|
 | Up a level |
Singh, YP and Ahmad, N and Ghosal, A (2024) Dynamically Isotropic Gough-Stewart Platform Design with Flexural Joints. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 811-821.
Balaji Rao, K and Desayi, P (2024) Eco-Friendly Brittle Matrix Composite in Direct Tension�Determination of Upper and Lower Bounds for Ultimate Loads. In: 5th International Conference on Reliability, Safety and Hazard, ICRESH 2024, 21 February 2024through 24 February 2024, Mumbai, India., pp. 871-892.
Medipati, C and Deivandren, S and Govardhan, RN (2024) Effect of Nozzle Internal Shape on Near-Field Characteristics of Transverse Liquid Jet in a Supersonic Crossflow. In: Fluid Mechanics and Fluid Power, FMFP 2022, pp. 857-866.
Mahapatra, SK and Ghosal, A (2024) Modeling of Cable-Driven Continuum Robots with Multiple Generally Routed Cables. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 803-810.
Raghuram, S (2024) The Nature of Probability Density Functions in Turbulent Channel Flow. In: Fluid Mechanics and Fluid Power, FMFP 2022, pp. 49-57.
Rajashekhar, VS and Ghose, D and Doss, ASA (2024) Optimal Kinematic Design of a Robotic Lizard Using Four-Bar and Five-Bar Mechanisms. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 71-92.
Kavanur Ramesh, SK and Subramanya, J and Kumar, G and Kailas, SV and Mudalagi, S (2024) Optimization of Process Parameters in Friction Stir Processing for the Development of Polymer-Derived Aluminum Matrix Composites. In: 21st ISME International conference on Advances in Mechanical Engineering, ISME 2023, 13 July 2023through 15 July 2023, Bengaluru, pp. 71-79.
Biswas, L and Shukla, P (2024) Resonant Three-Wave Interactions in a Shear Flow with Density Stratification. In: 9th International and 49th National Conference on Fluid Mechanics and Fluid Power, FMFP 2022, 14 December 2022 through 16 December 2022, Roorkee, India, pp. 263-274.
Jaiswal, A and Barai, S and Jha, A and Dsouza, DA and Aggarwal, A (2024) Workspace and Trajectory Analysis of the 3-RPR Planar Parallel Manipulators with Joint Clearance. In: 6th International and 21st National Conference on Machines and Mechanisms, iNaCoMM 2023, 7 December 2023through 9 December 2023, Raipur, pp. 767-778.
Arya, BN and Jayanth, GR (2023) Design and Analysis of a Miniaturized Atomic Force Microscope Scan Head. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 153-166.
Vikrant, KS and Jayanth, GR (2023) A Diamagnetically Levitated Actuator Capable of Independent In-Plane and Out-of-Plane Positioning. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 - 11 December 2021, Jabalpur, pp. 385-394.
Rajashekhar, VS and Ghose, D (2023) Kinematic and Dynamic Analysis of a Six-Bar Aerial Gripper Mechanism. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021- 11 December 2021, Jabalpur, pp. 521-536.
Avinash, G and Kumar, S and Goutham Krishna, B and Mohammed Akram, B and Manoj, K and Eshanth, R and Sriprasad, NS (2023) Acoustic Analysis of Effect of Louver Window Material in Noise Attenuation. In: 2nd International Conference on Recent Advancements in Mechanical Engineering, ICRAME 2021, 7 - 9 February 2021, Virtual, Online, pp. 389-401.
Gupta, N and Chandra Kishen, JM (2023) Role of Interfacial Transition Zone on Response of Concrete Under Tension: A Micromechanical Approach. In: Advances in Reliability and Safety Assessment for Critical Systems -, 10 - 12 March 2022, Chennai, pp. 283-299.
Rana, R and Muthuveerappan, N and Basu, S (2023) CFD Analysis of Primary Air Flow Field of a Swirl Injector Using Embedded LES-Based Hybrid Model. In: 3rd National Aerospace Propulsion Conference, NAPC 2020, 17 - 19 December 2020, Virtual, Online at Bengaluru, pp. 629-646.
Sreenivasan, A and Deivandren, S (2023) Effect of Surface Temperature on Fuel Drop Splashing on Solid Surfaces. In: 3rd National Aerospace Propulsion Conference, NAPC 2020, 17 - 19 December 2020, Virtual, Online at Bengaluru, pp. 555-567.
Kannaraya, PS and Shreya, GH and Arora, M and Chakrabarti, A (2023) Impact of Smart Incoming Inspection System on the Production, in a Medical Device Manufacturing MSME. In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 157-165.
Hoque, SJ and Kumar, P (2023) Novel Supercritical Carbon Dioxide Cycle for a Waste Recovery Application. In: 3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering, FLAME 2022, 3-5 August 2022, Noida, pp. 51-56.
Chakrabarti, A (2023) What is Industry 4.0 for India? In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 167-182.
Singh, D and Yanamashetti, G and Suryanarayana, G and Jagadeesh, G (2023) Passive Control of Transonic Unsteady Pressure Fluctuations Using Aerodisc. In: 48th National Conference on Fluid Mechanics and Fluid Power, FMFP 2021, 27- 29 December 2021, Pilani, pp. 493-496.
Rather, Abira and Manohar, CS (2023) Probabilistic Model Reduction in the Analysis of Building Frames Subject to Sudden Loss of Columns. In: Advances in Reliability and Safety Assessment for Critical Systems - Proceedings of the 5th National Conference on Reliability and Safety NCRS 2022, 10-12 March 2022, Chennai, pp. 257-269.
Sharma, A and Manohar, CS (2023) Sampling Variance Reduction in Structural Reliability Estimation via Sequential MCMC Sampling Strategies. In: Advances in Reliability and Safety Assessment for Critical Systems - Proceedings of the 5th National Conference on Reliability and Safety NCRS 2022, 10 March 2022through 12 March 2022, Chennai, pp. 243-255.
Shetty, K and Manjunatha, CM and Gururaja, S and Srihari, S (2022) Hot-Wet Environmental Effects on In-Plane Shear Strength of IMA/M21E Aircraft Grade CFRP Composites. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 285-292.
Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.
Maharana, P and Ananthasuresh, GK (2022) Analysis of Connected Shallow Arches Under a Load from a Moving Rigid Wedge. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 - 11 December 2021, Jabalpur, pp. 191-204.
Bhat, S and Ananthasuresh, GK (2022) Control of Multiple Ferro-Bots for Steady Motion Using an Array of Electromagnets. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 395-405.
Lavanya, SB and Jayanth, GR (2022) Modeling and Optimal Design of Bridge-Type Displacement Amplifier. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021- 11 December 2021, Jabalpur, pp. 117-125.
Kar, A and Sen, D (2022) Studies on Coupler Curves of a 4-Bar Mechanism with One Rolling Pair Adjacent to the Ground. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 3-18.
Ahmad, N and Ranganath, R and Poomani, D and Ghosal, A (2022) Vibration Isolation Characteristics of a Modified Gough-Stewart Platform with the Top Platform Filled with Damping Particles. In: 5th International and 20th National Conference on Machines and Mechanisms, iNaCoMM 2021, 9 December 2021 - 11 December 2021, Jabalpur, pp. 243-256.
Singh, YP and Tolambiya, P and Sharma, K and Yadav, P and Mohanty, SS and Singh, H and Mukti, SK and Asraff, AK (2022) Design of a Common Bulkhead Dome for Cryogenic Stage. In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Bangalore, pp. 61-71.
Pattnaik, SPS and Rajan, NKS (2022) Performance Investigation of a Rectangular Ramjet Intake with Throat Flush Slot Bleed System. In: 3rd National Aerospace Propulsion Conference, NAPC 2020, 17 - 19 December 2020, Virtual, Online at Bengaluru, pp. 357-383.
Siddesh, SS and Harisankar, R and Ananthasuresh, GK (2022) Surface Profile Accuracy of Deployable Mesh Reflectors Based on Focal Offset. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 - 7 December 2019, Mandi, pp. 1355-1365.
Singhal, S and Sharma, M and Nalawade, H and Panda, PP (2022) Transition Dynamics Between Luminous and Blue Whirling Flames. In: 3rd National Aerospace Propulsion Conference, NAPC 2020, 17 - 19 December 2020, Bengaluru, pp. 569-579.
Chakrabarti, A (2022) Types of Designers and How to Develop Them. In: 2nd International Conference on Industry 4.0 and Advanced Manufacturing, I-4AM 2022, 10 - 11 January 2022, Virtual, Online at Bengaluru, pp. 367-382.
Samadhan, SA and Vidya Sagar, R (2022) Effect of Notch-to-Depth Ratio and Steel Fiber Volume Fraction on Acoustic Emissions Generated During Mode I Fracture Process in Steel Fiber Reinforced Concrete. In: Virtual Seminar on Applied Mechanics, VSAM 2021, 28-29 May 2021, Virtual, Online, Chennai, pp. 637-651.
Saha, I and Vidya Sagar, R (2022) Effect of Steel Fibre Content on the Information Entropy of Acoustic Emission Waveforms Generated During Mode I Fracture Process in Cementitious Composites. In: Virtual Seminar on Applied Mechanics, VSAM 2021, 28-29 May 2021, Virtual, Online, Chennai, pp. 135-150.
Paul, B and Manohar, CS (2022) Probabilistic Global Seismic Damage Analysis Based on a Novel Factor Mapping Method. In: Advances in Reliability and Safety Assessment for Critical Systems -, 10 - 12 March 2022, Chennai, pp. 229-241.
Patel, AD and Chowdhury, AR (2022) Vision-Based Object Classification Using Deep Learning for Mixed Palletizing Operation in an Automated Warehouse Environment. In: 2nd International Conference on Recent Advances in Manufacturing, RAM 2021, 10 - 12 June 2021, Surat, pp. 991-1011.
Balakuntala, MVS and Palathingal, S and Ananthasuresh, GK (2021) A Passive Universal Grasping Mechanism Based on an Everting Shell. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019through 20 December 2019, Bengaluru, pp. 601-608.
Mogra, M and Aouti, R and Rakesh, NS and Ahmed, A and Ashwin, R and Joseph, J and Ananthasuresh, GK (2021) Analysis of a Soil-Moisture Sensor for Potential Failure Modes and Mass Manufacturing. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 - 7 December 2019, Mandi, pp. 1157-1167.
Sharma, S and Ghosal, A (2021) Reaction Solvability Analysis Using Natural Coordinates. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 - 7 December 2019, Mandi, pp. 991-1000.
Ambastha, S and Umesh, S and Asokan, S (2021) Spinal Needles Insertion and Traversal Based on Fiber Bragg Gratings—From Conceptual Approach to Prototype Development. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 December 2019 through 7 December 2019, Mandi, pp. 463-470.
Jairaja, R and Naik, GN (2021) Fabrication of Single and Dual Adhesive Bonded Lap Joints Between Dissimilar Composite Adherends. In: Lecture Notes in Mechanical Engineering . pp. 185-195.
Bhat, MR and Harur Sampath, D and Khatri, S and Umesh, K (2021) Aramid fiber composite layers for fan blade containment in a gas turbine system: Some experimental studies. In: 2nd National Aerospace Propulsion Conference, NAPC 2018, 17-19 December 2019, Kharagpur; India, pp. 539-546.
Baby, A and Saeed Rila, BC and Anil Vishnu, GK and Pandya, HJ (2021) Assembly Management Software Integrated with Additive Manufacturing for Micro, Small, and Medium Enterprises. [Book Chapter]
Anjali, P and Vidya Sagar, R (2021) Characteristics of Acoustic Emissions Generated During Steel Rebar Corrosion in Reinforced Concrete. In: Conference and Exhibition on Non Destructive Evaluation, 5-7 Dec 2019, Bengaluru, pp. 271-281.
Hajoary, PK and Akhilesh, KB (2021) Conceptual Framework to Assess the Maturity and Readiness Towards Industry 4.0. In: Industry 4.0 and Advanced Manufacturing, Proceedings of I-4AM 2019, 28-29 June, 2019, Indian Institute of Science (IISc), Bangalore, India, pp. 13-23.
Kaushal, I and Siddharth, L and Chakrabarti, A (2021) A Conceptual Model for Smart Manufacturing Systems. [Book Chapter]
Singh, U and Trikha, M and Ghosal, A (2021) Dynamic Analysis of a Legged Lander System. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019 - 20 December 2019, Bengaluru, pp. 449-458.
Tandon, V and Jagadeesh, G and Ramana Murty, SV (2021) Effect of Incoming Wakes on Losses of a Low-Pressure Turbine of a Gas Turbine Engine. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicles, SAROD 2018, 29 Nov - 1 Dec 2018, Bengaluru; India, pp. 75-88.
Ashwin, KP and Ghosal, A (2021) Forward Kinematics of Cable-Driven Continuum Robot Using Optimization Method. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17-20 December 2019, Bengaluru; India, pp. 391-403.
Ghosh, S and Agrawal, R and Vidya Sagar, R (2021) Implementation of Acoustic Emission Testing to Study the Type of Cracking in Reinforced Concrete Beams. In: Conference and Exhibition on Non Destructive Evaluation, 5-7 Dec 2019, Bengaluru, pp. 283-296.
Vaghani, D and Sunder, D and Shukla, RK (2021) A Massively Parallel High-Order ADER-WENO Finite-Volume Scheme on Unstructured Meshes. In: 46th National Conference on Fluid Mechanics and Fluid Power, FMFP 2019, 9-11 Dec 2019, Coimbatore, pp. 561-569.
Banik, D and Palathingal, S and Ananthasuresh, GK and Ghosh, A (2021) A Mechanical OR Gate Using Pinned-Pinned Bistable Arches. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17-20 December 2019, Bengaluru; India, pp. 861-874.
Bodkhe, S and Ananthasuresh, G K (2021) Multi-patch Isogeometric Analysis of Planar Compliant Mechanisms. In: 5th Asian Mechanism and Machine Science Conference, MMS 2018, 17 December 2019 - 20 December 2019, Bengaluru, pp. 671-690.
Ananthan, M and Tomar, G (2021) Multiscale Simulation of Droplet Wall Interaction. In: 46th National Conference on Fluid Mechanics and Fluid Power, FMFP 2019, 9-11 Dec 2019, Coimbatore, pp. 533-538.
Bagale, N and Bhat, MR and Kandagal, SB (2021) A Non-destructive Approach of Dynamic Characterization of CFRP Composite Subjected to Hygrothermal Ageing. In: Conference and Exhibition on Non Destructive Evaluation, 5-7 Dec 2019, Bengaluru, pp. 117-123.
Murugan, JN and Govardhan, RN (2021) Observation of Low-Frequency Shock Oscillation Over a Forward-Facing Step. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicles, SAROD 2018, 29 Nov - 01 Dec 2018, Bengaluru; India, pp. 219-226.
Kannaraya, PS and Dilip, S and Deshpande, CS and Arora, M and Chakrabarti, A (2021) Smart Multi-material Weight Tracking Resource Bin. [Book Chapter]
Mane, LS and Bhat, MR (2021) Study of Effect of Surface Roughness in Single Lap Joint (SLJ) of Carbon-Fiber-Reinforced-Polymer (CFRP) Composites Using Radiography and Thermography. In: Conference and Exhibition on Non Destructive Evaluation, 5-7 Dec 2019, Bengaluru, pp. 1-9.
Edachery, V and Pariyar, A and Muthukumar, M and Harsha, S and Likhitha, CS and Kailas, SV (2021) A Study on the Tribological Behavior of Al/B4C/Graphite Hybrid Composite Fabricated by Friction Stir Processing. [Book Chapter]
Srinivas, MS and Panneer, R and Suvin, PS and Kailas, SV (2021) Synthesis and Testing of Novel Neem Oil-Based Cutting Fluid with Ionic Liquid Additives. [Book Chapter]
Pattnaik, SPS and Rajan, NKS (2021) Theoretical Design and Performance Evaluation of a Two-Ramp and a Three-Ramp Rectangular Mixed Compression Intake in the Mach Range of 2�4. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicles, SAROD 2018, 29 Nov - 1 Dec 2018, Bengaluru; India, pp. 143-166.
Singh, V and Mirzaeifar, S (2021) Towards Socio-Technical Network Analysis (STNA) in the Connected World of Industry 4.0 and Digital Manufacturing. [Book Chapter]
Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.
Ahmad, N and Ranganath, R and Ghosal, A (2020) A Simplified Impact Damping Model for Honeycomb Sandwich Using Discrete Element Method and Experimental Data. In: 13th International Conference on Vibrational Problems, ICoVP 2017, 29 Nov - 2 Dec 2017, Guwahati; India, pp. 337-353.
Somasundaram, V and Balakrishnan, N (2020) Gerlach shaping inspired air intake duct optimization. In: 2nd National Conference on Multidisciplinary Design, Analysis and Optimization, NCMDAO 2019, 21-23 March 2019, Bengaluru; India, pp. 3-18.
Kuppuraj, R and Pasupathy, SA (2019) A novel beetle-inspired fuel injection system for improved combustion efficiency. [Book Chapter]
Kalsar, R and Suwas, S (2018) Evolution of texture in some Mn steel. [Book Chapter]
