Solar-powered spike-based communication system with analog back scatter

Gaggatur, Javed S and Machnoor, Manjunath (2015) Solar-powered spike-based communication system with analog back scatter. In: IEEE Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics (PrimeAsia), NOV 27-29, 2015, Vasavi Coll Engn, Hyderabad, INDIA, pp. 127-132.

PDF IEEE_Asi_Pac_Con_Pos_Res_Mic_Ele_127_2015.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy

Abstract

Radio frequency backscatter involves the modulation of antenna load with the message signal. The information content of the message signal appears in the amplitude of the reflected signal from the antenna. The message can either be a digital signal or an analog signal. The former results in a digital backscatter communication while the latter results in an analog backscatter communication. In this paper, the analog backscatter using multiple time-spaced spike signals, which carry information of its identification and the sensor in their time separations is presented. A solar-cell powered spike generation circuit is designed and delay elements are used with the spike generator to encode the information of the identification and sensor. An HSMS2852 small signal Schottky diode is used for analog spike backscattering. A two coupler based RF cancellation technique is implemented to reduce the interference for the proposed full duplex communication system. A time-frequency analysis of the spikes carrying sensor and ID information is performed.

Item Type:	Conference Proceedings
Additional Information:	Copy right for this article belongs to the IEEE, 345 E 47TH ST, NEW YORK, NY 10017 USA
Department/Centre:	Division of Electrical Sciences > Electrical Communication Engineering
Date Deposited:	25 Aug 2016 10:15
Last Modified:	25 Aug 2016 10:15
URI:	http://eprints.iisc.ac.in/id/eprint/54546

Actions (login required)

View Item