|
 | Up a level |
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy. In: Acta Materialia, 266 .
Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2024) Examination of NCSL (near-coincidence site lattice) structures formed during β2 (Ni3-xTe2) precipitation in diffusion-bonded PbTe-Ni interfaces � A TEM study. In: Acta Materialia, 263 .
Kashyap, A and Vishwanadh, B and Chauhan, A and Meka, SR (2024) Unusual plate-type iron-carbonitrides development in nitrocarburized Fe-4 at. V alloy. In: Acta Materialia, 263 .
Kumar, D and Muse, CA and Femi, OE and Ravishankar, N and Chattopadhyay, K (2023) The beneficial effect of Fe addition in PbTe-Ni diffusion bonded thermoelectric contact interfaces – A comprehensive phase evolution study. In: Acta Materialia, 261 .
Riyahi khorasgani, A and Kundin, J and Lukianova, O and Esakkiraja, N and Paul, A and Divinski, S and Steinbach, I (2023) Carbon effect on thermo-kinetics of Co-Cr-Fe-Mn-Ni high entropy alloys: A computational study validated by interdiffusion experiments. In: Acta Materialia, 261 .
Dash, A and Bhattacharyya, S and Paul, A (2023) Estimation of diffusion coefficients in NiCoFeCrAl multi-principal element alloy following an inventive design strategy of diffusion couples. In: Acta Materialia, 260 .
Pandey, P and Heczko, M and Khatavkar, N and Mazumder, N and Sharma, A and Singh, A and Mills, MJ and Chattopadhyay, K (2023) On the faulting and twinning mediated strengthening and plasticity in a γʹ strengthened CoNi-based superalloy at room temperature. In: Acta Materialia, 252 .
Su, Y and Liang, C and Sun, X and Zhang, H and Liang, Q and Zheng, Y and Hao, Y and Yang, R and Wang, D and Banerjee, D and Wang, Y (2023) Composition-dependent shuffle-shear coupling and shuffle-regulated strain glass transition in compositionally modulated Ti-Nb alloys. In: Acta Materialia, 246 .
Bian, B and Taheriniya, S and Muralikrishna, GM and Godha, A and Makineni, SK and Sankaran, S and Straumal, BB and Du, Y and Wilde, G and Divinski, SV (2023) Kinetic and structural insights into the grain boundary phase transitions in Ni-Bi alloys. In: Acta Materialia, 245 .
Dash, A and Paul, A (2023) Estimation of diffusion coefficients by intersecting different types of diffusion paths in a multi-principal element alloy. In: Acta Materialia, 244 .
Kumar, D and Singh, MP and Ravishankar, N and Chattopadhyay, K (2022) Phase decomposition of Ni5Pb2Te3 in diffusion bonded PbTe-Ni interfaces – A TEM and thermodynamic study. In: Acta Materialia, 241 .
Agrawal, P and Karthikeyan, S and Makineni, SK and Gault, B and Banerjee, D (2022) Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling. In: Acta Materialia, 222 .
Sharma, A and Mondal, C and Makineni, SK and Chattopadhyay, K and Banerjee, D (2022) Exploring the correlation between microscopic mechanisms and macroscopic behaviour in creep of a directionally solidified tungsten-free γ/γ� CoNi-base superalloy. In: Acta Materialia, 228 .
Volz, N and Xue, F and Zenk, CH and Bezold, A and Gabel, S and Subramanyam, APA and Drautz, R and Hammerschmidt, T and Makineni, SK and Gault, B and Göken, M and Neumeier, S (2021) Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy. In: Acta Materialia, 214 .
Mukhopadhyay, S and Pandey, P and Baler, N and Biswas, K and Makineni, SK and Chattopadhyay, K (2021) The role of Ti addition on the evolution and stability of γ/γ� microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy. In: Acta Materialia, 208 .
Sreedhar S, A and Ravindran, S and Shankar, G and Suwas, S and Narasimhan, R (2021) Fracture mechanism and toughness of a rolled magnesium alloy under dynamic loading. In: Acta Materialia, 202 . pp. 350-365.
Muralikrishna, GM and Tas, B and Esakkiraja, N and Esin, VA and Kumar, KCH and Golovin, IS and Belova, IV and Murch, GE and Paul, A and Divinski, SV (2021) Composition dependence of tracer diffusion coefficients in Fe–Ga alloys: A case study by a tracer-diffusion couple method. In: Acta Materialia, 203 .
Rogl, G and Ghosh, S and Wang, L and Bursik, J and Grytsiv, A and Kerber, M and Bauer, E and Mallik, RC and Chen, X-Q and Zehetbauer, M and Rogl, P (2020) Half-Heusler alloys: Enhancement of ZT after severe plastic deformation (ultra-low thermal conductivity). In: Acta Materialia, 183 . pp. 285-300.
Esakkiraja, N and Gupta, A and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2020) Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy. In: Acta Materialia, 195 (15). pp. 35-49.
Vaishakh, KV and Narasimhan, R and Yazar, KU and Suwas, S (2020) Mixed-mode (I and II) fracture behavior of a basal-textured magnesium alloy. In: Acta Materialia, 193 . pp. 99-114.
Dash, A and Esakkiraja, N and Paul, A (2020) Solving the issues of multicomponent diffusion in an equiatomic NiCoFeCr medium entropy alloy. In: Acta Materialia, 193 . pp. 163-171.
Liang, Q and Wang, D and Zheng, Y and Zhao, S and Gao, Y and Hao, Y and Yang, R and Banerjee, D and Fraser, HL and Wang, Y (2020) Shuffle-nanodomain regulated strain glass transition in Ti-24Nb-4Zr-8Sn alloy. In: Acta Materialia, 186 . pp. 415-424.
Khatavkar, N and Swetlana, S and Singh, AK (2020) Accelerated prediction of Vickers hardness of Co- and Ni-based superalloys from microstructure and composition using advanced image processing techniques and machine learning. In: Acta Materialia, 196 . pp. 295-303.
Pandey, P. and Makineni, S.K. and Gault, B. and Chattopadhyay, K. (2019) On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition. In: Acta Materialia, 170 . pp. 205-217.
Pandey, P and Makineni, SK and Samanta, A and Sharma, A and Das, SM and Nithin, B and Srivastava, C and Singh, AK and Raabe, D and Gault, B and Chattopadhyay, K (2019) Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure. In: Acta Materialia, 163 . pp. 140-153.
Baheti, Varun A and Kashyap, Sanjay and Kumar, Praveen and Chattopadhyay, Kamanio and Paul, Aloke (2017) Bifurcation of the Kirkendall marker plane and the role of Ni and other impurities on the growth of Kirkendall voids in the Cu–Sn system. In: Acta Materialia, 131 . pp. 260-270. ISSN 13596454
Balachandran, Shanoob and Kumar, Sharath and Banerjee, Dipankar (2017) On recrystallization of the α and β phases in titanium alloys. In: Acta Materialia, 131 . pp. 423-434. ISSN 13596454
Choi, In-Chul and Kim, Yong-Jae and Wang, Morris Y and Ramamurty, Upadrasta and Jang, Jae-il (2013) Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume. In: Acta Materialia, 61 (19). pp. 7313-7323.
Shastry, VV and Divya, VD and Azeem, MA and Paul, A and Dye, D and Ramamurty, U (2013) Combining indentation and diffusion couple techniques for combinatorial discovery of high temperature shape memory alloys. In: Acta Materialia, 61 (15). pp. 5735-5742.
Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2013) On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass. In: Acta Materialia, 61 (5). pp. 1558-1570.
Dutta, Jayanta and Ananthakrishna, G and Banerjee, S (2012) On the athermal nature of the beta to omega transformation. In: Acta Materialia, 60 (2). pp. 556-564.
Al-Samman, Talal and Molodov, Konstantin D and Molodov, Dmitri A and Gottstein, Guenter and Suwas, Satyam (2012) Softening and dynamic recrystallization in magnesium single crystals during c-axis compression. In: Acta Materialia, 60 (2). pp. 537-545.
Jacob, KT and Rajitha, G and Rannesh, L and Fukuyama, H and Waseda, Y (2012) Thermodynamics of Al(1-x)Ga(x)N solid solution: Inclination for phase separation and ordering. In: Acta Materialia, 60 (1). pp. 59-66.
Gorsse, S and Bellanger, P and Brechet, Y and Sellier, E and Umarji, A and Ail, Ujwala and Decourt, R (2011) Nanostructuration via solid state transformation as a strategy for improving the thermoelectric efficiency of PbTe alloys. In: Acta Materialia, 59 (19). pp. 7425-7437.
Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.
Srivastava, C and Chithra, S and Malviya, KD and Sinha, SK and Chattopadhyay, K (2011) Size dependent microstructure for Ag-Ni nanoparticles. In: Acta Materialia, 59 (16). pp. 6501-6509.
Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Miracle, DB and Srinivasan, R (2011) Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B. In: Acta Materialia, 59 (14). pp. 5494-5510.
Sarmah, Ritupan and Ananthakrishna, G and Sun, BA and Wang, WH (2011) Hidden order in serrated flow of metallic glasses. In: Acta Materialia, 59 (11). pp. 4482-4493.
Prasad, MJNV and Chokshi, AH (2011) Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni-P alloy. In: Acta Materialia, 59 (10). pp. 4055-4067.
Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2011) Deformation behaviour of commercially pure titanium at extreme strain rates. In: Acta Materialia, 59 (9). pp. 3431-3446.
Chakraborty, J and Kumar, Kishor and Ranjan, Rajeev and Chowdhury, Ghosh S and Singh, SR (2011) Thickness-dependent fcc-hcp phase transformation in polycrystalline titanium thin films. In: Acta Materialia, 59 (7). pp. 2615-2623.
Chithra, S and Lele, S and Chattopadhyay, K (2011) Structure evolution and phase change in Ag-5.1 at.% Bi alloy during mechanical alloying. In: Acta Materialia, 59 (5). pp. 2009-2019.
Prasad, S and Paul, A (2011) Growth mechanism of phases by interdiffusion and diffusion of species in the niobium-silicon system. In: Acta Materialia, 59 (4). pp. 1577-1585.
Suwas, Satyam and Beausir, B and Toth, LS and Fundenberger, JJ and Gottstein, G (2011) Texture evolution in commercially pure titanium after warm equal channel angular extrusion. In: Acta Materialia, 59 (3). pp. 1121-1133.
Paul, Arindam and Jayaram, Vikram (2011) Deformation and structural densification in Al2O3-Y2O3 glass. In: Acta Materialia, 59 (1). pp. 82-92.
Prasad, Eswar K and Chollacoop, N and Ramamurty, U (2011) Role of indenter angle on the plastic deformation underneath a sharp indenter and on representative strains: An experimental and numerical study. In: Acta Materialia, 59 (11). pp. 4343-4355.
Sen, Indrani and Gopinath, K and Datta, Ranjan and Ramamurty, U (2010) Fatigue in Ti-6Al-4V-B alloys. In: Acta Materialia, 58 (20). pp. 6799-6809.
Prasad, MJNV and Chokshi, AH (2010) Superplasticity in electrodeposited nanocrystalline nickel. In: Acta Materialia, 58 (17). pp. 5724-5736.
Mukherjee, M and Ramamurty, U and Garcia-Moreno, F and Banhart, J (2010) The effect of cooling rate on the structure and properties of closed-cell aluminium foams. In: Acta Materialia, 58 (15). pp. 5031-5042.
Viswanath, B and Shastry, VV and Ramamurty, U and Ravishankar, N (2010) Effect of calcium deficiency on the mechanical properties of hydroxyapatite crystals. In: Acta Materialia, 58 (14). pp. 4841-4848.
Biswas, Somjeet and Dhinwal, Satyaveer Singh and Suwas, Satyam (2010) Room-temperature equal channel angular extrusion of pure magnesium. In: Acta Materialia, 58 (9). pp. 3247-3261.
Azeem, MA and Tewari, A and Mishra, S and Gollapudi, S and Ramamurty, U (2010) Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy. In: Acta Materialia, 58 (5). pp. 1495-1502.
Gollerthan, S and Young, ML and Neuking, K and Ramamurty, U and Eggeler, G (2009) Direct physical evidence for the back-transformation of stress-induced martensite in the vicinity of cracks in pseudoelastic NiTi shape memory alloys. In: Acta Materialia, 57 (19). pp. 5892-5897.
Beausir, Benoit and Biswas, Somjeet and Kim, Dong Ik and Toth, Laszlo S and Suwas, Satyam (2009) Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. In: Acta Materialia, 57 (17). pp. 5061-5077.
Beausir, Benoit and Fressengeas, Claude and Gurao, Nilesh P and Toth, Laszlo S and Suwas, Satyam (2009) Spatial correlation in grain misorientation distribution. In: Acta Materialia, 57 (18). pp. 5382-5395.
Panicker, R and Chokshi, AH and Mishra, RK and Verma, R and Krajewski, PE (2009) Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy. In: Acta Materialia, 57 (13). pp. 3683-3693.
Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2009) Low cycle fatigue behaviour of a low interstitial Ni-base superalloy. In: Acta Materialia, 57 (12). pp. 3450-3459.
Raghavan, R and Murali, P and Ramamurty, U (2009) On factors influencing the ductile-to-brittle transition in a bulk metallic glass. In: Acta Materialia, 57 (11). pp. 3332-3340.
Gopinath, K and Gogia, AK and Kamat, SV and Ramamurty, U (2009) Dynamic strain ageing in Ni-base superalloy 720Li. In: Acta Materialia, 57 (4). pp. 1243-1253.
Bhattacharyya, Saswata and Abinandanan, TA (2009) Evolution of multivariant microstructures with anisotropic misfit: A phase field study. In: Acta Materialia, 57 (3). pp. 646-656.
Chirranjeevi, BG and Abinandanan, TA and Gururajan, MP (2009) A phase field study of morphological instabilities in multilayer thin films. In: Acta Materialia, 57 (4). pp. 1060-1067.
Ghosh, C and Paul, A (2009) Different phenomenological theories and their abilities to describe the interdiffusion process in a binary system during multiphase growth. In: Acta Materialia, 57 (2). pp. 493-502.
Tandaiya, Parag and Ramamurty, U and Ravichandran, G and Narasimhan, R (2008) Effect of Poisson's ratio on crack tip fields and fracture behavior of metallic glasses. In: Acta Materialia, 56 (20). pp. 6077-6086.
Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of $CaCu_3Ti_4O_{12}$ and phase relations in the system $CaO-CuO/Cu_2O-TiO_2$. In: Acta Materialia, 56 (17). pp. 4798-4803.
Jacob, Thomas K and Shekhar, Chander and Li, Xiaogan and Kale, Girish M (2008) Gibbs energy of formation of CaCu3Ti4O12 and phase relations in the system CaO-CUO/CU2O-TiO2. In: Acta Materialia, 56 (17). pp. 4798-4803.
Bose, Sangita and Bhattacharya, Victoria and Chattopadhyay, Kamanio and Ayyub, Pushan (2008) Proximity effect controlled superconducting behavior of novel biphasic Pb-Sn nanoparticles embedded in an Al matrix. In: Acta Materialia, 56 (16). pp. 4522-4528.
Datta, Aditi and Waghmare, UV and Ramamurty, U (2008) Structure and stacking faults in layered Mg–Zn–Y alloys:A first-principles study. In: Acta Materialia, 56 (11). pp. 2531-2539.
Beausir, Benoît and Satyam, Suwas and Tóth, László S and Neale, Kenneth W and Fundenberger, Jean-Jacques (2008) Analysis of texture evolution in magnesium during equal channel angular extrusion. In: Acta Materialia, 56 (2). pp. 200-214.
Kolluri, M and Mukherjee, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2008) Fatigue of a laterally constrained closed cell aluminum foam. In: Acta Materialia, 56 (5). 1114 - 1125.
Tandaiya, Parag and Narasimhan, R and Ramamurty, U (2007) Mode I crack tip fields in amorphous materials with application to metallic glasses. In: Acta Materialia, 55 (19). pp. 6541-6552.
Sen, Indrani and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2007) Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys. In: Acta Materialia, 55 (15). 4983 -4993.
Gururajana, MP and Abinandanan, TA (2007) Phase field study of precipitate rafting under a uniaxial stress. In: Acta Materialia, 55 (15). pp. 5015-5026.
Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.
Schuh, Christopher A and Hufnagel, Todd C and Ramamurty, Upadrasta (2007) Overview No.144 - Mechanical behavior of amorphous alloys. In: Acta Materialia, 55 (12). pp. 4067-4109.
Skrotzki, Werner and Scheerbaum, Nils and Oertel, Carl Georg and Arruffat-Massion, Roxane and Suwas, Satyam and Toth, Laszlo S (2007) Microstructure and texture gradient in copper deformed by equal channel angular pressing. In: Acta Materialia, 55 (6). pp. 2013-2024.
Skrotzki, W and Scheerbaum, N and Oertel, C-G and Brokmeier, H-G and Suwas, S and To'th, LS (2007) Recrystallization of high-purity aluminium during equal channel angular pressing. In: Acta Materialia, 55 (7). pp. 2211-2218.
Ghosh, C and Paul, A (2007) A physico-chemical approach in binary solid-state interdiffusion. In: Acta Materialia, 55 (6). pp. 1927-1939.
Lee, JY and Han, KH and Park, JM and Chattopadhyay, K and Kim, WT and Kim, DH (2006) Deformation and evolution of shear bands under compressive loading in bulk metallic glasses. In: Acta Materialia, 54 (19). pp. 5271-5279.
Srikant, G and Chollacoop, N and Ramamurty, U (2006) Plastic strain distribution underneath a Vickers Indenter: Role of yield strength and work hardening exponent. In: Acta Materialia, 54 (19). pp. 5171-5178.
Bhowmick, R and Raghavan, R and Chattopadhyay, K and Ramamurty, U (2006) Plastic flow softening in a bulk metallic glass. In: Acta Materialia, 54 (16). pp. 4221-4228.
Basu, Joysurya and Ranganathan, S (2006) Glass-forming ability and stability of ternary Ni-early transition metal (Ti/Zr/Hf) alloys. In: Acta Materialia, 54 (14). pp. 3637-3646.
Ranganathan, S and Inoue, A (2006) An application of Pettifor structure maps for the identification of pseudo-binary quasicrystalline intermetallics. In: Acta Materialia, 54 (14). pp. 3647-3656.
Ali, Rizwan and Mahapatraa, DR and Gopalakrishnan, S (2006) A quasi-three-dimensional approach to modeling and analysis of a constrained piezoelectric thin film. In: Acta Materialia, 54 (20). pp. 5529-5540.
Swaroop, Sathya and Kilo, Martin and Argirusis, Christos and Borchardt, Gunter and Chokshi, Atul H (2005) Lattice and grain boundary diffusion of cations in 3YTZ analyzed using SIMS. In: Acta Materialia, 53 (19). pp. 4975-4985.
Bhattacharya, Victoria and Yamasue, E and Ishihara, KN and Chattopadhyay, K (2005) On the origin and stability of the metastable phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix. In: Acta Materialia, 53 (17). pp. 4593-4603.
Phanikumar, Gandham and Biswas, Krishanu and Funke, Oliver and Holland-Moritz, Dirk and Herlach, Dieter M and Chattopadhyay, Kamanio (2005) Solidification of undercooled peritectic Fe-Ge alloy. In: Acta Materialia, 53 (13). pp. 3591-3600.
Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.
Murali, P and Ramamurty, U (2005) Embrittlement of a bulk metallic glass due to $sub- T_g$ annealing. In: Acta Materialia, 53 (5). pp. 1467-1478.
Chen, N and Louzguine, DV and Ranganathan, S and Inoue, A (2005) Formation ranges of icosahedral, amorphous and crystalline phases in rapidly solidified Ti-Zr-Hf-Ni alloys. In: Acta Materialia, 53 (3). pp. 759-764.
Ramamurty, U and Jana, S and Kawamura, Y and Chattopadhyay, K (2005) Hardness and plastic deformation in a bulk metallic glass. In: Acta Materialia, 53 (3). pp. 705-717.
Patnaik, MNM and Narasimhan, R and Ramamurty, U (2004) Spherical indentation response of metallic glasses. In: Acta Materialia, 52 (11). pp. 3335-3345.
Bhattacharya, Victoria and Chattopadhyay, K (2004) Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids. In: Acta Materialia, 52 (8). pp. 2293-2304.
Ramanarayan, H and Abinandanan, TA (2004) Grain boundary effects on spinodal decomposition II. Discontinuous microstructures. In: Acta Materialia, 52 (4). pp. 921-930.
Ramamurty, U and Paul, A (2004) Variability in mechanical properties of a metal foam. In: Acta Materialia, 52 (4). pp. 869-876.
Ramamurty, U and Kumaran, MC (2004) Mechanical property extraction through conical indentation of a closed-cell aluminum foam. In: Acta Materialia, 52 (1). pp. 181-189.
Ramanarayan, H and Abinandanan, TA (2003) Phase field study of grain boundary effects on spinodal decomposition. In: Acta Materialia, 51 (16). pp. 4761-4772.
Kok, S and Bharathi, MS and Beaudoin, AJ and Fressengeas, C and Ananthakrishna, G and Kubin, LP and Lebyodkin, M (2003) Spatial coupling in jerky flow using polycrystal plasticity. In: Acta Materialia, 51 (13). pp. 3651-3662.
Gandhi, AS and Jayaram, V (2003) Plastically deforming amorphous $ZrO_2-Al_2O_3$. In: Acta Materialia, 51 (6). pp. 1641-1649.
Madras, Giridhar and McCoy, Benjamin J (2003) Temperature effects for crystal growth: a distribution kinetics approach. In: Acta Materialia, 51 (7). pp. 2031-2040.
Swaminathan, S and Rao, Srinivasa B and Jayaram, V (2002) The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen. In: Acta Materialia, 50 (12). pp. 3093-3104.
Bharathi, MS and Lebyodkin, M and Ananthakrishna, G and Fressengeas, C and Kubin, LP (2002) The hidden order behind jerky flow. In: Acta Materialia, 50 (11). pp. 2813-2824.
Gandhi, AS and Jayaram, V (2002) Pressure consolidation of amorphous $ZrO_2–Al_2O_3$ by plastic deformation of powder particles. In: Acta Materialia, 50 (8). pp. 2137-2149.
Ullal, CK and Balasubramaniam, KR and Gandhi, AS and Jayaram, V (2001) Non-equilibrium phase synthesis in $Al_2O_3-Y_2O_3$ by spray pyrolysis of nitrate precursors. In: Acta Materialia, 49 (14). pp. 2691-2699.
Rao, Srinivasa B and Jayaram, V (2001) Pressureless Infiltration of Al–Mg Based Alloys into $Al_2O_3$ Preforms: Mechanisms and Phenomenology. In: Acta Materialia, 49 (13). pp. 2373-2385.
Kottada, RS and Chokshi, AH (2000) The High Temperature Tensile and Compressive Deformation Characteristics of Magnesia Doped Alumina. In: Acta Materialia, 48 (15). pp. 3905-3915.
Roy, Arun Y and Narasimhan, R and Arora, PR (1999) An Experimental Investigation Of Constraint Effects On Mixed Mode Fracture Initiation In A Ductile Aluminium Alloy. In: Acta Materialia, 47 (5). pp. 1587-1596.
Jayaram, V and Viswanathan, NN and Abinandanan, TA (1999) A dislocation pile-up model for the yield stress of a composite. In: Acta Materialia, 47 (5). pp. 1635-1643.
Hines, JA and Ikuhara, Y and Chokshi, AH and Sakuma, T (1998) The influence of trace impurities on the mechanical characteristics of a superplastic 2 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (15). pp. 5557-5568.
Abinandanan, TA and Haider, F and Martin, G (1998) Computer simulations of diffusional phase transformations: Monte Carlo algorithm and application to precipitation of ordered phases. In: Acta Materialia, 46 (12). pp. 4243-4255.
Goswami, R and Chattopadhyay, K and Ryder, PL (1998) Melting of Pb particles embedded in Cu-Zn matrices. In: Acta Materialia, 46 (12). pp. 4257-4271.
Chowdhury, Roy S and Narasimhan, R (1998) Ductile failure in a constrained metal layer under mixed mode loading. In: Acta Materialia, 46 (4). pp. 1103-1113.
Owen, DM and Chokshi, AH (1998) Final stage free sintering and sinter forging behavior of a yttria-stabilized tetragonal zirconia. In: Acta Materialia, 46 (02). pp. 719-729.
Owen, DM and Chokshi, AH (1998) The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia. In: Acta Materialia, 46 (02). pp. 667-679.
Singh, A and Ranganathan, S and Bendersky, LA (1997) Quasicrystalline phases and their approximants in Al-Mn-Zn alloys. In: Acta Materialia, 45 (12). pp. 5327-5336.
Srivastava, AK and Ranganathan, S (1996) Quasicrystals, crystals and multiple twins in rapidly solidified Al-Cr-Si, Al-Mn-Si and Al-Mn-Cr-Si alloys. In: Acta Materialia, 44 (7). pp. 2935-2946.
Goswami, R and Chattopadhyay, K (1996) The Solidification Behaviour of Bi Particles Embedded in an Al Matrix. In: Acta Materialia, 44 (6). pp. 2421-2429.
Hanabe, Murali and Jayaram, Vikram and Bhaskaran, TA (1996) Growth of $Al_2O_3/Al$ Composites from Al-Zn Alloys. In: Acta Materialia, 44 (2). pp. 819-829.
