ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Author

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 55.

Conference Proceedings

Maiya, MP and Kumar, K and Hafner, A and Banasiak, K and Neksa, P and Kumar, P and Singh, S (2019) Experimental analysis of transcritical CO2 booster refrigeration system with heat recovery and ejector expansion. In: 25th IIR International Congress of Refrigeration, ICR 2019, 24 August 2019 - 30 August 2019, Montreal, pp. 1467-1474.

Conference Paper

Rao, A and Kumar, K and Raghavan, S (2022) Modeling and Experimental Evidence of the Effect of Concentration Gradients on the Surface Processes during CVD Growth of MoS2. In: 5th IEEE International Conference on Emerging Electronics, ICEE 2020, 26 - 28 November 2020, New Delhi.

Pradeep, R and Thianesh, UK and Prabhu, R and Kumar, K and Rajaram Perumal, M and Sumanth Eswar, KS and Rajesh, M and Mariappan, A and Sukumaran, A and Sanal Kumar, VR (2020) Conceptual design and contour optimization of altitude compensation nozzles for ssto vehicles. In: AIAA Propulsion and Energy 2020 Forum, 24-28 August 2020, Virtual, Online, pp. 1-8.

Raghunath, KP and Manu Sagar, KV and Gokulan, T and Kumar, K and Thakur, CS (2019) ASIC Based LVDT Signal Conditioner for High-Accuracy Measurements. In: 23rd International Symposium on VLSI Design and Test, VDAT 2019, 4 - 6 July 2019, Indore, pp. 385-397.

Gupta, SK and Kumar, K and Seelamantula, CS and Thakur, CS (2019) A Portable Ultrasound Imaging System Utilizing Deep Generative Learning-Based Compressive Sensing on Pre-Beamformed RF Signals. In: 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019, 23-27 July 2019, Berlin; Germany, pp. 2740-2743.

Gupta, SK and Kumar, K and Seelamantula, CS and Thakur, CS (2019) A Portable Ultrasound Imaging System Utilizing Deep Generative Learning-Based Compressive Sensing on Pre-Beamformed RF Signals. In: 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 23-27 July 2019, Berlin, Germany, Germany, pp. 2740-2743.

Ansari, H and Vijayvergia, A and Kumar, K (2019) DCR-HMM: Depression detection based on Content Rating using Hidden Markov Model. In: 2018 Conference on Information and Communication Technology, CICT 2018, 26 - 28 October 2018, Jabalpur.

Gupta, S and Kumar, P and Kumar, K and Chakraborty, S and Thakur, CS (2019) Low power neuromorphic analog system based on sub-threshold current mode circuits. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.

Sharma, R and Gupta, S and Kumar, K and Kumar, P and Thakur, CS (2019) Real-time image segmentation using neuromorphic pixel array. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.

Kumar, K and Kumar, P (2019) Analysis of Propane + CO2 mixture as a working fluid in a vapor compression refrigeration system. In: 8th Conference on Ammonia and CO2 Refrigeration Technologies, Ohrid 2019, 11 - 13 April 2019, Ohrid, pp. 319-326.

Kumar, K and Harursampath, Dinesh Kumar (2012) Morphing fixed wing MAV modeling using VAM. In: 15th European Conference on Composite Materials (ECCM15), Thematic Session : Smart Materials and composite structures (F. Furgiule, E. Dragoni), Jun 24-28, 2012, Venice, Italy.

Kumar, K and Harursampath, D (2012) Smart composite and morphing analysis using VAM. In: 49th Annual Technical Meeting (ATM) of the Society of Engineering Sciences (SES), Oct 10—12, 2012, Atlanta, GA, USA.

Kailas, Satish V and Kumar, K (2009) Friction Stir Welding. In: 2nd International Conference on Recent Advances in Material Processing technology, 2009, February, Kovilpatti.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.

Kumar, K and Kailas, Satish V (2008) An experimental analysis on a friction stir welding defect (joint-line-remnant). In: Presented at the Symposium on Joining of Materials (SOJOM), Tiruchirappalli, December, Tiruchirappalli.

Kumar, K and Kailas, Satish V (2008) Friction in Friction Stir Welding. In: International Conference on Industrial Tribology, New Delhi, November, New Delhi.

Kumar, K and Kailas, Satish V (2008) Influence of welding parameters on the weld formation and modeling of FSW. In: Workshop on Friction Stir Welding and Surfacing of Materials, Golden Jubilee Celebrations of DRDO, DMRL, Hyderabad, March, Hyderabad.

Kailas, Satish V and Kumar, K (2008) Friction Stir Welding - A Solid State Welding Process. In: National conference on recent trends in mechanical engineering sciences, SSIT, Tumkur, Feb, SSIT, Tumkur.

Kailas, Satish V and Kumar, K (2008) Influence of tilt angle of plate on friction and transfer layer - a study of aluminium pin sliding against steel plate. In: International Conference on Materials for the Future (ICMF 2008), Thrissur, Jan., Thrissur.

Kumar, K and Kailas, Satish V (2008) Optimization of friction stir welding parameters for precipitation hardenable aluminum alloys 7020 and 6061. In: International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers, February 6-8, Chennai, February 6-8, Chennai.

Kailas, Satish V and Kumar, K (2007) Optimization of Friction Stir Welding Parameters study on Aluminium alloys. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvananthapuram.

Kumar, K and Kailas, Satish V (2007) Optimization of friction stir welding parameters for AA6061-T6. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.

Kumar, K and Kailas, Satish V (2007) Optimization of friction-stir welding parameters for a precipitation hardenable aluminum alloy. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar, K and Kailas, Satish V (2007) Production of bulk-nano materials by friction-stir processing. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Kumar , K and Srivatsan, TS and Kailas, Satish V (2007) An insight into understanding the intrinsic mechanisms governing the formation of friction stir welds in joining of metals. In: The International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.

Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on friction in stir welding. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.

Kumar, K and Kailas, Satish V (2006) An investigation on the mechanism of friction-stir weld formation and tool design. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis, Dec 18-20 2006, IISc, Bangalore.

Journal Article

Bisht, H and Kotlia, BS and Kumar, K and Taloor, AK and Arya, PC and Sah, SK and Agnihotri, V and Tewari, M and Upadhyay, R (2022) Hydrogeochemical analysis and identification of solute sources in the meltwater of Chaturangi glacier, Garhwal Himalaya, India. In: Applied Water Science, 12 (3).

Moitra, P and Misra, SK and Kumar, K and Kondaiah, P and Tran, P and Duan, W and Bhattacharya, S (2021) Cancer Stem Cell-Targeted Gene Delivery Mediated by Aptamer-Decorated pH-Sensitive Nanoliposomes. In: ACS Biomaterials Science and Engineering, 7 (6). pp. 2508-2519.

Maiti, B and Kumar, K and Datta, S and Bhattacharya, S (2021) Physical-Chemical Characterization of Bilayer Membranes Derived from (±) α-Tocopherol-Based Gemini Lipids and Their Interaction with Phosphatidylcholine Bilayers and Lipoplex Formation with Plasmid DNA. In: Langmuir .

Kumar, K and Gupta, HK and Kumar, P (2020) Analysis of a hybrid transcritical CO2 vapor compression and vapor ejector refrigeration system. In: Applied Thermal Engineering, 181 .

Desai, A and Mogra, M and Sridhara, S and Kumar, K and Sesha, G and Ananthasuresh, GK (2020) Topological-derivative-based design of stiff fiber-reinforced structures with optimally oriented continuous fibers. In: Structural and Multidisciplinary Optimization . (In Press)

Bisht, H and Kotlia, BS and Kumar, K and Arya, PC and Sah, SK and Kukreti, M and Chand, P (2020) Estimation of suspended sediment concentration and meltwater discharge draining from the Chaturangi glacier, Garhwal Himalaya. In: Arabian Journal of Geosciences, 13 (6).

Roy, PK and Kumar, K and Thakkar, FM and Pathak, AD and Ayappa, KG and Maiti, PK (2020) Investigations on 6FDA/BPDA-DAM polymer melt properties and CO2 adsorption using molecular dynamics simulations. In: Journal of Membrane Science, 613 .

Kumar, K and Moitra, P and Bashir, M and Kondaiah, P and Bhattacharya, S (2020) Natural tripeptide capped pH-sensitive gold nanoparticles for efficacious doxorubicin delivery both: In vitro and in vivo. In: Nanoscale, 12 (2). pp. 1067-1074.

Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.

Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.

Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.

Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.

Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.

Kumar, K and Kalyan, C and Kailas, Satish V and Srivatsan, TS (2009) An Investigation of Friction During Friction Stir Welding of Metallic Materials. In: Materials And Manufacturing Processes, 24 (4). pp. 438-445.

Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.

Kumar, K and Kailas, Satish V (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. In: Materials & Design, 29 (4). 791 -797.

Ramamoorthy, K and Kumar, K and Koinkar, Pankaj and Ganesan, K and Shah, Amit P and Sankaranarayanan, K and Ramasamy, P (2007) A novel in situ method for simultaneous growth of smart material single crystals and thin films. In: Smart Materials and Structures, 16 (1). pp. 83-88.

Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.

Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.

Pradeep, S and Kumar, K (2003) Extension of tethered satellites in the atmosphere. In: Acta Astronautica, 52 (1). 01-10.

Kumar, K and Pradeep, S (1998) Strategies for three dimensional deployment of tethered satellites. In: Mechanics Research Communications, 25 (5). pp. 543-550.

Kumar, K and Menon, AG and Sastry, PS (1992) Computer-assisted Determination of Elemental Composition of Fragments in Mass Spectra. In: Rapid Communications in Mass Spectrometry, 6 (9). pp. 585-591.

This list was generated on Thu Dec 8 23:23:17 2022 IST.