ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Items where Subject is "Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 2807.

Krishnan, BP and Surappa, MK and Rohatgi, PK (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. In: Journal of Materials Science, 16 (5). p. 1209.

Mruthyunjaya, TS (1987) A brief report on the national conference on machines and mechanisms held at Bangalore, Indiastar. In: Mechanism and Machine Theory, 22 (2). pp. 105-106.

Rao, Achuth and Arakeri, Jaywant H (1998) Integral analysis applied to radial film flows. In: International Journal of Heat and Mass Transfer, 41 (18). pp. 2757-2767.

Varma, Siva Prasad N and Narasimhan, R and Luo, Alan A and Sachdev, AK (2007) An analysis of localized necking in aluminium alloy tubes during hydroforming using a continuum damage model. In: International Journal of Mechanical Sciences, 49 (2). pp. 200-209.

Venkatesh, Prabha (1981) Influence of validation schemes in a laser Doppler anemometer period timing device for frequency measurement. In: Journal Of Physics E-Scientific Instruments, 14 (5). pp. 587-592.

A

Abani, N and Bakshi, S and Ravikrishna, RV (2007) Multi-dimensional modelling of spray, in-cylinder air motion and fuel–air mixing in a direct-injection engine. In: Sadhana, 32 (5). pp. 597-617.

Abass, HA and Raman, N and Narasimhan, MV (1994) Fuel drop size measurement in a carburetted induction system with 2 throttling methods. In: International journal of turbo and jet engines, 11 (4). 315 -325 .

Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Impact of tool profile on mechanical behavior and material flow in friction stir welding of dissimilar aluminum alloys Einfluss des Werkzeugprofils auf mechanisches Verhalten und Materialfluss beim Rührreibschwei�en unterschiedlicher Aluminiumlegierungen. In: Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 725-731.

Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Tool rotational speed impact on temperature variations, mechanical properties and microstructure of friction stir welding of dissimilar high-strength aluminium alloys. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (4).

Abolusoro, OP and Khoathane, MC and Mhike, W and Omoniyi, P and Kailas, SV and Akinlabi, ET (2024) Influence of welding parameters and post weld heat treatment on mechanical, microstructures and corrosion behaviour of friction stir welded aluminium alloys. In: Journal of Materials Research and Technology, 32 . pp. 634-648.

Abraham, Glomin Thomas and Chatterjee, Anindya (2003) Approximate Asymptotics for a Nonlinear Mathieu Equation Using Harmonic Balance Based Averaging. In: Nonlinear Dynamics, 31 (4). pp. 347-365.

Abraham, Glomin Thomas and Chatterjee, Anindya and Menon, AG (2004) Escape velocity and resonant ion dynamics in Paul trap mass spectrometers. In: International Journal of Mass Spectrometry, 231 (1). pp. 1-16.

Adabala, Ramachandra Rao and Srinivasan, Usha (1995) Peristaltic pumping in a circular tube in the presence of an eccentric catheter. In: Journal of Biomechanical Engineering, 117 (4). pp. 448-454.

Adams, Michael J and Biswas, Sanjay K and Briscoe, Brian J and Sinha, Sujeet K (1992) A two Roll Mill as a Rheomer for Pastes. In: MRS Proceedings, 289 . pp. 245-250.

Adhikari, Sangeeta and Swain, Rajashree and Sarkar, Debasish and Madras, Giridhar (2017) Wedge-like WO3 architectures for efficient electrochromism and photoelectrocatalytic activity towards water pollutants. In: MOLECULAR CATALYSIS, 432 . pp. 76-87.

Adhikary, N and Gurumoorthy, B (1999) Construction of trimmed surface patches from unstructured set of points. In: Proceedings of IFIP TC5/WG5.10 and CSI International Conference on Visual Computing (ICVC99), 23-26 Feb. 1999, Goa, India, pp. 78-87.

Adhikary, N and Gurumoorthy, B (2017) Direct global editing of STL mesh model for product design and rapid prototyping. In: RAPID PROTOTYPING JOURNAL, 23 (4). pp. 781-795.

Adinarayan, TV and Narasimhan, MV (1990) Evaluation of Displacement-Time Characteristics of Stirling Engine Drive Mechanisms. In: Proceedings of the 25th Intersociety Energy Conversion Engineering Conference, 1990. IECEC-90, 12-17 August, Reno, Nevada, Vol.5, 430-435.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D Nagesh and Dutta, Pradip (2010) Theoretical Studies of Hard Filling in Loop Heat Pipes. In: Journal of Thermophysics and Heat Transfer, 24 (1). pp. 173-183.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Dinesh and Dutta, Pradip (2009) Effects of mass of charge on loop heat pipe operational characteristics. In: Journal Of Thermophysics And Heat Transfer, 23 (2). pp. 346-355.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D and Dutta, Pradip and Srinivasan, K (2007) Thermohydraulic Modeling of Capillary Pumped Loop and Loop Heat Pipe. In: Journal of Thermophysics and Heat Transfer, 21 (2). pp. 410-421.

Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Nagesh and Dutta, Pradip (2010) Theoretical and Experimental Studies on an Ammonia-Based Loop Heat Pipe With a Flat Evaporator. In: IEEE Transactions on Components and Packaging Technologies, 33 (2). pp. 478-487.

Adoni, Abhijit A and Vaidya, Jasvanth S and Ambirajan, Amrit and Kumar, Dinesh and Krishnaswamy, Badarinarayana and Dutta, Pradip (2012) Evaporation Heat Transfer Coefficient in a Capillary Pumped Loop and Loop Heat Pipe for Different Working Fluids. In: Heat Transfer Engineering, 33 (9, SI). pp. 765-774.

Advaith, S and Aswathi, KT and Basu, S (2022) On the generation and evolution of heated vortex rings in viscous fluids. In: European Journal of Mechanics, B/Fluids, 91 . pp. 107-120.

Advaith, S and Manu, K V and Tinaikar, Aashay and Chetia, Utpal Kumar and Basu, Saptarshi (2017) Interaction of vortex ring with a stratified finite thickness interface. In: PHYSICS OF FLUIDS, 29 (9).

Advaith, S and Manu, KV and Tinaikar, Aashay and Chetia, Utpal Kumar and Basu, Saptarshi (2017) Interaction of vortex ring with a stratified finite thickness interface. In: PHYSICS OF FLUIDS, 29 (9).

Advaith, S and Parida, DR and Aswathi, KT and Dani, N and Chetia, UK and Chattopadhyay, K and Basu, S (2021) Experimental investigation on single-medium stratified thermal energy storage system. In: Renewable Energy, 164 . pp. 146-155.

Agarwal, Krishna Kant and Krishna, S and Ravikrishna, RV (2013) Mixing enhancement in a compact trapped vortex combustor. In: Combustion Science and Technology, 185 (3). pp. 363-378.

Agarwal, Krishna Kant and Ravikrishna, RV (2011) Experimental and Numerical Studies in a Compact Trapped Vortex Combustor: Stability Assessment and Augmentation. In: Combustion Science and Technology, 183 (12). pp. 1308-1327.

Agarwal, Krishna Kant and Ravikrishna, RV (2011) Flow-acoustic Characterisation of a Cavity-based Combustor Configuration. In: Defence Science Journal, 61 (6). pp. 523-528.

Agarwal, Krishna Kant and Ravikrishna, RV (2012) Validation of a Modified Eddy Dissipation Concept Model for Stationary and Nonstationary Turbulent Diffusion Flames. In: Combustion Science and Technology, 184 (2). pp. 151-164.

Agarwal, P and Kumar, N and Arakeri, JH (2018) Burning, Fluttering, and Extinguishing of a Candle Flame in a Tube. In: Resonance, 23 (11). pp. 1273-1281.

Agharkar, AN and Hajra, D and Roy, D and Jaiswal, V and Kabi, P and Chakravortty, D and Basu, S (2024) Evaporation of bacteria-laden surrogate respiratory fluid droplets: On a hydrophilic substrate vs contact-free environment confers differential bacterial infectivity. In: Physics of Fluids, 36 (3).

Agrawal, Arvind K and Narayanan, R Ganesh and Kailas, Satish V (2017) End forming behaviour of friction stir processed Al 6063-T6 tubes at different tool rotational speeds. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 52 (7). pp. 434-449.

Agrawal, M and Ananthasuresh, GK (2007) On Including Manufacturing Constraints in the Topology Optimization of Surface-Micromachined Structures. In: 7th World Congress of Structural and Multidisciplinary Optimization, COEX Seoul, , 21-25 May, 2007, South Korea.

Agrawal, Manish and Jog, C S (2017) Monolithic formulation of electromechanical systems within the context of hybrid finite elements. In: COMPUTATIONAL MECHANICS, 59 (3). pp. 443-457.

Agrawal, Manish and Jog, C S (2017) A quadratic time finite element method for nonlinear elastodynamics within the context of hybrid finite elements. In: APPLIED MATHEMATICS AND COMPUTATION, 305 . pp. 203-220.

Agrawal, Manish and Nandy, Arup and Jog, C S (2019) A hybrid finite element formulation for large-deformation contact mechanics. In: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 356 . pp. 407-434.

Agrawal, P and Dash, S (2022) Droplet trampolining on heated surfaces in the transitional boiling regime. In: International Journal of Heat and Mass Transfer, 190 .

Agrawal, P and Kumar, V and McBride, S and Dash, S (2023) Generality of Evaporative Crystal Liftoff on Heated Hydrophobic Substrates. In: Langmuir, 39 (22). pp. 7578-7589.

Agrawal, Vaibhav and Kollimada, Somanna A and Byju, Achu G and Gundiah, Namrata (2013) Regional variations in the nonlinearity and anisotropy of bovine aortic elastin. In: BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, 12 (6). pp. 1181-1194.

Ahmad, Babar and Pratap, Rudra (2011) Analytical Evaluation of Squeeze Film Forces in a CMUT With Sealed Air-Filled Cavity. In: IEEE Sensors Journal, 11 (10). pp. 2426-2431.

Ahmad, Babar and Pratap, Rudra (2010) Elasto-Electrostatic Analysis of Circular Microplates Used in Capacitive Micromachined Ultrasonic Transducers. In: IEEE Sensors Journal, 10 (11). pp. 1767-1773.

Ahmad, N and Ranganath, R and Ghosal, A (2020) A Simplified Impact Damping Model for Honeycomb Sandwich Using Discrete Element Method and Experimental Data. In: 13th International Conference on Vibrational Problems, ICoVP 2017, 29 Nov - 2 Dec 2017, Guwahati; India, pp. 337-353.

Ahmad, N and Ranganath, R and Poomani, D and Ghosal, A (2022) Vibration Isolation Characteristics of a Modified Gough-Stewart Platform with the Top Platform Filled with Damping Particles. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 243-256.

Ahmad, Nazeer and Ranganath, R and Ghosal, Ashitava (2017) Modeling and experimental study of a honeycomb beam filled with damping particles. In: JOURNAL OF SOUND AND VIBRATION, 391 . pp. 20-34.

Ahmad, Nazeer and Ranganath, R and Ghosal, Ashitava (2019) Modeling of the coupled dynamics of damping particles filled in the cells of a honeycomb sandwich plate and experimental validation. In: JOURNAL OF VIBRATION AND CONTROL, 25 (11). pp. 1706-1719.

Ahmad , Babar and Pratap, Rudra (2009) The Effect of Evacuated Backside Cavity on the Dynamic Characteristics of a Capacitive Micromachined Ultrasonic Transducer. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Akkimaradi, BS and Prasad, M and Dutta, P and Srinivasan, K (2002) Effect of packing density and adsorption parameters on the throughput of a thermal compressor. In: Carbon, 40 (15). pp. 2855-2859.

Akkimaradi, Basavaraj S and Prasad, Madhu and Dutta, Pradip and Saha, Bidyut Baran and Srinivasan, Kandadai (2009) Adsorption of Nitrogen on Activated Carbon-Refit of Experimental Data and Derivation of Properties Required for Design of Equipment. In: Journal of Chemical & Engineering Data, 54 (8). 2291 -2295.

Akkimaradi, Basavaraj S and Prasad, Madhu and Srinivasan, Kandadai and Dutta, Pradip (2001) Adsorption of 1,1,1,2-Tetrafluoroethane on Activated Charcoal. In: Journal of Chemical & Engineering Data, 46 (2). pp. 417-422.

Akshaya, AV and Nair, N and Bosco, MJ and Ananthasuresh, GK and Joseph, J (2023) Soil pH Sensing with an All-Solid-Electrode Sensor. In: 2023 IEEE Applied Sensing Conference, APSCON 2023, 23 - 25 January 2023, Bengaluru.

Alam, M and Arakeri, VH (1993) Observations on transition in plane bubble plumes. In: Journal of Fluid Mechanics, 254 . pp. 363-374.

Alam, Meheboob and Arakeri, VH and Nott, PR and Goddard, JD and Herrmann, HJ (2005) Instability-Induced Ordering, Universal Unfolding and the Role of Gravity in Granular Couette Flow. In: Journal Of Fluid Mechanics, 523 . pp. 277-306.

Alam, Meheboob and Nott, Prabhu R (1998) Stability of plane Couette flow of a granular material. In: Journal of Fluid Mechanics, 377 . pp. 99-136.

Alam, Meheboob and Nott, Prabhu R (1997) The influence of friction on the stability of unbounded granular shear flow. In: Journal of Fluid Mechanics, 343 . pp. 267-301.

Alle, Mythri and Varadarajan, Keshavan and Fell, Alexander and Nandy, SK (2009) Compiling Techniques for Coarse Grained Runtime Reconfigurable Architectures. In: 5th International Workshop on Applied Reconfigurable Computing, Mar 16-18, 2009, Karlsruhe, Germany.

Alwan, A and Ananthasuresh, GK (2006) Coupled electrostatic-elastic analysis for topology optimization using material interpolation. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 264-270.

Alwan, Aravind and Ananthasuresh, GK (2006) Topology Optimization of Micromachined Structures with Surface Micromachining Manufacturing Constraints. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Amarnath, S and Simha, KRY (1998) Tomographic data acquisition in axisymmetric specimens. In: Experimental Techniques, 22 (2). pp. 21-25.

Amarnath, S and Simha, KRY and Srinath, LS and Godbole, PB (1992) An integrated retardation method for an axisymmetric thermoelastic problem. In: Journal of Thermal Stresses, 15 (1). pp. 39-52.

Amarnath, S and Simha, KRY (1996) Torsion of half-space with lined cylindrical hole. In: Mechanics Research Communications, 23 (3). pp. 267-275.

Ambirajan, A and Adoni, AA and Vaidya, JS and Rajendran, AA and Kumar, D and Dutta, P (2012) Loop Heat Pipes: A Review of Fundamentals, Operation, and Design. In: Heat Transfer Engineering, 33 (4-5). pp. 387-405.

Ameen, Muhsin M and Ravikrishna, RV (2011) An EDC-based turbulent premixed combustion model. In: Combustion Theory and Modelling, 15 (5). pp. 607-622.

Amini Manesh, Navid and Basu, Saptarshi and Kumar, Ranganathan (2011) Modeling of a reacting nanofilm on a composite substrate. In: Energy, 36 (3). pp. 1688-1697.

Anand, AR and Ambirajan, A and Dutta, P (2020) Investigations on vapour blanket formation inside capillary wick of loop heat pipe. In: International Journal of Heat and Mass Transfer, 156 .

Anand, AR and Jaiswal, Akhil and Ambirajan, Amrit and Dutta, Pradip (2018) Experimental studies on a miniature loop heat pipe with flat evaporator with various working fluids. In: APPLIED THERMAL ENGINEERING, 144 . pp. 495-503.

Anand, SV and Arvind, K and Bharath, P and Mahapatra, D Roy (2010) Energy harvesting using ionic electro-active polymer thin films with Ag-based electrodes. In: Smart Materials and Structures, 19 (4).

Anand, TNC and Mohan, Madan A and Ravikrishna, RV (2012) Spray characterization of gasoline-ethanol blends from a multi-hole port fuel injector. In: FUEL, 102 . pp. 613-623.

Anand, TNC and Ravikrishna, RV (2006) Modeling of Fuel Transport in the Intake Manifold of a Single Cylinder Four-Stroke Engine: Carburetion vs. Port Fuel Injection. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati, India.

Anand, V and Ghosh, S and Ghosh, M and Rao, GM and Railkar, R and Dighe, RR (2011) Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules. In: Applied Surface Science, 257 (20). pp. 8378-8384.

Ananthan, M and Tomar, G (2021) Multiscale Simulation of Droplet Wall Interaction. In: 46th National Conference on Fluid Mechanics and Fluid Power, FMFP 2019, 9-11 Dec 2019, Coimbatore, pp. 533-538.

Ananthasuresh, GK (2008) Systematic Synthesis Methods. [Book Chapter]

Ananthasuresh, GK and Howell, Larry L (2005) Mechanical Design of Compliant Microsystems-A Perspective and Prospects. In: Journal of Mechanical Design, 127 (4). pp. 736-738.

Ananthasuresh, GK (2001) Design of fully rotatable, roller-crank-driven, cam mechanisms for arbitrary motion specifications. In: PERGAMON-ELSEVIER SCIENCE LTD, 36 (4). pp. 445-467.

Ananthasuresh, GK (2021) Editor's Desk. In: Journal of the Indian Institute of Science, 101 (2). p. 113.

Ananthasuresh, GK (2021) Editor's Desk. In: Journal of the Indian Institute of Science, 101 (1).

Ananthasuresh, GK (2020) Editor’s Desk. In: Journal of the Indian Institute of Science, 100 (2). p. 257.

Ananthasuresh, GK (2022) Editor’s Desk. In: Journal of the Indian Institute of Science, 102 (1). pp. 1-2.

Ananthasuresh, GK (2021) Editor’s Desk. In: Journal of the Indian Institute of Science, 101 (3). pp. 291-292.

Ananthasuresh, GK (2023) Editor’s Desk. In: Journal of the Indian Institute of Science, 103 (7). pp. 671-673.

Ananthasuresh, GK (2019) Journal of the Indian Institute of Science: Editorial. In: Journal of the Indian Institute of Science, 99 (2). p. 173.

Ananthasuresh, GK (2006) Protein sequence design on the basis of topology optimization techniques -Using continuous modeling of discrete amino acid types. In: IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials,, Oct 2005, Copenhagen, Denmark, pp. 455-466.

Ananthasuresh, GK (2007) Topology Optimization of Microsystems Devices Including Micromachining Constraints. In: 10th International Conference on Advanced Materials,, 8-13 October, 2007, Bangalore.

Ananthasuresh, GK and Alwan, Aravind (2006) Topology Optimization of Electrostatically Actuated Micromechanical Structures with Accurate Electrostatic Modeling of the Interpolated Material Model. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Ananthasuresh, GK and Kramer, SN (1992) KINEMATIC SYNTHESIS AND ANALYSIS OF THE RACK AND PINION MULTIPURPOSE MECHANISM. In: ASME, 114 (3). pp. 428-432.

Ananthasuresh, GK and Kramer, SN (1992) Kinematic Synthesis and Analysis of the Rack and Pinion Multi-Purpose Mechanism. In: ASME, 114 (3). pp. 428-432.

Anantheshwara, K and Selvan, K Arul and Mishra, Raja K and Bobji, MS (2009) In situ transmission electron microscopy study of deformation of an aluminum alloy tribolayer. In: Scripta Materialia, 60 (8). pp. 623-626.

Anantheshwara, K and Bobji, MS (2007) Frictional Behaviour of Inertial Slider. In: Procedings of NCRSME07, , 2007, Kanpur, India.

Anantheshwara, K and Bobji, MS (2010) In situ transmission electron microscope study of single asperity sliding contacts. In: Tribology International, 43 (5-6, S). pp. 1099-1103.

Anantheshwara, K and Bobji, MS (2012) Nanoscale wear experiments in Transmision electron microscope. In: International Conference On Nano Science and Technology, 20th to 23rd January 2012, Hyderabad, India.

Anantheshwara, K and Lockwood, AJ and Mishra, Raja K and Inkson, BJ and Bobji, MS (2012) Dynamical Evolution of Wear Particles in Nanocontacts. In: Tribology Letters, 45 (2). pp. 229-235.

Anantheshwara, K and Murali, NS and Bobji, MS (2008) Effect of friction on the performance of inertial slider. In: Sadhana, 33 (3). pp. 221-226.

Anbukkarasi, R and Kailas, S V (2020) Influences of shape of the new interfaces and morphology of the intermetallics on mechanical properties of aluminum AA2024�pure copper joints by friction stir welding. In: International Journal of Advanced Manufacturing Technology, 106 (11-12). pp. 5071-5083.

Anbukkarasi, R and Kailas, Satish V (2019) Role of Third Material (Interlayer) on Mechanical Properties of the AA2024-Copper Joints Carried out by Friction Stir Welding (FSW). In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1603-1606.

Angirasa, D and Srinivasan, J (1989) Natural convection flows due to the combined buoyancy of heat and mass diffusion in a thermally stratified medium. In: Journal of Heat Transfer, 111 (3). pp. 657-663.

Angirasa, D and Sarma, PK (1988) A numerical study of laminar axisymmetric plumes due to the combined buoyancy of heat and mass diffusion. In: Applied Scientific Research, 45 (4). pp. 339-352.

Angirasa, D and Srinivasan, J (1992) Natural Convection Heat Transfer From an Isothermal Vertical Surface to a Stable Thermally Stratified Fluid. In: Journal of Heat Transfer, 114 (4). pp. 917-923.

Angurana, R and Shehata, N and Katoch, V and Kaur, H and Raina, TK and Singh, S and Ramamurthy, PC and Dhanjal, DS and Singh, J (2023) Depleted mineralization of pesticides on soil microbial diversity. [Book Chapter]

Anil, KM and Panda, Sunita and Das, Rajat Kumar and Pratap, Rudra (2009) Low Level Signal Measure-ments for Piezoresistive and Capacitive MEMS Sensor. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Anil Kumar, KS and Rajneesh, H and Madhu, HC (2019) Effect of SiC nano particles on grain stability of friction stir processed AA7075. In: 2019 International Conference on Materials and Manufacturing Methods, MMM 2019, 5-7 July 2019, Tiruchirapalli; India, pp. 2586-2590.

Anindya, Chatterjee (2009) A Brief Introduction to Nonlinear Vibrations. [Teaching Resource] (Unpublished)

Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2006) Deduction of a parameter characterizing the plowing nature of surfaces from sliding experiments. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2008) Tribological characterisation of surfaces from the friction point of view. In: 9th Biennial 1ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel., July 7-9, Haifa.

Annamalai, K and Rao, VK and Sreenath, AV (1971) Distribution of products around a burning droplet: an analytical approach. In: Combustion and Flame, 16 (3). pp. 287-294.

Ansari, Mohammad Aaquib and Viswanathan, Koushik (2022) Propagating Schallamach-type waves resemble interface cracks. In: Physical Review E, 105 (4). ISSN 2470-0045

Ansumali, S and Kaushal, S and Kumar, A and Prakash, MK and Vidyasagar, M (2020) Modelling a pandemic with asymptomatic patients, impact of lockdown and herd immunity, with applications to SARS-CoV-2. In: Annual Reviews in Control, 50 . pp. 432-447.

Ansumali, S and Kaushal, S and Kumar, A and Prakash, MK and Vidyasagar, M (2020) Modelling the COVID-19 Pandemic: Asymptomatic Patients, Lockdown and Herd Immunity. In: IFAC-PapersOnLine, 3-5 December 2020, pp. 823-828.

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3).

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3). 035028.

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: a finite element analysis. In: SMART MATERIALS AND STRUCTURES, 28 (3).

Anuja, J and Narasimhan, R and Ramamurty, U (2019) A numerical study of the indentation mechanics of shape memory alloys in different temperature regimes. In: MECHANICS OF MATERIALS, 139 .

Anuradha, Sanyal and Pradip, Dutta and Srinivasan, K (2008) Numerical Study Of Heat Transfer From Pin Fin Heat Sink Using Steady And Pulsated Impinging Jets. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Appala, Tharakeshwar and Ghosal, Ashitava (2015) A mobile robot with a two-degree-of-freedom suspension for traversing uneven terrain with minimal slip: Modeling, simulation and experiments. In: MECHANISM AND MACHINE THEORY, 93 . pp. 83-97.

Aradhya, KSS and Murthy, NS and Srinath, LS (1985) Influence of Elastic-Constants on Mode-I Stress-Intensity Factors in 3-Dimensional Crack Problems. In: Engineering Fracture Mechanics, 22 (6). pp. 939-950.

Aradhya, KSS and Surappa, MK (1991) Estimation of mechanical properties of 6061 Al---SiCp composites using finite element method. In: Scripta Metallurgica et Materialia, 25 (4). 817-822 .

Arakeri, VH (1988) Analysis Of Traveling Bubble Cavitation Inception Data. In: Indian Journal of Technology Indian J Tech, 26 (2). pp. 99-103.

Arakeri, JH (2006) From Convection in a closed cavity, Nu~Ra**1/3 limit, to convection in an open ended cavity Nu~Ra**1/2 limit. In: Conference and Euromech Colloquium 480 on High Rayleigh Number Convection, 4-8 Sept 2006, ICTP, Trieste Italy.

Arakeri, JH and Kumar, N and Mahapatra, O (2024) A dimensionless heat transfer coefficient for free convection that is more appropriate than Nusselt number. In: Physics of Fluids, 36 (8).

Arakeri, JH and Shukla, RK (2011) A unified view of energetic efficiency in active drag reduction, thrust generation and self-propulsion through a loss coefficient with application to flow past a circular cylinder with tangential surface motion. In: UNSPECIFIED, pp. 317-322.

Arakeri, Jaywant and Srinivasan, Usha and Sreenivas, KR and Simha, RV (2008) The earth air tunnel (EAT) system. In: ACREX, India 2008. Towards a greener future.

Arakeri, Jaywant H (2015) Special Issue on Fluid Mechanics and Fluid Power (FMFP) and International Union of Theoretical and Applied Mechanics (IUTAM). In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 40 (3, SI). pp. 623-624.

Arakeri, Jaywant H and Avila, FE and Dada, Jorge M and Tovar, Ramon O (2000) Convection in a long vertical tube due to unstable stratification - A new type of turbulent flow? In: Current Science, 79 (6). pp. 859-866.

Arakeri, Jaywant H and Cholemari, Murali R (2008) Homogeneous buoyancy driven turbulence in a vertical tube; natural convection analog of pressure driven pipe flow. In: 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, JNTU, Hyderabad, India , Hyderabad.

Arakeri, Jaywant H and Cholemari, Murali R (2009) Shear-free turbulence sustained by buoyancy (Invited Talk). In: IISc-Centernary International Conference and Exhibition on Aerospace Engineering , 18-22 May 2009.

Arakeri, Jaywant H and Das, Debopam and Srinivasan, J (2000) Bifurcation in a buoyant horizontal laminar jet. In: Journal of Fluid Mechanics, 412 . pp. 61-73.

Arakeri, Jaywant H and Das, SP and Srinivasan, Usha (2006) Localised instability in unsteady separation bubbles. In: 6th IUTAM Symposium on Laminar-Turbulent Transition, DEC 13-17, 2004, Bangalore, INDIA.

Arakeri, Jaywant H and Dewan, Anupam (1996) Comparison of four turbulence models for wall-bounded flows affected by transverse curvature. In: AIAA Journal, 34 (4). pp. 842-844.

Arakeri, Jaywant H and Shukla, Ratnesh K (2013) A unified view of energetic efficiency in active drag reduction, thrust generation and self-propulsion through a loss coefficient with some applications. In: Journal of Fluids and Structures, 41 . pp. 22-32.

Arakeri, VH (1980) Boundary layer transition observations on a body of revolution with surface heating and cooling in water. In: International Journal of Heat and Mass Transfer, 23 (4). pp. 413-424.

Arakeri, VH (1979) Cavitation inception. In: Sadhana - Academy Proceedings in Engineering Sciences, 2 (MAY ). p. 149.

Arakeri, VH (1999) Contributions to some cavitation problems in turbomachinery. In: Sadhana Academy Proceedings in Engineering Sciences, 24 . pp. 453-483.

Arakeri, VH (1993) Effect of dissolved air content on single bubble sonoluminescence. In: Pramana Journal of Physics, 40 (2). pp. 145-147.

Arakeri, VH (2006) Indian Institutes of Technology: Report of the review committee-2004. In: Current Science Association, 90 (4). pp. 485-486.

Arakeri, VH (1993) Influence of various gases on single bubble sonoluminescence. In: Pramana - Journal of Physics, 41 (3). L291-L294.

Arakeri, VH (1981) Real-fluid effects in flow cavitation. In: Sadhana : Academy Proceedings in Engineering Sciences, 4 (3). pp. 381-393.

Arakeri, VH (1998) Resolving single bubble sonoluminescence flask width. In: Current Science, 75 (2). pp. 84-85.

Arakeri, VH (2003) Sonoluminescence and bubble fusion. In: Current Science, 85 (7). pp. 911-916.

Arakeri, VH and Acosta, Allan (1981) Viscous effects in the inception of cavitation. In: Journal of Fluids Engineering, 103 (2). pp. 280-287.

Arakeri, VH and Carroll, JA and Holl, JW (1981) A Note On The Effect Of Short And Long Laminar Separation-Bubbles On Desinent Cavitation. In: Journal of Fluids Engineering, 103 (1). pp. 28-32.

Arakeri, VH and Chakraborty, S (1990) Studies towards potential use of ultrasonics in hydrodynamic cavitation control. In: Current Science (Bangalore), 59 (24). pp. 1326-1333.

Arakeri, VH and Giri, Asis (2001) Optical pulse characteristics of sonoluminescence at low acoustic drive levels. In: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 63 (6). 066303/1-13.

Arakeri, VH and Nair , BG (1990) Sonic velocity measurements in gas-liquid mixture with low void fractions. In: Current Science (Bangalore), 59 (7). pp. 363-367.

Arakeri, VH and Ram, HSG (1984) Visualization of flow past a sphere near its critical reynolds-number. In: Current science, 53 (4). pp. 180-182.

Arakeri, VH and Ramarajan, V (1981) Inception of Cavitation From a Backward Facing Step. In: Journal of Fluids Engineering, 103 (2). pp. 288-293.

Arakeri, VH and Satyanarayana, SG and Mani, K and Sharma, SD (1991) Studies on Scaling of Flow Noise Received at the Stagnation Point of an Axisymmetric Bodynext Term. In: Journal of Sound and Vibration, 146 (3). pp. 449-462.

Arakeri, VH and Shanmuganathan, V (1985) On the evidence for the effect of bubble interference on cavitation noise. In: Journal of Fluid Mechanics, 159 .

Arakeri, VH and Sharma, SD and Ram, Govinda HS and Mani, K (1988) The high speed water tunnel facility at the Indian Institute of Science. In: Sadhana : Academy Proceedings in Engineering Sciences, 13 (4). pp. 223-235.

Aralihalli, Sudhakara and Biswas, Sanjay K (2013) Grafting of Dispersants on MoS2 Nanoparticles in Base Oil Lubrication of Steel. In: TRIBOLOGY LETTERS, 49 (1). pp. 61-76.

Aravind, MA and Saikumar, Niranjan and Dinesh, NS (2017) Optimal Position Control of a DC Motor Using LQG with EKF. In: International Conference on Mechanical, System and Control Engineering (ICMSC), MAY 19-21, 2017, St Petersburg, RUSSIA, pp. 149-154.

Arghode, Vaibhav K and Kumar, Arvind and Sundarraj, Suresh and Dutta, Pradip (2008) Computational Modeling of GMAW Process for Joining Dissimilar Aluminum Alloys. In: Numerical Heat Transfer, Part A: Applications, 53 (4). pp. 432-455.

Arghode, Vaibhav K and Kumar, Pramod and Joshi, Yogendra and Weiss, Thomas and Meyer, Gary (2013) Rack Level Modeling of Air Flow Through Perforated Tile in a Data Center. In: JOURNAL OF ELECTRONIC PACKAGING, 135 (3).

Arjun Sreedhar, S and Narasimhan, R (2024) Numerical simulations of ductile crack initiation and growth in a textured magnesium alloy. In: Mechanics of Materials, 190 .

Arjun Sreedhar, S and Narasimhan, R (2024) Numerical simulations of ductile crack initiation and growth in a textured magnesium alloy. In: Mechanics of Materials, 190 .

Arndt, REA and Arakeri, VH and Higuchi, H (1991) Some observations of tip-vortex cavitation. In: Journal of Fluid Mechanics, 229 . 269 -289.

Arora, PR and Raghavan, MR (1973) Effect Of Tensile Prestrain On Fatigue-Strength Of Aluminum-Alloy In High Cycle Fatigue. In: Journal of Engineering Materials and Technology, 95 (2). pp. 76-82.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content. In: Journal of Testing and Evaluation, 16 (3). 298 -304.

Arora, PR and Dattaguru, B and Hande, HSS (1992) A method for estimation of the radius of elastic-plastic boundary around cold-worked holes. In: Journal of Testing and Evaluation, 20 (5). pp. 369-375.

Arora, PR and Dattaguru, B and Hande, Subramanya HS (1992) The fatigue crack growth rate in L-72 Al-alloy plate specimens with cold worked holes. In: Engineering Fracture Mechanics, 42 (6). pp. 989-1000.

Arora, PR and Raghavan, MR (1988) Prediction of Specimen Strain from Extensometer Deflection Measurements in a Direct Stress Fatigue Test Specimen under Static Tensile Loading. In: Journal of Testing and Evaluation, 16 (4). pp. 386-391.

Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions. In: Engineering Fracture Mechanics, 29 (1). 67 -79.

Arora, PR and Simha, KRY (1996) Analytical and Experimental Evaluation of Coldworking Process for Strain Hardening Materials. In: Engineering Fracture Mechanics, 53 (3). pp. 371-385.

Arya, Anuradha D and Hallur, Pavan M and Karkisaval, Abhijith G and Gudipati, Aditi and Rajendiran, Satheesh and Dhavale, Vaibhav and Ramachandran, Balaji and Jayaprakash, Aravindakshan and Gundiah, Namrata and Chaubey, Aditya (2016) Gelatin Methacrylate Hydrogels as Biomimetic Three-Dimensional Matrixes for Modeling Breast Cancer Invasion and Chemoresponse in Vitro. In: ACS APPLIED MATERIALS & INTERFACES, 8 (34). pp. 22005-22017.

Ashwin, K P and Chaudhury, A N and Ghosal, A (2020) Efficient Representation of Ducts and Cluttered Spaces for Realistic Motion Planning of Hyper-Redundant Robots through Confined Paths. In: COMPUTER-AIDED DESIGN, 119 .

Ashwin, KP and Ghosal, A (2021) Forward Kinematics of Cable-Driven Continuum Robot Using Optimization Method. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17-20 December 2019, Bengaluru; India, pp. 391-403.

Ashwin, KP and Ghosal, A (2019) Profile estimation of a cable-driven continuum robot with general cable routing. In: IFToMM World Congress on Mechanism and Machine Science, 14 June 2019, pp. 1879-1888.

Ashwin, KP and Ghosal, A (2020) Static modeling of miniaturized pneumatic artificial muscles, kinematic analysis, and experiments on an endoscopic end-effector. In: IEEE/ASME Transactions on Mechatronics, 24 (4). pp. 1429-1439.

Ashwin, KP and Ghosal, A (2018) A Survey on Static Modeling of Miniaturized Pneumatic Artificial Muscles With New Model and Experimental Results. In: APPLIED MECHANICS REVIEWS, 70 (4).

Ashwin, KP and Mahapatra, SK and Ghosal, A (2021) Profile and contact force estimation of cable-driven continuum robots in presence of obstacles. In: Mechanism and Machine Theory, 164 .

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2010) CFD analysis of high frequency miniature pulse tube refrigerators for space applications with thermal non-equilibrium model. In: Applied Thermal Engineering, 30 (2-3). pp. 152-166.

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2012) Effect of natural convection on oscillating flow in a pipe with cryogenic temperature difference across the ends. In: International Journal of Heat and Mass Transfer, 55 (4). pp. 680-694.

Ashwin, TR and Narasimham, GSVL and Jacob, Subhash (2011) Oscillatory flow and temperature fields in an open tube with temperature difference across the ends. In: International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3357-3368.

Asibor, J and Pandey, K and Basu, S and Emekwuru, N (2020) Characterization of the spray cone angles of fuels with nanoparticle additives. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-26 July 2018, Chicago; United States.

Asif, SAS and Muthu, DVS and Sood, AK and Biswas, SK (1995) Surface damage of yttria-tetragonal zirconia polycrystals and magnesia-partially-stabilized zirconia in single-point abrasion. In: Journal of the American Ceramic Society, 78 (12). pp. 3357-3362.

Asif, Syed SA and Biswas, SK (1994) The mechanical response of tetragonal zirconia polycrystal to conical indentation. In: Bulletin of Materials Science, 17 (6). 863-873 .

Asif, Syed SA and Biswas, SK and Bai, Pramila BN (1990) Transfer and transitions in dry sliding wear of copper against steel. In: Scripta Metallurgica et Materialia, 24 (7). pp. 1351-1356.

Asif, Syed SA and Somasundaram, P and Umarji, AM and Biswas, SK (1993) Effect of Lanthanum Substitution at the Barium Site on the Mechanical Behaviour in YBCO Superconductor. In: Materials Research Bulletin, 28 (1). pp. 73-80.

Askalany, Ahmed A and Saha, Bidyut B and Uddin, Kutub and Miyzaki, Takahiko and Koyama, Shigeru and Srinivasan, Kandadai and Ismail, Ibrahim M (2013) Adsorption Isotherms and Heat of Adsorption of Difluoromethane on Activated Carbons. In: JOURNAL OF CHEMICAL AND ENGINEERING DATA, 58 (10). pp. 2828-2834.

Aswin, N and Dutta, Pradip and Murthy, Srinivasa S (2016) Screening of metal hydride pairs for closed thermal energy storage systems. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 949-957.

Auchter, Joseph and Moore, Carl and Ghosal, Ashitava (2007) Modeling of wheeled mobile robots using dextrous manipulation kinematics. In: Proceedings of the World Congress on Engineering and Computer Science 2007,WCECS 2007, October 24-26, 2007, San Francisco.

Avinash, G and Kumar, S and Goutham Krishna, B and Mohammed Akram, B and Manoj, K and Eshanth, R and Sriprasad, NS (2023) Acoustic Analysis of Effect of Louver Window Material in Noise Attenuation. In: 2nd International Conference on Recent Advancements in Mechanical Engineering, ICRAME 2021, 7 - 9 February 2021, Virtual, Online, pp. 389-401.

Avulapati, Madan Mohan and Anand, TNC and Ravikrishna, RV (2013) Full Chemical Kinetic Simulation of Biogas Early Phase Combustion in SI Engines. In: Energy and Fuels, 27 (1). pp. 197-207.

Avulapati, Madan Mohan and Ravikrishna, R (2013) AN EXPERIMENTAL STUDY ON EFFERVESCENT ATOMIZATION OF BIO-OIL FUELS. In: ATOMIZATION AND SPRAYS, 22 (8). pp. 663-685.

Avulapati, Madan Mohan and Ravikrishna, RV (2015) EXPERIMENTAL STUDIES ON AIR-ASSISTED ATOMIZATION OF JATROPHA PURE PLANT OIL. In: ATOMIZATION AND SPRAYS, 25 (7). pp. 553-569.

Avulapati, Madan Mohan and Venkata, Ravikrishna Rayavarapu (2013) Experimental studies on air-assisted impinging jet atomization. In: INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 57 . pp. 88-101.

Awasthi, S and Gaur, JK and Bobji, MS (2020) Advanced ferrogels with high magnetic response and wear resistance using carbon nanotubes. In: Journal of Alloys and Compounds, 848 .

Awasthi, S and Gaur, JK and Bobji, MS and Srivastava, C (2022) Nanoparticle-reinforced polyacrylamide hydrogel composites for clinical applications: a review. In: Journal of Materials Science, 57 (17). pp. 8041-8063.

Awasthi, S and Gaur, JK and Pandey, SK and Bobji, MS and Srivastava, C (2021) High-Strength, Strongly Bonded Nanocomposite Hydrogels for Cartilage Repair. In: ACS Applied Materials and Interfaces .

Awasthi, S and Pandey, SK and Balani, K (2020) Tuning the magnetism and tribological behaviour of electrodeposited Ni/Cu bi-layer by selective reinforcement of carbon nanotubes. In: Journal of Alloys and Compounds, 818 .

Awasthi, S and Pandey, SK and Gaur, JK and Srivastava, C (2022) Load-bearing study and interfacial interactions of hydroxyapatite composite coatings for bone tissue engineering. In: Materials Chemistry Frontiers, 6 (24). 3731 -3747.

Azeez, ST and Akinlabi, ET and Kailas, SV and Brandi, SD (2018) Microstructural properties of a dissimilar friction stir welded thick aluminum aa6082-t6 and aa7075-t6 alloy. In: MATERIALS TODAY-PROCEEDINGS, 5 (9, 3). pp. 18297-18306.

ayadevan, KR and Narasimhan, R (1995) Finite element simulation of wedge indentation. In: Computers & Structures, 57 (5). pp. 915-927.

B

Babu, AR and Basu, N and Visweswariah, S and Gundiah, N and Rathod, ML (2012) Role of substrate stiffness and mechanical stimulus in endothelial phenotype. In: International Conference on Angiogenesis: Basics and Applications, 1–3 March 2012, Chennai, Tamilnadu, India.

Babu, AR and Gundiah, N (2014) Role of Crosslinking and Entanglements in the Mechanics of Silicone Networks. In: EXPERIMENTAL MECHANICS, 54 (7). pp. 1177-1187.

Babu, Anju R and Byju, Achu G and Gundiah, Namrata (2015) Biomechanical Properties of Human Ascending Thoracic Aortic Dissections. In: JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 137 (8).

Babu, Anju R and Gundiah, Namrata (2018) Contributions of network topological structures to the mechanical properties of PDMS elastomers. In: MATERIALS RESEARCH EXPRESS, 5 (8).

Babu, Sivakumar GL and Lakshmikanthan, P (2015) Estimation of the components of municipal solid waste settlement. In: WASTE MANAGEMENT & RESEARCH, 33 (1). pp. 30-38.

Badhuk, P and Ravikrishna, RV (2022) Development and validation of skeletal/global mechanisms describing TMP-based flame inhibition. In: Combustion Theory and Modelling, 26 (5). pp. 968-987.

Badhuk, P and Ravikrishna, RV (2022) Flame inhibition by aqueous solution of Alkali salts in methane and LPG laminar diffusion flames. In: Fire Safety Journal, 130 .

Badhuk, P and Ravikrishna, RV (2021) A numerical study on the response of chemically active flame inhibitors to strain rate variations. In: Proceedings of the Combustion Institute, 38 (3). pp. 4615-4623.

Badhuk, P and Ravikrishna, RV (2019) A numerical study on the response of trimethyl phosphate-doped laminar counterflow diffusion flames to strain rate variations. In: 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 1 st -5 th July 2019, Fukuoka, Japan.

Badhuk, P and Ravikrishna, RV (2022) A study on the extinction condition in counterflow diffusion flames of methane and LPG under the influence of polydisperse water mist. In: Fuel, 318 .

Bagchi, S and Basu, S and Chaudhuri, S and Saha, A (2021) Penetration and secondary atomization of droplets impacted on wet facemasks. In: Physical Review Fluids, 6 (11).

Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1982) Scanning electron microscopy studies of wear in LM13 and LM13-graphite particulate composite. In: Wear, 76 (2). pp. 211-220.

Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1981) Subsurface damage in dry wear of Al-Si alloys. In: Wear, 71 (3). pp. 381-384.

Bai, BNP and Biswasa, SK and Kumtekar, NN (1983) Scanning electron microscopy study of worn Al-Si alloy surfaces. In: Wear, 87 (3). pp. 237-249.

Bai, BNP and Saravanan, RA and Surappa, RA (1996) Tribological studies on aluminium matrix composites. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, Bangalore, India.

Bai, Pramila BN and Biswas, SK (1987) Characterization of dry sliding wear of Al---Si alloys. In: Wear, 120 (1). pp. 61-74.

Bai, Pramila BN and Biswas, SK (1991) Effect of magnesium addition and heat treatment on mild wear of hypoeutectic aluminium-silicon alloys. In: Acta Metallurgica et Materialia, 39 (5). pp. 833-840.

Bai, Pramila BN and Biswas, SK (1983) Scanning electron microscopy study of worn $Al-Si$ alloy surfaces. In: Wear, 87 (3). pp. 237-249.

Bai, Pramila BN and Haresh, K and Biswas, SK and Bhave, SK (1993) Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact. In: Tribology International, 26 (3). pp. 175-182.

Bai, Pramila BN and Shamasunder, HS and Biswas, SK (1988) Debris analysis in dry sliding wear of Al-Si alloys. In: Materials Science and Engineering, 104 . L11-L14.

Bai1, BN Pramila and Biswas, SK (1984) Subsurface deformation in dry sliding of hypo-eutectic Al-Si alloys. In: Journal of Materials Science, 19 (11). pp. 3588-3592.

Baia, Pramila BN and Ramasesh, BS and Surappa, MK (1992) Dry sliding wear of A356-Al-SiCp composites. In: Wear, 157 (2). pp. 295-304.

Baichapur, Gautham S and Gugale, Harshala and Maheshwari, Ashveen and Bhargav, Santosh DB and Ananthasuresh, GK (2014) A Vision-Based Micro-Newton Static Force Sensor Using a Displacement-Amplifying Compliant Mechanism (DaCM). In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 42 (2). pp. 193-210.

Bakshi, S and Anand, TNC and Ravikrishna, RV (2007) In-cylinder charge stratification and fuel-air mixing in a new, low-emission two-stroke engine. In: International Journal of Engine Research, 8 (3). pp. 271-287.

Bakshi, S and Deshmukh, D and Ravikrishna, RV (2004) Multidimensional modelling of flow through piston-controlled ports using a multi-block, moving mesh algorithm. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 218 (2). pp. 207-222.

Bakshi, S and Ravikrishna, RV (2003) Assessment of zero-dimensional, hybrid and multidimensional simulations for transient air flow through a cylinder-duct assembly. In: Proceedings of the Institution of Mechanical Engineers - Part C: Mechanical Engineering Science, 217 (5). pp. 585-591.

Bakshi, S and Ravikrishna, RV (2003) Multidimensional simulation of the air-flow and fuel transport process in the air-assisted injection system of a new, low-emission two-stroke engine. In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 217 (D5). pp. 383-392.

Balachandra, TC and Ravindran, K and Nagabhushana, GR (1991) Numerical estimation of hotspot temperatures in electrodes subjected to pulsed electron beam heating in vacuum. In: International Communications in Heat and Mass Transfer, 18 (3). pp. 397-405.

Balaji, G and Ananthasuresh, GK (2007) Flow-rate Measurements of an Electro-Magnetically Actuated, Miniature, Self-priming Liquid Pump. In: flotec.g Global Conference and Exhibition 2007, Towards Intelligent Flow Measurement & Control System, , 26-28, Sep., 2007, Palakkad, India.

Balaji, G and Biradar, P and Saikrishna, CN and Ramaiah, Venkata K and Bhaumik, SK and Haruray, A and Ananthasuresh, GK (2008) An SMA-actuated, Compliant Mechanism-based Pipe-crawler. In: CD-ROM proceedings of ISSS 2008, International Conference on Smart Materials, Structures, and System.

Balaji, G and Singh, A and Ananthasuresh, GK (2006) Electro-magnetically Actuated Minute Polymer Pump Fabricated using Packaging Technology. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 258-263.

Balakrishna, R and Ghosal, Ashitava (1995) Modeling of Slip for Wheeled Mobile Robots. In: IEEE Transactions on Robotics and Automation, 11 (1). pp. 126-132.

Balakrishnan, S and Mathad, SS and Sharma, G and Raju, SR and Reddy, UB and Das, S and Ananthasuresh, GK (2019) A Nondimensional Model Reveals Alterations in Nuclear Mechanics upon Hepatitis C Virus Replication. In: Biophysical Journal, 116 (7). pp. 1328-1339.

Balakrishnan, Sreenath and Deshpande, Kaustubh and Ananthasuresh, GK (2012) Note on modelling directionality in piezoresistivity. In: National Conference on Smart Materials Structures and Systems, September 21-22, 2012, Coimbatore, India.

Balakuntala, MVS and Palathingal, S and Ananthasuresh, GK (2021) A Passive Universal Grasping Mechanism Based on an Everting Shell. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019through 20 December 2019, Bengaluru, pp. 601-608.

Balasingh, C and Seshadri, MR and Srinivasan, MN and Ramaseshan, S (1984) Effect of carbon equivalent and inoculation on residual stresses in grey iron castings. In: Journal of Mechanical Working Technology, 9 (1). pp. 53-66.

Balu, R and Marathe, AG and Paul, PJ and Mukunda, HS (1991) Analysis of performance of a hot gas injection thrust vector control system. In: Journal of Propulsion and Power, 7 (4). pp. 580-585.

Ban, Tula Ram and Sen, Dibakar (2003) Graph Based Topological Analysis of Tessellated Surfaces. In: Eighth ACM Symposium on Solid Modeling and Applications, June 16 - 20, 2003, Seattle, Washington, USA, pp. 274-279.

Banday, B and Vineethkumar, K and Surwade, N and Nagrare, SR and Ghose, D (2024) UAV Path Planning for Cave Exploration Using Tangent Based Intersection Method. In: AIAA SciTech Forum and Exposition, 2024, 8 January 2024through 12 January 2024, Orlando, Florida..

Bandla, Srinivasa Rao and Gurumoorthy, B (2011) Constructing a wire-frame from views on arbitrary view planes for objects with conic sections inclined to all view planes. In: Computer-Aided Design, 43 (12). pp. 1639-1653.

Bandyopadhyay, S and Ghosal, A (2007) Classical screw theory: a fresh look using the dual eigenproblem approach. In: 13th National Conference on Machines and Mechanisms, NaCoMM 2007, 12 December 2007 through 13 December 2007, Bangalore, pp. 213-220.

Bandyopadhyay, S and Ghosal, A (2009) An eigenproblem approach to classical screw theory. In: Mechanism and Machine Theory, 44 (6). pp. 1256-1269.

Bandyopadhyay, S and Ghosal, A and Ravani, B (2002) A differential geometric method for kinematic analysis of two- and three-degree-of-freedom rigid body motions. In: Mechanics of Structures and Machines, 30 (3). pp. 279-307.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2004) Analysis of configuration space singularities of closed-loop mechanisms and parallel manipulators. In: Mechanism and Machine Theory, 39 (5). pp. 519-544.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2004) Analytical determination of principal twists in serial, parallel and hybrid manipulators using dual vectors and matricies. In: Mechanism and Machine Theory, 39 (12). pp. 1289-1305.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2007) Classical screw theory: A fresh look using dual eigenvalue approach. In: 13th National Conference on Mechanisms and Machines (NaCoMM07),, December 12-13, 2007, IISc, Bangalore.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2006) Geometric characterization and parametric representation of the singularity manifold of a 6-6 Stewart platform manipulator. In: Mechanism and Machine Theory, 41 (11). pp. 1377-1400.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2007) An algebraic formulation of exact force-, moment-isotropy in spatial parallel manipulators. In: 12th IFToMM World Congress, June 18-21, 2007, Besancon.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2008) An algebraic formulation of kinematic isotropy and design of isotropic 6-6 Stewart platform manipulators. In: Mechanism and Machine Theory, 43 (5). pp. 591-616.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2009) An algebraic formulation of static isotropy and design of statically isotropic 6-6 Stewart platform manipulators. In: Mechanism and Machine Theory, 44 (7). p. 1360.

Bandyopadhyay, Sandipan and Ghosal, Ashitava (2009) An algebraic formulation of static isotropy and design of statically isotropic 6–6 Stewart platform manipulators. In: Mechanism and Machine Theory, 44 (7). pp. 1360-1370.

Banerjee, S and Menon, MS and Ananthasuresh, GK and Ghosal, A (2011) Simulation of length-preserving motions of flexible one dimensional oObjects using optimization. In: 13th World Congress in Mechanism and Machine Science, Jun 19,2011 - Jun 25,2011, Guanajuato, México.

Banik, D and Palathingal, S and Ananthasuresh, GK and Ghosh, A (2021) A Mechanical OR Gate Using Pinned-Pinned Bistable Arches. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17-20 December 2019, Bengaluru; India, pp. 861-874.

Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2008) Performance studies on mechanical + adsorption hybrid compression refrigeration cycles with HFC 134a. In: International Journal of Refrigeration, 31 (8). pp. 1398-1406.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2009) Activated carbon + HFC 134a based two stage thermal compression adsorption refrigeration using low grade thermal energy sources. In: Applied Thermal Engineering, 29 (11-12). pp. 2257-2264.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2010) Development and transient performance results of a single stage activated carbon - HFC 134a closed cycle adsorption cooling system. In: Applied Thermal Engineering, 30 (10). pp. 1126-1132.

Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2011) Experimental results of an activated carbon-HFC 134a adsorption cooling system for thermal management of electronics. In: Applied Thermal Engineering, 31 (10). pp. 1607-1612.

Banker, ND and Srinivasan, K and Prasad, M (2004) Performance analysis of activated carbon + HFC-134a adsorption coolers. In: Carbon, 42 (1). pp. 117-127.

Bansal, Lalit and Basu, Saptarshi and Chakraborty, Suman (2017) Confinement suppresses instabilities in particle-laden droplets. In: SCIENTIFIC REPORTS, 7 .

Bansal, Lalit and Chakraborty, Suman and Basu, Saptarshi (2017) Confinement-induced alterations in the evaporation dynamics of sessile droplets. In: SOFT MATTER, 13 (5). pp. 969-977.

Bansal, Lalit and Hatte, Sandeep and Basu, Saptarshi and Chakraborty, Suman (2017) Universal evaporation dynamics of a confined sessile droplet. In: APPLIED PHYSICS LETTERS, 111 (10).

Bansal, Lalit and Miglani, Ankur and Basu, Saptarshi (2016) Morphological transitions and buckling characteristics in a nanoparticle-laden sessile droplet resting on a heated hydrophobic substrate. In: PHYSICAL REVIEW E, 93 (4).

Bansal, Lalit and Miglani, Ankur and Basu, Saptarshi (2015) Universal buckling kinetics in drying nanoparticle-laden droplets on a hydrophobic substrate. In: PHYSICAL REVIEW E, 92 (4).

Bansal, Lalit and Sanyal, Apratim and Kabi, Prasenjit and Pathak, Binita and Basu, Saptarshi (2018) Engineering Interfacial Processes at Mini-Micro-Nano Scales Using Sessile Droplet Architecture. In: LANGMUIR, 34 (29). pp. 8423-8442.

Bansal, Lalit and Seth, Pranjal and Murugappan, Bhubesh and Basu, Saptarshi (2018) Suppression of coffee ring: (Particle) size matters. In: APPLIED PHYSICS LETTERS, 112 (21).

Bansal, Lalit and Seth, Pranjal and Sahoo, Sumita and Mukherjee, Rabibrata and Basu, Saptarshi (2018) Beyond coffee ring: Anomalous self-assembly in evaporating nanofluid droplet on a sticky biomimetic substrate. In: APPLIED PHYSICS LETTERS, 113 (21).

Bansal, Lalit Kumar and Deepu, P and Basu, Saptarshi (2015) Experimental Analysis of Water Vapor Diffusion Through Porous Membranes in a Proton Exchange Membrane Fuel Cell. In: JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 137 (12, SI).

Bapat, VA and Kumaraswamy, HV (1980) Optimizing The Untuned Viscous Dynamic Vibration Absorber With Primary System Damping - A Frequency Locus Method - Reply. In: Journal of Sound and Vibration, 73 (3). p. 472.

Bapat, VA and Kumaraswamy, HV (1979) Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber. In: Journal of Sound and Vibration, 63 (4). pp. 469-474.

Bapat, VA and Prabhu, P (1979) Optimum design of Lanchester damper for a viscously damped single degree of freedom system by using minimum force transmissibility criterion. In: Journal of Sound and Vibration, 67 (1). pp. 113-119.

Bapat, VA and Prabhu, P (1980) Optimum design of a Lanchester damper for a viscously damped single degree of freedom system subjected to inertial excitation. In: Journal of Sound and Vibration, 73 (1). pp. 113-124.

Bapat, VA and Srinivasan, P (1969) Approximate methods for step function response of undamped non-linear spring mass systems with arbitrary hardening type spring characteristic. In: Journal of Sound and Vibration, 10 (3). pp. 430-443.

Bapat, VA and Srinivasan, P (1969) Effect of static deflection on natural frequency of non-linear spring mass system by direct linearization method. In: Journal of Sound and Vibration, 10 (3). pp. 444-446.

Bapat, VA and Srinivasan, P (1970) Free vibrations of non-linear cubic spring mass systems in the presence of coulomb damping. In: Journal of Sound and Vibration, 11 (1). pp. 121-137.

Bapat, VA and Srinivasan, P (1969) Response of Undamped Non-linear Spring Mass Systems Subjected to Constant Force Excitation. In: Journal of Sound and Vibration, 9 (3). pp. 438-446.

Bapat, VA and Srinivasan, P (1970) Step function response of non-linear spring mass systems in the presence of Coulomb damping. In: Journal of Sound and Vibration, 13 (1). pp. 51-65.

Bapat, VA and Srinivasan, p (1970) Approximate evaluation of a class of definite integrals by the methods of non-linear mechanics. In: Journal of Sound and Vibration, 12 (3). pp. 379-383.

Bardia, P and Narasimhan, R (2006) Characterisation of Pressure-sensitive Yielding in Polymers. In: Strain, 42 (3). pp. 187-196.

Barman, N and Dutta, P (2008) Rheological Behavior of Semi-solid Slurry of A356 Alloy at High Shear and Cooling Rates. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 409-414.

Barman, N and Dutta, Pradip (2008) Studies on macrosegregation and double diffusive convection during directional solidification of binary mixture. In: Materials Science And Technology, 24 (10). pp. 1230-1237.

Barman, N and Mukherjee, J and Dutta, P (2008) Numerical Simulation of Induction Heating of Aluminum Alloy Billets. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 133-138.

Barman, N and Dutta, J and Jain, P (2006) Measurement of Concentration during Solidification of a Binary Mixture. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Barman, N and Dutta, P (2012) Evolution of Microstructure During Solidification of an Aluminium Alloy Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 683-687. (In Press)

Barman, N and Dutta, P (2014) Rheology of A356 Alloy During Solidification Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 67 (1). pp. 101-104.

Barman, N and Dutta, Pradip (2009) Effect of process parameters on transport phenomena during solidification in the presence of electromagnetic stirring. In: Transactions of the Indian Institute of Metals, 62 (4-5). pp. 469-474.

Barman, N and Kumar, P and Dutta, P (2008) Studies on Transport Phenomena in Rheocasting of Al-Si alloy in Presence of Electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.

Baruah, D and Vaishakh, KV and Sreedhar, SA and Gupta, SK and Suwas, S and Narasimhan, R (2023) Notch sensitivity of combined mode I–II fracture behaviour of a rolled magnesium alloy. In: Philosophical Magazine Letters, 103 (1).

Barui, Srimanta and Panda, Asish K and Naskar, S and Kuppuraj, R and Basu, Saptarshi and Basu, Bikramjit (2019) 3D inkjet printing of biomaterials with strength reliability and cytocompatibility: Quantitative process strategy for Ti-6Al-4V. In: BIOMATERIALS, 213 .

Basak, Anup and Nandakumar, K and Chatterjee, Anindya (2011) Decoupled three-dimensional finite element computation of thermoelastic damping using Zener's approximation. In: Meccanica, 46 (2). pp. 371-381.

Basha, Saleem M and Bansal, Lalit and Sarma, Durgesh and Basu, Saptarshi and Kumar, Pramod and Ambirajan, Amrit (2013) Solar thermal power system augmented with LHP. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 295-304.

Baskar, Sam S and Ashwin, Lal and Madhavi, S and Rudra, Pratap (2009) Design of Piezoelectric MEMS Cantilever for High Speed AFM. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Bassayya, K and Bhattacharya, K and Shrinivasa, U (2000) Eight-node brick, PN340, represents constant stress fields exactly. In: Computers and Structures, 74 (4). pp. 441-460.

Bassayya, K and Shrinivasa, U (2000) A 14-node brick element, PN5X1, exactly representing linear stress fields. In: Computers and Structures, 74 (2). pp. 147-165.

Bassayya, K and Shrinivasa, U (2000) A 14-node brick element, PN5X1, for plates and shells. In: Computers and Structures, 74 (2). pp. 167-178.

Basu, R (1980) Computer study of the composition of some amorphous-alloys - metallic glasses. In: Indian Journal of Pure & Applied Physics, 18 (2). pp. 67-70.

Basu, R (1980) Computer-simulation of ternray miscibility gap in the ternray alloy PD77.5 CU6 SI16.5. In: Indian Journal of Pure & Applied Physics, 18 (3). pp. 147-149.

Basu, R (1981) Dislocation Mobilities In Zinc. In: Indian Journal of Pure & Applied Physics, 19 (5). pp. 485-486.

Basu, S and Agarwal, AK and Mukhopadhyay, A and Patel, C (2017) Introduction to Application Paradigms of Droplets and Spray Transport. [Book Chapter]

Basu, S and Agarwal, AK and Mukhopadhyay, A and Patel, C (2017) Introduction to Droplets and Sprays: Applications for Combustion and Propulsion. [Book Chapter]

Basu, S and Chaudhuri, S and Cetegen, BM and Saha, A (2018) Mixing dynamics in interacting vortices. [Book Chapter]

Basu, S and Kabi, P and Chaudhuri, S and Saha, A (2020) Insights on drying and precipitation dynamics of respiratory droplets from the perspective of COVID-19. In: Physics of Fluids, 32 (12).

Basu, S and Narasimhan, R (2000) A comparative study of dynamic,ductile fracture initiation in two specimen configurations. In: International Journal of Fracture, 102 (4). pp. 393-410.

Basu, S and Rao, DCK and Chattopadhyay, A and Chakraborty, J (2021) Dissolution dynamics of a vertically confined sessile droplet. In: Physical Review E, 103 (1).

Basu, Saptarshi and Bansal, Lalit and Miglani, Ankur (2016) Towards universal buckling dynamics in nanocolloidal sessile droplets: the effect of hydrophilic to superhydrophobic substrates and evaporation modes. In: SOFT MATTER, 12 (22). pp. 4896-4902.

Basu, Saptarshi and Bansal, Lalit and Miglani, Ankur (2016) Towards universal buckling dynamics in nanocolloidal sessile droplets: the effect of hydrophilic to superhydrophobic substrates and evaporation modes. In: SOFT MATTER, 12 (22). pp. 4896-4902.

Basu, Saptarshi and Miglani, Ankur (2016) Combustion and heat transfer characteristics of nanofluid fuel droplets: A short review. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 96 . pp. 482-503.

Basu, Saptarshi and Saha, Abhishek and Kumar, Ranganathan (2013) Criteria for thermally induced atomization and catastrophic breakup of acoustically levitated droplet. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 59 . pp. 316-327.

Basu, Saptarshi and Saha, Abhishek and Kumar, Ranganathan (2012) Thermally induced secondary atomization of droplet in an acoustic field. In: Applied Physics Letters, 100 (5).

Basu, Saptarshi and Tijerino, Erick and Kumar, Ranganathan (2013) Insight into morphology changes of nanoparticle laden droplets in acoustic field. In: Applied Physics Letters, 102 (14). 141602_1-141602_5.

Basu, Sumit and Narasimhan, R (1996) Finite Element Simulation of Mode I Dynamic, Ductile Fracture Initiation. In: International Journal of Solids and Structures, 33 (8). pp. 1191-1207.

Basu, Sumit and Narasimhan, R (1999) A Finite Element Study Of The Effects Of Material Characteristics And Crack Tip Constraint On Dynamic Ductile Fracture Initiation A Finite Element Study Of The Effects Of Material Characteristics And Crack Tip Constraint On Dynamic Ductile Fracture Initiation. In: Journal of The Mechanics And Physics of Solids, 47 (2). pp. 325-350.

Basu-Mandal, Pradipta and Chatterjee, Anindya and Papadopoulos, JM (2007) Hands-free circular motions of a benchmark bicycle. In: Proceedings of the Royal Society A- Mathematical Physical & Engineering Sciences, 463 (2084). pp. 1983-2003.

Basumatary, R and Dutta, P and Prasad, M and Srinivasan, K (2005) Thermal modeling of activated carbon based adsorptive natural gas storage system. In: Carbon, 43 (3). pp. 541-549.

Behera, A and Dehury, J and Rayaguru, BP (2023) The Consequence of SiC Filler Content on the Mechanical, Thermal, and Structural Properties of a Jute/Kevlar Reinforced Epoxy Hybrid Composite. In: Silicon .

Behera, A and Thawre, MM and Ballal, A and Manjunatha, CM and Krishnakumar, D and Chandankhede, S (2022) A modified piecewise linear constant life diagram for fatigue life prediction of carbon fiber/polymer multidirectional laminates. In: Polymer Composites .

Behera, AK and Rahaman, MM and Roy, D (2024) A residual stress-dependent mixed-mode phase-field model: Application to assessing the role of tailored residual stresses on the mechanical performance of ceramic laminates. In: Mechanics of Materials, 188 .

Behera, AR and Dangi, A and Pratap, R (2018) An experimental study of residual stress induced modulation of vibration characteristics in 1-D MEMS resonators. In: Materials Performance and Characterization, 7 (4).

Behera, Ramesh Chandra and Dutta, Pradip and Srinivasan, K (2007) Numerical Study of Interrupted Impinging Jets for Cooling of Electronics. In: IEEE Transactions on Components and Packaging Technologies, 30 (2). pp. 275-284.

Bhadauriya, Sonal and Kapadia, Harshit and Dalal, Amaresh and Sarkar, Sandip (2018) Effect of channel confinement on wake dynamics and forced convective heat transfer past a blunt headed cylinder. In: INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 124 . pp. 467-476.

Bhandakkar, TK and Jog, CS (2005) An alternative numerical implementation of the Burnett family of acoustic infinite elements. In: Journal of the Acoustical Society of America, 118 (4). pp. 2295-2301.

Bhandari, Akshita and Gupta, Ashutosh and Das, Debasis (2017) Betweenness centrality updation and community detection in streaming graphs using incremental algorithm. In: 6th International Conference on Software and Computer Applications, ICSCA 2017, 26- 28 February 2017, Bangkok, pp. 159-164.

Bharadwaj, Kishor KS and Ramesh, T and Ananthasuresh, GK (2019) Non-dimensionalized Feasibility Maps for Designing Compliant Mechanisms. [Book Chapter]

Bharat, B and Sonti, VR (2018) Multi-mode interactions in a nonlinear structural-acoustic cylindrical waveguide. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, INTER-NOISE 2018, 26 - 29 August 2018, Chicago.

Bharat, B and Sonti, VR (2020) Self and cross-mode interactions in a weakly nonlinear two-dimensional structural-acoustic waveguide. In: Journal of the Acoustical Society of America, 147 (4). pp. 2499-2510.

Bharat, Biswajit and Sonti, Venkata R (2019) Resonance and beating phenomenon in a nonlinear rigid cylindrical acoustic waveguide: The axisymmetric mode. In: JOURNAL OF SOUND AND VIBRATION, 458 . pp. 262-275.

Bharathidasan, T and Kumar, Vijay S and Bobji, MS and Chakradhar, RPS and Basu, Bharathibai J (2014) Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces. In: APPLIED SURFACE SCIENCE, 314 . pp. 241-250.

Bhargav, Santosh DB and Jorapur, Nikhil and Ananthasuresh, GK (2013) Evaluating Bulk Stiffness of MCF-7 Cells using Micro-scale Composite Compliant Mechanisms. In: Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNacoMM 2013), December 18-20, 2013.

Bhargav, Santosh DB and Chakravarthy, Shanthanu and Ananthasuresh, GK (2012) A Compliant End-Effector to Passively Limit the Force in Tele-Operated Tissue-Cutting. In: JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 6 (4).

Bhargav, Santosh DB and Jorapur, Nikhil and Ananthasuresh, GK (2015) Micro-scale composite compliant mechanisms for evaluating the bulk stiffness of MCF-7 cells. In: MECHANISM AND MACHINE THEORY, 91 . pp. 258-268.

Bhargav, Santosh DB and Kandasami, Ramesh K and Murthy, Tejas G and Ananthasuresh, GK (2015) Design of a Portable Compliant Device for Estimating the Failure-Load of Mesoscale Cemented Sand Specimens. In: JOURNAL OF MECHANICAL DESIGN, 137 (6).

Bhargav, Santosh DB and Singh, Gaurav and Ananthasuresh, GK (2014) COMPOSITE AND MULTI-SCALE COMPLIANT MECHANISMS FOR MANIPULATION AND MECHANICAL CHARACTERIZATION. In: ASME International Design Engineering Technical Conferences / Computers and Information in Engineering Conference (IDETC/CIE), AUG 04-07, 2013, Portland, OR.

Bhargav, Santosh DB and Varma, Harish I and Ananthasuresh, GK (2014) NON-DIMENSIONAL KINETOELASTOSTATIC MAPS FOR COMPLIANT MECHANISMS. In: ASME International Design Engineering Technical Conferences / Computers and Information in Engineering Conference (IDETC/CIE), AUG 04-07, 2013, Portland, OR.

Bhaskar, AB and Krishnan, G and Ananthasuresh, GK (2007) A Meso-scale Accelerometer using a Hall-effect Sensor and a Displacement-amplifying Compliant Mechanism. In: UNSPECIFIED.

Bhaskar, Dasgupta and TS, Mruthyunjaya (1998) A Newton-Euler formulation for the inverse dynamics of the Stewart platform manipulator. In: Mechanism and Machine Theory, 33 (8). 1135 -1152.

Bhaskar, Dasgupta and Mruthyunjaya, TS (1996) A constructive predictor-corrector algorithm for the direct position kinematics problem for a general 6-6 Stewart platform. In: Mechanism and Machine Theory, 31 (6). pp. 799-811.

Bhat, Navakanta Thejas and Pratap, Rudra (2009) High Accuracy Angular Rate Sensing using GyroFET. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Bhat, Nikhil and Kumar, Senthil and Tan, Wayne and Narasimhan, Ramarthinam and Low, Tsu Chuin (2012) Performance of inherently compensated flat pad aerostatic bearings subject to dynamic perturbation forces. In: PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 36 (3). pp. 399-407.

Bhat, S and Ananthasuresh, GK (2023) Actuation of Ferrobots in a Plane for Independent and Swarm Motion Using a Grid of Electromagnets. In: 6th International Conference on Manipulation, Automation, and Robotics at Small Scales, MARSS 2023, 9-13 October 2023, Abu Dhabi.

Bhat, S and Ananthasuresh, GK (2022) Control of Multiple Ferro-Bots for Steady Motion Using an Array of Electromagnets. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 395-405.

Bhat, SS and Govardhan, RN (2011) Stall flutter of blades at low Reynolds numbers. In: 2011 IUTAM Symposium on Bluff Body Flows, Blubof 2011, 12 December 2011 through 16 December 2011, Kanpur, pp. 159-162.

Bhat, Shantanu S and Govardhan, Raghuraman N (2013) Stall flutter of NACA 0012 airfoil at low Reynolds numbers. In: Journal of Fluids and Structures, 41 . pp. 166-174.

Bhatt, MS and Srinivasan, K and Murthy, Krishna MV and Seetharamu, S (1992) Thermodynamic modelling of absorption-resorption heating cycles with some new working pairs. In: Heat Recovery Systems and CHP, 12 (3). pp. 225-233.

Bhatt, MS and Srinivasan, K and Murthy, MVK and Seetharamu, S (1994) Absorption-resorption heating cycles with the new working pairs R21-NMP and R21-DMA. In: Energy conversion and management, 35 (5). 443 -451.

Bhattacharya, Anirban and Dutta, Pradip (2014) Effect of shrinkage induced flow on binary alloy dendrite growth: An equivalent undercooling model. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 57 . pp. 216-220.

Bhattacharya, Anirban and Dutta, Pradip (2013) Role of convection in microstructure evolution during solidification. In: Current Science, 105 (4). pp. 480-485.

Bhattacharya, Anirban and Dutta, Pradip (2013) An enthalpy-based model of dendritic growth in a convecting binary alloy melt. In: INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 23 (7). pp. 1121-1135.

Bhattacharya, Anirban and Karagadde, Shyamprasad and Dutta, Pradip (2013) An equivalent undercooling model to account for flow effect on binary alloy dendrite growth rate. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 47 . pp. 15-19.

Bhattacharya, Anirban and Kiran, Apoorva and Karagadde, Shyamprasad and Dutta, Pradip (2014) An enthalpy method for modeling eutectic solidification. In: JOURNAL OF COMPUTATIONAL PHYSICS, 262 . pp. 217-230.

Bhattacharya, Atmadeep and Basu, Saptarshi (2019) An investigation into the heat release and emissions from counterflow diffusion flames of methane/dimethyl ether/hydrogen blends in air. In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 44 (39). pp. 22328-22346.

Bhattacharya, S and Ananthasuresh, GK and Ghosal, A (2018) Design of a one-dimensional flexible structure for desired load-bearing capability and axial displacement. In: Mechanics Based Design of Structures and Machines, 46 (3). pp. 376-399.

Bhattacharyya, Abir and Singh, Gaurav and Prasad, Eswar K and Narasimhan, R and Ramamurty, U (2015) On the strain rate sensitivity of plastic flow in metallic glasses. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 625 . pp. 245-251.

Bhavikatti, Shivanand and Ranganath, R and Ghosal, A (2007) A near-singular, flexure jointed, moment sensitive Stewart platform based fore-torque sensor. In: 13th National Conference on Mechanisms and Machines (NaCoMM07, December 12-13, 2007, IISc, Bangalore.

Bhimarasetty, Aravind and Govardhan, Raghuraman N (2010) A simple method for potential flow simulation of cascades. In: Sadhana : Academy Proceedings in Engineering Sciences, 35 (6). pp. 649-657.

Bhogal, P and Pederzani, G and Grytsan, A and Loh, Y and Brouwer, PA and Andersson, T and Gundiah, N and Robertson, AM and Watton, PN and Söderman, M (2019) The unexplained success of stentplasty vasospasm treatment: Insights using Mechanistic Mathematical Modeling. In: Clinical Neuroradiology, 29 (4). pp. 763-774.

Bhoite, Mayur T and Narasimham, GSVL (2008) Turbulent mixed convection in a shallow enclosure with a series of heat generating components. In: International Journal of Thermal Sciences, 48 (5). pp. 948-963.

Bhople, N and Mastud, S and Mittal, R (2022) Metallurgical and machining performance aspects of cryotreated tungsten carbide micro-end mill cutters. In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture .

Bhosale, Vijay H and Thomas, Joy M and Pande, DC (2016) Experimental Investigations on the Pulsed Power Switch of a HIRA based UWB System. In: IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 58 (4, 2, ). pp. 1282-1288.

Bhowmick, H and Majumdar, SK and Biswas, SK (2012) Dry tribology and nanomechanics of gaseous flame soot in comparison with carbon black and diesel soot. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 226 (C2). pp. 394-402.

Bhowmick, Hiralal and Biswas, SK (2011) Relationship Between Physical Structure and Tribology of Single Soot Particles Generated by Burning Ethylene. In: Tribology Letters, 44 (2). pp. 139-149.

Bhowmick, Hiralal and Biswas, SK (2011) Tribology of ethylene-air diffusion flame soot under dry and lubricated contact conditions. In: Journal of Physics D: Applied Physics, 44 (48).

Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2013) Influence of physical structure and chemistry of diesel soot suspended in hexadecane on lubrication of steel-on-steel contact. In: Wear, 300 (1-2). pp. 180-188.

Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2012) Tribology of soot suspension in hexadecane as distinguished by the physical structure and chemistry of soot particles. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 45 (17).

Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.

Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.

Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.

Biswas, SK and Devaprakasam, D (2006) Stress induced phase transition in monomolecular perfluroalkylsilane film self assembled on aluminium surface. In: Symposium on Surface Engineering for Manufacturing Applications held at the 2005 MRS Fall Meeting, Nov 28-Dec 01, 2005, Boston, MA,, pp. 241-246.

Biswas, Ishita and Ghosh, Ranajay and Sadrzadeh, Mohtada and Kumar, Aloke (2018) Near wall void growth leads to disintegration of colloidal bacterial streamer. In: JOURNAL OF COLLOID AND INTERFACE SCIENCE, 522 . pp. 249-255.

Biswas, Ishita and Sadrzadeh, Mohtada and Kumar, Aloke (2018) Impact of bacterial streamers on biofouling of microfluidic filtration systems. In: BIOMICROFLUIDICS, 12 (4).

Biswas, P and Narasimhan, R (2012) Quasi-static crack tip fields in rate-sensitive FCC single crystals. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 37 (1, SI). pp. 149-169.

Biswas, P and Narasimhan, R (2002) A numerical study of constraint effects on dynamic ductile crack initiation. In: Mechanics of Materials, 34 (9). pp. 577-592.

Biswas, P and Narasimhan, R and Kumar, AM (2013) Interaction between a notch and cylindrical voids in aluminum single crystals: Experimental observations and numerical simulations. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61 (4). pp. 1027-1046.

Biswas, P and Narasimhan, R and Tewari, A (2011) Influence of crack tip constraint on void growth in ductile FCC single crystals. In: Materials Science and Engineering A, 528 (3). pp. 823-831.

Biswas, S and Bose, SC and Bhave, SK and Bai, Pramila BN and Biswas, SK (1992) Study of corrugations in motor bearings. In: Tribology International, 25 (1). pp. 27-36.

Biswas, S and Govardhan, RN (2020) Effect of single and multiple bubbles on a thin vortex ring. In: Journal of Flow Visualization and Image Processing, 27 (1). pp. 1-27.

Biswas, S and Govardhan, RN (2024) Effects of salt concentration on top wall bubble injection in a turbulent channel flow: bubble dynamics and wall drag reduction. In: Experiments in Fluids, 65 (3).

Biswas, S and Govardhan, RN (2022) Interaction of a rigid buoyant sphere and a deforming bubble with a vortex ring: The role of deformability. In: Physical Review Fluids, 7 (9).

Biswas, S and Govardhan, RN (2023) Vortex ring and bubble interaction: Effects of bubble size on vorticity dynamics and bubble dynamics. In: Physics of Fluids, 35 (8).

Biswas, SK (1993) Debiprasad Chattopadhyaya - The modern Indian sage. In: Current Science (Bangalore), 65 (11). pp. 889-891.

Biswas, SK (1985) Monoblock cylinder internally pressurised under asymmetric end constraints Some aspects of design. In: International Journal of Mechanical Sciences, 27 (5). pp. 325-334.

Biswas, SK (1997) Siding wear of materials. In: 1st World Tribology Congress - New Directions in Tribology, Sep 08, 1996-Sep 12, 1997, London, England.

Biswas, SK (2000) Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactions. In: Wear, 245 (1-2). pp. 178-189.

Biswas, SK (2002) Wear of metals: a consequence of stable/unstable material response. In: Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 216 (J6). 357-369 .

Biswas, SK and Pramila Bai, BN (1981) Dry wear of al-graphite particle composites. In: WearWear, 68 (3). pp. 347-358.

Biswas, SK and Ramesh, M (1991) Study of forging design using slip-line fields. In: Journal of Materials Processing Technology, 25 (1). pp. 1-13.

Biswas, SK and Rao, KVJ (1985) Flow of metal into the flash gap in the last stages of a plane-strain closed-die forging operation. In: Journal of Mechanical Working Technology, 11 (3). pp. 319-331.

Biswas, SK and Singh, Arvind R (2002) Wear of metals-influence of some primary material properties. In: Tribology Letters, 13 (3). pp. 203-207.

Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. In: Journal of Materials Science, 23 (5). pp. 1877-1885.

Biswas, Sanjay Kumar and Devaprakasam, D (2005) Stress induced phase transition in a monomolecular perfluroalkylsilane film self assembled on aluminium surface. In: MRS Proceedings, 890 . Y08-33.

Biswas, Somjeet and ingh, Satyaveer D and Suwas, Satyam (2009) Grain Growth in ECAE Processed Pure Magnesium. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, Jamshedpur, pp. 465-473.

Biswasa, SK and Rao, KVJ (1983) Flow of metal in a wedge-shaped cavity. In: Journal of Mechanical Working Technology, 8 (1). pp. 27-41.

Biswasa, SK and Shantharam, A and Rao, NAP and Swamy, K Narayana and Rohatgi, PK and Biswas, SK (1980) Performance of graphic aluminium particulate composite materials. In: Tribology International, 13 (4). pp. 171-176.

Biswasa, SK and Vidyasagar, A (1985) Flow of metal in constrained plane-strain extrusion forging- Part II. In: Journal of Mechanical Working Technology, 11 (2). pp. 139-149.

Bobji, MS and Biswas, SK (1996) Determination and study of the strength of the blister field generated by conical indentation. In: Philosophical Magazine A, 73 (2). pp. 399-413.

Bobji, MS (2007) Non contact Deformation Measurement of Large Space Structures Using Digital Image Correlation. In: Conference on Advances in Space Science and Technology, , 2007, Bangalore.

Bobji, MS (2005) Springing the trap. In: Journal of Biosciences, 30 (2). pp. 143-146.

Bobji, MS and Biswas, SK (1999) Deconvolution of hardness from data obtained from nanoindentation of rough surfaces. In: Journal Of Materials Research, 14 (6). pp. 2259-2268.

Bobji, MS and Biswas, SK (1998) Estimation of hardness by nanoindentation of rough surfaces. In: Journal of Materials Research, 13 (11). pp. 3227-3233.

Bobji, MS and Biswas, SK (1999) Hardness of a surface containing uniformly spaced pyramidal asperities. In: Tribology Letters, 7 (1). pp. 51-56.

Bobji, MS and Biswas, SK (1997) Numerical simulation of nano-indentation on rough surfaces. In: 10th International Conference on Surface Modification Technologies, 2-4 Sept. 1997, Singapore; Singapore.

Bobji, MS and Biswas, SK and Pethica, JB (1997) Effect of roughness on the measurement of nanohardness—a computer simulation study. In: Applied Physics Letters, 71 (8). pp. 1059-1061.

Bobji, MS and Govardhan, RN (2009) Designing superhydrophobic surfaces for underwater applications. In: Conference on Recent Advances in Surface Engineering (RASE09), 26-27 February, 2009, NAL, Bangalore.

Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.

Bobji, MS and Pendyala, Prashant and Gupta, Preeti and Kalode, Pranav (2011) Effect of porosity on the indentation behaviour of nanoporous alumina films. In: International Journal of Surface Science and Engineering, 5 (1, Sp.). pp. 51-62.

Bobji, MS and Pethica, JB and Inkson, BJ (2005) Indentation mechanics of Cu-Be quantified by an in situ transmission electron microscopy mechanical probe. In: Journal of Materials Research, 20 (10). pp. 2726-2732.

Bobji, MS and Selvan, Arul K (2009) Mechanical Machining for Nano manufacturing. In: Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6) , 11-12 December, 2009, Coimbatore.

Bobji, MS and Shivakumar, K and Alehossein, H and Venkateshwarlu, V and Biswas, SK (1999) Influence of surface roughness on the scatter in hardness measurements - a numerical study. In: International Journal of Rock Mechanics and Mining Sciences, 36 (3). pp. 399-404.

Bobji, MS and Venkatesh, K and Biswas, SK (1999) Roughness generated in surface grinding of metals. In: Journal of Tribology, 121 (4). pp. 746-752.

Bobji, MS and Xavier, Shijo and Badole, Rupesh and Solomon, Christopher and Raddaiah, T and Chandra, Piyush and Haldar, Sandip (2006) A Comparative Study of Roughness Parameters for Different Surfaces. In: International Conference on Industrial Tribology.

Bobji, MS and Xavier, Shijo and Jayadeep, UB and Jog, CS (2010) Adhesion-Induced Instability in Asperities. In: Tribology Letters, 39 (2). pp. 201-209.

Bobji, Musuvathi S and Balan, Ganesh and Govardhan, Raghuraman N (2011) Time dependent superhydrophobicity of drag reducing surfaces. In: 3rd Micro and Nano Flows Conference (MNF2011), 22-24 August 2011, Thessaloniki, Greece.

Bobji, Musuvathi S and Kumar, S Vijay and Asthana, Ashish and Govardhan, Raghuraman N (2009) Underwater Sustainability of the ``Cassie'' State of Wetting. In: Langmuir, 25 (20). pp. 12120-12126.

Bodkhe, S and Ananthasuresh, G K (2021) Multi-patch Isogeometric Analysis of Planar Compliant Mechanisms. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019 - 20 December 2019, Bengaluru, pp. 671-690.

Boggavarapu, P and Mallikarjun, AB and Mendu, H and Ramraju, VN and Krishnamachari, S and Pandey, SK and Sadagopan, SK and Ravikrishna, RV (2024) Performance and Emission Measurement of Spark Ignition Engines Operating with 100 Methanol Fuel. In: Heat Transfer Engineering .

Boggavarapu, P and Ramesh, SP and Avulapati, MM and RV, R (2021) Secondary breakup of water and surrogate fuels: Breakup modes and resultant droplet sizes. In: International Journal of Multiphase Flow, 145 .

Boggavarapu, P and Surya Prakash, R and Ravikrishna, RV (2020) Experimental study on secondary breakup regimes and resultant droplet sizes for water and surrogate fuels. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-28 July 2018, Chicago; United States.

Boggavarapu, Prasad and Ravikrishna, R (2019) Evaporating spray characteristics of a diesel-ethanol micro-emulsion. In: FUEL, 246 . pp. 104-107.

Boggavarapu, Prasad and Ravikrishna, R (2019) Quantitative vapour concentration measurements in n-dodecane and n-hexadecane sprays. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 102 . pp. 397-405.

Boggavarapu, Prasad and Ravikrishna, RV (2016) A COMPARISON OF DIESEL AND JATROPHA METHYL ESTER (JME) SPRAY CHARACTERISTICS: EFFECT OF NOZZLE ENTRY RADIUS. In: ATOMIZATION AND SPRAYS, 26 (10). pp. 961-982.

Boggavarapu, Prasad and Ravikrishna, RV (2018) A COMPARISON OF EVAPORATING SPRAY STRUCTURE OF JATROPHAMETHYL ESTER AND DIESEL, AND SURROGATE FUELS. In: ATOMIZATION AND SPRAYS, 28 (9). pp. 797-809.

Boggavarapu, Prasad and Ravikrishna, RV (2019) Quantitative vapour concentration measurements in n-dodecane and n-hexadecane sprays. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 102 . pp. 397-405.

Boggavarapu, Prasad and Ravikrishna, RV (2013) Review on atomization and sprays of biofuels for IC engine applications. In: International Journal of Spray and Combustion Dynamics, 5 (2). pp. 85-121.

Boggavarapu, Prasad and Ray, Baidurja (2014) Thermal Efficiency of LPG and PNG-fired burners: Experimental and numerical studies. In: FUEL, 116 . pp. 709-715.

Boggavarpu, P and Ravikrishna, RV (2017) Experimental studies on non-evaporating and evaporating sprays of n-dodecane and n-hexadecane. In: 9th International Conference on Modeling and Diagnostics for Advanved Engine Systems, 25 July 2017, Okayama.

Boniface, V and Simha, KRY (1997) Invariant points on energy contours around a crack tip under mixed mode loading. In: International Journal of Fracture, 86 (4). pp. 301-325.

Boniface, V and Simha, KRY (1995) Plastic energy dissipation in mixed-mode fracture. In: International Journal of Fracture, 73 (1). R3-R8.

Boniface, V and Simha, KRY (1999) Re-examination of crack opening model of interface fracture. In: Engineering Fracture Mechanics, 64 (6). pp. 677-691.

Boniface, V and Simha, KRY (2001) Suppression of complex singularity using wedge interphase in interface fracture. In: International Journal of Solids and Structures, 38 (30-31). pp. 5411-5420.

Boniface, V and Simha, KRY (1991) A plastic zone model of mixed mode fracture. In: International Journal of Fracture, 48 (1). R9-R12.

Briscoe, BJ and Biswas, SK and Sinha, SK and Panesar, SS (1993) The scratch hardness and friction of a soft rigid-plastic solid. In: Tribology International, 26 (3). pp. 183-193.

Briscoe, BJ and Evans, PD and Biswas, SK and Sinha, SK (1996) The hardnesses of poly(methylmethacrylate). In: Tribology International, 29 (2). pp. 93-104.

Buni, SY and Raman, N and Seshan, S (1997) Effect of spatial distribution of graphite and matrix on dry sliding wear of cast irons. In: Materials Science and Technology, 13 (9). pp. 749-753.

Buni, Yusuf S and Raman, N and Seshan, S (1993) Wear characteristics of different types of cast iron. In: Metals Materials and Processes, 5 (2). pp. 111-117.

Buni, SY and Raman, N and Seshan, S (1995) Characterization of cast irons for optimum performance by overall rating method. In: Metals Materials and Processes, 7 (2). pp. 93-97.

Buni, SY and Raman, N and Seshan, S (1996) Effect of structural features on erosion resistance of cast irons. In: Tribology Letters, 2 (1). 99 - 111.

Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.

C

Chaitanaya, Choudary P and Munjal, ML (2011) Tuning of the extended concentric tube resonators. In: International Journal of Acoustics and Vibration, 16 (3). pp. 111-118.

Chaitanya, P and Munjal, ML (2009) Direct measurement of the four-pole parameters of an acoustic element. In: UNSPECIFIED, November 2009, Hyderabad.

Chaitanya, P and Munjal, ML (2011) Effect of wall thickness on the end corrections of the extended inlet and outlet of a double-tuned expansion chamber. In: Applied Acoustics, 72 (1). pp. 65-70.

Chaitanya, P and Munjal, ML (2011) Experimental validation of the 1-D acoustical model for conical concentric tube resonators with moving medium. In: Noise Control Engineering Journal (NCEJ), 59 (2). pp. 158-164.

Chaitanya Kumar Rao, D and Basu, S (2020) Phenomenology of disruptive breakup mechanism of a levitated evaporating emulsion droplet. In: Experimental Thermal and Fluid Science, 115 .

Chakraborty, Ishita and Mohanty, Atanu K and Chatterjee, Anindya (2008) Localized waves along a line of masses on a plate: propagation and sub-exponential attenuation. In: Proceedings of the Royal Society A- Mathematical, Physical and Engineering Sciences, 464 (2097). pp. 2229-2246.

Chakraborty, S and Dutta, P (1999) A scaling analysis for transport phenomena during alloy solidification in a rectangular cavity. In: Journal Of Materials Processing & Manufacturing Science, 7 (3). pp. 236-250.

Chakraborty, Suman and Dutta, Pradip (2005) Effects of Solutal Undercooling on Three-Dimensional Double-Diffusive Convection and Macrosegregation during Solidification of a Binary Alloy. In: Numerical Heat Transfer Part A: Applications, 48 (3). pp. 261-281.

Chakraborty, Suman and Dutta, Pradip (2002) The effect of solutal undercooling on double-diffusive convection and macrosegregation during binary alloy solidification: a numerical investigation. In: International Journal for Numerical Methods in Fluids, 38 (9). pp. 895-917.

Chakraborty, N and Chakraborty, S (2002) A generalized object-oriented computational method for simulation of power and process cycles. In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 216 (2). pp. 155-159.

Chakraborty, Nilanjan and Chakraborty, Suman and Dutta, Pradip (2003) Modelling of turbulent transport in arc welding pools. In: International Journal of Numerical Methods for Heat and Fluid Flow, 13 (1). 07-30.

Chakraborty, Nilanjan and Ghosal, Ashitava (2005) Dynamic Modeling and Simulation of a Wheeled Mobile Robot for Traversing Uneven Terrain Without Slip. In: Journal of Mechanical Design, 127 (5). pp. 901-909.

Chakraborty, Nilanjan and Ghosal, Ashitava (2004) Kinematics of wheeled mobile robots on uneven terrain. In: Mechanism and Machine Theory, 39 (12). pp. 1273-1287.

Chakraborty, P and Kumar, A and Dutta, P (2008) Experimental and Numerical studies on Settling of Solid Crystals during Freezing of Aqueous Ammonium Chloride Solution. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Chakraborty, Prodyut R and Dutta, Pradip (2011) A Generalized Enthalpy Update Scheme for Solidification of a Binary Alloy with Solid Phase Movement. In: Metallurgical and Materials Transactions B, 42 (6). pp. 1075-1079.

Chakraborty, S and Chakraborty, N and Kumar, P and Dutta, P (2003) Studies on turbulent momentum, heat and species transport during binary alloy solidification in a top-cooled rectangular cavity. In: International Journal of Heat and Mass Transfer, 46 (7). pp. 1115-1137.

Chakraborty, S and Dutta, P (2002) Scaling analysis of momentum, heat, and mass transfer in binary alloy solidification problems. In: Materials Science and Technology, 18 (6). 600-606 .

Chakraborty, S and Dutta, P (2003) Three-dimensional double-diffusive convection and macrosegregation during non-equilibrium solidification of binary mixtures. In: International Journal of Heat and Mass Transfer, 46 (12). pp. 2115-2134.

Chakraborty, S and Dutta, P (2000) A generalized algorithm for modelling phase change problems in materials processing. In: Current Science, 78 (7). pp. 887-891.

Chakraborty, S and Sarkar, S and Dutta, P (2001) Effect of constitutional supercooling on the numerical solution of species concentration distribution in laser surface alloying. In: Metallurgical and Materials Transactions B, 32 (5). pp. 969-972.

Chakraborty, S and Sarkar, S and Dutta, P (2002) Scaling analysis of momentum and heat transport in gas tungsten arc weld pools. In: Science and Technology of Welding & Joining, 7 (2). 88-94 .

Chakraborty, Suman and Dutta, Pradip (2003) Analytical solutions for heat transfer during cyclic melting and freezing of a phase change material used in electronic or electrical packaging. In: Journal of Electronic Packaging, 125 (1). pp. 126-133.

Chakraborty, Suman and Dutta, Pradip (2004) Effects of solid layer thickness and nominal composition on double-diffusive instabilities during solidification of a binary alloy cooled from the top. In: International Journal of Heat and Mass Transfer, 47 (1). pp. 185-190.

Chakraborty, Suman and Dutta, Pradip (2002) Numerical modeling of heat and mass transfer in laser surface alloying: Non-equilibrium solidification effects. In: Materials and Manufacturing Processes, 17 (4). 455-468 .

Chakraborty, Suman and Dutta, Pradip (2002) An analytical solution for conduction-dominated unidirectional solidification of binary mixtures. In: Applied Mathematical Modelling, 26 (4). pp. 545-561.

Chakraborty, Suman and Kumar, Aloke and Sen, Prosenjit (2018) Special Issue on Microfluidics: Theory and Applications. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 98 (2, SI). pp. 83-84.

Chakravarthula, PN and Shekhar, S and Ananthasuresh, GK (2019) Attachment, detachment, and navigation of small robots using local magnetic fields. In: 4th International Conference on Manipulation, Automation, and Robotics at Small Scales, MARSS 2019, 1 - 5 July 2019, Helsinki.

Chakravarthy, Shanthanu and Aditya, K and Ghosal, Ashitava (2014) Experimental Characterization and Control of Miniaturized Pneumatic Artificial Muscle. In: JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 8 (4).

Chakravarthy, Shanthanu and Balakuntala, Mythra VS and Rao, Ashwin M and Thakur, Ravi Kumar and Ananthasuresh, GK (2018) Development of an integrated haptic system for simulating upper gastrointestinal endoscopy. In: MECHATRONICS, 56 . pp. 115-131.

Chakroborty, Suman and Dutta, Pradip (2001) A generalized formulation for evaluation of latent heat functions in enthalpy-based macroscopic models for convection-diffusion phase change processes. In: Metallurgical and Materials Transactions B, 32 (3). pp. 562-564.

Chandra, NK and Ghosh, UU and Saha, A and Kumar, A (2021) Contact Line Pinning and Depinning Can Modulate the Rod-Climbing Effect. In: Langmuir .

Chandra, NK and Kumar, A and Ghosh, R (2020) Streamer formation in particle laden polymeric flows. In: ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 Fluids, 13-15 July 2020.

Chandra, NK and Lahiri, K and Kumar, A (2022) Contact angle hysteresis can modulate the Newtonian rod-climbing effect. In: Physics of Fluids, 34 (9).

Chandra, R and Krishnamurthy, MV and Jacob, S and Kasthurirengan, S and Karunanithi, R (1996) Effect of vacuum on the mass flow characteristics of a horizontal liquid nitrogen transfer line. In: Vacuum, 47 (11). pp. 1379-1384.

Chandra, S and Kumari, M and Naik, RT (2020) Feeder Transit Service Efficiencies with Vehicle-to-Passenger (V2P) Communication. In: 2nd International Conference on Computing Analytics and Networking, 14-15 December 2019, Bhubaneswar, India, pp. 437-445.

Chandra, S and Naik, RT and Jimenez, J (2020) Crowdsourcing for Mode Shift: An Empirical Evidence of its Success among College Students. In: 2019 World Conference Transport Research, 26-31 May 2019, Indian Institute of Technology Mumbai, pp. 1430-1434.

Chandra, S and Naik, RT and Jimenez, J (2020) A Framework for Smart Freight Mobility with Crowdsourcing. In: Transportation Research Procedia, 26-31 May 2019, Indian Institute of Technology Mumbai, pp. 494-502.

Chandra, S and Naik, RT and Nguyen, A (2020) A New Freight Truck Resiliency Indicator with Connected Vehicle Technology. In: 2019 World Conference Transport Research, WCTR 2019, 26-31 May 2019, Indian Institute of Technology Mumbai, pp. 486-493.

Chandra, S and Naik, RT and Torres-Aguilera, J (2023) Does Living near Public Transport Equate to Food (In)Security in the United States?—Evidence from the 2020 National Health Interview Survey (NHIS). In: Sustainability (Switzerland), 15 (18).

Chandra, S and Naik, RT and Venkatesh, M and Mudgal, A (2020) Accessibility evaluations of the proposed road user charge (RUC) program in California. In: Transport Policy . (In Press)

Chandra, Shailesh and Mazin, Ravi and Rahmani, Mehran and Naik, R. Thirumaleswara (2022) Evaluating Locations of Future Intercity Passenger Rail Maintenance. In: 5th International Conference of Transportation Research Group of India, CTRG 2019, 18-21 December 2019, Bhopal, pp. 245-256.

Chandra, Shailesh and Naik, R Thirumaleswara and Galbeno, Luana (2018) Impact assessment of the Internet of Things on feeder transit performance. In: TRANSPORTATION PLANNING AND TECHNOLOGY, 41 (8). pp. 830-844.

Chandra, Shailesh and Naik, R Thirumaleswara and Jimenez, Jose (2019) Crowdsourcing-based traffic simulation for smart freight mobility. In: SIMULATION MODELLING PRACTICE AND THEORY, 95 . pp. 1-15.

Chandra, Shaker and Ghosal, Ashitava (2006) Nonlinear Modeling of Flexible Manipulators Using Nondimensional Variables. In: Journal of Computational and Nonlinear Dynamics, 1 (2). pp. 123-134.

Chandra, TS and Rohatgi, K and Rohatgi, PK (1981) Normative Forecasting on Microbial Research Opportunities for Increasing Food-Production in India. In: Journal of Scientific & Industrial Research, 40 (1). pp. 15-21.

Chandraker, AL and Munjal, ML (1979) Aeroacoustics of a free subsonic jet - directional characteristics. In: Acustica, 43 (4). pp. 233-240.

Chandraker, AL and Munjal, ML (1978) Aerodynamic noise from wave-turbulence interaction. In: Proceedings Mathematical Sciences, 87 (9). pp. 253-263.

Chandraker, AL and Munjal, ML (1978) Directivity and Mach number Dependence of Sound Radiated from Turbulent Jets. In: Indian Journal of Technology, 16 (1). pp. 18-24.

Chandraker, AL and Munjal, ML (1975) Generalized aerodynamic noise equation. In: Physics of Fluids, 18 (2). pp. 264-265.

Chandraker, AL and Munjal, ML (1979) Noise from an axisymmetric shear flow: I numerical results. In: Mechanics Research Communications, 6 (2). pp. 61-68.

Chandraker, AL and Munjal, ML (1979) Noise from an axisymmetric shear flow: II analytical results. In: Mechanics Research Communications, 6 (2). pp. 69-73.

Chandrapa, KG and Muralidhara, MK and Muralidhara, BK and Seshan, S (1989) Physical and thermal properties of sodium silicate-bonded self-setting sands. In: Fonderie-Fondeur d'Aujourd'hui, 83 . pp. 25-34.

Chanekar, Prasad Vilas and Ghosal, Ashitava (2013) Optimal synthesis of adjustable planar four-bar crank-rocker type mechanisms for approximate multi-path generation. In: MECHANISM AND MACHINE THEORY, 69 . pp. 263-277.

Chanu, WC and Gupta, A and Singh, MK and Pandey, OP (2020) Group V Elements (V, Nb and Ta) Doped CeO2 Particles for Efficient Photo-Oxidation of Methylene Blue Dye. In: Journal of Inorganic and Organometallic Polymers and Materials, 31 (2). pp. 636-647.

Charanjeet Kaur, Malhi and Pratap, Rudra and Bhat, Navakanta (2009) MOSFET based MEMS Microphone with Wide Frequency Band. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Chate, A and Dutta, P and Murthy, S (2023) Performance analysis of a thermochemical energy storage system for battery preheating in electric vehicles. In: Applied Thermal Engineering, 219 .

Chate, A and Jain, K and Dash, S and Dutta, P (2024) EFFECT of REACTOR CONFIGURATION on the PERFORMANCE of A CLOSED THERMOCHEMICAL ENERGY STORAGE SYSTEM. In: ASME 2024 Heat Transfer Summer Conference, HT2024 collocated with the ASME 2024 Fluids Engineering Division Summer Meeting and the ASME 2024 18th International Conference on Energy Sustainability, 15 July 2024through 17 July 2024, Anaheim.

Chate, A and Sharma, R and S, SM and Dutta, P (2022) Studies on a potassium carbonate salt hydrate based thermochemical energy storage system. In: Energy, 258 .

Chatterjee, Anindya and Garcia, Mariano (2000) Small slope implies low speed for McGeer's passive walking machines. In: Dynamics and Stability of Systems, 15 (2). pp. 139-157.

Chatterjee, A (2003) Harmonic Balance Based Averaging: Approximate Realizations of an Asymptotic Technique. In: Nonlinear Dynamics, 32 (4). pp. 323-343.

Chatterjee, A and Chahare, NR and Kondaiah, P and Gundiah, N (2021) Role of Fiber Orientations in the Mechanics of Bioinspired Fiber-Reinforced Elastomers. In: Soft Robotics, 8 (6). pp. 640-650.

Chatterjee, A and Cusumano, Joseph P and Chelidze, D (2002) Optimal tracking of parameter drift in a chaotic system: experiment and theory. In: Journal of Sound and Vibration, 250 (5). pp. 877-901.

Chatterjee, A and Kondaiah, P and Gundiah, N (2022) Stress fiber growth and remodeling determines cellular morphomechanics under uniaxial cyclic stretch. In: Biomechanics and Modeling in Mechanobiology .

Chatterjee, A and Pratap, R and Reddy, CK and Ruina, A (2002) Persistent passive hopping and juggling is possible even with plastic collisions. In: The International Journal of Robotics Research, 21 (7). pp. 621-634.

Chatterjee, Anindya (2010) How to write a passable technical paper. [Teaching Resource] (Unpublished)

Chatterjee, Anindya (2005) Mathematics in Engineering. In: Current Science, 88 (3). pp. 405-414.

Chatterjee, Anindya (2005) Statistical origins of fractional derivatives in viscoelasticity. In: Journal of Sound and Vibration, 284 (3-5). pp. 1239-1245.

Chatterjee, Anindya and Cusumano, Joseph P (2002) Asymptotic Parameter Estimation via Implicit Averaging on a Nonlinear Extended System. In: Journal of Dynamic Systems, Measurement, and Control, 125 (1). pp. 11-18.

Chatterjee, Avishek and Govindu, Venu Madhav (2015) Photometric Refinement of Depth Maps for Multi-albedo Objects. In: 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 7-12 June 2015 , pp. 933-941.

Chatterjee, D and Arakeri, VH (1997) Towards the concept of hydrodynamic cavitation control. In: Journal of Fluid Mechanics, 332 . pp. 377-394.

Chatterjee, D and Ghosal, A (2020) Design of a semi-regular Stewart platform manipulator for a desired workspace. In: 14th National Conference on Machines and Mechanisms, NaCoMM 2009, 17-18 December 2009, National Institute of Technology Durgapur; India, pp. 240-246.

Chatterjee, Dhiman (2003) Use of ultrasonics in shear layer cavitation control. In: Ultrasonics, 41 (6). pp. 465-475.

Chatterjee, Dhiman and Arakeri, VH (2004) Some investigations on the use of ultrasonics in travelling bubble cavitation control. In: Journal of Fluid Mechanics, 504 . pp. 365-389.

Chatterjee, R and Patel, A and Kumar, N and Kumar, P (2022) Semi-Analytical Model for High-Speed Rotor Whirl Prediction: An Assumed Modes Formulation for an Axisymmetric Rotor With Non-Uniform Properties. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 - 17 June 2022, Rotterdam.

Chattopadhyay, A and Sampathirao, SR and Hegde, O and Basu, S (2022) Malleable Patterns from the Evaporation of a Colloidal Liquid Bridge: Coffee Ring to the Scallop Shell. In: Langmuir, 38 (18). pp. 5590-5602.

Chattopadhyay, K and Nagarajan, R (2023) Synthesis of Nanocomposites: Synthesis of Nanocomposites by Nonequilibrium Processing. [Book Chapter]

Chaturvedi, R and Trikha, M and Simha, KRY (2020) Impact Penetration through Spacecraft Honeycomb panels Analytical, Numerical and Experimental Study. In: 6th International Conference on Recent Advances in Composite Materials, 25 - 28 February 2019, Varanasi; India, pp. 1050-1058.

Chaturvedi, Rajeev and Trikha, Manish and Simha, KRY (2019) Theoretical and numerical analysis of stepped disk spring. In: THIN-WALLED STRUCTURES, 136 . pp. 162-174.

Chaturvedi, SK and Sekhar, R and Banerjee, S and Kamal, H (2019) Comparative review study of military and civilian unmanned aerial vehicles (UAVs). In: INCAS Bulletin, 11 (3). pp. 181-182.

Chaudhry, V and Kailas, Satish V (2015) Damage mechanisms in stainless steel and chromium carbide coatings under controlled environment fretting conditions. In: WEAR, 334 . pp. 75-81.

Chaudhry, V and Kailas, Satish V (2013) Damage quantification under sliding and seizure condition using first-of-a-kind fretting machine. In: WEAR, 305 (1-2). pp. 140-154.

Chaudhry, V and Kailas, Satish V (2014) Elastic-plastic contact conditions for frictionally constrained bodies under cyclic tangential loading. In: Journal of Tribology - Transactions of the ASME, 136 (1). 011401_1-011401_17.

Chaudhry, V and Kailas, Satish V (2013) Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions. In: WEAR, 301 (1-2, S). pp. 524-539.

Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.

Chaudhuri, S and Basu, S and Kabi, P and Unni, VR and Saha, A (2020) Modeling the role of respiratory droplets in Covid-19 type pandemics. In: Physics of Fluids, 32 (6).

Chaudhuri, S and Basu, S and Saha, A (2020) Analyzing the dominant SARS-CoV-2 transmission routes toward an ab initio disease spread model. In: Physics of Fluids, 32 (12).

Chaudhuri, S and Saha, A and Basu, S (2021) An opinion on the multiscale nature of Covid-19 type disease spread. In: Current Opinion in Colloid and Interface Science, 54 .

Chaudhury, Arkadeep Narayan and Ghosal, Ashitava (2018) Determination of Workspace Volume of Parallel Manipulators Using Monte Carlo Method. In: 7th International Workshop on Computational Kinematics (CK), MAY, 2017, Univ Poitiers, Fundamental & Appl Sci Fac, FRANCE, pp. 323-330.

Chaudhury, Arkadeep Narayan and Ghosal, Ashitava (2017) Optimum design of multi-degree-of-freedom closed-loop mechanisms and parallel manipulators for a prescribed workspace using Monte Carlo method. In: MECHANISM AND MACHINE THEORY, 118 . pp. 115-138.

Chaudhury, Arkadeep Narayan and Ghosal, Ashitava (2019) Workspace of Multi-fingered Robotic Hands Using Monte Carlo Method. In: 18th National and 3rd Int. Conference on Machines & Mechanisms, 13-15 Dec. 2017, Mumbai, pp. 317-327.

Chaudhury, Arkadeep Narayan and Ghosal, Ashitava (2018) Workspace of Multifingered Hands Using Monte Carlo Method. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 10 (4).

Chelliah, Nagaraj and Kailas, Satish V (2009) Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium. In: Wear, 266 (7-8). pp. 704-712.

Chitsaz, Sam and Gundiah, Namrata and Blackshear, Charlie and Tegegn, Nebiyu and Yan, Kimberly S. and Azadani, Ali N. and Hope, Michael and Tseng, Elaine E (2012) Correlation of Calcification on Excised Aortic Valves by Micro-Computed Tomography with Severity of Aortic Stenosis. In: JOURNAL OF HEART VALVE DISEASE, 21 (3). pp. 320-327.

Cholemari, Murali R and Arakeri, Aywant H (2009) Axially homogeneous, zero mean flow buoyancy-driven turbulence in a vertical pipe. In: Journal of Fluid Mechanics, 621 . pp. 69-102.

Cholemari, Murali R and Arakeri, Jaywant H (2009) Axially homogeneous, zero mean flow buoyancy-driven turbulence in a vertical pipe. In: Journal Of Fluid Mechanics, 621 . pp. 69-102.

Cholemari, Murali R and Arakeri, Jaywant H (2005) Experiments and a model of turbulent exchange flow in a vertical pipe. In: International Journal of Heat and Mass Transfer, 48 (21-22). pp. 4467-4473.

Cholemari, Murali R and Arakeri, Jaywant H (2006) Measurements of buoyancy driven turbulence in vertical pipe. In: EUROMECH Fluid Mechanics Conference 6 Royal Institute of Technology, June 26-30 2006, Stockholm.

Cholemari, Murali R and Arakeri, Jaywant H (2005) Waves on radial film flows. In: Physics of fluids, 17 (8). 084108-1.

Cholemari, Murali R and Arakeri, Jaywant H (2006) A model relating Eulerian spatial and temporal velocity correlations. In: Journal of Fluid Mechanics, 551 . pp. 19-29.

Chorey, D and Koegl, M and Boggavarapu, P and Bauer, FJ and Zigan, L and Will, S and Ravikrishna, RV and Deshmukh, D and Mishra, YN (2021) 3D mapping of polycyclic aromatic hydrocarbons, hydroxyl radicals, and soot volume fraction in sooting flames using FRAME technique. In: Applied Physics B: Lasers and Optics, 127 (11).

Choudhury, P and Ghosal, A (2000) Singularity and controllability analysis of parallel manipulators and closed-loop mechanisms. In: Mechanism and Machine Theory, 35 (10). pp. 1455-1479.

Choudhury, S and Joshi, A and Baghel, VS and Ananthasuresh, GK and Asthana, S and Homer-Vanniasinkam, S and Chatterjee, K (2024) Design-encoded dual shape-morphing and shape-memory in 4D printed polymer parts toward cellularized vascular grafts. In: Journal of Materials Chemistry B .

Choueiri, G and Suri, B and Merrin, J and Serbyn, M and Hof, B and Budanur, NB (2022) Crises and chaotic scattering in hydrodynamic pilot-wave experiments. In: Chaos, 32 (9).

Chowdhury, Roy S and Narasimhan, R (1998) Ductile failure in a constrained metal layer under mixed mode loading. In: Acta Materialia, 46 (4). pp. 1103-1113.

Chowdhury, Roy S and Narasimhan, R (1995) Finite element simulations of ductile rupture in a constrained metal foil. In: Materials Science and Engineering A, 191 (1-2). pp. 27-37.

Chowdhury, Roy S and Narasimhan, R (2000) A cohesive finite element formulation for modelling fracture and delamination in solids. In: Sadhana Academy Proceedings in Engineering Sciences, 25 (6). pp. 561-587.

Chowdhury, Roy S and Narasimhan, R (2000) A finite element analysis of stationary crack tip fields in a pressure sensitive constrained ductile layer. In: International Journal of Solids and Structures, 37 (22). pp. 3079-3100.

Christopher, David Santosh and Kanna, Rajesh P and Madhusudhana, GR and Venkumar, P and Mohammed, HA (2012) Numerical Investigation of Heat Transfer from a Two-Dimensional Sudden Expansion Flow Using Nanofluids. In: NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 61 (7). pp. 527-546.

Christopher, David Santosh and Madhusudhana, GR and Venkumar, P and Kanna, Rajesh P and Mohammed, HA (2012) Numerical Investigation on Laminar Flow Due to Sudden Expansion Using Nanofluids. In: JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 9 (12). pp. 2217-2227.

Chua, HT and Toh, HK and Malek, A and Ng, KC and Srinivasan, K (2000) Improved thermodynamic property fields of LiBr-$H_2O$ solution. In: International Journal of Refrigeration, 23 (6). pp. 412-429.

Chua, HT and Toh, HK and Malek, A and Ng, KC and Srinivasan, K (2000) A general thermodynamic framework for understanding the behaviour of absorption chillers. In: International Journal of Refrigeration, 23 (7). 491 -507.

D

Dabiru, Venkata Rambabu and Chatterjee, Anindya (2012) A Linear S-N Curve with Load Dependent Variance and Explicit Failure Probability. In: JOURNAL OF TESTING AND EVALUATION, 40 (4). pp. 557-564.

Dakshina Murthy, HB and Raghavan, MR (1974) real area of contact and compliance of rough cylinders in compression. In: Wear, 27 (1). pp. 47-60.

Dalal, Swapnil and Tomar, Gaurav and Dutta, Pradip (2016) Numerical study of driven flows of shear thinning viscoelastic fluids in rectangular cavities. In: JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 229 . pp. 59-78.

Dangi, Ajay and Deshmukh, Dhananjay and Singh, Robin and Pratap, Rudra (2016) DYNAMICS OF STRONGLY COUPLED FLUID-FILLED MICRO-CAVITIES AND PMUTS IN INTEGRATED MICROFLUIDIC DEVICES. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE), AUG 21-24, 2016, Charlotte, NC.

Dangi, Ajay and Pratap, Rudra (2017) System level modeling and design maps of PMUTs with residual stresses. In: SENSORS AND ACTUATORS A-PHYSICAL, 262 . pp. 18-28.

Das, SL and Chatterjee, A (2002) An alternative stability analysis technique for the simplest walker. In: Nonlinear Dynamics, 28 (3-4). pp. 273-284.

Das, A and Shukla, RK and Govardhan, RN (2022) Contrasting thrust generation mechanics and energetics of flapping foil locomotory states characterized by a unified - Scaling. In: Journal of Fluid Mechanics, 930 .

Das, Anil and Shukla, Ratnesh K and Govardhan, Raghuraman N (2016) Existence of a sharp transition in the peak propulsive efficiency of a low-Re pitching foil. In: JOURNAL OF FLUID MECHANICS, 800 . pp. 307-326.

Das, Anil and Shukla, Ratnesh K and Govardhan, Raghuraman N (2019) Foil locomotion through non-sinusoidal pitching motion. In: JOURNAL OF FLUIDS AND STRUCTURES, 89 (SI). pp. 191-202.

Das, Anil and Shukla, Ratnesh K and Govardhan, Raghuraman N (2022) Universal Scaling Laws for Propulsive Performance of Thrust Producing Foils Undergoing Continuous or Intermittent Pitching. In: Fluids, 7 (4). ISSN 2311-5521

Das, D and Arakeri, JH (2000) Unsteady Laminar Duct Flow With a Given Volume Flow Rate Variation. In: Journal of Applied Mechanics, 67 (2). pp. 274-281.

Das, D and Sreenivas, KR and Arakeri, JH and Srinivasan, J (1993) On The Bifurcation of Laminar Buoyant Jets Discharged Horizontally. In: 3rd World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, OCT 31-NOV 05, 1993, HONOLULU, HI.

Das, Debopam and Arakeri, Jaywant H (1998) Transition of unsteady velocity profiles with reverse flow. In: Journal of Fluid Mechanics, 374 . pp. 251-283.

Das, Kallol and Narasimhan, R (1996) A finite element analysis of plane strain dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 81 (4). pp. 321-341.

Das, P and Dutta, P (2018) Multi phase model of semi solid slurry generation during cooling slope processing of melt treated AL- 7SI-0.3 MG alloy. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 600-603.

Das, P and Dutta, P (2020) Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy. In: Computational Materials Science, 184 .

Das, P and Samanta, SK and Chattopadhyay, H and Sharma, BB and Dutta, P (2013) Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. In: MATERIALS SCIENCE AND TECHNOLOGY, 29 (1). pp. 83-92.

Das, PK and Bhat, GS and Arakeri, VH (1987) Investigations on the propagation of free surface boiling in a vertical superheated liquid column. In: International Journal of Heat and Mass Transfer, 30 (4). pp. 631-638.

Das, Prashant and Govardhan, RN and Arakeri, JH (2013) Effect of hinged leaflets on vortex pair generation. In: Journal of Fluid Mechanics, 730 . pp. 626-658.

Das, Prashant and Govardhan, RN and Arakeri, JH (2018) Unsteady two-dimensional jet with flexible flaps at the channel exit. In: JOURNAL OF FLUID MECHANICS, 845 . pp. 462-498.

Das, Prosenjit and Bhuniya, Bikash and Samanta, Sudip K. and Dutta, Pradip (2019) Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271 . pp. 293-311.

Das, Prosenjit and Dutta, Pradip (2016) Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy. In: COMPUTATIONAL MATERIALS SCIENCE, 125 . pp. 8-19.

Das, Prosenjit and Islam, Sk Tanbir and Samanta, K Sudip and Das, Santanu (2016) Microscale deformation behavior of rheocast Al-7Si-0.3Mg alloy. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 230 (6). pp. 1041-1061.

Das, Prosenjit and Kumar, Manish and Samanta, Sudip K and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. In: MATERIALS AND MANUFACTURING PROCESSES, 29 (4). pp. 422-428.

Das, Prosenjit and Samanta, Sudip K and Bera, Supriya and Dutta, Pradip (2016) Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (5). pp. 2243-2256.

Das, Prosenjit and Samanta, Sudip K and Chattopadhyay, Himadri and Dutta, Pradip (2012) Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. In: ACTA METALLURGICA SINICA-ENGLISH LETTERS, 25 (5). pp. 329-339.

Das, Prosenjit and Samanta, Sudip K and Chattopadhyay, Himadri and Pradip, Dutta (2012) Studies on rheocasting using cooling slope. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites, 8-11 October, 2012, Cape Town, South Africa.

Das, Prosenjit and Samanta, Sudip K and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. In: MEASUREMENT, 55 . pp. 605-615.

Das, Prosenjit and Samanta, Sudip K and Dutta, Pradip (2015) Rheological Behavior of Al-7Si-0.3Mg Alloy at Mushy State. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 46 (3). pp. 1302-1313.

Das, Prosenjit and Samanta, Sudip K and Mondal, Biswanath and Dutta, Pradip (2018) Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 49 (4). pp. 1925-1944.

Das, Prosenjit and Samanta, Sudip K and Tiwari, Shashank and Dutta, Pradip (2015) Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 68 (6). pp. 1215-1220.

Das, Prosenjit and Samanta, Sudip K and Venkatpathi, BRK and Chattopadhyay, Himadri and Dutta, Pradip (2012) Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 669-672.

Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. In: ISIJ INTERNATIONAL, 54 (7). pp. 1601-1610.

Das, Prosenjit and Show, Bijay K and Rathore, Aakash and Samanta, Sudip K (2015) Wear Behavior of Cooling Slope Rheocast A356 Al Alloy. In: TRIBOLOGY TRANSACTIONS, 58 (6). pp. 1054-1066.

Das, SK and Dalal, A and Tomar, G (2021) Electrohydrodynamic-induced interactions between droplets. In: Journal of Fluid Mechanics, 915 .

Das, SL and Chatterjee, A (2003) Multiple Scales via Galerkin Projections:Approximate Asymptotics for Strongly Nonlinear Oscillations. In: Nonlinear Dynamics, 32 (2). pp. 161-186.

Das, SL and Chatterjee, A (2002) Multiple scales without center manifold reductions for delay differential equations near Hopf bifurcations. In: Nonlinear Dynamics, 30 (4). pp. 323-335.

Das, SP and Chakraborty, S and Dutta, P (2002) Natural Convection in a Two-Dimensional Enclosure Heated Symmetrically from Both Sides. In: International Communications in Heat and Mass Transfer, 29 (3). pp. 345-354.

Das, SP and Chakraborty, S and Dutta, P (2004) Studies on Thermal Stratification Phenomenon in $LH_2$ Storage Vessel. In: Heat Transfer Engineering, 25 (4). 54 - 66.

Das, SP and Srinivasan, U and Arakeri, JH (2016) Instabilities in unsteady boundary layers with reverse flow. In: EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 55 (1). pp. 49-62.

Das, SP and Srinivasan, U and Arakeri, JH (2013) Unsteady separation and vortex shedding from a laminar separation bubble over a bluff body. In: Journal of Fluids and Structures, 40 . pp. 233-245.

Das, Sarmistha and Biswas, SK (2004) Boundary Lubricated Tribology of an Aluminum-Silicon Alloy Sliding Against Steel. In: Tribology Letters, 17 (3). pp. 623-628.

Das, Sarmistha and Varalakshmi, K and Jayaram, V. and Biswas, SK (2007) Ultra Mild Wear in Lubricated Tribology of an Aluminium Alloy. In: Journal of Tribology, 129 (4). pp. 942-951.

Dasappa, S and Paul, PJ and Mukunda, HS and Shrinivasa, U (1994) The gasification of wood-char spheres in CO2---N2 mixtures: analysis and experiments. In: Chemical Engineering Science, 49 (2). pp. 223-232.

Dasappa, S and Shrinivasa, U and Baliga, BN and Mukunda, H (1989) Five-kilowatt wood gasifier technology: Evolution and field experience. In: Sadhana, 14 (3). pp. 187-212.

Dasarathy, BV and Srinivasan, P (1969) On the study of a third-order mechanical oscillator. In: Journal of Sound and Vibration, 9 (1). pp. 49-52.

Dasarathy, BV and Srinivasan, P (1968) Study of a class of non-linear systems reducible to equivalent linear systems. In: Journal of Sound and Vibration, 7 (1). pp. 27-30.

Dasarathy, BV and Srinivasan, P (1968) A new approach to the study of non-linear non-autonomous systems. In: Journal of Sound and Vibration, 8 (1). pp. 103-107.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Closed-Form Dynamic Equations of the General Stewart Platform through the Newton–Euler Approach. In: Mechanism and Machine Theory, 33 (7). pp. 993-1012.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Force redundancy in parallel manipulators: Theoretical and practical issues. In: Mechanism and Machine Theory, 33 (06). pp. 727-742.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1998) Singularity-free path planning for the Stewart platform manipulator. In: Mechanism and Machine Theory, 33 (06). pp. 711-725.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1994) Solution to the forward instaneous kinematics for a general 6-dof stewart platform - commen. In: Mechanism and Machine Theory, 29 (2). 341-341 .

Dasgupta, Bhaskar and Mruthyunjaya, TS (2000) The Stewart platform manipulator: a review. In: Mechanism and Machine Theory, 35 (1). pp. 15-40.

Dasgupta, Bhaskar and Mruthyunjaya, TS (1994) A canonical formulation of the direct position kinematics problem for a general 6-6 stewart platform. In: Mechanism and Machine Theory, 29 (6). 819 -827.

Dasgupta, Queeny and Madras, Giridhar and Chatterjee, Kaushik (2017) Controlled Release of Usnic Acid from Biodegradable Polyesters to Inhibit Biofilm Formation. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 3 (3). pp. 291-303.

Dasgupta, Ratul and Tomar, Gaurav (2015) Viscous Undular Hydraulic Jumps of Moderate Reynolds number Flows. In: IUTAM Symposium on Multiphase Flows with Phase Change Challenges and Opportunities, DEC 08-11, 2014, Indian Inst Technol, Hyderabad, INDIA, pp. 300-304.

Dash, A and Garg, P and Dutta, P (2018) Design and analysis of scroll expander using Ns-Ds diagram. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 185-188.

Dash, P and Mallik, T and Verma, N and Choudhury, AR and Ravikrishna, RV and Aditya, K (2024) A DEEP LEARNING BASED MODEL FOR IDENTIFYING RECIRCULATION ZONES FROM EXPERIMENTAL IMAGES OF TRAPPED VORTEX COMBUSTORS. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 24 June 2024 through 28 June 2024, London.

Dash, Susmita and de Ruiter, Jolet and Varanasi, Kripa K (2018) Photothermal trap utilizing solar illumination for ice mitigation. In: SCIENCE ADVANCES, 4 (8).

Dasika, S and Vaghani, D and Shukla, RK (2022) Constrained least-squares based adaptive-order finite-volume WENO scheme for the simulation of viscous compressible flows on unstructured grids. In: Journal of Computational Physics, 470 .

Davanlou, Ashkan and Lee, Joshua and Basu, Saptarshi and Kumar, Ranganathan (2014) THE EFFECTS OF SURFACTANT ON SIMPLEX NOZZLE SPRAY BEHAVIOR AND ITS COMPARISON TO LIQUID FUELS. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2013), NOV 15-21, 2013, San Diego, CA.

Davanlou, Ashkan and Lee, Joshua D. and Basu, Saptarshi and Kumar, Ranganathan (2015) Effect of viscosity and surface tension on breakup and coalescence of bicomponent sprays. In: CHEMICAL ENGINEERING SCIENCE, 131 . pp. 243-255.

David, Jimreeves M and Govardhan, RN and Arakeri, JH (2017) Thrust generation from pitching foils with flexible trailing edge flaps. In: JOURNAL OF FLUID MECHANICS, 828 . pp. 70-103.

David, Jimreeves M and Mathur, Manikandan and Govardhan, RN and Arakeri, JH (2018) The kinematic genesis of vortex formation due to finite rotation of a plate in still fluid. In: JOURNAL OF FLUID MECHANICS, 839 . pp. 489-524.

Dawara, V and Bajantri, A and Dhami, HS and Murty, SVSN and Viswanathan, K (2023) Design of a low-velocity impact framework for evaluating space-grade materials. In: Acta Astronautica, 212 . pp. 606-616.

Dawara, V and Bajantri, A and Dhami, HS and Murty, SVSN and Viswanathan, K (2023) Design of a low-velocity impact framework for evaluating space-grade materials. In: Acta Astronautica, 212 . pp. 606-616.

Dawara, V and Gupta, N and Dey, A and Kumar, A and Viswanathan, K (2022) Pore–microcrack interaction governs failure in bioconsolidated space bricks. In: Ceramics International .

Dawara, V and Viswanathan, K (2024) Onset and propagation of slip at adhesive elastic interfaces. In: Physical Review E, 110 (2).

De, D and Narasimhan, R (1998) Analysis of an interface fracture specimen for adhesively bonded joints. In: International Journal of Fracture, 92 (3). L35-L40.

Deb, A and Gupta, NK and Biswas, U (2005) Simulation-driven design of helmets for head impact protection using an injury-based criterion. In: WIT Transactions on Engineering Sciences (2005) , MAY 08-12, 2005, Florianopolis, BRAZIL.

Deb, Manan and Sen, Dibakar (2014) Design of double toggle switching mechanisms. In: MECHANISM AND MACHINE THEORY, 71 . pp. 163-190.

Deb, Manan and Sen, Dibakar (2013) Parametric study of the behavior of double toggle switching mechanisms. In: MECHANISM AND MACHINE THEORY, 63 . pp. 8-27.

Debnath, Nandini and Hassanpourfar, Mahtab and Ghos, Ranajay and Trived, Japan and Thunda, Thomas and Sadrzadeh, Mohtada and Kumar, Aloke (2017) Abiotic streamers in a microfluidic system. In: SOFT MATTER, 13 (46). pp. 8698-8705.

Debnath, Nandini and Kumar, Aloke and Thundat, Thomas and Sadrzadeh, Mohtada (2019) Investigating fouling at the pore-scale using a microfluidic membrane mimic filtration system. In: SCIENTIFIC REPORTS, 9 .

Deepak, Sangamesh R (2009) A Global Constraint On Relative Rotation To Avoid Lumped Compliant Mechanisms In Topology Optimization. In: 32nd Annual Mechanisms and Robotics Conference, AUG 03-06, 2008, New York, pp. 227-235.

Deepak, SR and Ananthasuresh, GK (2009) Static Balancing of Spring-loaded Planar Revolute-joint Linkages without Auxiliary Links. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Deepak, Sangamesh R and Ananthasuresh, GK (2012) Perfect Static Balance of Linkages by Addition of Springs But Not Auxiliary Bodies. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 4 (2).

Deepak, Sangamesh R and Ananthasuresh, GK (2012) Static balancing of a four-bar linkage and its cognates. In: Mechanism and Machine Theory, 48 (1). pp. 62-80.

Deepak, Sangamesh R and Dinesh, M and Ananthasuresh, GK (2008) A Comparative Study of the Formulations for Topology Optimization of Compliant Mechanisms. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA., Aug. 3-6, 2008, New York City, NY.

Deepak, Sangamesh R and Ghosal, Ashitava (2008) Special Coordinates Associated With Recursive Forward Dynamics Algorithm for Open Loop Rigid Multibody Systems. In: Jouranl of Applied Mechanics- Transactions of the ASME, 75 (5). 051003-1-051003-11.

Deepak, Sangamesh R and Hansoge, Amrith N and Ananthasuresh, GK (2016) Application of Rigid-Body-Linkage Static Balancing Techniques to Reduce Actuation Effort in Compliant Mechanisms. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 8 (2).

Deepu, P and Anand, Prateek and Basu, Saptarshi (2015) Stability of Poiseuille flow in a fluid overlying an anisotropic and inhomogeneous porous layer. In: PHYSICAL REVIEW E, 92 (2).

Deepu, P and Basu, Saptarshi (2014) Effect of evaporation and agglomeration on droplet shape oscillations. In: CHEMICAL ENGINEERING SCIENCE, 119 . pp. 212-217.

Deepu, P and Basu, Saptarshi (2014) Spectral response of a droplet in pulsating external flow field. In: PHYSICS OF FLUIDS, 26 (2).

Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2013) Dynamics and fracture of ligaments from a droplet on a vibrating surface. In: Physics of Fluids, 25 (8). 082106_1-082106_19.

Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2013) Vaporization dynamics of functional droplets in a hot laminar air jet. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 56 (1-2). pp. 69-79.

Deepu, P and Basu, Saptarshi and Saha, Abhishek and Kumar, Ranganathan (2012) Spreading and atomization of droplets on a vibrating surface in a standing pressure field. In: Applied Physics Letters, 101 (14). pp. 143108-1.

Deepu, P and Chowdhuri, Shubham and Basu, Saptarshi (2014) Oscillation dynamics of sessile droplets subjected to substrate vibration. In: CHEMICAL ENGINEERING SCIENCE, 118 . pp. 9-19.

Deepu, P and Dawande, Sameer and Basu, Saptarshi (2015) Instabilities in a fluid overlying an inclined anisotropic and inhomogeneous porous layer. In: JOURNAL OF FLUID MECHANICS, 762 .

Deepu, P and Kallurkar, Srinivas and Anand, Prateek and Basu, Saptarshi (2016) Stability of a liquid film flowing down an inclined anisotropic and inhomogeneous porous layer: an analytical description. In: JOURNAL OF FLUID MECHANICS, 807 . pp. 135-154.

Deepu, P and Saha, Abhishek and Kumar, Ranganathan and Basu, Saptarshi (2012) Shape deformation and atomization of functional droplets in contact with a vibrating surface. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg.

Deka, M and Tomar, G and Kumaran, V (2023) Linear stability analysis of compressible pipe flow. In: Theoretical and Computational Fluid Dynamics .

Deka, N and Dash, S (2023) Multistage interfacial thermal desalination system with metallic evaporators. In: Desalination, 556 .

Deka, N and Qari, MM and Dash, S (2025) Siphon-based scalable and salt-resistant multistage thermal desalination system. In: Desalination, 593 .

Deka, N and Saha, S and Dash, S (2022) Evaporation-induced convective transport in confined saline droplets. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 639 .

Deora, Tanvi and Gundiah, Namrata and Sane, Sanjay P (2017) Mechanics of the thorax in flies. In: JOURNAL OF EXPERIMENTAL BIOLOGY, 220 (8). pp. 1382-1395.

Desai, A and Mogra, M and Sridhara, S and Kumar, K and Sesha, G and Ananthasuresh, GK (2020) Topological-derivative-based design of stiff fiber-reinforced structures with optimally oriented continuous fibers. In: Structural and Multidisciplinary Optimization . (In Press)

Deshmukh, D and Mohan, Madan A and Anand, TNC and Ravikrishna, RV (2012) Spray characterization of straight vegetable oils at high injection pressures. In: Fuel, 97 . pp. 879-883.

Deshmukh, D and Ravikrishna, RV (2011) Experimental Studies on High-Pressure Spray Structure of Biofuels. In: Atomization and Sprays, 21 (6). pp. 467-481.

Deshmukh, D and Ravikrishna, RV (2014) Studies on microscopic structure of diesel sprays under atmospheric and high gas pressures. In: INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS, 6 (2). pp. 199-219.

Deshmukh, D and Ravikrishna, RV (2013) A method for measurement of planar liquid volume fraction in dense sprays. In: Experimental Thermal and Fluid Science, 46 . pp. 254-258.

Deshmukh, Harish and Maiya, MP and Murthy, Srinivasa S (2015) Continuous vapour adsorption cooling system with three adsorber beds. In: APPLIED THERMAL ENGINEERING, 82 . pp. 380-389.

Devanapalli, RS and Devi, VS (2018) Transfer learning using progressive neural networks and NMT for classification tasks in NLP. In: 25th International Conference on Neural Information Processing, ICONIP 2018, 13 - 16 December 2018, Siem Reap, pp. 188-197.

Devaprakasam, D and Biswas, SK (2003) Design of a flexure for surface forces apparatus. In: Review of Scientific Instruments, 74 (3). pp. 1228-1233.

Devaprakasam, D and Biswas, SK (2005) Measurement of stiffness and damping constant of self-assembled monolayers. In: Review of Scientific Instruments, 76 (3). 035102-1-035102-7.

Devaprakasam, D and Biswas, SK (2005) Molecular damping: Mechanical response of self-assembled monomolecular layer to compression. In: Physical Review B, 72 (12).

Devaprakasam, D and Khatri, OP and Shankar, N and Biswas, SK (2005) Boundary lubrication additives for aluminium: A journey from nano to macrotribology. In: Tribology International, 38 (11-12). pp. 1022-1034.

Devaprakasam, D and Sampath, S and Biswas, SK (2004) Thermal Stability of Perfluoroalkyl Silane Self-Assembled on a Polycrystalline Aluminum Surface. In: Langmuir, 20 (4). pp. 1329-1334.

Devaraju, A and Elayaperumal, A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders. In: SURFACE & COATINGS TECHNOLOGY, 207 . pp. 406-412.

Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.

Devaraju, Ayyannan and Elayaperumal, Ayyasamy and Venugopal, Srinivasan and Kailas, Satish V and Alphonsa, Joseph (2011) Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 degrees C. In: Strojniski Vestnik / Journal of Mechanical Engineering, 57 (12). pp. 927-935.

Devi, Lavanya AL and Nongthomba, Upendra and Bobji, MS (2016) Quantitative characterization of adhesion and stiffness of corneal lens of Drosophila melanogaster using atomic force microscopy. In: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 53 . pp. 161-173.

Dewan, Anupam and Arakeri, Jaywant H and Srinivasan, J (1997) A new turbulence model for the axisymmetric plume. In: Applied Mathematical Modelling, 21 (11). pp. 709-719.

Dewan, Anupam and Arakeri, Jaywant H and Srinivasan, J (1992) A note on high Schmidt number laminar bouyant jets discharged horizontally. In: International Communications in Heat and Mass Transfer, 19 (5). pp. 721-731.

Dey, J (1987) A note on the series solutions of momentum and energy equations for heat transfer from a semi-infinite plate. In: International Journal of Heat and Mass Transfer, 30 (11). pp. 2444-2445.

Dey, J (1989) A simple technique for approximate solutions of the Falkner-Skan equation. In: Acta Mechanica, 77 (3-4). pp. 299-305.

Dey, J and Das, D (1998) A note on the linear instability of the Blasius flow. In: Acta Mechanica, 128 (3-4). pp. 253-258.

Dey, J and Nath, G (1984) Forced convection heat transfer from a flat plate with an unheated starting length. In: International Journal of Heat and Mass Transfer, 27 (12). pp. 2429-2431.

Dey, J and Nath, G (1982) Forced convection heat transfer over a semi-infinite plate. In: International Journal of Heat and Mass Transfer, 25 (11). pp. 1774-1776.

Dey, J and Nath, G (1981) Mixed Convection Flow On Vertical Surface. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 15 (4). pp. 279-283.

Dhami, HS and Panda, PR and Mohanty, DP and Udupa, A and Mann, JB and Viswanathan, K and Chandrasekar, S (2021) Unified Analysis of Temperature Fields Arising from Large Strain Deformation and Friction in Manufacturing Processes. In: 150th Annual Meeting and Exhibition of The Minerals, Metals and Materials Society, TMS 2021, 15-18 Mar 2021, Pittsburgh, pp. 921-931.

Dhami, HS and Panda, PR and Mohanty, DP and Viswanathan, K (2022) An Analytical Method for Predicting Temperature Rise Due to Multi-body Thermal Interaction in Deformation Processing. In: JOM .

Dhami, HS and Panda, PR and Saikiran, P and Viswanathan, K (2022) Metal powders via surface grinding: Applicability and performance evaluation for laser sintering. In: ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022, 27 - 1 July 2022, West Lafayette.

Dhami, HS and Panda, PR and Viswanathan, K (2022) Production of powders for metal additive manufacturing applications using surface grinding. In: Manufacturing Letters, 32 . pp. 54-58.

Dhami, HS and Viswanathan, K (2024) Investigating particle morphology, quality, flowability and performance of abrasive-grinding based powders for directed energy deposition. In: Powder Technology, 437 .

Dhami, HS and Viswanathan, K (2020) On the formation of spherical particles in surface grinding. In: ASME 2020 15th International Manufacturing Science and Engineering Conference, MSEC 2020, 3 Sept 2020.

Dhar, Eshan and Srivatsa, Shreyas and Kumar, Pramod (2016) FEASIBILITY OF A DIRECT COUPLED TURBINE-COMPRESSOR POWER BLOCK FOR S-CO2 BRAYTON CYCLES. In: ASME Turbo Expo: Turbine Technical Conference and Exposition, JUN 13-17, 2016, Seoul, SOUTH KOREA, pp. 393-402.

Dharuman, C and Arakeri, JH and Srinivasan, Kandadai (2006) Performance evaluation of an integrated solar water heater as an option for building energy conservation. In: Energy and Buildings, 38 (3). pp. 214-219.

Dheeman, Basu and Ashitava, Ghosal (1997) Singularity Analysis of Platform-type Multi-loop Spatial Mechanisms. In: Mechanism and Machine Theory, 32 (3). pp. 375-389.

Dias, Sandra and Murali, Banavoth and Krupanidhi, SB (2015) Solution processible Cu2SnS3 thin films for cost effective photovoltaics: Characterization. In: MATERIALS CHEMISTRY AND PHYSICS, 167 . pp. 309-314.

Dibakar, Sen and Mruthyunjaya, TS (1999) Synthesis of workspaces of planar manipulators with arbitrary topology using shape representation and simulated annealing. In: Mechanism and Machine Theory, 34 (3). pp. 391-420.

Dibakar, Sen and Mruthyunjaya, TS (1999) A computational geometry approach for determination of boundary of workspaces of planar manipulators with arbitrary topology. In: Mechanism and Machine Theory, 34 (1). pp. 149-169.

Dibakar, Sen and TS, Mruthyunjaya (1996) The question of minimax loop-size in planar homogeneous kinematic chains. In: Mechanism and Machine Theory, 31 (6). 821-829 .

Dighe, Anasuya and Chandra, Nagasuma and Vishveshwara, Saraswathi and Ananthasuresh, GK (2015) Dissecting Ligand Binding Sites : A Layer at a Time. In: BIOPHYSICAL JOURNAL, 108 (2, 1). 216A.

Diksangi, SS and Kulkarni, S and Edachery, V and Pariyar, AK and Kumar, S (2020) Effect of friction stir processing on the dry sliding wear behavior of AZ31 Mg alloy. In: 2nd International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering, ERCAM 2019, 25-26 July 2019., Bangalore.

Dikshit, R and Dey, A and Gupta, N and Varma, SC and Venugopal, I and Viswanathan, K and Kumar, A (2020) Space bricks: From LSS to machinable structures via MICP. In: Ceramics International .

Dikshit, R and Dey, A and Kumar, A (2022) Sporosarcina pasteurii can Efficiently Precipitate Calcium Carbonate at High Salt Concentration. In: Geomicrobiology Journal, 39 (2). pp. 123-134.

Dikshit, R and Gupta, N and Dey, A and Viswanathan, K and Kumar, A (2022) Microbial induced calcite precipitation can consolidate martian and lunar regolith simulants. In: PLoS ONE, 17 (4).

Dikshit, R and Gupta, N and Kumar, A (2023) Microbial Endeavours Towards Extra-terrestrial Settlements. In: Journal of the Indian Institute of Science .

Dikshit, R and Jain, A and Dey, A and Kumar, A (2020) Microbially induced calcite precipitation using Bacillus velezensis with guar gum. In: PLoS ONE, 15 (8 Augu).

Dilip, D and Bobji, MS and Govardhan, Raghuraman N (2015) Effect of absolute pressure on flow through a textured hydrophobic microchannel. In: MICROFLUIDICS AND NANOFLUIDICS, 19 (6). pp. 1409-1427.

Dilip, D and Jha, Narsing K and Govardhan, Raghuraman N and Bobji, MS (2014) Controlling air solubility to maintain `'Cassie'' state for sustained drag reduction. In: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 459 . pp. 217-224.

Dilip, D and Kumar, Vijay S and Bobji, MS and Govardhan, Raghuraman N (2018) Sustained drag reduction and thermo-hydraulic performance enhancement in textured hydrophobic microchannels. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 119 . pp. 551-563.

Dillip, GR and Kiran, GK and Bharti, A and Bhagwat, TM and Gautam, GS and Bhattacharyya, AJ (2022) Defective Nanoporous Zinc Cobaltite as a Potential Bifunctional Oxygen Electrocatalyst. In: ACS Applied Energy Materials .

Dimri, J and Gurumoorthy, B (2005) Handling sectional views in volume-based approach to automatically construct 3D solid from 2D views. In: International Conference on Geometric Modeling and Processing, APR 13-15, 2004, Beijing.

Dimri, Jitendra and Gurumoorthy, B (2004) Handling Sectional Views in Volume-based Approach to Automatically Construct 3D Solid from 2D Views. In: Geometric Modeling and Processing, 2004, 13-15 April 2004, Beijing, China, pp. 267-278.

Dinesh, M and Ananthasuresh, GK (2008) Displacement Amplifying Compliant Mechanisms for Two-axis High-resolution Monolithic Inertial Sensors. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA, Aug. 3-6, 2008, New York City, NY.

Dinesh, M and Ananthasuresh, GK (2007) Shape Memory Alloy Actuation for a Novel Spring-Steel Compliant XY Stage. In: 2nd National ISSS Conference on MEMS, Microsensors, Smart Materials, Structures, and Systems, , Nov. 16-17, 2007, Pilani, India.

Dinesh, M and Ananthasuresh , GK (2010) Micro-mechanical stages with enhanced range. In: Springer, 2 (1-2). pp. 35-43.

Dixit, Saurabh and Kashyap, Sanjay and Kailas, Satish V and Chattopadhyay, K (2018) Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 767 . pp. 1072-1082.

Dixit, Saurabh and Madhu, H C and Kailas, S V and Chattopadhyay, K (2017) Role of insert material on process loads during FSW. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 91 (9-12). pp. 3427-3435.

Dixit, Saurabh and Mahata, Avik and Mahapatra, D Roy and Kailas, Satish V and Chattopadhyaya, K (2018) Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying. In: COMPOSITES PART B-ENGINEERING, 136 . pp. 63-71.

Dolai, A and Badhuk, P and Ravikrishna, RV (2023) Investigation of syngas combustion in a novel ultra-low emission 20-kW two-stage combustor. In: Fuel, 340 .

Dolai, A and Pramanik, S and Badhuk, P and RV, R (2022) Nonlinear Dynamic Analysis of the Transition from MILD Regime to Thermoacoustic Instability in a Reverse Flow Combustor. In: Combustion Science and Technology .

Dolai, A and Ravikrishna, RV (2023) Assessment of MILD combustion in co/counter-swirl configuration using syngas as a fuel. In: International Journal of Hydrogen Energy, 49 .

Dolai, A and Ravikrishna, RV (2025) Influence of momentum ratio on heat release rate and noise of co/counter-swirl non-premixed diluted CO/H2 flames. In: Experimental Thermal and Fluid Science, 161 .

Dolai, A and Ravikrishna, RV (2024) Understanding the heat release fluctuations and combustion noise characteristics of non-premixed co/counter-swirl syngas flames at MILD conditions. In: Fuel, 378 .

Don Bosco, FS and Kamble, S and Lakshminarasimha, S and Gupta, GS (2023) Cold-model numerical study of raceway shape and size effect on gas and fines flow behaviour in packed bed between the raceway and cohesive zone. In: Ironmaking and Steelmaking .

Dubey, S and Awasthi, S and Nisar, A and Balani, K (2020) Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB2-ZrB2 Ceramics. In: JOM, 72 (6). pp. 2207-2218.

Duggirala, V and Hegde, VN and Reddy, V and Kumar, P (2024) MODELING OF METAL MATRIX CONCENTRATED SOLAR RECEIVERS FOR SCO2 POWER BLOCKS. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 24 June 2024 through 28 June 2024, London.

Dulhani, Jay P and Sarkar, Sandip and Dalai, Amaresh (2014) Effect of angle of incidence on mixed convective wake dynamics and heat transfer past a square cylinder in cross flow at Re=100. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 74 . pp. 319-332.

Dutta, A and Gupta, A and Sathish, S and Bandooni, A and Kumar, P (2019) Simple recuperated S-CO2 cycle revisited: Optimization of operating parameters for maximum cycle efficiency. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.

Dutta, P (2014) Heat transfer challenges in novel power cycles for concentrating solar power. In: Proceedings of the 15th International Heat Transfer Conference, IHTC 2014 .

Dutta, P (2006) Modelling of Transport Phenomena in Dissimilar Welding of Aluminium Alloys. In: 8th International Seminar Numerical Analyses of Weldability, 25-27 Sep 2006, Seggau Graz Austria.

Dutta, P (2006) Transport Phenomena in Laser Surface Alloying. In: Invited Keynote Lecture, Seminar on Application of Laser in Materials Processing, Feb 2-3 2006, Jadavpur University, Kolkata.

Dutta, P and Kumar, A (2009) Influence of Solid Phase Movement and Melt Convection on Macrosegregation and Microstructure Formation. In: 4th International Conference on Solidification Science and Processing , November 20-23, 2009.

Dutta, P and Murthy, KSS (2009) Semisolid Manufacturing. In: 57th Indian Foundry Congress, Feb. 13-15, 2009, Kolkata.

Dutta, P and Murthy, KSS and Kumar, P (2007) Squeeze Casting and Semi-solid Forming: New Developments. In: International Conference on Aluminium (INCAL), , Nov. 21-23, 2007, Hyderabad.

Dutta, Pradip (2017) High temperature solar receiver and thermal storage systems Pradip Dutta. In: APPLIED THERMAL ENGINEERING, 124 . pp. 624-632.

Dutta, Pradip and Kumar, Pramod (2017) Supercritical Carbon Dioxide-Based Power Cycles. [Book Chapter]

Dutta, S and Agrawal, M and Jog, CS (2022) A monolithic, ALE finite-element-based strategy for partially submerged solids in an incompressible fluid flow using the mortar method. In: Journal of Fluids and Structures, 115 .

Dutta, S and Jog, CS (2024) Analytical solutions for thermoelastic stress-focusing in cylindrical and spherical solids. In: International Journal of Engineering Science, 205 .

Dutta, S and Jog, CS (2024) Monolithic finite element modeling of compressible fluid-structure-electrostatics interactions in MEMS devices. In: International Journal for Numerical Methods in Fluids .

Dutta, S and Jog, CS (2021) A monolithic arbitrary Lagrangian�Eulerian-based finite element strategy for fluid�structure interaction problems involving a compressible fluid. In: International Journal for Numerical Methods in Engineering .

Dutta, S and Jog, CS (2023) A monolithic, finite element-based strategy for solving fluid structure interaction problems coupled with electrostatics. In: Computers and Fluids, 264 .

Dutta, S and Singh, MK and Bobji, MS (2018) Probing atomic level interactions in Ni nanorods and AFM cantilever using atomic force microscopy based F–D spectroscopy. In: 9th International Scientific Conference, BALTTRIB 2017, 16 - 17 November 2017, Kaunas, pp. 194-198.

Dutta, S and Vikram, GNVR and Bobji, MS and Mohan, S (2020) Table top experimental setup for electrical contact resistance measurement during indentation. In: Measurement: Journal of the International Measurement Confederation, 152 .

Dutta, T and Chauniyal, A and Singh, I and Narasimhan, R (2020) Numerical investigation of tensile response of notched bulk metallic glass composite specimens. In: Modelling and Simulation in Materials Science and Engineering, 28 (8).

Dutta, T and Narasimhan, R (2020) Numerical study of stationary cracks in bulk metallic glass composites under Mode I, small scale yielding conditions. In: Engineering Fracture Mechanics, 239 .

Dutta, Tanmay and Chauniyal, Ashish and Singh, I and Narasimhan, R and Thamburaja, P and Ramamurty, U (2018) Plastic deformation and failure mechanisms in nano-scale notched metallic glass specimens under tensile loading. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 111 . pp. 393-413.

Dwarakanath, TA and Dasgupta, Bhaskar and Mruthyunjaya, TS (2001) Design and development of a Stewart platform based force– torque sensor. In: Mechatronics, 11 (7). pp. 793-809.

Dwarakanath, TA and Ghosal, A and Shrinivasa, U (1994) Kinematic analysis and design of articulated manipulators with joint motion constraints. In: Journal of Mechanical Design, 116 (3). pp. 969-972.

E

Easwaran, V and Gupta, VH and Munjal, ML (1993) Relationship Between The Impedance Matrix And The Transfer Matrix With Specific Reference To Symmetrical, Reciprocal And Conservative Systems. In: Journal of Sound and Vibration, 161 (3). pp. 515-525.

Easwaran, V and Gupta, VH and Munjal, ML (1994) The relationship between reciprocal and symmetrical systems - reply. In: Journal of Sound and Vibration, 170 (4). pp. 568-570.

Easwaran, V and Munjal, ML (1993) Analysis of reflection characteristics of a normal incidence plane wave on resonant sound absorbers: A finite element approach. In: Journal of the Acoustical Society of America, 93 (3). pp. 1308-1318.

Easwaran, V and Munjal, ML (1993) Finite element analysis of wedges used in anechoic chambers. In: Journal of Sound and Vibration, 160 (2). pp. 333-350.

Easwaran, V and Munjal, ML (1992) Plane wave analysis of conical and exponential pipes with incompressible mean flow. In: Journal of Sound and Vibration, 152 (1). pp. 73-93.

Easwaran, V and Munjal, ML (1991) Transfer matrix modeling of hyperbolic and parabolic ducts with incompressible mean flow. In: Journal of the Acoustical Society of America, 90 (4).

Easwaran, V and Munjal, ML (1995) A note on the effect of wall compliance on lowest?order mode propagation in fluid?filled/submerged impedance tubes. In: Journal of the Acoustical Society of America, 97 (6). pp. 3494-3501.

Edachery, V and John, A and Rajendran, A and Srinivasappa, V and Mathiyalagan, S and Kumar, S and Kailas, SV (2021) Enhancing tribological properties of Inconel X-750 superalloy through surface topography modification by shot blasting. In: Materials Performance and Characterization, 10 (2).

Edachery, V and Pariyar, A and Muthukumar, M and Harsha, S and Likhitha, CS and Kailas, SV (2021) A Study on the Tribological Behavior of Al/B4C/Graphite Hybrid Composite Fabricated by Friction Stir Processing. [Book Chapter]

Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Kailas, SV and Suvin, PS (2022) Wetting behaviour of a Green cutting fluid (GCF); influence of surface roughness and surface energy of AA5052, Ti6Al4V and EN31. In: Materials Today: Proceedings .

Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Suvin, PS and Kailas, SV (2023) Effect of Surface Topography and Roughness on the Wetting Characteristics of an Indigenously Developed Green Cutting Fluid (GCF). [Book Chapter]

Edachery, V and Shashank, R and Kailas, SV (2021) Influence of surface texture directionality and roughness on wettability, sliding angle, contact angle hysteresis, and lubricant entrapment capability. In: Tribology International, 158 .

Edachery, V and Swamybabu, V and Adarsh, D and Kailas, SV (2022) Influence of surface roughness frequencies and roughness parameters on lubricant wettability transitions in micro-nano scale hierarchical surfaces. In: Tribology International, 165 .

Edachery, V and Swamybabu, V and Gurupatham, A and Paramasamy, M and Kailas, SV (2022) The role of surface topography and normal load in the initiation of ratchetting-peak friction, seizure, scuffing, and elastic shakedown. In: Journal of Tribology, 144 (2).

F

Fava, M and Protik, NH and Li, C and Ravichandran, NK and Carrete, J and van Roekeghem, A and Madsen, GKH and Mingo, N and Broido, D (2021) How dopants limit the ultrahigh thermal conductivity of boron arsenide: a first principles study. In: npj Computational Materials, 7 (1).

Fenil, A and Giri, G and Seshadri, L and Kumar, P and Nasser, A (2023) NUMERICAL ANALYSIS OF A SHROUDED CENTRIFUGAL COMPRESSOR FOR USE IN SUPERCRITICAL CARBONDIOXIDE (S-CO2) BRAYTON CYCLE. In: UNSPECIFIED.

Freund, Jonathan and Tiwari, Arpit and Shukla, Ratnesh and Pantano, Carlos (2011) Interface capturing simulations of acoustically driven bubble dynamics in and near tissue. In: 161st Meeting of the Acoustical Society of America, 2011.

G

Gadag, SP and Srinivasan, MN (1995) Cavitation erosion of laser-melted ductile iron. In: Journal of Materials Processing Technology, 51 (1-4). pp. 150-163.

Gadag, SP and Srinivasan, MN (1994) Dry sliding wear and friction: laser-treated ductile iron. In: Wear, 173 (1-2). pp. 21-29.

Gadag, SP and Srinivasan, MN (1996) Surface properties of laser processed ductile iron. In: Applied Physics A:Materials Science and Processing, 63 (4). pp. 409-414.

Gadag, SP and Srinivasan, MN and Mordike, BL (1995) Effect of laser processing parameters on the structure of ductile iron. In: Materials Science and Engineering A, 196 (1-2). pp. 145-154.

Gajrani, Kishor Kumar and Suvin, PS and Kailas, Satish Vasu and Sankar, Mamilla Ravi (2019) Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 266 . pp. 125-139.

Gandreti, SB and Sastry, PS (2023) Efficient Depth-First Search Approach for Mining Injective General Episodes. In: 6th ACM India Joint International Conference on Data Science and Management of Data, CODS-COMAD 2023, 4 January - 7 January 2023, Mumbai, pp. 1-9.

Ganguly, Suvankar and Sarkar, Sandip and Hota, Tapan Kumar and Mishra, Manoranjan (2015) Thermally developing combined electroosmotic and pressure-driven flow of nanofluids in a microchannel under the effect of magnetic field. In: CHEMICAL ENGINEERING SCIENCE, 126 . pp. 10-21.

Gannena, KSR and Rao, DCK and Roy, D and Kumar, A and Basu, S (2022) Bubble dynamics and atomization in evaporating polymeric droplets. In: Journal of Fluid Mechanics, 951 .

Gaonkar, C D and Rao, D R and Kumar, K M and Munjal, M L (2020) End corrections for double-tuning of the same-end inlet-outlet muffler. In: APPLIED ACOUSTICS, 159 .

Gaonkar, CD and Munjal, ML (2018) Theory of the double-tuned side-inlet side-outlet muffler. In: NOISE CONTROL ENGINEERING JOURNAL, 66 (6). pp. 489-495.

Garg, Manish and Ravikrishna, RV (2014) Effect of port gas injection on in-cylinder stratification in a CNG fuelled SI engine. In: PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 14 (4). pp. 244-258.

Garg, Manish and Ravikrishna, RV (2019) In-cylinder flow and combustion modeling of a CNG-fuelled stratified charge engine. In: APPLIED THERMAL ENGINEERING, 149 . pp. 425-438.

Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.

Garg, Pardeep and Karthik, G M and Kumar, Prashant and Kumar, Pramod (2016) Development of a generic tool to design scroll expanders for ORC applications. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 878-888.

Garg, Pardeep and Krishna, Sriram Hebbalguppe and Kumar, Pramod and Conboy, Thomas and Ho, Clifford (2014) ADVANCED LOW PRESSURE CYCLE FOR CONCENTRATED SOLAR POWER GENERATION. In: ASME 8th International Conference on Energy Sustainability, JUN 30-JUL 02, 2014, Seaport World Trade Ctr, Boston, MA.

Garg, Pardeep and Kumar, Pramod and Dutta, Pradip and Conboy, Thomas and Ho, Clifford (2014) DESIGN OF AN EXPERIMENTAL TEST FACILITY FOR SUPERCRITICAL CO2 BRAYTON CYCLE. In: ASME 8th International Conference on Energy Sustainability, JUN 30-JUL 02, 2014, Seaport World Trade Ctr, Boston, MA.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai (2013) Supercritical carbon dioxide Brayton cycle for concentrated solar power. In: Journal of Supercritical Fluids, 76 . pp. 54-60.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai (2015) A trade-off between maxima in efficiency and specific work output of super- and trans-critical CO2 Brayton cycles. In: JOURNAL OF SUPERCRITICAL FLUIDS, 98 . pp. 119-126.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2014) ELEVATION OF HEAT REJECTION TEMPERATURE IN TRANSCRITICAL CONDENSING CYCLES USING CO2+PROPANE MIXTURES. In: ASME Turbo Expo: Turbine Technical Conference and Exposition, JUN 16-20, 2014, Dusseldorf, GERMANY.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of carbon dioxide blends with isopentane and propane as working fluids for organic Rankine cycles. In: Applied Thermal Engineering, 52 (2). pp. 439-448.

Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of isopentane, R-245fa and their mixtures as working fluids for organic Rankine cycles. In: APPLIED THERMAL ENGINEERING, 51 (1-2). pp. 292-300.

Garg, Pardeep and Orosz, Matthew S and Kumar, Pramod (2016) Thermo-economic evaluation of ORCs for various working fluids. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 841-853.

Garg, R and Dhami, HS and Panda, PR and Viswanathan, K (2022) Directed energy deposition using non-spherical metal powders-. In: ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022, 27 - 1 July 2022, West Lafayette.

Garg, R and Mujumdar, S and Agrawal, A (2021) Pumping Power Performance and Frictional Resistance of Textured Microchannels in Gaseous Slip Flows. In: Industrial and Engineering Chemistry Research .

Gautam Kumar , R and Ananthasuresh, GK (2013) A Study of Mechanical Advantage in Compliant Mechanisms. In: Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms (iNacoMM 2013), December 18-20, 2013, IIT Roorkee, India.

Gavara, Madhusudhana (2012) Asymmetric forced convection of nanofluids in a channel with symmetrically mounted rib heaters on opposite walls. In: Numerical Heat Transfer, Part A: Applications, 62 (11). pp. 884-904.

Gavara, Madhusudhana (2012) Natural Convection in a Vertical Channel with Arrays of Flush-Mounted Heaters on Opposite Conductive Walls. In: NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 62 (2). pp. 111-135.

Gavara, Madhusudhana (2012) Natural convection in a series of thermally interacting cavities with wall mounted heaters. In: Numerical Heat Transfer, Part A, 62 (11). pp. 861-883.

Gavara, Madhusudhana and Kanna, Parthasarathy Rajesh (2014) Three-Dimensional Study of Natural Convection in a Horizontal Channel With Discrete Heaters on One of Its Vertical Walls. In: HEAT TRANSFER ENGINEERING, 35 (14-15,). pp. 1235-1245.

Gavara, Madhusudhana and Kanna, Rajesh P (2012) Study of conjugate natural convection between vertical coaxial rectangular cylinders. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39 (7). pp. 904-912.

Gavara, Madhusudhana R and Dutta, Pradip and Seetharamu, KN (2012) Mixed convection adjacent to non-isothermal vertical surfaces. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (17-18). pp. 4580-4587.

Gelli, Vikram NVR and Bobji, MS and Mohan, S (2014) Effect of contact stresses on shape recovery of NiTiCu thin films. In: THIN SOLID FILMS, 564 . pp. 306-313.

Ghara, Mahua and Kundanati, Lakshminath and Borges, Renee M (2011) Nature's Swiss Army Knives: Ovipositor Structure Mirrors Ecology in a Multitrophic Fig Wasp Community. In: PLos One, 6 (8).

Ghatage, D and Tomar, G and Shukla, RK (2020) Thermostat-induced spurious interfacial resistance in non-equilibrium molecular dynamics simulations of solid-liquid and solid-solid systems. In: Journal of Chemical Physics, 153 (16).

Ghatage, Dhairyashil and Tomar, Gaurav and Shukla, Ratnesh K (2015) Soft-spring wall based non-periodic boundary conditions for non-equilibrium molecular dynamics of dense fluids. In: JOURNAL OF CHEMICAL PHYSICS, 142 (12).

Ghorai, S and Panda, MK (2013) Bioconvection in an anisotropic scattering suspension of phototactic algae. In: EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 41 . pp. 81-93.

Ghosal, AK and Narasimhan, R (1997) An approximate analysis of notch-tip deformation under mixed-mode loading in ductile solids. In: Transactions of the ASME: Journal of Applied Mechanics, 64 (3). pp. 695-696.

Ghosal, Ashitava (2006) Robotics: Fundamental Concepts and Analysis. Oxford University Press.

Ghosal, A and Desa, S (1993) Dynamical Resolution of Redundancy for Robot Manipulators. In: Journal of Mechanical Design, 115 (3). pp. 592-598.

Ghosal, AK and Biswas, SK (1993) Examination of Stress-Fields In Elastic Plastic Indentation. In: Philosophical Magazine Part B: Physics of Condensed Matter. Electronics, Optical and Magnetic Properties, 67 (3). pp. 371-387.

Ghosal, AK and Narasimhan, R (1996) Mixed-mode fracture initiation in a ductile material with a dual population of second-phase particles. In: Materials Science & Engineering A Structural Materials: Properties, Microstructure and Processing, 211 (1-2). pp. 117-127.

Ghosal, AK and Narasimhan, R (1996) Numerical Simulations of Hole Growth and Ductile Fracture Initiation Under Mixed-Mode Loading. In: International Journal of Fracture, 77 (4). pp. 281-304.

Ghosal, AK and Narasimhan, R (1994) A finite element analysis of mixed-mode fracture initiation by ductile failure mechanisms. In: Journal of the Mechanics and Physics of Solids, 42 (6). pp. 953-978.

Ghosal, AK and Narasimhan, R (1997) A finite element study of the effect of void initiation and growth on mixed-mode ductile fracture. In: Mechanics of Materials, 25 (2). pp. 113-127.

Ghosal, Ashitava (2018) Resolution of redundancy in robots and in a human arm. In: MECHANISM AND MACHINE THEORY, 125 . pp. 126-136.

Ghosal, Ashitava and Ravani, Bahram (2001) A differential-geometric analysis of singularities of point trajectories of serial and parallel manipulators. In: Journal of Mechanical Design, 123 (1). pp. 80-89.

Ghosal, Ashitava and Shyam, Ashith RB (2016) A Three-degree-of-freedom Parallel Manipulator for Concentrated Solar Power Towers: Modeling, Simulation and Design. In: 21st International Conference on Concentrating Solar Power and Chemical Energy Systems (SolarPACES), OCT 13-16, 2015, Cape Town, SOUTH AFRICA.

Ghosh, A and Boggavarapu, P and Ravikrishna, RV (2021) Measurement of liquid and vapor penetration of evaporating methanol sprays. In: Atomization and Sprays, 30 (10). pp. 741-757.

Ghosh, A and Boggavarapu, P and Ravikrishna, RV (2021) Measurement of liquid and vapor penetration of evaporating methanol sprays. In: Atomization and Sprays, 30 (10). pp. 741-757.

Ghosh, A and Boggavarapu, P and Ravikrishna, RV (2019) Methods of evaluation of liquid length measurement for evaporating sprays. In: Journal of Flow Visualization and Image Processing, 26 (4). pp. 359-369.

Ghosh, A and Ravikrishna, RV (2022) ASSESSMENT OF MICROEXPLOSION PHENOMENON OF METHANOL-IN-DIESEL EMULSION DROPLETS UNDER ENGINE-LIKE CONDITIONS. In: Atomization and Sprays, 32 (3). pp. 53-60.

Ghosh, A and Ravikrishna, RV (2021) Evaporating spray characteristics of methanol-in-diesel emulsions. In: Fuel, 290 .

Ghosh, A and Ravikrishna, RV (2020) Spray characteristics of methanol-in-diesel emulsion. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-26 July 2018, Chicago; United States.

Ghosh, A and Ravikrishna, RV (2022) Strategies for Improved Stability of Methanol-in-Diesel Emulsions. In: Journal of Energy Resources Technology, Transactions of the ASME, 144 (10).

Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.

Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, P and Ananthasuresh, GK (2020) Discrete element modeling of cantilever beams subjected to geometric nonlinearity and particle�structure interaction. In: Computational Particle Mechanics . (In Press)

Ghosh, Priyadarshini and Kumar, Shishir and Ramalingam, Gopalakrishnan and Kochat, Vidya and Radhakrishnan, Madhavan and Dhar, Sukanya and Suwas, Satyam and Ghosh, Arindam and Ravishankar, N and Raghavan, Srinivasan (2015) Insights on Defect-Mediated Heterogeneous Nucleation of Graphene on Copper. In: JOURNAL OF PHYSICAL CHEMISTRY C, 119 (5). pp. 2513-2522.

Ghosh, Prosenjit and Prasanna, K and Banerjee, Yogaraj and Williams, Ian S and Gagan, Michael K and Chaudhuri, Atanu and Suwas, Satyam (2018) Rainfall seasonality on the Indian subcontinent during the Cretaceous greenhouse. In: SCIENTIFIC REPORTS, 8 .

Ghosh, Siddharth and Ananthasuresh, GK (2012) Note on high aspect-ratio SU-8 micromechanical structures using mask-less direct laser writing. In: ASME 2012 International Manufacturing Science and Engineering Conference, June 4–8, 2012, Notre Dame, Indiana, USA.

Ghosh, T and Chen, J and Kumar, A and Tang, T and Ayranci, C (2020) Bio-cleaning improves the mechanical properties of lignin-based carbon fibers. In: RSC Advances, 10 (39). pp. 22983-22995.

Ghosh, Tanushree and Bhaduri, Swayamdipta and Montemagno, Carlo and Kumar, Aloke (2019) Sporosarcina pasteurii can form nanoscale calcium carbonate crystals on cell surface. In: PLOS ONE, 14 (1).

Ghosh, Tanushree and Ngo, Tri-Dung and Kumar, Aloke and Ayranci, Cagri and Tang, Tian (2019) Cleaning carbohydrate impurities from lignin using Pseudomonas fluorescens. In: GREEN CHEMISTRY, 21 (7). pp. 1648-1659.

Ghosh, UU and Ali, H and Ghosh, R and Kumar, A (2021) Bacterial streamers as colloidal systems: Five grand challenges. In: Journal of Colloid and Interface Science, 594 . pp. 265-278.

Ginley, D and Aswathi, R and Atchuta, SR and Basu, B and Basu, S and Christian, JM and Dan, A and Dani, N and Das, R N and Dutta, P and Flueckiger, SM and Garimella, SV and Goswami, Y and Ho, CK and Kedare, S and Khivsara, SD and Kumar, P and Madhusoodana, CD and Mallikarjun, B and Mira-Hernández, C and Orosz, M and Ortega, JD and Parida, DR and Prasad, MS and Ramesh, K and Advaith, S and Saha, SK and Sakthivel, S and Sharma, S and Singh, P and Singh, S and Srikanth, O and Srinivasan, V and Weibel, JA and Wendelin, T (2020) Multiscale Concentrated Solar Power. [Book Chapter]

Ginley, DS and Tumas, W and Howe, MM and Dutta, P and Ho, CK and Vasi, JM and Van Hest, MFAM and Curtright, AE and Kumar, P and Chattopadhyay, K (2018) Solar Energy Research Institute for India and the United States (SERIIUS): A Focused Solar Consortium. In: 7th IEEE World Conference on Photovoltaic Energy Conversion, WCPEC 2018, 10 - 15 June 2018, Waikoloa Village, pp. 2488-2491.

Giri, A and Narasimham, GSVL and Krishna Murthy, MV (2003) Combined natural convection heat and mass transfer from vertical fin array. In: International Journal of Heat and Fluid Flow, 24 (1). pp. 100-113.

Giri, Asis and Arakeri, VH (1998) Measured pulse width of sonoluminescence flashes in the form of resonance radiation. In: Physical Review E, 58 (3). R2713-R2716.

Giri, BR and Shrestha, KP and Mai, TVT and Giri, S and Adil, M and Naik, RT and Mauss, F and Huynh, LK (2023) A Theoretical Study of NH2 Radical Reactions with Propane and Its Kinetic Implications in NH3-Propane Blends’ Oxidation. In: Energies, 16 (16).

Giri, Pritam and Shukla, Ratnesh K (2017) Energy Loss Minimizing Drag Reduction and Self-propulsion Strategies. In: 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, DEC 12-14, 2014, Indian Inst Technol Kanpur, Kanpur, INDIA, pp. 73-81.

Giri, Pritam and Shukla, Ratnesh K (2022) Optimal transport of surface-actuated microswimmers. In: Physics of Fluids, 34 (4). ISSN 1070-6631

Godthi, Vamsy and Reddy, Jayaprakash and Pratap, Rudra (2015) A Study of Pressure-Dependent Squeeze Film Stiffness as a Resonance Modulator Using Static and Dynamic Measurements. In: JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 24 (6). pp. 1712-1719.

Gogate, GR and Munjal, ML (1995) Analytical And Experimental Aeroacoustic Studies Of Open-Ended 3-Duct Perforated Elements Used In Mufflers. In: Journal Of The Acoustical Society Of America, 97 (5). pp. 2919-2927.

Gogate, GR and Munjal, ML (1993) Analytical solution of sound propagation in lined or unlined circular ducts with laminar mean flow. In: Journal of Sound and Vibration, 160 (3). pp. 465-484.

Gogate, GR and Munjal, ML (1992) Analytical solution of the laminar mean flow wave equation in a lined or unlined two-dimensional rectangular duct. In: Journal of the Acoustical Society of America, 92 (5). pp. 2915-2923.

Gogate, GR and Munjal, ML (1996) Sound propagation in ducts with bulk reacting lining in the presence of laminar mean flow. In: Journal of the Acoustical Society of America, 99 (3). pp. 1779-1782.

Gopalan, E Veena and Malini, KA and Kumar, D Sakthi and Yoshida, Yasuhiko and Al-Omari, IA and Saravanan, S and Anantharaman, MR (2009) On the dielectric dispersion and absorption in nanosized manganese zinc mixed ferrites. In: nternational Conference on Nanoscience and Nanotechnology, FEB 25-29, 2008, Melbourne, Australia.

Gorthi, Subrahmanyam and Mohanty, Atanu and Chatterjee, Anindya (2006) Cantilever beam electrostatic MEMS actuators beyond pull-in. In: Journal of Micromechanics and Microengineering, 16 (9). pp. 1800-1810.

Gotkhindi, Tejas P and Simha, KRY (2015) In-plane effective shear modulus of generalized circular honeycomb structures and bundled tubes in a diamond array structure. In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 101 . pp. 292-308.

Gotkhindi, Tejas P and Simha, KRY (2015) In-plane elastic responses of circular cell honeycombs and bundled circular tubes in a diamond array structure. In: COMPOSITE STRUCTURES, 134 . pp. 311-330.

Gotkhindi, Tejas P and Simha, KRY (2013) Transverse elastic response of bundled coated cylinders. In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 76 . pp. 70-85.

Gotkhindi, Tejas P and Simha, KRY (2014) Transverse orthotropic elastic moduli of bundled coated thin elliptical tubes. In: COMPOSITE STRUCTURES, 118 . pp. 178-199.

Gourvenec, SM and Vulpe, C and Murthy, TG (2014) A method for predicting the consolidated undrained bearing capacity of shallow foundations. In: GEOTECHNIQUE, 64 (3). pp. 215-225.

Goutham, VSH and Munjal, ML (2009) Prediction of break-out noise from a finite distorted circular duct. In: UNSPECIFIED, November 2009, Hyderabad.

Govardhan, RN and Williamson, CHK (2006) Defining the 'modified Griffin plot' in vortex-induced vibration: revealing the effect of Reynolds number using controlled damping. In: Journal of Fluid Mechanics, 561 . pp. 147-180.

Govardhan, R and Williamson, CHK (2004) Critical mass in vortex-induced vibration of a cylinder. In: European Journal of Mechanics - B/Fluids, 23 (1).

Govardhan, RN and Arakeri, JH (2011) Fluid Mechanics of Aquatic Locomotion at Large Reynolds Numbers. In: Journal of the Indian Institute of Science, 91 (3). pp. 429-452.

Govardhan, RN and Srinivas, GS and Asthana, A and Bobji, MS (2009) Time dependence of effective slip on textured hydrophobic surfaces. In: Physics of Fluids, 21 (5).

Govardhan, RN and Williamson, CHK (2006) Defining the ‘modified Griffin plot’ in vortex-induced vibration: revealing the effect of Reynolds number using controlled damping. In: Journal of Fluid Mechanics, 561 . pp. 147-180.

Govardhan, RN and Williamson, CHK (2005) Vortex-induced vibrations of a sphere. In: Journal of Fluid Mechanics, 531 . pp. 11-47.

Govardhan, Raghuraman N and Pawar, Pradeep S and Bobji, Musuvathi S (2011) Sustainability of apparent slip in micro-channel flows. In: 3rd Micro and Nano Flows Conference, 22-24 August 2011, Thessaloniki, Greece.

Govinda Ram, HS and Arakeri, VH (1990) Studies on Unsteady Pressure Fields in the Region of Separating and Reattaching Flows. In: Journal of Fluids Engineering, 112 (4). pp. 402-408.

Gowda, BS and Narasimham, GSVL and Murthy, MVK (1997) Forced-air precooling of spherical foods in bulk: A parametric study. In: International Journal of Heat and Fluid Flow, 18 (6). pp. 613-624.

Gowthaman, S and Tripathi, P and Ariharan, S and Ramkumar, J and Balani, K (2022) Water attenuation enhances tribological damage resistance in laser peened steel. In: Materials Letters, 308 .

Goyal, V and Kumar, A and Sharma, P and Verma, GC (2024) Metal-based Additive Manufacturing Technologies. [Book Chapter]

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Analysis of a collision model in a Co-Axial liquid fuel spray in a heated air chamber. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Correlations of vaporization performance of conventional and biofuel sprays in a crossflow heated chamber. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39 (10). pp. 1478-1486.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Dispersion and vaporization of biofuels and conventional fuels in a crossflow pre-mixer. In: International Journal of Heat and Mass Transfer, 55 (1-3). pp. 336-346.

Gu, Xin and Basu, Saptarshi and Kumar, Ranganathan (2012) Vaporization and collision modeling of liquid fuel sprays in a co-axial fuel and air pre-mixer. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (19-20). pp. 5322-5335.

Gudla, Pradeep K and Sonti, Venkata R and Chatterjee, Anindya (2003) Feedforward control of acausal systems under broadband deterministic forcing. In: SPIE: Smart Materials, Structures, and Systems, 12-14 December, Bangalore, India, Vol.5062, 613-620.

Gulihonenahali Rajkumar, A and Hemath, M and Kurki Nagaraja, B and Neerakallu, S and Thiagamani, SMK and Asrofi, M (2022) An artificial neural network prediction on physical, mechanical, and thermal characteristics of giant reed fiber reinforced polyethylene terephthalate composite. In: Journal of Industrial Textiles, 51 (1). 769S -803S.

Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.

Gundiah, Namrata and Babu, Anju R and Pruitt, Lisa A (2013) Effects of elastase and collagenase on the nonlinearity and anisotropy of porcine aorta. In: PHYSIOLOGICAL MEASUREMENT, 34 (12). pp. 1657-1673.

Gundiah, Namrata and Narasimhan, Arunn and Dutta, Pradip (2011) Macromolecular Transport Through Porous Arterial Walls. In: Journal of the Indian Institute of Science, 91 (3). pp. 367-382.

Guntanur, R and Patel, A and Biradar, V and Kumar, P (2021) COUPLED THERMAL-STRUCTURAL ANALYSIS of GENERATOR for sCO2 TURBOMACHINERY. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-03 Dec 2021, Virtual, Online.

Gupta, A and Jog, CS (2022) A Monolithic Finite Element Formulation for Magnetohydrodynamics Involving a Compressible Fluid. In: Fluids, 7 (1).

Gupta, A and Likozar, B and Jana, R and Chanu, WC and Singh, MK (2022) A review of hydrogen production processes by photocatalytic water splitting – From atomistic catalysis design to optimal reactor engineering. In: International Journal of Hydrogen Energy .

Gupta, A and Mittal, M and Singh, MK and Suib, SL and Pandey, OP (2018) Low temperature synthesis of NbC/C nano-composites as visible light photoactive catalyst. In: Scientific Reports, 8 (1).

Gupta, D and Arakeri, JH (2021) Gust enhancement using jet at the trailing edge of a pair of pitching foils. In: Sadhana - Academy Proceedings in Engineering Sciences, 46 (3).

Gupta, D and Udupa, A and Viswanathan, K (2021) Evaluating performance metrics in non-homogeneous cutting processes using a random-grid based digital image correlation (DIC) method. In: Manufacturing Letters, 30 . pp. 44-48.

Gupta, D and Udupa, A and Viswanathan, K (2024) In situ analysis of plastic flow near interfaces and free surfaces. In: Measurement Science and Technology, 35 (4).

Gupta, D and Udupa, A and Viswanathan, K (2020) Some quantitative analogies between large-strain plasticity and rectilinear fluid flow. In: ASME 2020 15th International Manufacturing Science and Engineering Conference, MSEC 2020, 3 Sep 2020, Virtual.

Gupta, D and Viswanathan, K (2022) Random grid-based dic analysis of plastic flow near interfaces in deformation processing. In: ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022, 27 June - 1 July 2022, West Lafayette.

Gupta, Mayank and Pramanik, Santanu and Ravikrishna, RV (2016) Development of a syngas-fired catalytic combustion system for hybrid solar-thermal applications. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 1023-1030.

Gupta, P and Kumar, P and Rao, SMV (2023) Low-frequency unsteadiness of recompression shock structures in the diffuser of supersonic ejectors. In: Physics of Fluids, 35 (3).

Gupta, P and Rao, SMV and Kumar, P (2023) Performance evaluation of air ejectors using artificial neural network approach. In: Sadhana - Academy Proceedings in Engineering Sciences, 48 (2).

Gupta, Pradeep and Rao, Srisha MV and Kumar, Pramod (2019) Experimental investigations on mixing characteristics in the critical regime of a low-area ratio supersonic ejector. In: PHYSICS OF FLUIDS, 31 (2).

Gupta, R and Pandey, K and Thomas, R and Basu, S and Shetty, B and Shetty, R and Roy, AS (2021) Propensity of aerosol and droplet creation during oculoplastic procedures: A risk assessment with high-speed imaging amidst COVID-19 pandemic. In: Indian Journal of Ophthalmology, 69 (3). pp. 734-738.

Gupta, SC and Arora, PR (1992) Analytical and numerical solutions of inward spherical solidification of a superheated melt with radiative-convective heat transfer and density jump at freezing front. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 27 (6). pp. 377-384.

Gupta, SC and Arora, PR (1988) Outward spherical solidification of a superheated melt with time dependent boundary flux. In: Applied Scientific Research, 45 (1). 17 -31.

Gupta, SK and Pramanik, S and Gordon, RL and Ravikrishna, RV and Arghode, VK (2022) Combustion characteristics of a reverse-cross-flow combustor. In: Journal of the Energy Institute, 103 . pp. 1-16.

Gupta, VH (1995) On Independence of Reciprocity Symmetry and conservativeness of One-Dimensional Linear Systems. In: Journal of Sound and Vibration, 179 (3). pp. 547-552.

Gupta, VH (1995) A note on three-dimensional effects in segmentation approach for analysis of one-dimensional waves in ducts of varying cross-sectional area. In: Journal of Sound and Vibration, 182 (2). pp. 323-327.

Gupta, VH and Easwaran, V and Munjal, ML (1995) A Modified Segmentation Approach for Analyzing Plane Wave Propagation in Non-Uniform Ducts with Mean Flow. In: Journal of Sound and Vibration, 182 (5). pp. 697-707.

Gupta, VH and Munjal, ML (1993) Time-domain-finite-wave analysis of the engine exhaust system by means of the stationary-frame method of characteristics. Part I. Theory. In: Sadhana : Academy Proceedings in Engineering Sciences, 18 (Part 6). pp. 911-925.

Gupta, VH and Munjal, ML (1993) Time-domain-finite-wave analysis of the engine exhaust system by means of the stationary-frame method of characteristics. Part II. Computed results and experimental corroboration thereof. In: Sadhana : Academy Proceedings in Engineering Sciences, 18 (Part 6). pp. 927-941.

Gupta, VH and Munjal, ML (1992) On numerical prediction of the acoustic source characteristics of an engine exhaust system. In: Journal of the Acoustical Society of America, 92 (5). pp. 2716-2725.

Gurao, NP and Suwas, Satyam (2012) Deformation behaviour of Titanium in torsion. In: 16th International Conference on the Textures of Materials (ICOTOM 16), DEC 12-17, 2011, Indian Inst Technol Bombay, Mumbai, INDIA, pp. 826-829.

Gurudatt, HM and Narasimham, GSVL and Gowda, BS (2020) Performance of Automotive Air Conditioning System with R134a and R1234yf. In: International Journal of Air-Conditioning and Refrigeration, 29 (1).

Gurudatt, HM and Narasimham, GSVL and Sadashive Gowda, B (2024) EXPERIMENTAL STUDY ON AN AUTOMOBILE AIR CONDITIONING SYSTEM WITH INTERNAL HEAT EXCHANGER USING THE REFRIGERANTS HFC134a AND HFO1234yf. In: Heat Transfer Research, 55 (7). pp. 1-18.

Gurudatt, HM and Narasimham, GSVL and Sadashive Gowda, B (2022) PERFORMANCE OF FLAT-TUBE LOUVERED-FIN AUTOMOTIVE EVAPORATOR WITH R1234yf. In: ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, 30 October - 3 November 2022, Columbus.

Gurumoorthy, B and Nagaraj, H (2001) Automatic Extraction of Machining Primitives with Respect to Preformed Stock for Process Planning. In: Journal of Manufacturing Systems, 20 (3). pp. 210-222.

Guruprasad, A and Sudhakar, A and Seshan, S and Muthukumarasamy, S (1996) Structure and properties of zinc alloy based metal matrix composites. In: Symposium on Processing and Fabrication of Advanced Materials IV, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.

Guruprasad, KR and Ghosal, A (1999) Model reference learning control for rigid robots. In: ASME 1999 Design Engineering Technical Conferences, DETC 1999, 12-16 Sep 1999, pp. 445-454.

Gururaja, GJ and Tirunarayanan, MA and Ramachandran, Arcot (1967) Dynamic viscosity of gas mixtures. In: Journal of Chemical and Engineering, 12 (4). pp. 562-567.

Gutta, B and Huilgol, P and Perugu, CS and Kumar, G and Reddy, ST and Toth, LS and Bouaziz, O and Kailas, SV (2024) A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility. In: Materials, 17 (1).

H

Hampali, S and Anoosha Pai, S and Ananthasuresh, GK (2020) A Tunable Variable-Torque Compliant Hinge Using Open-Section Shells. In: Journal of Mechanisms and Robotics, 12 (6).

Hampali, Shamanth and Anoosha, Pai S and Ananthasuresh, GK (2019) An Open-Section Shell Designed for Customized Bending and Twisting to Ease Sitting and Rising in a Chair. [Book Chapter]

Handral, P and Rangarajan, R (2020) An elastica robot: Tip-control in tendon-actuated elastic arms. In: Extreme Mechanics Letters, 34 .

Hariharan, R and Nagaraj, HS (1974) Synchronous decade up/down counter. In: International Journal of Electronics, 36 (6). pp. 805-809.

Hariharan, R and Kulkarni, VD (1982) A Microprocessor-Based Pulse-Height Analyzer. In: IEEE Micro, 2 (3). pp. 86-91.

Hariharan, R and Memon, KAP (1979) A Hydraulic Micromanipulator. In: IEEE Transactions on Biomedical Engineering, 26 (1). pp. 56-58.

Hariharan, R and Memon, KAP (1979) A Hydraulic Micromanipulator. In: IEEE Transactions on Biomedical Engineering, 26 (1). pp. 56-58.

Hariharan, R and Menon, KAP (1978) A Fluidic Drive System for Intra-Aortic Balloon Heart Assist Device. In: IEEE Transactions on Biomedical Engineering, BME-25 (3). pp. 301-303.

Hariharan, R and Menon, KAP (1978) A Nonmoving-Part Fluidic Display Using Photoelastic Effect. In: Transactions on Instrumentation and Measurement, 27 (1). pp. 68-70.

Hariharan, R and Rao, KS and Bhattacharjee, JN (1978) Design of A Microprocessor-Based numerical control-system. In: IEEE Transactions on Industrial Electronics and Control Instrumentation, 25 (4). 355-362 .

Hariharan, R and Rao, SN (1974) Biquadratic pulse transmission networks. In: India, IEE-IERE Proceedings - , 12 (4). pp. 136-138.

Hariharan, R and Sastry, Adisesha P (1979) Position and Feed-Rate Control for Contouring Numerical-Control Systems. In: IEEE Transactions on Industrial Electronics and Control Instrumentation, 26 (2). pp. 79-82.

Hariharan, Ramesh and Bhaskar, Majumdar S (1978) Moiré Displacement Transducer for N/C Systems. In: Transactions on Instrumentation and Measurement, 27 (1). pp. 8-10.

Hariharan, V and Chowdhury, AR and Rao S, S and Chakravortty, D and Basu, S (2023) phoP maintains the environmental persistence and virulence of pathogenic bacteria in mechanically stressed desiccated droplets. In: iScience, 26 (5).

Harish, J and Dutta, P (2005) Heat transfer analysis of pusher type reheat furnace. In: ronmaking and Steelmaking, 32 (2). pp. 151-158.

Hatte, S and Pandey, K and Pandey, K and Chakraborty, S and Basu, S (2019) Universal evaporation dynamics of ordered arrays of sessile droplets. In: Journal of Fluid Mechanics, 866 . pp. 61-81.

Hatte, S and Pandey, K and Pandey, K and Chakraborty, S and Basu, S (2019) Universal evaporation dynamics of ordered arrays of sessile droplets. In: Journal of Fluid Mechanics, 866 . pp. 61-81.

Hatte, Sandeep and Dhar, Riju and Bansal, Lalit and Chakraborty, Suman and Basu, Saptarshi (2019) On the lifetime of evaporating confined sessile droplets. In: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 560 . pp. 78-83.

Hatte, Sandeep and Mira-Hernandez, Carolina and Advaith, S and Tinaikar, Aashay and Chetia, Utpal Kumar and Manu, K V and Chattopadhyay, Kamanio and Weibel, Justin A and Garimella, Suresh V and Srinivasan, Vinod and Basu, Saptarshi (2016) Short and long-term sensitivity of lab-scale thermocline based thermal storage to flow disturbances. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 936-948.

Havemann, HA and Rao, MRK and Natarajan, A and Narasimhan, TL (2008) Alcohol in Diesel Engines. In: Journal of Indian Institute of Science, 88 (3). pp. 820-826.

Havemann, HA and Rao, MRK and Natarajan, A and Narasimhan, TL (2008) Alcohol with Normal Diesel Fuels-Part II, Gas and Oil Power. In: Journal of Indian Institute of Science, 88 (3). pp. 827-832.

Hegde, O and Basu, S (2021) Spatio-temporal modulation of self-assembled central aggregates of buoyant colloids in sessile droplets using vapor mediated interactions. In: Journal of Colloid and Interface Science, 598 . pp. 136-146.

Hegde, O and Chatterjee, R and Rasheed, A and Chakravortty, D and Basu, S (2022) Multiscale vapor-mediated dendritic pattern formation and bacterial aggregation in complex respiratory biofluid droplets. In: Journal of Colloid and Interface Science, 606 . pp. 2011-2023.

Hegde, O and Chattopadhyay, A and Basu, S (2021) Universal spatio-topological control of crystallization in sessile droplets using non-intrusive vapor mediation. In: Physics of Fluids, 33 (1).

Hegde, O and Kabi, P and Agarwal, S and Basu, S (2019) Controlling self-assembly and buckling in nano fluid droplets through vapour mediated interaction of adjacent droplets. In: Journal of Colloid and Interface Science, 541 . pp. 348-355.

Hegde, O and Kabi, P and Basu, S (2020) Enhancement of mixing in a viscous, non-volatile droplet using a contact-free vapor-mediated interaction. In: Physical Chemistry Chemical Physics, 22 (26). pp. 14570-14578.

Hegde, Omkar and Chakraborty, Shubhankar and Kabi, Prasenjit and Basu, Saptarshi (2018) Vapor mediated control of microscale flow in sessile droplets. In: PHYSICS OF FLUIDS, 30 (12).

Hegde, S and Ananthasuresh, GK (2020) Design of compliant mechanisms for practical applications using selection maps. In: 14th National Conference on Machines and Mechanisms, NaCoMM 2009, 17-18 December 2009, National Institute of Technology Durgapur; India, pp. 27-36.

Hegde, S and Ananthasuresh, GK (2007) Topology Optimization of Compliant Micromechnisms with Manufaturing Constraints Imposed by the Wet Ecthing of (110) Silicon. In: 2nd National ISSS Conference on MEMS, Microsensors, Smart Materials, Structures, and Systems, , Nov. 16-17, 2007, Pilani, India.

Hegde, Sudarshan and Ananthasuresh, GK (2010) Design of Single-Input-Single-Output Compliant Mechanisms for Practical Applications Using Selection Maps. In: Journal of Mechanical Design, 132 (8).

Hegde, Sudarshan and Ananthasuresh, GK (2008) Topology Optimization of Micromachined Structures with the Manufacturing Constraints of KOH Etching of (110) Silicon. In: CD-ROM proceedings of the ASME 2008 International Design Engineering Technical Conferences, Aug. 3-6, 2008, New York City, NY, USA., Aug. 3-6, 2008, New York City, NY.

Hegde, Sudarshan and Ananthasuresh, GK (2012) A spring-mass-lever model, stiffness and inertia maps for single-input, single-output compliant mechanisms. In: MECHANISM AND MACHINE THEORY, 58 . pp. 101-119.

Himabindu, M and Ravikrishna, RV (2014) Performance Assessment of a Small Biogas-fuelled Power Generator Prototype. In: JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 73 (12). pp. 781-785.

Himabindu, M and Ravikrishna, RV (2010) Potential of bio-DME as a transportation fuel for India. In: Journal of Renewable and Sustainable Energy, 2 (5).

Ho, Clifford K and Carlson, Matthew and Garg, Pardeep and Kumar, Pramod (2016) COST AND PERFORMANCE TRADEOFFS OF ALTERNATIVE SOLAR-DRIVEN S-CO2 BRAYTON CYCLE CONFIGURATIONS. In: 9th ASME International Conference on Energy Sustainability, JUN 28-JUL 02, 2015, San Diego, CA.

Ho, Clifford K and Carlson, Matthew and Garg, Pardeep and Kumar, Pramod (2016) COST AND PERFORMANCE TRADEOFFS OF ALTERNATIVE SOLAR-DRIVEN S-CO2 BRAYTON CYCLE CONFIGURATIONS. In: 9th ASME International Conference on Energy Sustainability, JUN 28-JUL 02, 2015, San Diego, CA.

Ho, Clifford K and Carlson, Matthew and Garg, Pardeep and Kumar, Pramod (2016) Technoeconomic Analysis of Alternative Solarized s-CO2 Brayton Cycle Configurations. In: JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 138 (5).

Hoque, SJ and Kumar, P (2023) Novel Supercritical Carbon Dioxide Cycle for a Waste Recovery Application. In: 3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering, FLAME 2022, 3-5 August 2022, Noida, pp. 51-56.

Hoque, SJ and Kumar, P and Dutta, P (2023) Concentrating solar powered transcritical co2 power generation cycle for the union territory of ladakh, india. In: International Journal of Energy for a Clean Environment, 24 (4). 17- 40.

Hoque, SJ and Kumar, P and Gopi, PC (2022) INFLUENCE OF GEOMETRIC PARAMETERS FOR A 100 KW INWARD FLOW RADIAL SUPERCRITICAL CO2TURBINE. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.

Hoque, SJ and Kumar, P and Gopi, PC (2023) Influence of Geometric Parameters for a 100 kW Inward Flow Radial Supercritical CO2 Turbine. In: Journal of Engineering for Gas Turbines and Power, 145 (1).

Hoque, SJ and Kumar, P and Gopi, PC (2023) ONE DIMENSIONAL MODEL TO PREDICT THE TOTAL PRESSURE LOSS OF VOLUTE FOR INWARD FLOW RADIAL SUPERCRITICAL CO2 TURBINES. In: UNSPECIFIED.

Hoque, SJ and Kumar, P and Gopi, PC (2024) Quasi-One-Dimensional Loss Model of Volute Using Boundary Layer Approach for Inward Flow Radial Supercritical CO2 Turbines. In: Journal of Engineering for Gas Turbines and Power, 146 (1).

Hoque, SJ and Kumar, P and Gopi, PC (2022) Specific Speed Considerations for Inward Flow Radial Supercritical CO2 Turbines. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.

Hoque, Sazid Zamal and Anand, D Vijay and Patnaik, B S V (2018) The dynamics of a healthy and infected red blood cell in flow through constricted channels: A DPD simulation. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 34 (9).

Hota, RN and Munjal, ML (2008) Intake source characterization of a compression ignition engine: Empirical expressions. In: Noise Control Engineering Journal, 56 (2). pp. 92-106.

Hota, RN and Munjal, ML (2004) A New Hybrid Approach for the Thermo-Acoustic Modelling of Engine Exhaust Systems. In: International Journal of Acoustics and Vibration, 9 (3). pp. 129-38.

Hota, RN and Munjal, ML (2006) Prediction of the exhaust noise of an automotive engine and insertion loss of commercial mufflers using hybrid approach. In: NSA 2006, 16-17 Nov 2006, NPL, New Delhi.

Hota, RN and Munjal, ML and Mukherjee, NK (2008) Evaluation of engine acoustic source characteristics using AVL BOOST software. In: AVL Advanced Simulation Technologies Indian User Conference 2008.

I

Idahosa, Uyi and Santhosh, R and Miglani, Ankur and Basu, Saptarshi (2016) Response Dynamics of Recirculation Structures in Coaxial Nonpremixed Swirl-Stabilized Flames Subjected to Acoustic Forcing. In: JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 8 (1, SI).

Ing, Dr and Havemann, HA and Narasimhan, TL (1957) Verbrennung and Vergasung Schwerer flussiger Kraftstoffe Einer Wirbelkammer. In: Journal of the Indian Institute of Science, 18 (7). pp. 208-214.

Inkson, BJ and Wang, JJ and Anantheshwara, A and Bobji, MS and Lockwood, AJ (2012) Friction induced phase transformations at surfaces characterised in-situ by TEM nanotribology. In: 10th Asia-Pacific Microscopy Conference, Feb 5-9, 2012, Perth, Australia.

Islam, SKS and Wijeysundera, NE and Chou, SK and Srinivasan, K (2002) Estimation of thermal moisture diffusivity from liquid redistribution measurements. In: Journal of Porous Media, 5 (4). pp. 240-251.

Islam, Sk Tanbir and Das, Prosenjit and Das, Santanu (2015) Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs. In: METALS AND MATERIALS INTERNATIONAL, 21 (2). pp. 311-323. (In Press)

Iwai, Y and Honda, T and Miyajima, T and Iwasaki, Y and Surappa, MK and Xu, JF (2000) Dry sliding wear behavior of $Al_{2}O_{3}$ fiber reinforced aluminum composites. In: Composites Science and Technology, 60 (09). pp. 1781-1789.

Iyengar, KT Sundara Raja and Raman, PV (1980) Steady-State Response of Thick Rectangular Plates. In: Journal of the Engineering Mechanics Division, 106 (4). pp. 842-844.

Iyengar, KT Sundara Raja and Chandrashekhara, K (1967) Thermal sresses in afinite solid cylinder due to steady temperature variation along the curved and end surface. In: International Journal of Engineering Science, 5 (4). pp. 393-413.

Iyengar, KT Sundara Raja and Chandrashekhara, K (1966) Thermal stresses in rectangular plates. In: Applied Scientific Research, 15 (1). pp. 141-160.

Iyengar, RN and Popp, K (1994) Random vibration of a galloping oscillator in wind. In: 6th International Conference on Structural Safety and Reliability (ICOSSAR 93), AUG 09-13, 1993, Innsbruck, Austria.

Iyengar, TKS (1981) The information community - its vital link for progress in the third-world countries. In: Proceedings of the American Society for Information Science, 18 . pp. 47-50.

Iyer, KV and Taubenberger, A and Zeidan, SA and Dye, NA and Eaton, S and Jülicher, F (2021) Apico-basal cell compression regulates Lamin A/C levels in epithelial tissues. In: Nature Communications, 12 (1).

Iyer, RN and Arakeri, VH (1990) Geometric Effects-in Cavitation Noise. In: Acustica, 72 (2). pp. 153-156.

J

J, AR and Kailas, SV (2020) Evolution of wear debris morphology during dry sliding of Ti�6Al�4V against SS316L under ambient and vacuum conditions. In: Wear, 456-57 .

J, AR and Murthy H N, S and L, A and H, SK (2020) A review on friction stir welded aluminium copper specimens. In: Advances in Materials and Processing Technologies, 8 (2). pp. 1255-1269.

Jacob, S and Karunanithi, R and Narsimham, GSVL and Kranthi, Kumar J and Damu, C and Praveen, T and Samir, M and Mallappa, A (2013) Studies on an improved indigenous pressure wave generator and its testing with a pulse tube cooler. In: Advances in Cryogenic Engineering, 17–21 June 2013, Anchorage, Alaska, USA.

Jaddivada, S and Gundiah, N (2023) Physical biology of cell�substrate interactions under cyclic stretch. In: Biomechanics and Modeling in Mechanobiology .

Jagadeesha, C B (2017) The combined theoretical and experimental approach to arrive at optimum parameters in friction stir welding. In: Journal of the Mechanical Behavior of Materials, 26 (3-4). pp. 133-138. ISSN 0334-8938

Jagadeesha, CB (2014) Dissimilar friction stir welding between aluminum alloy and magnesium alloy at a low rotational speed. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 616 . pp. 55-62.

Jagadeesha, CB (2016) Dissimilar friction stir welding between aluminum alloy and magnesium alloy at a low rotational speed (Retraction of vol 616, pg 55, 2014). In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 656 . p. 275.

Jagadeesha, CB (2017) FSW between Al alloy and Mg Alloy: the comparative study. In: Journal of the Mechanical Behavior of Materials, 26 (1-2). pp. 25-42. ISSN 0334-8938

Jagadeesha, CB (2018) Flow analysis of materials in friction stir welding. In: Journal of the Mechanical Behavior of Materials, 27 (3-4).

Jaidi, J and Dutta, P (2001) Modeling of Transport Phenomena in a Gas Metal Arc Welding Process. In: Numerical Heat Transfer, Part A: Applications, 40 (5). pp. 543-562.

Jain, J and Dutta, P and Kumar, A (2006) Numerical simulation of Freckles Formation during Directional Solidification of Aqueous Ammonium Chloride. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Jain, Jayesh and Kumar, Arvind and Dutta, Pradip (2007) Numerical studies on channel formation and growth during solidification: Effect of process parameters. In: Journal of Heat Transfer, 129 (4). pp. 548-558.

Jain, K and Chate, A and Dash, S and Dutta, P (2024) Thermochemical Energy Storage Systems. In: Advancements In Non-Conventional Cooling And Thermal Storage Strategies . pp. 137-178.

Jain, Mohit and Tomar, Gaurav and Ravikrishna, RV and Prakash, Surya R and Raghunandan, BN (2013) NUMERICAL SIMULATIONS OF LIQUID JET BREAK UP IN A CROSSFLOW. In: UNSPECIFIED.

Jain, Nitin K and Sonti, Venkata R (2017) Structural Acoustics of a Rectangular Panel Backed by a Cavity: An Analytical Matrix Approach. In: JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 139 (3).

Jain, Noopur and Ravishankar, N and Madras, Giridhar (2017) Spectroscopic and kinetic insights of Pt-dispersion over microwave-synthesized GO-supported Pt-TiO2 for CO oxidation. In: MOLECULAR CATALYSIS, 432 . pp. 88-98.

Jain, Rajeev and Ramachandra, K and Simha, KRY (2004) Impact on spinning discs. In: Eighth International Symposium on Plasticity and Impact Mechanics (IMPLAST 2003), MAR 16-19, 2003, New Delhi, INDIA.

Jain, Rajeev and Ramachandra, K and Simha, KRY (1999) Rotating anisotropic disc of uniform strength. In: International Journal of Mechanical Sciences, 41 (6). 639-648 .

Jain, Rajeev and Ramachandra, K and Simha, KRY (2000) Singularity in rotating orthotropic discs and shells. In: International Journal of Solids and Structures, 37 (14). pp. 2035-2058.

Jain, S and Chakravortty, D and Basu, S (2024) Interfacial Stresses within Droplets and Channels Influence Bacterial Physiology: A Perspective. In: Langmuir .

Jain, S and Singh, A and Tiwari, N and Naik, A and Chatterjee, R and Chakravortty, D and Basu, S (2023) Observations on phenomenological changes in Klebsiella Pneumoniae under fluidic stresses. In: Soft Matter, 9 (47). pp. 9239-9253.

Jaiswal, A and Barai, S and Jha, A and Dsouza, DA and Aggarwal, A (2024) Workspace and Trajectory Analysis of the 3-RPR Planar Parallel Manipulators with Joint Clearance. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 767-778.

Jaiswal, Ankush Kumar and Mitra, Sourav and Dutta, Pradip and Srinivasan, Kandadai and Murthy, Srinivasa S (2016) Influence of cycle time and collector area on solar driven adsorption chillers. In: SOLAR ENERGY, 136 . pp. 450-459.

Janardhana, MN and Biswas, SK (1979) Modes of deformation in aluminium rings subjected to static axial compression. In: International Journal of Mechanical Sciences, 21 (12). pp. 699-712.

Jasvanth, V S and Ambirajan, Amrit and Adoni, Abhijit A and Arakeri, Jaywant H (2019) Numerical investigation of an evaporating meniscus in a heated capillary slot. In: HEAT AND MASS TRANSFER, 55 (12). pp. 3675-3688.

Jasvanth, VS and Ambirajan, Amrit and Adoni, Abhijit A and Kumar, D and Gupta, PP and Bhandari, DR and Dutta, Pradip (2008) Experimental Results from a Three-port Acetone CPL with Tubular Axially Grooved evaporator. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Jasvanth, VS and Ambirajan, Amrit and Arakeri, Jaywant H (2016) Experimental study on evaporation of pentane from a heated capillary slot. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 95 . pp. 466-476.

Jasvanth, VS and Ambirajan, Amrit and Kumar, Dinesh and Arakeri, Jaywant H (2013) Effect of Heat Pipe Figure of Merit on an Evaporating Thin Film. In: JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 27 (4). pp. 633-640.

Jatana, Gurneesh Singh and Himabindu, M and Thakur, Hari S and Ravikrishna, RV (2014) Strategies for high efficiency and stability in biogas-fuelled small engines. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 54 . pp. 189-195.

Jaya, Nagamani B and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. In: PHILOSOPHICAL MAGAZINE, 92 (25-27,). pp. 3326-3345.

Jayadeep, UB and Bobji, MS (2017) Energy loss due to adhesion during the impact of elastic spheres. In: 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST), DEC 11-14, 2016, Indian Inst Technol, New Delhi, INDIA, pp. 238-243.

Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy Loss in the Impact of Elastic Spheres on a Rigid Half-Space in Presence of Adhesion. In: TRIBOLOGY LETTERS, 53 (1). pp. 79-89.

Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy loss due to adhesion in longitudinal impact of elastic cylinders. In: EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 45 . pp. 20-31.

Jayadev, C and Basavaraj, TM and Pandey, K and Pinto, R and Pandey, SP and Basu, S and Roy, AS and Shetty, R (2021) Risk assessment of aerosol generation during vitreoretinal surgery using high speed imaging amidst the covid-19 pandemic. In: Translational Vision Science and Technology, 10 (12).

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Constraint loss under dynamic loading in rate independent plastic solids. In: International Journal of Fracture, 116 (2). pp. 141-160.

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials. In: International Journal of Solids and Structures, 39 (7). pp. 1757-1775.

Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2003) The effect of T-stress on plane strain dynamic crack growth in elastic-plastic materials. In: Fatigue and Fracture of Engineering Materials and Structures, 26 (7). pp. 647-660.

Jayakumar, JS and Grover, RB and Arakeri, VH (2002) Response of a two phase system subject to oscillations induced by the motion of its support structure. In: International Communications In Heat And Mass Transfer, 29 (4). pp. 519-530.

Jayakumari, HB and Munjal, ML and Sachdev, PL (1982) The flow structure of a nearly ideally expanded supersonic jet with mean shear. In: Journal of Sound and Vibration, 81 (3). pp. 437-440.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.

Jayalakshmi, S and Kailas, SV and Seshan, S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its $Al_2O_3$ fibre reinforced composites. In: Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1135-1140.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kim, KB and Fleury, E (2006) Tensile strength and fracture toughness of two magnesium metal matrix composites. In: Journal of Ceramic Processing Research, 7 (3). pp. 261-265.

Jayalakshmi, S and Kailas, Satish V and Seshan, S and Fleury, E (2000) Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites. In: Journal Of Materials Science, 41 (12). pp. 3743-3752.

Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.

Jayalakshmi, S and Singh, RA and Chen, X and Konovalov, S and Srivatsan, TS and Seshan, S and Gupta, M (2020) Role of Matrix Microstructure in Governing the Mechanical Behavior and Corrosion Response of Two Magnesium Alloy Metal Matrix Composites. In: JOM, 72 (8). pp. 2880-2891.

Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.

Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.

Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.

Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.

Jayaram, Vikram and Manna, Rampada and Kshetrapal, Manjunath G and Sarkar, Jaydeep and Biswas, Sanjay K (1996) Microstructure control and wear of Al2O3-SiC-(Al,Si) composites made by melt oxidation. In: Journal of the American Ceramic Society, 79 (3). pp. 770-772.

Jayaraman, Balaji and Bhat, Navakanta and Pratap, Rudra (2009) Thermal characterization of microheaters from the dynamic response. In: Journal of Micromechanics and Microengineering, 19 (8).

Jayasingh, EM and Tantri, Srikari P and Bhaskaran, TA and Biswas, SK and Ramasesha, Sheela K (2002) Performance of monolithic and TiB2 reinforced MoSi2 in dry sliding contact with steel. In: Materials Letters, 53 (4-5). pp. 379-383.

Jebaraj, PM and Srinivasan, MN and Seshadri, MR (1989) General and Intergranular Corrosion of Austenitic Stainless Steel Castings. In: Corrosion, 45 (11). pp. 938-942.

Jeevanashankara, * and Madhusudana, CV and Kulkarni, MB (1990) Thermal Contact Conductances of Metallic Contacts at Low Loads. In: Applied Energy, 35 (2). pp. 151-164.

Jha, Anupam Nath and Ananthasuresh, GK and Vishveshwara, Saraswathi (2007) Protein sequence design based on the topology of the native state structure. In: Journal of Theoretical Biology, 248 (1). pp. 81-90.

Jha, K and Gurumoorthy, B (2000) Automatic propagation of feature modification across domains. In: Computer Aided Design, 32 (12). pp. 691-706.

Jha, Kailash and Gurumoorthy, B (2000) Multiple feature interpretation across domains. In: Computers in Industry, 42 (01). pp. 13-32.

Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Effect of pore size and distribution on energy absorption of aluminum foams under compressive load. In: EUFOAM-2008, ESTEC, Netherlands, 8-10 July, 2008, 8-10 July, 2008, Netherlands.

Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Energy absorbing behaviour of aluminium base foams. In: IC-ICAME, July 2-5, Bangalore, July 2-5, Bangalore.

Jha, M and Narasimhan, R (1992) A finite element analysis of dynamic fracture initiation by ductile failure mechanisms in a 4340 steel. In: International Journal of Fracture, 56 (3). pp. 209-231.

Jha, Narsing K and Bhatt, Anubhav and Govardhan, Raghuraman N (2019) Effect of bubble distribution on wall drag in turbulent channel flow. In: EXPERIMENTS IN FLUIDS, 60 (8).

Jha, Narsing K and Govardhan, RN (2015) Interaction of a vortex ring with a single bubble: bubble and vorticity dynamics. In: JOURNAL OF FLUID MECHANICS, 773 . pp. 460-497.

Jiang, Fei and Keating, Adrian and Martyniuk, Mariusz and Pratap, Rudra and Faraone, L and Dell, JM (2013) Process control of cantilever deflection for sensor application based on optical waveguides. In: Journal of Microelectromechanical Systems, 22 (3). pp. 569-579.

Joarder, R and Vellala, SL and Singh, AP and Syam, S and Padhi, UP and Choudhury, SP (2021) On the radiative heat loss and axis-switching phenomena of a decaying laser spark. In: Plasma Sources Science and Technology, 30 (1).

Jog, C S (2009) A dual algorithm for the topology optimization of non-linear elastic structures. In: International Journal For Numerical Methods In Engineering, 77 (4). pp. 502-517.

Jog, CS and Bayadi, Ramaprakash (2009) Stress and strain-driven algorithmic formulations for finite strain viscoplasticity for hybrid and standard finite elements. In: International Journal For Numerical Methods In Engineering, 79 (7). pp. 773-816.

Jog, CS and Kumar, Rakesh (2010) Shortcomings of discontinuous-pressure finite element methods on a class of transient problems. In: International Journal for Numerical Methods in Fluids, 62 (3). pp. 313-326.

Jog, CS and Motamarri, Phani (2009) Energy-momentum conserving algorithm for nonlinear transient analysis within the framework of hybrid elements. In: Journal of Mechanics of Materials and Structures, 4 (1). pp. 157-186.

Jog, C S and Gautam, G S J (2017) A monolithic hybrid finite element strategy for nonlinear thermoelasticity. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 112 (1). pp. 26-57.

Jog, CS (2005) A 27-node hybrid brick and a 21-node hybrid wedge element for structural analysis. In: Finite Elements in Analysis and Design, 41 (11-12). pp. 1209-1232.

Jog, CS (2004) The Accurate Inversion of Vandermonde Matrices. In: Computers & Mathematics with Applications, 47 (6-7). pp. 921-929.

Jog, CS (2023) Algorithms for processing periodic and non-periodic signals. In: Sadhana - Academy Proceedings in Engineering Sciences, 48 (4).

Jog, CS (2023) Alternative expressions for the Riemann zeta and related functions at positive even integers and infinite sums involving zeros of Bessel and spherical Bessel functions of the first kind. In: Indian Journal of Pure and Applied Mathematics .

Jog, CS (2006) A Concise Proof of the Representation Theorem for Fourth-Order Isotropic Tensors. In: Journal of Elasticity, 85 (2). pp. 119-124.

Jog, CS (2006) Derivatives of the Stretch, Rotation and Exponential Tensors in n-Dimensional Vector Spaces. In: Journal Of Elasticity, 82 (2). pp. 175-192.

Jog, CS (2011) The Equations of Equilibrium in Orthogonal Curvilinear Reference Coordinates. In: Journal of Elasticity, 104 (1-2, S). pp. 385-395.

Jog, CS (2008) The Explicit Determination of the Logarithm of a Tensor and Its Derivatives. In: Journal of Elasticity, 93 (2). pp. 141-148.

Jog, CS (2004) Higher-order shell elements based on a Cosserat model, and their use in the topology design of structures. In: Computer Methods in Applied Mechanics and Engineering, 193 (23-26). pp. 2191-2220.

Jog, CS (2010) Improved hybrid elements for structural analysis. In: Journal of Mechanics of Materials and Structures, 5 (3). pp. 507-528.

Jog, CS (2002) On the explicit determination of the polar decomposition in n-dimensional vector spaces. In: Journal of Elasticity, 66 (2). 159-169 .

Jog, CS (2013) An Outward-Wave-Favouring Finite Element-Based Strategy for Exterior Acoustical Problems. In: INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 18 (1). pp. 27-38.

Jog, CS (2002) Topology design of stpuctures subjected to periodic loading. In: Journal of Sound and vibration, 253 (3). pp. 687-709.

Jog, CS (2002) Topology design of structures using a dual algorithm and a constraint on the perimeter. In: International Journal for Numerical Methods in Engineering, 54 (7). pp. 1007-1019.

Jog, CS (2006) Topology design of three-dimensional structures using hybrid finite elements. In: IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials, Oct, 2005, Copenhagen, Denmark, pp. 33-42.

Jog, CS (2011) A finite element method for compressible viscous fluid flows. In: International Journal for Numerical Methods in Fluids, 66 (7). pp. 852-874.

Jog, CS (2008) A hybrid element formulation for the three-dimensional penalty finite element analysis of incompressible fluids. In: International Journal for Numerical Methods in Engineering, 73 (1). pp. 123-145.

Jog, CS (2001) A robust dual algorithm for topology design of structures in discrete variables. In: International Journal for Numerical Methods in Engineering, 50 (7). pp. 1607-1618.

Jog, CS and Agrawal, Manish and Nandy, Arup (2016) The time finite element as a robust general scheme for solving nonlinear dynamic equations including chaotic systems. In: APPLIED MATHEMATICS AND COMPUTATION, 279 . pp. 43-61.

Jog, CS and Agrawal, Manish and Nandy, Arup (2016) The time finite element as a robust general scheme for solving nonlinear dynamic equations including chaotic systems. In: APPLIED MATHEMATICS AND COMPUTATION, 279 . pp. 43-61.

Jog, CS and Annabattula, R (2005) The development of hybrid axisymmetric elements based on the Hellinger-Reissner variational principle. In: International Journal for Numerical Methods in Engineering .

Jog, CS and Cherukuri, HarishP (2014) A reexamination of some puzzling results in linearized elasticity. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 39 (1). pp. 139-147.

Jog, CS and Kelkar, PP (2006) Non-linear analysis of structures using high performance hybrid elements. In: International Journal for Numerical Methods in Engineering, 68 (4). pp. 473-501.

Jog, CS and Mokashi, Imrankhan Sherkhan (2014) A finite element method for the Saint-Venant torsion and bending problems for prismatic beams. In: COMPUTERS & STRUCTURES, 135 . pp. 62-72.

Jog, CS and Nandy, Arup (2015) Conservation Properties of the Trapezoidal Rule in Linear Time Domain Analysis of Acoustics and Structures. In: JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 137 (2).

Jog, CS and Nandy, Arup (2014) Mixed finite elements for electromagnetic analysis. In: COMPUTERS & MATHEMATICS WITH APPLICATIONS, 68 (8). pp. 887-902.

Jog, CS and Pal, RK (2011) A monolithic strategy for fluid-structure interaction problems. In: International Journal for Numerical Methods in Engineering, 85 (4). pp. 429-460.

Jog, CS and Patil, Kunal D (2013) Conditions for the onset of elastic and material instabilities in hyperelastic materials. In: Archives of Applied Mechanics, 83 (5). pp. 661-694.

Jog, CS and Patil, Kunal D (2016) A hybrid finite element strategy for the simulation of MEMS structures. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 106 (7). pp. 527-555.

Jog, CS and Potghan, N (2017) A finite element method for incompressible fluid flow in a noninertial frame of reference and a numerical study of circular couette flow with varying angular speed. In: Fluids, 2 (4).

Jog, CS and Sankarasubramanian, R and Abinandanan, TA (2000) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates. In: Journal of the Mechanics and Physics of Solids, 48 (11). pp. 2363-2389.

John, A and Edachery, V and Agilan, M and Rajendran, A and Mathiyalagan, S and Madhu, HC and Kailas, SV (2022) Influence of Sliding-Friction Induced Strain Hardening on the Tribological Behavior of Friction Stir Processed AA2219 Alloy. In: Tribology Online, 17 (1). pp. 9-18.

John, A and Showket, J and Joseph Babu, K and Edachery, V and Suvin, PS (2023) Micro-tribological Characteristics of Ti6Al4V Alloy Subjected to Shot Blasting Surface Treatment Process. In: Transactions of the Indian Institute of Metals .

Jorapur, Nikhil and Palaparthy, Vinay S and Sarik, Shahbaz and John, Jobish and Baghini, Maryam Shojaei and Ananthasuresh, GK (2015) A low-power, low-cost soil-moisture sensor using dual-probe heat-pulse technique. In: SENSORS AND ACTUATORS A-PHYSICAL, 233 . pp. 108-117.

Jose, M and Nagaraj, B and Seshan, S and Rohatgi, PK (1980) Extent of weight-reduction possible in automobiles. In: Journal of Scientific & Industrial Research (JSIR), 39 (8). pp. 434-440.

Joshi, A and Choudhury, S and Baghel, VS and Ghosh, S and Gupta, S and Lahiri, D and Ananthasuresh, GK and Chatterjee, K (2023) 4D Printed Programmable Shape-Morphing Hydrogels as Intraoperative Self-Folding Nerve Conduits for Sutureless Neurorrhaphy. In: Advanced Healthcare Materials .

Joshi, Dhananjay and Mahadevan, Pradeep and Marathe, Amol and Chatterjee, Anindya (2007) Unimportance of geometric nonlinearity in analysis of flanged joints with metal-to-metal contact. In: International Journal Of Pressure Vessels And Piping, 84 (7). pp. 405-411.

Joshi, K and Roy Chowdhury, A (2022) Bio-Inspired Vision and Gesture-Based Robot-Robot Interaction for Human-Cooperative Package Delivery. In: Frontiers in Robotics and AI, 9 .

Joshi, PR and Govardhan, RN (2006) Unsteady flow field downstream of a sudden expansion. In: Proceedings of the Eight National Conference on Air Breathing Engines and Aerospace Propulsion NCABE- 2006, December 12-14 2006, DIAT Pune.

Joshi, R and Arakeri, J (2024) Long-distance sinusoidal actuation in self-propelling apparatus: a novel spiral spring-based crank rocker mechanism. In: Sadhana - Academy Proceedings in Engineering Sciences, 49 (1).

Joshi, SG and Srinivasan, P (1978) Application of Laplace transform technique to the solution of certain third-order non-linear systems. In: Journal of Sound and Vibration, 57 (1). pp. 41-50.

Joshi, SG and Srinivasan, P (1977) Non-linear response of a gyrostabilized platform to transient input. In: Journal of Sound and Vibration, 54 (4). pp. 527-536.

Joshi, SG and Srinivasan, P (1978) The non-linear response of a gyrostabilized platform: Effects of correction torque time delay and of random inputs. In: Journal of Sound and Vibration, 57 (4). pp. 535-553.

Joshi, SG and Srinivasan, P (1978) The non-linear response of a gyrostabilized platform: Effects of correction torque time delay and of random inputs. In: Journal of Sound and Vibration, 57 (4). 535-553 .

Joshi, SG and Srinivasan, P (1978) The pulse response of non-linear third order systems. In: Journal of Sound and Vibration, 58 (1). pp. 109-115.

Joshi, SG and Srinivasan, P (1978) The pulse response of non-linear third order systems. In: Journal of Sound and Vibration, 58 (1). pp. 109-11.

Joshi, SG and Srirangarajan, HR and Srinivasan, P (1976) Stability of third-order systems. In: Journal of Sound and Vibration, 48 (4). pp. 578-581.

Joshi, VV (2020) Heat transfer characterization of test rooms with six different roofs. In: International Journal of Heat and Technology, 38 (1). pp. 131-136.

Joshi, VV (2021) Shade Net to Reduce Building Cooling Load: An Experimental Study with RCC and GI Sheet Roofs. In: 1st International Conference on Visionary Action Towards Liveable Urban Environments, VALUE 2020, 20-21 Feb 2020, Vellore; India, pp. 223-232.

Joshi, Y and Dutta, P and Schupp, PE and Espinosa, D (1997) Nonaxisymmetric convection in stationary Gas Tungsten Arc Weld Pools. In: Journal of Heat Transfer, 119 (1). pp. 164-172.

Judge, J and Pratap, R (1998) Asymptotic states of a bilinear hysteretic oscillator in a fully dissipative phase space. In: Journal of Sound and Vibration, 218 (3). pp. 548-557.

Jutur, P and Barman, D and Govardhan, RN (2022) Low Reynolds number stall flutter of a linear cascade with large amplitudes at low reduced frequencies: Unsteady loads and flow features. In: Journal of Fluids and Structures, 109 .

Jutur, P and Govardhan, RN (2017) Effect of pressure ratio on bending mode flutter in a transonic linear cascade. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore.

Jutur, P and Govardhan, RN (2019) Flutter in started and unstarted transonic linear cascades: Simultaneous measurements of unsteady loads and shock dynamics. In: Journal of Turbomachinery, 141 (12).

Jutur, Prahallada and Govardhan, Raghuraman N (2018) EFFECT OF PRESSURE RATIO ON BENDING MODE FLUTTER IN A TRANSONIC LINEAR CASCADE. In: 5th ASME Gas Turbine India Conference, DEC 07-08, 2017, Bangalore, INDIA.

K

K, RK and Sen, D (2020) Motion space analysis of objects in multiple point contacts with applications to form-closure and kinematic pairs. In: Mechanism and Machine Theory, 153 .

Kabi, P and Pal, R and Basu, S (2020) Moses Effect: Splitting a Sessile Droplet Using a Vapor-Mediated Marangoni Effect Leading to Designer Surface Patterns. In: Langmuir, 36 (5). pp. 1279-1287.

Kabi, P and Razdan, V and Roy, D and Bansal, L and Sahoo, S and Mukherjee, R and Chaudhuri, S and Basu, S (2021) Evaporation-induced alterations in oscillation and flow characteristics of a sessile droplet on a rose-mimetic surface. In: Soft Matter, 17 (6). pp. 1487-1496.

Kabi, Prasenjit and Basu, Saptarshi and Chaudhuri, Swetaprovo (2015) Deployment strategy for controlled morphologies in sessile, mixed colloidal droplets. In: RSC Advances, 5 (109). pp. 89586-89593.

Kabi, Prasenjit and Chattopadhyay, Bidyendu and Bhattacharyya, Soumyadip and Chaudhuri, Swetaprovo and Basu, Saptarshi (2018) Evaporation-Oscillation Driven Assembly: Microtailoring the Spatial Ordering of Particles in Sessile Droplets. In: LANGMUIR, 34 (42). pp. 12642-12652.

Kabi, Prasenjit and Chaudhuri, Swetaprovo and Basu, Saptarshi (2016) Insights into Drying of Noncircular Sessile Nanofluid Droplets toward Multiscale Surface Patterning Using a Wall-Less Confinement Architecture. In: LANGMUIR, 32 (42). pp. 10977-10986.

Kabi, Prasenjit and Chaudhuri, Swetaprovo and Basu, Saptarshi (2018) Micro to Nanoscale Engineering of Surface Precipitates Using Reconfigurable Contact Lines. In: LANGMUIR, 34 (5). pp. 2109-2120.

Kailas, SV (2003) A Study of the Strain Rate Microstructural Response and Wear of Metals. In: Journal of Materials Engineering and Performance, 12 (6). pp. 629-637.

Kailas, SV and Biswas, SK (1999) Sliding wear of copper against alumina. In: Journal of Tribology, 121 (4). 795-801 .

Kailas, SV and Biswas, SK (1997) Sliding wear of titanium. In: Transactions of the ASME: Journal of Tribology, 119 (1). pp. 31-35.

Kailas, SV and Horng, JH and Suvin, PS (2023) Bio-based lubricants and their environmental sustainability. [Book Chapter]

Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .

Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.

Kailas, Satish V (2008) Invited talk on Selection of Materials for Design, Momentum 2008. In: Momentum 2008,Thrissur.

Kailas, Satish V and Biswas, SK (1993) Material response to two-dimensional scratching by wedges. In: 9th International Conference on Wear of Materials, 13-16 April 1993, San Francisco, CA, USA, pp. 110-118.

Kailas, Satish V and Biswas, SK (1995) Strain rate response and its effect in plane strain abrasion of metals by a wedge. In: Wear, 184 (1). pp. 23-32.

Kailas, Satish V and Biswas, SK (1995) The role of strain rate response in plane strain abrasion of metals. In: Wear, 181 (part 2). pp. 648-657.

Kailas, Satish V and Kumar, K (2009) Friction Stir Welding. In: 2nd International Conference on Recent Advances in Material Processing technology, 2009, February, Kovilpatti.

Kailas, Satish V and Kumar, K (2008) Friction Stir Welding - A Solid State Welding Process. In: National conference on recent trends in mechanical engineering sciences, SSIT, Tumkur, Feb, SSIT, Tumkur.

Kailas, Satish V and Kumar, K (2008) Influence of tilt angle of plate on friction and transfer layer - a study of aluminium pin sliding against steel plate. In: International Conference on Materials for the Future (ICMF 2008), Thrissur, Jan., Thrissur.

Kailas, Satish V and Kumar, K (2007) Optimization of Friction Stir Welding Parameters study on Aluminium alloys. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvananthapuram.

Kailas, Satish V and Mannekote, Jagadeesh Kumar (2007) Value addition in Coconut- Testing and Characterization of biodegradable lubricant from coconut oil. In: The second International Coconut Summit. , 9-11 May 2007, Kochi.

Kailas, Satish V and Sengupta, AK and Kutty, TRG and Prashanth, GBN (2007) Design and Development of High Temperature (1873K) Micro-indenters - Vickers, Knoop and Berkovich. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kallapur, S and Dikshit, R and Dey, A and Nandi, A and Singh, V and Viswanathan, K and Kumar, A (2021) Microbial analysis in space: Modular device for biological experiments in microgravity. In: Acta Astronautica, 188 . pp. 473-478.

Kalyanaraman, D and Bapu, G and Ramesh, NK and Subramanian, R (1989) Wear behavior of nickel-titanium dioxide composite coating. In: Bulletin of Electrochemistry, 5 (9). pp. 700-702.

Kamath, RV and Ravi, MR and Marathe, AG (1992) Mixed convection heat transfer from the bottom tip of a cylinder spinning about a vertical axis in a saturated porous medium. In: International Journal of Heat and Mass Transfer, 35 (4). pp. 823-832.

Kamesh, D and Pandiyan, R and Ghosal, Ashitava (2012) Passive vibration isolation of reaction wheel disturbances using a low frequency flexible space platform. In: Journal of Sound and Vibration, 331 (6). pp. 1310-1330.

Kamesh, D and Pandiyan, R and Ghosal, Ashitava (2010) Modelling, Design and Analysis of Low Frequency Platform for Attenuating Micro-Vibration in Spacecraft. In: Journal of Sound and Vibration, 329 (17). pp. 3431-3450.

Kanagalasara, Vathsala and Saxena, Deepak and Biswas, Sanjay K (2012) Effect of Interfacial Microstructure of Adsorbed Poly(ethylene glycol) Monooleate on Steel Substrate on Sliding Friction in Oil in Water Emulsion. In: Journal of Physical Chemistry C, 116 (39). pp. 20830-20838.

Kar, A (2023) Mechanism of microstructure evolution and improved mechanical properties in two-pass friction stir welding of titanium to aluminum. In: Archives of Civil and Mechanical Engineering, 23 (4).

Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .

Kar, A and Kailas, SV and Suwas, S (2020) Formation sequence of intermetallics and kinetics of reaction layer growth during solid state reaction between titanium and aluminum. In: Materialia, 11 (100702).

Kar, A and Kailas, SV and Suwas, S (2020) Mechanism of variation in high-temperature grain stability of aluminum in dissimilar friction stir welds. In: Materials Performance and Characterization, 9 (2).

Kar, A and Kumar, S and Singh, K (2023) Mechanisms associated with material deformation, and microstructural evolution during friction stir welding of pure titanium and Al alloy. In: Science and Technology of Welding and Joining .

Kar, A and Singh, K and Kumar, L (2023) Effect of Tool Rotational Speed and Mechanisms Associated with Microstructure Evolution and Intermetallics Formation in Friction Stir Welding of Aluminum Alloy to Titanium Alloy. In: Journal of Materials Engineering and Performance .

Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .

Kar, Amlan and Choudhury, Sounak K and Suwas, Satyam and Kailas, Satish V (2018) Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium. In: MATERIALS CHARACTERIZATION, 145 . pp. 402-412.

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1533-1536.

Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2018) Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (11). pp. 6016-6026.

Kar, Amlan and Suwas, Satyam and Kailas, Satish (2018) Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 733 . pp. 199-210.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.

Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100 (1-4). pp. 435-443.

Kar, T and Munjal, ML (2005) Generalized analysis of a muffler with any number of interacting ducts. In: Journal of Sound And Vibration, 285 (3). pp. 585-596.

Kar, T and Munjal, ML (2006) Plane wave analysis of acoustic wedges using the boundary-condition-transfer algorithm. In: Applied Acoustics, 67 (9). pp. 901-917.

Kar, T and Munjal, ML (2005) An inherently stable boundary-condition-transfer algorithm for muffler analysis. In: Journal of the Acoustical Society of America, 118 (1). pp. 60-71.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Modeling of growth and motion of equiaxed dendrites in a convecting melt. In: 2010 3rd International Conference on Thermal Issues in Emerging Technologies Theory and Applications (ThETA), 19-22 Dec. 2010, Cairo, Egypt.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Study of dendrite growth in a rotational flow field. In: 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, Indian Institute of Technology Madras, Chennai, India.

Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2012) A coupled VOF-IBM-enthalpy approach for modeling motion and growth of equiaxed dendrites in a solidifying melt. In: JOURNAL OF COMPUTATIONAL PHYSICS, 231 (10). pp. 3987-4000.

Karagadde, Shyamprasad and Dutta, Pradip (2016) A comparison of time-scales governing the interaction and growth of hydrogen bubbles with a solidifying front. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 79 . pp. 16-20.

Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2009) Modeling growth of hydrogen bubbles in aluminum castings using the level-set method. In: Scripta Materialia, 61 (2). pp. 216-219.

Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2012) A model for growth and engulfment of gas microporosity during aluminum alloy solidification process. In: COMPUTATIONAL MATERIALS SCIENCE, 65 . pp. 383-394.

Karanam, Venkata M and Ghosal, Ashitava (2013) Studies on the wobble mode stability of a three-wheeled vehicle. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 227 (8). pp. 1200-1209.

Karanam, Venkata Mangaraju and Chatterjee, Anindya (2011) Common underlying steering curves for motorcycles in steady turns. In: Vehicle System Dynamics, 49 (6). pp. 931-948.

Karanam, Venkata Mangaraju and Chatterjee, Anindya (2008) Some procedural details of analysis using ADAMS-Motorcycle. [Preprint] (Unpublished)

Karanam, Venkata Mangaraju and Chatterjee, Anindya and Ghosal, Ashitava (2011) Procedural aspects of modeling the dynamics of a three wheeled vehicle using ADAMS-CAR. [Preprint] (Unpublished)

Karki, KC and Arakeri, VH (1982) Analysis of EXCOBULLE two-phase expansion tests. In: Nuclear Engineering and Design, 72 (2). p. 271.

Karmarkar, A and Tyagi, A and Hemchandra, S and O'Connor, J (2021) Impact of turbulence on the coherent flame dynamics in a bluff-body stabilized flame. In: Proceedings of the Combustion Institute, 38 (2). pp. 3067-3075.

Karupannasamy, DK and Kailas, SV and Shankar, S and Sasikumar, KSK (2022) A Predictive Model for Galling Phenomenon and Its Applicability for Deep Drawing Processes. In: Journal of Tribology, 144 (1).

Kashyap, PV and Duguet, Y and Dauchot, O (2022) Linear Instability of Turbulent Channel Flow. In: Physical Review Letters, 129 (24).

Kashyap, PV and Duguet, Y and Dauchot, O (2024) Linear stability of turbulent channel flow with one-point closure. In: Physical Review Fluids, 9 (6).

Kashyap, SR and Pramanik, S and Ravikrishna, RV (2024) A review of energy-efficient domestic cookstoves. In: Applied Thermal Engineering, 236 .

Kashyap, SR and Pramanik, S and Ravikrishna, RV (2023) A review of solar, electric and hybrid cookstoves. In: Renewable and Sustainable Energy Reviews, 188 .

Kathuriya, ML and Munjal, ML (1979) Experimental evaluation of the aeroacoustic characteristics of a source of pulsating gas flow. In: Journal of the Acoustical Society of America, 65 (1). pp. 240-248.

Kathuriya, ML and Munjal, ML (1977) Measurement of the acoustical impedance of a black box at low frequencies using a shorter impedance tube. In: Journal of the Acoustical Society of America, 62 (3). pp. 751-754.

Kathuriya, ML and Munjal, ML (1977) Method for evaluation of the acoustical impedance of a black box, with or without mean flow, measuring pressures at fixed positions. In: Journal of the Acoustical Society of America, 62 (3). pp. 755-759.

Kathuriya, ML and Munjal, ML (1975) An accurate method for the experimental evaluation of the acoustical impedance of a black box. In: Journal of the Acoustical Society of America, 58 (2). pp. 451-454.

Kathuriya, ML and Munjal, ML (1976) A method for the experimental evaluation of the acoustic characteristics of an engine exhaust system in the presence of mean flow. In: Journal of the Acoustical Society of America, 60 (3). 745-751.

Kattakayam, TA and Srinivasan, K (1997) Electrical characterisation of domestic refrigeration compressors. In: IEE Proceedings of Science, Measurement and Technology, 144 (3). 123 -126.

Kattakayam, TA and Srinivasan, K (1999) Robust controller for an autonomous small refrigeration unit. In: IEE Proceedings - Science, Measurement and Technology, 146 (3). pp. 159-163.

Kattakayam, Thomachan A and Khan, Sumanta and Srinivasan, Kandadai (1996) Diurnal and environmental characterization of solar photovoltaic panels using a PC-AT add on plug in card. In: Solar Energy Materials and Solar Cells, 44 (1). pp. 25-36.

Kattakayam, Thomachan A and Srinivasan, K (1997) Experimental Investigation on a Series-Parallel Cluster of Photovoltaic Panels. In: Solar Energy, 61 (4). pp. 231-240.

Kattakayam, Thomachan A and Srinivasan, K (2004) Lead acid batteries in solar refrigeration systems. In: Renewable Energy, 29 (8). pp. 1243-1250.

Kattakayam, Thomachan A and Srinivasan, K (1996) Photovoltaic Panel-Generator Based Autonomous Power Source For Small Refrigeration Units. In: Solar Energy, 56 (6). pp. 543-552.

Kattakayam, Thomachan A and Srinivasan, K (2000) Thermal performance characterization of a photovoltaic driven domestic refrigerator. In: International Journal of Refrigeration, 23 (3). pp. 190-196.

Kattakayam, Thomachan A and Srinivasan, K (1998) Uninterrupted power supply for autonomous small refrigerators. In: Energy Conversion and Management, 39 (1-2). pp. 21-26.

Kaur, Malhi Charanjeet and Pratap, Rudra and Bhat, Navakanta (2009) Design of a high sensitivity FET integrated MEMS microphone. In: 23rd Eurosensors Conference, SEP 06-09, 2009, Lausanne, pp. 875-878.

Kaushal, S and Rajput, AS and Bhattacharya, S and Vidyasagar, M and Kumar, A and Prakash, MK and Ansumali, S (2020) Estimating the herd immunity threshold by accounting for the hidden asymptomatics using a COVID-19 specific model. In: PLoS ONE, 15 (12).

Kaushik, V and Narasimhan, R and Mishra, RK (2014) Experimental study of fracture behavior of magnesium single crystals. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 590 . pp. 174-185.

Kaushik, V and Narasimhan, R and Mishra, Raja K (2014) Finite element simulations of notch tip fields in magnesium single crystals. In: INTERNATIONAL JOURNAL OF FRACTURE, 189 (2). pp. 195-216.

Kavanur Ramesh, SK and Subramanya, J and Kumar, G and Kailas, SV and Mudalagi, S (2024) Optimization of Process Parameters in Friction Stir Processing for the Development of Polymer-Derived Aluminum Matrix Composites. In: 21st ISME International conference on Advances in Mechanical Engineering, ISME 2023, 13 July 2023through 15 July 2023, Bengaluru, pp. 71-79.

Kaypee, Stephanie and Sudarshan, Deepthi and Shanmugam, Muthu K and Mukherjee, Debanjan and Sethi, Gautam and Kundu, Tapas K (2016) Aberrant lysine acetylation in tumorigenesis: Implications in the development of therapeutics. In: PHARMACOLOGY & THERAPEUTICS, 162 . pp. 98-119.

Kazemi, Amir AD and Murthy, Srinivas M and Raju, Govinda N (1989) Stress intensity factor determination of radially cracked circular rings subjected to tension using photoelastic technique. In: Engineering Fracture Mechanics, 32 (3). 403 -408.

Keshavan, J (2022) Finite-Time Formation Convergence of Vision-Based Nonholonomic Systems Without Explicit Communication. In: 6th IFToMM Asian Mechanisms and Machine Science Conference, Asian MMS 2021, 15-18 Dec 2021, Virtual, Online, pp. 443-454.

Keshavan, J (2023) A novel concurrent learning-based sliding-mode observer for second-order multivariable systems with a time-varying coefficient: An application to machine vision. In: International Journal of Robust and Nonlinear Control .

Keshavan, J and Belgaonkar, S and Murali, S (2023) Adaptive Control of a Constrained First Order Sliding Mode for Visual Formation Convergence Applications. In: IEEE Access, 11 . pp. 112263-112275.

Keshavan, SY and Srinath, LS (1978) An approximate mathematical procedure for the determination of characteristic parameters for a general case in three dimensional photoelasticity. In: Mechanics Research Communications, 5 (1). pp. 1-7.

Khan, RH and Mahadeva, NS and Seshadri, MR (1973) Some Studies On Flowability Of Molding Sand. In: Journal of the Indian Institute of Science, 54 (4). pp. 194-210.

Khan, S and Bhat, Thejas N and Ananthasuresh, GK (2009) Design and Characterization of a Micromachined Accelerometer with a Mechanical Amplifier for Intrusion Detection. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials, Oct. 14-16, 2009, Kolkatta.

Khan, Sambuddha and Ananthasuresh, GK (2014) Improving the Sensitivity and Bandwidth of In-Plane Capacitive Microaccelerometers Using Compliant Mechanical Amplifiers. In: JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 23 (4). pp. 871-887.

Khan, Sambuddha and Ananthasuresh, GK (2014) A MICROMACHINED WIDE-BAND IN-PLANE SINGLE-AXIS CAPACITIVE ACCELEROMETER WITH A DISPLACEMENT-AMPLIFYING COMPLIANT MECHANISM. In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 42 (3). pp. 355-370.

Khan, Sambuddha and Prasanna, Deepa and Ananthasuresh, GK (2012) Compact in-plane dual-axis spring-steel accelerometer. In: 5th ISSS National Conference on MEMS, Smart Materials, Structures and Systems, September 21-22, 2012, Coimbatore, India.

Khan, Sumanta and Srinivasan, K (1996) Inter-related p–T and $\rho-T$ equations for saturated fluid phases:application to R-134a. In: Journal of Physics D: Applied Physics, 29 (12). pp. 3079-3088.

Khandelwal, Pranav C and Agrawal, Suchi S and Namboothiry, Manoj AG and Gundiah, Namrata (2014) Fabrication of a novel biomaterial with enhanced mechanical and conducting properties. In: JOURNAL OF MATERIALS CHEMISTRY B, 2 (42). pp. 7327-7333.

Khanna, SK and Srinivasan, K (1996) Saturated liquid viscosity correlations for alternative refrigerants. In: International Journal of Thermophysics, 17 (2). 361-372 .

Khatri, OP and Devaprakasam, D and Biswas, SK (2005) Frictional Responses of Octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, 2H-Perfluorooctyltrichlorosilane (FOTS) Monolayers Self-assembled on Aluminium over Six Orders of Contact Length Scale. In: Tribology Letters, 20 (3&4). pp. 235-246.

Khatri, OP and Biswas, SK (2006) Boundary lubrication capabilities of alkylsilane monolayer self-assembled on aluminium as investigated using FTIR spectroscopy and nanotribometry. In: Surface Science, 600 (18). pp. 4399-4404.

Khatri, Om P and Biswas, Sanjay K (2007) Friction of Octadecyltrichlorosilane Monolayer Self-Assembled on Silicon Wafer in 0% Relative Humidity. In: Journal of Physical Chemistry C, 111 (6). pp. 2696-2701.

Khatri, Om P and Biswas, Sanjay K (2008) Load Induced Microstructure Evolution and Friction in an Organic Monolayer Self-assembled on a Silicon Substrate. In: Tribology Letters, 32 (3). pp. 179-188.

Khatri, Om P and Math, Souvik and Bain, Colin D and Biswas, Sanjay K (2007) Frictional Response of a Silane Monolayer to Sliding in a Humid Environment. In: Journal of Physical Chemistry C, 111 (44). pp. 16339-16344.

Khatri, Prakash Om and Biswas, SK (2004) Thermal stability of octadecyltrichlorosilane self-assembled on a polycrystalline aluminium surface. In: Surface Science, 572 (2-3). pp. 228-238.

Khatua, V and Gurumoorthy, B and Ananthasuresh, GK (2024) A vat photopolymerization process for structures reinforced with spatially steered flexible fibers. In: Additive Manufacturing, 86 .

Khivsara, S and Dutta, P and Ortega, J and Christian, J and Ho, C (2018) Computational modeling of a high temperature bladed solar receiver with air as the heat transfer fluid. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 675-679.

Khivsara, S and Reddy, MUM and Reddy, KPJ and Dutta, P (2019) Measurement of radiation heat transfer in supercritical carbon dioxide medium. In: Measurement: Journal of the International Measurement Confederation, 139 . pp. 40-48.

Khivsara, S and Reddy, MUM and Reddy, KPJ and Dutta, P (2019) Measurement of radiation heat transfer in supercritical carbon dioxide medium. In: Measurement: Journal of the International Measurement Confederation, 139 . pp. 40-48.

Khivsara, Sagar D and Srinivasan, Vinod and Dutta, Pradip (2016) Radiative heating of supercritical carbon dioxide flowing through tubes. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 871-877.

Kishore, K and PaiVerneker, VR (1979) Mechanism of ageing of composite solid propellants. In: Combustion and Flame, 36 (1). pp. 79-85.

Kishore, K and Sunitha, MR (1979) Effect of Transition Metal Oxides on Decomposition and Deflagration of Composite Solid Propellant Systems: A Survey. In: AIAA Journal, 17 (10). pp. 1118-1125.

Kishore Kumar, C and Anand, J and Ganesan, S and Govardhan, RN (2023) DESIGN OF A FACILITY FOR TESTING CENTRIFUGAL COMPRESSORS. In: ASME 2023 Gas Turbine India Conference, GTINDIA 2023, December 2023 through 8 December 2023, Bangalore.

Koh, SK and Ananthasuresh, GK and Croke, C (2005) A Quadratic Programming Formulation for the Design of Reduced Protein Models in Continuous Sequence Space. In: Journal of Mechanical Design, 127 (4). pp. 728-735.

Koh, Sung K and Ananthasuresh, GK and Vishveshwara , S (2005) A Deterministic Optimization Approach to Protein Sequence Design Using Continuous Models. In: The International Journal of Robotics , 24 (2-3). pp. 109-130.

Koh, Sung K and Chirikjian, Gregory S and Ananthasuresh, GK (2009) A Jacobian-Based Algorithm for Planning Attitude Maneuvers Using Forward and Reverse Rotations. In: Journal of Computational and Nonlinear Dynamics, 4 (1). 011012-1.

Kohli, S and Srinivasan, J and Mukunda, HS (1993) Heat transfer to a horizontal disc using a buoyancy-induced jet. In: International Journal of Heat and Mass Transfer, 36 (16). pp. 4049-4066.

Koiesa, R S and Joshi, K R and Ancuithasuresh, G K and Sen, P (2018) A NOVEL HIGH THROUGHPUT MICROFLUIDIC CELL TRANSIT ANALYZER USING AIR LIQUID INTERFACE AS LOCALIZED PRESSURE SENSOR. In: 31st IEEE International Conference on Micro Electro Mechanical Systems (MEMS), JAN 21-25, 2018, Belfast, NORTH IRELAND, pp. 133-136.

Koley, Ishita and Kundu, Sukumar and Kailas, Satish (2019) Friction stir welding of ultra low carbon steel: microstructure, mechanical properties and electrochemical study. In: METALLURGICAL RESEARCH & TECHNOLOGY, 116 (1).

Kollimada, S and Agrawal, V and Gundiah, N (2012) Adhesion and migration response of breast cancer cells to varying substrate stiffness. In: International Conference on Angiogenesis : Basics and Applications, 1-3 March , 2012, Chennai, Tamilnadu, India.

Kollimada, Somanna and Balakrishnan, Sreenath and Malhi, Charanjeet K and Raju, Shilpa R and Suma, MS and Das, Saumitra and Ananthasuresh, GK (2017) A micro-mechanical device for in-situ stretching of single cells cultured on it. In: Journal of Micro-Bio Robotics, 13 (1-4). pp. 27-37. ISSN 2194-6418

Kollimada, Somanna A and Khan, Sambuddha and Balakrishna, Sreenath and Raju, Shilpa and Matad, Suma and Ananthasuresh, GK (2017) A micro-mechanical compliant device for individual cell-stretching, compression, and in-situ force-measurement. In: 1st International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017, 17-21 July 2017, Montreal, QC, Canada, pp. 1-6.

Kollimada, Somanna A and Kulkarni, Ankur H and Ravan, Aniket and Gundiah, Namrata (2016) Advancing Edge Speeds of Epithelial Monolayers Depend on Their Initial Confining Geometry. In: PLOS ONE, 11 (4).

Korpela, Seppo A (2006) Oil depletion in the world. In: Current Science, 91 (9). pp. 1148-1152.

Kotesa, R S and Rattan, K and Ananthasuresh, G K and Sen, P (2018) Real Time Measurement of Deformability Index for Electro-Mechanodiagnostics. In: Proceedings of the 13th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 22-26 April, 2018, Singapore, pp. 189-192.

Kowshik, SA and Shridhar, S and Treleaven, NCW (2021) Towards reduced order models of small-scale acoustically significant components in gas turbine combustion chambers. In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, 7-11 jun 2021.

Kranthi, JK and Jacob, S and Karunanithi, R and Narasimham, G (2019) Study of staging method for a 25 K two stage pulse tube cooler. In: 27th International Cryogenics Engineering Conference and International Cryogenic Materials Conference 2018, ICEC-ICMC 2018, 3 - 7 September 2018, Oxford.

Kranthi Kumar, J and Jacob, S and Karunanithi, R and Narasimham, G (2019) Design and component development of a 17 l/d liquefier for helium recondensation. In: 27th International Cryogenics Engineering Conference and International Cryogenic Materials Conference 2018, ICEC-ICMC 2018, 3 - 7 September 2018, Oxford.

Kranthi Kumar, J and Jacob, S and Karunanithi, R and Narasimham, G S V L (2017) Studies on the development and efficiency improvement of a 1.5 W at 25 K two stage pulse tube cooler. In: 26th International Cryogenic Engineering Conference / International Cryogenic Materials Conference, MAR 07-11, 2016, Indian Cryogen Council, New Delhi, INDIA.

Krien, Y and Testut, L and Islam, A K M S and Bertin, X and Durand, F and Mayet, C and Tazkia, A R and Becker, M and Calmant, S and Papa, F and Ballu, V and Shum, C K and Khan, Z H (2017) Towards improved storm surge models in the northern Bay of Bengal. In: CONTINENTAL SHELF RESEARCH, 135 . pp. 58-73.

Krishan, B and Gupta, D and Vadlamudi, G and Sharma, S and Chakravortty, D and Basu, S (2021) Efficacy of homemade face masks against human coughs: Insights on penetration, atomization, and aerosolization of cough droplets. In: Physics of Fluids, 33 (9).

Krishna, Hara and Pratap, Rudra (2009) Elasticity Effects of the Biomolecule in the Mass Detection Using Resonance of a MEMS Cantilever. In: International Conference on MEMS (ICMEMS 2009), January 3-5, 2009, IIT Madras.

Krishna, KRama and Vipin, JS and Sen, Dibakar (2019) Two-Point Grasp Response. In: MACHINES, MECHANISM AND ROBOTICS . pp. 795-805.

Krishna, R and Jayanth, GR (2024) A magnetic-actuator based planar nano-positioning system. In: 7th International Conference on Manipulation, Automation, and Robotics at Small Scales, MARSS 2024, 1 July 2024 through 5 July 2024, Delft.

Krishna, Rama K and Sen, Dibakar (2019) Second-order total freedom analysis of 3D objects in a single point contact. In: MECHANISM AND MACHINE THEORY, 140 . pp. 10-30.

Krishna, S and Ravikrishna, RV (2017) Numerical and Experimental Studies on a Syngas-Fired Ultra Low NOx Combustor. In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 139 (11).

Krishna, S and Ravikrishna, RV (2015) Optical diagnostics of fuel-air mixing and vortex formation in a cavity combustor. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 61 . pp. 163-176.

Krishna, S and Ravikrishna, RV (2015) QUANTITATIVE OH PLANAR LASER INDUCED FLUORESCENCE DIAGNOSTICS OF SYNGAS AND METHANE COMBUSTION IN A CAVITY COMBUSTOR. In: COMBUSTION SCIENCE AND TECHNOLOGY, 187 (11). pp. 1661-1682.

Krishna, Vamsi C and Gundiah, Namrata and Arakeri, Jaywant H (2017) Separations and secondary structures due to unsteady flow in a curved pipe. In: JOURNAL OF FLUID MECHANICS, 815 . pp. 26-59.

Krishna, Y and Shrinivasa, U (2009) Semi-active vibration isolation using a near-zero-spring-rate device:steady state analysis of a single-degree-of-freedom model. In: Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 223 (D11). pp. 1395-1403.

Krishnamurthy, MV and Chandra, Rajneesh and Jacob, S and Kasthurirengan, S and Karunanithi, R (1996) Experimental studies on cool-down and mass flow characteristics of a demountable liquid nitrogen transfer line. In: Cryogenics, 36 (6). pp. 435-441.

Krishnan, BP and Raman, N and Narayanaswamy, K and Rohatgi, PK (1981) Mechanism of improvement in oil spreadability of aluminium alloy-graphite particle composites. In: Tribology International, 14 (5). pp. 301-305.

Krishnan, BP and Raman, N and Narayanaswamy, K and Rohatgi, PK (1980) Performance of an Al-Si-graphite particle composite piston in a diesel engine. In: Wear, 60 (1). pp. 205-215.

Krishnan, G and Ananthasuresh, GK (2006) An Objective Evaluation of Displacement-Amplifying Compliant Mechanisms for Sensor Applications. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Krishnan, Girish and Ananthasuresh, GK (2008) Evaluation and Design of Displacement-Amplifying Compliant Mechanisms for Sensor Applications. In: Journal Of Mechanical Design, 130 (10). 2304-1-9.

Krishnan, R and Das, A and Gurumoorthy, B (1996) Octree Encoding of B-rep Based Objects. In: Computers & Graphics, 20 (1). pp. 107-114.

Krishnaprakas, CK and Narayana, KB and Dutta, P (1999) Combined convective and radiative heat transfer in turbulent tube flow. In: Journal Of Thermophysics And Heat Transfer, 13 (3). pp. 390-394.

Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (2000) Heat transfer correlations for multilayer insulation systems. In: Cryogenics, 40 (07). pp. 431-435.

Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (1999) Interaction of radiation with natural convection. In: Journal of Thermophysics, 13 (3). pp. 387-390.

Krishnaprakas, CK and Narayana, KB and Dutta, P (2000) Radiation in boundary layer flow of an absorbing, emitting and anisotropically scattering fluid. In: International Journal of Numerical Methods For Heat & Fluid, 10 (5-6). pp. 530-540.

Krishnaprakas, K and Narayana, Badari K and Dutta, Pradip (2001) Combined Conduction And Radiation Heat Transfer In A Gray Anisotropically Scattering Planar Medium With Diffuse-pecular Boundaries. In: International Communications in Heat and Mass Transfer, 28 (1). pp. 77-86.

Krsmanovic, M and Biswas, D and Ali, H and Kumar, A and Ghosh, R and Dickerson, AK (2021) Hydrodynamics and surface properties influence biofilm proliferation. In: Advances in Colloid and Interface Science, 288 .

Kulkarni, Ankur H and Ghosh, Prasenjit and Seetharaman, Ashwin and Kondaiah, Paturu and Gundiah, Namrata (2018) Traction cytometry: regularization in the Fourier approach and comparisons with finite element method. In: SOFT MATTER, 14 (23). pp. 4687-4695.

Kulkarni, Salil S and Pratap, Rudra (2000) Studies on the dynamics of a supercavitating projectile. In: Applied Mathematical Modelling, 24 (2). pp. 113-129.

Kulkarni, Sandip D and Chakravarthy, Shanthanu and Minor, Mark A and Pardyjak, Eric R and Hollerbach, John M (2012) Control of a Duct Flow Network for Wind Display in a Virtual Environment. In: IEEE-ASME TRANSACTIONS ON MECHATRONICS, 17 (6). pp. 1021-1030.

Kulkarni, Sandip D and Fisher, Charles J and Lefler, Price and Desai, Aditya and Chakravarthy, Shanthanu and Pardyjak, Eric R and Minor, Mark A and Hollerbach, John M (2015) A Full Body Steerable Wind Display for a Locomotion Interface. In: IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, 21 (10). pp. 1146-1159.

Kulkarni Jatkar, SK and Gajendragad, NG (1937) Vapor Phase Esterification Equilibria. In: Journal of the American Chemical Society, 59 (5). pp. 798-800.

Kumar, Arvind and Dutta, Pradip and Sundarraj, Suresh and Walker, Mike J (2007) Remelting of Solid and its Effect on Macrosegregation During Solidification. In: Numerical Heat Transfer, Part A: Applications, 51 (1). pp. 59-83.

Kumar, K and Kalyan, C and Kailas, Satish V and Srivatsan, TS (2009) An Investigation of Friction During Friction Stir Welding of Metallic Materials. In: Materials And Manufacturing Processes, 24 (4). pp. 438-445.

Kumar, P and Lakshmi, H and Dutta, P (2008) Solidification of A356 Alloy in a Linear Electromagnetic Stirrer. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen and Germany, pp. 563-568.

Kumar, A and Babu, TVJG and Anand, SVR (1995) Queuing strategies for qos management of traffic between lans interconnected by low-speed wan links. In: Internetworking: Research and Experience, 6 (1). pp. 15-40.

Kumar, A and Basu, S (2023) Fluid–fluid and fluid–soft matter interaction. In: European Physical Journal: Special Topics, 232 (6). pp. 715-717.

Kumar, A and Dutta, P (2008) Numerical Analysis of Columnar-to-Equiaxed Transition in Directionally Solidified Sn-Pb and Al-Cu Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, A and Dutta, P (2008) Transport of Solid Crystals during Solidification of Ternary Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, A and Dutta, P (2006) Transport of Solid Crystals during Solidification of a Binary Alloy. In: International Conference on Advances in Materials and Materials Processing, Feb 4-5 2006, IIT Kharagpur.

Kumar, A and Dutta, Pradip (2006) Effect of Electromagnetic Stirring on Macrosegregation during Solidification of a Binary Alloy. In: 13th International heat Transfer Conference, August 13-18 2006, Sydney, Australia.

Kumar, A and Handral, P and Bhandari, D and Rangarajan, R (2021) More views of a one-sided surface: Mechanical models and stereo vision techniques for Möbius strips. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2250).

Kumar, A and Handral, P and Bhandari, D and Rangarajan, R (2021) More views of a one-sided surface: Mechanical models and stereo vision techniques for Möbius strips. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2250).

Kumar, A and Palani, IA and Yadav, M (2024) Comprehensive study of microstructure, phase transformations, and mechanical properties of nitinol alloys made of shape memory and superelastic wires and a novel approach to manufacture Belleville spring using wire arc additive manufacturing. In: Materials Today Communications, 38 .

Kumar, A and Rehman, NMA and Giri, P and Shukla, RK (2021) An asymptotic theory for the high-Reynolds-number flow past a shear-free circular cylinder. In: Journal of Fluid Mechanics, 920 .

Kumar, Ajay P and Madhu, H C and Pariyar, Abhishek and Perugu, Chandra S and Kailas, Satish V and Garg, Uma and Rohatgi, Pradeep (2020) Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 769 .

Kumar, Ajay P and Raj, Rishi and Kailas, Satish V (2015) A novel in-situ polymer derived nano ceramic MMC by friction stir processing. In: MATERIALS & DESIGN, 85 . pp. 626-634.

Kumar, Ajay P and Yadav, Devinder and Perugu, Chandra S and Kailas, Satish V (2017) Influence of particulate reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. In: MATERIALS & DESIGN, 113 . pp. 99-108.

Kumar, Arvind and Dutta, Pradip (2005) Modeling of transport phenomena in continuous casting of non-dendritic billets. In: International Journal of Heat and Mass Transfer, 48 (17). pp. 3674-3688.

Kumar, Arvind and Dutta, Pradip (2006) Modelling of Heat, Mass, Energy and Solute Transport during Solidification of Ternary Alloys. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Kumar, Arvind and Dutta, Pradip (2009) Numerical studies on columnar-to-equiaxed transition in directional solidification of binary alloys. In: Journal Of Materials Science, 44 (15). pp. 3952-3961.

Kumar, Arvind and Dutta, Pradip (2008) A Rayleigh number based dendrite fragmentation criterion for detachment of solid crystals during solidification. In: Journal of Physics D-Applied Physics, 41 (15). p. 155501.

Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I-Experimental Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 825-836.

Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part II-Numerical Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 783-799.

Kumar, D and Harmain, GA and Gaurav, G and Lijesh, KP and Kuriachen, B and Hirani, H and Philip, JT (2022) A Novel Seal Design to Enhance MR Brake Performance. In: Transactions of the Indian Institute of Metals .

Kumar, Deepak and Biswas, Sanjay K (2010) Contribution of different physical forces to the disjoining pressure of a thin water film being pressed by an oil droplet. In: Journal of Colloid and Interface Science, 348 (1). pp. 255-264.

Kumar, Deepak and Biswas, Sanjay K (2011) Effect of surfactant dispersed in oil on interaction force between an oil film and a steel substrate in water. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 377 (1-3). pp. 195-204.

Kumar, Deepak and Biswas, Sanjay K (2010) Replacement of water on a steel substrate by a surrounding oil reservoir. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 356 (1-3). pp. 112-119.

Kumar, Deepak and Biswas, Sanjay Kumar (2008) Microscopic Frictional Response of Sodium Oleate Self-Assembled on Steel. In: Tribology Letters, 30 (3). pp. 199-204.

Kumar, Deepak and Daniel, Jency and Biswas, SK (2010) Tribology of steel/steel interaction in oil-in-water emulsion: a rationale for lubricity (vol 345, pg 307, 2010). In: Journal of Colloid and Interface Science, 351 (2). p. 584.

Kumar, Deepak and Daniel, Jency and Biswasa, SK (2010) Tribology of steel/steel interaction in oil-in-water mulsion; a rationale for lubricity. In: Journal of Colloid and Interface Science, 345 (2). pp. 307-315.

Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.

Kumar, K and Gupta, HK and Kumar, P (2020) Analysis of a hybrid transcritical CO2 vapor compression and vapor ejector refrigeration system. In: Applied Thermal Engineering, 181 .

Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.

Kumar, K and Kailas, Satish V (2008) Friction in Friction Stir Welding. In: International Conference on Industrial Tribology, New Delhi, November, New Delhi.

Kumar, K and Kailas, Satish V (2008) Influence of welding parameters on the weld formation and modeling of FSW. In: Workshop on Friction Stir Welding and Surfacing of Materials, Golden Jubilee Celebrations of DRDO, DMRL, Hyderabad, March, Hyderabad.

Kumar, K and Kailas, Satish V (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. In: Materials & Design, 29 (4). 791 -797.

Kumar, K and Kailas, Satish V (2007) Optimization of friction stir welding parameters for AA6061-T6. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kumar, K and Kailas, Satish V (2008) Optimization of friction stir welding parameters for precipitation hardenable aluminum alloys 7020 and 6061. In: International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers, February 6-8, Chennai, February 6-8, Chennai.

Kumar, K and Kailas, Satish V (2007) Optimization of friction-stir welding parameters for a precipitation hardenable aluminum alloy. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2007) Production of bulk-nano materials by friction-stir processing. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2008) An experimental analysis on a friction stir welding defect (joint-line-remnant). In: Presented at the Symposium on Joining of Materials (SOJOM), Tiruchirappalli, December, Tiruchirappalli.

Kumar, K and Kailas, Satish V (2006) An investigation on friction in stir welding. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on the mechanism of friction-stir weld formation and tool design. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis, Dec 18-20 2006, IISc, Bangalore.

Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.

Kumar, K and Kumar, P (2019) Analysis of Propane + CO2 mixture as a working fluid in a vapor compression refrigeration system. In: 8th Conference on Ammonia and CO2 Refrigeration Technologies, Ohrid 2019, 11 - 13 April 2019, Ohrid, pp. 319-326.

Kumar, K M and Munjal, M L (2018) Direct estimation and experimental validation of the acoustic source characteristics of two-cylinder naturally aspirated diesel engine exhaust system. In: APPLIED ACOUSTICS, 135 . pp. 70-84.

Kumar, K M and Munjal, M L (2018) On development of rational design guidelines for large side-inlet side-outlet perforated element mufflers. In: NOISE CONTROL ENGINEERING JOURNAL, 66 (4). pp. 308-323.

Kumar, K S Anil and Murigendrappa, S M and Kumar, Hemantha and Shekhar, Himanshu (2018) Effect of Tool Rotation Speed on Microstructure and Tensile Properties of FSW Joints of 2024-T351 and 7075-T651 Reinforced With SiC Nano Particle: The Role of FSW Single Pass. In: 1st International Conference on Design, Materials and Manufacture (ICDEM), JAN 29-31, 2018, Surathkal, INDIA.

Kumar, KES and Rakshit, S (2022) Optimization based synthesis of pelvic structure for loads in running gait cycle. In: Sadhana - Academy Proceedings in Engineering Sciences, 47 (3).

Kumar, KES and Raveendranath, K and Sekhar, S and Ananthasuresh, GK (2023) A Comparison of Ring and Disk Resonator Gyroscopes Based on Their Degenerate Eigenmode Shapes. In: Mechanisms and Machine Science, 2 - 4 December 2022, Hyderabad, pp. 152-161.

Kumar, KG and Pavithran, C and Rohatgi, PK (1981) Recovery of Tartrate from Electroless Copper Baths. In: Plating and Surface Finishing, 68 (7). pp. 70-71.

Kumar, KM and Gaonkar, CD and Munjal, ML (2022) Double-tuning and experimental validation of rotated-offset inlet-outlet circular chamber muffler. In: Applied Acoustics, 197 .

Kumar, KM and Munjal, ML (2019) Direct estimation and experimental validation of the acoustic source characteristics of turbocharged diesel engine exhaust system. In: APPLIED ACOUSTICS, 149 . pp. 171-180.

Kumar, KM and Munjal, ML (2017) On the crucial role of mean flow in the design of multiply-connected coaxial perforated element mufflers. In: NOISE CONTROL ENGINEERING JOURNAL, 65 (5). pp. 462-481.

Kumar, KM and Munjal, ML (2017) A simple novel method for direct evaluation of the acoustic source impedance of the exhaust system of a single cylinder engine. In: 24th International Congress on Sound and Vibration, ICSV 2017, 23 - 27 July 2017, London.

Kumar, Kranthi J and Jacob, S and Karunanithi, R and Narasimham, GSVL and Damu, C and Praveen, T and Samir, M (2015) Improved performance of an indigenous Stirling type pulse tube cooler and pressure wave generator. In: 25th International Cryogenic Engineering Conference and International Cryogenic Materials Conference, JUL 07-11, 2014, Enschede, NETHERLANDS, pp. 434-439.

Kumar, Krishna R and Narasimhan, R and Prabhakar, O (1992) Dynamic growth of tensile cracks by ductile and brittle fracture mechanisms in a viscoplastic material. In: Acta Metallurgica et Materialia, 40 (7). pp. 1563-1572.

Kumar, M and Patnaik, LM (1997) Automatic Loop Parallelization. In: Computer Journal, 40 (6). p. 301.

Kumar, Mukesh and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48 (6). pp. 376-385.

Kumar, N and Arakeri, JH (2020) Investigation on the effect of temperature on evaporative characteristic length of a porous medium. In: Drying Technology, 38 (9). pp. 1194-1206.

Kumar, N and Arakeri, JH (2020) Mimicking some features of a root-soil system by dual porosity media. In: Agricultural Water Management, 227 .

Kumar, N and Arakeri, JH (2020) Understanding the coupling between the moisture loss and surface temperature in an evaporating leaf-type surface. In: Drying Technology .

Kumar, N and Arakeri, JH and Bobji, MS (2020) Formation of a hard surface layer during drying of a heated porous media. In: PLoS ONE, 15 (2).

Kumar, Navneet and Arakeri, Jaywant H (2018) Evaporation From Confined Porous Media Due to Controlled IR Heating From Above. In: TRANSPORT IN POROUS MEDIA, 125 (2). pp. 311-340.

Kumar, Navneet and Arakeri, Jaywant H (2018) Evaporation From Layered Porous Medium in the Presence of Infrared Heating. In: WATER RESOURCES RESEARCH, 54 (10). pp. 7670-7687.

Kumar, Navneet and Arakeri, Jaywant H (2019) Experimental and numerical investigation of evaporation from line sources of water in low porosity surfaces. In: JOURNAL OF HYDROLOGY, 569 . pp. 795-808.

Kumar, Navneet and Arakeri, Jaywant H (2018) Experimental investigation of effect of orientation and surface roughness on drying of porous media consisting of rods. In: INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 109 . pp. 114-122.

Kumar, Navneet and Arakeri, Jaywant H (2020) Heat and mass transfer from a system of closely packed capillaries - Possible choice for wicks. In: INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 148 .

Kumar, Navneet and Arakeri, Jaywant H (2015) Natural Convection Driven Evaporation from a water surface. In: IUTAM Symposium on Multiphase Flows with Phase Change Challenges and Opportunities, DEC 08-11, 2014, Indian Inst Technol, Hyderabad, INDIA, pp. 108-115.

Kumar, Navneet and Arakeri, Jaywant H (2018) Sustained high evaporation rates from porous media consisting of packed circular rods. In: INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 133 . pp. 299-306.

Kumar, P (2022) HoneyTop90: A 90-line MATLAB code for topology optimization using honeycomb tessellation. In: Optimization and Engineering .

Kumar, P (2022) Topology optimization of stiff structures under self-weight for given volume using a smooth Heaviside function. In: Structural and Multidisciplinary Optimization, 65 (4).

Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2002) Rayleigh-Benard convection during solidification of an eutectic solution cooled from the top. In: Metallurgical and Materials Transactions B, 33 (4). pp. 605-612.

Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2003) Studies on Transport Phenomena during Directional Solidification of a Noneutectic Binary Solution Cooled from the Top. In: Metallurgical and Materials Transactions B, 34 (6). pp. 899-909.

Kumar, P and Lakshmi, H and Dutta, P (2009) Determination of solid fraction evolution during solidification of aluminum alloy in presence of linear electromagnetic stirring. In: International Mechanical Engineering Congress & Exposition, November 13-19, 2009, Lake Buena Vista, Florida, USA.

Kumar, P and Lakshmi, H and Dutta, P (2008) Rheocasting of A356 Alloy using Linear electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Kumar, P and Lakshmi, H and Dutta, P (2007) Rheocasting of aluminium A356 alloy in a linear electromagnetic stirrer. In: The 6th Pacific Rim International Conference on Advanced Materials and Processing, , Nov. 5-9, 2007, Jeju Island, Korea.

Kumar, P and Langelaar, M (2021) On topology optimization of design-dependent pressure-loaded three-dimensional structures and compliant mechanisms. In: International Journal for Numerical Methods in Engineering, 122 (17). p. 4787.

Kumar, P and Philip, JT and Wani, MF and Rai, H and Vashishtha, H and Kuriachen, B and Kumar, D (2022) Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions. In: Transactions of the Indian Institute of Metals .

Kumar, P and Saxena, A (2022) An improved Material Mask Overlay Strategy for the desired discreteness of pressure-loaded optimized topologies. In: Structural and Multidisciplinary Optimization, 65 (10).

Kumar, PA and Raj, R and Kailas, SV (2015) Polymer Derived In-Situ Nano Metal Matrix Composites Obtained by Friction Stir Processing. In: 30th Technical Conference of the American-Society-for-Composites, SEP 28-30, 2015, East Lansing, MI, pp. 2368-2382.

Kumar, Pradeep C and Kailas, Satish V and Menezes, Pradeep L (2006) Role of Surface Texture on Friction and Wear Under Boundary Lubricated Conditions. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, Pramod and Dutta, Pradip and Murthy, Stikantiah Srinivasa and Srinivasan, Kandadai (2016) Solar driven carbon dioxide Brayton cycle power generation with thermal compression. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 854-860.

Kumar, Pramod and Srinivasan, Kandadai (2016) Carbon dioxide based power generation in renewable energy systems. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 831-840.

Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2006) Visualization of convection loops due to Rayleigh-Benard convection during solidification. In: Mechanics Research Communications, 33 (5). pp. 593-600.

Kumar, Praveen (2017) Electromigration in Metallic Materials and Its Role in Whiskering. [Book Chapter]

Kumar, Rajesh and Ravikrishna, RV (2012) Modeling and optimization of a natural convection-based agricultural dryer. In: Journal of Scientific and Industrial Research, 71 (5). pp. 316-323.

Kumar, Ramesh MV and Narasimhan, R (2004) Analysis of spherical indentation of linear viscoelastic materials. In: Current Science, 87 (8). pp. 1088-1095.

Kumar, Ranganathan and Tijerino, Erick and Saha, Abhishek and Basu, Saptarshi (2010) Structural morphology of acoustically levitated and heated nanosilica droplet. In: Applied Physics Letters, 97 (12).

Kumar, S and Arpitha, HM and Swamybabu, V (2020) Experimental quality and strength evaluation of friction stir spot welding of aluminum sheets using flat tool with miniature profile. In: 2019 International Conference on Advances in Materials Research, ICAMR 2019, 25 - 27 Jul 2019, Bengaluru.

Kumar, S and Avinash, G and Vimal, E (2020) Ductility effect on clinching joint strength in lap-shear configuration loading. In: 2nd International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing, IMME 2019, 27 - 28 December 2019, Tamil Nadu, pp. 1667-1672.

Kumar, S and Basu, S (2022) Insight into the flow dynamics of a high shear injector equipped with center-body: Suppression of precessing vortex core oscillations. In: Physics of Fluids, 34 (11).

Kumar, S and Chaudhuri, S and Basu, S (2019) On effect of the flare angle on the behaviour of the flow field of twin-radial swirlers/high shear injector. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Kumar, S and Divakaran, A and Kailas, SV (2023) Fabrication and tribo characteristics of in-situ polymer-derived nano-ceramic composites of Al-Mg-Si alloy. In: Tribology International, 180 .

Kumar, S and Gopi, T and Harikeerthana, N and Gupta, MK and Gaur, V and Krolczyk, GM and Wu, CS (2022) Machine learning techniques in additive manufacturing: a state of the art review on design, processes and production control. In: Journal of Intelligent Manufacturing .

Kumar, S and Lakshmikanthan, A and Selvan, CP and Malik, V and Saxena, KK and Sehgal, S and Mohammed, KA (2022) Effect of interlock angle and bottom die flange diameter on clinching joint load bearing capacity in cross-tensile loading. In: International Journal on Interactive Design and Manufacturing .

Kumar, S and Malavalli, S and Chaudhuri, S and Basu, S (2020) Spray characteristics and flow topologies of high shear injector at high primary swirl. In: International Journal of Multiphase Flow, 131 .

Kumar, S and Rathod, DD and Basu, S (2022) Experimental investigation of performance of high-shear atomizer with discrete radial-jet fuel nozzle: mean and dynamic characteristics. In: Flow, 2 .

Kumar, S and Sharma, A and Philip, JT (2023) Role and capability of the Internet of Things in additive manufacturing and its application regimes. [Book Chapter]

Kumar, S and Wu, C (2021) Eliminating intermetallic compounds via Ni interlayer during friction stir welding of dissimilar Mg/Al alloys. In: Journal of Materials Research and Technology, 15 . pp. 4353-4369.

Kumar, Sachin and Chatterjee, Kaushik (2015) Strontium eluting graphene hybrid nanoparticles augment osteogenesis in a 3D tissue scaffold. In: NANOSCALE, 7 (5). pp. 2023-2033.

Kumar, Santosh and Das, Prosenjit and Tiwari, Sandeep K and Mondal, Manas K and Bera, Supriya and Roy, Himadri and Samanta, Sudip K (2015) Study of Microstructure Evolution during Semi-Solid Processing of an In-Situ Al Alloy Composite. In: MATERIALS AND MANUFACTURING PROCESSES, 30 (3). pp. 356-366.

Kumar, Saurabh and Shrikanth, V and Bharadwaj, Amrutur and Asokan, Sundarrajan and Bobji, MS (2016) Estimating needle-tissue interaction forces for hollow needles using Fiber Bragg Grating Sensors. In: Conference on Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XVI, FEB 13-14, 2016.

Kumar, Saurabh and Shrikanth, Venkoba and Amrutur, Bharadwaj and Asokan, Sundarrajan and Bobji, Musuvathi S (2016) Detecting stages of needle penetration into tissues through force estimation at needle tip using fiber Bragg grating sensors. In: JOURNAL OF BIOMEDICAL OPTICS, 21 (12).

Kumar, Shishir and Pratap, Rudra (2006) Partitioning design space for linear tuning of natural frequencies in planar dynamic MEMS structures. In: Sensors and Actuators, A: Physical, 125 (2). pp. 304-312.

Kumar, Shishir and Venkatesh, KP and Baskar, Sam S and Madhavi, SP (2009) System integration design in MEMS - A case study of micromachined load cell. In: Sadhana, 34 (4). pp. 663-675.

Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.

Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.

Kumar, V and Dash, S (2021) Evaporation-Based Low-Cost Method for the Detection of Adulterant in Milk. In: ACS Omega, 6 (41). pp. 27200-27207.

Kumar, V and Sakalkale, K and Karagadde, S (2022) Convection-induced bridging during alloy solidification. In: Physics of Fluids, 34 (5).

Kumar, V and Srivastava, A and Karagadde, S (2021) Role of microstructure and composition on natural convection during ternary alloy solidification. In: Journal of Fluid Mechanics, 913 .

Kumar, V and Wani, MF and Mannekote, JK and Kailas, SV (2019) Tribological Properties of Some Fatty Acids. In: 2nd International Conference on New Frontiers in Engineering, Science and Technology, NFEST 2019, 18 - 22 February 2019, Kurukshetra, Haryana.

Kumar, Vasanth R and Keshavamurthy, R and Perugu, Chandra S (2016) Microstructure and Mechanical Behaviour of Al6061-ZrB2 In-situ Metal Matrix Composites. In: International Conference on Advances in Materials and Manufacturing Applications (IConAMMA), JUL 14-16, 2016, Bangalore, INDIA.

Kumar, Vikas and Munjal, M L (2017) Flow-acoustic lumped element analysis of the side-inlet/outlet combination mufflers and 1-D and FEM validation thereof. In: NOISE CONTROL ENGINEERING JOURNAL, 65 (3). pp. 197-211.

Kumar , K and Srivatsan, TS and Kailas, Satish V (2007) An insight into understanding the intrinsic mechanisms governing the formation of friction stir welds in joining of metals. In: The International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar Chandra, N and Sharma, S and Basu, S and Kumar, A (2023) Shock-induced aerobreakup of a polymeric droplet. In: Journal of Fluid Mechanics, 965 .

Kumaran, RS and Sharath, PP and Alone, DB and Kumar, P (2023) EVALUATION OF EMPIRICAL LOSS MODELS FOR BASE DRAG PREDICTION OF sCO2 AXIAL TURBINE AEROFOILS. In: UNSPECIFIED.

Kumaraswamy, S and Kunte, K (2013) Integrating biodiversity and conservation with modern agricultural landscapes. In: BIODIVERSITY AND CONSERVATION, 22 (12). pp. 2735-2750.

Kund, NK (2014) Influence of melt pouring temperature and plate inclination on solidification and microstructure of A356 aluminum alloy produced using oblique plate. In: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 24 (11). pp. 3465-3476.

Kund, NK (2015) Influence of plate length and plate cooling rate on solidification and microstructure of A356 alloy produced by oblique plate. In: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 25 (1). pp. 61-71.

Kund, NK and Dutta, P (2010) Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S898-S905.

Kund, NK and Dutta, P (2015) Numerical study of solidification of A356 aluminum alloy flowing on an oblique plate with experimental validation. In: JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 51 . pp. 159-170.

Kund, NK and Dutta, P (2012) Scaling Analysis of Solidification of Liquid Aluminum Alloy Flowing on Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 587-594.

Kundanati, L and Chahare, NR and Jaddivada, S and Karkisaval, AG and Sridhar, R and Pugno, NM and Gundiah, N (2020) Cutting mechanics of wood by beetle larval mandibles. In: Journal of the Mechanical Behavior of Biomedical Materials, 112 .

Kundanati, L and Gundiah, N (2013) Biomechanics of Substrate Boring by Fig Wasps: Role of Zinc in Insect Cuticle. In: INTEGRATIVE AND COMPARATIVE BIOLOGY, 53 (1). E118.

Kundanati, Lakshminath and Gundiah, Namrata (2014) Biomechanics of substrate boring by fig wasps. In: JOURNAL OF EXPERIMENTAL BIOLOGY, 217 (11). pp. 1946-1954.

Kundanati, Lakshminath and Singh, Saket K and Mandal, Biman B and Murthy, Tejas G and Gundiah, Namrata and Pugno, Nicola M (2016) Fabrication and Mechanical Characterization of Hydrogel Infused Network Silk Scaffolds. In: INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 17 (10).

Kunniyoor, V and Singh, P (2021) Supercritical carbon dioxide turbomachinery development using scaling methodology, computational fluid dynamics and experimental testing in aeroloop. In: Progress in Computational Fluid Dynamics, 21 (1). pp. 19-37.

Kunniyoor, V and Singh, P and Nadella, K (2021) Aerodynamic design and computational fluid dynamic analysis of radial outflow turbines for steam Rankine cycle and supercritical carbon dioxide Brayton cycle. In: Progress in Computational Fluid Dynamics, 21 (2). pp. 65-90.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2012) Asymptotic expansions for the coupled wavenumbers in an infinite orthotropic flexible fluid-filled cylindrical shell. In: Journal of the Acoustical Society of America, 131 (6). pp. 4272-4282.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2010) Generalized asymptotic expansions for coupled wavenumbers in fluid-filled cylindrical shells. In: Journal of Sound and Vibration, 329 (25). pp. 5356-5374.

Kunte, MV and Sarkar, Abhijit and Sonti, Venkata R (2011) Generalized asymptotic expansions for the wavenumbers in infinite flexible in vacuo orthotropic cylindrical shells. In: Journal of Sound and Vibration, 330 (23). pp. 5628-5643.

Kunte, MV and Sonti, Venkata R (2013) Asymptotic wavenumber expansions of a strongly orthotropic fluid-filled circular cylindrical shell. In: Wave Motion, 50 (3). pp. 402-414.

Kunte, MV and Sonti, Venkata R (2011) Coupled Wavenumbers in an Infinite Flexible Fluid-Filled Circular Cylindrical Shell: Comparison between Different Shell Theories. In: Computer Modeling in Engineering and Sciences (CMES), 81 (2). pp. 119-156.

Kuppu Rao, V (1980) A note on mass transfer in turbulent wall jets. In: International Journal of Heat and Mass Transfer, 23 (12). pp. 1690-1693.

Kuppuraj, R and Pasupathy, SA (2019) A novel beetle-inspired fuel injection system for improved combustion efficiency. [Book Chapter]

L

Lakshmi, H and Kumar, Vinay MC and Raghunath, * and Kumar, P and Ramanarayanan, V and Murthy, KSS and Dutta, P (2010) Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S961-S967.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1981) On a finite element model for the analysis of through cracks in laminated anisotropic cylindrical shells. In: Engineering Fracture Mechanics, 14 (4). pp. 697-712.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1982) On an analytical-numerical procedure for the analysis of cylindrical shells with arbitrarily oriented cracks. In: International Journal of Fracture, 19 (4). pp. 257-275.

Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1982) On an analytical-numerical procedure for the analysis of cylindrical-shells with arbitrarily oriented cracks. In: International Journal of Fracture, 19 (4). pp. 257-275.

Lakshmip, DV and Hariharan, R and Tirunarayanan, MA (1973) Pressure Transducer For Low-Temperature Applications. In: Indian Journal Of Technology, 11 (5). pp. 233-236.

Lankalapalli, Shrinivas and Ghosal, Ashitava (1997) Chaos in Robot Control Equations. In: International Journal of Bifurcation and Chaos, 7 (3). pp. 707-720.

Lankalapalli, Shrinivas and Ghosalt, Ashitava (1996) Possible Chaotic Motions in a Feedback Controlled 2R Robot. In: IEEE International Conference on Robotics and Automation, 22-28 April 1996, Minneapolis, MN, USA, Vol.2, 1241-1246.

Lavanya, SB and Jayanth, GR (2022) Control of interaction force in constant-height contact mode atomic force microscopy. In: Mechatronics, 88 .

Lavanya, SB and Jayanth, GR (2022) Modeling and Optimal Design of Bridge-Type Displacement Amplifier. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021- 11 December 2021, Jabalpur, pp. 117-125.

Lavanya, SB and Jayanth, GR (2024) A nano-positioning system based on an optimal two-stage linear displacement amplifier. In: Sensors and Actuators A: Physical, 366 .

Lee, Joshua and Basu, Saptarshi and Kumar, Ranganathan (2013) COMPARISON AND CROSS-VALIDATION OF OPTICAL TECHNIQUES IN DIFFERENT SWIRL SPRAY REGIMES. In: ATOMIZATION AND SPRAYS, 23 (8). pp. 697-724.

Li, C and Protik, NH and Ravichandran, NK and Broido, D (2023) High-frequency phonons drive large phonon-drag thermopower in semiconductors at high carrier density. In: Physical Review B, 107 (8).

Lijesh, K P and Khonsari, M M and Kailas, Satish (2018) On the integrated degradation coefficient for adhesive wear: A thermodynamic approach. In: WEAR, 408 . pp. 138-150.

Likhar, PV and Divakaran, A and Kailas, SV (2022) An energy dissipation tribometer to evaluate friction in boundary lubrication regime. In: Tribology International, 171 .

Limaye, P and Ramu, G and Pamulapati, S and Ananthasuresh, GK (2009) A Compliant Mechanism Kit with Flexible Beams and Connectors. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Limaye, Padmanabh and Ramu, G and Pamulapati, Sindhuja and Ananthasuresh, GK (2012) A compliant mechanism kit with flexible beams and connectors along with analysis and optimal synthesis procedures. In: Mechanism and Machine Theory, 49 . pp. 21-39.

Liu, T and Gao, S and Shen, X and Sun, Z and Shi, L and Kumar, S and Yang, C (2023) Acoustic effect on the joint quality and process of friction stir lap welding of aluminum to steel. In: Materials Today Communications, 35 .

Liu, T and Gao, S and Shen, X and Yin, Q and Shi, L and Kumar, S and Qiao, J and Zhang, H (2024) Analysis on the performance of aluminum/steel UVeFSW joints by changing ultrasonic powers. In: Materials Letters, 354 .

Liu, T and Gao, S and Ye, W and Shi, L and Kumar, S and Qiao, J (2023) Achievement of high-quality joints and regulation of intermetallic compounds in ultrasonic vibration enhanced friction stir lap welding of aluminum/steel. In: Journal of Materials Research and Technology, 25 . pp. 5096-5109.

Lockwood, AJ and Anantheshwara, K and Bobji, MS and Inkson, BJ (2011) Friction-formed liquid droplets. In: Nanotechnology, 22 (10).

Lockwood, AJ and Wedekind, J and Gay, RS and Bobji, MS and Amavasai, B and Howarth, M and Moebus, G and Inkson, BJ (2010) Advanced transmission electron microscope triboprobe with automated closed-loop nanopositioning. In: Measurement Science and Technology, 21 (7).

Lockwood, AJ and Wedekind, J and Gay, RS and Wang, JJ and Bobji, MS and Amavasai, B and Howarth, M and Möbus, G and Inkson, BJ (2011) NanoLAB Triboprobe: Characterizing Dynamic Wear, Friction and Fatigue at the Nanoscale. In: MRS Proceedings, 1297 . 03-61.

Lohar, KA and Venkatesh, KP and Pratap, R (2008) Effect of Process Induced Variations on the Performance Characteristics of Dual Mass Vibratory MEMS Gyroscope. In: International Conference on Smart materials, Structures and Systems, Indian Institute of Science, Bangalore, IISc Bangalore.

Lonkar, S and Kumar, S and Nalawade, H and Panda, PP (2023) Flow and Heat Transfer Instabilities in a Helical Regenerative Cooling Channel. In: 25th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 28 May 2023through 1 June 2023, Bengaluru.

Lourdes Thomas, T and Kalpathy Venkiteswaran, V and Ananthasuresh, GK and Misra, S (2021) Surgical Applications of Compliant Mechanisms: A Review. In: Journal of Mechanisms and Robotics, 13 (2).

Lugovoy, O and Jyothiprakash, V and Chatterjee, S and Sharma, S and Mukherjee, A and Das, A and Thakur, B and Some, S and Dinesha, DL and Das, N and Bosu, P and Padhi, L and Roy, B and Debsarkar, A and Patil, B and Dasgupta, S and Roy, J (2021) Towards a zero-carbon electricity system for india in 2050: Ideea model-based scenarios integrating wind and solar complementarity and geospatial endowments. In: Energies, 14 (21).

Luthra, Abhinav and Jha, Anupam Nath and Ananthasuresh, GK and Vishveswara, Saraswathi (2007) A method for computing the inter-residue interaction potentials for reduced amino acid alphabet. In: Journal of Biosciences, 32 (5). pp. 883-889.

M

M, Muthukumar and Bobji, MS and Simha, KRY (2022) Cone cracks in tissue-mimicking hydrogels during hypodermic needle insertion: the role of water content. In: Soft Matter, 18 . pp. 3521-3530. ISSN 1744-683X

Madahevan, P and Jog, CS and Chatterjee, A (2007) Critical Speed of Arbitrary Shaped Axisymmetric Rotors Books. In: Conference on Advances in Space Science and Technology (CASST'2007), 2007, IISc, Bangalore.

Madanmohan, A and Ravikrishna, RV (2007) Multi-dimensional Combustion Simulations in a Single-Cylinder Biogas-fuelled Spark Ignition Engine with Detailed chemistry. In: 6th Asia-Pacific Conference on Combustion, , 2007, Nagoya, Japan.

Madhav, HV and Raghavendra, V and Kumar, P and Ambirajan, A and Dutta, P (2021) Development of a Canister Module for PCM Coupled Heat Pipe in Spacecraft Thermal Management. In: IEEE Transactions on Components, Packaging and Manufacturing Technology, 11 (11). pp. 1804-1815.

Madhu, H C and Kailas, Satish V (2018) Fabrication of localised aluminium foam by a novel polymeric blowing agent. In: MATERIALS CHARACTERIZATION, 142 . pp. 340-351.

Madhu, H C and Kailas, V Satish (2016) In-Situ Aluminothermal Reduction Synthesis of Ti3AlC2 Aluminium Composite by Friction Stir Processing. In: 1st International Conference on Sustainable Materials Processing and Manufacturing (SMPM), JAN 23-25, 2017, Skukuza, SOUTH AFRICA, pp. 157-162.

Madhu, H C and Kumar, P Ajay and Perugu, Chandra S and Kailas, Satish V (2018) Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (3). pp. 1318-1326.

Madhu, HC and Edachery, V and Lijesh, KP and Perugu, CS and Kailas, SV (2020) Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4086-4099.

Madhuri, MR and Srinivasan, K and Dutta, P (2023) Performance evaluation of a two-stage air-cooled silica gel + water adsorption cooling system: Effect of key operational parameters. In: Applied Thermal Engineering, 232 .

Madhusudhan, K and Narasimhan, MV and Ravikrishna, RV (2006) New cyclone separator-based prefilter design for internal combustion engine applications. Part 1: experiments and simulation. In: Proceedings of the Institute of Mechanical Engineers Part C -Journal of Mechanical Engineering Science, 220 (9). pp. 1353-1362.

Madhusudhan, K and Narasimhan, MV and Ravikrishna, RV (2006) A new cyclone separator-based pre-filter design for internal combustion engine applications. Part 2: parametric study and optimization. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (12). pp. 1755-1764.

Madhusudhana, KS and Narasimhan, R (2002) Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint. In: Engineering Fracture Mechanics, 69 (7). pp. 865-883.

Madival, Deepak G (2018) Stochastic growth of cloud droplets by collisions during settling. In: THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 32 (2). pp. 235-244.

Mahadevan, Pradeep and Chatterjee, Anindya (2009) Axially Loaded Timoshenko Rotors From A Prestressed Continuum Approach. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa,Israel, pp. 569-576.

Mahadevan, P and Chatterjee, A (2007) Some Classical Buckling Problems Revisited from a Continuum Approach. In: UNSPECIFIED, pp. 179-185.

Mahapatra, B and Jana, R and Bandopadhyay, A (2024) Solute band transport in electroosmotic-pressure-driven flow of Carreau-Yasuda fluid over micropillar arrays. In: Physics of Fluids, 36 (2).

Mahapatra, SK and Ghosal, A (2024) Modeling of Cable-Driven Continuum Robots with Multiple Generally Routed Cables. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 803-810.

Mahapatra, SK and Ghosal, A (2024) Modeling, simulations and experiments with generally routed cable-driven continuum robots and their application to three-fingered grippers. In: Robotica .

Mahapatra, SK and Ghosal, A (2023) Obtaining Desired Shapes of Cable-Driven Continuum Robots Using General Cable Routing. In: UNSPECIFIED, pp. 130-138.

Maharana, P and Ananthasuresh, GK (2022) Analysis of Connected Shallow Arches Under a Load from a Moving Rigid Wedge. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 - 11 December 2021, Jabalpur, pp. 191-204.

Maharana, P and Shekhar, S and Ananthasuresh, GK (2023) MECHANICAL LOGIC GATES AND PROCESSORS USING HINGE-CONNECTED PINNED-PINNED ARCHES. In: Design Engineering Technical Conference, 20-9-2023 to 23-9-2023, boston.

Maharana, P and Sonawane, J and Belehalli, P and Anathasuresh, GK (2019) Analysis of Planar Bistable and Snap-through Arches for Contact and Dynamic Loads. In: IFToMM World Congress on Mechanism and Machine Science. 2019, pp. 3245-3254.

Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.

Mahato, Anirban and Sachdev, Anil and Biswas, SK (2010) Lubricated Tribology of a Eutectic Aluminium-Silicon Alloy in the Ultra-Mild Wear and Mild Wear Regimes for Long Sliding Times. In: ACS Applied materials & interfaces , 2 (10). pp. 2870-2879.

Mahato, Anirban and Sachdev, Anil K and Biswas, SK (2008) Effect of particle morphology on resistance to permanent sinking by normal loading of silicon particle in aluminium matrix of a cast aluminium silicon alloy. In: Wear, 365 (5-6). pp. 849-855.

Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.

Mahato, Anirban and Xia, Shuman and Perry, Tom and Sachdev, Anil and Biswas, SK (2010) Role of silicon in resisting subsurface plastic deformation in tribology of aluminium-silicon alloys. In: Tribology International, 43 (1-2). pp. 381-387.

Mahesh, V and Mahesh, V and Mangalasseri, AS and Harursampath, D and Ponnusami, SA (2023) Effect of functionally graded magneto-electro-elastic facings on the damped nonlinear transient response of a sandwich plate with agglomerated CNT core. [Book Chapter]

Maheswari, N and Reddy, AN and Sahu, DK and Ananthasuresh, GK (2009) Miniature Compliant Grippers with Force-Sensing. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Mahulkar, SV and Arakeri, JH (2023) A self-propelling clapping body. In: Journal of Fluid Mechanics, 971 .

Maiya, MP and Kumar, K and Hafner, A and Banasiak, K and Neksa, P and Kumar, P and Singh, S (2019) Experimental analysis of transcritical CO2 booster refrigeration system with heat recovery and ejector expansion. In: 25th IIR International Congress of Refrigeration, ICR 2019, 24 August 2019 - 30 August 2019, Montreal, pp. 1467-1474.

Majee, S and Maiti, S and Shit, GC and Maiti, DK (2021) Spatio-temporal evolution of magnetohydrodynamic blood flow and heat dynamics through a porous medium in a wavy-walled artery. In: Computers in Biology and Medicine, 135 .

Majee, S and Saha, A and Basu, S (2023) Effects of oscillating gas-phase flow on an evaporating multicomponent droplet. In: Journal of Fluid Mechanics, 956 .

Makireddi, D and Ghuge, VD and Behera, A (2021) Use of powder bath sintering for the fabrication of hard ceramic tools. In: Materials and Manufacturing Processes, 37 (2). pp. 160-168.

Makireddi, D and Ghuge, VD and Behera, A and Puri, YM and Thakare, G and Thawre, MM (2023) Enhancing the hardness of alumina-zirconia-CNT composites using alumina-graphite powder bath to provide homogeneous sintering. In: Advances in Applied Ceramics .

Malhi, Charanjeet Kaur and Pratap, Rudra (2016) On the Equivalence of Acoustic Impedance and Squeeze Film Impedance in Micromechanical Resonators. In: JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 138 (1).

Malhi, Charanjeet Kaur and Pratap, Rudra (2016) On the method of extraction of lumped parameters for the radiation impedance of complex radiator geometries. In: MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 22 (9). pp. 2241-2249.

Malik, V and Kailas, SV (2018) Plasticine modeling of material mixing in friction stir welding. In: Journal of Materials Processing Technology, 258 . pp. 80-88.

Malik, V and Kailas, SV (2021) Understanding the effect of tool geometrical aspects on intensity of mixing and void formation in friction stir process. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (4). pp. 744-757.

Malleswararao, K and Aswin, N and Kumar, P and Dutta, P and Srinivasa Murthy, S (2022) Experiments on a novel metal hydride cartridge for hydrogen storage and low temperature thermal storage. In: International Journal of Hydrogen Energy, 47 (36). pp. 16144-16155.

Malleswararao, K and Dutta, P and Murthy S, S (2022) Applications of metal hydride based thermal systems: A review. In: Applied Thermal Engineering, 215 .

Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2024) Experimental investigations on a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 56 . pp. 1371-1383.

Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2023) Experimental studies on LaNi4.25Al0.75 alloy for hydrogen and thermal energy storage applications. In: International Journal of Hydrogen Energy .

Malleswararao, K and N, A and Srinivasa Murthy, S and Dutta, P (2020) Performance prediction of a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 45 (32). pp. 16239-16253.

Mallik, Awadesh K and Binu, SR and Satapathy, LN and Narayana, Chandrabhas and Seikh, Md Motin and Shivashankar, SA and Biswas, SK (2010) Effect of substrate roughness on growth of diamond by hot filament CVD. In: Bulletin of Materials Science, 33 (3). pp. 251-255.

Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.

Malviya, N and Ravichandran, NK (2023) Failure of the Callaway description of heat flow in boron arsenide and boron antimonide driven by phonon scattering selection rules. In: Physical Review B, 108 (15).

Mamgain, A and Kumar, V and Dash, S (2024) Image-Based Detection of Adulterants in Milk Using Convolutional Neural Network. In: ACS Omega .

Mana, Anoop Akkoorath and Sonti, Venkata R (2019) Sound radiation from a finite perforated panel set in a rigid baffle: A fully coupled analysis. In: WAVE MOTION, 85 . pp. 144-164.

Mana, Anoop Akkoorath and Sonti, Venkata R (2016) Sound radiation from a perforated panel set in a baffle with a different perforation ratio. In: JOURNAL OF SOUND AND VIBRATION, 372 . pp. 317-341.

Mana, Anoop Akkoorath and Sonti, Venkata R (2018) Sound transmission through a finite perforated panel set in a rigid baffle: A fully coupled analysis. In: JOURNAL OF SOUND AND VIBRATION, 414 . pp. 126-156.

Mana, Anoop Akkoorath and Sonti, Venkata R (2017) Sound transmission through a finite perforated panel set in a rigid baffle: A fully coupled analysis. In: JOURNAL OF SOUND AND VIBRATION, 414 . pp. 126-156.

Mangaraju, Venkata and Sonti, Venkata R (2004) Wave attenuation in periodic three-layered beams: analytical and FEM study. In: Journal of Sound and Vibration, 276 (3-5). 541–570.

Mani, Mohan Raj and Gebrekrstos, Amanuel and Madras, Giridhar and Poetschke, Petra and Bose, Suryasarathi (2018) PVDF-MWNT interactions control process induced beta-lamellar morphology and orientation in the nanocomposites. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 20 (38). pp. 24821-24831.

Manila, MR and Mitra, S and Dutta, P (2020) Studies on dynamics of two-stage air cooled water/silica gel adsorption system. In: Applied Thermal Engineering, 178 .

Manila, RM and Srinivasan, K and Dutta, P (2024) Experimental studies on the impact of adsorbent particle size on the adsorption chiller performance �tudes expérimentales sur l'impact de la taille des particules d'adsorbant sur les performances d'un refroidisseur à adsorption. In: International Journal of Refrigeration, 164 . pp. 154-166.

Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.

Manivannan, M and Srinivasan, M.N. (1997) An agent based architecture for collaborative design and analysis. In: Proceedings of 4th ISPE International Conference on Concurrent Engineering: Research and Applications, 20-22 Aug. 1997, Rochester, MI, USA, pp. 347-354.

Mankame, ND and Ananthasuresh, GK (2007) Synthesis of contact-aided compliant mechanisms for non-smooth path generation. In: International Journal for Numerical Methods in Engineering, 69 (12). pp. 2564-2605.

Mankame, Nilesh D and Ananthasuresh, GK (2007) A Compliant Transmission Mechanism With Intermittent Contacts for Cycle-Doubling. In: Journal of Mechanical Design, 129 (1). 114 -121.

Mannekote, J K and Kailas, S V and Venkatesh, K and Kathyayini, N (2017) A Study on Chemical and Lubrication Properties of Unrefined, Refined and Virgin Coconut Oil Samples. In: JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 76 (2). pp. 100-104.

Mannekote, JK and Kathyayini, N and Venkatesh, K and Kailas, SV (2017) Study on Effect of Aging and Aging Temperature on Frictional Properties of Coconut Oil Samples. In: Journal of Scientific and Industrial Research, 76 (6). pp. 376-380.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Influence of unsaturation on boundary lubrication properties of few oxidized neat vegetable oils. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December, 2009.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Performance evaluation of vegetable oils as lubricant in a four stroke engine. In: World Tribology conference 2009, Sep 12-15, 2009, kyoto, Japan.

Mannekote, Jagadeesh K and Kailas, Satish V (2009) Studies on boundary lubrication properties of oxidised coconut and soy bean oils. In: Lubrication Science, 21 (9). pp. 355-365.

Mannekote, Jagadeesh K and Kailas, Satish V and Naik, RT (2009) Condition monitoring of vegetable oils used in a 4 stroke engine as lubricants. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December 2009.

Mannekote, Jagadeesh K and Kailas, Satish V and Venkatesh, K and Kathyayini, N (2018) Environmentally friendly functional fluids from renewable and sustainable sources-A review. In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 81 (2). pp. 1787-1801.

Manoj Kumar, R and Ramaiah, KV and Saikrishna, CN and Ravi Kumar, A and Bhaumik, SK and Ananthasuresh, GK (2009) A Mechanism with SMA Tendon Actuator for an Aircraft Flap. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials , Oct. 14-16, 2009, Kolkatta.

Manu, KV and Anand, Prateek and Chetia, Utpal Kumar and Basu, Saptarshi (2015) Effects of instabilities and coherent structures on the performance of a thermocline based thermal energy storage. In: APPLIED THERMAL ENGINEERING, 87 . pp. 768-778.

Manu, KV and Deshmukh, Pranit and Basu, Saptarshi (2016) Rayleigh-Taylor instability in a thermocline based thermal storage tank. In: INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 100 . pp. 333-345.

Marathe, AG and Prabhakar, V and Jain, VK (1980) Studies on Hydrogen-Bromine Reaction Scheme. In: Combustion Science and Technology, 21 (3-4). 181 -182.

Marathe, Amol and Chatterjee, Anindya (2005) Wave attenuation in nonlinear periodic structures using harmonic balance and multiple scales. In: Journal of Sound and Vibration, 289 (4-5). pp. 871-888.

Marur, PR and Sinha, KRY and Nair, PS (1995) A Compact Testing System For Dynamic Fracture Studies. In: Journal Of Testing And Evaluation, 23 (4). pp. 267-274.

Marur, PR and Nair, PS and Simha, KRY (1994) Influence of anvil supports and overhangs in dynamic analysis of three point bend testing. In: International journal of fracture, 69 (3). R57 -R62.

Marur, PR and Nair, PS and Simha, KRY (1996) Two Degrees of Freedom Modeling of Precracked Beams under Impact. In: Engineering Fracture Mechanics, 53 (3). pp. 481-491.

Marur, PR and Simha, KPR (1996) Dynamic initiation toughness measu~ment using double Grooved discs. In: International Journal of Fracture, 77 (03). R55-R59.

Marur, PR and Simha, KRY and Nair, PS (1994) Dynamic analysis of three point bend specimens under impact. In: International journal of fracture, 68 (3). pp. 261-273.

Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.

Math, Souvik and Horn, Roger and Jayaram, Vikram and Biswas, Sanjay K (2007) A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus. In: Journal of Colloid and Interface Science, 308 (2). pp. 551-561.

Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.

Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.

Mathai, Varghese and Govardhan, Raghuraman N and Arakeri, VH (2015) On the impact of a concave nosed axisymmetric body on a free surface. In: APPLIED PHYSICS LETTERS, 106 (6).

McBride, Samantha A and Dash, Susmita and Khan, Sami and Varanasi, Kripa K (2019) Evaporative Crystallization of Spirals. In: LANGMUIR, 35 (32). pp. 10484-10490.

McBride, Samantha A and Dash, Susmita and Varanasi, Kripa K (2018) Evaporative Crystallization in Drops on Superhydrophobic and Liquid-Impregnated Surfaces. In: LANGMUIR, 34 (41). pp. 12350-12358.

Medipati, C and Deivandren, S and Govardhan, RN (2024) Effect of Nozzle Internal Shape on Near-Field Characteristics of Transverse Liquid Jet in a Supersonic Crossflow. In: Fluid Mechanics and Fluid Power, FMFP 2022, pp. 857-866.

Medipati, C and Deivandren, S and Govardhan, RN (2023) Liquid jet injection in supersonic crossflow: Self-induced jet oscillations and its effects. In: International Journal of Multiphase Flow, 158 .

Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Role of surface texture of harder surface on subsurface deformation. In: Wear, 266 (1-2). pp. 103-109.

Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.

Menezes, Pradeep L and Kailas, Satish V (2009) Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. In: Tribology Transactions, 52 (5). pp. 611-622.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Effect of Surface Topography on Friction and Transfer Layer Formation during Sliding. In: Proceedings of The Third Asia International Conference on Tribology ASIATRIB 2006 , 2006, Kanazawa, Japan.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Influence of Roughness Parameters on Friction and Transfer Layer Formation. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kailas, Satish V and Shimjith, M (2006) Role of Surface texture on Friction and Transfer Layer Formation when Mg-8Al Alloy Slid Against Steel Counterface. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel. In: Journal of Tribology-Transactions of the ASME, 128 (4). pp. 697-704.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of directionality of grinding marks on coefficient of friction and formation of transfer layer. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) The Role of Surface Texture on Friction and Transfer Layer Formation - A Study of Aluminium and Steel Pair using Pin-on-Plate Sliding Tester. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Studies on friction and formation of transfer Layer in HCP metals. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) The role of strain rate response on transfer layer formation during sliding. In: 1st International conference on Abrasive Processes, 21-25 September, Cambridge, U.K, 21-25 September, Cambridge.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction and transfer layer formation in FCC metals: Role of surface texture and roughness parameters. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction in metal forming processes – A study using experiments and simulation. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of alloying element addition on friction and transfer layer formation in Al-Mg system: Role of Surface texture. In: ASME/STLE International Joint Tribology Conference (IJTC2009) Tennessee, 2009, USA.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of tilt angle and grinding angle of the plate on friction and transfer layer formation. In: World Tribology Congress IV Kyoto, 2009, Japan.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.

Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.

Menezes, Pradeep L and Kishore, Kishore and Kailas, Satish V and Lovell, Michael R (2015) Influence of Surface Texture and Roughness of Softer and Harder Counter Materials on Friction During Sliding. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 393-403.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Menon, Midhun S and Ananthasuresh, GK and Ghosal, Ashitava (2013) Natural motion of one-dimensional flexible objects using minimization approaches. In: Mechanism and Machine Theory, 67 . pp. 64-76.

Menon, Midhun S and Gurumoorthy, B and Ghosal, Ashitava (2016) Efficient simulation and rendering of realistic motion of one-dimensional flexible objects. In: COMPUTER-AIDED DESIGN, 75-76 . pp. 13-26.

Menon, Midhun S and Ravi, V C and Ghosal, Ashitava (2017) Trajectory Planning and Obstacle Avoidance for Hyper-Redundant Serial Robots. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 9 (4).

Meshram, Ajinkya and Jaiswal, Ankush Kumar and Khivsara, Sagar D and Ortega, Jesus D and Ho, Clifford and Bapat, Rucha and Dutta, Pradip (2016) Modeling and analysis of a printed circuit heat exchanger for supercritical CO2 power cycle applications. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 861-870.

Midhun, EK and Ratnoo, A (2022) Quadrotor Guidance for Traversal through Moving Gaps using Bearing-Only Information. In: AIAA Science and Technology Forum and Exposition, 3-7 Jan 2022, San Diego.

Miglani, Ankur and Basu, Saptarshi (2015) Coupled Mechanisms of Precipitation and Atomization in Burning Nanofluid Fuel Droplets. In: SCIENTIFIC REPORTS, 5 .

Miglani, Ankur and Basu, Saptarshi (2015) Effect of Particle Concentration on Shape Deformation and Secondary Atomization Characteristics of a Burning Nanotitania Dispersion Droplet. In: JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 137 (10).

Miglani, Ankur and Basu, Saptarshi (2015) Sphere to ring morphological transformation in drying nanofluid droplets in a contact-free environment. In: SOFT MATTER, 11 (11). pp. 2268-2278.

Miglani, Ankur and Basu, Saptarshi and Kumar, Ranganathan (2014) Insight into instabilities in burning droplets. In: PHYSICS OF FLUIDS, 26 (3).

Miglani, Ankur and Basu, Saptarshi and Kumar, Ranganathan (2014) Suppression of instabilities in burning droplets using preferential acoustic perturbations. In: COMBUSTION AND FLAME, 161 (12). pp. 3181-3190.

Miglani, Ankur and Joo, Daniel and Basu, Saptarshi and Kumar, Ranganathan (2013) Nucleation dynamics and pool boiling characteristics of high pressure refrigerant using thermochromic liquid crystals. In: International Journal of Heat and Mass Transfer, 60 . pp. 188-200.

Milton, SG and Arakeri, VH (1992) Studies on Cavitation Inception Process in Separated Flows. In: Journal of Fluids Engineering, 114 (1). pp. 85-92.

Mimani, A and Munjal, ML (2012) 3-D acoustic analysis of elliptical chamber mufflers having an end-inlet and a side-outlet: An impedance matrix approach. In: Wave Motion, 49 (2). pp. 271-295.

Mimani, A and Munjal, ML (2011) 3D Acoustic Analysis Of Spherical Chamber Having Single Inlet And Multiple Outlet: An Impedance Matrix Approach. In: International Applied Mechanics, 3 (4). pp. 685-710.

Mimani, A and Munjal, ML (2016) Acoustic End-Correction in a Flow-Reversal End Chamber Muffler: A Semi-Analytical Approach. In: JOURNAL OF COMPUTATIONAL ACOUSTICS, 24 (2).

Mimani, A and Munjal, ML (2012) Acoustical behavior of single inlet and multiple outlet elliptical cylindrical chamber muffler. In: NOISE CONTROL ENGINEERING JOURNAL, 60 (5). pp. 605-626.

Mimani, A and Munjal, ML (2012) On the Role of Higher-Order Evanescent Modes in End-Offset Inlet and End-Centered Outlet Elliptical Flow-Reversal Chamber Mufflers. In: INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 17 (3). pp. 139-154.

Mimani, A and Munjal, ML (2011) Three-dimensional acoustic analysis of an elliptical chamber muffler with a side inlet and a side outlet. In: 18th International Congress on Sound and Vibration, 10-14 July 2011, Rio de Janeiro.

Mimani, A and Munjal, ML (2011) Transverse plane wave analysis of short elliptical chamber mufflers: An analytical approach. In: Journal of Sound and Vibration, 330 (7). pp. 1472-1489.

Minkowycz, WJ and Basak, Tanmay and Ravi, R and Jayanti, S and Das, SK and Roy, Satyajit and Chhabra, RP and Biswas, Gautam and Dutta, Pradip and Rose, John W and Bejan, Adrian and Taine, Jean (2016) Professor Arcot R. Balakrishnan on his 65th birthday. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 94 . pp. 498-499.

Mishra, DP and Paul, PJ and Mukunda, HS (1994) Stretch effects extracted from propagating spherical premixed flames with detailed chemistry. In: 25th International Symposium on Combustion, JUL 31-AUG 05, 1994, IRVINE, CA.

Mishra, DP and Pau, PJ and Mukunda, HS (1994) Stretch effects extracted from inwardly and outwardly propagating spherical premixed flames. In: Combustion and Flame, 97 (1). pp. 35-47.

Mishra, S and Basu, S (2011) A computational study of flame dynamics on soot production and transport for an acetylene-air laminar diffusion flame in the field of a convecting line vortex. In: Seventh Mediterranean Combustion Symposium, Sept. 11-15, 2011, Sardinia, Italy.

Mishra, S and Basu, S (2011) A computational study of heat transfer, soot production and transport in an acetylene-air laminar diffusion flame in the field of a line vortex. In: 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, Indian Institute of Technology Madras, Chennai in .

Mishra, S and Yazar, KU and Kar, A and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (1). pp. 151-166.

Mishra, Shantanu and Santhosh, R and Basu, Saptarshi (2013) Scalar transport in diffusion flame wrapped up by an air and fuel side vortex. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 47 . pp. 32-40.

Mishra, YN and Boggavarapu, P and Chorey, D and Zigan, L and Will, S and Deshmukh, D and Rayavarapu, R (2020) Application of frame for simultaneous lif and lii imaging in sooting flames using a single camera. In: Sensors (Switzerland), 20 (19). pp. 1-14.

Mitra, Nibedita and Vijayan, Kalyani and Pramila Bai, BN and Biswas, SK (1993) Phase Transformation Introduced by Mechanical and Chemical Surface Preparations of Tetragonal Zirconia Polycrystals. In: Journal of the American Ceramic Society, 76 (2). pp. 533-535.

Mitra, S and Dutta, P and Saha, BB (2023) Scaling of heat and mass transfer processes in adsorption column. [Book Chapter]

Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.

Mitra, Sourav and Aswin, N and Dutta, Pradip (2016) Scaling analysis and numerical studies on water vapour adsorption in a columnar porous silica gel bed. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 95 . pp. 853-864.

Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2016) Development and performance studies of an air cooled two-stage multi-bed silica-gel plus water adsorption system. In: INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 67 . pp. 174-189.

Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2015) Instrumentation and control of a two-stage 4-bed silica gel plus water adsorption cooling cum desalination system. In: MEASUREMENT, 79 . pp. 29-43.

Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2015) Performance evaluation of a two-stage silica gel plus water adsorption based cooling-cum-desalination system. In: INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 58 . pp. 186-198.

Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2014) Simulation study of a two-stage adsorber system. In: APPLIED THERMAL ENGINEERING, 72 (2, SI). pp. 283-288.

Mitra, Sourav and Oh, Seung Taek and Saha, Bidyut Baran and Dutta, Pradip and Srinivasan, Kandadai (2015) SIMULATION STUDY OF THE ADSORPTION DYNAMICS OF CYLINDRICAL SILICA GEL PARTICLES. In: HEAT TRANSFER RESEARCH, 46 (2). pp. 123-140.

Mitra, Sourav and Srinivasan, Kandadai and Kumar, Pramod and Dutta, Pradip (2016) Silica Gel plus Water Adsorber Chiller and Desalination System: A Transient Heat Transfer Study. In: JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 8 (2).

Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Dutta, Pradip (2017) Modeling the effect of heat source temperature on the performance of two-stage air cooled silica gel plus water adsorption system. In: 8th International Conference on Applied Energy (ICAE), OCT 08-11, 2016, Beijing, PEOPLES R CHINA, pp. 2010-2015.

Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Dutta, Pradip (2017) Performance evaluation and determination of minimum desorption temperature of a two-stage air cooled silica gel/water adsorption system. In: APPLIED ENERGY, 206 . pp. 507-518.

Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Srinivasan, Kandadai and Dutta, Pradip (2017) Modeling study of two-stage, multi-bed air cooled silica gel plus water adsorption cooling cum desalination system. In: APPLIED THERMAL ENGINEERING, 114 . pp. 704-712.

Mittal, RK and Singh, RK (2021) Investigation of gyroscopic effect on the stability of high speed micromilling via bifurcation analysis. In: Journal of Manufacturing and Materials Processing, 5 (4).

Mogra, M and Aouti, R and Rakesh, NS and Ahmed, A and Ashwin, R and Joseph, J and Ananthasuresh, GK (2021) Analysis of a Soil-Moisture Sensor for Potential Failure Modes and Mass Manufacturing. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 - 7 December 2019, Mandi, pp. 1157-1167.

Mohan, A and Tomar, G (2021) Interface reconstruction and advection schemes for volume of fluid method in axisymmetric coordinates. In: Journal of Computational Physics, 446 .

Mohan, A and Tomar, G (2024) Volume of Fluid Method: A Brief Review. In: Journal of the Indian Institute of Science, 104 . pp. 229-248.

Mohan, AM and Anand, TNC and Ravikrishna, RV (2018) Atomization patterns produced by viscous, like-on-like impinging liquid jets. In: Journal of Flow Visualization and Image Processing, 25 (2). pp. 65-76.

Mohan, Madan A and Anand, TNC and Ravikrishna, RV (2012) Experimental spray characterisation of air-assisted impinging jets. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Mohan, SJ and Pratap, R (2002) A Group Theoretic Approach to the Linear Free Vibration Analysis of Shells with Dihedral Symmetry. In: Journal of Sound and Vibration, 252 (2). pp. 371-341.

Mohan, Sai Jagan and Pratap, Rudra (2004) A natural classification of vibration modes of polygonal ducts based on group theoretic analysis. In: Journal of Sound and Vibration, 269 (3-5). pp. 745-764.

Mohan , S and Rohatgi, PK (1979) Technology-assessment for development. In: Journal of Scientific & Industrial Research (JSIR), 38 (5). pp. 250-251.

Mohanty, A and Shaw, B and Pradeep, N and Singh, NK and Venkateswaran, K (2023) Exploring the Potential of Bacteriophages on Earth and Beyond. In: Journal of the Indian Institute of Science .

Mohanty, Atanu K and Chakraborty, Kanad and Chatterjee, Anindya (2007) A Combinatorial Optimization Problem for High Order PODs with Few Sensors. In: Journal of Vibration and Acoustics, 129 (2). pp. 252-255.

Mohite, SS and Kesari, Haneesh and Sonti, VR and Pratap, Rudra (2005) Analytical solutions for the stiffness and damping coefficients of squeeze films in MEMS devices with perforated back plates. In: Journal of Micromechanics and Microengineering, 15 (11). pp. 2083-2092.

Mohite, Suhas and Patil, Nishad and Pratap, Rudra (2006) Design, modelling and simulation of vibratory micromachined gyroscopes. In: International MEMS Conference 2006, MAY 09-12, 2006, Singapore, SINGAPORE, pp. 757-763.

Mohite, Suhas S and Sonti, Venkata R and Pratap, Rudra (2008) A Compact Squeeze-Film Model Including Inertia, Compressibility, and Rarefaction Effects for Perforated 3-D MEMS Structures. In: Journal of Microelectromechanical Systems, 17 (3). pp. 709-723.

Mondal, Manas Kumar and Das, Prosenjit and Karmakar, Nilabha and Banik, Nabanita (2017) Modelling of flow behaviour in a LD vessel by an impinging gas jet. In: PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 17 (3). pp. 159-171.

Mondal, RN and Govardhan, G (2007) Particle Image Velocimetry (PIV) and pressure measurements for supersonic flow over protrusions. In: Conference on Advances in Space Science and Technology (CASST'2007), , 29-31 January 2007, IISc, Bangalore.

Moronkeji, OE and Das, D and Lee, S and Chang, KM and Chasiotis, I (2023) Local electrical conductivity of carbon black/PDMS nanocomposites subjected to large deformations. In: Journal of Composite Materials .

Morse, TL and Govardhan, RN and Williamson, CHK (2008) The effect of end conditions on the vortex-induced vibration of cylinders. In: Journal of Fluids and Structures, 24 (8). pp. 1227-1239.

Mourya, Rahul and Chatterjee, Anindya (2008) Anomalous Frictional Behavior in Collisions of Thin Disks Revisited. In: Journal of Applied Mechanics, 75 (2). 024501-1-024501-3.

Mruthyunjaya, TS (1973) Graphical Method For Synthesis Of Crank-Links. In: Journal Of Mechanical Engineering Science, 15 (1). pp. 79-80.

Mruthyunjaya, TS (1973) Synthesis of plane linkages to generate functions of two variables using point position reductionâII. Sliding inputs and outputs. In: Mechanism and Machine Theory, 7 (4). pp. 399-405.

Mruthyunjaya, TS (1972) Synthesis of plane linkages to generate functions of two variables using point position reduction—II. Sliding inputs and outputs. In: Mechanism and Machine Theory, 7 (4). pp. 399-405.

Mruthyunjaya, TS (1972) Synthesis of plane linkages to generate functions of two variables using point-position reduction—Part 1. Rotary inputs and output. In: Mechanism and Machine Theory, 7 (3). pp. 363-370.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 1- Formulation. In: Mechanism and Machine Theory, 19 (6). pp. 487-495.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 2 - Application to several fully or partially known cases. In: Mechanism and Machine Theory, 19 (6). pp. 497-505.

Mruthyunjaya, TS (1984) A computerized methodology for structural synthesis of kinematic chains: Part 3 - application to the new case of 10-link, three- freedom chains. In: Mechanism and Machine Theory, 19 (6). pp. 507-530.

Mruthyunjaya, TS (1975) A note on synthesis of the general, two-degree-of-freedom linkage. In: Mechanism and Machine Theory, 10 (1). pp. 77-80.

Mruthyunjaya, TS and Balasubramanian, HR (1987) In quest of a reliable and efficient computational test for detection of isomorphism in kinematic chains. In: Mechanism and Machine Theory, 22 (2). pp. 131-139.

Mruthyunjaya, TS and Raghavan, MR (1984) Computer-aided analysis of the structure of kinematic chains. In: Mechanism and Machine Theory, 19 (3). pp. 357-368.

Mruthyunjaya, TS and Raghavan, MR (1979) Structural-analysis of kinematic chains and mechanisms based on matrix representation. In: Transactions of the ASME. Journal of Mechanical Design, 101 (3). pp. 488-494.

Mruthyunjaya, TS (1979) Structural synthesis by transformation of binary chains Strukturelle synthese durch umwandlung binaerer ketten. In: Mechanism and Machine Theory, 14 (4). pp. 221-231.

Mukherjee, NK and Munjal, ML (2009) Flow-acoustic analysis of diesel particulate filter. In: UNSPECIFIED, November 2009, Hyderabad.

Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.

Mukhopadhy, Ananya and Biswas, SK (1991) Indentation of sintered alumina clay composite - an experimental discussion of a combined Boussinesq and blister stress field approach. In: Philosophical Magazine Letters, 64 (2). pp. 77-82.

Mullagura, HN and Dash, S (2020) Bubble-Induced Rupture of Droplets on Hydrophobic and Lubricant-Impregnated Surfaces. In: Langmuir, 36 (30). pp. 8858-8864.

Munjal, ML (1997) Acoustic analysis and parametric studies of lagged pipes. In: Noise Control Engineering Journal, 45 (3). pp. 113-118.

Munjal, ML (1998) Acoustic lagging of pipes. In: Noise & Vibration Worldwide, 29 (11). pp. 14-16.

Munjal, ML (1990) Advances in the acoustics of flow ducts and mufflers. In: Sadhana, 15 (2). pp. 57-72.

Munjal, ML and Thawani, PT (1997) Acoustic analysis and design of compliant cable-hose systems. In: Noise Control Engineering Journal, 45 (6). pp. 235-242.

Munjal, ML and Thawani, PT (1997) Effect of protective layer on the performance of absorptive ducts. In: Noise Control Engineering Journal, 45 (1). pp. 14-18.

Munjal, ML (1998) Analysis and Desigh of Mufflers — An Overview of Research at the Indian Institute of Science. In: Indo-USA Symposium on Emerging Trends in Vibration and Noise Engineering, 18-20 March 1996, Delhi, India, pp. 425-433.

Munjal, ML (2003) Analysis and design of pod silencers. In: Journal of Sound and Vibration, 262 (3). pp. 497-507.

Munjal, ML (2009) Automotive noise control in India- State of the Art. In: All India Seminar on Active and Passive Noise Control, Institution of Engineers India, Guwahati, November 2009.

Munjal, ML (2006) Automotive noise scenario in 2005-06. In: Proceedings of ETIME 2006, Feb 2006, BMSCE, Bangalore.

Munjal, ML (2009) Glimpses of aeroacoustic activities in India. In: International Conference on Frontiers in Fluid Mechanics (ICFFM-09) Bangalore, September 2009, Bangalore.

Munjal, ML (2006) Muffler design for automotive engines. In: ICAME 2006 SRM University, 14-16 Dec 2006, Kattankulathur.

Munjal, ML (1988) On the cut‐on frequencies of a large round duct with azimuthal as well as radial partitions. In: Journal of the Acoustical Society of America, 84 (5). pp. 1936-1939.

Munjal, ML (1997) Plane wave analysis of side inlet/outlet chamber mufflers with mean flow. In: Applied Acoustics, 52 (2). pp. 165-175.

Munjal, ML (1998) Prediction of the break-out noise of the cylindrical sandwich plate muffler shells. In: Applied Acoustics, 53 (1-3). pp. 153-161.

Munjal, ML (2013) Recent advances in muffler acoustics. In: International Journal of Acoustics and Vibration, 18 (2). pp. 71-85.

Munjal, ML (1993) Response of a Multi-Layered Infinite Plate to an Oblique Plane Wave by Means of Transfer Matrices. In: Journal of Sound and Vibration, 162 (2). pp. 333-343.

Munjal, ML (2006) State of the art of the diesel engine and genset noise control. In: Workshop on Noise Control Measures for D.G. Sets, 15 Nov 2006, NPL, New Delhi.

Munjal, ML (2006) Technological measures for noise control. In: Workshop on Noise Pollution, 22 April 2006, New Delhi.

Munjal, ML (2020) Theory and Design of the Double-Tuned Coaxial and Flow-Reversal Mufflers: A New Perspective. In: Journal of The Institution of Engineers (India): Series C, 101 (4). pp. 619-629.

Munjal, ML (2009) Theory and design of tuned extended-tube chambers and concentric tube resonators. In: NSA, November 2009, Hyderabad.

Munjal, ML (2020) Tuning a two-chamber muffler for wide-band transmission loss. In: International Journal of Acoustics and Vibrations, 25 (2). pp. 248-253.

Munjal, ML (1975) Velocity ratio-cum-transfer matrix method for the evaluation of a muffler with mean flow. In: Journal of Sound and Vibration, 39 (1). pp. 105-119.

Munjal, ML (2001) An error inherent in the use of the two-microphone method for gas pulsation measurement in a reflective environment. In: Journal of Sound and Vibration, 242 (3). pp. 539-541.

Munjal, ML (1975) A rational synthesis of vibration isolators. In: Journal of Sound and Vibration, 39 (2). pp. 247-263.

Munjal, ML (1987) A simple numerical method for three-dimensional analysis of simple expansion chamber mufflers of rectangular as well as circular cross-section with a stationary medium. In: Journal of Sound and Vibration, 116 (1). pp. 71-88.

Munjal, ML and Behera, BK and Thawani, PT (1998) Transfer matrix model for the reverse-flow, three-duct, open end perforated element muffler. In: Applied Acoustics, 54 (3). pp. 229-238.

Munjal, ML and Doige, AG (1990) On the relation between convective source characteristics and their acoustic counterparts. In: Journal of Sound and Vibration, 136 (2). pp. 343-346.

Munjal, ML and Doige, AG (1989) On uniqueness, transfer and combination of acoustic sources in one-dimensional systems. In: Journal of Sound and Vibration, 128 (1). 165 -166.

Munjal, ML and Doige, AG (1990) Symmetry of one-dimensional dynamical systems in terms of transfer matrix parameters. In: Journal of Sound and Vibration, 136 (3). pp. 467-475.

Munjal, ML and Doige, AG (1990) Theory of a two source-location method for direct experimental evaluation of the four-pole parameters of an aeroacoustic element. In: Journal of Sound and Vibration, 141 (2). pp. 323-333.

Munjal, ML and Doige, AG (1990) The two-microphone method incorporating the effects of mean flow and acoustic damping. In: Journal of Sound and Vibration, 137 (1). pp. 135-138.

Munjal, ML and Doige, AG (1988) Authors reply to "On uniqueness, transfer and combination of acoustic sources in one-dimensional systems". In: Journal of Sound and Vibration, 121 (1). pp. 25-35.

Munjal, ML and Eriksson, LJ (1989) Analysis of a hybrid noise control system for a duct. In: Journal of the Acoustical Society of America, 86 (2). pp. 832-834.

Munjal, ML and Eriksson, LJ (1989) Analysis of a linear one-dimensional active noise control system by means of block diagrams and transfer functions. In: Journal of Sound and Vibration, 129 (3). pp. 443-455.

Munjal, ML and Gowtham, GSH and Venkatesham, B and Reddy, Hari Krishna M (2010) Prediction of breakout noise from an elliptical duct of finite length. In: Noise Control Engineering Journal (NCEJ), 58 (3). pp. 319-327.

Munjal, ML and Heckl, M (1982) Some mechanisms of excitation of a railway wheel. In: Journal of Sound and Vibration, 81 (4). pp. 477-489.

Munjal, ML and Heckl, M (1982) Vibrations of a periodic rail-sleeper system excited by an oscillating stationary transverse force. In: Journal of Sound and Vibration, 81 (4). pp. 491-500.

Munjal, ML and Krishnan, S and Reddy, MM (1993) Flow-Acoustic Performance of Perforated Element Mufflers With Application to Design. In: Noise Control Engineering Journal (NCEJ), 40 (1). pp. 159-167.

Munjal, ML and Kumar, KM (2023) State of the art of rational design of efficient mufflers. In: Noise Control Engineering Journal, 71 (3). pp. 169-179.

Munjal, ML and Mimani, A and Rao, PS (2009) A novel one-dimensional analysis of short end-chamber and expansion chamber mufflers. In: The Sixteenth International Conference on Sound and Vibration (ICSV16, July 2009.

Munjal, ML and Mukherjee, NK (2011) Plane wave analysis of rectangular axial-inlet, axial-outlet and transverse-inlet, transverse-outlet air cleaners. In: Noise Control Engineering Journal (NCEJ), 59 (5). pp. 447-463.

Munjal, ML and Narasimhan, MV and Sreenath, AV (1973) A rational approach to the synthesis of one-dimensional acoustic filters. In: Journal of Sound and Vibration, 29 (3). pp. 263-280.

Munjal, ML and Narayana, TSS (2006) A test element reversal method for measurement of acoustic four-pole parameters: theory and experiment. In: NSA 2006, 16-17 Nov 2006, NPL, New Delhi.

Munjal, ML and Prasad, MG (1986) On plane-wave propagation in a uniform pipe in the presence of a mean flow and a temperature gradient. In: Journal of the Acoustical Society of America, 80 (5). 1501 -1506.

Munjal, ML and Rao, KN and Sahasrabudhe, AD (1987) Aeroacoustic Analysis Of Perforated Muffler Components. In: Journal of Sound and Vibration, 114 (2). pp. 173-188.

Munjal, ML and Shirahatti, US (1987) Analysis of Lined Ducts With Mean Flow, With Application to Dissipative Mufflers. In: Journal of Vibration, Acoustics, Stress, and Reliability in Design, 109 . p. 367.

Munjal, ML and Sreenath, AV and Narasimhan, MV (1973) Velocity ratio in the analysis of linear dynamical systems. In: Journal of Sound and Vibration, 26 (2). pp. 173-191.

Munjal, ML and Thawani, PT (1996) Acoustic performance of hoses - A parametric study. In: Noise Control Engineering Journal (NCEJ), 44 (6). pp. 274-280.

Munjal, ML and Thawani, PT (1983) On the transfer matrix for a uniform tube with a moving medium. In: Journal of Sound and Vibration, 91 (4). pp. 597-599.

Munjal, ML and Thawani, PT (1997) Prediction of the vibro-acoustic transmission loss of planar hose-pipe systems. In: Journal of the Acoustical Society of America, 101 (1 part). pp. 2524-2535.

Munjal, ML and Vijayasree, NK and Chaitanya, P (2013) Flow resistance network analysis of the back-pressure of automotive mufflers. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 20 (5). pp. 339-349.

Munjal, ML and Vinay, J (1998) Acoustic performance of flexible bellows. In: Journal of the Acoustical Society of America, 104 (4). p. 2040.

Munuswamy, N and Govardhan, RN (2022) Shock wave boundary layer interactions in sonic gas jet injection into supersonic crossflow. In: Experiments in Fluids, 63 (9).

Munuswamy, Nithiyaraj and Govardhan, Raghuraman N (2017) Particle Image Velocimetry Study of Sonic Jet Injected into Supersonic Crossflow. In: 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, DEC 12-14, 2014, Indian Inst Technol Kanpur, Kanpur, INDIA, pp. 177-184.

Murali, S and Arvind, TS and Raman, KS and Murthy, KSS (1997) Fatigue properties of sand cast, stircast and extruded Al-7Si-0.3 Mg alloy with trace additions of Be and Mn. In: Materials Transactions, JIM, 38 (1). pp. 28-36.

Murali, S and Muthukkaruppan, S and Raman, KS and Murthy, KSS (1997) Stir cast and extruded Al-7Si-0.3Mg alloy containing iron and beryllium. In: Materials Science and Technology, 13 (4). pp. 337-442.

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1996) Development of electropolishing techniques on metals and alloys. In: Praktische Metallographie, 33 (7). pp. 359-368.

Murali, MG and Rao, Arun D and Yadav, Sarita and Ramamurthy, Praveen C (2015) Narrow band gap conjugated polymer for improving the photovoltaic performance of P3HT:PCBM ternary blend bulk heterojunction solar cells. In: POLYMER CHEMISTRY, 6 (6). pp. 962-972.

Murali, P and Guo, TF and Zhang, YW and Narasimhan, R and Li, Y and Gao, HJ (2011) Atomic Scale Fluctuations Govern Brittle Fracture and Cavitation Behavior in Metallic Glasses. In: Physical Review Letters, 107 (21).

Murali, P and Narasimhan, R and Guo, TF and Zhang, YW and Gao, HJ (2013) Shear bands mediate cavitation in brittle metallic glasses. In: SCRIPTA MATERIALIA, 68 (8). pp. 567-570.

Murali, S and Arunkumar, Y and Chetty, PVJ and Raman, KS and Murthy, KSS (1997) The effect of preaging on the delayed aging of Al-7Si-0.3Mg. In: Journal of the Minerals Metals & Materials Society (JOM), 49 (2). pp. 29-33.

Murali, S and Kashyap, KT and Raman, KS and Murthy, KSS (1993) Inhibition of delayed ageing by trace additions in Al---7Si---0.3Mg cast alloy. In: Scripta Metallurgica et Materialia, 29 (11). 1421-1426 .

Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1997) Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchloric and Nitric Acid Electrolytes. In: Materials Characterization, 38 (4-5). pp. 273-286.

Murali, S and Raman, KS and Murthy, KSS (1996) A1-7Si-0.3Mg cast alloy: Formation and crystal structure of beta-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 phases. In: 5th International Conference on Aluminium Alloys - Their Physical and Mechanical Properties (ICAA5), JUL 01-05, 1996, GRENOBLE, FRANCE.

Murali, S and Raman, KS and Murthy, KSS (1995) The formation of ?-FeSiAl5 and Be---Fe phases in Al---7Si---0.3Mg alloy containing Be. In: Materials Science and Engineering A, 190 (1-2). pp. 165-172.

Murali, S and Trivedi, A and Shamanna, KS and Murthy, KSS (1996) Effect of iron and combined iron and beryllium additions on the fracture toughness and microstructures of squeeze-cast Al-7Si-0.3Mg alloy. In: Journal of Materials Engineering and Performance, 5 (4). pp. 462-468.

Muralidhar, Nischal and Himabindu, M and Ravikrishna, RV (2018) Modeling of a hybrid electric heavy duty vehicle to assess energy recovery using a thermoelectric generator. In: ENERGY, 148 . pp. 1046-1059.

Murthy, MVVS and Gopalakrishnan, S and Nair, PS (2007) A New Locking Free Higher Order Finite Element Formulation for Composite Beams. In: Computers, Materials & Continua, 5 (1). pp. 43-62.

Murthy, VSR and Seshan, S and Kishore, * (1984) Characteristics of compacted graphite cast iron. In: Transactions of the American Foundrymen's Society, 92 . pp. 373-380.

Murthy, VSR and Seshan, S and Kishore, * (1987) Fractographic features of C.G.iron subjected to tension and fatigue. In: Microstructural Sciences, 15 . pp. 123-138.

Murthy, ASV and Narasimhan, R and Varghese, S (2005) An asymptotic analysis of a simple model for the structure and dynamics of the Ramdas layer. In: Pure and Applied Geophysics (PAGEOPH), 162 (10). pp. 1831-1857.

Murthy, Dakshina HB and Raghavan, MR (1972) Compliance of rough cylinders in compression. In: Wear, 20 (3). pp. 353-369.

Murthy, HB Dakshina and Raghavan, MR (1974) The real area of contact and compliance of rough cylinders in compression. In: Wear, 27 (1). pp. 47-60.

Murthy, N Srinivasa and Rao, P Raghavendra (1985) Photoelastic parametric studies of mode I stress intensity factors. In: Engineering Fracture Mechanics, 22 (3). pp. 527-532.

Murthy, NS and Rakesh, N and Srinath, LS (1983) Effect of specimen thickness on mode I stress intensity factor in photoelastic investigations. In: Engineering Fracture Mechanics, 18 (6). pp. 1201-1205.

Murthy, Srinivasa N and Rao, Raghavendra P (1985) Determination of mode 1 notch stress intensity factor by the photoelastic technique. In: Engineering Fracture Mechanics, 21 (3). pp. 557-562.

Murthy, Srinivasa N and Rao, Raghavendra P (1984) Photoelastic determination of mode i stress intensity factor in tensile strips—effect of crack length. In: Engineering Fracture Mechanics, 20 (3). pp. 475-478.

Murthy, Srinivasa S and Ho, Clifford and Dutta, Pradip (2016) Special issue: Solar Energy Research Institute for India and the United States (SERIIUS) - Concentrated Solar Power. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 829-830.

Murthy, VSR and Seshan, S and Seshan, K (1985) Vermicular graphite cast iron current state of the art. In: Sadhana-Academy Proceedings in Engineering Sciences, 8 (Octobe). pp. 361-372.

Murty, CVS and Richter, W and Murthy, MVK (1989) Modeling Of Thermal-Radiation In Fired Heaters. In: Chemical Engineering Research and Design, 67 (2). pp. 134-144.

Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V (2019) Influence of Tool Traverse Speed on Structure, Mechanical Properties, Fracture Behavior, and Weld Corrosion of Friction Stir Welded Joints of Aluminum and Stainless Steel. In: ADVANCED ENGINEERING MATERIALS, 21 (2).

Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V and Chatterjee, Subrata (2018) Interfacial Microstructure and Mechanical Properties of Friction Stir Welded Joints of Commercially Pure Aluminum and 304 Stainless Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (6, SI). pp. 2921-2931.

Murugan, J N and Govardhan, R N (2020) Study of shock wave-boundary layer interaction using high-speed Schlieren imaging. In: Journal of Flow Visualization and Image Processing, 27 (2). pp. 185-197.

Murugan, JN and Govardhan, RN (2021) Observation of Low-Frequency Shock Oscillation Over a Forward-Facing Step. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicles, SAROD 2018, 29 Nov - 01 Dec 2018, Bengaluru; India, pp. 219-226.

Murugan, Jayaprakash N and Govardhan, Raghuraman N (2016) Shock wave-boundary layer interaction in supersonic flow over a forward-facing step. In: JOURNAL OF FLUID MECHANICS, 807 . pp. 258-302.

Murugan, Jayaprakash N and Govardhan, Raghuraman N (2017) Study of Shock Wave/Turbulent Boundary Layer Interaction over a Forward-Facing Step. In: 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, DEC 12-14, 2014, Indian Inst Technol Kanpur, Kanpur, INDIA, pp. 63-71.

Murugan, S and Mada, Sankaraiah and Munjal, ML (2009) Cockpit noise reduction using mufflers and silencers in a fighter aircraft. In: UNSPECIFIED, November 2009.

Muthukamarasamy, S and Seshan, S (1993) Microstructural features of ZA-27 alloy based particulate reinforced metal matrix composites. In: Metals Materials and Processes, 5 (2). pp. 107-110.

Muthukumar, M and Bobji, MS (2018) Effect of micropillar surface texturing on friction under elastic dry reciprocating contact. In: MECCANICA, 53 (9). pp. 2221-2235.

Muthukumar, M and Bobji, MS and Simha, KRY (2021) Needle insertion-induced quasiperiodic cone cracks in hydrogel. In: Soft Matter, 17 (10). pp. 2823-2831.

Muthukumar, M and Yadav, A and Bobji, MS (2020) Wear characteristics of nanoporous alumina and copper filled nanocomposite coatings. In: Wear, 462-46 .

Muthukumar, R and Raghavan, MR (1987) Estimation of gear tooth deflection by the finite element method. In: Mechanism and Machine Theory, 22 (2). pp. 177-181.

Muthukumarasamy, S and Guruprasad, A and Sudhakar, A and Seshan, S (1996) The Performance of Zinc Alloy Based Metal Matrix Composites Produced Through Squeeze Casting. In: Materials and Manufacturing Processes, 11 (3). pp. 351-366.

Muthukumarasamy, S and Seshan, S (1996) Structure and properties of fibre reinforced zn-27% al alloy based cast MMCs. In: Composites, 26 (5). pp. 387-393.

Muthuraju, NP and Gowda, BS and Narasimham, GSVL and Gurudatt, HM (2022) Experimental Investigation of InTube Condensation of HFO-1234yf. In: Journal of Mines, Metals and Fuels, 70 (10). pp. 389-395.

N

Nadammal, Naresh and Kailas, Satish V and Suwas, Satyam (2015) A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy. In: MATERIALS & DESIGN, 65 . pp. 127-138.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. In: JOM, 67 (5). pp. 1014-1021.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2017) Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4247-4261.

Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.

Nadge, P and Govardhan, R (2012) Evolution of coherent vortical structures in turbulent flow over backward-facing step. In: 65th Annual Meeting of the APS Division of Fluid Dynamics, November 18-20, 2012, San Diego, CA.

Nadge, PM and Govardhan, RN (2011) Flow over a Backward Facing Step: Mean separation bubble and spanwise structure. In: 2011 IUTAM Symposium on Bluff Body Flows, Blubof 2011, 12 December 2011through 16 December 2011, Kanpur, pp. 124-127.

Nagaraj, H S and Hariharan, R (1973) Flow-graph techniques for epicyclic gear train analysis. In: International Journal of Control,, 17 (2). 263 -272.

Nagaraj, HS and Gurumoorthy, B (2002) Machinable volume extraction for automatic process planning. In: IIE Transactions, 34 (4). pp. 393-410.

Nagaraj, HS and Hariharan, Ramesh (1973) step-up epicyclic gear-train and flowgraph analysis. In: International Journal of Control, 17 (5). pp. 1059-1063.

Nagaraj, BP and Nataraju, BS (1997) Dynamics Of A Two-Link Flexible System Undergoing Locking: Mathematical Modelling And Comparison With Experiments. In: Journal of Sound and Vibration, 207 (4). pp. 567-589.

Nagaraj, BP and Pandiyan, R and Ghosal, Ashitava (2010) A constraint Jacobian based approach for static analysis of pantograph masts. In: Computers & Structures, 88 (1-2). pp. 95-104.

Nagaraj, BP and Pandiyan, R and Ghosal, Ashitava (2009) Kinematics of pantograph masts. In: Mechanism and Machine Theory, 44 (4). pp. 822-834.

Nagaraj, HS and Hariharan, R (1973) Solution of a class of vibration problems by flowgraph methods. In: International Journal of Control, 17 (3). pp. 577-586.

Nagaraj, K and Ramkumar, K (1984) Static RAM cell for ternary logic. In: Proceedings of the IEEE, 72 (2). pp. 227-228.

Nagarajan, VS and Muthu, DVS and Asif, Syed SA and Sood, AK and Biswas, SK (1994) Raman spectroscopic studies of phase transformations induced by a notch cut on a 3Y-TZP sample. In: Materials Science & Engineering A, 174 (2). L37-L40.

Nagendra, HR (1973) Effect of inclination on laminar film condensation. In: Applied Scientific Research, 28 (1). pp. 261-277.

Nagendra, HR and Tirunarayanan, MA (1971) Free convection heat transfer between vertical parallel plates. In: Nuclear Engineering and Design, 15 . pp. 17-28.

Nagendra, HR and Tirunarayanan, MA (1970) Laminar film condensation from nonisothermal vertical flat plates. In: Chemical Engineering Science, 25 (6). pp. 1073-1079.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1969) Free convection heat transfer from vertical cylinders and wires. In: Chemical Engineering Science, 24 (9). pp. 1491-1495.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1971) Free convection heat transfer from vertical cylinders part I: Power law surface temperature variation. In: Nuclear Engineering and Design, 16 (2). pp. 153-162.

Nagendra, HR and Tirunarayanan, MA and Ramachandran, A (1971) Free convection heat transfer from vertical cylinders part II: Exponential surface temperature variation. In: Nuclear Engineering and Design, 16 (2). pp. 163-168.

Naidu, DP and Dash, S (2022) Impact dynamics of air-in-liquid compound droplets. In: Physics of Fluids, 34 (7).

Naidu, DVP and Rajan, R and Kumar, R and Gandhi, KS and Arakeri, VH and Chandrasekaran, S (1994) Modelling of a batch sonochemical reactor. In: Chemical Engineering Science, 49 (6). 877-888 .

Naidu, Prasad DV and Rajan, R and Kumar, R and Gandhi , KS and Arakeri, VH (1994) Modelling of a batch sonochemical reactor. In: Chemical Engineering Science, 49 (6). pp. 877-888.

Nair, N and Akshaya, AAV and Joseph, J (2022) An In-Situ Soil pH Sensor With Solid Electrodes. In: IEEE Sensors Letters, 6 (8).

Nair, N and Sankapal, BR (2023) 0D, 1D, 2D, and 3D Structured Chalcogenides for Supercapacitor Applications. [Book Chapter]

Nair, Prapanch and Tomar, Gaurav (2019) Simulations of gas-liquid compressible-incompressible systems using SPH. In: COMPUTERS & FLUIDS, 179 . pp. 301-308.

Nair, Prapanch and Tomar, Gaurav (2015) Volume conservation issues in incompressible smoothed particle hydrodynamics. In: JOURNAL OF COMPUTATIONAL PHYSICS, 297 . pp. 689-699.

Nair, Prapanch and Tomar, Gaurav (2014) An improved free surface modeling for incompressible SPH. In: COMPUTERS & FLUIDS, 102 . pp. 304-314.

Nair, Prapanch and Tomar, Gaurav (2017) A study of energy transfer during water entry of solids using incompressible SPH simulations. In: Sādhanā, 42 (4). pp. 517-531. ISSN 0256-2499

Nalama, PC and Sarinb, R and Biswasa, SK (2006) Dry sliding tribology of dioctyldithiophosphoric acid deposited on steel at $150{^o}$C. In: Tribology Letters, 23 (3). pp. 231-241.

Nallasamy, M and Prasad, K Krishna (1974) Numerical studies on quasilinear and linear elliptic equations. In: Journal of Computational Physics, 15 (4). pp. 429-448.

Nallasamy, M and Prasad, Krishna K (1977) On cavity flow at high Reynolds numbers. In: Journal of Fluid Mechanics, 79 (02). pp. 391-414.

Nampoothiri, KN and Bobji, MS and Sen, P (2020) De-Icing Device with Self-Adjusting Power Consumption and Ice Sensing Capabilities. In: Journal of Microelectromechanical Systems, 29 (4). pp. 562-570.

Nampoothiri, Krishnadas Narayanan and Seshasayee, Mahadevan Subramanya and Srinivasan, Vinod and Bobji, MS and Sen, Prosenjit (2018) Direct heating of aqueous droplets using high frequency voltage signals on an EWOD platform. In: SENSORS AND ACTUATORS B-CHEMICAL, 273 . pp. 862-872.

Nampoothiri, Krishnadas Narayanan and Srinivasan, Vinod and Bobji, MS and Sen, Prosenjit (2017) A NOVEL SUB-PICOLITER MONODISPERSED DROPLET GENERATION DEVICE BASED ON LIQUID DIELECTROPHORESIS. In: 30th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), JAN 22-26, 2017, Las Vegas, NV, pp. 87-90.

Nandakumar, K and Wahi, Pankaj and Chatterjee, Anindya (2009) Infinite Dimensional Slow Modulations In A Delayed Model For Orthogonal Cutting Vibrations. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 665-672.

Nandakumar, K and Chatterjee, Anindya (2009) Continuation of limit cycles near saddle homoclinic points using splines in phase space. In: Nonlinear Dynamics, 57 (3). pp. 383-399.

Nandakumar, K and Chatterjee, Anindya (2005) Higher-Order Pseudoaveraging via Harmonic Balance for Strongly Nonlinear Oscillations. In: Journal of Vibration and Acoustics, 127 (4). pp. 416-419.

Nandakumar, K and Chatterjee, Anindya (2010) Nonlinear secondary whirl of an overhung rotor. In: Proceedings of the royal society a-mathematical physical and engineering sciences, 466 (2113). pp. 283-301.

Nandakumar, K and Chatterjee, Anindya (2005) Resonance, parameter estimation, and modal interactions in a strongly nonlinear benchtop oscillator. In: Nonlinear Dynamics, 40 (2). pp. 149-167.

Nandakumaran, K and Wahi, Pankaj and Chatterjee, Anindya (2010) Infinite dimensional slow modulations in a well known delayed model for cutting tool vibrations. In: Nonlinear Dynamics, 62 (4). pp. 705-716.

Nandy, Arup and Jog, C S (2018) A monolithic finite-element formulation for magnetohydrodynamics. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 43 (9).

Nandy, Arup and Jog, CS (2016) An amplitude finite element formulation for electromagnetic radiation and scattering. In: COMPUTERS & MATHEMATICS WITH APPLICATIONS, 71 (7). pp. 1364-1391.

Nandy, Arup Kumar and Jog, CS (2012) Optimization of vibrating structures to reduce radiated noise. In: Structural and Multidisciplinary Optimization, 45 (5). pp. 717-728.

Narasimhan, MV and Adinarayan, TV (1990) Evaluation of Displacement - Time Characteristics of Stirling Engine Drive Mechanisms - II. In: Proceedings of the 25th Intersociety Energy Conversion Engineering Conference, 1990. IECEC-90, 12-17 Aug. 1990, Reno, NV, USA, pp. 336-340.

Narasimhan, Arun Kumar and Wickramaratne, Chatura and Kamal, Rajeev and Singh, Punit and Goswami, DY (2017) INTEGRATION OF ORGANIC RANKINE CYCLE AND SCROLL EXPANDER MODELS FOR EFFECTIVE DESIGN AND PERFORMANCE USING ORGANIC WORKING FLUIDS. In: 11th ASME International Conference on Energy Sustainability, JUN 26-30, 2017, Charlotte, NC.

Narasimhan, Arunn and Reddy, BVK and Dutta, Pradip (2012) Thermal management using the bi-disperse porous medium approach. In: International Journal of Heat and Mass Transfer, 55 (4). pp. 538-546.

Narasimhan, R (2004) Analysis of indentation of pressure sensitive plastic solids using the expanding cavity model. In: Mechanics of Materials, 36 (7). pp. 633-645.

Narasimhan, R (1994) A Numerical Study of Fracture Initiation in a Ductile Material Containing a Dual Population of Second-Phase Particles-I. Static Loading. In: Engineering Fracture Mechanics, 47 (6). pp. 919-934.

Narasimhan, R (1994) A numerical study of fracture initiation in a ductile material containing a dual population of second-phase particles-II. Dynamic loading. In: Engineering Fracture Mechanics, 47 (6). pp. 935-948.

Narasimhan, R and Basu, S (1999) Numerical simulations of fracture initiation in ductile solids under mode I, dynamic loading. In: Bulletin of Materials Science, 22 (5). pp. 891-900.

Narasimhan, R and Biswas, SK (1998) A finite element study of the indentation mechanics of an adhesively bonded layered solid. In: International Journal of Mechanical Sciences, 40 (4). pp. 357-370.

Narasimhan, R and Dutta, T and Singh, I (2019) Plastic Deformation and Failure Mechanisms in Notched Nano-Scale Metallic Glass Specimens. [Book Chapter]

Narasimhan, R and Singh, I and Shete, M (2017) Ductility enhancement strategies in bulk metallic glasses: Insights from finite element simulations. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 239-240.

Narasimhan, R and Subramanya, HY and Patil, SD and Tandaiya, Parag and Ramamurty, U (2009) Stationary crack tip fields in elastic-plastic solids: an overview of recent numerical simulations. In: Journal Of Physics D-Applied Physics, 42 (21). 214005-1-214005-15.

Narasimhan, R and Tandaiya, Parag and Singh, I and Narayan, RL and Ramamurty, U (2015) Fracture in metallic glasses: mechanics and mechanisms. In: INTERNATIONAL JOURNAL OF FRACTURE, 191 (1-2, S). pp. 53-75.

Narasimhappa, P and Varshney, R and Singh, S and Kumar Naik, TS and Ramamurthy, PC (2023) 3D rhombohedral microcrystals metal-organic frameworks for electrochemical and fluorescence sensing of tetracycline. In: Chemosphere, 333 .

Narayan, GA and Nalluri, SRPR and Gurumoorthy, B (1997) Feature-based geometric reasoning for process planning. In: Sadhana-Academy Proceedings In Engineering Sciences, 22 (Part 2). pp. 217-240.

Narayan, Manish and Surappa, MK and Bai, Pramila BN (1995) Dry sliding wear of Al alloy 2024-Al203 particle metal matrix composites. In: Wear, 181 (part 2). pp. 563-570.

Narayan, RL and Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2014) Wallner lines, crack velocity and mechanisms of crack nucleation and growth in a brittle bulk metallic glass. In: ACTA MATERIALIA, 80 . pp. 407-420.

Narayan, Shankar S and Nair, PS and Ghosal, Ashitava (2008) Dynamic interaction of rotating momentum wheels with spacecraft elements. In: Journal of Sound and Vibration, 315 (4-5). pp. 970-984.

Narayana, TSS and Munjal, ML (2005) Prediction and measurement of the four-pole parameters of a muffler including higher order mode effects. In: Noice Control Engineering Journal, 53 (6). pp. 240-246.

Narayana Rao, K and Munjal, ML (1986) Noise reduction with perforated three-duct muffler components. In: Sadhana : Academy Proceedings in Engineering Sciences, 9 (4). pp. 255-269.

Narchail, S and Ahmad, SS and Srivatsa, S and Kumar, P and Narayanan, G (2019) Experimental Vibration Studies on a Solid-Rotor Switched Reluctance Machine. In: 2019 National Power Electronics Conference (NPEC), 13-15 Dec. 2019, Tiruchirappalli, India.

Narchail, S and Urabinahatti, C and Srivatsa, S and Patel, A and Ahmad, SS and Kumar, P and Narayanan, G (2019) Experimental Investigations on a High-Speed Rotor for a Switched Reluctance Machine. In: 8th IEEE India International Conference on Power Electronics, IICPE 2018, 13-15 December 2018, Jaipur.

Narendar, S and Gupta, SS and Gopalakrishnan, S (2011) Longitudinal Magnetic Field Effect on Nonlocal Ultrasonic Vibration Analysis of Single-Walled Carbon Nanotubes Based on Wave Propagation Approach. In: Advanced Science Letters, 4 (11-12). pp. 3382-3389.

Narendar, S and Gupta, SS and Gopalakrishnan, S (2012) Wave propagation in single-walled carbon nanotube under longitudinal magnetic field using nonlocal Euler-Bernoulli beam theory. In: APPLIED MATHEMATICAL MODELLING, 36 (9). pp. 4529-4538.

Narendra, M and Arya, BN and Jayanth, GR (2023) An electromagnetically actuated ball and socket joint for applications in 3D metrology. In: Journal of Micromechanics and Microengineering, 33 (1).

Nath, Pandari S and Pratap, Rudra (1999) Frequency shift analysis for comb drive structures. In: SPIE:Indo-Russian Workshop on Micromechanical Systems, Vol.3903, 2-4 Febrauary 1999, New Delhi, India, pp. 45-58.

Nath, Deo and Biswas, SK and Rohatgi, PK (1980) Wear characteristics and bearing performance of aluminium-mica particulate composite material. In: Wear, 60 (1). pp. 61-73.

Nath, Deo and Bhatt, RT and Biswas, SK (1980) Mechanical Properties of Al-Mica Particulate Composite Material. In: Journal of Engineering Materials and Technology, 102 (1). pp. 78-84.

Naveen Kumar, M and Gurumoorthy, B (2020) Design of porous structures. In: Computer-Aided Design and Applications, 18 (4). pp. 704-713.

Nayak, Arvind and Handral, Poornakanta and Rangarajan, Ramsharan (2019) Shape Control for the Elastica Through Load Optimization. In: JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 86 (1).

Nayak, KC and Saha, SK and Srinivasan, K and Dutta, P (2006) A numerical model for heat sinks with phase change materials and thermal conductivity enhancers. In: International Journal of Heat and Mass Transfer, 49 (11). pp. 1833-1844.

Nayak, Kali Charan and Dutta, Pradip (2016) Numerical Investigations for Leakage and Windage Heating in Straight-Through Labyrinth Seals. In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 138 (1).

Nayana, KO and Ranganatha, S and Shubha, HN and Pandurangappa, M (2019) Effect of sodium lauryl sulphate on microstructure, corrosion resistance and microhardness of electrodeposition of Ni-Co3O4 composite coatings. In: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 29 (11). pp. 2371-2383.

Nellas, I and Iyer, KV and Iglesias-Artola, JM and Pippel, M and Nadler, A and Eaton, S and Dye, NA (2022) Hedgehog signaling can enhance glycolytic ATP production in the Drosophila wing disc. In: EMBO Reports .

Nipin, L and Tomar, Gaurav (2015) Effect of viscosity contrast on plume formation in density stratified fluids. In: CHEMICAL ENGINEERING SCIENCE, 134 . pp. 510-520.

Nisanth, MS and Panda, PP and Ravikrishna, RV (2022) Performance Evaluation of a Trapped Vortex Combustor Configuration Using RANS Simulations. In: AIAA Science and Technology Forum and Exposition, 3-7 Jan 2022, San Diego.

Noor El-Din, MR and Mishrif, Marwa R and Kailas, Satish V and Suvin, PS and Mannekote, Jagadeesh K (2018) Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid. In: INDUSTRIAL LUBRICATION AND TRIBOLOGY, 70 (9). pp. 1569-1579.

O

Oellrich, LR and Leisenheimer, B and Srinivasan, K (1997) Flammability behavior of (octafluoropropane plus propane) and (octafluoropropane plus methane). In: Chemie Ingenieur Technik, 69 (7). pp. 984-986.

Omprakash, S and Narasimhan, R (1996) A finite element analysis of mode III quasi-static crack growth at a ductile-brittle interface. In: Transactions of the ASME: Journal of Applied Mechanics, 63 (1). pp. 204-209.

Ortega, Jesus and Khivsara, Sagar and Christian, Joshua and Ho, Clifford and Dutta, Pradip (2016) Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Structural and creep-fatigue evaluation. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 979-987.

Ortega, Jesus and Khivsara, Sagar and Christian, Joshua and Ho, Clifford and Yellowhair, Julius and Dutta, Pradip (2016) Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Optical and thermal-fluid evaluation. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 970-978.

Ortega, Jesus D and Khivsara, Sagar D and Christian, Joshua M and Dutta, Pradip and Ho, Clifford K (2018) ON-SUN TESTING OF A HIGH TEMPERATURE BLADED SOLAR RECEIVER AND TRANSIENT EFFICIENCY EVALUATION USING AIR. In: 12th ASME International Conference on Energy Sustainability, June 24-28, 2018, Lake Buena Vista, FL, USA.

Ortega, Jesus D and Khivsara, Sagar D and Christian, Joshua M and Ho, Clifford K (2015) DESIGN REQUIREMENTS FOR DIRECT SUPERCRITICAL CARBON DIOXIDE RECEIVER DEVELOPMENT AND TESTING. In: 9th ASME International Conference on Energy Sustainability, JUN 28-JUL 02, 2015, San Diego, CA.

Ortega, Jesus D and Khivsara, Sagar D and Christian, Joshua M and Yellowhair, Julius E and Ho, Clifford K (2015) COUPLED OPTICAL-THERMAL-FLUID MODELING OF A DIRECTLY HEATED TUBULAR SOLAR RECEIVER FOR SUPERCRITICAL CO2 BRAYTON CYCLE. In: 9th ASME International Conference on Energy Sustainability, JUN 28-JUL 02, 2015, San Diego, CA.

P

Paddillaya, N and Ingale, K and Gaikwad, C and Saini, DK and Pullarkat, P and Kondaiah, P and Menon, GI and Gundiah, N (2022) Cell adhesion strength and tractions are mechano-diagnostic features of cellular invasiveness. In: Soft Matter, 18 (23). pp. 4378-4388.

Paddillaya, N and Mishra, A and Kondaiah, P and Pullarkat, P and Menon, GI and Gundiah, N (2019) Biophysics of Cell-Substrate Interactions Under Shear. In: Frontiers in Cell and Developmental Biology, 7 .

Padmanabha, D and Nair, BG and Ramachandran, A (1970) Effect of vertical vibration on mass transfer from spheres. In: Indian Journal of Technology, 8 (7). pp. 243-247.

Pai, BC and Rohatgi, PK (1978) Production of cast aluminium-graphite particle composites using a pellet method. In: Journal of Materials Science, 13 (2). pp. 329-335.

Pai, Verneker VR and Rao, Rama Mohana J (1982) Effect of Prior Ultraviolet Irradiation on Thermal Decomposition and Ignition of Coal. In: Combustion Science and Technology, 29 (1-2). pp. 95-100.

Pal, D and Chakraborty, S and Dutta, P and Bhattachary, J (2006) An Enthalpy-Based Micro-scale Model for Dendritic Solidification. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Palanisamy, Dhanalakshmi and Singh, Shailesh and Srivastava, Chandan and Madras, Giridhar and Chattopadhyay, Kamanio (2016) Predicting Pathways for Synthesis of Ferromagnetic tau Phase in Binary Heusler Alloy Al-55 pct Mn Through Understanding of the Kinetics of epsilon-tau Transformation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (12). pp. 6555-6568.

Palaparthy, Vinay S and Mondal, Somenath and Singh, Devendra N and Baghini, Maryam Shojaei and Ananthasuresh, GK (2018) Effect of spatial variations and desiccation cracks on the DPHP and MPHP sensors. In: SENSORS AND ACTUATORS A-PHYSICAL, 279 . pp. 638-648.

Palathingal, Safvan and Ananthasuresh, G K (2019) Analysis and Design of Fixed-Fixed Bistable Arch-Profiles Using a Bilateral Relationship. In: JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 11 (3).

Palathingal, Safvan and Ananthasuresh, G K (2019) Analytical modelling of spatial deformation pathways in planar and spatial shallow bistable arches. In: PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 475 (2227).

Palathingal, Safvan and Ananthasuresh, GK (2017) Design of Bistable Pinned-Pinned Arches with Torsion Springs by Determining Critical Points. In: 4th IFToMM Asian Conference on Mechanism and Machine Science (IFToMM Asian MMS) / International Conference on Mechanism and Machine Science (CCMMS), DEC 15-17, 2016, Guangzhou, PEOPLES R CHINA, pp. 677-688.

Palathingal, Safvan and Ananthasuresh, GK (2017) Design of bistable arches by determining critical points in the force-displacement characteristic. In: MECHANISM AND MACHINE THEORY, 117 . pp. 175-188.

Palathingal, Safvan and Ananthasuresh, GK (2018) A bilateral relationship between stable profiles of pinned-pinned bistable shallow arches. In: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 143 . pp. 183-193.

Palliyalil, AC and Mohan, A and Dash, S and Tomar, G (2024) Ion-Specific Bubble Coalescence Dynamics in Electrolyte Solutions. In: Langmuir, 40 (1). pp. 1035-1045.

Paman, Ashish and Rangarajan, Ramsharan (2019) A Variational Approach to Registration with Local Exponential Coordinates. In: COMPUTER GRAPHICS FORUM, 38 (1). pp. 482-506.

Panda, Ajay Kumar and Bobji, MS (2018) Design of High Stiffness Inertial Slider for In-Situ TEM. In: International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), JUL 04-08, 2018, Nagoya, JAPAN.

Panda, Sushree Sangeeta and Gangolu, Appa Rao (2017) Study of Dowel Action in Reinforced Concrete Beam by Factorial Design of Experiment. In: ACI Structural Journal, 114 (6). pp. 1495-1505. ISSN 0889-3241

Pandey, Ashok K and Pratap, Rudra (2007) Modelling the Effect of Residual Stress and Perforations on the Dynamic Characteristics of MEMS Devices. In: Advances in Vibration Engineering .

Pandey, AK and Pratap, R (2007) Squeeze Film Damping in Perforated MEMS Torsion Mirror. In: International conference on Emerging Mechanical Technology MACRO TO NANO (EMTM2N-2007), , 16-18 February 2007, BITS Pilani.

Pandey, AK and Pratap, R and Chau, FS (2007) Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime. In: Experimental Mechanics .

Pandey, AK and Pratap, R and Chau, Fook Siong (2007) Experimental Study of Fluid Damping in Micro Devices with Flow Ranging from Continuum to Molecular Regime. In: MOEMS-MEMS 2007 Micro and Nanofabrication, , 2007, San Jose, CA.

Pandey, Ashok K and Pratap, Rudra (2003) Studies in Nonlinear Effects of Squeeze Film Damping in MEMS Structures. In: International Journal of Computational Engineering Science, 4 (3). pp. 477-480.

Pandey, Ashok Kumar and Pratap, Rudra (2007) Effect of flexural modes on squeeze film damping in MEMS cantilever resonators. In: Journal of Micromechanics and Microengineering, 17 (12). pp. 2475-2484.

Pandey, Ashok Kumar and Pratap, Rudra (2007) A comparative study of analytical squeeze film damping models in rigid rectangular perforated MEMS structures with experimental results. In: Microfluidics and Nanofluidics, 4 (3). pp. 205-218.

Pandey, Ashok Kumar and Pratap, Rudra (2008) A semi-analytical model for squeeze-film damping including rarefaction in a MEMS torsion mirror with complex geometry. In: Journal of Micromechanics and Microengineering, 18 (10). 105003-1-105003-12.

Pandey, Ashok Kumar and Pratap, Rudra and Chau, Fook Siong (2007) Analytical solution of the modified Reynolds equation for squeeze film damping in perforated MEMS structures. In: Sensors and Actuators A: Physical, 135 (2). pp. 839-848.

Pandey, Ashok Kumar and Pratap, Rudra and Chau, Fook Siong (2004) Coupled nonlinear effects of surface roughness and rarefaction on squeeze film damping in MEMS structures. In: Journal of Micromechanics and Microengineering, 14 (10). pp. 1430-1437.

Pandey, Ashok Kumar and Venkatesh, KP and Pratap, Rudra (2009) Effect of metal coating and residual stress on the resonant frequency of MEMS resonators. In: Sadhana-Academy Proceedings In Engineering Sciences, 34 (4). pp. 651-661.

Pandey, Ashok kumar and Pratap, Rudra and Chau, Fook Siong (2007) Influence of Boundary Conditions on the Dynamic Characteristics of Squeeze Films in MEMS Devices. In: Journal of Microelectromechanical Systems, 16 (4). pp. 893-903.

Pandey, K and Basu, S (2019) Atomisation and combustion characteristics of high-vapour pressure nanofuel droplets. In: 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 1 July - 5 July 2019, Fukuoka.

Pandey, K and Basu, S and Krishan, B and Gautham, V (2021) Dynamic self-tuning, flickering and shedding in buoyant droplet diffusion flames under acoustic excitation. In: Proceedings of the Combustion Institute, 38 (2). pp. 3141-3149.

Pandey, K and Basu, S and V, G and Potnis, A and Chattopadhyay, K (2020) Self-tuning and topological transitions in a free-falling nanofuel droplet flame. In: Combustion and Flame, 220 . pp. 144-156.

Pandey, K and Hatte, S and Pandey, K and Chakraborty, S and Basu, S (2020) Cooperative evaporation in two-dimensional droplet arrays. In: Physical Review E, 101 (4).

Pandey, Khushboo and Basu, Saptarshi (2019) High vapour pressure nanofuel droplet combustion and heat transfer: Insights into droplet burning time scale, secondary atomisation and coupling of droplet deformations and heat release. In: COMBUSTION AND FLAME, 209 . pp. 167-179.

Pandey, Khushboo and Basu, Saptarshi (2018) How boiling happens in nanofuel droplets. In: PHYSICS OF FLUIDS, 30 (10).

Pandey, Khushboo and Chattopadhyay, Kamanio and Basu, Saptarshi (2017) Combustion dynamics of low vapour pressure nanofuel droplets. In: PHYSICS OF FLUIDS, 29 (7).

Pandey, Sunil Kumar and Akella, SR Sarma and Ravikrishna, R (2018) Novel fuel injection strategies for PCCI operation of a heavy-duty turbocharged diesel engine. In: APPLIED THERMAL ENGINEERING, 143 . pp. 883-898.

Pandey, Sunil Kumar and Vandana, Suryanarayana and Akella, S. R. Sarma and Ravikrishna, R V (2019) Potential of Early Direct Injection (EDI) for simultaneous NOx and soot emission reduction in a heavy duty turbocharged diesel engine. In: APPLIED THERMAL ENGINEERING, 158 .

Pandey, V and Kumar, P (2018) Thermal resistance network model for a recuperator in S-CO2 power cycle. In: 16th International Heat Transfer Conference, IHTC 2018, 10 - 15 August 2018, Beijing, China, pp. 4919-4930.

Pandey, V and Seshadri, L and Gupta, J and Mariayyah, R and Santhosh, NL and Kumar, P (2019) Modelling of gas cooler for S-CO2 Brayton power cycle. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Pandian, Navaneeth KR and Ananthasuresh, GK (2017) Synthesis of tensegrity structures of desired shape using constrained minimization. In: STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 56 (6). pp. 1233-1245.

Pandian, Navaneeth KR and Ananthasuresh, GK (2017) Synthesis of tensegrity structures of desired shape using constrained minimization. In: STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 56 (6). pp. 1233-1245.

Panicker, VB and Munjal, ML (1981) Aero-Acoustic Analysis Of Mufflers With Flow Reversals. In: Journal of the Indian Institute of Science, 63 (1). pp. 21-38.

Panicker, VB and Munjal, ML (1981) Aero-Acoustic Analysis Of Straight-Through Mufflers With Simple And Extended Tube Expansion Chambers. In: Journal of the Indian Institute of Science, 63 (1). pp. 1-19.

Panicker, VB and Munjal, ML (1981) Impedance tube technology for flow acoustics. In: Journal of Sound and Vibration, 77 (4). pp. 573-577.

Panigrahi, SN and Munjal, ML (2005) Combination mufflers - Theory and parametric study. In: Journal of Noise Control Engineering, 53 (6). pp. 247-255.

Panigrahi, SN and Jog, CS and Munjal, ML (2008) Multi-focus design of underwater noise control linings based on finite element analysis. In: Applied Acoustics, 69 (12). pp. 1141-1153.

Panigrahi, SN and Munjal, ML (2007) Backpressure considerations in designing of cross flow perforated-element reactive silencers. In: Noise Control Engineering Journal, 55 (6). pp. 504-515.

Panigrahi, SN and Munjal, ML (2005) Comparison of various methods for analyzing lined circular ducts. In: Journal of Sound And Vibration, 285 (4-5). pp. 905-923.

Panigrahi, SN and Munjal, ML (2005) Plane wave propagation in generalized multiply connected acoustic filters. In: Journal of The Acoustical Society of America, 118 (5). pp. 2860-2868.

Panigrahi, SN and Munjal, ML (2007) A generalized scheme for analysis of multifarious commercially used mufflers. In: Applied Acoustics, 68 (6). pp. 660-681.

Panigrahi, SN and Munjal, ML and Kumar, Sreehari B (2008) Design enhancement of the underwater noise control linings through a parsimonious parametric study. In: Proc. ICSV15, Daejeon, Korea, Daejeon.

Parameswaran, G and Jayaram, V and Kailas, SV (2024) Predicting Low Sliding Friction in Al-Steel Reciprocating Sliding Experiment after a Controlled Grinding of the Steel Counterface. In: Lubricants, 12 (8).

Pardeshi, R and Singh, AK and Dutta, P (2009) Modeling of Solidification Process in a Rotary Electromagnetic Stirrer. In: Numerical Heat Transfer, Part A: Applications, 55 (1). pp. 42-57.

Pardeshi, R and Dutta, Pradip and Singh, AK (2009) Modeling of Convection and Macrosegregation through Appropriate Consideration of Multiphase/Multiscale Phenomena during Alloy Solidification. In: Industrial and Engineerign Chemistry Research, 48 (19). pp. 8789-8804.

Pardeshi, R and Singh, AK and Dutta, P (2008) Simulations of sedimentation in alloy solidification using a continuum model. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Pardeshi, R and Singh, AK and Voller, VR and Dutta, P (2011) A Dual Scale Model for Macrosegregation in Alloy Solidification. In: Numerical Heat Transfer Part A, 59 (12). pp. 934-953.

Pardeshi, R and Voller, VR and Singh, AK and Dutta, P (2008) An explicit–implicit time stepping scheme for solidification models. In: International Journal of Heat and Mass Transfer, 51 (13-14). pp. 3399-3409.

Parida, DR and Advaith, S and Dani, N and Basu, S (2022) Assessing the impact of a novel hemispherical diffuser on a single-tank sensible thermal energy storage system. In: Renewable Energy, 183 . pp. 202-218.

Parida, DR and Basu, S (2023) On the specific heat capacity of HITEC-salt nanocomposites for concentrated solar power applications. In: RSC Advances, 13 (8). pp. 5496-5508.

Pariyar, A and Edachery, V and John, A and Kailas, SV (2021) A comparative tribological study of Inconel X750 under surface hardened and non-hardened conditions. In: Surface Topography: Metrology and Properties, 9 (3).

Pariyar, A and John, A and Perugu, CS and Edachery, V and Kailas, SV (2023) Influence of laser beam welding parameters on the microstructure and mechanical behavior of Inconel X750 superalloy. In: Manufacturing Letters, 35 . pp. 33-38.

Pariyar, A and Perugu, CS and Abhishek, BM and Toth, LS and Kailas, SV (2023) In-situ polymer-derived SiOC strengthened aluminum sheets: Investigations on its manufacturing and structure-property correlations. In: Materialia, 30 .

Pariyar, A and Perugu, CS and Dash, K and Kailas, SV (2021) Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides. In: Materials Characterization, 171 .

Pariyar, A and Perugu, CS and Toth, LS and Kailas, SV (2021) Microstructure and mechanical behavior of polymer-derived in-situ ceramic reinforced lightweight aluminum matrix composite. In: Journal of Alloys and Compounds, 880 .

Pariyar, A and Toth, LS and Kailas, SV and Peltier, L (2021) Imparting high-temperature grain stability to an Al-Mg alloy. In: Scripta Materialia, 190 . pp. 141-146.

Pariyar, A and Vu, VQ and Kailas, SV and Toth, LS (2023) Room-Temperature Single-Step Production of Ultrafine-Grained Bulk Metallic Sheets From Al Powder. In: Journal of Manufacturing Science and Engineering, 145 (10).

Pariyar, A. and Edachery, V. and Abhishek, B.M. and Perugu, C.S. and Rajneesh, H. and Kailas, S.V. (2020) In-situ interfacial growth of TiAl intermetallic and its influence on microparticle dislodgement during abrasive wear of Al/Ti6Al4V composite. In: Materials Today Communications, 24 .

Parthasarathi, S and Nagarajan, S and Desai, S and Reddy, SU and Narasimham, GSVL (2021) Effect of bend radius and insulation on adiabatic section on the performance of a single closed loop pulsating heat pipe: experimental study and heat transfer correlation. In: Heat and Mass Transfer/Waerme- und Stoffuebertragung .

Parthasarathy, Neeraj and Dhiman, Amit and Sarkar, Sandip (2017) Flow and heat transfer over a row of multiple semi-circular cylinders: selection of optimum number of cylinders and effects of gap ratios. In: EUROPEAN PHYSICAL JOURNAL PLUS, 132 (12).

Parween, R (2020) Significance of the Asymmetry of the Haltere: A Microscale Vibratory Gyroscope. In: Applied Bionics and Biomechanics, 2020 .

Parween, Rizuwana and Pratap, Rudra (2015) Modelling of soldier fly halteres for gyroscopic oscillations. In: BIOLOGY OPEN, 4 (2). pp. 137-145.

Patel, A and Balasubramanian, AK and Biradar, V and Srivatsa, S and Kumar, P and Sonti, VR (2019) Analysis of aerostatic thrust bearing for S-CO2 turbomachinery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Patel, A and Biradar, V and Kumar, P (2021) HARMONIC ANALYSIS of the HIGH SPEED DIRECT COUPLED SCO2 TURBOGENERATOR. In: ASME 2021 Gas Turbine India Conference, 2-3 Dec 2021, Virtual, Online.

Patel, A and Prasad, KNV and Biradar, V and Kumar, P and Narayanan, G (2023) Structural Analysis and Determination of Critical Speed of a 10,000 rpm Switched Reluctance Machine Rotor. In: 9th IEEE India International Conference on Power Electronics, IICPE 2023, 28 November 2023 through 30 November 2023, Sonipat.

Patel, A and Prasad, KNV and Kumar, P and Narayanan, G (2024) Structural Analysis of Slitted Rotor for 10,000 rpm Switched Reluctance Machine. In: 3rd International Conference on Power, Control and Computing Technologies, ICPC2T 2024, 18 January 2024through 20 January 2024, Raipur, pp. 624-629.

Patel, AK and Joseph, D and Atreya, HS and Suryaprakash, N (2022) A One-Dimensional Phase-Modulated (PM) NMR Experiment for Differentiating Spin Systems in Small Molecules Mixtures: With Application to Chiral Discrimination and Bicomponent Organic Systems. In: Analytical Chemistry .

Patel, J and Ananthasuresh, GK (2006) Kinematics of Planar, Radially Foldable Mechanisms using Algebraic Loci. In: Proceedings of the 2005 Aerospace and Related Mechanisms, Nov 18-19 2006, Bangalore, India.

Patel, Jiten and Ananthasuresh, GK (2006) A Kinematic Theory for Planar Hoberman and Other Novel Foldable Mechanisms. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13, 2006, Philadelphia, Pennsylvania.

Patel, Jiten and Ananthasuresh, GK (2007) A kinematic theory for radially foldable planar linkages. In: International Journal of Solids and Structures, 44 (18-19). pp. 6279-6298.

Patel, Kishore Singh and Shukla, Ratnesh K (2017) Numerical simulation of breakup and detachment of an axially stretching Newtonian liquid bridge with a moving contact line phase field method. In: Sādhanā, 42 (4). pp. 467-477. ISSN 0256-2499

Pathak, B and Kumar, R and Basu, S (2012) Agglomeration dynamics of an evaporating acoustically levitated droplet. In: 9th European Fluid Mechanics Conference, September 9-13, 2012, Rome, Italy.

Pathak, B and Kumar, R and Basu, S (2017) Dynamics of Droplet Break-Up. [Book Chapter]

Pathak, Binita and Basu, Saptarshi (2016) Comparison of Convective and Radiative Heating Modes on the Thermophysical Changes of a Cerium Nitrate Droplet. In: JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 8 (1, SI).

Pathak, Binita and Basu, Saptarshi (2016) Deformation pathways and breakup modes in acoustically levitated bicomponent droplets under external heating. In: PHYSICAL REVIEW E, 93 (3).

Pathak, Binita and Basu, Saptarshi (2016) Modulation of Buckling Dynamics in Nanoparticle Laden Droplets Using External Heating. In: LANGMUIR, 32 (11). pp. 2591-2600.

Pathak, Binita and Basu, Saptarshi (2015) Phenomenology and control of buckling dynamics in multicomponent colloidal droplets. In: JOURNAL OF APPLIED PHYSICS, 117 (24).

Pathak, Binita and Basu, Saptarshi (2016) Phenomenology of break-up modes in contact free externally heated nanoparticle laden fuel droplets. In: PHYSICS OF FLUIDS, 28 (12).

Pathak, Binita and Basu, Saptarshi and Kumar, Ranganathan (2013) Heat and mass transfer and chemical transformation in a cerium nitrate droplet. In: International Journal of Heat and Mass Transfer, 63 . pp. 301-312.

Pathak, Binita and Deepu, P and Basu, Saptarshi and Kumar, Ranganathan (2013) Modeling of agglomeration inside a droplet with nanosuspensions in an acoustic field. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 59 . pp. 161-166.

Pathak, Binita and Hatte, Sandeep and Basu, Saptarshi (2017) Evaporation Dynamics of Mixed-Nanocolloidal Sessile Droplets. In: LANGMUIR, 33 (49). pp. 14123-14129.

Pathak, Binita and Kar, Goutam Prasanna and Bose, Suryasarathi and Basu, Saptarshi (2017) Phase separation and physico-chemical processes at microscopic and macroscopic levels in MWCNT laden polymer blends using a unique droplet based architecture. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 19 (36). pp. 24961-24970.

Pathak, Binita and Sanyal, Apratim and Basu, Saptarshi (2015) Experimental Study of Shape Transition in an Acoustically Levitated and Externally Heated Droplet. In: JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 137 (12, SI).

Pathak, Binita and Xavier, Priti and Bose, Suryasarathi and Basu, Saptarshi (2016) Thermally induced phase separation in levitated polymer droplets. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (47). pp. 32477-32485.

Pathak, Harshavardhana S and Shukla, Ratnesh K (2016) Adaptive finite-volume WENO schemes on dynamically redistributed grids for compressible Euler equations. In: JOURNAL OF COMPUTATIONAL PHYSICS, 319 . pp. 200-230.

Pathak, Nitin and Kumar, Arvind and Yadav, Anil and Dutta, Pradip (2009) Effects of mould filling on evolution of the solid-liquid interface during solidification. In: Applied Thermal Engineering, 29 (17-18). pp. 3669-3678.

Pathak, Rakesh Kumar and Kumar, Ravi A and Ananthasuresh, GK (2012) Simulations and experiments in punching spring-steel devices with sub-millimeter features. In: North American Manufacturing Research Institution of SME, June 4-8, 2012, Notre Dame, IN, USA.

Pathrikar, A and Rahaman, MM and Roy, D (2021) A gauge theory for brittle damage in solids and a peridynamics implementation. In: Computer Methods in Applied Mechanics and Engineering, 385 .

Pathrikar, A and Roy, D (2021) Peridynamics Implementation of a Gauge Theory for Brittle Damage in Solids and Applications. In: Journal of Peridynamics and Nonlocal Modeling .

Patil, Navendu and Mahadevan, Pradeep and Chatterjee, Anindya (2009) Fatigue Laws Via Functional Equations. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 35-42.

Patil, A and Sen, D (2020) Haptics aided kinematic assembly modeling and efficient determination of joint ranges of motion. In: 14th National Conference on Machines and Mechanisms, NaCoMM 2009, 17-18 December 2009, National Institute of TechnologyDurgapur; India, pp. 68-75.

Patil, KG and Santhanam, V and Biswasa, SK and Ayappa, KG (2010) Combined Atomic Force Microscopy and Modeling Study of The Evolution of Octadecylamine Films on a Mica Surface. In: The Journal of Physical Chemestry C, 114 (8). pp. 3549-3559.

Patil, Navendu and Mahadevan, Pradeep and Chatterjee, Anindya (2008) A constructive empirical theory for metal fatigue under block cyclic loading. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 464 . pp. 1161-1179.

Patil, SD and Narasimhan, R and Mishra, RK (2011) Effect of lattice orientation on crack tip constraint in ductile single crystals. In: Fatigue and Fracture of Engineering Materials and Structures, 34 (8). pp. 604-618.

Patil, Swapnil and Narasimhan, R and Mishra, Raja K (2009) Families of asymptotic tensile crack tip stress fields in elastic-perfectly plastic single crystals. In: International Journal of Fracture, 155 (2). pp. 143-153.

Patil, Swapnil D and Narasimhan, R and Biswas, P and Mishra, RK (2008) Crack Tip Fields in a Single Edge Notched Aluminum Single Crystal Specimen. In: 5th International Conference on Materials Processing Defects (MDP-5), JUL 18-20, 2007, Ithaca, NY.

Patil, Swapnil D and Narasimhan, R and Mishra, RK (2008) A numerical study of crack tip constraint in ductile single crystals. In: Journal of the Mechanics and Physics of Solids, 56 (6). pp. 2265-2286.

Patil, Swapnil D and Narasimhan, R and Mishra, Raja K (2009) Observation of kink shear bands in an aluminium single crystal fracture specimen. In: Scripta Materialia, 61 (5). pp. 465-468.

Patil, V and Shastry, V and Himabindu, M and Ravikrishna, RV (2016) Life-cycle analysis of energy and greenhouse gas emissions of automotive fuels in India: Part 2-Well-to-wheels analysis. In: ENERGY, 96 . pp. 699-712.

Patnaik, MNM and Narasimhan, R and Ramamurty, U (2004) Spherical indentation response of metallic glasses. In: Acta Materialia, 52 (11). pp. 3335-3345.

Patra, Ajoy and Bandyopadhyay, Dipankar and Tomar, Gaurav and Sharma, Ashutosh and Biswas, Gautam (2011) Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates. In: Journal of Chemical Physics, 134 (6).

Pattnayak, PK and Kumar, A and Tomar, G (2024) Diffusion Dynamics of Star-Shaped Macromolecules in Dilute Solutions. In: Macromolecules .

Paul, R and Ghosh, T and Tang, T and Kumar, A (2020) Reply to the comment on "rivalry in: Bacillus subtilis colonies: Enemy or family?". In: Soft Matter, 16 (13). pp. 3347-3349.

Paul, Rajorshi and Ghosh, Tanushree and Tang, Tian and Kumar, Aloke (2019) Rivalry in Bacillus subtilis colonies: enemy or family? In: SOFT MATTER, 15 (27). pp. 5400-5411.

Paul, S and Kumar, P and Rao, SM (2023) Thermodynamic analysis on the effect of supercritical CO2 ejector in cogeneration cycle for dairy application. In: Thermal Science and Engineering Progress, 39 .

Paul, S and Srikar, RP and Kumar, P and Rao, SMV (2024) A physics-based hybrid model for supercritical CO 2 ejector in critical flow regime. In: Physics of Fluids, 36 (8).

Pawar, Shashikant S and Arakeri, Jaywant H (2016) Intensity and angle-of-arrival spectra of laser light propagating through axially homogeneous buoyancy-driven turbulence. In: APPLIED OPTICS, 55 (22). pp. 5945-5952.

Pawar, Shashikant S and Arakeri, Jaywant H (2016) Kinetic energy and scalar spectra in high Rayleigh number axially homogeneous buoyancy driven turbulence. In: PHYSICS OF FLUIDS, 28 (6).

Pawar, Shashikant S and Arakeri, Jaywant H (2016) Two regimes of flux scaling in axially homogeneous turbulent convection in vertical tube. In: PHYSICAL REVIEW FLUIDS, 1 (4).

Pendyala, Prashant and Bobji, MS and Madras, Giridhar (2014) Evolution of Surface Roughness During Electropolishing. In: TRIBOLOGY LETTERS, 55 (1). pp. 93-101.

Phadke, KS and Madival, DG and Venkataraman, J and Kundu, D and Ramanujan, KS and Holla, N and Arakeri, J and Tomar, G and Datta, S and Ghatak, A (2021) Novel non intrusive continuous use ZeBox technology to trap and kill airborne microbes. In: Scientific Reports, 11 (1).

Phanikumar, G and Dutta, P and Chattopadhyay, K (2005) Continuous welding of Cu-Ni dissimilar couple using $CO_{2}$ laser. In: Science and Technology of Welding and Joining, 10 (2). pp. 158-166.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2011) Joining of dissimilar metals: issues and modelling techniques. In: Science and Technology of Welding & Joining, 16 (4). pp. 313-317.

Phanikumar, G and Chattopadhyay, K and Dutta, P (2000) Supercomputing applications in materials engineering. In: Current Science, 78 (7). pp. 847-849.

Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.

Philip, JT and Ananthakrishnan, R and Roy, RB and Sundaresan, A and Santhan, R (2023) Surface modification methods to improve the tribo-corrosion behavior of Ti6Al4V: A review. In: International Conference on Materials, Energy and Mechanical Engineering 2021, ICME2 2021, 17- 18 December 2021, Madanapalle, Andhra Pradesh.

Philip, JT and Singh, K and Kailas, SV (2024) Ti6Al4V interacting with Al2O3 under ambient and vacuum conditions: Effect of plastic deformation and tribo-chemical reactions on wear mechanisms. In: Wear, 550-55 .

Pilli, SC and Mruthyunjaya, TS (2004) Whole arm manipulation using closed and hybrid planar chains: A kinematic study. In: 11th World Congress in Mechanism and Machine Science, APR 01-04, 2004, Tianjin, PEOPLES R CHINA.

Podugu, Pakeeruraju and Ananthasuresh, GK (2012) Topology optimization-based design of a compliant aircraft compliant aircraft wing for morphing leading and trailing edges. In: ASME International Mechanical Engineering Congress and Exposition (IMECE), NOV 12-18, 2010, Vancouver, CANADA, pp. 1099-1107.

Pollayi, Hemaraju and Harursampath, Dineshkumar and Yu, Wenbin (2013) Evaluation of strength of component-laminates in strip-based mechanisms. In: Composite Structures, 100 . pp. 1-16.

Potghan, N and Jog, CS (2020) An arbitrary Lagrangian�Eulerian-based finite element strategy for modeling incompressible two-phase flows. In: International Journal for Numerical Methods in Fluids .

Pothnis, JR and Hajagolkar, AK and Anilchandra, AR and Das, R and Gururaja, S (2023) Open-hole fatigue testing of UD-GFRP composite laminates containing aligned CNTs using infrared thermography. In: Composite Structures, 324 .

Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2009) Correlating The Features Of Topography To Friction By Sliding Experiments. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 361-364.

Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2010) Experimental estimation of friction force in lubricated cutting of steel. In: Wear, 269 (7-8). pp. 557-564.

Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2011) Lubricity of an oil in water emulsion in metal cutting: The effect of hydrophilic/lypophilic balance of emulsifiers. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 384 (1-3). pp. 323-330.

Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.

Prabhu, Akhilesh M and Shukla, Ratnesh K and Arakeri, Jaywant H (2016) Numerical Investigation of Centrifugal Instability Around a Circular Cylinder Rotated Impulsively. In: IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, DEC 15-18, 2014, Goa, INDIA, pp. 146-154.

Prabu, S S Mani and Madhu, H C and Perugu, Chandra S and Akash, K and Kumar, P Ajay and Kailas, Satish V and Anbarasu, Manivannan and Palani, I A (2017) Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 693 . pp. 233-236.

Prabu, S S Mani and Madhu, HC and Perugu, Chandra S and Akash, K and Mithun, R and Kumar, P Ajay and Kailas, Satish and Anbarasu, Manivannan and Palani, IA (2019) Shape memory effect, temperature distribution and mechanical properties of friction stir welded nitinol. In: JOURNAL OF ALLOYS AND COMPOUNDS, 776 . pp. 334-345.

Prabu, S S Mani and Perugu, Chandra S and Madhu, H C and Jangde, Ashutosh and Khan, Sohel and Jayachandran, S and Manikandan, M and Kumar, P Ajay and Kailas, Satish and Palani, I A (2019) Exploring the functional and corrosion behavior of friction stir welded NiTi shape memory alloy. In: JOURNAL OF MANUFACTURING PROCESSES, 47 . pp. 119-128.

Pradeep, S (2002) Nonlinear control of unmanned combat aircraft during take-off. In: 40th AIAA Aerospace Sciences Meeting and Exhibit, 14-01-2002, Reno, NV.

Pradeep Kumar, AS and Udipi, Shrinivasa (2006) Extending lagrange interpolation to develop a 4-node quadrilateral element. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Jul 04-07, 2006, Turin, Italy, pp. 879-887.

Prakasan, K and Palaniappan, S and Seshan, S (1997) Thermal expansion characteristics of cast Cu based metal matrix composites. In: Composites Part A, 28A (12). pp. 1019-1022.

Prakasan, K and Seshan, S (1997) Electrical conductivity of squeeze cast copper. In: Journal of Materials Science Letters, 16 (19). pp. 1588-1589.

Prakasan, K and Seshan, S (1998) Microstructure and mechanical properties of squeeze-cast copper. In: One Hundred First Annual Meeting of the American Foundrymen's Society, 20-23 Apr. 1997, Seattle, Washington.

Prakasan, Kalakkath and Seshan, Sambasivam (1999) Microstructure and properties of squeeze cast Cu-carbon fibre metal matrix composite. In: Journal of Materials Science (full set), 34 (20). pp. 5045-5049.

Prakash, Raghu V and Sunder, R (1993) Fatigue Life Under Random Load History Derived From Exceedance Curves Using Different Algorithms. In: Fatigue & Fracture of Engineering Materials & Structures, 16 (7). pp. 707-721.

Prakash, Jose M and Mattern, A and Prasad, Madhu and Ram, Sant and Subramanya, * and Srinivasan, K (2000) Adsorption parameters of activated charcoal from desorption studies. In: Carbon, 38 (8). pp. 1163-1168.

Prakash, Jose M and Prasad, Madhu and Rastogi, SC and Akkimaradi, BS and Gupta, PP and Narayanamurthy, H and Srinivasan, K (2000) Development of a laboratory model of activated charcoal-nitrogen adsorption cryocooler. In: Cryogenics, 40 (7). pp. 481-488.

Prakash, Jose M and Prasad, Madhu and Srinivasan, K (2000) Modeling of thermal conductivity of charcoal–nitrogen adsorption beds. In: Carbon, 38 (6). pp. 907-913.

Prakash, O and Kumar, A and Laguri, V (2022) Thermodynamic analysis of sensible heat storage based double pass hybrid solar air heater with and without reflector. In: Sadhana - Academy Proceedings in Engineering Sciences, 47 (1).

Prakash, R Surya and Sinha, Anubhav and Tomar, Gaurav and Ravikrishna, RV (2018) Liquid jet in crossflow - Effect of liquid entry conditions. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 93 . pp. 45-56.

Prakash, S and Jain, M and Raghunandan, BN and Ravikrishna, RV and Tomar, G (2015) Numerical study of liquid jet in swirling cross flow. In: ICLASS 2015 - 13th International Conference on Liquid Atomization and Spray Systems, 23 - 27 August 2015, National Cheng Kung UniversityTainan; Taiwan.

Prakash, Vijay S and Sonti, Venkata R (2013) Asymptotic expansions for the structural wavenumbers of isotropic and orthotropic fluid-filled circular cylindrical shells in the intermediate frequency range. In: Journal of Sound and Vibration, 332 (16). pp. 3696-3705.

Prakash, Vijay S and Sonti, Venkata R (2014) Asymptotic expansions for wavenumbers in orthotropic fluid-filled circular cylindrical shells for intermediate fluid loading. In: JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 135 (6). pp. 3198-3208.

Prakash, Vijay S and Sonti, Venkata R (2016) Wave propagation in a 2D nonlinear structural acoustic waveguide using asymptotic expansions of wavenumbers. In: JOURNAL OF SOUND AND VIBRATION, 362 . pp. 157-175.

Prakash, Vijay S and Sonti, Venkata R (2015) Weakly nonlinear acoustic wave propagation in a nonlinear orthotropic circular cylindrical waveguide. In: JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 138 (5). pp. 3231-3244.

Prakash, Vijay S and Sonti, Venkata R (2016) A systematic asymptotic approach to determine the dispersion characteristics of structural-acoustic waveguides with arbitrary fluid loading. In: JOURNAL OF SOUND AND VIBRATION, 373 . pp. 164-179.

Prakash, Vivek N and Sreenivas, KR and Arakeri, Jaywant H (2008) High Rayleigh Number High Prandtl Number Natural Convection mimicking Mantle Convection. In: 7th Euromech Fluid Mechanics Conference, University of Manchester, U.K., Manchester.

Prakash, Vivek N and Sreenivas, KR and Arakeri, Jaywant H (2008) Planform Plume Structures in High Rayleigh Number High Prandtl Number Natural Convection. In: 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, Daejeon.

Prakash, Vivek N and Sreenivas, KR and Arakeri, Jaywant H (2017) The role of viscosity contrast on plume structure in laboratory modeling of mantle convection. In: CHEMICAL ENGINEERING SCIENCE, 158 . pp. 245-256.

Pramanik, S and Ravikrishna, RV (2020) Detached Eddy Simulation of syngas combustion in a reverse-flow configuration. In: International Journal of Hydrogen Energy .

Pramanik, S and Ravikrishna, RV (2020) Effect of N2 dilution and preheat temperature on combustion dynamics of syngas in a reverse-flow combustor. In: Experimental Thermal and Fluid Science, 110 .

Pramanik, S and Ravikrishna, RV (2020) Investigation of novel scaling criteria on a reverse-flow combustor. In: Energy, 206 .

Pramanik, S and Ravikrishna, RV (2022) Non premixed operation strategies for a low emission syngas fuelled reverse flow combustor. In: Energy, 254 .

Pramanik, Santanu and Mukhopadhyay, Achintya (2016) Numerical Study of Counterflow Diffusion Flame and Water Spray Interaction. In: JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 8 (1, SI).

Pramanik, Santanu and Ravikrishna, R (2019) Effect of N-2 dilution and preheat temperature on combustion dynamics of syngas in a reverse-flow combustor. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 110 .

Pramanik, Santanu and Ravikrishna, RV (2017) Numerical study of rich catalytic combustion of syngas. In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 42 (26). pp. 16514-16528.

Pramanik, Santanu and Ravikrishna, RV (2016) A novel syngas-fired hybrid heating source for solar-thermal applications: Energy and exergy analysis. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 1011-1022.

Pramanik, Santanu and Ravikrishna, RV (2017) A review of concentrated solar power hybrid technologies. In: APPLIED THERMAL ENGINEERING, 127 . pp. 602-637.

Prasad, AKK and Srinivasan, MN (1998) Flow from T-spout ladles. In: One Hundred First Annual Meeting of the American Foundrymen's Society, 20-23 Apr. 1997, Seattle, Washington.

Prasad, AVSS and Venkatesh, KP and Pratap, Rudra and Bhat, Navakanta (2014) Improved design methodology for the development of electrically actuated MEMS structures. In: 27th International Conference on VLSI Design / 13th International Conference on Embedded Systems (VLSID), JAN 05-09, 2014, Mumbai, INDIA, pp. 499-503.

Prasad, BVSSV and Ravikrishna, RV (2012) Comparison of Jatropha Methyl Esther and diesel non-evaporating sprays. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Prasad, BVVSU and Sharma, CS and Anand, TNC and Ravikrishna, RV (2011) High swirl-inducing piston bowls in small diesel engines for emission reduction. In: Applied Energy, 88 (7). pp. 2355-2367.

Prasad, CR and Inamdar, AK and Venkatesh, P (1987) Computation of Diffuse Solar Radiation. In: Solar Energy, 39 (6). pp. 521-532.

Prasad, CR and Nirmala, KA and Venkatesh, Prabha (1985) Measurement of sensitivities for the thermal recording of laser beams. In: Optics & Laser Technology, 17 (6). 297 -302.

Prasad, CR and Sathyanarayan, SRC (1979) Studies in biogas technology. Part III. Thermal analysis of biogas plants. In: Sadhana - Academy Proceedings in Engineering Sciences, 2 (3). pp. 377-386.

Prasad, CR and Venkatesh, P (1982) Sequence generator for periodic sampling of transient phenomena. In: Journal of Physics E - Scientific Instruments, 15 (9). pp. 919-922.

Prasad, CR and Yoganarasimha, A and Venkateshan, SP (1979) Device for reusing damaged laser mirrors. In: Review of Scientific Instruments, 50 (2). pp. 262-263.

Prasad, CR and Yoganarasimha, A and Venkateshan, SP and Nagaraju, TG (1979) Technique for measuring the beam shape of pulsed lasers. In: Review of Scientific Instruments, 50 (9). pp. 1161-1162.

Prasad, D and Dash, S (2024) Evaporation of Leidenfrost droplets on microtextured substrates. In: International Journal of Thermal Sciences, 197 .

Prasad, D and Sharma, A and Dash, SB (2021) Influence of the substrate permeability on Leidenfrost temperature. In: International Journal of Heat and Mass Transfer, 178 .

Prasad, KNV and Patel, A and Biradar, V and Ahmad, SS and Kumar, P and Narayanan, G (2021) Bearing Selection for High-Speed Electrical Machine. In: 2021 National Power Electronics Conference, 15-17 Dec 2021, Bhubaneswar.

Prasad, M and Akkimaradi, BS and Rastogi, SC and Rao, RR and Srinivasan, K (1996) Adsorption Characteristics of The Charcoal-Nitrogen System at 79-320 K And Pressures To 5 MPa. In: Carbon, 34 (11). pp. 1401-1406.

Prasad, Madhu and Akkimaradi, BS and Rastogi, SC and Rao, Radhika Rani and Srinivasan, K (1999) Heats of adsorption for charcoal nitrogen systems. In: Carbon, 37 (10). pp. 1641-1642.

Prasad, N Subrahmanya and Narasimhan, R and Suwas, S (2018) Effect of notch acuity on the fracture behavior of AZ31 Mg alloy. In: ENGINEERING FRACTURE MECHANICS, 187 (SI). pp. 241-261.

Prasad, N Subrahmanya and Narasimhan, R and Suwas, S (2017) Effects of lattice orientation and crack tip constraint on ductile fracture initiation in Mg single crystals. In: INTERNATIONAL JOURNAL OF PLASTICITY, 97 . pp. 222-245.

Prasad, PBN and Simha, KRY (2004) Disc analogy for approaching circular arc cracks. In: International Journal of Fracture, 125 (1-2). 51 -71.

Prasad, PBN and Simha, KRY (2002) Interactions of interfacial arc cracks. In: International Journal of Fracture, 117 (1). pp. 39-62.

Prasad, PBN and Simha, KRY (2003) Interface crack around circular inclusion: SIF, kinking, debonding energetics. In: Engineering Fracture Mechanics, 70 (2). pp. 285-307.

Prasad, PBN and Simha, KRY (2002) Energy released during arc crack propagation. In: International Journal of Fracture, 116 (1). L3-L8 .

Prasad, Subrahmanya N and Kumar, Naveen N and Narasimhan, R and Suwas, S (2015) Fracture behavior of magnesium alloys - Role of tensile twinning. In: ACTA MATERIALIA, 94 . pp. 281-293.

Prasad, Subrahmanya N and Narasimhan, R and Suwas, S (2016) Numerical simulations of cylindrical void growth in Mg single crystals. In: Symposium on Ductile Failure and Localization, MAR 17-20, 2016, Maison Polytechniciens, Paris, FRANCE, pp. 159-183.

Prashantha, B G and Gowda, M S Govinde and Seetharamu, S and Narasimham, G S V L (2018) Design and analysis of acoustically-driven 50 W thermoacoustic refrigerators. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 43 (6).

Prashantha, BG and Govinde Gowda, MS and Seetharamu, S and Narasimham, GSVL (2017) Design Construction and Performance of 10W Thermoacoustic Refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 25 (3). p. 1750023. ISSN 2010-1325

Prashantha, BG and Gowda, MS Govinde and Seetharamu, S and Narasimham, GSVL (2017) Design and Comparative Analysis of Thermoacoustic Refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 25 (01). ISSN 2010-1325

Prashantha, BG and Kuwar, YV and Narasimham, GSVL and Seetharamu, S and Devappa, . (2024) Design and analysis of thermoacoustic air source heat pump water heaters. In: International Journal of Air-Conditioning and Refrigeration, 32 (1).

Prashantha, BG and Narasimham, GSVL and Seetharamu, S and Hemadri, VB (2023) Hydrogen, helium and thermo-acoustic refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 31 (1).

Prashantha, BG and Narasimham, GSVL and Seetharamu, S and Hemadri, VB (2022) Theoretical evaluation of stack-based thermoacoustic refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 30 (1).

Prashantha, BG and Narasimham, GSVL and Seetharamu, S and Manjunatha, K (2021) Effect of gas blockage on the theoretical performance of thermoacoustic refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 29 (3).

Prashantha, BG and Seetharamu, S and Narasimham, GSVL and Kumar, MRP (2019) Design and Analysis of Thermoacoustic Refrigerators Using Air as Working Substance. In: International Journal of Air-Conditioning and Refrigeration, 27 (1).

Prashantha, BG and Seetharamu, S and Narasimham, GSVL and Manjunatha, K (2023) Effect of gas spacing and resonance frequency on theoretical performance of thermoacoustic refrigerators. In: International Journal of Air-Conditioning and Refrigeration, 31 (1).

Prashantha, BG and Seetharamu, S and Narasimham, GSVL and Praveen Kumar, MR (2019) Effect of Stack Spacing on the Performance of Thermoacoustic Refrigerators Using Helium and Air as Working Substances. In: International Journal of Air-Conditioning and Refrigeration, 27 (2).

Pratap, Rudra and Pandey, Ashok Kumar (2008) Compact modeling of inertial and rarefaction effects on quality factor of MEMS torsional structures in continuum to molecular flows under low operating frequencies. In: MEMS/MOEMS Components and Their Applications V. Special Focus Topics: Transducers at the Micro-Nano Interface, Monday 21 January 2008, San Jose, CA, USA.

Pratap, R and Dangi, A and Behera, AR (2016) Effect of Microfabrication Induced Stresses on the Sensing Characteristics of Dynamic MEMS Devices. In: Symposium on Microfabricated and Nanofabricated Systems for MEMS/NEMS 12 held during the PRiME Joint International Meeting of The Electrochemical-Society, The Electrochemical-Society-of-Japan, and the Korean-Electrochemical-Society, OCT 02-07, 2016, Honolulu, HI, pp. 35-45.

Pratap, Rudra (2008) Ultrasound MEMS transducers: Design and Development. In: Seventeenth National Symposium on Ultrasonics, BHU Varanasi, India, BHU Varanasi.

Pratap, Rudra and Arunkumar, A (2007) Material selection for MEMS devices. In: Indian Journal of Pure and Applied Physics, 45 (4). pp. 358-367.

Pratap, Rudra and Mohite, Suhas and Pandey, Ashok K (2007) Squeeze Film Effects in MEMS Devices. In: Journal of the Indian Institute of Science, 87 (1). pp. 75-94.

Prathima, G E and Prakash, Shiva T and Venugopal, K R and Iyengar, S S and Patnaik, L M (2016) SADA : Secure Approximate Data Aggregation in Wireless Sensor Networks. In: 3rd International Conference on Data Science and Engineering (ICDSE), AUG 23-25, 2016, Cochin Univ Sci & Technol, Kochi, INDIA, pp. 46-51.

Prathima, N and Harini, A and Rai, Neeraj and Chandrashekara, RH and Ayappa, KG and Sampath, S and Biswas, SK (2005) Thermal Study of Accumulation of Conformational Disorders in the Self-Assembled Monolayers of C-8 and C-18 Alkanethiols on the Au(111) Surface. In: Langmuir, 21 (6). pp. 2364-2374.

Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.

Praveena, Manimunda and Guha, Kaustav and Ravishankar, Abhilash and Biswas, Sanjay K and Bain, Colin D and Jayaram, Vikram (2014) Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. In: RSC ADVANCES, 4 (42). pp. 22205-22213.

Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.

Pugazhendhi, Bhagat Singh and Kar, Amlan and Sinnaeruvadi, Kumaran and Suwas, Satyam (2018) Effect of aluminium on microstructure, mechanical property and texture evolution of dual phase Mg-8Li alloy in different processing conditions. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 18 (4). pp. 1332-1344.

Purushotham, J and Basu, A and Kulkarni, D and Patnaik, LM (1994) Performance of a pipelined ring algorithm for Fast Fourier Transform on transputer arrays. In: Computers & Electrical Engineering, 20 (4). pp. 319-326.

Puthenveettil, Baburaj A and Ananthakrishna, G and Arakeri, Jaywant H (2005) The Multifractal Nature of Plume Structure in High-Rayleigh-Number Convection. In: Journal of Fluid Mechanics, 526 . pp. 245-256.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2008) Convection due to an unstable density difference across a permeable membrane. In: Journal of Fluid Mechanics, 609 . pp. 139-170.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2004) Flux scaling and plume structure in high Ra - high Sc turbulent convection. In: Proceedings of the Tenth Asian Congress of Fluid Mechanics, 17--21, May 2004, Peradeniya, Srilanka.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2004) Integral analysis of laminar indirect free convection boundary layers with weak blowing for Schmidt no. ~ 1. In: International Communications I Heat and Mass Transfer, 31 (8). pp. 1199-1208.

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2005) Plume structure in high Rayleigh number convection. [Preprint]

Puthenveettil, Baburaj A and Arakeri, Jaywant H (2005) Plume structure in high-Rayleigh-number convection. In: Journal of Fluid Mechanics, 542 . 217 -249.

Puthenveettil, Baburaj A and Gunasegarane, GS and Agrawal, Yogesh K and Schmeling, Daniel and Bosbach, Johannes and Arakeri, Jaywant H (2011) Length of near-wall plumes in turbulent convection. In: Journal of Fluid Mechanics, 685 . pp. 335-364.

Q

Quadros, WR and Gurumoorthy, B and Ramaswami, K and Prinz, FB (2001) Skeletons for Representation and Reasoning in Engineering Applications. In: Engineering with Computers, 17 (2). pp. 186-198.

Quadros, WR and Ramaswami, K and Prinz, FB and Gurumoorthy, B (2004) LayTracks: a new approach to automated geometry adaptive quadrilateral mesh generation using medial axis transform. In: International Journal for Numerical Methods in Engineering, 61 . pp. 209-237.

R

Raghavan, MR and Nagendra, HR (1979) A study on bullock carts. Part 1. Engineering analysis of the two-wheel bullock cart design. In: Sadhana, 2 (4). pp. 435-449.

Raghavan, MR and Rao, DL Prasanna (1979) A study on bullock carts. Part 2. Experimental study of forces in a bullock cart. In: Sadhana, 2 (4). pp. 451-471.

Raghavana, MR and Jayachandran, R (1989) Analysis of the performance characteristics of a two-inertia power transmission system with a plate clutch. In: Mechanism and Machine Theory, 24 (6). pp. 499-503.

Raghuram, GKS and Bansal, L and Basu, S and Kumar, A (2021) Suppression of coffee ring effect in high molecular weight polyacrylamide droplets evaporating on hydrophobic surfaces. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 612 .

Raj, PM and Sarkar, S and Chakraborty, S and Dutta, P (2001) Three-dimensional computational modelling of momentum, heat and mass transfer in laser surface alloying with distributed melting of alloying element. In: International Journal of Numerical Methods for Heat and Fluid Flow, 11 (5-6). pp. 576-599.

Raj, Arul K and Karthikeyan, M and Alphonsa, J and Satish, V K and Venugopal, S (2013) WEAR AND SLIDING-FRICTION CHARACTERISTICS OF STAINLESS STEEL SS316LN WITHOUT A COATING AND WITH A CrN COATING AT ELEVATED TEMPERATURES AND IN A VACUUM. In: METALLURGIST, 57 (7-8). pp. 727-735.

Raj, Ashok J and Kailas, Satish V (2016) Effect of strain rate response and pin diameter on mechanically mixed layer formation and wear mechanisms in a Ti6Al4V-SS316L pair. In: Malaysian International Tribology Conference (MITC), NOV 16-17, 2015, Penang, MALAYSIA, pp. 137-138.

Raj, Ashok J and Pottirayil, Anirudhan and Kailas, Satish V (2017) Dry Sliding Wear Behavior of Ti-6Al-4V Pin Against SS316L Disk at Constant Contact Pressure. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 139 (1).

Raj, Mohan P and Sarkar, S and Chakraborty, S and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. In: International Journal of Heat and Fluid Flow, 23 (3). pp. 298-307.

Raj, VC and Shrigondekar, H and Dixit, B and Mukunda, HS and Prabhu, SV (2022) The Effect of Surrounding Water on the Burning Rates of Pool Fires. In: Fire Technology .

Rajamanickam, K and Basu, S (2020) Breakup and dispersion dynamics of droplets in turbulent swirling flow field. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-26 July 2018, Chicago; United States.

Rajamanickam, K and Mukhopadhyay, A and Basu, S (2017) On Primary Atomization in Propulsive Device Fuel Injectors—A Short Review. [Book Chapter]

Rajamanickam, K and Potnis, A and Basu, S (2020) Characterization and dynamics of spray flow field in gas turbine swirl cup. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-26 July 2018, Chicago; United States.

Rajamanickam, K and Potnis, A and Kumar, S and Basu, S (2020) On the dynamics of sprays in complex gas turbine swirl injectors. In: Experiments in Fluids, 61 (2).

Rajamanickam, K and Roy, S and Basu, S (2018) Novel Fuel Injection Systems for High-Speed Combustors. [Book Chapter]

Rajamanickam, Kuppuraj and Basu, Saptarshi (2018) Insights into the dynamics of conical breakdown modes in coaxial swirling flow field. In: JOURNAL OF FLUID MECHANICS, 853 . pp. 72-110.

Rajamanickam, Kuppuraj and Basu, Saptarshi (2017) Insights into the dynamics of spray-swirl interactions. In: JOURNAL OF FLUID MECHANICS, 810 . pp. 82-126.

Rajamanickam, Kuppuraj and Basu, Saptarshi (2017) On the dynamics of vortex-droplet interactions, dispersion and breakup in a coaxial swirling flow. In: JOURNAL OF FLUID MECHANICS, 827 . pp. 572-613.

Rajamanickam, Kuppuraj and Potnis, Aditya and Kumar, K R Sakthi and Sivakumar, D and Basu, Saptarshi (2019) On the influence of geometrical parameters on the spray characteristics of high shear injectors. In: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 109 .

Rajanbabu, N and Chatterjee, Anindya and Menon, AG (2007) Motional coherence during resonance ejection of ions from Paul traps. In: International Journal of Mass Spectrometry, 261 (2-3). pp. 159-169.

Rajanbabu, N and Marathe, Amol and Chatterjee, Anindya and Menon, AG (2007) Multiple scales analysis of early and delayed boundary ejection in Paul traps. In: International journal of Mass Spectrometry, 261 (2-3). pp. 170-182.

Rajaraman, Kaveri and Godthi, Vamsy and Pratap, Rudra and Balakrishnan, Rohini (2015) A novel acoustic-vibratory multimodal duet. In: JOURNAL OF EXPERIMENTAL BIOLOGY, 218 (19). pp. 3042-3050.

Rajendrakumar, PK and Biswas, SK (1997) Deformation due to contact between a two-dimensional rough surface and a smooth cylinder. In: Tribology Letters, 3 (4). pp. 297-301.

Rajendrakumar, PK and Biswas, SK (1996) Elastic Contact Between a Cylindrical Surface and a Flat Surface - A non-Hertzian Model of Multi-asperity Contact. In: Mechanics Research Communications, 23 (4). pp. 367-380.

Rajendran, A and Hariharan, R and Kailas, SV (2022) Influence of complete tool-offset position on intrinsic microstructure and its effect on fatigue life of aa2024 alloy-copper joint made by friction stir welding. In: Materials Performance and Characterization, 11 (2).

Rajendran, A and Nadammal, N and Singh, K and Kailas, SV (2021) Effect of axial load-dependent deformation rate on the grain size distribution and mechanical properties of friction stir processed copper. In: Materials Performance and Characterization, 10 (2).

Rajendran, S and Narasimhan, MV (1997) Effect of inertia variation due to reciprocating parts and connecting rod on coupled free vibration of crankshaft. In: Journal of Engineering for Gas Turbines and Power, 119 (1). pp. 257-263.

Rajendran, S and Narasimhan, MV (1994) An accelerated subspace iteration method. In: International Journal for Numerical Methods in Engineering, 37 (1). 141 -153.

Rajendran, S and Raghavan, MR and Narasimhan, MV (1995) Improving the convergence rate of the inverse iteration method. In: Computers & Structures, 55 (4). pp. 709-715.

Rajput, AS and Varma, SC and Kumar, A (2023) Sub-Newtonian coalescence in polymeric fluids. In: Soft Matter .

Raju, LT and Chakraborty, S and Pathak, B and Basu, S (2018) Controlling Self-Assembly and Topology at Micro-Nano Length Scales Using a Contact-Free Mixed Nanocolloid Droplet Architecture. In: Langmuir, 34 (18). pp. 5323-5333.

Raju, Lijun T and Kabi, Prasenjit and Basu, Saptarshi (2019) Evaporation driven self-assembly in a levitated nanocolloidal droplet can create a spatially varying photonic band-gap. In: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 578 .

Raju, SR and Balakrishnan, S and Kollimada, S and Chandrashekara, KN and Jampani, A (2020) Anti-tumor effects of Artemisia nilagirica extract on MDA-MB-231 breast cancer cells: deciphering the biochemical and biomechanical properties via TGF-β upregulation. In: Heliyon, 6 (10).

Raju, Srinivasa K and Kumar, Nagesh D (2010) Multicriterion Analysis in Engineering and Management. PHI Learning Pvt. Ltd., New Delhi, India,. ISBN 978-81-203-3976-7

Rakesh, N and Mruthyunjaya, TS and Girish, GD (1984) Velocity and acceleration analysis of complex mechanisms by graphical iteration. In: Mechanism and Machine Theory, 19 (3). pp. 349-356.

Rakesh, NS and Ahmed, A and Joseph, J and Aouti, RS and Mogra, M and Kushwaha, A and Ashwin, R and Rao, SM and Ananthasuresh, GK (2021) Analysis of heat paths in dual-probe-heat-pulse soil-moisture sensors for improved performance. In: Sensors and Actuators, A: Physical, 318 .

Rakshit, Sourav and Ananthasuresh, GK (2006) Simultaneous Geometry Optimization and Material Selection for Truss Structures. In: CD-ROM Proceedings of the ASME International Design Engineering and Technical Conferences, September 10–13 2006, Philadelphia, USA.

Rakshit, Sourav and Ananthasuresh, GK (2008) Simultaneous material selection and geometry design of statically determinate trusses using continuous optimization. In: Structural and Multidisciplinary Optimization, 35 (1). pp. 55-68.

Rakshit, Sourav and Ananthasuresh, GK (2008) An amino acid map of inter-residue contact energies using metric multi-dimensional scaling. In: Journal of Theoretical Biology, 250 (2). pp. 291-299.

Rakshit, Sourav and Ananthasuresh, GK (2010) A novel approach for large-scale polypeptide folding based on elastic networks using continuous optimization. In: Journal of Theoretical Biology, 262 (3). pp. 488-497.

Ram Kumar, V and Munjal, ML (2019) Plane wave frequency domain analysis of resonance free pipes with moving medium. In: Noise Control Engineering Journal, 67 (6). pp. 467-482.

Ramachandran, G and Kumar, S and Dutta, A and Sinha, C and Chaudhuri, S (2023) Blowoff dynamics of interacting swirl premixed flames. In: AIAA SciTech Forum and Exposition, 2023.

Ramadurgam, Sarath and Chakravarthy, RVK and Tomar, Gaurav and Govindarajan, Rama (2012) Stability of developing film flow down an inclined surface. In: PHYSICS OF FLUIDS, 24 (10).

Ramakrishna, K and Sen, Dibakar (2014) Curvature based mobility analysis and form closure of smooth planar curves with multiple contacts. In: MECHANISM AND MACHINE THEORY, 75 . pp. 131-149.

Ramakrishna, K and Sen, Dibakar (2018) Form-closure of planar mechanisms: Synthesis of number, configuration, and geometry of point contacts. In: MECHANISM AND MACHINE THEORY, 130 . pp. 220-243.

Ramakrishna, K and Sen, Dibakar (2015) Transitory second-order reciprocal connection for two surfaces in point contact. In: MECHANISM AND MACHINE THEORY, 86 . pp. 73-87.

Ramakrishna, K and Sen, Dibakar (2016) A note on enveloping curves in plane. In: MECHANISM AND MACHINE THEORY, 105 . pp. 510-514.

Raman, Adhiti and Ananthasuresh, GK (2015) Improving a Dual-Probe Heat Pulse Based Soil Moisture Sensor Using Insulated Nichrome Wire. In: 2nd International Symposium on Physics and Technology of Sensors, MAR 08-10, 2015, Pune, INDIA, pp. 283-288.

Ramanathan, M and Gurumoorthy, B (2003) Constructing medial axis transform of planar domains with curved boundaries. In: Computer-Aided Design, 35 (7). pp. 619-632.

Ramanathan, M and Gurumoorthy, B (2010) Interior Medial Axis Transform computation of 3D objects bound by free-form surfaces. In: Computer-Aided Design, 42 (12). pp. 1217-1231.

Ramanathan, M and Gurumoorthy, B (2005) A Tracing Algorithm for Constructing Medial Axis Transform of 3D Objects Bound by Free-form Surfaces. In: International Conference on Shape Modeling and Applications, 13-17 June, Cambridge,USA, pp. 226-235.

Ramanathan, M and Pratap, R (2018) Energy Based Design and Validation of Latch MEMS g-Switch. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.

Ramanathan, M and Pratap, R (2019) Integration of a Compliant Thermal Actuator for Unlatching in a Mems Latch Accelerometer. In: 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII, 23 June 2019 - 27 June 2019, Berlin, pp. 515-518.

Ramarajan, S and Rao, SN (1972) Absolute Stability of NLTV Discrete Systems. In: IEEE Transactions on Automatic Control, 17 (1). pp. 139-141.

Ramarajan, S and Rao, SN (1970) Class of linear time-varying discrete systems. In: Electronics Letters, 6 (22). pp. 701-702.

Ramarajan, S and Rao, SN (1971) An Improved Stability Criterion for the Damped Mathieu Equation. In: IEEE Transactions on Automatic Control, 16 (4). pp. 363-364.

Ramasesha, Sheela K and Srikari, Tantri P and Jayasingh, Moses E and Biswas, SK (2000) Effect of densification and TiB2 reinforcement on the wear of molybdenum disilicide. In: Tribology Letters, 8 (4). pp. 219-222.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Micro and macro contact mechanics for interacting asperities. In: Sadhana, 33 (3). pp. 329-338.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Axisymmetric fretting analysis in coated cylinder. In: Sadhana, 33 (3). pp. 299-327.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Near surface stress analysis strategies for axisymmetric fretting. In: Sadhana, 33 (3). pp. 273-297.

Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Wave propagation in coated cylinders with reference to fretting fatigue. In: Sadhana, 33 (3). pp. 339-356.

Ramesh, M and Simha, KRY (2008) Cylindrical crack vis a vis parallel crack pair: shielding, energetics and asymptotics. In: International Journal Of Fracture, 152 (2). pp. 75-95.

Ramesh, M and Simha, KRY and Kailas, Satish V (2006) High Frequency Fretting Fatigue in Cylinders. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Ramesh, NT and Arakeri, JH (2019) Actively and passively aspirated temperature sensors in a windless environment like greenhouses. In: Sadhana - Academy Proceedings in Engineering Sciences, 44 (4).

Ramu, G and Ananthasuresh, GK (2009) A Flexure-based Deployable Stereo Vision Mechanism and Temperature and Force Sensors for Laparoscopic Tools. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Ramulu, Janaki P and Narayanan, Ganesh R and Kailas, Satish V and Reddy, Jayachandra (2013) Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 65 (9-12). pp. 1515-1528.

Ramulu, Perumalla Janaki and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of tool rotation speed and feed rate on the forming limit of friction stir welded AA6061-T6 sheets. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 227 (C3). pp. 520-541.

Ramulu, Perumalla Janaki and Narayanan, Ganesh R and Kailas, Satish V (2013) Forming limit investigation of friction stir welded sheets: influence of shoulder diameter and plunge depth. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (9-12). pp. 2757-2772.

Ramya, E and Munjal, ML (2014) Improved tuning of the extended concentric tube resonator for wide-band transmission loss. In: NOISE CONTROL ENGINEERING JOURNAL, 62 (4). pp. 252-263.

Rana, Moumita and Bharathanatha, RR and Gautam, Ujjal K (2014) Kinetically stabilized C-60-toluene solvate nanostructures with a discrete absorption edge enabling supramolecular topotactic molecular exchange. In: CARBON, 74 . pp. 44-53.

Rana, R and Kumar, S and Muthuveerappan, N (2019) RANS Based Iso-thermal CFD Analysis of the flow field created by a radial swirler in a conical nozzle. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Rana, R and Muthuveerappan, N and Basu, S (2023) CFD Analysis of Primary Air Flow Field of a Swirl Injector Using Embedded LES-Based Hybrid Model. In: 3rd National Aerospace Propulsion Conference, NAPC 2020, 17 - 19 December 2020, Virtual, Online at Bengaluru, pp. 629-646.

Rana, R and Nagalingam, M and Basu, S (2021) Numerical Behaviour of Primary Air Flow Field of A Swirl Injector under High Pressure and High Temperature Condition. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-3 Dec 2021, Virtual, Online.

Ranade, VV and Joshi, JB and Marathe, AG (1989) Flow Generated By Pitched Blade Turbines Ii: Simulation Using Κ-Ε Model. In: Chemical Engineering Communications, 81 . pp. 225-248.

Rangacharyulu, MAV and Srinivasan, P (1973) Approximate Analysis Of Nonlinear Spring Mass Systems Subjected To Step Function Excitation. In: Journal Of The Indian Institute Of Science, 55 (1). pp. 41-50.

Rangacharyulu, MAV and Dasarath, BV (1975) Non-linear systems with quadratic and cubic damping - an analytical approach. In: Journal of Sound and Vibration, 38 (1). pp. 9-13.

Rangacharyulu, MAV and Srinivasan, P (1973) A note on the period of oscillation of non-linear systems. In: Journal of Sound and Vibration, 29 (2). 207 -213.

Rangacharyulu, MAV and Srinivasan, P and Dasarathy, BV (1974) Approximate analysis of coupled non-linear non-conservative systems subjected to step-function excitation. In: Journal of Sound and Vibration, 37 (3). pp. 359-366.

Rangacharyulu, MAV and Srinivasan, P and Dasarathy, BV (1974) Transient response of coupled non-linear non-conservative systems. In: Journal of Sound and Vibration, 37 (4). pp. 467-473.

Ranganath, R and Nair, PS and Mruthyunjaya, TS and Ghosal, A (2004) A force–torque sensor based on a Stewart Platform in a near-singular configuration. In: Mechanism and Machine Theory, 39 (9). pp. 971-998.

Ranganatha, S and Kailas, Satish V and Støren, Sigurd and Srivatsan, TS (2008) Role of temperature on sliding response of aluminum on steel of a hot extrusion. In: Materials and Manufacturing Processes, 23 (1). pp. 29-36.

Ranganatha, S and Kailas, Satish V (2006) Estimation of shear force and morphology of wear track, while sliding hard spherical indenter on soft plate and comparing with experimental results. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Development of high performance electroless Ni-P-HNT composite coatings. In: APPLIED SURFACE SCIENCE, 263 . pp. 149-156.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Electroless Ni-W-P Coating and Its Nano-WS2 Composite: Preparation and Properties. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (23). pp. 7932-7940.

Ranganatha, S and Venkatesha, TV and Vathsala, K (2012) Process and properties of electroless Ni-Cu-P-ZrO2 nanocomposite coatings. In: Materials Research Bulletin, 47 (3). pp. 635-645.

Ranganatha, S and Venkatesha, TV and Vathsala, K and kumar , MKP (2012) Electrochemical studies on Zn/nano-CeO 2 electrodeposited composite coatings. In: Surface and Coatings Technology, 208 . pp. 64-72.

Rangarajan, Ramsharan (2017) On the resolution of certain discrete univariate max–min problems. In: Computational Optimization and Applications, 68 (1). pp. 163-192. ISSN 0926-6003

Rangarajan, Ramsharan and Kabaria, Hardik and Lew, Adrian (2019) An algorithm for triangulating smooth three-dimensional domains immersed in universal meshes. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 117 (1). pp. 84-117.

Rangarajan, Ramsharan and Kabaria, Hardik and Lew, Adrian (2019) An algorithm for triangulating smooth three-dimensional domains immersed in universal meshes. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 117 (1). pp. 84-117.

Rangarajan, Ramsharan and Lew, Adrian J (2017) Provably Robust Directional Vertex Relaxation for Geometric Mesh Optimization. In: SIAM Journal on Scientific Computing, 39 (6). A2438-A2471. ISSN 1064-8275

Rangaswami, K and Hariharan, R (1975) An absolute digital positioning numerical control system. In: International Journal of Electronics, 38 (2). 233 -239.

Rani, MR and Seshan, S (1996) Abrasive Jet Machining - Process variables and current applications. In: Metals Materials and Processes, 7 (4). pp. 279-289.

Rani, RM and Seshan, S (1998) Studies on abrasive jet machining through statistical design of experiments. In: Experimental Techniques, 22 (02). pp. 28-30.

Ranjan, BSC and Vikranth, HN and Ghosal, Ashitava (2013) A Novel Prevailing Torque Threaded Fastener and Its Analysis. In: JOURNAL OF MECHANICAL DESIGN, 135 (10).

Ranjan Parida, D and Dani, N and Basu, S (2021) Data-driven analysis of molten-salt nanofluids for specific heat enhancement using unsupervised machine learning methodologies. In: Solar Energy, 227 . pp. 447-456.

Ranjith, K and Narasimhan, R (1986) Asymptotic and finite element analyses of mode III dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 76 (1). pp. 61-77.

Ranjith, K and Narasimhan, R (1996) Asymptotic and finite element analyses of mode III dynamic crack growth at a ductile-brittle interface. In: International Journal of Fracture, 76 (1). pp. 61-77.

Ranjith, K and Narasimhan, R (1997) Asymptotic fields for dynamic crack growth at a ductile-brittle interface. In: Journal of the Mechanics and Physics of Solids, 45 (1). pp. 67-85.

Ransing, RS and Srinivasan, MN and Lewis, RW (1995) ICADA: Intelligent computer aided defect analysis for castings. In: Journal of Intelligent Manufacturing, 6 (1). pp. 29-40.

Rao, Nalluri SRP and Vani, V and Gurumoorthy, B (1995) A 3D-clipping algorithm for form feature volume extraction. In: Proceedings of the 3rd International Conference, Computer Integrated Manufacturing, 11-14 July 1995, Singapore, pp. 385-393.

Rao, Narasimha KV and Narasimham, CSVL and Murthy, Krishna MV (1993) Parametric study on the bulk hydraircooling of spherical food products. In: AIChE Journal, 39 (11). pp. 1870-1884.

Rao, A and Arakeri, JH (2001) Wave structure in the radial film flow with a circular hydraulic jump. In: Experiments in Fluids, 31 (5). pp. 542-549.

Rao, Arun R and Shrinivasa, U (2002) Towards simulation of elasto-plastic deformation: An investigation. In: Sadhana, 27 . pp. 251-294.

Rao, D Chaitanya Kumar and Karmakar, Srinibas and Basu, Saptarshi (2017) Atomization characteristics and instabilities in the combustion of multi-component fuel droplets with high volatility differential. In: SCIENTIFIC REPORTS, 7 .

Rao, D Chaitanya Kumar and Karmakar, Srinibas and Basu, Saptarshi (2018) Bubble dynamics and atomization mechanisms in burning multi-component droplets. In: PHYSICS OF FLUIDS, 30 (6).

Rao, DCK and Basu, S (2020) Atomization modes for levitating emulsified droplets undergoing phase change. In: Experiments in Fluids, 61 (2).

Rao, DCK and Singh, AP and Basu, S (2022) Laser-induced deformation and fragmentation of droplets in an array. In: International Journal of Multiphase Flow, 148 .

Rao, KR and Shrinivasa, U and Srinivasan, J (1996) Constrained optimization of heat exchangers. In: Chemical Engineering, 103 (6). pp. 112-118.

Rao, Madhusudhana G and Narasimham, GSVL (2007) Laminar conjugate mixed convection in a vertical channel with heat generating components. In: International Journal of Heat and Mass Transfer, 50 (17-18). pp. 3561-3574.

Rao, Mallikarjuna K and Shrinivasa, U (2001) A set of pathological tests to validate new finite elements. In: Sadhana, 26 (6). pp. 549-590.

Rao, Mohan G and Mohan, S and Panchapagesan, TS and Balasubramanian, TV (1992) Microstructure and composition analysis of $Cu-Cu_20$ cermet films deposited by d.c. reactive magnetron sputtering. In: Thin Solid Films, 207 (1-2). pp. 29-32.

Rao, Nalluri SRP and Gurumoorthy, B (1993) Knowledge-based gluing operators for feature-based modelling. In: Computers in Industry, 23 (1-2). pp. 129-138.

Rao, Narasimha KV and Narasimham, GSVL and Murthy, Krishna MV (1993) Analysis of heat and mass transfer during bulk hydraircooling of spherical food products. In: International Journal of Heat and Mass Transfer, 36 (3). pp. 809-822.

Rao, Narasimha KV and Narasimham, GSVL and Murthy, Krishna MV (1992) Analysis of co-current hydraircooling of food products in bulk. In: International Journal of Heat and Fluid Flow, 13 (3). pp. 300-310.

Rao, RR and Prasad, M and Bindagi, SV and Srinivasan, K (1997) Effect of packing density on performance of charcoal-nitrogen adsorption cryocoolers. In: Carbon, 35 (10-11). pp. 1559-1566.

Rao, Radhika Rani and Prasad, Madhu and Srinivasan, Kandadai (2005) Optimum operating conditions for an adsorption cryocooler: a case of activated carbon + nitrogen system. In: Cryogenics, 45 (3). pp. 193-197.

Rao, Radhika Rani and Srinivasan, K (1997) Exergy Diagrams for Nitrogen on ITS-90. In: International Journal of Energy Research, 21 (11). pp. 1053-1059.

Rao, Ramananda R and Shrinivasa, U and Srinivasan, J (1991) Synthesis of Cost-Optimal Shell-and-Tube Heat Exchangers. In: Heat Transfer Engineering, 12 (3). 47 -55.

Rao, SJ and Jain, S and Basu, S (2024) Dynamics of soap bubble inflation. In: Physical Review Fluids, 9 (5).

Rao, SN and Mohamedsanaullah, AG (1978) Analysis and Design of Cushioning in Hydraulic Cylinders. In: Journal of the Indian Institute of Science, 60 (7). 271-282 .

Rao, SN and Srinath, MD (1965) Stability of control systems with time delay. In: Electronics Letters , 1 (8). p. 219.

Rao, Samrat (2016) Sensitivity of the Tropical Easterly Jet to the Distribution and Magnitude of Latent Heating in an Aqua-Planet Model. In: JOURNAL OF THE METEOROLOGICAL SOCIETY OF JAPAN, 94 (4). pp. 371-388.

Rao, Samrat and Srinivasan, Jayaraman (2016) The impact of latent heating on the location and strength of the tropical easterly jet. In: METEOROLOGY AND ATMOSPHERIC PHYSICS, 128 (2). pp. 247-261.

Rao, TR Raghavendra and Biswas, SK (1979) Experimental investigation of die wear in small-batch hammer-forging under unlubricated conditions. In: Journal of Mechanical Working Technology, 3 (2). pp. 137-150.

Rao, VK (1978) A note on turbulent swirling flows. In: AIAA Journal, 16 (4). pp. 409-411.

Rao, VM and Ananthasuresh, GK (2009) Haptic Feedback for Injecting Biological Cells using Miniature Compliant Mechanisms. In: 14th National Conference on Machines and Mechanisms (NaCoMM-09), December 17-18, 2009, NIT-Durgapur, India.

Rao Bapat, VAchyuta and Srinivasana, P (1968) Response spectrum of non-linear spring mass system subjected to transient disturbances. In: Journal of Sound and Vibration, 8 (3). pp. 482-487.

Rasheed, A and Hegde, O and Chatterjee, R and Sampathirao, SR and Chakravortty, D and Basu, S (2023) Physics of self-assembly and morpho-topological changes of Klebsiella pneumoniae in desiccating sessile droplets. In: Journal of Colloid and Interface Science, 629 . pp. 620-631.

Rasheed, A and Poopady, JJ and Chakravortty, D and Basu, S (2025) Insights into surrogate respiratory droplet behaviour on inclined surfaces: Implications for disease transmission. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 705 .

Rathnasamy, R and Arakeri, JH and Srinivasan, K (2005) Experimental investigation of fluid flow in long rectangular micro-channels. In: Proceedings of the institution of Mechanical Engineers Part E-Journal of Process Mechnical Engineering, 219 (E3). pp. 227-235.

Rathnasamy, R and Arakeri, JH and Srinivasan, K (2005) Experimental investigation of forced convective heat transfer to air, liquids, and liquid mixtures in a long narrow channel. In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (4). pp. 311-317.

Rathod, Mitesh L and Pareek, Nikhil and Agrawal, Suchi S and Jaddivada, Siddhartha and Lee, Dong W and Gundiah, Namrata (2017) Engineered ridge and micropillar array detectors to quantify the directional migration of fibroblasts. In: RSC ADVANCES, 7 (81). pp. 51436-51443.

Raut, D and Tandaiya, P and Ramamurty, U (2017) Mixed-mode fracture studies of plastic bulk metallic glass. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 470-471.

Ravi, B and Srinivasan, MN (1990) Computer aided parting surface generation. In: Proceedings of Manufacturing International '90, 25-28 March 1990, Atlanta, GA, USA, pp. 125-129.

Ravi, B and Srinivasan, MN (1990) Decision criteria for computer-aided parting surface design. In: Computer-Aided Design, 22 (1). pp. 11-18.

Ravi, B and Srinivasan, MN (1990) Hot spots in castings: computer-aided location and experimental validation. In: Transactions of the American Foundrymen's Society, 98 . pp. 353-357.

Ravi, VC and Rakshit, Subrata and Ghosal, Ashitava (2010) Redundancy resolution using tractrix -- Simulations and Experiments. In: ASME Journal of Mechanisms and Robotics, 2 (3). 031013-1.

Ravichandran, NK and Broido, D (2021) Exposing the hidden influence of selection rules on phonon�phonon scattering by pressure and temperature tuning. In: Nature Communications, 12 (1).

Ravichandran, NK and Broido, D (2020) Phonon-Phonon Interactions in Strongly Bonded Solids: Selection Rules and Higher-Order Processes. In: Physical Review X, 10 (2).

Ravikiran, A and Bai, Pramila BN (1995) Influence of Speed on the Tribochemical Reaction Products and the Associated Transitions for the Dry Sliding of Silicon Nitride against Steel. In: Journal of the American Ceramic Society, 78 (11). pp. 3025-3032.

Ravikiran, A and Bai, Pramila BN (1993) High speed sliding of $Al_2O_3$ pins against an En-24 steel disc. In: Wear, 162-16 (1). pp. 296-304.

Ravikiran, A and Bai, Pramila BN (1995) Observations on the role of the steel disc counterface during the sliding of various structural ceramics. In: Wear, 181 (part 2). pp. 544-550.

Ravikiran, A and Bai, Pramila BN (1995) Sliding wear of YTZP ceramic against steel: observations on ceramic transfer and wear transition. In: Journal of Materials Science (full set), 30 (8). pp. 1999-2007.

Ravikiran, A and Bai, Pramila BN (1994) Water-lubricated sliding of $Al_2O_3$ against steel. In: Wear, 171 (1-2). pp. 33-39.

Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.

Ravikiran, A and Nagarajan, VS and Biswas, SK and Bai, Pramila BN (1995) Effect of Speed and Pressure on Dry Sliding Interactions of Alumina against Steel. In: Journal of the American Ceramic Society, 78 (2). 356-364 .

Ravikiran, A and Natarajan, KN and Biswas, SK and Bai, Pramila BN (1990) Erosion studies on hyper steel and high chrome cast iron. In: Wear, 141 (1). pp. 85-94.

Ravikiran, A and Subbanna, GR and Bai, Pramila BN (1996) Effect of interface layers formed during dry sliding of zirconia toughened alumina (ZTA) and monolithic alumina against steel. In: Wear, 192 (1-2). pp. 56-65.

Ravikrishna, RV and Naik, Sameer V and Cooper, CS and Laurendeau, Normand M (2004) Quantitative Laser-Induced Fluorescence Measurements and Modeling of Nitric Oxide in High-Pressure (6-15 atm) Counterflow Diffusion Flames. In: Combustion Science and Technology, 176 (1). pp. 1-21.

Ravikrishna, RV (2007) Reacting Flow Simulations with Detailed Chemistry: Applications in IC Engines & Gas Turbines. In: Seventh Asian CFD Conference, , 2007, Bangalore, India.

Ravikrishna, RV (2019) Trapped vortex combustion: Insights from laser diagnostics & Numerical simulations. In: Asia-Pacific Conference on Combustion, 1-5 July 2019, Japan.

Ravikrishna, RV and Laurendeau, NM (2003) Evaluation of nitric oxide kinetics in high-pressure flames (up to 5 atm). In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 217 (5). pp. 529-536.

Ravikrishna, RV and Sahu, AB (2018) Advances in understanding combustion phenomena using non-premixed and partially premixed counterflow flames: A review. In: INTERNATIONAL JOURNAL OF SPRAY AND COMBUSTION DYNAMICS, 10 (1). pp. 38-71.

Ravindran, K (1994) Finite element study on the role of convection in laser surface melting. In: Numerical Heat Transfer Part A: Applications, 26 (5). pp. 601-618.

Ravindran, K and Srinivasan, J and Marathe, AG (1995) Role of surface tension driven convection in pulsed - laser melting and solidification. In: Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 209 (1). pp. 75-82.

Ravindran, K. and Srinivasan, J and Marathe, AG (1995) Finite Element Solution Of Surface-Tension Driven Flows In Laser Surface-Melting. In: Mechanics Research Communications, 22 (3). pp. 297-304.

Ravisankar, R and Mruthyunjaya, TS (1985) Computerized synthesis of the structure of geared kinematic chains. In: Mechanism and Machine Theory, 20 (5). pp. 367-387.

Ravishankar, AS and Ghosal, Ashitava (1999) Nonlinear dynamics and chaotic motions in feedback-controlled two- and three-degree-of-freedom robots. In: The International Journal of Robotics Research, 18 (1). pp. 93-108.

Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2012) AIWIN - A fast and jigless inspection technique for machined parts. In: International Journal of Advanced Manufacturing Technology, 62 (1-4). pp. 231-240.

Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2010) Automated inspection of aircraft parts using a modified ICP algorithm. In: The International Journal of Advanced Manufacturing Technology, 46 (1-4). pp. 227-236.

Raya, Subhashis and Srinivasan, J (1992) Analysis of conjugate laminar mixed convection cooling in a shrouded array of electronic components. In: International Journal of Heat and Mass Transfer, 35 (4). pp. 815-822.

Reddy, KS and Khan, RH and Murthy, KSS (1979) Application of Ultrasonics in Determining the Structural and Mechanical Properties of Cast Iron. In: Transactions of the Indian Institute of Metals, 32 (4). pp. 337-343.

Reddy, PV and Murthy, Srinivasa N (1987) Some observations on cold casting of Araldite sheets for photoelastic analysis. In: Journal of Indian Institute of Science, 67 (3-4). pp. 115-118.

Reddy, Sandeep B and Ghosal, Ashitava (2015) Nonlinear Dynamics of a Rotating Flexible Link. In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 10 (6).

Reddy, A Narayana and Ananthasuresh, GK (2008) On computing the forces from the noisy displacement data of an elastic body. In: International Journal For Numerical Methods In Engineering, 76 (11). pp. 1645-1677.

Reddy, Annem Narayana and Maheshwari, Nandan and Sahu, Deepak Kumar and Ananthasuresh, GK (2010) Miniature Compliant Grippers With Vision-Based Force Sensing. In: IEEE Transactions on Robotics, 26 (5). pp. 867-877.

Reddy, B Sandeep and Ghosal, Ashitava (2017) Chaotic Motion in a Flexible Rotating Beam and Synchronization. In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 12 (4, SI).

Reddy, B Sandeep and Ghosal, Ashitava (2018) Robustness Analysis of a Simple and Augmented Proportional Plus Derivative Controller in Trajectory Following Robots Using the Floquet Theory. In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 13 (7).

Reddy, BS and Simha, KRY and Ghosal, A (1999) Free and forced vibration of a kinked cantilever beam. In: ASME 1999 Design Engineering Technical Conferences, DETC 1999, 12-16 Sep 1999, Las Vegas; United States, pp. 169-177.

Reddy, BSY and Simha, KRY and Ghosal, A (1999) Free vibration of a kinked cantilever with attached masses. In: Journal of The Acoustical Society of America, 105 (1). pp. 164-173.

Reddy, Bhupal and Bhattacharya, P and Singh, Bawa and Chattopadhyay, K (2009) The effect of ball milling on the melting behavior of Sn-Cu-Ag eutectic alloy. In: Journal of Materials Science, 44 (9). pp. 2257-2263.

Reddy, CK and Pratap, R (2000) Can a passive hopper hop forever? In: Current Science, 79 (5). pp. 639-645.

Reddy, CK and Pratap, R (2000) Equivalent Viscous Damping for A Bilinear Hysteretic Oscillator. In: Journal of Engineering Mechanics-ASCE, 126 (11). pp. 1189-1196.

Reddy, CK and Pratap, R (2003) Multimodal map and complex basin of attraction of a simple hopper. In: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 68 (1). pp. 16220-8.

Reddy, CK and Pratap, R (2001) A Passive Hopper With Lossless Collisions. In: IUTAM Symposium on Nonlinearity and Stochastic Structural Dynamics, 85 . pp. 209-220.

Reddy, Jayaprakash and Pratap, Rudra (2016) Si-gold-glass hybrid wafer bond for 3D-MEMS and wafer level packaging. In: JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 27 (1).

Reddy, Mohan R and Praveen, BM and Chandrappa, KG and Nayana, KO (2016) Generation of Ni-Si3N4 nanocomposites by DC, PC and PRC electrodeposition methods. In: SURFACE ENGINEERING, 32 (7). pp. 501-507.

Reddy, Narayana A and Ananthasuresh, GK (2012) A numerical approach to determine the sufficiency of given boundary data sets for uniquely estimating interior elastic properties. In: Inverse Problems in Science and Engineering, 20 (7). pp. 1057-1077.

Reddy, Sandeep B and Ghosal, Ashitava (2016) Asymptotic Stability and Chaotic Motions in Trajectory Following Feedback Controlled Robots. In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 11 (5).

Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1995) Mechanism of seizure of aluminium-silicon alloys dry sliding against steel. In: Wear, 181 (part 2). pp. 658-667.

Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1994) Wear and seizure of binary Al---Si alloys. In: Wear, 171 (1-2). pp. 115-127.

Reddy, Venkata P and Narasimham, GSVL and Rao, Raghurama SV and Johny, T and Kasiviswanathan, KV (2010) Non-Boussinesq conjugate natural convection in a vertical annulus. In: International Communications in Heat and Mass Transfer, 37 (9). pp. 1230-1237.

Rehal, A and Sen, D (2023) An Efficient Disassembly Sequencing Scheme Using the Shell Structure. In: CAD Computer Aided Design, 154 .

Rehal, A and Sen, D (2023) Generation of Homotopy Classes for Unconstrained 3D Wire Routing from Characteristic Loops. In: CAD Computer Aided Design, 164 .

Rehman, Nidhil M A and Kumar, Anuj and Shukla, Ratnesh K (2017) Influence of hydrodynamic slip on convective transport in flow past a circular cylinder. In: THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 31 (3). pp. 251-280.

Rohatgi, PK and Bhutani, AK and Abraham, KP (1979) Directional solidification of aluminum-nickel eutectic alloys using electroslag remelting. In: Metallurgical Transactions. Physical Metallurgy and Material, 10 (3). pp. 333-342.

Rohatgi, PK and Pai, BC (1974) Effect of microstructure and mechanical properties on the seizure resistance of cast aluminium alloys. In: Wear, 28 (3). pp. 353-367.

Rohatgi, PK and Prabhakar, KV (1975) Wrought aluminum-nickel alloys for high strength-high conductivity applications. In: Metallurgical Transactions, 6 (4). pp. 1003-1008.

Rohatgi, PK and Satyanarayana, KG and Cheriyan, J and Nagaraj, B and Sastri, P and Seshan, S (1981) Research and Production Imperatives in Aluminum Towards the Year 2000. In: Journal of Scientific & Industrial Research, 40 (2). pp. 99-109.

Rohatgi, PK and Sharma, RC and Prabhakar, KV (1975) Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutectic. In: Metallurgical Transactions, 6 (3). pp. 569-575.

Rohatgi, PK and Vyas, BJ and Bowonder, B (1978) Foundry industry of india towards year 2000 - Technological-forecasting. In: Journal of Scientific & Industrial Research (JSIR), 37 (1). pp. 1-16.

Rokkala, U and Bontha, S and Ramesh, MR and Balla, VK and Srinivasan, A and Kailas, SV (2021) Tailoring surface characteristics of bioabsorbable Mg-Zn-Dy alloy using friction stir processing for improved wettability and degradation behavior. In: Journal of Materials Research and Technology, 12 . pp. 1530-1542.

Roy, Deb T (2003) Computational modeling: a path to expand the knowledge base in fusion welding. In: Indian Welding Journal, 36 (3). pp. 59-66.

Roy, AC and Kumar, N and Shreyas, BS and Gupta, A and Kumar, A and Venkataraman, V (2021) Optical soft artificial skin. In: Frontiers in Optics + Laser Science 2021, FiO+LS 2021 - Part of Frontiers in Optics, FiO 2021, 4-5 November 2021, New york, Virtual, Online.

Roy, AC and Kumar, N and Subramanya, SB and Gupta, A and Kumar, A and Bid, A and Venkataraman, V (2022) Large-Area 3D Printable Soft Electronic Skin for Biomedical Applications. In: ACS Biomaterials Science and Engineering .

Roy, Arjun and Chatterjee, Anindya (2009) Vibrations of a Beam in Variable Contact With a Flat Surface. In: Journal of Vibration and Acoustics, 131 (4).

Roy, Arun Y and Narasimhan, R (1999) Constraint effects on ductile fracture processes near a notch tip under mixed-mode loading. In: Engineering Fracture Mechanics, 62 (6). pp. 511-534.

Roy, Arun Y and Narasimhan, R (1999) A finite element investigation of the effect of crack tip constraint on hole growth under mode I and mixed mode loading. In: International Journal of Solids and Structures, 36 (10). pp. 1427-1447.

Roy, Arun Y and Narasimhan, R and Arora, PR (1999) An Experimental Investigation Of Constraint Effects On Mixed Mode Fracture Initiation In A Ductile Aluminium Alloy. In: Acta Materialia, 47 (5). pp. 1587-1596.

Roy, Chowdhury S and Narasimhan, R (2000) A finite element analysis of quasistatic crack growth in a pressure sensitive constrained ductile layer. In: Engineering Fracture Mechanics, 66 (6). pp. 551-571.

Roy, D and Basu, S (2024) Future research perspective on the interfacial physics of non-invasive glaucoma testing in pathogen transmission from the eyes. In: Biointerphases, 19 (1).

Roy, D and Sophia, M and Basu, S (2023) On the mechanics of droplet surface crater during impact on immiscible viscous liquid pool. In: Journal of Fluid Mechanics, 955 .

Roy, D and Sophia, M and Rao, SS and Basu, S (2022) Droplet impact on immiscible liquid pool: Multi-scale dynamics of entrapped air cushion at short timescales. In: Physics of Fluids, 34 (5).

Roy, D and Sophia, M and Rasheed, A and Kabi, P and Roy, AS and Shetty, R and Basu, S (2021) Fluid dynamics of droplet generation from corneal tear film during non-contact tonometry in the context of pathogen transmission. In: Physics of Fluids, 33 (9).

Roy, D and c, S (2022) On the thermofluidics of a steady laminar jet impacting on a rotating hot plate: An ab initio scaling perspective. In: AIP Advances, 12 (8).

Roy, Y Arun and Narasimhan, R (1998) J-Dominance in mixed mode ductile fracture specimens. In: International Journal of Fracture, 88 (03). pp. 259-279.

Roychowdhury, A and Nandy, A and Jog, CS and Pratap, R (2015) Hybrid Elements for Modelling Squeeze Film Effects Coupled with Structural Interactions in Vibratory MEMS Devices. In: CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 103 (2). pp. 91-110.

Roychowdhury, AP and Srinivasan, J (1995) Effect of wall emissivities on radiation heat transfer in glass tank forehearths. In: Warme und Stoffubertragung-Thermo & Fluid Dynamics, 31 (1-2). pp. 11-15.

Rudra, Pratap (2003) Some issues in mechanical design of MEMS transducers. In: SPIE:Smart Materials, Structures, and Systems, 12-14 December, Bangalore, India, Vol.5062, 788-793.

S

SK, Biswas and Kalyani, Vijayan (1992) Friction and wear of PTFE — a review. In: Wear, 158 (1-2). pp. 193-211.

SK, Sinha and SK, Biswas (1992) Friction and wear behaviour of continuous fibre as cast Kevlar-phenolic resin composite. In: Journal of Materials Science, 27 (11). pp. 3085-3091.

Sadashive, Gowada B and Narashimam, GSVL and Krishna Murthy, MV (1998) Time-temperature histories of spherical food products during bulk forced-air precooling. In: JSME international journal. Series B, Fluids and thermal engineering, 41 (04). pp. 895-907.

Saei, Mojib and Udupa, Anirudh and Viswanathan, Koushik and Sugihara, Tatsuya and M'Saoubi, Rachid and Chandrasekar, Srinivasan (2019) Controlling segmentation in cutting of metals. In: CIRP ANNALS-MANUFACTURING TECHNOLOGY, 68 (1). pp. 41-44.

Sagapuram, D and Udupa, A and Viswanathan, K and Mann, JB and M'Saoubi, R and Sugihara, T and Chandrasekar, S (2020) On the Cutting of Metals: A Mechanics Viewpoint. In: Journal of Manufacturing Science and Engineering, Transactions of the ASME, 142 (11).

Sagapuram, Dinakar and Viswanathan, Koushik (2018) Evidence for Bingham plastic boundary layers in shear banding of metals. In: EXTREME MECHANICS LETTERS, 25 . pp. 27-36.

Sagapuram, Dinakar and Viswanathan, Koushik (2018) Viscous Shear Banding in Cutting of Metals. In: JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 140 (11).

Sagapuram, Dinakar and Viswanathan, Koushik and Trumble, Kevin P and Chandrasekar, Srinivasan (2018) A common mechanism for evolution of single shear bands in large-strain deformation of metals. In: PHILOSOPHICAL MAGAZINE, 98 (36, A). pp. 3267-3299.

Sagar, RV and Prasad, BKR and Singh, RK (2015) 7 - Laboratory investigations on concrete fracture using acoustic emission techniques∗. [Book Chapter]

Sagar, Vidya and Munjal, M L (2017) Analysis and design guidelines for fork muffler with H-connection. In: APPLIED ACOUSTICS, 125 . pp. 49-58.

Sagar, Vidya and Munjal, ML (2016) Design and analysis of a novel muffler for wide-band transmission loss, low back pressure and reduced flow-induced noise. In: NOISE CONTROL ENGINEERING JOURNAL, 64 (2). pp. 208-216.

Sagar, Vidya R and Prasad, Raghu BK and Kumar, Shantha S (2012) An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique. In: CEMENT AND CONCRETE RESEARCH, 42 (8). pp. 1094-1104.

Saha, A and Basu, S and Kumar, R (2012) Levitated droplet evaporation: scaling analysis for equivalence between radiative and convective heating. In: 9th European Fluid Mechanics Conference, September 9-13, 2012, Rome, Italy.

Saha, A and Deepu, P and Basu, S (2017) Transport Phenomena in Functional Droplets. [Book Chapter]

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Effects of acoustic-streaming-induced flow in evaporating nanofluid droplets. In: Journal of Fluid Mechanics, 692 . pp. 207-219.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Particle image velocimetry and infrared thermography in a levitated droplet with nanosilica suspensions. In: Experiments in Fluids, 52 (3). pp. 795-807.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Scaling analysis: Equivalence of convective and radiative heating of levitated droplet. In: APPLIED PHYSICS LETTERS, 100 (20).

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Thermally induced breakup of levitated droplet. In: 12th International Conference on Liquid Atomization and Spray Systems, September 2-6, 2012, Heidelberg, Germany.

Saha, Abhishek and Basu, Saptarshi and Kumar, Ranganathan (2012) Velocity and rotation measurements in acoustically levitated droplets. In: PHYSICS LETTERS A, 376 (45). pp. 3185-3191.

Saha, Abhishek and Basu, Saptarshi and Suryanarayana, C and Kumar, Ranganathan (2010) Experimental analysis of thermo-physical processes in acoustically levitated heated droplets. In: International Journal of Heat and Mass Transfer, 53 (25-26). pp. 5663-5674.

Saha, Abhishek and Lee, Joshua D and Basu, Saptarshi and Kumar, Ranganathan (2012) Breakup and coalescence characteristics of a hollow cone swirling spray. In: PHYSICS OF FLUIDS, 24 (12).

Saha, BB and El-Sharkawy, II and Chakraborty, A and Koyama, S and Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2006) Evaluation of minimum desorption temperatures of thermal compressors in adsorption refrigeration cycles. In: International Journal of Refrigeration, 29 (7). pp. 1175-1181.

Saha, Bidyut Baran and Chakraborty, Anutosh and Koyama, Shigeru and Srinivasan, Kandadai and Choon Ng, Kim and Dutta, Pradip (2007) Thermodynamic formalism of minimum heat source temperature for driving advanced adsorption cooling device. In: Applied Physic Letters, 91 (11). 111902-1-111902-3.

Saha, S and Srinivasan, K and Dutta, P and Nayak, KC (2006) Cooling of Electronics using Phase Change Materials and Thermal Conductivity Enhancers. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.

Saha, SK and Dutta, P (2011) Effect of Melt Convection on The Optimum Thermal Design Of Heat Sinks With Phase Change Material. In: Journal of Enhanced Heat Transfer, 18 (3). pp. 249-259.

Saha, SK and Dutta, P (2010) Heat transfer correlations for PCM-based heat sinks with plate fins. In: 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, MAY 10-13, 2009 , Rome, pp. 2485-2491.

Saha, SK and Dutta, Pradip (2008) Role of Melt Convection on the Thermal Performance of Heat Sinks with Phase Change Material. In: 10th Electronics Packing Technology Conference, DEC 09-12, 2008, Singapore, Singapore, pp. 539-544.

Saha, SK and Murthy, BB and Dutta, P (2008) Cooling of Electronics using Phase Change Materials under Cyclic Loading. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.

Saha, SK and Srinivasan, K and Dutta, P (2008) Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials. In: Journal of Heat Transfer, 130 (3). 034505-1-034505-4.

Saha, Sandip K. and Dutta, Pradip (2013) Role of melt convection on optimization of PCM-based heat sink under cyclic heat load. In: Heat Transfer Engineering, 34 (11-12). pp. 950-958.

Saha, Sandip Kumar and Dutta, Pradip (2015) Performance Analysis of Heat Sinks With Phase-Change Materials Subjected to Transient and Cyclic Heating. In: HEAT TRANSFER ENGINEERING, 36 (16). pp. 1349-1359.

Saha, Sandip Kumar and Dutta, Pradip (2012) Thermal Management of Electronics Using PCM-Based Heat Sink Subjected to Cyclic Heat Load. In: IEEE Transactions on Components, Packaging, and Manufacturing Technology Part C, 2 (3). pp. 464-473.

Saha, TK and Soundranayagam, S (1996) Performance of a mixed flow pump with varying tip clearance .1. In: Proceedings of the Institution of Mechanical Engineers - Part A: Journal of Power and Energy, 210 (4). pp. 305-318.

Sahasrabudhe, AD and Munjal, ML and Ramu, Anantha S (1995) Analysis of Intertance Due to the Higher Order Mode Effects in a Sudden Area Discontinuity. In: Journal of Sound and Vibration, 185 (3). pp. 515-529.

Sahasrabudhe, AD and Ramu, Anantha S and Munjal, ML (1991) Matrix condensation and transfer matrix techniques in the 3-D analysis of expansion chamber mufflers. In: Journal of Sound and Vibration, 147 (3). pp. 371-394.

Sahoo, Niranjan and Saravanan, S and Jagadeesh, G and Reddy, KPJ (2006) Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel. In: Sadhana, 31 (Part 5). pp. 557-581.

Sahoo, RR and Biswas, SK (2014) Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases. In: TRIBOLOGY LETTERS, 53 (1). pp. 157-171.

Sahoo, Rashmi R and Biswas, SK (2009) Frictional response of fatty acids on steel. In: Journal of Colloid and Interface Science, 333 (2). pp. 707-7148.

Sahoo, Rashmi R and Biswas, Sanjay K (2010) Deformation and friction of MoS2 particles in liquid suspensions used to lubricate sliding contact. In: Thin Solid Films, 518 (21). pp. 5995-6005.

Sahoo, Rashmi R and Biswas, Sanjay K (2010) Microtribology and Friction-Induced Material Transfer in Layered MoS2 Nanoparticles Sprayed on a Steel Surface. In: Tribology Letters, 37 (2). pp. 313-326.

Sahoo, Rashmi R and Math, Souvik and Biswas, SK (2010) Mechanics of Deformation under Traction and Friction of a Micrometric Monolithic MoS2 Particle in Comparison with those of an Agglomerate of Nanometric MoS2 Particles. In: Tribology Letters, 37 (2). pp. 239-249.

Sahu, A B and Markandeya, S and Ravikrishna, R V (2017) Extinction Studies Of Furanic Fuels Using Counterflow Diffusion Flames. In: 9th International Conference on Modeling and Diagnostics for Advanved Engine Systems, COMODIA 2017, 25 - 28 July 2017, Okayama, C206.

Sahu, AB and Krishna, S and Ravikrishna, RV (2017) Quantitative OH measurements and numerical investigation of H-2/CO kinetics in syngas-air counterflow diffusion flames. In: FUEL, 193 . pp. 119-133.

Sahu, AB and Markendaya, SVS and Badhuk, P and Ravikrishna, RV (2020) Experiments and Kinetic Modeling of Diffusion Flame Extinction of 2-Methylfuran, 2,5-Dimethylfuran, and Binary Mixtures with Isooctane. In: Energy and Fuels, 34 (2). pp. 2293-2303.

Sahu, AB and Ravikrishna, RV (2015) Effect of H-2/CO Composition on Extinction Strain Rates of Counterflow Syngas Flames. In: ENERGY & FUELS, 29 (7). pp. 4586-4596.

Sahu, AB and Ravikrishna, RV (2014) A detailed numerical study of NOx kinetics in low calorific value H-2/CO syngas flames. In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 39 (30). pp. 17358-17370.

Sahu, Amrit Bikram and Ravikrishna, RV (2016) Quantitative LIF measurements and kinetics assessment of NO formation in H-2/CO syngas-air counterflow diffusion flames. In: COMBUSTION AND FLAME, 173 . pp. 208-228.

Sahu, DK and Ananthasuresh, GK (2008) Optimal Design of a Meso-scale Gripper and its Prototyping with Spring Steel and PDMS. In: CD-ROM proceedings of ISSS 2008, International Conference on Smart Materials, Structures, and Systems, July 24-26, 2008, Bangalore, July 24-26, 2008, Bangalore.

Sain, Trisha and Narasimhan, R (2011) Constitutive modeling of ice in the high strain rate regime. In: International Journal of Solids and Structures, 48 (5). pp. 817-827.

Samal, Prasanta Kumar and Malik, Pramod Kumar and Babu, Avinash and Shanthakumar, GC (2014) Fabrication and Experimentation of a Cantilever Beam Based Piezoelectric Actuator and Sensor for Vibration Energy Harvesting. In: 16th International Mechanical Engineering Congress (IMEC), JUN 13-15, 2014, Tamil Nadu, INDIA, pp. 2297-2302.

Samanta, SK and Chattopadhyay, H and Dutta, P and Barman, N and Das, Prosenjit (2012) Rheological characterization of semi-solid A356 aluminium alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites, 8-11 October, 2012, Cape Town, South Africa.

Samantaray, Dipti and Borah, Utpal and Bhaduri, AK and Dutta, Pradip (2015) Effect of semi-solid heat treatment on elevated temperature plasticity of 304L stainless steel. In: JOURNAL OF MATERIALS SCIENCE, 51 (9). pp. 4306-4319.

Samantaray, Dipti and Chaudhuri, Atanu and Borah, Utpal and Bhaduri, AK and Dutta, Pradip (2016) Role of grain boundary ferrite layer in dynamic recrystallization of semi-solid processed type 304L austenitic stainless steel. In: MATERIALS LETTERS, 179 . pp. 65-68.

Samantaray, Dipti and Kumar, Vinod and Bhaduri, AK and Dutta, Pradip (2014) Formation of annular austenitic ring between outer ferrite layer and solid globule in a semi-solid processed SS 304L. In: MATERIALS LETTERS, 135 . pp. 127-130.

Sambamurthy, NB and Shaija, A and Narasimham, GSVL and Murthy, MV Krishna (2008) Laminar conjugate natural convection in horizontal annuli. In: International Journal of Heat and Fluid Flow, 29 (5). pp. 1347-1359.

Samudre, P and Kailas, SV (2022) Thermal performance enhancement in open-pore metal foam and foam-fin heat sinks for electronics cooling. In: Applied Thermal Engineering, 205 .

Samuel, Mathews P and Mukhopadhyay, Chiranjit and Shankar, Venkataraman (2006) Failure Mode Identification and Data Preparation for Aeroengine Reliability Studies. In: Presented in International Conference on Industrial Tribology held in Department of Mechanical Engineering, November 30–December 2 2006, IISc.

Sanadi, Dilip and Rajamanickam, Kuppuraj and Basu, Saptarshi (2017) ANALYSIS OF HOLLOW-CONE SPRAY INJECTED IN AN UNCONFINED, ISOTHERMAL, COANNULAR SWIRLING JET ENVIRONMENT. In: ATOMIZATION AND SPRAYS, 27 (1). pp. 7-29.

Sanan, Siddharth and Singh, Sarthj and Madhava Krishna, K (2007) Controlling an Actively Articulated Suspension Vehicle for Mobility in Rough Terrain. In: 10th International Conference on Climbing and Walking Robots (CLAWAR 2007), Jul. 16-18,2007, Singapore.

Sangamesh, Deepak R and Ghosal, Ashitava (2006) A Note on the Diagonalizability and the Jordan Form of the 4×4 Homogeneous Transformation Matrix. In: Journal of Mechanical Design, 128 (6). pp. 1343-1348.

Sankar, B and Saravanan, M and Kumar, K and Dubakka, S (2023) Transforming Pixels into a Masterpiece: AI-Powered Art Restoration using a Novel Distributed Denoising CNN (DDCNN). In: 3rd International Conference on Emerging Techniques in Computational Intelligence, ICETCI 2023, 21-23 septembar 2023, Hyderabad, pp. 164-175.

Sankar, B and Sen, D (2023) A Novel Version Control Scheme for Supporting Interrupted Product Concept Sketching. In: 9th International Conference on Research into Design, ICoRD 2023, 9 January 2023through 11 January 2023, Bangalore, pp. 395-411.

Sankarasubramanian, R and Jog, CS and Abinandanan, TA (2002) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity. In: Metallurgical and Materials Transactions A, 33 (4). pp. 1083-1090.

Santhanam, S (2000) An elastic-viscoplastic constitutive model for the hot-forming of aluminum alloys. In: Journal of Materials Science (full set), 35 (14). 3647 -3654.

Santhosh, AK and Jog, CS (2022) A monolithic finite element strategy for conjugate heat transfer. In: Sadhana - Academy Proceedings in Engineering Sciences, 47 (4).

Santhosh, R and Basu, Saptarshi (2015) Acoustic response of vortex breakdown modes in a coaxial isothermal unconfined swirling jet. In: PHYSICS OF FLUIDS, 27 (3).

Santhosh, R and Basu, Saptarshi (2016) Transitions and blowoff of unconfined non-premixed swirling flame. In: COMBUSTION AND FLAME, 164 . pp. 35-52.

Santhosh, R and Miglani, Ankur and Basua, Saptarshi (2013) Transition and acoustic response of recirculation structures in an unconfined co-axial isothermal swirling flow. In: PHYSICS OF FLUIDS, 25 (8).

Santhosh, R and Miglani, Ankur and Basua, Saptarshi (2014) Transition in vortex breakdown modes in a coaxial isothermal unconfined swirling jet. In: PHYSICS OF FLUIDS, 26 (4).

Santra, Sangeeta and Paul, Aloke (2017) Role of Zr on growth kinetics and microstructural evolution of the superconductor V3Ga by the bronze technique. In: PHILOSOPHICAL MAGAZINE LETTERS, 97 (2). pp. 58-65.

Sanyal, A and Basu, S and Kumar, P (2014) Adsorption study of silica gel particle for improvement in design of adsorption beds used in solar driven cooling units. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 656-665.

Sanyal, Anuradha and Srinivasan, Kandadai and Dutta, Pradip (2009) Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets. In: IIEEE Transactions on Components and Packaging Technologies, 32 (4). pp. 859-867.

Sanyal, Apratim and Basu, Saptarshi (2018) Evaporation excites temporal sequence of resonant modes in a sessile droplet perturbed at constant frequency - Insights into the universal dynamics of mode transitions. In: CHEMICAL ENGINEERING SCIENCE, 176 . pp. 294-305.

Sanyal, Apratim and Basu, Saptarshi (2017) Evolution of internal flows in mechanically oscillating sessile droplets undergoing evaporation. In: CHEMICAL ENGINEERING SCIENCE, 163 . pp. 179-188.

Sanyal, Apratim and Basu, Saptarshi (2016) How Natural Evaporation Temporally Self-Tunes an Oscillating Sessile Droplet To Resonate at Different Modes. In: LANGMUIR, 32 (19). pp. 4784-4791.

Sanyal, Apratim and Basu, Saptarshi and Chaudhuri, Swetaprovo (2015) Agglomeration front dynamics: Drying in sessile nano-particle laden droplets. In: CHEMICAL ENGINEERING SCIENCE, 123 . pp. 164-169.

Sanyal, Apratim and Basu, Saptarshi and Chaudhuri, Swetaprovo (2016) Controlling particle deposit morphologies in drying nano-particle laden sessile droplets using substrate oscillations. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 18 (21). pp. 14549-14560.

Sanyal, Apratim and Basu, Saptarshi and Chowdhuri, Subham and Kabi, Prasenjit and Chaudhuri, Swetaprovo (2014) Precision control of drying using rhythmic dancing of sessile nanoparticle laden droplets. In: APPLIED PHYSICS LETTERS, 104 (16).

Sanyal, Apratim and Basu, Saptarshi and Kumar, Ranganathan (2014) Experimental analysis of shape deformation of evaporating droplet using Legendre polynomials. In: PHYSICS LETTERS A, 378 (5-6). pp. 539-548.

Saravanan, RA and Samajdar, I and Surappa, MK (1998) Microstructural characterisation of the subsurface plastic zone formed during erosion of A356 AI alloy and composites. In: Wear, 215 (1-2). pp. 223-231.

Saravanan, RA and Surappa, MK and Bai, BNP (1997) Erosion of A356 $Al-SiC_{\mu}$ composites due to multiple particle impact. In: Wear, 202 (2). pp. 154-164.

Sarika, CK and Tomar, Gaurav and Basu, JK (2016) Pattern formation in thin films of polymer solutions: Theory and simulations. In: JOURNAL OF CHEMICAL PHYSICS, 144 (2).

Sarika, CK and Tomar, Gaurav and Basu, JK and Thiele, Uwe (2015) Bimodality and re-entrant behaviour in the hierarchical self-assembly of polymeric nanoparticles. In: SOFT MATTER, 11 (46). pp. 8975-8980.

Sarkar, A and Sonti, VR (2009) Asymptotic analysis for the coupled wavenumbers in an infinite fluid-filled flexible cylindrical shell: The beam mode. In: Journal of Sound and Vibration, 319 (1-2). 646 -667.

Sarkar, Abhijit and Kunte, MV and Sonti, Venkata R (2011) Unified Dispersion Characteristics of Structural Acoustic Waveguides. In: Computer Modeling in Engineering and Sciences (CMES), 81 (3-4). pp. 249-267.

Sarkar, Abhijit and Sonti, Venkata (2007) An asymptotic approach for the coupled dispersion characteristics of a fluid-filled cylindrical shell. In: 14th International Conference on Sound and Vibration, ICSV14, July 9-12, 2007, Cairns, Australia.

Sarkar, Abhijit and Sonti, Venkata (2007) An asymptotic approach for the coupled dispersion characteristics of a plate loaded with a fluid column. In: ICTACEM 2007, , Dec 27-29, 2007, IIT KGP, India.

Sarkar, Abhijit and Sonti, Venkata R (2007) Asymptotic analysis for the coupled wavenumbers in an infinite fluid-filled flexible cylindrical shell: The axisymmetric mode. In: Computer Modeling in Engineering and Sciences (CMES), 21 (3). pp. 193-207.

Sarkar, Abhijit and Sonti, Venkata R (2009) Simplified dispersion curves for circular cylindrical shells using shallow shell theory. In: Journal Of Sound And Vibration, 322 (1-2). pp. 1-7.

Sarkar, Abhijit and Sonti, Venkata R (2007) An asymptotic analysis for the coupled dispersion characteristics of a structural acoustic waveguide. In: Journal of Sound and Vibration, 306 (3-5). pp. 657-674.

Sarkar, Abhijit and Sonti, Venkata R and Pratap, Rudra (2005) A Coupled FEM-BEM Formulation in Structural Acoustics for Imaging a Material Inclusion. In: International Journal of Acoustics and Vibrations, 10 (1). pp. 3-16.

Sarkar, Biplab and Chakrabarti, Amaresh and Ananthasuresh, GK (2017) Synthesis of feedback-based design concepts for sensors. In: RESEARCH IN ENGINEERING DESIGN, 28 (1). pp. 131-151.

Sarkar, S and Chakraborty, S and Dutta, P (2001) A scaling analysis of momentum and heat transport in laser surface melting. In: Lasers in Engineering, 11 (1). pp. 57-75.

Sarkar, S and Chowdhury, SR and Venugopal, M and Vasu, RM and Roy, D (2014) A Kushner-Stratonovich Monte Carlo filter applied to nonlinear dynamical system identification. In: PHYSICA D-NONLINEAR PHENOMENA, 270 . pp. 46-59.

Sarkar, S and Munshi, J and Pramanik, S and Mukhopadhyay, A and Sen, S (2018) Interaction of water spray with flame. [Book Chapter]

Sarkar, S and Raj, Mohan P and Chakraborty, S and Dutta, P (2002) Three-dimensional computational modeling of momentum, heat, and mass transfer in a laser surface alloying process. In: Numerical Heat Transfer Part A, 42 (3). pp. 307-326.

Sarkar, S and Raj, Mohan P and Chakraborty, S and Phanikumar, G and Chattopadhyay, K and Dutta, P (2003) Transport phenomena in laser surface alloying. In: Journal of Materials Science, 38 (1). pp. 155-164.

Sarkar, Sandip and Ganguly, Suvankar (2017) Characterization of electromagnetohydrodynamic transport of power law fluids in microchannel. In: JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 250 . pp. 18-30.

Sarkar, Sandip and Ganguly, Suvankar (2015) Fully developed thermal transport in combined pressure and electroosmotically driven flow of nanofluid in a microchannel under the effect of a magnetic field. In: MICROFLUIDICS AND NANOFLUIDICS, 18 (4). pp. 623-636.

Sarkar, Sandip and Ganguly, Suvankar and Chakraborty, Suman (2017) Influence of combined electromagnetohydrodynamics on microchannel flow with electrokinetic effect and interfacial slip. In: MICROFLUIDICS AND NANOFLUIDICS, 21 (3).

Sarkar, Sandip and Ganguly, Suvankar and Dalal, Amaresh (2015) Analysis of Entropy Generation During Mixed Convective Heat Transfer of Nanofluids Past a Rotating Circular Cylinder. In: JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 136 (6).

Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Electrokinetically induced thermofluidic transport of power-law fluids under the influence of superimposed magnetic field. In: CHEMICAL ENGINEERING SCIENCE, 171 . pp. 391-403.

Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Magnetohydrodynamic stationary and oscillatory convective stability in a mushy layer during binary alloy solidification. In: APPLIED MATHEMATICAL MODELLING, 48 . pp. 233-249.

Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2016) Thermally developing combined magnetohydrodynamic and electrokinetic transport in narrow confinements with interfacial slip. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 100 . pp. 451-463.

Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Thermofluidic characteristics of combined electroosmotic and pressure driven flows in narrow confinements in presence of spatially non-uniform magnetic field. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 104 . pp. 1325-1340.

Sarojini, Darshan and Lassche, TJ and Herder, JL and Ananthasuresh, GK (2016) Statically balanced compliant two-port bistable mechanism. In: MECHANISM AND MACHINE THEORY, 102 . pp. 1-13.

Sasidharan, S and Dutta, P (2020) Numerical analysis of a hybrid tubular and cavity air receiver for solar thermal applications. In: International Journal of Numerical Methods for Heat and Fluid Flow . (In Press)

Sasidharan, S and Dutta, P (2018) Numerical analysis of pressurized cavity-airreceiver in concentrating solar power system. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 747-751.

Sasidharan, S and Dutta, P (2022) Numerical and experimental studies on a pressurized hybrid tubular and cavity solar air receiver using a Scheffler reflector. In: Applied Thermal Engineering, 214 .

Sasidharan, S and Dutta, P (2021) Optical characterization of a fixed focus Scheffler reflector for pressurized solar receiver testing. In: Solar Energy, 227 . pp. 89-100.

Sasidharan, S and Dutta, P (2022) Studies on thermal energy storage system with ceramic honeycomb channels. In: Journal of Energy Storage, 52 .

Sastry, JS and Munjal, ML (1998) Response of a multi-layered infinite cylinder to a plane wave excitation by means of transfer matrices. In: Journal of sound and vibration, 209 (1). pp. 99-121.

Sastry, JS and Munjal, ML (1998) Response of a multi-layered infinite cylinder to two-dimensional pressure excitation by means of transfer matrices. In: Journal of Sound and Vibration, 209 (1). pp. 123-142.

Sastry, JS and Munjal, ML (1995) A transfer matrix approach for evaluation of the response of a multi-layer infinite plate to a two-dimensional pressure excitation. In: Journal of Sound and Vibration, 182 (1). pp. 109-128.

Sathish, S and Kumar, P (2021) Equation of state based analytical formulation for optimization of sCO2 Brayton cycle. In: Journal of Supercritical Fluids, 177 .

Sathish, S and Kumar, P and Nagarathinam, L and Swami, L and Namburi, AN and Bandarupalli, VS and Gopi, PC (2019) Brayton cycle supercritical CO2 power block for industrial waste heat recovery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Sathish, S and Kumar, P and Nassar, A (2021) Analysis of a 10 MW recompression supercritical carbon dioxide cycle for tropical climatic conditions. In: Applied Thermal Engineering, 186 .

Sathish, Sharath and Kumar, Pramod and Namburi, Adi Narayana and Gopi, Pramod Chandra and Carlson, Matthew D and Ho, Clifford K (2017) OPTIMIZATION OF OPERATING PARAMETERS OF A RECOMPRESSION sCO(2) CYCLE FOR MAXIMUM EFFICIENCY. In: ASME Turbo Expo: Turbine Technical Conference and Exposition, JUN 26-30, 2017, Charlotte, NC.

Sathish, Sharath and Kumar, Pramod and Namburi, Adi Narayana and Gopi, Pramod Chandra and Carlson, Matthew D and Ho, Clifford K (2017) Optimization of Operating Parameters of a Recompression sCO2 Cycle for Maximum Efficiency. In: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017, 26 - 30 June 2017, Charlotte.

Sathyanarayana, Y and Munjal, ML (2000) A Hybrid approach for aeroacoustic analysis of the engine exhaust system. In: Applied Acoustics, 60 (4). pp. 425-450.

Saxena, Saurabh and Sanchez, Gustavo and Pecht, Michael (2017) Batteries in Portable Electronic Devices A User's Perspective. In: IEEE INDUSTRIAL ELECTRONICS MAGAZINE, 11 (2). pp. 35-44.

Sebastian, S and Biswas, SK (1991) Effect of interface friction on the mechanics of indentation of a finite layer resting on a rigid substrate. In: Journal of Physics D: Applied Physics, 24 (7). pp. 1131-1140.

Seetharamu, S and Srinivasan, MN and Mangalgiri, PD (1981) Effect Of Graphite Size And Spacing On The Elastic-Constants Of Spheroidal Graphite Cast-Iron - An Analytical Approach. In: Journal of the Indian Institute of Science, 63 (9). pp. 213-226.

Seivur, S and Rathnakara, SH and Ananthasuresh, GK (2022) Design of a S-shape middle-ear ossicular replacement prosthesis and its comparison with present-day prostheses using finite element modelling. In: Sadhana - Academy Proceedings in Engineering Sciences, 47 (4).

Selvan, Arul K and Biswas, SK (1994) Effect of anisotropy on dislocations at $YBa_2Cu_30_{7-x}-PrBa_2Cu_30_{7-x}$ epitaxial interfaces. In: Superconductor Science & Technology, 7 (11). pp. 805-811.

Selvan, Arul K and Biswas, SK (1994) Flux pinning due to stress concentration introduced by an ellipsoidal precipitate in a stressed $YBa_2Cu_30_7$ film. In: Physica C, 232 (3-4). pp. 233-240.

Selvan, KA and Biswas, SK (1995) Calculation of elastic pinning strength of semicoherent Y2BaCuO5 precipitates in YBa2Cu3O7. In: Philosophical Magazine Letters, 72 (1). pp. 33-39.

Sen, D and Joshi, V (2004) Issues in geometric synthesis of mechanisms. In: Mechanism and Machine Theory, 39 (12). pp. 1321-1330.

Sen, D and Mruthyunjaya, TS (1994) A discrete state perspective of manipulator workspaces Vorstellungen von diskreten zuständen von manipulator-arbeitsräumen. In: Mechanism and Machine Theory, 29 (4). 591 -605.

Sen, Dibakar and Chowdhury, Sanjib and Pandey, Shashank Ram (2004) Geometric design of interference-free planar linkages. In: Mechanism and Machine Theory, 39 (7). pp. 737-759.

Sen, Dibakar and Mruthyunjaya, TS (1998) A CENTRO-BASED CHARACTERIZATION OF SINGULARITIES IN THE WORKSPACE OF PLANAR CLOSED-LOOP MANIPULATORS. In: Mechanism and Machine Theory, 33 (8). pp. 1091-1104.

Sen, Dibakar and Singh, B Nagesh (2008) A geometric approach for determining inner and exterior boundaries of workspaces of planar manipulators. In: Journal of Mechanical Design, 130 (2). 022306.

Sen, Dibakar and Srikanth, TK (2008) Efficient computation of volume fractions for multi-material cell complexes in a grid by slicing. In: Computers & Geosciences, 34 (7). 754 -782.

Sengupta, Amrita and Kumar, Prashant and Garg, Pardeep and Hui, Nirmal and Orosz, Matthew S and Kumar, Pramod (2014) MOMENT ANALYSIS OF A SCROLL EXPANDER USED IN AN ORGANIC RANKINE CYCLE. In: ASME Turbo Expo: Turbine Technical Conference and Exposition, JUN 16-20, 2014, Dusseldorf, GERMANY.

Senve, Vinay and Narasimham, GSVL (2011) Effective thermal conductivity of a heat generating rod bundle dissipating heat by natural convection and radiation. In: Nuclear Engineering and Design, 241 (10). pp. 4331-4340.

Seshadri, L and Giri, G and Setty, R and Sathish, S and Nassar, A and Gopi, PC and Kumar, P and Moroz, L and Namburi, AN (2019) Design of 20 kW turbomachinery for closed loop supercritical carbon dioxide Brayton test loop facility. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.

Seshadri, L and Kumar, P (2024) Sliding Pressure Inventory Control of a Supercritical CO2 Cycle for Concentrated Solar Power-Analysis and Implications. In: Journal of Solar Energy Engineering, Transactions of the ASME, 146 (1). pp. 1-25.

Seshadri, L and Kumar, P (2024) VANELESS DIFFUSER MODELLING FOR REAL GAS SUPERCRITICAL CARBON DIOXIDE FLOWS- NEED FOR A DATA DRIVEN APPROACH. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 24 June 2024through 28 June 2024, London.

Seshadri, L and Patel, A and Biradar, V and Kumar, P and Gopi, PC (2022) Two Stage Radial Compressor for a Kilowatt Scale Supercritical Carbon Dioxide Power Block: Design Considerations. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.

Seshadri, L and Raja, HN and Kumar, P and Nassar, A and Giri, G and Moroz, L (2019) Supercritical carbon dioxide turbomachinery options for kilowatt to gigawatt level power generation. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.

Seshadri, Lakshminarayanan and Kumar, Pramod and Nassar, Abdul and Giri, Gaurav (2022) Analysis of Turbomachinery Losses in S-CO2 Brayton Power Blocks. In: UNSPECIFIED.

Seshan, S and Kaneko, Junichi (1992) Advanced Materials Through Mechanical Alloying: A Retrospective Review. In: Advanced Composite Materials, 2 (2). pp. 153-170.

Seshan, S and Srivatsan, TS (1990) Casting Aluminium-Lithium Alloys in Open Atmosphere. In: Materials and Manufacturing Processes, 5 (1). 109 - 119.

Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.

Seshan, S and Vijayalakshmi, D (1986) Heat pipes-concepts, materials and applications. In: Energy Conversion and Management, 26 (1). 1 -9.

Shah, MM and Srinivasan, MN and Seshadri, MR (1980) On standardization of slurry for investment shells using indigenous materials. In: Transactions of the Indian Institute of Metals, 33 (4). pp. 306-310.

Shaija, A and Narasimham, GSVL (2009) Effect of surface radiation on conjugate natural convection in a horizontal annulus driven by inner heat generating solid cylinder. In: International Journal of Heat and Mass Transfer, 52 (25-26). pp. 5759-5769.

Shaikeea, Angkur and Basu, Saptarshi and Hatte, Sandeep and Bansal, Lalit (2016) Insights into Vapor-Mediated Interactions in a Nanocolloidal Droplet System: Evaporation Dynamics and Affects on Self-Assembly Topologies on Macro- to Microscales. In: LANGMUIR, 32 (40). pp. 10334-10343.

Shaikeea, Angkur Jyoti Dipanka and Basu, Saptarshi (2016) Evaporating sessile droplet pair: Insights into contact line motion, flow transitions and emergence of universal vaporisation pattern. In: APPLIED PHYSICS LETTERS, 108 (24).

Shaikeea, Angkur Jyoti Dipanka and Basu, Saptarshi (2016) Insight into the Evaporation Dynamics of a Pair of Sessile Droplets on a Hydrophobic Substrate. In: LANGMUIR, 32 (5). pp. 1309-1318.

Shaikeea, Angkur Jyoti Dipanka and Basu, Saptarshi (2016) Insight into the Evaporation Dynamics of a Pair of Sessile Droplets on a Hydrophobic Substrate. In: LANGMUIR, 32 (5). pp. 1309-1318.

Shaikeea, Angkur Jyoti Dipanka and Basu, Saptarshi and Bansal, Lalit (2018) Sessile nanofluid droplet can act like a crane. In: JOURNAL OF COLLOID AND INTERFACE SCIENCE, 512 . pp. 497-510.

Shaikeea, Angkur Jyoti Dipanka and Basu, Saptarshi and Tyagi, Abhishek and Sharma, Saksham and Hans, Rishabh and Bansal, Lalit (2017) Universal representations of evaporation modes in sessile droplets. In: PLOS ONE, 12 (9).

Shaikh, A and Panwar, S and Tsuruta, R and Gandhi, U (2022) Effect of Coating on the Continuous Cycle Actuation of Shape Memory Alloy Wires: Analyses and Experiments. In: Proceedings of ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2022, 12 - 14 September 2022, Dearborn.

Shamasundar, S and Marathe, AG and Biswas, SK (1991) Effect of process variables on die-billet temperature history in a slow speed hot coining type process. In: Journal of Engineering for Industry-Transactions of the ASME, 113 (4). pp. 362-372.

Shamasundar, S and Tseng, AA and Aung, W and Biswas, SK (1993) Numerical and experimental study of the thermal behaviour of coining and upsetting processes. In: Journal of Materials Processing Technology, 36 (2). pp. 199-221.

Shampur, M and Padinjarenmattathil, U and Desai, A and Narayanaswamy, J (2010) Development and immunogenicity of a novel polyetherimine (PETIM) dendrimer based nanoformulated DNA rabies vaccine. In: International Journal of Infectious Diseases (IJID), 14 (Suppl.). E453.

Shamsundar, S and Marathe, AG and Biswas, SK (1984) Development of a computer code to predict cooling of die and billet in forging. In: International Journal of Machine Tool Design and Research, 24 (4). pp. 311-320.

Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.

Sharma, A and Dev, N and Dash, S (2022) Capillary-fed evaporative microthruster for nano /microsatellites. In: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022, 3-7 Jan 2022, San Diego.

Sharma, A and Dev, N and Dash, S (2022) Capillary-fed evaporative microthruster for nano /microsatellites. In: AIAA Science and Technology Forum and Exposition, 3-7 Jan 2022, San Diego.

Sharma, A and Kumar, P and Ambirajan, A (2022) Scaling Radiation in Planar Participating Anisotropically Scattering Gray Media Under Radiative Equilibrium. In: Journal of Thermophysics and Heat Transfer, 36 (1). pp. 226-232.

Sharma, A and Shukla, RK (2024) Guest Editorial: Multi-Fluid and Fluid�Structure Interactions in Biological Systems: Computational Methods and Applications. In: Journal of the Indian Institute of Science .

Sharma, Akriti and Rangarajan, Ramsharan (2019) A shape optimization approach for simulating contact of elastic membranes with rigid obstacles. In: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 117 (4). pp. 371-404.

Sharma, CL and Soundranayagam, S and Somkrishan, * and Mukund, TS (1998) Dependence of vortex breakdown on angular momentum parameter in draft tube flows. In: Current Science, 75 (12). pp. 1355-1363.

Sharma, GK and Gurumoorthy, B (2020) Iso-material contour representation for process planning of heterogeneous object model. In: Journal of Computational Design and Engineering, 7 (4). pp. 498-513.

Sharma, GK and Gurumoorthy, B (2019) Modelling multiply connected heterogeneous objects using mixed-dimensional material reference features. In: Journal of Computational Design and Engineering, 6 (3). pp. 337-347.

Sharma, NC and Manohar, S (1992) Line clipping revisited: Two efficient algorithms based on simple geometric observations. In: Computers & Graphics, 16 (1). pp. 51-54.

Sharma, Pooja (2018) Heteroatomic jet fuel components: Lichen substances as fuel component and potential additives. In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 256 .

Sharma, Pooja and Bhattacharya, Atmadeep and Basu, Saptarshi (2019) Formation of hollow and solid carbon spheres in thermally stressed jet fuel in the low temperature autoxidation regime. In: CHEMICAL ENGINEERING SCIENCE, 206 . pp. 335-347.

Sharma, Pradeep and Narasimhan, R and Mishra, RK (2008) Finite Element Analysis of Mode I Crack Tip Fields in Polycrystalline Plastic Solids. In: Proc. of Interquadrennial Conference of International Congress on Fracture (IQCICF08), IISc Bangalore, India, Aug. 2008, IISc Bangalore.

Sharma, S and Chandra, NK and Basu, S and Kumar, A (2022) Advances in droplet aerobreakup. In: European Physical Journal: Special Topics .

Sharma, S and Chandra, NK and Kumar, A and Basu, S (2023) Shock-induced atomisation of a liquid metal droplet. In: Journal of Fluid Mechanics, 972 .

Sharma, S and Jain, S and Saha, A and Basu, S (2022) Evaporation dynamics of a surrogate respiratory droplet in a vortical environment. In: Journal of Colloid and Interface Science, 623 . pp. 541-551.

Sharma, S and Pinto, R and Saha, A and Chaudhuri, S and Basu, S (2021) On secondary atomization and blockage of surrogate cough droplets in single- And multilayer face masks. In: Science Advances, 7 (10).

Sharma, S and Pratap Singh, A and Srinivas Rao, S and Kumar, A and Basu, S (2021) Shock induced aerobreakup of a droplet. In: Journal of Fluid Mechanics, 929 .

Sharma, S and Rao, SJ and Chandra, NK and Kumar, A and Basu, S and Tropea, C (2023) Depth from defocus technique applied to unsteady shock-drop secondary atomization. In: Experiments in Fluids, 64 (4).

Sharma, S and Singh, AP and Basu, S (2021) On the dynamics of vortex-droplet co-axial interaction: Insights into droplet and vortex dynamics. In: Journal of Fluid Mechanics, 918 .

Sharma, SD (1987) Development of pseudo-two-dimensional turbulent wakes. In: Physics of Fluids, 30 (2). pp. 357-363.

Sharma, SD and Mani, K and Arakeri, VH (1990) Cavitation noise studies on marine propellers. In: Journal of Sound and Vibration, 138 (2). pp. 255-283.

Sharma, V and Gupta, RK and Kailas, SV and Basu, B (2022) Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite. In: Journal of Biomaterials Applications .

Shashikant, Pawar and Jaywant, Arakeri (2012) High Rayleigh number convection in a long vertical tube. In: ICTAM(2012), 19 to 24 August, 2012, Beijing, China.

Shastry, MCR and Udgaonkar, Jayant B (1995) The Folding Mechanism of Barstar: Evidence for Multiple Pathways and Multiple Intermediates. In: Journal of Molecular Biology, 247 (5). pp. 1013-1027.

Shekhar, S and Vinoy, KJ and Ananthasuresh, GK (2009) Analysis of Transient Behaviour of Electrostatically Actuated Micromachined Switches. In: Proc. of the 3rd National ISSS Conference on MEMS, Smart Structures and Materials, Oct. 14-16, 2009, Kolkatta.

Shekhar, S and Vinoy , KJ and Ananthasuresh, GK (2011) Switching and Release Time Analysis of Electrostatically Actuated Capacitive RF MEMS Switches. In: IFSA, 130 (7). pp. 77-90.

Shekhar, Sudhanshu and Vinoy, KJ and Ananthasuresh, GK (2018) Low-voltage high-reliability MEMS switch for millimeter wave 5G applications. In: JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 28 (7).

Shekhar, Sudhanshu and Vinoy, KJ and Ananthasuresh, GK (2017) Surface-Micromachined Capacitive RF Switches With Low Actuation Voltage and Steady Contact. In: Journal of Microelectromechanical Systems, 26 (3). pp. 643-652. ISSN 1057-7157

Shete, Mayuresh K and Dutta, Tanmay and Singh, I and Narasimhan, R and Ramamurty, U (2017) Tensile stress-strain response of metallic glass matrix composites reinforced with crystalline dendrites: Role of dendrite morphology. In: INTERMETALLICS, 83 . pp. 70-82.

Shete, Mayuresh K and Singh, I and Narasimhan, R and Ramamurty, U (2016) Effect of strain hardening and volume fraction of crystalline phase on strength and ductility of bulk metallic glass composites. In: SCRIPTA MATERIALIA, 124 . pp. 51-55.

Shetty, R and Balakrishnan, N and Shroff, S and Shetty, N and Kabi, PJ and Roy, D and Joseph, SM and Khamar, P and Basu, S and Roy, AS (2020) Quantitative high-speed assessment of droplet and aerosol from an eye after impact with an air-puff amid COVID-19 Scenario. In: Journal of Glaucoma . (In Press)

Shetty, Suhan and Ghosal, Ashitava (2019) Trajectory Tracking and Control of Car-Like Robots. In: UNSPECIFIED, DEC 13-15, 2017, Mumbai, INDIA, pp. 759-767.

Shikha, K and Sriram Bharath, G and Mukhopadhyay, S and Chakraborty, M and Ghosh, S and Khatun, S and De, D and Gupta, AN and Ganguly, A (2021) The catalytic core of Leishmania donovani RECQ helicase unwinds a wide spectrum of DNA substrates and is stimulated by replication protein A. In: FEBS Journal .

Shinde, Sachin Y and Arakeri, Jaywant H (2014) Flexibility in flapping foil suppresses meandering of induced jet in absence of free stream. In: JOURNAL OF FLUID MECHANICS, 757 . pp. 231-250.

Shinde, Sachin Y and Arakeri, Jaywant H (2013) Jet meandering by a foil pitching in quiescent fluid. In: Physics of Fluids, 25 (4). 041701_1-041701_8.

Shinde, Sachin Y and Arakeri, Jaywant H (2018) Physics of unsteady thrust and flow generation by a flexible surface flapping in the absence of a free stream. In: PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 474 (2218).

Shri Kant, * and Munjal, ML and Rao, DL Prasanna (1974) Waves in branched hydraulic pipes. In: Journal of Sound and Vibration, 37 (4). pp. 507-519.

Shrikanth, V and Archana, S and Bobji, MS (2019) A new method to study evaporation of sessile drop from permeable surfaces. In: MEASUREMENT SCIENCE AND TECHNOLOGY, 30 (7).

Shrikanth, V and Bobji, MS (2014) A non-resonant mass sensor to eliminate the ``missing mass'' effect during mass measurement of biological materials. In: REVIEW OF SCIENTIFIC INSTRUMENTS, 85 (10).

Shrikanth, V and Simha, KRY and Bobji, MS (2015) Frictional force measurement during stick-slip motion of a piezoelectric walker. In: IEEE International Conference on Industrial Technology (ICIT), MAR 17-19, 2015, Seville, SPAIN, pp. 1463-1468.

Shrinivasa, U and Mukunda, HS (1984) Wood gas generators for small power $(\sim 5hp)$ requirements. In: Sadhana, 7 (2). pp. 137-154.

Shrivastava, A and Supreeth, M and Gundiah, N (2023) Crack propagation and arrests in gelatin hydrogels are linked to tip curvatures. In: Soft Matter, 19 (36). pp. 6911-6919.

Shukla, Ratnesh K (2014) Nonlinear preconditioning for efficient and accurate interface capturing in simulation of multicomponent compressible flows. In: JOURNAL OF COMPUTATIONAL PHYSICS, 276 . pp. 508-540.

Shukla, Ratnesh K (2015) Numerical investigation of shock-induced bubble collapse near a rigid wall. In: IUTAM Symposium on Multiphase Flows with Phase Change Challenges and Opportunities, DEC 08-11, 2014, Indian Inst Technol, Hyderabad, INDIA, pp. 158-164.

Shukla, Ratnesh K (2012) Simulation of multiphase compressible flows with an interface capturing method. In: 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012), 19 to 24 August, 2012, Beijing, China.

Shukla, Ratnesh K and Arakeri, Jaywant H (2013) Minimum power consumption for drag reduction on a circular cylinder by tangential surface motion. In: JOURNAL OF FLUID MECHANICS, 715 . pp. 597-641.

Shukla, Ratnesh K and Giri, Pritam (2014) Isotropic finite volume discretization. In: JOURNAL OF COMPUTATIONAL PHYSICS, 276 . pp. 252-290.

Shukla, Ratnesh K and Pathak, Harshavardhana S (2017) A Finite Volume Moving Mesh Method for the Simulation of Compressible Flows. In: 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, DEC 12-14, 2014, Indian Inst Technol Kanpur, Kanpur, INDIA, pp. 279-287.

Shukla, S and Govardhan, RN and Arakeri, JH (2013) Dynamics of a flexible splitter plate in the wake of a circular cylinder. In: Journal of Fluids and Structures, 41 . pp. 127-134.

Shukla, S and Govardhan, RN and Arakeri, JH (2007) Flow over a bluff body with a flexible splitter plate. In: Fifth Conf. on Bluff Body Wakes and Vortex-Induced Vibrations (BBVIV5) Costa do Sauipe, , 12–15 December 2007, Brazil.

Shukla, S and Govardhan, RN and Arakeri, JH (2011) Flow over a bluff body with flexible splitter plates: Plate dynamics, wake velocity fields and forces. In: UNSPECIFIED, pp. 133-136.

Shukla, S and Govardhan, RN and Arakeri, JH (2009) Flow over a cylinder with a hinged-splitter plate. In: Conference on Bluff Body Wakes and Vortex-Induced Vibrations, DEC 12-15, Brazil, pp. 713-720.

Shyam, Ashith R B and Ghosal, A (2017) Path planning of a 3-UPU wrist manipulator for sun tracking in central receiver tower systems. In: MECHANISM AND MACHINE THEORY, 119 . pp. 130-141.

Shyam, Ashith RB and Ghosal, A (2015) Three-degree-of-freedom Parallel Manipulator to Track the Sun for Concentrated Solar Power Systems. In: CHINESE JOURNAL OF MECHANICAL ENGINEERING, 28 (4). pp. 793-800.

Shyam, RB Ashith and Acharya, Mohit and Ghosal, A (2017) A heliostat based on a three degree-of-freedom parallel manipulator. In: SOLAR ENERGY, 157 . pp. 672-686.

Shyamsundar, N and Gurumoorthy, B (1996) Construction of solid model from measured point data. In: 1996 IEEE International Conference on Robotics and Automation, APR 22-28, 1996, MINNEAPOLIS.

Siddesh, SS and Harisankar, R and Ananthasuresh, GK (2022) Surface Profile Accuracy of Deployable Mesh Reflectors Based on Focal Offset. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 - 7 December 2019, Mandi, pp. 1355-1365.

Simha, K (2022) Decoding lizard tail autotomy: Autonomous or actuated? In: Journal of Biosciences, 47 (2).

Simha, KRY (2021) Earthyroid Storms: Brewing Cyclones, Megaquakes and Tsunamis? In: Journal of the Geological Society of India, 97 (2). p. 214.

Simha, KRY (1996) Effect of open joint on stress wave propagation. In: 5th International Symposium on Rock Fragmentation by Blasting (FRAGBLAST-5), AUG 25-29, 1996, MONTREAL, CANADA,.

Simha, KRY and Jain, Rajeev and Ramachandra, K (1994) Variable density approach for rotating shallow shell of variable thickness. In: International Journal of Solids and Structures, 31 (6). pp. 849-863.

Simha, KRY and Mohapatra, SS (1998) Stress concentration around irregular holes using complex variable method. In: Sadhana, 23 (4). pp. 393-412.

Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.

Simha, KRY and Hande, HSS and Arora, PR (1993) Monitoring Fatigue Crack Propagation in Compact Tension Specimens via Remote Sensing of Back Face Strain. In: Journal of Testing and Evaluation, 21 (1). pp. 3-8.

Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.

Singh, A and Dhami, HS and Sinha, MK and Kumar, R (2022) Evaluation and comparison of mineralogical, micromeritics and rheological properties of waste machining chips, coal fly ash particulates with metal and ceramic powders. In: Powder Technology, 408 .

Singh, A and Dhami, HS and Sinha, MK and Sharma, RK and Gupta, MK and Korkmaz, ME and Tailor, S and Singh, J and Kumar, R (2024) Modeling, deposition, and mechanical characterizations of single-step surface coating using high-speed grinding. In: International Journal of Advanced Manufacturing Technology .

Singh, A and Singh, J and Dhami, HS and Sinha, MK and Viswanathan, K and Kumar, R (2022) Quantifying the influences of coal fly ash on rheological and compaction behaviour of iron powder and mild steel machining chips. In: Advanced Powder Technology, 33 (11).

Singh, Aravind R and Narasimham, GSVL and Biswas, SK (2002) Estimation of surface temperature of a pin wearing on a disk. In: Tribology Letters, 12 (4). pp. 203-207.

Singh, Archana and Gandra, Ravi T and Schneider, Eric W and Biswas, Sanjay K (2011) Lubricant Degradation and Related Wear of a Steel Pin in Lubricated Sliding Against a Steel Disc. In: ACS Applied Materials & Interfaces, 3 (7). pp. 2512-2521.

Singh, Archana and Gandra, Ravi T and Schneider, Eric W and Biswas, Sanjay K (2013) Studies on the Aging Characteristics of Base Oil with Amine Based Antioxidant in Steel-on-Steel Lubricated Sliding. In: JOURNAL OF PHYSICAL CHEMISTRY C, 117 (4). pp. 1735-1747.

Singh, Arvind R and Biswas, SK and Kailas, Satish V (1999) Sliding wear of cadmium against alumina. In: Wear, 225-22 (2). pp. 770-776.

Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.

Singh, Bhagwant and Tirunarayanan, MA (1980) Dynamic viscosity of ternary mixtures of dichlorodifluoromethane (R-12), chlorodifluoromethane (R-22), and dichlorotetrafluoroethane (R-114) vapors. In: Journal of Chemical & Engineering Data, 25 (1). pp. 57-59.

Singh, I and Guo, TF and Murali, P and Narasimhan, R and Zhang, YW and Gao, HJ (2013) Cavitation in materials with distributed weak zones: Implications on the origin of brittle fracture in metallic glasses. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61 (4). pp. 1047-1064.

Singh, I and Guo, TF and Narasimhan, R and Zhang, YW (2014) Cavitation in brittle metallic glasses - Effects of stress state and distributed weak zones. In: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (25-26). pp. 4373-4385.

Singh, I and Narasimhan, R (2016) Notch sensitivity in nanoscale metallic glass specimens: Insights from continuum simulations. In: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 86 . pp. 53-69.

Singh, I and Narasimhan, R and Ramamurty, Upadrasta (2016) Cavitation-Induced Fracture Causes Nanocorrugations in Brittle Metallic Glasses. In: PHYSICAL REVIEW LETTERS, 117 (4).

Singh, I and Narasimhan, R and Zhang, YW (2014) Ductility enhancement in nanoglass: role of interaction stress between flow defects. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (11). pp. 678-687.

Singh, M and Tripathi, P and Ramkumar, J (2022) Electrical discharge micro-texturing using compound tool electrodes for tribological and wettability applications. In: Surface Engineering .

Singh, MK and Tiku, H and Bobji, MS (2022) Study of Contact Line Parameters of Evaporating Sessile Drops from Various Substrates. In: Silicon .

Singh, Manoj K and Yadav, Darvik and Arpit, Sankalp and Mitra, Sourav and Saha, Sandip K (2016) Effect of nanofluid concentration and composition on laminar jet impinged cooling of heated steel plate. In: APPLIED THERMAL ENGINEERING, 100 . pp. 237-246.

Singh, Neera and Edachery, Vimal and Rajput, Monika and Chatterjee, Kaushik and Kailas, Satish V and Prashanth, KG (2022) Ti6Al7Nb–TiB nanocomposites for ortho-implant applications. In: Journal of Materials Research . ISSN 0884-2914

Singh, P Bhagat and Sabat, R K and Kumaran, S and Suwas, S (2018) Effect of Aluminum Addition on the Evolution of Microstructure, Crystallographic Texture and Mechanical Properties of Single Phase Hexagonal Close Packed Mg-Li Alloys. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (2). pp. 864-874.

Singh, PP and Singh, AK and Nigam, S and Singh, MK (2023) Mechanical Energy Harvesting Scheme, Implementation Aspects, and Applications. [Book Chapter]

Singh, Puneet and Ananthasuresh, GK (2013) A Compact and Compliant External Pipe-Crawling Robot. In: IEEE TRANSACTIONS ON ROBOTICS, 29 (1). pp. 251-260.

Singh, Puneet and Jana, Sumitash and Ghosal, Ashitava and Murthy, Aditya (2016) Exploration of joint redundancy but not task space variability facilitates supervised motor learning. In: PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 113 (50). pp. 14414-14419.

Singh, Puneet and Lenka, Abhishek and Stezin, Albert and Jhunjhunwala, Ketan and Pal, Pramod Kumar and Ghosal, Ashitava and Murthy, Aditya (2019) Basal ganglia contributions during the learning of a visuomotor rotation: Effect of dopamine, deep brain stimulation and reinforcement. In: EUROPEAN JOURNAL OF NEUROSCIENCE .

Singh, R and Keshavan, J (2024) Approximation-Free Robust Tracking Control of Unknown Redundant Manipulators with Prescribed Performance and Input Constraints. In: IEEE Transactions on Systems, Man, and Cybernetics: Systems, 54 (11). pp. 6743-6755.

Singh, R and Keshavan, J (2022) A Provably Constrained Neural Control Architecture with Prescribed Performance for Fault-Tolerant Redundant Manipulators. In: IEEE Access, 10 . pp. 97719-97732.

Singh, Raghvendra P and Jog, Chandrashekhar (2016) A hybrid finite element formulation for flexible multibody dynamics. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 230 (1). pp. 3-28.

Singh, S and Garg, VK and Ramamurthy, PC and Singh, J and Pandey, A (2023) Impact and prospects of pesticides on human and environmental health. [Book Chapter]

Singh, S and Kandasami, RK and Murthy, TG and Coop, MR (2023) On the modelling of stress-dilatancy behavior in weakly cemented sands. In: Soils and Foundations, 63 (4).

Singh, S and Singh, S and Patel, A and Srivastav, SK (2019) Investigation of thermoelectric properties of LaFe0.1Co0.9O3 compound. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.

Singh, SK and Chattopadhyay, K and Dutta, P (2020) Determination of Optimum Process Parameters and Residual Stress in Friction Welding of Thixocast A356 Aluminum Alloy. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .

Singh, Satwinder Jit and Chatterjee, Anindya (2010) Beyond fractional derivatives: local approximation of other convolution integrals. In: Proceedings of the royal society a-mathematical physical and engineering sciences, 466 (2114). pp. 563-581.

Singh, Satwinder Jit and Chatterjee, Anindya (2007) Fractional damping: Stochastic origin and finite approximations. In: 2nd Symposium on Fractional Derivatives and Their Applications (FDTAs, SEP, 2005, Long Beach, CA.

Singh, Satwinder Jit and Chatterjee, Anindya (2006) Galerkin Projections and Finite Elements for Fractional Order Derivatives. In: Nonlinear Dynamics, 45 (1-2). pp. 183-206.

Singh, Satwinder Jit and Chatterjee, Anindya (2004) Nonintrusive Measurement of Contact Forces During Vibration Dominated Impacts. In: Journal Of Dynamic Systems Measurement And Control-transactions Of The, 126 (3). pp. 489-497.

Singh, Satwinder Jit and Chatterjee, Anindya (2011) Unified Galerkin- and DAE-Based Approximation of Fractional Order Systems. In: Journal of Computational and Nonlinear Dynamics, 6 (2).

Singh, Shailesh K and Chattopadhyay, K and Phanikumar, G and Dutta, P (2014) Experimental and numerical studies on friction welding of thixocast A356 aluminum alloy. In: ACTA MATERIALIA, 73 . pp. 177-185.

Singh, Shailesh Kumar and Chattopadhyay, K and Dutta, Pradip (2015) High-Temperature Workability of Thixocast A356 Aluminum Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 3248-3259.

Singh, T and Kumar, N and Ashok Raj, J and Grewal, JS and Patnaik, A and Fekete, G (2019) Natural fiber reinforced non-asbestos brake friction composites: Influence of ramie fiber on physico-mechanical and tribological properties. In: Materials Research Express, 6 (11).

Singh, U and Trikha, M and Ghosal, A (2021) Dynamic Analysis of a Legged Lander System. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019 - 20 December 2019, Bengaluru, pp. 449-458.

Singh, U and Trikha, M and Simha, KRY and Ghosal, A (2024) Experimental, numerical, and theoretical analysis of tapered belleville spring. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science .

Singh, VK and Likhar, PV and Simha, KRY and Kandan, AM and Prasad, KS and Krishna, PH and Kailas, SV (2024) Lateral force controlled impact tr