ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 68.

Conference Proceedings

Maiya, MP and Kumar, K and Hafner, A and Banasiak, K and Neksa, P and Kumar, P and Singh, S (2019) Experimental analysis of transcritical CO2 booster refrigeration system with heat recovery and ejector expansion. In: 25th IIR International Congress of Refrigeration, ICR 2019, 24 August 2019 - 30 August 2019, Montreal, pp. 1467-1474.

Conference Paper

Sankar, B and Saravanan, M and Kumar, K and Dubakka, S (2023) Transforming Pixels into a Masterpiece: AI-Powered Art Restoration using a Novel Distributed Denoising CNN (DDCNN). In: 3rd International Conference on Emerging Techniques in Computational Intelligence, ICETCI 2023, 21-23 septembar 2023, Hyderabad, pp. 164-175.

Rao, A and Kumar, K and Raghavan, S (2022) Modeling and Experimental Evidence of the Effect of Concentration Gradients on the Surface Processes during CVD Growth of MoS2. In: 5th IEEE International Conference on Emerging Electronics, ICEE 2020, 26 - 28 November 2020, New Delhi.

Pradeep, R and Thianesh, UK and Prabhu, R and Kumar, K and Rajaram Perumal, M and Sumanth Eswar, KS and Rajesh, M and Mariappan, A and Sukumaran, A and Sanal Kumar, VR (2020) Conceptual design and contour optimization of altitude compensation nozzles for ssto vehicles. In: AIAA Propulsion and Energy 2020 Forum, 24-28 August 2020, Virtual, Online, pp. 1-8.

Raghunath, KP and Manu Sagar, KV and Gokulan, T and Kumar, K and Thakur, CS (2019) ASIC Based LVDT Signal Conditioner for High-Accuracy Measurements. In: 23rd International Symposium on VLSI Design and Test, VDAT 2019, 4 - 6 July 2019, Indore, pp. 385-397.

Gupta, SK and Kumar, K and Seelamantula, CS and Thakur, CS (2019) A Portable Ultrasound Imaging System Utilizing Deep Generative Learning-Based Compressive Sensing on Pre-Beamformed RF Signals. In: 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019, 23-27 July 2019, Berlin; Germany, pp. 2740-2743.

Gupta, SK and Kumar, K and Seelamantula, CS and Thakur, CS (2019) A Portable Ultrasound Imaging System Utilizing Deep Generative Learning-Based Compressive Sensing on Pre-Beamformed RF Signals. In: 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 23-27 July 2019, Berlin, Germany, Germany, pp. 2740-2743.

Kumar, K and Raghunath, KP and Muraleedharan, A and Gaggatur, JS and Banerjee, G (2019) A 75-µW 2.4 GHz wake-up receiver in 65-nm CMOS for neonatal healthcare application. In: 32nd International Conference on VLSI Design, VLSID 2019, 5 January 2019 - 9 January 2019, New Delhi, pp. 287-292.

Ansari, H and Vijayvergia, A and Kumar, K (2019) DCR-HMM: Depression detection based on Content Rating using Hidden Markov Model. In: 2018 Conference on Information and Communication Technology, CICT 2018, 26 - 28 October 2018, Jabalpur.

Gupta, S and Kumar, P and Kumar, K and Chakraborty, S and Thakur, CS (2019) Low power neuromorphic analog system based on sub-threshold current mode circuits. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.

Sharma, R and Gupta, S and Kumar, K and Kumar, P and Thakur, CS (2019) Real-time image segmentation using neuromorphic pixel array. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.

Kumar, K and Kumar, P (2019) Analysis of Propane + CO2 mixture as a working fluid in a vapor compression refrigeration system. In: 8th Conference on Ammonia and CO2 Refrigeration Technologies, Ohrid 2019, 11 - 13 April 2019, Ohrid, pp. 319-326.

Kumar, K and Harursampath, Dinesh Kumar (2012) Morphing fixed wing MAV modeling using VAM. In: 15th European Conference on Composite Materials (ECCM15), Thematic Session : Smart Materials and composite structures (F. Furgiule, E. Dragoni), Jun 24-28, 2012, Venice, Italy.

Kumar, K and Harursampath, D (2012) Smart composite and morphing analysis using VAM. In: 49th Annual Technical Meeting (ATM) of the Society of Engineering Sciences (SES), Oct 10—12, 2012, Atlanta, GA, USA.

Kailas, Satish V and Kumar, K (2009) Friction Stir Welding. In: 2nd International Conference on Recent Advances in Material Processing technology, 2009, February, Kovilpatti.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.

Kumar, K and Kailas, Satish V (2008) An experimental analysis on a friction stir welding defect (joint-line-remnant). In: Presented at the Symposium on Joining of Materials (SOJOM), Tiruchirappalli, December, Tiruchirappalli.

Kumar, K and Kailas, Satish V (2008) Friction in Friction Stir Welding. In: International Conference on Industrial Tribology, New Delhi, November, New Delhi.

Kumar, K and Kailas, Satish V (2008) Influence of welding parameters on the weld formation and modeling of FSW. In: Workshop on Friction Stir Welding and Surfacing of Materials, Golden Jubilee Celebrations of DRDO, DMRL, Hyderabad, March, Hyderabad.

Kailas, Satish V and Kumar, K (2008) Friction Stir Welding - A Solid State Welding Process. In: National conference on recent trends in mechanical engineering sciences, SSIT, Tumkur, Feb, SSIT, Tumkur.

Kailas, Satish V and Kumar, K (2008) Influence of tilt angle of plate on friction and transfer layer - a study of aluminium pin sliding against steel plate. In: International Conference on Materials for the Future (ICMF 2008), Thrissur, Jan., Thrissur.

Kumar, K and Kailas, Satish V (2008) Optimization of friction stir welding parameters for precipitation hardenable aluminum alloys 7020 and 6061. In: International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers, February 6-8, Chennai, February 6-8, Chennai.

Kailas, Satish V and Kumar, K (2007) Optimization of Friction Stir Welding Parameters study on Aluminium alloys. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvananthapuram.

Kumar, K and Kailas, Satish V (2007) Optimization of friction stir welding parameters for AA6061-T6. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kumar, K and Kailas, Satish V (2007) Optimization of friction-stir welding parameters for a precipitation hardenable aluminum alloy. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2007) Production of bulk-nano materials by friction-stir processing. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar , K and Srivatsan, TS and Kailas, Satish V (2007) An insight into understanding the intrinsic mechanisms governing the formation of friction stir welds in joining of metals. In: The International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on friction in stir welding. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on the mechanism of friction-stir weld formation and tool design. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis, Dec 18-20 2006, IISc, Bangalore.

Journal Article

Devi, R and Singh, S and Rana, VS and Singh, O and Kumar, K and Shrivastava, R and Yadav, RK and Singh, AK and Gupta, NK and Singh, AP (2024) Synthesis of well-defined ester-linked covalent organic polymer and its potential applications in C–H bond activation. In: Journal of Photochemistry and Photobiology A: Chemistry, 447 .

Rao, P and Singh, S and Kumar, K and Pandel, U and Srivastava, C (2024) Electrochemical Behavior and Surface Chemistry Studies of Electrodeposited MnMoCrCoFeNiCu High Entropy Alloy-Carbon Nanotube Composite Coatings. In: Journal of Materials Engineering and Performance .

Patra, B and Hegde, R and Natarajan, A and Deb, D and Sachdeva, D and Ravishankar, N and Kumar, K and Gautam, GS and Senguttuvan, P (2024) Stabilizing Multi-Electron NASICON-Na1.5V0.5Nb1.5(PO4)3 Anode via Structural Modulation for Long-Life Sodium-Ion Batteries. In: Advanced Energy Materials, 14 (17).

Kumar, K and Rachna Devi, H and Raj, G and Kar Nanda, K (2024) Stimuli-free Zn/soda-lime glass/CuO-based MIS device for sensing human skin moisture. In: Journal of Materials Chemistry C .

Rao, P and Singh, S and Kumar, K and Pandel, U and Srivastava, C (2023) Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement of carbon nanotubes. In: Surface and Coatings Technology, 471 .

Raj, G and Nandan, R and Kumar, K and Gorle, DB and Mallya, AB and Osman, SM and Na, J and Yamauchi, Y and Nanda, KK (2023) High entropy alloying strategy for accomplishing quintuple-nanoparticles grafted carbon towards exceptional high-performance overall seawater splitting. In: Materials Horizons, 10 (11). 5032 -5044.

Kumar, K and Yadav, RK and Verma, RK and Singh, S and Shahin, R and Singhal, R and Gupta, NK and Singh, C and Dwivedi, DK and Baeg, J-O (2023) Unleashing the solar revolution: harnessing the power of an ultra-strong tensile strength PGTPP nanocomposite photocatalyst for artificial photosynthesis. In: Catalysis Science and Technology, 13 (19). pp. 5679-5688.

Patra, B and Kumar, K and Deb, D and Ghosh, S and Gautam, GS and Senguttuvan, P (2023) Unveiling a high capacity multi-redox (Nb5+/Nb4+/Nb3+) NASICON-Nb2(PO4)3 anode for Li- and Na-ion batteries. In: Journal of Materials Chemistry A, 11 (15). pp. 8173-8183.

Bisht, H and Kotlia, BS and Kumar, K and Taloor, AK and Arya, PC and Sah, SK and Agnihotri, V and Tewari, M and Upadhyay, R (2022) Hydrogeochemical analysis and identification of solute sources in the meltwater of Chaturangi glacier, Garhwal Himalaya, India. In: Applied Water Science, 12 (3).

Moi, S and Hosamani, B and Kumar, K and Gunaga, S and Raghothama, S and Gowd, KH (2021) Photochemical studies of new synthetic derivatives of avobenzone under sunlight using UV-spectroscopy. In: Journal of Photochemistry and Photobiology A: Chemistry, 420 .

Moitra, P and Misra, SK and Kumar, K and Kondaiah, P and Tran, P and Duan, W and Bhattacharya, S (2021) Cancer Stem Cell-Targeted Gene Delivery Mediated by Aptamer-Decorated pH-Sensitive Nanoliposomes. In: ACS Biomaterials Science and Engineering, 7 (6). pp. 2508-2519.

Maiti, B and Kumar, K and Datta, S and Bhattacharya, S (2021) Physical-Chemical Characterization of Bilayer Membranes Derived from (±) α-Tocopherol-Based Gemini Lipids and Their Interaction with Phosphatidylcholine Bilayers and Lipoplex Formation with Plasmid DNA. In: Langmuir .

Kumar, K and Gupta, HK and Kumar, P (2020) Analysis of a hybrid transcritical CO2 vapor compression and vapor ejector refrigeration system. In: Applied Thermal Engineering, 181 .

Desai, A and Mogra, M and Sridhara, S and Kumar, K and Sesha, G and Ananthasuresh, GK (2020) Topological-derivative-based design of stiff fiber-reinforced structures with optimally oriented continuous fibers. In: Structural and Multidisciplinary Optimization . (In Press)

Kumar, K and Kumar Shyamlal, BR and Verma, R and Kondaiah, P and Chaudhary, S (2020) Reduction-Triggered Doxorubicin Delivery by Self-Assembled Nanospheres of Lipoylated Caffeine. In: ChemMedChem, 15 (9). pp. 733-737.

Bisht, H and Kotlia, BS and Kumar, K and Arya, PC and Sah, SK and Kukreti, M and Chand, P (2020) Estimation of suspended sediment concentration and meltwater discharge draining from the Chaturangi glacier, Garhwal Himalaya. In: Arabian Journal of Geosciences, 13 (6).

Roy, PK and Kumar, K and Thakkar, FM and Pathak, AD and Ayappa, KG and Maiti, PK (2020) Investigations on 6FDA/BPDA-DAM polymer melt properties and CO2 adsorption using molecular dynamics simulations. In: Journal of Membrane Science, 613 .

Kumar, K and Moitra, P and Bashir, M and Kondaiah, P and Bhattacharya, S (2020) Natural tripeptide capped pH-sensitive gold nanoparticles for efficacious doxorubicin delivery both: In vitro and in vivo. In: Nanoscale, 12 (2). pp. 1067-1074.

Kumar, K and Yadav, L and Kondaiah, P and Chaudhary, S (2019) Efficacious Doxorubicin Delivery Using Glutathione-Responsive Hollow Non-phospholipid Vesicles Bearing Lipoyl Cholesterols. In: ChemMedChem, 14 (18). pp. 1633-1640.

Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.

Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.

Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Kumar, K and Kalyan, C and Kailas, Satish V and Srivatsan, TS (2009) An Investigation of Friction During Friction Stir Welding of Metallic Materials. In: Materials And Manufacturing Processes, 24 (4). pp. 438-445.

Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.

Kumar, K and Kailas, Satish V (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. In: Materials & Design, 29 (4). 791 -797.

Ramamoorthy, K and Kumar, K and Koinkar, Pankaj and Ganesan, K and Shah, Amit P and Sankaranarayanan, K and Ramasamy, P (2007) A novel in situ method for simultaneous growth of smart material single crystals and thin films. In: Smart Materials and Structures, 16 (1). pp. 83-88.

Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.

Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.

Pradeep, S and Kumar, K (2003) Extension of tethered satellites in the atmosphere. In: Acta Astronautica, 52 (1). 01-10.

Kumar, K and Pradeep, S (1998) Strategies for three dimensional deployment of tethered satellites. In: Mechanics Research Communications, 25 (5). pp. 543-550.

Kumar, K and Menon, AG and Sastry, PS (1992) Computer-assisted Determination of Elemental Composition of Fragments in Mass Spectra. In: Rapid Communications in Mass Spectrometry, 6 (9). pp. 585-591.

This list was generated on Mon Jun 17 03:57:14 2024 IST.