Effect of process induced variations on machining characteristics of a model epoxy resin system

Grama, SN and Nagaraja, AM and Gururaja, S and Mohan, RV (2018) Effect of process induced variations on machining characteristics of a model epoxy resin system. In: Machining Science and Technology, 22 (5). pp. 811-828.

PDF mac_sci_tec_22-5_811-828_2018.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy

Abstract

The present work aims to understand the effect of process induced variation on mechanisms of failure, deformation and damage mechanisms in a model epoxy resin system during machining. Process variations have been introduced for a 5052 Huntsman epoxy resin system by considering three post-cure temperature and cycles, viz., 50°C for 15 h, 80°C for 8 h and 100°C for 4 h. Detailed orthogonal cutting experiments have been carried out at different cutting speeds, rake angles and uncut chip thicknesses. Studies of chip formation characteristics, cutting force signatures and fractography indicate a significant brittle-like behavior with increasing post-cure temperature resulting in discontinuous chips that became more pronounced for a positive rake angle. Concurrently, extensive mechanical characterization under different strain rates and temperatures has been carried out using dynamic mechanical analyzer for the epoxy specimens. In addition, standard tensile tests have also been conducted that indicate a correlation between mechanical properties and post-cure temperature cycles. Results are indicative of a strong correlation between post-cure variations and associated failure, fracture characteristics during machining that can be used as a tool for assessing the in-situ cure characteristics in a composite structure.

Item Type:	Journal Article
Publication:	Machining Science and Technology
Publisher:	Taylor and Francis Inc.
Additional Information:	The copyright for this article belongs to the Taylor and Francis Inc.
Keywords:	Curing; Cutting; Fracture; Fracture mechanics; Strain rate; Tensile testing, Dynamic mechanical analyzer; Epoxy; Fracture characteristics; Machining characteristics; Mechanical characterizations; Orthogonal machining; Post-cure; Process-induced variation, Epoxy resins
Department/Centre:	Division of Mechanical Sciences > Aerospace Engineering(Formerly Aeronautical Engineering)
Date Deposited:	05 Aug 2022 10:56
Last Modified:	05 Aug 2022 10:56
URI:	https://eprints.iisc.ac.in/id/eprint/75386

Actions (login required)

View Item