Browse by Journal / Conference

Majumder, S and Sivakumar, G and Jayaram, V and Srinivasan, D (2024) Oxidation behaviour and thermal cycling response of HVAF and HVA(O)F NiCoCrAlY coatings. In: Journal of Materials Science .

Saure, LM and Lumma, J and Kohlmann, N and Hartig, T and Teotonio, EES and Shetty, S and Ravishankar, N and Kienle, L and Faupel, F and Schröder, S and Adelung, R and Terraschke, H and Schütt, F (2024) Functional light diffusers based on hybrid CsPbBr3/SiO2 aero-framework structures for laser light illumination and conversion. In: Journal of Materials Science, 59 (37). 17382- 17393.

Kumar, H and Meher, S and Palanisamy, D and Banerjee, R and Kumar, S and Mondol, S and Makineni, SK (2024) Design of high strength Al�Cu based alloy by minor addition of Hf and Zr. In: Journal of Materials Science .

Shukla, N and Sinha, SK and Munir, B and Srishilan, C and Srivastava, C and Sarkar, S (2024) Designing scheme of compositionally tuned high-strength and high-conductive copper alloy: a systematic phase transformation study. In: Journal of Materials Science .

Mondal, S and Raghavendra, KG and Panigrahi, A and Nayan, N and Makineni, SK and Suwas, S (2024) Effect of Sc addition on evolution of microstructure, texture and strength of high-pressure torsion-processed AA2195 Al�Li alloy. In: Journal of Materials Science, 59 (14). pp. 5717-5735.

Legese, SS and Chandravanshi, D and Gadhavajhala, SSS and Pal, V and Serbesa, AT and Srinivasan, B and Olu, FE and Tiwary, CS (2024) Effect of cooling rate on the microstructure and thermal conductivity of 5 at Cu�Bi2Te3. In: Journal of Materials Science .

Singh, AP and Srivastava, C (2024) Effect of zinc clustering, micro-texture, and surface oxide constituents on the electrochemical corrosion of Sn-Zn coatings electrodeposited at different current densities. In: Journal of Materials Science .

Agrawal, S and Panigrahi, A and Avadhani, GS and Suwas, S (2024) Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099. In: Journal of Materials Science .

Nimmal Haribabu, G and Thimukonda Jegadeesan, J and Prasad, RVS and Basu, B (2024) Machine learning analysis for melt pool geometry prediction of direct energy deposited SS316L single tracks. In: Journal of Materials Science .

Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .

Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .

Kumar, C and Reddy, S and Eswaramoorthy, NK and Ravanappa, P and Chintapenta, V and Srinivasan, D and Kumar, P (2024) Microstructure optimization for improving creep resistance of additively manufactured Ni-based superalloy IN939 through heat treatment. In: Journal of Materials Science .

Suwas, S and Skrotzki, W and Scheerbaum, N and Grosdidier, T and Fundenberger, J-J and Tóth, LS and Brokmeier, H-G (2024) Multi-scale investigation of microstructure and texture evolution during equal channel angular pressing of silver. In: Journal of Materials Science .

Serbesa, AT and Pal, V and Sreeram, PR and Legese, SS and Kumar, B and Adamo, CG and Mukherjee, S and Paliwal, M and Olu, FE and Tiwary, CS and Chattopadhyay, K (2023) Transport properties and microstructural evolution of Bi�Cu�Te ternary alloys. In: Journal of Materials Science, 58 (42). pp. 16462-16473.

Mishra, SR and Karati, A and Ghosh, S and Mallik, RC and Shabadi, R and Krishnan, PSSR and Yadav, SK and Ramanujan, RV and Murty, BS (2023) Lowering thermal conductivity in thermoelectric Ti2−xNiCoSnSb half Heusler high entropy alloys. In: Journal of Materials Science, 58 (26). pp. 1736-10752.

Adukkadan, A and Saha, S and Lalla, NP and Ranjan, R and Kumar, V (2023) New insights into suppression of intermediate incommensurate phase in lead zirconate stannate titanate antiferroelectric system. In: Journal of Materials Science, 58 (21). pp. 8878-8888.

Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.

Bansal, U and Srivastava, A and Esakkiraja, N and Tamilselvi, M and Paul, A (2023) Effect of Pt on diffusion-controlled growth characteristics of interdiffusion zone between CM247LC superalloy and Ni(Pt)Al bond coat. In: Journal of Materials Science, 58 (3). pp. 1305-1314.

Jenjeti, RN and Kumar, R and Vankayala, K and Sampath, S (2022) Optothermal and electrical properties of ultrathin alloys of mixed dichalcogenides. In: Journal of Materials Science, 57 (30). pp. 14339-14355.

Awasthi, S and Gaur, JK and Bobji, MS and Srivastava, C (2022) Nanoparticle-reinforced polyacrylamide hydrogel composites for clinical applications: a review. In: Journal of Materials Science, 57 (17). pp. 8041-8063.

Athira, KS and Pandey, P and Prabhakar, KVP and Chattopadhyay, K and Chatterjee, S (2022) Laser welding of a W-free precipitation strengthened Co-base superalloy. In: Journal of Materials Science, 57 (13). pp. 7085-7100.

Saha, P and Rakshit, R and Gorai, A and Mandal, D and Mandal, K (2022) Unusual dielectric properties of hollow magnesium ferrite nanospheres: a potential lightweight microwave absorber. In: Journal of Materials Science, 57 (7). pp. 4569-4582.

Elangovan, H and Sengupta, S and Narayanan, R and Chattopadhyay, K (2021) Silicon nanoparticles with UV range photoluminescence synthesized through cryomilling induced phase transformation and etching. In: Journal of Materials Science, 56 (2). pp. 1515-1526.

Khanna, S and Choudhury, A (2021) Role of interfacial energy and liquid diffusivities on pattern formation during thin-film three-phase eutectic growth. In: Journal of Materials Science .

Swetlana, S and Khatavkar, N and Singh, AK (2020) Development of Vickers hardness prediction models via microstructural analysis and machine learning. In: Journal of Materials Science, 55 (33). pp. 15845-15856.

Tekumalla, S and Bibhanshu, N and Suwas, S and Gupta, M (2019) Superior ductility in magnesium alloy-based nanocomposites: the crucial role of texture induced by nanoparticles. In: Journal of Materials Science .

Mungole, Tarang and Nadammal, Naresh and Dawra, Kunal and Kumar, Praveen and Kawasaki, Megumi and Langdon, Terence G (2013) Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion. In: Journal of Materials Science, 48 (13). pp. 4671-4680.

Kumar, Sunil and Varma, KBR (2011) Crystal structure and electrical properties of CaNaBi2Nb3O12 ceramics. In: Journal of Materials Science , 46 (8). pp. 2606-2610.

Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Sarma, Subramanya V and Gurao, NP and Wilde, G (2011) Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes. In: Journal of Materials Science , 46 (8). pp. 2662-2671.

Reddy, Bhupal and Bhattacharya, P and Singh, Bawa and Chattopadhyay, K (2009) The effect of ball milling on the melting behavior of Sn-Cu-Ag eutectic alloy. In: Journal of Materials Science, 44 (9). pp. 2257-2263.

Majhi, Koushik and Varma, KBR (2009) Crystallization kinetic studies of CaBi2B2O7 glasses by non-isothermal methods. In: Journal of Materials Science, 44 (2). pp. 385-391.

Balasubramaniam, R and Basu, Bikramjit and Ranganathan, S and Suryanarayana, C and Upadhyaya, Anish (2009) Preface and foreword special issue: Prof T R Anantharaman. In: Journal of Materials Science, 44 (9). pp. 2177-2180.

Sailaja, RRN and Girija, BG and Madras, Giridhar and Balasubramanian, N (2008) Effect of compatibilization on mechanical and thermal properties of polypropylene–soy flour composites. In: Journal of Materials Science, 43 (1). pp. 64-74.

Bhowmick, Ranadeep and Majumdar, Bhaskar and Misra, Dinesh K and Ramamurty, Upadrasta and Chattopadhyay, K (2007) Synthesis of bulk metallic glass composites using high oxygen containing Zr sponge. In: Journal of Materials Science, 42 (22). pp. 9359-9365.

Shri Prakash, B and Varma, KBR (2007) The influence of the segregation of Cu-rich phase on the microstructural and impedance characteristics of $CaCu_3Ti_4O_{12}$ ceramics. In: Journal of Materials Science, 42 (17). pp. 7467-7477.

Kumar, Sanjiv and Raju, VS and Kutty, TRN (2007) Investigations on surface composition and microstructure of sintered barium titanate. In: Journal of Materials Science, 42 (11). pp. 3977-3984.

Veerapur, Ravindra S and Gudasi, KB and Sairam, M and Shenoy, RV and Netaji, M and Raju, KVSN and Sreedhar, B and Aminabhavi, TM (2007) Novel sodium alginate composite membranes prepared by incorporating cobalt(III) complex particles used in pervaporation separation of water–acetic acid mixtures at different temperatures. In: Journal of Materials Science, 42 (12). pp. 4406-4417.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system $PbO-RuO_2-TiO_2$. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Jacob, KT and Subramanian, R (2007) Thermodynamic assessment of phase relations in the system PbO-RuO2-TiO2. In: Journal of Materials Science, 42 (7). pp. 2521-2523.

Eraiah, B and Anavekar, RV and Asokan, S (2007) Electrical switching and spectroscopic studies of silver-vanado-phosphate glasses. In: Journal of Materials Science, 42 (3). pp. 784-788.

Ranganathan, S and Kaplan, WD (2006) Advanced Materials and Characterization: Proceedings of the Brandon Symposium. In: Journal of Materials Science, 41 (23). pp. 7667-7668.

Ranganathan, S and Srivastava, AK and Lord, EA (2006) Coincidence-site lattices as rational approximants to irrational twins. In: Journal of Materials Science, 41 (23). pp. 7696-7703.

Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.

Kishore, * and Shankar, Ravi and Sankaran, S (2006) Effects of microballoons’ size and content in epoxy on compressive strength and modulus. In: Journal of Materials Science, 41 (22). pp. 7459-7465.

Kim, SH and Chattopadhyay, K and Inkson, BJ and Möbus, G and Kim, WT and Kim, DH (2006) Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint. In: Journal of Materials Science, 41 (18). pp. 6081-6086.

Thomas, Bejoy and Despandey, U and Sugunan, S (2006) Towards a Green Synthesis of LAB's: Effect of Rare Earth Metal Ions on the Benzene Alkylation with 1-Dodecene over NaFAU-Y Zeolites. In: Journal of Materials Science, 41 (5). pp. 1611-1616.

Farrer, Jeffrey K and Carter, Barry C and Ravishankar, N (2006) The effects of crystallography on grain-boundary migration in alumina. In: Journal of Materials Science, 41 (3). pp. 661-674.

Varghese, V and Chattopadhyay, K and Narayanasamy, A (2004) Factors influencing the kinetics of electrochemical reactions in milling. In: Journal of Materials Science, 39 (16-17). pp. 5161-5167.

Sudakar, C and Subbanna, GN and Kutty, TRN (2004) Effect of cationic substituents on particle morphology of goethite and the magnetic properties of maghemite derived from substituted goethite. In: Journal of Materials Science, 39 (13). pp. 4271-4286.

Venkataraman, BH and Varma, KBR (2003) Grain orientation and anisotropy in the physical properties of $SrBi_2(Nb_{1-x}V_x )_2O_9$ $(0 \leq x \leq 0.3)$ ceramics. In: Journal of Materials Science, 38 (24). pp. 4895-4903.

Wang, Cunshan and Gao, Linhui and Li, Gang and Wang, Yanfang and Xia, Yuanliang and Bysakh, S and Dong, Chuang (2003) Laser-induced self-propagating reaction synthesis of amorphous-based composite Zr-Al-Ni-Cu alloys. In: Journal of Materials Science, 38 (7). pp. 1377-1381.

Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.

Ratnakaram, YC and Chakradhar, Sreekanth RP and Ramesh, KP and Rao, JL and Ramakrishna, J (2003) Mixed alkali effect in borate glasses-optical absorption studies in ${Ho}^{3+}$ doped $x(Na_2O) . (30 - x )(K_2O) . 70(B_2O_3)$ glasses. In: Journal of Materials Science, 38 (4). pp. 833-841.

Sarkar, S and Raj, Mohan P and Chakraborty, S and Phanikumar, G and Chattopadhyay, K and Dutta, P (2003) Transport phenomena in laser surface alloying. In: Journal of Materials Science, 38 (1). pp. 155-164.

Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.

Bhat, VV and Madras, G and Joshi, P and Das, RN and Umarji, AM (2002) Determination of viscosities for alumina-polyethylene blends. In: Journal of Materials Science, 37 (7). pp. 1333-1336.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of $CuLaO_2$ and $CuLa_2O_4$. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Jacob, KT and Jayadevan, KP (2002) Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4. In: Journal of Materials Science, 37 (8). pp. 1611-1620.

Srivastava, AK and Ojha, SN and Ranganathan, S (2001) Microstructural features associated with spray atomization and deposition of Al-Mn-Cr-Si alloy. In: Journal of Materials Science, 36 (14). pp. 3335-3341.

Gupta, N and Sankaran, S and Woldesenbet, E and Kishore, * (2001) Studies on compressive failure features in syntactic foam material. In: Journal of Materials Science, 36 (18). pp. 4485-4491.

Prashanth, KK and Chattopadhyay, K and Majumder, J (1999) An investigation on the laser surface alloying of copper on iron. In: Journal of Materials Science, 34 (14). pp. 3437-3445.

Hari, NS and Kutty, TRN (1998) Effect of secondary-phase segregation on the positive temperature coefficient in resistance characteristics of $n-BaTio_3$ ceramics. In: Journal of Materials Science, 33 (13). 3275 -3284.

Nagarajan, R and Manjini, S and Chattopadhyay, K and Aoki, K (1997) The effect of ternary addition of silicon on the structure and microstructure of rapidly solidified equiatomic TiNi alloys. In: Journal of Materials Science, 32 (22). pp. 6021-6027.

Kumar, Sandeep and Jayaram, Vikram and Mani, TV and Warrier, KGK (1997) Degradation of Al2O3-�SiC-Al composites prepared by the oxidative growth of Al-alloys into SiC particulate. In: Journal of Materials Science, 32 (17). pp. 4719-4722.

Chitralekha, J and Gopal, ESR and Chattopadhyay, K (1997) Studies on elemental tellurium under high pressure. In: Journal of Materials Science, 32 (8). pp. 2177-2180.

Gopi Chandran, R and Patil, KC and Chandrappa, GT (1996) Combustion synthesis and properties of mullite-zirconia composites. In: Journal of Materials Science, 31 (21). pp. 5773-5779.

Satyanarayana, S and Karthikeyan, A and Venkateswarlu, M (1996) A.c. conductivity studies on the silver molybdo-arsenate glassy system. In: Journal of Materials Science, 31 (20). pp. 5471-5477.

Jayaram, V (1996) The role of volatile solute elements in directed melt oxidation of aluminium alloys. In: Journal of Materials Science, 31 (17). pp. 4591-4598.

Ezhilvalavan, S and Kutty, TRN (1996) Dependence of non-linearity coefficients on transition metal oxide concentration in simplified compositions of $ZnO+Bi_20_3+MO$ varistor ceramics (M=Co or Mn). In: Journal of Materials Science, 7 (2). pp. 137-148.

Manna, R and Sarkar, J and Surappa, MK (1996) Effect of second phase precipitates on recovery and recrystallization behaviour of cold-worked AI2024-SiCp composites. In: Journal of Materials Science, 31 (6). pp. 1625-1631.

Prasad, KVR and Varma, KBR (1995) High-temperature X-ray structural, thermal and dielectric characteristics of ferroelectric $Bi_2VO_{5.5}$. In: Journal of Materials Science, 30 (24). pp. 6345-6349.

Prasad, KVR and Raju, AR and Varma, KBR (1994) Grain size effects on the dielectric properties of ferroelectric $Bi_2VO_{5.5}$ ceramics. In: Journal of Materials Science, 29 (10). pp. 2691-2696.

Kumar, Ravi NV and Dwarakadasa, ES (1994) Fracture behaviour of $Al-Zn-Mg/SiC_p$ composites. In: Journal of Materials Science, 29 (6). pp. 1533-1539.

Ravindra, A and Bandyopadhyay, Amit and Dwarakadasa, ES and Srivatsan, TS (1994) Influence of hydrogen charging on mechanical properties of gas tungsten arc weldments of aluminium-lithium alloy 8090. In: Journal of Materials Science, 29 (5). pp. 1203-1212.

Padmanabhan, K and Kishore, * (1994) Fibre-matrix interfacial failure sequences in translaminar flexure of glass-epoxy composites. In: Journal of Materials Science, 29 (1). pp. 33-38.

Ramamurty, U and Bandyopadhyay, Amit and Dwarakadasa, ES (1993) Effect of heat treatment environment on Li depletion and on mechanical properties in AI-Li alloy sheets. In: Journal of Materials Science, 28 (23). pp. 6340-6346.

Jayanna, HS and Subramanyam, SV (1993) Thermal expansion of irradiated polypropylene from 10-340 K. In: Journal of Materials Science, 28 (9). pp. 2423-2427.

SK, Sinha and SK, Biswas (1992) Friction and wear behaviour of continuous fibre as cast Kevlar-phenolic resin composite. In: Journal of Materials Science, 27 (11). pp. 3085-3091.

Swamy, VT and Ranganathan, S and Chattopadhyay, K (1992) Microstructural development in microsecond pulsed laser elted polycrystalline nickel. In: Journal of Materials Science, 27 (5). 1375 -1379.

Padmanabhan, K and Kishore, * (1992) Flexural studies on asymmetric hybrid Kevlar fabric/epoxy composites. In: Journal of Materials Science, 27 (16). pp. 4282-4286.

Kaushal, S and Tankala, T and Rao, RMVGK and Kishore, * (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. In: Journal of Materials Science, 26 (23). pp. 6293-6299.

Lakshmi, MVS and Ramkumar, K and Satyam, M (1991) Role of a silver buffer layer on the superconducting Y-Ba-Cu-O films deposited by screen printing on alumina substrates. In: Journal of Materials Science, 26 (15). pp. 4092-4094.

Jacob, KT and Sreedharan, OM and Azad, AM (1991) Standard Gibbs' energies of formation of BaCuO2, Y2Cu2O5 and Y2BaCuO5. In: Journal of Materials Science , 26 (12). pp. 3374-3379.

Samajdar, S and Kishore, * (1991) Fracture surface characterization of epoxy-based GFRP laminates. In: Journal of Materials Science, 26 (4). pp. 977-984.

Bhat, MSN and Surappa, MK and Nayak, Sudhaker HV (1991) Corrosion behaviour of silicon carbide particle reinforced 6061/AI alloy composites. In: Journal of Materials Science, 26 (18). pp. 4991-96.

Raja, VS and Kishore, * and Ranganathan, S (1990) Microstructural and kinetic aspects of devitrification of $Fe_{40}Ni_{40}B_{20}$ metallic glass. In: Journal of Materials Science, 25 (11). pp. 4667-4677.

Kutty, TRN and Vivekanandan, R and Philip, Sam (1990) Precipitation of ultrafine powders of zirconia polymorphs and their conversion to $MZrO_3 (M = Ba, Sr, Ca)$ by the hydrothermal method. In: Journal of Materials Science, 25 (8). pp. 3649-3658.

Kingsley, JJ and Suresh, K and Patil, KC (1990) Combustion synthesis of fine-particle metal aluminates. In: Journal of Materials Science, 25 (2). pp. 1305-1312.

Kumar, N and Raman, KS and Sastry, DH and Little, EA (1990) Investigation of superplasticity by the impression creep technique. In: Journal of Materials Science, 25 (1). pp. 753-755.

Tiwari, RS and Claus, JC and Ranganathan, S (1989) Kinetics of two-stage crystallization in Metglas 2826A. In: Journal of Materials Science, 24 (12). pp. 4399-4402.

Damodaran, KV and Rao, KJ (1989) Elastic properties of phosphotungstate glasses. In: Journal of Materials Science, 24 (7). pp. 2380-2386.

Nagarajan, VS and Rao, KJ (1989) Crystallization Studies of ZrO2-SiO2 Composite Gels. In: Journal of Materials Science, 24 (6). 2140 -2146.

Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. In: Journal of Materials Science, 23 (5). pp. 1877-1885.

Jacob, KT and Kale, GM and Iyengar, GNK (1987) Phase equilibria and thermodynamic properties in the system $Ni-Mo-O$. In: Journal of Materials Science, 22 (12). pp. 4274-4280.

Kutty, TRN and Murugaraj, P (1987) Phase relations and dielectric properties of BaTi03 ceramics heavily substituted with neodymium. In: Journal of Materials Science, 22 (10). pp. 3652-3664.

Ravindranathan, P and Patil, KC (1987) Novel solid solution precursor method for the preparation of ultrafine nickel-zinc ferrites. In: Journal of Materials Science, 22 (9). pp. 3261-3264.

Padma, R and Rajkumar, K and Satyam, M (1987) Electrical conductivity of thermally grown titanium oxide film. In: Journal of Materials Science, 22 (6). pp. 2083-2086.

Akila, R and Jacob, KT and Shukla, AK (1987) Standard free energies of formation of rare earth sesquisulphides. In: Journal of Materials Science, 22 (6). pp. 2087-2093.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Studies on microstructure and density of sintered ZnO-based non-linear resistors. In: Journal of Materials Science, 22 (6). pp. 2229-2236.

Subrahmanyam, HN and Subramanyam, SV (1987) Thermal expansion of irradiated polystyrene. In: Journal of Materials Science, 22 (6). pp. 2079-2082.

Murthy, KSRC and Sathyam, M (1987) Trimming studies on polymer thick-film resistors. In: Journal of Materials Science, 22 (4). pp. 1413-1418.

Asokan, T and Iyengar, GNK and Nagabhushana, GR (1987) Non-ohmic behaviour of the binary ZnO-Nb2O5 system. In: Journal of Materials Science, 22 (3). pp. 1019-1023.

Murugaraj, P and Kutty, TRN and Rao, Subba M (1986) Diffuse phase transformations in neodymium-doped $BaTiO_3$ ceramics. In: Journal of Materials Science, 21 (10). pp. 3521-3527.

Jacob, KT and Kale, GM and Iyengar, GNK (1986) Oxygen potentials, Gibbs' energies and phase relations in the Cu-Cr-o system. In: Journal of Materials Science, 21 (8). pp. 2753-2758.

Asokan, S and Gopal, ESR and Parthasarathy, G (1986) Pressure-induced polymorphous crystallization in bulk Si20Te80 glass. In: Journal of Materials Science, 21 (2). pp. 625-629.

Harshavardhan, Solomon K and Krishna, KN and Rao, KJ (1985) Investigation of surface activity and photoinduced diffusion of metals in solution deposited amorphous films of $As_2S_3$. In: Journal of Materials Science, 20 (9). pp. 3253-3259.

Harshavardhan, K Solomon and Krishna, KN and Rao, KJ (1985) Investigation of surface activity and photoinduced diffusion of metals in solution deposited amorphous films of As2S3. In: Journal of Materials Science, 20 (9). pp. 3253-3259.

Rao, KJ and Rao, BG and Elliott, SR (1985) Glass formation in the system $PbO-PbCl_2$. In: Journal of Materials Science, 20 (5). pp. 1678-1682.

Bai1, BN Pramila and Biswas, SK (1984) Subsurface deformation in dry sliding of hypo-eutectic Al-Si alloys. In: Journal of Materials Science, 19 (11). pp. 3588-3592.

Sen, P and Srinivasan, A and Hegde, MS and Rao, CNR (1983) X-ray photoelectron spectroscopic studies of surface oxidation of metallic glasses. In: Journal of Materials Science, 18 (1). pp. 173-178.

Rao, GS and Prasad, YVRK (1983) Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12.7 at % cadmium alloy. In: Journal of Materials Science, 18 (8). pp. 2385-2392.

Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel. In: Journal of Materials Science, 17 (10). pp. 3009-3016.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Lakshmikumar, ST and Padaki, VC and Krishnapur, PP and Subramanyam, SV and Mallya, RM and Gopal, ESR (1982) Ultrasonic velocities and thermal expansion coefficients of amorphous Se80Te20 and Se90Te10 alloys near glass transitions. In: Journal of Materials Science, 17 (1). pp. 183-192.

Parthasarathy, K and Rao, KJ and Rao, CNR (1981) Dipole ordering in dilute solutions of ferroelectrics in antiferroelectric materials. In: Journal of Materials Science, 16 (5). pp. 1424-1426.

Krishnan, BP and Surappa, MK and Rohatgi, PK (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. In: Journal of Materials Science, 16 (5). p. 1209.

Madhava, MR and Bandyopadhyay, AK and Bhat, HL (1981) Effect of pressure on the electrical resistivity of indium sulphide. In: Journal of Materials Science, 16 (09). pp. 2617-2619.

Deonath, Bhat RT and Rohatgi, PK (1980) Fluidity of mica particle dispersed aluminium alloy. In: Journal of Materials Science, 15 (11). pp. 2777-2784.

Deonath, P and Bhat, RT and Rohatgi, PK (1980) Preparation of cast aluminium alloy-mica particle composites. In: Journal of Materials Science, 15 (5). pp. 1241-1251.

Nayak, HV Sudhaker and Vasu, KI and Prasad, YVRK (1980) Texture dependent stress corrosion failure of commercial titanium sheets in bromine-methanol solution. In: Journal of Materials Science, 15 (5). pp. 1265-1275.

Jacob, KT (1980) Phase relationships in the system Cr W O and thermodynamic properties of CrWO4 and Cr2WO6. In: Journal of Materials Science, 15 (9). pp. 2167-2174.

Pai, BC and Rohatgi, PK (1978) Production of cast aluminium-graphite particle composites using a pellet method. In: Journal of Materials Science, 13 (2). pp. 329-335.

Jacob, KT and Fitzner, K (1977) Ion exchange equilibria between (Mn,Co)O solid solution and (Mn,Co)Cr2O4 and (Mn,Co)Al2O4 spinel solid solutions at 1100oC. In: Journal of Materials Science, 12 (3). pp. 481-488.

Bhat, HL and Narayanan, PS (1975) The growth and characterization of strontium fluoro chloride crystals. In: Journal of Materials Science, 10 (11). pp. 2007-2010.

Jacob, KT (1975) The electronic structure of the alloying element and the stability of the gamma phase in iron alloys. In: Journal of Materials Science, 10 (6). pp. 1090-1092.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, P Rama (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformatio. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, PR (1973) Orientation Of Grain-Boundaries In Cadmium Recrystallized During Hot Deformation. In: Journal of Materials Science, 8 (10). pp. 1517-1519.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) Low-temperature deformation behaviour of polycrystalline copper. In: Journal of Materials Science, 6 (12). pp. 1433-1440.

Raman, KS and Das, ESD and Vasu, KI (1971) Clustering and solute-vacancy binding energies in Al-4.4% Zn alloy with 0.01% ternary additions. In: Journal of Materials Science, 6 (11). pp. 1367-1378.

Sastry, DH and Prasad, YVRK and Vasu, KI (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium. In: Journal of Materials Science, 6 (4). pp. 332-341.

Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Effect of Stacking-Fault Energy on Thermal Activation of Attractive Junctions in Change-in-Stress Creep of FCC Metals. In: Journal of Materials Science, 5 (6). pp. 495-506.

Raman, KS and Das, ESD and Vasu, KI (1970) Clustering phenomena in Al-4.4 at. % Zn alloy with 0.03 and 0.08 at. % Ag additions. In: Journal of Materials Science, 5 (2). pp. 105-116.