Fracture and R-curves in high volume fraction Al2O3/Al composites

Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. [Preprint]

Preview

PDF 5.pdf Download (1MB)

Abstract

Fracture toughness and fracture mechanisms in Al2O3/Al composites have been described. The unique flexibility offered by pressureless infiltration of molten Al-alloys into porous alumina preforms has been utilised to investigate the effect of microstructural scale and matrix properties on the fracture toughness and the shape of the crack resistance curves ( R - curves). The results indicate that the observed increment in toughness is due to crack bridging by intact matrix ligaments behind the crack tip. The deformation behaviour of the matrix, which is shown to be dependent on the microstructural constraints is the key parameter that influences both the steady state toughness and the shape of the R-curves. Previously proposed models based on crack bridging by intact ductile particles in a ceramic matrix have been modified by the inclusion of an experimentally determined plastic constraint factor (P) that determines the deformation of the ductile phase and are shown to be adequate in predicting the toughness increment in the composites. Micromechanical models to predict the crack tip profile and the bridge lengths (L) correlate well with the observed behaviour and indicate that the composites can be classified as i) short range toughened and ii) long range toughened based on their microstructural characteristics.

Item Type:	Preprint
Keywords:	Fracture;R-curves;Al2O3/Al composites;Micromechanical models;microstructural characteristics
Department/Centre:	Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	22 Aug 2008
Last Modified:	19 Sep 2010 04:12
URI:	http://eprints.iisc.ac.in/id/eprint/50

Actions (login required)

View Item