Ag back electrode bonding process for inverted organic solar cells

Kim, Honggyun and Kumar, Sandeep and Kim, Og Jin and Iyer, S Sundar Kumar and Kim, Deok-kee (2019) Ag back electrode bonding process for inverted organic solar cells. In: JOURNAL OF ALLOYS AND COMPOUNDS, 777 . pp. 294-301.

PDF Jou_All_Com_777_294_2019.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy

Abstract

A new style of forming Ag back electrode for organic solar cells (OSCs) using a bonding process was compared with a conventional screen-printed Ag. All the fabrication process steps have been conducted under atmospheric conditions at room temperature without using a glove box. The OSCs with both screen-printed and bonded Ag back electrode exhibited comparable performances with the average power conversion efficiencies of 1.28% and 1.31%, respectively. The series and the shunt resistance values for the OSC with the bonded Ag were slightly better than those with the screen printed Ag. The binder resin at the interface between the PEDOT:PSS and the Ag may increase contact resistance for the screen-printed Ag process, while that between the Ag and the PET film for the bonded Ag process may not increase it. The bonding process for the Ag back electrode has the potential for future electronic device applications. (C) 2018 Elsevier B.V. All rights reserved.

Item Type:	Journal Article
Publication:	JOURNAL OF ALLOYS AND COMPOUNDS
Publisher:	ELSEVIER SCIENCE SA
Additional Information:	Copyright of this article belongs to ELSEVIER SCIENCE SA
Keywords:	Organic solar cell; Back electrode; Bonding; Screen-printing
Department/Centre:	Division of Interdisciplinary Sciences > Centre for Nano Science and Engineering
Date Deposited:	28 Jan 2019 10:22
Last Modified:	28 Jan 2019 10:22
URI:	http://eprints.iisc.ac.in/id/eprint/61517

Actions (login required)

View Item