|
 | Up a level |
Nagaraj, BP and Pandiyan, R and Ghosal, Ashitava (2010) A constraint Jacobian based approach for static analysis of pantograph masts. In: Computers & Structures, 88 (1-2). pp. 95-104.
Gunda, Jagadish Babu and Gupta, RK and Ganguli, Ranjan (2009) Hybrid stiff-string-polynomial basis functions for vibration analysis of high speed rotating beams. In: Computers & Structures, 87 (3-4). pp. 254-265.
Omkar, SN and Mudigere, Dheevatsa and Naik, Narayana G and Gopalakrishnan, S (2008) Vector evaluated particle swarm optimization (VEPSO) for multi-objective design optimization of composite structures. In: Computers & Structures, 86 (1-2). pp. 1-14.
Palani, GS and Iyer, Nagesh R and Dattaguru, B (2006) A generalised technique for fracture analysis of cracked plates under combined tensile, bending and shear loads. In: Computers & Structures, 84 (29-30). pp. 2050-2064.
Majumder, L and Manohar, CS (2004) Nonlinear reduced models for beam damage detection using data on moving oscillator–beam interactions. In: Computers & Structures, 82 (2-3). pp. 301-314.
Rao, Rama Mohan A and Rao, Appa TVSR and Dattaguru, B (2003) A new parallel overlapped domain decomposition method for nonlinear dynamic finite element analysis. In: Computers & Structures, 81 (26-27). pp. 2441-2454.
Sarkar, Sunetra and Venkatraman, Kartik (2003) A numerical technique to predict periodic and quasi-periodic response of nonlinear dynamic systems. In: Computers & Structures, 81 (13). pp. 1383-1393.
Pandey, PC and Narasimhan, S (2001) Three-dimensional nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives. In: Computers & Structures, 79 (7). pp. 769-783.
Bakshi, P and Pandey, PC (2000) Semi-analytical sensitivity using hybrid finite elements. In: Computers & Structures, 77 (2). pp. 201-213.
Pandey, PC and Shankaragouda, H and Singh, Arbind Kr (1999) Nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives. In: Computers & Structures, 70 (4). 387-413 .
Chandrakanth, S and Pandey, PC (1998) Damage coupled elasto-plastic finite element analysis of a Timoshenko layered beam. In: Computers & Structures, 69 (3). pp. 411-420.
Kumar, KS and Dattaguru, B and Ramamurthy, TS and Raju, KN (1996) Elasto-plastic contact stress analysis of joints subjected to cyclic loading. In: Computers & Structures, 60 (6). pp. 1067-1077.
Chandrashekhara, K and Antony, Joseph S (1996) Interaction analysis of strip footing resting on a non-homogeneous elastic medium. In: Computers & Structures, 60 (1). pp. 79-86.
ayadevan, KR and Narasimhan, R (1995) Finite element simulation of wedge indentation. In: Computers & Structures, 57 (5). pp. 915-927.
Sriram, BR and Mruthyunjaya, TS (1995) Dynamics of Flexible-Link Mechanisms. In: Computers & Structures, 56 (6). pp. 1029-1037.
Rao, Srinivasa P and Rambabu, KV and Allam, MM (1995) Representation of Soil Support in Analysis of Open Plane Frames. In: Computers & Structures, 56 (6). pp. 917-925.
Sriram, BR and Mruthyunjaya, TS (1995) Synthesis of path generating flexible-link mechanisms. In: Computers & Structures, 56 (4). pp. 657-666.
Reddy, Jawahar K and Vijayakumar, K (1995) Lamination-dependent shear deformation models for bending of angle-ply laminated plates. In: Computers & Structures, 56 (1). pp. 147-155.
Rajendran, S and Raghavan, MR and Narasimhan, MV (1995) Improving the convergence rate of the inverse iteration method. In: Computers & Structures, 55 (4). pp. 709-715.
Reddy, Jawahar K and Vijayakumar, K (1995) Lamination-dependent shear deformation models for cylindrical bending of angle-ply laminates. In: Computers & Structures, 55 (4). pp. 717-725.
Sundarraj, N and Dattaguru, D and Ramamurthy, TS (1995) Analysis of a Double Shear Lap Joint with Interference Fit Pin. In: Computers & Structures, 55 (2). pp. 357-363.
Sridhar, C and Rao, KP (1995) Estimation of low-velocity impact damage in laminated composite circular plates using nonlinear finite element analysis. In: Computers & Structures, 54 (6). pp. 1183-1189.
Venkatesh, DN and Shrinivasa, U (1995) Generation of an eight node brick element using Papcovitch-Neuber functions. In: Computers & Structures, 54 (6). pp. 1077-1084.
Ramu, SA and Ganesan, R (1995) Response And Stability Of A Stochastic Beam-Column Using Stochastic Fem. In: Computers & Structures, 54 (2). pp. 207-221.
Sridhar, C and Rao, KP (1995) Large deformation finite element analysis of laminated circular composite plates. In: Computers & Structures, 54 (1). pp. 59-64.
Srivatsa, KS and Vidyashankar, BR and Murty, Krishna AV and Vijaykumar, K (1993) Buckling of laminated plates containing delaminations. In: Computers & Structures, 48 (5). 907-912 .
Chandrashekhara, K and Antony, Joseph S (1993) Theoretical and experimental investigation of framed structure-layered soil interaction problems. In: Computers & Structures, 48 (2). pp. 263-271.
Singh, Ripudaman and Ramamurthy, TS (1993) Thermomechanical generalization of pin joints in finite plates. In: Computers & Structures, 47 (1). pp. 73-81.
Prasad, Renuka HN and Channakeshava, C and Prasad, Raghu BK and Iyengar, Sundara Raja KT (1993) Nonlinear finite element analysis of reinforced concrete corbel. In: Computers & Structures, 46 (2). pp. 343-354.
Chandrasekharappa, G (1992) Nonlinear static and dynamic damped response of a composite rectangular plate resting on a two-parameter elastic foundation. In: Computers & Structures, 44 (3). pp. 609-618.
Rao, Visweswara G (1992) Linear dynamics and active control of an elastically supported travelling string. In: Computers & Structures, 43 (6). pp. 1041-1049.
Sankar, TS and Ramu, Anantha S and Ganesan, R (1992) Variability of sif and cod of stochastic structural systems. In: Computers & Structures, 43 (6). 1135 -1145.
Srivatsa, KS and Murty, Krishna AV (1992) Stability of laminated composite plates with cut-outs. In: Computers & Structures, 43 (2). pp. 273-279.
Tripathy, B and Rao, KP (1992) Stiffened composite cylindrical panels�Optimum lay-up for buckling by ranking. In: Computers & Structures, 42 (4). pp. 481-488.
Shah, CG and Murty, Krishna AV (1991) Analysis of edge delaminations in laminates through combined use of quasi-three-dimensional, eight-noded, two-noded and transition elements. In: Computers & Structures, 39 (3-4). pp. 231-242.
Rao, KP and Tripathy, Biswajit (1991) Composite cylindrical panels-optimum lay-up for buckling by ranking. In: Computers & Structures, 38 (2). pp. 217-225.
Tripathy, B and Rao, KP (1991) Curved composite beams—optimum lay-up for buckling by ranking. In: Computers & Structures, 41 (1). pp. 75-82.
Ramu, Anantha S and Ganesan, R (1991) Free vibration of a stochastic beam-column using stochastic fem. In: Computers & Structures, 41 (5). 987-994 .
Patnaik, SN and Satish, HG (1990) Analysis of continuum using boundary compatibility conditions of integrated force method. In: Computers & Structures, 34 (2). pp. 287-295.
Venuraju, MT and Ramu, Anantha S (1990) Influence of an additional discrete elastic support on the stability of a Leipholz column. In: Computers & Structures, 36 (4). pp. 769-775.
Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1990) An improved iterative finite element solution for pin joints. In: Computers & Structures, 36 (6). pp. 1121-1128.
Rao, Sambasiva M and Nair, PS and Durvasula, S (1988) Use of modal energy distribution in the design of honeycomb sandwich decks. In: Computers & Structures, 26 (6). 737 -743.
Natarajan, G and Subramanian, G and Varadan, TK (1987) Convenient construction of tetrahedral finite elements for the quasi-harmonic equation. In: Computers & Structures, 25 (2). pp. 303-306.
Dattaguru, B and Naidu, ACB and Krishnamurthy, T and Ramamurthy, TS (1986) Development of special fastener elements. In: Computers & Structures, 24 (1). 127 -134.
Venkatesh, A and Murthy, Ramana PV and Rao, KP (1986) Finite element analysis of bimodulus composite stiffened thin shells of revolution. In: Computers & Structures, 22 (1). pp. 13-24.
Venkatesh, A and Rao, KP (1985) Analysis of laminated shells of revolution with laminated stiffeners using a doubly curved quadrilateral finite element. In: Computers & Structures, 20 (4). pp. 669-682.
Ramana Murthy, PV and Rao, KP (1984) Finite element analysis of laminated anisotropic beams of bimodulus materials. In: Computers & Structures, 18 (5). pp. 779-787.
Venkatesh, A and Rao, KP (1982) A laminated anisotropic curved beam and shell stiffening finite element. In: Computers & Structures, 15 (2). pp. 197-201.
Venkatesh, A and Rao, KP (1980) A Doubly curved Quadrilateral finite-element for the analysis of laminated anisotropic thin shells of revoution. In: Computers & Structures, 12 (6). pp. 825-832.
Bonde, DH and Rao, KP (1980) Stresses around two equal circular elastic inclusions in a pressurised cylindrical shell. In: Computers & Structures, 11 (4). pp. 257-263.
Bonde, DH and Rao, KP (1979) Edge reinforced circular elastic inclusions in cylindrical shells. In: Computers & Structures, 10 (5). pp. 833-837.
Rao, AK (1978) Elastic analysis of pin joints. In: Computers & Structures, 9 (2). 125-144 .
Bonde, DH and Rao, KP (1978) Circular elastic inclusions in cylindrical shells. In: Computers & Structures, 8 (3-4). pp. 349-355.
