|
 | Up a level |
Ramkumar, KR and Park, H and Lee, J and Kwon, H and Vikram, RJ and Kim, ES and Zaragaran, A and Kim, HS (2023) Development of a novel CoCrNi-based eutectic high entropy alloy for a wide temperature range. In: Materials Science and Engineering: A, 885 .
Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2023) Micro-mechanisms underlying enhanced fatigue life of additively manufactured 316L stainless steel with a gradient heterogeneous microstructure. In: Materials Science and Engineering: A, 886 .
Sisodia, S. and Jananandhan, S. and Pakki, V.K. and Konkati, C. and Chauhan, A. (2023) Towards reducing tension-compression yield and cyclic asymmetry in pure magnesium and magnesium-aluminum alloy with cerium addition. In: Materials Science and Engineering: A, 886 .
Mohan, A and Menon, R (2023) Electric field and temperature dependent conductivity in PEDOT:PSS/PVA. In: Materials Science and Engineering: A, 881 .
Kanjilal, Anwesha and Narayanan P, Ramesh and Kumar, Praveen (2022) Transition from necking to cavitation driven tertiary creep with length scale in constrained ductile metal joints. In: Materials Science and Engineering: A, 845 . ISSN 09215093
Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructural and mechanical behavior study of suction cast Nb-Si binary alloys. In: Materials Science and Engineering: A, 583 . pp. 188-198.
Yoo, Byung-Gil and Choi, In-Chul and Kim, Yong-Jae and Ramamurty, Upadrasta and Jang, Jae-il (2013) Room-temperature anelasticity and viscoplasticity of Cu-Zr bulk metallic glasses evaluated using nanoindentation. In: Materials Science and Engineering: A, 577 . pp. 101-104.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminum alloy sheets. In: Materials Science and Engineering: A, 577 . pp. 87-100.
Singh, Gaurav and Bajargan, Govind and Datta, Ranjan and Ramamurty, Upadrasta (2013) Effect of hydrogen charging on tensile properties of B-modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 576 . pp. 326-336.
Roy, Shibayan and Suwas, Satyam (2013) Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy. In: Materials Science and Engineering: A, 574 . pp. 205-217.
Zachariah, Z and Tatiparti, Sankara Sarma V and Mishra, SK and Ramakrishnan, N and Ramamurty, U (2013) Tension-compression asymmetry in an extruded Mg alloy AM30: temperature and strain rate effects. In: Materials Science and Engineering: A, 572 . pp. 8-18.
Babu, Prasath R and Karthikeyan, S (2013) Effect of stress orientation on microstructural evolution during creep of near-lamellar Ti-47Al-2Cr-2Nb. In: Materials Science and Engineering: A, 564 . pp. 218-231.
Patel, Manish and Reddy, JJ and Prasad, Bhanu VV and Subrahmanyam, J and Jayaram, Vikram (2012) Residual strength of hot pressed zirconium diboride (ZrB2) after exposure to high temperatures. In: Materials Science and Engineering: A, 535 . pp. 189-196.
Singh, PS and Narayan, RL and Sen, Indrani and Hofmann, DC and Ramamurty, U (2012) Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite. In: Materials Science and Engineering: A, 534 . pp. 476-484.
Gupta, Neha and Mukhopadhyay, Amartya and Pavani, K and Basu, Bikramjit (2012) Spark plasma sintering of novel ZrB2-SiC-TiSi2 composites with better mechanical properties. In: Materials Science and Engineering: A, 534 . pp. 111-118.
Anilchandra, AR and Surappa, MK (2012) Microstructure and damping behaviour of consolidated magnesium chips. In: Materials Science and Engineering: A, 542 . pp. 94-103.
Roy, Shibayan and Sarkar, Apu and Suwas, Satyam (2010) On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 528 (1). pp. 449-458.
Alaneme, KK and Hong, SM and Sen, Indrani and Fleury, E and Ramamurty, U (2010) Effect of copper addition on the fracture and fatigue crack growth behavior of solution heat-treated SUS 304H austenitic steel. In: Materials Science and Engineering: A, 527 (18-19). pp. 4600-4604.
Sen, Indrani and Maheshwari, L and Tamirisakandala, S and Miracle, DB and Ramamurty, U (2009) Micromechanisms of damage in a hypereutectic Ti-6Al-4V-B alloy. In: Materials Science and Engineering: A, 518 (1-2). pp. 162-166.
Gurao, Nilesh P and Ashkar, Ali A and Suwas, Satyam (2009) Study of texture evolution in metastable beta-Ti alloy as a function of strain path and its effect on alpha transformation texture. In: Materials Science and Engineering: A, 504 (1-2). pp. 24-35.
Prasad, MJNV and Suwas, S and Chokshi, AH (2009) Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain-size distribution. In: International Symposium on Bulk Nanostructured Materials: from Fundamentals to Innovation, BNM 2007, AUG 14-18, 2007, Ufa State Aviat Tech Univ, Ufa, Russia, pp. 86-91.
Raju, Sitarama K and Krishna, Ghanashyam M and Padmanabhan, KA and Muraleedharan, K and Gurao, NP and Wilde, G (2008) Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel. In: Materials Science and Engineering: A, 491 (1-2). pp. 1-7.
Chokshi, Atul H (2008) Diffusion creep in metals and ceramics: Extension to nanocrystals. In: Materials Science and Engineering: A, 483-48 . pp. 485-491.
Dey, SR and Suwas, Satyam and Fundenberger, JJ and Zou, JX and Grosdidier, T and Ray, RK (2008) Evolution of hot rolling texture in \beta (B2)-phase of a two-phase (O+B2) titanium–aluminide alloy. In: Materials Science and Engineering: A, 483-48 . pp. 551-554.
Unocic, RR and Viswanathan, GB and Sarosi, PM and Karthikeyan, S and Li, J and Mills, MJ (2008) Mechanisms of creep deformation in polycrystalline Ni-base disk superalloys. In: Materials Science and Engineering: A, 483-48 . pp. 25-32.
Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.
Sudarshan, * and Surappa, MK (2008) Synthesis of fly ash particle reinforced A356 Al composites and their characterization. In: Materials Science and Engineering: A, 480 (1-2). pp. 117-124.
Suwas, Satyam and Gottstein, G and Kumar, R (2007) Evolution of Crystallographic Texture during equal channel Angular Extrusion (ECAE) and its effects on secondary processing of magnesium. In: Materials Science and Engineering: A, 471 (1-2). pp. 1-14.
Suresh, N and Ramamurty, U (2007) Effect of aging on mechanical behavior of single crystal Cu–Al–Ni shape memory alloys. In: Materials Science and Engineering: A, 454 . pp. 492-499.
Devarajan, A and Khadar, Abdul M and Chattopadhyay, K (2007) Effect of ball milling on chemically synthesized nanoparticles of $CaCO_3$. In: Materials Science and Engineering: A, 452-45 . pp. 395-400.
Kumar, Subodh and Dieringa, Hajo and Kainer, Karl-Ulrich (2007) Thermal cycling behaviour of the magnesium alloy based hybrid composites in the transverse direction. In: Materials Science and Engineering: A, 454-45 . pp. 367-370.
Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR and Goswam, B and Sahu, JK and Whittenberger, JD (2007) Fatigue behavior of a thermal barrier coated superalloy at $800 ^0 C$. In: Materials Science and Engineering: A, 448 (1-2). pp. 294-298.
Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Gradient syntactic foams: Tensile strength, modulus and fractographic features. In: Materials Science and Engineering: A, 412 (1&2). pp. 153-158.
Chokshi, Atul H (2005) Cavity nucleation and growth in superplasticity. In: Materials Science and Engineering: A, 410 . pp. 95-99.
Shabadi, Rajashekhar and Kumar, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Effect of specimen condition, orientation and alloy composition on PLC band parameters. In: Materials Science and Engineering: A, 382 (1-2). pp. 203-208.
Phanikumar, Gandham and Dutta, Pradip and Galun, Rolf and Chattopadhyay, Kamanio (2004) Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy. In: Materials Science and Engineering: A, 371 (1-2). pp. 91-102.
Allen, CM and Kumar, S and Cama, H and O'Reilly, KAQ and Carroll, L (2001) Electron beam surface melting of model 1200 Al alloys. In: Materials Science and Engineering: A, 304-6 . pp. 604-607.
Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K (2001) The influence of Fe3+ ions at tetrahedral sites on the magnetic properties of nanocrystalline ZnFe2O4. In: Materials Science and Engineering: A, 304-6 . pp. 983-987.
Wang, RM and Surappa, KM and Tao, CH and Li, CZ and Yan, MG (1998) Microstructure and interface structure studies of SiCp-reinforced Al (6061) metal-matrix composites. In: Materials Science and Engineering: A, 252 (1-2). pp. 219-226.
Radhakrishna Bhat , BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014---20vol.%Al2O3 metal matrix composite. In: Materials Science and Engineering: A, 212 (1). 178-181 .
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.
Padmavardhani, D and Prasad, YVRK (1992) Effect of zinc content on the processing map for hot working of α brass. In: Materials Science and Engineering: A, 157 (1). pp. 43-51.
Murty, BS and Ranganathan, S and Rao, Mohan M (1992) Solid state amorphization in binary Ti---Ni, Ti---Cu and ternary Ti---Ni---Cu system by mechanical alloying. In: Materials Science and Engineering: A, 149 (2). pp. 231-240.
Brown, CA and Surappa, MK (1988) The machinability of a cast aluminium alloy-graphite particle composite. In: Materials Science and Engineering: A, 102 (1). pp. 31-37.
