method. In: Acta Materialia, 203 .

Murthy, KSN and Dwarakadasa, ES (1993) Corrosion behavior of 8090-T851 alloy in HCl solution containing metal cations. In: Bulletin of Electrochemistry, 9 (8-10). pp. 419-422.

Murthy, KSN and Subramanian, S and Dwarakadasa, ES (1997) Corrosion behaviour of 8090-T851 Al-Li alloy and aluminium in pH 2 solution containing cupric ions. In: British Corrosion Journal, 32 (1). pp. 63-67.

Murthy, VSR and Kishore, * and Seshan, S (1986) Morphology Of Flake, Ductile And Compacted Graphite. In: Journal of Metals, 38 (12). pp. 24-28.

Murthy, GS and Sastry, DH (1981) Impression Creep And High-Temperature Deformation Mechanism In Cadmium. In: Transactions of the Indian Institute of Metals, 34 (3). pp. 195-201.

Murthy, GS and Sastry, DH (1982) Impression creep of zinc and the rate-controlling dislocation mechanism of plastic flow at high temperatures. In: Physica Status Solidi A, 70 (1). pp. 63-71.

Murthy, KSN and Ambat, R and Dwarakadasa, ES (1994) The role of metal cations on the corrosion behaviour of 8090-T851 alloy in pH 2.0 solution. In: Corrosion Science, 36 (10). pp. 1765-1775.

Murthy, KSN and Dwarakadasa, ES (1995) Role of Li+ ions in corrosion behaviour of 8090 Al-Li alloy and aluminium in pH 12 aqueous solutions. In: British Corrosion Journal, 30 (2). 111-115 .

Murthy, VSR and Seshana, S and *, Kishore (1984) Subsurface features of compacted graphite cast iron subjected to wear. In: Wear, 97 (2). pp. 199-202.

Murty, BS and Naik, MD and Rao, Mohan M and Ranganathan, S (1992) Glass forming composition range in the Al-Ti system by mechanical alloying. In: Materials Forum, 16 (1). pp. 19-26.

Murty, BS (1993) Mechanical alloying—a novel synthesis route for amorphous phases. In: Bulletin of Materials Science, 16 (1). pp. 1-17.

Murty, BS and Mohan Rao, M and Ranganathan, S (1990) Synthesis of amorphous phase in Ti---Ni---Cu system by mechanical alloying. In: Scripta Metallurgica et Materialia, 24 (9). pp. 11819-1824.

Murty, BS and Ranganathan, S (1998) Novel materials synthesis by mechanical alloying/milling. In: International Materials Reviews, 43 (3). pp. 101-141.

Murty, BS and Ranganathan, S and Rao, Mohan M (1992) Solid state amorphization in binary Ti---Ni, Ti---Cu and ternary Ti---Ni---Cu system by mechanical alloying. In: Materials Science and Engineering: A, 149 (2). pp. 231-240.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys. In: Materials Science and Engineering A, 196 (1-2). pp. 237-241.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Milling maps and amorphization during mechanical alloying. In: Acta Metallurgica et Materialia, 43 (6). pp. 2443-2450.

Murty, BS and Rao, Mohan M and Ranganathan, S (1993) Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti-based systems. In: First International Conference on Nanostructured Materials, 22-26 Sept. 1992, Cancun, Mexico, pp. 459-467.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Thermodynamics of Glass Formation in Pure Metals. In: Calphad, 19 (3). pp. 297-304.

Murty, KN and Vasu, KI (1970) Clustering Kinelics in Aluminium-Silver Alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.

Murty, KN and Vasu, KI (1970) Clustering kinetics in aluminium-silver alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.

Murty, KN and Vasu, KI (1972) Vacancy-solute interaction energies in aluminium-silver alloys. In: Scripta Metallurgica, 6 (1). pp. 13-16.

Murty, KN and Vasu, KI (1971) A study of the slow reaction in Al-5 wt.% Ag alloy by resistivity measurements. In: Materials Science and Engineering, 7 (4). pp. 208-214.

Murty, Narayana SVS and Nayan, Niraj and Madhavan, R and Sharma, SC and George, KM and Suwas, Satyam (2015) Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (5). pp. 2091-2098.

Murty, S V S Narayana and Nayan, Niraj and Kumar, Pankaj and Narayanan, P Ramesh and Sharma, S C and George, Koshy M (2014) Microstructure-texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V Alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 589 . pp. 174-181.

Murugan, M and Alagupalamuthirsolai, M and Ashokkumar, K and Anandhi, A and Ravi, R and Rajangam, J and Dhanya, MK and Krishnamurthy, KS (2022) Climate change scenarios, their impacts and implications on Indian cardamom-coffee hot spots; one of the two in the world. In: Frontiers in Sustainable Food Systems, 6 .

Murugan, M and Ashokkumar, K and Alagupalamuthirsolai, M and Anandhi, A and Ravi, R and Dhanya, MK and Sathyan, T (2022) Understanding the Effects of Cardamom Cultivation on Its Local Environment Using Novel Systems Thinking Approach-the Case of Indian Cardamom Hills. In: Frontiers in Sustainable Food Systems, 6 .

Murugan, M and Ravi, R and Anandhi, A and Kurien, Sajan and Dhanya, MK (2017) Pesticide use in Indian cardamom needs change in cultivation practices. In: CURRENT SCIENCE, 113 (6). pp. 1058-1063.

Murugan, M and Shetty, PK and Ravi, R and Subbiah, A (2009) The Physiological Ecology of Cardamom (Elettaria cardamomum M) in Cardamom Agroforestry System. In: International Journal of Environmental Research, 3 (1). pp. 35-44.

Murugan, Muthusamy and Shetty, Paddu Krishnappa and Anandhi, Auvudai and Ravi, Raju and Alappan, Subbiah and Vasudevan, Muhund and Gopalan, Sreeja (2009) Rainfall changes over tropical montane cloud forests of southern Western Ghats, India. In: Current science, 97 (12). pp. 1755-1760.

Muthaiah, VMS and Indrakumar, S and Suwas, S and Chatterjee, K (2022) Surface engineering of additively manufactured titanium alloys for enhanced clinical performance of biomedical implants: A review of recent developments. In: Bioprinting, 25 .

Muthaiah, VMS and Koch, CC and Mula, S (2021) Thermal stability and mechanical properties of Fe-Cr-Zr alloys developed by mechanical alloying followed by spark plasma sintering. In: Journal of Alloys and Compounds, 856 .

Muzata, TS and Bose, S (2020) Polymer tethered graphene oxide influences miscibility and cooperative relaxation in LCST blends. In: Polymer, 188 .

Muzata, TS and Jagadeshvaran, PL and Bose, S (2020) Nanoparticles influence miscibility in LCST polymer blends: From fundamental perspective to current applications. In: Physical Chemistry Chemical Physics, 22 (36). pp. 20167-20188.

Muzata, Tanyaradzwa S and Jagadeshvaran, PL and Kar, Goutam Prasanna and Bose, Suryasarathi (2018) Phase miscibility and dynamic heterogeneity in PMMA/SAN blends through solvent free reactive grafting of SAN on graphene oxide. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 20 (29). pp. 19470-19485.

Mweene, B and Ghosh, S and Somani, M and Chauhan, A (2024) Improving fatigue resistance of ultrafine bainitic steel by exploiting segregation-induced bands. In: International Journal of Fatigue, 186 .

Mweene, L and Chipili, C and Munganyinka, JP and Khanal, GP and Sankaran, S and Kim, H and Filippov, L (2024) Experimental, benchmarks and theoretical investigations into the complexation of chalcopyrite and silica with guar gum and beneficiation of a siliceous copper ore using polyethylene oxide as a silica depressant. In: Minerals Engineering, 216 .

Mweene, L and Khanal, GP and Kashinga, RJ (2021) Experimental and theoretical investigation on the separation of chalcopyrite from biotite using xanthan gum as a selective depressant. In: Separation and Purification Technology, 274 .

Mweene, L and Khanal, GP and Nambaje, C (2021) Experimental study on the separation of quartz from pyrite using alginate as a selective depressant substantiated by theoretical analysis on intermolecular bonding. In: Separation and Purification Technology, 276 .

Mweene, L and Prasad Khanal, G (2024) Insights into the separation of chalcopyrite from pyrite in Mg and Ca using gum acacia, xanthomonas campestris and guar gum: An experimental study validated by theoretical investigations. In: Minerals Engineering, 218 .

Mweene, L and Prasad Khanal, G and Kawala, J and Subramanian, S (2022) Investigations into the flotation of molybdenite in the presence of chalcopyrite using (3S,4S,5S,6R)-3,4,5,6-tetrahydroxyoxane-2-carboxylate acid as a novel selective depressant: An experimental and theoretical perspective. In: Journal of Molecular Liquids, 368 .

Mweene, L and Subramanian, S (2019) Beneficiation studies on lean grade copper ore by selective flocculation and flotation techniques. In: Obogashchenie Rud, 2019 (3). pp. 15-21.

N

Nabi, Hasan Sadat and Pentcheva, Rossitza and Ranjan, Rajeev (2010) Ab initio electronic structures of rhombohedral and cubic HgXO3 (X = Ti, Pb). In: Journal Of Physics-Condensed Matter, 22 (4).

Nachiappan, C and Rangaraj, L and Divakar, C and Jayaram, V (2010) Synthesis and Densification of Monolithic Zirconium Carbide by Reactive Hot Pressing. In: Journal of the American Ceramic Society, 93 (5). pp. 1341-1346.

Nadammal, N and Rajput, M and Gupta, SK and Ivanov, E and Reddy, AS and Suwas, S and Chatterjee, K (2022) Laser Powder Bed Fusion Additive Manufacturing of a Low-Modulus Ti-35Nb-7Zr-5Ta Alloy for Orthopedic Applications. In: ACS Omega, 7 (10). pp. 8506-8517.

Nadammal, Naresh and Kailas, Satish V and Suwas, Satyam (2015) A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy. In: MATERIALS & DESIGN, 65 . pp. 127-138.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. In: JOM, 67 (5). pp. 1014-1021.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.

Nadimpalli, Siva PV and Tripuraneni, Rajasekhar and Sethuraman, Vijay A (2015) Real-Time Stress Measurements in Germanium Thin Film Electrodes during Electrochemical Lithiation/Delithiation Cycling. In: JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 162 (14). A2840-A2846.

Nag, Debjani and Sriramoju, S K and Lahiri, A K (2018) Challenges in extractive metallurgy and mineral dressing. In: Internatioinal Conference on Advances in Materials and Processing - Challenges and Opportunities (AMPCO), NOV 30-DEC 02, 2017, Roorkee, INDIA, pp. 17041-17045.

Nagarajan, R and Ranganathan, S and Aoki, K and Chattopadhyay, K (1997) Metastable microstructures in rapidly solidified Ni rich TiNi alloys. In: Materials Transactions, JIM, 38 (5). pp. 406-412.

Nagarajan, R and Aoki, K and Chattopadhyay, K (1994) Microstructural development in rapidly solidified Ti-Ni alloys. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 198-204.

Nagarajan, R and Aoki, K and Chattopadhyay, K (1997) Synthesis of nanodispersed phases during rapid solidification and crystallization of glasses in Ti75Ni25 alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2223-2232.

Nagarajan, R and Chattopadhyay, K (1994) Intermetallic Ti2Ni/TiNi nanocomposite by rapid solidification. In: Acta metallurgica et materialia, 42 (3). 947 -958 .

Nagarajan, R and Manjini, S and Chattopadhyay, K and Aoki, K (1997) The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic TiNi alloys. In: Journal of Materials Science, 32 (22). pp. 6021-6027.

Nagarajan, R and Ranganathan, S (1994) A study of the glass-forming range in the ternary Ti-Ni-Al system by mechanical alloying. In: Eighth International Conference on Rapidly Quenched and Metastable Materials, 22-27 Aug. 1993, Sendai, Japan, pp. 168-172.

Nagarajan, R and Ranganathan, S and Chattopadhyay, K (1997) Synthesis of nanostructured titanium alloys. In: Metals Materials and Processes, 9 (3). pp. 259-266.

Nagarajan, Sucheta and Dutta, B and Surappa, MK (1999) The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites. In: Composites Science and Technology, 59 (6). 897-902 .

Nagaraju, Ganganagappa and Chithaiahb, Pallellappa and Ashokac, Siddaramanna and Mahadevaiah, Narayanappa (2012) Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior. In: CRYSTAL RESEARCH AND TECHNOLOGY, 47 (8). pp. 868-875.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1970) Free convection heat transfer in vertical annuli. In: Chemical Engineering Science, 25 (4). pp. 605-610.

Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. [Preprint]

Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. In: Journal of Materials Research, 15 (5). pp. 1131-1144.

Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3 / Al-AlN composites. [Preprint]

Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites. In: Journal of Materials Research, 15 (5). pp. 1145-1153.

Nagendra, N and Rao, BS and Jayaram, V (1999) Microstructures and properties of Al2O3/ Al-AlN composites by Pressureless Infiltration of Al-alloys. [Preprint]

Nagendran, R and Shakuntala, K and Natarajan, GN and Vasan, HRK (1981) Observations On The Fecundity Of The Cyprinid Rasbora-Daniconius (Hamilton). In: Proceedings Of The Indian Academy Of Sciences-Animal Sciences, 90 (4). pp. 381-388.

Naik, Kumar TSS and Anil, AG and Swamy, BEK and Singh, S and Madhavi, V and Raghavendra, SM and Ramamurthy, PC (2022) A novel electrochemical sensor based on 2,6-bis (2-benzimidazoyl) pyridine for the detection of Bisphenol A. In: Materials Chemistry and Physics, 275 .

Naik, TSSK and Singh, S and Narasimhappa, P and Varshney, R and Singh, J and Khan, NA and Zahmatkesh, S and Ramamurthy, PC and Shehata, N and Kiran, GN and Sunil, K (2023) Green and sustainable synthesis of CaO nanoparticles: Its solicitation as a sensor material and electrochemical detection of urea. In: Scientific Reports, 13 (1).

Naik, TSSK and Singh, S and Pavithra, N and Varshney, R and Ramamurthy, PC (2022) Green Synthesized CaO NPs Based Electrochemical Sensor for the Sensitive Detection of Dopamine. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore, India.

Naik, TSSK and Swamy, BEK and Ramamurthy, PC and Chetankumar, K (2020) Poly (L-leucine) modified carbon paste electrode as an electrochemical sensor for the detection of paracetamol in presence of folic acid. In: Materials Science for Energy Technologies, 3 . pp. 626-632.

Naik, TSSK and Swamy, BEK and Singh, S and Singh, J and Naik, EI and Jayaprakash, GK and Ramamurthy, PC (2022) Fabrication and theoretical analysis of sodium alpha-olefin sulfonate-anchored carbon paste electrode for the simultaneous detection of adrenaline and paracetamol. In: Journal of Applied Electrochemistry .

Nain, A and Chakraborty, S and Jain, N and Choudhury, S and Chattopadhyay, S and Chatterjee, K and Debnath, S (2024) 4D hydrogels: fabrication strategies, stimulation mechanisms, and biomedical applications. In: Biomaterials Science .

Nain, A and Tseng, Y-T and Gupta, A and Lin, Y-F and Arumugam, S and Huang, Y-F and Huang, C-C and Chang, H-T (2023) NIR-activated quercetin-based nanogels embedded with CuS nanoclusters for the treatment of drug-resistant biofilms and accelerated chronic wound healing. In: Nanoscale Horizons, 8 (12). pp. 1652-1664.

Nair, NM and Shakthivel, D and Panidhara, KM and Adiga, V and Ramamurthy, PC and Dahiya, R (2023) Self-Powered e-Skin Based on Integrated Flexible Organic Photovoltaics and Transparent Touch Sensors. In: Advanced Intelligent Systems, 5 (10).

Nair, Sharika Thankappan and Vijayan, Poornima P and Xavier, Priti and Bose, Suryasarathi and George, Soney C and Thomas, Sabu (2015) Selective localisation of multi walled carbon nanotubes in polypropylene/natural rubber blends to reduce the percolation threshold. In: COMPOSITES SCIENCE AND TECHNOLOGY, 116 . pp. 9-17.

Nallabothula, Harsha and Bhattacharjee, Yudhajit and Samantara, Laxmi and Bose, Suryasarathi (2019) Processing-Mediated Different States of Dispersion of Multiwalled Carbon Nanotubes in PDMS Nanocomposites Influence EMI Shielding Performance. In: ACS OMEGA, 4 (1). pp. 1781-1790.

Nambaje, C and Mweene, L and Subramanian, S and Krishnan, S and Santosh, M (2020) Xanthan gum based investigations into the surface chemistry of cassiterite and beneficiation of cassiterite tailings. In: Mineral Processing and Extractive Metallurgy Review . (In Press)

Nanda, Ajaya K and Kishore, * (2001) Thermal-Initiating Potentialities of Poly(methyl methacrylate) Peroxide: Metamorphosis of Block-into-Block Copolymer and Comparative Studies on Surface Texture and Morphology. In: Journal Polymer Science A: Polymer Chemistry, 39 . pp. 546-554.

Nanda, Ajaya Kumar and *, Kishore (2000) Thermal-Initiating Potentialities of Vinyl Polyperoxides: Transmutation of Block-into-Block Copolymer and an Exploratory Investigation of Surface Texture and Morphology. In: Journal of Polymer Science Part -A Polymer Chemistry, 38 (19). pp. 3665-3673.

Nanda, KK and Kruis, FE (2014) A radial differential mobility analyzer for the size-classification of gas-phase synthesized nanoparticles at low pressures. In: MEASUREMENT SCIENCE & TECHNOLOGY, 25 (7).

Nandan, R and Devi, HR and Kumar, R and Singh, AK and Srivastava, C and Nanda, KK (2020) Inner Sphere Electron Transfer Promotion on Homogeneously Dispersed Fe-N xCenters for Energy-Efficient Oxygen Reduction Reaction. In: ACS Applied Materials and Interfaces, 12 (32). pp. 36026-36039.

Nandan, R and Pandey, P and Gautam, A and Bisen, OY and Chattopadhyay, K and Titirici, MM and Nanda, KK (2021) Atomic Arrangement Modulation in CoFe Nanoparticles Encapsulated in N-Doped Carbon Nanostructures for Efficient Oxygen Reduction Reaction. In: ACS Applied Materials and Interfaces .

Nandan, R and Rekha, MY and Devi, HR and Srivastava, C and Nanda, KK (2021) High-entropy alloys for water oxidation: A new class of electrocatalysts to look out for. In: Chemical Communications, 57 (5). pp. 611-614.

Nandi, Proloy and Suwas, Satyam and Kumar, Subodh and Chattopadhyay, Kamanio (2013) The effect of minor addition of Ni on the microstructural evolution and mechanical properties of suction cast Al-0.14 at. pct Sc binary alloy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2591-2603.

Nandi, S and Tripathi, R and Adhikary, GD and Kumar, P and Misra, A (2020) Ultrahigh Infrared Photoresponse in Titanium Sesquioxide at Mott-Insulator Transition. In: Advanced Materials Interfaces .

Nandy, Anshuman and Tiwary, CS and Dutta, A and Chattopadhyay, K and Pradhan, SK (2015) Effect of Manganese (II) Oxide on microstructure and ionic transport properties of nanostructured cubic zirconia. In: ELECTROCHIMICA ACTA, 170 . pp. 360-368.

Nanjundaiah, RS and Rao, SS and Praveenkumar, K and Prabhu, TR and Shettigar, AK and Patel G C, M and Linul, E (2024) Fretting wear behavior on LPBF processed AlSi10Mg alloy for different heat treatment conditions. In: Journal of Materials Research and Technology, 30 . pp. 4330-4346.

Naorem, Rameshwari and Dayal, Govind and Ramakrishna, Anantha S and Rajeswaran, Bharathi and Umarji, AM (2015) Thermally switchable metamaterial absorber with a VO2 ground plane. In: OPTICS COMMUNICATIONS, 346 . pp. 154-157.

Narashimhan Ramana, L and Mudakavi, RJ and Raichur, AM (2020) Self-assembled albumin decorated MoS2aggregates and photo-stimuli induced geometrical switching for enhanced theranostics applications. In: Materials Advances, 1 (8). pp. 3000-3008.

Narasimhamurty, Vagesh D and Kumar, Subodh and Gupta, Govind S and Gupta, Manoj (2004) Evaluation of elastic modulus of an Al-MMC using finite element analysis. In: Steel GRIPS, 2 (3). pp. 198-202.

Narasimhan, R and Subramanya, HY and Patil, SD and Tandaiya, Parag and Ramamurty, U (2009) Stationary crack tip fields in elastic-plastic solids: an overview of recent numerical simulations. In: Journal Of Physics D-Applied Physics, 42 (21). 214005-1-214005-15.

Narasimhan, R and Tandaiya, Parag and Singh, I and Narayan, RL and Ramamurty, U (2015) Fracture in metallic glasses: mechanics and mechanisms. In: INTERNATIONAL JOURNAL OF FRACTURE, 191 (1-2, S). pp. 53-75.

Narasimhappa, P and Singh, S and Ramamurthy, PC (2023) Synthesis of water-soluble CdS quantum dots for the fluorescence detection of tetracycline. In: Environmental Pollution, 338 .

Narasimhappa, P. and Ramamurthy, P.C. (2023) Bio-mimicking the melanogenesis pathway using tyrosinase for dopamine sensing. In: Electrochimica Acta, 469 .

Narayan, Bastola and Adhikari, Sangeeta and Madras, Giridhar and Ranjan, Rajeev (2017) Trapping a Metastable Ferroelectric Phase by Size Reduction in Semiconducting Ferroelectric BiFeO3-PbTiO3 and Its Implications for Photocatalytic Response. In: PHYSICAL REVIEW APPLIED, 7 (2).

Narayan, Bastola and Malhotra, Jaskaran Singh and Pandey, Rishikesh and Yaddanapudi, Krishna and Nukala, Pavan and Dkhil, Brahim and Senyshyn, Anatoliy and Ranjan, Rajeev (2018) Electrostrain in excess of 1% in polycrystalline piezoelectrics. In: NATURE MATERIALS, 17 (5). 427+.

Narayan, Bastola and Sorb, YA and Loukya, B and Samanta, Atanu and Senyshyn, Anatoliy and Datta, Ranjan and Singh, Abhishek Kumar and Narayana, Chandrabhas and Ranjan, Rajeev (2016) Interferroelectric transition as another manifestation of intrinsic size effect in ferroelectrics. In: PHYSICAL REVIEW B, 94 (10).

Narayan, Manish and Surappa, MK and Bai, Pramila BN (1995) Dry sliding wear of Al alloy 2024-Al203 particle metal matrix composites. In: Wear, 181 (part 2). pp. 563-570.

Narayan, R and Gadag, S and Cheruku, SP and Raichur, AM and Day, CM and Garg, S and Manandhar, S and Pai, KSR and Suresh, A and Mehta, CH and Nayak, Y and Kumar, N and Nayak, UY (2021) Chitosan-glucuronic acid conjugate coated mesoporous silica nanoparticles: A smart pH-responsive and receptor-targeted system for colorectal cancer therapy. In: Carbohydrate Polymers, 261 .

Narayan, R and Gadag, S and Mudakavi, RJ and Garg, S and Raichur, AM and Nayak, Y and Kini, SG and Pai, KSR and Nayak, UY (2021) Mesoporous silica nanoparticles capped with chitosan-glucuronic acid conjugate for pH-responsive targeted delivery of 5-fluorouracil. In: Journal of Drug Delivery Science and Technology, 63 .

Narayan, R L and Raut, Devaraj and Ramamurty, U (2018) A quantitative connection between shear band mediated plasticity and fracture initiation toughness of metallic glasses. In: ACTA MATERIALIA, 150 . pp. 69-77.

Narayan, RL and Boopathy, Kombaiah and Sen, Indrani and Hofmann, DC and Ramamurty, U (2010) On the hardness and elastic modulus of bulk metallic glass matrix composites. In: Scripta Materialia, 63 (7). pp. 768-771.

Narayan, RL and Singh, PS and Hofmann, DC and Hutchinson, N and Flores, KM and Ramamurty, U (2012) On the microstructure-tensile property correlations in bulk metallic glass matrix composites with crystalline dendrites. In: ACTA MATERIALIA, 60 (13-14). pp. 5089-5100.

Narayan, RL and Tandaiya, Parag and Garrett, GR and Demetriou, MD and Ramamurty, U (2015) On the variability in fracture toughness of `ductile' bulk metallic glasses. In: SCRIPTA MATERIALIA, 102 . pp. 75-78.

Narayan, RL and Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2014) Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass. In: ACTA MATERIALIA, 80 . pp. 407-420.

Narayan, Reema and Nayak, Usha Y and Raichur, Ashok M and Garg, Sanjay (2018) Mesoporous Silica Nanoparticles: A Comprehensive Review on Synthesis and Recent Advances. In: PHARMACEUTICS, 10 (3).

Narayan, SP and Basu, K and Prasad, YVRK and Jayaram, V and Das, BN (1998) A study of the formability of melt spun Nd-Fe-B magnets. In: Scripta Materialia, 38 (11). pp. 1725-1730.

Narayanachari, KVLV and Chandrasekar, Hareesh and Banerjee, Amiya and Varma, KBR and Ranjan, Rajeev and Bhat, Navakanta and Raghavan, Srinivasan (2016) Growth stress induced tunability of dielectric permittivity in thin films. In: JOURNAL OF APPLIED PHYSICS, 119 (1).

Narayanan, S and Raghunathan, N and Nayak, UB and Lahiri, AK (1983) Environmental effects on grinding. In: International Journal of Mineral Processing, 10 (4). pp. 309-317.

Narayanasamy, K and Chinnakkannu, KC and Sharma, D and Kannaiyan, D (2023) Enhanced microwave absorption properties of magnetite nanoparticles decorated multi walled carbon nanotubes loaded polyaniline/polyvinyl alcohol nanocomposites. In: Polymers for Advanced Technologies .

Narayanaswamy, V and Al-Omari, IA and Kamzin, AS and Issa, B and Tekin, HO and Khourshid, H and Kumar, H and Mallya, A and Sambasivam, S and Obaidat, IM (2021) Specific absorption rate dependency on the co2+ distribution and magnetic properties in coxmn1-xfe2o4 nanoparticles. In: Nanomaterials, 11 (5).

Narayanaswamy, V and Kumar, H and Srivastava, C and Alaabed, S and Aslam, M and Mallya, A and Obaidat, IM (2020) Adsorption of methylene blue and rhodamine b on graphene oxide-Fe3O4 nanocomposite: Molecular dynamics and monte carlo simulations. In: Materials Express, 10 (3). pp. 314-324.

Narayanaswamy, V and Qurishi, Y and Srivastava, C (2017) GO-Fe3O4 Nanoparticle composite for selective targeting of cancer cells. In: Nano Biomedicine and Engineering, 9 (1). pp. 96-102.

Narayanaswamy, Venkatesha and Obaidat, Ihab M and Kamzin, Aleksandr S and Latiyan, Sachin and Jain, Shilpee and Kumar, Hemant and Srivastava, Chandan and Alaabed, Sulaiman and Issa, Bashar (2019) Synthesis of Graphene Oxide-Fe3O4 Based Nanocomposites Using the Mechanochemical Method and in Vitro Magnetic Hyperthermia. In: INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 20 (13).

Natarajan, KA (2009) Microbial Aspects of Environmentally Benign Iron Ore. In: Iron Ore Conference 2009, July 27-29, 2009, Perth, Australia, pp. 27-34.

Natarajan, KA (2009) Microbial aspects of acid generation and bioremediation with relevance to indian mining. In: 18th International Biohydrometallurgy Symposium Bariloche, SEP 13-17, 2009, Bariloche, ARGENTINA, pp. 645-648.

Natarajan, KA and Iwasaki, I (1985) Electrochemical aspects of xanthate and sulfide mineral oxidation by ozone. [Book Chapter]

Natarajan, Janeni and Madras, Giridhar and Chatterjee, Kaushik (2017) Development of Graphene Oxide-/Galactitol Polyester-Based Biodegradable Composites for Biomedical Applications. In: ACS Omega, 2 (9). pp. 5545-5556. ISSN 2470-1343

Natarajan, Janeni and Madras, Giridhar and Chatterjee, Kaushik (2016) Maltitol-based biodegradable polyesters with tailored degradation and controlled release for bone regeneration. In: RSC ADVANCES, 6 (46). pp. 40539-40551.

Natarajan, Janeni and Madras, Giridhar and Chatterjee, Kaushik (2016) Tailoring the degradation rate and release kinetics from poly(galactitol sebacate) by blending with chitosan, alginate or ethyl cellulose. In: INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 93 (B, SI). pp. 1591-1602.

Natarajan, Janeni and Movva, Sahitya and Madras, Giridhar and Chatterjee, Kaushik (2017) Biodegradable galactitol based crosslinked polyesters for controlled release and bone tissue engineering. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 77 . pp. 534-547.

Natarajan, Janeni and Rattan, Shruti and Singh, Utkarsh and Madras, Giridhar and Chatterjee, Kaushik (2014) Polyanhydrides of Castor Oil-Sebacic Acid for Controlled Release Applications. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 53 (19). pp. 7891-7901.

Natarajan, K A (2020) Principles of Corrosion Processes. [Book Chapter]

Natarajan, K A (2017) Use of Bioflocculants for Mining Environmental Control. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 70 (2). pp. 519-525.

Natarajan, K A and Padukone, S Usha (2012) Microbially induced separation of quartz from hematite using yeast cells and metabolites. In: MINERALS & METALLURGICAL PROCESSING, 29 (2). pp. 81-87.

Natarajan, KA (1992) Ball wear and its control in the grinding of a lead-zinc sulphide ore. In: International Journal of Mineral Processing, 34 (1-2). pp. 161-175.

Natarajan, KA (1998) Biocorrosion in industrial applications. In: International Conference on Corrosion (CORCON 97), DEC 03-06, 1997, Mumbai, India.

Natarajan, KA (2013) Biofouling and microbially influenced corrosion of stainless steels. In: Stainless Steel Centenary Symposium (SSCS 2013), AUG 12-14, 2013, Mumbai, INDIA, pp. 539-551.

Natarajan, KA (1992) Bioleaching of sulphides under applied potentials. In: Hydrometallurgy, 29 (1-3). pp. 161-172.

Natarajan, KA (2016) Biomineralization and Biobeneficiation of Bauxite. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 69 (1). pp. 15-21.

Natarajan, KA (2018) Bioremediation of arsenic using bioflocculants and microorganisms. [Book Chapter]

Natarajan, KA (2019) Biotechnology for environmentally benign gold production. [Book Chapter]

Natarajan, KA (1993) Biotechnology in gold processing. In: Bulletin of Materials Science, 16 (6). pp. 501-508.

Natarajan, KA (2018) Biotechnology of metals : Principles, recovery methods, and environmental concerns. [Book Chapter]

Natarajan, KA (1985) Corrosive and abrasive wear in ore grinding. In: Wear, 103 (3). pp. 253-267.

Natarajan, KA (2013) Developments in Biotechnology for Environmentally Benign Iron Ore Beneficiation. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 66 (5-6, S). pp. 457-465.

Natarajan, KA (1992) Effect of Applied Potentials on the Activity and Growth of Thiobacillus ferrooxidans. In: Biotechnology and Bioengineering, 39 (9). pp. 907-913.

Natarajan, KA (1992) Electrobioleaching of base metal sulfides. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 23 (1). pp. 5-11.

Natarajan, KA (1996) Laboratory studies on ball wear in the grinding of a chalcopyrite ore. In: International Journal of Mineral Processing, 46 (3-4). pp. 205-213.

Natarajan, KA (2006) Microbially-induced mineral flotation and flocculation: Prospects and challenges. In: Proc. XXIII Int. Mineral Processing Congress, Sep 2006, Istanbul, Turkey.

Natarajan, KA and Ambika, SN (2008) Biological aspects of ARSENIC Speciation and Remediation. In: Hydrometallurgy-2008 (SME).

Natarajan, KA and Das, A (2003) Surface chemical studies on ‘Acidithiobacillus’ group of bacteria with reference to mineral flocculation. In: International Journal of Mineral Processing, 72 (1-4). pp. 189-198.

Natarajan, KA and Deo, Namita (2001) Role of bacterial interaction and bioreagents in iron ore flotation. In: International Journal of Mineral Processing, 62 (1-4). pp. 143-157.

Natarajan, KA and Devi, KK (2016) Bioflocculants Relevant for Water Treatment and Remediation. [Book Chapter]

Natarajan, KA and Kumari, Abha (2014) Role of applied potentials on bioleaching of chalcopyrite concentrate and growth of Acidithiobacillus ferrooxidans. In: MINERALS & METALLURGICAL PROCESSING, 31 (4). pp. 215-222.

Natarajan, KA and Modak, JM and Anand, P (1997) Some microbiological aspects of bauxite mineralization and beneficiation. In: Minerals and Metallurgical Processing, 14 (2). pp. 47-53.

Natarajan, KA and Padukone, Usha S (2013) Biological sulfate reduction of a sulfate-rich industrial waste liquor using sulfate reducing bacteria. In: Minerals & Metallurgical Processing Journal, 30 (4). pp. 205-211.

Natarajan, KA and Prakasan, Sabari MR (2013) Biodegradation of sodium isopropyl xanthate by Paenibacillus polymyxa and Pseudomonas putida. In: Minerals & Metallurgical Processing Journal, 30 (4). pp. 226-232.

Natarajan, KA and Subramanian, S and Braun, Jean-Jacques (2006) Environmental impact of metal mining biotechnological aspects of water pollution and remediation an Indian experience. In: Journal of Geochemical Exploration, 88 (1-3). pp. 45-48.

Natarajan, KA and Subramanian, S and Modak, JM (1999) Biosorption of heavy metal ions from aqueous and cyanide solutions using fungal biomass. In: Biohydrometallurgy and the Environment Toward the Mining of the 21st Century - Proceedings of the International Biohydrometallurgy Symposium, JUN 20-23, 1999, Madrid, Spain.

Natarajan, KA and Sudeesha, K and Rao, GR (1994) Stability of copper tolerance in Thiobacillus ferrooxidans. In: Antonie van Leeuwenhoek, 66 (4). pp. 303-306.

Natarajan, KA and Upadhyaya, Ramesh (1986) Flocculation studies on iron ore fines using synthetic polymeric flocculants. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 627-636.

Nath, B and Chaudhuri, RR and Shrivastava, M and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2024) Role of transition metal iodides in defect and charge dynamics of perovskite solar cells. In: Solar Energy, 282 .

Nath, B and Khasnabis, S and Ramamurthy, PC and Mahapatra, DR and Hedge, G (2023) Interfacial engineering using ammonia-functionalized MXene in perovskite solar cells. In: Nanotechnology for Environmental Engineering, 8 . pp. 847-858.

Nath, B and Kumar, MP and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2022) Various Spectral Responses Correlated Performance of Perovskite Solar Cells. In: 2022 IEEE International Conference on Emerging Electronics, ICEE 2022, 11 - 14 December 2022, Bangalore, India.

Nath, B and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2022) Effect of cuprous iodide passivation in perovskite solar cells. In: Journal of Materials Science: Materials in Electronics, 33 (18). pp. 14457-14467.

Nath, B and Ramamurthy, PC and Mahapatra, DR and Hegde, G (2022) Electrode Transport Layer-Metal Electrode Interface Morphology Tailoring for Enhancing the Performance of Perovskite Solar Cells. In: ACS Applied Electronic Materials, 4 (2). pp. 689-697.

Nath, B and Ramamurthy, PC and Roy Mahapatra, D and Hegde, G (2021) Effect of top electrode using Silver Nano powder on the performance of Perovskite Solar cells. In: 48th IEEE Photovoltaic Specialists Conference, 20-25 Jun 2021, Bengaluru, pp. 326-329.

Nath, B and Singh, S and Kumar Behera, S and Ramamurthy, PC and Roy Mahapatra, D and Hegde, G (2023) Perovskite solar cell performance analysis via interface engineering employing MOF-composite. In: Solar Energy, 257 . 249 – 256.

Nath, B and Uppara, B and Singh, S and Ramamurthy, PC and Roy Mahapatra, D and Hegde, G (2024) Exploring the potential of green synthesized ZnO-SnO2 composite as an effective electron transport layer for perovskite solar cells: A sustainable approach. In: Chemical Engineering Science, 296 .

Nath, S and Konkati, C and Gupta, RK and Chauhan, A (2024) Quasi-static and dynamic response of AA-2219-T87 aluminium alloy. In: Materials Today Communications, 38 .

Nayak, Biswadeep and Balachander, Gowri Manohari and Manjunath, Sathish and Rangarajan, Annapoorni and Chatterjee, Kaushik (2019) Tissue mimetic 3D scaffold for breast tumor-derived organoid culture toward personalized chemotherapy. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 180 . pp. 334-343.

Nayak, HV Sudhaker and Vasu, KI and Prasad, YVRK (1980) Texture dependent stress corrosion failure of commercial titanium sheets in bromine-methanol solution. In: Journal of Materials Science, 15 (5). pp. 1265-1275.

Nayak, Sudhakar HV and Vasu, KI and Prasad, YVRK (1978) Transcrystalline stress corrosion cracking in cold rolled commercial titanium in methanol-bromine solution: Role of crystallographic texture. In: Scripta Metallurgica, 12 (10). 869-872 .

Nayan, N and Madhavan, R and Saxena, KK and Narayana Murty, SVS and Bakshi, SR (2022) Microstructure and texture evolution during the groove rolling of cast aluminum/carbon nanotube composites. In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering .

Nayan, N and Roy, D and Buravalla, V and Ramamurty, U (2008) Unnotched fatigue behavior of an austenitic Ni-Ti shape memory alloy. In: Materials Science and Engineering A, 497 (1-2). pp. 333-340.

Nayan, Niraj and Buravalla, V and Ramamurty, U (2009) Effect of mechanical cycling on the stress-strain response of a martensitic Nitinol shape memory alloy. In: Materials Science and Engineering A, 525 (1-2). pp. 60-67.

Nayan, Niraj and Singh, Gaurav and Murty, Narayana SVS and Jha, Abhay K and Pant, Bhanu and George, Koshy M (2015) High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (5). pp. 2201-2215.

Nayan, Niraj and Singh, Gaurav and Murty, SVSN and Jha, Abhay K and Pant, Bhanu and George, Koshy M and Ramamurty, Upadrasta (2014) Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy. In: INTERMETALLICS, 55 . pp. 145-153.

Nayan, Niraj and Singh, Gaurav and Prabhu, T Antony and Murty, S V S Narayana and Ramamurty, U (2018) Cryogenic Mechanical Properties of Warm Multi-Pass Caliber-Rolled Fine-Grained Titanium Alloys: Ti-6Al-4V (Normal and ELI Grades) and VT14. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (1). pp. 128-146.

Naz, A and Chowdhury, A and Pareek, S and Kumar, P and Poddar, NK (2024) A critical review on the active anti-viral metabolites of bioprospecting traditionally used plant species from semi-arid regions of the subcontinent. In: Journal of Complementary and Integrative Medicine .

Naz, A and Chowdhury, A and Pareek, S and Kumar, P and Poddar, NK (2024) A critical review on the active anti-viral metabolites of bioprospecting traditionally used plant species from semi-arid regions of the subcontinent. In: Journal of Complementary and Integrative Medicine .

Neelgund, Gururaj M and Shivashankar, SA and Narasimhamurthy, T and Rathore, RS (2007) Tris(acetylacetonato-kappa O-2,O`)(1,10-phenanthroline-kappa N-2,N`)erbium(III). In: Acta Crystallographica Section C-Crystal Structure Communications, 63 (Part 2). M74-M76.

Negedu, SD and Karstev, A and Palit, M and Pandey, P and Olu, FE and Roy, AK and Das, GP and Ajayan, PM and Kumbhakar, P and Tiwary, CS (2022) Energy Harvesting from Atomically Thin Co2Te3. In: Journal of Physical Chemistry C, 126 (30). pp. 12545-12553.

Negedu, SD and Tromer, R and Siddique, S and Woellner, CF and Olu, FE and Palit, M and Roy, AK and Pandey, P and Galvao, DS and Kumbhakar, P and Tiwary, CS (2022) Enhancement in magnetization of two-dimensional cobalt telluride and its magnetic field-assisted photocatalytic activity. In: Applied Physics A: Materials Science and Processing, 128 (5).

Negedu, Solomon Demiss and Tromer, Raphael and Gowda, Chinmayee Chowde and Woellner, Cristiano F and Olu, Femi Emmanuel and Roy, Ajit K and Pandey, Prafull and Galvao, Douglas S and Ajayan, Pulickel M and Kumbhakar, Partha and Tiwary, Chandra S (2022) Two-dimensional cobalt telluride as a piezo-tribogenerator. In: Nanoscale . ISSN 2040-3364

Nellaiappan, S and Katiyar, NK and Kumar, R and Parui, A and Malviya, KD and Pradeep, KG and Singh, AK and Sharma, S and Tiwary, CS and Biswas, K (2020) High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization. In: ACS Catalysis, 10 (6). pp. 3658-3663.

Neogy, S and Tewari, R and Dey, GK and Banerjee, S and Ranganathan, S (2012) A study on the formation of crystalline phases during solidification and crystallisation in the bulk metallic glass of Zr53Cu21Al10Ni8Ti8 composition. In: PHILOSOPHICAL MAGAZINE, 92 (17). pp. 2136-2149.

Nethravathi, C and Machado, Jyothi and Gautam, UK and Avadhani, GS and Rajamathi, Michael (2012) Exfoliation of copper hydroxysalt in water and the conversion of the exfoliated layers to cupric and cuprous oxide nanoparticles. In: Nanoscale , 4 (2). pp. 496-501.

Nilawar, S and Chatterjee, K (2022) Olive oil-derived degradable polyurethanes for bone tissue regeneration. In: Industrial Crops and Products, 185 .

Nilawar, S and Chatterjee, K (2021) Surface Decoration of Redox-Modulating Nanoceria on 3D-Printed Tissue Scaffolds Promotes Stem Cell Osteogenesis and Attenuates Bacterial Colonization. In: Biomacromolecules .

Nilawar, S and Uddin, M and Chatterjee, K (2021) Surface engineering of biodegradable implants: Emerging trends in bioactive ceramic coatings and mechanical treatments. In: Materials Advances, 2 (24). pp. 7820-7841.

Nilawar, S and Yadav, P and Jain, N and Saini, DK and Chatterjee, K (2024) Protective Role of Nanoceria-Infused Nanofibrous Scaffold toward Bone Tissue Regeneration with Senescent Cells. In: Biomacromolecules, 25 (7). pp. 4074-4086.

Nilawar, Sagar and Bs, Mohankumar and Chatterjee, Kaushik (2023) Nanoceria-decorated Graphene Nanosheets Enhance Mechanical Properties and Bioactivity of a Degradable Polyurethane for Biomedical Applications. In: Journal of Polymers and the Environment .

Nilsson, R and Seetharaman, S and Jacob, KT (1994) A modified sulphide capacity function. In: ISIJ International, 34 (11). 876 -882.

Nithin, B and Chattopadhyay, K and Phanikumar, G (2018) Characterization of the Hot Deformation Behavior and Microstructure Evolution of a New gamma-gamma ` Strengthened Cobalt-Based Superalloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (10). pp. 4895-4905.

Nithin, B and Samanta, A and Makineni, S K and Alam, T and Pandey, P and Singh, Abhishek K and Banerjee, R and Chattopadhyay, K (2017) Effect of Cr addition on gamma-gamma ` cobalt-based Co-Mo-Al-Ta class of superalloys: a combined experimental and computational study. In: JOURNAL OF MATERIALS SCIENCE, 52 (18). pp. 11036-11047.

Nolan, D and Dwarkadasa, ES and Chandra, T (1988) Deformation Of Al-Li-Cu-Mg-Zr Alloys At High-Temperatures. In: Journal of Metals, 40 (11). p. 47.

O

Oberoi, Sudhi and Sonawane, Dipali and Kumar, Praveen (2016) Effect of strain rate and filler size on mechanical behavior of a Cu filled elastomer based composite. In: COMPOSITES SCIENCE AND TECHNOLOGY, 127 . pp. 185-192.

Okabe, TH and Waseda, Y and Hirota, K and Jacob, KT (1998) Thermodynamic properties of Ln-O (Ln = La, Pr, Nd) solid solutions and their deoxidation by molten salt electrolysis. In: The Mining and Materials Processing Institute of Japan, 114 (11). pp. 813-818.

Okabe, TH and Waseda, Y and Jacob, KT (2001) The Thermodynamics of Oxygen in Reactive Metals. In: Purification Process and Characterization of Ultra High Purity Metals (1). pp. 3-38.

Okabe, TH and Waseda, Y and Jacob, KT and Horiuchi, A (2000) Physicochemical studies of lithium nitride in molten LiCl-KCl. In: Materials Transactions, JIM, 41 (7). pp. 822-830.

Okabe, TH and Waseda, Y and Jacob, KT and Park, I (1999) Production of niobium powder by electronically mediated reaction (EMR) using calcium as a reductant. In: Journal of Alloys and Compounds, 288 (1-2). pp. 200-210.

Okabe, Toru H (2001) Electrochemical Properties of Li3N Dissolved in Molten LiCl at 900 K. In: Journal of The Electrochemical Society, 148 (5).

Olu, FE and Hong, SJ and Chattopadhyay, K (2020) Mechanical and Thermoelectric Properties of Eutectic Composite (Bi, Sb)2Te3/Te Thermoelectric Material. In: Transactions of the Indian Institute of Metals, 73 (5). pp. 1147-1155.

Owen, DM and Chokshi, AH (1998) Final stage free sintering and sinter forging behavior of a yttria-stabilized tetragonal zirconia. In: Acta Materialia, 46 (02). pp. 719-729.

Owen, DM and Chokshi, AH (1998) The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (02). pp. 667-679.

Owen, David M and Chokshi, Atul H (2001) Analysis of deformation mechanisms in superplastic yttria-stabilized tetragonal zirconia. In: International Journal of Plasticity, 17 (3). pp. 353-368.

Owen, David M and Chokshi, Atul H and Nutt, Steven R (1997) Nucleation and growth characteristics of cavities during the early stages of tensile creep deformation in a superplastic zirconia-20 wt% alumina composite. In: Journal of the American Ceramic Society, 80 (9). pp. 2433-2436.

Ozden, Sehmus and Autreto, Pedro AS and Tiwary, Chandra Sekhar and Khatiwada, Suman and Machado, Leonardo and Galvao, Douglas S and Vajtai, Robert and Barrera, Enrique V and Ajayan, Pulickel M (2014) Unzipping Carbon Nanotubes at High Impact. In: NANO LETTERS, 14 (7). pp. 4131-4137.

Ozden, Sehmus and Narayanan, Tharangattu N and Tiwary, Chandra S and Dong, Pei and Hart, Amelia HC and Vajtai, Robert and Ajayan, Pulickel M (2015) 3D Macroporous Solids from Chemically Cross-linked Carbon Nanotubes. In: SMALL, 11 (6). pp. 688-693.

Ozdilek, Ceren and Bose, Suryasarathi and Leys, Jan and Seo, Jin Won and Wubbenhorst, Michael and Moldenaers, Paula (2011) Thermally induced phase separation in P alpha MSAN/PMMA blends in presence of functionalized multiwall carbon nanotubes: Rheology, morphology and electrical conductivity. In: Polymer, 52 (20). pp. 4480-4489.

P

Padmanabhan, K and Kishore, * (1995) Failure behaviour of carbon fibre/epoxy composites in pin-ended buckling and bending tests. In: Composites, 26 (3). pp. 201-206.

Padmanabhan, K and Kishore, * (1994) Fibre-matrix interfacial failure sequences in translaminar flexure of glass-epoxy composites. In: Journal of Materials Science, 29 (1). pp. 33-38.

Padmanabhan, K and Kishore, * (1992) Flexural studies on asymmetric hybrid Kevlar fabric/epoxy composites. In: Journal of Materials Science, 27 (16). pp. 4282-4286.

Padmanabhan, K and Kishore, * (1994) On the elastic-plastic behaviour of woven fabric kevlar/epoxy composites. In: International Journal of Fracture, 65 (3). R59-R61.

Padmanabhan, K and Kishore, * (1990) The effect of carbon coating on the flexural properties of Kevlar/epoxy composites. In: Journal of Materials Science Letters, 9 (9). pp. 1109-1111.

Padmanabhan, K and Kishore, * (1993) The looping behaviour of Kevlar fibres. In: Scripta Metallurgica et Materialia, 28 (3). pp. 367-370.

Padmanabhan , K and Kishore, * (1990) Role of alumina in flexure of glass/epoxy composites. In: Bulletin of Materials Science, 13 (4). pp. 245-253.

Padmapriya, P and Abinandanan, TA and Jayaram, Vikram (1997) coarsening of an interconnected microstructure in an al-al2o3 composite. In: Scripta Materialia, 37 (12). pp. 1883-1888.

Padmavardhani, D and Prasad, YVRK (1991) Effect of zinc content on processing map for hot deformation of beta brass. In: Materials Science and Technology, 7 (10). pp. 947-953.

Padmavardhani, D and Prasad, YVRK (1991) Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (12). pp. 2993-3001.

Padmavardhani, D and Prasad, YVRK (1993) Effect of Zirconium on the Processing MAPS For Hot-Working of Alpha-Beta Brass. In: Zeitschrift für Metallkunde, 84 (1). pp. 57-62.

Padmavardhani, D and Prasad, YVRK (1992) Effect of zinc content on the processing map for hot working of α brass. In: Materials Science and Engineering: A, 157 (1). pp. 43-51.

Padmavardhani, D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys Part II Alpha-Beta nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5275-5279.

Padmavardhani , D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys. Part I - Alpha-nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5269-5274.

Padmavathy, N and Behera, SS and Pathan, S and Das Ghosh, L and Bose, S (2019) Interlocked graphene oxide provides narrow channels for effective water desalination through forward osmosis. In: ACS Applied Materials and Interfaces, 11 (7). pp. 7566-7575.

Padmavathy, N and Chakraborty, I and Kumar, A and Roy, A and Bose, S and Chatterjee, K (2021) Fe3O4@Ag and Ag@Fe3O4 Core–Shell Nanoparticles for Radiofrequency Shielding and Bactericidal Activity. In: ACS Applied Nano Materials, 5 (1). pp. 237-248.

Padmavathy, N and Chakraborty, I and Kumar, A and Roy, A and Bose, S and Chatterjee, K (2022) Fe3O4@Ag and Ag@Fe3O4 Core–Shell Nanoparticles for Radiofrequency Shielding and Bactericidal Activity. In: ACS Applied Nano Materials, 5 (1). pp. 237-248.

Padmavathy, N and Chakraborty, I and Kumar, A and Roy, A and Bose, S and Chatterjee, K (2021) Fe3O4@Ag and Ag@Fe3O4Core-Shell Nanoparticles for Radiofrequency Shielding and Bactericidal Activity. In: ACS Applied Nano Materials .

Padmavathy, Nagarajan and Das Ghosh, Lopamudra and Meka, Sai Rama Krishna and Chatterjee, Kaushik (2018) Synthesis of a Block Copolymer Exhibiting Cell-Responsive Phytochemical Release for Cancer Therapy. In: ACS APPLIED MATERIALS & INTERFACES, 10 (26). pp. 21816-21824.

Padmavathy, Nagarajan and Das Ghosh, Lopamudra and Sharma, Maya and Remanan, Sanjay and Chatterjee, Kaushik and Bose, Suryasarathi (2018) Ultra-Sensitive Detection of Proteins Using Chemically Modified Nanoporous PVDF Membrane with Attenuated Near IR Autofluorescence. In: CHEMISTRYSELECT, 3 (13). pp. 3839-3847.

Padmavathy, Nagarajan and Jaidev, LR and Bose, Suryasarathi and Chatterjee, Kaushik (2017) Oligomer-grafted graphene in a soft nanocomposite augments mechanical properties and biological activity. In: Materials & Design, 126 . pp. 238-249. ISSN 02641275

Padmavathy, Nagarajan and Samantaray, Paresh Kumar and Das Ghosh, Lopamudra and Madras, Giridhar and Bose, Suryasarathi (2017) Selective cleavage of the polyphosphoester in crosslinked copper based nanogels: enhanced antibacterial performance through controlled release of copper. In: NANOSCALE, 9 (34). pp. 12664-12676.

Padrnanabhan, K and Kishore, * (1995) Interlaminar shear of woven fabric Kevlar-epoxy composites in three-point loading. In: Materials Science & Engineering A, 197 (1). pp. 113-118.

Padukone, Usha S and Natarajan, KA (2011) Microbially induced separation of quartz from calcite using Saccharomyces cerevisiae. In: Colloids and Surfaces B: Biointerfaces, 88 (1). pp. 45-50.

Pahal, Suman and Gakhar, Ruchi and Raichur, Ashok M and Varma, Manoj M (2017) Polyelectrolyte multilayers for bio-applications: recent advancements. In: IET NANOBIOTECHNOLOGY, 11 (8). pp. 903-908.

Pahal, Suman and Raichur, Ashok M and Varma, Manoj M (2016) Subdiffraction-Resolution Optical Measurements of Molecular Transport in Thin Polymer Films. In: LANGMUIR, 32 (22). pp. 5460-5467.

Pai, BC and Rohatgi, PK and Venkatesha, S (1974) Wear resistance of cast graphitic aluminium alloys. In: Wear, 30 (1). pp. 117-125.

Pakrashi, Sunandan and Dalai, Swayamprava and Prathna, TC and Trivedi, Shruti and Myneni, Radhika and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Cytotoxicity of aluminium oxide nanoparticles towards fresh water algal isolate at low exposure concentrations. In: Aquatic Toxicology, 132 . pp. 34-45.

Pakrashi, Sunandan and Jain, Nitin and Dalai, Swayamprava and Jayakumar, Jerobin and Chandrasekaran, Prathna Thanjavur and Raichur, Ashok M. and Chandrasekaran, Natarajan and Mukherjee, Amitava (2014) In Vivo Genotoxicity Assessment of Titanium Dioxide Nanoparticles by Allium cepa Root Tip Assay at High Exposure Concentrations. In: PLOS ONE, 9 (2).

Pal, S and Lahiri, AK (2006) An overview of mathematical model of liquid iron making processes. In: Tranascation of the Indian Institute of Metals, 59 (5). pp. 569-581.

Pal, Gostabehari and Watson, Herbert Edmeston (1914) VI. On the radioactivity of the rocks of the Kolar Gold-Fields. In: Philosophical Magazine Series 6, 28 (163). pp. 44-51.

Pal, S and Babu, PN and Gargeya, BSK and Becquart, CS (2020) Molecular Dynamics simulation based investigation of possible enhancement in strength and ductility of nanocrystalline aluminum by CNT reinforcement. In: Materials Chemistry and Physics, 243 .

Pal, S and Jayaram, V (2018) Effect of microstructure on the hardness and dry sliding behavior of electroless Ni–B coating. In: Materialia, 4 . pp. 47-64.

Pal, Soupitak and Sarkar, Rohit and Jayaram, Vikram (2018) Characterization of Thermal Stability and High-Temperature Tribological Behavior of Electroless Ni-B Coating. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3217-3236.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Pal, Subrata and Lahiri, Ashok Kumar (2003) Mathematical model of COREX melter gasifier: Part I. Steady-state model. In: Metallurgical and Materials Transactions B, 34 (1). pp. 103-114.

Pal, Subrata and Lahiri, Ashok Kumar (2003) Mathematical model of COREX melter gasifier: Part II. Dynamic model. In: Metallurgical and Materials Transactions B, 34 (1). pp. 115-119.

Palani, GS and Dattaguru, B and Iyer, NR (2005) Fracture analysis of cracked plate panels using NI-MVCCI technique. In: 4th Conference on Creep, Fatique and Creep-Fatique Internation, OCT 08-10, 2003, Kalpakkam, INDIA.

Palanisamy, Dhanalakshmi and Madras, Giridhar and Chattopadhyay, Kamanio (2017) Exploring the pathways for enhancing the hard magnetic properties of binary Al-55at.%Mn Heusler alloy through mechanical alloying. In: Journal of Magnetism and Magnetic Materials, 439 . pp. 181-187. ISSN 03048853

Palanisamy, Dhanalakshmi and Singh, Shailesh and Srivastava, Chandan and Madras, Giridhar and Chattopadhyay, Kamanio (2016) Predicting Pathways for Synthesis of Ferromagnetic tau Phase in Binary Heusler Alloy Al-55 pct Mn Through Understanding of the Kinetics of epsilon-tau Transformation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (12). pp. 6555-6568.

Palanisamy, Dhanalakshmi and Srivastava, Chandan and Madras, Giridhar and Chattopadhyay, Kamanio (2017) High-temperature transformation pathways for metastable ferromagnetic binary Heusler (Al-55 at.%Mn) alloy. In: JOURNAL OF MATERIALS SCIENCE, 52 (7). pp. 4109-4119.

Palanisamy, Prakash and Raichur, Ashok M (2008) Biosurfactant mediated synthesis of NiO nanorods. In: Materials Letters, 62 (4-5). pp. 743-746.

Palanisamy, Prakash and Raichur, Ashok M (2008) Corrigendum to "Biosurfactant mediated synthesis of NiO nanorods" [Materials Letters, Volume 62, Issues 4–5, 2008, pp. 743–746]. In: Materials Letters, 62 (20). p. 3606.

Palanisamy, Prakash and Raichur, Ashok M (2009) Synthesis of spherical NiO nanoparticles through a novel biosurfactant mediated emulsion technique. In: Materials Science and Engineering C, 29 (01). pp. 199-204.

Palit, Mithun and Banumathy, S and Singh, AK and Pandian, S and Chattopadhyay, K (2011) Crystallography of solid-liquid interface and evolution of texture during directional solidification of Tb0.3Dy0.7Fe1.95 alloy. In: Intermetallics, 19 (3). pp. 357-368.

Palit, Mithun and Banumathy, S and Singh, AK and Pandian, S and Chattopadhyay, Kamanio (2016) Orientation Selection and Microstructural Evolution in Directionally Solidified Tb0.3Dy0.7Fe1.95. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (4). pp. 1729-1739.

Palit, Mithun and Pandian, S and Chattopadhyay, Kamanio (2012) Phase relationships and magnetic properties of TbxDy1-xFe1.95 alloys. In: Journal of Alloys and Compounds, 541 . pp. 297-304.

Pan, J and Surappa, MK and Saravanan, RA and Liu, BW and Yang, DM (1998) Fabrication and characterization of $SiC/MoSi_2 $composites. In: Materials Science and Engineering A, 244 (02). pp. 191-198.

Panchal, A and Behera, SK and Nath, B and Ramamurthy, PC (2022) Influence of thin-film processing on the performance of organic field-effect transistors. In: Journal of Applied Physics, 132 (5).

Panchal, A and Malik, A and Nath, B and Ramamurthy, PC (2022) Conducting Polymer based Field-Effect Transistor for Volatile Organic Compound Sensing. In: 2022 IEEE International Conference on Flexible and Printable Sensors and Systems, FLEPS 2022, 10 - 13 July 2022, Vienna.

Panda, PK and Verma, A and Jain, A and Raikwar, S and Jain, SK (2024) Theranostic nanocarriers for cancer applications. [Book Chapter]

Panda, S and Sahoo, SK and Dash, A and Bagwan, M and Kumar, G and Mishra, SC and Suwas, S (2014) Orientation dependent mechanical properties of commercially pure (cp) titanium. In: MATERIALS CHARACTERIZATION, 98 . pp. 93-101.

Panda, Subrata and Banerjee, Dipankar and Avadhani, GS and Suwas, Satyam (2018) A variant selection mechanism in the deformed and recrystallized matrix of a metastable -titanium alloy. In: PHILOSOPHICAL MAGAZINE LETTERS, 98 (7). pp. 273-282.

Pandey, DK and Das, P (2024) Three-Dimensional Micromechanical Modelling of Deformation Behaviour of Rheocast A356 Alloy. In: International Journal of Metalcasting .

Pandey, DK and Das, P (2024) A phenomenological constitutive model of Novel Rheo Gravity Die Cast Al-15Mg2Si-4.5Si-0.01Sr-0.015B composite. In: Materials Today Communications, 38 .

Pandey, K and Basu, S and V, G and Potnis, A and Chattopadhyay, K (2020) Self-tuning and topological transitions in a free-falling nanofuel droplet flame. In: Combustion and Flame, 220 . pp. 144-156.

Pandey, Khushboo and Chattopadhyay, Kamanio and Basu, Saptarshi (2017) Combustion dynamics of low vapour pressure nanofuel droplets. In: PHYSICS OF FLUIDS, 29 (7).

Pandey, P and Heczko, M and Khatavkar, N and Mazumder, N and Sharma, A and Singh, A and Mills, MJ and Chattopadhyay, K (2023) On the faulting and twinning mediated strengthening and plasticity in a γʹ strengthened CoNi-based superalloy at room temperature. In: Acta Materialia, 252 .

Pandey, P and Kashyap, S and Tiwary, C S and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.

Pandey, P and Kashyap, S and Tiwary, CS and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.

Pandey, P and Makineni, SK and Samanta, A and Sharma, A and Das, SM and Nithin, B and Srivastava, C and Singh, AK and Raabe, D and Gault, B and Chattopadhyay, K (2019) Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure. In: Acta Materialia, 163 . pp. 140-153.

Pandey, P and Mazumder, N and Singh, MP and Patil, C and Sharma, A and Makineni, SK and Banerjee, D and Chattopadhyay, K (2021) Design of low mass density γ/γ� CoNi-based superalloys with promising high-temperature mechanical properties. In: Physical Review Materials, 5 (9).

Pandey, P and Pantawane, MV and Baler, N and Ravi, R and Makineni, SK and Chattopadhyay, K (2022) Effect of Cr addition on the γ′ strengthened CoNiCrAlMo compositionally complex alloy. In: Materials Science and Technology (United Kingdom) .

Pandey, P and Sawant, AK and Nithin, B and Peng, Z and Makineni, SK and Gault, B and Chattopadhyay, K (2019) On the effect of Re addition on microstructural evolution of a CoNi-based superalloy. In: ACTA MATERIALIA, 168 . pp. 37-51.

Pandey, P and Shankar Prasad, A and Baler, N and Chattopadhyay, K (2021) On the effect of Ti addition on microstructural evolution, precipitate coarsening kinetics and mechanical properties in a Co�30Ni�10Al�5Mo�2Nb alloy. In: Materialia, 16 .

Pandey, P and Shankar Prasad, A and Baler, N and Chattopadhyay, K (2021) On the effect of Ti addition on microstructural evolution, precipitate coarsening kinetics and mechanical properties in a Co–30Ni–10Al–5Mo–2Nb alloy. In: Materialia, 16 .

Pandey, P and Tiwary, CS and Chattopadhyay, K (2018) Effects of Cu and In Trace Elements on Microstructure and Thermal and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 48 (5). pp. 2660-2669. (In Press)

Pandey, P and Tiwary, CS and Chattopadhyay, K (2016) Effects of Minute Addition of Ni on Microstructure and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 45 (10). pp. 5468-5477.

Pandey, P. and Makineni, S.K. and Gault, B. and Chattopadhyay, K. (2019) On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition. In: Acta Materialia, 170 . pp. 205-217.

Pandey, Prafull and Kashyap, Sanjay and Palanisamy, Dhanalakshmi and Sharma, Amit and Chattopadhyay, Kamanio (2019) On the high temperature coarsening kinetics of gamma ` precipitates in a high strength Co37.6Ni35.4Al9.9Mo4.9Cr5.9Ta2.8Ti3.5 fcc-based high entropy alloy. In: ACTA MATERIALIA, 177 . pp. 82-95.

Pandey, Rishikesh and Narayan, Bastola and Khatua, Dipak Kumar and Tyagi, Shekhar and Mostaed, Ali and Abebe, Mulualem and Sathe, Vasant and Reaney, Ian M. and Ranjan, Rajeev (2018) High electromechanical response in the non morphotropic phase boundary piezoelectric system PbTiO3-Bi(Zr1/2Ni1/2)O-3. In: PHYSICAL REVIEW B, 97 (22).

Pandian, Velayuthan and Mohapatra, Yashowanta N and Kumar, Vikram (1991) Silver- and Gold-Related Deep Levels in Gallium Arsenide. In: Japanese Journal of Applied Physics, 30 (11A). 2815 -2818.

Pandit, Shashidhara S and Jacob, KT (1986) Vanadium-oxygen equilibrium in liquid cobalt at 1873 K. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 556-561.

Pandit, SS and Jacob, KT (1989) Experimental and Computational Characterization of Alloy--Spinel--Corundum Equilibrium in the System Fe--Co--Al--O at 1873K. In: Scandinavian Journal of Metallurgy, 18 (2). pp. 73-80.

Pandit, SS and Jacob, KT (1990) Experimental and Computational Characterization of Alloy-Spinel-Corundum Equilibrium in the System NI-CO-AL-O AT 1873 K. In: Canadian Metallurgical Quarterly, 29 (1). pp. 21-26.

Pandit, SS and Jacob, KT (1995) Phase relations in the system MgO-SiO2-ZrO2 at 1700 K. In: Metallurgical and Materials Transactions A, 26 (2). pp. 397-399.

Pandit, SS and Jacob, KT (1994) Phase-relations in the system CAO-SIO2-ZRO2 AT 1573-K. In: Steel Research, 65 (10). 410-413 .

Pandit, SS and Jacob, KT (1987) Spinel deoxidation equilibria in the Fe Mn Al O system - experiments and computation. In: Steel Research, 58 (3). pp. 105-110.

Pandit, SS and Jacob, KT (1995) Thermodynamic properties of magnesium phosphate (Mg3P2O8) - correction of data in recent compilations. In: Metallurgical and materials transactions. A, 26A (1). pp. 225-227.

Pandit, SS and Jacob, KT (1995) Thermodynamic properties of magnesium phosphate (Mg3P2O8)�Correction of data in recent compilations. In: Metallurgical and Materials Transactions A, 26 (1). 225-227 .

Pandit, Shashidhara S and Jacob, KT (1988) Measurement and modeling of Alloy-Spinel-Corundum equilibrium in the Ni-Mn-Al-0 system at 1873 K. In: Metallurgical and Materials Transactions B, 19 (3). pp. 459-463.

Pandit, Shashidhara S and Weyl, Axel and Janke, Dieter (1994) High-temperature ionic and electronic conduction in zirconate and hafnate compounds. In: Solid State Ionics, 69 (2). pp. 93-99.

Pandiyarajan, T and Karthikeyan, B and Venkatesan, P and Ashok, M and Anandan, S and Giridharan, NV (2009) Simple synthesis and spectroscopic studies on cobalt added ZnO nanocrystals. In: Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 74 (1). pp. 84-86.

Panicker, MRR and Chokshi, AH (2011) Influence of grain size on high temperature fracture in a Mg AZ31 alloy. In: Materials Science and Engineering A, 528 (7-8). pp. 3031-3036.

Panicker, R and Chokshi, AH and Mishra, RK and Verma, R and Krajewski, PE (2009) Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy. In: Acta Materialia, 57 (13). pp. 3683-3693.

Panidhara, KM and Ramamurthy, PC (2021) Development of low power laser in-situ thickness measurement for correlating the dust thickness to the PV performance. In: Cleaner Engineering and Technology, 5 .

Panidhara, Kumar Molahalli and Jagdish, Anakkavoor Krishnaswamy and Kesavan, Arul Varman and Ramamurthy, Praveen C (2019) Omnidirectional sub-bandgap photo-detection using functionalized moulded composite flexible platforms. In: OPTICAL MATERIALS, 88 . pp. 359-365.

Panigrahi, A and Acharya, TS and Sengupta, P and Kumar, D and Sarangi, L and Kumar, N and Debasish, D and Suwas, S and Basu, S and Debata, M (2022) Microstructure and mechanical properties of novel tungsten heavy alloys prepared using FeNiCoCrCu HEA as binder. In: Materials Science and Engineering A, 832 .

Parameswaran, G and Jayaram, V and Kailas, Kailas (2023) Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding. In: Lubricants, 11 (9).

Parameswaran, G and Jayaram, V and Kailas, SV (2024) Predicting Low Sliding Friction in Al-Steel Reciprocating Sliding Experiment after a Controlled Grinding of the Steel Counterface. In: Lubricants, 12 (8).

Parameswaran, Ramesh Narayanan and Satyam, Suwas and Prasad, Sinha Parmeshwar and Srinivasa, Ranganathan (2015) Evolution of texture and its influence on the failure of components in some aluminium alloys. In: 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM 17), AUG 24-29, 2014, Dresden, GERMANY.

Parasuram, S and Banerjee, P and Raj, R and Kumar, S and Bose, S (2023) Electrophoretically Deposited Multiscale Graphene Oxide/Carbon Nanotube Construct Mediated Interfacial Engineering in Carbon Fiber Epoxy Composites. In: ACS Applied Materials and Interfaces, 15 (23). pp. 28581-28593.

Parida, SC and Dash, S and Singh, Z and Prasad, R and Jacob, KT and Venugopal, V (2002) Thermodynamic studies on NdFeO3(s). In: Journal of Solid State Chemistry, 164 (1). pp. 34-41.

Parida, SC and Jacob, KT and Venugopal, V (2002) System Dy-Fe-O: thermodynamic properties of ternary oxides using Calvet calorimetry and solid-state electrochemical cell. In: Solid State Sciences, 4 (10). pp. 1245-1255.

Parida, SC and Jacob, KT and Venugopal, V (2003) Thermodynamic properties of SmFeO3(S) and SM3R5O12(S). In: Journal of Phase Equilibria, 24 (5). pp. 431-440.

Pariyar, A and John, A and Perugu, CS and Edachery, V and Kailas, SV (2023) Influence of laser beam welding parameters on the microstructure and mechanical behavior of Inconel X750 superalloy. In: Manufacturing Letters, 35 . pp. 33-38.

Pariyar, A and Perugu, CS and Abhishek, BM and Toth, LS and Kailas, SV (2023) In-situ polymer-derived SiOC strengthened aluminum sheets: Investigations on its manufacturing and structure-property correlations. In: Materialia, 30 .

Pariyar, A and Perugu, CS and Toth, LS and Kailas, SV (2021) Microstructure and mechanical behavior of polymer-derived in-situ ceramic reinforced lightweight aluminum matrix composite. In: Journal of Alloys and Compounds, 880 .

Pariyar, A and Yasa, E and Sharman, A and Perugu, CS and Yuan, L and Hughes, J and Guan, D (2024) Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing. In: Materials and Design, 245 .

Pariyar, A. and Edachery, V. and Abhishek, B.M. and Perugu, C.S. and Rajneesh, H. and Kailas, S.V. (2020) In-situ interfacial growth of TiAl intermetallic and its influence on microparticle dislodgement during abrasive wear of Al/Ti6Al4V composite. In: Materials Today Communications, 24 .

Park, Jin Man and Mattern, Norbert and Kuehn, Uta and Eckert, Juergen and Kim, Ki Buem and Kim, Won Tae and Chattopadhyay, Kamanio and Kim, Do Hyang (2009) High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. In: Journal of Materials Research, 24 (8). 2605 -2609.

Partha, Patra and Natarajan, KA (2004) Microbially enhanced removal of pyrite and chalcopyrite from oxide gangue minerals with reference to desulfurization of tailings. In: Minerals and Metallurgical Processing, 21 (4). pp. 169-178.

Parvathy, PA and Ajisafe, VA and Raichur, AM and Sahoo, SK (2024) Dual responsive curcumin loaded N-isopropylacrylamide/acrylated linseed oil copolymeric hydrogel films: tuned LCST with value-added properties. In: New Journal of Chemistry .

Parvathy, PA and Ayobami, AV and Raichur, AM and Sahoo, SK (2021) Methacrylated alkali lignin grafted P(Nipam-Co-AAc) copolymeric hydrogels: Tuning the mechanical and stimuli-responsive properties. In: International Journal of Biological Macromolecules, 192 . pp. 180-196.

Parveen, Ameena and Anilkumar, Koppalkar R and Patil, Shantala D and Roy, Aashis S (2013) PEO|Sncl(2)|PANI composites: as an electrolyte in solid-state battery. In: IONICS, 19 (1). pp. 91-97.

Parveen, Ameena and Dashpande, Raghunandan and Ahmed, Shakeel and Roy, Aashis S (2013) Synthesis, characterisation, and DC conductivity of polyaniline-lead oxide composites. In: CHEMICAL PAPERS, 67 (3). pp. 350-356.

Parveen, Ameena and Koppalkar, Anilkumar and Roy, Aashis S (2013) Liquefied Petroleum Gas Sensing of Polyaniline-Titanium Dioxide Nanocomposites. In: SENSOR LETTERS, 11 (2). pp. 242-248.

Parveen, Ameena and Koppalkar, Anilkumar R and Roy, Aashis S (2012) Surface Modified CaTiO3 Loaded in Polyaniline by Sodium Dodecyl Benzene Sulphonic Acid for Humidity Sensor. In: IEEE SENSORS JOURNAL, 12 (9). pp. 2817-2823.

Patel, Manish and Prasad, Bhanu VV and Jayaram, Vikram (2013) Heat conduction mechanisms in hot pressed ZrB2 and ZrB2-SiC composites. In: Journal of the European Ceramic Society, 33 (10). pp. 1615-1624.

Patel, Manish and Reddy, JJ and Prasad, Bhanu VV and Subrahmanyam, J and Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB2) after exposure to high temperatures. In: Materials Science and Engineering: A, 535 . pp. 189-196.

Patel, Manish and Reddy, Janardhan J and Prasad, Bhanu VV and Jayaram, Vikram (2012) Strength of hot pressed ZrB2-SiC composite after exposure to high temperatures (1000-1700 degrees C). In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 32 (16). pp. 4455-4467.

Patel, Manish and Singh, V and Reddy, JJ and Prasad, Bhanu VV and Jayaram, Vikram (2013) Densification mechanisms during hot pressing of ZrB2-20 vol.% SiC composite. In: SCRIPTA MATERIALIA, 69 (5). pp. 370-373.

Patel, Subodh Nath and Jayaram, Vikram and Banerjee, Dipankar (2017) Thick coatings of porous zirconia by anodization of zirconium in an organic electrolyte. In: SURFACE & COATINGS TECHNOLOGY, 323 . pp. 2-9.

Paterson, Alisa R and Nagata, Hajime and Tan, Xiaoli and Daniels, John E and Hinterstein, Manuel and Ranjan, Rajeev and Groszewicz, Pedro B and Jo, Wook and Jones, Jacob L (2018) Relaxor-ferroelectric transitions: Sodium bismuth titanate derivatives. In: MRS BULLETIN, 43 (8). pp. 600-606.

Pathak, Binita and Xavier, Priti and Bose, Suryasarathi and Basu, Saptarshi (2016) Thermally induced phase separation in levitated polymer droplets. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (47). pp. 32477-32485.

Pathan, S and Dinesh, D and Biswas, K and Palsule, S (2022) Recycled wood fiber reinforced chemically functionalized polyethylene (VLDPE) composites by Palsule process. In: Journal of Natural Fibers .

Pathan, S and Islam, SS and Sen Gupta, R and Maity, B and Reddy, PR and Mandal, S and Anki Reddy, K and Bose, S (2023) Fundamental Understanding of Ultrathin, Highly Stable Self-Assembled Liquid Crystalline Graphene Oxide Membranes Leading to Precise Molecular Sieving through Non-equilibrium Molecular Dynamics. In: ACS Nano, 17 (8). pp. 7272-7284.

Pathan, Shabnam and Ahmad, Sharif (2018) Green and sustainable anticorrosive coating derived from waterborne linseed alkyd using organic-inorganic hybrid cross linker. In: PROGRESS IN ORGANIC COATINGS, 122 . pp. 189-198.

Pathan, Shabnam and Jalal, Misna and Prasad, Sanjay and Bose, Suryasarathi (2019) Aggregation-induced enhanced photoluminescence in magnetic graphene oxide quantum dots as a fluorescence probe for As(iii) sensing. In: JOURNAL OF MATERIALS CHEMISTRY A, 7 (14). pp. 8510-8520.

Patil, A and Davidson Jebaseelan, D and Bomze, D and Gopal, V (2023) Wear behaviour of lithography ceramic manufactured dental zirconia. In: BMC Oral Health, 23 (1).

Patil, D and Golia, V and Overland, M and Stoller, M and Chatterjee, K (2023) Mechanobactericidal Nanotopography on Nitrile Surfaces toward Antimicrobial Protective Gear. In: ACS Macro Letters . pp. 227-233.

Patil, D and Overland, M and Stoller, M and Chatterjee, K (2021) Bioinspired nanostructured bactericidal surfaces. In: Current Opinion in Chemical Engineering, 34 .

Patil, JV and Mali, SS and Rondiya, SR and Dzade, NY and Hong, CK (2024) Bilayered graded phase homojunction FA0.15MA0.85PbI3-based organic-inorganic hybrid perovskite solar cells crossing 22 efficiency. In: Progress in Solid State Chemistry .

Patnaik, MNM and Narasimhan, R and Ramamurty, U (2004) Spherical indentation response of metallic glasses. In: Acta Materialia, 52 (11). pp. 3335-3345.

Patnaik, S and Row, TNG and Raghunathan, L and Devi, A and Goswami, J and Shivashankar, SA and Chandrasekaran, S and Robinson, WT (1996) Low-temperature structure of two copper-based precursors for MOCVD: Aquabis(tert-butyl acetoacetato)copper(II) and Bis(dipivaloylmethanido)copper(II). In: Acta Crystallographica Section C, 52 (part 4). pp. 891-894.

Patra, B and Hegde, R and Natarajan, A and Deb, D and Sachdeva, D and Ravishankar, N and Kumar, K and Gautam, GS and Senguttuvan, P (2024) Stabilizing Multi-Electron NASICON-Na1.5V0.5Nb1.5(PO4)3 Anode via Structural Modulation for Long-Life Sodium-Ion Batteries. In: Advanced Energy Materials, 14 (17).

Patra, B and Kumar, K and Deb, D and Ghosh, S and Gautam, GS and Senguttuvan, P (2023) Unveiling a high capacity multi-redox (Nb5+/Nb4+/Nb3+) NASICON-Nb2(PO4)3 anode for Li- and Na-ion batteries. In: Journal of Materials Chemistry A, 11 (15). pp. 8173-8183.

Patra, P and Natarajan, KA (2003) Microbially-induced flocculation and flotation for pyrite separation from oxide gangue minerals. In: Minerals Engineering, 16 (10). pp. 965-973.

Patra, Partha and Natarajan, KA (2004) Microbially induced flocculation and flotation for separation of chalcopyrite from quartz and calcite. In: International Journal of Mineral Processing, 74 (1-4). pp. 143-155.

Patra, Partha and Natarajan, KA (2004) Microbially induced flotation and flocculation of pyrite and sphalerite. In: Colloids and Surfaces B: Biointerfaces, 36 (2). pp. 91-99.

Patra, Partha and Natarajan, KA (2008) Microbially-induced separation of chalcopyrite and galena. In: Minerals Engineering, 21 (10). pp. 691-698.

Patra, Partha and Natarajan, KA (2008) Role of mineral specific bacterial proteins in selective flocculation and flotation. In: International Journal of Mineral Processing, 88 (1-2). pp. 53-58.

Patra, Partha and Natarajan, KA (2008) Synthesis of Mineral-specific Bioproteins for Selective Mineral Flotation. In: Proceedings of XXIV International Mineral Processing Congress, Beijing (IMPC-2008).

Patra, S and Verma, D and Kole, AK and Tiwary, CS and Kundu, D and Chaudhuri, S and Kumbhakar, P (2017) Optical, structural properties and antibacterial activities of uncapped and HMT capped ZnO nanoparticles. In: Materials Today Communications, 12 . pp. 133-145. ISSN 23524928

Patra, Sudipta and Ghosh, Abhijit and Singhal, Lokesh Kumar and Podder, Arijit Saha and Sood, Jagmohan and Kumar, Vinod and Chakrabarti, Debalay (2017) Hot Deformation Behavior of As-Cast 2101 Grade Lean Duplex Stainless Steel and the Associated Changes in Microstructure and Crystallographic Texture. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (1). pp. 294-313.

Patro, Debdutt and Jayaram, Vikram (2008) Kinetics of Pressureless Infiltration of Al-Mg Melts into Porous Alumina Preforms. In: Metallurgical and Materials Transactions B, 39 (1). pp. 108-115.

Paul, A (2009) Comments on "Room temperature interfacial reactions in electrodeposited Au/Sn couples". In: Scripta Materialia, 61 (6). pp. 561-563.

Paul, A (2013) Comments on ``Enhanced growth of the Ni3Sn4 phase at the Sn/Ni interface subjected to strains''. In: SCRIPTA MATERIALIA, 68 (6). pp. 440-441.

Paul, A (2011) Growth mechanism of phases, Kirkendall voids, marker plane position, and indication of the relative mobilities of the species in the interdiffusion zone. In: Journal of Materials Science: Materials in Electronics, 22 (7). pp. 833-837.

Paul, A and Divinski, S (2017) Handbook of Solid State Diffusion. [Book Chapter]

Paul, A and Divinski, S (2017) Handbook of Solid State Diffusion: Diffusion Fundamentals and Techniques: Volume 1. Elsevier, pp. 1-527. ISBN 978-012804360-8, 978-012804287-8

Paul, A and Ghosh, C and Boettinger, WJ (2011) Diffusion Parameters and Growth Mechanism of Phases in the Cu-Sn System. In: Metallurgical and Materials Transactions A, 42A (4). pp. 952-963.

Paul, A and Kodentsov, AA and Loo, van FJJ (2006) Physico-chemical analysis of compound growth in a diffusion couple with two-phase end-members. In: Intermetallics, 14 (12). pp. 1428-1432.

Paul, A and Laurila, T (2012) Comments on ``Effects of current density on the formation and microstructure of Sn-9Zn, Sn-8Zn-3Bi and Sn-3Ag-0.5Cu solder joints''. In: Intermetallics, 28 . pp. 164-165.

Paul, A and Laurila, T and Divinski, S (2017) Defects, Driving Forces and Definitions of Diffusion Coefficients in Solids. [Book Chapter]

Paul, Aloke (2017) Comments on “Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys” by K.Y. Tsai, M.H. Tsai and J.W. Yeh, Acta Materialia 61 (2013) 4887–4897. In: Scripta Materialia, 135 . pp. 153-157. ISSN 13596462

Paul, Aloke (2013) Discussion of ``The Development of the Concept of Vacancy-Mediated Substitutional Diffusion: The Important Contribution from Fredrick Seitz''. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (13). pp. 5622-5624.

Paul, Aloke (2017) Estimation of Diffusion Coefficients in Binary and Pseudo-Binary Bulk Diffusion Couples. [Book Chapter]

Paul, Aloke (2017) Microstructural Evolution by Reaction–Diffusion: Bulk, Thin Film, and Nanomaterials. [Book Chapter]

Paul, Aloke (2013) A pseudobinary approach to study interdiffusion and the Kirkendall effect in multicomponent systems. In: Philosophical Magazine, 93 (18). pp. 2297-2315.

Paul, Aloke and Laurila, Tomi and Divinski, Sergiy (2017) Defects, Driving Forces and Definitions of Diffusion Coefficients in Solids. [Book Chapter]

Paul, Arindam and Jayaram, Vikram (2011) Deformation and structural densification in Al2O3-Y2O3 glass. In: Acta Materialia, 59 (1). pp. 82-92.

Paul, Ida Evangeline and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2016) Fluorometric sensing of endotoxin based on aggregation of CTAB capped gold nanospheres. In: JOURNAL OF LUMINESCENCE, 178 . pp. 106-114.

Paul, Ida Evangeline and Rajeshwari, A and Prathna, TC and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2015) Colorimetric detection of melamine based on the size effect of AuNPs. In: ANALYTICAL METHODS, 7 (4). pp. 1453-1462.

Paul, Ida Evangeline and Rajeshwari, A and Satija, Jitendra and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2016) Fluorescence Based Study for Melamine Detection Using Gold Colloidal Solutions. In: JOURNAL OF FLUORESCENCE, 26 (6). pp. 2225-2235.

Paul, R and Chatterjee, D and Das Ghosh, L and Narayanswamy, V and Singh, MP and Agarwal, M and Ghosh, D and Radhakrishna, M and Tiwary, CS and Provazník, I and Chattopadhyay, K (2023) Synthesis, characterization and In-vitro studies of CNT/Gd2O3 hybrid structure. In: Carbon Trends, 11 .

Paul, Rima and Sen, Pintu and Das, I (2016) Effect of morphology on the magnetic properties of Gd2O3 nanotubes. In: PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 80 . pp. 149-154.

Paul, Tanaji and Paul, Aloke (2015) Interdiffusion in the Ni-Zr System. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 36 (4). pp. 381-389.

Pavithra, MK and Venkatesha, TV and Kumar, Punith MK and Anantha, NS (2016) Electrochemical, gravimetric and quantum chemical analysis of mild steel corrosion inhibition by colchicine in 1 M HCl medium. In: RESEARCH ON CHEMICAL INTERMEDIATES, 42 (3). pp. 2409-2428.

Pavithra, MK and Venkatesha, TV and Kumar, Punith MK and Anantha, NS (2015) Synergistic effect of colchicine and iodide ions on the corrosion of mild steel in 0.5 M H2SO4. In: RESEARCH ON CHEMICAL INTERMEDIATES, 41 (8). pp. 5781-5796.

Pavithra, MK and Venkatesha, TV and Kumar, Punith MK and Manjunatha, K (2015) Investigation of the inhibition effect of ibuprofen triazole against mild steel corrosion in an acidic environment. In: RESEARCH ON CHEMICAL INTERMEDIATES, 41 (10). pp. 7163-7177.

Pavithra, MK and Venkatesha, TV and Kumar, Punith MK and Manjunatha, K (2015) Investigation of the inhibition effect of ibuprofen triazole against mild steel corrosion in an acidic environment (vol 41, pg 7163, 2015). In: RESEARCH ON CHEMICAL INTERMEDIATES, 41 (11). pp. 9145-9151.

Pavithra, N and Varshney, R and Naik, TSSK and Singh, S and Ramamurthy, PC (2022) Electrochemical detection of catechol using biochar/copper oxide nanoparticles layered at carbon paste electrode. In: 2022 IEEE International Conference on Emerging Electronics, 11 - 14 Dec 2022, Bangalore.

Pawar, Shital P and Gandi, Mounika and Saraf, Chinmay and Bose, Suryasarathi (2016) Polycarbonate Composites Containing Carbon Encapsulated ``Brick-Like'' Fe3O4 Nanoparticles as Efficient Microwave Absorbers with a Large Bandwidth. In: CHEMISTRYSELECT, 1 (13). pp. 3829-3838.

Pawar, Shital Patangrao and Arjmand, Mohammad and Gandi, Mounika and Bose, Suryasarathi and Sundararaj, Uttandaraman (2016) Critical insights into understanding the effects of synthesis temperature and nitrogen doping towards charge storage capability and microwave shielding in nitrogen-doped carbon nanotube/polymer nanocomposites. In: RSC ADVANCES, 6 (68). pp. 63224-63234.

Pawar, Shital Patangrao and Arjmand, Mohammad and Poetschke, Petra and Krause, Beate and Fischer, Dieter and Bose, Suryasarathi and Sundararaj, Uttandaraman (2018) Tuneable Dielectric Properties Derived from Nitrogen-Doped Carbon Nanotubes in PVDF-Based Nanocomposites. In: ACS OMEGA, 3 (8). pp. 9966-9980.

Pawar, Shital Patangrao and Bhingardive, Viraj and Jadhav, Ajinkya and Bose, Suryasarathi (2015) An efficient strategy to develop microwave shielding materials with enhanced attenuation constant. In: RSC Advances, 5 (109). pp. 89461-89471.

Pawar, Shital Patangrao and Biswas, Sourav and Kar, Goutam Prasanna and Bose, Suryasarathi (2016) High frequency millimetre wave absorbers derived from polymeric nanocomposites. In: POLYMER, 84 . pp. 398-419.

Pawar, Shital Patangrao and Bose, Suryasarathi (2016) Extraordinary Synergy in Attenuating Microwave Radiation with Cobalt-Decorated Graphene Oxide and Carbon Nanotubes in Polycarbonate/Poly(styrene-co-acrylonitrile) Blends. In: CHEMNANOMAT, 1 (8). pp. 603-614.

Pawar, Shital Patangrao and Bose, Suryasarathi (2015) Peculiar morphological transitions induced by nanoparticles in polymeric blends: retarded relaxation or altered interfacial tension? In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (22). pp. 14470-14478.

Pawar, Shital Patangrao and Gandi, Mounika and Arief, Injamamul and Krause, Beate and Poetschke, Petra and Bose, Suryasarathi (2017) Graphene Derivatives Doped with Nickel Ferrite Nanoparticles as Excellent Microwave Absorbers in Soft Nanocomposites. In: CHEMISTRYSELECT, 2 (21). pp. 5984-5999.

Pawar, Shital Patangrao and Gandi, Mounika and Bose, Suryasarathi (2016) High performance electromagnetic wave absorbers derived from PC/SAN blends containing multiwall carbon nanotubes and Fe3O4 decorated onto graphene oxide sheets. In: RSC ADVANCES, 6 (44). pp. 37633-37645.

Pawar, Shital Patangrao and Gandi, Mounika and Saraf, Chinmay and Bose, Suryasarathi (2016) Exceptional microwave absorption in soft polymeric nanocomposites facilitated by engineered nanostructures. In: JOURNAL OF MATERIALS CHEMISTRY C, 4 (22). pp. 4954-4966.

Pawar, Shital Patangrao and Kumar, Sachin and Jain, Shubham and Gandi, Mounika and Chatterjee, Kaushik and Bose, Suryasarathi (2017) Synergistic interactions between silver decorated graphene and carbon nanotubes yield flexible composites to attenuate electromagnetic radiation. In: NANOTECHNOLOGY, 28 (2).

Pawar, Shital Patangrao and Kumar, Sachin and Misra, Anupam and Deshmukh, Subrajeet and Chatterjee, Kaushik and Bose, Suryasarathi (2015) Enzymatically degradable EMI shielding materials derived from PCL based nanocomposites. In: RSC ADVANCES, 5 (23). pp. 17716-17725.

Pawar, Shital Patangrao and Marathe, Dhruva A and Pattabhi, K and Bose, Suryasarathi (2015) Electromagnetic interference shielding through MWNT grafted Fe3O4 nanoparticles in PC/SAN blends. In: JOURNAL OF MATERIALS CHEMISTRY A, 3 (2). pp. 656-669.

Pawar, Shital Patangrao and Pattabhi, K and Bose, Suryasarathi (2014) Assessing the critical concentration of NH2 terminal groups on the surface of MWNTs towards chain scission of PC in PC/SAN blends: effect on dispersion, electrical conductivity and EMI shielding. In: RSC ADVANCES, 4 (36). pp. 18842-18852.

Pawar, Shital Patangrao and Stephen, Samuel and Bose, Suryasarathi and Mittal, Vikas (2015) Tailored electrical conductivity, electromagnetic shielding and thermal transport in polymeric blends with graphene sheets decorated with nickel nanoparticles. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (22). pp. 14922-14930.

Pawbake, A and Rondiya, S and Late, D and Prasad, M and Jadkar, S (2023) Hot wire-CVD grown molybdenum disulfide (MoS2) thin films for photodetector and humidity sensing applications. In: Journal of Materials Science: Materials in Electronics, 34 (17).

Pawlas-Foryst, E and Jacob, KT and Fitzner, K (2006) Thermodynamics of GdMnO3 and GdMn2O5 phases determined by the EMF method. In: Archives Of Metallurgy And Materials, 51 (3). pp. 481-488.

Pawlas-Foryst, E and Jacob, KT and Fitzner, K (2006) Thermodynamics of SmMnO3 and SmMn2O5 phases determined by the E.M.F. method. In: Archives of Metallurgy and Materials, 51 (2). pp. 253-260.

Perugu, CS and Cheksa, EM and Mohan, MS and Femi, OE and Padaikathan, P (2022) Influence of cold rolling and thermal treatment on microstructure and texture evolution, and tensile behaviour of high strength Al-Co-Sc-Zr alloys. In: Journal of Alloys and Compounds, 907 .

Perugu, CS and Kumar, S and Suwas, S (2020) Evolution of Microstructure, Texture, and Tensile Properties in Two-Phase Mg-Li Alloys: Effect of Zn Addition. In: JOM, 72 (4). pp. 1627-1637.

Perugu, CS and Verma, KK and Madhu, HC and Pambannan, P (2021) Microstructural and Texture Evolution of Hot-Rolled TA32 Alloy and Its Effect on Tensile Properties. In: JOM .

Petric, A and Jacob, KT (1985) The Co Cr S ternary diagram at 1223 K and applications to corrosion. In: Metallurgical and Materials Transactions A, 16 (4). pp. 503-510.

Petric, A and Jacob, KT (1982) Inter and intra crystalline ion exchange equilibria in the system Fe Cr Al O. In: Solid State Ionics, 6 (1). pp. 47-56.

Petric, A and Jacob, KT (1982) Thermodynamic properties of Fe3O4 FeV2O4 and Fe3O4 FeCr2O4 spinel solid solutions. In: Journal of the American Ceramic Society, 65 (2). pp. 117-123.

Petric, A and Jacob, KT and Alcock, CB (1981) Thermodynamic properties of Fe3O4 FeAl2O4 spinel solid solution. In: Journal of the American Ceramic Society, 64 (11). pp. 632-639.

Phanikumar, G and Dutta, P and Chattopadhyay, K (2005) Continuous welding of Cu-Ni dissimilar couple using $CO_{2}$ laser. In: Science and Technology of Welding and Joining, 10 (2). pp. 158-166.

Phanikumar, G and Chattopadhyay, K (2001) Solidification microstructure development. In: Sadhana, 26 (1&2). pp. 25-34.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2011) Joining of dissimilar metals: issues and modelling techniques. In: Science and Technology of Welding & Joining, 16 (4). pp. 313-317.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2000) Supercomputing applications in materials engineering. In: Current Science, 78 (7). pp. 847-849.

Phanikumar, G and Manjini, S and Dutta, P and Mazumder, J and Chattopadhyay, K (2005) Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple. In: Metallurgical and Materials Transactions A, 36A (8). pp. 2137-2147.

Phanikumar, Gandham and Biswas, Krishanu and Funke, Oliver and Holland-Moritz, Dirk and Herlach, Dieter M and Chattopadhyay, Kamanio (2005) Solidification of undercooled peritectic Fe-Ge alloy. In: Acta Materialia, 53 (13). pp. 3591-3600.

Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.

Phaniraj, M and Shamasundar, S and Lahiri, AK (2001) Relevance of ROT control for hot rolled low carbon steels. In: Steel Research, 72 (5-6). pp. 221-224.

Phaniraj, MP and Lahiri, AK (2008) Constitutive equation for elevated temperature flow behavior of plain carbon steels using dimensional analysis. In: Materials & Design, 29 (3). pp. 734-738.

Phaniraj, MP and Lahiri, AK (2004) Constitutive model for vanadium microalloyed steel under hot working conditions. In: Materials Science and Technology, 20 (9). pp. 1151-1157.

Phaniraj, MP and Lahiri, AK (2004) Constitutive modelling of carbon and alloy steels. In: Materials Science and Technology, 20 (3). pp. 335-338.

Phaniraj, MP and Prasad, MJNV and Chokshi, AH (2007) Grain-size distribution effects in plastic flow and failure. In: Materials Science and Engineering A, 463 (1-2). pp. 231-237.

Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2005) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill - Part I. Prediction of rolling loads and finish rolling temperature. In: Journal of Materials Processing Technology, 170 (1&2). pp. 323-335.

Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2006) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill Part-II. Microstructure evolution. In: Journal of Materials Processing Technology, 178 (1-3). pp. 388-394.

Phaniraj, Prabhakar Madakasira and Lahiri, Ashok Kumar (2003) The applicability of neural network model to predict flow stress for carbon steels. In: Journal of Materials Processing Technology, 141 (2). pp. 219-227.

Pillai, Rohitkumar and Aaditya, Gayathri and Mani, Monto and Ramamurthy, Praveen (2014) Cell (module) temperature regulated performance of a building integrated photovoltaic system in tropical conditions. In: RENEWABLE ENERGY, 72 . pp. 140-148.

Pink, Erwin and Kumar, Subodh and Tian, Baohui (2000) Serrated flow of aluminium alloys influenced by precipitates. In: International-Union-of-Materials-Research-Societies International Conference on Advanced Materials (IUMRS-ICAM 99), JUN 13-18, 1999, Beijing, Peoples Republic China, pp. 17-24.

Pitchai, N and Nayak, UB and Lahiri, AK (1991) The influence of chemical additives on surface charge and hardness of hematite. In: International Journal of Mineral Processing, 31 (1-2). pp. 139-144.

Ponnada, S and Yadav, S and Gorle, DB and Kumari, I and Venkateswara Rao, B and Sharma, RK Gorle, DB, ed (2023) Introduction and Background of MXenes. CRC Press, Boca Raton, pp. 1-18. ISBN 978-100086835-7, 978-103225092-2

Ponpandian, N and Greneche, JM and Guerault, H and Nakatsuka, K and Chinnasamy, CN and Narayanasamy, A and Justin, Joseyphus R and Chattopadhyay, K and Shinoda, K and Tohji, K and Jeyadevan, B (2001) Structure and magnetic properties of nanocrystalline ferrimagnetic CdFe2O4 spinel. In: Scripta Materialia, 44 (8-9). 1411-1415 .

Ponpandian, N and Narayanasamy, A and Chattopadhyay, K and Raja, Manivel M and Ganesan, K and Chinnasamy, CN and Jeyadevan, B (2003) Low-temperature magnetic properties and the crystallization behavior of FINEMET alloy. In: Journal Of Applied Physics, 93 (10). pp. 6182-6187.

Ponpandian, N and Narayanasamy, A and Chinnasamy, CN and Sivakumar, N and Greneche, JM and Chattopadhyay, K and Shinoda, K and Jeyadevan, B and Tohji, K (2005) Neel temperature enhancement in nanostructured nickel zinc ferrite. In: Applied Physics Letters, 86 (19). pp. 192510-1.

Ponpandian, N and Narayanasamy, A and Prabhu, D and Ganesan, K and Raja, Manivel M and Chattopadhyay, K (2006) Critical phenomena in FINEMET alloy. In: Journal of Magnetism and Magnetic Materials, 296 (2). pp. 67-76.

Poobalan, RK and Singh, MP and Niranjan, K and Chattopadhyay, K and Barshilia, HC and Basu, B (2022) Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating. In: Journal of the American Ceramic Society .

Poojari, G and Kumar, H and Sampreeth, S and Tharian, T and Makineni, SK and Singh, SB and Kar, SK (2024) Effect of prior cold rolling and aging temperature on PH martensitic stainless steel: Evolution of microstructure, micro-texture and austenite stability. In: Materialia, 33 .

Poorni, S and Natarajan, KA (2013) Biomediated separation of kaolinite and hematite using Bacillus subtilis. In: 20th International Biohydrometallurgy Symposium (IBS 2013), OCT 08-11, 2013, Antofagasta, CHILE, pp. 223-226.

Poorni, S and Natarajan, KA (2014) Flocculation behaviour of hematite-kaolinite suspensions in presence of extracellular bacterial proteins and polysaccharides. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 114 . pp. 186-192.

Poorni, S and Natarajan, KA (2013) Microbially induced selective flocculation of hematite from kaolinite. In: INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 125 . pp. 92-100.

Poothanari, Mohammed Arif and Xavier, Priti and Bose, Suryasarathi and Kalarikkal, Nandakumar and Komalan, Cibi and Thomas, Sabu (2019) Compatibilising action of multiwalled carbon nanotubes in polycarbonate/polypropylene (PC/PP) blends: phase morphology, viscoelastic phase separation, rheology and percolation. In: JOURNAL OF POLYMER RESEARCH, 26 (8).

Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.

Prabhakar, Abhishek and Verma, Girish Chandra and Hariharan, Krishnasamy and Pandey, Pulak Mohan and Lee, Myoung Gyu and Suwas, Satyam (2017) Dislocation density based constitutive model for ultrasonic assisted deformation. In: MECHANICS RESEARCH COMMUNICATIONS, 85 . pp. 76-80.

Prabhakaran, DC and Krishnan, S and Ramamurthy, PC and Sivry, Y and Quantin, C and Subramanian, S (2018) Utility of Chromobacterium violaceum SUK1a, an indigenous bacterial isolate for the bioremediation of Cr(VI). In: Physicochemical Problems of Mineral Processing, 54 (4). pp. 1266-1281.

Prabhakaran, DC and Ramamurthy, PC and Sivry, Y and Subramanian, S (2020) Electrochemical detection of Cr(VI) and Cr(III) ions present in aqueous solutions using bio-modified carbon paste electrode: a voltammetric study. In: International Journal of Environmental Analytical Chemistry .

Prabhakaran, DC and Ramamurthy, PC and Sivry, Y and Subramanian, S (2020) Electrochemical detection of Cr(VI) and Cr(III) ions present in aqueous solutions using bio-modified carbon paste electrode: a voltammetric study. In: International Journal of Environmental Analytical Chemistry .

Prabhakaran, Divyasree C and Riotte, Jean and Sivry, Yann and Subramanian, Sankaran (2017) Electroanalytical Detection of Cr(VI) and Cr(III) Ions Using a Novel Microbial Sensor. In: ELECTROANALYSIS, 29 (5). pp. 1222-1231.

Prabhakaran, Divyasree C and Subramanian, S (2017) Studies on the Bioremediation of Chromium from Aqueous Solutions Using C-paurometabolum. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 70 (2). pp. 497-509.

Prabhu, Niranjana T and Rao, Jagannadha Y and Prashantha, K (2004) Studies on flocculation of clay suspension by polyacrylamide. In: E-polymers (057). p. 7.

Prabhu, D and Ganesan, K and Narayanasamy, A and Chattopadhyay, K and Ponpandian, N (2007) Magnetic properties of amorphous $Fe_{73.5}Cu_1Mo_3Si_{12.5}Al_1B_9$ alloy. In: Materials Science and Engineering A, 449-45 . pp. 452-455.

Prabhu, D and Narayanasamy, A and Chattopadhyay, K (2008) Effect of aluminum on the hyperfine field and crystallization behaviour of NANOPERM alloy. In: Hyperfine Interactions, 183 (1-3). pp. 7-15.

Prabhu, D and Narayanasamy, A and Chattopadhyay, K (2008) Effect of aluminum on the hyperfine field and crystallization behaviour of NANOPERM alloy. In: Hyperfine Interactions, 183 (1-3). pp. 7-15.

Prabhu, D and Narayanasamy, A and Ganesan, K and Ponpandian, N and Chattopadhyay, K (2007) Exchange field penetration in $Fe_{73.5}Cu_1Mo_3Si_{12.5}Al_1B_9$ alloy. In: Journal of Alloys and Compounds, 438 (1-2). pp. 15-20.

Prabhu, D and Narayanasamy, A and Shinoda, K and Jeyadeven, B and Greneche, JM and Chattopadhyay, K (2011) Grain size effect on the phase transformation temperature of nanostructured CuFe2O4. In: Journal of Applied Physics, 109 (1). 013532-1.

Prabhu, D and Narayanasmy, A and Chattopadhyay, K (2007) Effect of Al substitution on the magnetic properties of amorphous Fe73.5Cu1Mo3Si13.5-xAlxB9 alloy. In: Journal of Non-Crystalline Solids, 353 (16-17). pp. 1577-1581.

Prabhu, D and Veerababu, R and Balamuralikrishnan, R and Narayanasamy, A and Chattopadhyay, K (2012) Effect of addition of aluminum on the evolution of microstructure in HITPERM class Fe44Co44Zr7B4Cu1 alloy. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177 (11). pp. 791-796.

Prabu, S S Mani and Madhu, H C and Perugu, Chandra S and Akash, K and Kumar, P Ajay and Kailas, Satish V and Anbarasu, Manivannan and Palani, I A (2017) Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 693 . pp. 233-236.

Prabu, S S Mani and Madhu, HC and Perugu, Chandra S and Akash, K and Mithun, R and Kumar, P Ajay and Kailas, Satish and Anbarasu, Manivannan and Palani, IA (2019) Shape memory effect, temperature distribution and mechanical properties of friction stir welded nitinol. In: JOURNAL OF ALLOYS AND COMPOUNDS, 776 . pp. 334-345.

Prabu, S S Mani and Perugu, Chandra S and Madhu, H C and Jangde, Ashutosh and Khan, Sohel and Jayachandran, S and Manikandan, M and Kumar, P Ajay and Kailas, Satish and Palani, I A (2019) Exploring the functional and corrosion behavior of friction stir welded NiTi shape memory alloy. In: JOURNAL OF MANUFACTURING PROCESSES, 47 . pp. 119-128.

Pradhan, JR and Dasgupta, S (2024) Fully Printed Negative-Capacitance Field-Effect Transistors with Ultralow Subthreshold Swing and High Inverter Signal Gain. In: ACS Applied Materials and Interfaces, 16 (30). pp. 39517-39527.

Pradhan, JR and Priyadarsini, SS and Nibgoor, SR and Singh, M and Dasgupta, S (2024) Oxide semiconductor based deep-subthreshold operated read-out electronics for all-printed smart sensor patches. In: Exploration .

Pradhan, JR and Singh, M and Dasgupta, S (2022) Inkjet-Printed, Deep Subthreshold Operated Pseudo-CMOS Inverters with High Voltage Gain and Low Power Consumption. In: Advanced Electronic Materials .

Pradhan, S and Reddy, VP and Priyadarshini, M and Singhal, P and Barua, A and Behera, A and Prakash, C and Saxena, KK and Eldin, SM (2023) jou_mat_res_tec_25_2989-3006_2023. In: Journal of Materials Research and Technology, 25 . pp. 2989-3006.

Prajapat, D and Surampalli, A and Reddy, VR (2023) Study of La substituted four-layer Aurivillius compound Bi 5 FeTi 3 O 15. In: Hyperfine Interactions, 244 (1).

Prajapati, SK and Malaiya, A and Mishra, G and Jain, D and Kesharwani, P and Mody, N and Ahmadi, A and Paliwal, R and Jain, A (2022) An exhaustive comprehension of the role of herbal medicines in Pre- and Post-COVID manifestations. In: Journal of Ethnopharmacology, 296 .

Prajapati, SK and Mishra, G and Malaiya, A and Jain, A and Mody, N and Raichur, AM (2021) Antimicrobial Application Potential of Phytoconstituents from Turmeric and Garlic. [Book Chapter]

Prajapati, SK and Mishra, G and Malaiya, A and Kesharwani, P and Mody, N and Jain, A (2021) Application of Coatings with Smart Functions. In: Mini-Reviews in Organic Chemistry, 18 (7). pp. 943-960.

Prakasan, Sabari MR and Natarajan, KA (2010) Microbially induced separation of quartz from hematite using sulfate reducing bacteria. In: Colloids and Surfaces B: Biointerfaces, 78 (2). pp. 163-170.

Prakash, A and Katiyar, NK and Suarez-Villagran, MY and Miller, Jr and Machado, LD and Tiwary, CS and Biswas, K and Chattopadhyay, K (2023) Effects of size on water vapour absorption and regeneration in lithium chloride nanocrystals. In: Materials Today Communications, 36 .

Prakash, SR and Boggavarapu, P and Ravikrishna, RV (2021) Experimental Study on Secondary Breakup of Droplets at Low Density Ratios. In: UNSPECIFIED.

Pramanick, Abhijit and Chatterjee, Subhradeep and Bhattacharya, Victoria and Chattopadhyay, Kamanio (2005) Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate. In: Journal of Materials Research, 20 (6). 1580-1589 .

Pramanik, AK and Ranjan, Rajeev and Banerjee, A (2012) Evolution of structural phase coexistence in a half doped manganite Pr0.5Sr0.5MnO3: An evidence for magneto-structural coupling. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 325 . pp. 29-35.

Pramanik, S and Pund, TS and Avadhani, GS and Suwas, S (2019) Hot deformation behavior of Fe-6.8Al low-density and AISI 1040 steels. In: Materials Performance and Characterization, 8 (5).

Pramanik, S and Suwas, S (2020) Effect of Cr and Mn Addition on the Microstructure, Texture, and Mechanical Properties of Ternary Low-Density Steels. In: Journal of Materials Engineering and Performance, 29 (7). pp. 4435-4445.

Pramanik, S and Suwas, S (2022) Microstructure and Crystallographic Texture Evolution during Isothermal Annealing of Cold-Rolled Fe-6.8Al Low-Density Steel. In: Journal of Materials Engineering and Performance .

Pramanik, S and Suwas, S and Ray, RK (2014) Influence of crystallographic texture and microstructure on elastic modulus of steels. In: CANADIAN METALLURGICAL QUARTERLY, 53 (3). pp. 274-281.

Pramanik, Sudipta and Koppoju, Suresh and Anupama, AV and Sahoo, Balaram and Suwas, Satyam (2018) Strengthening mechanisms in Fe-Al based ferritic low-density steels. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 712 . pp. 574-584.

Pramanik, Sudipta and Ravikumar, K and Kalsar, Rajib and Suwas, Satyam and Basu, Bikramjit (2019) On the orientation relationships in phase transformation of CaTiO3. In: CERAMICS INTERNATIONAL, 45 (9). pp. 12509-12515.

Pramanik, Sudipta and Suwas, Satyam (2014) Low-Density Steels: The Effect of Al Addition on Microstructure and Properties. In: JOM, 66 (9). pp. 1868-1876.

Pramod, T and Sampathkumaran, P and Puneeth, N and Sailaja, RRN and Seetharamu, S and Swamy, AS and Kishore, Kishore (2021) Tribological response of polycarbonate and acrylonitrile butadiene styrene blends containing fixed amounts of Kevlar fibre and molybdenum disulphide with varying quantities of betel nut powder. In: Polymers and Polymer Composites .

Pramodh, NV and Verma, KK and Kumar, S and Suwas, S (2022) Asymmetric and Reverse Rolling of AM30 Mg Alloy to Improve Its Tensile Properties. In: Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 27 Feb - 3 Mar 2022, Anaheim, pp. 217-225.

Prasad, YVRK (1984) Texture-dependent mechanical properties of metals and alloys. In: Transactions of the Indian Institute of Metals, 37 (4). pp. 399-410.

Prasad, YVRK and Seshacharyulu, T (1998) Modelling of hot deformation for microstructural control. In: International Materials Reviews, 43 (6). pp. 243-258.

Prasad, A and Datta, S and De, S and Singh, P and Mahto, B (2024) Bioresorbable Composite for Orthopedics and Drug Delivery Applications. [Book Chapter]

Prasad, Anamika and Dao, Ming and Ramamurty, Upadrasta (2009) Effect of Dilatation on the Elasto-Plastic Response of Bulk Metallic Glasses Under Indentation. In: MRS Proceedings, 1224 .

Prasad, B and Parkin, S and Prodromakis, T and Eom, C-B and Sort, J and Macmanus-Driscoll, JL (2022) Material challenges for nonvolatile memory. In: APL Materials, 10 (9).

Prasad, Eswar K and Chollacoop, N and Ramamurty, U (2011) Role of indenter angle on the plastic deformation underneath a sharp indenter and on representative strains: An experimental and numerical study. In: Acta Materialia, 59 (11). pp. 4343-4355.

Prasad, Eswar K and Raghavan, R and Ramamurty, U (2007) Temperature dependence of pressure sensitivity in a metallic glass. In: Scripta Materialia, 57 (2). pp. 121-124.

Prasad, Eswar K and Rajesh, K and Ramamurty, U. (2014) Micropillar and macropillar compression responses of magnesium single crystals oriented for single slip or extension twinning. In: ACTA MATERIALIA, 65 . pp. 316-325.

Prasad, Eswar K and Ramamurty, U (2012) Effect of temperature on the plastic zone size and the shear band density in a bulk metallic glass. In: Materials Science and Engineering A, 535 . pp. 48-52.

Prasad, K Eswar and Keryvin, V and Ramamurty, U (2009) Pressure sensitive flow and constraint factor in amorphous materials below glass transition. In: International Symposium on Indentation Behavior of Materials, FEB, 2008, Hyderabad, pp. 890-897.

Prasad, K Eswar and Das, Barun and Maitra, Urmimala and Ramamurty, Upadrasta and Rao, CNR (2009) Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons. In: PNAS, 106 (32). pp. 13186-13189.

Prasad, KVR and Raju, AR and Varma, KBR and Satyalakshmi, KM and Mallya, RM and Hegde, MS (1993) Growth and ferroelectric properties of Bi2VO5.5 thin films with metallic LaNiO3 electrodes. In: Applied Physics Letters, 63 (14). 1898 -1900.

Prasad, KVR and Varma, KBR and Raju, AR and Satyalakshmi, KM and Mallya, RM and Hegde, MS (1993) Growth and ferroelectric properties of $Bi_2VO_{5.5}$ thin films with metallic $LaNiO_3$ electrodes. In: Applied Physics Letters, 63 (14). pp. 1898-1900.

Prasad, MJNV and Chokshi, AH (2010) Extraordinary high strain rate superplasticity in electrodeposited nano-nickel and alloys. In: Scripta Materialia, 63 (1). pp. 136-139.

Prasad, MJNV and Chokshi, AH (2011) Microstructural stability and nanoindentation of an electrodeposited nanocrystalline Ni-1.5wt.%P alloy. In: Kovové materiály / Metallic Materials, 49 (1). pp. 93-99.

Prasad, MJNV and Chokshi, AH (2011) Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni-P alloy. In: Acta Materialia, 59 (10). pp. 4055-4067.

Prasad, MJNV and Chokshi, AH (2011) On the exothermic peak during annealing of electrodeposited nanocrystalline nickel. In: Scripta Materialia, 64 (6). pp. 544-547.

Prasad, MJNV and Chokshi, AH (2010) Superplasticity in electrodeposited nanocrystalline nickel. In: Acta Materialia, 58 (17). pp. 5724-5736.

Prasad, MJNV and Ghosh, P and Chokshi, AH (2009) Synthesis, Thermal stability and Mechanical Behavior of Nano-Nickel. In: Journal of the Indian Institute of Science, 89 (1). pp. 43-48.

Prasad, MJNV and Suwas, S and Chokshi, AH (2009) Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain-size distribution. In: International Symposium on Bulk Nanostructured Materials: from Fundamentals to Innovation, BNM 2007, AUG 14-18, 2007, Ufa State Aviat Tech Univ, Ufa, Russia, pp. 86-91.

Prasad, N Subrahmanya and Narasimhan, R and Suwas, S (2018) Effect of notch acuity on the fracture behavior of AZ31 Mg alloy. In: ENGINEERING FRACTURE MECHANICS, 187 (SI). pp. 241-261.

Prasad, Natasha and Bibhanshu, Nitish and Nayan, Niraj and Avadhani, Ganesh S and Suwas, Satyam (2019) Hot deformation behavior of the high-entropy alloy CoCuFeMnNi. In: JOURNAL OF MATERIALS RESEARCH, 34 (5, SI). pp. 744-755.

Prasad, PM and Subramanian, S (1997) Problems and prospects of red mud utilisation. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 427-442.

Prasad, Ramesh GK and Chattopadhyay, K and Rao, Mohan M (1986) Structure-property correlation in dual-phase copper-tin alloys. In: Journal of Materials Science Letters, 5 (10). pp. 991-994.

Prasad, S and Paul, A (2009) Diffusion Parameters in the Nb-Mo System: Revisited. In: Metallurgical and Materials Transactions A, 40A (7). pp. 1512-1514.

Prasad, S and Paul, A (2012) Growth and consumption rates of the phase layers during interdiffusion in a diffusion couple with finite end member. In: Journal of Materials Science: Materials in Electronics, 23 (1). pp. 75-85.

Prasad, S and Paul, A (2011) Growth mechanism of phases by interdiffusion and atomic mechanism of diffusion in the molybdenum-silicon system. In: Intermetallics, 19 (8). pp. 1191-1200.

Prasad, S and Paul, A (2011) Growth mechanism of phases by interdiffusion and diffusion of species in the niobium-silicon system. In: Acta Materialia, 59 (4). pp. 1577-1585.

Prasad, S and Paul, A (2012) Growth mechanism of the Nb(X)Si-2 and [Nb(X)](5)Si-3 phases by reactive diffusion in Nb (X = Ti, Mo, or Zr)-Si systems. In: Intermetallics, 22 . pp. 210-217.

Prasad, S and Paul, A (2011) Reactive Diffusion Between Vanadium and Silicon. In: Journal of Phase Equilibria and Diffusion, 32 (3). pp. 212-218.

Prasad, S and Paul, A (2007) Theoretical consideration on the formation of nanotube following the Kirkendall effect. In: Applied Physics Letters, 90 (23). pp. 233114-3.

Prasad, Soma and Paul, Aloke (2012) Diffusion mechanism in XSi2 and X5Si3 (X= Nb, Mo, V) phases. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011, ICB Lab, Dijon, FRANCE, pp. 459-464.

Prasad, Soma and Paul, Aloke (2012) Interdiffusion in Nb-Mo, Nb-Ti and Nb-Zr systems. In: International Conference on Diffusion in Materials (DIMAT 2011), JUL 03-08, 2011 , ICB Lab, Dijon, FRANCE, pp. 491-496.

Prasad, Subrahmanya N and Kumar, Naveen N and Narasimhan, R and Suwas, S (2015) Fracture behavior of magnesium alloys - Role of tensile twinning. In: ACTA MATERIALIA, 94 . pp. 281-293.

Prasad, Subrahmanya N and Narasimhan, R and Suwas, S (2016) Numerical simulations of cylindrical void growth in Mg single crystals. In: Symposium on Ductile Failure and Localization, MAR 17-20, 2016, Maison Polytechniciens, Paris, FRANCE, pp. 159-183.

Prasad, YVRK (1996) Dynamic materials model: Basis and principles - Reply. In: Metallurgical and Materials Transactions A, 27 (1). pp. 235-236.

Prasad, YVRK (2003) Processing Maps: A Status Report. In: Journal of Materials Engineering and Performance, 12 (6). pp. 638-645.

Prasad, YVRK (1990) Recent Advances in the Science of Mechanical processing. In: Indian Journal of Technology, 28 (6-8). pp. 435-451.

Prasad, YVRK and Gegel, HL and Doraivelu, SM and Malas, JC and Morgan, JT and Lark, KA and Barker, DR (1984) Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242. In: Metallurgical and Materials Transactions A, 15 (10). pp. 1883-1892.

Prasad, YVRK and Ramchandran, T (1971) Low-temperature creep in polycrystalline α-brass. In: Scripta Metallurgica, 5 (5). pp. 411-416.

Prasad, YVRK and Rao, Rama P (1980) Alloy design for fracture resistance. In: Sadhana - Academy Proceedings in Engineering Sciences, 3 (DEC). pp. 315-331.

Prasad, YVRK and Ravichandran, N (1991) Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps. In: Bulletin of Materials Science, 14 (5). 1241 -1248.

Prasad, YVRK and Sasidhara, S and Sikka, VK (2000) Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy. In: Intermetallics, 8 (9-11). pp. 987-995.

Prasad, YVRK and Sastry, DH and Deevi, SC (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys. In: Materials Science and Engineering A, 311 (1-2). pp. 42-53.

Prasad, YVRK and Sastry, DH and Deevi, SC (2000) Processing maps for hot working of a P/M iron aluminide alloy. In: Intermetallics, 8 (9-11). pp. 1067-1074.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Effect of Stacking-Fault Energy on Thermal Activation of Attractive Junctions in Change-in-Stress Creep of FCC Metals. In: Journal of Materials Science, 5 (6). pp. 495-506.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys. In: Materials Science and Engineering, 6 (5). pp. 327-333.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) On the effect of stacking fault energy on the thermal activation of attractive juntions in the low-temperature creep of F.C.C. metals. In: Scripta Metallurgica, 4 (3). pp. 219-220.

Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The mechanism of hardening in quenched Al---0.5%Mg alloy at 86°K. In: Scripta Metallurgica, 3 (2). pp. 103-106.

Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The nature of thermal activation of attractive junctions in the low-temperature creep of quenched aluminium and aluminium-magnesium alloys. In: Scripta Metallurgica, 3 (11). pp. 771-775.

Prasad, YVRK and Seshacharyulu, T (1998) Processing maps for hot working of titanium alloys. In: Materials Science and Engineering A, 243 (1-2). pp. 82-88.

Prasad, YVRK and Seshacharyulu, T and Medeiros, SC and Frazier, WG (2001) A Study of Beta Processing of Ti-6Al-4V: Is it Trivial? In: Journal of Engineering Materials and Technology, 123 (3). pp. 355-360.

Prasad, YVSS and Rao, P Ramachandra and Chattopadhyay, K (1984) The nature of non-equilibrium solidification of undercooled Agsingle bondCu alloys in contact with primary copper dendrites. In: Acta Metallurgica, 32 (10). pp. 1825-1828.

Prashanth, Gurusiddappa R and Goudar, Venkanagouda S and Raichur, Ashok M and Varma, Manoj M (2013) Enhancing fluorescence signals from aluminium thin films and foils using polyelectrolyte multilayers. In: Sensors and Actuators B: Chemical, 183 . pp. 496-503.

Prashanth, Gurusiddappa R and Goudar, Venkanagouda S and Suran, Swathi and Raichur, Ashok M and Varma, Manoj M (2012) Non-covalent functionalization using lithographically patterned polyelectrolyte multilayers for high-density microarrays. In: SENSORS AND ACTUATORS B-CHEMICAL, 171 . pp. 315-322.

Prashanth, KK and Chattopadhyay, K and Majumder, J (1999) An investigation on the laser surface alloying of copper on iron. In: Journal of Materials Science, 34 (14). pp. 3437-3445.

Pratap Singh, Akhand and Gupta, Abhay and Sai Jyotheender, K and Srivastava, Chandan (2022) Effect of Zn Incorporation on the Evolution of Texture, Strain, Grain Boundary Constitution, and Corrosion Behavior of Electrodeposited SnZn Coatings. In: Metallurgical and Materials Transactions A . ISSN 1073-5623

Prateek, P and Bhunia, R and Garg, A and Gupta, RK (2020) Probing the Interface Activation in Designing Defect-Free Multilayered Polymer Nanocomposites for Dielectric Capacitor Applications. In: Journal of Physical Chemistry C .

Prateek, P and Siddiqui, S and Bhunia, R and Singh, N and Garg, A and Gupta, RK (2020) Interface modulation in multi-layered BaTiO3nanofibers/PVDF using the PVP linker layer as an adhesive for high energy density capacitor applications. In: Materials Advances, 1 (4). pp. 680-688.

Prathna, TC and Chandrasekaran, N and Raichur, Ashok M and Mukherjee, Amitava (2011) Biomimetic synthesis of silver nanoparticles by Citrus limon (lemon) aqueous extract and theoretical prediction of particle size. In: Colloids and Surfaces B: Biointerfaces, 82 (1). pp. 152-159.

Prathna, TC and Chandrasekaran, N and Raichur, Ashok M and Mukherjee, Amitava (2011) Kinetic evolution studies of silver nanoparticles in a bio-based green synthesis process. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 377 (1-3). pp. 212-216.

Prathna, TC and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Heat mediated synthesis of silver nanoparticles using citrus limon (lemon) extract. In: Asian Journal of Chemistry, 25 (S). S305-S307.

Prathna, TC and Raichur, Ashok M and Chandrasekaran, N and Mukherjee, Amitava (2013) Process Development for Functionalization of Cotton with Silver Nanoparticles Synthesized by Bio-based Approaches. In: CURRENT NANOSCIENCE, 9 (4). pp. 479-488.

Praveen, S and Basu, Joysurya and Kashyap, Sanjay and Kottada, Ravi Sankar (2016) Exceptional resistance to grain growth in nanocrystalline CoCrFeNi high entropy alloy at high homologous temperatures. In: JOURNAL OF ALLOYS AND COMPOUNDS, 662 . pp. 361-367.

Praveena, K and Bharathi, P and Liu, Hsiang Lin and Varma, K B R (2016) Structural, multiferroic properties and enhanced magnetoelectric coupling in Sm1-xCaxFeO3. In: CERAMICS INTERNATIONAL, 42 (12). pp. 13572-13585.

Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.

Praveena, Manimunda and Guha, Kaustav and Ravishankar, Abhilash and Biswas, Sanjay K and Bain, Colin D and Jayaram, Vikram (2014) Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. In: RSC ADVANCES, 4 (42). pp. 22205-22213.

Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.

Praveenkumar, K and Sudhagara Rajan, S and Swaroop, S and Manivasagam, G (2023) Laser shock peening: a promising tool for enhancing the aeroengine materials’ surface properties. In: Surface Engineering .

Praveenkumar, K and Swaroop, S and Manivasagam, G (2023) Effect of multiple laser shock peening without coating on residual stress distribution and high temperature dry sliding wear behaviour of Ti-6Al-4 V alloy. In: Optics and Laser Technology, 164 .

Praveenkumar, K and Vishnu, J and Raheem, A and Gopal, V and Swaroop, S and Suwas, S and Shankar, B and Manivasagam, G (2024) In-vitro fretting tribocorrosion and biocompatibility aspects of laser shock peened Ti-6Al-4V surfaces. In: Applied Surface Science, 665 .

Praveenkumar, K and Vishnu, J and Samuel S, C and Gopal, V and Arivarasu, M and Lackner, JM and Meier, B and Karthik, D and Suwas, S and Swaroop, S and Prashanth, KG and Yadav, MK and Manivasagam, G (2024) High temperature dry sliding wear behaviour of selective laser melted Ti-6Al-4V alloy surfaces. In: Journal of Materials Processing Technology, 329 .

Preetha, P and Thomas, Joy M and Ranjan, Rajeev (2012) Electrothermal Ageing of Epoxy Nanocomposites. In: IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 19 (6). pp. 2081-2089.

Priya, Shashank and Jacob, KT (2000) Activities and Immiscibility in the System Cu-Rh. In: Journal of Phase Equilibria, 21 (04). p. 342.

Priya, Angel J and Vijayalakshmi, SP and Raichui, Ashok M (2011) Enhanced Survival of Probiotic Lactobacillus acidophilus by Encapsulation with Nanostructured Polyelectrolyte Layers through Layer-by-Layer Approach. In: Journal of Agricultural and Food Chemistry, 59 (21). pp. 11838-11845.

Priya, Neela D and Modak, Jayant M and Raichur, Ashok M (2009) LbL Fabricated Poly(Styrene Sulfonate)/TiO2 Multilayer Thin Films for Environmental Applications. In: Acs Applied Materials & Interfaces, 1 (11). pp. 2684-2693.

Priya, Neela D and Modak, Jayant M and Trebse, Polonca and Zabar, Romina and Raichur, Ashok M (2011) Photocatalytic degradation of dimethoate using LbL fabricated TiO2/polymer hybrid films. In: Journal of Hazardous Materials, 195 . pp. 214-222.

Priyadarshini, M and Kumari, K and Pradhan, S and Barua, A (2024) Ceramics-based antiwear coatings for friction stir welding tools: A review. [Book Chapter]

Priyadarsini, SS and Dasgupta, S (2022) Room temperature fabrication of MnO2-based printable and flexible microsupercapacitors. In: 2022 IEEE International Conference on Emerging Electronics, ICEE 2022, 11-14 Dec 2022, Bangalore.

Priyadarsini, SS and Saxena, S and Ladole, AH and Nehru, D and Dasgupta, D (2023) Inkjet-Printed Transparent Asymmetric Microsupercapacitors with Mesoporous NiCo2O4 and Mn2O3 Electrodes. In: ACS Applied Energy Materials .

Priyadarsini, SS and Saxena, S and Pradhan, JR and Dasgupta, S (2022) Inkjet-printed transparent micro-supercapacitors with morphology tailored co-continuous mesoporous Mn3O4. In: Journal of Materials Chemistry A .

Priydarshini, Geetha B and Esakkiraja, N and Aich, Shampa and Chakraborty, M (2016) Resputtering Effect on Nanocrystalline Ni-Ti Alloy Films. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (4). pp. 1751-1760.

Pugazhendhi, Bhagat Singh and Kar, Amlan and Sinnaeruvadi, Kumaran and Suwas, Satyam (2018) Effect of aluminium on microstructure, mechanical property and texture evolution of dual phase Mg-8Li alloy in different processing conditions. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 18 (4). pp. 1332-1344.

Pulakkat, Sreeranjini and Balaji, Sai A and Rangarajan, Annapoorni and Raichur, Ashok M (2016) Surface Engineered Protein Nanoparticles With Hyaluronic Acid Based Multilayers For Targeted Delivery Of Anticancer Agents. In: ACS APPLIED MATERIALS & INTERFACES, 8 (36). pp. 23437-23449.

Pulikkalparambil, H and Rangappa, SM and Pongprayoon, T and Siengchin, S and Lal, J and Krishnasamy, S and Saravana Kumar, M and Parameswaranpillai, J (2023) Epoxy Nanocomposites for Fire-Retardant Applications. [Book Chapter]

Punith Kumar, MK and Laxmeesha, PM and Ray, S and Srivastava, C (2020) Enhancement in the corrosion resistance of nanocrystalline aluminium coatings by incorporation of graphene oxide. In: Applied Surface Science, 533 .

Punith Kumar, MK and Rekha, MY and Srivastava, C (2021) Electrogalvanization using new generation coatings with carbonaceous additives: Progress and challenges. In: Corrosion Reviews, 39 (01). pp. 15-26.

Purohit, Ravi Raj Purohit Purushottam Raj and Arya, Abhinav and Bojjawar, Girish and Pelerin, Maxime and Van Petegem, Steven and Proudhon, Henry and Mukherjee, Soham and Gerard, Celine and Signor, Loic and Mocuta, Cristian and Casati, Nicola and Suwas, Satyam and Chokshi, Atul H and Thilly, Ludovic (2019) Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction. In: SCIENTIFIC REPORTS, 9 .

Puthirath Balan, A and Radhakrishnan, S and Kumar, R and Neupane, R and Sinha, SK and Deng, L and De Los Reyes, CA and Apte, A and Rao, BM and Paulose, M and Vajtai, R and Chu, CW and Costin, G and Martí, AA and Varghese, OK and Singh, AK and Tiwary, CS and Anantharaman, MR and Ajayan, PM (2018) A Non-van der Waals Two-Dimensional Material from Natural Titanium Mineral Ore Ilmenite. In: Chemistry of Materials, 30 (17). pp. 5923-5931.

Q

Qian, X and Cao, QP and Liu, SY and Wang, C and Wang, XD and Zhang, DX and Ramamurty, U and Jiang, JZ (2015) Dependence of shear yield strain and shear transformation zone on the glass transition temperature in thin film metallic glasses. In: JOURNAL OF ALLOYS AND COMPOUNDS, 652 . pp. 191-199.

R

R, Goswami and K, Chattopadhyay (1993) The superheating of Pb embedded in a Zn matrix the role of interface melting. In: Philosophical Magazine Letters, 68 (4). pp. 215-223.

RK, Mandal and S, Lele and S, Ranganathan (1993) Twinning of quasicrystals and related structures. In: Philosophical Magazine Letters, 67 (4). pp. 301-305.

Radhakrishna Bhat , BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014---20vol.%Al2O3 metal matrix composite. In: Materials Science and Engineering: A, 212 (1). 178-181 .

Radhakrishnan, Krishna and Gupta, Satyajit and Gnanadhas, Divya Prakash and Ramamurthy, Praveen C and Chakravortty, Dipshika and Raichur, Ashok M (2014) Protamine-Capped Mesoporous Silica Nanoparticles for Biologically Triggered Drug Release. In: PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION, 31 (4). pp. 449-458.

Radhakrishnan, Krishna and Raichur, Ashok M (2012) Biologically triggered exploding protein based microcapsules for drug delivery. In: Chemical Communications, 48 (17). pp. 2307-2309.

Radhakrishnan, Krishna and Thomas, Midhun B and Pulakkat, Sreeranjini and Gnanadhas, Divya P and Chakravortty, Dipshikha and Raichur, Ashok M (2016) Stimuli-responsive protamine-based biodegradable nanocapsules for enhanced bioavailability and intracellular delivery of anticancer agents. In: JOURNAL OF NANOPARTICLE RESEARCH, 17 (8).

Radhakrishnan, Krishna and Thomas, Midhun B and Pulakkat, Sreeranjini and Gnanadhas, Divya P and Chakravortty, Dipshikha and Raichur, Ashok M (2015) Stimuli-responsive protamine-based biodegradable nanocapsules for enhanced bioavailability and intracellular delivery of anticancer agents. In: JOURNAL OF NANOPARTICLE RESEARCH, 17 (8).

Radhakrishnan, Krishna and Tripathy, Jasaswini and Datey, Akshay and Chakravortty, Dipshikha and Raichur, Ashok M (2015) Mesoporous silica-chondroitin sulphate hybrid nanoparticles for targeted and bio-responsive drug delivery. In: NEW JOURNAL OF CHEMISTRY, 39 (3). pp. 1754-1760.

Radhakrishnan, Krishna and Tripathy, Jasaswini and Gnanadhas, Divya P and Chakravortty, Dipshikha and Raichur, Ashok M (2014) Dual enzyme responsive and targeted nanocapsules for intracellular delivery of anticancer agents. In: RSC ADVANCES, 4 (86). pp. 45961-45968.

Radhakrishnan, Krishna and Tripathy, Jasaswini and Raichur, Ashok M (2013) Dual enzyme responsive microcapsules simulating an ``OR'' logic gate for biologically triggered drug delivery applications. In: Chemical Communications, 49 (47). pp. 5390-5392.

Radhika, V and Subramanian, S and Natarajan, KA (2006) Bioremediation of zinc using Desulfotomaculum nigrificans: Bioprecipitation and characterization studies. In: Water Research, 40 (19). pp. 3628-3636.

Radojevic, BB and Chattopadhyay, Kamanio and Bhattacharya, P and Davidovic, M (1998) On the stability and structure of Zr-Cu and Zr-Ti-Cu alloys. In: Solid State Phenomena, 61-2 . pp. 109-113.

Raghavan, R and Ayer, R and Jin, HW and Marzinsky, CN and Ramamurty, U (2008) Effect of shot peening on the fatigue life of a Zr-based bulk metallic glass. In: Scripta Materialia, 59 (2). pp. 167-170.

Raghavan, R and Boopathy, K and Ghisleni, R and Pouchon, MA and Ramamurty, U and Michler, J (2010) Ion irradiation enhances the mechanical performance of metallic glasses. In: Scripta Materialia, 62 (7). pp. 462-465.

Raghavan, R and Kombaiah, B and Doebeli, M and Erni, R and Ramamurty, U and Michler, J (2012) Nanoindentation response of an ion irradiated Zr-based bulk metallic glass. In: Materials Science and Engineering A, 532 . pp. 407-413.

Raghavan, R and Murali, P and Ramamurty, U (2008) Influence of Cooling Rate on the Enthalpy Relaxation and Fragility of a Metallic Glass. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Raghavan, R and Murali, P and Ramamurty, U (2009) On factors influencing the ductile-to-brittle transition in a bulk metallic glass. In: Acta Materialia, 57 (11). pp. 3332-3340.

Raghavan, R and Murali, p and Ramamurty, U (2006) Ductile to brittle transition in the $Zr_4_1_._2Ti_1_3_._7_5Cu_1_2_._5Ni_1_0Be_2_2_._5$ bulk metallic glass. In: Intermetallics, 14 (8-9). pp. 1051-1054.

Raghavan, R and Ramamurty, U and Basu, J and Ranganathan, S and Nishiyama, N (2003) Structural Relaxation and Crystallization in a Pd40Cu30Ni10P20 Bulk Metallic Glass. In: MRS Proceedings, 806 . MM9.6.

Raghavan, R and Shastry, VV and Kumar, A and Jayakumar, T and Ramamurty, U (2009) Toughness of as-cast and partially crystallized composites of a bulk metallic glass. In: Intermetallics, 17 (10). pp. 835-839.

Raghavan, S and Hajra, JP and Abraham, KP and Iyengar, GNK (1991) Terminal solid solubilities at 900–1000°C in the magnesium oxide-zinc oxide system measured using a magnesium fluoride solid-electrolyte galvanic cell. In: Thermochimica Acta, 189 (1). pp. 151-158. (In Press)

Raghavana, S and Iyengar, GNK and Abraham, KP (1985) Determination of the thermodynamic properties of \{xMgO + (1 - x)MnO\} (s, sln) from a solid-electrolyte galvanic cell in the temperature range 1163 to 1318 K. In: The Journal of Chemical Thermodynamics, 17 (6). pp. 585-591.

Raghavendra, SM and Kumaraswamy, MN and Nagarsha, KM and Sharanakumar, TM and Ramamurthy, PC and Latha, KP (2023) DESIGN, SYNTHESIS, MOLECULAR DOCKING, AND ANTIMICROBIAL STUDY ON NAPHTHOFURAN DERIVATIVES. In: Rasayan Journal of Chemistry, 16 (3). pp. 1613-1623.

Raghupathy, Y and Kamboj, Anshul and Rekha, M Y and Rao, Narasimha N P and Srivastava, Chandan (2017) Copper-graphene oxide composite coatings for corrosion protection of mild steel in 3.5% NaCl. In: THIN SOLID FILMS, 636 . pp. 107-115.

Raghupathy, Y and Natarajan, K A and Srivastava, Chandan (2017) Microstructure, electrochemical behaviour and bio-fouling of electrodeposited nickel matrix-silver nanoparticles composite coatings on copper. In: SURFACE & COATINGS TECHNOLOGY, 328 . pp. 266-275.

Raghupathy, Y and Natarajan, KA and Srivastava, Chandan (2016) Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 206 . pp. 1-8.

Raghupathy, Y and Natarajan, KA and Srivastava, Chandan (2016) Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 206 . pp. 1-8.

Raghuraman, Mathangi and Sambandan, Sanjiv and Yadav, Saritha (2015) Large Area Flexible Electronics for Analog Mode Continuous Time Applications. In: IEEE International Conference on Electronics Computing and Communication Technologies (CONECCT), JUL 10-11, 2015, Bangalore, INDIA.

Rahane, GK and Singh, B and Roy, A and Saykar, NG and Mandal, A and Afria, D and Jadhav, YA and Mali, SS and Dzade, NY and Rondiya, SR (2024) Tailoring Interface via Tuning the Phase and Morphology of TiO2 for Efficient Mesoporous Perovskite Solar Cells. In: Langmuir, 40 (43). 22526 -22539.

Rahman, SA and Chandraker, A and Prakash, O and Chauhan, A (2024) Data-driven machine learning approach for predicting dwell fatigue life in two classes of Titanium alloys. In: Engineering Fracture Mechanics, 306 .

Rai, RK and Singh, Pratap M and Srivastava, C (2014) Synthesis and characterization of Ag-Co-Ni nanowires. In: JOURNAL OF MICROSCOPY, 255 (3). pp. 169-173.

Rai, RK and Srivastava, C (2021) Synthesis and Mechanism of Formation of Non-equilibrium Ag�Ni Nanotubes. In: Metallography, Microstructure, and Analysis .

Rai, Rajesh K and Srivastava, Chandan (2015) Nonequilibrium Microstructures for Ag-Ni Nanowires. In: MICROSCOPY AND MICROANALYSIS, 21 (2). pp. 491-497.

Raichur, AM (2006) Recent advances in biohydrometallurgy. In: Proceedings of Symposium on Emerging Trends in Separation Science and Technology SESTEC-2006, September 29-October1 2006, Mumbai.

Raichur, AM and Basu, Jyoti M (2001) Adsorption of fluoride onto mixed rare earth oxides. In: Separation and Purification Technology, 24 (1-2). pp. 121-127.

Raichur, AM and Panvekar, V (2002) Removal of As(V) by adsorption onto mixed rare earth oxides. In: Separation Science and Technology, 37 (5). pp. 1095-1108.

Raichur, AM and Parekh, BK and Wang, XH (2001) Estimation of surface free energy of pyrites by contact angle measurements. In: Minerals Engineering, 14 (1). pp. 65-75.

Raichur, AM and Vijayalakshmi, SP (2003) The effect of nature of raw coal on the adhesion of bacteria to coal surface. In: Fuel, 82 (2). pp. 225-231.

Raichur, AM and Wang, XH and Parekh, BK (2000) Quantifying pyrite surface oxidation kinetics by contact angle measurements. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 167 (3). pp. 245-251.

Raikwar, S and Jain, A and Saraf, S and Bidla, PD and Panda, PK and Tiwari, A and Verma, A and Jain, SK (2022) Opportunities in combinational chemo-immunotherapy for breast cancer using nanotechnology: an emerging landscape. In: Expert Opinion on Drug Delivery, 19 (3). pp. 247-268.

Raikwar, S and Jain, A and Saraf, S and Tiwari, A and Panda, PK and Jain, SK (2021) Environmental stimuli-sensitive chitosan nanocarriers in therapeutics. [Book Chapter]

Raj, Markondeya P (1995) A critical assessment of the standard molar gibbs free energy of formation of NiWO4. In: Bulletin of Materials Science, 18 (5). pp. 623-630.

Raj, Markondeya P and Jacob, KT (1995) Standard molar gibbs free energies of formation of CoMoO4 and Co2Mo3O8. Consistency requirements. In: Materials Transactions, JIM, 36 (5). pp. 693-694.

Raj, Mohan P and Sarkar, S and Chakraborty, S and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. In: International Journal of Heat and Fluid Flow, 23 (3). pp. 298-307.

Raj, P and Gupta, GS and Rudolph, V (2020) Silicon carbide formation by carbothermal reduction in the Acheson process: A hot model study. In: Thermochimica Acta, 687 .

Raj, Prince and Gupta, Govind S (2020) Temperature measurements in a laboratory scale furnace for manufacturing of silicon carbide through Acheson process. In: MEASUREMENT, 151 .

Raj, R and Parasuram, S and Kumar, S and Bose, S (2023) Process dependent interface strengthening, de-icing and EMI shielding performance in PEEK/CF laminates. In: Materials Advances, 4 (18). 4180 -4189.

Raj, R and Parasuram, S and Kumar, S and Bose, S (2023) Process dependent interface strengthening, de-icing and EMI shielding performance in PEEK/CF laminates. In: Materials Advances, 4 (18). 4180 -4189.

Raj, Shammy and Kumar, Sachin and Chatterjee, Kaushik (2016) Facile synthesis of vanadia nanoparticles and assessment of antibacterial activity and cytotoxicity. In: MATERIALS TECHNOLOGY, 31 (10). pp. 562-573.

Raja, VS and Kishore, * and Ranganathan, S (1988) Effect Of Molybdenum And Silicon On The Electrochemical Corrosion Behavior Of Fenib Metallic Glasses. In: Corrosion, 44 (5). pp. 263-270.

Raja, KS and Misra, M and Raichur, AM and Kar, A (2008) Development of a novel biocompatible hydroxyapatite coated nanotubular titania for implant application. In: Proceedings of the 32nd International Conference on Advanced Ceramics and Composites, Daytona, January 26 - February 1, 2008 (Invited paper)pp 227-238, January 26 - February 1, 2008, Daytona.

Raja, Manivel M and Ponpandian, N and Majumdar, B and Narayanasamy, A and Chattopadhyay, K (2001) Soft magnetic properties of nanostructured FINEMET alloy powder cores. In: Materials Science and Engineering A, 304-30 . pp. 1062-1065.

Raja, Srinivasa V and Ranganathan, Srinivasa (1991) Crystallization characteristics of vitrovac 4040 (Fe39Ni39Mo4Si6B12). In: Zeitschrift für Metallkunde, 82 (12). pp. 907-912.

Raja, VS and Kishore, * and Ranganathan, S (1987) Crystallization behaviour of Metglas 2826 MB (Fe40Ni38Mo4B18). In: Bulletin of Materials Science, 9 (3). pp. 207-217.

Raja, VS and Kishore, * and Ranganathan, S (1990) Microstructural and kinetic aspects of devitrification of $Fe_{40}Ni_{40}B_{20}$ metallic glass. In: Journal of Materials Science, 25 (11). pp. 4667-4677.

Raja, VS and Kishore, K and Ranganathan, S (1987) Crystallization behavior of Metglas 2826 MB (iron-nickel-molybdenum-boron $(Fe_40Ni_38Mo_4B_18)$. In: Bulletin of Materials Science, 9 (3). pp. 207-217.

Rajamathi, Jacqueline T and Ahmed, Mohammed F and Ravishankar, N and Nethravathi, C and Rajamathi, Michael (2009) Anionic clay-Pt metal nanoparticle composite through intercalation of hexachloroplatinate in nickel zinc hydroxysalt. In: Solid State Sciences, 11 (7). pp. 1270-1274.

Rajani, MB and Kumar, V (2021) Where Was Odantapuri Located?: Archaeological Evidence Using Remote Sensing, GIS and Photogrammetry. In: Resonance, 26 (9). pp. 1287-1304.

Rajaram, R and Ravichandran, N and Prasad, YVRK (1994) A study of hot deformation of Cd-1% Zn alloy using power dissipation maps. In: Zeitschrift fur Metallkunde, 85 (12). pp. 845-851.

Rajaram, G and Kumaran, S and Suwas, Satyam (2011) Effect of strain rate on tensile and compression behaviour of Al-Si/graphite composite. In: Materials Science and Engineering A, 528 (19-20). pp. 6271-6278.

Rajeev, R and Islam, SS and Varghese, A and Hegde, G and Bose, S (2024) Hierarchical porous covalent organic framework-based sensor for the detection of neurodegenerative disorder biomarkers. In: Materials Chemistry and Physics, 312 .

Rajesh, G and Subramanian, S and Pillay, Anju M and Rajendra, A and Sharma, AK (2008) Studies on the effect of surfactants on the dispersion stability of PTFE suspension for Ni-PTFE composite coatings for space applications. In: Proceedings of the 24th Annual In-House Symposium on Space Science and Technology, January 2008, Bangalore.

Rajmohan, N and Jacob, KT (1992) Combined sulphation-chlorination roasting of oxides. In: Minerals Engineering, 5 (2). pp. 235-243.

Rajmohan, N and Jacob, KT (1992) Use of CaC12 as a chlorinating agent for oxides - A thermodynamic analysis. In: Minerals and Metallurgical Processing, 9 . pp. 141-145.

Rajneesh, S and Gupta, GS (2003) Importance of frictional forces on the formation of cavity in a packed bed under cross flow of gas. In: Powder Technology, 134 (1-2). pp. 72-85.

Rajneesh, S and Sarkar, S and Gupta, GS (2004) Prediction of Raceway Size in Blast Furnace from Two Dimensional Experimental Correlations. In: ISIJ International, 44 (8). pp. 1298-1307.

Rajput, M and Mandal, M and Anura, A and Mukhopadhyay, A and Subramanian, B and Paul, RR and Chatterjee, J (2020) Honey loaded silk fibroin 3D porous scaffold facilitates homeostatic full-thickness wound healing. In: Materialia, 12 .

Rajput, M and Mondal, P and Yadav, P and Chatterjee, K (2022) Light-based 3D bioprinting of bone tissue scaffolds with tunable mechanical properties and architecture from photocurable silk fibroin. In: International Journal of Biological Macromolecules, 202 . pp. 644-656.

Rajput, M and Nilawar, S and Chatterjee, K (2023) Embedding Silk Fibroin-Alginate Hydrogel in a 3D-Printed Porous Poly(Lactic Acid) Bone Tissue Scaffold Augments Stem Cell Function. In: Regenerative Engineering and Translational Medicine .

Rajput, M and Tyeb, S and Chatterjee, K (2023) Techniques to Fabricate Electrospun Nanofibers for Controlled Release of Drugs and Biomolecules. [Book Chapter]

Raju, KSS Eswar and Bysakh, S and Sumesh, MA and Kamat, SV and Mohan, S (2008) The effect of ageing on microstructure and nanoindentation behaviour of dc magnetron sputter deposited nickel rich NiTi films. In: Materials Science and Engineering A, 476 (1-2). pp. 267-273.

Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Muraleedharan, K and Gurao, NP and Wilde, G (2008) Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel. In: Materials Science and Engineering: A, 491 (1-2). pp. 1-7.

Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Sarma, Subramanya V and Gurao, NP and Wilde, G (2011) Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes. In: Journal of Materials Science , 46 (8). pp. 2662-2671.

Rama maurthy , RK and Mallikarjunan , R (1959) FLOTATION OF QUARTZ WITH SOAPS OF BOMBAX MALABARICA OIL AND SHARK LIVER OIL AS COLLECTORS. In: Journal of the Indian Institute of Science , 41 (4). pp. 30-35.

Ramachandra, S and Kumar, Sudheer P and Ramamurty, U (2003) Impact energy absorption in an Al foam at low velocities. In: Scripta Materialia, 49 (8). pp. 741-745.

Ramachandran, EG and Chinnappa, KV (2008) A Method for the Determination of Stress on Electrodeposition by using Electrical Strain Gauges The Societe Francaise de Metallurgie, LeChatelier Centenary Commemoration. In: Journal of Indian Institute of Science, 88 (3). pp. 795-803.

Ramakrishna, Rao VVVNS and Abraham, KP (1971) Kinetics of oxidation of copper sulfide. In: Metallurgical Transactions, 2 (9). pp. 2463-2470.

Ramakrishna, V (1960) The effect of temperature on the magnetic susceptibility of vanadium pentoxide systems. In: Kolloid-Zeitschrift, 173 (1). pp. 35-38.

Ramakrishnan, R and Sankarasubramanian, R and Choudhury, AN and Gururajan, MP (2024) Modeling Properties and Phenomena at High Temperatures: Atomistic and Phase-Field Approaches. [Book Chapter]

Ramakrishnan, S and Kumar, DV and Nagarajaiah, H and Saravanan, S and Ramamurthy, PC (2018) Benzimidazole/reduced graphene oxide based field effect transistor for mercury ion detection in water. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17- 19 December 2018, Bengaluru.

Ramamurthy, Praveen C and Mallya, Ashwini N and Joseph, Alex and Harrell, William R and Gregory, Richard V (2012) Synthesis and characterization of high molecular weight polyaniline for organic electronic applications. In: POLYMER ENGINEERING AND SCIENCE, 52 (8). pp. 1821-1830.

Ramamurty, U and Nagendra, N and Li, Y (2001) Variation in mechanical properties with crystallinity of a La-based bulk metallic glass. In: Metastable, Mechanically Alloyed and Nanocrystalline Materials ISMANAM - 2000. International Symposium, 9-14 July 2000, Oxford, UK, pp. 61-66.

Ramamurty, U (2005) Assessment of load transfer characteristics of a fiber-reinforced titanium-matrix composite. In: Composites Science and Technology, 65 (11-12). pp. 1815-1825.

Ramamurty, U and Bandyopadhyay, Amit and Dwarakadasa, ES (1993) Effect of heat treatment environment on Li depletion and on mechanical properties in AI-Li alloy sheets. In: Journal of Materials Science, 28 (23). pp. 6340-6346.

Ramamurty, U and Jana, S and Kawamura, Y and Chattopadhyay, K (2005) Hardness and plastic deformation in a bulk metallic glass. In: Acta Materialia, 53 (3). pp. 705-717.

Ramamurty, U and Kumaran, MC (2004) Mechanical property extraction through conical indentation of a closed-cell aluminum foam. In: Acta Materialia, 52 (1). pp. 181-189.

Ramamurty, U and Lee, ML and Basu, J and Li, Y (2002) Embrittlement of a bulk metallic glass due to low-temperature annealing. In: Scripta Materialia, 47 (2). pp. 107-111.

Ramamurty, U and Paul, A (2004) Variability in mechanical properties of a metal foam. In: Acta Materialia, 52 (4). pp. 869-876.

Ramamurty, Upadrasta and Jang, Jae-il (2014) Nanoindentation for probing the mechanical behavior of molecular crystals-a review of the technique and how to use it. In: CRYSTENGCOMM, 16 (1). pp. 12-23.

Raman, KHT and Kiran, MSRN and Ramamurty, U and Rao, Mohan G (2012) Structure and mechanical properties of Ti-C films deposited using combination of pulsed DC and normal DC magnetron co-sputtering. In: APPLIED SURFACE SCIENCE, 258 (22). pp. 8629-8635.

Raman, KS (1971) Resistometric studies of solute-vacancy interactions and clustering kinetics in an FCC matrix [AlZn Alloy with Ag, Ce, Dy, Li, Nb, Pt, Sb, Y, or Yb]. In: Scripta Metallurgica, 5 (9). pp. 791-793.

Raman, KS and Das, ESD and Vasu, KI (1973) Clustering Rate-Reversal Temperature And Other Pre-Precipitation Characteristics Of Al-Zn-Ag Alloys. In: Current Science (Bangalore), 42 (19). pp. 663-667.

Raman, KS and Das, ESD and Vasu, KI (1971) Clustering and solute-vacancy binding energies in Al-4.4% Zn alloy with 0.01% ternary additions. In: Journal of Materials Science, 6 (11). pp. 1367-1378.

Raman, KS and Das, ESD and Vasu, KI (1970) Clustering phenomena in Al-4.4 at. % Zn alloy with 0.03 and 0.08 at. % Ag additions. In: Journal of Materials Science, 5 (2). pp. 105-116.

Raman, KS and Das, ESD and Vasu, KI (1970) Reversion phenomenon in Al-4.4Zn and Al-4.4Zn-0.08Ag alloys by resistometry. In: Scripta Metallurgica, 4 (3). pp. 197-201.

Raman, KS and Das, ESD and Vasu, KI (1970) Values of Solute-Vacancy Binding Energy In Aluminium Matrix for Ag, Be, Ce, Dy, Fe, Li, Mn, Nb, Pt, Sb, Si, Y and Yb. In: Scripta Metallurgica, 4 (4). pp. 291-293.

Raman, Thulasi KH and Kiran, MSRN and Ramamurty, U and Rao, Mohan G (2012) Structural and mechanical properties of room temperature sputter deposited CrN coatings. In: MATERIALS RESEARCH BULLETIN, 47 (12). pp. 4463-4466.

Ramanarayan, H and Abinandanan, TA (2004) Grain boundary effects on spinodal decomposition II. Discontinuous microstructures. In: Acta Materialia, 52 (4). pp. 921-930.

Ramanarayan, H and Abinandanan, TA (2003) Phase field study of grain boundary effects on spinodal decomposition. In: Acta Materialia, 51 (16). pp. 4761-4772.

Ramanarayan, H and Abinandanan, TA (2003) Spinodal decomposition in fine grained materials. In: Bulletin Of Materials Science, 26 (1). pp. 189-192.

Ramanarayan, H and Abinandanan, TA (2003) Spinodal decomposition in polycrystalline alloys. In: Physica A: Statistical Mechanics and its Applications, 318 (1-2). pp. 213-219.

Ramanathan, B and Reddy, BSH and Raman, KS and Murthy, KSS and Raja, A and Raghupathy, VP and Babu, RS (1996) Effect of shielding gas on fusion characteristics and weld metal properties in flux cored arc welding. In: 4th International Conference on Trends in Welding Research, JUN 05-08, 1995, GATLINBURG, TN.

Ramani, K and Sathyavathiamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mossbauer-Effect Study Of The Thermal-Decomposition In Hydrogen Of Homogeneously Mixed Ferrous Nickel Oxalates With Different Iron To Nickel Ratios. In: Physica Status Solidi A, 77 (1). pp. 87-96.

Ramani, K and Sathyavathiyamma, MP and Puttaswamy, NG and Mallya, RM (1983) Mossbauer Effect Study of the Thermal Decomposition in Hydrogen of Homogeneously Mixed Ferrous Nickel Oxalates with Different Iron to Nickel Ratios. In: Physica Status Solidi A, 77 (1). pp. 87-96.

Ramaraju, K and Prasad, YVRK and Vasu, KI (1972) Slip structure and Crack Growth during Fatigue in Aluminum and Aluminum-1% Magnesium. In: Metallography, 5 (3). pp. 265-273.

Ramasesha, SK and Jacob, KT (1989) Studies on nonisothermal solid state galvanic cells — effect of gradients on EMF. In: Journal of Applied Electrochemistry, 19 (3). pp. 394-400.

Ramasesha, SK and Jacob, KT (1988) X-ray and IR characterisation of Nasicon solid solution, Na1+xZr2SixP3−xO12. In: Materials Letters, 7 (1-2). pp. 61-64.

Ramasesha, SK and Mathews, Tom and Jacob, KT (1990) High temperature Seebeck measurements on $YBa_2Cu_3O_{7-\delta}$. In: Materials Research Bulletin, 25 (2). pp. 149-155.

Ramasesha, SK and Mathews, Tom and Jacob, KT (1990) High temperature seebeck measurements on YBa2Cu3O7-δ. In: Materials Research Bulletin, 25 (2). pp. 149-155.

Ramasesha, Sheela K and Jacob, KT (1989) EMF of a nonisothermal cell incorporating a mixed conductor. In: Journal of the Electrochemical Society, 136 (9). pp. 2720-2723.

Ramasesha, Sheela K and Jacob, KT (1990) EMF of bielectrolyte solid state cells with different mobile ions in each phase. In: Electrochimica Acta, 35 (4). pp. 785-789.

Ramasesha, Sheela K and Jacob, KT (1990) Effect of hole localization on Madelung potential of YBa2Cu3O7. In: Materials Letters, 10 (6). pp. 239-242.

Ramasesha, Sheela K and Jacob, Thomas K (1991) Madelung energy and hole location in YBa2Cu4O8. In: Journal of Materials Chemistry, 1 (3). pp. 477-478.

Ramdas Dandekar, T and Kisni Khatirkar, R and Kumar, A and Bibhanshu, N and Suwas, S (2022) Unidirectional cold rolling of Fe-21Cr-5Mn-1.5Ni alloy � Microstructure, texture and magnetic properties. In: Journal of Magnetism and Magnetic Materials, 549 .

Ramesam, J and Rao, MR and Anantharaman, TR (1962) Electron-metallographic studies of precipitation in an aluminium-zinc-magnesium alloy. In: Proceedings of the Indian Academy of Sciences - Section A, 55 (2). pp. 121-129.

Ramesh, R and Ravikumar, K and Kishore, * (1986) Wear of En 31 steel. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 329-334.

Ramesh, R and Kishore, * and Rao, RMVGK (1983) Dry wear studies on glass-fiber-reinforced epoxy composites. In: Wear, 89 (2). pp. 131-136.

Ramesh, R and Salahuddin, S and Datta, S and Diaz, CH and Nikonov, DE and Young, IA and Ham, D and Chang, M-F and Khwa, W-S and Lele, AS and Binek, C and Huang, Y-L and Sun, Y-C and Chu, Y-H and Prasad, B and Hoffmann, M and Hu, J-M and Yao, Z and Bellaiche, L and Wu, P and Cai, J and Appenzeller, J and Datta, S and Camsari, KY and Kwon, J and Incorvia, JAC and Asselberghs, I and Ciubotaru, F and Couet, S and Adelmann, C and Zheng, Y and Lindenberg, AM and Evans, PG and Ercius, P and Radu, IP (2024) Roadmap on low-power electronics. In: APL Materials, 12 (9).

Ramkumar, KR and Menghani, J and Jha, VK and Vikram, RJ and Sivasankaran, S and Kim, HS (2022) Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod. In: Materials Characterization, 194 .

Ramkumar, KR and Park, H and Lee, J and Kwon, H and Vikram, RJ and Kim, ES and Zaragaran, A and Kim, HS (2023) Development of a novel CoCrNi-based eutectic high entropy alloy for a wide temperature range. In: Materials Science and Engineering: A, 885 .

Rana, K and Ghosh, R and Rawat, NK (2024) Recent Progress in Conducting Polymeric Films for Biomedical Application. [Book Chapter]

Ranganathan, S (1990) Coincidence-site lattices, superlattices and quasilattices. In: Transactions of the Indian Institute of Metals, 43 (1). pp. 1-7.

Ranganathan, S (2001) Yashoda's vision: Microscopy at all levels. In: Mrs Bulletin, 26 (2). p. 127.

Ranganathan, S and Alok, Singh and Mayer, J and Urban, K (1989) Electron diffraction patterns from the Al-Mn decagonal phase. In: Philosophical Magazine Letters, 60 (6). pp. 261-267.

Ranganathan, S and Chattopadhyay, K (1989) Decagonal quasicrystals. In: informaworld, 16 (1-4). pp. 67-83.

Ranganathan, S and Hajra, JP (1987) Alloy oxide equilibrium in the $Cr-Mn-O$ system. In: Bulletin of Materials Science, 9 (2). pp. 149-158.

Ranganathan, S and Lord, EA (2008) Parallelohedra and topological transitions in cellular structures. In: Philosophical Magazine Letters, 88 (9-10). pp. 703-713.

Ranganathan, S and Prasad, R and Mukhopadhyay, NK (1989) Electron microscopy and diffraction of icosahedral twins in an aluminium—manganese alloy. In: Philosophical Magazine Letters, 59 (6). pp. 257-263.

Ranganathan, S and Roy, B (1993) Coincidence site lattices revisited. In: Indo-US workshop on Interfaces, 1993, pp. 21-31.

Ranganathan, S and Singh, Alok and Mayer, J and Urban, K (1989) Electron diffraction patterns from the aluminum-manganese decagonal phase. In: Philosophical Magazine Letters, 60 (6). pp. 261-267.

Ranganathan, S and Subramaniam, A and Tsai, AP and Dong, C (2001) BCC derivative structures and their relation to rational approximants to quasicrystals. In: Aperiodic 2000 Conference, 4-8 July 2000, Nijmegen, Netherlands, pp. 201-206.

Ranganathan, S (2003) Alloyed pleasures: Multimetallic cocktails. In: Current Science, 85 (5). pp. 1404-1406.

Ranganathan, S (2001) Basic-research in engineering materials - Indian perspectives. In: Transactions of the Indian Institute of Metals, 54 (1-2). pp. 1-12.

Ranganathan, S (1999) IIM presidental address-1999 - Paradigm shifts in metallurgical research and education. In: Transactions of the Indian Institute of Metals, 52 (6). pp. 357-361.

Ranganathan, S (2000) Infrastructure in S&T in India. In: Current Science, 78 (8). p. 941.

Ranganathan, S (2001) It takes two to tango: New quasicrystals and novel superconductors. In: Current Science, 80 (6). pp. 729-732.

Ranganathan, S (1993) Quasicrystals, crystals and twins. In: Indian National Science Academy - Part A: Physical Sciences, 1993, pp. 533-548.

Ranganathan, S (1994) Quasicrystals:Indian research accomplishments and imperatives. In: Current Science (Bangalore), 67 (1). 884-886 .

Ranganathan, S and Biswas, T and Subramaniam, A (2009) Discovering and designing bulk metallic glasses. [Book Chapter]

Ranganathan, S and Divakar, R and Raghunathan, VS (2001) Interface Structures in Nanocrystalline Materials. In: Scripta Materialia, 44 (8-9). pp. 1169-1174.

Ranganathan, S and Hajra, JP (1989) Activities of manganese in Co-Mn-Cr alloys at 1323 K. In: Scripta Metallurgica, 23 (7). pp. 1049-1052.

Ranganathan, S and Hajra, JP (1988) Thermodynamic measurements of b.c.c. Cr-Mn solid solutions at 1373 K. In: Scripta Metallurgica, 22 (1). 13 -16.

Ranganathan, S and Inoue, A (2006) An application of Pettifor structure maps for the identification of pseudo-binary quasicrystalline intermetallics. In: Acta Materialia, 54 (14). pp. 3647-3656.

Ranganathan, S and Kaplan, WD (2006) Advanced Materials and Characterization: Proceedings of the Brandon Symposium. In: Journal of Materials Science, 41 (23). pp. 7667-7668.

Ranganathan, S and Lord, EA and Mukhopadhyay, NK and Singh, Alok (2007) A symmetrical indexing scheme for decagonal quasicrystals analogous to Miller-Bravais indexing of hexagonal crystals. In: Acta Crystallographica Section A, 63 (1). pp. 1-10.

Ranganathan, S and Murty, BS and Nagarajan, R and Chattopadhyay, K (1996) Nanostructured titanium-nickel alloys: a comparison of processing routes. In: Symposium on Processing and Properties of Nanocrystalline Materials, at the Materials Week 95, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.

Ranganathan, S and Ramakrishnan, K and Kulkarni, UD and Mukhopadhyay, NK (2000) On the relationship between cubic crystalline coincidence site lattices and quasiperiodic superlattices. In: Materials Science and Engineering A, 294-29 . pp. 429-433.

Ranganathan, S and Singh, Alok (1996) Indexing of decagonal quasicrystals I. The T8-phase. In: Philosophical Magazine A, 74 (4). pp. 821-840.

Ranganathan, S and Singh, Alok and Tsai, AP (2002) Frank's 'cubic' hexagonal phase: an intermetallic cluster compound as an example. In: Philosophical Magazine Letters, 82 (1). pp. 13-19.

Ranganathan, S and Singh, Alok K and Tendeloo, van G (1991) Quasicrystals and their crystalline homologues in the Al–Mn–Cu ternary alloys. In: Philosophical Magazine A , 64 (2). pp. 413-427.

Ranganathan, S and Srivastava, AK and Lord, EA (2006) Coincidence-site lattices as rational approximants to irrational twins. In: Journal of Materials Science, 41 (23). pp. 7696-7703.

Ranganathan, S and Subramaniam, Anandh (2003) Orthorhombic rational approximants for decagonal quasicrystals. In: Bulletin of Materials Science, 26 (6). pp. 627-631.

Ranganathan, S and Subramaniam, Anandh and Ramakrishnan, K (2001) Rational approximant structures to decagonal quasicrystals. In: Materials Science and Engineering A, 304-30 . pp. 888-891.

Ranganathan, Srinivasa (2008) Materials Behavior: Far from Equilibrium. In: Metallurgical and Materials Transactions A, 39A (7). p. 1479.

Ranganathana, S and Singhb, Alok and Mukhopadhyaya, NK and Weatherlya, GC (1994) A comparative study of zone axis pattern maps from decagonal phases with varying periodicity. In: Scripta Metallurgica et Materialia, 30 (3). pp. 271-276.

Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive Hot Pressing of Titanium Nitride–Titanium Diboride Composites at Moderate Pressures and Temperatures. In: Journal Of The American Ceramic Society, 87 (10). pp. 1872-1878.

Rangaraj, Lingappa and Barman, Kanika and Divakar, Canchi and Jayaram, Vikram (2013) Reactive hot pressing of Ti-B-C and Ti-C at 1200 degrees C. In: Ceramics International, 39 (5). pp. 5955-5961.

Rangaraj, Lingappa and Chakrabarti, Tamoghna and Kannan, Rajaguru and Jayaram, Vikram (2016) Effect of applied pressure on densification of monolithic ZrCx ceramic by reactive hot pressing. In: JOURNAL OF MATERIALS RESEARCH, 31 (4). pp. 506-515.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. In: Journal of the European Ceramic Society, 30 (1). pp. 129-138.

Rangaraj, Lingappa and Divakar, Canchi and Jayaram, Vikram (2010) Reactive hot pressing of ZrB2-ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. In: Journal of the European Ceramic Society, 30 (15). pp. 3263-3266.

Rangaraj, Lingappa and Suresha, Siriyara J and Divakar, Canchi and Jayaram, Vikram (2008) Low-Temperature Processing of ZrB2-ZrC Composites by Reactive Hot Pressing. In: Symposium on Materials Behavior - Far from Equilibrium, DEC 15-16, 2006, Bombay.

Ranjan, Rajeev and Garg, Rohini and Kothai, V and Agrawal, Anupriya and Senyshyn, Anatoliy and Boysen, Hans (2010) Phases in the (1-x)Na0.5Bi0.5TiO3-(x)CaTiO3 system. In: Journal of Physics: Condensed Matter, 22 (7).

Ranjan, Rajeev and Kalyani, Ajay Kumar and Garg, Rohini and Krishna, PSR (2009) Structure and phase transition of the (1-x)PbTiO3-(x)BiAlO3 system. In: Solid State Communications, 149 (45-46). pp. 2098-2101.

Ranjan, Rajeev and Kothai, V and Garg, Rohini and Agrawal, Anupriya and Senyshyn, Anatoliy and Boysen, Hans (2009) Degenerate rhombohedral and orthorhombic states in Ca-substituted Na0.5Bi0.5TiO3. In: Applied Physics Letters, 95 (4). 04290-1-04290-3.

Ranjan, Rajeev and Kothai, V and Senyshyn, Anatoliy and Boysen, Hans (2011) Neutron diffraction study of the coupling between spin, lattice, and structural degrees of freedom in 0.8BiFeO(3)-0.2PbTiO(3). In: Journal of Applied Physics, 109 (6).

Ranjan, Rajeev and Nabi, Hasan Sadat and Pentcheva, Rossitza (2009) First principles study of magnetism in divalent Eu perovskites. In: Journal Of Applied Physics, 105 (5). 053905-1-053905-4.

Ranjan, Rajeev and Raju, Appala K (2010) Unconventional mechanism of stabilization of a tetragonal phase in the perovskite ferroelectric (PbTiO3)(1-x)(BiFeO3)(x). In: Physical Review B: Condensed Matter and Materials Physics, 82 (5).

Ranjan, Rajeev and Singh, Sanjay and Boysen, Hans and Trots, Dmytro and Banik, S and Awasthi, AM and Mukhopadhyay, PK and Barman, SR (2009) Competing tetragonal and monoclinic phases in Ni2.2Mn0.80Ga. In: Journal Of Applied Physics, 106 (3). 033510-1-033510-8.

Ranjan, Shivendu and Dasgupta, Nandita and Rajendran, Bhavapriya and Avadhani, GS and Ramalingam, Chidambaram and Kumar, Ashutosh (2016) Microwave-irradiation-assisted hybrid chemical approach for titanium dioxide nanoparticle synthesis: microbial and cytotoxicological evaluation. In: ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 23 (12). pp. 12287-12302.

Ranjith, K and Swathi, SK and Kumar, Prajwal and Ramamurthy, Praveen C (2012) Dithienylcyclopentadienone derivative-co-benzothiadiazole: An alternating copolymer for organic photovoltaics. In: Solar Energy Materials and Solar Cells, 98 . pp. 448-454.

Ranjith, K and Swathi, SK and Kumar, Prajwal and Ramamurthy, Praveen C (2011) Pulsed laser deposition film of a donor-acceptor-donor polymer as possible active layer in devices. In: Journal of Materials Science (full set), 46 (7). pp. 2259-2266.

Ranjith, K and Swathi, SK and Malavika, A and Ramamurthy, Praveen C (2012) Random copolymers consisting of dithienylcyclopentadienone, thiophene and benzothiadiazole for bulk heterojunction solar cells. In: SOLAR ENERGY MATERIALS AND SOLAR CELLS, 105 . pp. 263-271.

Ranjith, R and Nikhil, R and Krupanidhi, SB (2006) Interfacial coupling and its size dependence in PbTiO3 and PbMg1/3Nb2/3O3 multilayers. In: Physical Review B, 74 (18).

Rao, CNR and Parkash, Om (1977) Anderson transitions in Ln1-xSrxCoO3 (Ln=Pr or Nd). In: Philosophical Magazine, 35 (4). pp. 1111-1117.

Rao, K Narasimha and Kashyap, Sanjay (2006) Preparation and Characterization of Indium Oxide and Indium Tin Oxide Films by Activated Reactive Evaporation. In: Surface Review and Letters, 13 (2-3). pp. 221-225.

Rao, KP and Doraivelu, SM and Roshan, HM and Prasad, YVRK (1983) Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1671-1679.

Rao, M and Yelloji, K and Natarajan, KA (1986) Electrochemical behavior of sulfide minerals under open-circuit conditions. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 582-591.

Rao, Sambasiva G and Prasad, YVRK (1983) Changes in texture and grain size in hot rolled magnesium and effect on yield strength. In: Bulletin of Materials Science, 5 (5). pp. 459-464.

Rao, TVLN and Bhat, MV and Sastry, DH (1996) Corrosion and stress corrosion behaviour of an Mg-Li-Al alloy in presence of inhibitors in aqueous environment. In: British Corrosion Journal, 31 (1). pp. 44-48.

Rao, Yelloji MK and Natarajan, KA (1988) Electrochemical aspects of grinding media-mineral interaction on sulphide flotation. In: Bulletin of Materials Science, 10 (5). pp. 411-422.

Rao, AD and Sandeep, SB and Adiga, V and Garner, SM and Pandey, UK and Sengupta, S and Ramamurthy, PC (2018) Flexural and bending fatigue studies of perovskite solar cells on Willow Glass substrates. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Rao, Arun D and Karalatti, Suresh and Thomas, Tiju and Ramamurthy, Praveen C (2013) Organic solar cell by using vertically aligned nanostructured ZnO nanorods. In: 39th IEEE Photovoltaic Specialists Conference (PVSC), UN 16-21, 2013, Tampa, FL, pp. 2752-2756.

Rao, Arun D and Karalatti, Suresh and Thomas, Tiju and Ramamurthy, Praveen C (2014) Self-Assembled, Aligned ZnO Nanorod Buffer Layers for High-Current-Density, Inverted Organic Photovoltaics. In: ACS APPLIED MATERIALS & INTERFACES, 6 (19). pp. 16792-16799.

Rao, Arun D and Murali, MG and Kesavan, Arul Varman and Ramamurthy, Praveen C (2018) Experimental investigation of charge transfer, charge extraction, and charge carrier concentration in P3HT:PBD-DT-DPP:PC70BM ternary blend photovoltaics. In: SOLAR ENERGY, 174 . pp. 1078-1084.

Rao, BS and Hemambar, C and Pathak, AV and Patel, KJ and Rodel, J and Jayaram, V (2006) Al/SiC carriers for microwave integrated circuits by a new technique of pressureless infiltration. In: IEEE Transactions on Electronics Packaging Manufacturing, 29 (1). pp. 58-63.

Rao, Badari Narayana and Avdeev, Maxim and Kennedy, Brendan and Ranjan, Rajeev (2015) Phase boundary at x=0.03 and its anomalous influence on the structure and properties in the lead-free piezoelectric (1-x)Na1/2Bi1/2TiO3-(x)BaTiO3. In: PHYSICAL REVIEW B, 92 (21).

Rao, Badari Narayana and Datta, Ranjan and Chandrashekaran, Selva S and Mishra, Dileep K and Sathe, Vasant and Senyshyn, Anatoliy and Ranjan, Rajeev (2013) Local structural disorder and its influence on the average global structure and polar properties in Na0.5Bi0.5TiO3. In: PHYSICAL REVIEW B, 88 (22).

Rao, Badari Narayana and Fitch, Andy N and Ranjan, Rajeev (2013) Ferroelectric-ferroelectric phase coexistence in Na1/2Bi1/2TiO3. In: PHYSICAL REVIEW B, 87 (6).

Rao, Badari Narayana and Kaviraj, P and Vaibavi, S R and Kumar, Amit and Bajpai, Saumendra Kumar and Arockiarajan, A (2017) Investigation of magnetoelectric properties and biocompatibility of CoFe2O4-BaTiO3 core-shell nanoparticles for biomedical applications. In: JOURNAL OF APPLIED PHYSICS, 122 (16).

Rao, Badari Narayana and Kaviraj, P and Vaibavi, SR and Kumar, Amit and Bajpai, Saumendra Kumar and Arockiarajan, A (2017) Investigation of magnetoelectric properties and biocompatibility of CoFe2O4-BaTiO3 core-shell nanoparticles for biomedical applications. In: JOURNAL OF APPLIED PHYSICS, 122 (16).

Rao, Badari Narayana and Khatua, Dipak Kumar and Garg, Rohini and Senyshyn, Anatoliy and Ranjan, Rajeev (2015) Structural crossover from nonmodulated to long-period modulated tetragonal phase and anomalous change in ferroelectric properties in the lead-free piezoelectric Na1/2Bi1/2TiO3-BaTiO3. In: PHYSICAL REVIEW B, 91 (21).

Rao, Badari Narayana and Olivi, Luca and Sathe, Vasant and Ranjan, Rajeev (2016) Electric field and temperature dependence of the local structural disorder in the lead-free ferroelectric Na0.5Bi0.5TiO3: An EXAFS study. In: PHYSICAL REVIEW B, 93 (2).

Rao, Badari Narayana and Ranjan, Rajeev (2012) Electric-field-driven monoclinic-to-rhombohedral transformation in Na1/2Bi1/2TiO3. In: PHYSICAL REVIEW B, 86 (13).

Rao, Badari Narayana and Senyshyn, Anatoliy and Olivi, Luca and Sathe, Vasant and Ranjan, Rajeev (2016) Maintaining local displacive disorders in Na0.5Bi0.5TiO3 piezoceramics by K0.5Bi0.5TiO3 substitution. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 36 (8). pp. 1961-1972.

Rao, Bhogeswara D and Jacob, KT (1982) SOS films and interfaces: chemical aspects. In: Journal of Crystal Growth, 58 (1). pp. 79-86.

Rao, Bhogeswara D and Nelson, Howard G and Jacob, KT (1983) Corrosion of 310 stainless steel in H2 H2O-H2S gas mixtures; studies at constant temperature and fixed oxygen potential. In: Metallurgical and Materials Transactions A, 14 (1). pp. 295-305.

Rao, Duggi Sridhara V and Sankarasubramanian, Ramachandran and Muraleedharan, Kuttanellore and Mehrtens, Thorsten and Rosenauer, Andreas and Banerjee, Dipankar (2014) Quantitative Strain and Compositional Studies of InxGa1-xAs Epilayer in a GaAs-based pHEMT Device Structure by TEM Techniques. In: MICROSCOPY AND MICROANALYSIS, 20 (4). pp. 1262-1270.

Rao, GS and Prasad, YVRK (1983) Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12.7 at % cadmium alloy. In: Journal of Materials Science, 18 (8). pp. 2385-2392.

Rao, GS and Prasad, YVRK (1983) Grain boundary strengthening in hot rolled magnesium-5 at.% thallium: Importance of texture. In: Scripta Metallurgica, 17 (1). pp. 147-151.

Rao, Hanumantha K and Natarajan, KA and Forssberg, KSE and Sharma, PK (2001) Surface chemical characterisation of Paenibacillus polymyxa before and after adaptation to sulfide minerals. In: International Journal of Mineral Processing, 62 (1-4). pp. 3-25.

Rao, KP and Prasad, YVRK and Sivaram, K (1990) Deformation processing map for control of microstructure in Al---4Mg alloy. In: Materials Letters, 10 (1-2). pp. 66-70.

Rao, MPLN and Gupta, GS and Manjunath, P and Kumar, S and Suri, AK and Krishnamurthy, N and Subramanian, C (2009) Temperature measurements in the boron carbide manufacturing process - A hot model study. In: International Journal of Refractory Metals and Hard Materials, 27 (3). pp. 621-628.

Rao, P and Singh, S and Kumar, K and Pandel, U and Srivastava, C (2024) Electrochemical Behavior and Surface Chemistry Studies of Electrodeposited MnMoCrCoFeNiCu High Entropy Alloy-Carbon Nanotube Composite Coatings. In: Journal of Materials Engineering and Performance .

Rao, P and Singh, S and Kumar, K and Pandel, U and Srivastava, C (2023) Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement of carbon nanotubes. In: Surface and Coatings Technology, 471 .

Rao, Prakash S and Tripathy, Sushree S and Raichur, Ashok M (2007) Dispersion studies of sub-micron zirconia using Dolapix CE 64. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 302 (1-3). pp. 553-558.

Rao, RR and Mani, M and Ramamurthy, PC (2018) An updated review on factors and their inter-linked influences on photovoltaic system performance. In: Heliyon, 4 (9).

Rao, Rama P and Anantharaman, TR (1962) Elastic anisotropy and lattice strain in deformed cobalt powder. In: Philosophical Magazine, 7 (76). pp. 705-707.

Rao, Rama P and Anantharaman, TR (1962) Incidence of heavy deformation faulting in f.c.c. alloys. In: Acta Metallurgica, 10 (12). p. 1192.

Rao, Rama P and Valiathan, MS (1989) Proceedings Of The Indo-Uk Symposium On Biomaterials Foreword. In: Bulletin Of Materials Science, 12 (1). p. 1.

Rao, S and Narayana, BV and Subramanian, S (1997) Optimization studies on limestone beneficiation. In: Indian Journal of Engineering and Materials Sciences, 4 (4). pp. 139-144.

Rao, Sambasiva G and Prasad, YVRK (1983) Strengthening mechanisms in hot-rolled magnesium and magnesium alloys. In: Materials Letters, 1 (5-6). pp. 171-174.

Rao, Sridhara DV and Sankarasubramanian, R and Kumar, Deepak and Singh, V and Bhat, Mahadeva K and Mishra, P and Vinayak, S and Srinivasan, T and Tyagi, R and Muraleedharan, K and Muralidharan, R and Banerjee, D (2016) Microstructural and Compositional Characterisation of Electronic Materials. In: DEFENCE SCIENCE JOURNAL, 66 (4, SI). pp. 341-352.

Rao, Srinivasa B and Jayaram, V (2001) New technique for pressureless infiltration of Al alloys into Al2O3 preforms. In: Journal of Materials Research, 16 (10). pp. 2906-2913.

Rao, Srinivasa B and Jayaram, V (2001) Pressureless Infiltration of Al–Mg Based Alloys into $Al_2O_3$ Preforms: Mechanisms and Phenomenology. In: Acta Materialia, 49 (13). pp. 2373-2385.

Rao, Vaman D and Narayanan, MK and Nayak, UB and Ananthapadmanabhan, K and Somasundaran, P (1985) Flotation of calcareous Mussorie phosphate ore. In: International Journal of Mineral Processing, 14 (1). pp. 57-66.

Rao, Yelloji MK and Natarajan, KA (1989) Effect of Galvanic Interaction between Grinding Media and Minerals on Sphalerite Fotation. In: International Journal of Mineral Processing, 27 (1-2). pp. 95-109.

Rao, Yelloji MK and Natarajan, KA (1990) Effect of electrochemical interactions among sulphide minerals and grinding medium on the flotation of sphalerite and galena. In: International Journal of Mineral Processing, 29 (3). pp. 175-194.

Rao, Yelloji MK and Natarajan, KA (1989) Electrochemical Effects of Mineral-Mineral Interactions on the Flotation of Chalcopyrite and Sphalerite. In: International Journal of Mineral Processing, 27 (3-4). pp. 279-293.

Rao, Yelloji MK and Natarajan, KA (1988) Influence of galvanic interaction between chalcopyrite and some metallic materials on flotation. In: Minerals Engineering, 1 (4). pp. 281-294.

Rapheal, G and Kumar, S and Blawert, C and Dahotre, Narendra B (2010) Laser Surface Alloying of a Creep Resistant Magnesium Alloy MRI 230D with Al and Al2O3. In: Magnesium Technology Symposium 2010, FEB 14-18, 2010, Seattle, WA, pp. 161-166.

Rapheal, G and Kumar, S and Blawert, C and Dahotre, Narendra B (2011) Wear behavior of plasma electrolytic oxidation (PEO) and hybrid coatings of PEO and laser on MRI 230D magnesium alloy. In: Wear, 271 (9-10, ). pp. 1987-1997.

Rapheal, G and Kumar, S and Scharnagl, N and Blawert, C (2016) Effect of current density on the microstructure and corrosion properties of plasma electrolytic oxidation (PEO) coatings on AM50 Mg alloy produced in an electrolyte containing clay additives. In: SURFACE & COATINGS TECHNOLOGY, 289 . pp. 150-164.

Rastogi, A and Kalyan, D and Makineni, SK and Neelakantan, S (2024) Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy. In: Materials Characterization, 207 .

Rath, RK and Subramanian, S (1999) Effect of guar gum on selective separation of sphalerite from galena by flotation. In: Transactions Of The Institution Of Mining And Metallurgy Section C-Mineral Processing And Extractive Metallurgy, 108 . C1-C7.

Rath, RK and Laskowski, JS and Subramanian, S (1999) Interaction of guar gum with hydrophobic solids. In: 3rd UBC-McGill Bi-Annual International Symposium on Fundamentals of Mineral Processing held at the 38th Annual Conference of Metallurgists of CIM, AUG 17-19, 1999, Quebec, Canada.

Rath, RK and Subramanian, S (1999) Adsorption, electrokinetic and differential flotation studies on sphalerite and galena using dextrin. In: International Journal of Mineral Processing, 57 (4). pp. 265-283.

Rath, RK and Subramanian, S (1997) Studies on adsorption of guar gum onto biotite mica. In: Minerals Engineering, 10 (12). pp. 1405-1420.

Rath, RK and Subramanian, S and Laskowski, JS (1997) Adsorption of dextrin and guar gum onto talc. A comparative study. In: Langmuir, 13 (23). pp. 6260-6266.

Rath, RK and Subramanian, S and Pradeep, T (2000) Surface chemical studies on pyrite in the presence of polysaccharide-based flotation depressants. In: Journal of Colloid and Interface Science, 229 (1). pp. 82-91.

Rath, Rajendra Kumar and Subramanian, S (1998) Surface chemical studies on mica and galena using dextrin. In: Langmuir, 14 (15). pp. 4005-4010.

Raut, Devaraj and Kiran, Mangalampalli SRN and Mishra, Manish Kumar and Asiri, Abdullah M and Ramamurty, Upadrasta (2016) On the loading rate sensitivity of plastic deformation in molecular crystals. In: CRYSTENGCOMM, 18 (20). pp. 3551-3555.

Raut, Devaraj and Narayan, R L and Tandaiya, Parag and Ramamurty, Upadrasta (2018) Temperature-dependence of mode I fracture toughness of a bulk metallic glass. In: ACTA MATERIALIA, 144 . pp. 325-336.

Ravi, R and Kumar, AK and Paul, A (2010) Diffusion Studies in A(3)B Compounds with A15 Structure. In: 5th International Conference on Diffusion in Solids and Liquids, JUN 24-26, 2009, Rome.

Ravi, R and Prasad, YVRK and Sarma, VVS and Raidu, RS (2006) Artificial neural network model for predicting stable and unstable regions in Cu-Zn alloys. In: Materials and Manufacturing Processes, 21 (8). pp. 756-760.

Ravi, A and Punith Kumar, MK and Rekha, MY and Santosh, MS and Srivastava, C (2020) Graphene based nanocomposites: Synthesis, properties and application as electrochemical sensors. [Book Chapter]

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (2002) The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct). In: Metallurgical and Materials Transactions A, 33 (2). pp. 391-400.

Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (1996) A study of the influence of mischmetal additions to Al-7Si-0.3Mg (LM 25/356) alloy. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1283-1292.

Ravi, R and Paul, A (2012) Diffusion mechanism in the gold-copper system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 23 (12). pp. 2152-2156.

Ravi, R and Paul, A (2011) Interdiffusion study on Co(W) solid solution and topological close-packed mu phase in Co-W system. In: Intermetallics, 19 (3). pp. 426-428.

Ravi, R and Prasad, YVRK and Sarma, VVS (2003) Development of Expert Systems for the Design of a Hot-Forging Process Based on Material Workability. In: Journal of Materials Engineering and Performance, 12 (6). pp. 646-652.

Ravi, Raju and Paul, Aloke (2012) Diffusion and growth mechanism of phases in the Pd-Sn system. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 23 (12). pp. 2306-2310.

Ravi, V and Jain, A and Taneja, A and Chatterjee, K and Sundaresan, NR (2021) Isolation and Culture of Neonatal Murine Primary Cardiomyocytes. In: Current Protocols, 1 (7).

Ravichandran, KS and Rao, Venkata HC and Dwarakadasa, ES and Nair, Krishnadas CG (1987) Microstructural effects and crack closure during near-threshold fatigue crack propagation in a high-strength steel. In: Metallurgical and Materials Transactions A, 18 (6). pp. 865-876.

Ravichandran, N and Prasad, YVRK (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. In: Metallurgical and Materials Transactions A, 22 (10). pp. 2339-2348.

Ravichandran, KS (1991) A rationalisation of fatigue thresholds in pearlitic steels using a theoretical model. In: Acta Metallurgica et Materialia, 39 (6). 1331-1341 .

Ravichandran, KS (1990) A theoretical model for roughness induced crack closure. In: International Journal of Fracture, 44 (2). pp. 97-110.

Ravichandran, KS and Dwarakadasa, ES (1990) Effects of temper level on the dependence of fatigue crack growth threshold and crack closure on the prior austenitic grain size. In: Metallurgical Transactions. Physical Metallurgy and Material, 21 (12). pp. 3171-3186.

Ravichandran, KS and Dwarakadasa, ES (1987) Effects of tempered structure on the near threshold fatigue crack growth behavior of a coarse grained high strength steel. In: Engineering Fracture Mechanics, 28 (4). pp. 435-444.

Ravichandran, KS and Dwarakadasa, ES (1989) Fatigue crack growth transitions in Ti-6Al-4V alloy. In: Scripta Metallurgica, 23 (10). pp. 1685-1690.

Ravichandran, KS and Dwarakadasa, ES (1991) Micromechanics Of Fatigue Crack-Growth At Low Stress Intensities In A High-Strength Steel. In: Transactions of the Indian Institute of Metals, 44 (5). 375 -396.

Ravichandran, KS and Dwarakadasa, ES (1991) Theoretical Modelling of the Effects of Grain Size on the Threshold for Fatigue Crack Growth. In: Acta Metallurgica et Materialia, 39 (6). pp. 1343-1357.

Ravichandran, KS and Dwarakadasa, ES and Banerjee, D (1991) Mechanisms of cleavage during fatigue crack growth in $Ti-6Al-4V$ alloy. In: Scripta Metallurgica et Materialia, 25 (9). pp. 2115-2120.

Ravichandran, KS and Panchapagesan, TS and Kishore, * and Dwarakadasa, ES (1987) The effect of crack closure on the grain size dependence of fatigue crack growth threshold. In: Scripta Metallurgica, 21 (7). pp. 919-924.

Ravichandran, MV and Prasad, Krishna R and Dwarakadasa, ES (1992) Fracture toughness evaluation of aluminium 4% $M_g-AI_20_3$ liquid-metallurgy particle composite. In: Journal of Materials Science Letters, 11 (8). 452 -456.

Ravichandran, N and Prasad, YVRK (1993) Characteristics of Dynamic Recrystalization Domain in the Processing Map for Hot-Working of OFHC Coper. In: Zeitschrift für Metallkunde, 84 (2). pp. 132-139.

Ravichandran, N and Prasad, YVRK (1992) Influence of oxygen on dynamic recrystallization during hot working of polycrystalline copper. In: Materials Science and Engineering A, 156 (2). pp. 195-204.

Ravichandrana, KS and Dwarakadasaa, ES (1986) Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels. In: Materials Science and Engineering A, 83 (1). L11 -L16.

Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.

Ravikiran, A and Natarajan, KN and Biswas, SK and Bai, Pramila BN (1990) Erosion studies on hyper steel and high chrome cast iron. In: Wear, 141 (1). pp. 85-94.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.% $SiC_p MMC$. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Effect of sliding speed on wear behaviour of A356 Al-30 wt.%SiCp MMC. In: Wear, 206 (1-2). pp. 33-38.

Ravikiran, A and Surappa, MK (1997) Oscillations in coefficient of friction during dry sliding of A356 Al-30% wt SiCp MMC against steel. In: Scripta Materialia, 36 (1). pp. 95-98.

Ravikumar, K and Kalsar, Rajib and Pramanik, Sudipta and Suwas, Satyam and Basu, Bikramjit (2017) Probing lamellar twins in spark plasma sintered CaTiO3 using Electron Backscattered Diffraction. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 37 (13). pp. 4235-4240.

Ravikumar, R and Jagadeshvaran, PL and Biju, R and Binoy, L and Raghavan, JRV and Krishnakumar, TS and Indulal, CR (2023) Role of polypyrrole-based SrO–CuO nanocomposite on flame retardancy and heat dissipation applications. In: Chemical Papers .

Ravindra, A and Bandyopadhyay, Amit and Dwarakadasa, ES and Srivatsan, TS (1994) Influence of hydrogen charging on mechanical properties of gas tungsten arc weldments of aluminium-lithium alloy 8090. In: Journal of Materials Science, 29 (5). pp. 1203-1212.

Ravindra, A and Dwarakadasa, ES (1992) Effect of post-weld heat treatment on mechanical properties of gas-tungsten arc welds of Al-Li alloy 8090. In: Journal of Materials Science Letters, 11 (22). pp. 1543-1546.

Ravindra, A and Dwarakadasa, ES and Srivatsan, TS and Ramanath, C and Iyengar, KVV (1993) Electron-beam weld microstructures and properties of aluminium-lithium alloy 8090. In: Journal of Materials Science (full set), 28 (12). pp. 3173-3182.

Ravindra, P and Athresh, E and Sandilya, RS and Ranjan, R and Avasthi, S (2019) Modulation of Conductivity in Manganese Vanadium Oxide. In: 46th IEEE Photovoltaic Specialists Conference, PVSC 2019, 16-21, June 2019, United States, pp. 1771-1773.

Ravindra, P and Chaudhary, R and Athresh, E and Vura, S and Raghavan, S and Ranjan, R and Majumdar, K and Avasthi, S (2021) Effect of nitrogen annealing on the optoelectronic properties of manganese vanadate. In: Semiconductor Science and Technology, 36 (5).

Ravindra, P and Kumar, S and Atresh, E and Jash, A and Ranjan, R and Avasthi, S (2018) Ag 2 CrO 4 Schottky Junction for All-Oxide Solar Cells. In: 7th IEEE World Conference on Photovoltaic Energy Conversion, WCPEC 2018, 10 - 15 June 2018, Waikoloa Village, pp. 1845-1848.

Ravindra, Pramod and Baral, Madhusmita and Biswas, Tathagata and Nand, Mangla and Jha, S. N. and Athresh, Eashwer and Ranjan, Rajeev and Jain, Manish and Ganguli, Tapas and Avasthi, Sushobhan (2019) Electrical and optical properties of low-bandgap oxide Zn2Mo3O8 for optoelectronic applications. In: THIN SOLID FILMS, 677 . pp. 95-102.

Ravindran, A and Singh, A and Raichur, AM and Chandrasekaran, N and Mukherjee, A (2010) Studies on interaction of colloidal Ag nanoparticles with Bovine Serum Albumin (BSA). In: Colloids and Surfaces B: Biointerfaces, 76 (1). pp. 32-37.

Ravindran, Aswathy and Elavarasi, M and Prathna, TC and Raichur, AshokM and Chandrasekaran, N and Mukherjee, Amitava (2012) Selective colorimetric detection of nanomolar Cr (VI) in aqueous solutions using unmodified silver nanoparticles. In: SENSORS AND ACTUATORS B-CHEMICAL, 166 . pp. 365-371.

Raviprasad, K and Aoki, K and Chattopadhyay, K (1993) The nature of dislocations and effect of order in rapidly solidified Fe-(5.5-7.5)wt.%Si alloys. In: Materials Science and Engineering A, 172 (1-2). pp. 125-135.

Raviprasad, K and Chattopadhyay, K (1992) Continuous ordering below the tricritical point: A critical test for the kinetic pathway in Fe-12at.% Si alloy. In: Philosophical Magazine Letters, 65 (5). pp. 255-259.

Raviprasad, K and Chattopadhyay, K (1993) The Influence of Critical Points and Structure and Microstructural Evolution in Iron Rich Fe-Si Alloys. In: Acta Metallurgica et Materialia, 41 (2). pp. 609-624.

Raviprasad, K and Chattopadhyay, K (1988) The effect of rapid solidification on the order-disorder transformation in iron-based alloys. In: Materials Science and Engineering, 98 . pp. 281-284.

Raviprasad, K and Chattopadhyay, K (1995) The nature of the fringe contrast from the shear APBs in ordered Fe-12.2 at.%Si alloy. In: Scripta Metallurgica et Materialia, 32 (7). pp. 1049-1054.

Raviprasad, K and Ranganathan, S and Chattopadhyay, K (1992) On the Influence of Tricritical Point on the Microstructural Evolution in Fe-Ge System. In: Scripta Metallurgica et Materialia, 26 (3). pp. 467-472.

Raviprasad, K and Ravishankar, N and Chattopadhyay, K and Umemoto, M (1998) Magnetic hardening mechanism in nanocrystalline $Nd_2Fe_{14}B$ with 0.1 at. % addition of Cr, Cu, or Zr. In: Journal of Applied Physics, 83 (02). pp. 916-920.

Raviprasad, K and Tenwick, M and Davies, HA and Chattopadhyay, K (1986) The Nature of Ordered Structures in Melt Spun Iron-Silicon Alloys. In: Scripta Metallurgica, 20 (9). pp. 1265-1270.

Ravishankar, N and Abinandanan, TA and Chattopadhyay, K (2001) Application of effective potential formalism to mechanical alloying in Ag–Cu and Cu–Fe systems. In: Materials Science and Engineering A, 304-30 . pp. 413-417.

Ravishankar, N and Park, J and Aoki, K and Masumoto, T and Chattopadhyay, K (1999) Microstructural evolution and giant magnetoresistance in melt spun and annealed Cu-85(FeCo)(15) alloy. In: Journal of Applied Physics, 86 (5). pp. 2733-2738.

Rawat, NK and Ghosh, R (2020) High-performance microwave reactors for small-scale microwave synthesis. [Book Chapter]

Ray, A and Bhattacharya, V and Chattopadhyay, K (2005) Evolution of morphology of undercooled droplets in Cu-Cu3p near euteictic alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 761-767.

Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR and Goswami, B and Singh, MP and Tiwari, YN and Roy, PK and Das, HK and Sanyal, D and Dwarakadasa, ES (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. In: High temperature materials and processes, 25 (3). pp. 109-119.

Ray, AK and Das, G and Mukhopadhyay, NK and Bhattacharya, DK and Dwarakadasa, ES and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. In: Bulletin of Materials Science, 22 (1). pp. 25-32.

Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR and Goswam, B and Sahu, JK and Whittenberger, JD (2007) Fatigue behavior of a thermal barrier coated superalloy at $800 ^0 C$. In: Materials Science and Engineering: A, 448 (1-2). pp. 294-298.

Ray, AK and Dwarakadasa, ES and Raman, KS (1986) Effect of porosity and slag inclusions on the fatigue fracture behaviour of 15CDV6 butt welds. In: Journal of Materials Science Letters, 5 (8). pp. 765-768.

Ray, Ashok Kumar and Goswami, Bangsidhar and Singh, Mahendra Prasad and Das, Deepak Kumar and Roy, Nilima and Dash, Byomkesh and Kumar, Ravi B and Ray, Ajoy Kumar and Das, Gautam and Rupa, Karuna Purnapu P and Parida, Narayan and Das, Arpan and Swaminathan, Jagannathan and Dwarakadasa, Eshwarahalli (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. In: Materials Characterization, 57 (3). pp. 137-210.

Ray, Nachiketa and Jagadeesh, Gopalan and Suwas, Satyam (2015) Response of shock wave deformation in AA5086 aluminum alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 622 . pp. 219-227.

Ray, PK and Chattopadhyay, K and Murty, BS (2008) Influence of thermodynamics and local geometry on glass formation in Zr based alloys. In: Applied Physics Letters, 93 (6). 061903-1-061903-3.

Ray, S and Barman, B and Darshan, C and Tarafder, K and Bangera, KV (2022) ZnSxSe1−x thin films: A study into its tunable energy band gap property using an experimental and theoretical approach. In: Solar Energy, 240 . pp. 140-146.

Ray, SK and Rodriguez, P and Sastry, DH (1993) Deformation dynamics of SS-316 Between 1023-K TO 1223-K In The Framework of Cottrell-Stokes Law. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 31-39.

Ray, SK and Rodriguez, P and Sastry, DH (1993) Method of Analysis if Uniaxial Deformation Data. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 7-19.

Ray, SK and Sasikala, G and Rodriguez, P and Sastry, DH (1993) Continuity of plastic strain rate in stress relaxation tests. In: Materials Science and Technology, 9 (12). pp. 1079-1085.

Raza, A and Das, S and Roy, D (2024) Geometric thermodynamics of collapse of gels. In: Physical Review E, 110 (4).

Raza, W and Ahmad, K (2018) A highly selective Fe@ZnO modified disposable screen printed electrode based non-enzymatic glucose sensor (SPE/Fe@ZnO). In: MATERIALS LETTERS, 212 . pp. 231-234.

Reddy, G Srinivas and Jagannatham, M and Kumar, Lailesh and Paramesh, Gadige and Mallikarjunaiah, K J (2019) Low-cost novel synthesis route to prepare cobalt ferrite based nanocrystals. In: MATERIALS RESEARCH EXPRESS, 6 (10).

Reddy, Ravindra S and Hajra, JP (1994) Thermodynamics and Phase Equilibria in the In-Sb System. In: Calphad, 18 (1). pp. 39-45.

Reddy, Ravindra S and Hajra, JP (1993) Thermodynamics and phase equilibria in the Ga---Sb system. In: Materials Science and Engineering B, 20 (3). pp. 308-311.

Reddy, Ravindra S and Hajra, Jnan P (1993) Thermodynamics and phase equilibria in the system Ga---In using multi-parameter functions. In: Calphad, 17 (2). pp. 151-156.

Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part I. Line Compounds with Narrow Homogeneity Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.

Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part II. Oxide Solid Solutions of Wide Composition Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.

Reddy, SNS and Sundlof, Brian R and Jacob, KT (2011) Diffusion path during internal displacement reactions in multi-component oxides: Reaction between Fe and (Co,Mg)TiO3 solid solution at 1273 K. In: Solid State Ionics, 182 (1). pp. 1-7.

Reddy, SNS. and Jacob, KT and Rajitha, G (2012) Reactive Interdiffusion: A Method for Making Composition Graded Metal-ceramic Composites. In: HIGH TEMPERATURE MATERIALS AND PROCESSES, 31 (2). pp. 97-103.

Reddy, Siva Kumar and Lal, Devi and Misra, Abha and Kumar, Praveen (2015) Novel architecture for anomalous strengthening of a particulate filled polymer matrix composite. In: RSC ADVANCES, 5 (77). pp. 62477-62485.

Reddy, Srinivas G and Sahu, Sumit Ranjan and Prakash, R and Jagannatham, M (2019) Synthesis of cobalt-rich alloys with high saturation magnetization: A novel synthetic approach by hydrazine reduction method. In: Results in Physics, 12 . pp. 652-661.

Reddy Padidam, S and Balasaheb Kadam, D and Thakkellapati, S and Verma, M and Raichur, AM and Narashimhan Ramana, L (2024) Single-step synthesis of self-assembled carbon dots for enhanced cancer cell retention and theranostics applications. In: Microchemical Journal, 198 .

Regasa, MB and Refera Soreta, T and Femi, OE and C. Ramamurthy, P (2020) Development of Molecularly Imprinted Conducting Polymer Composite Film-Based Electrochemical Sensor for Melamine Detection in Infant Formula. In: ACS Omega, 5 (8). pp. 4090-4099.

Regasa, MB and Soreta, TR and Femi, OE and Ramamurthy, PC and Kumar, S (2020) Molecularly imprinted polyaniline molecular receptor�based chemical sensor for the electrochemical determination of melamine. In: Journal of Molecular Recognition .

Regasa, MB and Soreta, TR and Femi, OE and Ramamurthy, PC and Subbiahraj, S (2020) Novel multifunctional molecular recognition elements based on molecularly imprinted poly (aniline-co-itaconic acid) composite thin film for melamine electrochemical detection. In: Sensing and Bio-Sensing Research, 27 .

Rejil, C Maxwell and Muthukumaran, S and Sharan, C and Gill, S P and Dong, H B (2017) Interlayer Engineering on Friction Welded Titanium Tube to Stainless Steel Tube Plate by External Tool Process. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 70 (3, SI). pp. 691-701.

Rekha, M Y and Akash, R and Srivastava, Chandan (2018) Effect of Solvent on Average Size and Size Distribution of Platinum Nanoparticles. In: NATIONAL ACADEMY SCIENCE LETTERS-INDIA, 41 (3). pp. 169-172.

Rekha, M Y and Kamboj, Anshul and Srivastava, Chandan (2017) Electrochemical behaviour of SnZn-graphene oxide composite coatings. In: THIN SOLID FILMS, 636 . pp. 593-601.

Rekha, M Y and Mallik, Nitin and Srivastava, Chandan (2018) First Report on High Entropy Alloy Nanoparticle Decorated Graphene. In: SCIENTIFIC REPORTS, 8 .

Rekha, M Y and Srivastava, Chandan (2019) Microstructural Evolution and Corrosion Behavior of ZnNi-Graphene Oxide Composite Coatings. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50 (12). pp. 5896-5913.

Rekha, M Y and Kamboj, Anshul and Srivastava, Chandan (2018) Electrochemical behavior of SnNi-graphene oxide composite coatings. In: THIN SOLID FILMS, 653 . pp. 82-92.

Rekha, MY and Kumar, Punith MK and Srivastava, Chandan (2016) Electrochemical behaviour of chromium-graphene composite coating. In: RSC ADVANCES, 6 (67). pp. 62083-62090.

Rekha, MY and Nousheen, N and Samad, R and Srivastava, C (2020) Microstructural engineering of ZnCr coating by incorporation of graphene oxide and its effect on the corrosion behaviour of the coating. In: Surface and Coatings Technology, 403 .

Rekha, MY and Srivastava, C (2021) Electrogalvanization using Zn-graphene oxide composite coatings with enhanced corrosion resistance performance. In: Journal of Coatings Technology and Research .

Rekha, MY and Srivastava, C (2020) High corrosion resistance of metal-graphene oxide-metal multilayer coatings. In: Philosophical Magazine, 100 (1). pp. 18-31.

Rekha, MY and Srivastava, Chandan (2019) Microstructure and corrosion properties of zinc-graphene oxide composite coatings. In: CORROSION SCIENCE, 152 . pp. 234-248.

Remanan, S and Padmavathy, N and Ghosh, S and Mondal, S and Bose, S and Das, NC (2021) Porous Graphene-based Membranes: Preparation and Properties of a Unique Two-dimensional Nanomaterial Membrane for Water Purification. In: Separation and Purification Reviews, 50 (3). pp. 262-282.

Remanan, S and Padmavathy, N and Rabiya, R and Ghosh, S and Das, TK and Bose, S and Sen, R and Das, NC (2020) Converting Polymer Trash into Treasure: An Approach to Prepare MoS2Nanosheets Decorated PVDF Sponge for Oil/Water Separation and Antibacterial Applications. In: Industrial and Engineering Chemistry Research, 59 (45). pp. 20141-20154.

Remanan, S and Samantaray, PK and Bose, S and Das, NC (2021) Phase transited lysozyme particles and MoS2 nanosheets modified elastomer-like antibacterial and antifouling microfiltration membrane derived from poly(ethylene-co-methyl acrylate)/poly(vinylidene fluoride) (EMA/PVDF) blend for water purification application. In: Microporous and Mesoporous Materials, 316 .

Remanan, Sanjay and Ghosh, Sabyasachi and Das, Tushar Kanti and Sharma, Maya and Bose, Madhuparna and Bose, Suryasarathi and Das, Amit Kumar and Das, Narayan Chandra (2019) Gradient crystallinity and its influence on the poly(vinylidene fluoride)/poly(methyl methacrylate) membrane-derived by immersion precipitation method. In: JOURNAL OF APPLIED POLYMER SCIENCE .

Remanan, Sanjay and Sharma, Maya and Bose, Suryasarathi and Das, Narayan Ch (2018) Recent Advances in Preparation of Porous Polymeric Membranes by Unique Techniques and Mitigation of Fouling through Surface Modification. In: CHEMISTRYSELECT, 3 (2). pp. 609-633.

Ren, Pengrong and Hoefling, Marion and Koruza, Jurij and Lauterbach, Stefan and Jiang, Xijie and Froemling, Till and Khatua, Dipak Kumar and Dietz, Christian and Porz, Lukas and Ranjan, Rajeev and Kleebe, Hans-Joachim and Roedel, Juergen (2019) High temperature creep-mediated functionality in polycrystalline barium titanate. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY .

Rigney, David A and Karthikeyan, S (2010) The Evolution of Tribomaterial During Sliding: A Brief Introduction. In: 428th Wilhelm and Else Heraeus Seminar on Physics of Tribology - Understanding Friction and Wear in Technical Systems, MAR 23-25, 2009, Bad Honnef, pp. 3-7.

Rijal, A and Singh, SP and Han, J-K and Kawasaki, M and Kumar, P (2020) Effect of High-Pressure Torsion on Hardness and Electrical Resistivity of Commercially Pure Cu. In: Advanced Engineering Materials, 22 (1).

Rijal, A and Singh, SP and Han, JK and Kawasaki, M and Kumar, P (2019) Effect of HPT processing followed by long term natural ageing on mechanical and electrical properties of commercially pure cu. In: Letters on Materials, 9 (4 Spec). pp. 561-565.

Riyahi khorasgani, A and Kundin, J and Lukianova, O and Esakkiraja, N and Paul, A and Divinski, S and Steinbach, I (2023) Carbon effect on thermo-kinetics of Co-Cr-Fe-Mn-Ni high entropy alloys: A computational study validated by interdiffusion experiments. In: Acta Materialia, 261 .

Riyazulla, MS and Gundewar, CS and Haran, NP and Subramanian, S and Thomas, J (2006) Mineralogical and electron microprobe studies on the cobalt sample from Kalyadi copper deposit, Hassan district, Karnataka. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Rizwana, N and Maslekar, N and Chatterjee, K and Yao, Y and Agarwal, V and Nune, M (2023) Dual Crosslinked Antioxidant Mixture of Poly(vinyl alcohol) and Cerium Oxide Nanoparticles as a Bioink for 3D Bioprinting. In: ACS Applied Nano Materials .

Rohatgi, K and Rohatgi, PK (1980) A delphi study on health in future India. In: Journal fo Scientific and Industrial Research, 39 (7). pp. 359-363.

Rohatgi, PK and Bhutani, AK and Abraham, KP (1979) Directional solidification of aluminum-nickel eutectic alloys using electroslag remelting. In: Metallurgical Transactions. Physical Metallurgy and Material, 10 (3). pp. 333-342.

Rohatgi, PK and Murali, N and Shetty, HR and Chandrashekhar, R (1976) Improved damping capacity and machinability of graphite particle-aluminum alloy composites. In: Materials Science and Engineering, 26 (1). pp. 115-122.

Rohatgi, PK and Pai, BC (1980) Seizure resistance of cast aluminium alleys containing dispersed graphite particles of differing sizes. In: Wear, 59 (2). pp. 323-332.

Rohini, Rani and Bose, Suryasarathi (2019) Electrodeposited carbon fiber and epoxy based sandwich architectures suppress electromagnetic radiation by absorption. In: COMPOSITES PART B-ENGINEERING, 161 . pp. 578-585.

Rohini, Rani and Bose, Suryasarathi (2014) Electromagnetic Interference Shielding Materials Derived from Gelation of Multiwall Carbon Nanotubes in Polystyrene/Poly(methyl methacrylate) Blends. In: ACS APPLIED MATERIALS & INTERFACES, 6 (14). pp. 11302-11310.

Rohini, Rani and Bose, Suryasarathi (2017) Electromagnetic wave suppressors derived from crosslinked polymer composites containing functional particles: Potential and key challenges. In: Nano-Structures & Nano-Objects, 12 . pp. 130-146. ISSN 2352507X

Rohini, Rani and Bose, Suryasarathi (2015) Tailored interface and enhanced elastic modulus in epoxy-based composites in presence of branched poly(ethyleneimine) grafted multiwall carbon nanotubes. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (12). pp. 7907-7913.

Rohini, Rani and Katti, Prajakta and Bose, Suryasarathi (2015) Tailoring the interface in graphene/thermoset polymer composites: A critical review. In: POLYMER, 70 . A17-A34.

Rohini, Rani and Lasitha, K and Bose, Suryasarathi (2016) Epoxy composites containing cobalt(II)-porphine anchored multiwalled carbon nanotubes as thin electromagnetic interference shields, adhesives and coatings. In: JOURNAL OF MATERIALS CHEMISTRY C, 4 (2). pp. 352-361.

Rondiya, SR and Mali, SS and Roy, A and Inwati, GK and Rahane, GK and Jadhav, YA and Suresh, S and Debnath, T and Hong, CK and Dzade, NY (2023) Interfacial band offset engineering with barium-doping towards enhanced performance of all inorganic CsPbI2Br perovskite solar cells. In: Physical Chemistry Chemical Physics .

Rout, A and Gumaste, A and Pandey, P and Oliveira, EF and Demiss, S and Mahesh, VP and Bhatt, C and Raphael, K and Ayyagari, RS and Autreto, PAS and Palit, M and Olu, F and Galvao, DS and Arora, A and Tiwary, CS (2020) Bioinspired Aluminum Composite Reinforced with Soft Polymers with Enhanced Strength and Plasticity. In: Advanced Engineering Materials .

Rout, A and Pandey, P and Oliveira, EF and da Silva Autreto, PA and Gumaste, A and Singh, A and Galvão, DS and Arora, A and Tiwary, CS (2019) Atomically locked interfaces of metal (Aluminum) and polymer (Polypropylene) using mechanical friction. In: Polymer, 169 . pp. 148-153.

Rout, U and Tippireddy, S and Werbach, K and Pambannan, P and Rogl, G and Rogl, P and Mallik, RC (2020) Simultaneous optimization of power factor and thermal conductivity via Te and Se double substitution in Cu12Sb4S13 tetrahedrite. In: Scripta Materialia, 188 . pp. 151-156.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Processing Response of Boron Modified Ti-6Al-4V Alloy In (alpha plus beta) Working Regime. In: 138th TMS Annual Meeting and Exhibition, FEB 15-19, 2009, San Francisco.

Roy, A and Chatterjee, K (2022) Bactericidal Anisotropic Nanostructures on Titanium Fabricated by Maskless Dry Etching. In: ACS Applied Nano Materials, 5 (3). pp. 4447-4461.

Roy, A and Chatterjee, K (2021) Theoretical and computational investigations into mechanobactericidal activity of nanostructures at the bacteria-biomaterial interface: A critical review. In: Nanoscale, 13 (2). pp. 647-658.

Roy, A and Gupta, SK and Suwas, S and Chatterjee, K (2022) The Significance of Crystallographic Texture in Dry Etching of Titanium to Engineer Bioinspired Nanostructured Bactericidal Surfaces. In: JOM .

Roy, A and Patil, D and Yarlagadda, PKDV and Chatterjee, K (2023) Cooperative stiffening of flexible high aspect ratio nanostructures impart mechanobactericidal activity to soft substrates. In: Journal of Colloid and Interface Science, 652 . pp. 2127-2138.

Roy, Aashis S and Gupta, Satyajit and Seethamraju, Sindhu and Madras, Giridhar and Ramamurthy, Praveen C (2014) Impedance spectroscopy of novel hybrid composite films of polyvinylbutyral (PVB)/functionalized mesoporous silica. In: COMPOSITES PART B-ENGINEERING, 58 . pp. 134-139.

Roy, Aashis S and Gupta, Satyajit and Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2014) Fabrication of Poly(Vinylidene Chloride-Co-Vinyl Chloride)/TiO2 Nanocomposite Films and Their Dielectric Properties. In: SCIENCE OF ADVANCED MATERIALS, 6 (5). pp. 946-953.

Roy, Aashis S and Gupta, Satyajit and Sindhu, S and Parveen, Ameena and Ramamurthy, Praveen C (2013) Dielectric properties of novel PVA/ZnO hybrid nanocomposite films. In: COMPOSITES PART B-ENGINEERING, 47 . pp. 314-319.

Roy, Aashis S and Saravanan, S and Kishore, K and Ramamurthy, Praveen C and Madras, Giridhar (2014) Dielectric Impedance Studies of Poly(vinyl butyral)-Cenosphere Composite Films. In: POLYMER COMPOSITES, 35 (8). pp. 1636-1643.

Roy, Aashish and Parveen, Ameena and Deshpande, Raghunandan and Bhat, Ravishankar and Koppalkar, Anilkumar (2013) Microscopic and dielectric studies of ZnO nanoparticles loaded in ortho-chloropolyaniline nanocomposites. In: Journal of Nanoparticle Research, 15 (1). 1337_1-1337_11.

Roy, Apurba and Kumar, Punith MK and Srivastava, Chandan (2016) Graphene as a diffusion barrier for isomorphous systems: Cu-Ni system. In: CHEMICAL PHYSICS LETTERS, 646 . pp. 158-161.

Roy, Apurba and Kumar, Punith MK and Srivastava, Chandan (2016) Graphene as a diffusion barrier for isomorphous systems: Cu-Ni system. In: CHEMICAL PHYSICS LETTERS, 646 . pp. 158-161.

Roy, Arijit and Nani, E S and Lahiri, Arka and Gururajan, M P (2017) Interfacial free energy anisotropy driven faceting of precipitates. In: PHILOSOPHICAL MAGAZINE, 97 (30, A). pp. 2705-2735.

Roy, Debdutta and Buravalla, V and Mangalgiri, PD and Allegavi, S and Ramamurty, U (2008) Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer. In: Materials Science and Engineering A, 494 (1-2). pp. 429-435.

Roy, Nilima and Godiwalla, Kersi M and Dwarakadasa, Eswarahalli S and Ray, Ashok Kumar (2004) Elasto-plastic deformation in thermal barrier coated superalloys. In: Scripta Materialia, 51 (7). 739 -743.

Roy, S (1994) Development of the zebrafish nervous system: Mechanisms of cellfate specifica­tion and axonal pathfinding in the central nervous system and periphery. In: Current science (Bangalore), 66 (9). 629 -633.

Roy, S (2011) Editorial optical computing circuits, devices and systems. In: Circuits, Devices & Systems, IET, 5 (2). pp. 73-75.

Roy, S and Sharma, A and Chaudhuri, A and Huang, Y and Langdon, TG and Suwas, S (2022) Microstructure evolution and mechanical response of a boron-modified Ti–6Al–4V alloy during high-pressure torsion processing. In: Materials Science and Engineering A, 860 .

Roy, Shibayan and Gurao, Nilesh and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Texture Evolution in Boron Modified Ti-6Al-4V Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 585-592.

Roy, Shibayan and Kannan, G and Suwas, Satyam and Surappa, MK (2015) Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)(m)-SiCp composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 624 . pp. 279-290.

Roy, Shibayan and Karanth, S and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: part II. static annealing in (alpha plus beta) regime. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3322-3336.

Roy, Shibayan and Madhavan, R and Suwas, Satyam (2014) Crystallographic texture and microstructure evolution during hot compression of Ti-6Al-4V-0.1B alloy in the (alpha plus beta)-regime. In: PHILOSOPHICAL MAGAZINE, 94 (4). pp. 358-380.

Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties. In: Materials & Design, 36 . pp. 529-539.

Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 composite laminates. In: JOURNAL OF MATERIALS SCIENCE, 47 (17). pp. 6402-6419.

Roy, Shibayan and Sarkar, Apu and Suwas, Satyam (2010) On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 528 (1). pp. 449-458.

Roy, Shibayan and Singh, Satyaveer D and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2011) Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086. In: Materials Science and Engineering A, 528 (29-30). pp. 8469-8478.

Roy, Shibayan and Suwas, Satyam (2013) Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy. In: Materials Science and Engineering: A, 574 . pp. 205-217.

Roy, Shibayan and Suwas, Satyam (2014) Enhanced superplasticity for (alpha plus beta)-hot rolled Ti-6Al-4V-0.1B alloy by means of dynamic globularization. In: MATERIALS & DESIGN, 58 . pp. 52-64.

Roy, Shibayan and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I. hot rolling in (alpha plus beta) phase field. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3303-3321.

Roy, Shibayan and Suwas, Satyam (2014) On the absence of shear cracking and grain boundary cavitation in secondary tensile regions of Ti-6Al-4V-0.1B alloy during hot (alpha plus beta)-compression. In: PHILOSOPHICAL MAGAZINE, 94 (5). pp. 447-463.

Roy, Shibayan and Suwas, Satyam (2017) Orientation dependent spheroidization response and macro-zone formation during sub beta-transus processing of Ti-6Al-4V alloy. In: ACTA MATERIALIA, 134 . pp. 283-301.

Roy, Shibayan and Suwas, Satyam (2018) Unique texture transition during sub beta-transus annealing of warm-rolled Ti-6Al-4V alloy: Role of orientation dependent spheroidization. In: SCRIPTA MATERIALIA, 154 . pp. 1-7.

Roy, Shibayan and Suwas, Satyam (2013) The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti-6Al-4V-0.1B. In: JOURNAL OF ALLOYS AND COMPOUNDS, 548 . pp. 110-125.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Miracle, DB and Srinivasan, R (2011) Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B. In: Acta Materialia, 59 (14). pp. 5494-5510.

Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S. and Srinivasan, R. and Miracle, D. B. (2012) Microstructure and texture evolution during beta extrusion of boron modified Ti-6A1-4V alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 540 . pp. 152-163.

Roy, Shibayan and Tungala, Vedavyas and Suwas, Satyam (2011) Effect of Hypoeutectic Boron Addition on the beta Transus of Ti-6Al-4V Alloy. In: Metallurgical and Materials Transactions A, 42A (9). pp. 2535-2541.

Roy, Soumitra and Divinski, Sergiy V and Paul, Aloke (2014) Reactive diffusion in the Ti-Si system and the significance of the parabolic growth constant. In: PHILOSOPHICAL MAGAZINE, 94 (7). pp. 683-699.

Roy, Soumitra and Paul, Aloke (2013) Diffusion in tungsten silicides. In: Intermetallics, 37 . pp. 83-87.

Roy, Soumitra and Paul, Aloke (2014) Growth of hafnium and zirconium suicides by reactive diffusion. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1309-1314.

Roy, Soumitra and Paul, Aloke (2014) Growth of hafnium and zirconium suicides by reactive diffusion. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1309-1314.

Roy, Soumitra and Paul, Aloke (2014) Reactive Diffusion in the Re-Si System. In: JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 35 (5). pp. 631-635.

Roy, Soumitra and Prasad, Soma and Divinski, Sergiy V and Paul, Aloke (2014) Diffusion pattern in MSi2 and M5Si3 silicides in group VB (M = V, Nb, Ta) and VIB (M = Mo, W) refractory metal-silicon systems. In: PHILOSOPHICAL MAGAZINE, 94 (14). pp. 1508-1528.

Roy, Syamantak and Hazra, Arpan and Bandyopadhyay, Arkamita and Raut, Devraj and Madhuri, Lakshmi P and Rao, Shankar DS and Ramamurty, Upadrasta and Pati, Swapan Kumar and Prasad, Krishna S and Maji, Tapas Kumar (2016) Reversible Polymorphism, Liquid Crystallinity, and Stimuli-Responsive Luminescence in a Bola-amphiphilic pi-System: Structure-Property Correlations Through Nanoindentation and DFT Calculations. In: JOURNAL OF PHYSICAL CHEMISTRY LETTERS, 7 (20). pp. 4086-4092.

Roy Barman, S and Gavit, P and Chowdhury, S and Chatterjee, K and Nain, A (2023) 3D-Printed Materials for Wastewater Treatment. In: JACS Au, 3 (11).

Royan, Saraswathy and Bhattacharya, DL (2008) Some cytoplasmic details of yeast revealed by the electron microscope. In: Journal of Indian Institute of Science, 88 (3). pp. 793-794.

Rudra, Moumin and Halder, Saswata and Saha, Sujoy and Dutta, Alo and Sinha, TP (2019) Temperature dependent conductivity mechanisms observed in Pr2NiTiO6. In: MATERIALS CHEMISTRY AND PHYSICS, 230 . pp. 277-286.

S

S, CS and Prabhu, TR and Moganraj, A and Samuel, MS and Praveenkumar, K and Bobby, SS and Prakasam, A (2024) Effect of heat treatment on microstructure and high-temperature wear performance of additive manufactured IN718. In: Journal of Manufacturing Processes, 127 . pp. 683-697.

Saadatfar, M and Mukherjee, M and Madadi, M and Schroeder-Turk, G E and Garcia-Moreno, F and Schaller, F M and Hutzler, S and Sheppard, A P and Banhart, J and Ramamurty, U (2012) Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression. In: ACTA MATERIALIA, 60 (8). pp. 3604-3615.

Sabapathy, Tamilarasan and Kiran, MSRN and Ayiriveetil, Arunbabu and Kar, Ajoy K and Ramamurty, U and Asokan, Sundarrajan (2013) Nanoindentation studies on waveguides inscribed in chalcogenide glasses using ultrafast laser. In: Optical Materials Express, 3 (6). pp. 684-690.

Sabat, R K and Samal, P K and Ahamed, Muzzamil S (2018) Effect of strain path on the evolution of microstructure, texture and tensile properties of WE43 alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 715 . pp. 348-358.

Sabat, RK and Brahme, AP and Mishra, RK and Inal, K and Suwas, S (2018) Ductility enhancement in Mg-0.2%Ce alloys. In: ACTA MATERIALIA, 161 . pp. 246-257.

Sabat, RK and Hatwal, S and Dixit, B and Suwas, Satyam (2013) Evolution of microstructure during hot deformation of pearlitic steel. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013 , Sydney, AUSTRALIA, pp. 459-462.

Sabat, RK and Mishra, RK and Sachdev, AK and Suwas, Satyam (2015) The deciding role of texture on ductility in a Ce containing Mg alloy. In: MATERIALS LETTERS, 153 . pp. 158-161.

Sabat, RK and Pavan, MVSSDS Surya and Aakash, DS and Kumar, M and Sahoo, SK (2018) Mechanism of texture and microstructure evolution during warm rolling of Ti-6Al-4V alloy. In: PHILOSOPHICAL MAGAZINE, 98 (28, A). pp. 2562-2581.

Sabban, R and Dash, K and Suwas, S and Murty, BS (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. In: Journal of the Indian Institute of Science .

Sabban, Rushikesh and Bahl, Sumit and Chatterjee, Kaushik and Suwas, Satyam (2019) Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness. In: ACTA MATERIALIA, 162 . pp. 239-254.

Sadashiv Rege, S and Dey, I and Sen Gupta, R and Ajnas N, M and Jose, R and Misra, A and Manna, K and Samanta, K and Bose, S (2024) Closed-loop circular economy in �upcycled� acrylonitrile�butadiene�styrene vitrimer. In: European Polymer Journal, 220 .

Sadhanala, Hari Krishna and Senapati, Subrata and Nanda, Karuna Kar (2018) Temperature sensing using sulfur-doped carbon nanoparticles. In: CARBON, 133 . pp. 200-208.

Sadhu, S and Chakraborty, A and Makineni, S and Bhattacharyya, S and Paul, A (2024) An experimental estimation method of diffusion coefficients in ternary and multicomponent systems from a single diffusion profile. In: Acta Materialia, 274 .

Sagar, KG and Suresh, PM and Sampathkumaran, P and Kishore, K (2023) Tribological studies on aluminum beryl composites subjected to ECAP process. In: Wear, 523 .

Sagar, PK and Banerjee, D and Muraleedharan, K and Prasad, YVRK (1996) High-temperature deformation processing of Ti-24Al-20Nb. In: Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 27 (9). pp. 2593-2604.

Sagar, PK and Banerjee, D and Prasad, YVRK (1997) Unstable flow during hot deformation of Ti-24Al-20Nb alloy. In: Materials Science and Technology, 13 (9). pp. 755-760.

Sagar, PK and Prasad, YVRK (1998) Hot deformation and microstructural evolution in an alpha(2)/O titanium aluminide alloy Ti-25Al-15Nb. In: Zeitschrift für Metallkunde, 89 (6). pp. 433-441.

Saha, BP and Johnson, R and Jayaram, V (2012) COMPARATIVE EVALUATION OF THERMAL CONDUCTIVITY OF ZIRCONIA SOLID AND HONEYCOMB STRUCTURES. In: EXPERIMENTAL HEAT TRANSFER, 25 (4). pp. 267-281.

Saha, RL and Jacob, KT and Misra, RDK and Nandy, TK (1990) Metal mould reactions during casting of titanium in zircon sand moulds. In: Transactions of the American Foundrymen's Society, 98 . pp. 253-260.

Saha, RL and Mukherji, D and Misra, RDK and Jacob, KT and Nandy, TK (1991) Zircon Sand--a Viable Alternative Moulding System for Titanium Castings. In: Transactions of the Indian Institute of Metals, 44 (1). pp. 53-61.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Microstructural changes induced by ternary additions in a hypo-eutectic titanium-silicon alloy. In: Journal of Materials Science (full set), 26 (10). pp. 2637-2644.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1990) On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 21 (3). pp. 559-566.

Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Reduction In Metal-Mold Reactivity In Titanium Castings Through The Use Of Sodium Aluminate As Binder In Zircon Sand Molds. In: Transactions of the Indian Institute of Metals, 44 (4). pp. 305-310.

Saha, S and Chanda, S and Dutta, A and Sinha, TP (2023) Insulator-To-metal transition in RCoO3(R = Pr, Nd). In: Journal of Advanced Dielectrics .

Saha, S and Singh, RP and Kumar, A and De, A and Pandey, P and Narayan, B and Basumatary, H and Senyshyn, AR and Ranjan, R (2020) Magnetic enhancement of ferroelectric polarization in a particulate multiferroic composite derived in situ via additive assisted sintering of a pseudo ternary alloy system BiFeO3-PbTiO3-DyFeO3. In: Applied Physics Letters, 116 (14).

Saha, S and Singh, RP and Liu, Y and Swain, AB and Kumar, A and Subramanian, V and Arockiarajan, A and Srinivasan, G and Ranjan, R and Ranjan, R (2021) Strain transfer in ferroelectric-ferrimagnetic magnetoelectric composite. In: Physical Review B, 103 (14).

Saha, S and Singh, RP and Rout, A and Mishra, A and Ali, A and Basumatary, H and Ranjan, R (2023) Inducing ferromagnetism and magnetoelectric coupling in the ferroelectric alloy system BiFeO3-PbTiO3via additives. In: Journal of Applied Physics, 133 (6).

Saha, S and Yaddanapudi, K and Channagiri, S and Muraleedharan, K and Banerjee, D (2022) N-polar GaN evolution on nominally on-axis c-plane sapphire by MOCVD Part-II: Microstructural investigation. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology .

Saha, S and Yaddanapudi, K and Muraleedharan, K and Raghavan, S and Banerjee, D (2018) GaN Growth Process by MOCVD Revisited: TEM Study of Microstructural Evolution Presented. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Saha, Sujoy and Chanda, Sadhan and Dutta, Alo and Kumar, Uday and Ranjan, Rajeev and Sinha, TP (2014) Dielectric relaxation and anti-ferromagnetic coupling of BiEu03 and BiGd03. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 360 . pp. 80-86.

Saha, U and Dutta, A and Konkati, C and Chakraborty, S and Dey, S and Chauhan, A and Srivastava, S and Gayathri, N and Mukherjee, P (2023) Microstructure and defect evolution in oxygen ion-irradiated pure nickel – Insights from experimental probes and molecular dynamics simulations. In: Materials Chemistry and Physics, 305 .

Sahana, M and Singh, RN and Shivakumara, C and Vasanthacharya, NY and Hegde, MS and Subramanian, S and Prasad, V and Subramanyam, SV (1997) Colossal magnetoresistance in epitaxial $La_(_1_-_x_-_y_)$$Na_y$$MnO_3$ thin film. In: Applied Physics Letters, 70 (21). pp. 2909-2911.

Sahaym, Uttara and Talebanpour, Babak and Seekins, Sean and Dutta, Indranath and Kumar, Praveen and Borgesen, Peter (2013) Recrystallization and Ag3Sn Particle Redistribution During Thermomechanical Treatment of Bulk Sn-Ag-Cu Solder Alloys. In: IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 3 (11). pp. 1868-1875.

Sahoo, S and Pradhan, DK and Kumari, S and Samantaray, KS and Singh, C and Mishra, A and Rahaman, MM and Behera, B and Kumar, A and Thomas, R and Rack, PD and Pradhan, DK (2023) Compositional induced structural phase transitions in (1 � x)(K0.5Na0.5)NbO3�x(Ba0.5Sr0.5)TiO3 ferroelectric solid solutions. In: Scientific Reports, 13 (1).

Sahoo, Subash Chandra and Sinha, Shashi Bhushan and Kiran, MSRN and Ramamurty, Upadrasta and Dericioglu, Arcan F and Reddy, Malla C and Naumov, Pance (2013) Kinematic and Mechanical Profile of the Self-Actuation of Thermosalient Crystal Twins of 1,2,4,5-Tetrabromobenzene: A Molecular Crystalline Analogue of a Bimetallic Strip. In: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 135 (37). pp. 13843-13850.

Sahu, G and Das, M and Sethy, C and Wazalwar, R and Kundu, CN and Raichur, AM and Tripathy, J (2021) Ionic liquid-assisted fabrication of poly(vinyl alcohol)/nanosilver/graphene oxide composites and their cytotoxicity/antimicrobial activity. In: Materials Chemistry and Physics, 266 .

Sahu, KK and Lahiri, AK (2004) Finding the insphere of a convex polyhedron: an analytical approach. In: Philosophical Magazine, 84 (12). pp. 1185-1196.

Sahu, M and Narasimhan, L and Raichur, AM and Sover, A and Ciobanu, RC and Lucanu, N and Aradoaei, M (2021) Improving fracture toughness of tetrafunctional epoxy with functionalized 2D molybdenum disulfide nanosheets. In: Polymers, 13 (24).

Sahu, M and Raichur, AM (2022) Synergistic effect of nanotextured graphene oxide modified with hollow silica microparticles on mechanical and thermal properties of epoxy nanocomposites. In: Composites Part B: Engineering, 245 .

Sahu, Megha and Narashimhan, Lakshmi and Prakash, Om and Raichur, Ashok M (2017) Noncovalently Functionalized Tungsten Disulfide Nanosheets for Enhanced Mechanical and Thermal Properties of Epoxy Nanocomposites. In: ACS APPLIED MATERIALS & INTERFACES, 9 (16). pp. 14347-14357.

Sahu, Megha and Raichur, Ashok M (2019) Toughening of high performance tetrafunctional epoxy with poly(allyl amine) grafted graphene oxide. In: COMPOSITES PART B-ENGINEERING, 168 . pp. 15-24.

Sahu, RR and Ramasamy, AS and Bhonsle, S and Vailshery, M and Archana, S and Kumar, H and Das Gupta, T (2024) Single-step fabrication of liquid gallium nanoparticles via capillary interaction for dynamic structural colours. In: Nature Nanotechnology .

Sahu, SK and Rama Sreekanth, PS and Muchhala, D (2023) Design of Thin Wall Composite Structures for Energy Absorption Applications. [Book Chapter]

Sai, NJ and Rathore, P and Chauhan, A (2023) Machine learning-based predictions of fatigue life for multi-principal element alloys. In: Scripta Materialia, 226 .

Sai, NJ and Rathore, P and Sridharan, K and Chauhan, A (2023) Machine learning-based predictions of yield strength for neutron-irradiated ferritic/martensitic steels. In: Fusion Engineering and Design, 195 .

Sai Jyotheender, K and Punith Kumar, MK and Srivastava, C (2021) Influence of surfactant polarity on the evolution of micro-texture, grain boundary constitution and corrosion behavior of electrodeposited Zn coatings. In: Surface and Coatings Technology, 423 .

Sai Jyotheender, K and Punith Kumar, MK and Srivastava, C (2021) Low temperature electrogalvanization: Texture and corrosion behavior. In: Applied Surface Science, 559 .

Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 14 (5). pp. 445-457.

Saiphaneendra, B and Saxena, Tejas and Singh, Satyapaul A and Madras, Giridhar and Srivastava, Chandan (2017) Synergistic effect of co-existence of hematite (α-Fe 2 O 3 ) and magnetite (Fe 3 O 4 ) nanoparticles on graphene sheet for dye adsorption. In: Journal of Environmental Chemical Engineering, 5 (1). pp. 26-37. ISSN 22133437

Saiphaneendra, Bachu and Srivastava, Avi Krishna and Srivastava, Chandan (2016) Synthesis of Multimetal-Graphene Composite by Mechanical Milling. In: JOM, 68 (10). pp. 2574-2578.

Saiphaneendra, Bachu and Srivastava, Chandan (2017) Synthesis of Graphene-Magnetite Nanoparticle Composite Using Mechanical Milling and Electrochemical Exfoliation. In: JOM, 69 (7). pp. 1143-1148.

Saito, M and Jacob, KT and Waseda, Y (1999) Local environmental structures of Mo in the superionic conducting glass (AgI)(0.6)(Ag2MoO4)(0.4) by anomalous X-ray scattering. In: High Temperature Materials and Processes, 18 (1-2). pp. 21-26.

Saito, M and Sugiyama, K and Matsubara, E and Jacob, KT and Waseda, Y (1995) Anomalous X-ray scattering study of local structures in the superionic conducting class (CuI)(0.3)(Cu2O)(0.35)(MoO3)(0.35). In: Materials Transactions, JIM, 36 (12). pp. 1434-1439.

Saito, M and Wakeshima, M and Sato, N and Fujino, T and Waseda, Y and Matsubara, E and Jacob, KT (1994) The structure of amorphous platinum disulfide as studied by anomalous x-ray-scattering. In: Zeitschrift für Naturforschung - A, 49 (11). 1031-1036 .

Salas, O and Ni, H and Jayaram, V and Vlach, KC and Levi, CG and Mehrabian, R (1991) Nucleation and growth of Al2O3/metal composites by oxidation of aluminum alloys. In: Journal of Materials Research, 6 (9). pp. 1964-1981.

Samajdar, S and Kishore, * (1991) Fracture surface characterization of epoxy-based GFRP laminates. In: Journal of Materials Science, 26 (4). pp. 977-984.

Samant, Anoop N and Du, Baoshuai and Paital, Sameer and Kumar, S and Dahotre, Narendra B (2009) Pulsed laser surface treatment of magnesium alloy: Correlation between thermal model and experimental observations. In: Journal of Materials Processing Technoogy, 209 (11). pp. 5060-5067.

Samanta, S and Gangavarapu, S and Jayabalan, B and Makineni, SK and Dutta, M and Singh, SB (2023) Atomic-scale investigation of H-trapping by fine NbC precipitates in a low C ferritic steel. In: Scripta Materialia, 234 .

Samantaray, Dipti and Chaudhuri, Atanu and Borah, Utpal and Bhaduri, AK and Dutta, Pradip (2016) Role of grain boundary ferrite layer in dynamic recrystallization of semi-solid processed type 304L austenitic stainless steel. In: MATERIALS LETTERS, 179 . pp. 65-68.

Samantaray, Kumar Paresh and Madras, Giridhar and Bose, Suryasarathi (2019) Water Remediation Aided by a Graphene-Oxide-Anchored Metal Organic Framework through Pore- and Charge-Based Sieving of Ions. In: ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 7 (1). pp. 1580-1590.

Samantaray, PK and Baloda, S and Madras, G and Bose, S (2019) Interlocked Dithi-Magnetospheres–Decorated MoS2 Nanosheets as Molecular Sieves and Traps for Heavy Metal Ions. In: Advanced Sustainable Systems, 3 (6).

Samantaray, PK and Indrakumar, S and Chatterjee, K and Agarwal, V and Bose, S (2020) 'Template-free' hierarchical MoS2foam as a sustainable 'green' scavenger of heavy metals and bacteria in point of use water purification. In: Nanoscale Advances, 2 (7). pp. 2824-2834.

Samantaray, PK and Kumar, S and Bose, S (2020) �Polycation� modified PVDF based antibacterial and antifouling membranes and �point-of-use supports� for sustainable and effective water decontamination. In: Journal of Water Process Engineering, 38 .

Samantaray, PK and Madras, G and Bose, S (2019) The Key Role of Modifications in Biointerfaces toward Rendering Antibacterial and Antifouling Properties in Polymeric Membranes for Water Remediation: A Critical Assessment. In: Advanced Sustainable Systems, 3 (10).

Samantaray, PK and Madras, G and Bose, S (2019) Microbial Biofilm Membranes for Water Remediation and Photobiocatalysis. In: ACS Symposium Series, 1329 . pp. 321-351.

Samantaray, Paresh Kumar and Baloda, Sonika and Madras, Giridhar and Bose, Suryasarathi (2019) Nanodelivery in Scrolls-Based Nanocarriers: Efficient Constructs for Sustainable Scavenging of Heavy Metal Ions and Inactivate Bacteria. In: ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 7 (23). pp. 18775-18784.

Samantaray, Paresh Kumar and Baloda, Sonika and Madras, Giridhar and Bose, Suryasarathi (2018) A designer membrane tool-box with a mixed metal organic framework and RAFT-synthesized antibacterial polymer perform in tandem towards desalination, antifouling and heavy metal exclusion. In: JOURNAL OF MATERIALS CHEMISTRY A, 6 (34). pp. 16664-16679.

Samantaray, Paresh Kumar and Madras, Giridhar and Bose, Suryasarathi (2018) PVDF/PBSA membranes with strongly coupled phosphonium derivatives and graphene oxide on the surface towards antibacterial and antifouling activities. In: JOURNAL OF MEMBRANE SCIENCE, 548 . pp. 203-214.

Samantray, R and Priyadarshinee, M and Rajendrachari, S (2024) General Job Opportunities for the Graduates, Post Graduates and PhD Graduates in Additive Manufacturing Industries. [Book Chapter]

Sampath, V and Dwarakadasa, ES (1992) Effect Of Electroslag Refining On Microstructure And Mechanical-Properties Of Is-7670 Alloy. In: Scandinavian Journal of Metallurgy, 21 (6). pp. 266-278.

Sampath, V and Dwarakadasa, ES (1993) A Study of The Fatigue, Impact and fracture-Toughness Characteristics of Electroslag Refined IS-7670 Alloy. In: Canadian Metallurgical Quarterly, 32 (1). pp. 57-67.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Processes-Induced Structural Transformations and the Impact Properties of Cr-Mn Iron Systems. In: Materials and Manufacturing Processes, 23 (3). pp. 320-325.

Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (1999) Dry Sliding Wear Behavior of Glass-Epoxy Composite. In: Journal of Reinforced Plastics and Composites, 18 (1). pp. 55-62.

Sampathkumaran, P and Kishore, * and Seetharamu, S and Pattanashetti, VV and Kumar, Shekhar M and Niranjan, HB (2015) Fly ash cenospheres as reinforcement in different polymer composites - a comparative study of physical and mechanical properties. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 22 (3). pp. 354-362.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2011) Chromium-manganese iron alloy system design cast in metal and sand moulds for erosion resistance: a positron lifetime study. In: International Journal of Advanced Manufacturing Technology, 52 (1-4). pp. 45-52.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Effect of increased manganese addition and mould type on the slurry erosion characteristics of Cr-Mn iron systems. In: Bulletin of Materials Science, 31 (7). pp. 1001-1006.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2009) The effects of manganese content and mould size on abrasion and slurry erosion behaviour of chromium-manganese iron systems investigated by positron lifetime spectroscopy. In: Wear, 267 (9-10). pp. 1558-1565.

Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK and Kishore, * (1998) Sliding wear studies in glass-epoxy system through scanning microscopic observations. In: Bulletin of Materials Science, 21 (4). pp. 335-339.

Sandhyarani, M and Ashfaq, M and Arunnellaiappan, T and Selvan, MP and Subramanian, S and Rameshbabu, N (2015) Effect of electrical parameters on morphology and in-vitro corrosion resistance of plasma electrolytic oxidized films formed on zirconium. In: SURFACE & COATINGS TECHNOLOGY, 269 . pp. 286-294.

Sankar, Magesh and Suwas, Satyam and Balasubramanian, Subramanian and Manivasagam, Geetha (2017) Comparison of electrochemical behavior of hydroxyapatite coated onto WE43 Mg alloy by electrophoretic and pulsed laser deposition. In: SURFACE & COATINGS TECHNOLOGY, 309 . pp. 840-848.

Sankaran, S and Madhavan, R and Suwas, S and Ray, RK and Padmanabhan, KA (2022) Microstructural evolution and stability during strain-controlled fatigue in a multiphase microalloyed steel. In: Materials Science and Engineering A, 861 .

Sankaranarayanan, S and Nayak, Pranav U and Sabat, RK and Suwas, S and Almajid, A and Gupta, M (2014) Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response. In: JOURNAL OF ALLOYS AND COMPOUNDS, 615 . pp. 211-219.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Almajid, A and Gupta, M (2015) Mg/BN nanocomposites: Nano-BN addition for enhanced room temperature tensile and compressive response. In: JOURNAL OF COMPOSITE MATERIALS, 49 (24). pp. 3045-3055.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2013) Effect of hybridizing micron-sized Ti with nano-sized SiC on the microstructural evolution and mechanical response of Mg-5.6Ti composite. In: Journal of Alloys and Compounds, 575 . pp. 207-217.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2014) Effect of nanoscale boron carbide particle addition on the microstructural evolution and mechanical response of pure magnesium. In: MATERIALS & DESIGN, 56 . pp. 428-436.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2014) Microstructural evolution and mechanical properties of Mg composites containing nano-B4C hybridized micro-Ti particulates. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1178-1190.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Walker, Stefan and Suwas, S and Gupta, M (2014) Using heat treatment effects and EBSD analysis to tailor microstructure of hybrid Mg nanocomposite for enhanced overall mechanical response. In: MATERIALS SCIENCE AND TECHNOLOGY, 30 (11). pp. 1309-1320.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (1999) Symmetry-breaking transitions in equilibrium shapes of isolated, coherent particles in cubic crystals. In: Proceedings of the International Conference on Solid-Solid Phase Transformations '99, 24-28 May 1999, Kyoto, Japan, pp. 709-712.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (2002) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity. In: Metallurgical and Materials Transactions A, 33 (4). pp. 1083-1090.

Sanphui, Palash and Mishra, Manish Kumar and Ramamurty, Upadrasta and Desiraju, Gautam R (2015) Tuning Mechanical Properties of Pharmaceutical Crystals with Multicomponent Crystals: Voriconazole as a Case Study. In: MOLECULAR PHARMACEUTICS, 12 (3). pp. 889-897.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (1999) Adsorption and electrokinetic studies on alumina suspensions using poly(vinyl alcohol). In: Minerals & Metallurgical Processing, 16 (2). pp. 51-55.

Santhiya, D and Nandini, G and Subramanian, S and Natarajan, KA and Malghan, SG (1998) Effect of polymer molecular weight on the adsorption of polyacrylic acid at the alumina-water interface. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 1572-163.

Santhiya, D and Subramanian, S and Natarajan, KA (2000) Surface Chemical Studies on Galena and Sphalerite in the Presence of Thiobacillus Thiooxidans with Reference to Mineral Beneficiation. In: Minerals Engineering, 13 (7). pp. 747-763.

Santhiya, D and Subramanian, S and Natarajan, KA (2001) Surface Chemical Studies on Sphalerite and Galena Using Bacillus polymyxa I. Microbially Induced Mineral Separation. In: Journal of Colloid and Interface Science, 235 (2). pp. 289-297.

Santhiya, D and Subramanian, S and Natarajan, KA (2001) Surface Chemical Studies on Sphalerite and Galena Using Bacillus polymyxa II. Mechanisms of Microbe–Mineral Interactions. In: Journal of Colloid and Interface Science, 235 (2). pp. 298-309.

Santhiya, D and Subramanian, S and Natarajan, KA (2002) Surface chemical studies on sphalerite and galena using extracellular polysaccharides isolated from Bacillus polymyxa. In: Journal of Colloid and Interface Science, 256 (2). pp. 237-248.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (2000) Surface chemical studies on alumina suspensions using ammonium poly(methacrylate). In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 164 (2-3). pp. 143-154.

Santhiya, D and Subramanian, S and Natarajan, KA and Malghan, SG (1999) Surface chemical studies on the competitive adsorption of poly(acrylic acid) and poly(vinyl alcohol) onto alumina. In: Journal of Colloid and Interface Science, 216 (1). pp. 143-153.

Santhiya, D and Subramanian, S and Natarajan, KA and Rao, Hanumantha K and Forssberg, KSE (2001) Bio-modulation of galena and sphalerite surfaces using Thiobacillus thiooxidans. In: International Journal of Mineral Processing, 62 (1-4). pp. 121-141.

Santhy, K and Vamsi, KV and Karthikeyan, S (2019) Modelling of Ni3(Ti,V) system through first-principle calculations. In: 10th International Conference of Materials Processing and Characterization, ICMPC 2020, 21-23, February 2020, India, pp. 278-281.

Santosh, Vani and Kumar, VR Praveen and Thota, Balaram and Shastry, Arun and Arivazhagan, A and Thennarasu, K and Kondaiah, Paturu (2013) CRITICAL ROLE OF IGFBP ISOFORMS AND THEIR DOWNSTREAM SIGNALING PATHWAYS IN GLIOBLASTOMA PATHOGENESIS. In: NEURO-ONCOLOGY, 15 (3). p. 162.

Santra, A and Prakash, R and Maity, S and Nilawar, S and Chatterjee, K and Maiti, P (2024) Core-Shell Structure of Photopolymer-Grafted Polyurethane as a Controlled Drug Delivery Vehicle for Biomedical Application. In: ACS Applied Materials and Interfaces, 16 (14). pp. 17193-17207.

Santra, S and Makineni, S K and Suwas, S and Chattopadhyay, K and Paul, A (2016) Role of Ti on growth, morphology and microtexture evolution of A15-based V3Ga superconductor by bronze technique. In: MATERIALS & DESIGN, 110 . pp. 404-413.

Santra, S and Makineni, SK and Shankar, G and Suwas, S and Chattopadhyay, K and Divinski, SV and Paul, A (2019) Insight into the effect of Ti-addition on diffusion-controlled growth and texture of Nb 3 Sn intermetallic superconductor phase. In: Materialia, 6 .

Santra, Sangeeta and Dong, Hongqun and Laurila, Tomi and Paul, Aloke (2014) Role of different factors affecting interdiffusion in Cu(Ga) and Cu(Si) solid solutions. In: PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 470 (2161).

Santra, Sangeeta and Islam, Sarfaraj and Ravi, Raju and Vuorinen, Vesa and Laurila, Tomi and Paul, Aloke (2014) Phase Evolution in the AuCu/Sn System by Solid-State Reactive Diffusion. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (9). pp. 3357-3371.

Santra, Sangeeta and Mondal, Avik and Paul, Aloke (2012) Interdiffusion in the Fe-Pt System. In: Metallurgical and Materials Transactions A, 43A (3). pp. 791-795.

Santra, Sangeeta and Paul, Aloke (2014) Diffusion of components via different modes during growth of the A15-V(3)Gaphase. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (8). pp. 487-494.

Santra, Sangeeta and Paul, Aloke (2016) Effect of Ga content in Cu(Ga) on the growth of V3Ga following bronze technique. In: INTERMETALLICS, 70 . pp. 1-6.

Santra, Sangeeta and Paul, Aloke (2013) Effect of Ti concentration on the growth of Nb3Sn between solid Nb(Ti) and liquid Sn. In: Journal of Electronic Materials, 42 (8). pp. 2716-2723.

Santra, Sangeeta and Paul, Aloke (2015) Estimation of intrinsic diffusion coefficients in a pseudo-binary diffusion couple. In: SCRIPTA MATERIALIA, 103 . pp. 18-21.

Santra, Sangeeta and Paul, Aloke (2015) Role of the Molar Volume on Estimated Diffusion Coefficients. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (9). pp. 3887-3899.

Santra, Sangeeta and Paul, Aloke (2012) Vacancy wind effect on interdiffusion in a dilute Cu(Sn) solid solution. In: PHILOSOPHICAL MAGAZINE LETTERS, 92 (8). pp. 373-383.

Santra, Sangeeta and Suwas, Satyam and Paul, Aloke (2015) Effect of Nb orientation and deformation on the growth of Nb3Sn intermetallic superconductor by bronze technique. In: PHILOSOPHICAL MAGAZINE LETTERS, 95 (10). pp. 504-510.

Sar, DK and Nanda, KK (2010) Melting and superheating of nanowires-a nanotube approach. In: Nanotechnology, 21 (20).

Saraf, S and Jain, A and Tiwari, A and Verma, A and Panda, PK and Jain, SK (2020) Advances in liposomal drug delivery to cancer: An overview. In: Journal of Drug Delivery Science and Technology, 56 .

Saraf, S and Jain, A and Tiwari, AK and Verma, AK and Jain, SK (2020) Engineered liposomes bearing camptothecin analogue for tumour targeting: in vitro and ex-vivo studies. In: Journal of Liposome Research .

Saravanan, L and Subramanian, S (2016) Surface chemical properties and selective flocculation studies on alumina and silica suspensions in the presence of xanthan gum. In: MINERALS ENGINEERING, 98 . pp. 213-222.

Saravanan, L and Subramanian, S (2005) Surface chemical studies on the competitive adsorption of poly(ethylene glycol) and ammonium poly(methacrylate) onto alumina. In: Journal of Colloid and Interface Science, 284 (2). pp. 363-377.

Saravanan, RA and Samajdar, I and Surappa, MK (1998) Microstructural characterisation of the subsurface plastic zone formed during erosion of A356 AI alloy and composites. In: Wear, 215 (1-2). pp. 223-231.

Saravanan, RA and Surappa, MK (2000) Fabrication and characterisation of pure magnesium-30 vol.% $SiC_P$ particle composite. In: Materials Science & Engineering A, 276 (1-2). pp. 108-116.

Saravanan, RA and Surappa, MK and Bai, BNP (1997) Erosion of A356 $Al-SiC_{\mu}$ composites due to multiple particle impact. In: Wear, 202 (2). pp. 154-164.

Saravanan, S and Athira, CM and Ramamurth, PC (2019) Tin disulphide based electrochemical sensor for lead ions detection in water. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.

Saravanan, S and Gowda, Akshay KM and Ramamurthy, Praveen C and Madras, Giridhar (2016) Influence of Mesoporous Silica and Butyral Content on the Mechanical, Water Absorption, and Permeability Properties of in situ Synthesized Silica/PVB Nanocomposite Films. In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 55 (12). pp. 1220-1230.

Saravanan, S and Gowda, Akshay KM and Varman, Arul K and Ramamurthy, Praveen C and Madras, Giridhar (2015) In-situ synthesized poly(vinyl butyral)/MMT-clay nanocomposites: The role of degree of acetalization and clay content on thermal, mechanical and permeability properties of PVB matrix. In: COMPOSITES SCIENCE AND TECHNOLOGY, 117 . pp. 417-427.

Saravanan, S and Gupta, Satyajit and Ramamurthy, Praveen C and Madras, Giridhar (2014) Effect of silane functionalized alumina on poly(vinyl butyral) nanocomposite films: Thermal, mechanical, and moisture barrier studies. In: POLYMER COMPOSITES, 35 (7). pp. 1426-1435.

Saravanan, S and Kishore, Kishore and Ramamurthy, Praveen C and Madras, Giridhar (2014) Aminosilane Functionalized Cenosphere in Poly(vinyl butyral) Composite Films: Moisture Resistant Encapsulated Schottky Devices. In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 53 (7). pp. 684-692.

Saravanan, S and Km, AG and Kn, SS and Ramamurthy, PC (2019) The role of Na+, Zn2+ cations on the mechanical, thermal and moisture permeation behaviors of poly(vinyl butyral) based ionomeric films. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.

Saravanan, S and Mathai, Joseph C and Anantharaman, MR and Venkatachalam, S and Avasthi, DK and Singh, F (2005) Photoluminescence studies on RF plasma-polymerized thin films. In: Synthetic Metals, 155 (2). pp. 311-315.

Saravanan, S and Ramamurthy, Praveen C and Madras, Giridhar (2015) Effects of temperature and clay content on water absorption characteristics of modified MMT clay/cyclic olefin copolymer nanocomposite films: Permeability, dynamic mechanical properties and the encapsulated organic device performance. In: COMPOSITES PART B-ENGINEERING, 73 . pp. 1-9.

Saravanan, S and Ramamurthy, Praveen C and Madras, Giridhar (2014) The influence of mesoporous silica in low T-g cyclic olefin copolymer nanocomposite films: Mechanical and moisture barrier studies. In: COMPOSITES SCIENCE AND TECHNOLOGY, 96 . pp. 80-87.

Saravanan, S and Srinivas, Hari G and Jayaram, V and Paulraj, M and Asokan, S (2008) Synthesis and characterization of $Y_3Al_5O_{12}$ and $ZrO_2–Y_2O_3$ thermal barrier coatings by combustion spray pyrolysis. In: Surface and Coatings Technology, 202 (19). pp. 4653-4659.

Sarkar, A and Barat, P (2008) Effect of Meditation on Scaling Behavior and Complexity of Human Heart Rate Variability. In: Fractals (FRACTALS), 16 (3). pp. 199-208.

Sarkar, J and Prasad, YVRK and Surappa, MK (1993) The constitutive flow behavior of 6061Al-SiCp composites at elevated temperature. In: International Conference on Composite Material, 1993, pp. 240-246.

Sarkar, S and Gupta, GS (2007) Development of a Two-Dimensional Mathematical Model for Stress and Velocity Distribution in a Packed Bed. In: Metallurgical and Materials Transactions B, 38 (6). pp. 965-975.

Sarkar, Sabita and Gupta, Govind Sharan and Kitamura, Shin-ya (2007) Prediction of raceway shape and size. In: ISIJ International, 47 (12). pp. 1738-1744.

Sarkar, Abdus Salam and Rao, Arun D and Jagdish, A K and Gupta, Abhishek and Nandi, Chayan Kanti and Ramamurthy, Praveen C and Pal, Suman Kalyan (2018) Facile embedding of gold nanostructures in the hole transporting layer for efficient polymer solar cells. In: ORGANIC ELECTRONICS, 54 . pp. 148-153.

Sarkar, Apu and Bhowmik, Ayan and Suwas, Satyam (2009) Microstructural characterization of ultrafine-grain interstitial-free steel by X-ray diffraction line profile analysis. In: Applied Physics A-Materials Science & Processing, 94 (4). pp. 943-948.

Sarkar, Apu and Roy, Shibayan and Suwas, Satyarn (2011) X-ray diffraction line profile analysis of deformation microstructure in boron modified Ti-6Al-4V alloy. In: Materials Characterization, 62 (1). pp. 35-42.

Sarkar, J (1995) Aspects of strengthening and work hardening in particulate metal matrix composites. In: Scripta Metallurgica et Materialia, 32 (1). pp. 37-42.

Sarkar, J and Prasad, YVRK and Surappa, MK (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. In: Journal of Materials Science (full set), 30 (11). pp. 2843-2848.

Sarkar, Kishor and Banerjee, Sovan Lal and Kundu, PP and Madras, Giridhar and Chatterjee, Kaushik (2015) Biofunctionalized surface-modified silver nanoparticles for gene delivery. In: JOURNAL OF MATERIALS CHEMISTRY B, 3 (26). pp. 5266-5276.

Sarkar, Kishor and Madras, Giridhar and Chatterjee, Kaushik (2015) Dendron conjugation to graphene oxide using click chemistry for efficient gene delivery. In: RSC ADVANCES, 5 (62). pp. 50196-50211.

Sarkar, Kishor and Meka, Sai Rama Krishna and Bagchi, Amrit and Krishna, NS and Ramachandra, SG and Madras, Giridhar and Chatterjee, Kaushik (2014) Polyester derived from recycled poly(ethylene terephthalate) waste for regenerative medicine. In: RSC ADVANCES, 4 (102). pp. 58805-58815.

Sarkar, Kishor and Meka, Sai Rama Krishna and Madras, Giridhar and Chatterjee, Kaushik (2015) A self-assembling polycationic nanocarrier that exhibits exceptional gene transfection efficiency. In: RSC Advances, 5 (111). pp. 91619-91632.

Sarkar, P and Ghosh, S and Saha, R and Sarkar, K (2021) RAFT polymerization mediated core-shell supramolecular assembly of PEGMA-co-stearic acid block co-polymer for efficient anticancer drug delivery. In: RSC Advances, 11 (28). pp. 16913-16923.

Sarkar, S and Gupta, GS (2006) Theoretical study of stress distribution under gas cross flow condition. In: ICAMMP-2006, 3rd to 5th Feb 2006, IIT Kharagpur, India.

Sarkar, S and Gupta, GS (2008) Two-Dimensional Mathematical Modeling of the Pack Carburizing Process. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2424-2434.

Sarkar, S and Gupta, GS and Litster, JD and Rudolph, V and White, ET and Choudhary, SK (2003) A cold model study of raceway hysteresis. In: Metallurgical and Materials Transactions B, 34 (2). pp. 183-191.

Sarkar, S and Sinha, SK and Palaniswamy, D and Srivastava, C and Chattopadhyay, K (2023) Evolution of L12 Ordered Precipitates in Cu–Fe–Si Alloy System and Its Influence on Potential Strength–Conductivity Properties. In: Metallography, Microstructure, and Analysis .

Sarkar, Suman and Srivastava, Chandan and Chattopadhyay, Kamanio (2018) Development of a new class of high strength copper alloy using immiscibility route in Cu-Fe-Si system: Evolution of hierarchical multi-scale microstructure. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 273 . pp. 38-47.

Sarvamangala, H and Gopal, J and Muraleedharan, P and George, RP and Dayal, RK and Natarajan, KA (2008) Biomineralization of manganese by Bacillus spp isolated from a marine biofilm. In: Minerals and Metallurgical Processing, 25 (3). pp. 149-155.

Sarvamangala, H and Natarajan, KA (2009) Microbially induced flotation of galena and quartz from pyrite. In: 18th International Biohydrometallurgy Symposium Bariloche, SEP 13-17, 2009, Bariloche, ARGENTINA, pp. 509-512.

Sarvamangala, H and Braun, JJ and Natarajan, KA and Subramanian, S (2006) A strategy for isolation, culturing and maintenance of Acidithiobacillus ferrooxidans and Leptospirillum ferrooxidans for enhanced bioleaching. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Sarvamangala, H and Natarajan, KA (2011) Microbially induced flotation of alumina, silica/calcite from haematite. In: International Journal of Mineral Processing, 99 (1-4). pp. 70-77.

Sarvamangala, H and Natarajan, KA and Girisha, ST (2013) Microbially-induced pyrite removal from galena using Bacillus subtilis. In: International Journal of Mineral Processing, 120 . pp. 15-21.

Sastri, P and Lahiri, AK (1983) A 'central atoms' model for binary silicate and aluminate melts. In: Physics and Chemistry of Glasses, 24 (4). pp. 98-103.

Sastri, P and Lahiri, AK (1985) Applicability of central atoms models to binary silicate and aluminate melts. In: Metallurgical and Materials Transactions B, 16 (2). 325 -331.

Sastri, P and Lahiri, AK (1986) "Central Atoms" models for ternary silicate and alumino-silicate melts. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 17 (1). pp. 105-110.

Sastry, DH and Murthy, Gunturi S (1986) Impression creep behavior of metals at high temperatures. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 369-379.

Sastry, DH and Shastry, CV and Tangri, K (1977) Is there an athermal region of plastic flow in metals at intermediate temperatures? In: Philosophical Magazine, 35 (4). 1099 -1103.

Sastry, DH and Prasad, YVKR and Vasu, KI (1970) Reply to comments on 'STacking fault energies of close-packed hexagonal metals'. In: Scripta Metallurgica, 4 (5). pp. 347-348.

Sastry, DH and Prasad, YVRK and Deevi, SC (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy. In: Materials Science and Engineering A, 299 (1-2). 157 -163.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) Low-temperature deformation behaviour of polycrystalline copper. In: Journal of Materials Science, 6 (12). pp. 1433-1440.

Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the low temperature deformation mechanism in polycrystalline cadmium. In: Acta Metallurgica, 17 (12). pp. 1453-1457.

Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the stacking fault energies of some close-packed hexagonal metals. In: Scripta Metallurgica, 3 (12). pp. 927-929.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium. In: Journal of Materials Science, 6 (4). pp. 332-341.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, P Rama (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformatio. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, PR (1973) Orientation Of Grain-Boundaries In Cadmium Recrystallized During Hot Deformation. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Shastry, CV (1979) Cottrell-Stokes law during high temperature deformation of alpha-iron. In: Physica Status Solidi A, 53 (1). K5-K7.

Sastry, DH and Vasu, KI (1972) Dislocation dynamics in alpha titanium Dynamique des dislocations dans le titane alphaVersetzungsdynamik in alpha-Titan. In: Acta Metallurgica, 20 (3). pp. 399-405.

Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Cold model study of raceway under mixed particle conditions. In: Ironmaking & Steelmaking, 30 (1). pp. 61-65.

Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Void formation and breaking in a packed bed. In: ISIJ International, 43 (2). pp. 153-160.

Sastry, SD and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1980) Preparation and Mechanical Processing of Fe -- 12Cr-6Al Ferritic Stainless Steel. In: Metals Technology, 7 (OCT). 393-396 .

Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel. In: Journal of Materials Science, 17 (10). pp. 3009-3016.

Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1979) Mechanism of strengthening in high temperature treated Fe---12Cr---6Al ferritic stainless steel. In: Scripta Metallurgica, 13 (9). pp. 817-822.

Satapathy, LN and Chokshi, AH (2005) Microstructural Development and Creep Deformation in an Alumina-5% Yttrium Aluminum Garnet Composite. In: Journal of The American Ceramic Society, 88 (10).

Satapathy, Ashok K and Behera, Santosh Kumar and Kumar, Rajeev and Sandhya, K L and Yelamaggad, C V and Sahoo, Balaram (2018) Excited state intramolecular proton transfer emission in bent core liquid crystals. In: JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY, 358 . pp. 186-191.

Satapathy, LN and Chokshi, AH (2003) Effect of spinel second phase on high temperature deformation in alumina. In: Materials Science Forum, 447-4 . pp. 341-345.

Satapathy, LN and Kottada, RS and Chokshi, AH (1999) An Experimental Technique For Fabricating Tensile Ceramic Specimens. In: Scripta Materialia, 41 (10). pp. 1091-1095.

Satapathy, LN and Swaroop, S (2005) Role of small amount of MgO and $ZrO_{2}$ on creep behaviour of high purity $Al_{2}O_{3}$. In: Bulletin of Materials Science, 28 (3). pp. 281-285.

Satheesh, K and Tomar, G (2022) Impact of elastic capsules on a solid wall. In: European Physical Journal: Special Topics .

Satheesh Kumar, KV and Bindu, M and Suresh, S and Anil, A and Sujoy, S and Mohanan, A and Periyat, P (2023) Investigation on swelling behavior of sodium alginate/black titania nanocomposite hydrogels and effect of synthesis conditions on water uptake. In: Results in Engineering, 20 .

Sathiaraj, GD and Kalsar, R and Kumar, SSS and Suwas, S and Skrotzki, W (2019) Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy. In: 2019 International Conference on Materials and Manufacturing Methods, MMM 2019, 5-7 July 2019, Tiruchirapalli; India, pp. 2147-2151.

Satyalakshmi, KM and Mallya, RM and Ramanathan, KV and Wu, XD and Brainard, B and Gautier, DC and Vasanthacharya, NY and Hegde, MS (1993) Epitaxial metallic LaNiO3 thin films grown by pulsed laser deposition. In: Applied Physics Letters, 62 (11). pp. 1233-1235.

Satyalakshmi, KM and Manoharan, Sundar S and Hegde, MS and Prasad, V and Subramanyam, SV (1995) Enhanced magnetoresistance in as?deposited oxygen?deficient La0.6Pb0.4MnO3-y thin films. In: Journal of Applied Physics, 78 (11). pp. 6861-6863.

Satyam, Suwas and Roxane, Arruffat-Massion and Toth, Laszol S and Jean-Jacques, Fundenberger and Andre, Eberhardt and Werner, Skrotzki (2006) Evolution of Crystallographic Texture during Equal Channel Angular Extrusion of Copper: The Role of Material Variables. In: Metallurgical and Materials Transactions A, 37 (3). pp. 739-753.

Sau, A and Lahiri, AK (1997) On the asymmetry of flow through a bifurcated channel. In: Acta Mechanica, 124 (1-4). pp. 79-88.

Schmidt, S and Sathiaraj, GD and Kumar, SS and Sulkowski, B and Suwas, S and Jaschinski, J and Pukenas, A and Gu, B and Skrotzki, W (2021) Effect of rolling and annealing temperature on the mechanical properties of CrMnFeCoNi high-entropy alloy. In: Materials Chemistry and Physics, 270 .

Schneider, Daniel and Tschukin, Oleg and Choudhury, Abhik and Selzer, Michael and Boehlke, Thomas and Nestler, Britta (2015) Phase-field elasticity model based on mechanical jump conditions. In: COMPUTATIONAL MECHANICS, 55 (5). pp. 887-901.

Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Overview No.144 - Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.

Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.

Schwöbel, P and Golebiowski, J and Donini, M and Archambeau, C and Pruthi, D (2023) Geographical Erasure in Language Generation. In: UNSPECIFIED, 06-12-2023 to 10-12-2023, Singapore, pp. 12310-12324.

SeethaLekshmi, Sunil and Mangalampalli, Kiran Sri Rama Narasimha and Hareesh, Unnikrishnan Nair S and Ramamurty, Upradrasta and Varughese, Sunil (2016) Structural Snapshots of Metastable Intermediates Reveals Sequential Addition of Growth Units in the Formation of an Archetypal Coordination Complex: Anisotropic Layer Migration and Solid-State Thermochromic Transitions. In: CRYSTAL GROWTH & DESIGN, 16 (12). pp. 7271-7277.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2013) Flexible poly(vinyl alcohol-co-ethylene)/modified MMT moisture barrier composite for encapsulating organic devices. In: RSC Advances, 3 (31). pp. 12831-12838.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2013) Ionomer based blend as water vapor barrier material for organic device encapsulation. In: ACS Applied Materials and Interfaces, 5 (10). pp. 4409-4416.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2014) Organic passivation layer on flexible Surlyn substrate for encapsulating organic photovoltaics. In: APPLIED PHYSICS LETTERS, 105 (10).

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2014) Performance of an ionomer blend-nanocomposite as an effective gas barrier material for organic devices. In: RSC ADVANCES, 4 (22). pp. 11176-11187.

Seethamraju, Sindhu and Ramamurthy, Praveen C and Madras, Giridhar (2015) Reactive interlayer based ultra-low moisture permeable membranes for organic photovoltaic encapsulation. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (35). pp. 23165-23172.

Seethamraju, Sindhu and Rao, Arun D and Ramamurthy, Praveen C and Madras, Giridhar (2014) Layer-by-Layer Assembly of Nafion on Surlyn with Ultrahigh Water Vapor Barrier. In: LANGMUIR, 30 (48). pp. 14606-14611.

Seetharamacharyulu, D and Pai Verneker, VR and Mallya, RM and Kumar, RN (1981) Combustion and Thermal Decomposition of Ammonium Perchlorate-Aluminium Composite Pellets: Mechanism for Aluminium Participation. In: Combustion Science And Technology, 25 (3-4). 147 -151.

Seetharamacharyulu, D and Verneker, VR Pai and Mallya, RM (1981) Combustion and Thermal Decomposition of a Binary Oxidiser System: Ammonium Perchlorate-Potassium Perchlorate. In: Combustion Science and Technology, 27 (1-2). pp. 19-30.

Seetharamacharyulu, D and Verneker, VR Pai and Mallya, RM (1982) Defect Sensitization of Combustion and Thermal Decomposition of Ammonium Perchlorate: Effect of Pelletizing Pressure and Dwell Time. In: Combustion Science and Technology, 28 (1-2). pp. 41-53.

Seetharaman, S and Abraham, KP (1969) Activity measurements in CoOMnO solid solutions. In: Scripta Metallurgica, 3 (12). pp. 911-915.

Seetharaman, S and Jacob, KT (1993) A new matched thermochemical diagram for vacuum refining of nickel and cupronickel alloys. In: Proceedings of the Paul E. Queneau International Symposium on 'Extractive Metallurgy of Copper, Nickel and Cobalt, 1993.

Seetharaman, Seshadri and Abraham, KP (1969) Activity measurements in CoO-MnO solid solutions. In: Scripta Metallurgica, 3 (12). pp. 911-915.

Seetharnraju, Sindhu and Kumar, Shishir and Bharadwaj, Krishna B and Madras, Giridhar and Raghavan, Srinivasan and Ramamurthy, Praveen Chandrashekarapura (2016) Million-Fold Decrease in Polymer Moisture Permeability by a Graphene Monolayer. In: ACS Nano, 10 (7). pp. 6501-6509.

Sekhar, JA and Rajasekharan, T and Rao, Rama P and Parthasarathy, G and Ramkumar, S and Gopal, ESR and Lakshmi, CS and Mallya, RM (1986) Electron and x-ray diffraction studies on Al86Fe14, Al82Fe18 and Al75Fe25 quasicrystals. In: Pramana, 27 (1-2). pp. 267-273.

Sekhar, K Chandra and Subramanian, S and Modak, JM and Natarajan, KA (1998) Removal of metal ions using an industrial biomass with reference to environmental control. In: International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Sekhar, Ravi K and Kishore, * and Sankaran, S (2008) Cure Behavior of Epoxy-Cyanate Ester Blend in Composite Systems: Evaluation Studies in Neat Resin Cast by Thermal and FTIR Techniques. In: Journal of Applied Polymer Science, 109 (3). pp. 2023-2028.

Selvamani, M and Kesavan, A and Arulraj, A and Ramamurthy, PC and Rahaman, M and Pandiaraj, S and Thiruvengadam, M and Sacari Sacari, EJ and Limache Sandoval, EM and Viswanathan, MR (2024) Microwave-Assisted Synthesis of Flower-like MnMoO4 Nanostructures and Their Photocatalytic Performance. In: Materials, 17 (7).

Selvi, SC and Modak, JM and Natarajan, KA (1998) Electrobioleaching of sphalerite flotation concentrate. In: Minerals Engineering, 11 (08). pp. 783-788.

Selvi, SC and Natarajan, KA (1998) Electrobioleaching - A novel concept for processing complex sulphide ores. In: Transacation of The Indian Institute of Metals, 51 (1). pp. 17-26.

Selvi, Ezhil V and Chatterji, Purba and Subramanian, S and Balaraju, JN (2014) Autocatalytic duplex Ni-P/Ni-W-P coatings on AZ31B magnesium alloy. In: SURFACE & COATINGS TECHNOLOGY, 240 . pp. 103-109.

Sen, Indrani and Ramamurty, U (2009) Effect of microstructure on the mechanical behavior of b-modified ti-6al-4v alloys. In: 138th TMS Annual Meeting and Exhibition, FEB 15-19, 2009, San Francisco, pp. 49-53.

Sen, Indrani and Ramamurty, U (2010) Elastic modulus of Ti-6Al-4V-xB alloys with B up to 0.55 wt.%. In: Scripta materialia, 62 (1). pp. 37-40.

Sen, I and Ramamurty, U (2010) Mechanical Behavior of B Modified Ti-6Al-4V Alloys. In: Physics: Conference Series, pp. 745-748.

Sen, Indrani (2010) Mechanical properties of B-modified Ti-6Al-4V alloys. In: 15th International Conference on the Strength of Materials (ICSMA 15), AUG 16-21, 2009 , Dresden, GERMANY.

Sen, Indrani and Gopinath, K and Datta, Ranjan and Ramamurty, U (2010) Fatigue in Ti-6Al-4V-B alloys. In: Acta Materialia, 58 (20). pp. 6799-6809.

Sen, Indrani and Kottada, Ravi Sankar and Ramamurty, U (2010) High temperature deformation processing maps for boron modified Ti-6Al-4V alloys. In: Materials Science and Engineering A, 527 (23). pp. 6157-6165.

Sen, Indrani and Maheshwari, L and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2009) Micromechanisms of damage in a hypereutectic Ti-6Al-4V-B alloy. In: Materials Science and Engineering: A, 518 (1-2). pp. 162-166.

Sen, Indrani and Ramamurty, Upadrasta (2010) High-Temperature (1023 K to 1273 K 750 degrees C to 1000 degrees C]) Plastic Deformation Behavior of B-Modified Ti-6Al-4V Alloys: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2959-2969.

Sen, Indrani and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2007) Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys. In: Acta Materialia, 55 (15). 4983 -4993.

Sen Gupta, R and Islam, SS and Bose, S (2024) Closed-loop circularity in water remediating membranes enabled by �exchangeable-bonds,� covalent organic framework, and sequential interpenetrating polymeric networks. In: Chemical Engineering Journal, 488 .

Sen Gupta, R and Mandal, S and Arya, S and Dutta, S and Manna, K and Safikul Islam, S and Pathan, S and Bose, S (2023) Copper-substituted polyoxometalate-soldered interpenetrating polymeric networks membranes for water remediation. In: Chemical Engineering Journal, 461 .

Sen Gupta, R and Padmavathy, N and Agarwal, P and Bose, S (2022) pH-triggered bio-inspired membranes engineered using sequential interpenetrating polymeric networks for tunable antibiotic and dye removal. In: Chemical Engineering Journal, 446 .

Sen Gupta, R and Padmavathy, N and Bose, S (2021) The Journey of Water Remediation through Biomimetic Strategies: A Mechanistic Insight. In: Advanced Sustainable Systems .

Sen Gupta, R and Samantaray, PK and Bose, S (2023) Going beyond Cellulose and Chitosan: Synthetic Biodegradable Membranes for Drinking Water, Wastewater, and Oil-Water Remediation. American Chemical Society.

Senbhagaraman, S and Guru, Row TN and Umarji, AM (1989) Corrected spacegroup for M0.5Ti2P3O12 compounds. In: Solid State Communications, 71 (7). pp. 609-611.

Sennappan, M and Srinivasa Murthy, V and Managutti, PB and Subhapriya, P and Gurushantha, K and Ramamurthy, PC and Hemavathi, B and Anantharaju, KS and Thakur, A (2024) Facile synthesis of azines by carboxylic acid esters as catalyst and facilitation of intersystem crossing (ISC) in azines by azine chromophore. In: Scientific Reports, 14 (1).

Senthil Kumar, S and Jayaram, V and Aruna, ST (2021) Enhanced power density in hydrocarbon-compatible anode-supported solid oxide fuel cell facilitated by a functional anode catalyst layer. In: Nanomaterials and Energy, 10 (2). pp. 118-127.

Senthil Kumar, SS and Jayaram, V and Aruna, ST (2020) Co-fired anode-supported solid oxide fuel cell for internal reforming of hydrocarbon fuel. In: Energy, Ecology and Environment, 6 (1). pp. 55-68.

Senthilkumar, B and Murugesan, C and Sharma, L and Lochab, S and Barpanda, P (2019) An Overview of Mixed Polyanionic Cathode Materials for Sodium-Ion Batteries. In: https://onlinelibrary.wiley.com/doi/10.1002/smtd.201800253, 3 (4).

Senthilkumar, R and Balu, Murali and Ramakrishnan, S and Ramamurthy, Praveen C and Batabyal, Sudip K and Kumaresa, Duraisamy and Kothurkar, Nikhil K (2019) Molybdenum disulfide/reduced graphene oxide hybrids with enhanced electrocatalytic activity: An efficient counter electrode for dye-sensitized solar cells. In: JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 847 .

Senthilkumar, R and Ramakrishnan, S and Balu, Murali and Ramamurthy, Praveen C and Kumaresan, Duraisamy and Kothurkar, Nikhil K (2018) One-step hydrothermal synthesis of marigold flower-like nanostructured MoS2 as a counter electrode for dye-sensitized solar cells. In: JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 22 (11). pp. 3331-3341.

Seo, Jong-Hyun and Yoon, Sang-Won and Chae, Keun-Hwa and Park, Jong-Keuk and Song, Jong-Han and Lee, Kon-Bae and Jayaram, Vickram and Seong, Tae-Yeon and Kwon, Hoon and Ahn, Jae-Pyoung (2012) Hardness and Nitrogen Bonding Structure of A(x)Ti(1-x)N/CrN Multilayer Hard Coating. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 12 (2). pp. 1581-1584.

Seok, Moo-Young and Choi, In-Chul and Moon, Joonoh and Kim, Sungju and Ramamurty, Upadrasta and Jang, Jae-il (2014) Estimation of the Hall-Petch strengthening coefficient of steels through nanoindentation. In: SCRIPTA MATERIALIA, 87 . pp. 49-52.

Seok, Moo-Young and Lee, Jung-A and Lee, Dong-Hyun and Ramamurty, Upadrasta and Nambu, Shoichi and Koseki, Toshihiko and Jang, Jae-il (2016) Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel. In: ACTA MATERIALIA, 121 . pp. 164-172.

Seok, Moo-Young and Zhao, Yakai and Lee, Jung-A and Mohamed, Reda M and Al-Harbi, Laila M and Al-Ghamdi, Mohammed S and Singh, Gaurav and Ramamurty, Upadrasta and Jang, Jae-il (2015) On the contributions of different micromechanisms for enhancement in the strength of TI-6Al-4V alloy upon B addition: A nanomechanical analysis. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 649 . pp. 123-127.

Serbesa, AT and Pal, V and Sreeram, PR and Legese, SS and Kumar, B and Adamo, CG and Mukherjee, S and Paliwal, M and Olu, FE and Tiwary, CS and Chattopadhyay, K (2023) Transport properties and microstructural evolution of Bi�Cu�Te ternary alloys. In: Journal of Materials Science, 58 (42). pp. 16462-16473.

Serrao, Claudy Rayan and Sahu, Jyoti Ranjan and Ghosh, Anirban (2010) Charge-order driven multiferroic and magneto-dielectric properties of rare earth manganates. In: Bulletin of Materials Science, 33 (2). pp. 169-178.

Serrao, Claudy Rayan and Sahu, Jyoti Ranjan and Ghosh, Anirban (2010) Charge-order driven multiferroic and magneto-dielectric properties of rare earth manganates. In: Bulletin of Materials Science, 33 (2). pp. 169-178.

Seshadri, Ram and Rao, Krishna RV and Mallya, RM and Krishnan, RV (1988) Electron-beam melting and centrifugal splat-quenching technique for rapid solidification of titanium alloys. In: Journal of Materials Science (full set), 23 (5). pp. 1637-1642.

Sethulakshmi, N and Lalitha, KV and Thomas, S and Srinivasan, G and Anantharaman, MR (2022) Ferroelectric-Ferromagnetic Heterostructures based on Sodium Substituted Lanthanum Manganite Thin films deposited on PMN-PT substrate by Pulsed Laser Deposition. In: Journal of Magnetism and Magnetic Materials, 541 .

Shabadi, R and Kumar, S and Dwarakadasa, ES and Roven, HJ (2004) Propagative plasticity in commercial aluminium alloys. In: Transactions Of The Indian Institute Of Metals, 57 (1). pp. 61-69.

Shabadi, R and Ambat, R and Dwarakadasa, ES (2014) AZ91C magnesium alloy modified by Cd. In: MATERIALS & DESIGN, 53 . pp. 445-451.

Shabadi, R and Suwas, S and Kumar, S and Roven, HJ and Dwarkadasa, ES (2012) Texture and formability studies on AA7020 Al alloy sheets. In: Materials Science and Engineering A .

Shabadi, Rajashekhar and Kumar, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Effect of specimen condition, orientation and alloy composition on PLC band parameters. In: Materials Science and Engineering: A, 382 (1-2). pp. 203-208.

Shabadi, Rajashekhar and Kumara, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Characterisation of PLC band parameters using laser speckle technique. In: Materials Science and Engineering A, 364 (1-2). pp. 140-150.

Shabadi, Rajashekhar and Roven, Hans Jørgen and Kumar, Surendra and Dwarakadasa, ES (2002) Assessing formability of sheet metals through advanced tensile and LASER speckle analysis. In: Materials Science Forum, 396-4 . pp. 1623-1628.

Shah, SR and Chokshi, AH (1997) An investigation of the sinter-forging characteristics of alumina-magnesia composites: Implications for superplasticity. In: Materials Science Forum, Superplasticity in Advanced Materials - ICSAM-97 (243). pp. 381-385.

Shah, RC (1924) Condensation of Aromatic Amines with Chloroform or Carbon Tetrachloride in the Presence of Finely Divided Copper. In: Journal of the Indian Institute of Science, 7 . pp. 205-224.

Shah, Sandeep and Chokshi, Atul H (1998) The significance of diffusional flow in ultrafine-grained materials. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 57-61.

Shah, Sandeep R and Chokshi, Atul H and Raj, Rishi (2008) Porous Al2O3-Spinel Based Polycrystals That Resist FreeSintering. In: Journal of the American Ceramic Society, 91 (10). pp. 3451-3454.

Shankar, Amitabh and Görnerup, Märten and Seetharaman, S and Lahiri, AK (2006) Sulfide capacity of high alumina blast furnace slags. In: Metallurgical and Materials Transactions B, 37 (6). pp. 941-947.

Shankar, Amitabh and Görnerup, Mårten and Lahiri, AK and Seetharaman, S (2007) Experimental Investigation of the Viscosities in $CaO-SiO_2-MgO-Al_2O_3$ and $CaO-SiO_2-MgO-Al_2O_3-TiO_2$ Slags. In: Metallurgical and Materials Transactions B, 38 (6). pp. 911-915.

Shankar, P and Palanichamy, P and Jayakumar, T and Raj, Baldev and Ranganathan, S (2001) Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in aged 316LN stainless steels. In: Metallurgical and Materials Transactions A, 32 (12). pp. 2959-2968.

Shankar, A and Gornerup, M and Lahiri, AK and Seetharaman, S (2007) Estimation of viscosity for blast furnace type slags. In: Ironmaking & Steelmaking, 34 (6). pp. 477-481.

Shankar, G and Madhavan, R and Kumar, R and Sahoo, B and Ray, RK and Suwas, S (2020) Micro-mechanism of evolution of microstructure and texture in Ni-Fe alloys. In: Materialia, 13 .

Shankar, G and Raguraman, S and Barrales Mora, LA and Suwas, S (2020) Development of Recrystallization Texture in Commercially Pure Titanium: Experiments and Simulation. In: JOM, 72 (12). pp. 4559-4573.

Shankar, G and Singh, VK and Chepuri, A and Vengatesan, B and Suwas, S (2022) Influence of Pre-strain on the Cementite Spheroidization of 22MnB5 Steel and Its Effect on Mechanical Properties. In: Journal of Materials Engineering and Performance .

Shankar, Gyan and Suwas, Satyam (2018) Effect of strain path change on the texture evolution after cold rolling and recrystallization of Nickel-40 wt. %Cobalt alloy. In: 18th International Conference on Textures of Materials (ICOTOM), NOV 06-10, 2017, St George, UT.

Shankar, P and Sundararaman, D and Ranganathan, S (1994) Cr2N precipitation stages in 316LN austenitic stainless steels. In: Scripta metallurgica et materialia, 31 (5). 589 -593 .

Shankar, U and Kumar, A and Chaurasia, SK and Kumar, P and Latif, FA and Yahya, MZA (2023) Structural, Optical, and Magnetic Properties of PMMA-Magnetite (Fe3O4) Composites: Role of Magneto-Conducting Filler Particles. In: Journal of Electronic Materials .

Shankar, U and Pandey, R and Singh, AK (2018) Incommensurately modulated phase and charge ordering transition in nanocrystalline Nd0.5Sr0.5MnO3 perovskite. In: Journal of Applied Physics, 123 (12).

Shankar, Uma and Kumar, Naveen and Narayan, Bastola and Swain, Diptikanta and Senyshyn, Anatoliy and Ranjan, Rajeev (2019) Large electromechanical response in ferroelectrics: Beyond the morphotropic phase boundary paradigm. In: PHYSICAL REVIEW B, 100 (9).

Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.

Shanmugasundaram, T and Bouzy, E and Chokshi, AH (2015) Strengthening and weakening by repeated dynamic impact in microcrystals and nanocrystals. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 639 . pp. 97-102.

Sharma, A and Dixit, S and Baler, N and Agrawal, P and Makineni, SK and Chattopadhyay, K (2022) Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy. In: Materials Science and Engineering A, 855 .

Sharma, A and Mohan, S and Suwas, S (2019) Evidence of adaptive modulation and magnetic field induced reorientation of variants in epitaxially grown Ni-Mn-Ga thin film on Al 2 O 3 (112¯0) substrate. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 242 . pp. 6-16.

Sharma, A and Mohan, S and Suwas, S (2019) Evidence of adaptive modulation and magnetic field induced reorientation of variants in epitaxially grown Ni-Mn-Ga thin film on Al 2 O 3 (112¯0) substrate. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 242 . pp. 6-16.

Sharma, A and Mondal, C and Makineni, SK and Chattopadhyay, K and Banerjee, D (2022) Exploring the correlation between microscopic mechanisms and macroscopic behaviour in creep of a directionally solidified tungsten-free γ/γ� CoNi-base superalloy. In: Acta Materialia, 228 .

Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .

Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .

Sharma, A and Tripathi, A and Nandam, SH and Hahn, H and Eswar Prasad, K (2023) Role of indenter geometry on the deformation behavior in a Pd-Si based metallic and nanoglass. In: Journal of Alloys and Compounds, 933 .

Sharma, Amit and Chhangani, Sumit and Madhavan, R and Suwas, Satyam (2017) Correlation between crystallographic texture, microstructure and magnetic properties of pulse electrodeposited nanocrystalline Nickel-Cobalt alloys. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 434 . pp. 68-77.

Sharma, Amit and Mohan, S and Suwas, Satyam (2016) Development of bi-axial preferred orientation in epitaxial NiMnGa thin films and its consequence on magnetic properties. In: ACTA MATERIALIA, 113 . pp. 259-271.

Sharma, Amit and Mohan, S and Suwas, Satyam (2019) Evidence of adaptive modulation and magnetic field induced reorientation i of variants in epitaxially grown Ni-Mn-Ga thin film on Al2O3 (11(2)over-bar0) substrate. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 242 . pp. 6-16.

Sharma, Amit and Mohan, S and Suwas, Satyam (2016) Structural, microstructural and magnetic investigations on the epitaxially grown Ni2MnGa(010) films on MgO(100) substrate. In: INTERMETALLICS, 77 . pp. 6-13.

Sharma, Amit and Mohan, S and Suwas, Satyam (2016) The effect of the deposition rate on the crystallographic texture, microstructure evolution and magnetic properties in sputter deposited Ni-Mn-Ga thin films. In: THIN SOLID FILMS, 616 . pp. 530-542.

Sharma, Amit and Mohan, S and Suwas, Satyam (2016) The influence of deposition temperature on the structure, microstructure, morphology and magnetic properties of sputter deposited nickel thin films. In: THIN SOLID FILMS, 619 . pp. 91-101.

Sharma, Amit and Mohan, Sangeneni and Suwas, Satyam (2018) New insights into microstructural evolution of epitaxial Ni-Mn-Ga films on MgO (100) substrate by high-resolution X-ray diffraction and orientation imaging investigations. In: PHILOSOPHICAL MAGAZINE, 98 (10, A). pp. 819-847.

Sharma, Amit and Mohan, Sangeneni and Suwas, Satyam (2016) Structural transformations in highly oriented seven modulated martensite Ni-Mn-Ga thin films on an Al2O3 (11(2)over-bar0) substrate. In: JOURNAL OF MATERIALS RESEARCH, 31 (19). pp. 3016-3026.

Sharma, B and Singh, S and Pandey, A and Dutt, D and Kulshreshtha, A (2022) Environment-friendly and cost-effective solution for flexible packaging printing process by advancement in engraving process. In: Clean Technologies and Environmental Policy .

Sharma, Bhupendra K and Stoesser, Anna and Monda, Sandeep Kumar and Garlapati, Suresh Kumar and Fawey, Mohammed H and Chakravadhanula, Venkata Sai Kiran and Kruk, Robert and Hahn, Horst and Dasgupta, Subho (2018) High-Performance All-Printed Amorphous Oxide FETs and Logics with Electronically Compatible Electrode/Channel Interface. In: ACS APPLIED MATERIALS & INTERFACES, 10 (26). pp. 22408-22418.

Sharma, D and Bose, S (2021) The journey of PDMS-based nanocomposites for EMI shielding applications: From bench to translational research. In: Materials Advances, 2 (17). pp. 5580-5592.

Sharma, D and Dutta, I and Kumar, P (2020) A technique for machining thin metallic foils using electromagnetic mechanical pulsed loading. In: Engineering Research Express, 2 (1).

Sharma, D and Kalyan, D and Makineni, SK and Santra, S (2023) Effect of Zr on growth kinetics, microstructure and microtexture of Nb3Sn by bronze technique. In: Journal of Alloys and Compounds, 935 .

Sharma, D and Kumar, P (2019) Failure of thin metallic conductors under electric current loading: Transition from sharp crack to blow-hole. In: Engineering Fracture Mechanics, 208 . pp. 221-237.

Sharma, D and Kumar, P (2017) Synergistic effect of electromagnetic force on fracture behavior of pre-cracked thin metallic structures. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 407-408.

Sharma, D and Menon, AV and Bose, S (2020) Graphene templated growth of copper sulphide 'flowers' can suppress electromagnetic interference. In: Nanoscale Advances, 2 (8). pp. 3292-3303.

Sharma, D and Punetha, P and Das Adhikary, G and Avdeev, M and Ranjan, R (2024) Interplay of local polarization, ionic size, and octahedral tilt in SrTiO3-Na0.5Bi0.5Ti O3. In: Physical Review B, 109 (1).

Sharma, Deepak and Jain, Aman and Somaiah, Nalla and Narayanan, P Ramesh and Kumar, Praveen (2018) Effect of Embedding Cu-Graphene Hybrid Powder into 2-Phase In-Cu Solders on Its Suitability as Metallic Thermal Interface Material. In: JOURNAL OF ELECTRONIC MATERIALS, 47 (8). pp. 4863-4874.

Sharma, Deepak and Reddy, B Subba and Kumar, Praveen (2018) Fracture of pre-cracked metallic conductors under combined electric current and mechanical loading. In: INTERNATIONAL JOURNAL OF FRACTURE, 212 (2). pp. 167-182.

Sharma, Deepak and Reddy, B Subba and Kumar, Praveen (2018) Fracture of pre-cracked thin metallic conductors due to electric current induced electromagnetic force. In: INTERNATIONAL JOURNAL OF FRACTURE, 212 (2). pp. 183-204.

Sharma, Deepak and Tiwari, Rajesh Kumar and Sharma, Rohan and Narayanan, Ramesh P and Kumar, Praveen (2016) Two-Phase Metallic Thermal Interface Materials Processed Through Liquid Phase Sintering Followed by Accumulative Roll Bonding. In: IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 6 (1). pp. 58-66.

Sharma, Garima and Sarkar, Apu and Varshney, Jalaj and Ramamurty, U and Kumar, Ajay and Gupta, SK and Chakravartty, JK (2011) Effect of irradiation on the microstructure and mechanical behavior of nanocrystalline nickel. In: Scripta Materialia, 65 (8). pp. 727-730.

Sharma, K and Kesharwani, P and Jain, A and Mody, N and Sharma, G and Sharma, S and Hussain, CM (2024) Challenges and Preventive Interventions in COVID-19 Transmission through Domestic Chemistry Hygiene: A Critical Assessment. [Book Chapter]

Sharma, K and Kesharwani, P and Prajapati, SK and Jain, A and Jain, D and Mody, N and Sharma, S (2022) An Insight into Anticancer Bioactives from Punica granatum (Pomegranate). In: Anti-Cancer Agents in Medicinal Chemistry, 22 (4). pp. 694-702.

Sharma, K and Kesharwani, P and Prajapati, SK and Jain, A and Mittal, N and Kaushik, R and Mody, N (2022) Smart Devices in Healthcare Sector: Applications. [Book Chapter]

Sharma, Keshav and Sharma, Maya and Chandra, Aman and Bose, Suryasarathi (2013) Concentration Fluctuations and Segmental Dynamics in Weakly Dynamic Asymmetric Blends in the Presence of Surface-Functionalized Multiwall Carbon Nanotubes. In: MACROMOLECULAR CHEMISTRY AND PHYSICS, 214 (23). pp. 2651-2669.

Sharma, L and Lochab, S and Senthilkumar, B and Barpanda, P (2019) Electrocatalytic activity of co-redox center in phosphate-based oxyanionic sodium battery materials. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.

Sharma, M and Kumar, P and Irzhak, AV and Kumar, S and Pratap, R and von Gratovski, SV and Shavrov, VG and Koledov, VV (2020) Melting and Electromigration in Thin Chromium Films. In: Physics of the Solid State, 62 (6). pp. 988-992.

Sharma, M and Kumar, S and Pratap, R and Irzhak, A and Kumar, P and Von Gratowski, S and Koledov, V and Lega, P and Shavrov, V (2020) Electric current driven formation of micro-and nano-sized beads in thin Cr films. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8 August 2019, Zhenjiang; China, pp. 86-89.

Sharma, M and Ramakrishnan, S and Remanan, S and Madras, G and Bose, S (2018) Nano tin ferrous oxide decorated graphene oxide sheets for efficient arsenic (III) removal. In: Nano-Structures and Nano-Objects, 13 . pp. 82-92.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Anomalous structural relaxations in PVDF rich blends with PMMA in the presence of surface functionalized CNTs. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (42). pp. 23421-23430.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2015) Contrasting Effects of Graphene Oxide and Poly(ethylenimine) on the Polymorphism in Poly(vinylidene fluoride). In: CRYSTAL GROWTH & DESIGN, 15 (7). pp. 3345-3355.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Cooperativity and Structural Relaxations in PVDF/PMMA Blends in the Presence of MWNTs: An Assessment through SAXS and Dielectric Spectroscopy. In: MACROMOLECULES, 47 (4). pp. 1392-1402.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2016) Critical insights into the effect of shear on in situ reduction of graphene oxide in PVDF: assessing by rheo-dielectric measurements. In: MATERIALS RESEARCH EXPRESS, 3 (6).

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2016) PVDF membranes containing hybrid nanoparticles for adsorbing cationic dyes: physical insights and mechanism. In: MATERIALS RESEARCH EXPRESS, 3 (7).

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Process induced electroactive beta-polymorph in PVDF: effect on dielectric and ferroelectric properties. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (28). pp. 14792-14799.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Shear induced crystallization in different polymorphic forms of PVDF induced by surface functionalized MWNTs in PVDF/PMMA blends. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (31). pp. 16492-16501.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2014) Size dependent structural relaxations and dielectric properties induced by surface functionalized MWNTs in poly(vinylidene fluoride)/poly(methyl methacrylate) blends. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (6). pp. 2693-2704.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2015) Unique nanoporous antibacterial membranes derived through crystallization induced phase separation in PVDF/PMMA blends. In: JOURNAL OF MATERIALS CHEMISTRY A, 3 (11). pp. 5991-6003.

Sharma, Maya and Madras, Giridhar and Bose, Suryasarathi (2015) Unusual Fragility and Cooperativity in Glass-Forming and Crystalline PVDF/PMMA Blends in the Presence of Multiwall Carbon Nanotubes. In: MACROMOLECULES, 48 (8). pp. 2740-2750.

Sharma, Maya and Padmavathy, Nagarajan and Remanan, Sanjay and Madras, Giridhar and Bose, Suryasarathi (2016) Facile one-pot scalable strategy to engineer biocidal silver nanocluster assembly on thiolated PVDF membranes for water purification. In: RSC ADVANCES, 6 (45). pp. 38972-38983.

Sharma, Maya and Remanan, Sanjay and Madras, Giridhar and Bose, Suryasarathi (2017) Crystallization Induced Phase Separation: Unique Tool to Design Microfiltration Membranes with High Flux and Sustainable Antibacterial Surface. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 56 (8). pp. 2025-2035.

Sharma, Maya and Sharma, Keshav and Bose, Suryasarathi (2013) Segmental relaxations and crystallization-induced phase separation in PVDF/PMMA blends in the presence of surface-functionalized multiwall carbon nanotubes. In: Journal of Physical Chemistry B, 117 (28). pp. 8589-8602.

Sharma, Maya and Singh, Deepinder and Menon, Aishwarya and Madras, Giridhar and Bose, Suryasarathi (2018) Suppressing Electromagnetic Radiation by Trapping Ferrite Nanoparticles and Carbon Nanotubes in Hierarchical Nanoporous Structures Designed by Crystallization-Induced Phase Separation. In: CHEMISTRYSELECT, 3 (4). pp. 1189-1201.

Sharma, Maya and Singh, Mahander Pratap and Srivastava, Chandan and Madras, Giridhar and Bose, Suryasarathi (2015) Poly(vinylidene fluoride)-Based Flexible and Lightweight Materials for Attenuating Microwave Radiations. In: ACS APPLIED MATERIALS & INTERFACES, 6 (23). pp. 21151-21160.

Sharma, Maya and Srinivas, Vijay and Madras, Giridhar and Bose, Suryasarathi (2016) Outstanding dielectric constant and piezoelectric coefficient in electrospun nanofiber mats of PVDF containing silver decorated multiwall carbon nanotubes: assessing through piezoresponse force microscopy. In: RSC ADVANCES, 6 (8). pp. 6251-6258.

Sharma, N and Pareek, S and Shrivastava, R and Behera, D (2023) Functionalized Carbon Nanotubes: Synthesis and Characterization. [Book Chapter]

Sharma, Prithu and Biswas, Krishanu and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2009) Size effect on the lattice parameter of KCl during mechanical milling. In: Scripta Materialia, 61 (6). pp. 600-603.

Sharma, S and Bhaskar, N and Bose, S and Basu, B (2018) Biomimetic porous high-density polyethylene/polyethylene-grafted-maleic anhydride scaffold with improved in vitro cytocompatibility. In: Journal of Biomaterials Applications, 32 (10). pp. 1450-1463.

Sharma, S and Gupta, A (2010) Pt2+ Dispersed in Ce0.83Ti0.15O2-delta: Significant Improvement in PROX Activity by Ti Substitution in CeO2 in Hydrogen Rich Stream. In: Catalysis Letters, 134 (3-4). pp. 330-336.

Sharma, S and Sharma, A and Kumar, S (2012) Semi solid forming of A356 Al alloy by rapid slurry forming process. In: ICAA13: 13th International Conference on Aluminum Alloys, 4 SEP 2012, Pittsburgh.

Sharma, Subhash and Singh, Vikash and Dwivedi, RK and Ranjan, Rajeev and Anshul, Avneesh and Amritphale, SS and Chandra, Navin (2014) Phase transformation, improved ferroelectric and magnetic properties of (1-x) BiFeO3-xPb(Zr0.52Ti0.48)O-3 solid solutions. In: JOURNAL OF APPLIED PHYSICS, 115 (22).

Sharma, Subhash and Singh, Vikash and Kotnala, RK and Ranjan, Rajeev and Dwivedi, RK (2014) Co-existence of tetragonal and monoclinic phases and multiferroic properties for x <= 0.30 in the (1-x)Pb(Zr0.52Ti0.48)O-3-(x)BiFeO3 system. In: JOURNAL OF ALLOYS AND COMPOUNDS, 614 . pp. 165-172.

Sharma, V and Bose, S and Kundu, B and Bodhak, S and Mitun, D and Balla, VK and Basu, B (2020) Probing the Influence of ?-Sterilization on the Oxidation, Crystallization, Sliding Wear Resistance, and Cytocompatibility of Chemically Modified Graphene-Oxide-Reinforced HDPE/UHMWPE Nanocomposites and Wear Debris. In: ACS Biomaterials Science and Engineering, 6 (3). pp. 1462-1475.

Sharma, V and Chowdhury, S and Bose, S and Basu, B (2021) Polydopamine Codoped BaTiO3-Functionalized Polyvinylidene Fluoride Coating as a Piezo-Biomaterial Platform for an Enhanced Cellular Response and Bioactivity. In: ACS Biomaterials Science and Engineering .

Shashanka, HM and Saha, S and Haritha, K and Anantharamaiah, PN and Ramana, CV (2023) Aluminum and Zinc Co-substituted Cobalt Ferrite: Structural, Magnetic, and Magnetostrictive Properties. In: Journal of Physical Chemistry C .

Shashanka, HM and Singh, DN and Chelvane, JA and Anantharamaiah, PN (2024) Gallium induced effect on magnetic, magnetostrictive and electrical properties of sintered NiFe2O4. In: Inorganic Chemistry Communications, 161 (161).

Shashanka, HM and Vaishali, RV and Saha, S and Anantharamaiah, PN (2024) Tartrate-gel synthesized BaFe12-xCuxO19 (0 � x � 1) nanoceramics: Magnetic and catalytic properties. In: Materials Chemistry and Physics, 314 .

Shashikala, AR and Raichur, AM (2002) Role of interfacial phenomena in determining adsorption of Bacillus polymyxa onto hematite and quartz. In: Colloids and Surfaces B: Biointerfaces, 24 (1). pp. 11-20.

Shastri, V and Majumder, S and Ashok, A and Roy, K and Pratap, R and Kumar, P (2023) Electric current-assisted manipulation of liquid metals using a stylus at micro-and nano-scales. In: Nanotechnology, 34 (10).

Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Manipulating liquid metal flow for creating standalone structures with micro-and nano-scale features in a single step. In: Nanotechnology, 33 (45).

Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Spontaneous Formation of Structures with Micro- and Nano-Scopic Periodic Ripple Patterns. In: ACS Omega, 7 (14). pp. 12111-12119.

Shastry, VV and Divya, VD and Azeem, MA and Paul, A and Dye, D and Ramamurty, U (2013) Combining indentation and diffusion couple techniques for combinatorial discovery of high temperature shape memory alloys. In: Acta Materialia, 61 (15). pp. 5735-5742.

Shastry, VV and Ramamurty, U (2013) Simultaneous measurement of mechanical and electrical contact resistances during nanoindentation of NiTi shape memory alloys. In: ACTA MATERIALIA, 61 (14). pp. 5119-5129.

Shastry, Vyasa V (2013) Temperature dependence of indentation recovery ratios in austenitic and martensitic shape memory alloys. In: Smart Materials and Structures, 22 (7). 077002_1-077002_5.

Shastry, Vyasa V and Maji, Bikas and Krishnan, Madangopal and Ramamurty, Upadrasta (2011) High-temperature deformation processing maps for a NiTiCu shape memory alloy. In: Journal of Materials Research, 26 (19). pp. 2484-2492.

Shastry, Vyasa V and Ramamurty, Upadrasta and Misra, Abha (2012) Thermo-mechanical stability of a cellular assembly of carbon nanotubes in air. In: CARBON, 50 (12). pp. 4373-4378.

Shehata, N and Singh, S and Ramamurthy, PC and Dhanjal, DS and Kaul, N and Romero, R and Singh, J (2023) Removal of pesticides from wastewater by Fenton systems: Enhanced degradation by chelating agents and solar irradiation. [Book Chapter]

Shekar, S and Subramanian, S and Ramamurthy, PC (2022) Design and fabrication of a solid-state chemiresistive sensor for the detection of hexavalent chromium. In: 2022 IEEE International Conference on Flexible and Printable Sensors and Systems, FLEPS 2022, 10 - 13 July 2022, Vienna.

Shen, YL and Ramamurty, U (2001) Constitutive Response of Passivated Copper Films: Experiments and Analyses. In: MRS Proceedings, 695 .

Shen, YL and Ramamurty, U (2003) Constitutive response of passivated copper films to thermal cycling. In: Journal of Applied Physics, 93 (3). pp. 1806-1812.

Shen, YL and Ramamurty, U (2003) Temperature-dependent inelastic response of passivated copper films: Experiments, analyses, and implications. In: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21 (4). pp. 1258-1264.

Sheshadri, R and Nagaraj, M and Lakshmikanthan, A and Chandrashekarappa, MPG and Pimenov, DY and Giasin, K and Prasad, RVS and Wojciechowski, S (2021) Experimental investigation of selective laser melting parameters for higher surface quality and microhardness properties: taguchi and super ranking concept approaches. In: Journal of Materials Research and Technology, 14 . pp. 2586-2600.

Shet, Tukaram and Bhimireddi, Rajasekhar and Varma, Kalidindi B R (2019) Enhanced piezoelectric properties of Sr-(1.7)(Na0.5Bi0.5)(0.3)Bi4Ti5O18 ceramics in the system Sr(2-x)(Na0.5Bi0.5)(x)Bi4Ti5O18 (where 0 x 0.5). In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 102 (7). pp. 4082-4091.

Shete, Mayuresh K and Dutta, Tanmay and Singh, I and Narasimhan, R and Ramamurty, U (2017) Tensile stress-strain response of metallic glass matrix composites reinforced with crystalline dendrites: Role of dendrite morphology. In: INTERMETALLICS, 83 . pp. 70-82.

Shete, Mayuresh K and Singh, I and Narasimhan, R and Ramamurty, U (2016) Effect of strain hardening and volume fraction of crystalline phase on strength and ductility of bulk metallic glass composites. In: SCRIPTA MATERIALIA, 124 . pp. 51-55.

Shetty, Kishora and Kumar, S and Rao, Raghothama P (2009) Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade). In: Surface and Coatings Technology, 203 (10-11). pp. 1530-1536.

Shi, R and Choudhuri, D and Kashiwar, A and Dasari, S and Wang, Y and Banerjee, R and Banerjee, D (2021) α phase growth and branching in titanium alloys. In: Philosophical Magazine, 102 (5). 389 -412.

Shibata, Hiroyuki and Ohta, Hiromichi and Nemoto, Takashi and Nagayama, Shun and Waseda, Yoshio and Fujii, Katsushi and Jacob, Thomas K (2010) Measurement for Thermal Effusivity of AlxGa1-xN Alloys Using Thermoreflectance with Periodic Heating. In: High Temperature Materials and Processes, 29 (5-6, S). pp. 515-522.

Shim, WW and Jacob, KT (1982) Gibbs energy formation of lead titanate. In: Canadian Metallurgical Quarterly, 21 (2). pp. 171-177.

Shim, WW and Jacob, KT (1982) Potentiometric determination of the Gibbs energies of formation of lead aluminates. In: Journal of the Electrochemical Society, 129 (5). pp. 1116-1121.

Shinoda, K and Reynales, C and Waseda, Y and Jacob, KT and Sugiyama, K (1995) An improved X-ray structural analysis for determining cation distribution in ZnFe2O4 and ZnFe2O4- Fe3O4 solid solutions. In: Journal of the Mining and Materials Processing Institute of Japan, 111 . pp. 801-806.

Shiva, Konda and Kiran, MSRN and Ramamurty, U and Asokan, S and Bhattacharyya, Aninda J (2012) A broad pore size distribution mesoporous SnO2 as anode for lithium-ion batteries. In: JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 16 (11, SI). pp. 3643-3649.

Shivakumar, N and Vasu, V and Narasaiah, N and Kumar, Subodh (2015) Synthesis and Characterization of nano-sized Al2O3 particle reinforced ZA-27 metal matrix composites. In: 2nd international Conference on Nanomaterials and Technologies, OCT 17-18, 2014, Mumbai, INDIA, pp. 159-167.

Shivamurthy, RC and Surappa, MK (2011) Tribological characteristics of A356 Al alloy-SiC(P) composite discs. In: Wear, 271 (9-10, ). pp. 1946-1950.

Shubha, HN and Venkatesha, TV and Pavithra, MK and Kumar, Punith MK (2016) Surface modification of mild steel by a self-assembled cetyl-trimethyl ammonium bromide (CTAB) monolayer: Evaluation of its corrosion protection property. In: PROGRESS IN ORGANIC COATINGS, 90 . pp. 267-276.

Shubha, HN and Venkatesha, TV and Vathsala, K and Pavitra, MK and Kumar, MK Punith (2013) Preparation of Self Assembled Sodium Oleate Monolayer on Mild Steel and Its Corrosion Inhibition Behavior in Saline water. In: ACS APPLIED MATERIALS & INTERFACES, 5 (21). pp. 10738-10744.

Shukla, A and Asli, KH and Rawat, NK and Abraham, AR and Haghi, AK (2024) Technological advancement in clean energy production: Constraints and solutions for energy and electricity development. Apple Academic Press, pp. 1-304. ISBN 978-100383709-1 ; 978-177491558-5

Shukla, A and Sharma, A and Nayak, V and Verma, R and Singh, J (2022) Synthesis, characterization, and application of chitosan nanomaterials loaded with other metals/elements in plant. [Book Chapter]

Shukla, SS and Nasker, P and Dieringa, H and Kumar, S and Mondal, AK (2024) Microstructural characterization and creep behavior of dispersion strengthened MRI230D magnesium alloy. In: Materials Science and Engineering: A, 916 .

Shwetha, HJ and Shilpa, S and Mukherjee, MB and Ambedkar, R and Raichur, AM and Lakshminarayana, R (2020) Fabrication of chitosan nanoparticles with phosphatidylcholine for improved sustain release, basolateral secretion, and transport of lutein in Caco-2 cells. In: International Journal of Biological Macromolecules, 163 . pp. 2224-2235.

Siddaramanna, Ashoka and Kothai, V and Srivastava, Chandan and Ranjan, Rajeev (2014) Stabilization of metastable tetragonal phase in a rhombohedral magnetoelectric multiferroic BiFeO3-PbTiO3. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 47 (4).

Siddaramanna, Ashoka and Srivastava, Chandan and Rao, Badari Narayana and Ranjan, Rajeev (2013) Effect of crystallite size and clustering in influencing the stability of phases of a very large tetragonality ferroelectric system 0.6BiFeO(3)-0.4PbTiO(3). In: Solid State Communications, 160 . pp. 56-60.

Sikdar, K and Mahata, A and Roy, B and Roy, D (2023) Thermokinetic stabilisation of nanocrystalline Cu by ternary approach. In: Philosophical Magazine, 103 (1). pp. 27-42.

Sikdar, K and Roy, B and Mahata, A and Roy, D (2022) Enhanced thermal stability of nanocrystalline Cu-Al alloy by nanotwin and nanoprecipitate. In: Journal of Alloys and Compounds, 922 .

Sil, Anomitra and Naik, Mit H and Ranjan, Rajeev and Kumar, P S Anil (2018) Tuning the crystallographic orientation and magnetic properties of multiferroic CuO epitaxial film on single crystalline SrTiO3 substrates. In: JOURNAL OF APPLIED PHYSICS, 124 (8).

Sil, Anomitra and Negi, Devendra S and Naik, Mit H and Jain, Manish and Datta, Ranjan and Ranjan, Rajeev and Kumar, P S Anil (2019) Large intrinsic magnetization in an epitaxial BiFeO3/NdGaO3 system. In: EPL, 126 (5).

Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.

Singh, Alok and Ranganathan, S (1996) Indexing of decagonal quasicrystals II. A comparison of zone-axis pattern maps of decagonal phases of different periodicities. In: Philosophical Magazine A, 74 (4). pp. 841-859.

Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.

Singh, V and Gupta, GS (2008) Behavior of Granular Material in Packed Bed Under Influence of Gas Injected Through a Nozzle. In: Particulate Science & Technology, 26 (3). pp. 214-221.

Singh, A and Nath, B and Panchal, A and Ramamurthy, PC (2022) Performance enhancement by introducing different chlorinated salts in the SnO2 electron transfer layer of perovskite solar cells. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore.

Singh, A and Ranganathan, S and Bendersky, LA (1997) Quasicrystalline phases and their approximants in Al-Mn-Zn alloys. In: Acta Materialia, 45 (12). pp. 5327-5336.

Singh, A and Singh, DN and Singh, RP and Ranjan, R and Ramamurthy, PC (2022) Photo-response and memory effect resemblance of Piezoceramics adapted in photovoltaic architecture. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore.

Singh, A and Srivastava, AK and Ranganathan, S (1993) Electron-Microscopy of Multiple Twins. In: Symposium on Microstructure of Materials, OCT 22-23, 1992 , BERKELEY, CA.

Singh, A V (2016) Pectin-Chitosan conjugates novel biomaterial as platform for colon cancer drug delivery. In: ANNALS OF ONCOLOGY, 27 (9).

Singh, AP and Srivastava, C (2023) Effect of selective atomic clustering, surface texture and grain boundary constitution on the corrosion behaviour of electrodeposited Sn-xBi coatings. In: Corrosion Science, 215 .

Singh, AP and Srivastava, C (2024) Role of solute clustering and grain orientation on electrochemical degradation of Sn-Bi coatings electrodeposited at different current densities. In: Electrochimica Acta, 477 .

Singh, AP and Srivastava, C (2023) Understanding the non-monotonic variation in the corrosion rate of Sn-Ni coatings with Ni addition by the analysis of texture and grain boundary constitution of the matrix phase and spatial distribution of the intermetallic phase in the coating microstructure. In: Corrosion Science, 211 .

Singh, AV (2019) Evaluation of magnetic nanoparticle of irinotecan for personalized treatment of colorectal cancer. In: ANNALS OF ONCOLOGY, 30 (1).

Singh, AV (2015) Synthesis of folic acid-chitosan bioconjugate system for cancer cell targeting: reaction parameter optimization and characterization. In: ANNALS OF ONCOLOGY, 26 (9). p. 154.

Singh, Akhilesh Vikram and Nath, Lila Kanta (2013) Evaluation of microwave assisted grafted sago starch as controlled release polymeric carrier. In: INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 60 . pp. 62-68.

Singh, Akhilesh Vikram and Nath, Lila Kanta (2013) Formulation development and evaluation of lamivudine controlled release tablets using cross-linked sago starch. In: EXPERT OPINION ON DRUG DELIVERY, 10 (2). pp. 173-182.

Singh, Alok and Ranganathan, S (1996) Indexing of decagonal quasicrystals .1. The T-8-phase. In: Philosophical Magazine A & B, 74 (4). pp. 821-840.

Singh, Alok and Ranganathan, S (1991) On the Variety of Electron Diffraction Patterns from a Face-Centred Icosahedral Quasicrystal. In: Scripta Metallurgica et Materialia, 25 (2). pp. 409-412.

Singh, Alok and Ranganathan, S (1999) On the indexing and reciprocal space of icosahedral quasicrystal. In: Journal of Materials Research, 14 (11). pp. 4182-4187.

Singh, Alok and Ranganathan, S (1997) Ordering and twinning in quasicrystals. In: Progress in Materials Science, 42 (1-4). pp. 393-407.

Singh, Alok and Ranganathan, S (1993) Quasicrystalline and crystalline phases and their twins in rapidly solidified Al-Mn-Fe alloys. In: Fourth International Conference on Quasicrystals, 31 May-5 June 1992, St. Louis, MO, USA, pp. 86-91.

Singh, Alok and Ranganathan, S (1995) Solid-state transformations involving quasicrystals. In: Materials Science and Engineering B, 32 (3). pp. 137-144.

Singh, Alok and Ranganathan, S (1995) A transmission electron microscopic study of icosahedral twins- I. Rapidly solidified Al-Mn-Fe alloys. In: Acta Metallurgica et Materialia, 43 (9). pp. 3539-3551.

Singh, Alok and Ranganathan, S (1995) A transmission electron microscopic study of icosahedral twins- II. A rapidly solidified Al-Cu-Fe alloy. In: Acta Metallurgica et Materialia, 43 (9). pp. 3553-3562.

Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.

Singh, B and Saykar, NG and Kumar, BS and Afria, D and Sangeetha, CK and Rondiya, SR (2024) Unraveling Interface-Driven and Loss Mechanism-Centric Phenomena in 3D/2D Halide Perovskites: Prospects for Optoelectronic Applications. In: ACS Omega, 9 (9). pp. 10000-10016.

Singh, B and Wang, Z and Park, S and Gautam, GS and Chotard, JN and Croguennec, L and Carlier, D and Cheetham, AK and Masquelier, C and Canepa, P (2021) A chemical map of NaSICON electrode materials for sodium-ion batteries. In: Journal of Materials Chemistry A, 9 (1). pp. 281-292.

Singh, Gaurav and Bajargan, Govind and Datta, Ranjan and Ramamurty, Upadrasta (2014) Deformation and strength of Ti-6Al-4V alloyed with B at cryogenic temperatures. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 611 . pp. 45-57.

Singh, Gaurav and Bajargan, Govind and Datta, Ranjan and Ramamurty, Upadrasta (2013) Effect of hydrogen charging on tensile properties of B-modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 576 . pp. 326-336.

Singh, Gaurav and Gaddam, Raghuveer and Petley, Vijay and Datta, Ranjan and Pederson, Robert and Ramamurty, Upadrasta (2013) Strain-controlled fatigue in B-modified Ti-6Al-4V alloys. In: SCRIPTA MATERIALIA, 69 (9). pp. 698-701.

Singh, Gaurav and Hong, Sung-Min and Oh-ishi, Keiichiro and Hono, Kazuhiro and Fleury, Eric and Ramamurty, Upadrasta (2014) Enhancing the high temperature plasticity of a Cu-containing austenitic stainless steel through grain boundary strengthening. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 602 . pp. 77-88.

Singh, Gaurav and Narayan, RL and Asiri, AM and Ramamurty, U (2016) Discrete drops in the electrical contact resistance during nanoindentation of a bulk metallic glass. In: APPLIED PHYSICS LETTERS, 108 (18).

Singh, Gaurav and Satyanarayana, DVV and Pederson, Robert and Datta, Ranjan and Ramamurty, Upadrasta (2014) Enhancement in creep resistance of Ti-6Al-4V alloy due to boron addition. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 597 . pp. 194-203.

Singh, Gaurav and Sen, Indrani and Gopinath, K and Ramamurty, U (2012) Influence of minor addition of boron on tensile and fatigue properties of wrought Ti-6Al-4V alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 540 . pp. 142-151.

Singh, I and Narasimhan, R and Ramamurty, Upadrasta (2016) Cavitation-Induced Fracture Causes Nanocorrugations in Brittle Metallic Glasses. In: PHYSICAL REVIEW LETTERS, 117 (4).

Singh, J and Pandey, A and Singh, S and Garg, VK and Ramamurthy, P Singh, J and Ramamurthy, P, eds (2023) Current Developments in Biotechnology and Bioengineering: Pesticides: Human Health, Environmental Impacts and Management. Elsevier, pp. 1-510. ISBN 978-032391900-5, 978-032391645-5

Singh, J and Wayman, Cm and Mazumder, J and Lele, S and Ranganathan, S (1988) Spinodal decomposition of a Co-Ti-Nb alloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 19 (7). pp. 1703-1709.

Singh, Jayram and Gupta, Preeti and Das, SS and Singh, NB (2014) Phase Diagram Study of Succinonitrile-Vanillin Organic Alloy System. In: MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 605 (1). pp. 240-258.

Singh, K and Kumar, A and Pandey, SK and Awasthi, S and Gupta, SP and Mishra, P (2020) Interpretation of adsorption behavior of carboxymethyl cellulose onto functionalized accurel polymeric surface. In: Industrial and Engineering Chemistry Research . (In Press)

Singh, K and Kumar, A and Pandey, SK and Awasthi, S and Gupta, SP and Mishra, P (2020) Interpretation of adsorption behavior of carboxymethyl cellulose onto functionalized accurel polymeric surface. In: Industrial and Engineering Chemistry Research, 59 (43). pp. 19102-19116.

Singh, M and Pradhan, JR and Dasgupta, S (2022) Inkjet-printed a-IGZO/Ag Schottky diodes with> 10⁶ rectification ratio. In: 2022 IEEE International Conference on Emerging Electronics (ICEE), 11-14 December 2022, Bangalore, India.

Singh, MP and Basu, B and Chattopadhyay, K (2022) Probing High-Temperature Electrochemical Corrosion of 316 Stainless Steel in Molten Nitrate Salt for Concentrated Solar Power Plants. In: Journal of Materials Engineering and Performance, 31 (6). 4902 -4908.

Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Achieving lower mass density with high strength in Nb stabilised γ/γ′ Co–Al–Mo–Nb base superalloy by the replacement of Mo with V. In: Materials Science and Engineering A, 794 .

Singh, MP and Mohan Das, S and Gosain, OP and Chattopadhyay, K (2022) On the role of Ti aiding the protective barrier layer formation for γ�(L12)-strengthened Co-30Ni-10Al-5Cr-2Ta-2/4Ti superalloys. In: Corrosion Science, 194 .

Singh, MP and Olu, EF and Pandey, P and Chattopadhyay, K (2021) Thermophysical and magnetic properties of Co-Ni-Mo-Al-Ta class of tungsten free Co-based superalloys. In: Journal of Alloys and Compounds, 879 .

Singh, Mahander Pratap and Raghupathy, Y and Natarajan, KA and Srivastava, Chandan (2015) Synthesis, electron microscopy and anti-microbial properties of Fe3O4-Ag nanotubes. In: RSC ADVANCES, 5 (48). pp. 38164-38169.

Singh, Mahander Pratap and Rai, Rajesh Kumar and Srivastava, Chandan (2014) Electrodeposition of Ag-Ni-Fe Nanowires. In: ECS ELECTROCHEMISTRY LETTERS, 3 (8). D27-D29.

Singh, Mahander Pratap and Srivastava, Chandan (2015) Synthesis and electron microscopy of high entropy alloy nanoparticles. In: MATERIALS LETTERS, 160 . pp. 419-422.

Singh, N and Acharya, S and Prashanth, KG and Chatterjee, K and Suwas, S (2021) Ti6Al7Nb-based TiB-reinforced composites by selective laser melting. In: Journal of Materials Research .

Singh, N and Sen Gupta, R and Bose, S (2024) A comprehensive review on singlet oxygen generation in nanomaterials and conjugated polymers for photodynamic therapy in the treatment of cancer. In: Nanoscale .

Singh, N and Srikanth, KP and Gopal, V and Rajput, M and Manivasagam, G and Prashanth, KG and Chatterjee, K and Suwas, S (2024) In situ production of low-modulus Ti-Nb alloys by selective laser melting and their functional assessment toward orthopedic applications. In: Journal of Materials Chemistry B, 12 (24). pp. 5982-5993.

Singh, N and Ummethala, R and Surreddi, KB and Jayaraj, J and Sokkalingam, R and Rajput, M and Chatterjee, K and Prashanth, KG (2022) Effect of TiB2 addition on the mechanical and biological response of spark plasma sintered Ti6Al7Nb matrix composites. In: Journal of Alloys and Compounds, 924 .

Singh, Neera and Edachery, Vimal and Rajput, Monika and Chatterjee, Kaushik and Kailas, Satish V and Prashanth, KG (2022) Ti6Al7Nb–TiB nanocomposites for ortho-implant applications. In: Journal of Materials Research . ISSN 0884-2914

Singh, P Bhagat and Sabat, R K and Kumaran, S and Suwas, S (2018) Effect of Aluminum Addition on the Evolution of Microstructure, Crystallographic Texture and Mechanical Properties of Single Phase Hexagonal Close Packed Mg-Li Alloys. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (2). pp. 864-874.

Singh, PS and Narayan, RL and Sen, Indrani and Hofmann, DC and Ramamurty, U (2012) Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite. In: Materials Science and Engineering: A, 534 . pp. 476-484.

Singh, Pratap M and Rekha, MY and Raghupathy, Y and Srivastava, C (2014) Electron microscopy of Ag-(Ni-O) core-shell nanowires. In: JOURNAL OF MICROSCOPY, 255 (3). pp. 174-179.

Singh, R and Jacob, KT (2003) Calculation of the oxygen potential profile across solid-state electrochemical cells. In: Journal of Applied Electrochemistry, 33 (7). pp. 571-576.

Singh, RN and Shivakumara, C and Vasanthacharya, NY and Hegde, MS and Sahana, M (1997) Colossal magnetoresistance in epitaxial La(1-x-y)NayMnO3 thin film. In: Applied Physics Letters, 70 (21). pp. 2909-2911.

Singh, RP and Saha, S (2021) Additives effect on the multiferroic behaviour of BiFeO3�PbTiO3. In: Ceramics International .

Singh, Ram Niwas and Shivakumara, C and Vasanthacharya, NY and Subramanian, S and Hegde, MS and Rajagopal, H and Sequiera, A (1998) Synthesis, Structure, and Properties of Sodium or Potassium-Doped Lanthanum Orthomanganites from NaCl or KCl Flux. In: Journal of Solid State Chemistry, 137 (1). pp. 19-27.

Singh, Randhir and Jacob, Thomas K (2004) Solution of transport equations in a mixed conductor––a generic approach. In: International Journal of Engineering Science, 42 (15-16). pp. 1587-1602.

Singh, S and Anil, AG and Khasnabis, S and Kumar, V and Nath, B and Adiga, V and Kumar Naik, TSS and Subramanian, S and Kumar, V and Singh, J and Ramamurthy, PC (2022) Sustainable removal of Cr(VI) using graphene oxide-zinc oxide nanohybrid: Adsorption kinetics, isotherms and thermodynamics. In: Environmental Research, 203 .

Singh, S and Anil, AG and Kumar, V and Kapoor, D and Subramanian, S and Singh, J and Ramamurthy, PC (2022) Nitrates in the environment: A critical review of their distribution, sensing techniques, ecological effects and remediation. In: Chemosphere, 287 .

Singh, S and Anil, AG and Naik, TSSK and U, B and Khasnabis, S and Nath, B and Kumar, V and Subramanian, S and Singh, J and Ramamurthy, PC (2022) Mechanism and kinetics of Cr(VI) adsorption on biochar derived from Citrobacter freundii under different pyrolysis temperatures. In: Journal of Water Process Engineering, 47 .

Singh, S and Kapoor, D and Khasnabis, S and Singh, J and Ramamurthy, PC (2021) Mechanism and kinetics of adsorption and removal of heavy metals from wastewater using nanomaterials. In: Environmental Chemistry Letters .

Singh, S and Khasnabis, S and Anil, AG and Kumar, V and Kumar Naik, TS and Nath, B and Garg, VK and Singh, J and Ramamurthy, PC (2022) Multifunctional nanohybrid for simultaneous detection and removal of Arsenic(III) from aqueous solutions. In: Chemosphere, 289 .

Singh, S and Kumar, V and Anil, AG and Kapoor, D and Khasnabis, S and Shekar, S and Pavithra, N and Samuel, J and Subramanian, S and Singh, J and Ramamurthy, PC (2021) Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy. In: Journal of Environmental Management, 300 .

Singh, S and Kumar, V and Anil, AG and Romero, R and Ramamurthy, PC and Singh, J (2021) Biodegradation of phorate by bacterial strains in the presence of humic acid and metal ions. In: Journal of Basic Microbiology, 62 (3-4). pp. 498-507.

Singh, S and Kumar Naik, TSS and Anil, AG and Dhiman, J and Kumar, V and Dhanjal, DS and Aguilar-Marcelino, L and Singh, J and Ramamurthy, PC (2022) Micro (nano) plastics in wastewater: A critical review on toxicity risk assessment, behaviour, environmental impact and challenges. In: Chemosphere, 290 .

Singh, S and Kumar Naik, TSS and Chauhan, V and Shehata, N and Kaur, H and Dhanjal, DS and Marcelino, LA and Bhati, S and Subramanian, S and Singh, J and Ramamurthy, PC (2022) Ecological effects, remediation, distribution, and sensing techniques of chromium. In: Chemosphere, 307 .

Singh, S and N, P and Naik, TSSK and Basavaraju, U and Thamaraiselvan, C and Behera, SK and Kour, R and Dwivedi, P and Subramanian, S and Khan, NA and Singh, J and Ramamurthy, PC (2023) Removal of Pb ions using green Co3O4 nanoparticles: Simulation, modeling, adsorption, and biological studies. In: Environmental Research, 222 .

Singh, S and Naik, TSSK and Basavaraju, U and Khan, NA and Wani, AB and Behera, SK and Nath, B and Bhati, S and Singh, J and Ramamurthy, PC (2022) A systematic study of arsenic adsorption and removal from aqueous environments using novel graphene oxide functionalized UiO-66-NDC nanocomposites. In: Scientific Reports, 12 (1).

Singh, S and Naik, TSSK and Basavaraju, U and Pavithra, N and Varshney, R and Chauhan, V and Shehata, N and Thamaraiselvan, C and Subramanian, S and Singh, J and Khan, NA and Zahmatkesh, S and Singh, L and Ramamurthy, PC (2023) Novel and sustainable green sulfur-doped carbon nanospheres via hydrothermal process for Cd (II) ion removal. In: Chemosphere, 328 .

Singh, S and Naik, TSSK and Shehata, N and Aguilar-Marcelino, L and Dhokne, K and Lonare, S and Chauhan, V and Kumar, A and Singh, J and Ramamurthy, PC and Khan, AH and Khan, NA and Dehghani, MH (2023) Novel insights into graphene oxide-based adsorbents for remediation of hazardous pollutants from aqueous solutions: A comprehensive review. In: Journal of Molecular Liquids, 369 .

Singh, S and Naik, TSSK and Thamaraiselvan, C and Behera, SK and N, P and Nath, B and Dwivedi, P and Singh, J and Ramamurthy, PC (2023) Applicability of new sustainable and efficient green metal-based nanoparticles for removal of Cr(VI): Adsorption anti-microbial, and DFT studies. In: Environmental Pollution, 320 .

Singh, S and Narasimhappa, P and Khan, NA and Chauhan, V and Shehata, N and Behera, SK and Singh, J and Ramamurthy, PC (2023) Effective voltammetric tool for Nano-detection of triazine herbicide (1-Chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine) by naphthalene derivative. In: Environmental Research, 236 .

Singh, S and Narasimhappa, P and Uppara, B and Behera, SK and Varshney, R and Naik, TSSK and Khan, NA and Singh, J and C Ramamurthy, P (2023) Bio-engineered sensing of Atrazine by green CdS quantum dots: Evidence from electrochemical studies and DFT simulations. In: Chemosphere, 345 .

Singh, S and Pavithra, N and Naik, TS and Varshney, R and Ramamurthy, PC (2022) Use of novel green synthesized C0304-NPs for electrochemical sensing of Pb ions. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore.

Singh, S and Pavithra, N and Uppara, B and Varshney, R and Shehata, N and Khan, NA and Joji, J and Singh, J and Ramamurthy, PC (2024) Facile Synthesis of ZIF-67-Incorporated Electrospun PVA Nanofibers Composite for Efficient Pb (II) Adsorption from Water: Docking and Experimental Studies. In: ACS ES and T Water .

Singh, S and Shaikh, SM and Kumar M K, P and Murty, BS and Srivastava, C (2020) Microstructural homogenization and substantial improvement in corrosion resistance of mechanically alloyed FeCoCrNiCu high entropy alloys by incorporation of carbon nanotubes. In: Materialia, 14 .

Singh, S and Shekar, S and Behera, SK and Shehata, N and Khan, NA and Singh, J and Ramamurthy, PC (2024) Synthesis, characterization, and application of thio-salicylaldehyde schiff base complexes for Cr (VI) adsorption. In: iScience, 27 (10).

Singh, S and Srivastava, C (2022) Effect of carbon nanotube incorporation on the evolution of morphology, phase and compositional homogeneity, surface oxide chemistry and corrosion behaviour of electrodeposited FeCuMnNiCo-carbon nanotube composite coatings. In: Electrochimica Acta, 439 .

Singh, S and Srivastava, C (2023) Engineering the Protective Oxide Chemistry for Enhanced Corrosion Protection Performance of FeCuCrNiCo-CNT Composite Coatings in 3.5 M NaCl Solution Corrosive Media. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Singh, S and Srivastava, C (2023) On the evolution of protective oxide chemistry and corrosion resistance of electrodeposited FeCrMnNiCo-carbon nanotube composite coatings. In: Philosophical Magazine .

Singh, SB and Goswami, R and Chattopadhyay, K (1993) Hardness behaviour of ultrafine dispersed materials with soft dispersoids: The case of rapidly solidified Zn-Bi immiscible alloy. In: Scripta Metallurgica et Materialia, 28 (12). pp. 1507-1512.

Singh, SK and Chattopadhyay, K and Dutta, P (2020) Determination of Optimum Process Parameters and Residual Stress in Friction Welding of Thixocast A356 Aluminum Alloy. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .

Singh, SK and Sushmita, K and Sharma, D and Waidi, YO and Bose, S (2023) Aerogels containing ionomers and microwave assisted growth of carbon nanostructures on carbon urchins for multifunctional electromagnetic interference shielding. In: Carbon, 209 .

Singh, SP and Huang, X-R and Kumar, P and Kassner, ME (2019) Short communication: Assessment of the dislocation density using X-ray topography in Al single crystals annealed for long times near the melting temperature. In: Materials Today Communications, 21 .

Singh, SP and Jayaram, V and Srinivasan, D and Kumar, P (2022) High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy. In: Additive Manufacturing, 58 .

Singh, SP and Kumar, P and Kassner, ME (2020) The low-stress and high-temperature creep in LiF single crystals: An explanation for the So-called Harper-Dorn creep. In: Materialia, 13 .

Singh, SP and Rijal, A and Straub, T and Han, J-K and Kennerknecht, T and Eberl, C and Kawasaki, M and Kumar, P (2022) Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks. In: Materials Characterization, 190 .

Singh, SV and Jayaram, V and Meka, JK and Thiruvenkatam, V and Vijayan, S and Bhardwaj, A and Burchell, MJ and Mason, NJ and Sivaraman, B (2023) Extraterrestrial Impacts Creating Architectures for Life. Springer.

Singh, Sanjay and Maniraj, M and D'Souza, SW and Ranjan, R and Barman, SR (2010) Structural transformations in Mn2NiGa due to residual stress. In: Applied Physics Letters, 96 (8).

Singh, Sanjay and Rawat, R and Muthu, S Esakki and D'Souza, SW and Suard, E and Senyshyn, A and Banik, S and Rajput, P and Bhardwaj, S and Awasthi, AM and Ranjan, Rajeev and Arumugam, S and Schlagel, DL and Lograsso, TA and Chakrabarti, Aparna and Barman, SR (2012) Spin-Valve-Like Magnetoresistance in Mn2NiGa at Room Temperature. In: PHYSICAL REVIEW LETTERS, 109 (24).

Singh, Sarab Preet and Ranjan, Rajeev and Senyshyn, Anatoliy and Trots, Dmytro and Boysen, Hans (2009) Structural phase transition study of the morphotropic phase boundary compositions of Na0.5Bi0.5TiO3-PbTiO3. In: Journal of Physics: Condensed Matter, 21 (37).

Singh, Satyaveer D and Bhowmik, A and Biswas, S and Suwas, Satyam S and Chattopadhyay, K (2009) Evolution of crystallographic texture during Equal Channel Angular Extrusion (ECAE) of brass. In: in Texture and Microstructure of Steels and Some Other Materials, 2009, London.

Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2012) Friction Welding of Thixocast A356 Aluminium Alloy. In: http://dx.doi.org/10.4028/www.scientific.net/SSP.192-193.305 , OCT 08-11, 2012 , Cape Town, SOUTH AFRICA, pp. 305-310.

Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2013) Friction Welding of Thixocast A356 Aluminium Alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2012), OCT 08-11, 2012, Cape Town, SOUTH AFRICA, pp. 305-310.

Singh, Shailesh K and Chattopadhyay, K and Phanikumar, G and Dutta, P (2014) Experimental and numerical studies on friction welding of thixocast A356 aluminum alloy. In: ACTA MATERIALIA, 73 . pp. 177-185.

Singh, Shailesh Kumar and Chattopadhyay, K and Dutta, Pradip (2015) High-Temperature Workability of Thixocast A356 Aluminum Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 3248-3259.

Singh, Shobhit Pratap and Barman, Binay Kumar Deb and Kumar, Praveen (2016) Cu-Bi alloys with high volume fraction of Bi: A material potentially suitable for thermal surge protection and energy storage. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 677 . pp. 140-152.

Singh, Simranjeet and Naik, TS Sunil Kumar and Anil, Amith G and Khasnabis, Sutripto and Nath, Bidisha and U, Basavaraju and Kumar, Vineet and Garg, VK and Subramanian, S and Singh, Joginder and Ramamurthy, Praveen C (2022) A novel CaO nanocomposite cross linked graphene oxide for Cr(VI) removal and sensing from wastewater. In: Chemosphere, 301 . ISSN 00456535

Singh, V and Gupta, GS (2006) Behaviour of granular material in packed bed under influence of gas injected through a nozzle. In: Proc. CHoPS-05, 2006, Sorrento, Italy.

Singh, V and Gupta, GS (2008) Modelling of single phase, non-wetting liquid flow in a coarse bed. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p561-567, 8-11 June, 2008, Sweden Lulea.

Singh, V and Gupta, GS (2006) Study of Non-Wetting Liquid Flow in a Bed of Monosized Particle Packing under the Influence of Lateral Gas Injection, 2006. In: TMS Annual Meeting, EPD Congress 2006 , Mar 2006, San Antonio, Texas, USA.

Singh, V and Gupta, GS (2006) A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow. In: Chemical Engineering Science, 61 (20). pp. 6855-6866.

Singh, V and Gupta, GS and Kitamura, S (2007) Modelling of raceway size and shape in mixed particle system. In: Procs. 6th IAS Ironmaking Conference, , Nov 2007, Rosario, Argentina.

Singh, V and Gupta, GS and Rajneesh, S (2006) Modelling of void initiation and breaking phenomena in a packed bed. In: Ironmaking & Steelmaking, 33 (2). pp. 101-110.

Singh, V and Gupta, GS and Rudolph, V (2006) Prediction of Minimum Spouting Velocity in Two-Dimensional Flat Bottom Spouted Beds. In: Chemical Engineering Communications, 193 (3). pp. 338-362.

Singh, VK and Jeevanaboina, K and Sahu, S and Bojjawar, G and Dova, K and Agarwal, S and Suwas, S and Makineni, SK and Ghosh, P (2024) On the Origin of Recovery-Induced Strengthening in CoCrNi Alloy. In: Advanced Engineering Materials .

Singh, Varsha and Gupta, GS and Sarkar, S (2007) Study of gas cavity size hysteresis in a packed bed using DEM. In: Chemical Engineering Science, 62 (22). pp. 6102-6111.

Singh, Y and Subramanian, S and Deshpande, RJ (2006) Surface chemical studies on graphite suspensions using inorganic dispersants. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Sinha, AK and Lahiri, AK (1987) Mass transfer between gas and liquid in Bottom Blown process. In: Transactions of the Iron and Steel Institute of Japan, 27 (7). pp. 560-562.

Sinha, S and Sahu, VK and Beura, V and Sonkusare, R and Kalsar, R and Das, AKL and Basu, J and Gurao, NP and Biswas, K (2021) Initial texture dependence of nanocrystalline omega phase formation during high pressure torsion of commercially pure titanium. In: Materials Science and Engineering A, 802 .

Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Morphology control synthesis of Au-Cu2S metal-semiconductor hybrid nanostructures by modulating reaction constituents. In: RSC ADVANCES, 5 (70). pp. 56629-56635.

Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Tunability of monodispersed intermetallic AuCu nanoparticles through understanding of reaction pathways. In: RSC ADVANCES, 5 (6). pp. 4399-4405.

Sinha, Subhasis and Kim, Dong-Ik and Fleury, Eric and Suwas, Satyam (2015) Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626 . pp. 175-185.

Sisodia, S and Jai Sai, N and Lu, K and Knöpfle, F and Zindal, A and Aktaa, J and Chauhan, A (2023) Effective and back stress evolution upon cycling oxide-dispersion strengthened steels. In: International Journal of Fatigue, 169 .

Sisodia, S. and Jananandhan, S. and Pakki, V.K. and Konkati, C. and Chauhan, A. (2023) Towards reducing tension-compression yield and cyclic asymmetry in pure magnesium and magnesium-aluminum alloy with cerium addition. In: Materials Science and Engineering: A, 886 .

Sivakesavam, O and Prasad, YVRK (2002) Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. In: Materials Science and Engineering A, 323 (1-2). pp. 270-277.

Sivakesavam, O and Prasad, YVRK (2003) Hot deformation behaviour of as-cast Mg-2Zn-1Mn alloy in compression: a study with processing map. In: Materials Science and Engineering A, 362 (1-2). pp. 118-124.

Sivakesavam, O and Prasad, YVRK (2003) Influence of homogenization on the processing map for hot working of as-cast Mg-2Zn-1Mn alloy. In: Zeitschrift für Metallkunde, 94 (11). pp. 1255-1259.

Sivakesavam, O and Prasad, YVRK (2022) Influence of homogenization on the processing map for hot working of as-cast Mg-2Zn-1Mn alloy. In: International Journal of Materials Research, 94 (11). pp. 1255-1259.

Sivaprahasam, D and Sriramamurthy, A M and Bysakh, S and Sundararajan, G and Chattopadhyay, K (2018) Role of Cu During Sintering of Fe0.96Cu0.04 Nanoparticles. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (4). pp. 1410-1424.

Sivaprahasam, Duraisamy and Sriramamurthy, AM and Vijayakumar, M and Sundararajan, G and Chattopadhyay, Kamanio (2010) Synthesis of FeCu Nanopowder by Levitational Gas Condensation Process. In: Metallurgical and Materials Transactions B, 41 (4). pp. 841-856.

Sivaprasad, PV and Mannan, SL and Prasad, YVRK (2004) Processing Parameters for the Mechanical Working of 9 Cr-1 Mo Steel: Processing Maps Approach. In: Materials Science and Technology, 20 (12). pp. 1545-1550.

Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .

Skrotzki, W and Dan Sathiaraj, G and Kalsar, R and Suwas, S (2020) Effect of stacking fault energy on microstructure and texture evolution during the rolling of non-equiatomic crmnfeconi high-entropy alloys. In: Crystals, 10 (7). pp. 1-12.

Skrotzki, W and Scheerbaum, N and Oertel, C-G and Brokmeier, H-G and Suwas, S and To'th, LS (2007) Recrystallization of high-purity aluminium during equal channel angular pressing. In: Acta Materialia, 55 (7). pp. 2211-2218.

Skrotzki, Werner and Scheerbaum, Nils and Oertel, Carl Georg and Arruffat-Massion, Roxane and Suwas, Satyam and Toth, Laszlo S (2007) Microstructure and texture gradient in copper deformed by equal channel angular pressing. In: Acta Materialia, 55 (6). pp. 2013-2024.

Smith, K K and Kassner, M E and Kumar, P (2017) Long-term annealing of high purity aluminum single crystals: New insights into Harper-Dorn creep. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 705 . pp. 1-5.

Somaiah, N and Kanjilal, A and Kumar, P (2020) Effects of an interfacial layer on stress relaxation mechanisms active in the Cu-Si thin film system during thermal cycling. In: MRS Communications, 10 (1). pp. 164-172.

Somaiah, N and Kumar, P (2020) Effect of Thermomigration–Electromigration Coupling on Mass Transport in Cu Thin Films. In: Journal of Electronic Materials, 49 (1). pp. 96-108.

Somaiah, N and Kumar, P (2018) Tuning electromigration-thermomigration coupling in Cu/W Blech structures. In: Journal of Applied Physics, 124 (18).

Somaiah, Nalla and Kumar, Praveen (2018) Inverse Blech Length Phenomenon in Thin-Film Stripes. In: PHYSICAL REVIEW APPLIED, 10 (5).

Somaiah, Nalla and Kumar, Praveen (2019) Tuning sample length effect on mass transport in current carrying Cu-Si thin-film systems via interfacial engineering. In: NANOTECHNOLOGY, 30 (48).

Somaiah, Nalla and Sharma, Deepak and Kumar, Praveen (2016) Electric current induced forward and anomalous backward mass transport. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 49 (20).

Somani, MC and Birla, NC and Prasad, YVRK and Singh, V (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy. In: Journal of Materials Processing Technology, 52 (2-4). pp. 225-237.

Somani, MC and Muraleedharan, K and Birla, NC and Singh, V and Prasad, YVRK (1994) Hot deformation characteristics of INCONEL alloy MA 754 and development of a processing map. In: Metallurgical and materials transactions A, 25 (8). 1693-1702 .

Somani, MC and Muraleedharan, K and Prasad, YVRK and Singh, V (1998) Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy. In: Materials Science and Engineering A, 245 (01). pp. 88-99.

Somani, MC and Rao, Bhagiradha ES and Birla, NC and Bhatia, ML and Singh, Vakil and Prasad, YVRK (1992) Processing map for controlling microstructure in hot working of hot isostatically pressed powder metallurgy NIMONIC AP-1 superalloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (10). pp. 2849-2857.

Somasekharan, L and Xavier, P and Bose, S and Zachariah, AK and Kalarikkal, N and Anil Kumar, S and Thomas, S (2020) Natural rubber nanocomposites with MWCNT@POSS hybrid filler: Preparation and properties. In: Polymer Composites, 41 (1). pp. 369-380.

Somasundaran, P and Deo, N and Natarajan, KA (2000) Utility of bioreagents in mineral processing. In: Minerals and Metallurgica Processing, 17 (02). pp. 112-115.

Sonawane, D and Choudhury, A and Kumar, P (2020) New Insights into Dewetting of Cu Thin Films Deposited on Si. In: Langmuir, 36 (20). pp. 5534-5545.

Sonawane, D and Kumar, P (2019) Effect of accelerated thermal cyclic loading on structural reliability of cu-filled TSV. In: 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC), 4-6 Dec. 2019, Singapore, Singapore, pp. 1-5.

Sonawane, D and Kumar, P (2020) New insights into fracture of Si in Cu-filled through silicon via during and after thermal annealing. In: Engineering Fracture Mechanics, 238 .

Sonawane, D and Kumar, P (2021) Stability of Cu-islands formed on Si substrate via 'dewetting' under subsequent thermal cycling. In: Nanotechnology, 32 (19).

Sonawane, D and Ramamurthy, PC and Kumar, P (2020) Mechanical Reliability of Photovoltaic Cells under Cyclic Thermal Loading. In: Journal of Electronic Materials, 49 (1). pp. 59-71.

Sonawane, Dipali and Oberoi, Sudhi and Kumar, Praveen (2016) Effect of aspect ratio of test specimens on quasistatic compression loading and stress-relaxation of PDMS and a Cu-filled-PDMS composite. In: POLYMER TESTING, 55 . pp. 173-183.

Song, D Y and Gupta, G S and Maruoka, N and Shibata, H and Kitamura, S and Rudolph, V (2017) Study of Two Phase Emulsion Systems. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 70 (8). pp. 2027-2038.

Song, Duk-Yong and Maruoka, Nobuhiro and Gupta, Govind Sharan and Shibata, Hiroyuki and Kitamura, Shin-Ya and Kamble, Smita (2012) Modeling of Ascending/Descending Velocity of Metal Droplet Emulsified in Pb-Salt System. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 43 (4). pp. 973-983.

Song, Duk-Yong and Maruoka, Nobuhiro and Gupta, Govind Sharan and Shibata, Hiroyuki and Kitamura, Shin-ya and Sasaki, Naoto and Ogawa, Yuji and Matsuo, Michitaka (2012) Influence of Bottom Bubbling Rate on Formation of Metal Emulsion in Al-Cu Alloy and Molten Salt System. In: ISIJ International, 52 (6). pp. 1018-1025.

Soni, R and Jhavar, S and Tyeb, S and Gupta, SK and Suwas, S and Chatterjee, K (2022) Wire Arc Additive Manufacturing of Zinc as a Degradable Metallic Biomaterial. In: Journal of Functional Biomaterials, 13 (4).

Sonkusare, R and Biswas, K and Al-Hamdany, N and Brokmeier, HG and Kalsar, R and Schell, N and Gurao, NP (2020) A critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloy. In: Materials Science and Engineering A, 782 .

Sonkusare, Reshma and Janani, P Divya and Gurao, N P and Sarkar, S and Sen, S and Pradeep, K G and Biswas, Krishanu (2018) Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy. In: MATERIALS CHEMISTRY AND PHYSICS, 210 (SI). pp. 269-278.

Sonti, KSM and Dash, B and Vamsi, KV and Bandyopadhyay, H and Ravisankar, B and Sivaprasad, K and Karthikeyan, S (2021) Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates. In: Journal of Alloys and Compounds, 873 .

Sover, A and Ermolai, V and Raichur, AM and Ciobanu, R and Aradoaei, M and Lucanu, N (2021) Feasibility of producing core-shell filaments through fused filament fabrication. In: Polymers, 13 (23).

Spencer, Elinor C and Kiran, Mangalampalli SRN and Li, Wei and Ramamurty, Upadrasta and Ross, Nancy L and Cheetham, Anthony K (2014) Pressure-Induced Bond Rearrangement and Reversible Phase Transformation in a Metal-Organic Framework. In: ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 53 (22). pp. 5583-5586.

Srai, Jagjit Singh and Kumar, Mukesh and Graham, Gary and Phillips, Wendy and Tooze, James and Ford, Simon and Beecher, Paul and Raj, Baldev and Gregory, Mike and Tiwari, Manoj Kumar and Ravi, B and Neely, Andy and Shankar, Ravi and Charnley, Fiona and Tiwari, Ashutosh (2016) Distributed manufacturing: scope, challenges and opportunities. In: INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 54 (23, SI). pp. 6917-6935.

Sreedhar S, A and Ravindran, S and Shankar, G and Suwas, S and Narasimhan, R (2021) Fracture mechanism and toughness of a rolled magnesium alloy under dynamic loading. In: Acta Materialia, 202 . pp. 350-365.

Sreedhara, MB and Barua, Manaswee and Chaturvedi, Abhishek and Rao, CNR and Ramamurty, Upadrasta (2018) Borocarbonitride, (BN)(x)(C)(1-x,) nanosheet-reinforced polymer nanocomposites for high mechanical performance. In: CARBON, 140 . pp. 688-695.

Sridhar, S and Ge, L and Tiwary, CS and Hart, AC and Ozden, S and Kalaga, K and Lei, S and Sridhar, SV and Sinha, RK and Harsh, H and Kordas, K and Ajayan, PM and Vajtai, R (2014) Enhanced Field Emission Properties from CNT Arrays Synthesized on Inconel Superalloy. In: ACS APPLIED MATERIALS & INTERFACES, 6 (3). pp. 1986-1991.

Sridhar, Srividya and Tiwary, Chandrasekhar and Vinod, Soumya and Taha-Tijerina, Jose Jaime and Sridhar, Srividvatha and Kalaga, Kaushik and Sirota, Benjamin and Hart, Amelia HC and Ozden, Sehmus and Sinha, Ravindra Kumar and Harsh, H and Vajtai, Robert and Choi, Wongbong and Kordas, Krisztian and Ajayan, Pulickel M (2014) Field Emission with Ultra low Turn On Voltage from Metal Decorated Carbon Nanotubes. In: ACS NANO, 8 (8). pp. 7763-7770.

Sridharan, K and Chattopadhyay, K (1998) Synthesis by mechanical alloying and thermoelectric properties of Cu2Te. In: Journal of Alloys and Compounds, 264 (1-2). pp. 293-298.

Srikant, G and Chollacoop, N and Ramamurty, U (2006) Plastic strain distribution underneath a Vickers Indenter: Role of yield strength and work hardening exponent. In: Acta Materialia, 54 (19). pp. 5171-5178.

Srikanth, S and Jacob, KT (1989) Thermodynamic properties of copper-nickel alloys: measurements and assessment. In: Materials Science and Technology, 5 (5). pp. 427-434.

Srikanth, S and Iyengar, GNK and Jacob, KT (1990) Phase equilibria in the Co Ni F system and activities in (CoxNi1 x)F2 solid solutions at 1373 K. In: High temperature science, 30 (1). pp. 11-18.

Srikanth, S and Jacob, KT (1989) Discussion of thermodynamic consistency of the interaction parameter formalism. In: Metallurgical and Materials Transactions B, 20B (3). pp. 434-437.

Srikanth, S and Jacob, KT (1989) Extension of Darken's Quadratic Formalism to Dilute Multicomponent Solutions. In: ISIJ International, 29 (2). pp. 171-174.

Srikanth, S and Jacob, KT (1988) Thermodynamic consistency of the interaction parameter formalism. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 19 (2). pp. 269-275.

Srikanth, S and Jacob, KT (1991) Thermodynamics Of Aluminum Strontium Alloys. In: Zeitschrift für Metallkunde, 82 (9). pp. 675-683.

Srikanth, S and Jacob, KT (1991) Thermodynamics of Aluminum-Barium Alloys. In: Metallurgical and Materials Transactions B, 22 (5). pp. 606-616.

Srikanth, S and Jacob, KT (1991) Vapor-Pressure Of Calcium Corresponding To The Reduction Of Calcia By Aluminum. In: Transactions of the Indian Institute of Metals, 44 (5). 369 -373.

Srikanth, S and Jacob, KT (1988) Volume effects and associations in liquid alloys. In: Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, 19 (3). pp. 465-470.

Srikanth, S and Jacob, KT (1989) A modified least squares algorithm to treat associations in liquid alloys. In: Calphad, 13 (2). pp. 149-158.

Srikanth, S and Jacob, KT and Abraham, KP (1989) Representation of Thermodynamic Properties of Dilute Multi-Component Solutions--Options and Constraints. In: Steel Research, 60 (1). pp. 6-11.

Srikanth, S and Jacob, KT and Allibert, M and Srinivasan, VS (1991) Alloy oxide equilibria in the system Ca Al O at 1373 K. In: Revue Internationale des Hautes Temperatures et des Refractaires, 27 (3). pp. 131-139.

Srikanth, Srinivasan and Jacob, Thomas (1991) Thermodynamics of Aluminium -Strontium Alloys. In: Zeitschrift für Metallkunde, 82 (9). pp. 675-683.

Srikantha, S and Jacob, KT (1989) Activities in liquid Ga-Te alloys at 1120 k. In: Thermochimica Acta, 153 . pp. 27-35.

Srimannarayana, P and Vamsi, KV and Karthikeyan, S (2015) Multi-scale modelling of Suzuki segregation in gamma' precipitates in Ni and Co-base superalloys. In: 2nd European Symposium on Superalloys and their Applications, MAY 12-16, 2014, Giens, FRANCE.

Srinatha, N and No, YS and Kamble, Vinayak B and Chakravarty, Sujoy and Suriyamurthy, N and Angadi, Basavaraj and Umarji, AM and Choi, WK (2016) Effect of RF power on the structural, optical and gas sensing properties of RF-sputtered Al doped ZnO thin films. In: RSC ADVANCES, 6 (12). pp. 9779-9788.

Srinivasa Rao, S and Anantharaman, TR (1961) The occurrence of a hexagonal phase in quenched 60:40 brass. In: Die Naturwissenschaften, 48 (23). p. 712.

Srinivasan, Dheepa and Chattopadhyay, K (2005) Non-equilibrium Transformations Involving $L1_2-Al_3Zr$ in Ternary Al-X-Zr Alloys. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 36A (2). pp. 311-320.

Srinivasan, D (2021) Challenges in Qualifying Additive Manufacturing for Turbine Components: A Review. In: Transactions of the Indian Institute of Metals, 74 (5). pp. 1107-1128.

Srinivasan, D and Ananth, K (2022) Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review. In: Journal of the Indian Institute of Science .

Srinivasan, D and Chattopadhyay, K (2004) Hardness of high strength nanocomposite Al–X–Zr (X = Si,Cu,Ni) alloys. In: Materials Science and Engineering A, 375-37 . pp. 1228-1234.

Srinivasan, D and Chattopadhyay, K (1997) Nanocomposite microstructure in a melt spun Al-Cu-Zr alloy. In: Materials Science Forum, 243 . pp. 251-256.

Srinivasan, D and Sastry, * and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat-treatment on the strength and fracture-behavior of fe-12cr-6al ferritic stainless-steel. In: Journal of Materials Science Letters, 17 (10). pp. 3009-3016.

Srinivasan, D and Singh, A and Reddy, AS and Chatterjee, K (2020) Microstructural study and mechanical characterisation of heat-treated direct metal laser sintered Ti6Al4V for biomedical applications. In: Materials Technology . (In Press)

Srinivasan, D and Surappa, MK (1992) Effect of Iron Impurity and Thermomechanical Processing on the Age-Hardening Behaviour of 6061 $Al-SiC_p$ MMC Produced by Casting Route. In: Scripta Metallurgica et Materialia, 27 (9). pp. 1139-1144.

Srinivasan, Dheepa and Chattopadhyay, K (1998) Formation and coarsening of a nanodispersed microstructure in melt spun Al–Ni–Zr alloy. In: Materials Science and Engineering A, 255 (1-2). pp. 107-116.

Srinivasan, Dheepa and Chattopadhyay, K (2001) Metastable phase evolution and hardness of nanocrystalline Al–Si–Zr alloys. In: Materials Science and Engineering A, 304-30 . pp. 534-539.

Srinivasan, Dheepa and Jayaram, Vikram and Das, PK and Chattopadhyay, K (1998) Nanodispersed Microstructures on Laser Mixing of Al-Ni Multilayers. In: Scripta Materialia, 38 (6). pp. 857-861.

Srinivasan, N and Prasad, YVRK (1992) Characterisation of dynamic recrystallisation in nickel using processing map for hot deformation. In: Materials Science and Technology, 8 (3). pp. 206-212.

Srinivasan, N and Prasad, YVRK (1995) Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps. In: Journal of Materials Processing Technlogy, 51 (1-4). pp. 171-192.

Srinivasan, N and Prasad, YVRK (1994) Hot-working characteristics of nichrome and the development of a processing map. In: Journal of Materials Processing Technology, 41 (4). pp. 409-424.

Srinivasan, N and Prasad, YVRK (1992) Influence of sulfur on the processing map for hot working of nickel. In: Scripta Metallurgica et Materialia, 27 (3). pp. 309-312.

Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). pp. 2275-2284.

Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). 2275 -2284 .

Srinivasan, N and Prasad, YVRK (1994) Processing map for hot working of Ni–16Cr–8Fe alloy (IN 600). In: Materials Science and Technology, 10 (5). 377-383 .

Srinivasan, N and Prasad, YVRK and Rao, P Rama (2008) Hot deformation behaviour of Mg–3Al alloy—A study using processing map. In: Materials Science and Engineering A, 476 (1-2). pp. 146-156.

Srinivasan, NS and Lahiri, AK (1977) Studies on the reduction of hematite by carbon. In: Metallurgical and Materials Transactions B, 8 (1). pp. 175-178.

Srinivasan, S and Ranganathan, S (2006) Nonferrous Materials Heritage of Mankind. In: Transactions of The Indian Institute of Metals, 59 (6). pp. 829-846.

Srinivasan, Sharada (1996) The Archaeometallurgical Implications of New Findings of Traditional Crafts of Making High Tin ‘Delta’ Bronze Mirrors and ‘Beta’ Bronze Vessels in Kerala State of South India. In: MRS Proceedings, 462 . p. 81.

Srinivasan, Sharada (2011) Crucible Steel in South India-Preliminary Investigations on Crucibles from Some Newly Identified Sites. In: MRS Proceedings, 462 . p. 111.

Srinivasan, Sharada (1998) The use of tin and bronze in prehistoric southern Indian metallurgy. In: JOM Journal of the Minerals, Metals and Materials Society, 50 (07). pp. 44-48.

Srinivasan, VS and Sandhya, R and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel. In: Scripta Materialia, 37 (10). pp. 1593-1598.

Srinivasan, VS and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1996) Low cycle fatigue behaviour of a nitrogen modified 316L stainless steel at 823 K. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA, pp. 489-495.

Srinivasan, VS and Valsan, M and Sandhya, R and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (1999) High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel. In: International Journal of Fatigue, 21 (1). pp. 11-21.

Srinivasulu, G and Ghosal, P and Singh, N and Naze, L and Nandy, TK and Kumar, V and Kutumbarao, VV and Banerjee, D and Strudel, JL (2014) Monotonic and low cycle fatigue behavior of an O+B2 alloy at high temperatures. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 599 . pp. 268-278.

Sripriya, Jaganathan and Anandhakumar, Sundaramurthy and Achiraman, Shanmugam and Antony, Jacob Joe and Siva, Durairaj and Raichur, Ashok M (2013) Laser receptive polyelectrolyte thin films doped with biosynthesized silver nanoparticles for antibacterial coatings and drug delivery applications. In: INTERNATIONAL JOURNAL OF PHARMACEUTICS, 457 (1). pp. 206-213.

Srirangarajan, Aarti and Datta, Aditi and Gandi, Appala Naidu and Ramamurty, U and Waghmare, UV (2014) Universal binding energy relation for cleaved and structurally relaxed surfaces. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 26 (5).

Srither, Satturappa Ravisekaran and Dhineshbabu, Nattanmai Raman (2019) Synthesis and characterisation of FeTiO3 perovskite nanomaterials for electrochemical energy storage application. In: MICRO & NANO LETTERS, 14 (5). pp. 475-478.

Srivastava, A and Verma, A and Saraf, S and Jain, A and Tiwari, A and Panda, PK and Jain, SK (2020) Mucoadhesive gastroretentive microparticulate system for programmed delivery of famotidine and clarithromycin. In: Journal of Microencapsulation .

Srivastava, AK (2023) EVOLUTION OF ORDER: EVOLUTION OF MICROSTRUCTURE DURING SPRAY ATOMIZATION AND DEPOSITION OF ALFe-V-Si AND Al-Mn-Cr-Si ALLOYS. [Book Chapter]

Srivastava, AK (2023) EVOLUTION OF ORDER: EVOLUTION OF MICROSTRUCTURE DURING SPRAY ATOMIZATION AND DEPOSITION OF ALFe-V-Si AND Al-Mn-Cr-Si ALLOYS. [Book Chapter]

Srivastava, AK and Ojha, SN and Ranganathan, S (1998) Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy. In: Metallurgical and Materials Transactions A, 29 (08). pp. 2205-2219.

Srivastava, AK and Ojha, SN and Ranganathan, S (2001) Microstructural features associated with spray atomization and deposition of Al-Mn-Cr-Si alloy. In: Journal of Materials Science, 36 (14). pp. 3335-3341.

Srivastava, AK and Ranganathan, S (2001) Microstructural characterization of rapidly solidified Al-Fe-Si, Al-V-SI, and Al-Fe-V-Si alloys. In: Journal of Materials Research, 16 (7). pp. 2103-2117.

Srivastava, AK and Ranganathan, S (1992) A Novel Microstructure in a Rapidly Solidified $Al_{80}Fe_{10}V_4Si_6$ Alloy. In: Scripta Metallurgica et Materialia, 27 (9). pp. 1241-1245.

Srivastava, AK and Ranganathan, S (1996) Quasicrystals, crystals and multiple twins in rapidly solidified Al-Cr-Si, Al-Mn-Si and Al-Mn-Cr-Si alloys. In: Acta Materialia, 44 (7). pp. 2935-2946.

Srivastava, AK and Ranganathan, S (1997) Twinning of quasicrystals and related crystals. In: Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 251-262.

Srivastava, AK and Srivastava, CM and Mahesh, R and Rao, CNR (1996) A ferromagnetic resonance study of La1-xCaxMnO3. In: Solid State Communications, 99 (3). 161-165 .

Srivastava, C and Chithra, S and Malviya, KD and Sinha, SK and Chattopadhyay, K (2011) Size dependent microstructure for Ag-Ni nanoparticles. In: Acta Materialia, 59 (16). pp. 6501-6509.

Srivastava, Chandan (2012) Nano-size and miscibility gap. In: Advances in Materials and Processing, 585 . pp. 8-13.

Srivastava, Chandan (2012) Phase separation by nanoparticle splitting. In: Materials Letters, 70 . pp. 122-124.

Srivastava, Chandan and Mundotiya, Brij Mohan (2013) Electron microscopy of microstructural transformation in electrodeposited Ni-rich, Ag-Ni film. In: THIN SOLID FILMS, 539 . pp. 102-107.

Srivastava, Chandan and Mundotiya, Brij Mohan (2012) Morphology Dependence of Ag-Ni Solid Solubility. In: Electrochemical and Solid-State Letters, 15 (2). K10-K15.

Srivastava, Chandan and Rai, Rajesh Kumar (2013) Transmission electron microscopy study of Ni-rich, Ag-Ni nanowires. In: CHEMICAL PHYSICS LETTERS, 575 . pp. 91-96.

Srivastava, Chandan and Rai, Rajesh Kumar (2013) Two phase microstructure for Ag-Ni nanowires. In: CHEMICAL PHYSICS LETTERS, 561 . pp. 101-106.

Srivastava, Chandan and Sinha, Shyam Kanta (2011) Ultra fine scale phase separated microstructure for Ag-Fe nanoparticle. In: Chemical Physics Letters, 514 (4-6). pp. 307-310.

Srivastava, Chandan and Sushma, KVL (2012) Compositionally Graded Microstructure for Ag-Fe Nanoparticles. In: NANO-MICRO LETTERS, 4 (3). pp. 172-175.

Srivastava, Chandan and Sushma, KVL (2014) Effect of Reflux Time on Nanoparticle Shape. In: MICROSCOPY AND MICROANALYSIS, 20 (3). pp. 847-851.

Srivastava, D and Dey, GK and Banerjee, S and Ranganathan, S (1997) Crystallography of Hydride Formation in Zr-Nb Alloys. In: MRS Proceedings, 481 . p. 315.

Srivastava, D and Madangopal, K and Banerjee, S and Ranganathan, S (1993) Self accomodation morphology of martensite variants in Zr---2.5wt%Nb alloy. In: Acta Metallurgica et Materialia, 41 (12). pp. 3445-3454.

Srivastava, D and Mukhopadhyay, P and Banerjee, S and Ranganathan, S (2000) Morphology and substructure of lath martensites in dilute Zr=Nb alloys. In: Materials Science and Engineering, 288 (01). pp. 101-110.

Srivastava, M and Chaudhuri, A and Bera, P and Ravisankar, B and Balaraju, JN (2021) Characterization of electrodeposited zirconia modified nicocraly composite coatings isothermally oxidized at 1000 âc. In: Surface Review and Letters . (In Press)

Srivastava, M and Chaudhuri, A and Bera, P and Ravisankar, B and Balaraju, JN (2021) Characterization of electrodeposited zirconia modified nicocraly composite coatings isothermally oxidized at 1000c. In: Surface Review and Letters, 28 (3).

Srivastava, P and Singh, C and Joshi, A and Chatterjee, K and Nain, A (2023) MXene: Chemistry, Attributes, and Applications for Electrochemical Energy Storage. [Book Chapter]

Srivastava, Rajesh Kumar and Xavier, Priti and Gupta, Satyendra Nath and Kar, Goutam Prasanna and Bose, Suryasarathi and Sood, AK (2016) Excellent Electromagnetic Interference Shielding by Graphene- MnFe2O4-Multiwalled Carbon Nanotube Hybrids at Very Low Weight Percentage in Polymer Matrix. In: CHEMISTRYSELECT, 1 (18). pp. 5995-6003.

Srivastava, S and Ramamurthy, PC (2022) Effect of Light on the p-type Doping of P3HT OFET by Oxygen. In: 2022 IEEE International Conference on Emerging Electronics, ICEE 2022, 11- 14 Dec 2022, Bangalore, India.

Srivatsa, S and Kumar, S and Grabowski, K and Jain, P and Nayak, MM and Uhl, T and Sen, P (2020) Numerical and experimental investigations of pure MXene (Ti3C2Tx) film and MXene nanocomposites for structural health monitoring. In: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 27 Apr-08 May - 2020.

Sterneland, J and Lahiri, AK (1999) Contraction and meltdown behaviour of olivine iron ore pellets under simulated blast furnace conditions. In: Ironmaking and Steelmaking, 26 (5). pp. 339-348.

Stevenson, JD and Eibl, J and Curbach, M and Johnson, TE and Daye, MA and Riera, JD and Krutzik, NJ and Nemet, J and Iyengar, KTS (1992) Advances in the analysis and design of concrete structures, metal containments and liner plate for extreme loads. In: Nuclear Engineering and Design, 134 (1). pp. 87-107.

Stoesser, Anna and von Seggern, Falk and Purohit, Suneeti and Nasr, Babak and Kruk, Robert and Dehm, Simone and Wang, Di and Hahn, Horst and Dasgupta, Subho (2016) Facile fabrication of electrolyte-gated single-crystalline cuprous oxide nanowire field-effect transistors. In: NANOTECHNOLOGY, 27 (41).

Su, Y and Liang, C and Sun, X and Zhang, H and Liang, Q and Zheng, Y and Hao, Y and Yang, R and Wang, D and Banerjee, D and Wang, Y (2023) Composition-dependent shuffle-shear coupling and shuffle-regulated strain glass transition in compositionally modulated Ti-Nb alloys. In: Acta Materialia, 246 .

Subrahmanyam, J and LahirI, AK and Abraham, KP (1978) Thermodynamic Evaluation of Optimum Conditions for Chemical Vapor-Deposition of Boron From BBR3-H2 Mixtures. In: Indian Journal of Technology, 16 (6). 238-241 .

Subrahmanyam, J and Lahiri, AK and Abraham, KP (1980) Kinetics of Chemical Vapor Deposition. In: Journal of Electrochemical Society, 127 (6). pp. 1394-1399.

Subramaniam, A and Ranganathan, S (2004) Vacancy ordered phases in Al–Cu–Ni as average lattices. In: Journal of Non-Crystalline Solids, 334 . pp. 114-116.

Subramaniam, Anandh and Lord, EA (2003) Pentagonal and trigonal quasilattices and their approximants. In: Zeitschrift Fur Kristallographie, 218 (3). pp. 182-186.

Subramanian, C and Kishore, * (1984) Influence of Graphite Type, Modification and Hot Working on Wear of Aluminium Based Particulate Composites. In: Journal of Reinforced Plastics and Composites, 3 (4). pp. 278-293.

Subramanian, S and Lahiri, AK and Jain, AKNK (1989) Electroslag remelting studies on the simultaneous desulfurization and dephosphorization of En24 steel using sodium carbonate. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 121-125.

Subramanian, S and Natarajan, KA (1987) Selective flocculation studies on iron ore minerals. In: Transactions of the Indian Institute of Metals, 40 (6). pp. 489-496.

Subramanian, S and Natarajan, KA and Sathyanarayana, DN (1989) FTIR spectroscopic studies on the adsorption of an oxidized starch on some oxide minerals. In: Minerals & Metallurgical Processing, 6 (3). pp. 152-158.

Subramanian, C (1988) Wear lip formation during dry sliding. In: Wear, 126 (1). pp. 57-67.

Subramanian, C and Subramanian, DK (1989) Performance Analysis of Voting Strategies for a Fly-by-Wire System of a Fighter Aircraft. In: IEEE Transactions on Automatic Control, 34 (9). pp. 1018-1021.

Subramanian, S and Bhat, KL (1992) Recovery of copper from vanadiferrous magnetite ore of Masanikere area, Shimoga district. In: Indian Journal of Technology, 30 (6). pp. 281-284.

Subramanian, S and Haran, NP and Kumar, GS and Gundewar, CS and Louis, KT (2006) Characterisation and cyanide leach amenability studies on gold ore samples from some Indian deposits. In: Proc. International Seminar on Mineral Processing Technology (MPT 2006) and Indo-Korean Workshop on Resource Recycling, 2006, Indo-Korean.

Subramanian, S and Natarajan, KA (1989) Adsorption behaviour of an oxidised starch onto haematite in the presence of calcium. In: Minerals Engineering, 2 (1). pp. 55-64.

Subramanian, S and Natarajan, KA (1991) Flocculation, filtration and selective flocculation studies on haematite ore fines using starch. In: Minerals Engineering, 4 (5). 587-598 .

Subramanian, S and Natarajan, KA (1988) Some studies on the adsorption behaviour of an oxidised starch onto haematite. In: Minerals Engineering, 3 (1). pp. 241-254.

Subramanian, S and Natarajan, KA (1997) Special Issue on Mineral Processing - Preface. In: Transactions of the Indian Institute of Metals, 50 (5). U3-U4.

Subramanian, S and Natarajan, KA (1988) Zeta Potential Studies On Some Iron-Ore Minerals In The Presence Of Starches. In: Transactions of the Indian Institute of Metals, 41 (3). pp. 255-263.

Subramanian, S and Ravishankar, H and Vasanthakumar, B (2016) Enhancement of Flotation Selectivity of Sphalerite Using Mineral-Stressed Paenibacillus polymyxa and Its Cellular Components. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 69 (1). pp. 67-74.

Subramanian, S and Santhiya, D and Natarajan, KA (2003) Surface modification studies on sulphide minerals using bioreagents. In: International Journal of Mineral Processing, 72 (1-4). pp. 175-188.

Subramanian, S and Sharma, AK and Rajendra, A and Gowda, Amitha S and Saravanan, L (2007) Studies on dispersion stabilization of hard and soft coating materials for space applications. In: Procs. Conference On Advances In Space Science And Technology (CASST'2007), , Jan 2007, Bangalore.

Subramanyam, M (1925) The Aluminium Anode Film Dielectric. In: Journal of the Indian Institute of Science, 8 (Part B). pp. 11-21.

Sudarshan, * and Surappa, MK (2008) Dry sliding wear of fly ash particle reinforced A356 Al composites. In: Wear, 265 (3-4). pp. 349-360.

Sudarshan, * and Surappa, MK (2006) Processing and characterization of fly ash particle reinforced A356 Al composites. In: Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium, 2006.

Sudarshan, * and Surappa, MK (2008) Synthesis of fly ash particle reinforced A356 Al composites and their characterization. In: Materials Science and Engineering: A, 480 (1-2). pp. 117-124.

Sudarshan, M and Surappa, MK and Ahn, Dongjoon and Raj, Rishi (2008) Nanoceramic-Metal Matrix Composites by In-Situ Pyrolysis of Organic Precursors in a Liquid Melt. In: Metallurgical and Materials Transactions A, 39A (13). pp. 3291-3297.

Sudhakar, KV and Dwarakadasa, ES (2000) A study on fatigue crack growth in dual phase martensitic steel in air environment. In: Bulletin of Materials Science, 23 (3). pp. 193-199.

Sudhakar, KV and Murty, GS (1998) Fracture toughness correlation with microstructure and other mechanical properties in near-eutectoid steel. In: Bulletin of Materials Science, 21 (3). pp. 241-245.

Sudhakar, KV and Sampathkumaran, P and Dwarakadasa, ES (2000) Dry sliding wear in high density Fe-2%Ni based P/M alloys. In: Wear, 242 (1-2). pp. 207-212.

Sudhir, B and Chokshi, AH (2001) Compressive creep studies on alumina particulate reinforced alumino-silicate glass. In: International Conference on Superplasticity in Advanced Materials (ICSAM-2000), 1-4 Aug. 2000, Switzerland, pp. 123-128.

Sudhir, B and Chokshi, Atul H (2001) Compression Creep Characteristics of 8-mol%-Yttria-Stabilized Cubic-Zirconia. In: Journal of the American Ceramic Society, 84 (11). pp. 2625-2632.

Sudhir, B and Chokshi, Atul H (2003) Creep characterization of alumina particulate reinforced alumino-silicate glass. In: Journal of Non-Crystalline Solids, 316 (1). pp. 167-173.

Sujata, M and Sastry, DH and Ramachandra, C (2004) Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V. In: Intermetallics, 12 (7-9). pp. 691-697.

Sulyaeva, VS and Gatapova, EY and Kozhevnikov, AK and Rogilo, DI and Saraev, AA and Yushina, IV and Khomyakov, MN and Shapovalova, AA and Shayapov, VR and Bhaskar, N and Tu, R and Kosinova, ML (2021) CHEMICAL STRUCTURE AND FUNCTIONAL PROPERTIES OF AMORPHOUS BORON CARBONITRIDE FILMS. In: Journal of Structural Chemistry, 62 (8). pp. 1309-1324.

Sun, B and Lu, W and Gault, B and Ding, R and Makineni, SK and Wan, D and Wu, C-H and Chen, H and Ponge, D and Raabe, D (2021) Chemical heterogeneity enhances hydrogen resistance in high-strength steels. In: Nature Materials .

Sundar, RS and Baligidad, RG and Prasad, YVRK and Sastry, DH (1998) Processing of iron aluminides. In: Materials Science and Engineering A, 258 (1-2). pp. 219-228.

Sundar, RS and Kutty, TRG and Sastry, DH (2000) Hot hardness and creep of $Fe_3Al$-based alloys. In: Intermetallics, 8 (4). pp. 427-437.

Sundar, RS and Sastry, DH (2000) Creep behaviour of $Fe_3Al$-based alloys in $DO_3$ phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.

Sundar, RS and Sastry, DH (2000) Creep behaviour of Fe3Al-based alloys in DO3 phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.

Sundar, RS and Sastry, DH (1996) Effect of microstructure on the creep behaviour of Ti-24Al-11Nb. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA.

Sundar, RS and Sastry, DH and Prasad, YVRK (2003) Hot workability of as-cast Fe3Al-2.5%Cr intermetallic alloy. In: Materials Science and Engineering A, 347 (1-2). pp. 86-92.

Sundaram, H and Raghupatruni, P (2022) Residual Stress, Microstructure, and Characterization of Self-Mated Additive Repair of Inconel 718 Alloy Using Cold Spray Process. In: 151st Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2022, 27 February - 3 March 2022, Anaheim, pp. 225-237.

Sundararaman, D and Raghunathan, VS and Ranganathan, S (1995) Correlation of resistivity and microstructure in dilute titaniulll–nitrogen alloy. In: Materials Science and Technology, 11 (8). pp. 729-733.

Sundararaman, D and Ranganathan, S and Raghunathan, VS (1996) A High-Resolution Transmission of the Precipitation Process in a Electron Microscopy Study Dilute Ti-N Alloy. In: Metallurgical And Materials Transactions A, 27 (10). pp. 2966-2977.

Sundaresan, R and Raghuram, AC and Mallya, RM and Vasu, KI (1996) Sintering of beta titanium: Role of dislocation pipe diffusion. In: Powder Metallurgy, 39 (2). pp. 138-142.

Sunder, R and Raut, D and Jayaram, V and Kumar, P and Shastri, V (2021) Near-tip residual stress as an independent load interaction mechanism. In: International Journal of Fatigue, 151 .

Sunil Kumar Naik, TS and Saravanan, S and Sri Saravana, KN and Pratiush, U and Ramamurthy, PC (2020) A non-enzymatic urea sensor based on the nickel sulfide / graphene oxide modified glassy carbon electrode. In: Materials Chemistry and Physics, 245 .

Sunil Kumar Naik, TS and Singh, S and N, P and Varshney, R and Uppara, B and Singh, J and Khan, NA and Singh, L and Zulqarnain Arshad, M and C Ramamurthy, P (2023) Advanced experimental techniques for the sensitive detection of a toxic bisphenol A using UiO-66-NDC/GO-based electrochemical sensor. In: Chemosphere, 311 .

Suntharavel Muthaiah, VM and Rajput, M and Tripathi, A and Suwas, S and Chatterjee, K (2022) Electrophoretic Deposition of Nanocrystalline Calcium Phosphate Coating for Augmenting Bioactivity of Additively Manufactured Ti-6Al-4V. In: ACS Materials Au, 2 (2). pp. 132-142.

Surappa, MK (2003) Aluminium Matrix Composites: Challenges and Opportunities. In: Sadhana, 28 (1-2). pp. 319-334.

Surappa, MK (1997) Microstructure evolution during solidification of DRMMCs (discontinuously reinforced metal matrix composites): State of art. In: Journal of Materials Processing Technology, 63 (1-3). pp. 325-333.

Surappa, MK (1993) On the nature of particle flow during extrusion of cast 6061 Al/SiCP composites. In: Journal of Materials Science Letters, 12 (16). pp. 1272-1273.

Surappa, MK (2016) World university rankings and subject ranking in engineering and technology (2015-2016): a case for greater transparency. In: CURRENT SCIENCE, 111 (3). pp. 461-464.

Surappa, MK and Sivakumar, P (1993) Fracture Toughness Evaluation of $2040-Al/Al_2O_3$ Particulate Composites by Instrumented Impact. In: Composites Science and Technology, 46 (3). pp. 287-292.

Suresh, D and Kishore, * and Rohatgi, PK (1981) Working experience with a foundry solar furnace. In: Solar Energy, 27 (6). pp. 457-462.

Suresh, D and Rohatgi, PK (1981) Heat transfer analysis on metal-melting in a foundry solar furnace. In: Solar Energy, 26 (1). pp. 87-90.

Suresh, D and Rohatgi, PK (1979) Melting and casting of alloys in a solar furnace. In: Solar Energy, 23 (6). pp. 553-555.

Suresh, D and Rohatgi, PK and Coutures, JP (1981) Use of solar furnaces .1. materials research. In: Solar Energy, 26 (5). pp. 377-390.

Suresh, KS and Bhaumik, Subir K and Suwas, Satyam (2013) Effect of thermal and thermo-mechanical cycling on the microstructure of Ni-rich NiTi shape memory alloys. In: Materials Letters, 99 . pp. 150-153.

Suresh, KS and Geetha, M and Richard, C and Landoulsi, J and Ramasawmy, H and Suwas, S and Asokamani, R (2012) Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 32 (4). pp. 763-771.

Suresh, KS and Gurao, NP and Singh, Satyaveer D and Suwas, Satyam and Chattopadhyay, K and Zherebtsov, SV and Salishchev, GA (2013) Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti-13Nb-13Zr. In: MATERIALS CHARACTERIZATION, 82 . pp. 73-85.

Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2013) Evolution of microstructure and texture in Ni49.4Ti38.6Hf12 shape memory alloy during hot rolling. In: Intermetallics, 42 . pp. 1-8.

Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2012) Interrelation of grain boundary microstructure and texture in a hot rolled Ni-rich NiTi alloy. In: Scripta Materialia, 66 (8). pp. 602-605.

Suresh, KS and Kim, DongIk and Bhaumik, SK and Suwas, Satyam (2014) Evolution and stability of phases in a high temperature shape memory alloy Ni49.4Ti38.6Hf12. In: INTERMETALLICS, 44 . pp. 18-25.

Suresh, KS and Kumar, N and Mishra, RS and Suwas, S (2013) Evolution of microstructure and texture in friction stir processed Al-Mg-Mn alloy. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013, Sydney, AUSTRALIA, pp. 247-250.

Suresh, KS and Lahiri, Debrupa and Agarwal, Arvind and Suwas, Satyam (2015) Microstructure dependent elastic modulus variation in NiTi shape memory alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, 633 . pp. 71-74. (In Press)

Suresh, KS and Lahiri, I and Kaur, G and Kumar, V and Bibhanshu, N (2020) Influence of surface texture and composition on graphene growth by chemical vapor deposition on Cu�Ni alloys for field emission application. In: ACS Applied Nano Materials, 3 (10). pp. 9804-9812.

Suresh, KS and Rollett, AD and Suwas, Satyam (2016) Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (2). pp. 852-868.

Suresh, KS and Rollett, AD and Suwas, Satyam (2013) Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer. In: Metallurgical and Materials Transactions A, 44A (8). pp. 3866-3881.

Suresh, KS and Sinha, Subhasis and Chaudhary, Abhishek and Suwas, Satyam (2012) Development of microstructure and texture in Copper during warm accumulative roll bonding. In: MATERIALS CHARACTERIZATION, 70 . pp. 74-82.

Suresh, M and Kalsar, R and More, AM and Bisht, A and Nayan, N and Suwas, S (2021) Evolution of microstructure and texture in the third generation Al�Li alloy AA2195 during warm hybrid processing. In: Journal of Alloys and Compounds, 855 .

Suresh, M and Sharma, A and More, A M and Nayan, N and Suwas, S (2015) Effect of Scandium addition on evolution of microstructure, texture and mechanical properties of thermo-mechanically processed Al-Li alloy AA2195. In: JOURNAL OF ALLOYS AND COMPOUNDS, 740 . pp. 364-374.

Suresh, M and Sharma, A and More, AM and Kalsar, R and Bisht, A and Nayan, N and Suwas, S (2019) Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195. In: JOURNAL OF ALLOYS AND COMPOUNDS, 785 . pp. 972-983.

Suresh, MR and Avadhani, GS (2006) Hot Deformation Characteristics of 0.3C-CrMoV(ESR) Steel. In: Proc,Intl.Conf. & Exhibition on Pressure vessels and Piping, OPE-2006, Feb 7-9 2006, Chennai, India.

Suresh, N and Ramamurty, U (2008) Aging response and its effect on the functional properties of Cu–Al–Ni shape memory alloys. In: Journal of Alloys and Compounds, 449 (1-2). 113-118.

Suresh, N and Ramamurty, U (2005) The effect of ageing on the damping properties of Cu-Al-Ni shape memory alloys. In: Smart Materials & Structures, 14 (5). N47-N51.

Suresh, S and Gidey, AT and Chowdhury, TH and Rondiya, SR and Tao, L and Liu, J and Vermang, B and Uhl, AR (2024) Rear Surface Passivation for Ink-Based, Submicron CuIn(S, Se)2 Solar Cells. In: Advanced Energy Materials .

Suresha, B and Siddaramaiah, * and Kishore, * and Seetharamu, S and Kumaran, P Sampath (2009) Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites. In: Wear, 267 (9-10). pp. 1405-1414.

Suresha, SJ and Bhide, R and Jayaram, V and Biswas, SK (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. In: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 429 (1-2). 252 -260.

Suresha, SJ and Math, S and Jayaram, V and Biswas, SK (2007) Toughening through multilayering in TiN–AlTiN films. In: Philosophical Magazine, 87 (17). pp. 2521-2539.

Suriyakumar, Shruti and Gopi, Sivalingam and Kathiresan, Murugavel and Bose, Suriyasarathi and Gowd, E. Bhoje and Nair, Jijeesh R. and Angulakshmi, Natarajan and Meligrana, Giuseppina and Bella, Federico and Gerbaldi, Claudio and Stephan, A Manuel (2018) Metal organic framework laden poly(ethylene oxide) based composite electrolytes for all-solid-state Li-S and Li-metal polymer batteries. In: ELECTROCHIMICA ACTA, 285 . pp. 355-364.

Suryawanshi, J and Baskaran, T and Prakash, O and Arya, SB and Ramamurty, U (2018) On the corrosion resistance of some selective laser melted alloys. In: Materialia, 3 . pp. 153-161.

Suryawanshi, Jyoti and Prashanth, K G and Ramamurty, U (2017) Mechanical behavior of selective laser melted 316L stainless steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 696 . pp. 113-121.

Suryawanshi, Jyoti and Prashanth, K G and Ramamurty, U (2017) Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting. In: JOURNAL OF ALLOYS AND COMPOUNDS, 725 . pp. 355-364.

Suryawanshi, Jyoti and Prashanth, KG and Scudino, S and Eckert, J and Prakash, Om and Ramamurty, U (2016) Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting. In: ACTA MATERIALIA, 115 . pp. 285-294.

Sushmita, K and Formanek, P and Fischer, D and Potschke, P and Madras, G and Bose, S (2021) Ultrathin structures derived from interfacially modified polymeric nanocomposites to curb electromagnetic pollution. In: Nanoscale Advances, 3 (9). pp. 2632-2648.

Sushmita, K and Formanek, P and Krause, B and Patschke, P and Bose, S (2021) Distribution of Carbon Nanotubes in Polycarbonate-Based Blends for Electromagnetic Interference Shielding. In: ACS Applied Nano Materials .

Sushmita, K and Ghosh, D and Nilawar, S and Bose, S (2022) Absorption Dominated Directional Electromagnetic Interference Shielding through Asymmetry in a Multilayered Construct with an Exceptionally High Green Index. In: ACS Applied Materials and Interfaces, 14 (43). pp. 49140-49157.

Sushmita, K and Maiti, S and Bose, S (2022) Multi-layered composites using polyurethane-based foams and 3D-printed structures to curb electromagnetic pollution. In: Materials Advances, 3 (11). pp. 4578-4599.

Sushmita, K and Muzata, TS and Avasarala, S and Banerjee, P and Sharma, D and Bose, S (2022) Crystallization behavior of carbon nanotube polymer nanocomposites. [Book Chapter]

Sushmita, KS and Madras, G and Bose, S (2020) Polymer nanocomposites containing sEMIconductors as advanced materials for EMI shielding. In: ACS Applied Materials and Interfaces, 5 (10). pp. 4705-4718.

Sushmita, Kumari and Menon, Taishwarya V and Sharma, Shubham and Abhyankar, Ashutosh C and Madras, Giridhar and Bose, Suryasarathi (2019) Mechanistic Insight into the Nature of Dopants in Graphene Derivatives Influencing Electromagnetic Interference Shielding Properties in Hybrid Polymer Nanocomposites. In: JOURNAL OF PHYSICAL CHEMISTRY C, 123 (4). pp. 2579-2590.

Suwas, S and Bisht, A and Jagadeesh, G (2020) Microstructural changes in materials under shock and high strain rate processes: recent updates. [Book Chapter]

Suwas, S and Gurao, NP (2014) Development of Microstructures and Textures by Cross Rolling. [Book Chapter]

Suwas, Satyam and Beausir, B and Toth, LS and Fundenberger, JJ and Gottstein, G (2011) Texture evolution in commercially pure titanium after warm equal channel angular extrusion. In: Acta Materialia, 59 (3). pp. 1121-1133.

Suwas, Satyam and Bhowmik, Ayan and Biswas, Somjeet (2009) Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, INDIA, pp. 325-344.

Suwas, Satyam and Biswas, Somjeet and Singh, Satyaveer D and Chattopadhyay, Kamanio (2008) Texture and grain boundary character distribution during Equal Channel Angular Extrusion of some two-phase copper alloys. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.

Suwas, Satyam and Gottstein, G and Kumar, R (2007) Evolution of Crystallographic Texture during equal channel Angular Extrusion (ECAE) and its effects on secondary processing of magnesium. In: Materials Science and Engineering: A, 471 (1-2). pp. 1-14.

Suwas, Satyam and Gurao, Nilesh P and Ali, Ashkar (2009) Evolution of Transformation Texture in a Metastable B - Titanium Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 617-628.

Suwas, Satyam and Massion, R Arruffat and Toth, LS and Fundenberger, JJ and Beausir, B (2009) Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations. In: Materials Science and Engineering A, 520 (1-2). pp. 134-146.

Suwas, Satyam and Mondal, Soumita (2019) Texture Evolution in Severe Plastic Deformation Processes. In: MATERIALS TRANSACTIONS, 60 (8). pp. 1457-1471.

Suwas, Satyam and Ranganathan, S and Gurao, NP and Garg, Rohini (2011) Evolution of texture and grain boundary microstructure in two-phase (α + β) brass during recrystallization. In: Philosophical Magazine, 91 (32). pp. 4089-4108.

Suwas, Satyam and Suresh, KS and Rollett, AD (2012) Texture and microstructure evolution during cold rolling of Cu-Fe laminates prepared by accumulative roll bonding. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, p. 170.

Suzuki, S and Jacob, KT and Waseda, Y and Kang, SC and Saito, M (1998) XPS study of the effect of Ar-Ion bombardment and aging on surface properties of superionic conducting glass (CuI)0.3 (Cu2O)0.35 (MoO3)0.35. In: Materials Transactions, JIM, 39 (10). pp. 1024-1028.

Swaminathan, S and Jacob, KT (1989) A Comment on the Nomenclature of Invariant Three-Phase Equilibria. In: Bulletin of Alloy Phase Diagrams, 10 (4). pp. 329-331.

Swaminathan, S and Rao, BS and Jayaram, V (2002) The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg. In: Materials Science and Engineering A, 337 (1-2). pp. 134-139.

Swaminathan, S and Rao, Srinivasa B and Jayaram, V (2002) The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen. In: Acta Materialia, 50 (12). pp. 3093-3104.

Swamy, VT and Chattopadhyay, K and Ranganathan, S (1990) The Nature of Metastable Phase Formation in the Microsecond Pulsed Laser-melted Pool of Al-Ge Eutectic Alloy. In: Materials Science and Engineering A, 123 (2). pp. 247-254.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1992) Microstructural development in microsecond pulsed laser elted polycrystalline nickel. In: Journal of Materials Science, 27 (5). 1375 -1379.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1989) On the resolidification behavior of microsecond pulsed-laser-melted pool of bismuth. In: Journal of Crystal Growth, 96 (3). pp. 628-636.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1989) Rapidly solidified Al–Cr alloys: Crystalline and quasicrystalline phases. In: Journal of Materials Research, 4 (3). pp. 539-551.

Swaroop, S and Chokshi, AH (2003) Role of diffusion creep in a superplastic zirconia-alumina composite. In: Materials Science Forum, 447-4 . pp. 323-328.

Swaroop, Sathya and Kilo, Martin and Argirusis, Christos and Borchardt, Gunter and Chokshi, Atul H (2005) Lattice and grain boundary diffusion of cations in 3YTZ analyzed using SIMS. In: Acta Materialia, 53 (19). pp. 4975-4985.

Swathi, S K and Ranjith, K and Khanum, Khadija K and Ramamurthy, Praveen C (2018) Effect of process optimization on electronic properties of conjugated small molecules. In: MATERIALS RESEARCH EXPRESS, 5 (8).

Swathi, SK and Jeevananda, T and Ramamurthy, Praveen C (2010) Fabrication of device quality films of high loaded PPy/MWCNT nanocomposites using pulsed laser deposition. In: Organic Electronics, 11 (9). pp. 1489-1499.

Swathi, SK and Ramamurthy, Praveen C and Garner, Sean M (2015) In-situ flexural OPV measurements on flexible glass substrate. In: IEEE 42nd Photovoltaic Specialist Conference (PVSC), JUN 14-19, 2015, New Orleans, LA.

Swathi, SK and Ranjith, K and Khanum, KK and Ramamurthy, PC (2021) Structure and Morphology-Dependent Electrical Characteristics of Conjugated Organic Crystals Acquired by Various Growth Methods. In: Journal of Electronic Materials .

Swathi, SK and Ranjith, K and Kumar, Prajwal and Ramamurthy, Praveen C (2012) Novel thiophene derivative hybrid composite solar cells. In: Solar Energy Materials and Solar Cells, 96 (1). pp. 101-107.

Swathi, SK and Rao, Arun D and Ranjith, K and Kumar, Rajneesh and Ramakrishna, SA and Ramamurthy, Praveen C (2013) Device Fabrication of insoluble donor-acceptor-donor structured molecule by pulsed laser deposition- A comparative study using different laser source. In: 2nd Conference of the Optics-and-Photonics-Society-of-Singapore / International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN), APR 09-11, 2013, Singapore, SINGAPORE.

Swathilakshmi, S and Devi, R and Sai Gautam, G (2023) Performance of the r2SCAN Functional in Transition Metal Oxides. In: Journal of chemical theory and computation, 19 (13). pp. 4202-4215.

Syal, R and Goel, R and De, A and Kumar Singh, A and Sharma, G and Thakur, OP and Kumar, S (2021) Flattening of free energy profile and enhancement of energy storage efficiency near morphotropic phase boundary in lead-free BZT-xBCT. In: Journal of Alloys and Compounds, 873 .

Syal, R and Kumar, M and Singh, AK and De, A and Thakur, OP and Kumar, S (2020) Enhancement in the piezoelectric properties in lead-free BZT-xBCT dense ceramics. In: Journal of Materials Science: Materials in Electronics, 31 (23). pp. 21651-21660.

sarkar, J and Surappa, MK (1994) Serrated yielding in thermomechanically processed 6061 $Al-SiC_p$ composite. In: Journal of Materials Science Letters, 13 (11). pp. 835-837.

T

T, Chandrasekaran and *, Kishore (1992) Grinding abrasive wear and associated particle size effect. In: Materials Science and Technology, 8 (8). pp. 722-727.

Tadge, T and Garje, S and Saxena, V and Raichur, AM (2023) Application of Shape Memory and Self-Healable Polymers/Composites in the Biomedical Field: A Review. In: ACS Omega, 8 (36). pp. 32294-32310.

Taha-Tijerina, Jaime and Venkataramani, Deepika and Aichele, Clint P and Tiwary, Chandra Sekhar and Smay, James E and Mathkar, Akshay and Chang, Patricia and Ajayan, Pulickel M (2015) Quantification of the Particle Size and Stability of Graphene Oxide in a Variety of Solvents. In: PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION, 32 (3). pp. 334-339.

Taha-Tijerina, Jose Jaime and Narayanan, Tharangattu Narayanan and Tiwary, Chandra Sekhar and Lozano, Karen and Chipara, Mircea and Ajayan, Pulickel M (2014) Nanodiamond-Based Thermal Fluids. In: ACS APPLIED MATERIALS & INTERFACES, 6 (7). pp. 4778-4785.

Takeuchi, A and Ranganathan, S and Murty, BS and Inoue, A (2008) Analysis of Composition Dependence of Formation of Ternary Bulk Metallic Glasses from Crystallographic Data on Ternary Compounds. In: Reviews on Advanced Materials Science, 18 (1). pp. 56-60.

Takeuchi, Akira and Murty, Budaraju Srinivasa and Hasegawa, Masashi and Ranganathan, Srinivasa and Inoue, Akihisa (2007) Analysis of Bulk Metallic Glass Formation Using a Tetrahedron Composition Diagram that Consists of Constituent Classes Based on Blocks of Elements in the Periodic Table. In: Materials Transactions, 48 (6). pp. 1304-1312.

Talebanpour, B and Sahaym, U and Dutta, I and Kumar, P (2014) EFFECT OF AGING ON IMPRESSION CREEP BEHAVIOR OF Pb-FREE SOLDERS. In: ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, JUL 16-18, 2013, Burlingame, CA.

Talukder, S and Gogoi, B and Kumar, P and Pratap, R and Maoz, R and Sagiv, J (2019) Advanced nanopatterning using scanning probe technology. In: 2017 International Conference on Nanotechnology: Ideas, Innovations and Initiatives, ICN:3i 2017, 6 - 8 December 2017, Roorkee, pp. 740-743.

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2015) Controlled material transport and multidimensional patterning at small length scales using electromigration. In: CURRENT SCIENCE, 108 (12). pp. 2167-2172.

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2013) Electric current-induced mass flow in very thin infinite metallic films. In: IEEE Transactions on Electron Devices, 60 (9). pp. 2877-2883.

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2015) Electrolithography- A New and Versatile Process for Nano Patterning. In: SCIENTIFIC REPORTS, 5 .

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2014) Film thickness mediated transition in the kinetics of electric current induced flow of thin liquid metal films. In: APPLIED PHYSICS LETTERS, 104 (21).

Talukder, Santanu and Kumar, Praveen and Pratap, Rudra (2015) Nanoscale patterning in ambient conditions using liquid electromigration. In: Conference on Alternative Lithographic Technologies VIII, FEB 22-25, 2016, San Jose, CA.

Talukder, Santanu and Somaiah, Nalla and Kumar, Praveen (2013) Effect of substrate surface roughness on electric current induced flow of liquid metals. In: APPLIED PHYSICS LETTERS, 102 (5).

Tamaki, S and Jacob, KT and Waseda, Y and Cusack, NE and Tsuchiya, Y (1980) A derivation of thermodynamic quantities of liquid alloys from their structure factors. In: Journal of Physics F: Metal Physics, 10 (4). L109-L113.

Tamhankar, RV (1980) Emerging trends in super-alloy processing and applications. In: Transactions of the Indian Institute of Metals, 33 (2). 101-112 .

Tamirisakandala, S and Yellapregada, PVRK and Medeiros, SC and Frazier, WG and Malas, JC and Dutta, B (2003) High-Speed Deformation Processing of a Titanium Alloy. In: Advanced Engineering Materials, 5 (9). 667 -669.

Tan, P and Kumar, P and Dutta, I (2020) A cutting mechanism map for machining metallic sheets using electric current pulses. In: Engineering Research Express, 2 (2).

Tandaiya, P and Ramamurty, U and Narasimhan, R (2009) Mixed mode (I and II) crack tip fields in bulk metallic glasses. In: Journal of the Mechanics and Physics of Solids, 57 (11). pp. 1880-1897.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2007) Mode I crack tip fields in amorphous materials with application to metallic glasses. In: Acta Materialia, 55 (19). pp. 6541-6552.

Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2013) On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass. In: Acta Materialia, 61 (5). pp. 1558-1570.

Tandaiya, Parag and Ramamurty, U and Narasimhan, R (2009) Mixed mode (I and II) crack tip fields in bulk metallic glasses. In: Journal of the Mechanics and Physics of Solids, 57 (11). pp. 1880-1897.

Tandaiya, Parag and Ramamurty, U and Narasimhan, R (2011) On numerical implementation of an isotropic elastic-viscoplastic constitutive model for bulk metallic glasses. In: Modelling and Simulation in Materials Science and Engineering, 19 (1).

Tangri, K and Sastry, DH (1975) Dislocation mechanisms for plastic flow of nickel in the temperature range 4.2 – 1200 K. In: Philosophical Magazine, 32 (3). pp. 513-525.

Tao, M and Chokshi, AH and Conner, RD and Ravichandran, G and Johnson, WL (2010) Deformation and crystallization of Zr-based amorphous alloys in homogeneous flow regime. In: Journal of Materials Research, 25 (6). pp. 1137-1148.

Tarafdar, G and Kesavan, AV and Pandey, UK and Ramamurthy, PC (2018) Effect of meso substituent on Optoelectronic Properties in BODIPY based donor acceptor Copolymers. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Tarafdar, Gourav and Sengupta, Sanchita and Pandey, Upendra K and Ramamurthy, Praveen C (2019) Effect of structural isomerism in BODIPY based donor-acceptor co-polymers on their photovoltaic performance. In: SOLAR ENERGY, 186 . pp. 215-224.

Tarafdar, Gourav and Sengupta, Sanchita and Pandey, Upendra K and Ramamurthy, Praveen C (2017) Effect of structural isomerism on charge transport in copolymer of BODIPY and Benzodithiophene. In: 43rd IEEE Photovoltaic Specialists Conference (PVSC), JUN 05-10, 2016, Portland, OR, pp. 1664-1669.

Tas Kavakbasi, B and Golovin, IS and Paul, A and Divinski, SV (2018) On the analysis of composition profiles in binary single-phase diffusion couples: Systems with a strong compositional dependence of the interdiffusion coefficient. In: 10th International Conference on Diffusion in Materials, DIMAT 2017, 7 - 12 May 2017, Haifa, pp. 23-30.

Tasbihi, Minoo and Kete, Marko and Raichur, Ashok M and Tusar, Natasa Novak and Stangar, Urska Lavrencic (2012) Photocatalytic degradation of gaseous toluene by using immobilized titania/silica on aluminum sheets. In: ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 19 (9). pp. 3735-3742.

Tekliye, DB and Kumar, A and Weihang, X and Mercy, TD and Canepa, P and Sai Gautam, G (2022) Exploration of NaSICON Frameworks as Calcium-Ion Battery Electrodes. In: Chemistry of Materials . 10133 -10143.

Tekumalla, S and Bibhanshu, N and Suwas, S and Gupta, M (2019) Superior ductility in magnesium alloy-based nanocomposites: the crucial role of texture induced by nanoparticles. In: Journal of Materials Science .

Tekumalla, Sravya and Bibhanshu, Nitish and Shabadi, Rajashekara and Suwas, Satyam and Ha, Thi Mai Hoa and Gupta, Manoj (2018) Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 727 . pp. 61-69.

Tekumalla, Sravya and Nandigam, Yogesh and Bibhanshu, Nitish and Rajashekara, Shabadi and Yang, Chen and Suwas, Satyam and Gupta, Manoj (2018) A strong and deformable in-situ magnesium nanocomposite igniting above 1000 degrees C. In: SCIENTIFIC REPORTS, 8 .

Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 1 � Low magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .

Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 2- High magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .

Tendeloo, Van G and Menon, J and Singh, A and Ranganathan, S (1989) Electron diffraction studies of variable periodicity in decagonal quasicrystals in aluminium-cobalt alloys. In: Phase Transitions, 16 (1-4). pp. 59-65.

Tendeloo, van G and Singh, Alok and Ranganathan, S (1991) Quasicrystals and their crystalline homologues in the Al-Mn-Cu ternary alloys. In: Philosophical Magazine A & B, 64 (2). 413 -427.

Tennyson, Gerald P and Kumar, PV and Lakshmi, H and Phanikumar, G and Dutta, P (2010) Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S774-S780.

Thakur, A and Chauhan, V and Ramamurthy, PC (2022) Design and synthesis of a polymer for Cr(III) ions sensing. In: 2022 IEEE International Conference on Emerging Electronics, 11- 14 Dec 2022, Bangalore.

Thangamani, Nithyanantham and Gandhi, Ashutosh S and Jayaram, Vikram and Chokshi, Atul H (2005) Low-Temperature High-Pressure Consolidation of Amorphous $Al_{2}O_{3}-15\hspace{5mm}{mol\%}\hspace{5mm}Y_{2}O_{3}$. In: Journal of the American Ceramic Society, 88 (10). pp. 2696-2701.

Thangamani, Nithyanantham and Chinnakali, Kandasamy and Gnanam, FD (2002) The effect of powder processing on densification, microstructure and mechanical properties of hydroxyapatite. In: Ceramics International, 28 (4). 355-362 .

Thangaraj, N and Subbanna, GN and Ranganathan, S and Chattopadhyay, K (1987) Electron microscopy and diffraction of icosahedral and decagonal quasicrystals in aluminum-manganese alloys. In: Journal of Microscopy, 146 (3). pp. 287-302.

Thirumal, E and Prabhu, D and Chattopadhyay, K and Ravichandran, V (2010) Magnetic, electric, and dielectric properties of FeCo alloy nanoparticles dispersed in amorphous matrix. In: Physica Status Solidi A, 207 (11). pp. 2505-2510.

Thirumal, E and Prabhu, D and Chattopadhyay, K and Ravichandran, V (2010) Synthesis, magnetic and electrical properties of Fe-containing SiO2 nanocomposite. In: Journal of Alloys and Compounds, 502 (1). pp. 169-175.

Thirumurugan, M and Kumaran, S and Suwas, Satyam and Rao, Srinivasa T (2011) Effect of rolling temperature and reduction in thickness on microstructure and mechanical properties of ZM21 magnesium alloy and its subsequent annealing treatment. In: Materials Science and Engineering A, 528 (29-30). pp. 8460-8468.

Thiyaneshwaran, N and Sivaprasad, K and Ravisankar, B and Dash, B and Karthikeyan, S (2022) Dynamic Compression Behavior of Ti/TiAl3/Al Metal Intermetallic Laminates. In: Journal of Materials Engineering and Performance .

Thomas, Jayasree and Riyazulla, MS and Subramanian, S and Vasudev, VN and Gundewar, CS (2008) Electron Microprobe and Mineralogical Study on Cobalt Bearing Sulphide from the Kalyadi Copper Mine, Hassan District, Karnataka. In: Journal of the Geological Society of India, 71 (2). pp. 257-260.

Thomas, Ajith and Tom, Anju Elsa and Rao, Arun D and Varman, Arul and Ranjith, K and Vinayakan, R and Ramamurthy, Praveen C and Ison, VV (2014) Solvent polarity and nanoscale morphology in bulk heterojunction organic solar cells: A case study. In: JOURNAL OF APPLIED PHYSICS, 115 (10).

Thomas, J and Riyaz Ulla, MS and Louis, KT and Gundewar, CS and Subramanian, S (2006) Studies on the biodissolution of cobaltic pyrite from copper tailings. In: Proceedings of the XXIII International Mineral Processing Congress, Sep 2006, Turkey.

Thomas, Midhun B and Radhakrishnan, Krishna and Gnanadhas, Divya P and Chakravortty, Dipshikha and Raichur, Ashok M (2013) Intracellular delivery of doxorubicin encapsulated in novel pH-responsive chitosan/heparin nanocapsules. In: International Journal of Nanomedicine, 8 . pp. 267-273.

Thota, Narayana and Gurubhaskar, M and Sunil, Anantha M and Prathap, P and Subbaiah, Venkata Y P and Tiwari, Ashutosh (2017) Effect of metal layer stacking order on the growth of Cu(2)ZnSnS(4)thin films. In: APPLIED SURFACE SCIENCE, 396 . pp. 644-651.

Tina, GA and Muleta, GJ and Adhikary, GD and Ranjan, R (2023) Is electrostrain &gt;1 in oxygen deficient Na0.5Bi0.5TiO3 a composition effect? In: Oxford Open Materials Science, 3 (1).

Tina, GA and Punetha, P and Adhikary, GD and Ranjan, R (2024) Simultaneous increase in piezoelectric response and Curie point in BaTiO3 based Pb-free piezoceramic. In: Scripta Materialia, 243 .

Tippireddy, S and Chetty, R and Naik, MH and Jain, M and Chattopadhyay, K and Mallik, RC (2018) Electronic and Thermoelectric Properties of Transition Metal Substituted Tetrahedrites. In: Journal of Physical Chemistry C, 122 (16). pp. 8735-8749.

Tiwari, A and Gajbhiye, V and Jain, A and Verma, A and Shaikh, A and Salve, R and Jain, SK (2022) Hyaluronic acid functionalized liposomes embedded in biodegradable beads for duo drugs delivery to oxaliplatin-resistant colon cancer. In: Journal of Drug Delivery Science and Technology, 77 .

Tiwari, K and Manolata Devi, M and Biswas, K and Chattopadhyay, K (2021) Phase transformation behavior in nanoalloys. In: Progress in Materials Science .

Tiwari, RS and Claus, JC and Ranganathan, S (1989) Kinetics of two-stage crystallization in Metglas 2826A. In: Journal of Materials Science, 24 (12). pp. 4399-4402.

Tiwary, C S and Mudakavi, Rajeev J and Kishore, Sharan and Kashyap, Sanjay and Elumalai, Rajasegaran and Chakravortty, Dipshikha and Raichur, Ashok M and Chattopadhyay, K (2016) Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents. In: RSC ADVANCES, 6 (115). pp. 114344-114352.

Tiwary, C S and Prakash, J and Chakraborty, S and Mahapatra, D R and Chattopadhyay, K (2018) Subsurface deformation studies of aluminium during wear and its theoretical understanding using molecular dynamics. In: PHILOSOPHICAL MAGAZINE, 98 (29, A). pp. 2680-2700.

Tiwary, CS and Chakraborty, S and Mahapatra, DR and Chattopadhyay, K (2014) Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification. In: JOURNAL OF APPLIED PHYSICS, 115 (20).

Tiwary, CS and Javvaji, B and Kumar, C and Mahapatra, DR and Ozden, S and Ajayan, PM and Chattopadhyay, K (2015) Chemical-free graphene by unzipping carbon nanotubes using cryo-milling. In: CARBON, 89 . pp. 217-224.

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2014) Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al-Cu-Ni eutectic system. In: SCRIPTA MATERIALIA, 93 . pp. 20-23.

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . pp. 200-207.

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast Nb-Si eutectic alloy. In: Materials Science and Technology, 29 (6). pp. 702-709.

Tiwary, CS and Kashyap, S and Kim, DH and Chattopadhyay, K (2015) Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 639 . pp. 359-369.

Tiwary, CS and Kishore, S and Vasireddi, R and Mahapatra, DR and Ajayan, PM and Chattopadhyay, K (2017) Electronic waste recycling via cryo-milling and nanoparticle beneficiation. In: MATERIALS TODAY, 20 (2). pp. 67-73.

Tiwary, CS and Kumbhakar, P and Mitra, AK and Chattopadhyay, K (2009) Synthesis of wurtzite-phase ZnS nanocrystal and its optical properties. In: Journal of Luminescence, 129 (11). pp. 1366-1370.

Tiwary, CS and Mahapatra, Roy D and Chattopadhyay, K (2012) Effect of length scale on mechanical properties of Al-Cu eutectic alloy. In: APPLIED PHYSICS LETTERS, 101 (17).

Tiwary, CS and Mudakavi, Rajeev J and Kishore, Sharan and Kashyap, Sanjay and Elumalai, Rajasegaran and Chakravortty, Dipshikha and Raichur, Ashok M and Chattopadhyay, K (2016) Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents. In: RSC ADVANCES, 6 (115). pp. 114344-114352.

Tiwary, CS and Pandey, P and Sarkar, S and Das, R and Samal, S and Biswas, K and Chattopadhyay, K (2022) Five decades of research on the development of eutectic as engineering materials. In: Progress in Materials Science, 123 .

Tiwary, CS and Saha, S and Kumbhakar, P and Chattopadhyay, K (2014) Observation of Combined Effect of Temperature and Pressure on Cubic to Hexagonal Phase Transformation in ZnS at the Nanoscale. In: CRYSTAL GROWTH & DESIGN, 14 (9). pp. 4240-4246.

Tiwary, CS and Verma, Akash and Biswas, Krishanu and Mondal, Amit K and Chattopadhyay, Kamanio (2011) Preparation of ultrafine CsCl crystallites by combined cryogenic and room temperature ball milling. In: Ceramics International, 37 (8). pp. 3677-3686.

Tiwary, CS and Vishnu, D and Kole, AK and Brahmanandam, J and Mahapatra, DR and Kumbhakar, P and Chattopadhyay, K (2016) Stabilization of the high-temperature and high-pressure cubic phase of ZnO by temperature-controlled milling. In: JOURNAL OF MATERIALS SCIENCE, 51 (1). pp. 126-137.

Tiwary, Chandra Sekhar and Bhowmick, Somnath and Prakash, Abhinav and Chakrabarti, Ramananda and Biswas, Krishanu and Chattopadhyay, Kamanio (2017) Ferromagnetism in alpha-Mn nanorods. In: JOURNAL OF APPLIED PHYSICS, 121 (8).

Tiwary, Chandra Sekhar and Kashiwar, Ankush and Bhowmick, Sanjit and Kumar, KC Hari and Chattopadhyay, Kamanio and Banerjee, Dipankar (2018) Engineering an ultrafine intermetallic eutectic ternary alloy for high strength and high temperature applications. In: SCRIPTA MATERIALIA, 157 . pp. 67-71.

Tiwary, Chandra Sekhar and Paliwal, Manas and Kashyap, Sanjay and Pandey, Praful and Sarkar, Suman and Kundu, Ipshita and Bhaskar, Shakti and Jung, In Ho and Chattopadhyay, K and Banerjee, Dipankar (2020) Microstructures and mechanical properties of ternary Ti-Si-Sn alloys. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 770 .

Tiwary, Chandra Sekhar and Srivastava, Chandan and Kumbhakar, Pathik (2011) Onset of sphalerite to wurtzite transformation in ZnS nanoparticles. In: Journal of Applied Physics, 110 (3).

Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.

Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.

Tiwary, Chandrasekhar and Gunjal, Vilas V. and Banerjee, Dipankar and Chattopadhyay, Kamanio (2015) Intermetallic eutectic alloys in the Ni-Al-Zr system with attractive high temperature properties. In: 2nd European Symposium on Superalloys and their Applications, MAY 12-16, 2014, Giens, FRANCE.

Tomar, Gaurav and Sharma, Ashutosh and Shenoy, Vijay B and Biswas, Gautam (2007) Surface instability of confined elastic bilayers: Theory and simulations. In: Physical Review E - Statistical, Nonlinear and Soft Matter Physics, 76 (1). 011607- 011614.

Topolov, Vitaly Yu and Brajesh, Kumar and Ranjan, Rajeev (2016) Composition driven ferroelectric transformations in lead-free Ba(Ti1-xCex)O-3 (0.02 <= x <= 0.10). In: MATERIALS CHEMISTRY AND PHYSICS, 179 . pp. 152-159.

Topolov, Vitaly Yu and Brajesh, Kumar and Ranjan, Rajeev and Panich, Anatoly E (2017) Plausible domain configurations and phase contents in two- and three-phase BaTiO3-based lead-free ferroelectrics. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 50 (6).

Topolov, Vitaly Yu and Rao, Badari Narayana and Garg, Rohini and Ranjan, Rajeev (2015) Interrelationship between Interphase Boundaries and Phase Contents near the Critical Compositions of Lead-Free Ferroelectric (Na0.5Bi0.5)TiO3-BaTiO3. In: FERROELECTRICS, 482 (1). pp. 22-33.

Topolov, VitalyYu and Kalyani, Ajay Kumar and Brajesh, Kumar and Ranjan, Rajeev and Panich, Anatoly E (2017) Comparative study on heterophase structures in ferroelectric solid solutions based on barium titanate. In: CRYSTAL RESEARCH AND TECHNOLOGY, 52 (4).

Torre, LS and Abraham, AR and Rawat, NK and Haghi, AK (2024) Sustainable environment and health: Practical strategies. Apple Academic Press, pp. 1-252. ISBN 978-1774916506

Toth, Laszlo S and Chen, Cai and Pougis, Arnaud and Arzaghi, Mandana and Fundenberger, Jean-Jacques and Massion, Roxane and Suwas, Satyam (2019) High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review. In: MATERIALS TRANSACTIONS, 60 (7). pp. 1177-1191.

Tripathi, A and Chandrasekaran, N and Raichur, AM and Mukherjee, A (2009) Antibacterial Applications of Silver Nanoparticles Synthesized by Aqueous Extract of Azadirachta Indica (Neem) Leaves. In: Journal Of Biomedical Nanotechnology, 5 (1). pp. 93-98.

Tripathi, M and Padmanabhan, S and Prakash, J and Raichur, AM (2023) Seed-Mediated Galvanic Synthesis of CuS-Au Nanohybrids for Photo-Theranostic Applications. In: ACS Applied Nano Materials, 6 (16). 14861 -14875.

Tripathi, S and Supriya, H and Bose, S (2023) A designer Schiff based motif offered dual dynamic exchangeable bonds, faster curing and closed-loop circularity in epoxy vitrimers. In: SPE Polymers .

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Dispersibility of Barium Titanate Suspension in the Presence of Polyelectrolytes: A Review. In: Journal of Dispersion Science and Technology, 29 (2). pp. 230-239.

Tripathy, A and Raichur, Ashok M and Chandrasekaran, N and Prathna, TC and Mukherjee, Amitava (2010) Process variables in biomimetic synthesis of silver nanoparticles by aqueous extract of Azadirachta indica (Neem) leaves. In: Journal of Nanoparticle Research, 12 (1). pp. 237-246.

Tripathy, Abinash and Pahal, Suman and Mudakavi, Rajeev J and Raichur, Ashok M and Varma, Manoj M and Sen, Prosenjit (2018) Impact of Bioinspired Nanotopography on the Antibacterial and Antibiofilm Efficacy of Chitosan. In: BIOMACROMOLECULES, 19 (4). pp. 1340-1346.

Tripathy, Jasaswini and Raichur, Ashok M (2012) LbL-coated microcapsules as systems for encapsulation of optical brightening agent. In: JOURNAL OF APPLIED POLYMER SCIENCE, 127 (3). pp. 1609-1614.

Tripathy, Jasaswini and Raichur, Ashok M (2012) Designing carboxymethyl cellulose based layer-by-layer capsules as a carrier for protein delivery. In: Colloids and Surfaces B: Biointerfaces, 101 . pp. 487-492.

Tripathy, SS and Raichur, AM (2006) Mechanism of fluoride adsorption on to manganese dioxide coated activated alumina. In: Proceedings of Symposium on Emerging Trends in Separation Science and Technology SESTEC-2006, SEP 2006, Mumbai.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Abatement of fluoride from water using manganese dioxide-coated activated alumina. In: Journal of Hazardous Materials, 153 (3). pp. 1043-1051.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2011) Dissolution properties of BaTiO3 nanoparticles in aqueous suspensions. In: Journal of Experimental Nanoscience, 6 (2). pp. 127-137.

Tripathy, Sushree Swarupa and Raichur, Ashok M (2008) Enhanced adsorption capacity of activated alumina by impregnation with alum for removal of As(V) from water. In: Chemical Engineering Journal, 138 (1-3). pp. 179-186.

Trojanova, Zuzanka and Dash, Khushbu and Mathis, Kristian and Lukac, Pavel and Kasakewitsch, Alla (2018) Elastic and Plastic Behavior of an Ultrafine-Grained Mg Reinforced with BN Nanoparticles. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (6, SI). pp. 3112-3121.

Tsai, AP and Chandrasekhar, N and Chattopadhyay, K (1999) Size effect on the superconducting transition of embedded lead particles in an Al-Cu-V amorphous matrix. In: Applied Physics Letters, 75 (11). pp. 1527-1528.

Tsounis, C and Kumar, PV and Masood, H and Kulkarni, RP and Gautam, GS and Müller, CR and Amal, R and Kuznetso, DA (2022) Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface, Stoichiometry, and Stability. In: Angewandte Chemie - International Edition .

Tumasyan, A and Adam, W and Andrejkovic, JW and Bergauer, T and Chatterjee, S and Dragicevic, M and Escalante Del Valle, A and Frühwirth, R and Jeitler, M and Krammer, N and Lechner, L and Liko, D and Mikulec, I and Paulitsch, P and Pitters, FM and Schieck, J and Schöfbeck, R and Spanring, M and Templ, S and Waltenberger, W and Wulz, C-E and Chekhovsky, V and Litomin, A and Makarenko, V and Darwish, MR and De Wolf, EA and Janssen, X and Kello, T and Lelek, A and Rejeb Sfar, H and Van Mechelen, P and Van Putte, S and Van Remortel, N and Blekman, F and Bols, ES and Dâ��Hondt, J and De Clercq, J and Delcourt, M and El Faham, H and Lowette, S and Moortgat, S and Morton, A and Müller, D and Sahasransu, AR and Tavernier, S and Van Doninck, W and Van Mulders, P and Beghin, D and Bilin, B and Clerbaux, B and De Lentdecker, G and Favart, L and Grebenyuk, A and Kalsi, AK and Lee, K and Mahdavikhorrami, M and Makarenko, I and Moureaux, L and Pétré, L and Popov, A and Postiau, N and Starling, E and Thomas, L and Vanden Bemden, M and Vander Velde, C and Vanlaer, P and Vannerom, D and Wezenbeek, L and Cornelis, T and Dobur, D and Knolle, J and Lambrecht, L and Mestdach, G and Niedziela, M and Roskas, C and Samalan, A and Skovpen, K and Tran, TT and Tytgat, M and Verbeke, W and Vermassen, B and Vit, M and Bethani, A and Bruno, G and Bury, F and Caputo, C and David, P and Delaere, C and Donertas, IS and Giammanco, A and Jaffel, K and Lemaitre, V and Mondal, K and Prisciandaro, J and Taliercio, A and Teklishyn, M and Vischia, P and Wertz, S and Wuyckens, S and Alves, GA and Hensel, C and Moraes, A and Aldá Júnior, WL and Alves Gallo Pereira, M and Barroso Ferreira Filho, M and Brandao Malbouisson, H and Carvalho, W and Chinellato, J and Da Costa, EM and Da Silveira, GG and De Jesus Damiao, D and Fonseca De Souza, S and Matos Figueiredo, D and Mora Herrera, C and Mota Amarilo, K and Mundim, L and Nogima, H and Rebello Teles, P and Santoro, A and Silva Do Amaral, SM and Sznajder, A and Thiel, M and Torres Da Silva De Araujo, F and Vilela Pereira, A and Bernardes, CA and Calligaris, L and Fernandez Perez Tomei, TR and Gregores, EM and Lemos, DS and Mercadante, PG and Novaes, SF and Padula, SS and Aleksandrov, A and Antchev, G and Hadjiiska, R and Iaydjiev, P and Misheva, M and Rodozov, M and Shopova, M and Sultanov, G and Dimitrov, A and Ivanov, T and Litov, L and Pavlov, B and Petkov, P and Petrov, A and Cheng, T and Fang, W and Guo, Q and Javaid, T and Mittal, M and Wang, H and Yuan, L and Ahmad, M and Bauer, G and Dozen, C and Hu, Z and Martins, J and Wang, Y and Yi, K and Chapon, E and Chen, GM and Chen, HS and Chen, M and Iemmi, F and Kapoor, A and Leggat, D and Liao, H and Liu, Z-A and Monti, F and Sharma, R and Tao, J and Thomas-wilsker, J and Wang, J and Zhang, H and Zhang, S and Zhao, J and Agapitos, A and Ban, Y and Chen, C and Huang, Q and Levin, A and Li, Q and Lu, M and Lyu, X and Mao, Y and Qian, SJ and Wang, D and Wang, Q and Xiao, J and You, Z and Gao, X and Okawa, H and Xiao, M and Avila, C and Cabrera, A and Florez, C and Fraga, J and Sarkar, A and Segura Delgado, MA and Mejia Guisao, J and Ramirez, F and Ruiz Alvarez, JD and Salazar González, CA and Giljanovic, D and Godinovic, N and Lelas, D and Puljak, I and Antunovic, Z and Kovac, M and Sculac, T and Brigljevic, V and Ferencek, D and Majumder, D and Roguljic, M and Starodumov, A and Susa, T and Attikis, A and Erodotou, E and Ioannou, A and Kole, G and Kolosova, M and Konstantinou, S and Mousa, J and Nicolaou, C and Ptochos, F and Razis, PA and Rykaczewski, H and Saka, H and Finger, M and Finger, Jr and Kveton, A and Ayala, E and Carrera Jarrin, E and Abdelalim, AA and Khalil, S and Lotfy, A and Mahmoud, MA and Bhowmik, S and Carvalho Antunes De Oliveira, A and Dewanjee, RK and Ehataht, K and Kadastik, M and Pata, J and Raidal, M and Veelken, C and Eerola, P and Forthomme, L and Kirschenmann, H and Osterberg, K and Voutilainen, M and Bharthuar, S and Brücken, E and Garcia, F and Havukainen, J and Kim, MS and Kinnunen, R and Lampén, T and Lassila-Perini, K and Lehti, S and Lindén, T and Lotti, M and Martikainen, L and Ott, J and Siikonen, H and Tuominen, E and Tuominiemi, J and Luukka, P and Petrow, H and Tuuva, T and Amendola, C and Besancon, M and Couderc, F and Dejardin, M and Denegri, D and Faure, JL and Ferri, F and Ganjour, S and Givernaud, A and Gras, P and Hamel de Monchenault, G and Jarry, P and Lenzi, B and Locci, E and Malcles, J and Rander, J and Rosowsky, A and Sahin, MÃ� and Savoy-Navarro, A and Titov, M and Yu, GB and Ahuja, S and Beaudette, F and Bonanomi, M and Buchot Perraguin, A and Busson, P and Cappati, A and Charlot, C and Davignon, O and Diab, B and Falmagne, G and Ghosh, S and Granier de Cassagnac, R and Hakimi, A and Kucher, I and Nguyen, M and Ochando, C and Paganini, P and Rembser, J and Salerno, R and Sauvan, JB and Sirois, Y and Zabi, A and Zghiche, A and Agram, J-L and Andrea, J and Apparu, D and Bloch, D and Bourgatte, G and Brom, J-M and Chabert, EC and Collard, C and Darej, D and Fontaine, J-C and Goerlach, U and Grimault, C and Le Bihan, A-C and Nibigira, E and Van Hove, P and Asilar, E and Beauceron, S and Bernet, C and Boudoul, G and Camen, C and Carle, A and Chanon, N and Contardo, D and Depasse, P and El Mamouni, H and Fay, J and Gascon, S and Gouzevitch, M and Ille, B and Jain, S and Laktineh, IB and Lattaud, H and Lesauvage, A and Lethuillier, M and Mirabito, L and Shchablo, K and Torterotot, L and Touquet, G and Vander Donckt, M and Viret, S and Khvedelidze, A and Lomidze, I and Tsamalaidze, Z and Feld, L and Klein, K and Lipinski, M and Meuser, D and Pauls, A and Rauch, MP and Röwert, N and Schulz, J and Teroerde, M and Eliseev, D and Erdmann, M and Fackeldey, P and Fischer, B and Ghosh, S and Hebbeker, T and Hoepfner, K and Ivone, F and Keller, H and Mastrolorenzo, L and Merschmeyer, M and Meyer, A and Mocellin, G and Mondal, S and Mukherjee, S and Noll, D and Novak, A and Pook, T and Pozdnyakov, A and Rath, Y and Reithler, H and Roemer, J and Schmidt, A and Schuler, SC and Sharma, A and Wiedenbeck, S and Zaleski, S and Dziwok, C and Flügge, G and Haj Ahmad, W and Hlushchenko, O and Kress, T and Nowack, A and Pistone, C and Pooth, O and Roy, D and Sert, H and Stahl, A and Ziemons, T and Aarup Petersen, H and Aldaya Martin, M and Asmuss, P and Babounikau, I and Baxter, S and Behnke, O and Bermúdez Martínez, A and Bin Anuar, AA and Borras, K and Botta, V and Brunner, D and Campbell, A and Cardini, A and Cheng, C and Consuegra Rodríguez, S and Correia Silva, G and Danilov, V and Didukh, L and Eckerlin, G and Eckstein, D and Estevez Banos, LI and Filatov, O and Gallo, E and Geiser, A and Giraldi, A and Grohsjean, A and Guthoff, M and Jafari, A and Jomhari, NZ and Jung, H and Kasem, A and Kasemann, M and Kaveh, H and Kleinwort, C and Krücker, D and Lange, W and Lidrych, J and Lipka, K and Lohmann, W and Mankel, R and Melzer-Pellmann, I-A and Metwally, J and Meyer, AB and Meyer, M and Mnich, J and Mussgiller, A and Otarid, Y and Pérez Adán, D and Pitzl, D and Raspereza, A and Ribeiro Lopes, B and Rübenach, J and Saggio, A and Saibel, A and Savitskyi, M and Scheurer, V and Schwanenberger, C and Singh, A and Sosa Ricardo, RE and Stafford, D and Tonon, N and Turkot, O and Van De Klundert, M and Walsh, R and Walter, D and Wen, Y and Wichmann, K and Wissing, C and Wuchterl, S and Aggleton, R and Bein, S and Benato, L and Benecke, A and Connor, P and De Leo, K and Eich, M and Feindt, F and Fröhlich, A and Garbers, C and Garutti, E and Gunnellini, P and Haller, J and Hinzmann, A and Kasieczka, G and Klanner, R and Kogler, R and Kramer, T and Kutzner, V and Lange, J and Lange, T and Lobanov, A and Malara, A and Nigamova, A and Pena Rodriguez, KJ and Rieger, O and Schleper, P and Schröder, M and Schwandt, J and Schwarz, D and Sonneveld, J and Stadie, H and Steinbrück, G and Tews, A and Vormwald, B and Zoi, I and Bechtel, J and Berger, T and Butz, E and Caspart, R and Chwalek, T and De Boer, W and Dierlamm, A and Droll, A and El Morabit, K and Faltermann, N and Giffels, M and Gosewisch, J and Gottmann, A and Hartmann, F and Heidecker, C and Husemann, U and Katkov, I and Keicher, P and Koppenhöfer, R and Maier, S and Metzler, M and Mitra, S and Müller, T and Neukum, M and Nürnberg, A and Quast, G and Rabbertz, K and Rauser, J and Savoiu, D and Schnepf, M and Seith, D and Shvetsov, I and Simonis, HJ and Ulrich, R and Van Der Linden, J and Von Cube, RF and Wassmer, M and Weber, M and Wieland, S and Wolf, R and Wozniewski, S and Wunsch, S and Anagnostou, G and Asenov, P and Daskalakis, G and Geralis, T and Kyriakis, A and Loukas, D and Stakia, A and Diamantopoulou, M and Karasavvas, D and Karathanasis, G and Kontaxakis, P and Koraka, CK and Manousakis-katsikakis, A and Panagiotou, A and Papavergou, I and Saoulidou, N and Theofilatos, K and Tziaferi, E and Vellidis, K and Vourliotis, E and Bakas, G and Kousouris, K and Papakrivopoulos, I and Tsipolitis, G and Zacharopoulou, A and Evangelou, I and Foudas, C and Gianneios, P and Katsoulis, P and Kokkas, P and Manthos, N and Papadopoulos, I and Strologas, J and Csanad, M and Farkas, K and Gadallah, MMA and Lökös, S and Major, P and Mandal, K and Mehta, A and Pasztor, G and Rádl, AJ and Surányi, O and Veres, GI and Bartók, M and Bencze, G and Hajdu, C and Horvath, D and Sikler, F and Veszpremi, V and Vesztergombi, G and Czellar, S and Karancsi, J and Molnar, J and Szillasi, Z and Teyssier, D and Raics, P and Trocsanyi, ZL and Ujvari, B and Csorgo, T and Nemes, F and Novak, T and Komaragiri, JR and Kumar, D and Panwar, L and Tiwari, PC and Bahinipati, S and Dash, D and Kar, C and Mal, P and Mishra, T and Muraleedharan Nair Bindhu, VK and Nayak, A and Saha, P and Sur, N and Swain, SK and Vats, D and Bansal, S and Beri, SB and Bhatnagar, V and Chaudhary, G and Chauhan, S and Dhingra, N and Gupta, R and Kaur, A and Kaur, M and Kaur, S and Kumari, P and Meena, M and Sandeep, K and Singh, JB and Virdi, AK and Ahmed, A and Bhardwaj, A and Choudhary, BC and Garg, RB and Gola, M and Keshri, S and Kumar, A and Naimuddin, M and Priyanka, P and Ranjan, K and Shah, A and Bharti, M and Bhattacharya, R and Bhattacharya, S and Bhowmik, D and Dutta, S and Dutta, S and Gomber, B and Maity, M and Nandan, S and Palit, P and Rout, PK and Saha, G and Sahu, B and Sarkar, S and Sharan, M and Singh, B and Thakur, S and Behera, PK and Behera, SC and Kalbhor, P and Muhammad, A and Pradhan, R and Pujahari, PR and Sharma, A and Sikdar, AK and Dutta, D and Jha, V and Kumar, V and Mishra, DK and Naskar, K and Netrakanti, PK and Pant, LM and Shukla, P and Aziz, T and Dugad, S and Kumar, M and Sarkar, U and Banerjee, S and Bhattacharya, S and Chudasama, R and Guchait, M and Karmakar, S and Kumar, S and Majumder, G and Mazumdar, K and Mukherjee, S and Alpana, K and Dube, S and Kansal, B and Pandey, S and Rane, A and Rastogi, A and Sharma, S and Bakhshiansohi, H and Zeinali, M and Chenarani, S and Etesami, SM and Khakzad, M and Mohammadi Najafabadi, M and Grunewald, M and Abbrescia, M and Aly, R and Aruta, C and Colaleo, A and Creanza, D and De Filippis, N and De Palma, M and Di Florio, A and Di Pilato, A and Elmetenawee, W and Fiore, L and Gelmi, A and Gul, M and Iaselli, G and Ince, M and Lezki, S and Maggi, G and Maggi, M and Margjeka, I and Mastrapasqua, V and Merlin, JA and My, S and Nuzzo, S and Pellecchia, A and Pompili, A and Pugliese, G and Ranieri, A and Selvaggi, G and Silvestris, L and Simone, FM and Venditti, R and Verwilligen, P and Abbiendi, G and Battilana, C and Bonacorsi, D and Borgonovi, L and Brigliadori, L and Campanini, R and Capiluppi, P and Castro, A and Cavallo, FR and Cuffiani, M and Dallavalle, GM and Diotalevi, T and Fabbri, F and Fanfani, A and Giacomelli, P and Giommi, L and Grandi, C and Guiducci, L and Lo Meo, S and Lunerti, L and Marcellini, S and Masetti, G and Navarria, FL and Perrotta, A and Primavera, F and Rossi, AM and Rovelli, T and Siroli, GP and Albergo, S and Costa, S and Di Mattia, A and Potenza, R and Tricomi, A and Tuve, C and Barbagli, G and Cassese, A and Ceccarelli, R and Ciulli, V and Civinini, C and Dâ��Alessandro, R and Focardi, E and Latino, G and Lenzi, P and Lizzo, M and Meschini, M and Paoletti, S and Seidita, R and Sguazzoni, G and Viliani, L and Benussi, L and Bianco, S and Piccolo, D and Bozzo, M and Ferro, F and Mulargia, R and Robutti, E and Tosi, S and Benaglia, A and Brivio, F and Cetorelli, F and Ciriolo, V and De Guio, F and Dinardo, ME and Dini, P and Gennai, S and Ghezzi, A and Govoni, P and Guzzi, L and Malberti, M and Malvezzi, S and Massironi, A and Menasce, D and Moroni, L and Paganoni, M and Pedrini, D and Ragazzi, S and Redaelli, N and Tabarelli de Fatis, T and Valsecchi, D and Zuolo, D and Buontempo, S and Carnevali, F and Cavallo, N and De Iorio, A and Fabozzi, F and Iorio, AOM and Lista, L and Meola, S and Paolucci, P and Rossi, B and Sciacca, C and Azzi, P and Bacchetta, N and Bisello, D and Bortignon, P and Bragagnolo, A and Carlin, R and Checchia, P and De Castro Manzano, P and Dorigo, T and Dosselli, U and Gasparini, F and Gasparini, U and Hoh, SY and Layer, L and Margoni, M and Meneguzzo, AT and Pazzini, J and Presilla, M and Ronchese, P and Rossin, R and Simonetto, F and Strong, G and Tosi, M and Yarar, H and Zanetti, M and Zotto, P and Zucchetta, A and Zumerle, G and Aime, C and Braghieri, A and Calzaferri, S and Fiorina, D and Montagna, P and Ratti, SP and Re, V and Ressegotti, M and Riccardi, C and Salvini, P and Vai, I and Vitulo, P and Bilei, GM and Ciangottini, D and Fanò, L and Lariccia, P and Magherini, M and Mantovani, G and Mariani, V and Menichelli, M and Moscatelli, F and Piccinelli, A and Rossi, A and Santocchia, A and Spiga, D and Tedeschi, T and Azzurri, P and Bagliesi, G and Bertacchi, V and Bianchini, L and Boccali, T and Bossini, E and Castaldi, R and Ciocci, MA and Dellâ��Orso, R and Di Domenico, MR and Donato, S and Giassi, A and Grippo, MT and Ligabue, F and Manca, E and Mandorli, G and Messineo, A and Palla, F and Parolia, S and Ramirez-Sanchez, G and Rizzi, A and Rolandi, G and Roy Chowdhury, S and Scribano, A and Shafiei, N and Spagnolo, P and Tenchini, R and Tonelli, G and Turini, N and Venturi, A and Verdini, PG and Campana, M and Cavallari, F and Cipriani, M and Del Re, D and Di Marco, E and Diemoz, M and Longo, E and Meridiani, P and Organtini, G and Pandolfi, F and Paramatti, R and Quaranta, C and Rahatlou, S and Rovelli, C and Santanastasio, F and Soffi, L and Tramontano, R and Amapane, N and Arcidiacono, R and Argiro, S and Arneodo, M and Bartosik, N and Bellan, R and Bellora, A and Berenguer Antequera, J and Biino, C and Cartiglia, N and Cometti, S and Costa, M and Covarelli, R and Demaria, N and Kiani, B and Legger, F and Mariotti, C and Maselli, S and Migliore, E and Monteil, E and Monteno, M and Obertino, MM and Ortona, G and Pacher, L and Pastrone, N and Pelliccioni, M and Pinna Angioni, GL and Ruspa, M and Salvatico, R and Shchelina, K and Siviero, F and Sola, V and Solano, A and Soldi, D and Staiano, A and Tornago, M and Trocino, D and Vagnerini, A and Belforte, S and Candelise, V and Casarsa, M and Cossutti, F and Da Rold, A and Della Ricca, G and Sorrentino, G and Vazzoler, F and Dogra, S and Huh, C and Kim, B and Kim, DH and Kim, GN and Kim, J and Lee, J and Lee, SW and Moon, CS and Oh, YD and Pak, SI and Radburn-Smith, BC and Sekmen, S and Yang, YC and Kim, H and Moon, DH and Francois, B and Kim, TJ and Park, J and Cho, S and Choi, S and Go, Y and Hong, B and Lee, K and Lee, KS and Lim, J and Park, J and Park, SK and Yoo, J and Goh, J and Gurtu, A and Kim, HS and Kim, Y and Almond, J and Bhyun, JH and Choi, J and Jeon, S and Kim, J and Kim, JS and Ko, S and Kwon, H and Lee, H and Lee, S and Oh, BH and Oh, M and Oh, SB and Seo, H and Yang, UK and Yoon, I and Jang, W and Jeon, D and Kang, DY and Kang, Y and Kim, JH and Kim, S and Ko, B and Lee, JSH and Lee, Y and Park, IC and Roh, Y and Song, D and Watson, IJ and Yang, S and Ha, S and Yoo, HD and Jeong, Y and Lee, H and Lee, Y and Yu, I and Beyrouthy, T and Maghrbi, Y and Torims, T and Veckalns, V and Ambrozas, M and Juodagalvis, A and Rinkevicius, A and Tamulaitis, G and Vaitkevicius, A and Bin Norjoharuddeen, N and Wan Abdullah, WAT and Yusli, MN and Zolkapli, Z and Benitez, JF and Castaneda Hernandez, A and León Coello, M and Murillo Quijada, JA and Sehrawat, A and Valencia Palomo, L and Ayala, G and Castilla-Valdez, H and Heredia-De La Cruz, I and Lopez-Fernandez, R and Mondragon Herrera, CA and Perez Navarro, DA and Sanchez-Hernandez, A and Carrillo Moreno, S and Oropeza Barrera, C and Ramirez-Garcia, M and Vazquez Valencia, F and Pedraza, I and Salazar Ibarguen, HA and Uribe Estrada, C and Mijuskovic, J and Raicevic, N and Krofcheck, D and Bheesette, S and Butler, PH and Ahmad, A and Asghar, MI and Awais, A and Awan, MIM and Hoorani, HR and Khan, WA and Shah, MA and Shoaib, M and Waqas, M and Avati, V and Grzanka, L and Malawski, M and Bialkowska, H and Bluj, M and Boimska, B and Górski, M and Kazana, M and Szleper, M and Zalewski, P and Bunkowski, K and Doroba, K and Kalinowski, A and Konecki, M and Krolikowski, J and Walczak, M and Araujo, M and Bargassa, P and Bastos, D and Boletti, A and Faccioli, P and Gallinaro, M and Hollar, J and Leonardo, N and Niknejad, T and Pisano, M and Seixas, J and Toldaiev, O and Varela, J and Afanasiev, S and Budkouski, D and Golutvin, I and Gorbunov, I and Karjavine, V and Korenkov, V and Lanev, A and Malakhov, A and Matveev, V and Palichik, V and Perelygin, V and Savina, M and Seitova, D and Shalaev, V and Shmatov, S and Shulha, S and Smirnov, V and Teryaev, O and Voytishin, N and Yuldashev, BS and Zarubin, A and Zhizhin, I and Gavrilov, G and Golovtcov, V and Ivanov, Y and Kim, V and Kuznetsova, E and Murzin, V and Oreshkin, V and Smirnov, I and Sosnov, D and Sulimov, V and Uvarov, L and Volkov, S and Vorobyev, A and Andreev, Y and Dermenev, A and Gninenko, S and Golubev, N and Karneyeu, A and Kirpichnikov, D and Kirsanov, M and Krasnikov, N and Pashenkov, A and Pivovarov, G and Tlisov, D and Toropin, A and Epshteyn, V and Gavrilov, V and Lychkovskaya, N and Nikitenko, A and Popov, V and Spiridonov, A and Stepennov, A and Toms, M and Vlasov, E and Zhokin, A and Aushev, T and Chadeeva, M and Oskin, A and Parygin, P and Popova, E and Zhemchugov, E and Andreev, V and Azarkin, M and Dremin, I and Kirakosyan, M and Terkulov, A and Belyaev, A and Boos, E and Bunichev, V and Dubinin, M and Dudko, L and Gribushin, A and Klyukhin, V and Kodolova, O and Lokhtin, I and Obraztsov, S and Perfilov, M and Petrushanko, S and Savrin, V and Blinov, V and Dimova, T and Kardapoltsev, L and Kozyrev, A and Ovtin, I and Skovpen, Y and Azhgirey, I and Bayshev, I and Elumakhov, D and Kachanov, V and Konstantinov, D and Mandrik, P and Petrov, V and Ryutin, R and Slabospitskii, S and Sobol, A and Troshin, S and Tyurin, N and Uzunian, A and Volkov, A and Babaev, A and Okhotnikov, V and Borchsh, V and Ivanchenko, V and Tcherniaev, E and Adzic, P and Dordevic, M and Milenovic, P and Milosevic, J and Milosevic, V and Aguilar-Benitez, M and Alcaraz Maestre, J and Ã�lvarez Fernández, A and Bachiller, I and Barrio Luna, M and Bedoya, CF and Carrillo Montoya, CA and Cepeda, M and Cerrada, M and Colino, N and De La Cruz, B and Delgado Peris, A and Fernández Ramos, JP and Flix, J and Fouz, MC and Gonzalez Lopez, O and Goy Lopez, S and Hernandez, JM and Josa, MI and León Holgado, J and Moran, D and Navarro Tobar, Ã� and Pérez-Calero Yzquierdo, A and Puerta Pelayo, J and Redondo, I and Romero, L and Sánchez Navas, S and Urda Gómez, L and Willmott, C and de Trocóniz, JF and Reyes-Almanza, R and Alvarez Gonzalez, B and Cuevas, J and Erice, C and Fernandez Menendez, J and Folgueras, S and Gonzalez Caballero, I and Palencia Cortezon, E and Ramón Ã�lvarez, C and Ripoll Sau, J and Rodríguez Bouza, V and Trapote, A and Trevisani, N and Brochero Cifuentes, JA and Cabrillo, IJ and Calderon, A and Chazin Quero, B and Duarte Campderros, J and Fernandez, M and Fernandez Madrazo, C and Fernández Manteca, PJ and García Alonso, A and Gomez, G and Martinez Rivero, C and Martinez Ruiz del Arbol, P and Matorras, F and Matorras Cuevas, P and Piedra Gomez, J and Prieels, C and Rodrigo, T and Ruiz-Jimeno, A and Scodellaro, L and Vila, I and Vizan Garcia, JM and Jayananda, M and Kailasapathy, B and Sonnadara, DUJ and Wickramarathna, D and Dharmaratna, WGD and Liyanage, K and Perera, N and Wickramage, N and Aarrestad, TK and Abbaneo, D and Alimena, J and Auffray, E and Auzinger, G and Baechler, J and Baillon, P and Barney, D and Bendavid, J and Bianco, M and Bocci, A and Camporesi, T and Capeans Garrido, M and Cerminara, G and Chhibra, SS and Cristella, L and dâ��Enterria, D and Dabrowski, A and Daci, N and David, A and De Roeck, A and Defranchis, MM and Deile, M and Dobson, M and Dünser, M and Dupont, N and Elliott-Peisert, A and Emriskova, N and Fallavollita, F and Fasanella, D and Fiorendi, S and Florent, A and Franzoni, G and Funk, W and Giani, S and Gigi, D and Gill, K and Glege, F and Gouskos, L and Haranko, M and Hegeman, J and Iiyama, Y and Innocente, V and James, T and Janot, P and Kaspar, J and Kieseler, J and Komm, M and Kratochwil, N and Lange, C and Laurila, S and Lecoq, P and Long, K and Lourenço, C and Malgeri, L and Mallios, S and Mannelli, M and Marini, AC and Meijers, F and Mersi, S and Meschi, E and Moortgat, F and Mulders, M and Orfanelli, S and Orsini, L and Pantaleo, F and Pape, L and Perez, E and Peruzzi, M and Petrilli, A and Petrucciani, G and Pfeiffer, A and Pierini, M and Piparo, D and Pitt, M and Qu, H and Quast, T and Rabady, D and Racz, A and Rieger, M and Rovere, M and Sakulin, H and Salfeld-Nebgen, J and Scarfi, S and Schäfer, C and Schwick, C and Selvaggi, M and Sharma, A and Silva, P and Snoeys, W and Sphicas, P and Summers, S and Tavolaro, VR and Treille, D and Tsirou, A and Van Onsem, GP and Verzetti, M and Wanczyk, J and Wozniak, KA and Zeuner, WD and Caminada, L and Ebrahimi, A and Erdmann, W and Horisberger, R and Ingram, Q and Kaestli, HC and Kotlinski, D and Langenegger, U and Missiroli, M and Rohe, T and Androsov, K and Backhaus, M and Berger, P and Calandri, A and Chernyavskaya, N and De Cosa, A and Dissertori, G and Dittmar, M and DonegÃ, M and Dorfer, C and Eble, F and Gómez Espinosa, TA and Grab, C and Hits, D and Lustermann, W and Lyon, A-M and Manzoni, RA and Martin Perez, C and Meinhard, MT and Micheli, F and Nessi-Tedaldi, F and Niedziela, J and Pauss, F and Perovic, V and Perrin, G and Pigazzini, S and Ratti, MG and Reichmann, M and Reissel, C and Reitenspiess, T and Ristic, B and Ruini, D and Sanz Becerra, DA and Schönenberger, M and Stampf, V and Steggemann, J and Wallny, R and Zhu, DH and Amsler, C and Bärtschi, P and Botta, C and Brzhechko, D and Canelli, MF and Cormier, K and De Wit, A and Del Burgo, R and Heikkilä, JK and Huwiler, M and Jofrehei, A and Kilminster, B and Leontsinis, S and Macchiolo, A and Meiring, P and Mikuni, VM and Molinatti, U and Neutelings, I and Rauco, G and Reimers, A and Robmann, P and Sanchez Cruz, S and Schweiger, K and Takahashi, Y and Adloff, C and Kuo, CM and Lin, W and Roy, A and Sarkar, T and Yu, SS and Ceard, L and Chao, Y and Chen, KF and Chen, PH and Hou, W-S and Li, Y and Lu, R-S and Paganis, E and Psallidas, A and Steen, A and Yazgan, E and Yu, P and Asavapibhop, B and Asawatangtrakuldee, C and Srimanobhas, N and Boran, F and Damarseckin, S and Demiroglu, ZS and Dolek, F and Dumanoglu, I and Eskut, E and Guler, Y and Gurpinar Guler, E and Hos, I and Isik, C and Kara, O and Kayis Topaksu, A and Kiminsu, U and Onengut, G and Ozdemir, K and Polatoz, A and Simsek, AE and Tali, B and Tok, UG and Turkcapar, S and Zorbakir, IS and Zorbilmez, C and Isildak, B and Karapinar, G and Ocalan, K and Yalvac, M and Akgun, B and Atakisi, IO and Gülmez, E and Kaya, M and Kaya, O and Ã�zçelik, Ã� and Tekten, S and Yetkin, EA and Cakir, A and Cankocak, K and Komurcu, Y and Sen, S and Cerci, S and Kaynak, B and Ozkorucuklu, S and Sunar Cerci, D and Grynyov, B and Levchuk, L and Anthony, D and Bhal, E and Bologna, S and Brooke, JJ and Bundock, A and Clement, E and Cussans, D and Flacher, H and Goldstein, J and Heath, GP and Heath, HF and Kreczko, L and Krikler, B and Paramesvaran, S and Seif El Nasr-Storey, S and Smith, VJ and Stylianou, N and White, R and Bell, KW and Belyaev, A and Brew, C and Brown, RM and Cockerill, DJA and Ellis, KV and Harder, K and Harper, S and Linacre, J and Manolopoulos, K and Newbold, DM and Olaiya, E and Petyt, D and Reis, T and Schuh, T and Shepherd-Themistocleous, CH and Tomalin, IR and Williams, T and Bainbridge, R and Bloch, P and Bonomally, S and Borg, J and Breeze, S and Buchmuller, O and Cepaitis, V and Chahal, GS and Colling, D and Dauncey, P and Davies, G and Della Negra, M and Fayer, S and Fedi, G and Hall, G and Hassanshahi, MH and Iles, G and Langford, J and Lyons, L and Magnan, A-M and Malik, S and Martelli, A and Nash, J and Pesaresi, M and Raymond, DM and Richards, A and Rose, A and Scott, E and Seez, C and Shtipliyski, A and Tapper, A and Uchida, K and Virdee, T and Wardle, N and Webb, SN and Winterbottom, D and Zecchinelli, AG and Coldham, K and Cole, JE and Khan, A and Kyberd, P and Reid, ID and Teodorescu, L and Zahid, S and Abdullin, S and Brinkerhoff, A and Caraway, B and Dittmann, J and Hatakeyama, K and Kanuganti, AR and McMaster, B and Pastika, N and Sawant, S and Smith, C and Sutantawibul, C and Wilson, J and Bartek, R and Dominguez, A and Uniyal, R and Vargas Hernandez, AM and Buccilli, A and Cooper, SI and Di Croce, D and Gleyzer, SV and Henderson, C and Perez, CU and Rumerio, P and West, C and Akpinar, A and Albert, A and Arcaro, D and Cosby, C and Demiragli, Z and Fontanesi, E and Gastler, D and Rohlf, J and Salyer, K and Sperka, D and Spitzbart, D and Suarez, I and Tsatsos, A and Yuan, S and Zou, D and Benelli, G and Burkle, B and Coubez, X and Cutts, D and Duh, Y and Hadley, M and Heintz, U and Hogan, JM and Landsberg, G and Lau, KT and Lee, J and Lukasik, M and Luo, J and Narain, M and Sagir, S and Usai, E and Wong, WY and Yan, X and Yu, D and Zhang, W and Bonilla, J and Brainerd, C and Breedon, R and Calderon De La Barca Sanchez, M and Chertok, M and Conway, J and Cox, PT and Erbacher, R and Haza, G and Jensen, F and Kukral, O and Lander, R and Mulhearn, M and Pellett, D and Regnery, B and Taylor, D and Yao, Y and Zhang, F and Bachtis, M and Cousins, R and Datta, A and Hamilton, D and Hauser, J and Ignatenko, M and Iqbal, MA and Lam, T and Mccoll, N and Nash, WA and Regnard, S and Saltzberg, D and Stone, B and Valuev, V and Burt, K and Chen, Y and Clare, R and Gary, JW and Gordon, M and Hanson, G and Karapostoli, G and Long, OR and Manganelli, N and Olmedo Negrete, M and Si, W and Wimpenny, S and Zhang, Y and Branson, JG and Chang, P and Cittolin, S and Cooperstein, S and Deelen, N and Duarte, J and Gerosa, R and Giannini, L and Gilbert, D and Guiang, J and Kansal, R and Krutelyov, V and Lee, R and Letts, J and Masciovecchio, M and May, S and Pieri, M and Sathia Narayanan, BV and Sharma, V and Tadel, M and Vartak, A and Würthwein, F and Xiang, Y and Yagil, A and Amin, N and Campagnari, C and Citron, M and Dorsett, A and Dutta, V and Incandela, J and Kilpatrick, M and Kim, J and Marsh, B and Mei, H and Oshiro, M and Quinnan, M and Richman, J and Sarica, U and Stuart, D and Wang, S and Bornheim, A and Cerri, O and Dutta, I and Lawhorn, JM and Lu, N and Mao, J and Newman, HB and Ngadiuba, J and Nguyen, TQ and Spiropulu, M and Vlimant, JR and Wang, C and Xie, S and Zhang, Z and Zhu, RY and Alison, J and An, S and Andrews, MB and Bryant, P and Ferguson, T and Harilal, A and Mudholkar, T and Paulini, M and Sanchez, A and Cumalat, JP and Ford, WT and MacDonald, E and Patel, R and Perloff, A and Stenson, K and Ulmer, KA and Wagner, SR and Alexander, J and Cheng, Y and Chu, J and Cranshaw, DJ and Mcdermott, K and Monroy, J and Patterson, JR and Quach, D and Reichert, J and Ryd, A and Sun, W and Tan, SM and Tao, Z and Thom, J and Wittich, P and Zientek, M and Albrow, M and Alyari, M and Apollinari, G and Apresyan, A and Apyan, A and Banerjee, S and Bauerdick, LAT and Berry, D and Berryhill, J and Bhat, PC and Burkett, K and Butler, JN and Canepa, A and Cerati, GB and Cheung, HWK and Chlebana, F and Cremonesi, M and Di Petrillo, KF and Elvira, VD and Feng, Y and Freeman, J and Gecse, Z and Gray, L and Green, D and Grünendahl, S and Gutsche, O and Harris, RM and Heller, R and Herwig, TC and Hirschauer, J and Jayatilaka, B and Jindariani, S and Johnson, M and Joshi, U and Klijnsma, T and Klima, B and Kwok, KHM and Lammel, S and Lincoln, D and Lipton, R and Liu, T and Madrid, C and Maeshima, K and Mantilla, C and Mason, D and McBride, P and Merkel, P and Mrenna, S and Nahn, S and Oâ��Dell, V and Papadimitriou, V and Pedro, K and Pena, C and Prokofyev, O and Ravera, F and Reinsvold Hall, A and Ristori, L and Schneider, B and Sexton-Kennedy, E and Smith, N and Soha, A and Spalding, WJ and Spiegel, L and Stoynev, S and Strait, J and Taylor, L and Tkaczyk, S and Tran, NV and Uplegger, L and Vaandering, EW and Weber, HA and Acosta, D and Avery, P and Bourilkov, D and Cadamuro, L and Cherepanov, V and Errico, F and Field, RD and Guerrero, D and Joshi, BM and Kim, M and Koenig, E and Konigsberg, J and Korytov, A and Lo, KH and Matchev, K and Menendez, N and Mitselmakher, G and Muthirakalayil Madhu, A and Rawal, N and Rosenzweig, D and Rosenzweig, S and Shi, K and Sturdy, J and Wang, J and Yigitbasi, E and Zuo, X and Adams, T and Askew, A and Diaz, D and Habibullah, R and Hagopian, V and Johnson, KF and Khurana, R and Kolberg, T and Martinez, G and Prosper, H and Schiber, C and Yohay, R and Zhang, J and Baarmand, MM and Butalla, S and Elkafrawy, T and Hohlmann, M and Kumar Verma, R and Noonan, D and Rahmani, M and Saunders, M and Yumiceva, F and Adams, MR and Becerril Gonzalez, H and Cavanaugh, R and Chen, X and Dittmer, S and Evdokimov, O and Gerber, CE and Hangal, DA and Hofman, DJ and Mills, C and Oh, G and Roy, T and Tonjes, MB and Varelas, N and Viinikainen, J and Wang, X and Wu, Z and Ye, Z and Alhusseini, M and Dilsiz, K and Gandrajula, RP and Köseyan, OK and Merlo, J-P and Mestvirishvili, A and Nachtman, J and Ogul, H and Onel, Y and Penzo, A and Snyder, C and Tiras, E and Amram, O and Blumenfeld, B and Corcodilos, L and Davis, J and Eminizer, M and Gritsan, AV and Kyriacou, S and Maksimovic, P and Roskes, J and Swartz, M and Vámi, TÃ� and Anguiano, J and Baldenegro Barrera, C and Baringer, P and Bean, A and Bylinkin, A and Isidori, T and Khalil, S and King, J and Krintiras, G and Kropivnitskaya, A and Lindsey, C and Minafra, N and Murray, M and Rogan, C and Royon, C and Sanders, S and Schmitz, E and Tapia Takaki, JD and Wang, Q and Williams, J and Wilson, G and Duric, S and Ivanov, A and Kaadze, K and Kim, D and Maravin, Y and Mitchell, T and Modak, A and Nam, K and Rebassoo, F and Wright, D and Adams, E and Baden, A and Baron, O and Belloni, A and Eno, SC and Hadley, NJ and Jabeen, S and Kellogg, RG and Koeth, T and Mignerey, AC and Nabili, S and Seidel, M and Skuja, A and Wang, L and Wong, K and Abercrombie, D and Andreassi, G and Bi, R and Brandt, S and Busza, W and Cali, IA and Chen, Y and Dâ��Alfonso, M and Eysermans, J and Gomez Ceballos, G and Goncharov, M and Harris, P and Hu, M and Klute, M and Kovalskyi, D and Krupa, J and Lee, Y-J and Maier, B and Mironov, C and Paus, C and Rankin, D and Roland, C and Roland, G and Shi, Z and Stephans, GSF and Tatar, K and Wang, J and Wang, Z and Wyslouch, B and Chatterjee, RM and Evans, A and Hansen, P and Hiltbrand, J and Jain, S and Krohn, M and Kubota, Y and Mans, J and Revering, M and Rusack, R and Saradhy, R and Schroeder, N and Strobbe, N and Wadud, MA and Bloom, K and Bryson, M and Chauhan, S and Claes, DR and Fangmeier, C and Finco, L and Golf, F and González Fernández, JR and Joo, C and Kravchenko, I and Musich, M and Reed, I and Siado, JE and Snow, GR and Tabb, W and Yan, F and Agarwal, G and Bandyopadhyay, H and Hay, L and Iashvili, I and Kharchilava, A and McLean, C and Nguyen, D and Pekkanen, J and Rappoccio, S and Williams, A and Alverson, G and Barberis, E and Freer, C and Haddad, Y and Hortiangtham, A and Li, J and Madigan, G and Marzocchi, B and Morse, DM and Nguyen, V and Orimoto, T and Parker, A and Skinnari, L and Tishelman-Charny, A and Wamorkar, T and Wang, B and Wisecarver, A and Wood, D and Bhattacharya, S and Bueghly, J and Chen, Z and Gilbert, A and Gunter, T and Hahn, KA and Odell, N and Schmitt, MH and Velasco, M and Band, R and Bucci, R and Dev, N and Goldouzian, R and Hildreth, M and Hurtado Anampa, K and Jessop, C and Lannon, K and Loukas, N and Marinelli, N and Mcalister, I and McCauley, T and Meng, F and Mohrman, K and Musienko, Y and Ruchti, R and Siddireddy, P and Wayne, M and Wightman, A and Wolf, M and Zarucki, M and Zygala, L and Bylsma, B and Cardwell, B and Durkin, LS and Francis, B and Hill, C and Nunez Ornelas, M and Wei, K and Winer, BL and Yates, BR and Addesa, FM and Bonham, B and Das, P and Dezoort, G and Elmer, P and Frankenthal, A and Greenberg, B and Haubrich, N and Higginbotham, S and Kalogeropoulos, A and Kopp, G and Kwan, S and Lange, D and Lucchini, MT and Marlow, D and Mei, K and Ojalvo, I and Olsen, J and Palmer, C and Stickland, D and Tully, C and Malik, S and Norberg, S and Bakshi, AS and Barnes, VE and Chawla, R and Das, S and Gutay, L and Jones, M and Jung, AW and Karmarkar, S and Liu, M and Negro, G and Neumeister, N and Paspalaki, G and Peng, CC and Piperov, S and Purohit, A and Schulte, JF and Stojanovic, M and Thieman, J and Wang, F and Xiao, R and Xie, W and Dolen, J and Parashar, N and Baty, A and Decaro, M and Dildick, S and Ecklund, KM and Freed, S and Gardner, P and Geurts, FJM and Kumar, A and Li, W and Padley, BP and Redjimi, R and Shi, W and Stahl Leiton, AG and Yang, S and Zhang, L and Zhang, Y and Bodek, A and de Barbaro, P and Demina, R and Dulemba, JL and Fallon, C and Ferbel, T and Galanti, M and Garcia-Bellido, A and Hindrichs, O and Khukhunaishvili, A and Ranken, E and Taus, R and Chiarito, B and Chou, JP and Gandrakota, A and Gershtein, Y and Halkiadakis, E and Hart, A and Heindl, M and Hughes, E and Kaplan, S and Karacheban, O and Laflotte, I and Lath, A and Montalvo, R and Nash, K and Osherson, M and Salur, S and Schnetzer, S and Somalwar, S and Stone, R and Thayil, SA and Thomas, S and Wang, H and Acharya, H and Delannoy, AG and Spanier, S and Bouhali, O and Dalchenko, M and Delgado, A and Eusebi, R and Gilmore, J and Huang, T and Kamon, T and Kim, H and Luo, S and Malhotra, S and Mueller, R and Overton, D and Rathjens, D and Safonov, A and Akchurin, N and Damgov, J and Hegde, V and Kunori, S and Lamichhane, K and Lee, SW and Mengke, T and Muthumuni, S and Peltola, T and Volobouev, I and Wang, Z and Whitbeck, A and Appelt, E and Greene, S and Gurrola, A and Johns, W and Melo, A and Ni, H and Padeken, K and Romeo, F and Sheldon, P and Tuo, S and Velkovska, J and Arenton, MW and Cox, B and Cummings, G and Hakala, J and Hirosky, R and Joyce, M and Ledovskoy, A and Li, A and Neu, C and Tannenwald, B and White, S and Wolfe, E and Poudyal, N and Thapa, P and Black, K and Bose, T and Buchanan, J and Caillol, C and Dasu, S and De Bruyn, I and Everaerts, P and Fienga, F and Galloni, C and He, H and Herndon, M and Hervé, A and Hussain, U and Lanaro, A and Loeliger, A and Loveless, R and Madhusudanan Sreekala, J and Mallampalli, A and Mohammadi, A and Pinna, D and Savin, A and Shang, V and Sharma, V and Smith, WH and Teague, D and Trembath-reichert, S and Vetens, W and The CMS collaboration, CMS (2022) Search for electroweak production of charginos and neutralinos in proton-proton collisions at √s = 13 TeV. In: Journal of High Energy Physics, 2022 (4).

Tumasyan, A and Adam, W and Bergauer, T and Dragicevic, M and Erö, J and Del Valle, AE and Frühwirth, R and Jeitler, M and Krammer, N and Lechner, L and Liko, D and Mikulec, I and Pitters, FM and Rad, N and Schieck, J and Schöfbeck, R and Spanring, M and Templ, S and Waltenberger, W and Wulz, C-E and Zarucki, M and Chekhovsky, V and Litomin, A and Makarenko, V and Gonzalez, JS and Darwish, MR and De Wolf, EA and Croce, DD and Janssen, X and Kello, T and Lelek, A and Pieters, M and Sfar, HR and Van Haevermaet, H and Van Mechelen, P and Van Putte, S and Van Remortel, N and Blekman, F and Bols, ES and Chhibra, SS and Dâ��Hondt, J and De Clercq, J and Lontkovskyi, D and Lowette, S and Marchesini, I and Moortgat, S and Morton, A and Python, Q and Tavernier, S and Van Doninck, W and Van Mulders, P and Beghin, D and Bilin, B and Clerbaux, B and De Lentdecker, G and Dorney, B and Favart, L and Grebenyuk, A and Kalsi, AK and Makarenko, I and Moureaux, L and Pétré, L and Popov, A and Postiau, N and Starling, E and Thomas, L and Velde, CV and Vanlaer, P and Vannerom, D and Wezenbeek, L and Cornelis, T and Dobur, D and Gruchala, M and Khvastunov, I and Niedziela, M and Roskas, C and Skovpen, K and Tytgat, M and Verbeke, W and Vermassen, B and Vit, M and Bruno, G and Bury, F and Caputo, C and David, P and Delaere, C and Delcourt, M and Donertas, IS and Giammanco, A and Lemaitre, V and Mondal, K and Prisciandaro, J and Taliercio, A and Teklishyn, M and Vischia, P and Wertz, S and Wuyckens, S and Alves, GA and Hensel, C and Moraes, A and Júnior, WLA and Chagas, EBBD and Malbouisson, HB and Carvalho, W and Chinellato, J and Coelho, E and Da Costa, EM and Da Silveira, GG and De JesusDamiao, D and De Souza, SF and Martins, J and Figueiredo, DM and Jaime, MM and Herrera, CM and Mundim, L and Nogima, H and Teles, PR and Rosas, LJS and Santoro, A and Amaral, SMSD and Sznajder, A and Thiel, M and Da SilvaDeAraujo, FT and Pereira, AV and Bernardes, CA and Calligaris, L and Tomei, TRFP and Gregores, EM and Lemos, DS and Mercadante, PG and Novaes, SF and Padula, SS and Aleksandrov, A and Antchev, G and Atanasov, I and Hadjiiska, R and Iaydjiev, P and Misheva, M and Rodozov, M and Shopova, M and Sultanov, G and Dimitrov, A and Ivanov, T and Litov, L and Pavlov, B and Petkov, P and Petrov, A and Cheng, T and Fang, W and Guo, Q and Wang, H and Yuan, L and Ahmad, M and Bauer, G and Hu, Z and Wang, Y and Yi, K and Chapon, E and Chen, GM and Chen, HS and Chen, M and Javaid, T and Kapoor, A and Leggat, D and Liao, H and Liu, Z-A and Sharma, R and Spiezia, A and Tao, J and Thomas-wilsker, J and Wang, J and Zhang, H and Zhang, S and Zhao, J and Agapitos, A and Ban, Y and Chen, C and Huang, Q and Levin, A and Li, Q and Lu, M and Lyu, X and Mao, Y and Qian, SJ and Wang, D and Wang, Q and Xiao, J and You, Z and Gao, X and Xiao, M and Avila, C and Cabrera, A and Florez, C and Fraga, J and Sarkar, A and Delgado, MAS and Jaramillo, J and Guisao, JM and Ramirez, F and Alvarez, JDR and González, CAS and Arbelaez, NV and Giljanovic, D and Godinovic, N and Lelas, D and Puljak, I and Antunovic, Z and Kovac, M and Sculac, T and Brigljevic, V and Ferencek, D and Majumder, D and Roguljic, M and Starodumov, A and Susa, T and Ather, MW and Attikis, A and Erodotou, E and Ioannou, A and Kole, G and Kolosova, M and Konstantinou, S and Mousa, J and Nicolaou, C and Ptochos, F and Razis, PA and Rykaczewski, H and Saka, H and Tsiakkouri, D and Finger, M and Finger, Jr and Kveton, A and Tomsa, J and Ayala, E and Jarrin, EC and Elgammal, S and Kamel, AE and Khalil, S and Lotfy, A and Mahmoud, MA and Bhowmik, S and De Oliveira, ACA and Dewanjee, RK and Ehataht, K and Kadastik, M and Raidal, M and Veelken, C and Eerola, P and Forthomme, L and Kirschenmann, H and Osterberg, K and Voutilainen, M and Brücken, E and Garcia, F and Havukainen, J and Karimäki, V and Kim, MS and Kinnunen, R and Lampén, T and Lassila-Perini, K and Lehti, S and Lindén, T and Siikonen, H and Tuominen, E and Tuominiemi, J and Luukka, P and Tuuva, T and Amendola, C and Besancon, M and Couderc, F and Dejardin, M and Denegri, D and Faure, JL and Ferri, F and Ganjour, S and Givernaud, A and Gras, P and de Monchenault, GH and Jarry, P and Lenzi, B and Locci, E and Malcles, J and Rander, J and Rosowsky, A and Sahin, MÃ� and Savoy-Navarro, A and Titov, M and Yu, GB and Ahuja, S and Beaudette, F and Bonanomi, M and Perraguin, AB and Busson, P and Charlot, C and Davignon, O and Diab, B and Falmagne, G and de Cassagnac, RG and Hakimi, A and Kucher, I and Lobanov, A and Perez, CM and Nguyen, M and Ochando, C and Paganini, P and Rembser, J and Salerno, R and Sauvan, JB and Sirois, Y and Zabi, A and Zghiche, A and Agram, J-L and Andrea, J and Bloch, D and Bourgatte, G and Brom, J-M and Chabert, EC and Collard, C and Fontaine, J-C and Gelé, D and Goerlach, U and Grimault, C and Bihan, A-CL and Hove, PV and Asilar, E and Beauceron, S and Bernet, C and Boudoul, G and Camen, C and Carle, A and Chanon, N and Contardo, D and Depasse, P and Mamouni, HE and Fay, J and Gascon, S and Gouzevitch, M and Ille, B and Jain, S and Laktineh, IB and Lattaud, H and Lesauvage, A and Lethuillier, M and Mirabito, L and Torterotot, L and Touquet, G and Donckt, MV and Viret, S and Adamov, G and Tsamalaidze, Z and Feld, L and Klein, K and Lipinski, M and Meuser, D and Pauls, A and Preuten, M and Rauch, MP and Schulz, J and Teroerde, M and Eliseev, D and Erdmann, M and Fackeldey, P and Fischer, B and Ghosh, S and Hebbeker, T and Hoepfner, K and Keller, H and Mastrolorenzo, L and Merschmeyer, M and Meyer, A and Mocellin, G and Mondal, S and Mukherjee, S and Noll, D and Novak, A and Pook, T and Pozdnyakov, A and Rath, Y and Reithler, H and Roemer, J and Schmidt, A and Schuler, SC and Sharma, A and Wiedenbeck, S and Zaleski, S and Dziwok, C and Flügge, G and Ahmad, WH and Hlushchenko, O and Kress, T and Nowack, A and Pistone, C and Pooth, O and Roy, D and Sert, H and Stahl, A and Ziemons, T and Petersen, HA and Martin, MA and Asmuss, P and Babounikau, I and Baxter, S and Behnke, O and Martínez, AB and Anuar, AAB and Borras, K and Botta, V and Brunner, D and Campbell, A and Cardini, A and Connor, P and Rodríguez, SC and Danilov, V and De Wit, A and Defranchis, MM and Didukh, L and Damiani, DD and Eckerlin, G and Eckstein, D and Eichhorn, T and Banos, LIE and Gallo, E and Geiser, A and Giraldi, A and Grohsjean, A and Guthoff, M and Harb, A and Jafari, A and Jomhari, NZ and Jung, H and Kasem, A and Kasemann, M and Kaveh, H and Kleinwort, C and Knolle, J and Krücker, D and Lange, W and Lenz, T and Lidrych, J and Lipka, K and Lohmann, W and Madlener, T and Mankel, R and Melzer-Pellmann, I-A and Metwally, J and Meyer, AB and Meyer, M and Missiroli, M and Mnich, J and Mussgiller, A and Myronenko, V and Otarid, Y and Adán, DP and Pflitsch, SK and Pitzl, D and Raspereza, A and Saggio, A and Saibel, A and Savitskyi, M and Scheurer, V and Schwanenberger, C and Singh, A and Ricardo, RES and Tonon, N and Turkot, O and Vagnerini, A and Van De Klundert, M and Walsh, R and Walter, D and Wen, Y and Wichmann, K and Wissing, C and Wuchterl, S and Zenaiev, O and Zlebcik, R and Aggleton, R and Bein, S and Benato, L and Benecke, A and De Leo, K and Dreyer, T and Ebrahimi, A and Eich, M and Feindt, F and Fröhlich, A and Garbers, C and Garutti, E and Gunnellini, P and Haller, J and Hinzmann, A and Karavdina, A and Kasieczka, G and Klanner, R and Kogler, R and Kutzner, V and Lange, J and Lange, T and Malara, A and Niemeyer, CEN and Nigamova, A and Rodriguez, KJP and Rieger, O and Schleper, P and Schumann, S and Schwandt, J and Schwarz, D and Sonneveld, J and Stadie, H and Steinbrück, G and Vormwald, B and Zoi, I and Bechtel, J and Berger, T and Butz, E and Caspart, R and Chwalek, T and De Boer, W and Dierlamm, A and Droll, A and Morabit, KE and Faltermann, N and Flöh, K and Giffels, M and Gottmann, A and Hartmann, F and Heidecker, C and Husemann, U and Katkov, I and Keicher, P and Koppenhöfer, R and Maier, S and Metzler, M and Mitra, S and Müller, D and Müller, T and Musich, M and Quast, G and Rabbertz, K and Rauser, J and Savoiu, D and Schäfer, D and Schnepf, M and Schröder, M and Seith, D and Shvetsov, I and Simonis, HJ and Ulrich, R and Wassmer, M and Weber, M and Wolf, R and Wozniewski, S and Anagnostou, G and Asenov, P and Daskalakis, G and Geralis, T and Kyriakis, A and Loukas, D and Paspalaki, G and Stakia, A and Diamantopoulou, M and Karasavvas, D and Karathanasis, G and Kontaxakis, P and Koraka, CK and Manousakis-katsikakis, A and Panagiotou, A and Papavergou, I and Saoulidou, N and Theofilatos, K and Vellidis, K and Vourliotis, E and Bakas, G and Kousouris, K and Papakrivopoulos, I and Tsipolitis, G and Zacharopoulou, A and Evangelou, I and Foudas, C and Gianneios, P and Katsoulis, P and Kokkas, P and Manitara, K and Manthos, N and Papadopoulos, I and Strologas, J and Bartók, M and Csanad, M and Gadallah, MMA and Lökös, S and Major, P and Mandal, K and Mehta, A and Pasztor, G and Surányi, O and Veres, GI and Bencze, G and Hajdu, C and Horvath, D and Sikler, F and Veszpremi, V and Vesztergombi, G and Czellar, S and Karancsi, J and Molnar, J and Szillasi, Z and Teyssier, D and Raics, P and Trocsanyi, ZL and Ujvari, B and Csorgo, T and Nemes, F and Novak, T and Choudhury, S and Komaragiri, JR and Kumar, D and Panwar, L and Tiwari, PC and Bahinipati, S and Dash, D and Kar, C and Mal, P and Mishra, T and Bindhu, VKMN and Nayak, A and Sahoo, DK and Sur, N and Swain, SK and Bansal, S and Beri, SB and Bhatnagar, V and Chaudhary, G and Chauhan, S and Dhingra, N and Gupta, R and Kaur, A and Kaur, S and Kumari, P and Meena, M and Sandeep, K and Sharma, S and Singh, JB and Virdi, AK and Ahmed, A and Bhardwaj, A and Choudhary, BC and Garg, RB and Gola, M and Keshri, S and Kumar, A and Naimuddin, M and Priyanka, P and Ranjan, K and Shah, A and Bharti, M and Bhattacharya, R and Bhattacharya, S and Bhowmik, D and Dutta, S and Ghosh, S and Gomber, B and Maity, M and Nandan, S and Palit, P and Rout, PK and Saha, G and Sahu, B and Sarkar, S and Sharan, M and Singh, B and Thakur, S and Behera, PK and Behera, SC and Kalbhor, P and Muhammad, A and Pradhan, R and Pujahari, PR and Sharma, A and Sikdar, AK and Dutta, D and Kumar, V and Naskar, K and Netrakanti, PK and Pant, LM and Shukla, P and Aziz, T and Bhat, MA and Dugad, S and Verma, RK and Mohanty, GB and Sarkar, U and Banerjee, S and Bhattacharya, S and Chatterjee, S and Chudasama, R and Guchait, M and Karmakar, S and Kumar, S and Majumder, G and Mazumdar, K and Mukherjee, S and Roy, D and Dube, S and Kansal, B and Pandey, S and Rane, A and Rastogi, A and Sharma, S and Bakhshiansohi, H and Zeinali, M and Chenarani, S and Etesami, SM and Khakzad, M and Najafabadi, MM and Felcini, M and Grunewald, M and Abbrescia, M and Aly, R and Aruta, C and Colaleo, A and Creanza, D and De Filippis, N and De Palma, M and Florio, AD and Pilato, AD and Elmetenawee, W and Fiore, L and Gelmi, A and Gul, M and Iaselli, G and Ince, M and Lezki, S and Maggi, G and Maggi, M and Margjeka, I and Mastrapasqua, V and Merlin, JA and My, S and Nuzzo, S and Pompili, A and Pugliese, G and Ranieri, A and Selvaggi, G and Silvestris, L and Simone, FM and Venditti, R and Verwilligen, P and Abbiendi, G and Battilana, C and Bonacorsi, D and Borgonovi, L and Braibant-Giacomelli, S and Campanini, R and Capiluppi, P and Castro, A and Cavallo, FR and Ciocca, C and Cuffiani, M and Dallavalle, GM and Diotalevi, T and Fabbri, F and Fanfani, A and Fontanesi, E and Giacomelli, P and Giommi, L and Grandi, C and Guiducci, L and Iemmi, F and Meo, SL and Marcellini, S and Masetti, G and Navarria, FL and Perrotta, A and Primavera, F and Rossi, AM and Rovelli, T and Siroli, GP and Tosi, N and Albergo, S and Costa, S and Mattia, AD and Potenza, R and Tricomi, A and Tuve, C and Barbagli, G and Cassese, A and Ceccarelli, R and Ciulli, V and Civinini, C and Dâ��Alessandro, R and Fiori, F and Focardi, E and Latino, G and Lenzi, P and Lizzo, M and Meschini, M and Paoletti, S and Seidita, R and Sguazzoni, G and Viliani, L and Benussi, L and Bianco, S and Piccolo, D and Bozzo, M and Ferro, F and Mulargia, R and Robutti, E and Tosi, S and Benaglia, A and Beschi, A and Brivio, F and Cetorelli, F and Ciriolo, V and De Guio, F and Dinardo, ME and Dini, P and Gennai, S and Ghezzi, A and Govoni, P and Guzzi, L and Malberti, M and Malvezzi, S and Massironi, A and Menasce, D and Monti, F and Moroni, L and Paganoni, M and Pedrini, D and Ragazzi, S and de Fatis, TT and Valsecchi, D and Zuolo, D and Buontempo, S and Cavallo, N and De Iorio, A and Fabozzi, F and Fienga, F and Iorio, AOM and Lista, L and Meola, S and Paolucci, P and Rossi, B and Sciacca, C and Voevodina, E and Azzi, P and Bacchetta, N and Bisello, D and Bortignon, P and Bragagnolo, A and Carlin, R and Checchia, P and De CastroManzano, P and Dorigo, T and Gasparini, F and Gasparini, U and Hoh, SY and Layer, L and Margoni, M and Meneguzzo, AT and Presilla, M and Ronchese, P and Rossin, R and Simonetto, F and Strong, G and Tosi, M and Yarar, H and Zanetti, M and Zotto, P and Zucchetta, A and Zumerle, G and Aimeâ��, C and Braghieri, A and Calzaferri, S and Fiorina, D and Montagna, P and Ratti, SP and Re, V and Ressegotti, M and Riccardi, C and Salvini, P and Vai, I and Vitulo, P and Biasini, M and Bilei, GM and Ciangottini, D and Fanò, L and Lariccia, P and Mantovani, G and Mariani, V and Menichelli, M and Moscatelli, F and Piccinelli, A and Rossi, A and Santocchia, A and Spiga, D and Tedeschi, T and Androsov, K and Azzurri, P and Bagliesi, G and Bertacchi, V and Bianchini, L and Boccali, T and Castaldi, R and Ciocci, MA and Dellâ��Orso, R and Domenico, MRD and Donato, S and Giannini, L and Giassi, A and Grippo, MT and Ligabue, F and Manca, E and Mandorli, G and Messineo, A and Palla, F and Ramirez-Sanchez, G and Rizzi, A and Rolandi, G and Chowdhury, SR and Scribano, A and Shafiei, N and Spagnolo, P and Tenchini, R and Tonelli, G and Turini, N and Venturi, A and Verdini, PG and Cavallari, F and Cipriani, M and Re, DD and Marco, ED and Diemoz, M and Longo, E and Meridiani, P and Organtini, G and Pandolfi, F and Paramatti, R and Quaranta, C and Rahatlou, S and Rovelli, C and Santanastasio, F and Soffi, L and Tramontano, R and Amapane, N and Arcidiacono, R and Argiro, S and Arneodo, M and Bartosik, N and Bellan, R and Bellora, A and Antequera, JB and Biino, C and Cappati, A and Cartiglia, N and Cometti, S and Costa, M and Covarelli, R and Demaria, N and Kiani, B and Legger, F and Mariotti, C and Maselli, S and Migliore, E and Monaco, V and Monteil, E and Monteno, M and Obertino, MM and Ortona, G and Pacher, L and Pastrone, N and Pelliccioni, M and Angioni, GLP and Ruspa, M and Salvatico, R and Siviero, F and Sola, V and Solano, A and Soldi, D and Staiano, A and Tornago, M and Trocino, D and Belforte, S and Candelise, V and Casarsa, M and Cossutti, F and Da Rold, A and Ricca, GD and Vazzoler, F and Dogra, S and Huh, C and Kim, B and Kim, DH and Kim, GN and Lee, J and Lee, SW and Moon, CS and Oh, YD and Pak, SI and Radburn-Smith, BC and Sekmen, S and Yang, YC and Kim, H and Moon, DH and Francois, B and Kim, TJ and Park, J and Cho, S and Choi, S and Go, Y and Ha, S and Hong, B and Lee, K and Lee, KS and Lim, J and Park, J and Park, SK and Yoo, J and Goh, J and Gurtu, A and Kim, HS and Kim, Y and Almond, J and Bhyun, JH and Choi, J and Jeon, S and Kim, J and Kim, JS and Ko, S and Kwon, H and Lee, H and Lee, K and Lee, S and Nam, K and Oh, BH and Oh, M and Oh, SB and Seo, H and Yang, UK and Yoon, I and Jeon, D and Kim, JH and Ko, B and Lee, JSH and Park, IC and Roh, Y and Song, D and Watson, IJ and Yoo, HD and Choi, Y and Hwang, C and Jeong, Y and Lee, H and Lee, Y and Yu, I and Maghrbi, Y and Veckalns, V and Juodagalvis, A and Rinkevicius, A and Tamulaitis, G and Vaitkevicius, A and Abdullah, WATW and Yusli, MN and Zolkapli, Z and Benitez, JF and Hernandez, AC and Quijada, JAM and Palomo, LV and Ayala, G and Castilla-Valdez, H and DeLa Cruz-Burelo, E and La Cruz, IH-D and Lopez-Fernandez, R and Herrera, CAM and Navarro, DAP and Sanchez-Hernandez, A and Moreno, SC and Barrera, CO and Ramirez-Garcia, M and Valencia, FV and Eysermans, J and Pedraza, I and Ibarguen, HAS and Estrada, CU and Pineda, AM and Mijuskovic, J and Raicevic, N and Krofcheck, D and Bheesette, S and Butler, PH and Ahmad, A and Asghar, MI and Awais, A and Awan, MIM and Hoorani, HR and Khan, WA and Shah, MA and Shoaib, M and Waqas, M and Avati, V and Grzanka, L and Malawski, M and Bialkowska, H and Bluj, M and Boimska, B and Frueboes, T and Górski, M and Kazana, M and Szleper, M and Traczyk, P and Zalewski, P and Bunkowski, K and Doroba, K and Kalinowski, A and Konecki, M and Krolikowski, J and Walczak, M and Araujo, M and Bargassa, P and Bastos, D and Boletti, A and Faccioli, P and Gallinaro, M and Hollar, J and Leonardo, N and Niknejad, T and Seixas, J and Shchelina, K and Toldaiev, O and Varela, J and Alexakhin, V and Bunin, P and Ershov, Y and Gavrilenko, M and Golunov, A and Golutvin, I and Gorbounov, N and Gorbunov, I and Kamenev, A and Karjavine, V and Lanev, A and Malakhov, A and Matveev, V and Palichik, V and Perelygin, V and Savina, M and Shmatov, S and Shulha, S and Smirnov, V and Teryaev, O and Yuldashev, BS and Zarubin, A and Gavrilov, G and Golovtcov, V and Ivanov, Y and Kim, V and Kuznetsova, E and Murzin, V and Oreshkin, V and Smirnov, I and Sosnov, D and Sulimov, V and Uvarov, L and Volkov, S and Vorobyev, A and Andreev, Y and Dermenev, A and Gninenko, S and Golubev, N and Karneyeu, A and Kirsanov, M and Krasnikov, N and Pashenkov, A and Pivovarov, G and Tlisov, D and Toropin, A and Epshteyn, V and Gavrilov, V and Lychkovskaya, N and Nikitenko, A and Popov, V and Safronov, G and Spiridonov, A and Stepennov, A and Toms, M and Vlasov, E and Zhokin, A and Aushev, T and Bychkova, O and Chadeeva, M and Philippov, D and Popova, E and Rusinov, V and Andreev, V and Azarkin, M and Dremin, I and Kirakosyan, M and Terkulov, A and Belyaev, A and Boos, E and Bunichev, V and Dubinin, M and Dudko, L and Gribushin, A and Klyukhin, V and Kodolova, O and Lokhtin, I and Obraztsov, S and Perfilov, M and Petrushanko, S and Savrin, V and Blinov, V and Dimova, T and Kardapoltsev, L and Ovtin, I and Skovpen, Y and Azhgirey, I and Bayshev, I and Kachanov, V and Kalinin, A and Konstantinov, D and Petrov, V and Ryutin, R and Sobol, A and Troshin, S and Tyurin, N and Uzunian, A and Volkov, A and Babaev, A and Iuzhakov, A and Okhotnikov, V and Sukhikh, L and Borchsh, V and Ivanchenko, V and Tcherniaev, E and Adzic, P and Cirkovic, P and Dordevic, M and Milenovic, P and Milosevic, J and Aguilar-Benitez, M and Maestre, JA and Fernández, AÃ� and Bachiller, I and Luna, MB and Bedoya, CF and Montoya, CAC and Cepeda, M and Cerrada, M and Colino, N and DeLa Cruz, B and Peris, AD and Ramos, JPF and Flix, J and Fouz, MC and Alonso, AG and Lopez, OG and Lopez, SG and Hernandez, JM and Josa, MI and Holgado, JL and Moran, D and Tobar, Ã�N and Yzquierdo, AP-C and Pelayo, JP and Redondo, I and Romero, L and Navas, SS and Soares, MS and Triossi, A and Gómez, LU and Willmott, C and Albajar, C and de Trocóniz, JF and Reyes-Almanza, R and Gonzalez, BA and Cuevas, J and Erice, C and Menendez, JF and Folgueras, S and Caballero, IG and Cortezon, EP and Ã�lvarez, CR and Sau, JR and Bouza, VR and Cruz, SS and Trapote, A and Cifuentes, JAB and Cabrillo, IJ and Calderon, A and Quero, BC and Campderros, JD and Fernandez, M and Manteca, PJF and Gomez, G and Rivero, CM and Arbol, PMR and Matorras, F and Gomez, JP and Prieels, C and Ricci-Tam, F and Rodrigo, T and Ruiz-Jimeno, A and Scodellaro, L and Vila, I and Garcia, JMV and Jayananda, M and Kailasapathy, B and Sonnadara, DUJ and Wickramarathna, DDC and Dharmaratna, WGD and Liyanage, K and Perera, N and Wickramage, N and Aarrestad, TK and Abbaneo, D and Akgun, B and Auffray, E and Auzinger, G and Baechler, J and Baillon, P and Ball, AH and Barney, D and Bendavid, J and Beni, N and Bianco, M and Bocci, A and Bossini, E and Brondolin, E and Camporesi, T and Garrido, MC and Cerminara, G and Cristella, L and dâ��Enterria, D and Dabrowski, A and Daci, N and Daponte, V and David, A and De Roeck, A and Deile, M and Maria, RD and Dobson, M and Dünser, M and Dupont, N and Elliott-Peisert, A and Emriskova, N and Fallavollita, F and Fasanella, D and Fiorendi, S and Florent, A and Franzoni, G and Fulcher, J and Funk, W and Giani, S and Gigi, D and Gill, K and Glege, F and Gouskos, L and Guilbaud, M and Gulhan, D and Haranko, M and Hegeman, J and Iiyama, Y and Innocente, V and James, T and Janot, P and Kaspar, J and Kieseler, J and Komm, M and Kratochwil, N and Lange, C and Laurila, S and Lecoq, P and Long, K and Lourenço, C and Malgeri, L and Mallios, S and Mannelli, M and Meijers, F and Mersi, S and Meschi, E and Moortgat, F and Mulders, M and Niedziela, J and Orfanelli, S and Orsini, L and Pantaleo, F and Pape, L and Perez, E and Peruzzi, M and Petrilli, A and Petrucciani, G and Pfeiffer, A and Pierini, M and Quast, T and Rabady, D and Racz, A and Rieger, M and Rovere, M and Sakulin, H and Salfeld-Nebgen, J and Scarfi, S and Schäfer, C and Schwick, C and Selvaggi, M and Sharma, A and Silva, P and Snoeys, W and Sphicas, P and Summers, S and Tavolaro, VR and Treille, D and Tsirou, A and Van Onsem, GP and Vartak, A and Verzetti, M and Wozniak, KA and Zeuner, WD and Caminada, L and Erdmann, W and Horisberger, R and Ingram, Q and Kaestli, HC and Kotlinski, D and Langenegger, U and Rohe, T and Backhaus, M and Berger, P and Calandri, A and Chernyavskaya, N and De Cosa, A and Dissertori, G and Dittmar, M and DonegÃ, M and Dorfer, C and Gadek, T and Espinosa, TAG and Grab, C and Hits, D and Lustermann, W and Lyon, A-M and Manzoni, RA and Meinhard, MT and Micheli, F and Nessi-Tedaldi, F and Pauss, F and Perovic, V and Perrin, G and Pigazzini, S and Ratti, MG and Reichmann, M and Reissel, C and Reitenspiess, T and Ristic, B and Ruini, D and Becerra, DAS and Schönenberger, M and Stampf, V and Steggemann, J and Olsson, MLV and Wallny, R and Zhu, DH and Amsler, C and Botta, C and Brzhechko, D and Canelli, MF and Burgo, RD and Heikkilä, JK and Huwiler, M and Jofrehei, A and Kilminster, B and Leontsinis, S and Macchiolo, A and Meiring, P and Mikuni, VM and Molinatti, U and Neutelings, I and Rauco, G and Reimers, A and Robmann, P and Schweiger, K and Takahashi, Y and Adloff, C and Kuo, CM and Lin, W and Roy, A and Sarkar, T and Yu, SS and Ceard, L and Chang, P and Chao, Y and Chen, KF and Chen, PH and Hou, W-S and Li, Y and Lu, R-S and Paganis, E and Psallidas, A and Steen, A and Yazgan, E and Asavapibhop, B and Asawatangtrakuldee, C and Srimanobhas, N and Boran, F and Damarseckin, S and Demiroglu, ZS and Dolek, F and Dozen, C and Dumanoglu, I and Eskut, E and Gokbulut, G and Guler, Y and Guler, EG and Hos, I and Isik, C and Kangal, EE and Kara, O and Topaksu, AK and Kiminsu, U and Onengut, G and Ozdemir, K and Polatoz, A and Simsek, AE and Tali, B and Tok, UG and Turkcapar, S and Zorbakir, IS and Zorbilmez, C and Isildak, B and Karapinar, G and Ocalan, K and Yalvac, M and Atakisi, IO and Gülmez, E and Kaya, M and Kaya, O and Ã�zçelik, Ã� and Tekten, S and Yetkin, EA and Cakir, A and Cankocak, K and Komurcu, Y and Sen, S and Sen, FA and Cerci, S and Kaynak, B and Ozkorucuklu, S and Cerci, DS and Grynyov, B and Levchuk, L and Bhal, E and Bologna, S and Brooke, JJ and Clement, E and Cussans, D and Flacher, H and Goldstein, J and Heath, GP and Heath, HF and Kreczko, L and Krikler, B and Paramesvaran, S and Sakuma, T and Nasr-Storey, SSE and Smith, VJ and Stylianou, N and Taylor, J and Titterton, A and Bell, KW and Belyaev, A and Brew, C and Brown, RM and Cockerill, DJA and Ellis, KV and Harder, K and Harper, S and Linacre, J and Manolopoulos, K and Newbold, DM and Olaiya, E and Petyt, D and Reis, T and Schuh, T and Shepherd-Themistocleous, CH and Thea, A and Tomalin, IR and Williams, T and Bainbridge, R and Bloch, P and Bonomally, S and Borg, J and Breeze, S and Buchmuller, O and Bundock, A and Cepaitis, V and Chahal, GS and Colling, D and Dauncey, P and Davies, G and Negra, MD and Fedi, G and Hall, G and Iles, G and Langford, J and Lyons, L and Magnan, A-M and Malik, S and Martelli, A and Milosevic, V and Nash, J and Palladino, V and Pesaresi, M and Raymond, DM and Richards, A and Rose, A and Scott, E and Seez, C and Shtipliyski, A and Stoye, M and Tapper, A and Uchida, K and Virdee, T and Wardle, N and Webb, SN and Winterbottom, D and Zecchinelli, AG and Cole, JE and Hobson, PR and Khan, A and Kyberd, P and Mackay, CK and Reid, ID and Teodorescu, L and Zahid, S and Abdullin, S and Brinkerhoff, A and Call, K and Caraway, B and Dittmann, J and Hatakeyama, K and Kanuganti, AR and Madrid, C and McMaster, B and Pastika, N and Sawant, S and Smith, C and Wilson, J and Bartek, R and Dominguez, A and Uniyal, R and Hernandez, AMV and Buccilli, A and Charaf, O and Cooper, SI and Gleyzer, SV and Henderson, C and Perez, CU and Rumerio, P and West, C and Akpinar, A and Albert, A and Arcaro, D and Cosby, C and Demiragli, Z and Gastler, D and Rohlf, J and Salyer, K and Sperka, D and Spitzbart, D and Suarez, I and Yuan, S and Zou, D and Benelli, G and Burkle, B and Coubez, X and Cutts, D and Duh, Y and Hadley, M and Heintz, U and Hogan, JM and Kwok, KHM and Laird, E and Landsberg, G and Lau, KT and Lee, J and Narain, M and Sagir, S and Syarif, R and Usai, E and Wong, WY and Yu, D and Zhang, W and Band, R and Brainerd, C and Breedon, R and DeLa BarcaSanchez, MC and Chertok, M and Conway, J and Conway, R and Cox, PT and Erbacher, R and Flores, C and Funk, G and Jensen, F and Ko, W and Kukral, O and Lander, R and Mulhearn, M and Pellett, D and Pilot, J and Shi, M and Taylor, D and Tos, K and Tripathi, M and Yao, Y and Zhang, F and Bachtis, M and Cousins, R and Dasgupta, A and Hamilton, D and Hauser, J and Ignatenko, M and Iqbal, MA and Lam, T and Mccoll, N and Nash, WA and Regnard, S and Saltzberg, D and Schnaible, C and Stone, B and Valuev, V and Burt, K and Chen, Y and Clare, R and Gary, JW and Hanson, G and Karapostoli, G and Long, OR and Manganelli, N and Negrete, MO and Paneva, MI and Si, W and Wimpenny, S and Zhang, Y and Branson, JG and Chang, P and Cittolin, S and Cooperstein, S and Deelen, N and Duarte, J and Gerosa, R and Gilbert, D and Krutelyov, V and Letts, J and Masciovecchio, M and May, S and Padhi, S and Pieri, M and Sharma, V and Tadel, M and Würthwein, F and Yagil, A and Amin, N and Campagnari, C and Citron, M and Dorsett, A and Dutta, V and Incandela, J and Marsh, B and Mei, H and Ovcharova, A and Qu, H and Quinnan, M and Richman, J and Sarica, U and Stuart, D and Wang, S and Bornheim, A and Cerri, O and Dutta, I and Lawhorn, JM and Lu, N and Mao, J and Newman, HB and Ngadiuba, J and Nguyen, TQ and Pata, J and Spiropulu, M and Vlimant, JR and Wang, C and Xie, S and Zhang, Z and Zhu, RY and Alison, J and Andrews, MB and Ferguson, T and Mudholkar, T and Paulini, M and Sun, M and Vorobiev, I and Cumalat, JP and Ford, WT and MacDonald, E and Mulholland, T and Patel, R and Perloff, A and Stenson, K and Ulmer, KA and Wagner, SR and Alexander, J and Cheng, Y and Chu, J and Cranshaw, DJ and Datta, A and Frankenthal, A and Mcdermott, K and Monroy, J and Patterson, JR and Quach, D and Ryd, A and Sun, W and Tan, SM and Tao, Z and Thom, J and Wittich, P and Zientek, M and Albrow, M and Alyari, M and Apollinari, G and Apresyan, A and Apyan, A and Banerjee, S and Bauerdick, LAT and Beretvas, A and Berry, D and Berryhill, J and Bhat, PC and Burkett, K and Butler, JN and Canepa, A and Cerati, GB and Cheung, HWK and Chlebana, F and Cremonesi, M and Elvira, VD and Freeman, J and Gecse, Z and Gottschalk, E and Gray, L and Green, D and Grünendahl, S and Gutsche, O and Harris, RM and Hasegawa, S and Heller, R and Herwig, TC and Hirschauer, J and Jayatilaka, B and Jindariani, S and Johnson, M and Joshi, U and Klabbers, P and Klijnsma, T and Klima, B and Kortelainen, MJ and Lammel, S and Lincoln, D and Lipton, R and Liu, M and Liu, T and Lykken, J and Maeshima, K and Mason, D and McBride, P and Merkel, P and Mrenna, S and Nahn, S and Oâ��Dell, V and Papadimitriou, V and Pedro, K and Pena, C and Prokofyev, O and Ravera, F and Hall, AR and Ristori, L and Schneider, B and Sexton-Kennedy, E and Smith, N and Soha, A and Spalding, WJ and Spiegel, L and Stoynev, S and Strait, J and Taylor, L and Tkaczyk, S and Tran, NV and Uplegger, L and Vaandering, EW and Weber, HA and Woodard, A and Acosta, D and Avery, P and Bourilkov, D and Cadamuro, L and Cherepanov, V and Errico, F and Field, RD and Guerrero, D and Joshi, BM and Kim, M and Konigsberg, J and Korytov, A and Lo, KH and Matchev, K and Menendez, N and Mitselmakher, G and Rosenzweig, D and Shi, K and Sturdy, J and Wang, J and Wang, S and Zuo, X and Adams, T and Askew, A and Diaz, D and Habibullah, R and Hagopian, S and Hagopian, V and Johnson, KF and Khurana, R and Kolberg, T and Martinez, G and Prosper, H and Schiber, C and Yohay, R and Zhang, J and Baarmand, MM and Butalla, S and Elkafrawy, T and Hohlmann, M and Noonan, D and Rahmani, M and Saunders, M and Yumiceva, F and Adams, MR and Apanasevich, L and Gonzalez, HB and Cavanaugh, R and Chen, X and Dittmer, S and Evdokimov, O and Gerber, CE and Hangal, DA and Hofman, DJ and Mills, C and Oh, G and Roy, T and Tonjes, MB and Varelas, N and Viinikainen, J and Wang, X and Wu, Z and Ye, Z and Alhusseini, M and Dilsiz, K and Durgut, S and Gandrajula, RP and Haytmyradov, M and Khristenko, V and Köseyan, OK and Merlo, J-P and Mestvirishvili, A and Moeller, A and Nachtman, J and Ogul, H and Onel, Y and Ozok, F and Penzo, A and Snyder, C and Tiras, E and Wetzel, J and Amram, O and Blumenfeld, B and Corcodilos, L and Eminizer, M and Gritsan, AV and Kyriacou, S and Maksimovic, P and Mantilla, C and Roskes, J and Swartz, M and Vámi, TÃ� and Barrera, CB and Baringer, P and Bean, A and Bylinkin, A and Isidori, T and Khalil, S and King, J and Krintiras, G and Kropivnitskaya, A and Lindsey, C and Minafra, N and Murray, M and Rogan, C and Royon, C and Sanders, S and Schmitz, E and Takaki, JDT and Wang, Q and Williams, J and Wilson, G and Duric, S and Ivanov, A and Kaadze, K and Kim, D and Maravin, Y and Mitchell, T and Modak, A and Mohammadi, A and Rebassoo, F and Wright, D and Adams, E and Baden, A and Baron, O and Belloni, A and Eno, SC and Feng, Y and Hadley, NJ and Jabeen, S and Jeng, GY and Kellogg, RG and Koeth, T and Mignerey, AC and Nabili, S and Seidel, M and Skuja, A and Tonwar, SC and Wang, L and Wong, K and Abercrombie, D and Allen, B and Bi, R and Brandt, S and Busza, W and Cali, IA and Chen, Y and Dâ��Alfonso, M and Ceballos, GG and Goncharov, M and Harris, P and Hsu, D and Hu, M and Klute, M and Kovalskyi, D and Krupa, J and Lee, Y-J and Luckey, PD and Maier, B and Marini, AC and Mcginn, C and Mironov, C and Narayanan, S and Niu, X and Paus, C and Rankin, D and Roland, C and Roland, G and Shi, Z and Stephans, GSF and Sumorok, K and Tatar, K and Velicanu, D and Wang, J and Wang, TW and Wang, Z and Wyslouch, B and Chatterjee, RM and Evans, A and Hansen, P and Hiltbrand, J and Jain, S and Krohn, M and Kubota, Y and Lesko, Z and Mans, J and Revering, M and Rusack, R and Saradhy, R and Schroeder, N and Strobbe, N and Wadud, MA and Acosta, JG and Oliveros, S and Bloom, K and Chauhan, S and Claes, DR and Fangmeier, C and Finco, L and Golf, F and Fernández, JRG and Joo, C and Kravchenko, I and Siado, JE and Snow, GR and Tabb, W and Yan, F and Agarwal, G and Bandyopadhyay, H and Harrington, C and Hay, L and Iashvili, I and Kharchilava, A and McLean, C and Nguyen, D and Pekkanen, J and Rappoccio, S and Roozbahani, B and Alverson, G and Barberis, E and Freer, C and Haddad, Y and Hortiangtham, A and Li, J and Madigan, G and Marzocchi, B and Morse, DM and Nguyen, V and Orimoto, T and Parker, A and Skinnari, L and Tishelman-Charny, A and Wamorkar, T and Wang, B and Wisecarver, A and Wood, D and Bhattacharya, S and Bueghly, J and Chen, Z and Gilbert, A and Gunter, T and Hahn, KA and Odell, N and Schmitt, MH and Sung, K and Velasco, M and Bucci, R and Dev, N and Goldouzian, R and Hildreth, M and Anampa, KH and Jessop, C and Karmgard, DJ and Lannon, K and Loukas, N and Marinelli, N and Mcalister, I and Meng, F and Mohrman, K and Musienko, Y and Ruchti, R and Siddireddy, P and Taroni, S and Wayne, M and Wightman, A and Wolf, M and Zygala, L and Alimena, J and Bylsma, B and Cardwell, B and Durkin, LS and Francis, B and Hill, C and Lefeld, A and Winer, BL and Yates, BR and Bonham, B and Das, P and Dezoort, G and Elmer, P and Greenberg, B and Haubrich, N and Higginbotham, S and Kalogeropoulos, A and Kopp, G and Kwan, S and Lange, D and Lucchini, MT and Luo, J and Marlow, D and Mei, K and Ojalvo, I and Olsen, J and Palmer, C and Piroué, P and Stickland, D and Tully, C and Malik, S and Norberg, S and Barnes, VE and Chawla, R and Das, S and Gutay, L and Jones, M and Jung, AW and Negro, G and Neumeister, N and Peng, CC and Piperov, S and Purohit, A and Qiu, H and Schulte, JF and Stojanovic, M and Trevisani, N and Wang, F and Wildridge, A and Xiao, R and Xie, W and Dolen, J and Parashar, N and Baty, A and Dildick, S and Ecklund, KM and Freed, S and Geurts, FJM and Kilpatrick, M and Kumar, A and Li, W and Padley, BP and Redjimi, R and Roberts, J and Rorie, J and Shi, W and Leiton, AGS and Bodek, A and de Barbaro, P and Demina, R and Dulemba, JL and Fallon, C and Ferbel, T and Galanti, M and Garcia-Bellido, A and Hindrichs, O and Khukhunaishvili, A and Ranken, E and Taus, R and Chiarito, B and Chou, JP and Gandrakota, A and Gershtein, Y and Halkiadakis, E and Hart, A and Heindl, M and Hughes, E and Kaplan, S and Karacheban, O and Laflotte, I and Lath, A and Montalvo, R and Nash, K and Osherson, M and Salur, S and Schnetzer, S and Somalwar, S and Stone, R and Thayil, SA and Thomas, S and Wang, H and Acharya, H and Delannoy, AG and Spanier, S and Bouhali, O and Dalchenko, M and Delgado, A and Eusebi, R and Gilmore, J and Huang, T and Kamon, T and Kim, H and Luo, S and Malhotra, S and Mueller, R and Overton, D and Perniè, L and Rathjens, D and Safonov, A and Akchurin, N and Damgov, J and Hegde, V and Kunori, S and Lamichhane, K and Lee, SW and Mengke, T and Muthumuni, S and Peltola, T and Undleeb, S and Volobouev, I and Wang, Z and Whitbeck, A and Appelt, E and Greene, S and Gurrola, A and Janjam, R and Johns, W and Maguire, C and Melo, A and Ni, H and Padeken, K and Romeo, F and Sheldon, P and Tuo, S and Velkovska, J and Arenton, MW and Cox, B and Cummings, G and Hakala, J and Hirosky, R and Joyce, M and Ledovskoy, A and Li, A and Neu, C and Tannenwald, B and Wang, Y and Wolfe, E and Xia, F and Karchin, PE and Poudyal, N and Thapa, P and Black, K and Bose, T and Buchanan, J and Caillol, C and Dasu, S and De Bruyn, I and Everaerts, P and Galloni, C and He, H and Herndon, M and Hervé, A and Hussain, U and Lanaro, A and Loeliger, A and Loveless, R and Sreekala, JM and Mallampalli, A and Pinna, D and Savin, A and Shang, V and Sharma, V and Smith, WH and Teague, D and Trembath-reichert, S and Vetens, W and Collaboration, CMS (2022) Search for strongly interacting massive particles generating trackless jets in proton–proton collisions at √s=13TeV. In: European Physical Journal C, 82 (3).

U

Uda, T and Okabe, TH and Waseda, Y and Jacob, KT (2000) Contactless Electrochemical Reduction of Titanium (II) Chloride by Aluminum. In: Metallurgical and Materials Transactions B, 31 (04). pp. 713-721.

Uda, Tetsuya and Jacob, Thomas K and Hirasawa, Masahiro (2000) Technique for Enhanced Rare Earth Separation. In: Science, 289 (5488). pp. 2326-2329.

Uda, Tetsuya and Okabe, Toru H and Waseda, Yoshio and Jacob, KT (1999) Phase equilibria and thermodynamics of the system Dy-Mg-Cl at 1073 K. In: Journal of Alloys and Compounds, 284 (1-2). pp. 282-288.

Udavant, R and Thawarkar, S and Rondiya, S and Shelke, A and Aher, R and Ajithkumar, TG and Cross, RW and Dzade, NY and Jadkar, S (2022) Lead-Free Solid State Mechanochemical Synthesis of Cs2NaBi1-xFexCl6 Double Perovskite: Reduces Band Gap and Enhances Optical Properties. In: Inorganic Chemistry, 62 (12). pp. 4861-4871.

Udyavar, Mradulla S and Dwarakadasa, ES (1992) Surface depletion of lithium in medium-strength aeronautical AI-Li alloys during heat treatment. In: Journal of Materials Science Letters, 11 (8). 490 -492.

Ueno, S and Jacob, KT and Waseda, Y (1989) Activities in liquid Na K and Al Mg alloys estimated using the pseudopotential theory of metals. In: High Temperature Materials and Processes, 8 (2). 89- 94.

Ueno, S and Waseda, Y and Jacob, KT and Tamaki, S (1988) Theoretical Treatment of Interaction Parameters in Multicomponent Metallic Solutions. In: Steel Research, 59 (11). 474 -483.

Ullal, CK and Balasubramaniam, KR and Gandhi, AS and Jayaram, V (2001) Non-equilibrium phase synthesis in $Al_2O_3-Y_2O_3$ by spray pyrolysis of nitrate precursors. In: Acta Materialia, 49 (14). pp. 2691-2699.

Umarjia, AM and Somasundaram, P and Rao, CNR (1988) Y3-xBa3+xCu6O14+δ system: A new family of superconductors. In: Physica C: Superconductivity, 153-15 (1). pp. 497-498.

Ummethala, R and Jayaraj, J and Karamched, PS and Rathinavelu, S and Singh, N and Surreddi, KB and Prashanth, KG (2021) In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta. In: Journal of Materials Engineering and Performance .

Upadhyay, A and Kumar, N and Adhikary, GD and Singh, RP and Mishra, A and Ranjan, R (2022) A combination of large unipolar electrostrain and d 33in a non-ergodic relaxor ferroelectric. In: Journal of Applied Physics, 132 (20).

Upadhyay, Ashutosh and Pandey, Rishikesh and Singh, Akhilesh Kumar (2017) Origin of ferroelectric P-E loop in cubic compositions and structure of poled (1-x)Bi(Mg1/2Zr1/2)O-3-xPbTiO(3) piezoceramics. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 100 (4). pp. 1743-1750.

Upadhyay, PK and Pathak, S and Mishra, R and Kumar, R and Jain, A (2023) A Multifaceted Scaffold for Building Bioactive Compounds: Phenothiazine. In: Letters in Organic Chemistry, 20 (7). pp. 618-631.

Upadhyay, Pratik P and Pudasaini, Nawin and Mishra, Manish Kumar and Ramamurty, Upadrasta and Rantanen, Jukka (2018) Early assessment of bulk powder processability as a part of solid form screening. In: CHEMICAL ENGINEERING RESEARCH & DESIGN, 136 . pp. 447-455.

Upadhyay, Rahul and Naskar, Sharmistha and Bhaskar, Nitu and Bose, Suryasarathi and Basu, Bikramjit (2016) Modulation of Protein Adsorption and Cell Proliferation on Polyethylene Immobilized Graphene Oxide Reinforced HDPE Bionanocomposites. In: ACS APPLIED MATERIALS & INTERFACES, 8 (19). pp. 11954-11968.

Uppara, B and Singh, S and Avasthi, S and Vinod, P and Nagahanumaiah, N and Ramamurthy, PC (2024) Optimization of laser patterning process for eco-friendly tin-halide perovskite solar module � with a nanosecond green laser. In: Thin Solid Films, 807 .

Upreti, D and Rajendran, A and Lenka, N and Srivastava, R and Sen Gupta, R and Maiti, B and Bose, S and Patro, TU (2023) Designing a robust biocompatible porous polymeric membrane using Laponite and graphene oxide for versatile and selective adsorption of water contaminants. In: Chemical Engineering Journal, 464 .

Uva Narayanan, C and Daniel, A and Praveenkumar, K and Manivasagam, G and Suwas, S and Prashanth, KG and Suya Prem Anand, P (2024) Effect of scanning speed on mechanical, corrosion, and fretting-tribocorrosion behavior of austenitic 316L stainless steel produced by laser powder bed fusion process. In: Journal of Manufacturing Processes, 131 . pp. 1582-1593.

Uyyuru, RK and Surappa, MK and Brusethaug, S (2007) Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions. In: Tribology International, 40 (2). pp. 365-373.

V

Vadlamani, Bhaskar Sravan and Lalitha, K and Ranjan, Rajeev (2013) Anomalous polarization in the antiferroelectric-ferroelectric phase coexistence state in PbZrO3-Bi(Mg1/2Ti1/2)O-3. In: JOURNAL OF APPLIED PHYSICS, 114 (23).

Vaidehi, N and Akila, R and Shukla, AK and Jacob, KT (1986) Enhanced Ionic Conduction in Dispersed Solid Electrolyte Systems $CaF_2-Al_2O_3$ and $CaF_2-CeO_2$. In: Materials Research Bulletin, 21 (8). pp. 909-916.

Vaidya, M and Anupam, Ameey and Bharadwaj, J Vijay and Srivastava, Chandan and Murty, B S (2019) Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering. In: JOURNAL OF ALLOYS AND COMPOUNDS, 791 . pp. 1114-1121.

Vaidyanathan, R and Dunand, DC and Ramamurty, U (2000) Fatigue crack-growth in shape-memory NiTi and NiTi-TiC composites. In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 289 (1-2). pp. 208-216.

Vaishakh, KV and Narasimhan, R and Yazar, KU and Suwas, S (2020) Mixed-mode (I and II) fracture behavior of a basal-textured magnesium alloy. In: Acta Materialia, 193 . pp. 99-114.

Valderrama, JN and Jacob, KT (1978) Vapor pressure and thermodynamic properties of MgIn2O4. In: Journal of Inorganic and Nuclear Chemistry, 40 (6). pp. 993-997.

Valderrama-N, J and Jacob, KT (1977) Vapor pressure and dissociation energy of (In2O). In: Thermochimica Acta, 21 (2). 215-224 .

Valsan, M and Parameswaran, P and Rao, Bhanu Sankara K and Vijayalakshmi, M and Shastry, DH and Mannan, SL (1992) High-temperature low-cycle fatigue behavior of a NIMONIC PE-16 superalloy—Correlation with deformation and fracture. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (6). pp. 1751-1761.

Valsan, M and Sastry, DH and Rao, KBS and Mannan, SL (1994) Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy. In: Metallurgical and materials transactions a, 25 (1). pp. 159-171.

Vamsi, K V and Karthikeyan, S (2018) High-throughput estimation of planar fault energies in A(3)B compounds with L1(2) structure. In: ACTA MATERIALIA, 145 . pp. 532-542.

Vamsi, K V and Karthikeyan, S (2017) Yield anomaly in L1(2) Co3AlxW1-x vis-a-vis Ni3Al. In: SCRIPTA MATERIALIA, 130 . pp. 269-273.

Vamsi, KV and Goswami, KN and Vinay, KS and Verma, SK and Balamuralikrishnan, R and Das, N and Banerjee, D and Karthikeyan, S (2014) Computational design of model Re/Ru bearing Ni-base superalloys. In: 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014, 12-16 May 2014, France.

Vamsi, KV and Goswami, KN and Vinay, KS and Verma, SK and Balamuralikrishnan, R and Das, Niranjan and Banerjee, D and Karthikeyan, S (2014) Computational design of model Re/Ru bearing Ni-base superalloys. In: 2nd European Symposium on Superalloys and their Applications, MAY 12-16, 2014, Giens, FRANCE.

Vamsi, KV and Karthikeyan, S (2021) Deformation modes and yield strength anomaly in L12 compounds. In: Journal of Alloys and Compounds, 860 .

Vamsi, KV and Karthikeyan, S (2012) EFFECT OF OFF-STOICHIOMETRY AND TERNARY ADDITIONS ON PLANAR FAULT ENERGIES IN Ni3Al. In: 12th International Symposium on Superalloys, 09-13, 2012 , Seven Springs, PA , pp. 521-530.

Vamsi, KV and Karthikeyan, S (2021) Modeling APB energies in multicomponent Ni-base superalloys. In: Intermetallics, 132 .

Vamsi, KV and Karthikeyan, S (2014) Modelling ternary effects on antiphase boundary energy of Ni3Al. In: 2nd European Symposium on Superalloys and their Applications, MAY 12-16, 2014, Giens, FRANCE.

Varamban, SV and Jacob, KT (1997) Thermodynamic constraints along isograms in ternary systems: application to three-phase equilibria. In: Materials Science and Engineering B, 49 (2). pp. 100-109.

Varamban, Vana S and Jacob, KT (1998) Discussion of "Retrograde solubility in semiconductors. In: Metallurgical and Materials Transactions A, 29 (5). pp. 1525-1526.

Varamban, Vana S and Jacob, KT (1997) Relation between integral and partial properties of ternary solutions along different composition trajectories. In: High Temperature Materials and Processes, 16 (4). pp. 227-242.

Varghese, V and Chattopadhyay, K and Narayanasamy, A (2004) Factors influencing the kinetics of electrochemical reactions in milling. In: Journal of Materials Science, 39 (16-17). pp. 5161-5167.

Varghese, EV and Thomas, B and Schwandt, C and Ramamurthy, PC and Joseph, A (2023) Benzimidazole-modified polyaniline micro-shells for electrochemical detection of cadmium in aqueous solution. In: Journal of Electrochemical Science and Engineering, 13 (2). pp. 275-286.

Varghese, EV and Thomas, B and Schwandt, C and Ramamurthy, PC and Joseph, A (2022) Polyanthranilic acid microspheres as an active material for electrochemical detection of sub-picomolar lead ion concentrations in aqueous media. In: Ionics .

Varghese, V and Sharma, A and Chattopadhyay, K (2001) Reaction ball milling of systems involving ionic bonds. In: Materials Science and Engineering A, 304-30 . pp. 434-437.

Varma, KBR and Rao, KJ and Rao, CNR (1989) Novel features of rapidly quenched melts of Bi2(Ca,Sr) 3Cu2O8+δ. In: Applied Physics Letters, 54 (1). pp. 69-71.

Varma, Sreevidya G and Kiran, MSRN and Muthu, DVS and Ramamurty, U and Sood, AK and Asokan, S (2012) Thermally reversing window in Ge15Te85-xInx glasses: Nanoindentation and micro-Raman studies. In: JOURNAL OF NON-CRYSTALLINE SOLIDS, 358 (23). pp. 3103-3108.

Varman Kesavan, A and Panidhara, KM and Ramamurthy, PC (2021) Role of silver-PC61BM composite electron transport layer in methylammonium lead iodide solar cell. In: Materials Letters, 302 .

Varughese, S and Kiran, MSRN and Ramamurty, U and Desiraju, GR (2012) Nanoindentation as a probe for mechanically-induced molecular migration in layered organic donor-acceptor complexes. In: Chemistry - An Asian Journal, 7 (9). pp. 2118-2125.

Varughese, Sunil and Kiran, MSRN and Solanko, Katarzyna A and Bond, Andrew D and Ramamurty, U and Desiraju, Gautam R (2011) Interaction anisotropy and shear instability of aspirin polymorphs established by nanoindentation. In: Chemical Science, 2 (11). pp. 2236-2242.

Vasan, SS and Modak, Jayant M and Natarajan, KA (2001) Some recent advances in the bioprocessing of bauxite. In: International Journal of Mineral Processing, 62 (1-4). pp. 173-186.

Vasanth Kumar, R and Keshavamurthy, R and Perugu, CS and Alipour, M and Siddaraju, C (2021) Influence of hot rolling on friction and wear behaviour of Al6061-ZrB2 in-situ metal matrix composites. In: Journal of Manufacturing Processes, 69 . pp. 473-490.

Vasanthakumar, B and Ravishankar, H and Subramanian, S (2013) Microbially induced selective flotation of sphalerite from galena using mineral-adapted strains of Bacillus megaterium. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 112 . pp. 279-286.

Vasanthakumar, B and Ravishankar, H and Subramanian, S (2017) Selective bio-flotation of sphalerite from galena using mineral - adapted strains of Bacillus subtilis. In: MINERALS ENGINEERING, 110 . pp. 179-184.

Vasanthakumar, Balasubramanian and Ravishankar, Honnavar and Subramanian, Sankaran (2014) Basic studies on the role of components of Bacillus megaterium as flotation biocollectors in sulphide mineral separation. In: APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 98 (6). pp. 2719-2728.

Vasanthakumar, Balasubramanian and Ravishankar, Honnavar and Subramanian, Sankaran (2012) A Novel Property of DNA - As a Bioflotation Reagent in Mineral Processing. In: PLOS ONE, 7 (7).

Vasu, KI and Murty, KN (1972) A resistometric study of solute–solute interaction in dilute aluminium–silver alloys. In: Philosophical Magazine, 25 (1). pp. 241-246.

Vasu, KI and Sastry, DH and Prasad, YVRK (1969) On the mechanism of plastic flow at 86°k in quenched and aged aluminum. In: Philosophical Magazine , 20 (165). pp. 629-633.

Vathsala, * and Natarajan, KA (1989) Some electrochemical aspects of grinding media corrosion and sphalerite flotation. In: International Journal of Mineral Processing, 26 (3-4). pp. 193-203.

Vaz, DC and Lin, C-C and Plombon, JJ and Choi, WY and Groen, I and Arango, IC and Chuvilin, A and Hueso, LE and Nikonov, DE and Li, H and Debashis, P and Clendenning, SB and Gosavi, TA and Huang, Y-L and Prasad, B and Ramesh, R and Vecchiola, A and Bibes, M and Bouzehouane, K and Fusil, S and Garcia, V and Young, IA and Casanova, F (2024) Voltage-based magnetization switching and reading in magnetoelectric spin-orbit nanodevices. In: Nature Communications, 15 (1).

Veerababu, R and Balamuralikrishnan, R and Karthikeyan, S (2020) Nanoscale clusters in secondary hardening ultra-high strength steels with 1 and 3 wt Mo: An atom probe investigation. In: Journal of Materials Research, 35 (14). pp. 1763-1776.

Veerababu, R and Prasad, K Satya and Karamched, Phani S and Balamuralikrishnan, R and Karthikeyan, S (2018) Austenite stability and M2C carbide decomposition in experimental secondary hardening ultra-high strength steels during high temperature austenitizing treatments. In: MATERIALS CHARACTERIZATION, 144 . pp. 191-204.

Velmanirajan, K and Abu Thaheer, Syed A and Narayanasamy, R and Madhavan, R and Suwas, Satyam (2013) Effect of Annealing Temperature in Al 1145 Alloy Sheets on Formability, Void Coalescence, and Texture Analysis. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1091-1107.

Velmanirajan, K and Anuradha, K and Abu Thaheer, Syed A and Narayanasamy, R and Madhavan, R and Suwas, Satyam (2014) Experimental investigation of forming limit, void coalescence and crystallographic textures of aluminum alloy 8011 sheet annealed at various temperatures. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 14 (3). pp. 398-416.

Venkatachala, BJ and Nath, G (1980) Incompressible boundary layer for longitudinal flow over a cylinder with an applied magnetic field. In: Archiwum Mechaniki Stosowanej, 32 (2). pp. 273-283.

Venkatachalam, P and Roy, Shibayan and Ravisankar, B and Paul, Thomas V and Vijayalakshmi, M and Suwas, Satyam (2011) Texture evolution in an Al-Cu alloy during equal channel angular pressing: the effect of starting microstructure. In: Journal of Materials Science (full set), 46 (20). pp. 6518-6527.

Venkataraman, M and Hajra, JP (1983) Thermodynamics of nickel-manganese alloys using oxide and fluoride electrolytes. In: Metallurgical and Materials Transactions A, 14 (10). pp. 2125-2130.

Venkataraman, M and Hajra, JP (1982) Thermodynamics of cobalt-manganese alloys using fluoride and oxide electrolytes. In: Scripta Metallurgica, 16 (9). pp. 1043-1048.

Venkatasubbu, Devanand G and Ramasamy, S and Avadhani, GS and Palanikumar, L and Kumar, J (2012) Size-mediated cytotoxicity of nanocrystalline titanium dioxide, pure and zinc-doped hydroxyapatite nanoparticles in human hepatoma cells. In: Journal of Nanoparticle Research, 14 (4).

Venkatasubbu, Devanand G and Ramasamy, S and Avadhani, GS and Ramakrishnan, V and Kumar, J (2013) Surface modification and paclitaxel drug delivery of folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles. In: POWDER TECHNOLOGY, 235 . pp. 437-442.

Venkatesan, R and Dwarakadasa, ES and Ravindran, M (2003) Biofilm formation on structural materials in deep sea environments. In: Indian Journal Of Engineering And Materials Sciences, 10 (6). pp. 486-491.

Venkatesan, R and Dwarkadasa, ES and Raghuram, AC (1998) Effect of deep sea environment on the corrosion behaviour of metals and alloys. In: Transactions of the Metal Finishers Association of India, 7 (1). pp. 63-71.

Venkatesan, R and Venkatasamy, MA and Bhaskaran, TA and Dwarakadasa, ES and Ravindran, M (2002) Corrosion of ferrous alloys in deep sea environments. In: British Corrosion Journal, 37 (4). pp. 257-266.

Venkatesan, R and Ramesh, K and Kesavakumar, B and Arul Muthiah, M and Ramasundaram, S and Jossia Joseph, K (2018) Coastal observation by moored buoy system in Indian region. In: Journal of Ocean Technology, 13 (1). pp. 52-70.

Venkatesha, N and Ashwini, R and Poojar, Pavan and Geethanath, Sairam and Srivastava, Chandan (2014) High Value of Proton Relaxivity Achieved by Graphene Oxide-Cobalt Ferrite Nanoparticle Composite: A Potential Contrast Agent in Magnetic Resonance Imaging. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 94 (4). pp. 415-421.

Venkatesha, N and Poojar, Pavan and Ashwini, R and Qurishi, Yasrib and Geethanath, Sairam and Srivastava, Chandan (2016) Ultrafine graphene oxide-CoFe2O4 nanoparticle composite as T-1 and T-2 contrast agent for magnetic resonance imaging. In: RSC ADVANCES, 6 (21). pp. 17423-17429.

Venkatesha, N and Poojar, Pavan and Qurishi, Yasrib and Geethanath, Sairam and Srivastava, Chandan (2015) Graphene oxide-Fe3O4 nanoparticle composite with high transverse proton relaxivity value for magnetic resonance imaging. In: JOURNAL OF APPLIED PHYSICS, 117 (15).

Venkatesha, N and Poojar, Pavan and Qurishi, Yasrib and Geethanath, Sairam and Srivastava, Chandan (2017) Zn1-xGdxS (x=0.1, 0.2 and 0.3) nanoparticles for magnetic resonance imaging and optical fluorescence imaging. In: MATERIALS RESEARCH EXPRESS, 4 (3).

Venkatesha, N and Pudakalakatti, Shivanand M and Qurishi, Yasrib and Atreya, Hanudatta S and Srivastava, Chandan (2015) MnFe2O4-Fe3O4 core-shell nanoparticles as a potential contrast agent for magnetic resonance imaging. In: RSC ADVANCES, 5 (118). pp. 97807-97815.

Venkatesha, N and Qurishi, Yasrib and Atreya, Hanudatta S and Srivastava, Chandan (2016) Effect of core-shell nanoparticle geometry on the enhancement of the proton relaxivity value in a nuclear magnetic resonance experiment. In: RSC ADVANCES, 6 (69). pp. 64605-64610.

Venkatesha, N and Srivastava, Chandan and Hegde, Veena (2014) Synergetic effect of size and morphology of cobalt ferrite nanoparticles on proton relaxivity. In: IET NANOBIOTECHNOLOGY, 8 (4). pp. 184-189.

Venkateshwaran, Balaji and Hajra, JP (1996) A generalized quaternary liquid solution model and its application to the Ga-In-As-P system. In: Materials Science and Engineering B, 41 (3). pp. 362-367.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Bose, AC and Muthupandi, V and Babu, NK and Subramanian, S (2012) Role of electrolyte additives on in-vitro electrochemical behavior of micro arc oxidized titania films on Cp Ti. In: APPLIED SURFACE SCIENCE, 258 (18). pp. 6853-6863.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Bose, AC and Muthupandi, V and Subramanian, S (2013) Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti. In: CERAMICS INTERNATIONAL, 39 (1). pp. 801-812.

Venkateswarlu, K and Rameshbabu, N and Sreekanth, D and Sandhyarani, M and Bose, AC and Muthupandi, V and Subramanian, S (2013) Role of electrolyte chemistry on electronic and in vitro electrochemical properties of micro-arc oxidized titania films on Cp Ti. In: Electrochimica Acta, 105 . pp. 468-480.

Venkatraman, S and Kishore, * (1997) Impact studies in glass epoxy laminates containing foam. In: Journal of Reinforced Plastics and Composites, 16 (7). pp. 618-630.

Venkatraman, S and Kishore, * (1998) Investigations on the role of foam layers in the failure of glass-epoxy composite subjected to repeated impacts. In: Journal of Reinforced Plastics and Composites, 17 (08). pp. 741-751.

Venkatraman, S and Kishore, * (1998) Response to impacts in composites containing foam. In: Journal of Reinforced Plastics and Composites, 17 (14). pp. 1281-1291.

Venkatraman, K and Jayaram, V (2021) Crack velocity measurements through continuous stiffness monitoring of cyclically loaded notched micro-beams of thin graded Pt–Ni-Al bond coats. In: International Journal of Fracture, 227 (1). pp. 15-37.

Venkatraman, Kaustubh and Jayaram, Vikram (2019) Stiffness based technique to probe cyclic damage accumulation in micro-structurally graded bond coats viamicro-beam bending tests. In: PHILOSOPHICAL MAGAZINE, 99 (16). pp. 2016-2050.

Venkatraman, S and Kishore, * (1996) Study of fracture features in foam bearing glass epoxy composites subjected to repeated impacts. In: Bulletin of Materials Science, 19 (6). 1143-1153 .

Venkatraman, S and Kishore, * (1997) The role of the interface in foam-bearing glass-epoxy composites subjected to impact loading. In: Composite Interfaces, 5 (1). pp. 55-67.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304. In: Materials Letters, 17 (6). pp. 388-392.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working. In: Materials Letters, 26 (3). pp. 161-165.

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.

Venugopal, S and Mannan, SL and Prasad, YVRK (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316. In: Journal of Materials Science Letters, 16 (2). pp. 137-142.

Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.

Venugopal, S and Mannan, SL and Prasad, YVRK (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. In: Journal of Nuclear Materials, 227 (1-2). pp. 1-10.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304. In: Journal of Materials Science Letters, 12 (23). pp. 1875-1878.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for mechanical working of stainless steel type AISI 316 L. In: Scripta Metallurgica et Materialia, 28 (6). pp. 715-720.

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Venugopal, S and Tyagi, AK and Krishan, K and Mannan, SL and Prasad, YVRK (1995) Influence of carbide particles on the dynamic recrystallization of as-cast 304 stainless steel: a study using secondary ion mass spectrometric (SIMS) analysis. In: Materials Letters, 25 (5-6). pp. 245-248.

Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.

Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.

Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Comments on the paper entitled “Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1”. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .

Verma, A and Jain, A and Tiwari, A and Saraf, S and Panda, PK and Jain, SK (2021) Promising Antifungal Potential of Engineered Non-ionic Surfactant-Based Vesicles: In Vitro and In Vivo Studies. In: AAPS PharmSciTech, 22 (1).

Verma, A and Tiwari, A and Saraf, S and Panda, P K and Jain, A and Jain, S K (2021) Protein and peptide delivery by chitosan systems. [Book Chapter]

Verma, A and Tiwari, A and Saraf, S and Panda, PK and Jain, A and Jain, SK (2020) Emerging potential of niosomes in ocular delivery. In: Expert Opinion on Drug Delivery . (In Press)

Verma, Akash and Biswas, Krishanu and Tiwary, Chandra Sekhar and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2011) Combined Cryo and Room-Temperature Ball Milling to Produce Ultrafine Halide Crystallites. In: Metallurgical and Materials Transactions A, 42A (4). pp. 1127-1137.

Verma, KK and Kumar, S and Suwas, S (2023) Control of Microstructure and Texture Through Strain Path Change to Improve Tensile Properties of Mg-6.9Sn-2.6Zn (TZ73) Alloy. In: JOM .

Verma, KK and Kumar, S and Suwas, S (2021) Evolution of microstructure and texture during hot rolling and subsequent annealing of the TZ73 magnesium alloy and its influence on tensile properties. In: Materials Science and Engineering A, 821 .

Verma, KK and Suwas, S and Kumar, S (2020) Asymmetric Rolling of TZ73 Magnesium Alloy to Improve Its Ductility. In: Magnesium Technology Symposium held at the 149th Annual Meeting and Exhibition, 23 February 2020 through 27 February 2020, San Diego; United States, pp. 189-196.

Verma, KK and Viswarupachari, CH and Gaddikeri, KM and Ramesh, S and Kumar, S and Bose, S (2021) Unfolding the effects of tuft density on compression after impact properties in unidirectional carbon/epoxy composite laminates. In: Composite Structures, 258 .

Verma, Krishna Kamlesh and Kumar, Subodh and Suwas, Satyam (2018) Evolution of Texture during Hot Rolling of a New Magnesium Alloy. In: 10th International Conference on Processing and Manufacturing of Advanced Materials, 2018, 9-13 July, 2018, Paris; France, pp. 1023-1028.

Verma, Nisha and Cadambi, Sumanth and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. In: ACTA MATERIALIA, 60 (6-7). pp. 3063-3073.

Verma, Nisha and Jayaram, Vikram (2013) Detailed investigation of contact deformation in ZrN/Zr multiplayer-understanding the role of volume fraction, bilayer spacing, and morphology of interfaces. In: JOURNAL OF MATERIALS RESEARCH, 28 (22). pp. 3146-3156.

Verma, Nisha and Jayaram, Vikram (2014) Role of interface curvature on stress distribution under indentation for ZrN/Zr multilayer coating. In: THIN SOLID FILMS, 571 (2). pp. 283-289.

Verma, Nisha and Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN-Zr multilayer coating. In: Journal of Materials Science (full set), 47 (4). pp. 1621-1630.

Verma, SK and Pramanik, A and Jyothsna, K and Vamsi, KV and Karthikeyan, S (2022) Phase Transformation Temperatures, γ–γ′ Lattice Parameter Misfit, and γ′ Precipitate Morphology in Co–Ti–V Alloys. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Victoria, Bhattacharya and Chattopadhyay, K (2001) Frictional characteristics of nano-embedded aluminium alloys. In: Materials Science Forum, 360-362 . pp. 295-300.

Vidya, G and Ramamurthy, PC (2018) Development of New Blue-Light Emitting PPV Block Copolymer: Synthesis, Characterization and Electro-Optical Studies. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Vidyashree, MP and Sushmita, K and Kokila, MK and Bose, S (2022) ‘Template-free’ synthesis of self-assembled micro-spikes resulting in ‘sea-urchin’-like carbon structures for suppressing electromagnetic radiation. In: Materials Advances .

Vidyashree, MP and Sushmita, K and Nagarajan, P and Kokila, MK and Bose, S (2023) Mimicking ‘sea-urchin’ like heirarchical carbon structures self-assembled from carbon fibers for green EMI shielding. In: Chemical Engineering Journal Advances, 13 .

Vijayalakshmi, SP and Raichur, AM (2002) Bioflocculation of high-ash Indian coals using Paenibacillus polymyxa. In: International Journal of Mineral processing, 67 (1-4). pp. 199-210.

Vijayalakshmi, SP and Raichur, AM (2003) The utility of Bacillus subtilis as a bioflocculant for fine coal. In: Colloids and Surfaces B: Biointerfaces, 29 (4). pp. 265-275.

Vijayaraju, K and Dwarakadasa, ES (1986) Computer-aided composition-treatment-structure-property correlation studies in steels. In: Bulletin of Materials Science, 8 (2). pp. 193-198.

Vijayaraju, K and Dwarakadasa, ES and Abboud, Jaafar Hadi (1985) SEM studies of fractures in spinodally hardened Cu-9Ni-6Sn-X alloys. In: Journal of Materials Science Letters, 4 (9). pp. 1111-1114.

Vijayaraju, K and Dwarakadasa, ES and Panchapagesan, TS (1986) Role of vacancies in the ductile fracture of commercially pure aluminum. In: Journal of Materials Science Letters, 5 (10). pp. 1000-1002.

Vikram, RJ and Aramanda, SK and Schliephake, D and Kauffmann, A and Choudhury, A and Heilmaier, M and Suwas, S (2024) Unveiling the Intricacies of a Ductile-Phase Toughened Intermetallic: An In-Depth Exploration of a Eutectic Mo�Si�Ti Alloy and its Mechanical Behavior. In: Advanced Engineering Materials .

Vikram, RJ and Dash, K and Aramanda, SK and Suwas, S (2023) Design of a nickel–cobalt based eutectic high entropy alloy (NiCo)1.7AlCrFe with hierarchical microstructural length scales. In: Philosophical Magazine .

Vikram, RJ and Gaddam, S and Kalsar, R and Acharya, S and Suwas, S (2019) A fractal approach to predict the oxidation and corrosion behavior of a grain boundary engineered low SFE high entropy alloy. In: Materialia, 7 .

Vikram, RJ and Gupta, K and Suwas, S (2021) Design of a new cobalt base nano-lamellar eutectic high entropy alloy. In: Scripta Materialia, 202 .

Vikram, RJ and Murty, BS and Fabijanic, D and Suwas, S (2020) Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1. In: Journal of Alloys and Compounds, 827 .

Vikram, RJ and Verma, SK and Dash, K and Fabijanic, D and Murty, BS and Suwas, S (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Vimalnath, S and Kumar, RV and Carsten, S and Subramanian, S (2019) Bioremediation of Pb(II) ions from aqueous solution using extracellular polymeric substances (EPS) purified from Pseudomonas fluorescens. In: 29th International Mineral Processing Congress, IMPC 2018, 17 - 21 September 2018, Moscow, pp. 3170-3179.

Vimalnath, S and Ravishankar, H and Schwandt, C and Kumar, RV and Subramanian, S (2018) Mechanistic studies on the biosorption of Pb(II) by Pseudomonas aeruginosa. In: WATER SCIENCE AND TECHNOLOGY, 78 (2). pp. 290-300.

Vimalnath, S and Subramanian, S (2018) Studies on the biosorption of Pb(II) ions from aqueous solution using extracellular polymeric substances (EPS) of Pseudomonas aeruginosa. In: COLLOIDS AND SURFACES B-BIOINTERFACES, 172 . pp. 60-67.

Vimalnath, S and Subramanian, S (2018) Studies on the biosorption of Pb(II) ions using Pseudomonas putida. In: Separation Science and Technology (Philadelphia), 53 (16). pp. 2550-2562.

Vinila, NV and Kesavan, AV and Ramamurthy, PC (2017) Notice of Removal: Tuning of molecular energy levels and photovoltaic properties of benzothiadiazole based D-A-D small molecule. Institute of Electrical and Electronics Engineers Inc..

Vinod, Soumya and Tiwary, Chandra Sekhar and Autreto, Pedro Alves da Silva and Taha-Tijerina, Jaime and Ozden, Sehmus and Chipara, Alin Cristian and Vajtai, Robert and Galvao, Douglas S and Narayanan, Tharangattu N and Ajayan, Pulickel M (2014) Low-density three-dimensional foam using self-reinforced hybrid two-dimensional atomic layers. In: NATURE COMMUNICATIONS, 5 .

Vinoth, R and Babu, Ganesh S and Bharti, Vishal and Gupta, V and Navaneethan, M and Bhat, Venkataprasad S and Muthamizhchelvan, C and Ramamurthy, Praveen C and Sharma, Chhavi and Aswal, Dinesh K and Hayakawa, Yasuhiro and Neppolian, B (2017) Ruthenium based metallopolymer grafted reduced graphene oxide as a new hybrid solar light harvester in polymer solar cells. In: SCIENTIFIC REPORTS, 7 .

Violette, Aurelie and Riotte, Jean and Braun, Jean-Jacques and Oliva, Priscia and Marechal, Jean-Christophe and Sekhar, M and Jeandel, Catherine and Subramanian, S and Prunier, Jonathan and Barbiero, Laurent and Dupre, Bernard (2010) Formation and preservation of pedogenic carbonates in South India, links with paleo-monsoon and pedological conditions: Clues from Sr isotopes, U-Th series and REEs. In: Geochimica et Cosmochimica Acta, 74 (24). pp. 7059-7085.

Vishal, Badri and Singh, Rajendra and Chaturvedi, Abhishek and Sharma, Ankit and Sreedhara, M B and Sahu, Rajib and Bhat, Usha and Ramamurty, Upadrasta and Datta, Ranjan (2018) Chemically stabilized epitaxial wurtzite-BN thin film. In: SUPERLATTICES AND MICROSTRUCTURES, 115 . pp. 197-203.

Vishnu, G and Singh, S and Kumar Naik, TSS and Viswanath, R and Ramamurthy, PC and Bhadrecha, P and Bhojya Naik, HS and Singh, J and Khan, NA and Zahmatkesh, S (2023) Photodegradation of methylene blue dye using light driven photocatalyst-green cobalt doped cadmium ferrite nanoparticles as antibacterial agents. In: Journal of Cleaner Production, 404 .

Vishnu, J and Praveenkumar, K and Anil Kumar, A and Nair, A and Arjun, R and Gopakumar Pillai, V and Shankar, B and V Shankar, K (2025) Multifunctional zinc oxide loaded stearic acid surfaces on biodegradable magnesium WE43 alloy with hydrophobic, self-cleaning and biocompatible attributes. In: Applied Surface Science, 680 .

Vishnumurthy, KA and Kesavan, AV and Swathi, SK and Ramamurthy, PC (2020) Low band gap thienothiophene-diketopyrrolopyrole copolymers with V2O5 as hole transport layer for photovoltaic application. In: Optical Materials, 109 .

Vishwas, M and Rao, Narasimha K and Chakradhar, RPS and Raichur, Ashok M (2014) Effect of film thickness and annealing on optical properties of TiO2 thin films and electrical characterization of MOS capacitors. In: JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 25 (10). pp. 4495-4500.

Viswanath, B and Raghavan, R and Gurao, NP and Ramamurty, U and Ravishankar, N (2008) Mechanical properties of tricalcium phosphate single crystals grown by molten salt synthesis. In: ACTA BIOMATERIALIA, 4 (5). pp. 1448-1454.

Viswanath, B and Shastry, VV and Ramamurty, U and Ravishankar, N (2010) Effect of calcium deficiency on the mechanical properties of hydroxyapatite crystals. In: Acta Materialia, 58 (14). pp. 4841-4848.

Viswanathan, GB and Karthikeyan, S and Sarosi, PM and Unocic, RR and Mills, MJ (2006) Microtwinning during intermediate temperature creep of polycrystalline Ni-based superalloys: mechanisms and modelling. In: Philosophical Magazine, 86 (29-31). pp. 4823-4840.

Viswanathan, NN and Lahiri, AK and Srinivasan, MN (1998) Scientific rationale toward cupola design. In: 101st Casting Congress of the American-Foundrymens-Society, 20-23 Apr. 1997, Seattle, Washington.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1997) Mathematical modelling of divided blast cupola. In: Steel Research, 68 (5). pp. 192-197.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1998) Post combustion in cupola for pollution control. In: 101st Casting Congress of the American-Foundrymens-Society, Apr 20-23, 1997, Seattle, Washington.

Viswanathan, NN and Srinivasan, MN and Lahiri, AK (1998) Process simulation of cupola. In: ISIJ International, 38 (10). pp. 1062-1068.

Viswanathan, VN and Kesavan, AV and Ramamurthy, PC (2022) Enhancement in the inherent photostability of small molecule-based BHJ device by molecular architecturing. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 283 .

Viswanathan, VN and Rao, AD and Pandey, UK and Kesavan, AV and Ramamurthy, PC (2017) Molecular-level architectural design using benzothiadiazole-based polymers for photovoltaic applications. In: Beilstein Journal of Organic Chemistry, 13 . pp. 863-873.

Viswanathan, Vinila Nellissery and Ferguson, Andrew J and Pfeilsticker, Jason R and Larson, Bryon W and Garner, Logan E and Brook, Colin P and Strauss, Steven H and Boltalina, Olga V and Ramamurthy, Praveen C and Braunecker, Wade A (2018) Strategic fluorination of polymers and fullerenes improves photostability of organic photovoltaic blends. In: ORGANIC ELECTRONICS, 62 . pp. 685-694.

Vitta, S (1989) Structure and electron transport anomalies in InSe-In6Se 7 composite. In: Journal of Applied Physics, 66 (12). pp. 5885-5889.

Vlach, KC and Salas, O and Ni, H and Jayaram, V and Levi, CG and Mehrabian, R (1991) A thermogravimetric study of the oxidative growth of Al2O3/Al alloy composites. In: Journal of Materials Research, 6 (9). pp. 1982-1995.

Volz, N and Xue, F and Zenk, CH and Bezold, A and Gabel, S and Subramanyam, APA and Drautz, R and Hammerschmidt, T and Makineni, SK and Gault, B and Göken, M and Neumeier, S (2021) Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy. In: Acta Materialia, 214 .

Von Gratowski, S and Nagaraja, VS and Nithya, G and Kumar, P and Wang, Z and Li, L and Song, Z and Irzhak, A and Lega, P and Frolov, A and Orlov, A and Koledov, V (2019) Study of the sticking effects during mechanical nano-manipulation using shape memory nanotools. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale,, 4 - 8 August 2019, Zhenjiang, China, pp. 130-133.

Vura, Sandeep and Kumar, Anil PS and Senyshyn, Anatoliy and Ranjan, Rajeev (2014) Magneto-structural study of the multiferroic BiFeo(3)-SrTiO3. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 365 . pp. 76-82.

Vyas, A and Aliyu, A (2023) Structural and mechanical properties of Si-doped CrN coatings deposited by magnetron sputtering technique. In: Heliyon, 9 (2).

Vyas, A and Aliyu, A and Tsui, GC-P (2024) Impact of carbon content on the phase structure and mechanical properties of TiBCN coatings via direct current magnetron sputtering. In: Walter de Gruyter GmbH, 63 (1).

von Seggern, Falk and Keskin, Inna and Koos, Erin and Kruk, Robert and Hahn, Horst and Dasgupta, Subho (2016) Temperature-Dependent Performance of Printed Field-Effect Transistors with Solid Polymer Electrolyte Gating. In: ACS Applied Materials & Interfaces, 8 (46). pp. 31757-31763.

W

Waghmare, A and Sharma, V and Shinde, P and Shah, S and Punde, A and Hase, Y and Bade, B and Doiphode, V and Rahane, S and Ladhane, S and Prasad, M and Rondiya, S and Jadkar, S (2023) MoO3/γ-In2Se3 heterostructure photoanodes for enhanced photoelectrochemical water splitting. In: Journal of Materials Science: Materials in Electronics, 34 (14).

Wagner, M F-X and Nayan, N and Ramamurty, U (2008) Healing of fatigue damage in NiTi shape memory alloys. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 41 (18). pp. 185408-4.

Wagner, MF-X and Nayan, N and Ramamurty, U (2008) Healing of fatigue damage in NiTi shape memory alloys. In: Journal of Physics D: Applied Physics, 41 (18). 185408-1-185408-4.

Waidi, YO and Debnath, S and Datta, S and Chatterjee, K (2024) 3D-Printed Silk Proteins for Bone Tissue Regeneration and Associated Immunomodulation. In: Biomacromolecules .

Waidi, YO and Jain, N (2024) Unlocking new possibilities: application of MXenes in 3D bioprinting for advanced therapy. In: Nanoscale .

Waidi, YO and Jain, N and Chowdhury, S and Barua, R and Das, S and Prasad, A and Datta, S (2024) Challenges and Perspective of Manufacturing Techniques in Biomedical Applications. [Book Chapter]

Waidi, YO and Kariim, I and Datta, S (2024) Bioprinting of gelatin-based materials for orthopedic application. In: Frontiers in Bioengineering and Biotechnology, 12 .

Walia, S and Singh, AK and Rao, VSG and Bose, S and Kulkarni, GU (2020) Metal mesh-based transparent electrodes as high-performance EMI shields. In: Bulletin of Materials Science, 43 (1).

Wang, Chao and Cao, Qing Ping and Wang, Xiao Dong and Zhang, Dong Xian and Ramamurty, Upadrasta and Narayan, Ramasubramanian Lakshmi and Jiang, Jian-Zhong (2017) Intermediate Temperature Brittleness in Metallic Glasses. In: ADVANCED MATERIALS, 29 (14, SI).

Wang, Cunshan and Gao, Linhui and Li, Gang and Wang, Yanfang and Xia, Yuanliang and Bysakh, S and Dong, Chuang (2003) Laser-induced self-propagating reaction synthesis of amorphous-based composite Zr-Al-Ni-Cu alloys. In: Journal of Materials Science, 38 (7). pp. 1377-1381.

Wang, RM and Surappa, KM and Tao, CH and Li, CZ and Yan, MG (1998) Microstructure and interface structure studies of SiCp-reinforced Al (6061) metal-matrix composites. In: Materials Science and Engineering: A, 252 (1-2). pp. 219-226.

Wang, Z and Mishra, TP and Xie, W and Deng, Z and Gautam, GS and Cheetham, AK and Canepa, P (2023) Kinetic Monte Carlo Simulations of Sodium Ion Transport in NaSICON Electrodes. In: ACS Materials Letters, 5 (9). pp. 2499-2507.

Wang, Z and Park, S and Deng, Z and Carlier, D and Chotard, J-N and Croguennec, L and Gautam, GS and Cheetham, AK and Masquelier, C and Canepa, P (2022) Phase stability and sodium-vacancy orderings in a NaSICON electrode. In: Journal of Materials Chemistry A, 10 (1). pp. 209-217.

Wang, Zixing and Kochat, Vidya and Pandey, Prafull and Kashyap, Sanjay and Chattopadhyay, Soham and Samanta, Atanu and Sarkar, Suman and Manimunda, Praveena and Zhang, Xiang and Asif, Syed and Singh, Abhisek K and Chattopadhyay, Kamanio and Tiwary, Chandra Sekhar and Ajayan, Pulickel M (2017) Metal Immiscibility Route to Synthesis of Ultrathin Carbides, Borides, and Nitrides. In: ADVANCED MATERIALS, 29 (29).

Wani, WA and Pathan, S and Bose, S (2021) The Journey of Alternative and Sustainable Substitutes for �Single-Use� Plastics. In: Advanced Sustainable Systems .

Warthi, Nilesh and Ghosh, Pradipta and Chokshi, Atul H (2013) Approaching theoretical strengths by synergistic internal and external size refinement. In: SCRIPTA MATERIALIA, 68 (5). pp. 225-228.

Waseda, Y and Chen, HS and Jacob, KT and Shibata, H (2007) Relation between Local Structure and Glass Forming Ability of Liquid Alloys. In: High Temperature Materials and Processes, 26 (5-6). pp. 403-416.

Waseda, Y and Jacob, KT (1981) Computation of thermodynamic properties of liquid ferrous alloys from structural measurements. In: Arch. Eisenhuttenwesen, 52 . pp. 131-136.

Waseda, Y and Jacob, KT (1983) Electron charge transfer in liquid copper tin alloys. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1748-1750.

Waseda, Y and Jacob, KT (1981) Refinement of the correlation between isothermal compressibility and surface tension of liquid metals. In: physica status solidi (a), 68 (2). K117-K122.

Waseda, Y and Jacob, KT (1979) A comparison of the structure of liquid alloys derived from thermodynamic and diffraction studies. In: Metallurgical and Materials Transactions B, 10 (3). pp. 453-455.

Waseda, Y and Jacob, KT and Iguchi, Y and Narushima, T (1994) Theoretical estimation of the effect of minor elements on the solubility of oxygen in silicon melt. In: Journal of Crystal Growth, 139 (3-4). pp. 357-362.

Waseda, Y and Jacob, KT and Tamaki, S and Tsuchiya, Y (1978) Vapor pressure of liquid metals and alloys. In: Zeitschrift Naturforschung Teil A, 33 (8). pp. 940-945.

Waseda, Y and Tamaki, S and Jacob, KT (1984) Current views on microscopic thermodynamics of liquid alloys. In: High Temperature Material Processes, 6 (3-4). pp. 119-141.

Waseda, Y and Ueno, S and Jacob, KT (1989) Theoretical treatment of vapour pressures for liquid metals. In: Journal of Materials Science Letters, 8 (7). 857 -861.

Waseda, Yoshio and Chen, Ho-Sou and Jacob, Kallarackel Thomas and Shibata, Hiroyuki (2008) On the glass forming ability of liquid alloys. In: SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 9 (2). 023003-023017.

Waseda , Y and Jacob, KT and Tamaki, S (1979) Heat of Mixing and Activities in Liquid Al-Sn Alloys. In: Zeitschrift Naturforschung Teil A, 34 (3). pp. 320-324.

Wazalwar, R and Raichur, AM (2021) Model-free cure kinetics of tetra-functional epoxy reinforced with GO and p-Phenylenediamine modified GO. In: Thermochimica Acta, 697 .

Wazalwar, R and Sahu, M and Raichur, AM (2021) Mechanical properties of aerospace epoxy composites reinforced with 2D nano-fillers: current status and road to industrialization. In: Nanoscale Advances, 3 (10). pp. 2741-2776.

Wazalwar, R and Tripathi, M and Raichur, AM (2022) Curing Behavior and Mechanical Properties of Tetra-Functional Epoxy Reinforced with Polyethyleneimine-Functionalized MXene. In: ACS Applied Polymer Materials, 4 (4). pp. 2573-2584.

Wazalwar, R and Tripathi, N and Raichur, AM (2021) Mechanical and curing behavior of epoxy composites reinforced with polystyrene-graphene oxide (PS-GO) core-shell particles. In: Composites Part C: Open Access, 5 .

Waziers, Segolene de and Roy, S and Satyam Suwas, S and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Solidification Microstructure and Texture in Grain-refined Titanium alloys. In: Texture and Microstructure of Steels and Some Other Materials, 2009, London.

Wexler, RB and Sai Gautam, G and Bell, RT and Shulda, S and Strange, NA and Trindell, JA and Sugar, JD and Nygren, E and Sainio, S and McDaniel, AH and Ginley, D and Carter, EA and Stechel, EB (2023) Multiple and nonlocal cation redox in Ca-Ce-Ti-Mn oxide perovskites for solar thermochemical applications. In: Energy and Environmental Science, 16 (6). pp. 2550-2560.

Wheeler, JM and Thilly, L and Zou, Y and Morel, A and Raghavan, R and Michler, J (2020) The effect of dislocation nature on the size effect in Indium Antimonide above and below the brittle-ductile transition. In: MRS Advances, 5 (33-34). pp. 1811-1818.

Wu, G and Dash, K and Galano, M L and O'Reilly, K A Q (2019) Oxidation studies of Al alloys: Part I Al-Cu (liquid phase) alloy. In: CORROSION SCIENCE, 157 . pp. 41-50.

Wu, G and Dash, K and Galano, ML and O'Reilly, KAQ (2019) Oxidation studies of Al alloys: Part II Al-Mg alloy. In: CORROSION SCIENCE, 155 . pp. 97-108.

Wu, Jingjie and Yadav, Ram Manohar and Liu, Mingjie and Sharma, Pranav P and Tiwary, Chandra Sekhar and Ma, Lulu and Zou, Xiaolong and Zhou, Xiao-Dong and Yakobson, Boris I and Lou, Jun and Ajayan, Pulickel M (2015) Achieving Highly Efficient, Selective, and Stable CO2 Reduction on Nitrogen-Doped Carbon Nanotubes. In: ACS NANO, 9 (5). pp. 5364-5371.

X

Xavier, Priti and Bharati, Avanish and Madras, Giridhar and Bose, Suryasarathi (2014) An unusual demixing behavior in PS-PVME blends in the presence of nanoparticles. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (39). pp. 21300-21309.

Xavier, Priti and Bose, Suryasarathi (2014) Confinement effects of MWNTs on the chain dynamics in dynamically asymmetric polymer blend PS/PVME polystyrene/poly (vinyl methyl ether)]. In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 248 .

Xavier, Priti and Bose, Suryasarathi (2014) Electromagnetic shielding materials and coatings derived from gelation of multiwall carbon nanotubes in an LCST mixture. In: RSC ADVANCES, 4 (98). pp. 55341-55348.

Xavier, Priti and Bose, Suryasarathi (2015) Mapping the intriguing transient morphologies and the demixing behavior in PS/PVME blends in the presence of rod-like nanoparticles. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (22). pp. 14972-14985.

Xavier, Priti and Bose, Suryasarathi (2013) Multiwalled-carbon-nanotube-induced miscibility in near-critical PS/PVME blends: assessment through concentration fluctuations and segmental relaxation. In: Journal of Physical Chemistry B, 117 (28). pp. 8633-8646.

Xavier, Priti and Bose, Suryasarathi (2016) Nanomechanical Mapping, Hierarchical Polymer Dynamics, and Miscibility in the Presence of Chain-End Grafted Nanoparticles. In: MACROMOLECULES, 49 (3). pp. 1036-1048.

Xavier, Priti and Bose, Suryasarathi (2016) Nanomechanical Mapping, Hierarchical Polymer Dynamics, and Miscibility in the Presence of Chain-End Grafted Nanoparticles. In: MACROMOLECULES, 49 (3). pp. 1036-1048.

Xavier, Priti and Bose, Suryasarathi (2014) Non-equilibrium segmental dynamics driven by multiwall carbon nanotubes in PS/PVME blends. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (20). pp. 9309-9316.

Xavier, Priti and Jain, Shubham and Srinivas, Vijay T and Chatterjee, Kaushik and Bose, Suryasarathi (2015) Designer porous antibacterial membranes derived from thermally induced phase separation of PS/PVME blends decorated with an electrospun nanofiber scaffold. In: RSC ADVANCES, 6 (13). pp. 10865-10872.

Xavier, Priti and Nair, Keerthi M and Lasitha, K and Bose, Suryasarathi (2016) Is kinetic polymer arrest very specific to multiwalled carbon nanotubes? In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (42). pp. 29226-29238.

Xavier, Priti and Rao, Praveen and Bose, Suryasarathi (2016) Nanoparticle induced miscibility in LCST polymer blends: critically assessing the enthalpic and entropic effects. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (1). pp. 47-64.

Xavier, Priti and Sharma, Keshav and Elayaraja, K and Vasu, KS and Sood, AK and Bose, Suryasarathi (2014) Reduced graphene oxide induced phase miscibility in polystyrene-poly(vinyl methyl ether) blends. In: RSC ADVANCES, 4 (24). pp. 12376-12387.

Xu, J and Ramamurty, U and Ma, E (2010) The fracture toughness of bulk metallic glasses. In: Journal of the Minerals Metals & Materials Society (JOM), 62 (4). pp. 10-18.

Y

Yadav, A and Singh, AP and Srivastava, C (2024) Optimization of pulse electrodeposition parameters for enhanced resistance to corrosion and hydrogen permeation of zinc coatings. In: Materialia, 38 .

Yadav, P and Samanta, K and Arya, V and Biswas, D and Kim, H-S and Bakli, C and Jung, HY and Ghosh, D (2024) A 2.5Â V In-Plane Flexi-Pseudocapacitor with Unprecedented Energy and Cycling Efficiency for All-Weather Applications. In: Small, 20 .

Yadav, P and Shah, R and Roy, A and Jani, S and Chatterjee, K and Saini, DK (2023) Cellular Senescence Program is Sensitive to Physical Differences in Polymeric Tissue Scaffolds. In: ACS Materials Au .

Yadav, Surekha and Sarkar, S and Aggarwal, Akash and Kumar, Arvind and Biswas, Krishanu (2018) Wear and mechanical properties of novel (CuCrFeTiZn)(100-x)Pb-x high entropy alloy composite via mechanical alloying and spark plasma sintering. In: WEAR, 410 . pp. 93-109.

Yadav, TP and Kumbhakar, P and Mukhopadhyay, NK and Galvao, DS and Ajayan, PM and Ranganathan, S and Chattopadhyay, K and SekharTiwary, C (2022) Revisiting Quasicrystals for the Synthesis of 2D Metals. In: Transactions of the Indian Institute of Metals .

Yadav, TP and Woellner, CF and Sharifi, T and Sinha, SK and Qu, L-L and Apte, A and Mukhopadhyay, NK and Srivastava, ON and Vajtai, R and Galvão, DS and Tiwary, CS and Ajayan, PM (2020) Extraction of Two-Dimensional Aluminum Alloys from Decagonal Quasicrystals. In: ACS Nano, 14 (6). pp. 7435-7443.

Yadav, Thakur Prasad and Woellner, Cristiano F and Sinha, Shyam K and Sharifi, Tiva and Apte, Amey and Mukhopadhyay, Nilay Krishna and Srivastava, Onkar Nath and Vajtai, Robert and Galvao, Douglas S and Tiwary, Chandra Sekhar and Ajayan, Pulickel M (2018) Liquid Exfoliation of Icosahedral Quasicrystals. In: ADVANCED FUNCTIONAL MATERIALS, 28 (26).

Yaddanapudi, Krishna and Saha, Sabyasachi and Raghavan, Srinivasan and Muraleedharan, K and Banerjee, Dipankar (2018) Nitridation of Sapphire as a Precursor to GaN Growth: Structure and Chemistry. In: CRYSTAL GROWTH & DESIGN, 18 (9). pp. 4978-4986.

Yamakawa, K and Trolier‐McKinstry, S and Dougherty, JP and Krupanidhi, SB (1995) Reactive magnetron co?sputtered antiferroelectric lead zirconate thin films. In: Applied Physics Letters, 67 (14). pp. 2014-2016.

Yang, Xianfeng and Karthik, Chinnathambi and Li, Xiuyan and Fu, Junxiang and Fu, Xionghui and Liang, Chaolun and Ravishankar, N and Wu, Mingmei and Ramanath, Ganapathiraman (2009) Oriented Nanocrystal Arrays of Selectable Polymorphs by Chemical Sculpture. In: Chemistry Of Materials, 21 (14). pp. 3197-3201.

Yashwanth, HJ and Hareesh, K and Rondiya, SR and Choudhary, RJ and Dhole, SD (2024) The borophene quantum dots scaffolded TiO2 nanocomposite as an efficient photo electrocatalyst for water splitting application. In: Applied Surface Science, 646 .

Yashwanth, HJ and Rondiya, SR and Dzade, NY and Hoye, RLZ and Choudhary, RJ and Phase, DM and Dhole, SD and Hareesh, K (2022) Improved photocatalytic activity of TiO2 nanoparticles through nitrogen and phosphorus co-doped carbon quantum dots: an experimental and theoretical study. In: Physical Chemistry Chemical Physics .

Yazar, KU and Bahl, S and Mishra, S and Sahu, VK and Bhattacharjee, A and Banerjee, D and Suwas, S (2023) Microcrack formation under normal and dwell fatigue of IMI 834. In: International Journal of Fatigue, 175 .

Yazar, KU and Bhattacharjee, A and Suwas, S (2022) Effect of Thermomechanical Processing on the Dwell Fatigue Behaviour of Near Alpha Titanium Alloy IMI 834. In: JOM .

Yazar, KU and Mishra, S and Karmakar, A and Bhattacharjee, A and Suwas, S (2020) On the Temperature Sensitivity of Dwell Fatigue of a Near Alpha Titanium Alloy: Role of Strain Hardening and Strain Rate Sensitivity. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Yazar, KU and Mishra, S and Kumar, L and Bahl, S and Kumar, TK and Suwas, S (2022) Texture induced planar anisotropy of dwell fatigue response in titanium: Insights from experiments and crystal plasticity simulations. In: International Journal of Plasticity, 152 .

Yazar, KU and Mishra, Sumeet and Narasimhan, K and Date, PP (2018) Deciphering the deformation mechanism in single point incremental forming: experimental and numerical investigation. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101 (9-12). pp. 2355-2366.

Yazar, KU and Shamitha, M and Suwas, S (2021) Texture-dependent dwell fatigue response of titanium. In: Philosophical Magazine, 101 (12). pp. 1443-1470.

Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A & B, 46 (3). pp. 507-519.

Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A, 46 (3). pp. 507-509.

Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Crystallographic texture and hardness in work softened and annealed cadmium — 1% silver alloy. In: Scripta Metallurgica, 12 (6). 487-492 .

Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Effect of grain size and texture on the mechanical properties of warm worked cadmium-1.5 Pct zinc alloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 9 (9). 1311-1316 .

Yoo, Byung-Gil and Park, Kyoung-Won and Lee, Jae-Chul and Ramamurty, U and Jang, Jae-il (2009) Role of free volume in strain softening of as-cast and annealed bulk metallic glass. In: Journal of material research, 24 (4). pp. 1405-1416.

Yoo, Byung-Gil and Choi, In-Chul and Kim, Yong-Jae and Ramamurty, Upadrasta and Jang, Jae-il (2013) Room-temperature anelasticity and viscoplasticity of Cu-Zr bulk metallic glasses evaluated using nanoindentation. In: Materials Science and Engineering: A, 577 . pp. 101-104.

Yoo, Byung-Gil and Choi, In-Chul and Kim, Yong-Jae and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2012) Further evidence for room temperature, indentation-induced nanocrystallization in a bulk metallic glass. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 545 . pp. 225-228.

Yoo, Byung-Gil and Kim, Ju-Young and Kim, Yong-Jae and Choi, In-Chul and Shim, Sanghoon and Tsui, Ting Y. and Bei, Hongbin and Ramamurty, Upadrasta and Jang, Jae-il (2012) Increased time-dependent room temperature plasticity in metallic glass nanopillars and its size-dependency. In: INTERNATIONAL JOURNAL OF PLASTICITY, 37 . pp. 108-118.

Yoo, Byung-Gil and Kim, Kyu-Sik and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2010) Room temperature creep in amorphous alloys: Influence of initial strain and free volume. In: Scripta Materialia, 63 (12). pp. 1205-1208.

Yoo, Byung-Gil and Kim, Yong-Jae and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2009) On the hardness of shear bands in amorphous alloys. In: Scripta Materialia, 61 (10). pp. 951-954.

Yoon, Sang-Won and Seo, Jong-Hyun and Chae, Keun-Hwa and Park, Jong-Keuk and Song, Jong-Han and Jayaram, Vickram and Lee, Kon-Bae and Seong, Tae-Yeon and Hoon-Kwon, * and Ahn, Jae-Pyoung (2012) The Effects of Nitrogen Bonding on Hardness of AIN/CrN Multilayer Hard Coatings. In: International Conference on Electronic Materials (IUMRS-ICEM), AUG 22-27, 2010, Seoul, SOUTH KOREA, pp. 1476-1479.

Yu, Fuxiao and Dwarakadasa, DS and Ranganathan, S (2003) Microstructure and mechanical properties of spray-formed Al-Si-Pb alloys. In: Journal of Materials Processing Technology, 137 (1-3). pp. 164-167.

Yuan, Q and Chauhan, A and Gaganidze, E and Aktaa, J (2022) Dislocation loop coarsening and shape evolution upon annealing neutron-irradiated RAFM steel. In: Journal of Nuclear Materials, 558 .

Yuan, Q and Chauhan, A and Gaganidze, E and Aktaa, J (2022) Dislocation loop coarsening and shape evolution upon annealing neutron-irradiated RAFM steel. In: Journal of Nuclear Materials, 558 .

Yuan, Q and Chauhan, A and Gaganidze, E and Aktaa, J (2022) In-situ TEM investigations of dislocation loop annealing kinetics in neutron-irradiated 9Cr RAFM steel. In: Journal of Nuclear Materials, 558 .

Yuan, Q and Chauhan, A and Gaganidze, E and Aktaa, J (2022) In-situ TEM investigations of dislocation loop annealing kinetics in neutron-irradiated 9Cr RAFM steel. In: Journal of Nuclear Materials, 558 .

Yukthesh Venkat, S and Roohan Farooq Lala, S and Singh, AP and Srivastava, C (2023) Molybdenum Concentration-Induced Texture and Grain Boundary Engineering of Electrodeposited Tin-Molybdenum Coatings for Enhanced Corrosion Resistance. In: Journal of Electronic Materials .

Z

Zachariah, Z and Tatiparti, Sankara Sarma V and Mishra, SK and Ramakrishnan, N and Ramamurty, U (2013) Tension-compression asymmetry in an extruded Mg alloy AM30: temperature and strain rate effects. In: Materials Science and Engineering: A, 572 . pp. 8-18.

Zhang, DL and Chattopadhyay, K and Cantor, B (1991) Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix. In: Journal of Materials Science (full set), 26 (6). pp. 1531-1544.

Zhao, Yakai and Choi, In-Chul and Seok, Moo-Young and Kim, Min-Hyun and Kim, Do-Hyang and Ramamurty, Upadrasta and Suh, Jin-Yoo and Jang, Jae-il (2014) Effect of hydrogen on the yielding behavior and shear transformation zone volume in metallic glass ribbons. In: ACTA MATERIALIA, 78 . pp. 213-221.

Zhao, Yakai and Choi, In-Chul and Seok, Moo-Young and Ramamurty, Upadrasta and Suh, Jin-Yoo and Jang, Jae-il (2014) Hydrogen-induced hardening and softening of Ni-Nb-Zr amorphous alloys: Dependence on the Zr content. In: SCRIPTA MATERIALIA, 93 . pp. 56-59.

Zhao, Yakai and Lee, Dong-Hyun and Kim, Woo-Jin and Seok, Moo-Young and Kim, Ju-Young and Han, Heung Nam and Suh, Jin-Yoo and Ramamurty, Upadrasta and Jang, Jae-il (2018) Influence of pre-strain on the gaseous hydrogen embrittlement resistance of a high-entropy alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 718 . pp. 43-47.

Zhao, Yakai and Lee, Dong-Hyun and Lee, Jung-A and Kim, Woo-Jin and Han, Heung Nam and Ramamurty, Upadrasta and Suh, Jin-Yoo and Jang, Jae-il (2017) Hydrogen-induced nanohardness variations in a CoCrFeMnNi high-entropy alloy. In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 42 (16). pp. 12015-12021.

Zhao, Yakai and Lee, Dong-Hyun and Seok, Moo-Young and Lee, Jung-A and Phaniraj, MP and Suh, Jin-Yoo and Ha, Heon-Young and Kim, Ju-Young and Ramamurty, Upadrasta and Jang, Jae-il (2017) Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement. In: Scripta Materialia, 135 . pp. 54-58. ISSN 13596462

Zhao, Yakai and Seok, Moo-Young and Choi, In-Chul and Lee, Yun-Hee and Park, Seong-Jun and Ramamurty, Upadrasta and Suh, Jin-Yoo and Jang, Jae-il (2015) The role of hydrogen in hardening/softening steel: Influence of the charging process. In: SCRIPTA MATERIALIA, 107 . pp. 46-49.

Zheng, Y and Banerjee, R and Wang, Y and Fraser, H and Banerjee, D (2022) Pathways to Titanium Martensite. In: Transactions of the Indian Institute of Metals, 75 (4). pp. 1051-1068.

Zheng, Yufeng and Alam, Talukder and Banerjee, Rajarshi and Banerjee, Dipankar and Fraser, Hamish L (2018) The influence of aluminum and oxygen additions on intrinsic structural instabilities in titanium-molybdenum alloys. In: SCRIPTA MATERIALIA, 152 . pp. 150-153.

Zheng, Yufeng and Antonov, Stoichko and Feng, Qiang and Banerjee, Rajarshi and Banerjee, Dipankar and Fraser, Hamish L (2019) Shuffle-induced modulated structure and heating-induced ordering in the metastable beta-titanium alloy, Ti-5Al-5Mo-5V-3Cr. In: SCRIPTA MATERIALIA, 176 . pp. 7-11.

Zheng, Yufeng and Banerjee, Dipankar and Fraser, Hamish L (2015) A nano-scale instability in the beta phase of dilute Ti-Mo alloys. In: SCRIPTA MATERIALIA, 116 . pp. 131-134.

Zheng, Yufeng and Williams, Robert EA and Nag, Soumya and Banerjee, Rajarshi and Fraser, Hamish L and Banerjee, Dipankar (2015) The effect of alloy composition on instabilities in the beta phase of titanium alloys. In: SCRIPTA MATERIALIA, 116 . pp. 49-52.

Zhong, C and Zhang, H and Cao, QP and Wang, XD and Zhang, DX and Ramamurty, U and Jiang, JZ (2016) Deformation behavior of metallic glasses with shear band like atomic structure: a molecular dynamics study. In: Scientific Reports, 6 .

Zhong, C and Zhang, H and Cao, QP and Wang, XD and Zhang, DX and Ramamurty, U and Jiang, JZ (2016) On the critical thickness for non-localized to localized plastic flow transition in metallic glasses: A molecular dynamics study. In: SCRIPTA MATERIALIA, 114 . pp. 93-97.

Zhong, C and Zhang, H and Cao, QP and Wang, XD and Zhang, DX and Ramamurty, U and Jiang, JZ (2016) Size distribution of shear transformation zones and. their evolution towards the formation of shear bands in metallic glasses. In: JOURNAL OF NON-CRYSTALLINE SOLIDS, 445 . pp. 61-68.

Zhou, R and Pang, KH and Bisht, A and Roy, A and Suwas, S and Silberschmidt, VV (2020) Modelling strain localization in Ti–6Al–4V at high loading rate: A phenomenological approach. In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 378 (2162).

This list was generated on Thu Nov 21 14:22:39 2024 IST.