Browse by Journal / Conference

Makireddi, D and Ghuge, VD and Behera, A (2021) Use of powder bath sintering for the fabrication of hard ceramic tools. In: Materials and Manufacturing Processes, 37 (2). pp. 160-168.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.

Jeyakumar, M and Kumar, S and Gupta, GS (2010) Microstructure and Properties of the Spray-Formed and Extruded 7075 Al Alloy. In: Materials and Manufacturing Processes, 25 (8). pp. 777-785.

Jeyakumar, M and Kumar, S and Gupta, GS (2009) The Influence of Processing Parameters on Characteristics of an Aluminum Alloy Spray Deposition. In: Materials and Manufacturing Processes, 24 (6). pp. 693-699.

Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Processes-Induced Structural Transformations and the Impact Properties of Cr-Mn Iron Systems. In: Materials and Manufacturing Processes, 23 (3). pp. 320-325.

Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.

Ranganatha, S and Kailas, Satish V and Støren, Sigurd and Srivatsan, TS (2008) Role of temperature on sliding response of aluminum on steel of a hot extrusion. In: Materials and Manufacturing Processes, 23 (1). pp. 29-36.

Ravi, R and Prasad, YVRK and Sarma, VVS (2007) An Artificial Neural Network (ANN) Model for Predicting Instability Regimes in Copper-Aluminum Alloys. In: Materials and Manufacturing Processes, 22 (7). 846 -850.

Ravi, R and Prasad, YVRK and Sarma, VVS and Raidu, RS (2006) Artificial neural network model for predicting stable and unstable regions in Cu-Zn alloys. In: Materials and Manufacturing Processes, 21 (8). pp. 756-760.

Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.

Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.

Gupta, GS and Hind, G (2004) An Object-Oriented Modeling Approach in Materials Processing: Case Study of the Acheson and Carburizing Processes. In: Materials and Manufacturing Processes, 19 (2). pp. 221-242.

Basavaraj, MG and Gupta, GS (2002) Measurement of axial dispersion coefficient in a packed bed using X-ray. In: Materials and Manufacturing Processes, 17 (5). pp. 683-692.

Chakraborty, Suman and Dutta, Pradip (2002) Numerical modeling of heat and mass transfer in laser surface alloying: Non-equilibrium solidification effects. In: Materials and Manufacturing Processes, 17 (4). 455-468 .

Hemambar, C and Rao, Srinivasa B and Jayaram, V (2001) Al-SiC electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration. In: Materials and Manufacturing Processes, 16 (6). pp. 779-788.

Muthukumarasamy, S and Guruprasad, A and Sudhakar, A and Seshan, S (1996) The Performance of Zinc Alloy Based Metal Matrix Composites Produced Through Squeeze Casting. In: Materials and Manufacturing Processes, 11 (3). pp. 351-366.

Seshan, S and Srivatsan, TS (1990) Casting Aluminium-Lithium Alloys in Open Atmosphere. In: Materials and Manufacturing Processes, 5 (1). 109 - 119.