Browse by IISc Authors

Jain, JV and Barnwal, VK and Kumar Saxena, A and Nair, PB and Yazar, KU and Suwas, S (2025) Predicting crack nucleation in commercially pure titanium using orientation imaging microscopy and machine learning. In: Materials Letters, 379 .

Mondal, S and Sen, M and Makineni, SK and Ghosh, P and Sarkar, A and Kapoor, R and Suwas, S (2025) Role of severe plastic deformation on mechanical behavior of irradiated materials: A case study with Nb-1Zr alloy. In: Journal of Nuclear Materials, 604 .

Agrawal, S and Avadhani, GS and Suwas, S (2024) Evolution of new topologically close-packed phases P and R upon long-term isothermal aging of laser powder bed fusion processed Hastelloy X. In: Journal of Alloys and Compounds, 1010 .

Ingale, T and Sen, M and Verma, KK and Godha, A and Reddy, ST and Balachandran, S and Suwas, S and Venkatesh, V and Banerjee, D (2024) Exploring microcrack formation in cyclic and dwell fatigue in MTR-lean Ti 6242 alloy. In: Acta Materialia, 281 .

Gupta, SK and Gugulothu, SB and Ivanov, E and Suwas, S and Chatterjee, K (2024) Additive manufacturing of a low modulus biomedical Ti�Nb�Ta�Zr alloy by directed energy deposition. In: Bioprinting, 41 .

Kumar, D and Shankar, G and Prashanth, KG and Suwas, S (2024) Control of texture and microstructure in additive manufacturing of stainless steel 316 L. In: Journal of Alloys and Compounds, 976 (976).

Mondal, S and Raghavendra, KG and Panigrahi, A and Nayan, N and Makineni, SK and Suwas, S (2024) Effect of Sc addition on evolution of microstructure, texture and strength of high-pressure torsion-processed AA2195 Al�Li alloy. In: Journal of Materials Science, 59 (14). pp. 5717-5735.

Uva Narayanan, C and Daniel, A and Praveenkumar, K and Manivasagam, G and Suwas, S and Prashanth, KG and Suya Prem Anand, P (2024) Effect of scanning speed on mechanical, corrosion, and fretting-tribocorrosion behavior of austenitic 316L stainless steel produced by laser powder bed fusion process. In: Journal of Manufacturing Processes, 131 . pp. 1582-1593.

Agrawal, S and Panigrahi, A and Avadhani, GS and Suwas, S (2024) Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099. In: Journal of Materials Science .

Balpande, AR and Agrawal, S and Li, X and Suwas, S and Guo, S and Ghosal, P and Nene, SS (2024) Excellent specific strength-ductility synergy in novel complex concentrated alloy after suction casting. In: Materials and Design, 242 .

Dutta, A and Gupta, SK and Gumaste, A and Haridas, RS and Suwas, S and Mishra, RS and Nene, SS (2024) Excellent work hardening ability in a novel compositionally complex alloy by hierarchical microstructuring. In: Applied Materials Today, 39 (102300).

Praveenkumar, K and Vishnu, J and Samuel S, C and Gopal, V and Arivarasu, M and Lackner, JM and Meier, B and Karthik, D and Suwas, S and Swaroop, S and Prashanth, KG and Yadav, MK and Manivasagam, G (2024) High temperature dry sliding wear behaviour of selective laser melted Ti-6Al-4V alloy surfaces. In: Journal of Materials Processing Technology, 329 .

Singh, N and Srikanth, KP and Gopal, V and Rajput, M and Manivasagam, G and Prashanth, KG and Chatterjee, K and Suwas, S (2024) In situ production of low-modulus Ti-Nb alloys by selective laser melting and their functional assessment toward orthopedic applications. In: Journal of Materials Chemistry B, 12 (24). pp. 5982-5993.

Suwas, S and Skrotzki, W and Scheerbaum, N and Grosdidier, T and Fundenberger, J-J and Tóth, LS and Brokmeier, H-G (2024) Multi-scale investigation of microstructure and texture evolution during equal channel angular pressing of silver. In: Journal of Materials Science .

Singh, VK and Jeevanaboina, K and Sahu, S and Bojjawar, G and Dova, K and Agarwal, S and Suwas, S and Makineni, SK and Ghosh, P (2024) On the Origin of Recovery-Induced Strengthening in CoCrNi Alloy. In: Advanced Engineering Materials .

Illarionov, AG and Karabanalov, MS and Shabanov, MA and Stepanov, SI and Soundappan, P and Raman, KHT and Suwas, S (2024) Structure and Properties of the Powder for Additive Synthesis of Alloys Based on Titanium Aluminide TiAl. In: Metal Science and Heat Treatment .

Vikram, RJ and Aramanda, SK and Schliephake, D and Kauffmann, A and Choudhury, A and Heilmaier, M and Suwas, S (2024) Unveiling the Intricacies of a Ductile-Phase Toughened Intermetallic: An In-Depth Exploration of a Eutectic Mo�Si�Ti Alloy and its Mechanical Behavior. In: Advanced Engineering Materials .

Vikram, RJ and Gokulnath, SA and Prashanth, KG and Suwas, S (2023) Effect of scanning strategy on microstructure and texture evolution in a selective laser melted Al-33Cu eutectic alloy. In: Journal of Alloys and Compounds, 936 .

Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2023) Micro-mechanisms underlying enhanced fatigue life of additively manufactured 316L stainless steel with a gradient heterogeneous microstructure. In: Materials Science and Engineering: A, 886 .

Yazar, KU and Bahl, S and Mishra, S and Sahu, VK and Bhattacharjee, A and Banerjee, D and Suwas, S (2023) Microcrack formation under normal and dwell fatigue of IMI 834. In: International Journal of Fatigue, 175 .

Verma, KK and Kumar, S and Suwas, S (2023) Control of Microstructure and Texture Through Strain Path Change to Improve Tensile Properties of Mg-6.9Sn-2.6Zn (TZ73) Alloy. In: JOM .

Vikram, RJ and Dash, K and Aramanda, SK and Suwas, S (2023) Design of a nickel–cobalt based eutectic high entropy alloy (NiCo)1.7AlCrFe with hierarchical microstructural length scales. In: Philosophical Magazine .

Mahadule, D and Kumar, D and Dandekar, TR and Khatirkar, RK and Suwas, S (2023) Modelling of flow stresses during hot deformation of Ti–6Al–4Mo–1V–0.1Si alloy. In: Journal of Materials Research .

Dandekar, TR and Kumar, A and Khatirkar, RK and Kumar, D and Suwas, S (2023) Effect of microstructure and texture on the evolution of mechanical properties in a cold rolled and annealed UNS S32101 lean duplex stainless steel sheet. In: Materials Chemistry and Physics, 299 .

Maurya, HS and Vikram, RJ and Kosiba, K and Juhani, K and Sergejev, F and Suwas, S and Prashanth, KG (2023) Additive manufacturing of CMCs with bimodal microstructure. In: Journal of Alloys and Compounds, 938 .

Baruah, D and Vaishakh, KV and Sreedhar, SA and Gupta, SK and Suwas, S and Narasimhan, R (2023) Notch sensitivity of combined mode I–II fracture behaviour of a rolled magnesium alloy. In: Philosophical Magazine Letters, 103 (1).

Illarionov, AG and Stepanov, SI and Naschetnikova, IA and Popov, AA and Soundappan, P and Thulasi Raman, KH and Suwas, S (2023) A Review—Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb. In: Materials, 16 (3).

Bojjawar, G and Suwas, S and Chokshi, AH (2023) The Effect of Texture on the Hall-Petch Relationship in Severely Drawn Ni-Co Microwires. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Dixit, S and Kumar, D and Dash, BB and Suwas, S and Bhattacharjee, A and Sankaran, S (2022) Effect of solutionizing temperature and cooling rate on phase morphology, recrystallization and texture evolution in a heat treated Ti‐6Al‐4Valloy having different types of microstructure. In: Journal of Alloys and Compounds, 927 .

Sankaran, S and Madhavan, R and Suwas, S and Ray, RK and Padmanabhan, KA (2022) Microstructural evolution and stability during strain-controlled fatigue in a multiphase microalloyed steel. In: Materials Science and Engineering A, 861 .

Roy, S and Sharma, A and Chaudhuri, A and Huang, Y and Langdon, TG and Suwas, S (2022) Microstructure evolution and mechanical response of a boron-modified Ti–6Al–4V alloy during high-pressure torsion processing. In: Materials Science and Engineering A, 860 .

Sreedhar, SA and Baruah, D and Shankar, G and Suwas, S and Narasimhan, R (2022) Temperature dependence of mode I fracture behaviour of a textured magnesium alloy. In: International Journal of Fracture, 238 (2). pp. 89-114.

Yazar, KU and Bhattacharjee, A and Suwas, S (2022) Effect of Thermomechanical Processing on the Dwell Fatigue Behaviour of Near Alpha Titanium Alloy IMI 834. In: JOM .

Kalsar, R and Sanamar, S and Schell, N and Brokmeier, H-G and Saha, R and Ghosh, P and Suwas, S (2022) In-situ study of tensile deformation behaviour of medium Mn TWIP/TRIP steel using synchrotron radiation. In: Materials Science and Engineering A, 857 .

Soni, R and Jhavar, S and Tyeb, S and Gupta, SK and Suwas, S and Chatterjee, K (2022) Wire Arc Additive Manufacturing of Zinc as a Degradable Metallic Biomaterial. In: Journal of Functional Biomaterials, 13 (4).

Bojjawar, G and Suwas, S and Chokshi, AH (2022) Influence of Co content on the simultaneous enhancement of strength and ductility in severely drawn textured Ni-Co microwires. In: Philosophical Magazine Letters .

Vikram, RJ and Verma, SK and Dash, K and Fabijanic, D and Murty, BS and Suwas, S (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Arya, A and Suwas, S and Chokshi, AH (2022) Strengthening in tension and weakening in torsion in drawn nickel microwires. In: Materials Science and Engineering A, 856 .

Roy, A and Gupta, SK and Suwas, S and Chatterjee, K (2022) The Significance of Crystallographic Texture in Dry Etching of Titanium to Engineer Bioinspired Nanostructured Bactericidal Surfaces. In: JOM .

Acharya, S and Gopal, V and Gupta, SK and Nilawar, S and Manivasagam, G and Suwas, S and Chatterjee, K (2022) Anisotropy of Additively Manufactured Co-28Cr-6Mo Influences Mechanical Properties and Biomedical Performance. In: ACS Applied Materials and Interfaces, 14 . pp. 21906-21915.

Aashranth, B and Shankar, G and Samantaray, D and Suwas, S (2022) The Role of Hot Deformation Texture on Dynamic Transformation of Austenite to Ferrite in a 9%Cr Alloy Steel. In: JOM .

Sabban, R and Dash, K and Suwas, S and Murty, BS (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. In: Journal of the Indian Institute of Science .

Suntharavel Muthaiah, VM and Rajput, M and Tripathi, A and Suwas, S and Chatterjee, K (2022) Electrophoretic Deposition of Nanocrystalline Calcium Phosphate Coating for Augmenting Bioactivity of Additively Manufactured Ti-6Al-4V. In: ACS Materials Au, 2 (2). pp. 132-142.

Shankar, G and Singh, VK and Chepuri, A and Vengatesan, B and Suwas, S (2022) Influence of Pre-strain on the Cementite Spheroidization of 22MnB5 Steel and Its Effect on Mechanical Properties. In: Journal of Materials Engineering and Performance .

Nadammal, N and Rajput, M and Gupta, SK and Ivanov, E and Reddy, AS and Suwas, S and Chatterjee, K (2022) Laser Powder Bed Fusion Additive Manufacturing of a Low-Modulus Ti-35Nb-7Zr-5Ta Alloy for Orthopedic Applications. In: ACS Omega, 7 (10). pp. 8506-8517.

Pramanik, S and Suwas, S (2022) Microstructure and Crystallographic Texture Evolution during Isothermal Annealing of Cold-Rolled Fe-6.8Al Low-Density Steel. In: Journal of Materials Engineering and Performance .

Panigrahi, A and Acharya, TS and Sengupta, P and Kumar, D and Sarangi, L and Kumar, N and Debasish, D and Suwas, S and Basu, S and Debata, M (2022) Microstructure and mechanical properties of novel tungsten heavy alloys prepared using FeNiCoCrCu HEA as binder. In: Materials Science and Engineering A, 832 .

Pramodh, NV and Verma, KK and Kumar, S and Suwas, S (2022) Asymmetric and Reverse Rolling of AM30 Mg Alloy to Improve Its Tensile Properties. In: Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, 27 Feb - 3 Mar 2022, Anaheim, pp. 217-225.

Bibhanshu, N and Prasad, N and Nayan, N and Avadhani, GS and Ray, RK and Suwas, S (2022) Mechanical response of as-cast equiatomic high entropy alloy CuFeCoNiMn. In: Intermetallics, 143 .

Edalati, K and Bachmaier, A and Beloshenko, VA and Beygelzimer, Y and Blank, VD and Botta, WJ and Bry�a, K and �ížek, J and Divinski, S and Enikeev, NA and Estrin, Y and Faraji, G and Figueiredo, RB and Fuji, M and Furuta, T and Grosdidier, T and Gubicza, J and Hohenwarter, A and Horita, Z and Huot, J and Ikoma, Y and Jane�ek, M and Kawasaki, M and Král, P and Kuramoto, S and Langdon, TG and Leiva, DR and Levitas, VI and Mazilkin, A and Mito, M and Miyamoto, H and Nishizaki, T and Pippan, R and Popov, VV and Popova, EN and Purcek, G and Renk, O and Révész, � and Sauvage, X and Sklenicka, V and Skrotzki, W and Straumal, BB and Suwas, S and Toth, LS and Tsuji, N and Valiev, RZ and Wilde, G and Zehetbauer, MJ and Zhu, X (2022) Nanomaterials by severe plastic deformation: review of historical developments and recent advances. In: Materials Research Letters, 10 (4). pp. 163-256.

Muthaiah, VMS and Indrakumar, S and Suwas, S and Chatterjee, K (2022) Surface engineering of additively manufactured titanium alloys for enhanced clinical performance of biomedical implants: A review of recent developments. In: Bioprinting, 25 .

Yazar, KU and Mishra, S and Kumar, L and Bahl, S and Kumar, TK and Suwas, S (2022) Texture induced planar anisotropy of dwell fatigue response in titanium: Insights from experiments and crystal plasticity simulations. In: International Journal of Plasticity, 152 .

Ramdas Dandekar, T and Kisni Khatirkar, R and Kumar, A and Bibhanshu, N and Suwas, S (2022) Unidirectional cold rolling of Fe-21Cr-5Mn-1.5Ni alloy � Microstructure, texture and magnetic properties. In: Journal of Magnetism and Magnetic Materials, 549 .

Ghosh, S and Tippireddy, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Malladi, SRK and Murty, BS and Suwas, S and Mallik, RC (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. In: Journal of Alloys and Compounds, 880 .

Schmidt, S and Sathiaraj, GD and Kumar, SS and Sulkowski, B and Suwas, S and Jaschinski, J and Pukenas, A and Gu, B and Skrotzki, W (2021) Effect of rolling and annealing temperature on the mechanical properties of CrMnFeCoNi high-entropy alloy. In: Materials Chemistry and Physics, 270 .

Vikram, RJ and Gupta, K and Suwas, S (2021) Design of a new cobalt base nano-lamellar eutectic high entropy alloy. In: Scripta Materialia, 202 .

Verma, KK and Kumar, S and Suwas, S (2021) Evolution of microstructure and texture during hot rolling and subsequent annealing of the TZ73 magnesium alloy and its influence on tensile properties. In: Materials Science and Engineering A, 821 .

Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2021) Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. In: Materials Science and Engineering A, 820 .

Kumar, D and Shankar, G and Prashanth, KG and Suwas, S (2021) Texture dependent strain hardening in additively manufactured stainless steel 316L. In: Materials Science and Engineering A, 820 .

Gupta, SK and Shahidsha, N and Bahl, S and Kedaria, D and Singamneni, S and Yarlagadda, PKDV and Suwas, S and Chatterjee, K (2021) Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates. In: Journal of the Mechanical Behavior of Biomedical Materials, 119 .

Behera, M and Rajput, M and Acharya, S and Nadammal, N and Suwas, S and Chatterjee, K (2021) Zinc and cerium synergistically enhance the mechanical properties, corrosion resistance, and osteogenic activity of magnesium as resorbable biomaterials. In: Biomedical Materials (Bristol), 16 (4).

Acharya, S and Soni, R and Suwas, S and Chatterjee, K (2021) Additive manufacturing of Co�Cr alloys for biomedical applications: A concise review. In: Journal of Materials Research .

Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Chandra Mallik, R (2021) Thermoelectric properties enhancement of Ba0·2Co4Sb12 through dispersion of GaSb inclusions. In: Physica B: Condensed Matter .

Suresh, M and Kalsar, R and More, AM and Bisht, A and Nayan, N and Suwas, S (2021) Evolution of microstructure and texture in the third generation Al�Li alloy AA2195 during warm hybrid processing. In: Journal of Alloys and Compounds, 855 .

Sreedhar S, A and Ravindran, S and Shankar, G and Suwas, S and Narasimhan, R (2021) Fracture mechanism and toughness of a rolled magnesium alloy under dynamic loading. In: Acta Materialia, 202 . pp. 350-365.

Mishra, S and Suresh, M and More, AM and Bisht, A and Nayan, N and Suwas, S (2021) Texture control to reduce yield strength anisotropy in the third generation aluminum-copper-lithium alloy: Experiments and modeling. In: Materials Science and Engineering A, 799 .

Bahl, S and Suwas, S and Chatterjee, K (2021) Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials. In: International Materials Reviews, 66 (2). pp. 114-139.

Bibhanshu, N and Shankar, G and Suwas, S (2021) Hot deformation and softening response in boronmodified two�phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .

Kumar, D and Jhavar, S and Arya, A and Prashanth, KG and Suwas, S (2021) Mechanisms controlling fracture toughness of additively manufactured stainless steel 316L. In: International Journal of Fracture .

Acharya, S and Suwas, S and Chatterjee, K (2021) Review of recent developments in surface nanocrystallization of metallic biomaterials. In: Nanoscale, 13 (4). pp. 2286-2301.

Dandekar, TR and Khatirkar, RK and Gupta, A and Bibhanshu, N and Bhadauria, A and Suwas, S (2021) Strain rate sensitivity behaviour of Fe�21Cr-1.5Ni�5Mn alloy and its constitutive modelling. In: Materials Chemistry and Physics, 271 .

Gupta, A and Khatirkar, RK and Kumar, A and Thool, KS and Bhibhanshu, N and Suwas, S (2021) Texture Development During Cold Rolling of a β-Ti Alloy: Experiments and Simulations. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Kalsar, R and Madhavan, R and Suwas, S (2021) Texture evolution in platinum: the role of non-octahedral slip. In: Philosophical Magazine Letters .

Yazar, KU and Shamitha, M and Suwas, S (2021) Texture-dependent dwell fatigue response of titanium. In: Philosophical Magazine, 101 (12). pp. 1443-1470.

Singh, N and Acharya, S and Prashanth, KG and Chatterjee, K and Suwas, S (2021) Ti6Al7Nb-based TiB-reinforced composites by selective laser melting. In: Journal of Materials Research .

Aashranth, B and Shankar, G and Davinci, MA and Samantaray, D and Borah, U and Suwas, S (2021) The effect of crystallographic orientation and interfaces on thermo-mechanical softening of a martensitic steel. In: Journal of Materials Research .

Shankar, G and Raguraman, S and Barrales Mora, LA and Suwas, S (2020) Development of Recrystallization Texture in Commercially Pure Titanium: Experiments and Simulation. In: JOM, 72 (12). pp. 4559-4573.

Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Preferential phonon scattering and low energy carrier filtering by interfaces of: In situ formed InSb nanoprecipitates and GaSb nanoinclusions for enhanced thermoelectric performance of In0.2Co4Sb12. In: Dalton Transactions, 49 (44). pp. 15883-15894.

Ghosh, S and Shankar, G and Karati, A and Werbach, K and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Enhanced Thermoelectric Performance in the Ba0.3Co4Sb12/InSb Nanocomposite Originating from the Minimum Possible Lattice Thermal Conductivity. In: ACS Applied Materials and Interfaces, 12 (43). pp. 48729-48740.

Kalsar, R and Yadav, D and Sharma, A and Brokmeier, HG and May, J and Höppel, HW and Skrotzki, W and Suwas, S (2020) Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys. In: Materials Science and Engineering A, 797 .

Dash, K and Yazar, KU and Chattopadhyay, K and Suwas, S (2020) Graded microstructure and texture in ultrafine grained multi-layered immiscible bimetallic system. In: Materialia, 13 .

Shankar, G and Madhavan, R and Kumar, R and Sahoo, B and Ray, RK and Suwas, S (2020) Micro-mechanism of evolution of microstructure and texture in Ni-Fe alloys. In: Materialia, 13 .

Kalsar, R and Madhavan, R and Ray, RK and Suwas, S (2020) Texture transition in Al�Mg alloys: effect of magnesium. In: Philosophical Magazine, 100 (16). pp. 2143-2164.

Bibhanshu, N and Bhattacharjee, A and Suwas, S (2020) Hot deformation response of titanium aluminides Ti�45Al-(5, 10)Nb-0.2B-0.2C with pre-conditioned microstructures. In: Journal of Alloys and Compounds, 832 .

Acharya, S and Mishra, S and Yazar, KU and Chatterjee, K and Suwas, S (2020) Evolution of Deformation Texture in Low Modulus β Ti-34Nb-2Ta-(0, 3)Zr-0.5O Alloys. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4045-4058.

Mishra, S and Yazar, KU and More, AM and Kumar, L and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Elucidating the deformation modes in incremental sheet forming process: Insights from crystallographic texture, microstructure and mechanical properties. In: Materials Science and Engineering A, 790 .

Bibhanshu, N and Suwas, S (2020) Mechanism of shear band formation and dynamic softening in a two-phase (α2 + γ) titanium aluminide. In: Journal of Materials Research, 35 (13). pp. 1635-1646.

Bisht, A and Kumar, S and Pang, KH and Zhou, A and Roy, A and Silberschmidt, VV and Suwas, S (2020) Shear band widening mechanism in Ti-6Al-4V under high strain rate deformation. In: Journal of Materials Research, 35 (13). pp. 1623-1634.

Pramanik, S and Suwas, S (2020) Effect of Cr and Mn Addition on the Microstructure, Texture, and Mechanical Properties of Ternary Low-Density Steels. In: Journal of Materials Engineering and Performance, 29 (7). pp. 4435-4445.

Vaishakh, KV and Narasimhan, R and Yazar, KU and Suwas, S (2020) Mixed-mode (I and II) fracture behavior of a basal-textured magnesium alloy. In: Acta Materialia, 193 . pp. 99-114.

Vikram, RJ and Murty, BS and Fabijanic, D and Suwas, S (2020) Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1. In: Journal of Alloys and Compounds, 827 .

Zhou, R and Pang, KH and Bisht, A and Roy, A and Suwas, S and Silberschmidt, VV (2020) Modelling strain localization in Ti–6Al–4V at high loading rate: A phenomenological approach. In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 378 (2162).

Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .

Acharya, S and Panicker, AG and Gopal, V and Dabas, SS and Manivasagam, G and Suwas, S and Chatterjee, K (2020) Surface mechanical attrition treatment of low modulus Ti-Nb-Ta-O alloy for orthopedic applications. In: Materials Science and Engineering C, 110 .

More, AM and Kalsar, R and Shivashankar, P and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Incremental Forming of the Al-Li Alloy AA2195: Role of Texture and Microstructure. In: JOM, 72 (4). pp. 1647-1655.

Perugu, CS and Kumar, S and Suwas, S (2020) Evolution of Microstructure, Texture, and Tensile Properties in Two-Phase Mg-Li Alloys: Effect of Zn Addition. In: JOM, 72 (4). pp. 1627-1637.

Mukherjee, S and Chetty, R and Madduri, PVP and Nayak, AK and Wojciechowski, K and Ghosh, T and Chattopadhyay, K and Suwas, S and Mallik, RC (2020) Reply to the ‘Comment on “Investigation on the structure and thermoelectric properties of CuxTe binary compounds”’ by A. H. Barajas-Aguilar, A. M. Garay-Tapia, and S. J. Jiménez-Sandoval,Dalton Trans., 2020, 49, DOI: 10.1039/C9DT03607E. In: Dalton Transactions, 49 (17). pp. 5738-5740.

Kar, A and Kailas, SV and Suwas, S (2020) Mechanism of variation in high-temperature grain stability of aluminum in dissimilar friction stir welds. In: Materials Performance and Characterization, 9 (2).

Verma, KK and Suwas, S and Kumar, S (2020) Asymmetric Rolling of TZ73 Magnesium Alloy to Improve Its Ductility. In: Magnesium Technology Symposium held at the 149th Annual Meeting and Exhibition, 23 February 2020 through 27 February 2020, San Diego; United States, pp. 189-196.

Skrotzki, W and Dan Sathiaraj, G and Kalsar, R and Suwas, S (2020) Effect of stacking fault energy on microstructure and texture evolution during the rolling of non-equiatomic crmnfeconi high-entropy alloys. In: Crystals, 10 (7). pp. 1-12.

Kalsar, R and Sanamar, S and Schell, N and Brokmeier, H G and Saha, R and Ghosh, P and Bhagat, A N and Suwas, S (2020) Elemental partitioning in medium Mn steel during short-time annealing: An in-situ study using synchrotron x-rays. In: Materialia, 9 .

Kar, A and Kailas, SV and Suwas, S (2020) Formation sequence of intermetallics and kinetics of reaction layer growth during solid state reaction between titanium and aluminum. In: Materialia, 11 (100702).

Bibhanshu, N and Shankar, G and Suwas, S (2020) Hot deformation and softening response in boron-modified two-phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .

Yazar, KU and Mishra, S and Karmakar, A and Bhattacharjee, A and Suwas, S (2020) On the Temperature Sensitivity of Dwell Fatigue of a Near Alpha Titanium Alloy: Role of Strain Hardening and Strain Rate Sensitivity. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .

Mishra, S and Yazar, KU and Kar, A and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (1). pp. 151-166.

Bisht, A and Neogi, A and Mitra, N and Jagadeesh, G and Suwas, S (2019) Investigation of the elastically shock-compressed region and elastic-plastic shock transition in single-crystalline copper to understand the dislocation nucleation mechanism under shock compression. In: SHOCK WAVES, 29 (7). pp. 913-927.

Vikram, RJ and Gaddam, S and Kalsar, R and Acharya, S and Suwas, S (2019) A fractal approach to predict the oxidation and corrosion behavior of a grain boundary engineered low SFE high entropy alloy. In: Materialia, 7 .

Athreya, C N and Suwas, S and Sarma, V Subramanya (2019) Role of stress state on dynamic recrystallization behaviour of Ni during hot deformation: Analysis of uniaxial compression and plane strain compression. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 763 .

Bisht, A and Kamble, N and Kumar, L and Avadhani, GS and Roy, A and Silberschmidt, V and Suwas, S (2019) Deformation response and microstructural evolution of as-cast Mg alloys AM30 and AM50 during hot compression. In: International Journal of Materials Research, 110 (6). pp. 524-533.

Pramanik, S and Pund, TS and Avadhani, GS and Suwas, S (2019) Hot deformation behavior of Fe-6.8Al low-density and AISI 1040 steels. In: Materials Performance and Characterization, 8 (5).

Suresh, M and Sharma, A and More, AM and Kalsar, R and Bisht, A and Nayan, N and Suwas, S (2019) Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195. In: JOURNAL OF ALLOYS AND COMPOUNDS, 785 . pp. 972-983.

Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .

Sharma, A and Mohan, S and Suwas, S (2019) Evidence of adaptive modulation and magnetic field induced reorientation of variants in epitaxially grown Ni-Mn-Ga thin film on Al 2 O 3 (112¯0) substrate. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 242 . pp. 6-16.

Sharma, A and Mohan, S and Suwas, S (2019) Evidence of adaptive modulation and magnetic field induced reorientation of variants in epitaxially grown Ni-Mn-Ga thin film on Al 2 O 3 (112¯0) substrate. In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 242 . pp. 6-16.

Sathiaraj, GD and Kalsar, R and Kumar, SSS and Suwas, S and Skrotzki, W (2019) Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy. In: 2019 International Conference on Materials and Manufacturing Methods, MMM 2019, 5-7 July 2019, Tiruchirapalli; India, pp. 2147-2151.

Tekumalla, S and Bibhanshu, N and Suwas, S and Gupta, M (2019) Superior ductility in magnesium alloy-based nanocomposites: the crucial role of texture induced by nanoparticles. In: Journal of Materials Science .

Sabat, RK and Brahme, AP and Mishra, RK and Inal, K and Suwas, S (2018) Ductility enhancement in Mg-0.2%Ce alloys. In: ACTA MATERIALIA, 161 . pp. 246-257.

Bahl, S and Dryepondt, S and Allard, LF and Suwas, S and Shyam, A (2018) Retardation of Small Creep-Fatigue Crack in Gr. 91 Steel Through the Combined Effects of Stress Relaxation, Microstructural Evolution, and Oxidation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6110-6121.

Kumar, A and Gupta, A and Khatirkar, RK and Bibhanshu, N and Suwas, S (2018) Strain rate sensitivity behaviour of a chrome-nickel austentic-ferritic stainless steel and its constitutive modelling. In: ISIJ International, 58 (10). pp. 1840-1849.

Bisht, A and Yadav, V and Suwas, S and Dixit, U S (2018) Deformation Behavior of AM30 Magnesium Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (9). pp. 4900-4910.

Bai, W and Bisht, A and Roy, A and Suwas, S and Sun, R and Silberschmidt, VV (2018) Effect of hybrid machining on structural integrity of aerospace-grade materials. In: 8th CIRP Conference on High Performance Cutting, HPC 2018, 25 - 27 June 2018, Budapest, pp. 163-166.

Acharya, S and Bahl, S and Chatterjee, K and Suwas, S (2018) Variant selection in metastable β Ti-V-Fe-Al alloy during triaxial and uniaxial compression. In: Materialia, 4 . pp. 20-32.

Mukherjee, S and Ramakrishnan, A and Chen, K-H and Chattopadhyay, K and Suwas, S and Mallik, RC (2018) Tuning the thermoelectric properties of chalcopyrite by Co and Se double substitution. In: 63rd DAE Solid State Physics Symposium 2018, DAE-SSPS 2018, 18 - 22 December 2018, Hisar, Haryana.

Kumar, A and Gupta, A and Khatirkar, RK and Suwas, S (2018) Texture development during cross rolling of a dual-phase Fe–Cr–Ni alloy: experiments and simulations. In: Philosophical Magazine Letters, 98 (1). pp. 17-26.

Singh, P Bhagat and Sabat, R K and Kumaran, S and Suwas, S (2018) Effect of Aluminum Addition on the Evolution of Microstructure, Crystallographic Texture and Mechanical Properties of Single Phase Hexagonal Close Packed Mg-Li Alloys. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (2). pp. 864-874.

Bahl, S and Krishnamurthy, AS and Suwas, S and Chatterjee, K (2017) Controlled nanoscale precipitation to enhance the mechanical and biological performances of a metastable β Ti-Nb-Sn alloy for orthopedic applications. In: Materials and Design, 126 . pp. 226-237.

Prasad, N Subrahmanya and Narasimhan, R and Suwas, S (2017) Effects of lattice orientation and crack tip constraint on ductile fracture initiation in Mg single crystals. In: INTERNATIONAL JOURNAL OF PLASTICITY, 97 . pp. 222-245.

Behera, AN and Chaudhuri, A and Kapoor, R and Chakravartty, JK and Suwas, S (2016) High temperature deformation behavior of Nb-1 wt.%Zr alloy. In: MATERIALS & DESIGN, 92 . pp. 750-759.

Madhavan, R and Ray, RK and Suwas, S (2016) Micro-mechanical aspects of texture evolution in nickel and nickel-cobalt alloys: role of stacking fault energy. In: PHILOSOPHICAL MAGAZINE, 96 (30, A). pp. 3177-3199.

Madhavan, R and Suwas, S (2016) Micro-mechanisms of deformation texture evolution in nanocrystalline nickel-cobalt alloys. In: ACTA MATERIALIA, 121 . pp. 46-58.

Prasad, Subrahmanya N and Narasimhan, R and Suwas, S (2016) Numerical simulations of cylindrical void growth in Mg single crystals. In: Symposium on Ductile Failure and Localization, MAR 17-20, 2016, Maison Polytechniciens, Paris, FRANCE, pp. 159-183.

Santra, S and Makineni, S K and Suwas, S and Chattopadhyay, K and Paul, A (2016) Role of Ti on growth, morphology and microtexture evolution of A15-based V3Ga superconductor by bronze technique. In: MATERIALS & DESIGN, 110 . pp. 404-413.

Suresh, M and Sharma, A and More, A M and Nayan, N and Suwas, S (2015) Effect of Scandium addition on evolution of microstructure, texture and mechanical properties of thermo-mechanically processed Al-Li alloy AA2195. In: JOURNAL OF ALLOYS AND COMPOUNDS, 740 . pp. 364-374.

Madhavan, R and Suwas, S (2015) Evolution of deformation texture and magnetic properties in a nanocrystalline nickel-20 wt% cobalt alloy. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 378 . pp. 239-245.

Prasad, Subrahmanya N and Kumar, Naveen N and Narasimhan, R and Suwas, S (2015) Fracture behavior of magnesium alloys - Role of tensile twinning. In: ACTA MATERIALIA, 94 . pp. 281-293.

Athreya, CN and Suwas, S and Sarma, Subramanya V (2015) Influence of mode of deformation on microstructural heterogeneities in Ni subjected to large strain deformation. In: PHILOSOPHICAL MAGAZINE LETTERS, 95 (9). pp. 441-449.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Almajid, A and Gupta, M (2015) Mg/BN nanocomposites: Nano-BN addition for enhanced room temperature tensile and compressive response. In: JOURNAL OF COMPOSITE MATERIALS, 49 (24). pp. 3045-3055.

Madhavan, R and Kalsar, R and Ray, RK and Suwas, S (2015) Role of stacking fault energy on texture evolution revisited. In: 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM 17), AUG 24-29, 2014, Dresden, GERMANY.

Chaudhuri, A and Behera, AN and Kapoor, R and Sarkar, A and Chakravartty, JK and Suwas, S (2015) Texture evolution during hot deformation of Moly-TZM. In: 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (I, AUG 24-29, 2014, Dresden, GERMANY.

Chetty, R and Bali, A and Naik, MH and Rogl, G and Rogl, P and Jain, M and Suwas, S and Mallik, RC (2015) Thermoelectric properties of Co substituted synthetic tetrahedrite. In: ACTA MATERIALIA, 100 . pp. 266-274.

Manivasagam, G and Suwas, S (2014) Biodegradable Mg and Mg based alloys for biomedical implants. In: MATERIALS SCIENCE AND TECHNOLOGY, 30 (5). pp. 515-520.

Suwas, S and Gurao, NP (2014) Development of Microstructures and Textures by Cross Rolling. [Book Chapter]

Bahl, S and Raj, S and Vanamali, S and Suwas, S and Chatterjee, K (2014) Effect of boron addition and processing of Ti-6Al-4V on corrosion behaviour and biocompatibility. In: MATERIALS TECHNOLOGY, 29 (B1, SI). B64-B68.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2014) Effect of nanoscale boron carbide particle addition on the microstructural evolution and mechanical response of pure magnesium. In: MATERIALS & DESIGN, 56 . pp. 428-436.

Pramanik, S and Suwas, S and Ray, RK (2014) Influence of crystallographic texture and microstructure on elastic modulus of steels. In: CANADIAN METALLURGICAL QUARTERLY, 53 (3). pp. 274-281.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2014) Microstructural evolution and mechanical properties of Mg composites containing nano-B4C hybridized micro-Ti particulates. In: MATERIALS CHEMISTRY AND PHYSICS, 143 (3). pp. 1178-1190.

Sankaranarayanan, S and Nayak, Pranav U and Sabat, RK and Suwas, S and Almajid, A and Gupta, M (2014) Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response. In: JOURNAL OF ALLOYS AND COMPOUNDS, 615 . pp. 211-219.

Madhavan, R and Ray, RK and Suwas, S (2014) New insights into the development of microstructure and deformation texture in nickel-60 wt.% cobalt alloy. In: ACTA MATERIALIA, 78 . pp. 222-235.

Panda, S and Sahoo, SK and Dash, A and Bagwan, M and Kumar, G and Mishra, SC and Suwas, S (2014) Orientation dependent mechanical properties of commercially pure (cp) titanium. In: MATERIALS CHARACTERIZATION, 98 . pp. 93-101.

Madhavan, R and Ray, RK and Suwas, S (2014) Texture transition in cold-rolled nickel-40 wt.% cobalt alloy. In: ACTA MATERIALIA, 74 . pp. 151-164.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Walker, Stefan and Suwas, S and Gupta, M (2014) Using heat treatment effects and EBSD analysis to tailor microstructure of hybrid Mg nanocomposite for enhanced overall mechanical response. In: MATERIALS SCIENCE AND TECHNOLOGY, 30 (11). pp. 1309-1320.

Sankaranarayanan, S and Sabat, RK and Jayalakshmi, S and Suwas, S and Gupta, M (2013) Effect of hybridizing micron-sized Ti with nano-sized SiC on the microstructural evolution and mechanical response of Mg-5.6Ti composite. In: Journal of Alloys and Compounds, 575 . pp. 207-217.

Suresh, KS and Kumar, N and Mishra, RS and Suwas, S (2013) Evolution of microstructure and texture in friction stir processed Al-Mg-Mn alloy. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013, Sydney, AUSTRALIA, pp. 247-250.

Mallik, RC and Anbalagan, R and Rogl, G and Royanian, E and Heinrich, P and Bauer, E and Rogl, P and Suwas, S (2013) Thermoelectric properties of Fe(0.2)Co(3.8)Sbi(12-x)Te(x) skutterudites. In: ACTA MATERIALIA, 61 (18). pp. 6698-6711.

Suresh, KS and Geetha, M and Richard, C and Landoulsi, J and Ramasawmy, H and Suwas, S and Asokamani, R (2012) Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 32 (4). pp. 763-771.