ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Browse by Journal / Conference

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 36.

Das, S and Roy, D (2021) A poroviscoelasticity model based on effective temperature for water and temperature driven phase transition in hydrogels. In: International Journal of Mechanical Sciences, 196 .

Dat, ND and Quan, TQ and Mahesh, V and Duc, ND (2020) Analytical solutions for nonlinear magneto-electro-elastic vibration of smart sandwich plate with carbon nanotube reinforced nanocomposite core in hygrothermal environment. In: International Journal of Mechanical Sciences, 186 .

Sunilkumar, N and Roy, D and Reid, SR (2012) Smooth DMS-FEM: A new approach to solving nearly incompressible nonlinear elasto-static problems. In: International Journal of Mechanical Sciences, 54 (1). pp. 136-155.

Deepak, BP and Ganguli, Ranjan and Gopalakrishnan, S (2012) Dynamics of rotating composite beams: A comparative study between CNT reinforced polymer composite beams and laminated composite beams using spectral finite elements. In: International Journal of Mechanical Sciences, 64 (1). pp. 110-126.

Chandrashekhar, M and Ganguli, Ranjan (2010) Nonlinear vibration analysis of composite laminated and sandwich plates with random material properties. In: International Journal of Mechanical Sciences, 52 (7). pp. 874-891.

Trikha, M and Mahapatra, Roy D and Gopalakrishnan, S and Pandiyan, R (2010) Structural stability of slender aerospace vehicles: Part I Mathematical modeling. In: International Journal of Mechanical Sciences, 52 (7). pp. 937-951.

Kubair, DV and Bhanu-Chandar, B (2008) Stress concentration factor due to a circular hole in functionally graded panels under uniaxial tension. In: International Journal of Mechanical Sciences, 50 (4). pp. 732-742.

Gunda, Jagadish Babu and Ganguli, Ranjan (2008) New rational interpolation functions for finite element analysis of rotating beams. In: International Journal of Mechanical Sciences, 50 (3). pp. 578-588.

Varma, Siva Prasad N and Narasimhan, R and Luo, Alan A and Sachdev, AK (2007) An analysis of localized necking in aluminium alloy tubes during hydroforming using a continuum damage model. In: International Journal of Mechanical Sciences, 49 (2). pp. 200-209.

Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.

Chakraborty, A and Gopalakrishnan, S and Reddy, JN (2003) A new beam finite element for the analysis of functionally graded materials. In: International Journal of Mechanical Sciences, 45 (3). pp. 519-539.

Jain, Rajeev and Ramachandra, K and Simha, KRY (1999) Rotating anisotropic disc of uniform strength. In: International Journal of Mechanical Sciences, 41 (6). 639-648 .

Narasimhan, R and Biswas, SK (1998) A finite element study of the indentation mechanics of an adhesively bonded layered solid. In: International Journal of Mechanical Sciences, 40 (4). pp. 357-370.

Singh, Ripudaman and Ramamurthy, TS (1996) Thermomechanical generalization of partial contact in pin joints. In: International Journal of Mechanical Sciences, 38 (10). pp. 1059-1072.

Kumar, Satish K and Dattaguru, B and Ramamurthy, TS (1996) Analysis of a cracked lug loaded by an interference fit pin. In: International Journal of Mechanical Sciences, 38 (8-9). pp. 967-979.

Thanapandi, P and Prasad, Rama (1995) Centrifugal pump transient characteristics and analysis using the method of characteristics. In: International Journal of Mechanical Sciences, 37 (1). pp. 77-89.

Singh, Ripudaman and Ramamurthy, TS (1993) Thermomechanical behaviour of pin joints subjected to sheet loads. In: International Journal of Mechanical Sciences, 35 (1). pp. 1-17.

Mangalgiri, PD and Ramamurthy, TS and Dattaguru, B and Rao, AK (1987) Elastic analysis of pin joints in plates under some combined pin and plate loads. In: International Journal of Mechanical Sciences, 29 (8). 577 -585.

Biswas, SK (1985) Monoblock cylinder internally pressurised under asymmetric end constraints Some aspects of design. In: International Journal of Mechanical Sciences, 27 (5). pp. 325-334.

Janardhana, MN and Biswas, SK (1979) Modes of deformation in aluminium rings subjected to static axial compression. In: International Journal of Mechanical Sciences, 21 (12). pp. 699-712.

Eshwar, VA (1978) Analysis of clearance fit pin joints. In: International Journal of Mechanical Sciences, 20 (78). pp. 477-484.

Desay, Prakash and Kulkarni, AB (1978) Effect of membrane action on the plastic collapse load of circular orthotropic slabs with fixed edges. In: International Journal of Mechanical Sciences, 20 (2). pp. 97-108.

Ramamurthy , TS and Rao, AK (1978) Shaping of adherends in bonded joints. In: International Journal of Mechanical Sciences, 20 (10). 721-727 .

Ranganatham, BV and Rao, KSS (1974) Limit analysis of annular slabs - reply. In: International Journal of Mechanical Sciences, 16 (10). pp. 769-770.

Ramu, S Anantha and Iyengar, K Janardhana (1974) Quasi-three-dimensional elastic stresses in rotating disks. In: International Journal of Mechanical Sciences, 16 (7). pp. 473-477.

Ramu, SA and Iyengar, KJ (1974) Quasi-three-dimensional elastic stresses in rotating disks. In: International Journal of Mechanical Sciences, 16 (7). pp. 473-477.

Prakash, Prem and Rao, KP (1974) Stresses around reinforced curvilinear holes in spherical shells. In: International Journal of Mechanical Sciences, 16 (10). pp. 707-726.

Nair, PS and Durvasula, S (1973) On quasi-degeneracies in plate vibration problems. In: International Journal of Mechanical Sciences, 15 (12). pp. 975-986.

Sreenath, AV and Venkatesh, S (1973) Analysis and computation of the oil film thickness between the piston ring and cylinder liner of an internal combustion engine. In: International Journal of Mechanical Sciences, 15 (8). pp. 605-611.

Verma, MK and Krishna Murty, AV (1973) Non-linear bending of beams of variable cross-section. In: International Journal of Mechanical Sciences, 15 (2). pp. 183-187.

Ranganatham, BV and Subba Rao, KS (1972) Limit analysis of annular slabs. In: International Journal of Mechanical Sciences, 14 (10). pp. 693-699.

Venkateswara Rao, G and Krishna Murty, AV (1972) A modification to the Rayleigh-Ritz method for obtaining lower bounds to eigenvalues. In: International Journal of Mechanical Sciences, 14 (4). pp. 273-274.

Chopra, I and Durvasula, S (1971) Natural frequencies and modes of tapered skew plates. In: International Journal of Mechanical Sciences, 13 (11). pp. 935-944.

Murthy, PN and Tulapurkara, EG (1968) Note: Creep behaviour of high density polyethylene. In: International Journal of Mechanical Sciences, 10 (1). pp. 57-59.

Iyengar, NGR (1966) Creep behaviour of nimonic and R.R. 59 alloys. In: International Journal of Mechanical Sciences, 8 (12). pp. 771-777.

Yogananda, CV (1966) Ring loading of a long, thin, circular cylindrical shell enclosing a soft, solid core: A recalculation by the love function method of elasticity. In: International Journal of Mechanical Sciences, 8 (12). pp. 751-757.

This list was generated on Sun Apr 18 01:10:59 2021 IST.