ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

A cold model study of raceway hysteresis

Sarkar, S and Gupta, GS and Litster, JD and Rudolph, V and White, ET and Choudhary, SK (2003) A cold model study of raceway hysteresis. In: Metallurgical and Materials Transactions B, 34 (2). pp. 183-191.

[img] PDF
A_Cold_Model_Study.pdf - Published Version
Restricted to Registered users only

Download (441kB) | Request a copy
Official URL: http://www.springerlink.com/content/d77446185831n2...

Abstract

The effect of a gas flow field on the size of raceway has been studied experimentally using a two-dimensional (2-D) cold model. It is observed that as the blast velocity from the tuyere increases, raceway size increases, and when the blast velocity is decreased from its highest value, raceway size does not change much until the velocity reaches a critical velocity. Below the critical velocity, raceway size decreases with decreasing velocity but is always larger than that for the same velocity when the velocity increased. This phenomenon is called "raceway hysteresis." Raceway hysteresis has been studied in the presence of different gas flow rates and different particle densities. Raceway hysteresis has been observed in all the experiments. The effect of liquid flow, with various superficial velocities, on raceway hysteresis has also been studied. A study of raceway size hysteresis shows that interparticle and particle-wall friction have a very large effect on raceway size. A hypothesis has been proposed to describe the hysteresis phenomenon in the packed beds. The relevance of hysteresis to blast furnace raceways has been discussed. Existing literature correlations for raceway size ignore the frictional effects. Therefore, their applicability to the ironmaking blast furnace is questionable.

Item Type: Journal Article
Publication: Metallurgical and Materials Transactions B
Publisher: The Minerals, Metals & Materials Society
Additional Information: Copyright of this article belongs to The Minerals, Metals & Materials Society.
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 03 Aug 2011 09:56
Last Modified: 03 Aug 2011 09:56
URI: http://eprints.iisc.ac.in/id/eprint/39698

Actions (login required)

View Item View Item