ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites

Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites. In: Journal of Materials Research, 15 (5). pp. 1145-1153.

Full text not available from this repository. (Request a copy)
Official URL: http://journals.cambridge.org/action/displayAbstra...


The role of matrix microstructure on the fracture of Al-alloy composites with 60 vol% alumina particulates was studied. The matrix composition and microstructure were systematically varied by changing the infiltration temperature and heat treatment. Characterization was carried out by a combination of metallography, hardness measurements, and fracture studies conducted on compact tension specimens to study the fracture toughness and crack growth in the composites. The composites showed a rise in crack resistance with crack extension (R curves) due to bridges of intact matrix ligaments formed in the crack wake. The steady-state or plateau toughness reached upon stable crack growth was observed to be more sensitive to the process temperature rather than to the heat treatment. Fracture in the composites was predominantly by particle fracture, extensive deformation, and void nucleation in the matrix. Void nucleation occurred in the matrix in the as-solutionized and peak-aged conditions and preferentially near the interface in the underaged and overaged conditions. Micromechanical models based on crack bridging by intact ductile ligaments were modified by a plastic constraint factor from estimates of the plastic zone formed under indentations, and are shown to be adequate in predicting the steady-state toughness of the composite.

Item Type: Journal Article
Publication: Journal of Materials Research
Publisher: Cambridge University Press
Additional Information: Copyright of this article belongs to Cambridge University Press.
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 11 Aug 2011 13:32
Last Modified: 11 Aug 2011 13:32
URI: http://eprints.iisc.ac.in/id/eprint/39848

Actions (login required)

View Item View Item