|
 | Up a level |
Nadig, DS and Ramakrishnan, V and Sampathkumaran, P and Prashanth, CS (2012) Effect of cryogenic treatment on thermal conductivity properties of copper. In: A1DVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference - ICMC, , 13–17 June 2011, Spokane, Washington, USA, pp. 133-139.
Sagar, KG and Suresh, PM and Sampathkumaran, P and Kishore, K (2023) Tribological studies on aluminum beryl composites subjected to ECAP process. In: Wear, 523 .
Pramod, T and Sampathkumaran, P and Puneeth, N and Sailaja, RRN and Seetharamu, S and Swamy, AS and Kishore, Kishore (2021) Tribological response of polycarbonate and acrylonitrile butadiene styrene blends containing fixed amounts of Kevlar fibre and molybdenum disulphide with varying quantities of betel nut powder. In: Polymers and Polymer Composites .
Sampathkumaran, P and Kishore, * and Seetharamu, S and Pattanashetti, VV and Kumar, Shekhar M and Niranjan, HB (2015) Fly ash cenospheres as reinforcement in different polymer composites - a comparative study of physical and mechanical properties. In: INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 22 (3). pp. 354-362.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2011) Chromium-manganese iron alloy system design cast in metal and sand moulds for erosion resistance: a positron lifetime study. In: International Journal of Advanced Manufacturing Technology, 52 (1-4). pp. 45-52.
Sen, Geetha and Sampathkumaran, P and Nadig, DS and Manjunatha, R and Seetharamu, S (2009) Effect of residual stresses and metallographic stability on the over all performance of integral diaphragm material. In: Materials Science and Engineering A, 517 (1-2). pp. 85-90.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2009) The effects of manganese content and mould size on abrasion and slurry erosion behaviour of chromium-manganese iron systems investigated by positron lifetime spectroscopy. In: Wear, 267 (9-10). pp. 1558-1565.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Effect of increased manganese addition and mould type on the slurry erosion characteristics of Cr-Mn iron systems. In: Bulletin of Materials Science, 31 (7). pp. 1001-1006.
Sampathkumaran, P and Ranganathaiah, C and Seetharamu, S and Kishore, * (2008) Processes-Induced Structural Transformations and the Impact Properties of Cr-Mn Iron Systems. In: Materials and Manufacturing Processes, 23 (3). pp. 320-325.
Kishore, * and Sampathkumaran, P and Seetharamu, S (2005) Erosion and abrasion characteristics of high manganese chromium irons. In: Wear, 259 (1-6). pp. 70-77.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Thomas, P and Janardhana, M (2005) A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and slide wear characteristics. In: Wear, 259 (1-6). pp. 634-641.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (2001) On the SEM features of glass–epoxy composite system subjected to dry sliding wear. In: Wear, 247 (2). pp. 208-213.
Sudhakar, KV and Sampathkumaran, P and Dwarakadasa, ES (2000) Dry sliding wear in high density Fe-2%Ni based P/M alloys. In: Wear, 242 (1-2). pp. 207-212.
Kishore, * and Sampathkumaran, P and Seetharamu, S and Vynatheya, S and Murali, A and Kumar, RK (2000) SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. In: Wear, 237 (1). pp. 20-27.
Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (1999) Dry Sliding Wear Behavior of Glass-Epoxy Composite. In: Journal of Reinforced Plastics and Composites, 18 (1). pp. 55-62.
Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK and Kishore, * (1998) Sliding wear studies in glass-epoxy system through scanning microscopic observations. In: Bulletin of Materials Science, 21 (4). pp. 335-339.
