|
 | Up a level |
Athokpam, S and Jeevan Fernandes, B and Ramesh, KP and Mallikarjunaiah, KJ (2023) Effect of the zinc substitution on the physical and optical properties of tellurium vanadate glasses. In: International Conference on Applied Research in Engineering Sciences, ICARES 2022, 24 November 2022, Bengaluru, pp. 113-118.
Ningayya Patil, P and Kumar, S and Jali, VM and Sahoo, B (2023) Low temperature and high magnetic field Mössbauer study of CuFe2O4synthesized by sol-gel auto-combustion method. In: 2022 International Conference on Applied Research in Engineering Sciences, 24-25 November 2022, Bengaluru, pp. 68-74.
Manobalan, S and Bose, S and Sumangala, TP (2023) Effect of thickness on the EMI shielding effectiveness of epoxy composites with cobalt ferrite and graphene. In: 2nd International Conference on Future Technologies in Manufacturing, Automation, Design and Energy, 14-16 December 2022, Thiruvettakudy, pp. 128-132.
Kumara, GD and Sivapullaiah, PV and Sreenivasa Murthy, A (2022) Performance evaluation of sugar cane bagasse ash on the strength of concrete: A sustainable approach. In: Materials Today: Proceedings .
Nayak, R and Miglani, Y and Bhardwaj, S (2022) Synthesis and characterization of ferroelectric Barium strontium titanate Ceramics. In: Materials Today: Proceedings .
Jithin, MA and Sidhila, PS and Udayashankar, NK (2022) Pulse frequency effect on the NiTi plasmas characteristics and thin film properties and fabrication of NiTi micro-comb structures. In: Materials Today: Proceedings .
Hegde, SS and Talapatadur, Vijaya and Vinoth, S and Priyanka, VP and Murahari, Prashantha and Ramesh, K (2022) Facile synthesis of cubic SnS/rGO nanocomposites: Structural, optical, and photocatalytic properties. In: Materials Today: Proceedings . ISSN 22147853
Hegde, SS and Jeevan Fernandes, B and Talapatadur, V and Ramesh, KP and Ramesh, K (2022) Impedance spectroscopy analysis of SnS chalcogenide semiconductors. In: Materials Today: Proceedings .
Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Kailas, SV and Suvin, PS (2022) Wetting behaviour of a Green cutting fluid (GCF); influence of surface roughness and surface energy of AA5052, Ti6Al4V and EN31. In: Materials Today: Proceedings .
K, AK and Kapilan, N and Dinesh, PA and Kasthurirengan, S (2022) Experimental studies on solar assisted activated carbon based adsorption refrigeration system. In: Materials Today: Proceedings .
Naveen Kumar, K and Shaik, H and Pawar, A and Chandrashekar, LN and Sattar, SA and Nithya, G and Imran Jafri, R and Madhavi, V and Gupta, J and Ashok Reddy, GV (2022) Effect of annealing and oxygen partial pressure on the RF sputtered WO3 thin films for electrochromic applications. In: Materials Today: Proceedings, 59 . pp. 339-344.
Naveen Kumar, K and Shaik, H and Chandrashekar, LN and Aishwarya, P and Abdul Sattar, S and Nithya, G and Madhavi, V and Imran Jafri, R and Gupta, J and Ashok Reddy, GV (2022) On ion transport during the electrochemical reaction on plane and GLAD deposited WO3 thin films. In: Materials Today: Proceedings, 59 . pp. 275-282.
Hegde, SS and Surendra, BS and Priyanka, VP and Murahari, P and Ramesh, K (2021) SnS/LDPE Composite: A reusable floating photocatalyst for solar degradation of organic dyes. In: 2021 International Conference on Futuristic Research in Engineering Smart Materials, FRESM 2021, 23 - 24 April 2021, Bengaluru, pp. 4255-4261.
Dey, N (2021) Perylene diimide-based fluorescent nanoassembly for sequential recognition of Fe3+and inorganic phosphate in the aqueous medium. In: 2021 International Conference on Materials and Technologies, Material TECH 2021, 9-10 Jan 2021, Raipur; India, pp. 2952-2956.
Nagaraja, M and Prashanth, S and Pattar, J and Mahesh, HM and Rajanna, K (2021) Polyaniline-CuO nanocomposite: Electrical, structural and sensor properties. In: 2021 Global Conference on Recent Advances in Sustainable Materials, 29-30 Jul 2021, Mangalore, pp. 1989-1992.
Thapliyal, P and Kandari, AS and Lingwal, V and Panwar, NS and Rao, GM (2020) Post deposition annealing dependent structural and C-V characteristics of (Ta2O5)0.965-(TiO2)0.035thin films. In: Materials Today: Proceedings, 5- 6 November 2020, Jaipur, pp. 3946-3950.
Yellareswara Rao, K and Narasimham, S and Narayan, K and Mohan Rao, G (2020) Investigations on sputter deposited lithium nickel manganese oxide thin film cathodes for micro battery applications. In: Materials Today: Proceedings, 19 January - 1 February 2020, Chennai, S28-S34.
Babu, PN and Gargeya, BSK and Ray, BC and Pal, S (2020) Atomistic investigation of mechanical behavior for CNT reinforced nanocrystalline aluminum under biaxial tensile loading. In: Materials Today: Proceedings, 15 - 17 December 2020, Indore, pp. 4942-4950.
Logeshwari, J and Sivapullaiah, PV (2020) Physical, chemical, morphological and strength characteristics of steel slags in view of its potential application in geotechnical engineering. In: Materials Today: Proceedings, 22 April 2020, Kancheepuram, Tamilnadu, pp. 6282-6286.
Manasa, AM and Deepu, BR and Savitha, P (2020) Composition tailored isotropic and anisotropic wet etching of glass. In: 2nd International Conference on Recent Advances in Materials and Manufacturing, ICRAMM 2020, 20 - 21 November 2020, Tamil Nadu, pp. 1270-1273.
Deepu, BR and Venkatachalam, P and Mirji, FN and Littin, V and Naveen, H and Savitha, P and Basavaraju, YB (2020) A Surface Micromachining: HNA Etchant for Stiction-free Release of Micro/Nanomechanical Structures. In: Materials Today: Proceedings, 42 . pp. 1218-1223.
Kumar, S and Avinash, G and Vimal, E (2020) Ductility effect on clinching joint strength in lap-shear configuration loading. In: 2nd International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing, IMME 2019, 27 - 28 December 2019, Tamil Nadu, pp. 1667-1672.
Rao, MVP and Raj, D and Harursampath, D and Renji, K (2020) Estimation of material properties of Metal Matrix Composites using Finite Element Method in the presence of micromechanics damages. In: 6th International Conference on Recent Advances in Composite Materials, ICRACM 2019, 25-28, February 2019, Varanasi, pp. 1135-1143.
Chaturvedi, R and Trikha, M and Simha, KRY (2020) Impact Penetration through Spacecraft Honeycomb panels Analytical, Numerical and Experimental Study. In: 6th International Conference on Recent Advances in Composite Materials, 25 - 28 February 2019, Varanasi; India, pp. 1050-1058.
Jairaja, R and Naik, GN (2020) Numerical studies on weak bond effects in single and dual adhesive bonded single lap joint between CFRP and aluminium. In: 6th International Conference on Recent Advances in Composite Materials, ICRACM 2019, 25 February 2019, Varanasi, pp. 1064-1068.
Rahaman, S and Anantha Sunil, M and Kumar Singha, M and Ghosh, K (2020) Studies of ultrasonically sprayed Cu2SnS3thin films by varying Sn concentration. In: International Conference on Nanoelectronics, Nanophotonics, Nanomaterials, Nanobioscience & Nanotechnology, 5NANO 2020, 23-24 April 2020, Kottayam, Kerala, pp. 3938-3941.
Gargeya, BSK and Kumar, S and Ray, BC and Pal, S (2020) Study of debonding phenomena at interface and its implication on mechanical behaviour of epoxy-CNT nano-composite using molecular dynamics simulation. In: 6th International Conference on Recent Advances in Composite Materials, ICRACM 2019, 25-28 February 2019, Varanasi, pp. 1111-1115.
Srinivasa, HT and Palakshamurthy, BS and Venkatesha, MA (2019) Thermal/photophysical properties of cyanobiphenyl based unsymmetrical molecules: Synthesis and evaluation. In: Materials Today: Proceedings, 17 . pp. 41-50.
Venkatesh, R and Banapurmath, NR and Ramesh, K and Venkatesh, A and Khandake, SA and Kurade, PR and Modagi, SM and Nitin, MN and Shettar, AS (2019) Enhancement of open circuit voltage of CdTe solar cell. In: 1st International Conference on Recent Advances in Materials and Manufacturing ICRAMM 2019, 12 September 2019, Karnataka, India, pp. 117-119.
Talukder, S and Gogoi, B and Kumar, P and Pratap, R and Maoz, R and Sagiv, J (2019) Advanced nanopatterning using scanning probe technology. In: 2017 International Conference on Nanotechnology: Ideas, Innovations and Initiatives, ICN:3i 2017, 6 - 8 December 2017, Roorkee, pp. 740-743.
Chakraborty, S and Patra, N and Mishra, A and Chaterjee, S (2019) Development and characterization of novel piezoceramic material based stack actuator. In: nternational Conference on Advances in Materials and Manufacturing Applications, 29-31 Aug 2019, Bengaluru, pp. 4515-4519.
Suma, MN and Prasad, MVN and Gaddam, V and Rajanna, K and Nayak, MM (2019) Effect of Process Duration on ZnO Nanowire Growth & Application for Pressure Sensing. In: 2019 International Multi-Conference on Computing, Communication, Electrical and Nanotechnology, I2CN-2K, 25-26, April 2019, India, pp. 1713-1719.
Anil Kumar, KS and Rajneesh, H and Madhu, HC (2019) Effect of SiC nano particles on grain stability of friction stir processed AA7075. In: 2019 International Conference on Materials and Manufacturing Methods, MMM 2019, 5-7 July 2019, Tiruchirapalli; India, pp. 2586-2590.
Sathiaraj, GD and Kalsar, R and Kumar, SSS and Suwas, S and Skrotzki, W (2019) Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy. In: 2019 International Conference on Materials and Manufacturing Methods, MMM 2019, 5-7 July 2019, Tiruchirapalli; India, pp. 2147-2151.
Rama Sateesh, KV and Kumar Harursampath, D (2019) Impact damage of hemispherical shells formed by direct metal laser sintering. In: 2nd International Conference on Materials Manufacturing and Modelling, ICMMM 2019, 29-31 March 2019, VIT University Vellore; India, pp. 2983-2989.
Santhy, K and Vamsi, KV and Karthikeyan, S (2019) Modelling of Ni3(Ti,V) system through first-principle calculations. In: 10th International Conference of Materials Processing and Characterization, ICMPC 2020, 21-23, February 2020, India, pp. 278-281.
Vignesh, R and Arjun Kumar, B and Muthuvinayagam, A and Elangovan, T and Kaviyarasu, K and Theophil Anand, G and Ramalingam, G (2019) Unstable cell efficiency in CdS quantum dot sensitized solar cell using low cost lugols iodine aqueous electrolyte. In: 2018 NANOSMATAFRICA 2018, 19-23 Nov 2018, CapeTown; South Africa, pp. 159-162.
Jeevan Fernandes, B and Munga, P and Ramesh, K and Udayashankar, NK (2018) Electrical switching and thermal behavior of ternary Si15Te85-xBix (0 ≤ x ≤ 2) chalcogenide glasses. In: 2016 International Conference on Smart Engineering Materials, ICSEM 2016, 20 - 22 October 2016, Bengaluru, Karnataka, pp. 21292-21298.
Gaddam, V and Neella, N and Nayak, MM and Rajanna, K (2018) Al:ZnO nanosheets on flexible stainless steel substrate as impact sensor. In: 2nd International Conference on Large Area Flexible Microelectronics, ILAFM 2016, 20 - 22 December 2016, Bengaluru, pp. 10779-10786.
Goveas, LR and Anuradha, KN and Bhat, SV (2018) Grain size effect on the magnetic properties of Sm0.08Ca0.92MnO3 manganite. In: 2nd International Conference on Large Area Flexible Microelectronics, ILAFM 2016, 20 - 22 December 2016, Bengaluru, pp. 10747-10754.
Mishra, J and Agarwal, J and Kasthurirengan, S and Mukherjee, S and Nayak, P and Panchal, P and Gangradey, R (2018) Adsorption characteristic study of activated carbons down to 4.5 k. In: 7th International Conference of Materials Processing and Characterization, ICMPC 2017, 17 - 19 March 2017, Hyderabad, Andhra Pradesh, pp. 3425-3431.
Arunkumar, KN and Krishnappa, GB and Kasturirengan, S and Laxman, BR (2018) An Experimental Investigation on Tensile and Compression BehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment. In: International Conference on Processing of Materials, Minerals and Energy, 2016, July 29th – 30th, 2016, Ongole, Andhra Pradesh, India, pp. 904-910.
Eskandari-Naddaf, H and Muralidhara, S and Raghu Prasad, BK and Venkatarama Reddy, BV and Pakzad, A (2018) PROPERTIES of SCC in GREEN and GREY STATE. In: 7th International Conference of Materials Processing and Characterization, ICMPC 2017, 17 - 19 March 2017, Hyderabad, Andhra Pradesh, pp. 3503-3512.
Arunkumar, KN and Krishnappa, GB and Kasthurirengan, S and Vinay, P (2018) An Experimental Investigation on Hardness and ShearBehaviorofAluminum, Silicon Carbide, and GraphiteHybrid Composite with and without Cryogenic Treatment. In: International Conference on Processing of Materials, Minerals and Energy, July 29th – 30th, 2016,, Ongole, Andhra Pradesh, India, pp. 916-921.
Shaik, H and Sheik, AS and Rachith, SN and Rao, GM (2018) Microstructure Dependent Opto-Electronic Properties of Amorphous Hydrogenated Silicon Thin Films. In: International Conference on Advanced Materials and Applications (ICAMA) 2016, June 15 - 17, 2016, Bengaluru, Karanataka, INDIA, pp. 2527-2533.
Biswakarma, D and Dey, N and Bhagat, D and Bhattacharya, S (2018) A fluorescent supramolecular host for urea. In: 2018 International Conference on Nano Science and Engineering Application, ICONSEA 2018, 4-6 October 2018, Andhra Pradesh; India, pp. 11-16.
