|
 | Up a level |
Verma, Nisha and Jayaram, Vikram (2012) The influence of Zr layer thickness on contact deformation and fracture in a ZrN-Zr multilayer coating. In: Journal of Materials Science (full set), 47 (4). pp. 1621-1630.
Venkatachalam, P and Roy, Shibayan and Ravisankar, B and Paul, Thomas V and Vijayalakshmi, M and Suwas, Satyam (2011) Texture evolution in an Al-Cu alloy during equal channel angular pressing: the effect of starting microstructure. In: Journal of Materials Science (full set), 46 (20). pp. 6518-6527.
Ranjith, K and Swathi, SK and Kumar, Prajwal and Ramamurthy, Praveen C (2011) Pulsed laser deposition film of a donor-acceptor-donor polymer as possible active layer in devices. In: Journal of Materials Science (full set), 46 (7). pp. 2259-2266.
Balam, SSK and Paul, A (2011) Study of interdiffusion and growth of topologically closed packed phases in the Co-Nb system. In: Journal of Materials Science (full set), 46 (4). pp. 889-895.
Jena, H and Kutty, KVG and Kutty, TRN (2005) Studies on the ionic transport and structural investigations of La0.5Li0.5TiO3 perovskite synthesized by wet chemical methods and the effect of Ce, Zr substitution at Ti site. In: Journal of Materials Science (full set), 40 (18). pp. 4737-4748.
Iyer, RV and Sooryanarayana, K and Row, Guru TN and Vijayan, K (2003) Low temperature crystallographic data on Kevlar 49 fibres. In: Journal of Materials Science (full set), 38 (1). pp. 133-139.
Kulkarni, SM and Kishore, * (2002) Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites. In: Journal of Materials Science (full set), 37 (20). pp. 4321-4326.
Jacob, KT and Verman, R and Mallya, RM (2002) Nitride synthesis using ammonia and hydrazine - a thermodynamic panorama. In: Journal of Materials Science (full set), 37 (20). pp. 4465-4472.
Gupta, N and Woldesenbet, E and Kishore, * (2002) Compressive fracture features of syntactic foams-microscopic examination. In: Journal of Materials Science (full set), 37 (15). pp. 3199-3209.
Santhanam, S (2000) An elastic-viscoplastic constitutive model for the hot-forming of aluminum alloys. In: Journal of Materials Science (full set), 35 (14). 3647 -3654.
Prakasan, Kalakkath and Seshan, Sambasivam (1999) Microstructure and properties of squeeze cast Cu-carbon fibre metal matrix composite. In: Journal of Materials Science (full set), 34 (20). pp. 5045-5049.
Ramaswamy, Parvati and Seetharamu, S and Varma, KBR and Rao, KJ (1996) A simple method for the preparation of plasma-sprayable powders based on ZrO2. In: Journal of Materials Science (full set), 31 (23). pp. 6325-6332.
Chandran, Gopi R and Patil, KC and Chandrappa, GT (1996) Mullite-zirconia composites. In: Journal of Materials Science (full set), 31 (21). pp. 5773-5779.
Deevi, S and Deevi, SC and Verneker, VRP (1996) Reactivities of aluminium and aluminium-magnesium alloy powders in polymeric composites. In: Journal of Materials Science (full set), 31 (4). pp. 1043-1051.
Sarkar, J and Prasad, YVRK and Surappa, MK (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. In: Journal of Materials Science (full set), 30 (11). pp. 2843-2848.
Sinha, SK and Biswas, SK (1995) Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite. In: Journal of Materials Science (full set), 30 (9). pp. 2430-2437.
Ravikiran, A and Bai, Pramila BN (1995) Sliding wear of YTZP ceramic against steel: observations on ceramic transfer and wear transition. In: Journal of Materials Science (full set), 30 (8). pp. 1999-2007.
Goyal, A and Murty, BS and Ranganathan, S (1993) Crystallization studies on amorphous AI-Y-Ni and AI-Y-Cu alloys. In: Journal of Materials Science (full set), 28 (22). pp. 6091-6095.
Padmavardhani, D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys Part II Alpha-Beta nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5275-5279.
Padmavardhani , D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys. Part I - Alpha-nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5269-5274.
Ravindra, A and Dwarakadasa, ES and Srivatsan, TS and Ramanath, C and Iyengar, KVV (1993) Electron-beam weld microstructures and properties of aluminium-lithium alloy 8090. In: Journal of Materials Science (full set), 28 (12). pp. 3173-3182.
Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1993) Processing maps for hot-working of powder metallurgy 1100 Al-10 vol % SiC-particulate metal-matrix composite. In: Journal of Materials Science (full set), 28 (8). pp. 2141-2147.
Srinivasan, A and Gopal, ESR (1992) Thermally induced transformations in GexAsyTe100-x-y glasses. In: Journal of Materials Science (full set), 27 (15). pp. 4208-4210.
Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Microstructural changes induced by ternary additions in a hypo-eutectic titanium-silicon alloy. In: Journal of Materials Science (full set), 26 (10). pp. 2637-2644.
Zhang, DL and Chattopadhyay, K and Cantor, B (1991) Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix. In: Journal of Materials Science (full set), 26 (6). pp. 1531-1544.
Seshadri, Ram and Rao, Krishna RV and Mallya, RM and Krishnan, RV (1988) Electron-beam melting and centrifugal splat-quenching technique for rapid solidification of titanium alloys. In: Journal of Materials Science (full set), 23 (5). pp. 1637-1642.
Padma, R and Ramkumar, K and Satyam, M (1988) Growth of titanium oxide overlayers by thermal oxidation of titanium. In: Journal of Materials Science (full set), 23 (5). pp. 1591-1597.
Deevi, Seetharama C (1988) Effect of mechanical treatment on the reactivity of ammonium perchlorate. In: Journal of Materials Science (full set), 23 (1). 201 -207.
Bhat, HL (1981) Filamentary and dendritic growth of lead chloride crystals in silica gel. In: Journal of Materials Science (full set), 16 (6). pp. 1707-1710.
