|
 | Up a level |
Pratap Singh, Akhand and Gupta, Abhay and Sai Jyotheender, K and Srivastava, Chandan (2022) Effect of Zn Incorporation on the Evolution of Texture, Strain, Grain Boundary Constitution, and Corrosion Behavior of Electrodeposited SnZn Coatings. In: Metallurgical and Materials Transactions A . ISSN 1073-5623
Suresh, KS and Rollett, AD and Suwas, Satyam (2013) Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer. In: Metallurgical and Materials Transactions A, 44A (8). pp. 3866-3881.
Roy, Shibayan and Karanth, S and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: part II. static annealing in (alpha plus beta) regime. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3322-3336.
Roy, Shibayan and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I. hot rolling in (alpha plus beta) phase field. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3303-3321.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part I. evolution of microstructure and texture. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2746-2763.
Mondal, Chandan and Singh, AK and Mukhopadhyay, AK and Chattopadhyay, K (2013) Effects of different modes of hot cross-rolling in 7010 aluminum alloy: part II. mechanical properties anisotropy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2764-2777.
Nandi, Proloy and Suwas, Satyam and Kumar, Subodh and Chattopadhyay, Kamanio (2013) The effect of minor addition of Ni on the microstructural evolution and mechanical properties of suction cast Al-0.14 at. pct Sc binary alloy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2591-2603.
Santra, Sangeeta and Mondal, Avik and Paul, Aloke (2012) Interdiffusion in the Fe-Pt System. In: Metallurgical and Materials Transactions A, 43A (3). pp. 791-795.
Kumar, Pankaj and Gurao, Nilesh P and Haldar, Arunansu and Suwas, Satyam (2012) Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression. In: Metallurgical and Materials Transactions A, 43A (6). pp. 2043-2055.
Balam, SSK and Dong, HQ and Laurila, T and Vuorinen, V and Paul, A (2011) Diffusion and Growth of the mu Phase (Ni6Nb7) in the Ni-Nb System. In: Metallurgical and Materials Transactions A, 42A (7). pp. 1727-1731.
Alam, Zafir Md and Chatterjee, Debarati and Muraleedharan, K and Nandy, TK and Kamat, SV and Jayaram, V and Das, DK (2011) Effect of Strain Rate on Ductile-to-Brittle Transition Temperature of a Free-Standing Pt-Aluminide Bond Coat. In: Metallurgical and Materials Transactions A, 42 (6). pp. 1431-1434.
Verma, Akash and Biswas, Krishanu and Tiwary, Chandra Sekhar and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2011) Combined Cryo and Room-Temperature Ball Milling to Produce Ultrafine Halide Crystallites. In: Metallurgical and Materials Transactions A, 42A (4). pp. 1127-1137.
Paul, A and Ghosh, C and Boettinger, WJ (2011) Diffusion Parameters and Growth Mechanism of Phases in the Cu-Sn System. In: Metallurgical and Materials Transactions A, 42A (4). pp. 952-963.
Roy, Shibayan and Tungala, Vedavyas and Suwas, Satyam (2011) Effect of Hypoeutectic Boron Addition on the beta Transus of Ti-6Al-4V Alloy. In: Metallurgical and Materials Transactions A, 42A (9). pp. 2535-2541.
Gurao, Nilesh P and Kapoor, Rajeev and Suwas, Satyam (2010) Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2794-2804.
Sen, Indrani and Ramamurty, Upadrasta (2010) High-Temperature (1023 K to 1273 K 750 degrees C to 1000 degrees C]) Plastic Deformation Behavior of B-Modified Ti-6Al-4V Alloys: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2959-2969.
Balam, Somasurendra Kumar and Paul, Aloke (2010) Interdiffusion Study in the Fe-Nb System. In: Metallurgical and Materials Transactions A, 41A (9). pp. 2175-2179.
Bhowmik, Ayan and Biswas, Somjeet and Suwas, Satyam and Ray, RK and Bhattacharjee, D (2009) Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion. In: Metallurgical and Materials Transactions A, 40A (11). pp. 2729-2742.
Prasad, S and Paul, A (2009) Diffusion Parameters in the Nb-Mo System: Revisited. In: Metallurgical and Materials Transactions A, 40A (7). pp. 1512-1514.
Sudarshan, M and Surappa, MK and Ahn, Dongjoon and Raj, Rishi (2008) Nanoceramic-Metal Matrix Composites by In-Situ Pyrolysis of Organic Precursors in a Liquid Melt. In: Metallurgical and Materials Transactions A, 39A (13). pp. 3291-3297.
Gopinath, K and Gogia, AK and Kamat, SV and Balamuralikrishnan, R and Ramamurty, U (2008) Tensile Properties of Ni-Based Superalloy 720Li: Temperature and Strain Rate Effects. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2340-2350.
Sarkar, S and Gupta, GS (2008) Two-Dimensional Mathematical Modeling of the Pack Carburizing Process. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2424-2434.
Ranganathan, Srinivasa (2008) Materials Behavior: Far from Equilibrium. In: Metallurgical and Materials Transactions A, 39A (7). p. 1479.
Kolluri, M and Karthikeyan, S and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: I. Experiments. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2006-2013.
Karthikeyan, S and Kolluri, M and Ramamurty, U (2007) Effect of Lateral Constraint on the Mechanical Properties of a Closed-Cell Al Foam: Part II. Strain-Hardening Models. In: Metallurgical and Materials Transactions A, 38 (9). pp. 2014-2023.
Kottada, RS and Chokshi, AH (2007) Grain boundary sliding during diffusion and dislocation creep in a Mg-0.7 pct Al alloy. In: Metallurgical and Materials Transactions A, 38A (8). pp. 1743-1749.
Satyam, Suwas and Roxane, Arruffat-Massion and Toth, Laszol S and Jean-Jacques, Fundenberger and Andre, Eberhardt and Werner, Skrotzki (2006) Evolution of Crystallographic Texture during Equal Channel Angular Extrusion of Copper: The Role of Material Variables. In: Metallurgical and Materials Transactions A, 37 (3). pp. 739-753.
Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part I. Line Compounds with Narrow Homogeneity Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.
Reddy, SNS and Leonard, DN and Wiggins, LB and Jacob, KT (2005) Internal Displacement Reactions in Multicomponent Oxides: Part II. Oxide Solid Solutions of Wide Composition Range. In: Metallurgical and Materials Transactions A, 36A (10). pp. 2695-2703.
Phanikumar, G and Manjini, S and Dutta, P and Mazumder, J and Chattopadhyay, K (2005) Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple. In: Metallurgical and Materials Transactions A, 36A (8). pp. 2137-2147.
Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.
Sankarasubramanian, R and Jog, CS and Abinandanan, TA (2002) Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity. In: Metallurgical and Materials Transactions A, 33 (4). pp. 1083-1090.
Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (2002) The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct). In: Metallurgical and Materials Transactions A, 33 (2). pp. 391-400.
Shankar, P and Palanichamy, P and Jayakumar, T and Raj, Baldev and Ranganathan, S (2001) Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in aged 316LN stainless steels. In: Metallurgical and Materials Transactions A, 32 (12). pp. 2959-2968.
Bag, Asim and Dwarakadasa, ES and Ray, KK (2001) Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels. In: Metallurgical and Materials Transactions A, 32 (9). pp. 2207-2217.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Laha, K and Chandravathi, KS and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Jacob, KT and Priya, S and Waseda, Y (2000) Measurement of the Activity of Boron in Liquid Copper using a Four-Phase Equilibrium Technique. In: Metallurgical and Materials Transactions A, 31 (10). pp. 2674-2678.
Hajra, JP and Divakar, M (1999) Thermodynamics of surfaces and adsorption in the Fe-S, Fe-N, and Fe-S-N systems at 1823 K. In: Metallurgical and Materials Transactions A, 30 (3). pp. 429-433.
Jacob, KT and Patil, Rashmi (1998) Activities in the spinel solid solution FeXMg1−XAl2O4. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1241-1248.
Bhargava, NRMR and Samajdar, I and Ranganathan, S and Surappa, MK (1998) Role of cold work and SiC reinforcements on the beta '/beta precipitation in Al-10 pct Mg alloy. In: Metallurgical and Materials Transactions A, 29 (11). pp. 2835-2842.
Srivastava, AK and Ojha, SN and Ranganathan, S (1998) Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy. In: Metallurgical and Materials Transactions A, 29 (08). pp. 2205-2219.
Jacob, KT and Priya, S and Waseda, Y (1998) Thermodynamic properties and phase equilibria for Pt-Rh alloys. In: Metallurgical and Materials Transactions A, 29 (6). pp. 1545-1550.
Varamban, Vana S and Jacob, KT (1998) Discussion of "Retrograde solubility in semiconductors. In: Metallurgical and Materials Transactions A, 29 (5). pp. 1525-1526.
Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part I. Dendrite morphology. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1319-1327.
Dutta, B and Surappa, MK (1998) Directional dendritic solidification of a composite slurry: Part II. Particle distribution. In: Metallurgical and Materials Transactions A, 29 (4). pp. 1329-1339.
Jayaganthan, R and Hajra, JP (1998) Thermodynamics and phase equilibria in the Al-In-Sb system. In: Metallurgical and Materials Transactions A, 29 (2). pp. 611-616.
Banerjee, S and Dey, GK and Srivastava, D and Ranganathan, S (1997) Plate-shaped transformation products in zirconium-base alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2201-2216.
Nagarajan, R and Aoki, K and Chattopadhyay, K (1997) Synthesis of nanodispersed phases during rapid solidification and crystallization of glasses in Ti75Ni25 alloys. In: Metallurgical and Materials Transactions A, 28 (11). pp. 2223-2232.
Chokshi, Atul H and Langdon, Terence G (1996) A Model Study of Cavity Growth in Superplasticity Using Single Premachined Holes. In: Metallurgical and Materials Transactions A, 27A (9). pp. 2532-2539.
Gupta, Dharmendra and Lahir, AK (1996) Cold model study of the surface profile in a continuous slab casting mold: Effect of second phase. In: Metallurgical and Materials Transactions A, 27 (4). pp. 695-697.
Anthonysamy, S and Ananthasivan, K and Kaliappan, I and Chandramouli, V and Rao, PRV and Mathews, CK and Jacob, KT (1996) Gibbs energies of formation of chromium carbides. In: Metallurgical and Materials Transactions A, 27 (7). pp. 1919-1924.
Majumdar, B and Chattopadhyay, K (1996) The rayleigh instability and the origin of rows of droplets in the monotectic microstructure of zinc-bismuth alloys. In: Metallurgical and Materials Transactions A, 27 (7). pp. 2053-2057.
Ravi, M and Pillai, UTS and Pai, BC and Damodaran, AD and Dwarakadasa, ES (1996) A study of the influence of mischmetal additions to Al-7Si-0.3Mg (LM 25/356) alloy. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1283-1292.
Hajra, JP and Divakar, M (1996) Applicability of Butler's equation in interpreting the thermodynamic behavior of surfaces and adsorption in Fe-S-O melts. In: Metallurgical and Materials Transactions A, 27 (2). pp. 241-253.
Prasad, YVRK (1996) Dynamic materials model: Basis and principles - Reply. In: Metallurgical and Materials Transactions A, 27 (1). pp. 235-236.
Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.
Meyers, Marc A and Andrade, Umberto R and Chokshi, Atul H (1995) The effect of grain size on the high-strain, high-strain-rate behavior of copper. In: Metallurgical and Materials Transactions A, 26 (11). pp. 2881-2893.
Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the System $NiO-CaO-SiO_2$ and Gibbs Energy of Formation of $CaNiSi_2O_6$. In: Metallurgical and Materials Transactions A, 26A (9). pp. 2311-2315.
Mukhopadhyay, Sukanya and Jacob, KT (1995) Phase equilibria in the system NiO-CaO-SiO2 and Gibbs energy of formation of CaNiSi2O6. In: Metallurgical and Materials Transactions A, 26 (9). pp. 2311-2315.
Bhaskaran, TA and Krishnan, RV and Ranganathan, S (1995) On the decomposition of ? phase in some rapidly quenched titanium-eutectoid alloys. In: Metallurgical and Materials Transactions A, 26 (6). 1367-1377 .
Pandit, SS and Jacob, KT (1995) Phase relations in the system MgO-SiO2-ZrO2 at 1700 K. In: Metallurgical and Materials Transactions A, 26 (2). pp. 397-399.
Pandit, SS and Jacob, KT (1995) Thermodynamic properties of magnesium phosphate (Mg3P2O8)�Correction of data in recent compilations. In: Metallurgical and Materials Transactions A, 26 (1). 225-227 .
Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). pp. 2275-2284.
Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). 2275 -2284 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .
Jacob, KT and Sriram, MV (1994) Phase relations and gibbs energies in the system Mn-Rh-O. In: Metallurgical and Materials Transactions A, 25 (7). pp. 1347-1357.
Gupta, Dharmendra and Lahiri, AK (1994) Water-modeling study of the surface disturbances in continuous slab caster. In: Metallurgical and Materials Transactions A, 25 (2). pp. 227-233.
Jacob, KT and Seetharaman, S (1994) Thermodynamic stability of metallurgical coke relative to graphite. In: Metallurgical and Materials Transactions A, 25 (1). 149-154 .
Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in $YBa_2Cu_3O_{7-\delta}$. In: Metallurgical and Materials Transactions A, 23 (12). pp. 3325-3335.
Mathews, Tom and Jacob, KT (1992) Variation of the partial thermodynamic properties of oxygen with composition in YBa2Cu3O7−δ. In: Metallurgical and Materials Transactions A, 23A (12). pp. 3325-3335.
Ravichandran, N and Prasad, YVRK (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. In: Metallurgical and Materials Transactions A, 22 (10). pp. 2339-2348.
Dhua, SK and Raju, S and Chattopadhyay, K (1991) The liquid immiscibility and associated monotectic reaction in Zn-ln system. In: Metallurgical and Materials Transactions A, 22 (1). pp. 1131-1136.
Hajra, JP (1989) Thermodynamic consistency of the ternary functions. In: Metallurgical and Materials Transactions A, 20 (10). pp. 2047-2055.
Ravichandran, KS and Rao, Venkata HC and Dwarakadasa, ES and Nair, Krishnadas CG (1987) Microstructural effects and crack closure during near-threshold fatigue crack propagation in a high-strength steel. In: Metallurgical and Materials Transactions A, 18 (6). pp. 865-876.
Jiran, E and Jacob, KT (1986) Computation of thermodynamic properties of multicomponent solutions: extension of Toop model. In: Metallurgical and Materials Transactions A, 17 (6). pp. 1102-1104.
Petric, A and Jacob, KT (1985) The Co Cr S ternary diagram at 1223 K and applications to corrosion. In: Metallurgical and Materials Transactions A, 16 (4). pp. 503-510.
Prasad, YVRK and Gegel, HL and Doraivelu, SM and Malas, JC and Morgan, JT and Lark, KA and Barker, DR (1984) Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242. In: Metallurgical and Materials Transactions A, 15 (10). pp. 1883-1892.
Venkataraman, M and Hajra, JP (1983) Thermodynamics of nickel-manganese alloys using oxide and fluoride electrolytes. In: Metallurgical and Materials Transactions A, 14 (10). pp. 2125-2130.
Rao, Bhogeswara D and Nelson, Howard G and Jacob, KT (1983) Corrosion of 310 stainless steel in H2 H2O-H2S gas mixtures; studies at constant temperature and fixed oxygen potential. In: Metallurgical and Materials Transactions A, 14 (1). pp. 295-305.
Rao, KP and Doraivelu, SM and Roshan, HM and Prasad, YVRK (1983) Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1671-1679.
Waseda, Y and Jacob, KT (1983) Electron charge transfer in liquid copper tin alloys. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1748-1750.
Banerjee, D and Krishnan, RV and Vasu, KI (1980) A reconsideration of phase relations in the Ti-Al-Mo and Ti-Al systems. In: Metallurgical and Materials Transactions A, 11 (7). pp. 1095-1105.
