Parmar, Mitesh and Rajanna, K (2012) Platinum surface additive based nanostructured CuO films for ethanol sensing. In: 2012 IEEE Sensors, 28-31 Oct. 2012, Taipei.
![]() |
PDF
IEEE_Sens_1_2012.pdf - Published Version Restricted to Registered users only Download (1MB) | Request a copy |
Abstract
In the present work, Platinum (Pt)/Copper (II) oxide (CuO) thin film based ethanol sensors were fabricated by sputtering of Pt in varying concentrations over pre-sputtered nanostructured CuO films. The responses of these sensors as a function of Pt concentrations were studied using operating temperature modulation (200-450 °C) and ethanol concentration modulation (100-2500 ppm). During these modulations, it was found that the sensing response was maximum at operating temperature near 400 °C for all the samples irrespective of the Pt concentration dispersed over them. Moreover, the sensing behavior improves for lower Pt concentration (Pt/CuO-60s) and deteriorates for higher Pt concentration (Pt/CuO-120s). In comparison with bare CuO sample, the sensitivity of Pt/CuO-60s increased up to 22% in the linear range and 33% for maximum ethanol concentration. Hence, the well dispersed optimum Pt additive concentration improves the overall sensing behavior including sensitivity, linear working range and response as well as recovery time.
Item Type: | Conference Paper |
---|---|
Publisher: | IEEE |
Additional Information: | Copyright of this article belongs to IEEE. |
Department/Centre: | Division of Physical & Mathematical Sciences > Instrumentation Appiled Physics |
Date Deposited: | 10 Feb 2014 10:22 |
Last Modified: | 10 Feb 2014 10:22 |
URI: | http://eprints.iisc.ac.in/id/eprint/48350 |
Actions (login required)
![]() |
View Item |