Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials

Saha, SK and Srinivasan, K and Dutta, P (2008) Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials. In: Journal of Heat Transfer, 130 (3). 034505-1-034505-4.

PDF asme.pdf Restricted to Registered users only Download (468kB) | Request a copy

Abstract

This paper deals with phase change material (PCM), used in conjunction with thermal conductivity enhancer (TCE), as a means of thermal management of electronic systems. Eicosane is used as PCM, while aluminium pin or plate fins are used as TCE. The test section considered in all cases is a 42 \times 42 $mm^2$ base with a TCE height of 25 mm. An electrical heater at the heat sink base is used to simulate the heat generation in electronic chips. Various volumetric fractions of TCE in the conglomerate of PCM and TCE are considered. The case with 8% TCE volume fraction was found to have the best thermal performance. With this volume fraction of TCE, the effects of fin dimension and fin shape are also investigated. It is found that a large number of small cross-sectional area fins is preferable. A numerical model is also developed to enable an interpretation of experimental results.

Item Type:	Journal Article
Publication:	Journal of Heat Transfer
Publisher:	ASME
Additional Information:	Copyright of this article belongs to ASME.
Keywords:	heat sink;phase change material;thermal conductivity enhancer.
Department/Centre:	Division of Mechanical Sciences > Mechanical Engineering
Date Deposited:	19 May 2008
Last Modified:	19 Sep 2010 04:45
URI:	http://eprints.iisc.ac.in/id/eprint/14015

Actions (login required)

View Item