Jaya, Nagamani B and Jayaram, Vikram (2014) Crack stability in edge-notched clamped beam specimens: modeling and experiments. In: INTERNATIONAL JOURNAL OF FRACTURE, 188 (2). pp. 213-228.
![]() |
PDF
int_jou_fra_188-2_213_2014.pdf - Published Version Restricted to Registered users only Download (3MB) | Request a copy |
Abstract
Stability of a fracture toughness testing geometry is important to determine the crack trajectory and R-curve behavior of the specimen. Few configurations provide for inherent geometric stability, especially when the specimen being tested is brittle. We propose a new geometrical construction called the single edge notched clamped bend specimen (SENCB), a modified form of three point bending, yielding stable cracking under load control. It is shown to be particularly suitable for small-scale structures which cannot be made free-standing, (e.g., thin films, coatings). The SENCB is elastically clamped at the two ends to its parent material. A notch is inserted at the bottom center and loaded in bending, to fracture. Numerical simulations are carried out through extended finite element method to derive the geometrical factor f(a/W) and for different beam dimensions. Experimental corroborations of the FEM results are carried out on both micro-scale and macro-scale brittle specimens. A plot of vs a/W, is shown to rise initially and fall off, beyond a critical a/W ratio. The difference between conventional SENB and SENCB is highlighted in terms of and FEM simulated stress contours across the beam cross-section. The `s of bulk NiAl and Si determined experimentally are shown to match closely with literature values. Crack stability and R-curve effect is demonstrated in a PtNiAl bond coat sample and compared with predicted crack trajectories from the simulations. The stability of SENCB is shown for a critical range of a/W ratios, proving that it can be used to get controlled crack growth even in brittle samples under load control.
Item Type: | Journal Article |
---|---|
Publication: | INTERNATIONAL JOURNAL OF FRACTURE |
Additional Information: | Copy right for this article belongs to the SPRINGER, VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS |
Department/Centre: | Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy) |
Date Deposited: | 18 Sep 2014 09:10 |
Last Modified: | 18 Sep 2014 09:10 |
URI: | http://eprints.iisc.ac.in/id/eprint/49899 |
Actions (login required)
![]() |
View Item |