Ezhilselvi, V and Nithin, J and Balaraju, JN and Subramanian, S (2016) The influence of current density on the morphology and corrosion properties of MAO coatings on AZ31B magnesium alloy. In: SURFACE & COATINGS TECHNOLOGY, 288 . pp. 221-229.
![]() |
PDF
Sur_Coa_Tec_288_221_2016.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy |
Abstract
Micro-arc oxidation (MAO) coatings were prepared on AZ31B magnesium alloy using alkaline silicate electrolyte at different current densities (0.026, 0.046 and 0.067 A/cm(2)). Field Emission Scanning Electron Microscopy (FESEM) analysis of the coating revealed an irregular porous structure with cracked morphology. Compositional analysis carried out for MAO coating showed the presence of almost an equal amount of Mg and 0 (34 wt.%) apart from other elements such as F, Si and AI. The cross-sectional FESEM images clearly portrayed that the MAO coating was dense along with the presence of very few fine pores. The surface roughness (R-a) of the coatings increased with an increase in the current density. Potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) studies were carried out for both the bare and MAO coated AZ31B Mg alloy in 3.5% NaCl solution. The corrosion potential (E-corr) and corrosion current density (i(corr)) values obtained for the bare substrate were -1.49 V and 46 mu A/cm(2), respectively. The coating prepared at 0.046 A/cm(2) exhibited the lowest i(corr) value of 7.79 x 10(-10) A/cm(2) and highest polarization resistance (41.6 M Omega cm(2)) attesting to the better corrosion resistance of the coating compared to other samples. EIS results also indicated almost similar corrosion behavior for the MAO coatings. Mott-Schottky analysis showed n-type and p-type semiconductor behavior for the oxide layer present on the bare magnesium alloy and MAO coatings respectively. (C) 2016 Published by Elsevier B.V.
Item Type: | Journal Article |
---|---|
Publication: | SURFACE & COATINGS TECHNOLOGY |
Publisher: | ELSEVIER SCIENCE SA |
Additional Information: | Copy right for this article belongs to the ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND |
Keywords: | Micro-arc oxidation; Surface morphology; Roughness; Corrosion; Potentiodynamic polarization; EIS |
Department/Centre: | Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy) |
Date Deposited: | 06 Apr 2016 06:56 |
Last Modified: | 06 Apr 2016 06:56 |
URI: | http://eprints.iisc.ac.in/id/eprint/53626 |
Actions (login required)
![]() |
View Item |