Process-Controlled Domain Switching and Improved Ferroelectric Properties in Lanthanum-Modified Lead Zirconate Titanate Films

Balaraman, AA and Jeyaseelan, AA and Dutta, S (2023) Process-Controlled Domain Switching and Improved Ferroelectric Properties in Lanthanum-Modified Lead Zirconate Titanate Films. In: Journal of Materials Engineering and Performance .

PDF jou_mat_eng_2023.pdf - Published Version Restricted to Registered users only Download (4MB) | Request a copy

Abstract

In the present study, the effect of processing parameters like annealing temperature, excess of lead (Pb) content, and film thickness on the crystallographic orientation, dielectric and ferroelectric properties of PLZT (Pb/La/Zr/Ti: 92/8/52/48) films are investigated. For the investigation, PLZT films were prepared on Pt/Ti/SiO2/Si substrate by chemical solution deposition method and annealed at different temperatures (600, 625, 650, 675, and 700 °C). Diverse growth orientation was observed for different annealing temperatures that gave rise to modified electrical properties in the PLZT films. Comparative studies on processing temperature exhibited improved ferroelectric properties in 650 °C annealed PLZT film, which is attributed to its crystallinity (Full width at half maximum, FWHM101 = 0.49°) and texture coefficient (γ = 0.832). Excess Pb content (3 wt.%) yielded improved ferroelectric properties in PLZT film with a ~ 10% increment in domain switching. The PLZT film with 3 wt.% Pb-excess content showed an ASTM class 5B adhesion on Pt/Ti/SiO2/Si substrate, a nano-hardness value of 7894.43 MPa, and a Young’s modulus value of 143.05 GPa. To further study the effect of process control parameters on PLZT film, variation of thicknesses (492, 768, and 1500 nm) was studied for 3 wt.% Pb-excess film. The study showed considerable domain switching (switching current = 58.10 μA at 40 kV/cm), improved dielectric constant (~ 2750), higher polarization (Pmax = 71.4 μC/cm2) at a low electric field 334 kV/cm and low leakage current for 1500 nm thick PLZT film. A total energy storage density of ~ 26 J/cm3 at 1020 kV/cm and tunability of 68.46% at ~ 200 kV/cm was achieved for PLZT film with 3 wt.% excess Pb.

Item Type:	Journal Article
Publication:	Journal of Materials Engineering and Performance
Publisher:	Springer
Additional Information:	The copyright for this article belongs to Springer.
Keywords:	Annealing; Crystallinity; Electric fields; Ferroelectric films; Ferroelectricity; Lanthanum compounds; Lead zirconate titanate; Leakage currents; Silicon; Textures, Annealing temperatures; Domain switchings; Energy; Ferroelectric property; Inorganics; Lanthanum-modified lead zirconate titanate; Lead-zirconate-titanate films; Pb/la/zr/ti: 92/8/52/48 film; Processing parameters; Si substrates, Process control
Department/Centre:	Division of Interdisciplinary Sciences > Centre for Nano Science and Engineering
Date Deposited:	19 May 2023 09:44
Last Modified:	19 May 2023 09:44
URI:	https://eprints.iisc.ac.in/id/eprint/81566

Actions (login required)

View Item