ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Partitioning design space for linear tuning of natural frequencies in planar dynamic MEMS structures

Kumar, Shishir and Pratap, Rudra (2006) Partitioning design space for linear tuning of natural frequencies in planar dynamic MEMS structures. In: Sensors and Actuators, A: Physical, 125 (2). pp. 304-312.

[img] PDF
Restricted to Registered users only

Download (395kB) | Request a copy


One of the critical design considerations in dynamic microelectromechanical systems (MEMS) devices is the structural natural frequency of the sensing or actuation element. Most dynamic MEMS devices employ planar geometry using an assembly of beams and plates for the structural elements. Most often the goal is to place the first resonant frequency at a desired value. Since the frequency depends on mass and stiffness of the structure, designing for frequency usually requires FEM analysis of the structure. FEM calculations are intensive, depend on many subtle modeling assumptions, and require huge number of simulations to build intuition. Since the design space for such structures is fairly high dimensional, tuning the frequency of the first-cut design can be a fairly intensive optimization computation. Here, we present a lumped parameter spring-mass model for a typical microstructure consisting of a plate and beams and show how the higher dimensional geometric design space can be partitioned to effect desired frequency changes in the structure linearly with the chosen design variables. In particular, four sets of design variables are considered and their effective range and sensitivity for linear tuning of the natural frequency is presented. We include the effect of residual stress on stiffness and show how the values of residual stress affect the tuning of the natural frequency with respect to the selected design variables. All results are compared with FEM calculations and a table is presented for cross comparison of efficacy of the different design variables. The goal is to present a simple analysis that can be easily followed by MEMS designers with any background and build their intuition for such designs.

Item Type: Journal Article
Publication: Sensors and Actuators, A: Physical
Publisher: Elsevier BV
Additional Information: The Copyright belongs to Elsevier BV.
Keywords: Dynamic MEMS structures;Beams and plates;Natural frequency;Design space;Discrete model;Frequency tuning;Residual stress
Department/Centre: Division of Mechanical Sciences > Mechanical Engineering
Date Deposited: 20 Jan 2006
Last Modified: 19 Sep 2010 04:22
URI: http://eprints.iisc.ac.in/id/eprint/5098

Actions (login required)

View Item View Item