Up a level |
Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.
Kumar, Shishir and Venkatesh, KP and Baskar, Sam S and Madhavi, SP (2009) System integration design in MEMS - A case study of micromachined load cell. In: Sadhana, 34 (4). pp. 663-675.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Axisymmetric fretting analysis in coated cylinder. In: Sadhana, 33 (3). pp. 299-327.
Anantheshwara, K and Murali, NS and Bobji, MS (2008) Effect of friction on the performance of inertial slider. In: Sadhana, 33 (3). pp. 221-226.
Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Micro and macro contact mechanics for interacting asperities. In: Sadhana, 33 (3). pp. 329-338.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Near surface stress analysis strategies for axisymmetric fretting. In: Sadhana, 33 (3). pp. 273-297.
Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Wave propagation in coated cylinders with reference to fretting fatigue. In: Sadhana, 33 (3). pp. 339-356.
Garg, Dinesh and Narahari, Y and Gujar, Sujit (2008) Foundations of mechanism design: A tutorial Part 1 - Key concepts and classical results. In: Sadhana, 33 (2). pp. 83-130.
Kumar, Anurag and Manjunath, D (2007) A tutorial survey of topics in wireless networking: Part I. In: Sadhana, 32 (6). pp. 619-643.
Kumar, Anurag and Manjunath, D (2007) A tutorial survey of topics in wireless networking: Part II. In: Sadhana, 32 (6). pp. 645-681.
Mathirajan, M and Chandru, V and Sivakumar, AI (2007) Heuristic algorithms for scheduling heat-treatment furnaces of steel casting industries. In: Sadhana, 32 (5). pp. 479-500.
Abani, N and Bakshi, S and Ravikrishna, RV (2007) Multi-dimensional modelling of spray, in-cylinder air motion and fuel–air mixing in a direct-injection engine. In: Sadhana, 32 (5). pp. 597-617.
Gupta, Pawan Kumar and Kuri, Joy (2007) TCP with header checksum option for wireless links: An analytical approach towards performance evaluation. In: Sadhana, 32 (3). pp. 253-275.
Sahoo, Niranjan and Saravanan, S and Jagadeesh, G and Reddy, KPJ (2006) Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel. In: Sadhana, 31 (Part 5). pp. 557-581.
Iyer, Srikanth K and Manjunath, D (2006) Topological properties of random wireless networks. In: Sadhana, 31 (2). pp. 117-139.
Laxman, Srivatsan and Sastry, PS (2006) A survey of temporal data mining. In: Sadhana, 31 (2). pp. 173-198.
Dulluri, Sandeep and Raghavan, Srinivasa NR (2005) Allocation of advertising space by a web service provider using combinatorial auctions. In: Sadhana, 30 (2 & 3). pp. 213-230.
Rajaraman, V (2005) Building blocks of e-commerce. In: Sadhana, 30 (2 & 3). pp. 89-117.
Narahari, Y and Dayama, Pankaj (2005) Combinatorial auctions for electronic business. In: Sadhana, 30 (2 & 3). pp. 179-211.
Raghavan, Srinivasa NR (2005) Data mining in e-commerce: A survey. In: Sadhana, 30 (2 & 3). pp. 275-289.
Narahari, Y and Raju, CVL and Ravikumar, K and Shah, Sourabh (2005) Dynamic pricing models for electronic business. In: Sadhana, 30 (2 & 3). pp. 231-256.
Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.
Mujumdar, PP and Saxena, Pavan (2004) A stochastic dynamic programming model for stream water quality management. In: Sadhana, 29 (Part 5). pp. 477-497.
Rao, Arni SR Srinivasa and Kakehashi, Masayuki (2004) A combination of differential equations and convolution in understanding the spread of an epidemic. In: Sadhana, 29 (3). pp. 305-313.
Surappa, MK (2003) Aluminium Matrix Composites: Challenges and Opportunities. In: Sadhana, 28 (1-2). pp. 319-334.
Rao, Arun R and Shrinivasa, U (2002) Towards simulation of elasto-plastic deformation: An investigation. In: Sadhana, 27 . pp. 251-294.
Dhanya, D and Ramakrishnan, AG and Pati, Peeta Basa (2002) Script identification in printed bilingual documents. In: Sadhana, 27 (1). pp. 73-82.
Ashwin, TN and Sastry, PS (2002) A font and size-independent OCR system for printed Kannada documents using support vector machines. In: Sadhana, 27 (1). pp. 35-58.
Prasad, Hari KS and Kumar, Mohan MS and Sekhar, M (2001) Modelling flow through unsaturated zones: Sensitivity to unsaturated soil properties. In: Sadhana, 26 (6). pp. 517-528.
Rao, Mallikarjuna K and Shrinivasa, U (2001) A set of pathological tests to validate new finite elements. In: Sadhana, 26 (6). pp. 549-590.
Majeed, MA and Murthy, CRL (2001) A model with nonzero rise time for AE signals. In: Sadhana, 25 (5). pp. 465-474.
Phanikumar, G and Chattopadhyay, K (2001) Solidification microstructure development. In: Sadhana, 26 (1&2). pp. 25-34.
Kalaiselvi, S and Rajaraman, V (2000) A survey of checkpointing algorithms for parallel and distributed computers. In: Sadhana, 25 (5). pp. 489-510.
Gopalakrishnan, S and Devi, G (2000) Behaviour of Lagrangian triangular mixed fluid finite elements. In: Sadhana, 25 (1). pp. 21-35.
Devi, Susheela V and Murty, Narasimha M (2000) Stochastic search techniques for post-fault restoration of electrical distribution systems. In: Sadhana, 25 (1). pp. 45-56.
Sastry, PS and Thathachar, MAL (1999) Learning automata algorithms for pattern classification. In: Sadhana, 24 (4&5). pp. 261-292.
Bharath, B and Borkar, VS (1999) Stochastic approximation algorithms: Overview and recent trends. In: Sadhana, 24 (Part 4). pp. 425-452.
Simha, KRY and Mohapatra, SS (1998) Stress concentration around irregular holes using complex variable method. In: Sadhana, 23 (4). pp. 393-412.
Srinivasan, R and Munjal, ML (1998) A fully automatic 3-D analysis tool for expansion chamber mufflers. In: Sadhana, 23 (2). pp. 195-212.
Kumar, Anurag and Holtzman, Jack (1998) Comparative performance analysis of versions of TCP in a local network with a mobile radio link. In: Sadhana, 23 (1). pp. 113-129.
Hari, KVS and Ottersten, Bjorn (1998) Parameter estimation using a sensor array in a Ricean fading channel. In: Sadhana, 23 (1). pp. 5-15.
Chowdhury, Amit KR and Barman, Kaushik and Ramakrishnan, KR (1998) Region-of-interest reconstruction from noisy projections using fractal models and Wiener filtering. In: Sadhana, 23 (1). pp. 29-43.
Reddy, Maheswara K and Reddy, VU (1998) Spatial smoothing with uniform circular arrays. In: Sadhana, 23 (Pt.1). pp. 17-27.
Venkatesh, YV and Ramani, K and Nandini, R (1993) Wavelet array decomposition of images using a Hermite sieve. In: Sadhana, 18 (2). pp. 301-324.
Baliga, BN and Dasappa, S and Shrinivasa, U and Mukunda, HS (1993) Gasifier-based power generation: Technology and economics. In: Sadhana, 18 (1). pp. 57-75.
Srinivas, KR and Reddy, VU (1991) Sensitivity of TLS and minimum norm methods of BOA estimation to errors due to either Unite data or sensor gain and phase perturbations. In: Sadhana, 16 (3). pp. 195-212.
Borkar, VS (1990) Controlled Markov chains with constraints. In: Sadhana, 15 (4-5). pp. 405-413.
Narahari, Y and Viswanadham, N and Meenakshisundaram, CR and Rao, Hanumantha P (1990) Integrated analytical models for flexible manufacturing systems. In: Sadhana, 15 (4-5). pp. 331-342.
Narahari, Y and Viswanadham, N and Prasad, Krishna KR (1990) Markovian models for deadlock analysis in automated manufacturing systems. In: Sadhana, 15 (4-5). pp. 343-353.
Sharma, Vinod (1990) Stability of multiple access communication networks. In: Sadhana, 15 (4-5). pp. 365-380.
Ram, R and Viswanadham, N (1990) Stochastic analysis of versatile workcentres. In: Sadhana, 15 (4-4). pp. 301-317.
Thathachar, MAL (1990) Stochastic automata and learning systems. In: Sadhana, 15 (4-5). pp. 263-281.
Sastry, PS (1990) Stochastic networks for constraint satisfaction and optimization. In: Sadhana, 15 (4-5). pp. 251-262.
Kumar, Anurag (1990) Task allocation in multiserver systems - A survey of results. In: Sadhana, 15 (4-5). pp. 381-395.
Munjal, ML (1990) Advances in the acoustics of flow ducts and mufflers. In: Sadhana, 15 (2). pp. 57-72.
Lakshmi, Raj M (1989) Cellular automaton fluids - A review. In: Sadhana, 14 (3). pp. 133-172.
Dasappa, S and Shrinivasa, U and Baliga, BN and Mukunda, H (1989) Five-kilowatt wood gasifier technology: Evolution and field experience. In: Sadhana, 14 (3). pp. 187-212.
Biswas, NN (1989) Maximum compatible classes from compatibility matrices. In: Sadhana, 14 (3). pp. 213-218.
Narasimha, R and Dey, J (1989) Transition-zone models for 2-dimensional boundary layers: A review. In: Sadhana, 14 (2). pp. 93-120.
Rao, CNR (1988) High-temperature ceramic oxide superconductors. In: Sadhana, 13 (1-2). pp. 19-35.
Rao, KJ and Varma, KBR and Raju, AR (1988) Light element ceramics. In: Sadhana, 13 (1&2). pp. 73-95.
Murty, Krishna AV (1987) Theoretical modeling of laminated composite plates. In: Sadhana, 11 (3-4). pp. 357-365.
Biswas, NN and Srinivasa, SH (1987) Fault tolerance in multiprocessor systems. In: Sadhana, 11 (1-2). pp. 93-110.
Vedula, S (1985) Optimal irrigation planning in river basin development: The case of the Upper Cauvery river basin. In: Sadhana, 8 (2). pp. 223-252.
Shrinivasa, U and Mukunda, HS (1984) Wood gas generators for small power $(\sim 5hp)$ requirements. In: Sadhana, 7 (2). pp. 137-154.
Ramakrishna Rao, A and Vedula, S (1981) Liquid bubble manometer for low differential heads. In: Sadhana, 4 (1). pp. 87-94.
Venkatachala, BJ and Nath, G (1980) Mass transfer effects on the generalised vortex flow over a stationary surface with or without magnetic field. In: Sadhana, 3 (3). 211-223..
Venkatachala, BJ and Nath, G (1980) Nonsimilar laminar incompressible boundary layers with vectored mass transfer. In: Sadhana, 3 (2). pp. 129-142.
Raghavan, MR and Nagendra, HR (1979) A study on bullock carts. Part 1. Engineering analysis of the two-wheel bullock cart design. In: Sadhana, 2 (4). pp. 435-449.
Raghavan, MR and Rao, DL Prasanna (1979) A study on bullock carts. Part 2. Experimental study of forces in a bullock cart. In: Sadhana, 2 (4). pp. 451-471.