|
 | Up a level |
Telpande, S and Kumar, C and Sharma, D and Kumar, P (2025) Electric current-induced solid-state crack healing and life extension. In: Acta Materialia, 283 .
Kumar, P and Malik, JN and Gahalaut, VK (2024) Heterogeneous Seasonal Deformation and Strain Budget in Himachal, NW Himalaya from new cGPS measurements: Hydrological and Seismic Hazard Implications. In: Tectonophysics, 894 .
Bansal, U and Esakkiraja, N and Baskaran, T and Paul, T and Ravi, R and Kumar, P and Jayaram, V and Paul, A (2024) Synergistic effects of Pt and Y addition in (Ni, Pt)CrAlY bond coat on oxide spallation resistance and growth of interdiffusion zone between bond coat and Ni-based single crystal superalloy. In: Corrosion Science, 240 .
Paul, S and Srikar, RP and Kumar, P and Rao, SMV (2024) A physics-based hybrid model for supercritical CO 2 ejector in critical flow regime. In: Physics of Fluids, 36 (8).
Vishwakarma, SK and Srivastava, A and Kumar, P and Dutta, P and Somnath, N (2024) TOPOLOGICAL SHAPE AND PERFORMANCE OPTIMISATION OF MICROCHANNEL DIFFUSION-BONDED HEAT EXCHANGERS USED IN SCO2 BRAYTON CYCLE. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, 24 June 2024through 28 June 2024, London.
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2024) Experimental investigations on a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 56 . pp. 1371-1383.
Seshadri, L and Kumar, P (2024) Sliding Pressure Inventory Control of a Supercritical CO2 Cycle for Concentrated Solar Power-Analysis and Implications. In: Journal of Solar Energy Engineering, Transactions of the ASME, 146 (1). pp. 1-25.
Kumar, C and Kumar, P (2024) Analyzing dynamic strain aging and yield strength anomaly in IN740H, a nickel-based superalloy comprising low volume fraction of γ�. In: Materialia, 33 .
Duggirala, V and Hegde, VN and Reddy, V and Kumar, P and Muley, A (2024) CFD modeling of end effects of gas cooler heat exchanger for SCO2power blocks. In: ASME 2024 Heat Transfer Summer Conference, HT2024 collocated with the ASME 2024 Fluids Engineering Division Summer Meeting and the ASME 2024 18th International Conference on Energy Sustainability, 15 July 2024through 17 July 202, Anaheim.
Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 1 � Low magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .
Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 2- High magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .
Srivastava, A and Kumar, P and Ambirajan, A and Dutta, P and Varghese, Z and Rohith, BL and Subrahmanya, P (2024) Experimental investigation of thermosyphons with horizontal evaporator for low heat flux applications. In: Applied Thermal Engineering, 257 .
Goel, P and Pramanik, A and Jayaram, V and Banerjee, D and Kumar, P (2024) High-throughput estimation of transient creep response of a Ti6Al alloy using bending. In: Journal of Materials Research .
Duggirala, V and Hegde, VN and Reddy, V and Kumar, P (2024) MODELING OF METAL MATRIX CONCENTRATED SOLAR RECEIVERS FOR SCO2 POWER BLOCKS. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 24 June 2024 through 28 June 2024, London.
Nandi, A and Kumar, P and Chakrabartty, S and Thakur, CS (2024) Margin Propagation based Analog Soft-Gates for Probabilistic Computing. In: 37th International Conference on VLSI Design, VLSID 2024, 6 January 2024through 10 January 2024, Kolkata, West Bengal, pp. 378-383.
Hijazi, F and Pavan, AHV and Jayaram, V and Kumar, P (2024) Material volume reduction for creep testing using composite cantilevers and its application for residual life assessment. In: Materials Science and Engineering: A, 918 .
Kumar, C and Reddy, S and Eswaramoorthy, NK and Ravanappa, P and Chintapenta, V and Srinivasan, D and Kumar, P (2024) Microstructure optimization for improving creep resistance of additively manufactured Ni-based superalloy IN939 through heat treatment. In: Journal of Materials Science .
Kumar, P and Patra, A and Shivaleela, ES and Caligiuri, V and Krahne, R and De Luca, A and Srinivas, T (2024) Multi-solution inverse design in photonics using generative modeling. In: Journal of the Optical Society of America B: Optical Physics, 41 (2). A152-A160.
Hoque, SJ and Kumar, P and Gopi, PC (2024) Quasi-One-Dimensional Loss Model of Volute Using Boundary Layer Approach for Inward Flow Radial Supercritical CO2 Turbines. In: Journal of Engineering for Gas Turbines and Power, 146 (1).
Kumar, C and Pavan, AHV and Makineni, SK and Kumar, P (2024) Role of threshold stress in creep of IN740H, a γ�-lean Ni-based superalloy. In: Materials Science and Engineering: A, 903 .
Krishnakumar, VP and Das Mahapatra, A and Panwar, V and Mondal, A and Kumar, C and Kumar, P and Misra, A (2024) Semiconductor Nanoparticle Anchored Single-Walled Carbon Nanotubes for a Bolometer. In: Langmuir .
Patel, A and Prasad, KNV and Kumar, P and Narayanan, G (2024) Structural Analysis of Slitted Rotor for 10,000 rpm Switched Reluctance Machine. In: 3rd International Conference on Power, Control and Computing Technologies, ICPC2T 2024, 18 January 2024through 20 January 2024, Raipur, pp. 624-629.
Seshadri, L and Kumar, P (2024) VANELESS DIFFUSER MODELLING FOR REAL GAS SUPERCRITICAL CARBON DIOXIDE FLOWS- NEED FOR A DATA DRIVEN APPROACH. In: 69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 24 June 2024through 28 June 2024, London.
Shastri, V and Majumder, S and Ashok, A and Roy, K and Pratap, R and Kumar, P (2023) Electric current-assisted manipulation of liquid metals using a stylus at micro-and nano-scales. In: Nanotechnology, 34 (10).
Alpay, D and Bhattacharyya, T and Jindal, A and Kumar, P (2023) A dilation theoretic approach to approximation by inner functions. In: Bulletin of the London Mathematical Society, 55 (6). pp. 2840-2855.
Saha, BK and Chakraborty, B and Mondal, J and Pesyridis, A and Messini, EMB and Kumar, P (2023) Design and Implementation of a Control Strategy for a Dynamic Organic Rankine Cycle-Based Power System in the Context of Industrial Waste Heat Recovery. In: Energy Technology .
Das, BK and Kumar, P and Sau, H (2023) Determining sets for holomorphic functions on the symmetrized bidisk. In: Canadian Mathematical Bulletin, 66 (3). pp. 984-996.
Kulkarni, A and Srinivasan, D and Ravanappa, P and Jayaram, V and Kumar, P (2023) Creep behavior of additively manufactured high strength A205 aluminum alloy. In: Additive Manufacturing Letters, 6 .
Kumar, P and Mondal, PP (2023) Field dipole interaction and polarization effects in light-sheet optical fluorescence microscopy. In: Journal of Applied Physics, 133 (22).
Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2023) Experimental studies on LaNi4.25Al0.75 alloy for hydrogen and thermal energy storage applications. In: International Journal of Hydrogen Energy .
Hoque, SJ and Kumar, P and Dutta, P (2023) Concentrating solar powered transcritical co2 power generation cycle for the union territory of ladakh, india. In: International Journal of Energy for a Clean Environment, 24 (4). 17- 40.
Jagtap, P and Kumar, P (2023) Effect of electric field on mechanical behavior of vertically-aligned carbon nanotube structures. In: Proceedings of the Indian National Science Academy .
Gupta, P and Kumar, P and Rao, SMV (2023) Low-frequency unsteadiness of recompression shock structures in the diffuser of supersonic ejectors. In: Physics of Fluids, 35 (3).
Mishra, A and Rana, K and Kumar, P and Srinivas, T (2023) Mid Infrared Polarization Independent Tapered Waveguide Based Multianalyte Sensor – A Theoretical Study. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January - 2 February 2023, San Francisco.
Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .
Gupta, P and Rao, SMV and Kumar, P (2023) Performance evaluation of air ejectors using artificial neural network approach. In: Sadhana - Academy Proceedings in Engineering Sciences, 48 (2).
Kumar, P and Mishra, A and Mihr, F and Shivaleela, ES and Srinivas, T (2023) Polarization-independent dual-channel broadband wavelength demultiplexer design by Inverse method. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January 2023 - February 2023, San Francisco.
Geremew, FM and Kumar, P and Mishra, A and Talabattula, S (2023) Reconfigurable resonator based on five times self-coupled photonic waveguide for versatile functionalities. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January - 2 February 2023, San Francisco.
Paul, S and Kumar, P and Rao, SM (2023) Thermodynamic analysis on the effect of supercritical CO2 ejector in cogeneration cycle for dairy application. In: Thermal Science and Engineering Progress, 39 .
Goel, P and Kumar, P and Jayaram, V (2023) Estimation of stress redistribution for the extraction of power law creep parameters from bending. In: Mechanics of Materials, 177 .
Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.
Das, BK and Kumar, P and Sau, H (2023) DETERMINING SETS FOR HOLOMORPHIC FUNCTIONS ON THE SYMMETRIZED BIDISK. In: Canadian Mathematical Bulletin .
Hoque, SJ and Kumar, P and Gopi, PC (2023) Influence of Geometric Parameters for a 100 kW Inward Flow Radial Supercritical CO2 Turbine. In: Journal of Engineering for Gas Turbines and Power, 145 (1).
Kumar, P and Mihret, F and Mishra, A and Shivaleela, ES and Srinivas, T (2023) Inverse Design of SiN based Wavelength Demultiplexer. In: 2nd International Conference for Advancement in Technology, ICONAT 202, 24 - 26 January 2023, Goa.
Kumar, S and Mukherjee, A and Telpande, S and Mahapatra, AD and Kumar, P and Misra, A (2023) Role of the electrode-edge in optically sensitive three-dimensional carbon foam-MoS2 based high-performance micro-supercapacitors. In: Journal of Materials Chemistry A .
Kumaran, RS and Sharath, PP and Alone, DB and Kumar, P (2023) EVALUATION OF EMPIRICAL LOSS MODELS FOR BASE DRAG PREDICTION OF sCO2 AXIAL TURBINE AEROFOILS. In: UNSPECIFIED.
Lanjewar, S and Fenil, A and Kumar, P and Gopi, PC (2023) Influence of geometrical and operational parameters on the leakage flow of a radial labyrinth seal for application in inward flow radial supercritical CO2 turbine. In: UNSPECIFIED.
Ramakrishnan, RK and Mishra, A and Kumar, P and Kaushalram, A and Samad, SA and Hegde, G and Talabattula, S (2023) Integrated multi-mode waveguide devices for quantum communication. In: Journal of Optics (India) .
Fenil, A and Giri, G and Seshadri, L and Kumar, P and Nasser, A (2023) NUMERICAL ANALYSIS OF A SHROUDED CENTRIFUGAL COMPRESSOR FOR USE IN SUPERCRITICAL CARBONDIOXIDE (S-CO2) BRAYTON CYCLE. In: UNSPECIFIED.
Hoque, SJ and Kumar, P and Gopi, PC (2023) ONE DIMENSIONAL MODEL TO PREDICT THE TOTAL PRESSURE LOSS OF VOLUTE FOR INWARD FLOW RADIAL SUPERCRITICAL CO2 TURBINES. In: UNSPECIFIED.
Patel, A and Prasad, KNV and Biradar, V and Kumar, P and Narayanan, G (2023) Structural Analysis and Determination of Critical Speed of a 10,000 rpm Switched Reluctance Machine Rotor. In: 9th IEEE India International Conference on Power Electronics, IICPE 2023, 28 November 2023 through 30 November 2023, Sonipat.
Shenoy, P and Kumar, T (2023) A System for Regulation of Anxiety-based Symptoms. In: 2023 Global Conference on Information Technologies and Communications, GCITC 2023, 1 December 2023 - 3 December 2023, Karnataka.
Kumar, P and Sahana, D and Chandrashekar, LN and Jeyaseelan, A and Nayak, MM and Pratap, R and Pillai, G (2023) Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure. In: IEEE Sensors Letters, 7 (12). pp. 1-4.
Kumar, P and Mihret, F and Shivaleela, ES and Srinivas, T (2023) A compact 1 � 4 wavelength demultiplexer by Inverse Design. In: UNSPECIFIED, pp. 45-46.
Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.
Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Manipulating liquid metal flow for creating standalone structures with micro-and nano-scale features in a single step. In: Nanotechnology, 33 (45).
Kanjilal, A and Narayanan, PR and Agilan, M and Kumar, P (2022) Effect of Joint Size on Creep Behavior of Sn-Ag-Cu Solder-Cu Joints. In: Journal of Electronic Materials .
Jindal, A and Kumar, P (2022) Rational Penta-Inner Functions and the Distinguished Boundary of the Pentablock. In: Complex Analysis and Operator Theory, 16 (8).
Ahmad, SS and Verma, A and Mouli, T and Biradar, V and Narayanan, G and Kumar, P (2022) Experimental Investigations on 10,000-RPM Slitted-Rotor Switched Reluctance Machine. In: IEEE Energy Conversion Congress and Exposition (ECCE), 09 - 13 October 2022, Detroit.
Singh, SP and Jayaram, V and Srinivasan, D and Kumar, P (2022) High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy. In: Additive Manufacturing, 58 .
Hoque, SJ and Kumar, P and Gopi, PC (2022) Specific Speed Considerations for Inward Flow Radial Supercritical CO2 Turbines. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Seshadri, L and Patel, A and Biradar, V and Kumar, P and Gopi, PC (2022) Two Stage Radial Compressor for a Kilowatt Scale Supercritical Carbon Dioxide Power Block: Design Considerations. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Kumar, P and Saxena, A (2022) An improved Material Mask Overlay Strategy for the desired discreteness of pressure-loaded optimized topologies. In: Structural and Multidisciplinary Optimization, 65 (10).
Kumar, P and Mihret, F and Mishra, A and Shivaleela, ES and Srinivas, T (2022) Inverse Design of Multilayer Thin film by Deep Neural Network. In: 2022 International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2022, 12 - 16 September 2022, Turin, pp. 129-130.
Kumar, P and Mishra, A and Shivaleela, ES and Srinivas, T (2022) Inverse Design of SOI based broadband Grating Coupler. In: 5th IEEE Research and Applications of Photonics in Defense Conference, RAPID 2022, 12 - 14 September 2022, Miramar Beach.
Singh, SP and Rijal, A and Straub, T and Han, J-K and Kennerknecht, T and Eberl, C and Kawasaki, M and Kumar, P (2022) Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks. In: Materials Characterization, 190 .
Kassner, ME and Oros, T and Kumar, P (2022) Comments on the Mechanism of Detachment in Creep of Dispersion Strengthened Alloys at High Temperatures. In: Metals, 12 (7).
Hoque, SJ and Kumar, P and Gopi, PC (2022) INFLUENCE OF GEOMETRIC PARAMETERS FOR A 100 KW INWARD FLOW RADIAL SUPERCRITICAL CO2TURBINE. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Bhattacharyya, T and Kumar, P and Sau, H (2022) DISTINGUISHED VARIETIES THROUGH THE BERGER-COBURN-LEBOW THEOREM. In: Analysis and PDE, 15 (2). pp. 477-506.
Malleswararao, K and Aswin, N and Kumar, P and Dutta, P and Srinivasa Murthy, S (2022) Experiments on a novel metal hydride cartridge for hydrogen storage and low temperature thermal storage. In: International Journal of Hydrogen Energy, 47 (36). pp. 16144-16155.
Kumar, P (2022) HoneyTop90: A 90-line MATLAB code for topology optimization using honeycomb tessellation. In: Optimization and Engineering .
Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Spontaneous Formation of Structures with Micro- and Nano-Scopic Periodic Ripple Patterns. In: ACS Omega, 7 (14). pp. 12111-12119.
Kumar, P (2022) Topology optimization of stiff structures under self-weight for given volume using a smooth Heaviside function. In: Structural and Multidisciplinary Optimization, 65 (4).
Kumar, P and Zhu, K and Gao, X and Wang, S-D and Lanza, M and Thakur, CS (2022) Hybrid architecture based on two-dimensional memristor crossbar array and CMOS integrated circuit for edge computing. In: npj 2D Materials and Applications, 6 (1).
Kumar, P and Joshi, P and Basumatary, J and Mondal, PP (2022) Light sheet based volume flow cytometry (VFC) for rapid volume reconstruction and parameter estimation on the go. In: Scientific Reports, 12 (1).
Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .
Kanjilal, A and P, RN and Kumar, P (2022) Size dependent creep deformation of elastically constrained compliant metallic joints. In: Materialia, 21 .
Sathish, S and Kumar, P (2021) Equation of state based analytical formulation for optimization of sCO2 Brayton cycle. In: Journal of Supercritical Fluids, 177 .
Kumar, S and Abraham, E and Kumar, P and Pratap, R (2021) Introducing Water Electrolithography. In: ACS Omega, 6 (39). pp. 25692-25701.
Sunder, R and Raut, D and Jayaram, V and Kumar, P and Shastri, V (2021) Near-tip residual stress as an independent load interaction mechanism. In: International Journal of Fatigue, 151 .
Kalkal, A and Kumar, S and Kumar, P and Pradhan, R and Willander, M and Packirisamy, G and Kumar, S and Malhotra, BD (2021) Recent advances in 3D printing technologies for wearable (bio)sensors. In: Additive Manufacturing, 46 .
Sarkar, A and Suresh, KA and Kumar, P and Jayaraman, N (2021) Strain rate and temperature dependence of collapse pressure in Langmuir monolayer of cholesteryl dimers. In: Thin Solid Films, 735 .
Kumar, P and Kedaria, D and Mahapatra, C and Mohandas, M and Chatterjee, K (2021) A designer cell culture insert with a nanofibrous membrane toward engineering an epithelial tissue model validated by cellular nanomechanics. In: Nanoscale Advances, 3 (16). pp. 4714-4725.
Lal, D and Kumar, P and Bathe, R and Sampath, S and Jayaram, V (2021) Effect of microstructure on fracture behavior of freestanding plasma sprayed 7 wt.% Y2O3 stabilized ZrO2. In: Journal of the European Ceramic Society, 41 (7). pp. 4294-4301.
Sonawane, D and Kumar, P (2021) Stability of Cu-islands formed on Si substrate via 'dewetting' under subsequent thermal cycling. In: Nanotechnology, 32 (19).
Kumar, P and Langelaar, M (2021) On topology optimization of design-dependent pressure-loaded three-dimensional structures and compliant mechanisms. In: International Journal for Numerical Methods in Engineering, 122 (17). p. 4787.
Joglekar, A and Gurrala, G and Kumar, P and Joseph, FC and Kiran, TS and Sahasranand, KR and Tyagi, H (2021) Open-Source Heterogeneous Constrained Edge-Computing Platform for Smart Grid Measurements. In: IEEE Transactions on Instrumentation and Measurement, 70 .
Kumar, P and Seema, Seema and Gupta, M and Avasthi, S (2021) Fully dense, highly conductive nanocrystalline TiN diffusion barrier on steel via reactive high power impulse magnetron sputtering. In: Thin Solid Films, 722 .
Sathish, S and Kumar, P and Nassar, A (2021) Analysis of a 10 MW recompression supercritical carbon dioxide cycle for tropical climatic conditions. In: Applied Thermal Engineering, 186 .
Prasad, KNV and Patel, A and Biradar, V and Ahmad, SS and Kumar, P and Narayanan, G (2021) Bearing Selection for High-Speed Electrical Machine. In: 2021 National Power Electronics Conference, 15-17 Dec 2021, Bhubaneswar.
Guntanur, R and Patel, A and Biradar, V and Kumar, P (2021) COUPLED THERMAL-STRUCTURAL ANALYSIS of GENERATOR for sCO2 TURBOMACHINERY. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-03 Dec 2021, Virtual, Online.
Kavil, SP and Bala, PR and Ghosh, D and Kumar, P and Sukumar, R (2021) Climate Change and the Migration of a Pastoralist People c. 3500 cal. Years BP Inferred from Palaeofire and Lipid Biomarker Records in the Montane Western Ghats, India. In: Environmental Archaeology .
Patel, A and Biradar, V and Kumar, P (2021) HARMONIC ANALYSIS of the HIGH SPEED DIRECT COUPLED SCO2 TURBOGENERATOR. In: ASME 2021 Gas Turbine India Conference, 2-3 Dec 2021, Virtual, Online.
Kumaran, RS and Alone, DB and Nassar, A and Kumar, P (2021) PRELIMINARY AERODYNAMIC DESIGN of A S-CO2 AXIAL TURBINE. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-3 Dec 2021, Virtual, Online.
Hoque, SJ and Kumar, P (2021) THEORETICAL ESTIMATION of MINIMUM and MAXIMUM ALLOWABLE ROTATIONAL SPEED of SUPERCRITICAL CO2 INWARD FLOW RADIAL TURBINE. In: ASME 2021 Gas Turbine India Conference, 2-3 Dec 2021, Virtual, Online.
Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.
Kumar, P and Jithin, MA and Mohan, S and Avasthi, S (2020) Hundred-fold reduction in Iron diffusivity in titanium nitride diffusion barrier on steel by microstructure engineering. In: Thin Solid Films, 716 .
Kumar, K and Gupta, HK and Kumar, P (2020) Analysis of a hybrid transcritical CO2 vapor compression and vapor ejector refrigeration system. In: Applied Thermal Engineering, 181 .
Sonawane, D and Kumar, P (2020) New insights into fracture of Si in Cu-filled through silicon via during and after thermal annealing. In: Engineering Fracture Mechanics, 238 .
Somaiah, N and Kumar, P (2020) Effect of Thermomigration–Electromigration Coupling on Mass Transport in Cu Thin Films. In: Journal of Electronic Materials, 49 (1). pp. 96-108.
Mihret, F and Kumar, P and Srinivas, T (2020) Hybrid Photonic Beamforming for 5G Downlink Millimeter Wave MIMO Communication. In: Proceedings of CONECCT 2020 - 6th IEEE International Conference on Electronics, Computing and Communication Technologies, 2 - 4 July 2020, Bangalore.
Sonawane, D and Ramamurthy, PC and Kumar, P (2020) Mechanical Reliability of Photovoltaic Cells under Cyclic Thermal Loading. In: Journal of Electronic Materials, 49 (1). pp. 59-71.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.
Jagtap, P and Kumar, P (2020) Whisker Growth in Sn Coatings: A Review of Current Status and Future Prospects. In: Journal of Electronic Materials . (In Press)
Singh, SP and Kumar, P and Kassner, ME (2020) The low-stress and high-temperature creep in LiF single crystals: An explanation for the So-called Harper-Dorn creep. In: Materialia, 13 .
Agrawal, P and Kumar, H and Kumar, P (2020) Rapid and even spreading of complex fluids over a large area in porous substrates. In: Applied Physics Letters, 117 (7).
Kumar, S and Telpande, S and Manikandan, V and Kumar, P and Misra, A (2020) Novel electrode geometry for high performance CF/Fe2O3based planar solid state micro-electrochemical capacitors. In: Nanoscale, 12 (37). pp. 19438-19449.
Ghosh, R and Telpande, S and Gowda, P and Reddy, SK and Kumar, P and Misra, A (2020) Deterministic Role of Carbon Nanotube-Substrate Coupling for Ultrahigh Actuation in Bilayer Electrothermal Actuators. In: ACS Applied Materials and Interfaces, 12 (26). pp. 29959-29970.
Rijal, A and Singh, SP and Han, J-K and Kawasaki, M and Kumar, P (2020) Effect of High-Pressure Torsion on Hardness and Electrical Resistivity of Commercially Pure Cu. In: Advanced Engineering Materials, 22 (1).
Sharma, M and Kumar, P and Irzhak, AV and Kumar, S and Pratap, R and von Gratovski, SV and Shavrov, VG and Koledov, VV (2020) Melting and Electromigration in Thin Chromium Films. In: Physics of the Solid State, 62 (6). pp. 988-992.
Tan, P and Kumar, P and Dutta, I (2020) A cutting mechanism map for machining metallic sheets using electric current pulses. In: Engineering Research Express, 2 (2).
Sonawane, D and Choudhury, A and Kumar, P (2020) New Insights into Dewetting of Cu Thin Films Deposited on Si. In: Langmuir, 36 (20). pp. 5534-5545.
Kanjilal, A and Kumar, P (2020) Insights into growth behavior of intermetallic compounds in Sn-Ag-Cu solder joints during mechanical and thermo-mechanical deformation processes. In: 2019 IEEE 21st Electronics Packaging Technology Conference, EPTC 2019, 4-6 Dec. 2019, Marina Bay Sands Convention Centre, Singapore, pp. 48-52.
Sharma, D and Dutta, I and Kumar, P (2020) A technique for machining thin metallic foils using electromagnetic mechanical pulsed loading. In: Engineering Research Express, 2 (1).
Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.
Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.
Ginley, D and Aswathi, R and Atchuta, SR and Basu, B and Basu, S and Christian, JM and Dan, A and Dani, N and Das, R N and Dutta, P and Flueckiger, SM and Garimella, SV and Goswami, Y and Ho, CK and Kedare, S and Khivsara, SD and Kumar, P and Madhusoodana, CD and Mallikarjun, B and Mira-Hernández, C and Orosz, M and Ortega, JD and Parida, DR and Prasad, MS and Ramesh, K and Advaith, S and Saha, SK and Sakthivel, S and Sharma, S and Singh, P and Singh, S and Srikanth, O and Srinivasan, V and Weibel, JA and Wendelin, T (2020) Multiscale Concentrated Solar Power. [Book Chapter]
Sharma, M and Kumar, S and Pratap, R and Irzhak, A and Kumar, P and Von Gratowski, S and Koledov, V and Lega, P and Shavrov, V (2020) Electric current driven formation of micro-and nano-sized beads in thin Cr films. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8 August 2019, Zhenjiang; China, pp. 86-89.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.
Kumar, S and Suresh, H and Sethuraman, VA and Kumar, P and Pratap, R (2020) Electric field induced patterning in Cr film under ambient conditions: AÂ chemical reaction based perspective. In: SN Applied Sciences, 2 (12).
Senthil Kumaran, R and Alone, DB and Kumar, P (2020) Profile loss investigations with a S-CO2 axial turbine aerofoil. In: ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020, 21-25 Sept 2020, Virtual, Online.
Patel, A and Balasubramanian, AK and Biradar, V and Srivatsa, S and Kumar, P and Sonti, VR (2019) Analysis of aerostatic thrust bearing for S-CO2 turbomachinery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Rijal, A and Singh, SP and Han, JK and Kawasaki, M and Kumar, P (2019) Effect of HPT processing followed by long term natural ageing on mechanical and electrical properties of commercially pure cu. In: Letters on Materials, 9 (4 Spec). pp. 561-565.
Sonawane, D and Kumar, P (2019) Effect of accelerated thermal cyclic loading on structural reliability of cu-filled TSV. In: 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC), 4-6 Dec. 2019, Singapore, Singapore, pp. 1-5.
Singh, SP and Huang, X-R and Kumar, P and Kassner, ME (2019) Short communication: Assessment of the dislocation density using X-ray topography in Al single crystals annealed for long times near the melting temperature. In: Materials Today Communications, 21 .
Kumar, P and Nair, AR and Chatterjee, O and Paul, T and Ghosh, A and Chakrabartty, S and Thakur, CS (2019) Neuromorphic In-Memory Computing Framework using Memtransistor Cross-bar based Support Vector Machines. In: 62nd IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2019, 4 - 7 August 2019, Dallas, pp. 311-314.
Von Gratowski, S and Nagaraja, VS and Nithya, G and Kumar, P and Wang, Z and Li, L and Song, Z and Irzhak, A and Lega, P and Frolov, A and Orlov, A and Koledov, V (2019) Study of the sticking effects during mechanical nano-manipulation using shape memory nanotools. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale,, 4 - 8 August 2019, Zhenjiang, China, pp. 130-133.
Talukder, S and Gogoi, B and Kumar, P and Pratap, R and Maoz, R and Sagiv, J (2019) Advanced nanopatterning using scanning probe technology. In: 2017 International Conference on Nanotechnology: Ideas, Innovations and Initiatives, ICN:3i 2017, 6 - 8 December 2017, Roorkee, pp. 740-743.
Maiya, MP and Kumar, K and Hafner, A and Banasiak, K and Neksa, P and Kumar, P and Singh, S (2019) Experimental analysis of transcritical CO2 booster refrigeration system with heat recovery and ejector expansion. In: 25th IIR International Congress of Refrigeration, ICR 2019, 24 August 2019 - 30 August 2019, Montreal, pp. 1467-1474.
Irzhak, A and Koledov, V and Zhuravleva, T and Kumar, P (2019) Melting of metall nano particles for nanoassembling. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8, August 2019, Zhenjiang; China, pp. 78-81.
Seshadri, L and Giri, G and Setty, R and Sathish, S and Nassar, A and Gopi, PC and Kumar, P and Moroz, L and Namburi, AN (2019) Design of 20 kW turbomachinery for closed loop supercritical carbon dioxide Brayton test loop facility. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.
Dutta, A and Gupta, A and Sathish, S and Bandooni, A and Kumar, P (2019) Simple recuperated S-CO2 cycle revisited: Optimization of operating parameters for maximum cycle efficiency. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.
Narchail, S and Urabinahatti, C and Srivatsa, S and Patel, A and Ahmad, SS and Kumar, P and Narayanan, G (2019) Experimental Investigations on a High-Speed Rotor for a Switched Reluctance Machine. In: 8th IEEE India International Conference on Power Electronics, IICPE 2018, 13-15 December 2018, Jaipur.
Gupta, S and Kumar, P and Kumar, K and Chakraborty, S and Thakur, CS (2019) Low power neuromorphic analog system based on sub-threshold current mode circuits. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.
Sharma, R and Gupta, S and Kumar, K and Kumar, P and Thakur, CS (2019) Real-time image segmentation using neuromorphic pixel array. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.
Kumar, K and Kumar, P (2019) Analysis of Propane + CO2 mixture as a working fluid in a vapor compression refrigeration system. In: 8th Conference on Ammonia and CO2 Refrigeration Technologies, Ohrid 2019, 11 - 13 April 2019, Ohrid, pp. 319-326.
Sharma, D and Kumar, P (2019) Failure of thin metallic conductors under electric current loading: Transition from sharp crack to blow-hole. In: Engineering Fracture Mechanics, 208 . pp. 221-237.
Choudhury, K and Singh, RK and Kumar, P and Ranjan, M and Srivastava, A and Kumar, A (2019) Effect of confined geometry on the size distribution of nanoparticles produced by laser ablation in liquid medium. In: Nano-Structures and Nano-Objects, 17 . pp. 129-137.
Sathish, S and Kumar, P and Nagarathinam, L and Swami, L and Namburi, AN and Bandarupalli, VS and Gopi, PC (2019) Brayton cycle supercritical CO2 power block for industrial waste heat recovery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Pandey, V and Seshadri, L and Gupta, J and Mariayyah, R and Santhosh, NL and Kumar, P (2019) Modelling of gas cooler for S-CO2 Brayton power cycle. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Seshadri, L and Raja, HN and Kumar, P and Nassar, A and Giri, G and Moroz, L (2019) Supercritical carbon dioxide turbomachinery options for kilowatt to gigawatt level power generation. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Narchail, S and Ahmad, SS and Srivatsa, S and Kumar, P and Narayanan, G (2019) Experimental Vibration Studies on a Solid-Rotor Switched Reluctance Machine. In: 2019 National Power Electronics Conference (NPEC), 13-15 Dec. 2019, Tiruchirappalli, India.
Kumar, S and Abraham, E and Talukder, S and Kumar, P and Pratap, R (2018) Micro Electrolithography System Development. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.
Kumar, S and Kumar, P and Kumari, K and Avasthi, S (2018) Optimization of controlled two-step liquid phase crystallization of Ge-on-Si. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.
Kumar, P and Arvind, JM and Mohan, S and Avasthi, S (2018) SIMS characterization of TiN diffusion barrier layer on steel substrate. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.
Somaiah, N and Kumar, P (2018) Tuning electromigration-thermomigration coupling in Cu/W Blech structures. In: Journal of Applied Physics, 124 (18).
Pandey, V and Kumar, P (2018) Thermal resistance network model for a recuperator in S-CO2 power cycle. In: 16th International Heat Transfer Conference, IHTC 2018, 10 - 15 August 2018, Beijing, China, pp. 4919-4930.
Sharma, D and Kumar, P (2017) Synergistic effect of electromagnetic force on fracture behavior of pre-cracked thin metallic structures. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 407-408.
Kumar, P and Kawasaki, M and Langdon, TG (2017) Resolving the strength-ductility paradox through severe plastic deformation of a cast Al-7 Si alloy. In: 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, 29 - 3 June 2016, Graz, pp. 1043-1048.
Paul, A and Kumar, P and Surolia, A and Vijayan, M (2017) Biochemical and structural studies of mutants indicate concerted movement of the dimer interface and ligand-binding region of Mycobacterium tuberculosis pantothenate kinase. In: ACTA CRYSTALLOGRAPHICA SECTION F-STRUCTURAL BIOLOGY COMMUNICATIONS, 73 (11). pp. 635-643.
Smith, K K and Kassner, M E and Kumar, P (2017) Long-term annealing of high purity aluminum single crystals: New insights into Harper-Dorn creep. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 705 . pp. 1-5.
Kumar, P and Dutta, I (2017) Response to ``Comment on `Electric current induced flow of liquid metals: Mechanisms and substrate-surface effects''' J. Appl. Phys. 121, 136102 (2017)]. In: JOURNAL OF APPLIED PHYSICS, 121 (13).
Sanyal, A and Basu, S and Kumar, P (2014) Adsorption study of silica gel particle for improvement in design of adsorption beds used in solar driven cooling units. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 656-665.
Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.
Talebanpour, B and Sahaym, U and Dutta, I and Kumar, P (2014) EFFECT OF AGING ON IMPRESSION CREEP BEHAVIOR OF Pb-FREE SOLDERS. In: ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, JUL 16-18, 2013, Burlingame, CA.
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Effects of Microstructure and Loading on Fracture of Sn-3.8Ag-0.7Cu Joints on Cu Substrates with ENIG Surface Finish. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (12). pp. 4485-4496.
Kumar, P and Howarth, J and Dutta, I (2014) Electric current induced flow of liquid metals: Mechanism and substrate-surface effects. In: JOURNAL OF APPLIED PHYSICS, 115 (4).
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (1). pp. 88-95.
Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.
Huang, Z and Kumar, P and Dutta, I and Pang, JHL and Sidhu, R (2014) A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks. In: ENGINEERING FRACTURE MECHANICS, 131 . pp. 9-25.
Kumar, P and Sriprakash, G and Rukmani, K and Ramesh, KP and Muthu, DVS (2013) Anomalous optical phonons in Cs-0.9(NH4)(0.1)H2AsO4: a temperature-dependent Raman study. In: AIP Advances, 3 (6). 062123_1-062123_7.
Kumar, P and Mishra, A and Watt, T and Watt, I and Bourell, DL and Sahaym, U (2013) Electromagnetic jigsaw: metal-cutting by combining electromagnetic and mechanical Forces. In: PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 6 . pp. 600-604.
Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.
Kumar, P and Talenbanpour, B and Sahaym, U and Wen, CH and Dutta, I (2012) Microstructural Evolution and Some Unusual Effects During Thermo-Mechanical Cycling of Sn-Ag-Cu Alloys. In: 13th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) , MAY 30-JUN 01, 2012 , San Diego, CA , pp. 880-887.
