|
 | Up a level |
Tina, GA and Punetha, P and Adhikary, GD and Ranjan, R (2024) Simultaneous increase in piezoelectric response and Curie point in BaTiO3 based Pb-free piezoceramic. In: Scripta Materialia, 243 .
Gupta, H and Kapoor, R and Shinde, D and Makineni, SK (2024) Achieving ultra-high flow stress and hardness in a medium Mn stainless steel by the formation of strain-induced martensite and G-phase precipitates. In: Scripta Materialia, 241 .
Dash, A and Bhattacharyya, S and Paul, A (2023) Concepts for estimating all types of diffusion coefficients of NiCoFeCr multi-principal element alloys using two dissimilar or a combination of ideal and non-ideal pseudo-ternary diffusion couples. In: Scripta Materialia, 237 .
Samanta, S and Gangavarapu, S and Jayabalan, B and Makineni, SK and Dutta, M and Singh, SB (2023) Atomic-scale investigation of H-trapping by fine NbC precipitates in a low C ferritic steel. In: Scripta Materialia, 234 .
Sai, NJ and Rathore, P and Chauhan, A (2023) Machine learning-based predictions of fatigue life for multi-principal element alloys. In: Scripta Materialia, 226 .
Baler, N and Godha, A and Makineni, SK (2023) On the discontinuous precipitation during recrystallization in a multicomponent alloy. In: Scripta Materialia, 224 .
Mazumder, N and Kumar, D and Singh, MP and Makineni, SK and Mukhopadhyay, NK and Chattopadhyay, K (2023) Synergistic effect of multimodal γ’ precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy. In: Scripta Materialia, 223 .
Lu, K and Knöpfle, F and Chauhan, A and Litvinov, D and Schneider, M and Laplanche, G and Aktaa, J (2022) Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi. In: Scripta Materialia, 220 .
Kumar, H and Dash, A and Paul, A and Bhattacharyya, S (2022) A physics-informed neural network-based numerical inverse method for optimization of diffusion coefficients in NiCoFeCr multi principal element alloy. In: Scripta Materialia, 214 .
Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .
Vikram, RJ and Gupta, K and Suwas, S (2021) Design of a new cobalt base nano-lamellar eutectic high entropy alloy. In: Scripta Materialia, 202 .
Gupta, A and Srivastava, C (2021) Temperature driven texture and grain boundary engineering of electrodeposited β-Sn coatings and its effect on the coating corrosion behaviour: Five-parameter grain boundary character distribution analysis study. In: Scripta Materialia, 196 .
He, J and Wu, X and Guo, Y and Makineni, SK (2021) On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy. In: Scripta Materialia, 194 .
Pariyar, A and Toth, LS and Kailas, SV and Peltier, L (2021) Imparting high-temperature grain stability to an Al-Mg alloy. In: Scripta Materialia, 190 . pp. 141-146.
Rout, U and Tippireddy, S and Werbach, K and Pambannan, P and Rogl, G and Rogl, P and Mallik, RC (2020) Simultaneous optimization of power factor and thermal conductivity via Te and Se double substitution in Cu12Sb4S13 tetrahedrite. In: Scripta Materialia, 188 . pp. 151-156.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.
Karati, A and Hariharan, VS and Ghosh, S and Prasad, A and Nagini, M and Guruvidyathri, K and Mallik, RC and Shabadi, R and Bichler, L and Murty, BS and Varadaraju, UV (2020) Thermoelectric properties of half-Heusler high-entropy Ti2NiCoSn1-xSb1+ x (x = 0.5, 1) alloys with VEC>18. In: Scripta Materialia, 186 . pp. 375-380.
Nag, S and Narayan, RL and Jang, JI and Mukhopadhyay, C and Ramamurty, U (2020) Statistical nature of the incipient plasticity in amorphous alloys. In: Scripta Materialia, 187 . pp. 360-365.
Paul, Aloke (2017) Comments on “Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys” by K.Y. Tsai, M.H. Tsai and J.W. Yeh, Acta Materialia 61 (2013) 4887–4897. In: Scripta Materialia, 135 . pp. 153-157. ISSN 13596462
Zhao, Yakai and Lee, Dong-Hyun and Seok, Moo-Young and Lee, Jung-A and Phaniraj, MP and Suh, Jin-Yoo and Ha, Heon-Young and Kim, Ju-Young and Ramamurty, Upadrasta and Jang, Jae-il (2017) Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement. In: Scripta Materialia, 135 . pp. 54-58. ISSN 13596462
Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2012) Interrelation of grain boundary microstructure and texture in a hot rolled Ni-rich NiTi alloy. In: Scripta Materialia, 66 (8). pp. 602-605.
Biswas, Somjeet and Suwas, Satyam (2012) Evolution of sub-micron grain size and weak texture in magnesium alloy Mg-3Al-0.4Mn by a modified multi-axial forging process. In: Scripta Materialia, 66 (2). pp. 89-92.
Sharma, Garima and Sarkar, Apu and Varshney, Jalaj and Ramamurty, U and Kumar, Ajay and Gupta, SK and Chakravartty, JK (2011) Effect of irradiation on the microstructure and mechanical behavior of nanocrystalline nickel. In: Scripta Materialia, 65 (8). pp. 727-730.
Rajpalke, Mohana K and Roul, Basanta and Kumar, Mahesh and Bhat, Thirumaleshwara N and Sinha, Neeraj and Krupanidhi, SB (2011) Structural and optical properties of nonpolar (11-20) a-plane GaN grown on (1-102) r-plane sapphire substrate by plasma-assisted molecular beam epitaxy. In: Scripta Materialia, 65 (1). pp. 33-36.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2011) Formation of a single, rotated-Brass (1 1 0)< 5 5 6 > texture by hot cross-rolling of an Al-Zn-Mg-Cu-Zr alloy. In: Scripta Materialia, 64 (5). pp. 446-449.
Kiran, MSRN and Raidongia, Kalyan and Ramamurty, U and Rao, CNR (2011) Improved mechanical properties of polymer nanocomposites incorporating graphene-like BN: Dependence on the number of BN layers. In: Scripta Materialia, 64 (6). pp. 592-595.
Prasad, MJNV and Chokshi, AH (2011) On the exothermic peak during annealing of electrodeposited nanocrystalline nickel. In: Scripta Materialia, 64 (6). pp. 544-547.
Gollapudi, S and Azeem, MA and Tewari, A and Ramamurty, U (2011) Orientation dependence of the indentation impression morphology in a Mg alloy. In: Scripta Materialia, 64 (2). pp. 189-192.
Yoo, Byung-Gil and Kim, Kyu-Sik and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2010) Room temperature creep in amorphous alloys: Influence of initial strain and free volume. In: Scripta Materialia, 63 (12). pp. 1205-1208.
Korla, Rajesh and Chokshi, Atul H (2010) Strain-rate sensitivity and microstructural evolution in a Mg-Al-Zn alloy. In: Scripta Materialia, 63 (9). pp. 913-916.
Narayan, RL and Boopathy, Kombaiah and Sen, Indrani and Hofmann, DC and Ramamurty, U (2010) On the hardness and elastic modulus of bulk metallic glass matrix composites. In: Scripta Materialia, 63 (7). pp. 768-771.
Prasad, MJNV and Chokshi, AH (2010) Extraordinary high strain rate superplasticity in electrodeposited nano-nickel and alloys. In: Scripta Materialia, 63 (1). pp. 136-139.
Jacob, KT and Rajithaa, G and Reddy, SNS (2010) Reactive interdiffusion: deviation from local equilibrium in the Fe-NiTiO3 couple. In: Scripta Materialia, 63 (2). pp. 204-206.
Divya, VD and Balam, SSK and Ramamurty, U and Paul, A (2010) Interdiffusion in the Ni-Mo system. In: Scripta Materialia, 62 (8). pp. 621-624.
Raghavan, R and Boopathy, K and Ghisleni, R and Pouchon, MA and Ramamurty, U and Michler, J (2010) Ion irradiation enhances the mechanical performance of metallic glasses. In: Scripta Materialia, 62 (7). pp. 462-465.
Mukherjee, R and Abinandanan, TA and Gururajan, MP (2010) Precipitate growth with composition-dependent diffusivity: Comparison between theory and phase field simulations. In: Scripta Materialia, 62 (2). pp. 85-88.
Yoo, Byung-Gil and Kim, Yong-Jae and Oh, Jun-Hak and Ramamurty, U and Jang, Jae-il (2009) On the hardness of shear bands in amorphous alloys. In: Scripta Materialia, 61 (10). pp. 951-954.
Mukherjee, M and Kolluri, M and Garcia-Moreno, F and Banhart, J and Ramamurty, U (2009) Strain hardening during constrained deformation of metal foams - Effect of shear displacement. In: Scripta Materialia, 61 (7). pp. 752-755.
Paul, A (2009) Comments on "Room temperature interfacial reactions in electrodeposited Au/Sn couples". In: Scripta Materialia, 61 (6). pp. 561-563.
Patil, Swapnil D and Narasimhan, R and Mishra, Raja K (2009) Observation of kink shear bands in an aluminium single crystal fracture specimen. In: Scripta Materialia, 61 (5). pp. 465-468.
Sharma, Prithu and Biswas, Krishanu and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2009) Size effect on the lattice parameter of KCl during mechanical milling. In: Scripta Materialia, 61 (6). pp. 600-603.
Ajikumar, PK and Kamruddin, M and Shankar, P and Gouda, Ramakrishna and Balamurugan, AK and Nithya, R and Tyagi, AK and Jayaram, V and Biswas, SK and Raj, Baldev (2009) Internal nitride formation during gas-phase thermal nitridation of titanium. In: Scripta Materialia, 61 (4). pp. 403-406.
Karagadde, Shyamprasad and Sundarraj, Suresh and Dutta, Pradip (2009) Modeling growth of hydrogen bubbles in aluminum castings using the level-set method. In: Scripta Materialia, 61 (2). pp. 216-219.
Chokshi, Atul H (2009) Unusual stress and grain size dependence for creep in nanocrystalline materials. In: Scripta Materialia, 61 (1). pp. 96-99.
Anantheshwara, K and Selvan, K Arul and Mishra, Raja K and Bobji, MS (2009) In situ transmission electron microscopy study of deformation of an aluminum alloy tribolayer. In: Scripta Materialia, 60 (8). pp. 623-626.
Dubach, A and Raghavan, R and Loeffler, JF and Michler, J and Ramamurty, U (2009) Micropillar compression studies on a bulk metallic glass in different structural states. In: Scripta Materialia, 60 (7). pp. 567-570.
Kumar, AK and Laurila, T and Vuorinen, V and Paul, A (2009) Determination of diffusion parameters and activation energy of diffusion in V3Si phase with A15 crystal structure. In: Scripta Materialia, 60 (6). pp. 377-380.
Chokshi, Atul H (2008) Triple junction limited grain growth in nanomaterials. In: Scripta Materialia, 59 (7). pp. 726-729.
Raghavan, R and Ayer, R and Jin, HW and Marzinsky, CN and Ramamurty, U (2008) Effect of shot peening on the fatigue life of a Zr-based bulk metallic glass. In: Scripta Materialia, 59 (2). pp. 167-170.
Chen, N and Yao, Kefu and Louzguine-Luzgin, DV and Qiu, Shengbao and Ranganathan, S and Inoue, A (2007) Phase transformations in the rapidly solidified Ti40Zr20Hf20Pd20 alloy. In: Scripta Materialia, 57 (7). pp. 631-634.
Viswanath, B and Raghavan, R and Ramamurty, U and Ravishankar, N (2007) Mechanical properties and anisotropy in hydroxyapatite single crystals. In: Scripta Materialia, 57 (4). pp. 361-364.
Azeem, MA and Shortall, C and Ramamurty, U (2007) Tensile properties of stainless steel sandwich sheets with fibrous cores. In: Scripta Materialia, 57 (3). pp. 221-224.
Prasad, Eswar K and Raghavan, R and Ramamurty, U (2007) Temperature dependence of pressure sensitivity in a metallic glass. In: Scripta Materialia, 57 (2). pp. 121-124.
Viswanath, B and Ravishankar, N (2006) Interfacial reactions in hydroxyapatite/alumina nanocomposites. In: Scripta Materialia, 55 (10). pp. 863-866.
Sreekala, S and Ananthakrishna, G (2006) A model for ferromagnetic martensites. In: Scripta Materialia, 54 (10). pp. 1809-1814.
Biswas, Krishanu and Basu, B and Suri, AK and Chattopadhyay, K (2006) A TEM study on TiB2-20%MoSi2 composite: Microstructure development and densification mechanism. In: Scripta Materialia, 54 (7). pp. 1363-1368.
Karthikeyan, S and Unocic, RR and Sarosi, PM and Viswanathan, GB and Whitis, DD and Mills, MJ (2006) Modeling microtwinning during creep in Ni-based superalloys. In: Scripta Materialia, 54 (6). pp. 1157-1162.
Kottada, Ravi S and Chokshi, Atul H (2005) Low temperature compressive creep in electrodeposited nanocrystalline nickel. In: Scripta Materialia, 53 (8). pp. 887-892.
Chollacoop, N and Ramamurty, U (2005) Experimental assessment of the representative strains in instrumented sharp indentation. In: Scripta Materialia, 53 (2). pp. 247-251.
Chen, N and Louzguine-Luzgin, DV and Kubota, T and Ranganathan, S and Inoue, A (2005) Formation of amorphous and icosahedral phases in Ti-Zr-Hf-LTM (LTM =Ni, Pd or Pt) alloys. In: Scripta Materialia, 53 (2). pp. 213-216.
Ananthakrishna, G and Fressengeas, C (2005) Comment on: Dislocation dynamics is chaotic. In: Scripta Materialia, 52 (5). pp. 425-428.
Roy, Nilima and Godiwalla, Kersi M and Dwarakadasa, Eswarahalli S and Ray, Ashok Kumar (2004) Elasto-plastic deformation in thermal barrier coated superalloys. In: Scripta Materialia, 51 (7). 739 -743.
Ramachandra, S and Kumar, Sudheer P and Ramamurty, U (2003) Impact energy absorption in an Al foam at low velocities. In: Scripta Materialia, 49 (8). pp. 741-745.
Bharathi, MS and Rajesh, S and Ananthakrishna, G (2003) A dynamical model for the Portevin-le Chatelier bands. In: Scripta Materialia, 48 (9). pp. 1355-1360.
Chokshi, Atul H (2003) Diffusion, diffusion creep and grain growth characteristics of nanocrystalline and fine-grained monoclinic, tetragonal and cubic zirconia. In: Scripta Materialia, 48 (6). pp. 791-796.
Ramamurty, U and Lee, ML and Basu, J and Li, Y (2002) Embrittlement of a bulk metallic glass due to low-temperature annealing. In: Scripta Materialia, 47 (2). pp. 107-111.
Johannesson, B and Ogin, SL and Surappa, MK and Tsakiropoulos, P and Brynjolfsson, S and Thorbjornsson, IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. In: Scripta Materialia, 45 (8). pp. 993-1000.
Chokshi, Atul H (2001) On the emergence of new surface grains during superplastic deformation. In: Scripta Materialia, 44 (11). pp. 2611-2615.
Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Guerault, H and Greneche, JM (2001) Ferrimagnetic Ordering In Nanostructured Zinc Ferrite. In: Scripta Materialia, 44 (8-9). pp. 1407-1410.
Ponpandian, N and Greneche, JM and Guerault, H and Nakatsuka, K and Chinnasamy, CN and Narayanasamy, A and Justin, Joseyphus R and Chattopadhyay, K and Shinoda, K and Tohji, K and Jeyadevan, B (2001) Structure and magnetic properties of nanocrystalline ferrimagnetic CdFe2O4 spinel. In: Scripta Materialia, 44 (8-9). 1411-1415 .
Anuradha, TV and Ranganathan, S and Mimani, T and Patil, KC (2001) Combustion synthesis of nanostructured barium titanate. In: Scripta Materialia, 44 (8-9). pp. 2237-2241.
Bysakh, Sandip and Das, PK and Chattopadhyay, K (2001) Evolution of Metastable Microstructures in Laser Ablation Deposited $Ni_{75}Al_{25}$ Thin Films. In: Scripta Materialia, 44 (8-9). pp. 1847-1851.
Ranganathan, S and Divakar, R and Raghunathan, VS (2001) Interface Structures in Nanocrystalline Materials. In: Scripta Materialia, 44 (8-9). pp. 1169-1174.
Bhattacharya, Victoria and Chattopadhyay, Kamanio (2001) Microstructure and Tribological Behaviour of Nano-Embedded AI-Alloys. In: Scripta Materialia, 44 (8-9). pp. 1677-1682.
Bhattacharya, P and Bysakh, S and Ishihara, KN and Chattopadhyay, K (2001) New observation on heating Ni-Al multilayers of 10 nm periodicity. In: Scripta Materialia, 44 (8-9). pp. 1831-1835.
Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 Mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.
Chokshi, Atul H (2000) The Role of Diffusion Creep in the Superplastic Deformation of 3 mol% Yttria Stabilized Tetragonal Zirconia. In: Scripta Materialia, 42 (3). pp. 241-248.
Satapathy, LN and Kottada, RS and Chokshi, AH (1999) An Experimental Technique For Fabricating Tensile Ceramic Specimens. In: Scripta Materialia, 41 (10). pp. 1091-1095.
Jayaganthan, R and Hajra, JP (1998) Activities of Al in the Al-Ga-In-Sb system in the temperature range of 1073-1273 K. In: Scripta Materialia, 39 (1). pp. 1-5.
Narayan, SP and Basu, K and Prasad, YVRK and Jayaram, V and Das, BN (1998) A study of the formability of melt spun Nd-Fe-B magnets. In: Scripta Materialia, 38 (11). pp. 1725-1730.
Srinivasan, Dheepa and Jayaram, Vikram and Das, PK and Chattopadhyay, K (1998) Nanodispersed Microstructures on Laser Mixing of Al-Ni Multilayers. In: Scripta Materialia, 38 (6). pp. 857-861.
Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.
Padmapriya, P and Abinandanan, TA and Jayaram, Vikram (1997) coarsening of an interconnected microstructure in an al-al2o3 composite. In: Scripta Materialia, 37 (12). pp. 1883-1888.
Srinivasan, VS and Sandhya, R and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel. In: Scripta Materialia, 37 (10). pp. 1593-1598.
Jayaganthan, R and Hajra, JP (1997) Applicability of a dilute quaternary model in interpreting the thermodynamic properties of the Fe-Ni-Ta-N system. In: Scripta Materialia, 37 (10). pp. 1539-1544.
Ravikiran, A and Surappa, MK (1997) Oscillations in coefficient of friction during dry sliding of A356 Al-30% wt SiCp MMC against steel. In: Scripta Materialia, 36 (1). pp. 95-98.
Kutty, TRG and Ganguly, C and Sastry, DH (1996) Development of creep curves from hot indentation hardness data. In: Scripta Materialia, 34 (12). pp. 1833-1838.
Chokshi, Atul H (1996) An Analysis of Creep Deformation in Nanocrystalline Materials. In: Scripta Materialia, 34 (12). pp. 1905-1910.
Bravo-León, Alfonso and Jiménez-Melendo, Manuel and Domínguez-Rodríguez, Arturo and Chokshi, Atul H (1996) The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals. In: Scripta Materialia, 34 (7). pp. 1155-1160.
