Krishnan, Vinoadh Kumar and Sinnaeruvadi, Kumaran and Verma, Shailendra Kumar and Subramanian, Karthikeyan (2018) Microstructural characterization of field assisted sintered bulk nanostructured V-4Cr-4Ti alloys. In: PARTICULATE SCIENCE AND TECHNOLOGY, 36 (7). pp. 891-898.
Full text not available from this repository. (Request a copy)Abstract
This article deals with synthesis of single-phase bulk nanostructured V-4Cr-4Ti alloy by mechanical alloying and field assisted sintering. Mechanically alloyed powders were sintered at 1050 and 1100 degrees C with different sintering time. Both powder and sintered samples were subjected to structural and morphological characterization using x-ray diffraction and electron microscopy studies. x-ray diffraction and transmission electron microscopy studies of sintered samples confirm that field assisted sintering technique aids nanostructuring in V-4Cr-4Ti alloy. Microstructural parameters of sintered samples were calculated from x-ray diffraction patterns. Role of sintering variables on the microstrain evolution and subsequent domain size reduction in bulk V-4Cr-4Ti alloy are briefly discussed. Optimal sintering parameters to achieve nanostructured V-4Cr-4Ti alloy by field assisted sintering were deduced. Micro-hardness and relative density of sintered V-4Cr-4Ti alloy are found to increase with sintering temperature and sintering time.
| Item Type: | Journal Article |
|---|---|
| Publication: | PARTICULATE SCIENCE AND TECHNOLOGY |
| Publisher: | TAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA |
| Additional Information: | Copy right for this article belong toTAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA |
| Department/Centre: | Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy) |
| Date Deposited: | 06 Jun 2018 14:51 |
| Last Modified: | 06 Jun 2018 14:51 |
| URI: | http://eprints.iisc.ac.in/id/eprint/59971 |
Actions (login required)
 |
View Item |
