ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Catalytic performance of highly dispersed Ni/TiO2 for dry and steam reforming of methane

Shinde, Vijay M and Madras, Giridhar (2014) Catalytic performance of highly dispersed Ni/TiO2 for dry and steam reforming of methane. In: RSC ADVANCES, 4 (10). pp. 4817-4826.

[img] PDF
RSC_Adv_4-10_4817_2014.pdf - Published Version
Restricted to Registered users only

Download (1MB) | Request a copy
Official URL: http://dx.doi.org/10.1039/c3ra45961f

Abstract

The present study reports a sonochemical-assisted synthesis of a highly active and coke resistant Ni/TiO2 catalyst for dry and steam reforming of methane. The catalyst was characterized using XRD, TEM, XPS, BET analyzer and TGA/DTA techniques. The TEM analysis showed that Ni nanoparticles were uniformly dispersed on TiO2 surface with a narrow size distribution. The catalyst prepared via this approach exhibited excellent activity and stability for both the reactions compared to the reference catalyst prepared from the conventional wet impregnation method. For dry reforming, 86% CH4 conversion and 84% CO2 conversion was obtained at 700 degrees C. Nearly 92% CH4 conversion and 77% CO selectivity was observed under a H2O/CH4 ratio of 1.2 at 700 degrees C for the steam reforming reaction. In particular, the present catalyst is extremely active and resistant to coke formation for steam reforming at low steam/carbon ratios. There is no significant modification of Ni particles size and no coke deposition, even after a long term reaction, demonstrating its potential applicability as an industrial reformate for hydrogen production. The detailed kinetic studies have been presented for steam reforming and the mechanism involving Langmuir-Hinshelwood kinetics with adsorptive dissociation of CH4 as a rate determining step has been used to correlate the experimental data.

Item Type: Journal Article
Publication: RSC ADVANCES
Publisher: ROYAL SOC CHEMISTRY
Additional Information: Copyright for this article belongs to the ROYAL SOC CHEMISTRY, ENGLAND
Department/Centre: Division of Mechanical Sciences > Chemical Engineering
Date Deposited: 07 Feb 2014 06:44
Last Modified: 07 Feb 2014 06:44
URI: http://eprints.iisc.ac.in/id/eprint/48318

Actions (login required)

View Item View Item