Jain, AK and Ranganathan, VT (2011) Starting scheme for load commutated inverter-fed wound field synchronous machine using an auxiliary low-power voltage source inverter. In: IET Electric Power Applications, 5 (6). pp. 494-502.
![]() |
PDF
Starting_scheme.pdf - Published Version Restricted to Registered users only Download (765kB) | Request a copy |
Abstract
Conventional thyristor-based load commutated inverter (LCI)-fed wound field synchronous machine operates only above a minimum speed that is necessary to develop enough back emf to ensure commutation. The drive is started and brought up to a speed of around 10-15% by a complex `dc link current pulsing' technique. During this process, the drive have problems such as pulsating torque, insufficient average starting torque, longer starting time, etc. In this regard a simple starting and low-speed operation scheme, by employing an auxiliary low-power voltage source inverter (VSI) between the LCI and the machine terminals, is presented in this study. The drive is started and brought up to a low speed of around 15% using the VSI alone with field oriented control. The complete control is then smoothly and dynamically transferred to the conventional LCI control. After the control transfer, the VSI is turned off and physically disconnected from the main circuit. The advantages of this scheme are smooth starting, complete control of torque and flux at starting and low speeds, less starting time, stable operation, etc. The voltage rating of the required VSI is very low of the order of 10-15%, whereas the current rating is dependent on the starting torque requirement of the load. The experimental results from a 15.8 hp LCI-fed wound field synchronous machine are given to demonstrate the scheme.
Item Type: | Journal Article |
---|---|
Publication: | IET Electric Power Applications |
Publisher: | The Institution of Engineering and Technology |
Additional Information: | Copyright 2011 IEEE. Personal use of this material is permitted.However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. |
Department/Centre: | Division of Electrical Sciences > Electrical Engineering |
Date Deposited: | 01 Aug 2011 07:19 |
Last Modified: | 01 Aug 2011 07:19 |
URI: | http://eprints.iisc.ac.in/id/eprint/39606 |
Actions (login required)
![]() |
View Item |