![]() | Up a level |
Shankar, Shantha K and Raychaudhuri, AK (2005) Fabrication of nanowires of multicomponent oxides: Review of recent advances. In: Materials Science and Engineering, 25 (5-8). pp. 738-751.
Srivastava, D and Mukhopadhyay, P and Banerjee, S and Ranganathan, S (2000) Morphology and substructure of lath martensites in dilute Zr=Nb alloys. In: Materials Science and Engineering, 288 (01). pp. 101-110.
Pink, Erwin and Kumar, Subodh and Tian, Baohui (2000) Serrated flow of aluminium alloys influenced by precipitates. In: International-Union-of-Materials-Research-Societies International Conference on Advanced Materials (IUMRS-ICAM 99), JUN 13-18, 1999, Beijing, Peoples Republic China, pp. 17-24.
James, AR and Balaji, S and Krupanidhi, SB (1999) Impedance-fatigue correlated studies on SrBi2Ta2O9. In: Materials Science and Engineering, 64 (3). pp. 149-156.
Rao, CNR and Seshadri, Ram and Govindaraj, A and Sen, Rahul (1995) Fullerenes, nanotubes, onions and related carbon structures. In: Materials Science and Engineering, 15 (6). pp. 209-262.
Bai, Pramila BN and Shamasunder, HS and Biswas, SK (1988) Debris analysis in dry sliding wear of Al-Si alloys. In: Materials Science and Engineering, 104 . L11-L14.
Gopal, ESR and Baranidharan, S and Sekhar, JA (1988) High pressure induced crystallization of rapidly solidified Al---Fe and Al---Mn quasi-crystalline alloysstar. In: Materials Science and Engineering, 99 (1-2). pp. 413-416.
Bhaskaran, TA and Seshadri, R and Krishnan, RV and Ranganathan, S (1988) Microstructural study of rapidly solidified titanium eutectoid alloysstar, open. In: Materials Science and Engineering, 98 . pp. 251-255.
Raviprasad, K and Chattopadhyay, K (1988) The effect of rapid solidification on the order-disorder transformation in iron-based alloys. In: Materials Science and Engineering, 98 . pp. 281-284.
Kurny, ASW and Mallya, RM and Rao, M Mohan (1986) A study on the nature of the compound layer formed during the ion nitriding of En40B steel. In: Materials Science and Engineering, 78 (1). pp. 95-100.
Chattopadhyay, K and Ojha, SN and Rao, P. Ramachandra (1985) Phase transformations and metastable phase equilibria in Al-Ge alloy. In: Materials Science and Engineering, 73 (1-2). pp. 177-185.
Rohatgi, PK and Murali, N and Shetty, HR and Chandrashekhar, R (1976) Improved damping capacity and machinability of graphite particle-aluminum alloy composites. In: Materials Science and Engineering, 26 (1). pp. 115-122.
Rohatgi, PK and Brush, EJ and Jain, SM and Adams, Christopher M (1974) Dendritic structures produced on solidification of multicomponent aqueous solutions. In: Materials Science and Engineering, 13 (1). pp. 3-18.
Rohatgi, PK and Jain, SM and Adams, Christopher M (1974) Effect of magnetic and electrical fields on dendritic freezing of aqueous solutions of sodium chloride. In: Materials Science and Engineering, 15 (2-3). pp. 283-290.
Murty, KN and Vasu, KI (1971) A study of the slow reaction in Al-5 wt.% Ag alloy by resistivity measurements. In: Materials Science and Engineering, 7 (4). pp. 208-214.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys. In: Materials Science and Engineering, 6 (5). pp. 327-333.
Murty, KN and Vasu, KI (1970) Clustering Kinelics in Aluminium-Silver Alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.
Murty, KN and Vasu, KI (1970) Clustering kinetics in aluminium-silver alloys. In: Materials Science and Engineering, 5 (5). pp. 251-257.