Mandal, Sourav and Basu, Bikramjit (2018) Probing the influence of post-processing on microstructure and in situ compression failure with in silico modeling of 3D-printed scaffolds. In: JOURNAL OF MATERIALS RESEARCH, 33 (14). pp. 2062-2076.
![]() |
PDF
jou_mat_res_33-14_2062-2076_2018.pdf - Published Version Restricted to Registered users only Download (951kB) | Request a copy |
Abstract
The post-processing treatment plays an important role in tailoring the mechanical and biological properties of the three-dimensional powder-printed porous scaffolds. Depending on scaffold material composition, a combination of post-processing treatments can be used to tailor these properties. This work probes into the impact of post-processing on the microstructure and deformation behavior of 3D-printed scaffolds. In this study, we have chosen CaSO4.xH(2)O (POP), a system for 3D powder printing and two different post-processing methodologies, namely chemical conversion and polymer infiltration. POP-based scaffolds were fabricated using water-based binder with up to 55% interconnected microporosity and moderate compressive strength of 1.5 MPa. Microcomputed tomography (mu CT) is extensively utilized to determine the accuracy and efficacy of the adopted printing and post-processing approach. It was shown that the reproducibility of the fine features depends not only on the size but also on the presence of neighboring features. Crucially, mu CT-based microstructure modeling and finite elemental simulation were attempted to computationally capture the compression behavior, in silico. Finally, in situ compression coupled with mu CT imaging provided us an insight into fracture behavior of 3D powder-printed scaffolds.
Item Type: | Journal Article |
---|---|
Publication: | JOURNAL OF MATERIALS RESEARCH |
Publisher: | Cambridge University Press |
Additional Information: | The Copyright of this article belong to the Cambridge University Press. |
Keywords: | 3D powder printing (3DPP); ceramic biomaterial; in silico; in situ; microcomputed tomography (CT) |
Department/Centre: | Division of Chemical Sciences > Materials Research Centre Division of Interdisciplinary Sciences > Centre for Biosystems Science and Engineering |
Date Deposited: | 17 Aug 2018 14:15 |
Last Modified: | 03 Aug 2022 05:46 |
URI: | https://eprints.iisc.ac.in/id/eprint/60445 |
Actions (login required)
![]() |
View Item |