|
 | Up a level |
Kumar, D S Prem and Chetty, R and Femi, O E and Chattopadhyay, K and Malar, P and Mallik, R C (2017) Thermoelectric Properties of Bi Doped Tetrahedrite. In: 35th International Conference on Thermoelectrics (ICT), 2016, Wuhan, PEOPLES R CHINA, pp. 2616-2622.
Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2013) Friction Welding of Thixocast A356 Aluminium Alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2012), OCT 08-11, 2012, Cape Town, SOUTH AFRICA, pp. 305-310.
Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2012) Friction Welding of Thixocast A356 Aluminium Alloy. In: http://dx.doi.org/10.4028/www.scientific.net/SSP.192-193.305 , OCT 08-11, 2012 , Cape Town, SOUTH AFRICA, pp. 305-310.
Baler, N and Pandey, P and Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Effects of Ti and Cr Additions in a Co�Ni�Al�Mo�Nb-Based Superalloy. In: Minerals, Metals and Materials Series, 12-16 September 2021, Seven Springs; United States, pp. 929-936.
Ginley, DS and Tumas, W and Howe, MM and Dutta, P and Ho, CK and Vasi, JM and Van Hest, MFAM and Curtright, AE and Kumar, P and Chattopadhyay, K (2018) Solar Energy Research Institute for India and the United States (SERIIUS): A Focused Solar Consortium. In: 7th IEEE World Conference on Photovoltaic Energy Conversion, WCPEC 2018, 10 - 15 June 2018, Waikoloa Village, pp. 2488-2491.
Mukherjee, S and Ramakrishnan, A and Chen, K-H and Chattopadhyay, K and Suwas, S and Mallik, RC (2018) Tuning the thermoelectric properties of chalcopyrite by Co and Se double substitution. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.
Kumar, S and Mishra, SS and Naskar, N and Sarkar, S and Kashyap, S and Katiyar, NK and Paliwal, M and Biswas, K and Tiwary, CS and Chattopadhyay, K (2025) Experimental and theoretical study of size-dependent phase evolution in NaCl-KCl alloys. In: Next Materials, 6 .
Chowde Gowda, C and Chandravanshi, D and Tromer, RM and Malya, A and Chattopadhyay, K and Galvão, DS and Tiwary, CS (2024) Tuning the band gap of manganese telluride quantum dots (MnTe QDs) for photocatalysis. In: Applied Physics A: Materials Science and Processing, 130 (5).
Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2024) Examination of NCSL (near-coincidence site lattice) structures formed during β2 (Ni3-xTe2) precipitation in diffusion-bonded PbTe-Ni interfaces � A TEM study. In: Acta Materialia, 263 .
Adamo, CG and Srivastava, A and Legese, SS and Kumar, D and Kawamura, Y and Serbesa, AT and Punathil Raman, S and Olu, FE and Tiwary, CS and Singh, AK and Chattopadhyay, K (2024) Integrated First Principles and Experimental Investigation of Thermoelectric Transport in Zr/Ti Half-Heusler-Type High Entropy Alloys. In: Energy Technology .
Gunjal, V and Tiwary, CS and Chattopadhyay, K and Banerjee, D (2024) Intermetallic eutectics with gigapascal strength and enhanced ductility. In: Intermetallics, 168 .
Gowda, CC and Tromer, R and Chandravanshi, D and Pandey, P and Chattopadhyay, K and Galvao, DS and Tiwary, CS (2023) Two-dimensional manganese di-telluride based triboelectric nanogenerator. In: Nano Energy, 117 .
Serbesa, AT and Pal, V and Sreeram, PR and Legese, SS and Kumar, B and Adamo, CG and Mukherjee, S and Paliwal, M and Olu, FE and Tiwary, CS and Chattopadhyay, K (2023) Transport properties and microstructural evolution of Bi�Cu�Te ternary alloys. In: Journal of Materials Science, 58 (42). pp. 16462-16473.
Gowda, CC and Tromer, R and Pandey, P and Chandravanshi, D and Chandra, A and Chattopadhyay, K and Galvao, DS and Tiwary, CS (2023) Magnetic behavior of two-dimensional manganese telluride. In: 2D Materials, 10 (4).
Paul, R and Chatterjee, D and Das Ghosh, L and Narayanswamy, V and Singh, MP and Agarwal, M and Ghosh, D and Radhakrishna, M and Tiwary, CS and ProvaznÃk, I and Chattopadhyay, K (2023) Synthesis, characterization and In-vitro studies of CNT/Gd2O3 hybrid structure. In: Carbon Trends, 11 .
Bansal, U and Thakur, AK and Baheti, VA and Singh, SB and Mondal, A and Halder, AK and Chakraborty, A and Chattopadhyay, K and Paul, A (2023) Diffusion-controlled growth mechanism of phases and the microstructural evolution in the Ni-Zn system. In: Materials Characterization, 202 .
Prakash, A and Katiyar, NK and Suarez-Villagran, MY and Miller, Jr and Machado, LD and Tiwary, CS and Biswas, K and Chattopadhyay, K (2023) Effects of size on water vapour absorption and regeneration in lithium chloride nanocrystals. In: Materials Today Communications, 36 .
Pandey, P and Heczko, M and Khatavkar, N and Mazumder, N and Sharma, A and Singh, A and Mills, MJ and Chattopadhyay, K (2023) On the faulting and twinning mediated strengthening and plasticity in a γʹ strengthened CoNi-based superalloy at room temperature. In: Acta Materialia, 252 .
Gore, P and Singh, MP and Suryateja, D and Basu, B and Chattopadhyay, K (2023) Early-stage corrosion of IN 740H alloy in eutectic NaCl-KCl molten salt at high temperatures. In: Solar Energy, 252 . pp. 330-341.
Chandravanshi, D and Gope, S and Hemaprabha, E and Chattopadhyay, K (2023) Carbon nanofibers with hybrid crystalline-amorphous silicon nanoparticles: high-rate capable lithium-ion battery. In: Journal of Materials Science: Materials in Electronics, 34 (5).
Sarkar, S and Sinha, SK and Palaniswamy, D and Srivastava, C and Chattopadhyay, K (2023) Evolution of L12 Ordered Precipitates in Cu–Fe–Si Alloy System and Its Influence on Potential Strength–Conductivity Properties. In: Metallography, Microstructure, and Analysis .
Mazumder, N and Kumar, D and Singh, MP and Makineni, SK and Mukhopadhyay, NK and Chattopadhyay, K (2023) Synergistic effect of multimodal γ’ precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy. In: Scripta Materialia, 223 .
Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2022) Phase decomposition of Ni5Pb2Te3 in diffusion bonded PbTe-Ni interfaces – A TEM and thermodynamic study. In: Acta Materialia, 241 .
Mondol, S and Bansal, U and Dhanalakshmi, P and Makineni, SK and Mandal, A and Chattopadhyay, K (2022) Enhancement of high temperature strength of Al-Cu alloys by minor alloying and hot working process. In: Journal of Alloys and Compounds, 921 .
Sharma, A and Dixit, S and Baler, N and Agrawal, P and Makineni, SK and Chattopadhyay, K (2022) Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy. In: Materials Science and Engineering A, 855 .
Pandey, P and Pantawane, MV and Baler, N and Ravi, R and Makineni, SK and Chattopadhyay, K (2022) Effect of Cr addition on the γ′ strengthened CoNiCrAlMo compositionally complex alloy. In: Materials Science and Technology (United Kingdom) .
kumar, D and Legese, SS and Mukherjee, S and Femi, OE and Narayanan, R and Chattopadhyay, K (2022) Zr-based quaternary half-Heusler alloy systems ZrNimX0.5Sb1.5−m (X[dbnd]Fe/In): Studies on phase evolution, crystal structures and electronic properties. In: Journal of Alloys and Compounds, 908 .
Poobalan, RK and Singh, MP and Niranjan, K and Chattopadhyay, K and Barshilia, HC and Basu, B (2022) Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating. In: Journal of the American Ceramic Society .
Mondol, S and Bansal, U and Singh, MP and Dixit, S and Mandal, A and Paul, A and Chattopadhyay, K (2022) Microstructure-strength correlations in Al-Si-Cu alloys micro-alloyed with Zr. In: Materialia, 23 .
Singh, MP and Basu, B and Chattopadhyay, K (2022) Probing High-Temperature Electrochemical Corrosion of 316 Stainless Steel in Molten Nitrate Salt for Concentrated Solar Power Plants. In: Journal of Materials Engineering and Performance, 31 (6). 4902 -4908.
Mahapatra, PL and Tromer, R and Pandey, P and Costin, G and Lahiri, B and Chattopadhyay, K and Ajayan, PM and Roy, AK and Galvao, DS and Kumbhakar, P and Tiwary, CS (2022) Synthesis and Characterization of Biotene: A New 2DÂ Natural Oxide From Biotite. In: Small .
Athira, KS and Pandey, P and Prabhakar, KVP and Chattopadhyay, K and Chatterjee, S (2022) Laser welding of a W-free precipitation strengthened Co-base superalloy. In: Journal of Materials Science, 57 (13). pp. 7085-7100.
Bansal, U and Chattopadhyay, K (2022) Newer Developments in Aluminium Alloys Through Ordered Precipitates and Segregation of Transition Elements. In: Transactions of the Indian Institute of Metals, 75 (4). pp. 1015-1030.
Gore, P and Gosain, OP and Singh, MP and Basu, B and Chattopadhyay, K (2022) Towards Understanding the Oxide Evolution in Inconel 740H and Haynes 282 in Ambient Pressure Steam Oxidation. In: Oxidation of Metals .
Tiwary, CS and Pandey, P and Sarkar, S and Das, R and Samal, S and Biswas, K and Chattopadhyay, K (2022) Five decades of research on the development of eutectic as engineering materials. In: Progress in Materials Science, 123 .
Sharma, A and Mondal, C and Makineni, SK and Chattopadhyay, K and Banerjee, D (2022) Exploring the correlation between microscopic mechanisms and macroscopic behaviour in creep of a directionally solidified tungsten-free γ/γ� CoNi-base superalloy. In: Acta Materialia, 228 .
Singh, MP and Mohan Das, S and Gosain, OP and Chattopadhyay, K (2022) On the role of Ti aiding the protective barrier layer formation for γ�(L12)-strengthened Co-30Ni-10Al-5Cr-2Ta-2/4Ti superalloys. In: Corrosion Science, 194 .
Yadav, TP and Kumbhakar, P and Mukhopadhyay, NK and Galvao, DS and Ajayan, PM and Ranganathan, S and Chattopadhyay, K and SekharTiwary, C (2022) Revisiting Quasicrystals for the Synthesis of 2D Metals. In: Transactions of the Indian Institute of Metals .
Singh, MP and Olu, EF and Pandey, P and Chattopadhyay, K (2021) Thermophysical and magnetic properties of Co-Ni-Mo-Al-Ta class of tungsten free Co-based superalloys. In: Journal of Alloys and Compounds, 879 .
Pandey, P and Mazumder, N and Singh, MP and Patil, C and Sharma, A and Makineni, SK and Banerjee, D and Chattopadhyay, K (2021) Design of low mass density γ/γ� CoNi-based superalloys with promising high-temperature mechanical properties. In: Physical Review Materials, 5 (9).
Makineni, SK and Singh, MP and Chattopadhyay, K (2021) Low-Density, High-Temperature Co Base Superalloys. In: Annual Review of Materials Research, 51 . pp. 187-208.
Hsieh, K and Kochat, V and Biswas, T and Tiwary, CS and Mishra, A and Ramalingam, G and Jayaraman, A and Chattopadhyay, K and Raghavan, S and Jain, M and Ghosh, A (2021) Spontaneous Time-Reversal Symmetry Breaking at Individual Grain Boundaries in Graphene. In: Physical Review Letters, 126 (20).
Pandey, P and Shankar Prasad, A and Baler, N and Chattopadhyay, K (2021) On the effect of Ti addition on microstructural evolution, precipitate coarsening kinetics and mechanical properties in a Co�30Ni�10Al�5Mo�2Nb alloy. In: Materialia, 16 .
Pandey, P and Shankar Prasad, A and Baler, N and Chattopadhyay, K (2021) On the effect of Ti addition on microstructural evolution, precipitate coarsening kinetics and mechanical properties in a Co–30Ni–10Al–5Mo–2Nb alloy. In: Materialia, 16 .
Mukhopadhyay, S and Pandey, P and Baler, N and Biswas, K and Makineni, SK and Chattopadhyay, K (2021) The role of Ti addition on the evolution and stability of γ/γ� microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy. In: Acta Materialia, 208 .
Advaith, S and Parida, DR and Aswathi, KT and Dani, N and Chetia, UK and Chattopadhyay, K and Basu, S (2021) Experimental investigation on single-medium stratified thermal energy storage system. In: Renewable Energy, 164 . pp. 146-155.
Elangovan, H and Sengupta, S and Narayanan, R and Chattopadhyay, K (2021) Silicon nanoparticles with UV range photoluminescence synthesized through cryomilling induced phase transformation and etching. In: Journal of Materials Science, 56 (2). pp. 1515-1526.
Nandan, R and Pandey, P and Gautam, A and Bisen, OY and Chattopadhyay, K and Titirici, MM and Nanda, KK (2021) Atomic Arrangement Modulation in CoFe Nanoparticles Encapsulated in N-Doped Carbon Nanostructures for Efficient Oxygen Reduction Reaction. In: ACS Applied Materials and Interfaces .
Adhila, TK and Elangovan, H and Chattopadhyay, K and Barshilia, HC (2021) Kinked silicon nanowires prepared by two-step MACE process: Synthesis strategies and luminescent properties. In: Materials Research Bulletin, 140 .
Tiwari, K and Manolata Devi, M and Biswas, K and Chattopadhyay, K (2021) Phase transformation behavior in nanoalloys. In: Progress in Materials Science .
Elangovan, H and Maske, A and Narayanan, R and Ramamurthy, PC and Chattopadhyay, K (2020) Green synthesis of germanium nano ink and inkjet printing of Si/Ge heterostructure. In: Materials Research Bulletin, 132 .
Pandey, K and Basu, S and V, G and Potnis, A and Chattopadhyay, K (2020) Self-tuning and topological transitions in a free-falling nanofuel droplet flame. In: Combustion and Flame, 220 . pp. 144-156.
Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Achieving lower mass density with high strength in Nb stabilised γ/γ′ Co–Al–Mo–Nb base superalloy by the replacement of Mo with V. In: Materials Science and Engineering A, 794 .
Aramanda, SK and Khanna, S and Salapaka, SK and Chattopadhyay, K and Choudhury, A (2020) Crystallographic and Morphological Evidence of Solid�Solid Interfacial Energy Anisotropy in the Sn-Zn Eutectic System. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .
Dash, K and Yazar, KU and Chattopadhyay, K and Suwas, S (2020) Graded microstructure and texture in ultrafine grained multi-layered immiscible bimetallic system. In: Materialia, 13 .
Das, SM and Singh, MP and Chattopadhyay, K (2020) Effect of Cr addition on the evolution of protective alumina scales and the oxidation properties of a Ta stabilized γ'-strengthened Co-Ni-Al-Mo-Ta-Ti alloy. In: Corrosion Science, 172 .
Adhila, TK and Elangovan, H and John, S and Chattopadhyay, K and Barshilia, HC (2020) Engineering the Microstructure of Silicon Nanowires by Controlling the Shape of the Metal Catalyst and Composition of the Etchant in a Two-Step MACE Process: An In-Depth Analysis of the Growth Mechanism. In: Langmuir, 36 (32). pp. 9388-9398.
Pandey, P and Mukhopadhyay, S and Srivastava, C and Makineni, SK and Chattopadhyay, K (2020) Development of new γ�-strengthened Co-based superalloys with low mass density, high solvus temperature and high temperature strength. In: Materials Science and Engineering A, 790 .
Olu, FE and Hong, SJ and Chattopadhyay, K (2020) Mechanical and Thermoelectric Properties of Eutectic Composite (Bi, Sb)2Te3/Te Thermoelectric Material. In: Transactions of the Indian Institute of Metals, 73 (5). pp. 1147-1155.
Mukherjee, S and Parasuraman, R and Umarji, AM and Rogl, G and Rogl, P and Chattopadhyay, K (2020) Effect of Fe alloying on the thermoelectric performance of Cu2Te. In: Journal of Alloys and Compounds, 817 .
Baler, N and Pandey, P and Palanisamy, D and Makineni, SK and Phanikumar, G and Chattopadhyay, K (2020) On the effect of W addition on microstructural evolution and γ′ precipitate coarsening in a Co–30Ni–10Al–5Mo–2Ta–2Ti alloy. In: Materialia, 10 .
Tiwary, Chandra Sekhar and Paliwal, Manas and Kashyap, Sanjay and Pandey, Praful and Sarkar, Suman and Kundu, Ipshita and Bhaskar, Shakti and Jung, In Ho and Chattopadhyay, K and Banerjee, Dipankar (2020) Microstructures and mechanical properties of ternary Ti-Si-Sn alloys. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 770 .
Singh, SK and Chattopadhyay, K and Dutta, P (2020) Determination of Optimum Process Parameters and Residual Stress in Friction Welding of Thixocast A356 Aluminum Alloy. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .
Baler, N and Pandey, P and Chattopadhyay, K and Phanikumar, G (2020) Influence of thermomechanical processing parameters on microstructural evolution of a gamma-prime strengthened cobalt based superalloy during high temperature deformation. In: Materials Science and Engineering A, 791 .
Dan, A and Soum-Glaude, A and Carling-Plaza, A and Ho, CK and Chattopadhyay, K and Barshilia, HC and Basu, B (2019) Temperature- And Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber. In: ACS Applied Energy Materials, 2 (8). pp. 5557-5567.
Mondol, S and Kumar, S and Chattopadhyay, K (2019) Effect of thermo-mechanical treatment on microstructure and tensile properties of 2219ScMg alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 759 . pp. 583-593.
Pandey, P. and Makineni, S.K. and Gault, B. and Chattopadhyay, K. (2019) On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition. In: Acta Materialia, 170 . pp. 205-217.
Pandey, P and Sawant, AK and Nithin, B and Peng, Z and Makineni, SK and Gault, B and Chattopadhyay, K (2019) On the effect of Re addition on microstructural evolution of a CoNi-based superalloy. In: ACTA MATERIALIA, 168 . pp. 37-51.
Pandey, P and Makineni, SK and Samanta, A and Sharma, A and Das, SM and Nithin, B and Srivastava, C and Singh, AK and Raabe, D and Gault, B and Chattopadhyay, K (2019) Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure. In: Acta Materialia, 163 . pp. 140-153.
Pandey, P and Tiwary, CS and Chattopadhyay, K (2018) Effects of Cu and In Trace Elements on Microstructure and Thermal and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 48 (5). pp. 2660-2669. (In Press)
Jana, Dulal Chandra and Sundararajan, G and Chattopadhyay, K (2018) Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (11). pp. 5599-5606.
Nithin, B and Chattopadhyay, K and Phanikumar, G (2018) Characterization of the Hot Deformation Behavior and Microstructure Evolution of a New gamma-gamma ` Strengthened Cobalt-Based Superalloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (10). pp. 4895-4905.
Dixit, Saurabh and Kashyap, Sanjay and Kailas, Satish V and Chattopadhyay, K (2018) Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 767 . pp. 1072-1082.
Mondol, S and Kashyap, S and Kumar, S and Chattopadhyay, K (2018) Improvement of high temperature strength of 2219 alloy by Sc and Zr addition through a novel three-stage heat treatment route. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 732 . pp. 157-166.
Mondol, S and Makineni, S K and Kumar, S and Chattopadhyay, K (2018) Enhancement of High Temperature Strength of 2219 Alloys Through Small Additions of Nb and Zr and a Novel Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 3047-3057.
Tippireddy, S and Chetty, R and Naik, MH and Jain, M and Chattopadhyay, K and Mallik, RC (2018) Electronic and Thermoelectric Properties of Transition Metal Substituted Tetrahedrites. In: Journal of Physical Chemistry C, 122 (16). pp. 8735-8749.
Sivaprahasam, D and Sriramamurthy, A M and Bysakh, S and Sundararajan, G and Chattopadhyay, K (2018) Role of Cu During Sintering of Fe0.96Cu0.04 Nanoparticles. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (4). pp. 1410-1424.
Tiwary, C S and Prakash, J and Chakraborty, S and Mahapatra, D R and Chattopadhyay, K (2018) Subsurface deformation studies of aluminium during wear and its theoretical understanding using molecular dynamics. In: PHILOSOPHICAL MAGAZINE, 98 (29, A). pp. 2680-2700.
Hoque, S Manjura and Makineni, SK and Pal, A and Rahman, SA and Hossain, S and Islam, R and Ayyub, P and Chattopadhyay, K (2018) Two phase ferromagnetic composites in Co-Zr and Co-Zr-Fe systems containing anti-phase domain imparting very high strength. In: MATERIALS RESEARCH BULLETIN, 97 . pp. 61-70.
Pandey, P and Kashyap, S and Tiwary, C S and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.
Pandey, P and Kashyap, S and Tiwary, CS and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.
Mondol, S and Alam, T and Banerjee, R and Kumar, S and Chattopadhyay, K (2017) Development of a high temperature high strength Al alloy by addition of small amounts of Sc and Mg to 2219 alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 687 . pp. 221-231.
Nithin, B and Samanta, A and Makineni, S K and Alam, T and Pandey, P and Singh, Abhishek K and Banerjee, R and Chattopadhyay, K (2017) Effect of Cr addition on gamma-gamma ` cobalt-based Co-Mo-Al-Ta class of superalloys: a combined experimental and computational study. In: JOURNAL OF MATERIALS SCIENCE, 52 (18). pp. 11036-11047.
Jana, Dulal Chandra and Sundararajan, G and Chattopadhyay, K (2017) Effect of monomers content in enhancing solid-state densification of silicon carbide ceramics by aqueous gelcasting and pressureless sintering. In: CERAMICS INTERNATIONAL, 43 (6). pp. 4852-4857.
Tiwary, CS and Kishore, S and Vasireddi, R and Mahapatra, DR and Ajayan, PM and Chattopadhyay, K (2017) Electronic waste recycling via cryo-milling and nanoparticle beneficiation. In: MATERIALS TODAY, 20 (2). pp. 67-73.
Kiruthika, P and Makineni, S K and Srivastava, C and Chattopadhyay, K and Paul, A (2017) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys (vol 105, pg 438, 2016). In: ACTA MATERIALIA, 122 . p. 512.
Basha, Dudekula Althaf and Ravishankar, N and Chattopadhyay, K (2017) Phase stability behavior of nanoscaled lead-bismuth peritectic alloys embedded in zinc matrix. In: SCRIPTA MATERIALIA, 143 . pp. 68-71.
Dixit, Saurabh and Madhu, H C and Kailas, S V and Chattopadhyay, K (2017) Role of insert material on process loads during FSW. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 91 (9-12). pp. 3427-3435.
Basha, Dudekula Althaf and Ravishankar, N and Chattopadhyay, K (2017) Size-dependent solubility and phase transformation behavior of Sn-Cd nanoparticles in an Al matrix. In: JOURNAL OF MATERIALS SCIENCE, 52 (9). pp. 5194-5207.
Femi, Olu Emmanuel and Akkiraju, Karthik and Murthy, BS and Ravishankar, N and Chattopadhyay, K (2016) Effect of processing route on the bipolar contribution to the thermoelectric properties of n-type eutectic Bi22.5Sb7.5Te70 alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, 682 . pp. 791-798.
Pandey, P and Tiwary, CS and Chattopadhyay, K (2016) Effects of Minute Addition of Ni on Microstructure and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 45 (10). pp. 5468-5477.
Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.
Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.
Tiwary, CS and Mudakavi, Rajeev J and Kishore, Sharan and Kashyap, Sanjay and Elumalai, Rajasegaran and Chakravortty, Dipshikha and Raichur, Ashok M and Chattopadhyay, K (2016) Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents. In: RSC ADVANCES, 6 (115). pp. 114344-114352.
Tiwary, C S and Mudakavi, Rajeev J and Kishore, Sharan and Kashyap, Sanjay and Elumalai, Rajasegaran and Chakravortty, Dipshikha and Raichur, Ashok M and Chattopadhyay, K (2016) Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents. In: RSC ADVANCES, 6 (115). pp. 114344-114352.
Femi, Olu Emmanuel and Ravishankar, N and Chattopadhyay, K (2016) Microstructure evolution and thermoelectric properties of Te-poor and Te-rich (Bi,Sb)(2)Te-3 prepared via solidification. In: JOURNAL OF MATERIALS SCIENCE, 51 (15). pp. 7254-7265.
Babu, Arvindha D and Majumdar, Bhaskar and Sarkar, Rajdeep and Murty, BS and Chattopadhyay, K (2016) On the Structural Stability of Melt Spun Ribbons of Fe95-x Zr (x) B4Cu1 (x=7 and 9) Alloys and Correlation with Their Magnetic Properties. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (1). pp. 560-571.
Makineni, SK and Nithin, B and Palanisamy, D and Chattopadhyay, K (2016) Phase evolution and crystallography of precipitates during decomposition of new ``tungsten-free'' Co(Ni)-Mo-Al-Nb gamma-gamma ` superalloys at elevated temperatures. In: JOURNAL OF MATERIALS SCIENCE, 51 (17). pp. 7843-7860.
Santra, S and Makineni, S K and Suwas, S and Chattopadhyay, K and Paul, A (2016) Role of Ti on growth, morphology and microtexture evolution of A15-based V3Ga superconductor by bronze technique. In: MATERIALS & DESIGN, 110 . pp. 404-413.
Malviya, Kirtiman Deo and Chattopadhyay, K (2016) Temperature- and Size-Dependent Compositionally Tuned Microstructural Landscape for Ag-46 Atom % Cu Nanoalloy Prepared by Laser Ablation in Liquid. In: JOURNAL OF PHYSICAL CHEMISTRY C, 120 (48). pp. 27699-27706.
Tiwary, CS and Kashyap, S and Kim, DH and Chattopadhyay, K (2015) Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 639 . pp. 359-369.
Tiwary, CS and Javvaji, B and Kumar, C and Mahapatra, DR and Ozden, S and Ajayan, PM and Chattopadhyay, K (2015) Chemical-free graphene by unzipping carbon nanotubes using cryo-milling. In: CARBON, 89 . pp. 217-224.
Nandy, Anshuman and Tiwary, CS and Dutta, A and Chattopadhyay, K and Pradhan, SK (2015) Effect of Manganese (II) Oxide on microstructure and ionic transport properties of nanostructured cubic zirconia. In: ELECTROCHIMICA ACTA, 170 . pp. 360-368.
Singh, Shailesh Kumar and Chattopadhyay, K and Dutta, Pradip (2015) High-Temperature Workability of Thixocast A356 Aluminum Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 3248-3259.
Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Morphology control synthesis of Au-Cu2S metal-semiconductor hybrid nanostructures by modulating reaction constituents. In: RSC ADVANCES, 5 (70). pp. 56629-56635.
Malviya, Kirtiman Deo and Srivastava, Chandan and Chattopadhyay, K (2015) Phase formation and stability of alloy phases in free nanoparticles: some insights. In: RSC ADVANCES, 5 (45). pp. 35541-35550.
Makineni, SK and Nithin, B and Chattopadhyay, K (2015) Synthesis of a new tungsten-free gamma-gamma ` cobalt-based superalloy by tuning alloying additions. In: ACTA MATERIALIA, 85 . pp. 85-94.
Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Tunability of monodispersed intermetallic AuCu nanoparticles through understanding of reaction pathways. In: RSC ADVANCES, 5 (6). pp. 4399-4405.
Makineni, SK and Samanta, A and Rojhirunsakool, T and Alam, T and Nithin, B and Singh, AK and Banerjee, R and Chattopadhyay, K (2015) A new class of high strength high temperature Cobalt based gamma-gamma ` Co-Mo-Al alloys stabilized with Ta addition. In: ACTA MATERIALIA, 97 . pp. 29-40.
Makineni, SK and Nithin, B and Chattopadhyay, K (2015) A new tungsten-free gamma-gamma ` Co-Al-Mo-Nb-based superalloy. In: SCRIPTA MATERIALIA, 98 . pp. 36-39.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2014) Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al-Cu-Ni eutectic system. In: SCRIPTA MATERIALIA, 93 . pp. 20-23.
Singh, Shailesh K and Chattopadhyay, K and Phanikumar, G and Dutta, P (2014) Experimental and numerical studies on friction welding of thixocast A356 aluminum alloy. In: ACTA MATERIALIA, 73 . pp. 177-185.
Tiwary, CS and Chakraborty, S and Mahapatra, DR and Chattopadhyay, K (2014) Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification. In: JOURNAL OF APPLIED PHYSICS, 115 (20).
Tiwary, CS and Saha, S and Kumbhakar, P and Chattopadhyay, K (2014) Observation of Combined Effect of Temperature and Pressure on Cubic to Hexagonal Phase Transformation in ZnS at the Nanoscale. In: CRYSTAL GROWTH & DESIGN, 14 (9). pp. 4240-4246.
Chithra, S and Malviya, KD and Chattopadhyay, K (2014) Structural Evolution and Phase Stability of Hume-Rothery Phase in a Mechanically Driven Nanostructured Ag-15 at. pct Sn Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (3). pp. 1148-1160.
Hoque, Manjura S and Makineni, SK and Pal, A and Ayyub, P and Chattopadhyay, K (2014) Structural and magnetic properties of ultra-small scale eutectic CoFeZr alloys. In: JOURNAL OF ALLOYS AND COMPOUNDS, 620 . pp. 442-450.
Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructural and mechanical behavior study of suction cast Nb-Si binary alloys. In: Materials Science and Engineering: A, 583 . pp. 188-198.
Tiwary, CS and Kashyap, S and Biswas, K and Chattopadhyay, K (2013) Synthesis of pure iron magnetic nanoparticles in large quantity. In: Journal of Physics D: Applied Physics, 46 (38). 385001_1-385001_6.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets. In: Materials Science and Engineering: A, 577 . pp. 87-100.
Hoque, Manjura S and Srivastava, C and Kumar, V and Venkatesh, N and Das, HN and Saha, DK and Chattopadhyay, K (2013) Exchange-spring mechanism of soft and hard ferrite nanocomposites. In: Materials Research Bulletin, 48 (8). pp. 2871-2877.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast Nb-Si eutectic alloy. In: Materials Science and Technology, 29 (6). pp. 702-709.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part I. evolution of microstructure and texture. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2746-2763.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part II. mechanical properties anisotropy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2764-2777.
Hoque, Manjura S and Srivastava, C and Venkatesha, N and Anil Kumar, PS and Chattopadhyay, K (2013) Superparamagnetic behaviour and T-1, T-2 relaxivity of ZnFe2O4 nanoparticles for magnetic resonance imaging. In: Philosophical Magazine, 93 (14). pp. 1771-1783.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . pp. 200-207.
Suresh, KS and Gurao, NP and Singh, Satyaveer D and Suwas, Satyam and Chattopadhyay, K and Zherebtsov, SV and Salishchev, GA (2013) Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti-13Nb-13Zr. In: MATERIALS CHARACTERIZATION, 82 . pp. 73-85.
Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructure and mechanical properties of oxidation resistant suction cast Nb-Si-Al alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559 . pp. 74-85.
Hoque, Manjura S and Srivastava, C and Srivastava, N and Venkateshan, N and Chattopadhyay, K (2013) Synthesis and characterization of Fe- and Co-based ferrite nanoparticles and study of the T-1 and T-2 relaxivity of chitosan-coated particles. In: JOURNAL OF MATERIALS SCIENCE, 48 (2). pp. 812-818.
Kashyap, S and Chattopadhyay, K (2013) Synthesis and phase evolution in Nb/Si multilayers obtained by sequential laser ablation. In: THIN SOLID FILMS, 531 . pp. 312-319.
Hoque, Manjura S and Srivastava, C and Venkatesha, N and Chattopadhyay, K (2013) Synthesis, Characterization, and Nuclear Magnetic Resonance Study of Chitosan-Coated Mn1-xZnxFe2O4 Nanocrystals. In: IEEE TRANSACTIONS ON NANOBIOSCIENCE, 12 (4). pp. 298-303.
Chakraborty, S and Tiwary, CS and Kole, AK and Kumbhakar, P and Chattopadhyay, K (2013) A simple method of synthesis and optical properties of Mn doped ZnO nanocups. In: MATERIALS LETTERS, 91 . pp. 379-382.
Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 composite laminates. In: JOURNAL OF MATERIALS SCIENCE, 47 (17). pp. 6402-6419.
Prabhu, D and Veerababu, R and Balamuralikrishnan, R and Narayanasamy, A and Chattopadhyay, K (2012) Effect of addition of aluminum on the evolution of microstructure in HITPERM class Fe44Co44Zr7B4Cu1 alloy. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177 (11). pp. 791-796.
Hoque, S Manjura and Kader, SS and Paul, DP and Saha, DK and Das, HN and Rana, MS and Chattopadhyay, K and Hakim, MA (2012) Effect of Grain Size on Structural and Magnetic Properties of CuFe2O4 Nanograins Synthesized by Chemical Co-Precipitation. In: IEEE TRANSACTIONS ON MAGNETICS, 48 (5, Par). pp. 1839-1843.
Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties. In: Materials & Design, 36 . pp. 529-539.
Tiwary, CS and Mahapatra, Roy D and Chattopadhyay, K (2012) Effect of length scale on mechanical properties of Al-Cu eutectic alloy. In: APPLIED PHYSICS LETTERS, 101 (17).
Barai, K and Tiwary, CS and Chattopadhyay, PP and Chattopadhyay, K (2012) Synthesis of free standing nanocrystalline Cu by ball milling at cryogenic temperature. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 52-58.
Tsai, AP and Chandrasekhar, N and Chattopadhyay, K (1999) Size effect on the superconducting transition of embedded lead particles in an Al-Cu-V amorphous matrix. In: Applied Physics Letters, 75 (11). pp. 1527-1528.
Zhang, DL and Chattopadhyay, K and Cantor, B (1991) Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix. In: Journal of Materials Science (full set), 26 (6). pp. 1531-1544.
Mukherjee, S and Chetty, R and Madduri, PVP and Nayak, AK and Wojciechowski, K and Ghosh, T and Chattopadhyay, K and Suwas, S and Mallik, RC (2020) Reply to the ‘Comment on “Investigation on the structure and thermoelectric properties of CuxTe binary compounds”’ by A. H. Barajas-Aguilar, A. M. Garay-Tapia, and S. J. Jiménez-Sandoval,Dalton Trans., 2020, 49, DOI: 10.1039/C9DT03607E. In: Dalton Transactions, 49 (17). pp. 5738-5740.
