|
 | Up a level |
Bora, Pritom J and Shahidsha, N and Madras, Giridhar and Kishore, * and Ramamurthy, Praveen C (2016) Novel poly (vinyl butyral) (PVB) /polyaniline-cenosphere composite film for EMI shielding. In: International Conference on Condensed Matter and Applied Physics (ICC), OCT 30-31, 2015, Bikaner, INDIA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture. In: ASME/STLE International Joint Tribology Conference, OCT 24-26, 2011, Los Angeles, CA, USA, pp. 71-73.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Effect Of Directionality Of Grinding Marks On Friction And Formation Of Transfer Layer. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel., pp. 307-314.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction and transfer layer formation in FCC metals: Role of surface texture and roughness parameters. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction in metal forming processes – A study using experiments and simulation. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of alloying element addition on friction and transfer layer formation in Al-Mg system: Role of Surface texture. In: ASME/STLE International Joint Tribology Conference (IJTC2009) Tennessee, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of tilt angle and grinding angle of the plate on friction and transfer layer formation. In: World Tribology Congress IV Kyoto, 2009, Japan.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of directionality of grinding marks on coefficient of friction and formation of transfer layer. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Studies on friction and formation of transfer Layer in HCP metals. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) The role of strain rate response on transfer layer formation during sliding. In: 1st International conference on Abrasive Processes, 21-25 September, Cambridge, U.K, 21-25 September, Cambridge.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2007) Response of Materials during sliding on various surface textures. In: ASME/STLE 2007 International Joint Tribology Conference (IJTC2007) , October 22–24, 2007, San Diego, California.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Effect of Surface Topography on Friction and Transfer Layer Formation during Sliding. In: Proceedings of The Third Asia International Conference on Tribology ASIATRIB 2006 , 2006, Kanazawa, Japan.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Influence of Roughness Parameters on Friction and Transfer Layer Formation. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) The Role of Surface Texture on Friction and Transfer Layer Formation - A Study of Aluminium and Steel Pair using Pin-on-Plate Sliding Tester. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Sharma, BS and Malhotra, JK and Mitra, AK and Parthasarathy, K and Iyengar, Ramakrishna BS and Naghabhushna, GR and Chandrashekharaiah, HS and Thukaram, D and Kishore, * and Padiyar, KR and Khincha, HP (1989) Over voltage Studies for UPSEB 765 kV Anpara-Unnao line operated at 400 kV. In: Second Work Shop and Conference on EHV Technology, Aug 7-10, 1989, Bangalore.
Manakari, Vyasaraj and Parande, Gururaj and Doddamani, Mrityunjay and Gaitonde, VN and Siddhalingeshwar, IG and Kishore, * and Shunmugasamy, Vasanth Chakravarthy and Gupta, Nikhil (2015) Dry sliding wear of epoxy/cenosphere syntactic foams. In: TRIBOLOGY INTERNATIONAL, 92 . pp. 425-438.
Sampathkumaran, P and Kishore, * and Seetharamu, S and Pattanashetti, VV and Kumar, Shekhar M and Niranjan, HB (2015) Fly ash cenospheres as reinforcement in different polymer composites - a comparative study of physical and mechanical properties. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 22 (3). pp. 354-362.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) SELF-ORGANIZATION AND FRICTION DURING SLIDING. In: PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE . pp. 273-275.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.
Doddamani, MR and Kulkarni, SM and Kishore, * (2011) Behavior of Sandwich Beams With Functionally Graded Rubber Core in Three Point Bending. In: Polymer Composites, 32 (10). pp. 1541-1551.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2011) Chromium-manganese iron alloy system design cast in metal and sand moulds for erosion resistance: a positron lifetime study. In: International Journal of Advanced Manufacturing Technology, 52 (1-4). pp. 45-52.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation. In: Journal of Tribology, 133 (1).
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.
Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.
Suresha, B and Siddaramaiah, * and Kishore, * and Seetharamu, S and Kumaran, P Sampath (2009) Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites. In: Wear, 267 (9-10). pp. 1405-1414.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2009) The effects of manganese content and mould size on abrasion and slurry erosion behaviour of chromium-manganese iron systems investigated by positron lifetime spectroscopy. In: Wear, 267 (9-10). pp. 1558-1565.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Effect of increased manganese addition and mould type on the slurry erosion characteristics of Cr-Mn iron systems. In: Bulletin of Materials Science, 31 (7). pp. 1001-1006.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.
Sekhar, Ravi K and Kishore, * and Sankaran, S (2008) Cure Behavior of Epoxy-Cyanate Ester Blend in Composite Systems: Evaluation Studies in Neat Resin Cast by Thermal and FTIR Techniques. In: Journal of Applied Polymer Science, 109 (3). pp. 2023-2028.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Processes-Induced Structural Transformations and the Impact Properties of Cr-Mn Iron Systems. In: Materials and Manufacturing Processes, 23 (3). pp. 320-325.
Karthikeyan, CS and Sankaran, S and Kishore, * (2007) Investigation of bending modulus of fiber-reinforced syntactic foams for sandwich and structural applications. In: Polymers for Advanced Technologies, 18 (3). pp. 254-256.
Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.
Kishore, * and Shankar, Ravi and Sankaran, S (2006) Effects of microballoons’ size and content in epoxy on compressive strength and modulus. In: Journal of Materials Science, 41 (22). pp. 7459-7465.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel. In: Journal of Tribology-Transactions of the ASME, 128 (4). pp. 697-704.
Kishore, * and Kiran, Raghu TR (2006) Impact response in glass-epoxy system with and without perforated PTFE-bearing material at the mid-thickness. In: Composite Interfaces, 13 (7). pp. 633-646.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Gradient syntactic foams: Tensile strength, modulus and fractographic features. In: Materials Science and Engineering: A, 412 (1&2). pp. 153-158.
Kishore, * and Sampathkumaran, P and Seetharamu, S (2005) Erosion and abrasion characteristics of high manganese chromium irons. In: Wear, 259 (1-6). pp. 70-77.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Thomas, P and Janardhana, M (2005) A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and slide wear characteristics. In: Wear, 259 (1-6). pp. 634-641.
Kishore, * and Santra, S (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part I - Room Temperature Curing. In: Journal of Reinforced Plastics and Composites, 24 (9). pp. 903-922.
Kishore, * and Barpanda, P and Kulkarni, SM (2005) Compression Strength of Saline Water-exposed Epoxy System Containing Fly Ash Particles. In: Journal pf Reinforced Plastics and Composites, 24 (15). 1567-1576.
Karthikeyan, Chedarampet S and Sankaran, Sundaram and Kishore, * (2005) Flexural Behaviour of Fibre-Reinforced Syntactic Foams. In: Macromolecular Materials and Engineering, 290 (1). pp. 60-65.
Kishore, * and Santra, Sanjitarani (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part II -Comparison of Data and Fracture Features of the Samples Cured via a Single Room Temperature and Multiple High Temperatures. In: Journal of Reinforced Plastics and Composites, 24 (10). pp. 1013-1024.
Kishore, * and Santra, Sanjitarani (2005) Individual and Combined Roles of CTBN and Fly Ash in Epoxy System Under Compression: Correlation between Microscopic Features and Mechanical Behavior. In: Journal of Reinforced Plastics and Composites, 24 (3). pp. 299-313.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short Beam Three Point Bend Tests in Syntactic Foams. Part I: Microscopic Characterization of the Failure Zones. In: Journal of Applied Polymer Science, 98 (2). pp. 673-679.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Test Study in Syntactic Foam. Part III: Effects of Interface Modification on Strength and Fractographic Features. In: Journal of Applied Polymer Science, 98 . pp. 687-693.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Tests in Syntactic Foams. Part II: Effect of Microballoons Content on Shear Strength. In: Journal of Applied Polymer Science, 98 . pp. 680-686.
Karthikeyan, CS and Sankaran, S and Kishore, * (2004) Elastic behaviour of plain and fibre-reinforced syntactic foams under compression. In: Materials Letters, 58 (6). pp. 995-999.
Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Correlating failure features to impact data in epoxy systems without and with silane surface bearing fly ash filler particles in varying amounts. In: Praktische Metallographie-Practical Metallography, 41 (1). pp. 22-36.
Kishore, * and Kumar, Kiran B (2004) The influence of the type and positioning of the interface material on the impact behaviour in two-layered epoxy pieces. In: Composite Interfaces, 11 (1). pp. 83-93.
Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Compression Strength of Aqueous Media Exposed Epoxy System Containing Silane Surface Bearing Fly Ash Particles. In: Journal of Reinforced Plastics and Composites, 23 (9). pp. 959-968.
Kishore, * and Harimkar, SP and Desai, DS (2004) Impact response of epoxy systems containing short fibres and/or oxide particles as reinforcements. In: Polymer International, 53 (9). pp. 1274-1281.
Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Water Ingression and Compression Properties of Epoxy Containing Ash Particles with their Surfaces Containing Paraffin Oil Film. In: Journal of Reinforced Plastics and Composites, 22 (16). pp. 1467-1476.
Kulkarni, SM and Kishore, * (2003) Effect of Filler–Fiber Interactions on Compressive Strength of Fly Ash and Short-Fiber Epoxy Composites. In: Journal of Applied Polymer Science, 87 (5). pp. 836-841.
Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Fractographic features of dry and water absorbed epoxy based ash filled particulate composites with and without surface treatments for fillers following short beam test. In: Practical Metallography, 40 (1). pp. 34-48.
Kulkarni, SM and Kishore, * (2003) Effects of Filler Content and Hygrothermal Ageing on Compressive Properties of Fly Ash-Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 22 (11). pp. 973-982.
Kishore, * and Ravikumar, NL and Sunil, D (2003) The effect of a starch envelope on fly ash particles on the impact properties of filled epoxy composites. In: Advanced Composites Letters, 12 (2). pp. 45-54.
Kishore, * and Kulkarni, SM and Sunil, D and Sharathchandra, S (2002) Effect of surface treatment on the impact behaviour of fly-ash filled polymer composites. In: Polymer International, 51 (12). pp. 1378-1384.
Kulkarni, SM and Kishore, * (2002) Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites. In: Journal of Materials Science (full set), 37 (20). pp. 4321-4326.
Gupta, N and Woldesenbet, E and Kishore, * (2002) Compressive fracture features of syntactic foams-microscopic examination. In: Journal of Materials Science (full set), 37 (15). pp. 3199-3209.
Kishore, * and Sridhar, GB (2002) On evaluating erosion by sand particles in polythene system without and with ceramic particles. In: Polymer Testing, 21 (4). pp. 473-477.
Kishore, * and Khan, Bijoysri and Viswanath, B (2002) Impact Response of Carbon-Epoxy Laminates Containing Buffer-Strip Layers. In: Journal of Applied Polymer Science, 85 (4). pp. 752-761.
Kulkarni, SM and Anuradha, D and Murthy, CRL and Kishore, * (2002) Analysis of filler-fibre interaction in fly ash filled short fibre-epoxy composites using ultrasonic NDE. In: Bulletin of Materials Science, 25 (2). pp. 137-140.
Kulkarni, SM and Kishore, * (2002) Studies on Fly Ash–Filled Epoxy-Cast Slabs Under Compression. In: Journal of Applied Polymer Science, 84 (13). pp. 2404-2410.
Kulkarni, SM and Kishore, * (2002) Compressive strength of epoxy with bimodal filling of flyash. In: Journal of Reinforced Plastics and Composites, 21 (9). pp. 857-865.
Kulkarni, SM and Kishore, * (2002) Effect of contact at the interface on the compressive properties of fly ash-epoxy composites. In: The Journal of Adhesion, 78 (2). pp. 155-166.
Kishore, * and Kulkarni, SM and Sharathchandra, S and Sunil, D (2002) On the use of an instrumented set-up to characterize the impact behaviour of an epoxy system containing varying fly ash content. In: Polymer Testing, 21 (7). pp. 763-771.
Kulkarni, SM and Mahajan, SS and Ravikumar, NL and Kishore, * (2002) Water ingression and the role of interface on the compressive properties of epoxy filled with treated fly ash. In: Composite Interfaces, 9 (5). 459-466 .
Karthikeyan, CS and Sankaran, S and Kumar, Jagdish MN and Kishore, * (2001) Processing and compressive strengths of syntactic foams with and without fibrous reinforcements. In: Journal of Applied Polymer Science, 81 (2). 405 -411.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (2001) On the SEM features of glass–epoxy composite system subjected to dry sliding wear. In: Wear, 247 (2). pp. 208-213.
Kishore, * and Maiti, A (2001) Compressive behavior and fracture features of rubber bearing glass-epoxy composites exposed to aqueous media. In: Journal of Reinforced Plastics and Composites, 20 (17). pp. 1546-1554.
Karthikeyan, CS and Kishore, * and Sankaran, S (2001) Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam. In: Journal of Reinforced Plastics and Composites, 20 (11). pp. 982-993.
Kishore, * and Khan, Bijoysri and Viswanath, B (2001) On the utility of an instrumented impact set-up to characterise the response of discontinuous buffer strips in carbon–epoxy systems in dry and wet conditions. In: Polymer Testing, 20 (4). pp. 453-457.
Gupta, N and Sankaran, S and Woldesenbet, E and Kishore, * (2001) Studies on compressive failure features in syntactic foam material. In: Journal of Materials Science, 36 (18). pp. 4485-4491.
Nanda, Ajaya K and Kishore, * (2001) Thermal-Initiating Potentialities of Poly(methyl methacrylate) Peroxide: Metamorphosis of Block-into-Block Copolymer and Comparative Studies on Surface Texture and Morphology. In: Journal Polymer Science A: Polymer Chemistry, 39 . pp. 546-554.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Vynatheya, S and Murali, A and Kumar, RK (2000) SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. In: Wear, 237 (1). pp. 20-27.
Karthikeyan, CS and Kishore, * and Sankaran, S (2000) Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams. In: Journal of Reinforced Plastics and Composites, 19 (9). pp. 732-742.
Kishore, * and Khan, Bijoysri and Viswanath, B (2000) Effect of insertion of buffer-strip on the response of carbon-epoxy system in short beam tests. In: Advanced Composites Letters, 9 (5). pp. 329-333.
Karthikeyan, CS and Sankaran, S and Kishore, * (2000) Influence of chopped strand fibres on the flexural behaviour of a syntactic foam core system. In: Polymer International, 49 (2). pp. 158-162.
Gupta, Nikhil and Karthikeyan, CS and Sankaran, S and Kishore, * (1999) Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without Fibers. In: Materials Characterization, 43 (4). pp. 271-277.
Kishore, * and Khan, B (1999) Micro and macroscopic features of impact failed defect induced carbon-epoxy composites. In: Praktische Metallographie / Practical Metallography, 36 (9). pp. 487-494.
Gupta, Nikhil and Kishore, * and Sankaran, S (1999) On the characterisation of syntactic foam core sandwich composites for compressive properties. In: Journal of Reinforced Plastics and Composites, 18 (14). pp. 1347-1357.
Kishore, * and Singh, VK (1999) Studies on the variations in compression strengths of graphite powders bearing glass-epoxy composites exposed to humid conditions. In: Journal of Reinforced Plastics and Composites, 18 (3). pp. 224-232.
Kishore, * and Kumar, Keshav (1998) Sliding wear studies in epoxy containing alumina powders. In: High Temperature Materials and Processes, 17 (4). pp. 271-274.
Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK and Kishore, * (1998) Sliding wear studies in glass-epoxy system through scanning microscopic observations. In: Bulletin of Materials Science, 21 (4). pp. 335-339.
Kishore, * and Venkatraman, S (1998) Impact behavior of glass-epoxy composites containing foam material. In: Journal of Applied Polymer Science, 67 (09). pp. 1565-1571.
Kishore, * and Venkatraman, S (1998) Failure features of foam bearing glass-epoxy composites subjected to compressive loading. In: Praktische Metallographie: Archives of Practical Metallography, 35 (1). pp. 31-39.
Kishore, * and Khan, B (1998) Comparative evaluation of impact performance of laminate composites containing impact induced/mechanically inserted defects. In: Journal of Reinforced Plastics and Composites, 17 (16). pp. 1463-1471.
Venkatraman, S and Kishore, * (1998) Investigations on the role of foam layers in the failure of glass-epoxy composite subjected to repeated impacts. In: Journal of Reinforced Plastics and Composites, 17 (08). pp. 741-751.
Venkatraman, S and Kishore, * (1998) Response to impacts in composites containing foam. In: Journal of Reinforced Plastics and Composites, 17 (14). pp. 1281-1291.
Venkatraman, S and Kishore, * (1997) Impact studies in glass epoxy laminates containing foam. In: Journal of Reinforced Plastics and Composites, 16 (7). pp. 618-630.
Venkatraman, S and Kishore, * (1997) The role of the interface in foam-bearing glass-epoxy composites subjected to impact loading. In: Composite Interfaces, 5 (1). pp. 55-67.
Kishore, * and Ramanathan, S and Rao, RMVGK (1996) Repeated drop weight impacts and post-impact ILSS tests on glass-epoxy composite. In: Bulletin of Materials Science, 19 (6). pp. 1133-1141.
Venkatraman, S and Kishore, * (1996) Study of fracture features in foam bearing glass epoxy composites subjected to repeated impacts. In: Bulletin of Materials Science, 19 (6). 1143-1153 .
Matheswaran, M and Padmanabhan, K and Kishore, * (1995) Static and impact behaviour of thermoplastic modified glass fabric/epoxy composites. In: Journal of Materials Science Letters, 14 (13). pp. 951-954.
Padrnanabhan, K and Kishore, * (1995) Interlaminar shear of woven fabric Kevlar-epoxy composites in three-point loading. In: Materials Science & Engineering A, 197 (1). pp. 113-118.
Padmanabhan, K and Kishore, * (1995) Failure behaviour of carbon fibre/epoxy composites in pin-ended buckling and bending tests. In: Composites, 26 (3). pp. 201-206.
Padmanabhan, K and Kishore, * (1994) On the elastic-plastic behaviour of woven fabric kevlar/epoxy composites. In: International Journal of Fracture, 65 (3). R59-R61.
Padmanabhan, K and Kishore, * (1994) Fibre-matrix interfacial failure sequences in translaminar flexure of glass-epoxy composites. In: Journal of Materials Science, 29 (1). pp. 33-38.
Chandrasekaran, T and Kishore, * (1993) On the roughness dependence of wear of steels: a new approach. In: Journal of Materials Science Letters, 12 (12). pp. 952-954.
Chandrasekaran, T and Kishore, * (1993) Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel. In: Wear, 161 (1-2). pp. 105-109.
Padmanabhan, K and Kishore, * (1993) The looping behaviour of Kevlar fibres. In: Scripta Metallurgica et Materialia, 28 (3). pp. 367-370.
Chandrasekaran, T and Kishore, * (1993) Development of a new wear index in slurry erosion tests on steels. In: Journal of Materials Science Letters, 12 (2). pp. 96-98.
Kaushal, S and Kishore, * (1992) Analysis of deformation behaviour and fracture features in glass-epoxy composites toughened by rubber and carbon additions. In: Journal of Materials Science Letters, 11 (2). pp. 86-88.
Padmanabhan, K and Kishore, * (1992) Flexural studies on asymmetric hybrid Kevlar fabric/epoxy composites. In: Journal of Materials Science, 27 (16). pp. 4282-4286.
Kaushal, S and Tankala, T and Rao, RMVGK and Kishore, * (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. In: Journal of Materials Science, 26 (23). pp. 6293-6299.
Chandrasekaran, T and Natarajan, KA and Kishore, * (1991) Influence of microstructure on the wear of grinding media. In: Wear, 147 (2). 267 -274.
Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of SiC particles on compressive strength and fracture features of glass/phenolic composites. In: Scripta Metallurgica et Materialia, 25 (7). pp. 1641-1646.
Chandra, Sarath D and Avadhani, GS and Kishore, * (1991) Effect of SiC particles on the mechanical properties of glass-phenolic composites. In: Materials Science and Engineering A, 136 (30). pp. 179-182.
Chandra, Sarath D and Rao, RMVGK and Kishore, * (1991) Effect of post-curing on the mechanical properties and fracture features of some glass-phenolic composites. In: Journal of Materials Science Letters, 10 (21). pp. 1263-1266.
Samajdar, S and Kishore, * (1991) Fracture surface characterization of epoxy-based GFRP laminates. In: Journal of Materials Science, 26 (4). pp. 977-984.
Raja, VS and Kishore, * and Ranganathan, S (1990) Microstructural and kinetic aspects of devitrification of $Fe_{40}Ni_{40}B_{20}$ metallic glass. In: Journal of Materials Science, 25 (11). pp. 4667-4677.
Padmanabhan , K and Kishore, * (1990) Role of alumina in flexure of glass/epoxy composites. In: Bulletin of Materials Science, 13 (4). pp. 245-253.
Padmanabhan, K and Kishore, * (1990) The effect of carbon coating on the flexural properties of Kevlar/epoxy composites. In: Journal of Materials Science Letters, 9 (9). pp. 1109-1111.
Raja, VS and Kishore, * and Ranganathan, S (1988) Effect Of Molybdenum And Silicon On The Electrochemical Corrosion Behavior Of Fenib Metallic Glasses. In: Corrosion, 44 (5). pp. 263-270.
Raja, VS and Kishore, * and Ranganathan, S (1987) Crystallization behaviour of Metglas 2826 MB (Fe40Ni38Mo4B18). In: Bulletin of Materials Science, 9 (3). pp. 207-217.
Ravichandran, KS and Panchapagesan, TS and Kishore, * and Dwarakadasa, ES (1987) The effect of crack closure on the grain size dependence of fatigue crack growth threshold. In: Scripta Metallurgica, 21 (7). pp. 919-924.
Murthy, VSR and Seshan, S and Kishore, * (1987) Fractographic features of C.G.iron subjected to tension and fatigue. In: Microstructural Sciences, 15 . pp. 123-138.
Murthy, VSR and Kishore, * and Seshan, S (1986) Morphology Of Flake, Ductile And Compacted Graphite. In: Journal of Metals, 38 (12). pp. 24-28.
Ramesh, R and Ravikumar, K and Kishore, * (1986) Wear of En 31 steel. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 329-334.
Mohan, Rengarajan and Kishore, * (1985) Jute-Glass Sandwich Composites. In: Journal of Reinforced Plastics and Composites, 4 (2). pp. 186-194.
Kishore, * (1984) Some aspects of dislocation-precipitate interaction in under-aged aluminium-germanium alloy. In: Bulletin of Materials Science, 6 (6). pp. 1041-1046.
Murthy, VSR and Seshan, S and Kishore, * (1984) Characteristics of compacted graphite cast iron. In: Transactions of the American Foundrymen's Society, 92 . pp. 373-380.
Subramanian, C and Kishore, * (1984) Influence of Graphite Type, Modification and Hot Working on Wear of Aluminium Based Particulate Composites. In: Journal of Reinforced Plastics and Composites, 3 (4). pp. 278-293.
Ramesh, R and Kishore, * and Rao, RMVGK (1983) Dry wear studies on glass-fiber-reinforced epoxy composites. In: Wear, 89 (2). pp. 131-136.
Bankarusamy, V and Kishore, * (1983) Wear of gray cast iron. In: Wear, 86 (1). 173 -175.
Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear, 85 (2). pp. 163-169.
Anand, K and Kishore, * (1983) On the wear of aluminium-corundum composites. In: Wear., 85 (2). pp. 163-169.
Mohan, R and Kishore, * and Shridhar, MK and Rao, RMVGK (1982) Compressive strength of jute-glass hybrid fibre composites. In: Journal of Materials Science Letters, 2 (3). pp. 99-102.
Suresh, D and Kishore, * and Rohatgi, PK (1981) Working experience with a foundry solar furnace. In: Solar Energy, 27 (6). pp. 457-462.
Kishore, * and Vasu, KI (1972) Reply to comments on vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 6 (8). pp. 727-729.
Kishore, * and Vasu, KI (1971) Vacancy-germanium binding energy in aluminium matrix. In: Scripta Metallurgica, 5 (11). pp. 997-1000.
Kishore, * and Venkatraman, S (1999) Influence of foam/glass-epoxy interface on the macroscopic compressive failure features. In: Composite Interfaces, 6 (6). pp. 557-564.
