High temperature deformation processing maps for boron modified Ti-6Al-4V alloys

Sen, Indrani and Kottada, Ravi Sankar and Ramamurty, U (2010) High temperature deformation processing maps for boron modified Ti-6Al-4V alloys. In: Materials Science and Engineering A, 527 (23). pp. 6157-6165.

PDF high.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy

Abstract

The alloy, Ti-6Al-4V is an alpha + beta Ti alloy that has large prior beta grain size (similar to 2 mm) in the as cast state. Minor addition of B (about 0.1 wt.%) to it refines the grain size significantly as well as produces in-situ TiB needles. The role played by these microstructural modifications on high temperature deformation processing maps of B-modified Ti64 alloys is examined in this paper.Power dissipation efficiency and instability maps have been generated within the temperature range of 750-1000 degrees C and strain rate range of 10(-3)-10(+1) s(-1). Various deformation mechanisms, which operate in different temperature-strain rate regimes, were identified with the aid of the maps and complementary microstructural analysis of the deformed specimens. Results indicate four distinct deformation domains within the range of experimental conditions examined, with the combination of 900-1000 degrees C and 10(-3)-10(-2) s(-1) being the optimum for hot working. In that zone, dynamic globularization of alpha laths is the principle deformation mechanism. The marked reduction in the prior beta grain size, achieved with the addition of B, does not appear to alter this domain markedly. The other domains, with negative values of instability parameter, show undesirable microstructural features such as extensive kinking/bending of alpha laths and breaking of beta laths for Ti64-0.0B as well as generation of voids and cracks in the matrix and TiB needles in the B-modified alloys. (C) 2010 Elsevier B.V. All rights reserved.

Item Type:	Journal Article
Publication:	Materials Science and Engineering A
Publisher:	Elsevier Science
Additional Information:	Copyright of this article belongs to Elsevier Science.
Keywords:	Titanium alloys;Electron microscopy;Thermomechanical processing;Recrystallization.
Department/Centre:	Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	15 Sep 2010 11:42
Last Modified:	19 Sep 2010 06:16
URI:	http://eprints.iisc.ac.in/id/eprint/32126

Actions (login required)

View Item