|
 | Up a level |
Acharya, S and Bhatt, AN and Chakrabarti, A (2023) PROBLEM BASED LEARNING THROUGH DESIGN THINKING TO STRENGTHEN EDUCATION IN SOUTH ASIA. In: 25th International Conference on Engineering and Product Design Education, E and PDE 2023, 7 September 2023through 8 September 2023, Barcelona, pp. 505-510.
Acharya, S and Bhatt, AN and Chakrabarti, A and Delhi, VSK and Diehl, JC and Mota, N and Jurelionis, A and Subra, R (2021) Design Thinking as a Strategy to Inculcate Problem-Based Learning (PBL) in Undergraduate Education Across South Asian Universities. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, pp. 547-559.
Acharya, S and Bhatt, AN and Chakrabarti, A and Delhi, VSK and Diehl, JC and van Andel, E and Jurelionis, A and Stasiuliene, L and De Jussilainen Costa, L and Subra, R (2021) Problem-Based Learning (PBL) in Undergraduate Education: Design Thinking to Redesign Courses. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, pp. 349-360.
Acharya, S and Chakrabarti, A (2019) ‘ConcepTe’: Supporting Environmentally Benign Design Decision-Making at Conceptual Stage. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 335-344.
Acharya, S and Chakrabarti, A (2020) A conceptual tool for environmentally benign design: Development and evaluation of a proof of concept. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 34 (1). pp. 30-44.
Acharya, S and Ghadge, K and Ranjan, BSC and Devadula, S and Chakrabarti, A (2020) Evaluating the effectiveness of InDeaTe tool in supporting design for sustainability. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 34 (1). pp. 45-54.
Acharya, Shakuntala and Chakrabarti, Amaresh (2015) SUPPORTING ENVIRONMENTALLY-BENIGN DESIGN ELUCIDATING ENVIRONMENTAL IMPACT PROPAGATION IN CONCEPTUAL DESIGN PHASE BY SAPPHIRE MODEL OF CAUSALITY. In: 20th International Conference on Engineering Design (ICED), JUL 27-31, 2015, Milan, ITALY.
Acharya, Shakuntala and Chakrabarti, Amaresh (2018) Supporting Environmentally-Benign Design: Environmental Impact Estimation and Uncertainty Categories with Respect to Life Cycle Assessment in Conceptual Design. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 3-18.
Acharya, Shakuntala and Ghadge, Kiran and Langfitt, Quinn Michael and Pezeshki, Charles and Ameta, Gaurav and Rachuri, Sudarsan and Chakrabarti, Amaresh (2017) Supporting Sustainable Product Design: A Case Study with InDeaTe Tool and Template at Washington State University, Pullman, WA. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 209-224.
Acharya, Shakuntala and Ghadge, Kiran and Uchil, Praveen and Flynn, Carli Denyse and Johnson, Alexander James and Squier, Mallory Nicole and Yang, Yige and Yang, Xiaoliang and Davidson, Cliff Ian and Ameta, Gaurav and Rachuri, Sudarsan and Chakrabarti, Amaresh (2017) Supporting Sustainable Service-System Design: A Case Study on Green-Roof Design with InDeaTe Template and Tool at Syracuse, New York. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 19-33.
Adhikari, D and Gururaja, S and Hemchandra, S and KoÄ�Ã, J (2022) Resin infusion in porous preform in the presence of HPM considering complex geometry and gravity: Flow simulation and experimental validation. In: Journal of Reinforced Plastics and Composites .
Agarwal, A and JeevithaShree, D and Saluja, KS and Sahay, A and Mounika, P and Sahu, A and Bhaumik, R and Rajendran, VK and Biswas, P (2019) Comparing two webcam-based eye gaze trackers for users with severe speech and motor impairment. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 641-652.
Agrawal, A and Fischer, M and Singh, V (2022) Digital Twin: From Concept to Practice. In: Journal of Management in Engineering, 38 (3).
Agrawal, A and Singh, V and Fischer, M (2023) LeanAI: A method for AEC practitioners to effectively plan AI implementations. In: 40th International Symposium on Automation and Robotics in Construction, 5-7 July 2023, Chennai, pp. 653-660.
Agrawal, A and Thiel, R and Jain, P and Singh, V and Fischer, M (2023) Digital Twin: Where do humans fit in? In: Automation in Construction, 148 .
Agrawal, Ashwin and Singh, Vishal and Thiel, Robert and Pillsbury, Michael and Knoll, Harrison and Puckett, Jay and Fischer, Martin (2022) Digital Twin in Practice: Emergent Insights from an Ethnographic-Action Research Study. In: Construction Research Congress 2022: Computer Applications, Automation, and Data Analytics, CRC 2022, 9-12 March 2022, Arlington, pp. 1253-1260.
Agyei Boakye, AA and Boguski, T and Cashman, S and Koffler, C and Kreuder, A and Kumar, M and Vipparla, NK and Peterson, L (2023) At the intersection of life cycle assessment and indirect greenhouse gas emissions accounting. In: International Journal of Life Cycle Assessment .
Ahmed, S Saleem and Gurumoorthy, B (2017) Form and Colour-Two Basic Elements of Design. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 893-902.
Aiswarya, L and Chowdhury, AR (2021) Human aware robot motion planning using RRT algorithm in industry4.0 environment. In: 2nd IEEE International Conference on Intelligence and Safety for Robotics, ISR 2021, 4-6 Mar 2021, virtual, Nagoya, pp. 351-358.
Alagundagi, Sourabh Suresh and Pasala, Krupakar and Arora, Manish (2018) Opto-Electronic System for Intravenous Infusion Monitoring. In: 10th International Conference on Communication Systems and Networks (COMSNETS), JAN 03-07, 2018, Bangalore, INDIA, pp. 688-692.
Alekya, B and Sitaramgupta, VVSN and Arjun, BS and Pandya, HJ (2022) Sensor for Meso-Scale Tissue Stiffness Characterization. In: IEEE Sensors Journal, 22 (7). pp. 6442-6453.
Amrutha, B and Arora, Manish (2018) Comparison of Envelope Detection and Signal Normalization Methods for Foetal Heart Rate Extraction from Foetal Heart Sound. In: Fourth International Conference on Biosignals, Images and Instrumentation (ICBSII), Chennai, India, 2018, 22-24 March 2018, Chennai, India.
Amrutha, B and Sinha, Raveesh and Kumar, Sidhesh and Arora, Manish (2019) Foetal Acoustic Simulator. In: 11th International Conference on Communication Systems & Networks (COMSNETS) 2019, 7-11 Jan. 2019, Bengaluru, Karnataka, India, pp. 882-885.
Arackal, MN and Devadula, S and Kumar, T (2024) iSukoon: An App to Manage Social Anxiety in Designers. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 325-334.
Arjun, S (2018) Personalizing data visualization and interaction. In: 26th ACM InternatiConference on User Modeling, Adaptation and Personalization, UMAP 2018, 8 - 11 July 2018, Singapore, pp. 199-202.
Arjun, S and Kothari, B and Shah, NK and Biswas, P (2022) Do weak readers in rural India automatically read same language subtitles on Bollywood films? An eye gaze analysis. In: Journal of Eye Movement Research, 15 (5).
Arjun, S and Reddy, GSR and Mukhopadhyay, A and Vinod, S and Biswas, P (2021) Evaluating Visual Variables in a Virtual Reality Environment. In: 34th British Human Computer Interaction Conference Interaction Conference, 19-21 Jul 2021, Virtual, Online, pp. 133-138.
Arjun, S and Saluja, KP and Biswas, P (2021) Analyzing Ocular Parameters for Web Browsing and Graph Visualization. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, Virtual, pp. 327-337.
Ashok, Shanthanu S and Kumar, Tarun and Bhalla, Kriti (2018) Integrated Greywater Management Systems: A Design Proposal for Efficient and Decentralised Greywater Sewage Treatment. In: 25th CIRP Life Cycle Engineering (LCE) Conference, APR 30-MAY 02, 2018, Copenhagen, DENMARK, pp. 609-614.
Ashraf, I and Kumar, T (2024) Exploring Emotional Intelligence and Human Connection. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 437-446.
Atheeth, S and Arora, M (2022) Simulation of Piezoelectric Disc & Micromachined Ultrasound Transducer. In: 2022 IEEE International Conference on Electronics, Computing and Communication Technologies, CONECCT 2022, 8 - 10 July 2022, Bangalore.
Babanagar, N and Mahalingam, A and Varghese, K and Sahadevan, V (2023) Geometric control of short-line match casting using Computational BIM. In: 40th International Symposium on Automation and Robotics in Construction, ISARC 2023, 5-7 July 2023, Chennai, pp. 379-386.
Babu, M. Dilli and Shree, Jeevitha D and Prabhakar, Gowdham and Saluja, Kamal Preet Singh and Pashilkar, Abhay and Biswas, Pradipta (2019) Estimating Pilots' Cognitive Load From Ocular Parameters Through Simulation and In-Flight Studies. In: JOURNAL OF EYE MOVEMENT RESEARCH, 12 (3).
Babu, MD and Prabhakar, G and Jeevithashree, DV and Saluja, KPS and Pashilkar, A and Biswas, P (2019) Using Eye gaze tracker to automatically estimate pilots' cognitive load. In: 50th Annual International Symposium of the Society of Flight Test Engineers, SFTE 2019, 10 - 14 June 2019, Toulouse, pp. 237-247.
Baichapur, Gautham S and Gugale, Harshala and Maheshwari, Ashveen and Bhargav, Santosh DB and Ananthasuresh, GK (2014) A Vision-Based Micro-Newton Static Force Sensor Using a Displacement-Amplifying Compliant Mechanism (DaCM). In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 42 (2). pp. 193-210.
Bajaj, K and Murthy, S and Kumar, T (2024) A Conversational Platform for Market Complexes. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 34-43.
Balakrishnan, N and Kumar, T (2024) SensaCalm Jacket � A Novel Way of Transforming Autism Therapy. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 112-121.
Balaraman, S and Chakrabarti, Amaresh and Gurumoorthy, B and Sen, Dibakar (2017) A Real Time Automatic Ergonomic Measure in Identifying Postural Deviation for the Assessment of Manual Assembly. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 479-488.
Balaraman, Santhi and Chakrabarti, Amaresh and Gurumoorthy, Balan and Sen, Dibakar (2018) Automated identification of distinct events in an assembly process using tracking of body postures. In: CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, 26 (2, SI). pp. 198-207.
Bhalla, Kriti and Kumar, Tarun and Rangaswamy, Jananee (2018) An Integrated Rural Development Model based on Comprehensive Life-Cycle Assessment (LCA) of Khadi-Handloom Industry in Rural India. In: 25th CIRP Life Cycle Engineering (LCE) Conference, APR 30-MAY 02, 2018, Copenhagen, DENMARK, pp. 493-498.
Bharadwaj, S and Shah, KN and Zhao, Y and Harindranath, A and George, A and Krishnan, KB and Arora, M (2022) Semi-blinded freehand 3D ultrasound with novice users. In: Medical Imaging 2022: Image Perception, Observer Performance, and Technology Assessment, 21 - 27 March 2022, Virtual, Online at San Diego, California, United States.
Bharti, P and Bhide, S and Savaliya, C (2024) Navigating Real-To-Virtual Onboarding: A Holistic Exploration and Framework for Immersive Transitions. In: 16th International Conference on Virtual, Augmented and Mixed Reality, VAMR 2024, held as part of the 26th HCI International Conference, HCII 2024, 29 June 2024through 4 July 2024, Washington, USA, pp. 3-15.
Bhaskaran, A and Arora, M (2024) Automatic filter selection for Hilbert autocorrelation and cyclic repetition frequency based fPCG analysis. In: Biomedical Signal Processing and Control, 92 .
Bhaskaran, A and Arora, M (2023) Evaluation of cyclic repetition frequency based algorithm for fetal heart rate extraction from fetal phonocardiography. In: Biomedical Signal Processing and Control .
Bhaskaran, A and Sidhesh Kumar, J and George, S and Arora, M (2022) Heart rate estimation and validation algorithm for fetal phonocardiography. In: Physiological Measurement, 43 (7).
Bhat, MR and Murty, CRL and Venkatesha, HS and Marulappa, YB (2008) Study of fatigue crack growth in titanium alloy under ambient and corroded condition using acoustic emission technique. In: Proceedings of 24th Annual Inhouse Symposium on Space Science and Technology , January 2008, Bangalore.
Bhatia, Nitesh and Pathak, Anand V and Sen, Dibakar (2015) Modeling visually guided hand reach for Digital Human Models. In: 6th International Conference on Applied Human Factors and Ergonomics (AHFE), JUL 26-30, 2015, Las Vegas, NV, pp. 3820-3827.
Bhatt, AN and Bhaumik, R and Chandran, KM and Chakrabarti, A (2019) IISC DBox: A game for children to learn design thinking. In: ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2019, 18 - 21 August 2019, Anaheim.
Bhatt, AN and Chakrabarti, A (2022) Gamification of design thinking: a way to enhance effectiveness of learning. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 36 .
Bhatt, AN and Majumder, A and Chakrabarti, A (2021) Analyzing the modes of reasoning in design using the SAPPhIRE model of causality and the Extended Integrated Model of Designing. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM .
Bhatt, AN and Suressh, L and Chakrabarti, A (2021) Design Thinking Instructions and Cognitive Processes. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, pp. 335-347.
Bhattacharya, K and Chakrabarti, A (2023) Application of SAPPhIRE Model of Causality in the Design of Product-Service Systems. In: 9th International Conference on Research into Design, ICoRD 2023, 9 January 2023through 11 January 2023, Bengaluru, pp. 527-539.
Bhattacharya, K and McGuigan, S and Nambiar, GD and Gangopadhyay, S (2023) Closed-Loop Agile Development Delivers Efficiency and Compliance in Industry 4.0 in the Regulated Sector. In: 9th International Conference on Research into Design, ICoRD 2023, 9 January 2023through 11 January 2023, Bengaluru, pp. 1189-1201.
Bhaumik, R and Bhatt, A and Kumari, MC and Raghu Menon, S and Chakrabarti, A (2019) A gamified model of design thinking for fostering learning in children. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 1023-1036.
Bhaumik, R and Prajapati, S and Kumar, T and Bhalla, K and Ashok, SS (2022) Smart Vernacular Architecture: A Framework for Assessment and Virtual Reality-based Visualisation of Indigenous Toda Dwellings. In: 2022 International Conference on Machine Learning and Data Engineering, ICMLDE 2022, 7- 8 September 2022, Dehradun, pp. 651-670.
Bhaumik, R and Prajapati, SP and Kumar, T and Mishra, V and Bhalla, K (2019) An Inclusive Community Based Water Purification and Monitoring System for the Base of the Pyramid. In: 2019 IEEE Global Humanitarian Technology Conference (GHTC), 17-20 Oct. 2019, Seattle, WA, USA, USA.
Bhole, K and Shivakumar, ND and Chauhan, SS and Tonannavar, S (2022) Cellulose nanofiber networked bamboo particle-based biocomposites. In: Polymer Composites, 43 (2). 977 -986.
Bhupalam, RV and Kumar, T (2024) EdConnect: A User-Centred Platform for Enhancing International Student Success Through Peer Networking. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 135-144.
Biswas, P and Prabhakar, G (2018) Detecting drivers’ cognitive load from saccadic intrusion. In: Transportation Research Part F: Traffic Psychology and Behaviour, 54 . pp. 63-78.
Biswas, P and Saluja, KS and Arjun, S and Murthy, L and Prabhakar, G and Sharma, VK and Dv, JS (2020) COVID-19 Data Visualization through Automatic Phase Detection. In: Digital Government: Research and Practice, 1 (4).
Biswas, Pradipta and Halder, Ankit and Maheshwary, Khushboo and Arjun, Somnath (2017) Inclusive Personlization of User Interfaces. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 295-306.
Biswas, Pradipta and Jeevithashree, D (2018) Eye Gaze Controlled MFD for Military Aviation. In: 23rd International Conference on Intelligent User Interfaces (IUI), MAR 07-11, 2018, Tokyo, JAPAN, pp. 79-89.
Biswas, Pradipta and Prabhakar, Gowdham and Rajesh, J and Pandit, Kavesh and Halder, Ankit (2017) Improving Eye Gaze Controlled Car Dashboard using Simulated Annealing. In: 31st International BCS Human Computer Interaction Conference: Digital Make Believe, HCI 2017, 3 - 6 July 2017, Sunderland.
Biswas, Pradipta and Roy, Swarnabha and Prabhakar, Gowdham and Rajesh, J and Arjun, Somnath and Arora, Manish and Gurumoorthy, B and Chakrabarti, Amaresh (2017) Interactive Sensor Visualization for Smart Manufacturing System. In: 31st International BCS Human Computer Interaction Conference: Digital Make Believe, HCI 2017. Electronic Visualisation and the Arts (EVA 2017) (EVA), 11–13 July 2017, Sunderland.
Biswas, Pradipta and Twist, Samuel and Godsill, Simon J (2017) Intelligent Finger Movement Controlled Interface for Automotive Environment. In: 31st International BCS Human Computer Interaction Conference: Digital Make Believe, HCI 2017, 3 - 6 July 2017, Sunderland.
Blow, Nikolaus and Biswas, Pradipta (2017) A pointing facilitation system for motor-impaired users combining polynomial smoothing and time-weighted gradient target prediction models. In: Assistive Technology, 29 (1). pp. 48-60. ISSN 1040-0435
Braha, Dan and Brown, David C and Chakrabarti, Amaresh and Dong, Andy and Fadel, George and Maier, Jonathan RA and Seering, Warren and Ullman, David G and Wood, Kristin (2014) DTM AT 25: ESSAYS ON THEMES AND FUTURE DIRECTIONS. In: ASME International Design Engineering Technical Conferences / Computers and Information in Engineering Conference (IDETC/CIE), AUG 04-07, 2013, Portland, OR.
Chakrabarti, Amaresh (2010) A course for teaching design research methodology. In: AI EDAM (Artificial Intelligence for Engineering Design, Analysis and Manufacturing), 24 (3, Sp. Iss. SI). pp. 317-334.
Chakrabarti, A (2006) Design Creativity - Definition, Influences, Measures and Methods. In: Proceedings of the Design 2006 Conference, May 2006, Dubrovnik, Croatia.
Chakrabarti, A (2007) The Future of Product Development in India. In: The Future of Product Development:, Springer Verlag, Berlin Heidelberg, 2007 (also Keynote paper at the Proceedings of the 17th CIRP Design Conference, 26-28 March, 2007, Berlin.
Chakrabarti, A (2009) A Supporting Biomimetic and Artificial Inspiration of New Ideas for Novel Micro and Nano-systems design. In: 4th Indo-Japan Seminar, 8-15 March 2009.
Chakrabarti, A (2022) Types of Designers and How to Develop Them. In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 367-382.
Chakrabarti, A (2023) What is Industry 4.0 for India? In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 167-182.
Chakrabarti, A and Gupta, A (2007) Design for Emotions. In: International Conference on Engineering Design (ICED07),, August 2007, Paris, France.
Chakrabarti, A and Taura, T (2006) Computational Support Of Synthesis And Analysis Of Behaviour Of Artefacts Using Physical Effects: Some Challenges. In: International Design Conference - Design 2006, 1-2 (36). pp. 1-8.
Chakrabarti, Amaresh (2012) Learning from the past, peering into the future: 25 Years of AI EDAM. In: AI EDAM (Artificial Intelligence for Engineering Design, Analysis and Manufacturing), 26 (1). pp. 3-6.
Chakrabarti, Amaresh (2006) An Overview of Research at IdeasLab. In: Indo-US Workshop on Design Engineering, Hotel Chancery, January 2006, Bangalore.
Chakrabarti, Amaresh and Acharya, Shakuntala and Ranjan, B S C and Devadula, Suman and Ghadge, Kiran and Madhusudanan, N and Uchil, Praveen and Srinivasan, V and Ameta, Gaurav and Rachuri, Sudarsan (2017) InDeaTe-A Computer-Based Platform with a Systematic Design Template and a Database of Methods and Tools. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA Date, pp. 277-289.
Chakrabarti, Amaresh and Blessing, Lucienne (2016) A Review of Theories and Models of Design. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 95 (4). pp. 325-340.
Chakrabarti, Amaresh and Morgenstern, Stefan and Knaab, Helge (2004) Identification and application of requirements and their impact on the design process: a protocol study. In: Research in Engineering Design, 15 (1). 22 -39.
Chakrabarti, Amaresh and Sarkar, Prabir and Leelavathamma, B and Nataraju, BS (2005) A functional representation for aiding biomimetic and artificial inspiration of new ideas. In: Artificial Intelligence For Engineering Design Analysis and Manufacturing, 19 (2). pp. 113-132.
Chakrabarti, Amaresh and Shea, Kristina and Stone, Robert and Cagan, Jonathan and Campbell, Matthew and Hernandez, Noe Vargas and Wood, Kristin L (2011) Computer-Based Design Synthesis Research: An Overview. In: Journal of Computing and Information Science in Engineering, 11 (2). 021003 (10.
Chakrabarti, Amaresh and Shu, LH (2010) Biologically inspired design. In: AI EDAM (Artificial Intelligence for Engineering Design, Analysis and Manufacturing), 24 (4, Sp.). pp. 453-454.
Chakrabarti, Amaresh and Siddharth, L and Dinakar, Madhuri and Panda, Megha and Palegar, Neha and Keshwani, Sonal (2017) Idea Inspire 3.0-A Tool for Analogical Design. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 475-485.
Chakrabarti, Amaresh and Singh, Vishal (2007) A method for structure sharing to enhance resource effectiveness. In: Journal of Engineering Design, 18 (1). pp. 73-91.
Chakrabarti, Amaresh and Srinivasan, V and Ranjan, BSC and Lindemann, Udo (2013) Case for multiple views of function in design based on a common definition. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 27 (3). pp. 271-279.
Chakrapani, A and Kumar, T and Shivakumar, S and Bhaumik, R and Bhalla, K and Prajapati, S (2020) A Pandemic-specific 'Emergency Essentials Kit' for Children in the Migrant BoP communities. In: 2020 IEEE International Smart Cities Conference, ISC2 2020, 28 September - 1 October 2020, Piscataway.
Chakravarthi, B and Prabhu Prasad, BM and Chethana, B and Pavan Kumar, BN (2022) Real-time Human Motion Tracking and Reconstruction using IMU Sensors. In: 022 2022 IEEE International Conference on Electrical, Computer, and Energy Technologies, ICECET 2022Prague20 J 2022 IEEE International Conference on Electrical, Computer, and Energy Technologies, ICECET, 20 - 22 July 2022, Prague.
Chandra, Anupam and Uchil, Praveen (2017) Art of Designing an e-Art Gallery. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 537-546.
Chandran, KM and Ramamurthy, PC and Kanjo, K and Narayan, R and Menon, SR (2021) Efficacy of ultraviolet-C devices for the disinfection of personal protective equipment fabrics and N95 respirators. In: Journal of Research of the National Institute of Standards and Technology, 126 .
Chethan, DS and Venkatesh, GS and Srinivas, Gunti Ranga and Vinod Kumar, CS (2017) Experimental and Numerical Modeling of Hemp–Polyester Composites. [Book Chapter]
Chitra, KN and Abhilash, RM and Chauhan, SS and Venkatesh, GS and Shivkumar, ND (2018) Characterization of wood polymer composite and design of root trainer. In: 1st International Conference on Design, Materials and Manufacture, ICDEM 2018, 29 - 31 January 2018, Karnataka.
Chowdhury, AR (2022) Learning to Listen and Move: An Implementation of Audio-Aware Mobile Robot Navigation in Complex Indoor Environment. In: 39th IEEE International Conference on Robotics and Automation, ICRA 2022, 23 - 27 May 2022, Philadelphia, pp. 3699-3705.
Chulvi, Vicente and Mulet, Elena and Chakrabarti, Amaresh and Lopez-Mesa, Belinda and Gonzalez-Cruz, Carmen (2012) Comparison of the degree of creativity in the design outcomes using different design methods. In: Journal of Engineering Design, 23 (4). pp. 241-269.
Chulvi, Vicente and Sonseca, Agueda and Mulet, Elena and Chakrabarti, Amaresh (2012) Assessment of the Relationships Among Design Methods, Design Activities, and Creativity. In: JOURNAL OF MECHANICAL DESIGN, 134 (11).
Damayanthi Jesudas, B and Gurumoorthy, B (2017) Domain Specific Named Entity Extraction for Modeling and Populating Ontologies. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 751-760.
Das, B and Singh, V (2023) A Preliminary Framework and Empirical Studies on Leveraging the Use of Persuasion in Product Design. In: 9th International Conference on Research into Design, ICoRD 2023, 9 January 2023through 11 January 2023, Bengaluru, pp. 489-502.
Dash, S and Kumar, T (2024) Towards Zero Waste: Strategies for Sustainable Waste Management in India. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 159-168.
Dawari, Avinash and Sen, Dibakar (2010) Relation between part position and kinematic freedom: An expository survey. In: 13th National Conference on Machines and Mechanisms, DEC 12-13, 2007, Indian Inst Sci, Bangalore.
Deb, Anindya and Shivakumar, ND (2009) An Experimental Study on Energy Absorption Behavior of Polyurethane Foams. In: Journal of reinforced plastics and composites, 28 (24). pp. 3021-3026.
Deb, A and Biswas, U and Chou, CC (2008) HIC(d) Criterion and Headform Rotational Acceleration in Vehicle Upper Interior Head Impact Safety Assessment. In: SAE 2008 World Congress, Detroit, USA, Detroit.
Deb, A and Biswas, U and Chou, CC (2008) Prediction of axial crush performance of steel hat sections using neural networks. In: Hyperworks Technology Conference (HTC) 2008.
Deb, A and Cheruvu, KS (2007) Setting initial targets in vehicle side impact safety design using regression-based modeling. In: International Journal of Crashworthiness, 12 (4). pp. 401-410.
Deb, A and Joshi, D (2012) Study on ride comfort assessment of multiple occupants using lumped parameter analysis. In: SAE 2012 World Congress & Exhibition, 16 April, 2012.
Deb, A and Mahendrakumar, MS and Chavan, C and Karve, J and Blankenburg, D and Storen, S (2004) Design of an aluminium-based vehicle platform for front impact safety. In: International Journal of Impact Engineering, 30 (8-9). pp. 1055-1079.
Deb, A and Malvade, I and Biswas, P and Schroeder, J (2007) An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperatures. In: International Journal of Adhesion and Adhesives, 28 (1-2). pp. 1-15.
Deb, A and Naravane, A (2006) An improved representation of vehicle incompatibility in frontal NCAP tests using a modified rigid barrier. In: International Journal of Crashworthiness, , 11 (1). pp. 13-25.
Deb, A and Naravane, A (2006) An improved representation of vehicle incompatibility in frontal NCAP tests using a modified rigid barrier. In: International Journal of Crashworthiness, 11 (1). pp. 13-25.
Deb, A and Raguraman, M (2006) Accurate prediction of projectile residual velocity for impact on single and multi-layered steel and aluminium plates. In: 9th International LS-DYNA Users Conference, June 2006, Detroit, USA.
Deb, A and Raguraman, M and Gupta, NK (2008) Numerical simulation of projectile impact on mild steel armour plates using LS-DYNA: Part I: Validation. In: Defence Science Journal, 58 (3). pp. 422-432.
Deb, A and Ruan, J and Cheruvu, KS (2006) A modified rgid barrier for improved assessment of occupant injury in incompatible frontal collisions. In: NCB 2006, 2006, Kolkata.
Deb, A and Srinivas, KC (2008) Development of a new lumped-parameter model for vehicle side-impact safety simulation. In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222 (D10). pp. 1793-1811.
Deb, Anindya (2008) Is The Burden of Medical Education Affecting Ethics of Medical Treatment? In: Journal of Long-Term Effects of Medical Implants, 18 (1).
Deb, Anindya and Ali, Tahsin (2004) A lumped parameter-based approach for simulation of automotive headform impact with countermeasures. In: International Journal of Impact Engineering, 30 (5). pp. 521-539.
Deb, Anindya and Chou, CC and Dutta, Utpal and Chigullapalli, Anil Kumar (2011) A practical approach for cross-functional vehicle body weight optimization. In: SAE 2011 World Congress & Exhibition, April 12, 2011, Detroit, Michigan, United States.
Deb, Anindya and Das, Sumitesh and Mache, Ashok and Laishram, Rokesh (2017) A Study on the Mechanical Behaviors of Jute-Polyester Composites. In: 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST), DEC 11-14, 2016, Indian Inst Technol, New Delhi, INDIA, pp. 631-638.
Deb, Anindya and Lakshmanan, P and Chirwa, Clive and Nowpada, Sravanthi (2012) Energy absorption behaviours of CSM-based GFRC plates with hemispherical features. In: International Journal of Crashworthiness, 17 (3). pp. 283-294.
Deo, Dhanannjay and Sen, Dibakar (2010) Mesh Processing for Computerized Facial Anthropometry. In: Journal of Computing and Information Science in Engineering, 10 (1).
Deshmukh, AA and Kumar, T (2024) Tackling Substance Abuse Among Youth in India. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 203-212.
Devadula, Suman and Chakrabarti, Amaresh (2015) DESIGN STRATEGIES FOR CIRCULAR ECONOMY. In: 20th International Conference on Engineering Design (ICED), JUL 27-31, 2015, Milan, ITALY.
Devadula, Suman and Ghadge, Kiran and Vishwanathan, Saritha and Chan, Shuk Han and Langfitt, Quinn and Dornfeld, David and Gupta, Anil and Rachuri, Sudarshan and Ameta, Gaurav and Chakrabarti, Amaresh (2017) Supporting Social Innovation: Application of InDeate Tool for Sustainable Service Design-Case Study of Community Workshops. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 139-151.
Devadula, Suman and Gurumoorthy, B and Chakrabarti, Amaresh (2015) Design for sustainability: case of designing an urban household organic waste management system. In: CURRENT SCIENCE, 109 (9). pp. 1622-1629.
Dhiman, B and Kumar, T and Rituraj, G and Bhalla, K and Chakrabarti, D (2019) Study of small scale photovoltaic applications in rural Indian household context. In: International Conference on Climate Resilient Cities - Energy Efficiency and Renewables in the Digital Era 2019, CISBAT 2019, 4 - 6 September 2019, Lausanne.
Dimri, J and Gurumoorthy, B (2005) Handling sectional views in volume-based approach to automatically construct 3D solid from 2D views. In: International Conference on Geometric Modeling and Processing, APR 13-15, 2004, Beijing.
Doss, AV and Kumar, T and Gowda, S (2024) Angel: An App for Helping Road Accident Victims. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 565-574.
G K, AV and Gogoi, G and Behera, B and Rila, S and Rangarajan, A and Pandya, HJ (2022) RapidET: a MEMS-based platform for label-free and rapid demarcation of tumors from normal breast biopsy tissues. In: Microsystems and Nanoengineering, 8 (1).
Gajrani, Kishor Kumar and Suvin, PS and Kailas, Satish Vasu and Sankar, Mamilla Ravi (2019) Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 266 . pp. 125-139.
Ganesh, D and Deb, A and Haorongbam, B and Raguraman, M (2007) An insight into performance of tubular components for vehicle crash energy management. In: National Conference on Automotive Manufacturing , , February 2007, Coimbatore, India.
Georgiev, Georgi V and Taura, Toshiharu and Chakrabarti, Amaresh and Nagai, Yukari (2008) Method of Design Through Structuring of Meanings. In: ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2008) , August 3–6, 2008, Brooklyn, New York.
Ghadge, K and Achar, T and Bhatt, A and Gurumoorthy, B and Chakrabarti, A (2020) Indoor positioning of metal parts by fingerprinting using passive RFID. In: 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering CIRP ICME 2019, 17-19, July 2019, Naples, Italy, pp. 60-63.
Ghadge, K and Chakrabarti, A (2020) A framework for knowledge management in manual assembly processes. In: 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19, July 2019, Italy, pp. 94-97.
Ghadge, Kiran and Vishwanathan, Saritha and Devadula, Suman and Langfitt, Quinn and Chan, Shuk Han and Patel, Arvindbhai and Ameta, Gaurav and Gupta, Anil and Rachuri, Sudarsan and Chakrabarti, Amaresh (2017) Application of InDeaTe Design Tool for Designing Sustainable Products-Case Study of a Natural Water Cooler. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 291-300.
Ghadge, Kiran and Vishwanathan, Saritha and Devadula, Suman and Langfitt, Quinn and Chan, Shuk Han and Ratnakar, G K and Ameta, Gaurav and Gupta, Anil and Rachuri, Sudarsan and Chakrabarti, Amaresh (2017) Application of InDeaTe Design Tool for Designing Sustainable Manufacturing Systems-Case Study of a Micro-hydel Turbine. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 313-323.
Ghosh, S and Deb, A and Tanbakuchi, M and Mahala, M (2012) Active yaw control of a vehicle using a Fuzzy logic algorithm. In: SAE 2012 World Congress & Exhibition, 16 April, 2012.
Gokul Lal, KV and Sait, U and Kumar, T and Bhaumik, R and Shivakumar, S and Bhalla, K (2020) Design and development of a smartphone-based application to save lives during accidents and emergencies. In: 2019 International Conference on Computational Intelligence and Data Science, ICCIDS 2019, 6 September 2019 through 7 September 2019, Gurugram; India, pp. 2267-2275.
Gupta, D and Viswanathan, K (2024) Estimation of surface and interface strains in deformation processing using an ensemble averaged digital image correlation method. In: Journal of Manufacturing Processes, 120 . pp. 86-95.
Gupta, RK and Gurumoorthy, B (2008) Extending feature based semantic interoperability for sheet-metal product development. In: International Conference on Trends in Product Life cycle Modeling, Simulation and Synthesis (PLMSS08), Bangalore, India.
Gupta, RK and Gurumoorthy, B (2021) Feature-based ontological framework for semantic interoperability in product development. In: Advanced Engineering Informatics, 48 .
Gupta, RK and Robin, V and Gurumoorthy, B and Girard, P (2009) A conceptual vision of interoperability of CAD tools and software to track evolution of design process. In: Proceedings of the International Conference on Product Lifecycle Management PLM'09, July 6-8, 2009, Bath, UK.
Gupta, RK and Zhang, Y and Bernard, A and Gurumoorthy, B (2017) Generic Classification and Representation of Shape Features in Sheet-Metal Parts. [Book Chapter]
Gupta, Ravi Kumar and Gurumoorthy, B (2008) A Feature-Based Framework for Semantic Interoperability of Product Models. In: Strojniski vestnik - Journal of Mechanical Engineering, 54 (6). 446 -457.
Gupta, Ravi Kumar and Gurumoorthy, B (2009) Shape-function-relationship (SFR) framework for semantic interoperability of product model. In: International Conference on Product Lifecycle Management PLM09, July 6-8, 2009, Bath, UK.
Gupta, Ravi Kumar and Gurumoorthy, B (2013) Unified Taxonomy for Reference Ontology of Shape Features in Product Model. In: IFIP WG 5.1 10th Int. Conference on Product Lifecycle Management PLM13, 6-10 July 2013, Nantes, France.
Gupta, Ravi Kumar and Gurumoorthy, Balan (2012) Automatic extraction of free-form surface features (FFSFs). In: Computer-Aided Design, 44 (2). pp. 99-112.
Gupta, Ravi Kumar and Gurumoorthy, Balan (2013) Classification, representation, and automatic extraction of deformation features in sheet metal parts. In: COMPUTER-AIDED DESIGN, 45 (11). pp. 1469-1484.
Gupta, Vikas and Deb, Anindya (2012) Speed control of brushed DC motor for low cost electric cars. In: 2012 IEEE International Electric Vehicle Conference (IEVC), 4-8 March 2012, Greenville, SC.
Hafila, U and Namdeo, Y and Mani, M (2019) Design of a portable, automated sewer-line inspection and de-clogging sewer-bot for Indian conditions. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 703-713.
Hajoary, PK and Akhilesh, KB (2021) Conceptual Framework to Assess the Maturity and Readiness Towards Industry 4.0. In: Industry 4.0 and Advanced Manufacturing, Proceedings of I-4AM 2019, 28-29 June, 2019, Indian Institute of Science (IISc), Bangalore, India, pp. 13-23.
Haorongbam, B and Deb, A and Gupta, N K (2017) Behavior of Polyurethane Foam-filled Steel Hat Sections Under Axial Loading: Testing and Simulation. In: 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST), DEC 11-14, 2016, Indian Inst Technol, New Delhi, INDIA, pp. 1349-1356.
Harindranath, A and Arora, M (2019) MEMS IMU sensor orientation algorithms-comparison in a simulation environment. In: 2018 International Conference on Networking, Embedded and Wireless Systems, ICNEWS 2018, 27 - 28 December 2018, Bangalore.
Harindranath, A and Shah, K and Devadass, D and George, A and Banerjee Krishnan, K and Arora, M (2024) IMU-Assisted Manual 3D-Ultrasound Imaging Using Motion-Constrained Swept-Fan Scans. In: Ultrasonic Imaging, 46 (3). pp. 164-177.
Harivardhini, S and Chakrabarti, Amaresh (2015) E-waste Dismantling: Profitable at the cost of Occupational Hazard? In: IEEE Conference on Technologies for Sustainability (SusTech), JUL 30-AUG 01, 2015, Ogden, UT, pp. 165-170.
Harivardhini, S and Chakrabarti, Amaresh (2016) A new model for estimating End-of-Life disassembly effort during early stages of product design. In: Clean Technologies and Environmental Policy, 18 (5, SI). pp. 1585-1598.
Harivardhini, S and Krishna, K Murali and Chakrabarti, Amaresh (2017) An Integrated Framework for supporting decision making during early design stages on end-of-life disassembly. In: JOURNAL OF CLEANER PRODUCTION, 168 . pp. 558-574.
Hebbar, PA and Bhattacharya, K and Prabhakar, G and Pashilkar, AA and Biswas, P (2021) Correlation Between Physiological and Performance-Based Metrics to Estimate Pilots' Cognitive Workload. In: Frontiers in Psychology, 12 .
Hegde, P and Visveswar, I and Nagarkatti, V and Gupta, H and Kumar, T (2024) Enhancing Electronic Retail Experiences by Leveraging Conversational UX. In: International Conference on Business and Technology, ICBT 2024, 9 April 2024through 20 April 2024, Cambridge, pp. 44-53.
Jagtap, Santosh and Larsson, Andreas and Hiort, Viktor and Olander, Elin and Warell, Anders and Khadilkar, Pramod (2014) How design process for the Base of the Pyramid differs from that for the Top of the Pyramid. In: DESIGN STUDIES, 35 (5). pp. 527-558.
Jain, A and Devadula, S and Kumar, T (2024) Assist: A Framework to Mitigate Cyberbullying in Youth. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 424-433.
Jain, M and Pande, A and Sanghavi, R and Kumar, T (2024) Innovation in Retail Accessibility: Smart Carts as Catalysts for Change in Supermarkets. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 551-560.
Jain, RM and Kumar, T (2024) Bharatiya Lipi: Unifying Indian Scripts. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 72-81.
Jayant, HK and Arora, M (2022) Droplet-on-demand metal additive manufacturing using a magnetostrictive actuator. In: Journal of Manufacturing Processes, 83 . pp. 86-96.
Jayant, HK and Arora, M (2019) Induction heating based 3D metal printing of eutectic alloy using vibrating nozzle. In: AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, 2019, 24 - 28 July 2019, Washington D.C., pp. 71-80.
Jeevithashree, D and Ray, Pallavi and Natarajan, P and Pradipta, Biswas (2017) AUTOMATING THE PROCESS OF GAZE TRACKING DATA USING SOFT CLUS TERING. In: International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT), JUL 06-07, 2017, Kannur, INDIA, pp. 449-456.
Jeevithashree, D and Saluja, Kamalpreet Singh and Biswas, Pradipta (2018) Gaze Controlled Interface For Limited Mobility Environment. In: Designing Interactive Systems Conference, DIS 2018., 9 - 13 June, 2018, Hong Kong, pp. 319-322.
Jeevithashree, DV and Ray, Pallavi and Natarajan, P and Pradipta, Biswas (2018) Automating the process of gaze tracking data using soft clustering. In: 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017, 6-7 July 2017, Kannur, pp. 449-456.
Jeevithashree, DV and Saluja, KS and Biswas, P (2019) A case study of developing gaze controlled interface for users with severe speech and motor impairment. In: Technology and Disability, 31 (1-2). pp. 66-76.
Jena, PS and Devadula, S and Kumar, T (2024) VGAI: An Artificial Intelligence-Based Intervention to Guide the Visually Impaired. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 335-344.
Jesudas, BD and Gurumoorthy, B (2018) Natural language processing driven ontology modelling to address semantic interoperability in information extraction. In: International Journal of Product Lifecycle Management, 11 (3). pp. 268-293.
Joshi, Divyanshu and Deb, Anindya (2016) EFFECT OF SITTING OCCUPANCY ON LATERAL DYNAMICS AND TRAJECTORY OF A PASSENGER CAR. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, AUG 02-05, 2015, Boston, MA.
Joshi, K and Roy Chowdhury, A (2022) Bio-Inspired Vision and Gesture-Based Robot-Robot Interaction for Human-Cooperative Package Delivery. In: Frontiers in Robotics and AI, 9 .
Joshi, RK and K S, M and R S, H and A, AK and Jayachandra, M and Dandinarasaiah, M and Pandya, HJ (2024) Automated ABR and MMN extraction using a customized headband for hearing screening. In: Biomedical Signal Processing and Control, 94 .
KS, Puneeth and Sahay, A and GH, Shreya and Biswas, P and Arora, M and Chakrabarti, A (2019) Designing an Affordable System for Early Defect Detection Using Image Processing. In: 17th International Conference on Manufacturing Research, ICMR 2019, 10-12 Sept 2019, Belfast, pp. 121-128.
Kamal, AM and Pal, UM and Manu, KS and Pandya, HJ (2022) Towards the Development of an Intraoperative Probe for Breast Cancer Margin Assessment. In: Clinical and Translational Biophotonics, Translational 2022, 24 - 27 April 2022, Fort Lauderdale.
Kannaraya, PS and Dilip, S and Deshpande, CS and Arora, M and Chakrabarti, A (2021) Smart Multi-material Weight Tracking Resource Bin. [Book Chapter]
Kannaraya, PS and Shreya, GH and Arora, M and Chakrabarti, A (2023) Impact of Smart Incoming Inspection System on the Production, in a Medical Device Manufacturing MSME. In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 157-165.
Kar, A and Sen, D (2022) Studies on Coupler Curves of a 4-Bar Mechanism with One Rolling Pair Adjacent to the Ground. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 3-18.
Karia, D and Nambiar, RS and Maurya, AP and Ramesh, A and Arora, M (2019) Application of waterfall design process in designing of a holistic system for children with hearing impairment in resource-constrained settings. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 929-940.
Karia, D and Rathnam, R and Saxena, A and Joshi, M and Ghosal, A and Arora, M and Gurumoorthy, B (2021) Design of a Heart Perfusion Device for Extending Preservation Time: A Case Study of Risk Management for a High-Risk Medical Device. In: 8th International Conference on Research into Design, 7-10 Jan 2021, pp. 679-692.
Karthika, MR and Deb, A and Venkatesh, GS (2020) An effective finite element modeling approach for prediction of the behaviour of a jute fibre-reinforced composite tube under axial impact. In: International Journal of Crashworthiness .
Karthika, MR and Deb, A and Venkatesh, GS (2021) An investigation into mechanical properties of jute�polyester laminates for numerical prediction of strength and failure. In: Polymer Composites .
Kasar, R and Kumar, T (2024) Crime Prediction and Prevention Using Design Intervention and Artificial Intelligence. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, pp. 117-134.
Kaushal, I and Chakrabarti, A (2022) System Modelling for Collecting Life Cycle Inventory (LCI) Data in MSMEs Using a Conceptual Model for Smart Manufacturing Systems (SMSs). In: International Journal of Precision Engineering and Manufacturing - Green Technology .
Kaushal, I and Siddharth, L and Chakrabarti, A (2021) A Conceptual Model for Smart Manufacturing Systems. [Book Chapter]
Kaushik, B and Chowdhury, AR (2023) Experiment of Social Robot Collaboration (SRC): Vision-Based Object Segmentation, Localization and Segregation in a Public Interaction Event. In: 25th International Conference Series on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2022, 12 - 14 September 2022, Ponta Delgada, pp. 460-472.
Kaushik, H and Kumar, T and Bhalla, K (2022) iSecureHome: A deep fusion framework for surveillance of smart homes using real-time emotion recognition. In: Applied Soft Computing, 122 .
Kavanur Ramesh, SK and Subramanya, J and Kumar, G and Kailas, SV and Mudalagi, S (2024) Optimization of Process Parameters in Friction Stir Processing for the Development of Polymer-Derived Aluminum Matrix Composites. In: 21st ISME International conference on Advances in Mechanical Engineering, ISME 2023, 13 July 2023through 15 July 2023, Bengaluru, pp. 71-79.
Kaviraj, S and Gupta, HK and Kumar, T (2024) DesignEd: A Web Based Platform to Improve Design Education. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 345-354.
Keshwani, Sonal and Chakrabarti, Amaresh (2017) Influence of analogical domains and comprehensiveness in explanation of analogy on the novelty of designs. In: RESEARCH IN ENGINEERING DESIGN, 28 (3). pp. 381-410.
Keshwani, Sonal and Chakrabarti, Amaresh (2017) Towards Automatic Classification of Description of Analogies into SAPPhIRE Constructs. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 643-655.
Keshwani, Sonal and Lenau, Torben Anker and Ahmed-Kristensen, Saeema and Chakrabarti, Amaresh (2017) Comparing novelty of designs from biological-inspiration with those from brainstorming. In: JOURNAL OF ENGINEERING DESIGN, 28 (10-12). pp. 654-680.
Khadilkar, Pramod (2017) Formulating the Design Scope for the Base of the (Economic) Pyramid. In: Design Issues, 33 (2). pp. 4-17. ISSN 0747-9360
Khadilkar, Pramod and Lokras, Shridhar and Somashekar, HI and Reddy, Venkatarama BV and Mani, Monto (2015) Capability approach-based evaluation of a biomass cook-stove design. In: CURRENT SCIENCE, 109 (9). pp. 1601-1609.
Khadilkar, Pramod Ratnakar and Mani, Monto (2015) A CAPABILITY APPROACH BASED STAKEHOLDER ANALYSIS FOR THE BASE OF THE PYRAMID: A CASE STUDY OF THE FIREWOOD BASED COOK-STOVES. In: 20th International Conference on Engineering Design (ICED), JUL 27-31, 2015, Milan, ITALY.
Khatua, V and Gurumoorthy, B and Ananthasuresh, GK (2024) A vat photopolymerization process for structures reinforced with spatially steered flexible fibers. In: Additive Manufacturing, 86 .
Kondapi, A and Kumar, T and Sait, U and Bhalla, K and Ashok, SS (2019) A case-study of slums: An informal housing for people below poverty line (BPL) in India. In: International Conference on Climate Resilient Cities - Energy Efficiency and Renewables in the Digital Era 2019, CISBAT 2019, 4 - 6 September 2019, Lausanne.
Kota, S and Chakrabarti, A (2007) Development of A Platform for Supporting Design for Environment. In: International Conference on Engineering Design (ICED07), , August 2007, Paris, France.
Kota, S and Chakrabarti, A (2007) Development of a Method for Estimating Uncertainty in Evaluation of Environmental Impacts during Design. In: International Conference on Engineering Design (ICED07), , August 2007, Paris, France.
Kota, S and Chakrabarti, A (2009) A Method for Evaluation of Product Lifecycle Alternatives under Uncertainty. In: Proc. of the 17th International Conference on Engineering Design (ICED09), 24-27 August, 2009.
Kota, S and Chakrabarti, A (2009) Understanding the needs of designers for developing environmental friendly products. In: Proc. of the International Conference on Research into Design (ICoRD09), January 2009.
Kota, Srinivas and Chakrabarti, A (2006) Understanding the evolution of product life cycle information with respect to life cycle assessment in design. In: International Conference on Product Life Cycle Management PLM06, July 2006, Bangalore.
Kota, Srinivas and Chakrabarti, Amaresh (2007) A Method for Comparative Evaluation of Product Life Cycle Alternatives under Uncertainty. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Kota, Srinivas and Chakrabarti, Amaresh (2007) Use of DfE Methodologies and Tools - Major Barriers and Challenges. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Kota, Srinivas and Chakrabarti, Amaresh (2010) A method for Estimating the Degree of Uncertainty With Respect to Life Cycle Assessment During Design. In: Journal of Mechanical Design, 132 (9).
Krishna Sharma, V and Saluja, K and Mollyn, V and Biswas, P (2020) Eye gaze controlled robotic arm for persons with severe speech and motor impairment. In: 2020 ACM Symposium on Eye Tracking Research and Applications, ETRA 2020, 2-5 June 2020, Stuttgart; Germany.
Krishnan, GCA and Vishwakarma, H and Kharsade, M and Biswas, P (2024) Comparison of View Orientation in Manned Spacecraft Through Virtual Reality Simulation. In: 2024 IEEE Space, Aerospace and Defence Conference, SPACE 2024, 22 July 2024 through 23 July 2024, Bangalore, pp. 820-823.
Krishnaswamy, Ramani and Chandran, Kumari Moothedath (2017) Connotations of Ecodesign: A Commentary on the State of Discourse. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 409-420.
Kulkarni, Gajanan Pratap and Mathew, Mary (2017) Unlocking Design Teams’ Experimentation and Go-No-Go Decision-Making: Case Study on Bangle Packaging Design Project. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 737-749.
Kumar, Mahesh S and Roy, Sukumar (2008) Recovery of Water from Sewage Effluents using Alumina Ceramic Microfiltration Membranes. In: Separation Science and Technolog, 43 (5). pp. 1034-1064.
Kumar, Gokula Vijaya AV and Chakrabarti, A (2006) Understanding of knowledge generation, capture and reuse during design process in industry and laboratory settings. In: National Conference on Design for Product Life Cycle - 2006, Birla Institute Of Technology And Science, Feb 17-18 2006, Pilani, Rajasthan, India.
Kumar, M and Mani, M (2022) Sustainability Assessment in Manufacturing for Effectiveness: Challenges and Opportunities. In: Frontiers in Sustainability, 3 .
Kumar, M and Mani, M (2021) Towards an interdisciplinary framework for effective sustainability assessment in manufacturing. In: 28th CIRP Conference on Life Cycle Engineering, LCE 2021, 10-12 Mar 2021, Jaipur; India, pp. 79-84.
Kumar, M and Mani, M (2019) A systems-based sustainability assessment framework to capture active impacts in product life cycle/manufacturing. In: 16th Global Conference on Sustainable Manufacturing, GCSM 2018, 2 October 2018 - 4 October 2018, Lexington, pp. 647-654.
Kumar, MG and Latha, GM (2022) Dynamic Properties of Soils�A Stress Path Approach. In: 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 12-15 Jul 2021, Bangalore, pp. 167-177.
Kumar, Manish and Mani, Monto (2017) A Methodological Basis to Assess and Compare Manufacturing Processes for Design Decisions. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 301-311.
Kumar, S and Kumar, S and Nagpal, PK and Gawade, SR and Salunkhe, S and Chandrasekhar, U and Davim, JP (2023) Development of the Al12SiCuFe Alloy Foam Composites with ZrSiO4 Reinforcements at Different Foaming Temperatures. In: Metals, 13 (4).
Kumar, SS and Karia, D and Gopkumar, A and Koty, PG and Arora, M (2022) Novel Methods to Understand the Temporal Nature and Accuracy of Delivery for Insulin Infusion Pumps. In: Journal of Diabetes Science and Technology .
Kumar, T and Doss, A (2022) AIRO: Development of an Intelligent IoT-based Air Quality Monitoring Solution for Urban Areas. In: 2022 International Conference on Machine Learning and Data Engineering, ICMLDE 2022, 7- 8 September 2022, Dehradun, pp. 262-273.
Kumar, T and Mani, M (2017) An energy-neutrality based evaluation into the effectiveness of occupancy sensors in buildings: An integrated life-cycle study. In: 33rd International on Passive and Low Energy Architecture Conference: Design to Thrive, PLEA 2017, 2-5 July 2017, Edinburgh; United Kingdom, pp. 2579-2586.
Kumar, T and Rao, RR and Ramamurthy, PC and Mani, M (2020) Safety of Light Emitting Diode (LED) Based Domestic Lighting in Rural Context. In: INDICON 2018 - 15th IEEE India Council International Conference, 16-18 Dec. 2018, Coimbatore, India,.
Kumar, Tarun and Mani, Monto (2017) Life Cycle Assessment (LCA) to Assess Energy Neutrality in Occupancy Sensors. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 105-116.
Kumar, Vijay AVG and Chakrabarti, A (2006) Understanding of Knowledge Generation During Design Process in Industry. In: International Conference on Product Life Cycle Management PLM06, July 2006, Bangalore.
Kumara, Kirana P (2011) Reconstructing Solid Model from 2D Scanned Images of Biological Organs for Finite Element Simulation. [Preprint] (Unpublished)
Kumara, Kirana P (2015) Simulations using meshfree methods. [Preprint] (Unpublished)
Kumara, Kirana P (2015) A literature survey on the real-time computational simulation of biological organs. [Preprint]
Kumara, Kirana P (2014) A study of the speed and the accuracy of the Boundary Element Method as applied to the computational simulation of biological organs. [Preprint] (Unpublished)
Kumara, Kirana P (2013) A study on the usefulness of Support Vector Machines for the realtime computational simulation of soft biological organs. In: Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics -- Focus: Multiphysics & Multiscale, June 12-14, 2013, Massachusetts Institute of Technology, Cambridge, Massachusetts, USA.
Kumara, Kirana P and Ghosal, Ashitava (2011) Graphics Processing Units for the Real-time Linear Elastostatic Simulation of Liver. In: International Conference on Advanced Computing & Communication Technologies (ACCT11), 20-22 January, 2011, Rohtak, India.
Kumara, Kirana P and Ghosal, Ashitava (2011) A Procedure for the 3D Reconstruction of Biological Organs from 2D Image Sequences. In: International Conference on Biomedical Engineering and Assistive Technologies (BEATs-2010), 17-19 December, 2010, Dr. B R Ambedkar National Institute of Technology, Jalandhar, India.
Kumara, Kirana P and Ghosal, Ashitava (2011) Real-time Computer Simulation of Three Dimensional Elastostatics using the Finite Point Method. In: 2011 The 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), Feb.26-28, 2011, Singapore.
Kumara, Kirana P and Ghosal, Ashitava (2011) Real-time Computer Simulation of Three Dimensional Elastostatics using the Finite Point Method. In: Applied Mechanics and Materials, 110-16 . pp. 2740-2745.
Kumara, Kirana P (2014) A Study of Speed of the Boundary Element Method as applied to the Realtime Computational Simulation of Biological Organs. In: Electronic Journal of Boundary Elements, 12 (2). pp. 1-25.
Kumara P, Kirana (2014) Codes for solving three dimensional linear elastostatic problems using constant boundary elements while ignoring body forces. [Preprint]
Kumara P, Kirana (2012) Demonstrating the Usefulness of CAELinux for Computer Aided Engineering using an Example of the Three Dimensional Reconstruction of a Pig Liver. In: International Journal of Advancements in Technology , 3 (4). pp. 301-309.
Kumara P, Kirana (2012) Extracting Three Dimensional Surface Model of Human Kidney from the Visible Human Data Set using Free Software. In: Leonardo Electronic Journal of Practices and Technologies, 11 (20). pp. 115-126.
Kumara P, Kirana (2012) A MATLAB Code for Three Dimensional Linear Elastostatics using Constant Boundary Elements. In: International Journal of Advances in Engineering Sciences(IJAES), 2 (3). pp. 9-19.
Kumaraswamy, J and Anil, KC and Canbay, CA and Shivakumar, ND (2023) Electro-Whirling Stir Casting: a Novel Approach for Fabricating Al7075/SiC MMCs with Enhanced Thermal Characteristics. In: Silicon .
Lakshmi, GS and Bhaskaran, A and Bharadwaj, SU and Arora, M (2020) Effect of Contact Force on Foetal Heart Sound Recordings. In: Proceedings of CONECCT 2020 - 6th IEEE International Conference on Electronics, Computing and Communication Technologies, 2 - 4 July 2020, Bangalore.
Lappalainen, EM and Seppänen, O and Peltokorpi, A and Singh, V (2021) Transformation of construction project management toward situational awareness. In: Engineering, Construction and Architectural Management .
Lenau, Torben Anker and Keshwani, Sonal and Chakrabarti, Amaresh and Ahmed-Kristensen, Saeema (2015) BIOCARDS AND LEVEL OF ABSTRACTION. In: 20th International Conference on Engineering Design (ICED), JUL 27-31, 2015, Milan, ITALY.
Lewis, SD and Chippar, P and Deb, A (2020) Numerical study of hydrogen absorption in a metal hydride tank embedded with multiple U-shaped cooling channel. In: 2nd International Conference on Emerging Trends in Mechanical Engineering, eTIME-2019, 9-10 August 2019, Mangaluru; India.
Liu, Ying-Chieh and Chakrabarti, Amaresh (2013) Physical realizations: transforming into physical embodiments of concepts in the design of mechanical movements. In: Advances in Mechanical Engineering . 318173_1-318173_11.
Liu, Ying-Chieh and Kao, Chin-Yu and Chakrabarti, Amaresh and Chen, Chien-Hung (2016) Innovation-supporting tools for novice designers: Converting existing artifacts and transforming new concepts. In: ADVANCES IN MECHANICAL ENGINEERING, 8 (6).
López-Mesa, B and Chakrabarti, A (2007) A Model of Decision-Making Knowledge in Conceptual Design. In: International Conference on Engineering Design (ICED07),, August 2007, Paris, France.
Mache, A and Deb, A (2024) Experimental Investigation of Mechanical Properties and Failure Mechanisms in Jute-Polyester Composite Laminates under Off-Axis Tensile Loading. In: Materials Performance and Characterization, 13 (1). pp. 111-120.
Mache, A and Deb, A and Gunti, RS (2023) Predictive modeling of jute-polyester composite tubes for impact performance: A comprehensive finite element analysis approach. In: Polymer Composites .
Mache, A and Deb, A and Gupta, N (2019) An experimental study on performance of jute-polyester composite tubes under axial and transverse impact loading. In: Polymer Composites .
Mache, Ashok and Deb, Anindya and Gupta, Narinder (2019) An experimental study on performance of jute-polyester composite tubes under axial and transverse impact loading. In: POLYMER COMPOSITES .
Madhusudanan, N and Chakrabarti, Amaresh (2011) Combining product information and process information to build virtual assembly situations for knowledge acquisition. In: ASME 2011 World Conference on Innovative Virtual Reality, June 27–29, 2011, Milan, Italy.
Madhusudanan, N and Chakrabarti, Amaresh (2014) A questioning based method to automatically acquire expert assembly diagnostic knowledge. In: COMPUTER-AIDED DESIGN, 57 . pp. 1-14.
Madhusudanan, N and Chakrabarti, Amaresh and Gurumoorthy, B (2017) Challenges and Some Potential Strategies for Relating Engineering Issues with Their Causes in Text. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 725-735.
Madhusudanan, N and Chakrabarti, Amaresh and Gurumoorthy, B (2016) Discourse analysis based segregation of relevant document segments for knowledge acquisition. In: AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 30 (4, SI). pp. 446-465.
Madhusudanan, N and Gurumoorthy, B and Chakrabarti, Amaresh (2017) Context of Text: Concepts for Recognizing Context of Acquired Knowledge from Documents. In: PRODUCT LIFECYCLE MANAGEMENT AND THE INDUSTRY OF THE FUTURE, 517 . pp. 632-641.
Madhusudanan, N and Gurumoorthy, B and Chakrabarti, Amaresh (2016) Evaluation of Methods to Identify Assembly Issues in Text. In: 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things (PLM), OCT 19-21, 2015, Doha, QATAR, pp. 495-504.
Madhusudanan, N and Gurumoorthy, B and Chakrabarti, Amaresh (2014) Segregating Discourse Segments from Engineering Documents for Knowledge Acquisition. In: 11th IFIP Working Group 5.1 International Conference on Product Lifecycle Management for a Global Market (PLM), JUL 07-09, 2014, Yokohama, JAPAN, pp. 417-426.
Madhusudanan, N and Gurumoorthy, Balan and Chakrabarti, Amaresh (2019) From natural language text to rules: knowledge acquisition from formal documents for aircraft assembly. In: JOURNAL OF ENGINEERING DESIGN, 30 (10-12). pp. 417-444.
Mahala, Manoj and Deb, Anindya (2011) An efficient hybrid approach for design of automotive wheel bearings. In: SAE 2011 World Congress & Exhibition, April 12, 2011, Detroit, Michigan, United States.
Mahesh, C and Deb, A and Kailas, SV and Shankar, Uma C and Kutty, TRG and Mahule, KN (2013) A STUDY INTO THE BEHAVIOR OF AN ALUMINUM FOAM UNDER COMPRESSION. In: 11th Asia-Pacific Conference on Engineering Plasticity and its Applications, DEC 05-07, 2012 , Singapore, SINGAPORE, pp. 64-67.
Maiti, Rina (2014) PMV model is insufficient to capture subjective thermal response from Indians. In: INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 44 (3). pp. 349-361.
Maiti, Rina (2013) Physiological and subjective thermal response from Indians. In: BUILDING AND ENVIRONMENT, 70 . pp. 306-317.
Maiti, Rina (2008) Workload assessment in building construction related activities in India. In: Applied Ergonomics, 39 (6). pp. 754-765.
Maiti, Rina and Bagchi, Tapan P (2006) Effect of different multipliers and their interactions during manual lifting operations. In: International Journal of Industrial Ergonomics, 36 (11). pp. 991-1004.
Maiti, Rina and Manikandan, K (2009) Determination of Human Thermal Comfort for Indians. In: International Ergonomics Conference on Humanizing Work and Work Environment , 17-19 December, 2009, Calcutta University.
Majumder, A and Chakrabarti, A (2023) DEVELOPMENT OF A DESIGN SUPPORT TOOL FOR SYNTHESISING MULTI-STATE MECHANICAL DEVICE CONCEPTS. In: 24th International Conference on Engineering Design, ICED 2023, 24 - 28 July 2023, Bordeaux, pp. 1455-1464.
Majumder, A and Todeti, SR and Chakrabarti, A (2023) Empirical studies on conceptual design synthesis of multiple-state mechanical devices. In: Research in Engineering Design .
Malik, A and Kumar, T (2024) Design of a Chatbot for Relieving Academic Stress in Adolescent Students. In: International Conference on Smart Computing and Communication (SmartCom 2024), January 12-13, 2024, Pune, India, pp. 83-102.
Malvade, I and Deb, A and Biswas, P and Kumar, A (2009) Numerical prediction of load-displacement behaviors of adhesively bonded joints at different extension rates and temperatures. In: Computational Materials Science, 44 (4). pp. 1208-1217.
Masood, MK and Aikala, A and Seppänen, O and Singh, V (2020) Multi-Building Extraction and Alignment for As-Built Point Clouds: A Case Study With Crane Cameras. In: Frontiers in Built Environment, 6 .
Mengi, S and Kumar, T (2024) The Vibrant Culture of Five Points, an 1830�s New York Slum. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 200-209.
Mishra, V and Kumar, T and Bhalla, K and Patil, MM (2019) SuJAL: Design and Development of IoT-Based Real-Time Lake Monitoring System. In: 3rd IEEE International Conference on Circuits, Control, Communication and Computing, I4C 2018, 3 - 5 October 2018, Bangalore.
Mishra, V and Kumar, T and Shivakumar, S and Ravishankar, VD and Bhalla, K and Dhiman, B (2019) Design and Development of Khadi-Kart: A Web-based application for rejuvenating the Handloom Industry in India. In: 2019 -9th Annual IEEE Global Humanitarian Technology Conference (GHTC), 17-20 Oct. 2019, Seattle, WA, USA.
Mitra, M and Patil, AA and Mothish, G and Kumar, G and Mukhopadhyay, A and Murthy, LRD and Chakraborty, PP and Biswas, P (2024) Multimodal Target Prediction for Rapid Human-Robot Interaction. In: 29th International Conference on Intelligent User Interfaces, IUI 2024, 18 March 2024 to 21 March 2024, Greenville, pp. 18-23.
Mitra, M and Raj, S and Kolathaya, S (2021) Inverse Kinematics Analysis of Cassie Robot using Radial Basis Function Networks. In: 2021 International Symposium of Asian Control Association on Intelligent Robotics and Industrial Automation, IRIA 2021, 20-22 Sep 2021, Goa, pp. 351-356.
Mounika, P and Karia, D and Sharma, K and Biswas, P (2019) Accessibility evaluation of three important Indian websites. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 243-254.
Moya, Sebastian and Dawari, Avinash and Onkar, Prasad S and Sen, Dibakar (2011) Mapping joint ROM on a cube using electromagnetic trackers. In: First International Symposium on Digital Human Modeling (DHM2011), 2011, Lyon France.
Mruthyunjaya, TS (2003) Kinematic structure of mechanisms revisited. In: Mechanism and Machine Theory, 38 (4). pp. 279-320.
Mudlapur, V and Kumar, T (2024) Galactostack: A 3-In-1 Stack Game for Tackling Social Media Addiction in Children Post-pandemic. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, pp. 495-505.
Mukhopadhyay, A and Mukherjee, I and Biswas, P (2019) Comparing cnns for non-conventional traffic participants. In: 11th ACM International Conference on Automotive User Interfaces and Interactive Vehicular Applications, AutomotiveUI 2019, 21 September 2019, Utrecht, pp. 171-175.
Mukhopadhyay, A and Mukherjee, I and Biswas, P (2019) Comparing shape descriptor methods for different color space and lighting conditions. In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 33 (4). pp. 389-398.
Mukhopadhyay, A and Murthy, LRD and Arora, M and Chakrabarti, A and Mukherjee, I and Biswas, P (2019) PCB inspection in the context of smart manufacturing. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 655-663.
Mukhopadhyay, A and Patel, S and Sharma, P and Biswas, P (2024) A Machine Learning-Based Framework for Real-Time 3D Reconstruction and Space Utilization in Built Environments. In: UNSPECIFIED.
Mukhopadhyay, A and Reddy, GSR and Saluja, KS and Ghosh, S and Pena Rios, A and Gopal, G and Biswas, P (2022) Virtual-reality-based digital twin of office spaces with social distance measurement feature. In: Virtual Reality and Intelligent Hardware, 4 (1). pp. 55-75.
Mukhopadhyay, A and Sharma, VK and Tatyarao, PG and Shah, AK and Rao, AMC and Subin, PR and Biswas, P (2023) A comparison study between XR interfaces for driver assistance in take over request. In: Transportation Engineering, 11 .
Mulet, E and Chakrabarti, A (2009) How Strongly Does Functional Analysis Influence Creativity? In: Proc. of the AIEPRO 2009, 2009, Bandoz, Spain.
Mulet, Escrig E and Chakrabarti, A and Vidal, Nadal R (2006) Search and Combination Cycles for an Interactive Framework for Supporting Conceptual Design. In: X Congreso Internacional De Ingenieria De Proyectos , 13-15 Sep 2006, Valencia.
Munusamy, Raguraman and Deb, Anindya and Barton, David C (2009) CAE-based approaches for designing mild steel armour plates for projectile ballistic impact. In: DYMAT, 2009, Bangalore, India.
Murthy, LRD (2020) Multimodal interaction for real and virtual environments. In: 25th International Conference on Intelligent User Interfaces, IUI 2020, 17-20 Mar 2020, Cagliari, Italy, pp. 29-30.
Murthy, LRD and Biswas, P (2022) Deep Learning-based Eye Gaze Estimation for Military Aviation. In: 2022 IEEE Aerospace Conference, AERO 2022, 5 March 2022through 12 March 2022, Big Sky.
Murthy, LRD and Mukhopadhyay, A and Yellheti, V and Arjun, S and Thomas, P and Dilli Babu, M and Singh Saluja, KP and Dv, J and Biswas, P (2020) Evaluating Accuracy of Eye Gaze Controlled Interface in Military Aviation Environment. In: IEEE Aerospace conference Proceedings, 7 - 14 March 2020, Big Sky.
Murthy, Sudhir Rama and Mani, Monto (2012) Design for sustainability: The role of CAD. In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 16 (6). pp. 4247-4256.
N, Madhusudanan and Gurumoorthy, B and Chakrabarti, Amaresh (2018) Automatic expert knowledge acquisition from text for closing the knowledge loop in PLM. In: International Journal of Product Lifecycle Management, 10 (4). pp. 301-325. ISSN 1743-5110
Nagaraja, AM and Gururaja, S (2023) A progressive damage model for ceramic matrix mini-composites with thick interphases. In: Journal of the European Ceramic Society, 43 (10). pp. 4336-4348.
Naik, ND and Kumar, T (2024) Resilience and Restoration: Pursuit of Justice and Health Post-bhopal Gas Tragedy. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 275-285.
Nair, Siddharth and Rao, Roshan and Kumar, Tarun and Prasad G, Guru and Kumar, Manish and Henna P, Khadeeja and Saifudeen, Aysha and Mani, Monto (2019) Design of a Do-It-Yourself (DIY) based Solar Powered LED Lighting System for Training and Empowering Rural youth. [Book Chapter]
Nair, Siddharth and Rao, Roshan and Kumar, Tarun and Prasad G, Guru and Kumar, Manish and Henna P, Khadeeja and Saifudeen, Aysha and Mani, Monto (2018) ‘Roshini’- Developing a DIY Rural Solar Light: utilizing products at End-of-Life (EoL) stage. In: 2018 IEEE Global Humanitarian Technology Conference (GHTC), 18 - 21 October 2018, San Jose.
Nambiar, R and Karia, D and Venkatesh, K and Ramesh, A and Thattankandy, A and Nair, S and Maurya, AP and Ramesh, A and Arora, M (2019) A Holistic Approach to the Design of Hearing Aids for Children with Hearing Impairment in Resource Constrained Settings. In: 2018 IEEE Global Humanitarian Technology Conference (GHTC).
Niriksha, D and Kumar, T (2024) Virtual Reality to Address the Impact of Emigration on Family Relationships: A Case Study of Indian Emigrants. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 179-188.
Noor El-Din, MR and Mishrif, Marwa R and Kailas, Satish V and Suvin, PS and Mannekote, Jagadeesh K (2018) Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid. In: INDUSTRIAL LUBRICATION AND TRIBOLOGY, 70 (9). pp. 1569-1579.
Onkar, Prasad S (2012) Constrained 3D sketching with haptics and active motion annotation. In: TMCE 2012, Ninth International Symposium on Tools and Methods of Competitive Engineering, May 7-11, 2012, Karlsurhe, Germany.
Onkar, Prasad S and Sen, Dibakar (2012) Behaviour simulation in computer aided product concept sketching. In: 22nd CIRP Design conference, March 28-30, 2012, Bangalore, India.
Onkar, Prasad S and Sen, Dibakar (2009) A Review of Product Sketching in Early Phases of Design. In: International Conference on Research into Design ICoRD09, January 7-9 2009.
Oraskari, J and Törmä, S and Yalcinkaya, M and Singh, V and Beetz, J (2024) Sharing Linked Building Data in a Peer-to-Peer Network: ifcOWL Meets InterPlanetary File System. In: Journal of Computing in Civil Engineering, 38 (1).
Pal, UM and Kamal, AM and Nayak, A and Medisetti, T and Pandya, HJ (2021) Towards an opto-thermo-acoustic (ota) based diagnostic tool to delineate adjacent normal from cancerous tissue for cancer margin assessment. In: 2021 European Conferences on Biomedical Optics, ECBO 2021, 20-24 Jun 2021.
Pal, Ujjwal and Liu, Ying-Chieh and Chakrabarti, Amaresh (2014) Evaluating FuncSION: A software for automated synthesis of design solutions for stimulating ideation during mechanical conceptual design. In: AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 28 (3, SI). pp. 209-226.
Panda, AK and Sitaramgupta, V and Pandya, HJ and Basu, B (2022) Electrical stimulation waveform-dependent osteogenesis on PVDF/BaTiO3 composite using a customized and programmable cell stimulator. In: Biotechnology and Bioengineering .
Panneerselvam, HT and Kumar, T and Kashyap, S (2024) Enhancing Transparency and User Experience in Food Delivery Apps. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 417-426.
Patel, AD and Chowdhury, AR (2022) Vision-Based Object Classification Using Deep Learning for Mixed Palletizing Operation in an Automated Warehouse Environment. In: 2nd International Conference on Recent Advances in Manufacturing, RAM 2021, 10 - 12 June 2021, Surat, pp. 991-1011.
Patel, AD and Chowdhury, AR (2020) Vision-based object classification using deep learning for inventory tracking in automated warehouse environment. In: International Conference on Control, Automation and Systems, 13-16 October 2020, Busan; South Korea, pp. 145-150.
Prabhakar, G and Madhu, N and Biswas, P (2018) Comparing pupil dilation, head movement, and EEG for distraction detection of drivers. In: 32nd International BCS Human Computer Interaction Conference, HCI 2018, 4 - 6 July 2018, Belfast.
Prabhakar, G and Mukhopadhyay, A and Murthy, L and Modiksha, M and Sachin, D and Biswas, P (2020) Cognitive load estimation using ocular parameters in automotive. In: Transportation Engineering, 2 .
Prabhakar, G and Rajkhowa, P and Harsha, D and Biswas, P (2022) A wearable virtual touch system for IVIS in cars. In: Journal on Multimodal User Interfaces, 16 (1). pp. 87-106.
Prabhakar, G and Ramakrishnan, A and Madan, M and Murthy, LRD and Sharma, VK and Deshmukh, S and Biswas, P (2020) Interactive gaze and finger controlled HUD for cars. In: Journal on Multimodal User Interfaces, 14 (1). pp. 101-121.
Prabhakar, Gowdham and Biswas, Pradipta (2017) Evaluation of Laser Pointer as a Pointing Device in Automotive. In: International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT), JUL 06-07, 2017, Kannur, INDIA, pp. 364-371.
Prabhakar, Gowdham and Rajesh, J and Biswas, Pradipta (2016) Comparison of three hand movement tracking sensors as cursor controllers. In: 2016 International Conference on Control Instrumentation Communication and Computational Technologies, ICCICCT 2016, 16-17 December 2016, Kumaracoil, pp. 358-364.
Prabhu, P and Chowdhury, AR (2021) Feasibility study of multi autonomous mobile robots (AMRs) motion planning in smart warehouse environment. In: 2021 18th International Conference on Ubiquitous Robots, UR 2021 . pp. 380-385.
Prabhu, P and Singh, V (2024) Fostering Experiential Learning and Situational Awareness Via Reporting and Broadcasting About Pilot Projects. In: 21st International Conference on Smart Technologies and Education, STE 2024, 6 March 2024through 8 March 2024, Helsinki, Finland, pp. 3-14.
Prabhune, Prajakta and Deb, Anindya and Balasubramani, G (2018) SIMULATION METHODOLOGY FOR OCCUPANT SAFETY ASSESSMENT OF INDIAN RAILWAY PASSENGER COACH. In: ASME Joint Rail Conference (JRC 2018), APR 18-20, 2018, Pittsburgh, PA.
Prajapati, SP and Bhaumik, R and Kumar, T (2022) An Intelligent ABM-based Framework for Developing Pandemic-Resilient Urban Spaces in Post-COVID Smart Cities. In: 2022 International Conference on Machine Learning and Data Engineering, ICMLDE 2022, 7- 8 September 2022, Dehradun, pp. 2299-2308.
Prajapati, SP and Bhaumik, R and Kumar, T and Sait, U (2020) An AI-Based Pedagogical Tool for Creating Sketched Representation of Emotive Product Forms in the Conceptual Design Stages. In: 5th International Conference on ICT for Sustainable Development, 23-24, July 2020, Panaji, pp. 649-659.
Prasad, AS and Arora, M (2023) Optimization of AlN deposition parameters for a high frequency 1D pMUT Array. In: 2023 IEEE International Ultrasonics Symposium, IUS 2023, 3 - 8 September 2023, Montreal.
Pratap, Surbhi and Sen, Dibakar (2008) Packaging for Usage: Seeds of Inspirations in Nature. In: 2nd Design Creativity Workshop .
Pratheep, N and Kumar, T and Gupta, HK (2025) Arcadio: Gameboy Chatbot for Seamless Payments. [Book Chapter]
R, S and Deb, A and Gupta, NK (2023) An experimental and numerical study on the behaviors of adhesively-bonded steel double-hat section components under axial impact loading. In: International Journal of Impact Engineering, 179 .
Raghavendra, B and Vijayalakshmi, K and Arora, Manish (2016) Intravenous Drip Meter & Controller Need Analysis and Conceptual Design. In: 8th International Conference on Communication Systems and Networks (COMSNETS), JAN 05-10, 2016, Bangalore, INDIA.
Raguraman, M and Deb, A (2006) Robust prediction of residual velocities and ballistic limits of projectiles for impact on thin aluminium plates. In: 9th International Conference on Structures Under Shock and Impact,, JUL, 2006, Wessex Inst Technol, New Forest, pp. 205-214.
Raguraman, M and Deb, A and Gupta, NK (2010) Semi-empirical procedures for estimation of residual velocity and ballistic limit for impact on mild steel plates by projectiles. In: Latin American Journal of Solids and Structures, 7 (1). pp. 63-76.
Raguraman, M and Deb, A (2007) Implementation of agile manufacturing through platform-based vehicle design. In: National Conference on Automotive Manufacturing , , February 2007, Coimbatore, India.
Raguraman, M and Deb, A and Gupta, NK (2009) CAE-based prediction of projectile residual velocity for impact on single and multi-layered metallic armour plates. In: Latin American Journal of Solids and Structures, 6 (3). pp. 247-263.
Raguraman, M and Deb, A and Gupta, NK (2007) A numerical study of projectile impact on mild steel armour plates. In: Current Science, 93 (4). pp. 498-506.
Raguraman, M and Deb, A and Gupta, NK and Kharat, DK (2008) Numerical simulation of projectile impact on mild steel armour plates using LS-DYNA, Part II: Parametric studies. In: Defence Science Journal, 58 (4). pp. 573-581. (Unpublished)
Raguraman, M and Deb, A and Jagadeesh, G (2009) A numerical study of projectile impact on thin aluminium plates. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 223 (11). pp. 2519-2530.
Raguraman, M and Jagadeesh, G and Deb, A and Barton, DC (2010) Experimental and numerical investigation of the behavior of aluminium plates upon ballistic impact. In: Experimental Techniques, 34 (6). pp. 49-60.
Raj, Ashok J and Kailas, Satish V (2016) Effect of strain rate response and pin diameter on mechanically mixed layer formation and wear mechanisms in a Ti6Al4V-SS316L pair. In: Malaysian International Tribology Conference (MITC), NOV 16-17, 2015, Penang, MALAYSIA, pp. 137-138.
Rajesh, J and Biswas, Pradipta (2017) Eye-gaze tracker as input modality for Military Aviation Environment. In: International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT), JUL 06-07, 2017, Kannur, INDIA, pp. 558-564.
Rama Krishna, K and Sen, D (2019) Motion Space of Contacting Smooth Curves in Plane Using Screw Derivative. [Book Chapter]
Ramakrishnan, A and Madan, M and Prabhakar, G and Deshmukh, S and Biswas, P (2020) Eye Gaze Controlled Head-up Display. [Book Chapter]
Ramanathan, M and Gurumoorthy, B (2005) Constructing medial axis transform of extruded and revolved 3D objects with free-form boundaries. In: Computer-Aided Design, 37 (13). 1370–1387.
Ramanathan, V and Kumar, T (2024) Cognitive and Affective Responses to Varied Coloured Light Environments. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 169-178.
Rammya, SB and Kumar, T (2024) An Interactive Smartphone Application to Manage Youth Loneliness. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, pp. 49-63.
Rana, V and Singh, V (2024) Analyzing the dimensional aspects of 3D volumetric spaces: a product-oriented perspective. In: 2024 International Design Society Conference, MAY 20 TO23, Cavtat, Dubrovnik, pp. 2433-2442.
Rana, V and Singh, V (2023) How May Modular Construction Transform the Built Environment Ecosystem? In: 19th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2022, 10-13 July 2022, Grenoble, pp. 506-515.
Rana, V and Singh, V (2024) Real Estate Insights: A Boardgame-Based Experiential Learning Approach. In: 21st International Conference on Smart Technologies and Education, STE 2024, 6 March 2024through 8 March 2024, Helsinki, Finland, pp. 15-31.
Ranadive, G and Deb, A (2012) An approach for assessing the accuracy of accelerometer responses during axial impact tests. In: International Conference on Noise and Vibration Engineering (ISMA) / International Conference on Uncertainty in Structural Dynamics (USD), SEP 17-19, 2012, KU Leuven, Dept Mech Engn, Leuven, BELGIUM, pp. 1491-1504.
Ranadive, Gauri and Deb, A and Haorongbam, Bisheshwar (2012) Evaluation of the accuracy of an accelerometer response generated by axial impact loading. In: CIRP Design 2012, 2012, Bangalore.
Ranadive, Gauri and Deb, Anindya (2012) Evaluation of the accuracy of an impact load cell using lumped parameter modeling and analysis. In: 2012 4th International Conference on Computer modeling and simulation (ICCMS 2012), 17th to 18th February 2012 , Hong Kong, China.
Ranjan, B S C and Chakrabarti, A (2017) Development and Validation of a Method for Assessment of Novelty and Requirement Satisfaction in Designing. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 589-602.
Ranjan, BSC and Siddharth, L and Chakrabarti, Amaresh (2018) A systematic approach to assessing novelty, requirement satisfaction, and creativity. In: AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 32 (4, SI). pp. 390-414.
Ranjan, BSC and Vikranth, HN and Ghosal, Ashitava (2013) A Novel Prevailing Torque Threaded Fastener and Its Analysis. In: JOURNAL OF MECHANICAL DESIGN, 135 (10).
Rao, Somasekhar T and Chakrabarti, A (2009) A How Engineers Synthesize Multiple State Mechanical Devices: an Observational Study. In: Proc. of the International Conference on Research into Design, January 2009.
Rathore, Pragam and Kota, Srinivas and Chakrabarti, Amaresh (2011) Sustainability through remanufacturing in India: a case study on mobile handsets. In: Journal of Cleaner Production, 19 (15). pp. 1709-1722.
Ravishankar, V and Vinod, V and Kumar, T and Bhalla, K (2022) Sensor Integration and Facial Recognition Deployment in a Smart Home System. [Book Chapter]
Ravivarman, S and Venkatesh, G S and Karmarkar, A and Shivkumar, N D and Abhilash, R M (2018) Optimization of Wood Plastic Composite Decks. In: 1st International Conference on Design, Materials and Manufacture (ICDEM), JAN 29-31, 2018, Surathkal, INDIA.
Reddi, Sarath and Sen, Dibakar (2011) Geometry of static balancing during posture transition. In: First International Symposium on Digital Human Modeling (DHM2011), 2011, Lyon, France.
Reddy, HV and Kumar, T (2024) Implementation of Historic Motifs in Contemporary Canvas. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024-20 April 2024, Cambridge, pp. 340-349.
Reddy, KPJ (1987) An analysis of pulse propagation through a saturable absorber having excited-state absorption. In: Optical and Quantum Electronics, 19 (4). pp. 203-208.
Reddy, Sarath and Sen, Dibakar (2008) Task Dependent Boundary Mannequins in Statistical DHM. In: SAE 11th Annual Digital Human Modeling for Design and Engineering Conference.
Rehal, A and Sen, D (2023) Generation of Homotopy Classes for Unconstrained 3D Wire Routing from Characteristic Loops. In: CAD Computer Aided Design, 164 .
S, CS and Prabhu, TR and Moganraj, A and Samuel, MS and Praveenkumar, K and Bobby, SS and Prakasam, A (2024) Effect of heat treatment on microstructure and high-temperature wear performance of additive manufactured IN718. In: Journal of Manufacturing Processes, 127 . pp. 683-697.
Sachan, D and Kumar, T (2024) mHEAL: A Comprehensive Framework to Empower and Support People with Mental Disorders. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 360-369.
Sahay, Atul and Biswas, Pradipta (2017) Webcam Based Eye Gaze Tracking Using a Landmark Detector. In: 10th Annual ACM India Compute Conference, Compute 2017, November 16 - 18, 2017, Bhopal, India, pp. 31-37.
Saidani, M and Kreuder, A and Babilonia, G and Benavides, PT and Blume, N and Jackson, S and Koffler, C and Kumar, M and Minke, C and Richkus, J and Smith, C and Wallace, M (2022) Clarify the nexus between life cycle assessment and circularity indicators: a SETAC/ACLCA interest group. In: International Journal of Life Cycle Assessment .
Sait, U and Gokul Lal, KV and Kumar, T and Bhaumik, R and Bhalla, K (2019) A framework outlining a daylight responsive model for smart buildings. In: International Conference on Climate Resilient Cities - Energy Efficiency and Renewables in the Digital Era 2019, CISBAT 2019, 4 - 6 September 2019, Lausanne.
Sait, U and KV, GL and Shivakumar, S and Kumar, T and Bhaumik, R and Prajapati, S and Bhalla, K and Chakrapani, A (2021) A deep-learning based multimodal system for Covid-19 diagnosis using breathing sounds and chest X-ray images. In: Applied Soft Computing, 109 .
Sait, U and Ravishankar, V and Kumar, T and Bhaumik, R and Gokul Lal, KV and Bhalla, K and Sanjay, KS (2020) Design and development of an assistive device for the visually impaired. In: 2019 International Conference on Computational Intelligence and Data Science, ICCIDS 2019, 6-7 September 2019, Gurugram; India, pp. 2244-2252.
Sait, U and Ravishankar, VD and Kumar, T and Shivakumar, S and Gokul Lal, KV and Bhalla, K and Singh, M and Bhaumik, R (2019) Memhans: An Assistive Device for Dementia Patients. In: 2019 IEEE Global Humanitarian Technology Conference (GHTC), 17-20 Oct. 2019, Seattle, WA, USA, USA.
Sait, U and Shivakumar, S and Gokul Lal, KV and Kumar, T and Ravishankar, VD and Bhalla, K (2019) A Mobile Application for Early Diagnosis of Pneumonia in the Rural context. In: 2019 IEEE Global Humanitarian Technology Conference (GHTC), 17-20 Oct. 2019, Seattle, WA, USA, USA.
Saluja, KS and JeevithaShree, DV and Arjun, S and Biswas, P and Paul, T (2019) Analyzing eye gaze of users with learning disability. In: 3rd International Conference on Graphics and Signal Processing, ICGSP 2019, 1 June 2019 - 3 June 2019, Hong Kong, pp. 95-99.
Samarth, RS and Kumar, T (2024) PAWN: Progressive Web Apps Wrapped Natively. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 144-153.
Samudre, P and Kailas, SV (2022) Thermal performance enhancement in open-pore metal foam and foam-fin heat sinks for electronics cooling. In: Applied Thermal Engineering, 205 .
Sandula, AK and Biswas, P and Khokhar, A and Ghose, D (2023) Multi-armed Bandit Approach for Task Scheduling of a Fixed-Base Robot in the Warehouse. [Book Chapter]
Sanjana, P and Kumar, T (2024) Mitigating Medical Errors Through User-Centered Design: Communication Platform for Patient Safety. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 223-232.
Sankar, B and Sen, D (2023) A Novel Version Control Scheme for Supporting Interrupted Product Concept Sketching. In: 9th International Conference on Research into Design, ICoRD 2023, 9 January 2023through 11 January 2023, Bangalore, pp. 395-411.
Sankar, RSP and Nair, SS and Doshi, S and Chepuri, SP (2023) Learning to Precode for Integrated Sensing and Communication Systems. In: 31st European Signal Processing Conference, EUSIPCO 2023, 4 - 8 September 2023, Helsinki, pp. 695-699.
Santhi, B and Chakrabarti, A and Gurumoorthy, B (2009) Combining time and postural analysis for the assessment of assemblability - A Case Study. In: International Conference on Research into Design, January 7-9, 2009, Bangalore, India.
Santhi, B and Chakrabarti, A and Gurumoorthy, B (2008) A New Approach for Assemblability Assessment Using Time and Postural Analysis - a Case Study. In: Research into Design - Supporting Multiple Facets of Product Development, A Chakrabarti (Ed.).
Santhosh, K and Muniraju, M and Shivakumar, ND and Raguraman, M (2012) Hygrothermal durability and failure modes of FRP for marine applications. In: JOURNAL OF COMPOSITE MATERIALS, 46 (15). pp. 1889-1896.
Sarapure, RP and Kumar, T (2024) Designing Sustainable UI/UX: An Approach to Reducing the Environmental Impact of Digital Products. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 509-518.
Saren, S and Mukhopadhyay, A and Ghose, D and Biswas, P (2023) Comparing alternative modalities in the context of multimodal human–robot interaction. In: Journal on Multimodal User Interfaces .
Sarkar, Prabir and Chakrabarti , Amaresh (2008) The effect of representation of triggers on design outcomes. In: Artificial Intelligence for Engineering, Design, and Manufacturing, 22 (2). pp. 101-116.
Sarkar, Biplab and Chakrabarti, Amaresh and Ananthasuresh, GK (2015) SYNTHESIS OF CONCEPTUAL DESIGNS FOR SENSORS USING SAPPHIRE-LITE. In: 20th International Conference on Engineering Design (ICED), JUL 27-31, 2015, Milan, ITALY.
Sarkar, Biplab and Chakrabarti, Amaresh and Ananthasuresh, GK (2017) Synthesis of feedback-based design concepts for sensors. In: RESEARCH IN ENGINEERING DESIGN, 28 (1). pp. 131-151.
Sarkar, P and Chakrabarti, A (2007) Assessing Innovation through Product Analysis. In: A Product Lifecycle Approach, Regalla Srinivasa Prakash and Kuldip Sangwan (Editors),, 2007, New Age International, India.
Sarkar, P and Chakrabarti, A (2006) Determining and measuring product novelty to ascertain innovation in product development cycle. In: National Conference on Design for Product Life Cycle-2006 Birla Institute Of Technology And Science, Feb 17-18 2006, Pilani, Rajasthan, India.
Sarkar, P and Chakrabarti, A (2008) Studying Engineering Design Creativity- Developing a Common Definition and Associated Measures. In: Invited Paper in the Proceedings of the NSF Workshop on Studying Design Creativity John Gero (Ed.).
Sarkar, P and Chakrabarti, A (2007) Understanding Search in Design. In: International Conference on Engineering Design (ICED07),, August 2007, Paris, France.
Sarkar, P and Charabarti, A (2009) A Analysing Creativity Methods. In: Proc. of the International Conference on Research into Design, January 2009, Bangalore, India.
Sarkar, Prabir and Chakrabarti, Amaresh (2006) Assessing Degree of Novelty of Products to Ascertain Innovative Products. In: International Conference on Product Life Cycle Management PLM06, July 2006, Bangalore.
Sarkar, Prabir and Chakrabarti, Amaresh (2011) Assessing design creativity. In: Design Studies, 32 (4). pp. 348-383.
Sarkar, Prabir and Chakrabarti, Amaresh (2007) Development of a Method for Assessing Design Creativity. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Sarkar, Prabir and Chakrabarti, Amaresh (2014) Ideas generated in conceptual design and their effects on creativity. In: RESEARCH IN ENGINEERING DESIGN, 25 (3). pp. 185-201.
Sarkar, Prabir and Chakrabarti, Amaresh (2017) A Model for the Process of Idea Generation. In: The Design Journal, 20 (2). pp. 239-257. ISSN 1460-6925
Sarkar, Prabir and Chakrabarti, Amaresh (2007) A tool for Supporting Protocol Analysis. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Sarkar, Prabir and Phaneendra, S and Chakrabarti, Amaresh (2008) Developing Engineering Products Using Inspiration From Nature. In: Journal of Computing and Information Science in Engineering, 8 (3). 031001-1.
Sarkar, Prabir and Phaneendra, S and Chakrabarti, Amaresh (2007) Developing Novel Technical Systems using Ideas from Nature. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Sartori, Julian and Pal, Ujjwal and Chakrabarti, Amaresh (2010) A methodology for supporting ``transfer'' in biomimetic design. In: AI EDAM (Artificial Intelligence for Engineering Design, Analysis and Manufacturing), 24 (4, Sp.). pp. 483-505.
Seetharam, A and Kumar, T and Gupta, H and Bhaumik, R (2024) A Marker-Based Augmented Reality Application to Teach Chemistry to Indian Students. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, pp. 415-435.
Seetharam, A and Kumar, T and Gupta, H and Karia, D (2023) A Web-based AR Solution for Restaurant Menus to Reduce Food Waste. In: 2023 Global Conference on Information Technologies and Communications, GCITC 2023, 1 December 2023 - 3 December 2023, Karnataka.
Selvan, KE and Sen, D (2020) Estimating functional reach envelopes for standing postures using digital human model. In: Theoretical Issues in Ergonomics Science, 21 (2). pp. 153-182.
Sen, Dibakar and Pudke, Shubham and Dhanawade, Suyog (2016) Sanitary Napkin Wearing Aid for Women with One Functional Hand. In: 12th Biennial NordDesign Conference on Highlighting the Nordic Approach, AUG 10-12, 2016, Norwegian Univ Sci & Technol, Trondheim, NORWAY, pp. 288-298.
Sen, Dibakar and Vinayak, * (2008) On a Novel Geometric Representation of Rotation. In: SAE 11th Annual Digital Human Modeling for Design and Engineering Conference, 2008-06-17, Pittsburgh, PA.
Sen, Dibakar and Vipin, JS (2008) Describing Hand Postures: Inspirations from Classical Mudras. In: SAE 11th Annual Digital Human Modeling for Design and Engineering Conference.
Sen, SK (1979) Nonnegative solution of linear equations. In: Journal of the Indian Institute of Science, 61 (1). pp. 41-50.
Shah, K and Arora, M (2024) Considerations in the testing of a minimum viable product in healthcare. In: 2024 International Design Society Conference,, 20-23 MAY2024, Cavtat, Dubrovnik, pp. 1677-1686.
Shah, K and Arora, M (2021) Requirements Capture and Validation: Adopting the Lean Approach for Task Clarification. In: 8th International Conference on Research into Design, 7-10 Jan 2021, pp. 733-744.
Sharma, VK and Biswas, P (2021) Gaze Controlled Safe HRI for Users with SSMI. In: 20th International Conference on Advanced Robotics, ICAR 2021, 6-10 Dec 2021, Ljubljana, pp. 913-918.
Sharma, VK and Murthy, LRD and Biswas, P (2022) Enabling Learning Through Play: Inclusive Gaze-Controlled Human-Robot Interface for Joystick-Based Toys. In: 14th International Conference on Social Robotics, ICSR 2022, 13 - 16 December 2022, Florence, pp. 452-461.
Sharma, VK and Murthy, LRD and Singh Saluja, K and Mollyn, V and Sharma, G and Biswas, P (2020) Webcam controlled robotic arm for persons with SSMI. In: Technology and Disability, 32 (3). pp. 179-197.
Shenoy, P and Kumar, T (2023) A System for Regulation of Anxiety-based Symptoms. In: 2023 Global Conference on Information Technologies and Communications, GCITC 2023, 1 December 2023 - 3 December 2023, Karnataka.
Shivakumar, NS and Arora, M and Mani, M (2018) A Proposed Design of an Universal Electrochemical Reader Based on a Collated Medical Device Innovation Framework and Systems Thinking. In: Fourth International Conference on Biosignals, Images and Instrumentation (ICBSII), Chennai, India, 22-24 March, 2018, Chennai, India, pp. 206-212.
Shreya, HR and Kumar, T (2024) Artificial Intelligence Tools and Chatbots for Design Education. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, India, pp. 377-395.
Shreya, HR and Kumar, T (2024) Impact of Artificial Intelligence Tools and Text-to-3D Model Generators on Interior Design. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, India, pp. 465-478.
Siddharth, L and Chakrabarti, A and Ranganath, R (2020) Modeling and structuring design rationale to enable knowledge reuse. In: Systems Engineering, 23 (3). pp. 294-311.
Siddharth, L and Chakrabarti, Amaresh (2018) Evaluating the impact of Idea-Inspire 4.0 on analogical transfer of concepts. In: AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 32 (4, SI). pp. 431-448.
Siddharth, L and Chakrabarti, Amaresh and Venkataraman, Srinivasan (2018) REPRESENTING COMPLEX ANALOGUES USING A FUNCTION MODEL TO SUPPORT CONCEPTUAL DESIGN. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2018, 26 - 29 August, 2018, Quebec City, Canada.
Siddharth, L and Madhusudanan, N and Chakrabarti, A (2020) Toward automatically assessing the novelty of engineering design solutions. In: Journal of Computing and Information Science in Engineering, 20 (1).
Siddharth, L and Sarkar, Prabir (2017) A Methodology for Predicting the Effect of Engineering Design Changes. In: 27th CIRP Design Conference, MAY 10-12, 2017, Cranfield Univ, Cranfield, ENGLAND, pp. 452-457.
Siddharth, L and Sarkar, Prabir (2018) A Multiple-Domain Matrix Support to Capture Rationale for Engineering Design Changes. In: JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 18 (2).
Sinduja, B and Kumar, T (2024) An Intelligent App-based System for Waste Segregation and Collection. In: ICMLDE 2023, 23 November 2023through 24 November 2023, Dehradun, pp. 2843-2856.
Singh, AK and Christie, L and Gurumoorthy, B (2020) Octree-based voxel model for representation of spatial conflicts detected using domain mapping matrix across multiple design domains. In: International Journal of Product Lifecycle Management, 12 (3). pp. 250-268.
Singh, Arun Kumar and Gurumoorthy, B and Christie, Latha (2017) Empty Space Modelling for Detecting Spatial Conflicts Across Multiple Design Domains. In: PRODUCT LIFECYCLE MANAGEMENT AND THE INDUSTRY OF THE FUTURE, 517 . pp. 223-230.
Singh, S and Chakrabarti, A (2024) Assessment of structuredness of problems in design. In: International Design Society Conference, Design 2024, 20 May 2024 through 23 May 2024, Cavtat, Dubrovnik, pp. 1085-1094.
Singh, S and Makharia, A and Chakrabarti, A (2019) Modelling of causal relations in human pathophysiology for medical education and design inspiration. In: 7th International Conference on Research into Design, ICoRD 2019, 9 - 11 January 2019, Bangalore, pp. 235-246.
Singh, V (2020) Developing BIM Thinking: Fundamental Objectives and Characteristics of BIM to Think Critically About in BIM Research and Implementation. In: IFIP Advances in Information and Communication Technology, 5 - 8 July 2020, Rapperswil, pp. 766-782.
Singh, V and Bolpagni, M (2023) Effects of trigger events on innovation behaviour: insights from the data collected from construction professionals during COVID-19. In: Construction Management and Economics .
Singh, V and Mirzaeifar, S (2020) Assessing transactions of distributed knowledge resources in modern construction projects � A transactive memory approach. In: Automation in Construction, 120 .
Singh, V and Mirzaeifar, S (2021) Towards Socio-Technical Network Analysis (STNA) in the Connected World of Industry 4.0 and Digital Manufacturing. [Book Chapter]
Singh, V and Srinivasan, V (2021) Design of Multifunctional Artefacts as Perceived by Potential Users: Findings from a Preliminary Investigation. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, pp. 483-495.
Singh, V and Srinivasan, V (2021) Patterns and Insights From a Design Group�s Mobile Chat�Preliminary Findings and Commentary on Participation in Online Communities. In: 8th International Conference on Research into Design, ICoRD 2021, 7-10 Jan 2021, pp. 497-508.
Sinha, A and Kumar, T (2024) Enhancing Medical Diagnostics: Integrating AI for precise Brain Tumour Detection. In: ICMLDE 2023, 23 November 2023through 24 November 2023, Dehradun, pp. 456-467.
Sinha, A and Kumar, T (2024) An Integrated Framework for Smart Fogponics Indoor Gardening in Compact Living Spaces. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 122-131.
Sinha, A and Kumar, T (2023) An Integrated Framework for Vertical Farming in Developing Countries. In: 2023 Global Conference on Information Technologies and Communications, GCITC 2023, 1 December 2023 - 3 December 2023, Karnataka.
Sneha, RK and Kumar, T (2024) A Framework Proposal for Bookstore-cum-Library Optimisation. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 457-467.
Sneha, RK and Kumar, T (2025) Neurocognitive Enhancement: Visual Sequential Pattern Stimulation for ADHD Symptom Alleviation. [Book Chapter]
Somarajan, SP and Kailas, SV (2018) Study and comparison of lubricity of green and commercial cutting fluid using tool-chip tribometer. In: Tribology Online, 13 (6). pp. 340-350.
Somasekhara Rao, T and Chakrabarti, A (2007) AN EMPIRICAL STUDY OF SYNTHESIS OF MULTIPLE STATE DEVICES BY ENGINEERING DESIGNERS. In: 13th National Conference on Machines and Mechanisms, NaCoMM 2007, 12 December 2007 through 13 December 2007, Bangalore, pp. 233-240.
Somasekhara Rao, T and Chakrabarti, Amaresh (2007) An Empirical Study of Synthesis of Multiple State Devices by Engineering Designers. In: 13th National Conference on Mechanisms and Machines (NaCoMM07),, December 12-13, 2007, IISc, Bangalore, India.
Soni, Khushboo and Arjun, Somnath and Biswas, Pradipta (2017) User inclusive crowd sourcing disaster reporting system: Reporting and forecast. In: 2016 International Conference on Control Instrumentation Communication and Computational Technologies, ICCICCT 2016, 16-17 December 2016, Kumaracoil, pp. 365-373.
Soundarya, NP and Kumar, T (2025) A Digital Platform for Smart Factories Deploying Digital Twins. [Book Chapter]
Sreenivasan, A and Vizhian, Paul S and Shivakumar, ND and Muniraju, M and Raguraman, M (2011) A study of microstructure and wear behaviour of TiB2/Al metal matrix composites. In: Latin American Journal of Solids and Structures, 8 (1). pp. 1-8.
Srihari, S and Satapathy, S and Kumar, T (2024) Sustainable Harvesting: Stubble Burning and the Battle Against Air Pollution. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 389-398.
Srinivas, G R and Deb, A and Sanketh, R and Gupta, N K (2017) An Enhanced Methodology for Lightweighting a Vehicle Design Considering Front Crashworthiness and Pedestrian Impact Safety Requirements. In: 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST), DEC 11-14, 2016, Indian Inst Technol, New Delhi, INDIA, pp. 623-630.
Srinivas, GR and Kumar, MN and Deb, A (2017) Adjacent disc stress following floating lumbar Spine fusion: A finite element study. In: Asian Spine Journal, 11 (4). pp. 538-547.
Srinivas, K and Chakrabarti, A (2007) Understanding the Evolution of uncertainty of Information about Product Life Cycle with respect to Life Cycle Assessment in Design. In: A Product Lifecycle Approach, Regalla Srinivasa Prakash and Kuldip Sangwan (Editors), , 2007, New Age International, India.
Srinivas, K and Chakrabarti, A (2006) Understanding the evolution of information about product life cycle with respect to life cycle assessment in design. In: National Conference on Design for Product Life Cycle-2006 Birla Institute Of Technology And Science, Feb 17-18 2006, Pilani, Rajasthan, India.
Srinivas, MS and Panneer, R and Suvin, PS and Kailas, SV (2021) Synthesis and Testing of Novel Neem Oil-Based Cutting Fluid with Ionic Liquid Additives. [Book Chapter]
Srinivasan, V and Chakrabarti, * (2009) A Evaluation of the GEMS of SAPPhIRE Model of Designing for Aiding Design for Novelty. In: Proc. of the International Conference on Research into Design (ICoRD09), January 2009, Bangaluru, India.
Srinivasan, V and Chakrabarti, A (2009) An Empirical Evaluation of Novelty-SAPPhIRE Relationship. In: ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2009), August 30 - September 2, 2009.
Srinivasan, V and Chakrabarti, A (2010) Investigating novelty-outcome relationships in engineering design. In: AI EDAM (Artificial Intelligence for Engineering Design, Analysis and Manufacturing), 24 (2). pp. 161-178.
Srinivasan, V and Chakrabarti, A (2008) Novelty-SAPPhIRE Relationship: An Empirical Study. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis (PLMSS20).
Srinivasan, V and Chakrabarti, A (2009) Sapphire – an Approach to Analysis and Synthesis. In: Proc. of the 17th International Conference on Engineering Design (ICED09) , 23-27 August, 2009.
Srinivasan, V and Chakrabarti, A (2009) A Theoretical Comparison of a Framework with Existing Models and Frameworks. In: Proc. of the International Association of Societies of Design Research Conference (IASDR2009), 18-22 October, 2009.
Srinivasan, V and Chakrabarti, Amaresh (2007) GEMS of SAPPhIRE: A Framework for Designing? In: 13th National Conference on Mechanisms and Machines (NaCoMM07),, December 12-13, 2007, IISc, Bangalore, India.
Srinivasan, V and Chakrabarti, Amaresh (2010) An Integrated Model of Designing. In: Journal of Computing and Information Science in Engineering, 10 (3, Sp.).
Srinivasan, V and Chakrabarti, Amaresh and Lindemann, Udo (2015) An empirical understanding of use of internal analogies in conceptual design. In: AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 29 (2, SI). pp. 147-160.
Srinvasanl, R and Lohith, CP and Kadadevaramth, Rajeshwar S and Shrisha, S (2015) Strategic Marketing and Innovation Performance of Indian MSMEs. In: Portland International Conference on Management of Engineering and Technology (PICMET), AUG 02-06, 2015, Portland, OR, pp. 127-133.
Srivastava, S and Maiti, R (2019) Multi-lane Detection Robust to Complex Illumination Variations and Noise Sources. In: 2019 IEEE International Conference on Electrical, Control and Instrumentation Engineering, ICECIE 2019, 25 November 2019, Malaysia.
Srivastava, S and Maiti, R (2024) Robust Lane Change Detection and Tracking in Urban Environment. In: 8th IEEE International Conference on Signal and Image Processing Applications, 3 September 2024through 5 September 2024, Kuala Lumpur.
Srivastava, S and Srivastava, P and Das, S and Gupta, HK and Kumar, T (2024) Application of Conversational UX for Navigation at Indian Railway Stations. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 179-188.
Stone, Robert B and Chakrabarti, Amaresh (2005) Special Issue: Engineering applications of representations of function, Part 2. In: Artificial Intelligence For Engineering Design, Analysis and Manufacturing, 19 (3). p. 137.
Stone, Robert B and Chakrabarti, Amaresh (2005) Engineering applications of representations of function,Part 1. In: Artificial Intelligence For Engineering Design, Analysis and Manufacturing, 19 (2). p. 63.
Stone, Robert B and Chakrabarti, Amaresh (2005) Special Issue: Engineering applications of representations of function, Part 1. In: AIE EDAM, 19 (2). p. 63.
Subbaraya, Venkatesh Gude and Karmarkar, Ajay and Deb, Anindya and Ranga, Srinivas Gunti and Dasappa, Shivakumar Neerakallu (2012) Viscoelastic, Mechanical and DOE-Based Study on PP-Nanocomposites. In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 51 (8). pp. 832-839.
Subramani, S and Gurumoorthy, B (2005) Maintaining associativity between form feature models. In: Computer-Aided Design, 37 (13). pp. 1319-1334.
Subramani, S and Nalluri, Rao SRP and Gurumoorthy, B (2004) 3D clipping algorithm for feature mapping across domains. In: Computer-Aided Design, 36 (8). pp. 701-721.
Subramaniam, RR and Kumar, T (2024) An App Based Solution for Improving Women�s Nutrition and Menstrual Health. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 379-388.
Subramanya, S and Deb, A (2016) Design of a High Speed Data Acquisition System for a Transient Rotor-Dynamic Test Rig. In: EXPERIMENTAL TECHNIQUES, 40 (2). pp. 521-529.
Sudhir, R and Manu, Monto (2011) Rejection of technology. In: International Workshop on Innovation and Sustainability Transitions in Asia, 9−11 January 2011, Kuala Lumpur, Malaysia.
Sujive, V and Kumar, T (2024) Envisioning Interior Design for Fully Autonomous Cars for the Future. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024 through 20 April 2024, Cambridge, pp. 384-393.
Sundaresh, DC and Nath, RR and Deb, A and Shankapal, SR (2006) CAE-driven design of a customized prosthesis for hemi-pelvis replacement. In: NCB 2006, 2006, Kolkata.
Sunidhi, CS and Kumar, T (2024) Learning Module for Visually-Challenged Children in the Post-covid World. In: 8th International Conference on Smart Trends in Computing and Communications, SmartCom 2024, 12 January 2024through 13 January 2024, Pune, pp. 289-303.
Swain, AK and Sen, Dibakar and Gurumoorthy, B (2009) Associativity between Product Model and Process Model. In: 6th International Conference on Product Lifecycle Management, July 6-8, 2009, Bath, UK.
Swain, Abinash Kumar and Sen, Dibakar and Gurumoorthy, B (2014) Extended liaison as an interface between product and process model in assembly. In: ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 30 (5). pp. 527-545.
Swaroop, S and Kumar, T (2024) Creating Strategies to Improve Learning Experience for ADHD Children. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 213-222.
Tejasvi, P and Kumar, T (2024) A Smart System Facilitating Emotional Regulation in Neurodivergent Children. In: ICMLDE 2023, 23 November 2023through 24 November 2023, Dehradun, pp. 3257-3270.
Tharakeshwar, Appala and Ghosal, Ashitava (2013) A THREE-WHEELED MOBILE ROBOT FOR TRAVERSING UNEVEN TERRAIN WITHOUT SLIP: SIMULATION AND EXPERIMENTS. In: MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 41 (1). 60-78.
Thencheri, A and Kumar, T (2024) Seamless Mobility: An Integrated Framework for Public Transport. In: International Conference on Business and Technology, ICBT 2024, 9 April 2024through 20 April 2024, Cambridge, pp. 286-295.
Thomas, J and Windham, J and Sethi, S and Arora, M (2020) Exploring a New Future in Collaborative Design Processes in Education. In: Advances in Intelligent Systems and Computing, 24 - 28 July 2019, Washington D.C, pp. 173-184.
Todeti, SR and Chakrabarti, A (2009) An Empirical Model of the Process of Synthesis of Multiple State Mechanical Devices. In: Proc. of the 17th International Conference on Engineering Design (ICED09, 23-27 August, 2009.
Todeti, Somasekhara Rao and Chakrabarti, Amaresh (2011) Analysing modifica-tions in the synthesis of multiple state mechanical devices using configuration space and topology graphs. In: Proceedings of the 18th International Conference on Engineering Design (ICED 11), 15-19, August, 2011, Lyngby/Copenhagen, Denmark.
Todeti, Somasekhara Rao and Chakrabarti, Amaresh (2011) Computational representations for multi state design tasks and enumeration of mechanical device behaviour. In: Proceedings of the 18th International Conference on Engineering Design (ICED 11), 15-19, August, 2011, Lyngby/Copenhagen, Denmark.
Tonannavar, S and Shivakumar, ND and Simha, KRY and Chauhan, SS and Bhole, K (2021) Quality Assessment of Artocarpus heterophyllus Log Using Nondestructive Evaluation Techniques. In: Journal of Nondestructive Evaluation, 40 (2).
Tonannavar, S and Shivakumar, ND and Simha, KRY and Shrikanth, V and Bhole, K (2023) Indentation and Fragmentation of Wood Under Low-Speed Impact. In: Journal of Dynamic Behavior of Materials .
Tripathi, C and Arora, M and Chakrabarti, A (2024) Unveiling key user experience issues to facilitate user-centred design of inertial motion capture systems. In: 2024 International Design Society Conference, 20-20 MAY 2024, Cavtat, Dubrovnik, pp. 2453-2462.
Tsujimoto, Kazuya and Miura, Shinji and Tsumaya, Akira and Nagai, Yukari and Chakrabarti, Amaresh and Taura, Toshiharu (2008) Method for Creative Behavioral Design Based on Analogy and Blending from Natural Things. In: Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 3-6, 2008, Brooklyn, New York.
Uchil, Praveen and Ghadge, Kiran and Acharya, Shakuntala and Bhinge, Raunak and Robinson, Stefanie and Dornfeld, David and Rachuri, Sudarsan and Ameta, Gaurav and Chakrabarti, Amaresh (2017) Supporting Manufacturing System Design: A Case Study on Application of InDeaTe Design Tool for a Smart Manufacturing System Design. In: 6th International Conference on Research into Design (ICoRD), JAN 09-11, 2017, Indian Inst Technol, Guwahati, INDIA, pp. 325-335.
Vasantha, Gokula Annamalai and Ramesh, Hari Prakash and Sugavanam, Chandra Mouli and Chakrabarti, Amaresh and Corney, Jonathan and Wodehouse, Andrew (2017) Interactional Differences and Effects Between Collocated and Distributed Design. In: 6th International Conference on Research into Design, ICoRD 2017, 9-11 January 2017, Guwahati, pp. 933-944.
Venkataraman, Srinivasan and Chakrabarti, Amaresh (2011) An empirical evaluation of a framework for design for variety and novelty. In: Proceedings of the 18th International Conference on Engineering Design (ICED 11), 15-19 Aug, 2011, Lyngby/Copenhagen, Denmark, .
Venkataramana, K and Singh, Ram Kumar and Deb, Anindya and Bhasin, Vivek and Vaze, KK and Kushwaha, HS (2017) Blast Protection of Infrastructure with Fluid Filled Cellular Polymer Foam. In: 11th International Symposium on Plasticity and Impact Mechanics, IMPLAST 2016, 11-14 December 2016, New Delhi, pp. 547-554.
Venkatesh, GS and Deb, A and Karmarkar, Ajay (2012) Characterization and finite element modeling of montmorillonite/polypropylene nanocomposites. In: Materials & Design, 35 . pp. 425-433.
Venkatesh, GS and Deb, A and Karmarkar, Ajay and Chauhan, Shakti S (2012) Effect of nanoclay content and compatibilizer on viscoelastic properties of montmorillonite/polypropylene nanocomposites. In: MATERIALS & DESIGN, 37 . pp. 285-291.
Venkatesh, GS and Karmarkar, A and Shivakumar, ND and Deb, A (2012) Prediction of the stiffness of nanoclay-polypropylene composites using a monte carlo finite element analysis approach. In: Proceedings of the International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM - 2012), January 4-6 2012, Howrah, India.
Venkatesh, GS and Karmarkar, Ajay and Gurumoorthy, B and Deb, A (2012) Eco-friendly wood polymer composites for sustainable design applications. In: CIRP Design 2012, 2012, Bangalore.
Venkatesh, GS and Sen, Dibakar and Chakrabarti, Amaresh (2008) Issues in Achievement of Haptic Realism. In: International Conference on Trends in Product Life cycle Modeling, Simulation and Synthesis (PLMSS08).
Venkatesh, K and Karia, D and Arora, M (2021) Clinical Investigation as an Iteration Tool for the Design of Low-Risk Medical Devices: A Case Study of an IV Drip Monitoring System. In: 11th Annual IEEE Global Humanitarian Technology Conference,, 19-23 Oct 2021, Virtual, Online, pp. 131-137.
Venkatesh, KK and Alagundagi, SS and Garg, V and Pasala, K and Karia, D and Arora, M (2022) DripOMeter: An open-source opto-electronic system for intravenous (IV) infusion monitoring. In: HardwareX, 12 .
Verma, K and Kumar, T (2024) Mitigating Violence Against Patients in a Mental Healthcare Setting Using Smart Technologies. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 23-33.
Vidya, SRS and Jonnalagadda, P and Biswas, A (2023) Characterization of Tool Eccentricity of a CNC Milling Machine Using High Speed Imaging. In: 16th International Conference on Sensing Technology, ICST 2023, 17 December 2023 through 20 December 2023, Hyderabad.
Vijay, L and Kumar, T (2024) AI-Driven Advancements: Optimising Chronic Disease Care Through Personal Health Record Management. In: International Conference on Business and Technology, ICBT 2024, 19 April 2024through 20 April 2024, Cambridge, pp. 355-364.
Vijaya Kumar, Gokula AV and Chakrabarti, A (2007) A KRIT Model for Understanding Knowledge Generation during Design Process in Industry. In: A Product Lifecycle Approach, Regalla Srinivasa Prakash and Kuldip Sangwan (Editors),, 2007, New Age International, India.
Vijaya Kumar, Gokula AV and Chakrabarti, A (2006) Understanding the knowledge needs of the designer during design process in industry. In: International Conference on Life Cycle Modelling, Synthesis and Simulation PLMSS06, December 2006, Bangalore.
Vijaykumar, AVG and Chakrabarti, A (2007) Taxonomy for Understanding Knowledge Captured in Documents by Designers. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Vijaykumar, Gokula and Chakrabarti, Amaresh (2008) Understanding the Knowledge Needs of Designers During Design Process in Industry. In: Journal of Computing and Information Science in Engineering, 8 (1).
Vijaykumar, Gokula AV and Chakrabarti, Amaresh (2007) Understanding Patterns of Interaction Between Designers during Design Process. In: Proceedings of the 16th International Conference on Engineering Design (ICED07), August 2007, Paris, France.
Vinayak, * and Sen, Dibakar (2012) A vision modeling framework for DHM using geometrically estimated FoV. In: Computer-Aided Design, 44 (1, SI). pp. 15-28.
Vipin, JS and Sen, Dibakar (2011) Simulating grasping behavior of people using the relational description scheme. In: First International Symposium on Digital Human Modeling (DHM2011), June 14-16, 2011, Lyon, France.
Vishnu, VS and George Varghese, K and Gurumoorthy, B (2023) A Hybrid Approach for Predictive Modeling of KPIs in CNC Machining Operations. In: 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2022, 13-15 July 2022, Naples, pp. 566-571.
Vishnu, VS and Varghese, KG and Gurumoorthy, B (2021) A Data-driven Digital Twin of CNC Machining Processes for Predicting Surface Roughness. In: 54th CIRP Conference on Manufacturing Ssystems, CMS 2021, 22 - 24 Sep 2021, Patras, pp. 1065-1070.
Vishnu, VS and Varghese, KG and Gurumoorthy, B (2023) A data-driven digital twin framework for key performance indicators in CNC machining processes. In: International Journal of Computer Integrated Manufacturing .
Vishwash, B and Shivakumar, ND and Sachidananda, KB (2024) Analytical investigation of green composite lamina utilizing natural fiber to strengthen PLA. In: Hybrid Advances, 7 .
Yaldiz, N and Chakrabarti, A (2024) Assessment of empowerment via inclusion of people in product lifecycle processes. In: 2024 International Design Society Conference, Design 2024, 20 May 2024 through 23 May 2024, Cavtat, Dubrovnik, pp. 1527-1536.
