|
 | Up a level |
Jayaram, V (2023) METASTABLE CERAMIC OXIDES: SYNTHESIS AND CHARACTERISATION OF METASTABLE CERAMIC OXIDES. [Book Chapter]
Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.
Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.
Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.
Jaya, BN and Jayaram, V (2017) The edge-notched clamped beam as a fracture toughness test geometry: Crack stability and analytical expressions for the stress intensity factor. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 83-84.
Krishnan, R and Amirthapandian, S and Mangamma, G and Ramaseshan, R and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2009) Implantation Induced Hardening of Nanocrystalline Titanium Thin Films. In: International Conference on Nanoscience and Technology, FEB 27-29, 2008, Chennai.
Jayaram, V and Hegde, GM and Hegde, MS and Reddy, KPJ (2009) Experimental investigation of catalytic and non-catalytic surface reactions on SiO2 thin films with shock heated oxygen gas. In: 26th International Symposium on Shock Waves, JUL 15-20, 2007, Gottingen, Germany, pp. 153-158.
Jayaram, V and Hegde, MS and Reddy, KPJ (2009) Experimental investigation of interaction of strong shock heated oxygen gas on the surface of ZrO2 - a novel method to understand re-combination heating. In: 26th International Symposium on Shock Waves, JUL 15-20, 2007, Gottingen, Germany, pp. 159-164.
Reddy, KPJ and Hegde, MS and Jayaram, V (2009) Material processing and surface reaction studies in free piston driven shock tube. In: 26th International Symposium on Shock Waves, JUL 15-20, 2007, Gottingen, Germany, pp. 35-42.
Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous $ZrO_2-Al_2O_3$ powders. In: Proceedings of Creep Behavior of Advanced Materials for the 21st Century. TMS Annual Meeting, 28 Feb.-4 March 1999, San Deigo, CA, USA, pp. 369-378.
Gandhi, AS and Jayaram, V and Chokshi, AH (1999) Densification studies on amorphous ZrO2-Al2O3 powders. In: Symposium on Creep Behavior of Advanced Materials for the 21st-Century, at the 1999 TMS Annual Meeting, FEB 28-MAR 04, 1999, San Diego, California.
Jayaram, V (1998) Low temperature consolidation of metastable phases in the Al2O3-ZrO2 binary system. In: 6th Meeting of the International Conference on Ceramic Processing Science, SEP 07-10, 1997, Santa Barbara, California.
Bhatia, T and Chattopadhyay, K and Jayaram, V (1997) Effect of liquid precursor pyrolysis on phase selection in the $MgO-MgAl_2$$O_4$ system. In: 9th International Conference on Rapidly Quenched and Metastable Materials, AUG 25-30, 1996, BRATISLAVA, SLOVAKIA, pp. 930-937.
Jayaram, V and Kumar, S and Mani, TV and Saifullah, MSM and Sarkar, J and Warrier, KGK (1996) Infiltration of Al2O3-Al composites into coated silicon carbide. In: Discussion Meeting on Inorganic Matrix Composites, MAR 08-11, 1995, INDIAN INST SCI, BANGALORE, INDIA.
Jayaram, V and Daniel, BSS and Nagendra, N (1994) MMC, CMC AND Microstructural gradients by nitridation of al alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.
Jayaram, V and Daniel, BS and Nagendra, N and Muralidhar, HR (1994) MMC, CMC And Microstructural Gradients by Nitridation of al Alloys. In: 3rd IUMRS International Conference on Advanced Materials (ICAM), AUG 31-SEP 04, 1993, SUNSHINE CITY, JAPAN.
Govindarajan, S and Dasari, BP and Jayaram, V (2024) Effect of Humidity and Temperature on PVD TiAlN-Coating Wear. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .
Majumder, S and Sivakumar, G and Jayaram, V and Srinivasan, D (2024) Oxidation behaviour and thermal cycling response of HVAF and HVA(O)F NiCoCrAlY coatings. In: Journal of Materials Science .
Bansal, U and Esakkiraja, N and Baskaran, T and Paul, T and Ravi, R and Kumar, P and Jayaram, V and Paul, A (2024) Synergistic effects of Pt and Y addition in (Ni, Pt)CrAlY bond coat on oxide spallation resistance and growth of interdiffusion zone between bond coat and Ni-based single crystal superalloy. In: Corrosion Science, 240 .
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy. In: Acta Materialia, 266 .
Goel, P and Pramanik, A and Jayaram, V and Banerjee, D and Kumar, P (2024) High-throughput estimation of transient creep response of a Ti6Al alloy using bending. In: Journal of Materials Research .
Chakraborty, S and Yurchenko, SN and Georges, R and Simon, A and Lacinbala, O and Chandrasekaran, V and Jayaram, V and Dartois, E and Kassi, S and Gusdorf, A and Lesaffre, P and Jagadeesh, G and Arunan, E and Biennier, L (2024) Laboratory investigation of shock-induced dissociation of buckminsterfullerene and astrophysical insights. In: Astronomy and Astrophysics, 681 .
Hijazi, F and Pavan, AHV and Jayaram, V and Kumar, P (2024) Material volume reduction for creep testing using composite cantilevers and its application for residual life assessment. In: Materials Science and Engineering: A, 918 .
Parameswaran, G and Jayaram, V and Kailas, SV (2024) Predicting Low Sliding Friction in Al-Steel Reciprocating Sliding Experiment after a Controlled Grinding of the Steel Counterface. In: Lubricants, 12 (8).
Parameswaran, G and Jayaram, V and Kailas, Kailas (2023) Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding. In: Lubricants, 11 (9).
Kulkarni, A and Srinivasan, D and Ravanappa, P and Jayaram, V and Kumar, P (2023) Creep behavior of additively manufactured high strength A205 aluminum alloy. In: Additive Manufacturing Letters, 6 .
Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.
Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .
Goel, P and Kumar, P and Jayaram, V (2023) Estimation of stress redistribution for the extraction of power law creep parameters from bending. In: Mechanics of Materials, 177 .
Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.
Singh, SP and Jayaram, V and Srinivasan, D and Kumar, P (2022) High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy. In: Additive Manufacturing, 58 .
Roy, A and Singh, SV and Ambresh, M and Sahu, D and Meka, JK and Ramachandran, R and Samarth, P and Pavithraa, S and Jayaram, V and Hill, H and Cami, J and Rajasekhar, BN and Janardhan, P and Bhardwaj, A and Mason, NJ and Sivaraman, B (2022) Shock processing of amorphous carbon nanodust. In: Advances in Space Research .
Jayaram, V (2022) Small-Scale Mechanical Testing. In: Annual Review of Materials Research, 52 . pp. 473-523.
Jayaram, K and Prakash, G and Jayaram, V (2022) Convolutional neural network for classification of SiO2 scanning electron microscope images. In: International Journal of Business Intelligence and Data Mining, 21 (1). pp. 118-128.
Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .
Sunder, R and Raut, D and Jayaram, V and Kumar, P and Shastri, V (2021) Near-tip residual stress as an independent load interaction mechanism. In: International Journal of Fatigue, 151 .
Lal, D and Kumar, P and Bathe, R and Sampath, S and Jayaram, V (2021) Effect of microstructure on fracture behavior of freestanding plasma sprayed 7 wt.% Y2O3 stabilized ZrO2. In: Journal of the European Ceramic Society, 41 (7). pp. 4294-4301.
Senthil Kumar, S and Jayaram, V and Aruna, ST (2021) Enhanced power density in hydrocarbon-compatible anode-supported solid oxide fuel cell facilitated by a functional anode catalyst layer. In: Nanomaterials and Energy, 10 (2). pp. 118-127.
Venkatraman, K and Jayaram, V (2021) Crack velocity measurements through continuous stiffness monitoring of cyclically loaded notched micro-beams of thin graded Pt–Ni-Al bond coats. In: International Journal of Fracture, 227 (1). pp. 15-37.
Surendra, VS and Jayaram, V and Muruganantham, M and Vijay, T and Vijayan, S and Samarth, P and Hill, H and Bhardwaj, A and Mason, NJ and Sivaraman, B (2021) Complex structures synthesized in shock processing of nucleobases - Implications to the origins of life. In: International Journal of Astrobiology .
Kumawat, MK and Sarkar, R and Jayaram, V and Alam, MZ (2021) Fatigue behavior of a freestanding Pt-aluminide (PtAl) bond coat at ambient temperature. In: Surface and Coatings Technology, 427 .
Kannan, R and Rangaraj, L and Jayaram, V (2021) Reactive hot pressing of TiC0.5 ceramic at low applied pressure with 1 wt Ni additive. In: Journal of the American Ceramic Society .
Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.
Esakkiraja, N and Gupta, A and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2020) Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy. In: Acta Materialia, 195 (15). pp. 35-49.
Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.
Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.
Mishra, AK and Lambai, A and Jayaram, V and Jaya, BN (2020) The edge-notched clamped beam bend specimen as a fracture toughness test geometry. In: Theoretical and Applied Fracture Mechanics, 105 .
Jayaram, K and Prakash, G and Jayaram, V (2020) Automatic extraction of rarely explored materials and methods sections from research journals using machine learning techniques. In: International Journal of Advanced Computer Science and Applications, 11 (8). pp. 447-456.
Senthil Kumar, SS and Jayaram, V and Aruna, ST (2020) Co-fired anode-supported solid oxide fuel cell for internal reforming of hydrocarbon fuel. In: Energy, Ecology and Environment, 6 (1). pp. 55-68.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.
Sudarshan, B and Deep, S and Jayaram, V and Jagadeesh, G and Saravanan, S (2019) Experimental study of forward-facing cavity with energy deposition in hypersonic flow conditions. In: Physics of Fluids, 31 (10).
Kumar, SS and Jayaram, V and Ojha, PK and Badi, SP and Aruna, ST (2018) Co-Cu-YSZ-GDC as an anode material for internal reforming SOFC? In: Nanomaterials and Energy, 7 (2). pp. 44-51.
Pal, S and Jayaram, V (2018) Effect of microstructure on the hardness and dry sliding behavior of electroless Ni–B coating. In: Materialia, 4 . pp. 47-64.
Biennier, L and Jayaram, V and Suas-David, N and Georges, R and Singh, Kiran M and Arunan, E and Kassi, S and Dartois, E and Reddy, K P J (2017) Shock-wave processing of C60 in hydrogen. In: ASTRONOMY & ASTROPHYSICS, 599 .
Alam, Zafir Md and Kamat, SV and Jayaram, V and Karamched, Phani S and Ghosal, P and Das, DK (2014) Dynamic recovery and recrystallization during high-temperature tensile deformation of a free-standing Pt-aluminide bond coat. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 604 . pp. 18-22.
Alam, Md Zafir and Kamat, SV and Jayaram, V and Das, DK (2014) Micromechanisms of fracture and strengthening in free-standing Pt-aluminide bond coats under tensile loading. In: ACTA MATERIALIA, 67 . pp. 278-296.
Reddy, Koteeswara N and Jayaram, V and Arunan, E and Kwon, YB and Moon, WJ and Reddy, KPJ (2013) Investigations on high enthalpy shock wave exposed graphitic carbon nanoparticles. In: Diamond and Related Materials, 35 . pp. 53-57.
Vasu, K and Matte, HSSR and Shirodkar, Sharmila N and Jayaram, V and Reddy, KPJ and Waghmare, Umesh V and Rao, CNR (2013) Effect of high-temperature shock-wave compression on few-layer MoS2, WS2 and MoSe2. In: CHEMICAL PHYSICS LETTERS, 582 . pp. 105-109.
Alam, Md Zafir and Kamat, SV and Jayaram, V and Das, Dipak K (2013) Tensile behavior of a free-standing Pt-aluminide (PtAl) bond coat. In: ACTA MATERIALIA, 61 (4). pp. 1093-1105.
Saha, BP and Johnson, R and Jayaram, V (2012) COMPARATIVE EVALUATION OF THERMAL CONDUCTIVITY OF ZIRCONIA SOLID AND HONEYCOMB STRUCTURES. In: EXPERIMENTAL HEAT TRANSFER, 25 (4). pp. 267-281.
Sivaraman, B and Jayaram, V and Harish, HP (2012) Meteorite or meteor'wrong'. In: CURRENT SCIENCE, 103 (12). p. 1404.
Krishnan, R and David, C and Ajikumar, PK and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2011) Reactive pulsed laser deposition and characterization of niobium nitride thin films. In: Surface and Coatings Technology, 206 (6). pp. 1196-1202.
Alam, Zafir Md and Chatterjee, Debarati and Muraleedharan, K and Nandy, TK and Kamat, SV and Jayaram, V and Das, DK (2011) Effect of Strain Rate on Ductile-to-Brittle Transition Temperature of a Free-Standing Pt-Aluminide Bond Coat. In: Metallurgical and Materials Transactions A, 42 (6). pp. 1431-1434.
Alam, Zafir Md and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Microtensile testing of a free-standing Pt-aluminide bond coat. In: Materials & Design, 32 (3). pp. 1242-1252.
Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Study of Brittle-to-ductile-transition in Pt-aluminide bond coat using micro-tensile testing method. In: Transactions of the Indian Institute of Metals, 64 (1-2). pp. 57-61.
Alam, Md Zafir and Chatterjee, D and Kamat, SV and Jayaram, V and Das, DK (2010) Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test method. In: Materials Science and Engineering A, 527 (26). pp. 7147-7150.
Nachiappan, C and Rangaraj, L and Divakar, C and Jayaram, V (2010) Synthesis and Densification of Monolithic Zirconium Carbide by Reactive Hot Pressing. In: Journal of the American Ceramic Society, 93 (5). pp. 1341-1346.
Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Hazari, N and Das, DK (2010) Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature. In: Materials Science and Engineering A, 527 (3). pp. 842-848.
Biennier, Ludovic and Georges, Robert and Chandrasekaran, Vijayanand and Rowe, Bertrand and Bataille, Thierry and Jayaram, V and Reddy, KPJ and Arunan, E (2009) Characterization of circumstellar carbonaceous dust analogues produced by pyrolysis of acetylene in a porous graphite reactor. In: Carbon, 47 (14). pp. 3295-3305.
Ajikumar, PK and Kamruddin, M and Shankar, P and Gouda, Ramakrishna and Balamurugan, AK and Nithya, R and Tyagi, AK and Jayaram, V and Biswas, SK and Raj, Baldev (2009) Internal nitride formation during gas-phase thermal nitridation of titanium. In: Scripta Materialia, 61 (4). pp. 403-406.
Saravanan, S and Srinivas, Hari G and Jayaram, V and Paulraj, M and Asokan, S (2008) Synthesis and characterization of $Y_3Al_5O_{12}$ and $ZrO_2–Y_2O_3$ thermal barrier coatings by combustion spray pyrolysis. In: Surface and Coatings Technology, 202 (19). pp. 4653-4659.
Kavitha, R and Jayaram, V (2007) Deposition and characterization of alumina films produced by combustion flame pyrolysis. In: Surface and Coatings Technology, 201 (6). pp. 2491-2499.
Kavitha, R and Jayaram, V (2007) Band-Gap Engineering in ZnO-MgO Films Prepared by Combustion Flame Pyrolysis of Solution Precursors. In: Journal of Electronic Materials, 36 (10). pp. 1326-1332.
Suresha, SJ and Math, S and Jayaram, V and Biswas, SK (2007) Toughening through multilayering in TiN–AlTiN films. In: Philosophical Magazine, 87 (17). pp. 2521-2539.
Kavitha, R and Meghani, S and Jayaram, V (2007) Synthesis of titania films by combustion flame spray pyrolysis technique and its characterization for photocatalysis. In: Materials Science and Engineering:B, 139 (2-3). pp. 134-140.
Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.
Tharamani, CN and Beera, Parthasarathi and Jayaram, V and Begum, Noor Shahina and Mayanna, SM (2006) Studies on electrodeposition of Fe–W alloys for fuel cell applications. In: Applied Surface Science, 253 (4). pp. 2031-2037.
Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.
Suresha, SJ and Bhide, R and Jayaram, V and Biswas, SK (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. In: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 429 (1-2). 252 -260.
Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.
Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.
Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.
Rao, BS and Hemambar, C and Pathak, AV and Patel, KJ and Rodel, J and Jayaram, V (2006) Al/SiC carriers for microwave integrated circuits by a new technique of pressureless infiltration. In: IEEE Transactions on Electronics Packaging Manufacturing, 29 (1). pp. 58-63.
Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.
Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.
Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.
Kumari, Latha and Subramanyam, SV and Gayen, Arup and Jayaram, V (2005) Characterization and thermal stability of iodinated amorphous conducting carbon films. In: Thin Solid Films, 471 (1-2). pp. 252-256.
Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive Hot Pressing of Titanium Nitride–Titanium Diboride Composites at Moderate Pressures and Temperatures. In: Journal Of The American Ceramic Society, 87 (10). pp. 1872-1878.
Bhowmick, S and Xie, ZH and Hoffman, M and Jayaram, V and Biswas, SK (2004) Nature of contact deformation of TiN films on steel. In: Journal Of Materials Research, 19 (9). pp. 2616-2624.
Gayen, Arup and Priolkar, KR and Sarode, PR and Jayaram, V and Hegde, MS and Subbanna, GN and Emura, S (2004) $Ce_{1-x}Rh_xO_{2-\delta}$ Solid Solution Formation in Combustion-Synthesized $Rh/CeO_2$ Catalyst Studied by XRD, TEM, XPS, and EXAFS. In: Chemistry of Materials, 16 (11). pp. 2317-2328.
Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.
Bera, Parthasarathi and Priolkar, KR and Gayen, Arup and Sarode, PR and Hegde, MS and Emura, S and Kumashiro, R and Jayaram, V and Subbanna, GN (2003) Ionic Dispersion of Pt over $CeO_2$ by the Combustion Method: Structural Investigation by XRD, TEM, XPS, and EXAFS. In: Chemistry of Materials, 15 (10). pp. 2049-2060.
Gandhi, AS and Jayaram, V (2003) Plastically deforming amorphous $ZrO_2-Al_2O_3$. In: Acta Materialia, 51 (6). pp. 1641-1649.
Swaminathan, S and Rao, BS and Jayaram, V (2002) The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg. In: Materials Science and Engineering A, 337 (1-2). pp. 134-139.
Swaminathan, S and Rao, Srinivasa B and Jayaram, V (2002) The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen. In: Acta Materialia, 50 (12). pp. 3093-3104.
Anandan, C and Grips, VKW and Rajam, KS and Jayaram, V and Bera, P (2002) Investigation of surface composition of electrodeposited black chrome coatings by X-ray photoelectron spectroscopy. In: Applied Surface Science, 191 (1-4). pp. 254-260.
Aravinda, CL and Bera, Parthasarathi and Jayaram, V and Mayanna, SM (2002) An X-ray photoelectron spectroscopic study of electrochemically deposited Fe-P thin films on copper substrate. In: Applied Surface Science, 191 (1-4). pp. 128-137.
Gandhi, AS and Jayaram, V (2002) Pressure consolidation of amorphous $ZrO_2–Al_2O_3$ by plastic deformation of powder particles. In: Acta Materialia, 50 (8). pp. 2137-2149.
Aravinda, CL and Bera, Parthasarathi and Jayaram, V and Sharma, AK and Mayanna, SM (2002) Characterization of electrochemically deposited Cu-Ni black coatings. In: Materials Research Bulletin, 37 (3). pp. 397-405.
Aravinda, CL and Mayanna, SM and Bera, P and Jayaram, V and Sharma, AK (2002) XPS and XAES investigations of electrochemically deposited Cu-Ni solar selected black coatings on molybdenum substrate. In: Journal of Materials Science Letters, 21 (3). pp. 205-208.
Rao, Srinivasa B and Jayaram, V (2001) New technique for pressureless infiltration of Al alloys into Al2O3 preforms. In: Journal of Materials Research, 16 (10). pp. 2906-2913.
Ullal, CK and Balasubramaniam, KR and Gandhi, AS and Jayaram, V (2001) Non-equilibrium phase synthesis in $Al_2O_3-Y_2O_3$ by spray pyrolysis of nitrate precursors. In: Acta Materialia, 49 (14). pp. 2691-2699.
Rao, Srinivasa B and Jayaram, V (2001) Pressureless Infiltration of Al–Mg Based Alloys into $Al_2O_3$ Preforms: Mechanisms and Phenomenology. In: Acta Materialia, 49 (13). pp. 2373-2385.
Hemambar, C and Rao, Srinivasa B and Jayaram, V (2001) Al-SiC electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration. In: Materials and Manufacturing Processes, 16 (6). pp. 779-788.
Gandhi, AS and Jayaram, V and Chokshi, AH (2001) Low temperature densification behaviour of metastable phases in $ZrO_2–Al_2O_3$ powders produced by spray pyrolysis. In: Materials Science and Engineering A, 304-30 . pp. 785-789.
Shukla, AK and Neergat, M and Bera, Parthasarathi and Jayaram, V and Hegde, MS (2001) An XPS study on binary and ternary alloys of transition metals with platinized carbon and its bearing upon oxygen electroreduction in direct methanol fuel cells. In: Journal of Electroanalytical Chemistry, 504 (1). pp. 111-119.
Bera, Parthasarathi and Patil, KC and Jayaram, V and Subbanna, GN and Hegde, MS (2000) Ionic Dispersion of Pt and Pd on CeO2 by Combustion Method: Effect of Metal-Ceria Interaction on Catalytic Activities for NO Reduction and CO and Hydrocarbon Oxidation. In: Journal of Catalysis, 196 (02). pp. 293-301.
Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. In: Journal of Materials Research, 15 (5). pp. 1131-1144.
Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites. In: Journal of Materials Research, 15 (5). pp. 1145-1153.
Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.
Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.
Jayaram, V and Viswanathan, NN and Abinandanan, TA (1999) A dislocation pile-up model for the yield stress of a composite. In: Acta Materialia, 47 (5). pp. 1635-1643.
Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a ZrO2–Al2O3 nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.
Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a $ZrO_{2}-Al_{2}O_{3}$ nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.
Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.
Bera, Parthasarathi and Patil, KC and Jayaram, V and Hegde, MS and Subbanna, GN (1999) Combustion synthesis of nanometal particles supported on ${\alpha}-Al_{2}O_{3}$: CO oxidation and NO reduction catalysts. In: Journal Of Materials Chemistry, 9 (8). pp. 1801-1805.
Narayan, SP and Basu, K and Prasad, YVRK and Jayaram, V and Das, BN (1998) A study of the formability of melt spun Nd-Fe-B magnets. In: Scripta Materialia, 38 (11). pp. 1725-1730.
Jayaram, V and Mishra, RS and Majumdar, B and Lesher, C and Mukherjee, A (1998) Dense nanometric ZrO2---Al2O3 from spray-pyrolysed powders. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 133 (1-2). pp. 25-31.
Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.
Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.
Gandhi, AS and Saravanan, A and Jayaram, V (1996) Containerless processing of ceramics by aerodynamic levitation. In: Materials Science & Engineering A, 221 (1-2). pp. 68-75.
Jayaram, V (1996) The role of volatile solute elements in directed melt oxidation of aluminium alloys. In: Journal of Materials Science, 31 (17). pp. 4591-4598.
Ananthavel, Sundaravel P and Jayaram, V and Hegde, Manjanath S (1996) Electron donor-acceptor complex of ICl with diethyl ether - He I photoelectron spectroscopy and ab initio molecular orbital study. In: Faraday Transactions, 92 (10). 1677-1679 .
Jayaram, V and De Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). pp. 1829-1846.
Jayaram, V and Graef, M and Levi, CG (1994) Metastable extension of the fluorite phase field in Y2O3---ZrO2 and its effect on grain growth. In: Acta Metallurgica et Materialia, 42 (6). 1829 -1846 .
Dhandapani, SP and Jayaram, V and Surappa, MK (1994) Growth and microstructure of $Al_2O_3-SiC-Si(Al)$ composites prepared by reactive infiltration of silicon carbide preforms. In: Acta Metallurgica et Materialia, 42 (3). pp. 649-656.
Salas, O and Ni, H and Jayaram, V and Vlach, KC and Levi, CG and Mehrabian, R (1991) Nucleation and growth of Al2O3/metal composites by oxidation of aluminum alloys. In: Journal of Materials Research, 6 (9). pp. 1964-1981.
Vlach, KC and Salas, O and Ni, H and Jayaram, V and Levi, CG and Mehrabian, R (1991) A thermogravimetric study of the oxidative growth of Al2O3/Al alloy composites. In: Journal of Materials Research, 6 (9). pp. 1982-1995.
Jayaram, V and Kulkarni, GU and Rao, CNR (1989) Study of the electronic structures of high Tc cuprate superconductors by electron energy loss and secondary electron emission spectroscopies. In: Solid State Communications, 72 (1). pp. 101-105.
Jayaram, V (1989) Design And Fabrication Of An Electron-Energy Loss Spectrometer For Investigating Electronic-Structures Of Solid-Surfaces. In: Indian Journal of Pure & Applied Physics, 27 (7-8). pp. 429-437.
Hegde, MS and Jayaram, V and Kamath, PV and Rao, CNR (1985) Electron-Energy Loss Spectroscopy (Eels) Of Organic-Molecules In Vapor-Phase - Design And Fabrication Of An Indigenous Eel Spectrometer. In: Pramana, 24 (1-2). pp. 293-310.
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Corrigendum to �Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bond coats and Ni-based single crystal superalloy� Acta Mater. 266 (2024) 119687 (Acta Materialia (2024) 266, (S1359645424000405), (10.1016/j.actamat.2024.119687)). In: Acta Materialia, 277 .
Gandhi, AS and Jayaram, V and Chokshi, AH (1997) Phase evolution and densification of spray pyrolysed ZrO2-Al2O3 powders. In: Materials Science Forum, 243 . 227-232 .
Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. [Preprint]
Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3 / Al-AlN composites. [Preprint]
Nagendra, N and Rao, BS and Jayaram, V (1999) Microstructures and properties of Al2O3/ Al-AlN composites by Pressureless Infiltration of Al-alloys. [Preprint]
Gandhi, AS and Jayaram, V (1999) Pressure Consolidation of Amorphous ZrO2-Al2O3 by Plastic Deformation of Powder Particles. [Preprint]
Singh, SV and Jayaram, V and Meka, JK and Thiruvenkatam, V and Vijayan, S and Bhardwaj, A and Burchell, MJ and Mason, NJ and Sivaraman, B (2023) Extraterrestrial Impacts Creating Architectures for Life. Springer.
