ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Solution Processed Cu2CoSnS4 Thin Films for Photovoltaic Applications

Murali, Banavoth and Madhuri, M and Krupanidhi, SB (2014) Solution Processed Cu2CoSnS4 Thin Films for Photovoltaic Applications. In: CRYSTAL GROWTH & DESIGN, 14 (8). pp. 3685-3691.

[img] PDF
cry_gro_des_14-8_3685_2014.pdf - Published Version
Restricted to Registered users only

Download (8MB) | Request a copy
Official URL: http://dx.doi.org/ 10.1021/cg500622f

Abstract

Earth abundant alternative chalcopyrite Cu2CoSnS4 (CCTS) thin films were deposited by a facile sol-gel process onto larger substrates. Temperature dependence of the process control of deposition and desired phase formations was studied in detail. Films were analyzed for complete transformation from amorphous to polycrystalline, with textured structures for stannite phase, as reflected from the X-ray diffraction and with nearly stoichiometric compositions of Cu:Co:Sn:S = 2:0:1:0:1:0:4:0 from EDAX analysis. Morphological investigations revealed that the CCTS films with larger grains, on the order of its thickness, were synthesized at higher temperature of 500 degrees C. The optimal band gap for application in photovoltaics was estimated to be 1.4 eV. Devices with SLG/CCTS/Al geometry were fabricated for real time demonstration of photoconductivity under A.M 1.5 G solar and 1064 rim infrared laser illuminations. A photodetector showed one order current amplification from similar to 1.9 X 10(-6) A in the dark to 2.2 x 10(-5) A and 9.8 X 10(-6) A under A.M 1.5 G illumination and 50 mW cm(-2) IR laser, respectively. Detector sensitivity, responsivity, external quantum efficiency, and gain were estimated as 4.2, 0.12 A/W, 14.74% and 14.77%, respectively, at 50 mW cm(-2) laser illuminations. An ON and OFF ratio of 2.5 proved that CCTS can be considered as a potential absorber in low cost photovoltaics applications.

Item Type: Journal Article
Publication: CRYSTAL GROWTH & DESIGN
Publisher: AMER CHEMICAL SOC
Additional Information: Copy right for this article belongs to the AMER CHEMICAL SOC, 1155 16TH ST, NW, WASHINGTON, DC 20036 USA
Department/Centre: Division of Chemical Sciences > Materials Research Centre
Date Deposited: 04 Sep 2014 11:04
Last Modified: 04 Sep 2014 11:04
URI: http://eprints.iisc.ac.in/id/eprint/49759

Actions (login required)

View Item View Item