Up a level |
Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2016) On the Low Temperature Densification of Reactively Hot Pressed Non-Stoichiometric ZrC and (Zr,Ti)C. In: Conference on Advances in Refractory and Reactive Metals and Alloys (ARRMA), JAN 27-29, 2016, Mumbai, INDIA, pp. 3077-3085.
Hijazi, Faizan and Kar, Jyotirmaya and Pavan, A H V and Singh, Kulvir and Kumar, Praveen and Jayaram, Vikram (2019) Application of bending creep for examining effect of service conditions on creep response of steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 766 .
Jalali, Syed Idrees Afzal and Kumar, Praveen and Jayaram, Vikram (2019) Creep of Metallic Materials in Bending. In: JOM, 71 (10). pp. 3565-3583.
Venkatraman, Kaustubh and Jayaram, Vikram (2019) Stiffness based technique to probe cyclic damage accumulation in micro-structurally graded bond coats viamicro-beam bending tests. In: PHILOSOPHICAL MAGAZINE, 99 (16). pp. 2016-2050.
Cadambi, Sumanth Govindarajan and Jayaram, Vikram (2018) Effect of Humidity on Wear of TiN Coatings: Role of Capillary Condensation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6084-6092.
Pal, Soupitak and Sarkar, Rohit and Jayaram, Vikram (2018) Characterization of Thermal Stability and High-Temperature Tribological Behavior of Electroless Ni-B Coating. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3217-3236.
Patel, Subodh Nath and Jayaram, Vikram and Banerjee, Dipankar (2017) Thick coatings of porous zirconia by anodization of zirconium in an organic electrolyte. In: SURFACE & COATINGS TECHNOLOGY, 323 . pp. 2-9.
Rangaraj, Lingappa and Chakrabarti, Tamoghna and Kannan, Rajaguru and Jayaram, Vikram (2016) Effect of applied pressure on densification of monolithic ZrCx ceramic by reactive hot pressing. In: JOURNAL OF MATERIALS RESEARCH, 31 (4). pp. 506-515.
Jaya, Nagamani and Jayaram, Vikram (2016) Fracture Testing at Small-Length Scales: From Plasticity in Si to Brittleness in Pt. In: JOM, 68 (1). pp. 94-108.
Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2015) Computational modeling of reactive hot pressing of zirconium carbide. In: JOURNAL OF MATERIALS RESEARCH, 30 (12). pp. 1876-1886.
Jaya, Balila Nagamani and Bhowmick, Sanjit and Asif, Syed SA and Jayaram, Vikram (2015) In-situ study of microscale fracture of diffusion aluminide bond coats: Effect of platinum. In: JOURNAL OF MATERIALS RESEARCH, 30 (21). pp. 3343-3353.
Jaya, Nagamani B and Bhowmick, Sanjit and Asif, Syed SA and Warren, Oden L and Jayaram, Vikram (2015) Optimization of clamped beam geometry for fracture toughness testing of micron-scale samples. In: PHILOSOPHICAL MAGAZINE, 95 (16-18). pp. 1945-1966.
Jaya, Nagamani B and Jayaram, Vikram (2014) Crack stability in edge-notched clamped beam specimens: modeling and experiments. In: INTERNATIONAL JOURNAL OF FRACTURE, 188 (2). pp. 213-228.
Chakrabarti, Tamoghna and Rangaraj, Lingappa and Jayaram, Vikram (2014) Effect of Zirconium on the Densification of Reactively Hot-Pressed Zirconium Carbide. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97 (10). pp. 3092-3102.
Verma, Nisha and Jayaram, Vikram (2014) Role of interface curvature on stress distribution under indentation for ZrN/Zr multilayer coating. In: THIN SOLID FILMS, 571 (2). pp. 283-289.
Praveena, Manimunda and Guha, Kaustav and Ravishankar, Abhilash and Biswas, Sanjay K and Bain, Colin D and Jayaram, Vikram (2014) Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. In: RSC ADVANCES, 4 (42). pp. 22205-22213.
Patel, Manish and Prasad, Bhanu VV and Jayaram, Vikram (2013) Heat conduction mechanisms in hot pressed ZrB2 and ZrB2-SiC composites. In: Journal of the European Ceramic Society, 33 (10). pp. 1615-1624.
Rangaraj, Lingappa and Barman, Kanika and Divakar, Canchi and Jayaram, Vikram (2013) Reactive hot pressing of Ti-B-C and Ti-C at 1200 degrees C. In: Ceramics International, 39 (5). pp. 5955-5961.
Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.
Patel, Manish and Singh, V and Reddy, JJ and Prasad, Bhanu VV and Jayaram, Vikram (2013) Densification mechanisms during hot pressing of ZrB2-20 vol.% SiC composite. In: SCRIPTA MATERIALIA, 69 (5). pp. 370-373.
Verma, Nisha and Jayaram, Vikram (2013) Detailed investigation of contact deformation in ZrN/Zr multiplayer-understanding the role of volume fraction, bilayer spacing, and morphology of interfaces. In: JOURNAL OF MATERIALS RESEARCH, 28 (22). pp. 3146-3156.
Praveena, Manimunda and Bain, Colin D and Jayaram, Vikram and Biswas, Sanjay K (2013) Total internal reflection (TIR) Raman tribometer: a new tool for in situ study of friction-induced material transfer. In: RSC ADVANCES, 3 (16). pp. 5401-5411.
Verma, Nisha and Cadambi, Sumanth and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Micromechanisms of damage nucleation during contact deformation of columnar multilayer nitride coatings. In: ACTA MATERIALIA, 60 (6-7). pp. 3063-3073.
Praveena, Manimunda and Jayaram, Vikram and Biswas, Sanjay K (2012) Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C. In: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 51 (38). pp. 12321-12328.
Patel, Manish and Reddy, Janardhan J and Prasad, Bhanu VV and Jayaram, Vikram (2012) Strength of hot pressed ZrB2-SiC composite after exposure to high temperatures (1000-1700 degrees C). In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 32 (16). pp. 4455-4467.
Kumar, Dinesh and Gurav, Sampada and Jayaram, Vikram and Biswas, Sanjay Kumar (2012) Synthesis and characterization of nickel/barium hexa-aluminate composite coatings. In: BULLETIN OF MATERIALS SCIENCE, 35 (6). pp. 977-988.