|
 | Up a level |
Sujata, M and Sastry, DH and Ramachandra, C (2004) Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V. In: Intermetallics, 12 (7-9). pp. 691-697.
Sundar, RS and Sastry, DH and Prasad, YVRK (2003) Hot workability of as-cast Fe3Al-2.5%Cr intermetallic alloy. In: Materials Science and Engineering A, 347 (1-2). pp. 86-92.
Laha, K and Latha, S and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) Comparison of creep behaviour of 2.25Cr-1Mo/9Cr - 1Mo dissimilar weld joint with its base and weld metals. In: Materials Science and Technology, 17 (10). pp. 1265-1272.
Prasad, YVRK and Sastry, DH and Deevi, SC (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys. In: Materials Science and Engineering A, 311 (1-2). pp. 42-53.
Sastry, DH and Prasad, YVRK and Deevi, SC (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy. In: Materials Science and Engineering A, 299 (1-2). 157 -163.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Laha, K and Chandravathi, KS and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Sundar, RS and Sastry, DH (2000) Creep behaviour of $Fe_3Al$-based alloys in $DO_3$ phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.
Sundar, RS and Sastry, DH (2000) Creep behaviour of Fe3Al-based alloys in DO3 phase field. In: Intermetallics, 8 (9-11). pp. 1061-1065.
Prasad, YVRK and Sastry, DH and Deevi, SC (2000) Processing maps for hot working of a P/M iron aluminide alloy. In: Intermetallics, 8 (9-11). pp. 1067-1074.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2000) Microstructural evaluation and creep deformation and rupture behavior of 9Cr-1Mo steel base metal, weld metal and weld joint. In: Workshop on Creep, Fatigue and Creep-Fatigue Interaction, JAN 20-22, 1999, Indira Gandhi Centre Atomic Research, Kalpakkam, India, pp. 217-221.
Sundar, RS and Kutty, TRG and Sastry, DH (2000) Hot hardness and creep of $Fe_3Al$-based alloys. In: Intermetallics, 8 (4). pp. 427-437.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (1999) Tensile flow behaviour of 2.25Cr-1Mo ferritic steel base metal and simulated heat affected zone structures of 2.25Cr-1Mo weld joint. In: Zeitschrift für Metallkunde, 90 (6). 449-455 .
Srinivasan, VS and Valsan, M and Sandhya, R and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (1999) High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel. In: International Journal of Fatigue, 21 (1). pp. 11-21.
Sundar, RS and Baligidad, RG and Prasad, YVRK and Sastry, DH (1998) Processing of iron aluminides. In: Materials Science and Engineering A, 258 (1-2). pp. 219-228.
Srinivasan, VS and Sandhya, R and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel. In: Scripta Materialia, 37 (10). pp. 1593-1598.
Sundar, RS and Sastry, DH (1996) Effect of microstructure on the creep behaviour of Ti-24Al-11Nb. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA.
Srinivasan, VS and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1996) Low cycle fatigue behaviour of a nitrogen modified 316L stainless steel at 823 K. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA, pp. 489-495.
Kutty, TRG and Ganguly, C and Sastry, DH (1996) Development of creep curves from hot indentation hardness data. In: Scripta Materialia, 34 (12). pp. 1833-1838.
Kutty, TRG and Ganguly, C and Jayadevan, NC and Sastry, DH (1996) Role of zirconium addition on stability of UAl3 phase in Al-U system. In: Journal of Nuclear Materials, 230 (3). pp. 295-301.
Rao, TVLN and Bhat, MV and Sastry, DH (1996) Corrosion and stress corrosion behaviour of an Mg-Li-Al alloy in presence of inhibitors in aqueous environment. In: British Corrosion Journal, 31 (1). pp. 44-48.
Kutty, TRG and Ganguly, C and Sastry, DH (1995) Thermal expansion of A1-U and A1-U-Zr alloys. In: Journal of Nuclear Materials, 226 (1-2). pp. 197-205.
Murali, S and Row, Guru TN and Sastry, DH and Raman, KS and Murthy, KSS (1994) Crystal structure of $\beta-FeSiAl_5$ and (Be-Fe)-$BeSiFe_2Al_8$ phases. In: Scripta Metallurgica et Materialia, 31 (3). pp. 267-271.
Valsan, M and Sastry, DH and Rao, KBS and Mannan, SL (1994) Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy. In: Metallurgical and materials transactions a, 25 (1). pp. 159-171.
Ray, SK and Sasikala, G and Rodriguez, P and Sastry, DH (1993) Continuity of plastic strain rate in stress relaxation tests. In: Materials Science and Technology, 9 (12). pp. 1079-1085.
Ray, SK and Rodriguez, P and Sastry, DH (1993) Deformation dynamics of SS-316 Between 1023-K TO 1223-K In The Framework of Cottrell-Stokes Law. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 31-39.
Ray, SK and Rodriguez, P and Sastry, DH (1993) Method of Analysis if Uniaxial Deformation Data. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 7-19.
Kumar, N and Raman, KS and Sastry, DH and Little, EA (1990) Investigation of superplasticity by the impression creep technique. In: Journal of Materials Science, 25 (1). pp. 753-755.
Sastry, DH and Murthy, Gunturi S (1986) Impression creep behavior of metals at high temperatures. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 369-379.
Murthy, GS and Sastry, DH (1982) Impression creep of zinc and the rate-controlling dislocation mechanism of plastic flow at high temperatures. In: Physica Status Solidi A, 70 (1). pp. 63-71.
Murthy, GS and Sastry, DH (1981) Impression Creep And High-Temperature Deformation Mechanism In Cadmium. In: Transactions of the Indian Institute of Metals, 34 (3). pp. 195-201.
Sastry, DH and Shastry, CV (1979) Cottrell-Stokes law during high temperature deformation of alpha-iron. In: Physica Status Solidi A, 53 (1). K5-K7.
Sastry, DH and Shastry, CV and Tangri, K (1977) Is there an athermal region of plastic flow in metals at intermediate temperatures? In: Philosophical Magazine, 35 (4). 1099 -1103.
Tangri, K and Sastry, DH (1975) Dislocation mechanisms for plastic flow of nickel in the temperature range 4.2 – 1200 K. In: Philosophical Magazine, 32 (3). pp. 513-525.
Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, P Rama (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformatio. In: Journal of Materials Science, 8 (10). pp. 1517-1519.
Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, PR (1973) Orientation Of Grain-Boundaries In Cadmium Recrystallized During Hot Deformation. In: Journal of Materials Science, 8 (10). pp. 1517-1519.
Sastry, DH and Vasu, KI (1972) Dislocation dynamics in alpha titanium Dynamique des dislocations dans le titane alphaVersetzungsdynamik in alpha-Titan. In: Acta Metallurgica, 20 (3). pp. 399-405.
Sastry, DH and Prasad, YVRK and Vasu, KI (1971) Low-temperature deformation behaviour of polycrystalline copper. In: Journal of Materials Science, 6 (12). pp. 1433-1440.
Sastry, DH and Prasad, YVRK and Vasu, KI (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium. In: Journal of Materials Science, 6 (4). pp. 332-341.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys. In: Materials Science and Engineering, 6 (5). pp. 327-333.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Effect of Stacking-Fault Energy on Thermal Activation of Attractive Junctions in Change-in-Stress Creep of FCC Metals. In: Journal of Materials Science, 5 (6). pp. 495-506.
Sastry, DH and Prasad, YVKR and Vasu, KI (1970) Reply to comments on 'STacking fault energies of close-packed hexagonal metals'. In: Scripta Metallurgica, 4 (5). pp. 347-348.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) On the effect of stacking fault energy on the thermal activation of attractive juntions in the low-temperature creep of F.C.C. metals. In: Scripta Metallurgica, 4 (3). pp. 219-220.
Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the low temperature deformation mechanism in polycrystalline cadmium. In: Acta Metallurgica, 17 (12). pp. 1453-1457.
Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the stacking fault energies of some close-packed hexagonal metals. In: Scripta Metallurgica, 3 (12). pp. 927-929.
Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The nature of thermal activation of attractive junctions in the low-temperature creep of quenched aluminium and aluminium-magnesium alloys. In: Scripta Metallurgica, 3 (11). pp. 771-775.
Vasu, KI and Sastry, DH and Prasad, YVRK (1969) On the mechanism of plastic flow at 86°k in quenched and aged aluminum. In: Philosophical Magazine , 20 (165). pp. 629-633.
Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The mechanism of hardening in quenched Al---0.5%Mg alloy at 86°K. In: Scripta Metallurgica, 3 (2). pp. 103-106.
