Jacob, KT and Shukla, AK (1987) Kinetic decomposition of Ni2SiO4 in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.
Full text not available from this repository. (Request a copy)Abstract
Nickel orthosilicate (Ni2SiO4) has been found to decompose into its component binary oxides in oxygen potential gradients at 1373 K. Nickel oxide was formed at the high oxygen potential boundary, while silica was detected at the low oxygen potential side. Significant porosity and fissures were observed near the Ni2SiO4/SiO2 interface and the SiO2 layer. The critical oxygen partial pressure ratio required for decomposition varied from 1.63 to 2.15 as the oxygen pressures were altered from 1.01 ⊠ 105 to 2.7X 10−4 Pa, well above the dissociation pressure of Ni2SiO4. Platinum markers placed at the boundaries of the Ni2SiO4 sample indicated growth of NiO at the higher oxygen potential boundary, without any apparent transport of material to the low oxygen potential side. However, significant movement of the bulk Ni2SiO4 crystal with respect to the marker was not observed. The decomposition of the silicate occurs due to the unequal rates of transport of Ni and Si. The critical oxygen partial pressure ratio required for decomposition is related both to the thermodynamic stability of Ni2SiO4 with respect to component oxides and the ratio of diffusivities of nickel and silicon. Kinetic decomposition of multicomponent oxides, first discovered by Schmalzried, Laqua, and co-workers [H. Schmalzried, W. Laqua, and P. L. Lin, Z. Natur Forsch. Teil A 34, 192 (1979); H. Schmalzried and W. Laqua, Oxid. Met. 15, 339 (1981); W. Laqua and H. Schmalzried, Chemical Metallurgy—A Tribute to Carl Wagner (Metallurgical Society of the AIME, New York, 1981), p. 29] has important consequences for their use at high temperatures and in geochemistry.
| Item Type: | Journal Article |
|---|---|
| Publication: | Journal of Materials Research |
| Publisher: | Cambridge University Press |
| Additional Information: | Copyright of this article belongs to Cambridge University Press. |
| Department/Centre: | Division of Chemical Sciences > Solid State & Structural Chemistry Unit Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy) |
| Date Deposited: | 19 Aug 2011 11:44 |
| Last Modified: | 19 Aug 2011 11:44 |
| URI: | http://eprints.iisc.ac.in/id/eprint/39834 |
Actions (login required)
 |
View Item |
