Browse by Journal / Conference

Kumar, AP and Méndez, JP and Burela, RG and Bisagni, C and Harursampath, D and Ponnusami, SA (2024) Non-linear buckling analysis of delaminated hat-stringer panels using variational asymptotic method. In: Composite Structures, 345 .

Pothnis, JR and Hajagolkar, AK and Anilchandra, AR and Das, R and Gururaja, S (2023) Open-hole fatigue testing of UD-GFRP composite laminates containing aligned CNTs using infrared thermography. In: Composite Structures, 324 .

Nakka, R and Phanendra Kumar, A and Harursampath, D and Ponnusami, SA (2023) Influence of fibre cross-section profile on the multi-physical properties of uni-directional composites. In: Composite Structures, 321 .

Pitchai, P and Harursampath, D and Guruprasad, PJ (2023) Stochastic analysis of a three phase composite using variational asymptotic based homogenization technique coupled with stochastic reduced order model. In: Composite Structures, 316 .

Vyavahare, S and Mahesh, V and Mahesh, V and Harursampath, D (2023) Additively manufactured meta-biomaterials: A state-of-the-art review. In: Composite Structures, 305 .

Rautela, Mahindra and Senthilnath, J and Monaco, Ernesto and Gopalakrishnan, S (2022) Delamination prediction in composite panels using unsupervised-feature learning methods with wavelet-enhanced guided wave representations. In: Composite Structures, 291 (115579). ISSN 02638223

Kulkarni, RB and Gopalakrishnan, S and Trikha, M (2022) Material property identification in composite structures using time domain spectral elements. In: Composite Structures, 292 .

Nakka, Rajesh and Harursampath, Dineshkumar and Pathan, Mehtab and Ponnusami, Sathiskumar A (2022) A computationally efficient approach for generating RVEs of various inclusion/fibre shapes. In: Composite Structures, 291 . ISSN 02638223

Sharma, H and Ganguli, R (2021) Optimization of a higher-order sandwich composite beam under uncertainties. In: Composite Structures, 269 .

Verma, KK and Viswarupachari, CH and Gaddikeri, KM and Ramesh, S and Kumar, S and Bose, S (2021) Unfolding the effects of tuft density on compression after impact properties in unidirectional carbon/epoxy composite laminates. In: Composite Structures, 258 .

Vinyas, M and Harursampath, D (2020) Nonlinear vibrations of magneto-electro-elastic doubly curved shells reinforced with carbon nanotubes. In: Composite Structures, 253 .

Ren, S and Mahesh, V and Meng, G and Zhou, L (2020) Static responses of magneto-electro-elastic structures in moisture field using stabilized node-based smoothed radial point interpolation method. In: Composite Structures, 252 .

Kumar, D and Gururaja, S (2020) Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs. cryogenic. In: Composite Structures, 247 .

Vinyas, M (2020) On frequency response of porous functionally graded magneto-electro-elastic circular and annular plates with different electro-magnetic conditions using HSDT. In: Composite Structures, 240 .

Munian, RK and Roy Mahapatra, D and Gopalakrishnan, S (2020) Ultrasonic guided wave scattering due to delamination in curved composite structures. In: Composite Structures, 239 .

Pollayi, Hemaraju and Harursampath, Dineshkumar and Yu, Wenbin (2013) Evaluation of strength of component-laminates in strip-based mechanisms. In: Composite Structures, 100 . pp. 1-16.

Kumar, Prasanna TJ and Narendar, S and Gopalakrishnan, S (2013) Thermal vibration analysis of monolayer graphene embedded in elastic medium based on nonlocal continuum mechanics. In: Composite Structures, 100 . pp. 332-342.

Narendar, S and Mahapatra, Roy D and Gopalakrishnan, S (2011) Ultrasonic wave characteristics of a monolayer graphene on silicon substrate. In: Composite Structures, 93 (8). pp. 1997-2009.

Naik, Narayana G and Gopalakrishnan, S and Ganguli, Ranjan (2008) Design optimization of composites using genetic algorithms and failure mechanism based failure criterion. In: Composite Structures, 83 (4). pp. 354-367.

Kathiravan, R and Ganguli, Ranjan (2007) Strength design of composite beam using gradient and particle swarm optimization. In: Composite Structures, 81 (4). pp. 471-479.

Hosur, Mahesh V and Jain, Kunal and Chowdhury, Farhan and Jeelani, Shaik and Bhat, MR and Murthy, CRL (2007) Low-velocity impact response of carbon/epoxy laminates subjected to cold–dry and cold–moist conditioning. In: Composite Structures, 79 (2). pp. 300-311.

Ghosh, DP and Gopalakrishnan, S (2007) A superconvergent finite element for composite beams with embedded magnetostrictive patches. In: Composite Structures, 79 (3). pp. 315-330.

Pawar, Prashant M and Ganguli, Ranjan (2007) On the effect of progressive damage on composite helicopter rotor system behavior. In: Composite Structures, 78 (3). pp. 410-423.

Mitra, Mira and Gopalakrishnan, S (2006) Wavelet based spectral finite element for analysis of coupled wave propagation in higher order composite beams. In: Composite Structures, 73 (3). pp. 263-277.

Agarwal, S and Chakraborty, A and Gopalakrishnan, S (2006) Large deformation analysis for anisotropic and inhomogeneous beams using exact linear static solutions. In: Composite Structures, 72 (1). pp. 91-104.

Naik, Narayana G and Murty, Krishna AV and Gopalakrishnan, S (2005) A failure mechanism based failure theory for laminated composites including the effect of shear stress. In: Composite Structures, 69 (2). pp. 219-227.

Murthy, MVVS and Mahapatra, Roy D and Badarinarayana, K and Gopalakrishnan, S (2005) A refined higher order finite element for asymmetric composite beams. In: Composite Structures, 67 (1). pp. 27-35.

Bar, HN and Bhat, MR and Murthy, CRL (2004) Identification of failure modes in GFRP using PVDF sensors: ANN approach. In: Composite Structures, 65 (2). pp. 231-237.

Bar, HN and Bhat, MR and Murthy, CRL (2004) Identification of failure modes in GFRP using PVDF sensors: ANN approach. In: Composite Structures, 65 (2). 231–237.

Bhat, Chandrashekhar and Bhat, MR and Murthy, CRL (2003) Acoustic emission characterization of failure modes in composites with ANN. In: Composite Structures, 61 (3). pp. 213-220.

Mahapatra, Roy D and Gopalakrishnan, S (2003) A spectral finite element model for analysis of axial–flexural–shear coupled wave propagation in laminated composite beams. In: Composite Structures, 59 (1). pp. 67-88.

Chakraborty, A and Mahapatra, Roy D and Gopalakrishnan, S (2002) Finite element analysis of free vibration and wave propagation in asymmetric composite beams with structural discontinuities. In: Composite Structures, 55 (1). pp. 23-36.

Naik, Narayana G and Murty, Krishna AV (1999) A failure mechanism-based approach for design of composite laminates. In: Composite Structures, 45 (1). pp. 71-80.

Vijaya, BV and Durvasula, S (1998) Supersonic flutter of composite skin panels of repeated-sublaminate layup. In: Composite Structures, 41 (02). pp. 121-135.

Ganapathy, S and Rao, KP (1997) Interlaminar stresses in laminated composite plates, cylindrical/spherical shell panels damaged by low-velocity impact. In: Composite Structures, 38 (1-4). pp. 157-168.

Chandrashekhara, K and Kumar, BS (1993) Static analysis of a thick laminated circular cylindrical shell subjected to axisymmetric load. In: Composite Structures, 23 (1). pp. 1-9.

Rao, KP and Gopalkrishna, HR (1992) Optimization of composite cylindrical panels for buckling by ranking. In: Composite Structures, 21 (3). pp. 131-140.

Baraia, A and Durvasula, S (1992) Vibration and buckling of hybrid laminated curved panels. In: Composite Structures, 21 (1). pp. 15-27.

Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1991) Stress and strength analysis of pin joints in laminated anisotropic plates. In: Composite Structures, 19 (4). pp. 299-312.

Murty, Krishna AV and Kumar, Hari HK (1989) Modelling of symmetric laminates under extension. In: Composite Structures, 11 (1). 15 -32.

Ramamurthy , TS (1989) Recent studies on the behaviour of interference fit pins in composite plates. In: Composite Structures, 13 (2). pp. 81-99.

Murty, Krishna AV (1987) Flexure of composite plates. In: Composite Structures, 7 (3). pp. 161-177.

Murty, Krishna AV and Vellaichamy, S (1987) On higher order shear deformation theory of laminated composite panels. In: Composite Structures, 8 (4). pp. 247-270.

Iyengar, NGR and Umaretiya, JR (1986) Deflection analysis of hybrid laminated composite plates. In: Composite Structures, 5 (1). pp. 15-32.

Kamal, K and Durvasula, S (1986) Macromechanical behaviour of composite laminates. In: Composite Structures, 5 (4). 309 -318.

Kamal, K and Durvasula, S (1986) Some studies on free vibration of composite laminates. In: Composite Structures, 5 (3). pp. 177-202.

Mangalgiri, PD and Dattaguru, B (1986) A large orthotropic plate with misfit pin under arbitrarily oriented biaxial loading. In: Composite Structures, 6 (4). 271 -281.

Naidu, ACB and Dattaguru, B and Mangalgiri, PD and Ramamurthy, TS (1985) Analysis of a finite composite plate with smooth rigid pin. In: Composite Structures, 4 (3). pp. 197-216.

Gupta, RK and Venkatesh, A and Rao, KP (1985) Finite element analysis of laminated anisotropic thin-walled open-section beams. In: Composite Structures, 3 (1). pp. 19-31.

Gupta, RK and Rao, KP (1985) Instability of laminated composite thin-walled open-section beams. In: Composite Structures, 4 (4). pp. 299-313.