|
 | Up a level |
Dutta, Pradip and Kumar, Pramod (2017) Supercritical Carbon Dioxide-Based Power Cycles. [Book Chapter]
Ortega, Jesus D and Khivsara, Sagar D and Christian, Joshua M and Dutta, Pradip and Ho, Clifford K (2018) ON-SUN TESTING OF A HIGH TEMPERATURE BLADED SOLAR RECEIVER AND TRANSIENT EFFICIENCY EVALUATION USING AIR. In: 12th ASME International Conference on Energy Sustainability, June 24-28, 2018, Lake Buena Vista, FL, USA.
Garg, Pardeep and Kumar, Pramod and Dutta, Pradip and Conboy, Thomas and Ho, Clifford (2014) DESIGN OF AN EXPERIMENTAL TEST FACILITY FOR SUPERCRITICAL CO2 BRAYTON CYCLE. In: ASME 8th International Conference on Energy Sustainability, JUN 30-JUL 02, 2014, Seaport World Trade Ctr, Boston, MA.
Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2014) ELEVATION OF HEAT REJECTION TEMPERATURE IN TRANSCRITICAL CONDENSING CYCLES USING CO2+PROPANE MIXTURES. In: ASME Turbo Expo: Turbine Technical Conference and Exposition, JUN 16-20, 2014, Dusseldorf, GERMANY.
Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2013) Friction Welding of Thixocast A356 Aluminium Alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2012), OCT 08-11, 2012, Cape Town, SOUTH AFRICA, pp. 305-310.
Singh, Shailesh K and Chattopadhyay, K and Dutta, Pradip (2012) Friction Welding of Thixocast A356 Aluminium Alloy. In: http://dx.doi.org/10.4028/www.scientific.net/SSP.192-193.305 , OCT 08-11, 2012 , Cape Town, SOUTH AFRICA, pp. 305-310.
Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Study of dendrite growth in a rotational flow field. In: 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, December 27-30, 2011, Indian Institute of Technology Madras, Chennai, India.
Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Dutta, Pradip (2017) Modeling the effect of heat source temperature on the performance of two-stage air cooled silica gel plus water adsorption system. In: 8th International Conference on Applied Energy (ICAE), OCT 08-11, 2016, Beijing, PEOPLES R CHINA, pp. 2010-2015.
Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2011) Modeling of growth and motion of equiaxed dendrites in a convecting melt. In: 2010 3rd International Conference on Thermal Issues in Emerging Technologies Theory and Applications (ThETA), 19-22 Dec. 2010, Cairo, Egypt.
Jasvanth, VS and Ambirajan, Amrit and Adoni, Abhijit A and Kumar, D and Gupta, PP and Bhandari, DR and Dutta, Pradip (2008) Experimental Results from a Three-port Acetone CPL with Tubular Axially Grooved evaporator. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Saha, SK and Dutta, Pradip (2008) Role of Melt Convection on the Thermal Performance of Heat Sinks with Phase Change Material. In: 10th Electronics Packing Technology Conference, DEC 09-12, 2008, Singapore, Singapore, pp. 539-544.
Kumar, A and Dutta, Pradip (2006) Effect of Electromagnetic Stirring on Macrosegregation during Solidification of a Binary Alloy. In: 13th International heat Transfer Conference, August 13-18 2006, Sydney, Australia.
Kumar, Arvind and Dutta, Pradip (2006) Modelling of Heat, Mass, Energy and Solute Transport during Solidification of Ternary Alloys. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.
Srinivasan, Kandadai and Dutta, Pradip (2019) Activated carbon-carbon dioxide based two stage adsorption compression Brayton cycle power generation. In: ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY, 25 (8). pp. 1663-1672.
Das, Prosenjit and Bhuniya, Bikash and Samanta, Sudip K. and Dutta, Pradip (2019) Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271 . pp. 293-311.
Anand, AR and Jaiswal, Akhil and Ambirajan, Amrit and Dutta, Pradip (2018) Experimental studies on a miniature loop heat pipe with flat evaporator with various working fluids. In: APPLIED THERMAL ENGINEERING, 144 . pp. 495-503.
Das, Prosenjit and Samanta, Sudip K and Mondal, Biswanath and Dutta, Pradip (2018) Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 49 (4). pp. 1925-1944.
Thimmaiah, Poovanna Cheppudira and Panda, Asish Kumar and Pandey, Upendra Kumar and McCague, Claire and Dutta, Pradip and Bahrami, Majid (2018) A New Approach to Compute the Porosity and Surface Roughness of Porous Coated Capillary-Assisted Low Pressure Evaporators. In: SCIENTIFIC REPORTS, 8 .
Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Electrokinetically induced thermofluidic transport of power-law fluids under the influence of superimposed magnetic field. In: CHEMICAL ENGINEERING SCIENCE, 171 . pp. 391-403.
Dutta, Pradip (2017) High temperature solar receiver and thermal storage systems Pradip Dutta. In: APPLIED THERMAL ENGINEERING, 124 . pp. 624-632.
Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Magnetohydrodynamic stationary and oscillatory convective stability in a mushy layer during binary alloy solidification. In: APPLIED MATHEMATICAL MODELLING, 48 . pp. 233-249.
Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Srinivasan, Kandadai and Dutta, Pradip (2017) Modeling study of two-stage, multi-bed air cooled silica gel plus water adsorption cooling cum desalination system. In: APPLIED THERMAL ENGINEERING, 114 . pp. 704-712.
Mitra, Sourav and Thu, Kyaw and Saha, Bidyut Baran and Dutta, Pradip (2017) Performance evaluation and determination of minimum desorption temperature of a two-stage air cooled silica gel/water adsorption system. In: APPLIED ENERGY, 206 . pp. 507-518.
Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2017) Thermofluidic characteristics of combined electroosmotic and pressure driven flows in narrow confinements in presence of spatially non-uniform magnetic field. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 104 . pp. 1325-1340.
Ortega, Jesus and Khivsara, Sagar and Christian, Joshua and Ho, Clifford and Yellowhair, Julius and Dutta, Pradip (2016) Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Optical and thermal-fluid evaluation. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 970-978.
Ortega, Jesus and Khivsara, Sagar and Christian, Joshua and Ho, Clifford and Dutta, Pradip (2016) Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Structural and creep-fatigue evaluation. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 979-987.
Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2016) Development and performance studies of an air cooled two-stage multi-bed silica-gel plus water adsorption system. In: INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 67 . pp. 174-189.
Jaiswal, Ankush Kumar and Mitra, Sourav and Dutta, Pradip and Srinivasan, Kandadai and Murthy, Srinivasa S (2016) Influence of cycle time and collector area on solar driven adsorption chillers. In: SOLAR ENERGY, 136 . pp. 450-459.
Das, Prosenjit and Samanta, Sudip K and Bera, Supriya and Dutta, Pradip (2016) Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (5). pp. 2243-2256.
Meshram, Ajinkya and Jaiswal, Ankush Kumar and Khivsara, Sagar D and Ortega, Jesus D and Ho, Clifford and Bapat, Rucha and Dutta, Pradip (2016) Modeling and analysis of a printed circuit heat exchanger for supercritical CO2 power cycle applications. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 861-870.
Nayak, Kali Charan and Dutta, Pradip (2016) Numerical Investigations for Leakage and Windage Heating in Straight-Through Labyrinth Seals. In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 138 (1).
Dalal, Swapnil and Tomar, Gaurav and Dutta, Pradip (2016) Numerical study of driven flows of shear thinning viscoelastic fluids in rectangular cavities. In: JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 229 . pp. 59-78.
Das, Prosenjit and Dutta, Pradip (2016) Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy. In: COMPUTATIONAL MATERIALS SCIENCE, 125 . pp. 8-19.
Minkowycz, WJ and Basak, Tanmay and Ravi, R and Jayanti, S and Das, SK and Roy, Satyajit and Chhabra, RP and Biswas, Gautam and Dutta, Pradip and Rose, John W and Bejan, Adrian and Taine, Jean (2016) Professor Arcot R. Balakrishnan on his 65th birthday. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 94 . pp. 498-499.
Khivsara, Sagar D and Srinivasan, Vinod and Dutta, Pradip (2016) Radiative heating of supercritical carbon dioxide flowing through tubes. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 871-877.
Samantaray, Dipti and Chaudhuri, Atanu and Borah, Utpal and Bhaduri, AK and Dutta, Pradip (2016) Role of grain boundary ferrite layer in dynamic recrystallization of semi-solid processed type 304L austenitic stainless steel. In: MATERIALS LETTERS, 179 . pp. 65-68.
Mitra, Sourav and Aswin, N and Dutta, Pradip (2016) Scaling analysis and numerical studies on water vapour adsorption in a columnar porous silica gel bed. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 95 . pp. 853-864.
Aswin, N and Dutta, Pradip and Murthy, Srinivasa S (2016) Screening of metal hydride pairs for closed thermal energy storage systems. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 949-957.
Mitra, Sourav and Srinivasan, Kandadai and Kumar, Pramod and Dutta, Pradip (2016) Silica Gel plus Water Adsorber Chiller and Desalination System: A Transient Heat Transfer Study. In: JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 8 (2).
Kumar, Pramod and Dutta, Pradip and Murthy, Stikantiah Srinivasa and Srinivasan, Kandadai (2016) Solar driven carbon dioxide Brayton cycle power generation with thermal compression. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 854-860.
Sarkar, Sandip and Ganguly, Suvankar and Dutta, Pradip (2016) Thermally developing combined magnetohydrodynamic and electrokinetic transport in narrow confinements with interfacial slip. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 100 . pp. 451-463.
Karagadde, Shyamprasad and Dutta, Pradip (2016) A comparison of time-scales governing the interaction and growth of hydrogen bubbles with a solidifying front. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 79 . pp. 16-20.
Das, Prosenjit and Samanta, Sudip K and Tiwari, Shashank and Dutta, Pradip (2015) Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 68 (6). pp. 1215-1220.
Samantaray, Dipti and Borah, Utpal and Bhaduri, AK and Dutta, Pradip (2015) Effect of semi-solid heat treatment on elevated temperature plasticity of 304L stainless steel. In: JOURNAL OF MATERIALS SCIENCE, 51 (9). pp. 4306-4319.
Singh, Shailesh Kumar and Chattopadhyay, K and Dutta, Pradip (2015) High-Temperature Workability of Thixocast A356 Aluminum Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 3248-3259.
Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2015) Instrumentation and control of a two-stage 4-bed silica gel plus water adsorption cooling cum desalination system. In: MEASUREMENT, 79 . pp. 29-43.
Saha, Sandip Kumar and Dutta, Pradip (2015) Performance Analysis of Heat Sinks With Phase-Change Materials Subjected to Transient and Cyclic Heating. In: HEAT TRANSFER ENGINEERING, 36 (16). pp. 1349-1359.
Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2015) Performance evaluation of a two-stage silica gel plus water adsorption based cooling-cum-desalination system. In: INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 58 . pp. 186-198.
Das, Prosenjit and Samanta, Sudip K and Dutta, Pradip (2015) Rheological Behavior of Al-7Si-0.3Mg Alloy at Mushy State. In: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 46 (3). pp. 1302-1313.
Mitra, Sourav and Oh, Seung Taek and Saha, Bidyut Baran and Dutta, Pradip and Srinivasan, Kandadai (2015) SIMULATION STUDY OF THE ADSORPTION DYNAMICS OF CYLINDRICAL SILICA GEL PARTICLES. In: HEAT TRANSFER RESEARCH, 46 (2). pp. 123-140.
Bhattacharya, Anirban and Dutta, Pradip (2014) Effect of shrinkage induced flow on binary alloy dendrite growth: An equivalent undercooling model. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 57 . pp. 216-220.
Samantaray, Dipti and Kumar, Vinod and Bhaduri, AK and Dutta, Pradip (2014) Formation of annular austenitic ring between outer ferrite layer and solid globule in a semi-solid processed SS 304L. In: MATERIALS LETTERS, 135 . pp. 127-130.
Das, Prosenjit and Samanta, Sudip K and Das, Reeta and Dutta, Pradip (2014) Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis. In: MEASUREMENT, 55 . pp. 605-615.
Das, Prosenjit and Samanta, Sudip Kumar and Kumar, Pramod and Dutta, Pradip (2014) Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy. In: ISIJ INTERNATIONAL, 54 (7). pp. 1601-1610.
Das, Prosenjit and Kumar, Manish and Samanta, Sudip K and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. In: MATERIALS AND MANUFACTURING PROCESSES, 29 (4). pp. 422-428.
Mitra, Sourav and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2014) Simulation study of a two-stage adsorber system. In: APPLIED THERMAL ENGINEERING, 72 (2, SI). pp. 283-288.
Bhattacharya, Anirban and Kiran, Apoorva and Karagadde, Shyamprasad and Dutta, Pradip (2014) An enthalpy method for modeling eutectic solidification. In: JOURNAL OF COMPUTATIONAL PHYSICS, 262 . pp. 217-230.
Saha, Sandip K. and Dutta, Pradip (2013) Role of melt convection on optimization of PCM-based heat sink under cyclic heat load. In: Heat Transfer Engineering, 34 (11-12). pp. 950-958.
Bhattacharya, Anirban and Dutta, Pradip (2013) Role of convection in microstructure evolution during solidification. In: Current Science, 105 (4). pp. 480-485.
Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of carbon dioxide blends with isopentane and propane as working fluids for organic Rankine cycles. In: Applied Thermal Engineering, 52 (2). pp. 439-448.
Srinivasan, Kandadai and Dutta, Pradip and Velasco, Santiago and White, Juan A (2013) On isentropic lines and isentropic exponents. In: Journal of Chemical Thermodynamics, 56 . pp. 144-148.
Garg, Pardeep and Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2013) Evaluation of isopentane, R-245fa and their mixtures as working fluids for organic Rankine cycles. In: APPLIED THERMAL ENGINEERING, 51 (1-2). pp. 292-300.
Srinivasan, Kandadai and Dutta, Pradip and Saha, Bidyut Baran and Ng, Kim Choon and Prasad, Madhu (2013) Realistic minimum desorption temperatures and compressor sizing for activated carbon + HFC 134a adsorption coolers. In: APPLIED THERMAL ENGINEERING, 51 (1-2). pp. 551-559.
Bhattacharya, Anirban and Dutta, Pradip (2013) An enthalpy-based model of dendritic growth in a convecting binary alloy melt. In: INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 23 (7). pp. 1121-1135.
Bhattacharya, Anirban and Karagadde, Shyamprasad and Dutta, Pradip (2013) An equivalent undercooling model to account for flow effect on binary alloy dendrite growth rate. In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 47 . pp. 15-19.
Gavara, Madhusudhana R and Dutta, Pradip and Seetharamu, KN (2012) Mixed convection adjacent to non-isothermal vertical surfaces. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55 (17-18). pp. 4580-4587.
Karagadde, Shyamprasad and Bhattacharya, Anirban and Tomar, Gaurav and Dutta, Pradip (2012) A coupled VOF-IBM-enthalpy approach for modeling motion and growth of equiaxed dendrites in a solidifying melt. In: JOURNAL OF COMPUTATIONAL PHYSICS, 231 (10). pp. 3987-4000.
Saha, Sandip Kumar and Dutta, Pradip (2012) Thermal Management of Electronics Using PCM-Based Heat Sink Subjected to Cyclic Heat Load. In: IEEE Transactions on Components, Packaging, and Manufacturing Technology Part C, 2 (3). pp. 464-473.
Velasco, Santiago and White, Juan A and Srinivasan, Kandadai and Dutta, Pradip (2012) Waring and Riedel Functions for the Liquid-Vapor Coexistence Curve. In: Industrial & Engineering Chemistry Research, 51 (7). pp. 3197-3202.
Narasimhan, Arunn and Reddy, BVK and Dutta, Pradip (2012) Thermal management using the bi-disperse porous medium approach. In: International Journal of Heat and Mass Transfer, 55 (4). pp. 538-546.
Srinivasan, Kandadai and Dutta, Pradip and Ng, Kim Choon and Saha, Bidyut Baran (2012) Calculation of Heat of Adsorption of Gases and Refrigerants on Activated Carbons from Direct Measurements Fitted to the Dubinin-Astakhov Equation. In: ADSORPTION SCIENCE & TECHNOLOGY, 30 (7). pp. 549-565.
Das, Prosenjit and Samanta, Sudip K and Chattopadhyay, Himadri and Dutta, Pradip (2012) Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. In: ACTA METALLURGICA SINICA-ENGLISH LETTERS, 25 (5). pp. 329-339.
Adoni, Abhijit A and Vaidya, Jasvanth S and Ambirajan, Amrit and Kumar, Dinesh and Krishnaswamy, Badarinarayana and Dutta, Pradip (2012) Evaporation Heat Transfer Coefficient in a Capillary Pumped Loop and Loop Heat Pipe for Different Working Fluids. In: Heat Transfer Engineering, 33 (9, SI). pp. 765-774.
Das, Prosenjit and Samanta, Sudip K and Venkatpathi, BRK and Chattopadhyay, Himadri and Dutta, Pradip (2012) Microstructural Evolution of A356 Al Alloy During Flow Along a Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 669-672.
Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2012) A model for growth and engulfment of gas microporosity during aluminum alloy solidification process. In: COMPUTATIONAL MATERIALS SCIENCE, 65 . pp. 383-394.
Chakraborty, Prodyut R and Dutta, Pradip (2011) A Generalized Enthalpy Update Scheme for Solidification of a Binary Alloy with Solid Phase Movement. In: Metallurgical and Materials Transactions B, 42 (6). pp. 1075-1079.
Gundiah, Namrata and Narasimhan, Arunn and Dutta, Pradip (2011) Macromolecular Transport Through Porous Arterial Walls. In: Journal of the Indian Institute of Science, 91 (3). pp. 367-382.
Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I-Experimental Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 825-836.
Kumar, Arvind and Walker, Mike J and Sundarraj, Suresh and Dutta, Pradip (2011) Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part II-Numerical Studies. In: Metallurgical and Materials Transactions B, 42 (4). pp. 783-799.
Srinivasan, Kandadai and Saha, Bidyut Baran and Ng, Kim Choon and Dutta, Pradip and Prasad, Madhu (2011) A method for the calculation of the adsorbed phase volume and pseudo-saturation pressure from adsorption isotherm data on activated carbon. In: PCCP: Physical Chemistry Chemical Physics, 13 (27). pp. 12559-12570.
Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Nagesh and Dutta, Pradip (2010) Theoretical and Experimental Studies on an Ammonia-Based Loop Heat Pipe With a Flat Evaporator. In: IEEE Transactions on Components and Packaging Technologies, 33 (2). pp. 478-487.
Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D Nagesh and Dutta, Pradip (2010) Theoretical Studies of Hard Filling in Loop Heat Pipes. In: Journal of Thermophysics and Heat Transfer, 24 (1). pp. 173-183.
Pathak, Nitin and Kumar, Arvind and Yadav, Anil and Dutta, Pradip (2009) Effects of mould filling on evolution of the solid-liquid interface during solidification. In: Applied Thermal Engineering, 29 (17-18). pp. 3669-3678.
Sanyal, Anuradha and Srinivasan, Kandadai and Dutta, Pradip (2009) Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets. In: IIEEE Transactions on Components and Packaging Technologies, 32 (4). pp. 859-867.
Barman, N and Dutta, Pradip (2009) Effect of process parameters on transport phenomena during solidification in the presence of electromagnetic stirring. In: Transactions of the Indian Institute of Metals, 62 (4-5). pp. 469-474.
Pardeshi, R and Dutta, Pradip and Singh, AK (2009) Modeling of Convection and Macrosegregation through Appropriate Consideration of Multiphase/Multiscale Phenomena during Alloy Solidification. In: Industrial and Engineerign Chemistry Research, 48 (19). pp. 8789-8804.
Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.
Akkimaradi, Basavaraj S and Prasad, Madhu and Dutta, Pradip and Saha, Bidyut Baran and Srinivasan, Kandadai (2009) Adsorption of Nitrogen on Activated Carbon-Refit of Experimental Data and Derivation of Properties Required for Design of Equipment. In: Journal of Chemical & Engineering Data, 54 (8). 2291 -2295.
Kumar, Arvind and Dutta, Pradip (2009) Numerical studies on columnar-to-equiaxed transition in directional solidification of binary alloys. In: Journal Of Materials Science, 44 (15). pp. 3952-3961.
Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2009) Modeling growth of hydrogen bubbles in aluminum castings using the level-set method. In: Scripta Materialia, 61 (2). pp. 216-219.
Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, Dinesh and Dutta, Pradip (2009) Effects of mass of charge on loop heat pipe operational characteristics. In: Journal Of Thermophysics And Heat Transfer, 23 (2). pp. 346-355.
Yadav, Anil and Pathak, Nitin and Kumar, Arvind and Dutta, Pradip and Sarkar, Supriya (2009) Effects of the filling process on the evolution of the mushy zone and macrosegregation in alloy casting. In: Modelling and Simulation in Materials Science and Engineering, 17 (3). pp. 1-19.
Barman, N and Dutta, Pradip (2008) Studies on macrosegregation and double diffusive convection during directional solidification of binary mixture. In: Materials Science And Technology, 24 (10). pp. 1230-1237.
Kumar, Arvind and Dutta, Pradip (2008) A Rayleigh number based dendrite fragmentation criterion for detachment of solid crystals during solidification. In: Journal of Physics D-Applied Physics, 41 (15). p. 155501.
Arghode, Vaibhav K and Kumar, Arvind and Sundarraj, Suresh and Dutta, Pradip (2008) Computational Modeling of GMAW Process for Joining Dissimilar Aluminum Alloys. In: Numerical Heat Transfer, Part A: Applications, 53 (4). pp. 432-455.
Kumar, Arvind and Dutta, Pradip and Sundarraj, Suresh and Walker, Mike J (2007) Remelting of Solid and its Effect on Macrosegregation During Solidification. In: Numerical Heat Transfer, Part A: Applications, 51 (1). pp. 59-83.
Behera, Ramesh Chandra and Dutta, Pradip and Srinivasan, K (2007) Numerical Study of Interrupted Impinging Jets for Cooling of Electronics. In: IEEE Transactions on Components and Packaging Technologies, 30 (2). pp. 275-284.
Jain, Jayesh and Kumar, Arvind and Dutta, Pradip (2007) Numerical studies on channel formation and growth during solidification: Effect of process parameters. In: Journal of Heat Transfer, 129 (4). pp. 548-558.
Adoni, Abhijit A and Ambirajan, Amrit and Jasvanth, VS and Kumar, D and Dutta, Pradip and Srinivasan, K (2007) Thermohydraulic Modeling of Capillary Pumped Loop and Loop Heat Pipe. In: Journal of Thermophysics and Heat Transfer, 21 (2). pp. 410-421.
Saha, Bidyut Baran and Chakraborty, Anutosh and Koyama, Shigeru and Srinivasan, Kandadai and Choon Ng, Kim and Dutta, Pradip (2007) Thermodynamic formalism of minimum heat source temperature for driving advanced adsorption cooling device. In: Applied Physic Letters, 91 (11). 111902-1-111902-3.
Kumar, Pramod and Srinivasan, Kandadai and Dutta, Pradip (2006) Visualization of convection loops due to Rayleigh-Benard convection during solidification. In: Mechanics Research Communications, 33 (5). pp. 593-600.
Chakraborty, Suman and Dutta, Pradip (2005) Effects of Solutal Undercooling on Three-Dimensional Double-Diffusive Convection and Macrosegregation during Solidification of a Binary Alloy. In: Numerical Heat Transfer Part A: Applications, 48 (3). pp. 261-281.
Kumar, Arvind and Dutta, Pradip (2005) Modeling of transport phenomena in continuous casting of non-dendritic billets. In: International Journal of Heat and Mass Transfer, 48 (17). pp. 3674-3688.
Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.
Chakraborty, Suman and Dutta, Pradip (2004) Effects of solid layer thickness and nominal composition on double-diffusive instabilities during solidification of a binary alloy cooled from the top. In: International Journal of Heat and Mass Transfer, 47 (1). pp. 185-190.
Chakraborty, Suman and Dutta, Pradip (2003) Analytical solutions for heat transfer during cyclic melting and freezing of a phase change material used in electronic or electrical packaging. In: Journal of Electronic Packaging, 125 (1). pp. 126-133.
Chakraborty, Nilanjan and Chakraborty, Suman and Dutta, Pradip (2003) Modelling of turbulent transport in arc welding pools. In: International Journal of Numerical Methods for Heat and Fluid Flow, 13 (1). 07-30.
Chakraborty, Suman and Dutta, Pradip (2002) An analytical solution for conduction-dominated unidirectional solidification of binary mixtures. In: Applied Mathematical Modelling, 26 (4). pp. 545-561.
Chakraborty, Suman and Dutta, Pradip (2002) Numerical modeling of heat and mass transfer in laser surface alloying: Non-equilibrium solidification effects. In: Materials and Manufacturing Processes, 17 (4). 455-468 .
Chakraborty, Suman and Dutta, Pradip (2002) The effect of solutal undercooling on double-diffusive convection and macrosegregation during binary alloy solidification: a numerical investigation. In: International Journal for Numerical Methods in Fluids, 38 (9). pp. 895-917.
Akkimaradi, Basavaraj S and Prasad, Madhu and Srinivasan, Kandadai and Dutta, Pradip (2001) Adsorption of 1,1,1,2-Tetrafluoroethane on Activated Charcoal. In: Journal of Chemical & Engineering Data, 46 (2). pp. 417-422.
Krishnaprakas, K and Narayana, Badari K and Dutta, Pradip (2001) Combined Conduction And Radiation Heat Transfer In A Gray Anisotropically Scattering Planar Medium With Diffuse-pecular Boundaries. In: International Communications in Heat and Mass Transfer, 28 (1). pp. 77-86.
Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (2000) Heat transfer correlations for multilayer insulation systems. In: Cryogenics, 40 (07). pp. 431-435.
Krishnaprakas, CK and Narayana, Badari K and Dutta, Pradip (1999) Interaction of radiation with natural convection. In: Journal of Thermophysics, 13 (3). pp. 387-390.
Murthy, Srinivasa S and Ho, Clifford and Dutta, Pradip (2016) Special issue: Solar Energy Research Institute for India and the United States (SERIIUS) - Concentrated Solar Power. In: APPLIED THERMAL ENGINEERING, 109 (B). pp. 829-830.
Chakroborty, Suman and Dutta, Pradip (2001) A generalized formulation for evaluation of latent heat functions in enthalpy-based macroscopic models for convection-diffusion phase change processes. In: Metallurgical and Materials Transactions B, 32 (3). pp. 562-564.
