Kesarwani, P and Ravikrishna, RV (2020) Spray characteristics of a rotary atomizer. In: 14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018, 22-26 July 2018, Chicago; United States.
![]() |
PDF
icl_int_con_liq_ato_spr_sys_2020.pdf - Published Version Restricted to Registered users only Download (452kB) | Request a copy |
Abstract
In this study, spray characteristics from rotary atomizers also known as slingers are investigated experimentally. This work is motivated by the demand for high energy density fuels such as fuel slurries. Aviation fuels loaded with high energy particles can exhibit variation in physical properties such as viscosity, density and surface tension. In the present study, spray characteristics of pure water, water ethanol blend, and water glycerol blend are investigated to understand the variation of physical properties on spray characteristics. A slinger of diameter 90-mm is studied with a single injection orifice of diameter 1-mm. The rotational speeds investigated in this study are 10000 and 15000 rpm. The slinger is driven by a high-speed spindle with a VFD controller. The jet visualization and spray characteristics such as breakup length and droplet size are measured using the shadowgraphy technique for both pure water and blends. For breakup length and jet visualization, imaging with a CCD camera with laser-induced fluorescent backlight is used. For droplet size measurements, a long-distance microscope (LDM) attached to a CCD camera with laser-induced fluorescent backlight is used. In this analysis, time variation of breakup length from the start of liquid feed is studied and images are acquired only after steady state of the liquid flow is achieved. Furthermore, the effects of rotational speed, liquid viscosity and liquid surface tension on SMD are studied. It is shown that non-dimensional SMD and Weber number exhibit a linear correlation in the log-log space for a range of liquid viscosity and surface tension. © 2018 Solar Turbines Incorporated.
Item Type: | Conference Paper |
---|---|
Publication: | ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems |
Publisher: | ILASS Europe, Institute for Liquid Atomization and Spray Systems |
Additional Information: | The copyright of this article belongs to ILASS Europe, Institute for Liquid Atomization and Spray Systems |
Department/Centre: | Division of Interdisciplinary Sciences > Centre for Nano Science and Engineering |
Date Deposited: | 23 Nov 2020 05:20 |
Last Modified: | 23 Nov 2020 05:20 |
URI: | http://eprints.iisc.ac.in/id/eprint/66629 |
Actions (login required)
![]() |
View Item |