Kondalraj, R and Appa Rao, G (2022) Efficiency of Strut-and-Tie Model for Design of Reinforced Concrete Deep Beams without Web Reinforcement. In: ACI Structural Journal, 119 (3). pp. 233-247.
Full text not available from this repository. (Request a copy)Abstract
The efficiency of ACI 318 and AASHTO strut-and-tie models for designing the reinforced concrete deep beams without web reinforcement is discussed. A database of 232 tests on reinforced concrete (RC) deep beams without web reinforcement was chosen for the investigation. Based on a review of the experimental database, the depth of flexural compression derived using linear elastic analysis appears to be an acceptable approximation for deep beams. Compared to AASHTO and ACI 318-19, ACI 318-14 suggests a higher strut efficiency factor of 0.51 for struts without web reinforcement. When the shear strength limit of ACI 318-14 is considered, the shear strength is estimated with a mean strength ratio of 0.69 and a 4 overestimation. To reduce the overprediction, ACI 318-19 reduces the strut efficiency factor to 0.34 from 0.51, which also decreases the mean strength ratio to 0.51 and eliminates the overprediction of capacity. AASHTO�s strut efficiency of 0.45 exhibits a 5 strut efficiency factor estimated from the database. Analysis of the experimental database reveals that the strut efficiency factor decreases with an increase in concrete strength. The lowest strut efficiency by ACI 318-19 may result in an unsafe estimation for high concrete strength. As a result, the strut efficiency factor as a linear function of concrete strength has been presented, which predicts a deep beam capacity with high accuracy�less than 3 overestimation. This study also examines the factors affecting the diagonal cracking load. The beam depth affects the diagonal cracking load, which was ignored in AASHTO. The improved AASHTO formula, accounting for the size effect, predicts diagonal cracking load with the same accuracy as AASHTO�s original expression while reducing overestimation to 5 from 13. © 2022 American Concrete Institute. All rights reserved.
Item Type: | Journal Article |
---|---|
Publication: | ACI Structural Journal |
Publisher: | American Concrete Institute |
Additional Information: | The copyright for this article belongs to the American Concrete Institute. |
Keywords: | Concrete beams and girders; Database systems; Reinforced concrete, Concrete strength; Cracking load; Deep beam; Diagonal cracking load; Efficiency factor; Experimental database; Reinforced concrete deep beams; Strut efficiency; Strut-and-tie model; Web reinforcement, Efficiency |
Department/Centre: | Division of Mechanical Sciences > Civil Engineering |
Date Deposited: | 16 Oct 2023 12:07 |
Last Modified: | 16 Oct 2023 12:07 |
URI: | https://eprints.iisc.ac.in/id/eprint/76719 |
Actions (login required)
View Item |