|
 | Up a level |
Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.
Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.
Jaya, BN and Jayaram, V (2017) The edge-notched clamped beam as a fracture toughness test geometry: Crack stability and analytical expressions for the stress intensity factor. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 83-84.
Majumder, S and Sivakumar, G and Jayaram, V and Srinivasan, D (2024) Oxidation behaviour and thermal cycling response of HVAF and HVA(O)F NiCoCrAlY coatings. In: Journal of Materials Science .
Bansal, U and Esakkiraja, N and Baskaran, T and Paul, T and Ravi, R and Kumar, P and Jayaram, V and Paul, A (2024) Synergistic effects of Pt and Y addition in (Ni, Pt)CrAlY bond coat on oxide spallation resistance and growth of interdiffusion zone between bond coat and Ni-based single crystal superalloy. In: Corrosion Science, 240 .
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy. In: Acta Materialia, 266 .
Goel, P and Pramanik, A and Jayaram, V and Banerjee, D and Kumar, P (2024) High-throughput estimation of transient creep response of a Ti6Al alloy using bending. In: Journal of Materials Research .
Chakraborty, S and Yurchenko, SN and Georges, R and Simon, A and Lacinbala, O and Chandrasekaran, V and Jayaram, V and Dartois, E and Kassi, S and Gusdorf, A and Lesaffre, P and Jagadeesh, G and Arunan, E and Biennier, L (2024) Laboratory investigation of shock-induced dissociation of buckminsterfullerene and astrophysical insights. In: Astronomy and Astrophysics, 681 .
Hijazi, F and Pavan, AHV and Jayaram, V and Kumar, P (2024) Material volume reduction for creep testing using composite cantilevers and its application for residual life assessment. In: Materials Science and Engineering: A, 918 .
Parameswaran, G and Jayaram, V and Kailas, SV (2024) Predicting Low Sliding Friction in Al-Steel Reciprocating Sliding Experiment after a Controlled Grinding of the Steel Counterface. In: Lubricants, 12 (8).
Kulkarni, A and Srinivasan, D and Ravanappa, P and Jayaram, V and Kumar, P (2023) Creep behavior of additively manufactured high strength A205 aluminum alloy. In: Additive Manufacturing Letters, 6 .
Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.
Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .
Goel, P and Kumar, P and Jayaram, V (2023) Estimation of stress redistribution for the extraction of power law creep parameters from bending. In: Mechanics of Materials, 177 .
Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.
Singh, SP and Jayaram, V and Srinivasan, D and Kumar, P (2022) High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy. In: Additive Manufacturing, 58 .
Roy, A and Singh, SV and Ambresh, M and Sahu, D and Meka, JK and Ramachandran, R and Samarth, P and Pavithraa, S and Jayaram, V and Hill, H and Cami, J and Rajasekhar, BN and Janardhan, P and Bhardwaj, A and Mason, NJ and Sivaraman, B (2022) Shock processing of amorphous carbon nanodust. In: Advances in Space Research .
Jayaram, V (2022) Small-Scale Mechanical Testing. In: Annual Review of Materials Research, 52 . pp. 473-523.
Jayaram, K and Prakash, G and Jayaram, V (2022) Convolutional neural network for classification of SiO2 scanning electron microscope images. In: International Journal of Business Intelligence and Data Mining, 21 (1). pp. 118-128.
Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .
Sunder, R and Raut, D and Jayaram, V and Kumar, P and Shastri, V (2021) Near-tip residual stress as an independent load interaction mechanism. In: International Journal of Fatigue, 151 .
Lal, D and Kumar, P and Bathe, R and Sampath, S and Jayaram, V (2021) Effect of microstructure on fracture behavior of freestanding plasma sprayed 7 wt.% Y2O3 stabilized ZrO2. In: Journal of the European Ceramic Society, 41 (7). pp. 4294-4301.
Senthil Kumar, S and Jayaram, V and Aruna, ST (2021) Enhanced power density in hydrocarbon-compatible anode-supported solid oxide fuel cell facilitated by a functional anode catalyst layer. In: Nanomaterials and Energy, 10 (2). pp. 118-127.
Venkatraman, K and Jayaram, V (2021) Crack velocity measurements through continuous stiffness monitoring of cyclically loaded notched micro-beams of thin graded Pt–Ni-Al bond coats. In: International Journal of Fracture, 227 (1). pp. 15-37.
Surendra, VS and Jayaram, V and Muruganantham, M and Vijay, T and Vijayan, S and Samarth, P and Hill, H and Bhardwaj, A and Mason, NJ and Sivaraman, B (2021) Complex structures synthesized in shock processing of nucleobases - Implications to the origins of life. In: International Journal of Astrobiology .
Kumawat, MK and Sarkar, R and Jayaram, V and Alam, MZ (2021) Fatigue behavior of a freestanding Pt-aluminide (PtAl) bond coat at ambient temperature. In: Surface and Coatings Technology, 427 .
Kannan, R and Rangaraj, L and Jayaram, V (2021) Reactive hot pressing of TiC0.5 ceramic at low applied pressure with 1 wt Ni additive. In: Journal of the American Ceramic Society .
Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.
Esakkiraja, N and Gupta, A and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2020) Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy. In: Acta Materialia, 195 (15). pp. 35-49.
Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.
Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.
Mishra, AK and Lambai, A and Jayaram, V and Jaya, BN (2020) The edge-notched clamped beam bend specimen as a fracture toughness test geometry. In: Theoretical and Applied Fracture Mechanics, 105 .
Jayaram, K and Prakash, G and Jayaram, V (2020) Automatic extraction of rarely explored materials and methods sections from research journals using machine learning techniques. In: International Journal of Advanced Computer Science and Applications, 11 (8). pp. 447-456.
Senthil Kumar, SS and Jayaram, V and Aruna, ST (2020) Co-fired anode-supported solid oxide fuel cell for internal reforming of hydrocarbon fuel. In: Energy, Ecology and Environment, 6 (1). pp. 55-68.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.
Sudarshan, B and Deep, S and Jayaram, V and Jagadeesh, G and Saravanan, S (2019) Experimental study of forward-facing cavity with energy deposition in hypersonic flow conditions. In: Physics of Fluids, 31 (10).
Kumar, SS and Jayaram, V and Ojha, PK and Badi, SP and Aruna, ST (2018) Co-Cu-YSZ-GDC as an anode material for internal reforming SOFC? In: Nanomaterials and Energy, 7 (2). pp. 44-51.
Pal, S and Jayaram, V (2018) Effect of microstructure on the hardness and dry sliding behavior of electroless Ni–B coating. In: Materialia, 4 . pp. 47-64.
Alam, Zafir Md and Kamat, SV and Jayaram, V and Karamched, Phani S and Ghosal, P and Das, DK (2014) Dynamic recovery and recrystallization during high-temperature tensile deformation of a free-standing Pt-aluminide bond coat. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 604 . pp. 18-22.
Alam, Md Zafir and Kamat, SV and Jayaram, V and Das, DK (2014) Micromechanisms of fracture and strengthening in free-standing Pt-aluminide bond coats under tensile loading. In: ACTA MATERIALIA, 67 . pp. 278-296.
Reddy, Koteeswara N and Jayaram, V and Arunan, E and Kwon, YB and Moon, WJ and Reddy, KPJ (2013) Investigations on high enthalpy shock wave exposed graphitic carbon nanoparticles. In: Diamond and Related Materials, 35 . pp. 53-57.
Vasu, K and Matte, HSSR and Shirodkar, Sharmila N and Jayaram, V and Reddy, KPJ and Waghmare, Umesh V and Rao, CNR (2013) Effect of high-temperature shock-wave compression on few-layer MoS2, WS2 and MoSe2. In: CHEMICAL PHYSICS LETTERS, 582 . pp. 105-109.
Alam, Md Zafir and Kamat, SV and Jayaram, V and Das, Dipak K (2013) Tensile behavior of a free-standing Pt-aluminide (PtAl) bond coat. In: ACTA MATERIALIA, 61 (4). pp. 1093-1105.
Saha, BP and Johnson, R and Jayaram, V (2012) COMPARATIVE EVALUATION OF THERMAL CONDUCTIVITY OF ZIRCONIA SOLID AND HONEYCOMB STRUCTURES. In: EXPERIMENTAL HEAT TRANSFER, 25 (4). pp. 267-281.
Sivaraman, B and Jayaram, V and Harish, HP (2012) Meteorite or meteor'wrong'. In: CURRENT SCIENCE, 103 (12). p. 1404.
Salas, O and Ni, H and Jayaram, V and Vlach, KC and Levi, CG and Mehrabian, R (1991) Nucleation and growth of Al2O3/metal composites by oxidation of aluminum alloys. In: Journal of Materials Research, 6 (9). pp. 1964-1981.
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Corrigendum to �Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bond coats and Ni-based single crystal superalloy� Acta Mater. 266 (2024) 119687 (Acta Materialia (2024) 266, (S1359645424000405), (10.1016/j.actamat.2024.119687)). In: Acta Materialia, 277 .
